← Commit history

bq24075trgtt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·d2b5403c75 · ·parent 5b496d6
2 files changed +96−16
package.json+54−14
@@ -73,31 +73,31 @@         "number": "2",         "name": "BAT",         "type": "passive",-        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7\u03bcF to 47\u03bcF ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor."       },       {         "number": "3",         "name": "BAT",         "type": "passive",-        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7\u03bcF to 47\u03bcF ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor."       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge enable active-low input internally pulled down ~285k\u03a9; pull low to enable battery charger, pull high for standby mode."+        "description": "Charge enable active-low input internally pulled down ~285kΩ; pull low to enable battery charger, pull high for standby mode."       },       {         "number": "5",         "name": "EN2",         "type": "input",-        "description": "Input current limit configuration input internally pulled down ~285k\u03a9; use with EN1 to control maximum input current and enable USB compliance."+        "description": "Input current limit configuration input internally pulled down ~285kΩ; use with EN1 to control maximum input current and enable USB compliance."       },       {         "number": "6",         "name": "EN1",         "type": "input",-        "description": "Input current limit configuration input internally pulled down ~285k\u03a9; use with EN2 to control maximum input current and enable USB compliance."+        "description": "Input current limit configuration input internally pulled down ~285kΩ; use with EN2 to control maximum input current and enable USB compliance."       },       {         "number": "7",@@ -121,43 +121,43 @@         "number": "10",         "name": "OUT",         "type": "output",-        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7\u03bcF to 47\u03bcF ceramic capacitor."+        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor."       },       {         "number": "11",         "name": "OUT",         "type": "output",-        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7\u03bcF to 47\u03bcF ceramic capacitor."+        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor."       },       {         "number": "12",         "name": "ILIM",         "type": "input",-        "description": "Adjustable current limit programming input; connect 1.07k\u03a9 to 7.5k\u03a9 resistor from ILIM to VSS to program maximum input current (EN2=1, EN1=0)."+        "description": "Adjustable current limit programming input; connect 1.07kΩ to 7.5kΩ resistor from ILIM to VSS to program maximum input current (EN2=1, EN1=0)."       },       {         "number": "13",         "name": "IN",         "type": "power_in",-        "description": "Input power connection for external DC supply (AC adapter or USB port); operating voltage range 4.35V to 6.6V; bypass to VSS with 1\u03bcF to 10\u03bcF ceramic capacitor."+        "description": "Input power connection for external DC supply (AC adapter or USB port); operating voltage range 4.35V to 6.6V; bypass to VSS with 1μF to 10μF ceramic capacitor."       },       {         "number": "14",         "name": "TMR",         "type": "input",-        "description": "Timer programming input; connect 18k\u03a9 to 72k\u03a9 resistor from TMR to VSS for custom timer duration, connect to VSS to disable timers, or leave unconnected for default values."+        "description": "Timer programming input; connect 18kΩ to 72kΩ resistor from TMR to VSS for custom timer duration, connect to VSS to disable timers, or leave unconnected for default values."       },       {         "number": "15",         "name": "SYSOFF",         "type": "input",-        "description": "System enable input internally pulled up to VBAT through ~5M\u03a9 resistor; pull high to turn off FET Q2 disconnecting battery from system output, pull low for normal operation."+        "description": "System enable input internally pulled up to VBAT through ~5MΩ resistor; pull high to turn off FET Q2 disconnecting battery from system output, pull low for normal operation."       },       {         "number": "16",         "name": "ISET",         "type": "bidirectional",-        "description": "Fast charge current programming input and current monitor output; connect 590\u03a9 to 3k\u03a9 resistor from ISET to VSS to program fast charge current; voltage on ISET reflects actual charging current."+        "description": "Fast charge current programming input and current monitor output; connect 590Ω to 3kΩ resistor from ISET to VSS to program fast charge current; voltage on ISET reflects actual charging current."       },       {         "number": "17",@@ -200,6 +200,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24075trgtt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24075trgtt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "7b5414d47bdfb6f2739fe84706ac0e6a5e3fc14d37b49221b95666164c0b1635",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -185,7 +185,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24075trgtt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24075trgtt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "7b5414d47bdfb6f2739fe84706ac0e6a5e3fc14d37b49221b95666164c0b1635",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -232,4 +272,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}