← Commit history

Initial commit: component/bq24075trgtt

Ray ·b9bb5e18c5 ·
2 files changed +265
README.mdadded+54
@@ -0,0 +1,54 @@+# BQ24075TRGTT++**Texas Instruments** · Battery Management · VQFN-16-EP(3x3)++BQ24075TRGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TS | input | External NTC thermistor input with resistor divider from VIN to GND for battery pack temperature monitoring; set divider to 20% for disabled TS function. |+| 2 | BAT | passive | Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor. |+| 3 | BAT | passive | Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor. |+| 4 | CE | input | Charge enable active-low input internally pulled down ~285kΩ; pull low to enable battery charger, pull high for standby mode. |+| 5 | EN2 | input | Input current limit configuration input internally pulled down ~285kΩ; use with EN1 to control maximum input current and enable USB compliance. |+| 6 | EN1 | input | Input current limit configuration input internally pulled down ~285kΩ; use with EN2 to control maximum input current and enable USB compliance. |+| 7 | PGOOD | output | Open-drain power good status indication output; pulls to VSS when valid input source detected (VBAT+VIN-DT < VIN < VOVP). |+| 8 | VSS | power_in | Ground pin with internal electrical connection to exposed thermal pad; connect thermal pad to circuit ground. |+| 9 | CHG | output | Open-drain charging status indication output; pulls to VSS when battery charging, high-impedance when charging complete, flashes ~2Hz for timer fault. |+| 10 | OUT | output | System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor. |+| 11 | OUT | output | System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor. |+| 12 | ILIM | input | Adjustable current limit programming input; connect 1.07kΩ to 7.5kΩ resistor from ILIM to VSS to program maximum input current (EN2=1, EN1=0). |+| 13 | IN | power_in | Input power connection for external DC supply (AC adapter or USB port); operating voltage range 4.35V to 6.6V; bypass to VSS with 1μF to 10μF ceramic capacitor. |+| 14 | TMR | input | Timer programming input; connect 18kΩ to 72kΩ resistor from TMR to VSS for custom timer duration, connect to VSS to disable timers, or leave unconnected for default values. |+| 15 | SYSOFF | input | System enable input internally pulled up to VBAT through ~5MΩ resistor; pull high to turn off FET Q2 disconnecting battery from system output, pull low for normal operation. |+| 16 | ISET | bidirectional | Fast charge current programming input and current monitor output; connect 590Ω to 3kΩ resistor from ISET to VSS to program fast charge current; voltage on ISET reflects actual charging current. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `BQ24075TRGTT`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `bq24075trgtt-etched.step` / `bq24075trgtt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq24075trgtt.step` / `bq24075trgtt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/bq24079t) (44 pp, sha256 `0c44cec8ce4f80c9`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq24075trgtt-datasheet.pdf)
page.jsonadded+211
@@ -0,0 +1,211 @@+{+  "slug": "bq24075trgtt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "bq24075trgtt",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "bq24075trgtt.kicad_sym",+    "bq24075trgtt.kicad_mod",+    "bq24075trgtt.glb",+    "bq24075trgtt.step",+    "bq24075trgtt.lbr",+    "docs/hero.png",+    "docs/bq24075trgtt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "BQ24075TRGTT",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/cn/lit/gpn/bq24079t",+    "parts": {+      "symbol": "bq24075trgtt.kicad_sym",+      "footprint": "bq24075trgtt.kicad_mod",+      "model_3d": "bq24075trgtt-etched.glb",+      "model_3d_plain": "bq24075trgtt.glb",+      "model_3d_step": "bq24075trgtt-etched.step",+      "model_3d_step_plain": "bq24075trgtt.step",+      "lbr": "bq24075trgtt.lbr"+    },+    "distributor_links": {+      "lcsc": "C2871907",+      "digikey": "296-32025-2-ND",+      "mouser": "595-BQ24075TRGTT"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T01:18:54Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-32025-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-BQ24075TRGTT",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "TS",+        "type": "input",+        "description": "External NTC thermistor input with resistor divider from VIN to GND for battery pack temperature monitoring; set divider to 20% for disabled TS function."+      },+      {+        "number": "2",+        "name": "BAT",+        "type": "passive",+        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor."+      },+      {+        "number": "3",+        "name": "BAT",+        "type": "passive",+        "description": "Charger power stage output and battery voltage sense input; bypass to VSS with 4.7μF to 47μF ceramic capacitor."+      },+      {+        "number": "4",+        "name": "CE",+        "type": "input",+        "description": "Charge enable active-low input internally pulled down ~285kΩ; pull low to enable battery charger, pull high for standby mode."+      },+      {+        "number": "5",+        "name": "EN2",+        "type": "input",+        "description": "Input current limit configuration input internally pulled down ~285kΩ; use with EN1 to control maximum input current and enable USB compliance."+      },+      {+        "number": "6",+        "name": "EN1",+        "type": "input",+        "description": "Input current limit configuration input internally pulled down ~285kΩ; use with EN2 to control maximum input current and enable USB compliance."+      },+      {+        "number": "7",+        "name": "PGOOD",+        "type": "output",+        "description": "Open-drain power good status indication output; pulls to VSS when valid input source detected (VBAT+VIN-DT < VIN < VOVP)."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin with internal electrical connection to exposed thermal pad; connect thermal pad to circuit ground."+      },+      {+        "number": "9",+        "name": "CHG",+        "type": "output",+        "description": "Open-drain charging status indication output; pulls to VSS when battery charging, high-impedance when charging complete, flashes ~2Hz for timer fault."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "output",+        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor."+      },+      {+        "number": "11",+        "name": "OUT",+        "type": "output",+        "description": "System supply output regulated to 5.5V when input below OVP threshold and above regulation voltage; bypass to VSS with 4.7μF to 47μF ceramic capacitor."+      },+      {+        "number": "12",+        "name": "ILIM",+        "type": "input",+        "description": "Adjustable current limit programming input; connect 1.07kΩ to 7.5kΩ resistor from ILIM to VSS to program maximum input current (EN2=1, EN1=0)."+      },+      {+        "number": "13",+        "name": "IN",+        "type": "power_in",+        "description": "Input power connection for external DC supply (AC adapter or USB port); operating voltage range 4.35V to 6.6V; bypass to VSS with 1μF to 10μF ceramic capacitor."+      },+      {+        "number": "14",+        "name": "TMR",+        "type": "input",+        "description": "Timer programming input; connect 18kΩ to 72kΩ resistor from TMR to VSS for custom timer duration, connect to VSS to disable timers, or leave unconnected for default values."+      },+      {+        "number": "15",+        "name": "SYSOFF",+        "type": "input",+        "description": "System enable input internally pulled up to VBAT through ~5MΩ resistor; pull high to turn off FET Q2 disconnecting battery from system output, pull low for normal operation."+      },+      {+        "number": "16",+        "name": "ISET",+        "type": "bidirectional",+        "description": "Fast charge current programming input and current monitor output; connect 590Ω to 3kΩ resistor from ISET to VSS to program fast charge current; voltage on ISET reflects actual charging current."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: ILIM pin marked as output (O) in I/O column but described as 'Adjustable Current Limit Programming I"+        ],+        "pages_sent": 44,+        "cost_usd": 0.5057,+        "at": "2026-09-27T01:18:37"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/bq24079t",+        "pages": 44,+        "sha256": "0c44cec8ce4f80c9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file