BQ24090DGQR

@@ -1,13 +1,144 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "bq24090dgqr",+  "title": "BQ24090DGQR",+  "brief": "Texas Instruments Battery Management, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Battery Management, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "bq24090dgqr"   ],+  "component": {+    "mpn": "BQ24090DGQR",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-10-EP",+    "pin_count": 11,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/lit/ds/symlink/bq24090dgqr.pdf",+    "parts": {+      "symbol": "bq24090dgqr.kicad_sym",+      "footprint": "bq24090dgqr.kicad_mod",+      "model_3d": "bq24090dgqr.glb",+      "model_3d_step": "bq24090dgqr.step",+      "lbr": "bq24090dgqr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input power from external DC supply (AC adapter or USB port). Absolute max 12 V; recommend 1 \u00b5F to 10 \u00b5F bypass from IN to VSS."+      },+      {+        "number": "2",+        "name": "ISET",+        "type": "input",+        "description": "Fast-charge current programming input. External resistor from ISET to VSS sets the fast-charge current, valid range 10.8 k\u03a9 (50 mA) to 540 \u03a9 (1000 mA)."+      },+      {+        "number": "3",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground terminal. Must be tied to system ground and to the exposed thermal pad, which is internally connected to VSS."+      },+      {+        "number": "4",+        "name": "PRE-TERM",+        "type": "input",+        "description": "Programs the charge termination threshold (5%-50% of IOUT set by ISET) and sets the pre-charge current to 2\u00d7 the termination current. Programming resistor range 1 k\u03a9 to 10 k\u03a9 (2 k\u03a9 = IPGM/10 for termination; IPGM/5 for pre-charge)."+      },+      {+        "number": "5",+        "name": "PG",+        "type": "output",+        "description": "Open-drain Power-Good status output (active-low). Pulled low (internal FET on) when the input voltage is above UVLO and above the OUT/battery voltage. Requires external pull-up (typ. 2 k\u03a9 shown in datasheet)."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect (reserved for internal use). Do not make any external connection and do not route a trace through this pin."+      },+      {+        "number": "7",+        "name": "ISET2",+        "type": "input",+        "description": "USB/adapter input current-limit select: High = 500 mA max, Low = ISET-programmed current, FLOAT = 100 mA max."+      },+      {+        "number": "8",+        "name": "CHG",+        "type": "output",+        "description": "Open-drain charge-status output (active-low). Pulled low (internal FET on) while charging and high-Z when charging is complete or absent. Max sink current 15 mA."+      },+      {+        "number": "9",+        "name": "TS",+        "type": "input",+        "description": "Battery temperature-sense input. Connect through the battery-pack NTC thermistor (10 k\u03a9 NTC @25 \u00b0C for bq24090/2/5; 100 k\u03a9 NTC for bq24091/3). Floating or driving TS high forces TTDM Charger mode (disables TS monitoring, timers, termination); pulling low disables the IC. A 250 k\u03a9 from TS to VSS prevents entering TTDM when the thermistor is removed."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "power_out",+        "description": "Battery/system-load output. Connect the single-cell Li-Ion/Li-Pol battery here; the system load may be connected in parallel. Recommend 1 \u00b5F to 10 \u00b5F bypass; continuous current up to 1.25 A absolute max."+      },+      {+        "number": "PAD",+        "name": "Thermal PAD",+        "type": "power_in",+        "description": "Exposed thermal pad. Internally connected to VSS and must be tied to the same VSS potential on the PCB for grounding and heat sinking. Do not use the pad as the primary ground return."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/bq24090dgqr.pdf",+        "pages": 40,+        "sha256": "82ee6af1a6387d2c",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "MSOP-10-EP",+      "Category": "PMIC",+      "Pins": "11"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "bq24090dgqr"+  ],+  "discovery_pitch": "BQ24090DGQR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +156,5 @@     "docs/bq24090dgqr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file