BQ24078RGTR

@@ -53,37 +53,37 @@         "number": "1",         "name": "TS",         "type": "input",-        "description": "External NTC thermistor input monitoring 10-k\u03a9 thermistor in battery pack to prevent dangerous over-temperature conditions during charging."+        "description": "External NTC thermistor input monitoring 10-kΩ thermistor in battery pack to prevent dangerous over-temperature conditions during charging."       },       {         "number": "2",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger power stage output and battery voltage sense input for positive battery terminal; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input for positive battery terminal; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "3",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger power stage output and battery voltage sense input for positive battery terminal; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input for positive battery terminal; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge enable active-low input with internal 285-k\u03a9 pull-down; drive low to enable charging and high to suspend charging with OUT remaining active."+        "description": "Charge enable active-low input with internal 285-kΩ pull-down; drive low to enable charging and high to suspend charging with OUT remaining active."       },       {         "number": "5",         "name": "EN2",         "type": "input",-        "description": "Input current limit configuration input with internal 285-k\u03a9 pull-down; use with EN1 to select USB compliance mode and input current limit."+        "description": "Input current limit configuration input with internal 285-kΩ pull-down; use with EN1 to select USB compliance mode and input current limit."       },       {         "number": "6",         "name": "EN1",         "type": "input",-        "description": "Input current limit configuration input with internal 285-k\u03a9 pull-down; use with EN2 to select USB compliance mode and input current limit."+        "description": "Input current limit configuration input with internal 285-kΩ pull-down; use with EN2 to select USB compliance mode and input current limit."       },       {         "number": "7",@@ -107,19 +107,19 @@         "number": "10",         "name": "OUT",         "type": "output",-        "description": "System supply output providing regulated power to external load when input is valid; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System supply output providing regulated power to external load when input is valid; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "11",         "name": "OUT",         "type": "output",-        "description": "System supply output providing regulated power to external load when input is valid; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System supply output providing regulated power to external load when input is valid; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "12",         "name": "ILIM",         "type": "input",-        "description": "Adjustable current limit programming input; connect 1100-\u03a9 to 8-k\u03a9 resistor to VSS to program maximum input current when EN2=1 and EN1=0."+        "description": "Adjustable current limit programming input; connect 1100-Ω to 8-kΩ resistor to VSS to program maximum input current when EN2=1 and EN1=0."       },       {         "number": "13",@@ -131,19 +131,19 @@         "number": "14",         "name": "TMR",         "type": "input",-        "description": "Timer programming input controlling pre-charge and fast-charge safety timers; connect 18-k\u03a9 to 72-k\u03a9 resistor to VSS to program timer duration."+        "description": "Timer programming input controlling pre-charge and fast-charge safety timers; connect 18-kΩ to 72-kΩ resistor to VSS to program timer duration."       },       {         "number": "15",         "name": "SYSOFF",         "type": "input",-        "description": "System enable input with internal pull-up to VBAT (~5 M\u03a9); drive high to disconnect battery from system output and disable charging."+        "description": "System enable input with internal pull-up to VBAT (~5 MΩ); drive high to disconnect battery from system output and disable charging."       },       {         "number": "16",         "name": "ISET",         "type": "bidirectional",-        "description": "Fast charge current programming input/output; connect 590-\u03a9 to 8.9-k\u03a9 resistor to VSS to program fast charge current; output voltage monitors charging current."+        "description": "Fast charge current programming input/output; connect 590-Ω to 8.9-kΩ resistor to VSS to program fast charge current; output voltage monitors charging current."       },       {         "number": "17",@@ -163,7 +163,7 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Thermal pad is referenced as 'EXPOSED PAD 17' in the stencil example (page 42) but shown as '\u2013 \u2013' wi; PGOOD (pin 7) and CHG (pin 9) are open-drain outputs; may be more accurately classified as tri_state"+          "extractor flagged: Thermal pad is referenced as 'EXPOSED PAD 17' in the stencil example (page 42) but shown as '– –' wi; PGOOD (pin 7) and CHG (pin 9) are open-drain outputs; may be more accurately classified as tri_state"         ],         "pages_sent": 43,         "cost_usd": 0.5581,@@ -186,6 +186,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24078rgtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24078rgtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "47dc9533df6fdb7d5aee4c181077ee8e01b63dcadc92c2f05730aa7cf6da36e2",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}