BQ24075RGTR

@@ -53,37 +53,37 @@         "number": "1",         "name": "TS",         "type": "input",-        "description": "External NTC Thermistor Input connected to 10 k\u03a9 NTC thermistor in battery pack for battery temperature monitoring during charging."+        "description": "External NTC Thermistor Input connected to 10 kΩ NTC thermistor in battery pack for battery temperature monitoring during charging."       },       {         "number": "2",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect positive terminal of battery with 4.7-\u03bcF to 47-\u03bcF ceramic bypass capacitor to VSS."+        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect positive terminal of battery with 4.7-μF to 47-μF ceramic bypass capacitor to VSS."       },       {         "number": "3",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect positive terminal of battery with 4.7-\u03bcF to 47-\u03bcF ceramic bypass capacitor to VSS."+        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect positive terminal of battery with 4.7-μF to 47-μF ceramic bypass capacitor to VSS."       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge Enable Active-Low Input internally pulled down approximately 285 k\u03a9; high disables charging, low enables charging."+        "description": "Charge Enable Active-Low Input internally pulled down approximately 285 kΩ; high disables charging, low enables charging."       },       {         "number": "5",         "name": "EN2",         "type": "input",-        "description": "Input Current Limit Configuration Input internally pulled down approximately 285 k\u03a9; used with EN1 to control maximum input current per Table 7-2."+        "description": "Input Current Limit Configuration Input internally pulled down approximately 285 kΩ; used with EN1 to control maximum input current per Table 7-2."       },       {         "number": "6",         "name": "EN1",         "type": "input",-        "description": "Input Current Limit Configuration Input internally pulled down approximately 285 k\u03a9; used with EN2 to control maximum input current per Table 7-2."+        "description": "Input Current Limit Configuration Input internally pulled down approximately 285 kΩ; used with EN2 to control maximum input current per Table 7-2."       },       {         "number": "7",@@ -107,43 +107,43 @@         "number": "10",         "name": "OUT",         "type": "power_out",-        "description": "System Supply Output providing regulated output when input below overvoltage protection threshold; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System Supply Output providing regulated output when input below overvoltage protection threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "11",         "name": "OUT",         "type": "power_out",-        "description": "System Supply Output providing regulated output when input below overvoltage protection threshold; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System Supply Output providing regulated output when input below overvoltage protection threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "12",         "name": "ILIM",         "type": "input",-        "description": "Adjustable Current Limit Programming Input; connect 1100-\u03a9 to 8000-\u03a9 resistor from ILIM to VSS to program maximum input current limit."+        "description": "Adjustable Current Limit Programming Input; connect 1100-Ω to 8000-Ω resistor from ILIM to VSS to program maximum input current limit."       },       {         "number": "13",         "name": "IN",         "type": "power_in",-        "description": "Input Power Connection accepting 4.35-V to 6.4-V DC supply from USB or AC adapter; bypass with 1-\u03bcF to 10-\u03bcF capacitor to VSS."+        "description": "Input Power Connection accepting 4.35-V to 6.4-V DC supply from USB or AC adapter; bypass with 1-μF to 10-μF capacitor to VSS."       },       {         "number": "14",         "name": "TMR",         "type": "input",-        "description": "Timer Programming Input controlling pre-charge and fast-charge safety timers; connect 18-k\u03a9 to 72-k\u03a9 resistor to VSS to program timer duration."+        "description": "Timer Programming Input controlling pre-charge and fast-charge safety timers; connect 18-kΩ to 72-kΩ resistor to VSS to program timer duration."       },       {         "number": "15",         "name": "SYSOFF",         "type": "input",-        "description": "System Enable Input; connect high to turn off FET connecting battery to system output, internally pulled to VBAT through approximately 5 M\u03a9 resistor."+        "description": "System Enable Input; connect high to turn off FET connecting battery to system output, internally pulled to VBAT through approximately 5 MΩ resistor."       },       {         "number": "16",         "name": "ISET",         "type": "bidirectional",-        "description": "Fast Charge Current Programming Input; connect 590-\u03a9 to 8900-\u03a9 resistor to VSS to program fast charge current; voltage reflects actual charging current for monitoring."+        "description": "Fast Charge Current Programming Input; connect 590-Ω to 8900-Ω resistor to VSS to program fast charge current; voltage reflects actual charging current for monitoring."       },       {         "number": "17",@@ -186,6 +186,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24075rgtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24075rgtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ab47277c061dc9726878a07162fa76de2a762a7e83a7d1b89b18f47f83fe3c4a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}