component
BMI055
Public Made by Adomby adom
Bosch Sensortec Attitude Sensor/Gyroscope, LGA-16(3x4.5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -56,7 +56,7 @@ "number": "5", "name": "CSB2", "type": "input",- "description": "Gyroscope SPI chip-select (active-low). In I\u00b2C mode this pin is not used and must be left floating (DNC)."+ "description": "Gyroscope SPI chip-select (active-low). In I²C mode this pin is not used and must be left floating (DNC)." }, { "number": "6",@@ -68,25 +68,25 @@ "number": "7", "name": "PS", "type": "input",- "description": "Protocol select input. Tie to GND for SPI interface mode, or tie directly to VDDIO for I\u00b2C mode. Must be a solid electrical connection for reliable protocol selection."+ "description": "Protocol select input. Tie to GND for SPI interface mode, or tie directly to VDDIO for I²C mode. Must be a solid electrical connection for reliable protocol selection." }, { "number": "8", "name": "SCx", "type": "input",- "description": "Serial clock: SPI SCK in SPI 4W/3W mode, I\u00b2C SCL in I\u00b2C mode. Digital input driven by the host."+ "description": "Serial clock: SPI SCK in SPI 4W/3W mode, I²C SCL in I²C mode. Digital input driven by the host." }, { "number": "9", "name": "SDx", "type": "bidirectional",- "description": "Serial data I/O. SPI 4W: SDI (data in). SPI 3W: SDA (bidirectional). I\u00b2C: SDA (bidirectional)."+ "description": "Serial data I/O. SPI 4W: SDI (data in). SPI 3W: SDA (bidirectional). I²C: SDA (bidirectional)." }, { "number": "10", "name": "SDO2", "type": "bidirectional",- "description": "Gyroscope SPI serial data out (SPI 4-wire). In I\u00b2C mode this pin selects the gyroscope I\u00b2C address (tie to GND for default address). In SPI 3-wire mode leave floating (DNC)."+ "description": "Gyroscope SPI serial data out (SPI 4-wire). In I²C mode this pin selects the gyroscope I²C address (tie to GND for default address). In SPI 3-wire mode leave floating (DNC)." }, { "number": "11",@@ -110,13 +110,13 @@ "number": "14", "name": "CSB1", "type": "input",- "description": "Accelerometer SPI chip-select (active-low). In I\u00b2C mode this pin is not used and must be left floating (DNC)."+ "description": "Accelerometer SPI chip-select (active-low). In I²C mode this pin is not used and must be left floating (DNC)." }, { "number": "15", "name": "SDO1", "type": "bidirectional",- "description": "Accelerometer SPI serial data out (SPI 4-wire). In I\u00b2C mode this pin selects the accelerometer I\u00b2C address (tie to GND for default address). In SPI 3-wire mode leave floating (DNC)."+ "description": "Accelerometer SPI serial data out (SPI 4-wire). In I²C mode this pin selects the accelerometer I²C address (tie to GND for default address). In SPI 3-wire mode leave floating (DNC)." }, { "number": "16",@@ -186,5 +186,8 @@ "docs/bmi055-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }