BQ24092DGQR

@@ -1,13 +1,144 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "bq24092dgqr",+  "title": "BQ24092DGQR",+  "brief": "Texas Instruments Battery Management, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Battery Management, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "bq24092dgqr"   ],+  "component": {+    "mpn": "BQ24092DGQR",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/lit/ds/symlink/bq24092dgqr.pdf",+    "parts": {+      "symbol": "bq24092dgqr.kicad_sym",+      "footprint": "bq24092dgqr.kicad_mod",+      "model_3d": "bq24092dgqr.glb",+      "model_3d_step": "bq24092dgqr.step",+      "lbr": "bq24092dgqr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input power, connected to external DC supply (AC adapter or USB port). Absolute maximum 12 V; expected 1 \u00b5F to 10 \u00b5F bypass capacitor from IN to VSS."+      },+      {+        "number": "2",+        "name": "ISET",+        "type": "input",+        "description": "Programs the fast-charge current. External resistor from ISET to VSS defines fast-charge current (10.8 k\u03a9 = 50 mA to 540 \u03a9 = 1000 mA)."+      },+      {+        "number": "3",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground terminal. Must be tied to the same potential as PRE-TERM, ISET, ISET2, TS, CHG, PG, ASI, ASO reference, and to the exposed thermal pad."+      },+      {+        "number": "4",+        "name": "PRE-TERM",+        "type": "input",+        "description": "Programs the current termination threshold (5% to 50% of Iout set by ISET) and sets the pre-charge current to twice the termination current. Programming resistor range 1 k\u03a9 to 10 k\u03a9 (2 k\u03a9 \u2248 Ipgm/10 for termination; Ipgm/5 for precharge)."+      },+      {+        "number": "5",+        "name": "PG",+        "type": "output",+        "description": "Open-drain Power-Good output. Low (FET on) indicates the input voltage is above UVLO and greater than the OUT (battery) voltage."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect - do not make a connection to this pin (reserved for internal use). Do not route through this pin."+      },+      {+        "number": "7",+        "name": "ISET2",+        "type": "input",+        "description": "Programs the input/output current limit for the USB or adapter source: High = 500 mA max, Low = value set by ISET, Float = 100 mA max."+      },+      {+        "number": "8",+        "name": "CHG",+        "type": "output",+        "description": "Open-drain charge status output. Low (FET on) indicates charging; open (FET off) indicates no charging or charge complete. Max sink current 15 mA."+      },+      {+        "number": "9",+        "name": "TS",+        "type": "input",+        "description": "Temperature-sense input for battery NTC thermistor (10 k\u03a9 for bq24090/2/5, 100 k\u03a9 for bq24091/3 at 25 \u00b0C). Floating or pulling High puts part in TTDM Charger mode and disables TS monitoring, timers, and termination. Pulling Low disables the IC. If NTC sensing is not used, tie to VSS via a 10 k\u03a9/100 k\u03a9 resistor; a 250 k\u03a9 from TS to ground prevents TTDM when the thermistor battery is removed."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "power_out",+        "description": "Battery connection; system load may also be connected here. Average load must be low enough to allow the battery to charge within the 10-hour safety timer. Expected 1 \u00b5F to 10 \u00b5F bypass capacitor. Continuous output current up to 1.25 A absolute max."+      },+      {+        "number": "PAD",+        "name": "Thermal PAD",+        "type": "power_in",+        "description": "Exposed thermal pad. Internally connected to VSS and must be soldered to the same potential as VSS on the PCB for thermal performance. Do not use the thermal pad as the primary ground input - the VSS pin must be connected to ground at all times."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/bq24092dgqr.pdf",+        "pages": 41,+        "sha256": "834a24436defa113",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "MSOP-10-EP",+      "Category": "PMIC",+      "Pins": "11"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "bq24092dgqr"+  ],+  "discovery_pitch": "BQ24092DGQR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +156,5 @@     "docs/bq24092dgqr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file