bl8568gcb5atr15

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "BL8568GCB5ATR15",+    "manufacturer": "BL Shanghai Belling",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "bl8568gcb5atr15.kicad_sym",+      "footprint": "bl8568gcb5atr15.kicad_mod",+      "model_3d": "bl8568gcb5atr15-etched.glb",+      "model_3d_plain": "bl8568gcb5atr15.glb",+      "model_3d_step": "bl8568gcb5atr15-etched.step",+      "model_3d_step_plain": "bl8568gcb5atr15.step",+      "lbr": "bl8568gcb5atr15.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "Vin",+        "type": "power_in",+        "description": "Supply voltage input. Recommended operating range 2.0V-6V (absolute max 8V). A 1µF ceramic input capacitor to Vss is recommended in all application circuits."+      },+      {+        "number": "2",+        "name": "Vss",+        "type": "power_in",+        "description": "Device ground / negative supply return. Reference for Vin, Vout and CE. When CE is tied to Vss the device enters standby (Istandby = 0.1µA typ)."+      },+      {+        "number": "3",+        "name": "CE",+        "type": "input",+        "description": "Chip Enable logic input. Vceh ≥ 1.0V (up to Vin) enables the regulator; Vcel ≤ 0.5V disables it and engages the ~1.5kΩ output discharge. Integrated ~500kΩ internal pull-down (Rcepd) - do not leave floating in noisy environments; drive from a valid logic source."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connection. Leave floating or, for best PCB robustness, tie to Vss. Not internally bonded."+      },+      {+        "number": "5",+        "name": "Vout",+        "type": "power_out",+        "description": "Regulated output voltage (1.5V for the -15 ordering suffix). Delivers up to 300mA (typ) with 500mA current limit; dropout 65mV @100mA / 195mV @300mA at Vout=3.3V. Requires a 1µF ceramic output capacitor to Vss for stability. When CE is low, Vout is actively discharged through the internal ~1.5kΩ resistor."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}