BQ24072RGTR

@@ -1,13 +1,180 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "bq24072rgtr",+  "title": "BQ24072RGTR",+  "brief": "Texas Instruments Battery Management, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Battery Management, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "bq24072rgtr"   ],+  "component": {+    "mpn": "BQ24072RGTR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/lit/ds/symlink/bq24072.pdf",+    "parts": {+      "symbol": "bq24072rgtr.kicad_sym",+      "footprint": "bq24072rgtr.kicad_mod",+      "model_3d": "bq24072rgtr.glb",+      "model_3d_step": "bq24072rgtr.step",+      "lbr": "bq24072rgtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TS",+        "type": "input",+        "description": "External NTC thermistor input. Connect to a 10-k\u03a9 NTC thermistor in the battery pack; monitors pack temperature and pauses charging when out of range. Tie to VSS through a 10-k\u03a9 fixed resistor if unused."+      },+      {+        "number": "2",+        "name": "BAT",+        "type": "power_out",+        "description": "Charger power-stage output and battery voltage-sense input. Connect to the positive terminal of the 1-cell Li-Ion battery and bypass to VSS with a 4.7-\u00b5F to 47-\u00b5F ceramic capacitor. Pins 2 and 3 must be tied together."+      },+      {+        "number": "3",+        "name": "BAT",+        "type": "power_out",+        "description": "Charger power-stage output and battery voltage-sense input (see pin 2). Pins 2 and 3 must be tied together."+      },+      {+        "number": "4",+        "name": "CE",+        "type": "input",+        "description": "Charge Enable active-low input. Drive low to enable charging; drive high to disable charging (OUT and battery supplement mode remain available). Internally pulled down (~285 k\u03a9); must not be left floating."+      },+      {+        "number": "5",+        "name": "EN2",+        "type": "input",+        "description": "Input Current Limit configuration input (MSB). Together with EN1 selects USB100 / USB500 / ILIM-resistor / Standby modes (see EN1/EN2 table). Internally pulled down (~285 k\u03a9); do not leave floating."+      },+      {+        "number": "6",+        "name": "EN1",+        "type": "input",+        "description": "Input Current Limit configuration input (LSB). Together with EN2 selects USB100 / USB500 / ILIM-resistor / Standby modes. Internally pulled down (~285 k\u03a9); do not leave floating."+      },+      {+        "number": "7",+        "name": "PGOOD",+        "type": "output",+        "description": "Open-drain Power-Good status output. Pulls to VSS when a valid input source is detected on IN; high-impedance otherwise. Pull up to a logic rail through 1 k\u03a9-100 k\u03a9, or drive an indicator LED."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Device ground. Must be connected to the ground rail of the circuit and to the exposed thermal pad."+      },+      {+        "number": "9",+        "name": "CHG",+        "type": "output",+        "description": "Open-drain charge-status indicator output (active-low, CHG-bar). Pulls to VSS while the battery is charging; high-impedance when charging is complete or disabled. Pull up to logic rail through 1 k\u03a9-100 k\u03a9 or use with an LED."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "power_out",+        "description": "System supply output from the power-path stage. Regulated when the input is within the valid operating range; otherwise tracks V_BAT. Bypass to VSS with 4.7-\u00b5F to 47-\u00b5F ceramic capacitor. Pins 10 and 11 must be tied together."+      },+      {+        "number": "11",+        "name": "OUT",+        "type": "power_out",+        "description": "System supply output (see pin 10). Pins 10 and 11 must be tied together."+      },+      {+        "number": "12",+        "name": "ILIM",+        "type": "input",+        "description": "Adjustable current-limit programming input. Connect a 1100-\u03a9 to 8-k\u03a9 resistor from ILIM to VSS to set the maximum input current when EN2=1, EN1=0. Leave floating to disable all charging."+      },+      {+        "number": "13",+        "name": "IN",+        "type": "power_in",+        "description": "Input power connection from an AC adapter or USB port. Operating range 4.35 V to 6.6 V (BQ24072); withstands up to 26 V without damage (operation suspended above OVP). Bypass to VSS with a 1-\u00b5F to 10-\u00b5F ceramic capacitor."+      },+      {+        "number": "14",+        "name": "TMR",+        "type": "input",+        "description": "Safety-timer programming input. Connect an 18-k\u03a9 to 72-k\u03a9 resistor from TMR to VSS to set the pre-charge and fast-charge timers; tie to VSS to disable all safety timers; leave open for default timer values."+      },+      {+        "number": "15",+        "name": "TD",+        "type": "input",+        "description": "Termination Disable input. Drive high to disable charge termination; tie to VSS to enable termination. Sampled only at startup and cannot be changed during operation. Internally pulled down (~285 k\u03a9); do not leave floating."+      },+      {+        "number": "16",+        "name": "ISET",+        "type": "bidirectional",+        "description": "Fast-charge current programming input / monitor. Connect a 590-\u03a9 to 8.9-k\u03a9 resistor from ISET to VSS to set fast-charge current. Voltage at ISET mirrors the actual charge current and can be used to monitor it. Leaving open disables charging."+      },+      {+        "number": "17",+        "name": "PAD",+        "type": "power_in",+        "description": "Exposed thermal pad on package underside. Internally connected to VSS; must be soldered to the PCB ground plane for thermal dissipation and tied to the same potential as pin 8. Do not use as the primary ground input - VSS pin must also be grounded."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/bq24072.pdf",+        "pages": 53,+        "sha256": "05585ca0112a74b0",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "QFN-16-EP(3x3)",+      "Category": "PMIC",+      "Pins": "17"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "bq24072rgtr"+  ],+  "discovery_pitch": "BQ24072RGTR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +192,5 @@     "docs/bq24072rgtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file