☰
bl1117-18cx: footprint pads join the pin-hover bus with the symbol (4 pads)
bl1117-18cx: hero from the plain model
bl1117-18cx: one-pass backfill (courtyard 63.36 -> 57.13 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang…
bl1117-18cx: one-pass backfill (ratings: VIN recommended_operating 12 V p.2)
bl1117-18cx: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain ST…
bl1117-18cx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
bl1117-18cx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
bl1117-18cx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout")
bl1117-18cx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
bl1117-18cx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
bl1117-18cx: publish the laser-etched STEP alongside the bare one
fix ordering variants: suffix was duplicated into the MPN
rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an…
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <te…
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
fix footprint: SOT-223 -> SOT-223-3_TabPin2 (symbol has pins 1,2,3; the old footprint left pad(s) 4 with no net)
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
fix footprint: SOT-223-3_TabPin2 -> SOT-223 (pad_count, 4 pins)
bl1117-18cx: factory component page (tier=lcsc)
Initial commit: component/bl1117-18cx