component
BL24CM1A-PARC
Public Made by Adomby adom
BL Shanghai Belling EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "bl24cm1a-parc",+ "title": "BL24CM1A-PARC",+ "brief": "BL Shanghai Belling EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "BL Shanghai Belling EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "bl24cm1a-parc" ],+ "component": {+ "mpn": "BL24CM1A-PARC",+ "manufacturer": "BL Shanghai Belling",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/905fc3d02f6860f4455be03c1b6c306f.pdf",+ "parts": {+ "symbol": "bl24cm1a-parc.kicad_sym",+ "footprint": "bl24cm1a-parc.kicad_mod",+ "model_3d": "bl24cm1a-parc.glb",+ "model_3d_step": "bl24cm1a-parc.step",+ "lbr": "bl24cm1a-parc.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to GND for best noise immunity."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Device address input bit 1. Hard-wired to VCC or GND to select one of up to four BL24CM1A devices on the same I2C bus. Internally biased to logic low if left floating (proprietary internal bias)."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Device address input bit 2. Hard-wired to VCC or GND to select one of up to four BL24CM1A devices on the same I2C bus. Internally biased to logic low if left floating."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for supply and all logic signals."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data. Bidirectional, open-drain; requires an external pull-up resistor to VCC. May be wire-ORed with other open-drain/open-collector devices on the same bus."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input, up to 400 kHz at VCC >= 2.0 V. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-trigger, filtered input."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Hardware write-protect input. Tie to GND for normal read/write operation; tie to VCC to write-protect the full 1024K array (see Table 2). Schmitt-trigger, filtered input."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply, single-supply operation down to 2.0 V (up to 400 kHz at 2.0 V). Decouple to GND with a 100 nF ceramic capacitor placed close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/905fc3d02f6860f4455be03c1b6c306f.pdf",+ "pages": 20,+ "sha256": "90c054d62d989bfb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "BL Shanghai Belling",+ "Package": "SOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "bl24cm1a-parc"+ ],+ "discovery_pitch": "BL24CM1A-PARC (BL Shanghai Belling) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/bl24cm1a-parc-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }