BQ24070RHLR

@@ -1,13 +1,198 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "bq24070rhlr",+  "title": "BQ24070RHLR",+  "brief": "Texas Instruments Battery Management, QFN-20-EP(3.7x4.7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Battery Management, QFN-20-EP(3.7x4.7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "bq24070rhlr"   ],+  "component": {+    "mpn": "BQ24070RHLR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-20-EP(3.7x4.7)",+    "pin_count": 20,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/lit/ds/symlink/bq24070rhlr.pdf",+    "parts": {+      "symbol": "bq24070rhlr.kicad_sym",+      "footprint": "bq24070rhlr.kicad_mod",+      "model_3d": "bq24070rhlr.glb",+      "model_3d_step": "bq24070rhlr.step",+      "lbr": "bq24070rhlr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VREF",+        "type": "power_out",+        "description": "Internal 3.3 V reference output. Active only when AC or USB input is present. Output current up to 20 mA; 0.1 \u00b5F decoupling capacitor recommended."+      },+      {+        "number": "2",+        "name": "STAT1",+        "type": "output",+        "description": "Charge status output 1 (open-drain). Requires external pullup (\u22651 k\u03a9). VOL \u2264 0.25 V at 5 mA."+      },+      {+        "number": "3",+        "name": "STAT2",+        "type": "output",+        "description": "Charge status output 2 (open-drain). Requires external pullup (\u22651 k\u03a9). Combined with STAT1 to encode charge state."+      },+      {+        "number": "4",+        "name": "IN",+        "type": "power_in",+        "description": "Charge input voltage from AC adapter or USB source. Operating range 4.35-16 V (abs max 18 V). Input current limited to 2 A."+      },+      {+        "number": "5",+        "name": "BAT",+        "type": "bidirectional",+        "description": "Battery input and output. Connects to single-cell Li-Ion/Li-Polymer pack positive terminal. Regulates to 4.2 V during charge; sources system current in battery mode. Pins 5 and 6 must be tied together externally."+      },+      {+        "number": "6",+        "name": "BAT",+        "type": "bidirectional",+        "description": "Battery input and output. Second BAT pin - tie to pin 5. Handles up to 3.5 A source / 4 A sink current."+      },+      {+        "number": "7",+        "name": "ISET2",+        "type": "input",+        "description": "USB charge current set point. High = 500 mA fast charge, Low = 100 mA charge. Also selects half-charge current mode."+      },+      {+        "number": "8",+        "name": "MODE",+        "type": "input",+        "description": "Power-source selection input. Low = USB mode current limit (defaults to USB charging); High = AC adapter mode (charges at ISET1 rate). VIL \u2248 1 V, VIH \u2248 1.024 V (small hysteresis, ~24 mV)."+      },+      {+        "number": "9",+        "name": "CE",+        "type": "input",+        "description": "Chip enable input (active high). Logic-level input; VIL \u2264 0.4 V, VIH \u2265 1.4 V. CE-holdoff time 3.3-6.2 ms."+      },+      {+        "number": "10",+        "name": "ISET1",+        "type": "bidirectional",+        "description": "Charge current set point (RSET to VSS) and precharge/termination set point. VSET typ 2.5 V; KSET \u2248 425 for 100 mA-1.5 A range. Also used to monitor charge current."+      },+      {+        "number": "11",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin electrically connected to the exposed thermal pad. Must be tied to board ground; do not rely on the thermal pad alone as the primary ground return."+      },+      {+        "number": "12",+        "name": "TS",+        "type": "bidirectional",+        "description": "Battery temperature sense input. Compared against V(LTF)=2.5 V and V(HTF)=0.5 V thresholds using a 100 \u00b5A current source. Connects to a battery-pack NTC thermistor."+      },+      {+        "number": "13",+        "name": "DPPM",+        "type": "input",+        "description": "Dynamic power-path management set point (RDPPM to VSS). Programs the OUT regulation set point via a 100 \u00b5A current source; SF scale factor \u2248 1.150."+      },+      {+        "number": "14",+        "name": "TMR",+        "type": "bidirectional",+        "description": "Timer program input (RTMR to VSS, 30-100 k\u03a9). Sets fast-charge timer via KTMR \u2248 0.36 s/\u03a9. Tie to VREF to disable the safety timer and charge termination."+      },+      {+        "number": "15",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated system output. bq24070 variant regulates to 4.4 V. Output current up to 4 A absolute max. Pins 15/16/17 must be tied together on the PCB."+      },+      {+        "number": "16",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated system output. Tie to pins 15 and 17. Carries system load current from AC/USB input or battery."+      },+      {+        "number": "17",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated system output. Tie to pins 15 and 16."+      },+      {+        "number": "18",+        "name": "PG",+        "type": "output",+        "description": "Power-good status output (open-drain, active low). Requires external pullup (\u22651 k\u03a9). VOL \u2264 0.25 V at 5 mA."+      },+      {+        "number": "19",+        "name": "GND",+        "type": "power_in",+        "description": "Ground input. Tie to pin 20 and system ground."+      },+      {+        "number": "20",+        "name": "GND",+        "type": "power_in",+        "description": "Ground input. Tie to pin 19 and system ground."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/bq24070rhlr.pdf",+        "pages": 31,+        "sha256": "b3910527d343126b",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "QFN-20-EP(3.7x4.7)",+      "Category": "PMIC",+      "Pins": "20"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "bq24070rhlr"+  ],+  "discovery_pitch": "BQ24070RHLR (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +210,5 @@     "docs/bq24070rhlr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file