component
BD94121F-GE2
Public Made by Adomby adom
ROHM Semicon LED Drivers, SOP-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
8 files changed
+23838
diff truncated
README.mdadded+117@@ -0,0 +1,117 @@+# BD94121F-GE2++**ROHM Semicon** · LED Drivers · SOP-18-300mil++BD94121F-GE2 from ROHM Semicon, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | IC supply pin with built-in UVLO, normal operating range 9.0 V to 18.0 V (typ), absolute rating -0.3 to +20 V, bypass with a ceramic capacitor greater than 0.1 µF to GND. |+| 2 | STB | input | Power ON/OFF control: IC is on when STB is high (2.0 V to VCC) and off when low (-0.3 to +0.8 V), keep STB below VCC and below 4 V if applied before VCC, absolute rating -0.3 to +20 V. |+| 3 | GND | power_in | Signal ground for the internal IC circuits, recommended to be kept independent from PGND to reduce switching noise influence. |+| 4 | RT | output | Drive frequency setting pin, basic frequency is set by resistor RRT to GND (20 to 200 kΩ recommended), frequency modulation range is set by RADJ between RT and FB, absolute rating -0.3 to +5.5 V. |+| 5 | FB | output | Error amplifier output for LED current and LED voltage feedback, the capacitors to IS and VS (1500 pF to 0.01 µF) set phase compensation and start-up time, absolute rating -0.3 to +5.5 V. |+| 6 | IS | input | Error amplifier input for LED current feedback, IS threshold voltage 1 is 0.466 V to 0.488 V at VADIM = 2.1 V, absolute rating -0.3 to +5.5 V. |+| 7 | VS | power_in | Error amplifier input for LED open-voltage feedback, VS threshold voltage is 1.212 V to 1.288 V (1.25 V typ), absolute rating -0.3 to +5.5 V. |+| 8 | PWMCMP | input | PWM comparator input for brightness adjustment, N1 and N2 outputs stop when PWMCMP is low and output maximum duty when high, absolute rating -0.3 to +5.5 V. |+| 9 | CP | output | Timer latch setting pin, 1 µA (typ) is charged into the connected capacitor in an abnormal case and the IC latches after output stops when CP exceeds 2 V (typ), absolute rating -0.3 to +5.5 V. |+| 10 | PWMIN | input | PWM signal input for burst brightness adjustment, high level 1.8 V to 5.0 V, low level -0.3 V to +0.8 V, input frequency 60 to 500 Hz, absolute rating -0.3 to +5.5 V. |+| 11 | ADIM | input | DC signal input for analog dimming, input voltage range 0 to 5 V with linearity specified from 0.5 V to 2.1 V, absolute rating -0.3 to +5.5 V. |+| 12 | SS | output | Soft start and COMPSD timer setting pin, 2 µA (typ) is charged into the connected capacitor during start-up, recommended capacitance 0.01 to 0.1 µF, absolute rating -0.3 to +5.5 V. |+| 13 | FAIL | output | Error indication output, normal is L and error is open, FAIL ON-resistance is 100 Ω (typ), absolute rating -0.3 to +5.5 V. |+| 14 | COMPSD | input | Abnormal overvoltage detection pin, output operation stops and the IC latches after 2 clocks when abnormality is detected, COMPSD detection voltage is 3.88 V to 4.12 V (4.00 V typ), absolute rating -0.3 to +5.5 V. |+| 15 | PWM2DC | input | Pulse-to-DC conversion pin, the pulse signal is converted to a flat DC level through the internal 100 kΩ resistor and the capacitor on ADIM, input frequency range 0.09 to 30 kHz, absolute rating -0.3 to +20 V. |+| 16 | PGND | power_in | Power ground for the external MOSFET drive circuit, to be kept independent from signal GND (pin 3), no numeric rating is given for this pin. |+| 17 | N2 | output | Output pin for the external FET drive circuit (channel N2), sink resistance 3.0 Ω (typ) and source resistance 9.0 Ω (typ), absolute rating -0.3 to +20 V. |+| 18 | N1 | output | Output pin for the external FET drive circuit (channel N1), sink resistance 3.0 Ω (typ) and source resistance 9.0 Ω (typ), absolute rating -0.3 to +20 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ROHM Semicon |+| Package | SOP-18-300mil |+| Category | Display Modules / LED Drivers / Display Drivers |+| Pins | 18 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply Voltage | VCC | | | 20 | V | | 3 |+| Terminal Voltage STB, PWM2DC, N2, N1 | VSTB,VPWM2DC,VN2,VN1 | | | 20 | V | | 3 |+| Terminal Voltage RT, FB, IS, VS, PWMCMP, CP, PWMIN, ADIM, SS, FAIL, COMPSD | VRT,VFB,VIS,VVS,VPWMCMP,VCP,VPWMIN,VADIM,VSS,VFAIL,VCOMPSD | | | 5.5 | V | | 3 |+| Power Dissipation | Pd | | | 0.69 | W | Note 1: mounted on 1-layer 70.0mm x 70.0mm x 1.6mm board | 3 |+| Operating Temperature Range | Topr | -40 | | 85 | °C | | 3 |+| Junction Temperature | Tjmax | | | 150 | °C | | 3 |+| Storage Temperature Range | Tstg | -55 | | 150 | °C | | 3 |+| Power Dissipation derating | Pd | | 5.5 | | mW/°C | Derating for operation above Ta≥25°C (Note 1) | 3 |+| Power Supply Voltage | VCC | 9 | | 18 | V | Ta=-40°C to +85°C | 3 |+| PWMIN Input Frequency Range | fPWMIN | 60 | | 500 | Hz | Ta=-40°C to +85°C | 3 |+| Oscillation Frequency | fOUT | 30 | | 300 | kHz | Ta=-40°C to +85°C | 3 |+| PWM2DC Input Voltage Range | fPWM2DC | 0.09 | | 30 | kHz | Ta=-40°C to +85°C | 3 |+| ADIM Input Voltage Range | VADIM | 0 | | 5 | V | Ta=-40°C to +85°C | 3 |+| ADIM Range with Linearity IS | VADIMLIN | 0.5 | | 2.1 | V | Ta=-40°C to +85°C | 3 |+| RT Connection Resistance | RRT | 20 | | 200 | kΩ | External components recommended range, Ta=-40°C to +85°C | 3 |+| CP Connection Capacitance | CCP | 0.01 | | 2.2 | µF | Note 2: set above min per temperature and DC bias characteristic | 3 |+| ADIM Connection Capacitance | CADIM | 0.22 | | 10 | µF | Note 2: set above min per temperature and DC bias characteristic | 3 |+| SS Connection Capacitance | CSS | 0.01 | | 0.1 | µF | Note 2: set above min per temperature and DC bias characteristic | 3 |+| Circuit Current | ICC1 | | 2.3 | 5 | mA | fOUT=60kHz, VPWMCOMP=0V | 4 |+| Circuit Current at Stand-by | ICC2 | | 0 | 20 | µA | VSTB=0V | 4 |+| STB Pin High Voltage | VSTH | 2 | | | V | System ON | 4 |+| STB Pin Low Voltage | VSTL | -0.3 | | 0.8 | V | System OFF | 4 |+| VCC Operation Voltage | VVCCUVP | 7.5 | 8 | 8.5 | V | | 4 |+| VCC UVLO Hysteresis | ⊿VVCCUVP | 0.37 | 0.5 | 0.63 | V | | 4 |+| RT Terminal voltage | VRT | 1.05 | 1.5 | 1.95 | V | | 4 |+| PWMIN Pin High Voltage | VPWMINH | 1.8 | | 5 | V | | 4 |+| PWMIN Pin Low Voltage | VPWMINL | -0.3 | | 0.8 | V | | 4 |+| Setting Current for Soft Start Timer and COMPSD Timer | ISS | 1.5 | 2 | 2.5 | µA | | 4 |+| Soft Start Ended Voltage | VSSEND | 2.3 | 2.5 | 2.7 | V | | 4 |+| Setting Voltage for COMPSD Timer | VSDON | 1.9 | 2 | 2.1 | V | | 4 |+| IS Threshold Voltage 1 | VIS1 | 0.466 | 0.477 | 0.488 | V | VADIM=2.1V, VPWM2DC=12V | 4 |+| IS Threshold Voltage 2 | VIS2 | 0.239 | 0.25 | 0.261 | V | VADIM=1.1V, VPWM2DC=12V | 4 |+| IS Threshold Voltage 3 | VIS3 | 0.102 | 0.114 | 0.126 | V | VADIM=0.5V, VPWM2DC=12V | 4 |+| IS Threshold Voltage 4 | VVS | 1.212 | 1.25 | 1.288 | V | | 4 |+| IS Source Current 1 | IIS1 | | | 0.9 | µA | VPWMIN=2.5V | 4 |+| IS Source Current 2 | IIS2 | 40 | 50 | 60 | µA | VPWMIN=0V, VIS=0.8V | 4 |+| VS Source Voltage | IVS | | | 0.9 | µA | | 4 |+| IS COMP Detection Voltage 1 | VISCOMP1 | 0.02 | 0.05 | 0.08 | V | IS sweep down, VADIM=0.4V | 4 |+| IS COMP Detection Voltage 2 | VISCOMP2 | 0.9 | 1 | 1.1 | V | IS sweep up | 4 |+| N1 Output Sink Resistance | RN1SI | 1.5 | 3 | 6 | Ω | | 5 |+| N1 Output Source Resistance | RN1SO | 4.5 | 9 | 18 | Ω | | 5 |+| N2 Output Sink Resistance | RN2SI | 1.5 | 3 | 6 | Ω | | 5 |+| N2 Output Source Resistance | RN2SO | 4.5 | 9 | 18 | Ω | | 5 |+| MAX DUTY | MAX DUTY | 43 | 45 | 47 | % | fOUT=60kHz | 5 |+| N1-N2, N2-N1 Dead Time | tOFF | 100 | 200 | 400 | ns | | 5 |+| Output Frequency (minimum frequency setting) | fOUTMIN | 60.3 | 67 | 73.7 | kHz | RRT=27kΩ, RADJ=44kΩ, VFB=3.2V | 5 |+| Setting Voltage for CP Time | VCP | 1.9 | 2 | 2.1 | V | | 5 |+| Setting Current for CP Time | ICP | 0.85 | 1 | 1.15 | µA | | 5 |+| ADIM Pin Inflow Current 1 | IADIM1 | -5 | 0 | 5 | µA | VADIM=2.2V, VPWM2DC=12V | 5 |+| ADIM Pin Inflow Current 2 | IADIM2 | 19 | 28 | 37 | µA | VADIM=5V, VPWM2DC=12V | 5 |+| PWM2DC Pin Inflow Current | IPWM2DC | 4 | 6 | 8 | µA | VPWM2DC=3V | 5 |+| PWM2DC Pin High Voltage | VPWM2DCH | 1.8 | | 5 | V | | 5 |+| PWM2DC Pin Low Voltage | VPWM2DCL | -0.3 | | 0.8 | V | | 5 |+| PWM2DC Pin Selected Voltage to High Impedance | VPWM2DCZ | 7.5 | 8 | 8.5 | V | PWM2DC=sweep up | 5 |+| COMPSD Detection Voltage | VCOMPSD | 3.88 | 4 | 4.12 | V | | 5 |+| FAIL Pin ON-Resistance | RFAIL | | 100 | 200 | Ω | | 5 |++## CAD (KiCad official)++- Symbol: `BD94121F-GE2`+- Footprint: `Package_SO:SOP-18_7.495x11.515mm_P1.27mm`+- 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)+- 3D model files: `bd94121f-ge2-etched.step` / `bd94121f-ge2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bd94121f-ge2.step` / `bd94121f-ge2.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ROHM Semicon datasheet](docs/bd94121f-ge2-datasheet.pdf) (27 pp, sha256 `896dcc4202743ab5`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bd94121f-ge2-datasheet.pdf)
bd94121f-ge2-hero.glbadded⋯ 1 unchanged line ⋯
bd94121f-ge2-hero.overlay.jsonadded+480@@ -0,0 +1,480 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "BD94121F-GE2",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 18,+ "span_mm": 11.35,+ "dash_mm": 0.2838,+ "gap_mm": 0.1702,+ "pad_stroke_mm": 0.0681+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 18,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.908,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.255,+ 5.255,+ -5.26,+ 5.26+ ],+ "pads_bbox_mm": [+ -5.675,+ 5.675,+ -5.38,+ 5.38+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "bd94121f-ge2-etched.glb",+ "glb_sha256": "fedbf4342895b800ee443bb5f119b129c5c7da3ee2a4e41c4c4026991a35e016",+ "footprint": "bd94121f-ge2.kicad_mod",+ "footprint_sha256": "573f03ea668377fa10fcfaccd00e7de74d6a7d4c4d648043221db44ff395e49a",+ "pins": "page.json component.pins",+ "pins_sha256": "28ab6a5bdcdd1f5f868e8ba719b145a5b236cb522bd708cc83700e7c30be5cbd"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VCC",+ "x": -5.825,+ "y": -5.08,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "STB",+ "x": -5.825,+ "y": -3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -5.825,+ "y": -2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "RT",+ "x": -5.825,+ "y": -1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "FB",+ "x": -5.825,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "IS",+ "x": -5.825,+ "y": 1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "VS",+ "x": -5.825,+ "y": 2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "PWMCMP",+ "x": -5.825,+ "y": 3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "CP",+ "x": -5.825,+ "y": 5.08,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "PWMIN",+ "x": 5.825,+ "y": 5.08,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "ADIM",+ "x": 5.825,+ "y": 3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "SS",+ "x": 5.825,+ "y": 2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "FAIL",+ "x": 5.825,+ "y": 1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "COMPSD",+ "x": 5.825,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "PWM2DC",+ "x": 5.825,+ "y": -1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "PGND",+ "x": 5.825,+ "y": -2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "17",+ "text": "N2",+ "x": 5.825,+ "y": -3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "18",+ "text": "N1",+ "x": 5.825,+ "y": -5.08,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ -5.08+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ -3.81+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ -2.54+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ -1.27+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ 0.0+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ 1.27+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ 2.54+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ 3.81+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -4.725,+ 5.08+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ 5.08+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ 3.81+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ 2.54+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ 1.27+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ 0.0+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ -1.27+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ -2.54+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ -3.81+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 4.725,+ -5.08+ ],+ "size_mm": [+ 1.9,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
bd94121f-ge2.glbadded⋯ 1 unchanged line ⋯
bd94121f-ge2.kicad_modadded+360@@ -0,0 +1,360 @@+(footprint "SOP-18_7.495x11.515mm_P1.27mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523)")+ (tags "SOP SO")+ (property "Reference" "REF**"+ (at 0 -6.71 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SOP-18_7.495x11.515mm_P1.27mm"+ (at 0 6.71 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -3.8575 -5.8675)+ (end 3.8575 -5.8675)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.8575 -5.64)+ (end -3.8575 -5.8675)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.8575 5.8675)+ (end -3.8575 5.64)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.8575 -5.8675)+ (end 3.8575 -5.64)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.8575 5.64)+ (end 3.8575 5.8675)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.8575 5.8675)+ (end -3.8575 5.8675)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -4.73 -5.64)+ (xy -5.07 -6.11)+ (xy -4.39 -6.11)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -5.93 -5.63)+ (end -4 -5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -5.93 5.63)+ (end -5.93 -5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 -6.01)+ (end 4 -6.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 -5.63)+ (end -4 -6.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 5.63)+ (end -5.93 5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4 6.01)+ (end -4 5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 -6.01)+ (end 4 -5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 -5.63)+ (end 5.93 -5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 5.63)+ (end 4 6.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4 6.01)+ (end -4 6.01)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 5.93 -5.63)+ (end 5.93 5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 5.93 5.63)+ (end 4 5.63)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -2.7475 -5.7575)+ (xy 3.7475 -5.7575)+ (xy 3.7475 5.7575)+ (xy -3.7475 5.7575)+ (xy -3.7475 -4.7575)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -4.725 -5.08)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -4.725 -3.81)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -4.725 -2.54)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -4.725 -1.27)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -4.725 0)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -4.725 1.27)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -4.725 2.54)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -4.725 3.81)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -4.725 5.08)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at 4.725 5.08)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at 4.725 3.81)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at 4.725 2.54)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at 4.725 1.27)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at 4.725 0)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at 4.725 -1.27)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at 4.725 -2.54)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at 4.725 -3.81)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at 4.725 -5.08)+ (size 1.9 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOP-18_7.495x11.515mm_P1.27mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
bd94121f-ge2.kicad_symadded+85@@ -0,0 +1,85 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "BD94121F-GE2" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+ (property "Value" "BD94121F-GE2" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "BD94121F-GE2_0_1"+ (rectangle (start -12.70 12.70) (end 12.70 -12.70)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "BD94121F-GE2_1_1"+ (pin power_in line (at -17.78 10.16 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 7.62 0) (length 5.08)+ (name "STB" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 5.08 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 2.54 0) (length 5.08)+ (name "RT" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "FB" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -2.54 0) (length 5.08)+ (name "IS" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -5.08 0) (length 5.08)+ (name "VS" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -7.62 0) (length 5.08)+ (name "PWMCMP" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -10.16 0) (length 5.08)+ (name "CP" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 10.16 180) (length 5.08)+ (name "N1" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 7.62 180) (length 5.08)+ (name "N2" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 5.08 180) (length 5.08)+ (name "PGND" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "PWM2DC" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "COMPSD" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "FAIL" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -5.08 180) (length 5.08)+ (name "SS" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "ADIM" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -10.16 180) (length 5.08)+ (name "PWMIN" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
bd94121f-ge2.lbradded+160@@ -0,0 +1,160 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="SOP-18_7.495x11.515mm_P1.27mm">+ <description>SOP-18, 7.495 x 11.515 mm, 1.27 mm pitch</description>+ <smd name="1" x="-4.7250" y="5.0800" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="2" x="-4.7250" y="3.8100" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="3" x="-4.7250" y="2.5400" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="4" x="-4.7250" y="1.2700" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="5" x="-4.7250" y="-0.0000" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="6" x="-4.7250" y="-1.2700" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="7" x="-4.7250" y="-2.5400" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="8" x="-4.7250" y="-3.8100" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="9" x="-4.7250" y="-5.0800" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="10" x="4.7250" y="-5.0800" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="11" x="4.7250" y="-3.8100" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="12" x="4.7250" y="-2.5400" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="13" x="4.7250" y="-1.2700" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="14" x="4.7250" y="-0.0000" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="15" x="4.7250" y="1.2700" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="16" x="4.7250" y="2.5400" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="17" x="4.7250" y="3.8100" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="18" x="4.7250" y="5.0800" dx="1.9000" dy="0.6000" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-4.7300" y="5.6400"/>+ <vertex x="-5.0700" y="6.1100"/>+ <vertex x="-4.3900" y="6.1100"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-2.7475" y="5.7575"/>+ <vertex x="3.7475" y="5.7575"/>+ <vertex x="3.7475" y="-5.7575"/>+ <vertex x="-3.7475" y="-5.7575"/>+ <vertex x="-3.7475" y="4.7575"/>+ </polygon>+ <wire x1="-3.8575" y1="5.8675" x2="3.8575" y2="5.8675" width="0.1200" layer="21"/>+ <wire x1="-3.8575" y1="5.6400" x2="-3.8575" y2="5.8675" width="0.1200" layer="21"/>+ <wire x1="-3.8575" y1="-5.8675" x2="-3.8575" y2="-5.6400" width="0.1200" layer="21"/>+ <wire x1="3.8575" y1="5.8675" x2="3.8575" y2="5.6400" width="0.1200" layer="21"/>+ <wire x1="3.8575" y1="-5.6400" x2="3.8575" y2="-5.8675" width="0.1200" layer="21"/>+ <wire x1="3.8575" y1="-5.8675" x2="-3.8575" y2="-5.8675" width="0.1200" layer="21"/>+ <text x="0" y="6.630" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-6.630" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="BD94121F-GE2">+ <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="12.7" x2="12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+ <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="VCC" x="-17.78" y="10.16" length="middle" direction="pwr"/>+ <pin name="STB" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="GND" x="-17.78" y="5.08" length="middle" direction="pwr"/>+ <pin name="RT" x="-17.78" y="2.54" length="middle" direction="out"/>+ <pin name="FB" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="IS" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="VS" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+ <pin name="PWMCMP" x="-17.78" y="-7.62" length="middle" direction="in"/>+ <pin name="CP" x="-17.78" y="-10.16" length="middle" direction="out"/>+ <pin name="N1" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>+ <pin name="N2" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+ <pin name="PGND" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="PWM2DC" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="COMPSD" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="FAIL" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+ <pin name="SS" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+ <pin name="ADIM" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+ <pin name="PWMIN" x="17.78" y="-10.16" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="BD94121F-GE2" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="BD94121F-GE2" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="SOP-18_7.495x11.515mm_P1.27mm">+ <connects>+ <connect gate="G$1" pin="VCC" pad="1"/>+ <connect gate="G$1" pin="STB" pad="2"/>+ <connect gate="G$1" pin="GND" pad="3"/>+ <connect gate="G$1" pin="RT" pad="4"/>+ <connect gate="G$1" pin="FB" pad="5"/>+ <connect gate="G$1" pin="IS" pad="6"/>+ <connect gate="G$1" pin="VS" pad="7"/>+ <connect gate="G$1" pin="PWMCMP" pad="8"/>+ <connect gate="G$1" pin="CP" pad="9"/>+ <connect gate="G$1" pin="N1" pad="18"/>+ <connect gate="G$1" pin="N2" pad="17"/>+ <connect gate="G$1" pin="PGND" pad="16"/>+ <connect gate="G$1" pin="PWM2DC" pad="15"/>+ <connect gate="G$1" pin="COMPSD" pad="14"/>+ <connect gate="G$1" pin="FAIL" pad="13"/>+ <connect gate="G$1" pin="SS" pad="12"/>+ <connect gate="G$1" pin="ADIM" pad="11"/>+ <connect gate="G$1" pin="PWMIN" pad="10"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
bd94121f-ge2.stepadded+22636@@ -0,0 +1,27826 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-11-13T15:19:03',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.8','Open CASCADE 7.8'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('BD94121F-GE2','BD94121F-GE2','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#919,#2073,#3227,#4381,#5535,+ #6689,#7843,#8997,#10151,#11305,#12443,#13581,#14719,#15857,#16995,+ #18133,#19271,#20409,#21547),#21645);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#141,#232,#335,#413,#483,#546,#605,#652,#711,+ #773,#820,#846,#853,#860,#915));+#17 = ADVANCED_FACE('',(#18),#31,.T.);+#18 = FACE_BOUND('',#19,.T.);+#19 = EDGE_LOOP('',(#20,#54,#89,#116));+#20 = ORIENTED_EDGE('',*,*,#21,.T.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(3.55067444473,-5.56067444473,2.600486596563));+#26 = SURFACE_CURVE('',#27,(#30,#42),.PCURVE_S1.);+#27 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#28,#29),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#28 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#29 = CARTESIAN_POINT('',(3.543715789682,-5.553715789682,2.65));+#30 = PCURVE('',#31,#36);+#31 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#32,#33)+ ,(#34,#35+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.495),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#32 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#33 = CARTESIAN_POINT('',(-3.543715789682,-5.553715789682,2.65));+#34 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#35 = CARTESIAN_POINT('',(3.543715789682,-5.553715789682,2.65));+#36 = DEFINITIONAL_REPRESENTATION('',(#37),#41);+#37 = LINE('',#38,#39);+#38 = CARTESIAN_POINT('',(7.495,0.));+#39 = VECTOR('',#40,1.);+#40 = DIRECTION('',(0.,1.));+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#42 = PCURVE('',#43,#48);+#43 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#44,#45)+ ,(#46,#47+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,11.515),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#44 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#45 = CARTESIAN_POINT('',(3.543715789682,-5.553715789682,2.65));+#46 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#47 = CARTESIAN_POINT('',(3.543715789682,5.553715789682,2.65));+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#53);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(0.,0.));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(0.,1.));+#53 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#54 = ORIENTED_EDGE('',*,*,#55,.F.);+#55 = EDGE_CURVE('',#56,#24,#58,.T.);+#56 = VERTEX_POINT('',#57);+#57 = CARTESIAN_POINT('',(-3.55067444473,-5.56067444473,2.600486596563)+ );+#58 = SURFACE_CURVE('',#59,(#65,#71),.PCURVE_S1.);+#59 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#60,#61,#62,#63,#64),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#60 = CARTESIAN_POINT('',(-3.984425257387,-5.56067444473,2.600486596563)+ );+#61 = CARTESIAN_POINT('',(-3.767549851058,-5.56067444473,2.600486596563)+ );+#62 = CARTESIAN_POINT('',(0.,-5.56067444473,2.600486596563));+#63 = CARTESIAN_POINT('',(3.767549851058,-5.56067444473,2.600486596563)+ );+#64 = CARTESIAN_POINT('',(3.984425257387,-5.56067444473,2.600486596563)+ );+#65 = PCURVE('',#31,#66);+#66 = DEFINITIONAL_REPRESENTATION('',(#67),#70);+#67 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#68,#69),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(-6.958655047968E-03,7.094390234411),.PIECEWISE_BEZIER_KNOTS.);+#68 = CARTESIAN_POINT('',(0.,0.965852825216));+#69 = CARTESIAN_POINT('',(7.495,0.965852825216));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#83);+#72 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#73,#74,#75,#76,#77)+ ,(#78,#79,#80,#81,#82+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,7.101348889459),(+ -0.440709467705,-6.958655047968E-03,7.094390234411,7.528141047068),+ .UNSPECIFIED.);+#73 = CARTESIAN_POINT('',(-3.984425257387,-5.56067444473,2.600486596563)+ );+#74 = CARTESIAN_POINT('',(-3.767549851058,-5.56067444473,2.600486596563)+ );+#75 = CARTESIAN_POINT('',(0.,-5.56067444473,2.600486596563));+#76 = CARTESIAN_POINT('',(3.767549851058,-5.56067444473,2.600486596563)+ );+#77 = CARTESIAN_POINT('',(3.984425257387,-5.56067444473,2.600486596563)+ );+#78 = CARTESIAN_POINT('',(-3.984425257387,-5.503715789682,2.65));+#79 = CARTESIAN_POINT('',(-3.767549851058,-5.503715789682,2.65));+#80 = CARTESIAN_POINT('',(4.440892098501E-16,-5.503715789682,2.65));+#81 = CARTESIAN_POINT('',(3.767549851058,-5.503715789682,2.65));+#82 = CARTESIAN_POINT('',(3.984425257387,-5.503715789682,2.65));+#83 = DEFINITIONAL_REPRESENTATION('',(#84),#88);+#84 = LINE('',#85,#86);+#85 = CARTESIAN_POINT('',(0.,0.));+#86 = VECTOR('',#87,1.);+#87 = DIRECTION('',(0.,1.));+#88 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#89 = ORIENTED_EDGE('',*,*,#90,.F.);+#90 = EDGE_CURVE('',#91,#56,#93,.T.);+#91 = VERTEX_POINT('',#92);+#92 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#93 = SURFACE_CURVE('',#94,(#97,#104),.PCURVE_S1.);+#94 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#95,#96),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#95 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#96 = CARTESIAN_POINT('',(-3.543715789682,-5.553715789682,2.65));+#97 = PCURVE('',#31,#98);+#98 = DEFINITIONAL_REPRESENTATION('',(#99),#103);+#99 = LINE('',#100,#101);+#100 = CARTESIAN_POINT('',(0.,0.));+#101 = VECTOR('',#102,1.);+#102 = DIRECTION('',(0.,1.));+#103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#104 = PCURVE('',#105,#110);+#105 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#106,#107)+ ,(#108,#109+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,11.515),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#106 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#107 = CARTESIAN_POINT('',(-3.543715789682,5.553715789682,2.65));+#108 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#109 = CARTESIAN_POINT('',(-3.543715789682,-5.553715789682,2.65));+#110 = DEFINITIONAL_REPRESENTATION('',(#111),#115);+#111 = LINE('',#112,#113);+#112 = CARTESIAN_POINT('',(11.515,0.));+#113 = VECTOR('',#114,1.);+#114 = DIRECTION('',(0.,1.));+#115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#116 = ORIENTED_EDGE('',*,*,#117,.T.);+#117 = EDGE_CURVE('',#91,#22,#118,.T.);+#118 = SURFACE_CURVE('',#119,(#123,#129),.PCURVE_S1.);+#119 = LINE('',#120,#121);+#120 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#121 = VECTOR('',#122,1.);+#122 = DIRECTION('',(1.,0.,0.));+#123 = PCURVE('',#31,#124);+#124 = DEFINITIONAL_REPRESENTATION('',(#125),#128);+#125 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#126,#127),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.495),.PIECEWISE_BEZIER_KNOTS.);+#126 = CARTESIAN_POINT('',(0.,0.));+#127 = CARTESIAN_POINT('',(7.495,0.));+#128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#129 = PCURVE('',#130,#135);+#130 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#131,#132)+ ,(#133,#134+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.495),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#131 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#132 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#133 = CARTESIAN_POINT('',(3.599932123562,-5.609932123562,0.15));+#134 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#135 = DEFINITIONAL_REPRESENTATION('',(#136),#140);+#136 = LINE('',#137,#138);+#137 = CARTESIAN_POINT('',(0.,1.));+#138 = VECTOR('',#139,1.);+#139 = DIRECTION('',(1.,0.));+#140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#141 = ADVANCED_FACE('',(#142),#43,.T.);+#142 = FACE_BOUND('',#143,.T.);+#143 = EDGE_LOOP('',(#144,#173,#206,#207));+#144 = ORIENTED_EDGE('',*,*,#145,.T.);+#145 = EDGE_CURVE('',#146,#148,#150,.T.);+#146 = VERTEX_POINT('',#147);+#147 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#148 = VERTEX_POINT('',#149);+#149 = CARTESIAN_POINT('',(3.55067444473,5.56067444473,2.600486596563));+#150 = SURFACE_CURVE('',#151,(#154,#161),.PCURVE_S1.);+#151 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#152,#153),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#152 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#153 = CARTESIAN_POINT('',(3.543715789682,5.553715789682,2.65));+#154 = PCURVE('',#43,#155);+#155 = DEFINITIONAL_REPRESENTATION('',(#156),#160);+#156 = LINE('',#157,#158);+#157 = CARTESIAN_POINT('',(11.515,0.));+#158 = VECTOR('',#159,1.);+#159 = DIRECTION('',(0.,1.));+#160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#161 = PCURVE('',#162,#167);+#162 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#163,#164)+ ,(#165,#166+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.495),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#163 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#164 = CARTESIAN_POINT('',(3.543715789682,5.553715789682,2.65));+#165 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#166 = CARTESIAN_POINT('',(-3.543715789682,5.553715789682,2.65));+#167 = DEFINITIONAL_REPRESENTATION('',(#168),#172);+#168 = LINE('',#169,#170);+#169 = CARTESIAN_POINT('',(0.,0.));+#170 = VECTOR('',#171,1.);+#171 = DIRECTION('',(0.,1.));+#172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#173 = ORIENTED_EDGE('',*,*,#174,.F.);+#174 = EDGE_CURVE('',#24,#148,#175,.T.);+#175 = SURFACE_CURVE('',#176,(#182,#188),.PCURVE_S1.);+#176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#177,#178,#179,#180,#181),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048013E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#177 = CARTESIAN_POINT('',(3.55067444473,-6.240449257387,2.600486596563)+ );+#178 = CARTESIAN_POINT('',(3.55067444473,-5.900561851058,2.600486596563)+ );+#179 = CARTESIAN_POINT('',(3.55067444473,0.,2.600486596563));+#180 = CARTESIAN_POINT('',(3.55067444473,5.900561851058,2.600486596563)+ );+#181 = CARTESIAN_POINT('',(3.55067444473,6.240449257387,2.600486596563)+ );+#182 = PCURVE('',#43,#183);+#183 = DEFINITIONAL_REPRESENTATION('',(#184),#187);+#184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#185,#186),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655048013E-03,11.114390234411),.PIECEWISE_BEZIER_KNOTS.);+#185 = CARTESIAN_POINT('',(0.,0.965852825216));+#186 = CARTESIAN_POINT('',(11.515,0.965852825216));+#187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#188 = PCURVE('',#189,#200);+#189 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#190,#191,#192,#193,#194)+ ,(#195,#196,#197,#198,#199+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,11.121348889459),(+ -0.686733467705,-6.958655048013E-03,11.114390234411,11.794165047068)+ ,.UNSPECIFIED.);+#190 = CARTESIAN_POINT('',(3.55067444473,-6.240449257387,2.600486596563)+ );+#191 = CARTESIAN_POINT('',(3.55067444473,-5.900561851058,2.600486596563)+ );+#192 = CARTESIAN_POINT('',(3.55067444473,0.,2.600486596563));+#193 = CARTESIAN_POINT('',(3.55067444473,5.900561851058,2.600486596563)+ );+#194 = CARTESIAN_POINT('',(3.55067444473,6.240449257387,2.600486596563)+ );+#195 = CARTESIAN_POINT('',(3.493715789682,-6.240449257387,2.65));+#196 = CARTESIAN_POINT('',(3.493715789682,-5.900561851058,2.65));+#197 = CARTESIAN_POINT('',(3.493715789682,0.,2.65));+#198 = CARTESIAN_POINT('',(3.493715789682,5.900561851058,2.65));+#199 = CARTESIAN_POINT('',(3.493715789682,6.240449257387,2.65));+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = ORIENTED_EDGE('',*,*,#21,.F.);+#207 = ORIENTED_EDGE('',*,*,#208,.T.);+#208 = EDGE_CURVE('',#22,#146,#209,.T.);+#209 = SURFACE_CURVE('',#210,(#214,#220),.PCURVE_S1.);+#210 = LINE('',#211,#212);+#211 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#212 = VECTOR('',#213,1.);+#213 = DIRECTION('',(0.,1.,0.));+#214 = PCURVE('',#43,#215);+#215 = DEFINITIONAL_REPRESENTATION('',(#216),#219);+#216 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#217,#218),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,11.515),.PIECEWISE_BEZIER_KNOTS.);+#217 = CARTESIAN_POINT('',(0.,0.));+#218 = CARTESIAN_POINT('',(11.515,0.));+#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#220 = PCURVE('',#221,#226);+#221 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#222,#223)+ ,(#224,#225+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,11.515),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#222 = CARTESIAN_POINT('',(3.599932123562,-5.609932123562,0.15));+#223 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#224 = CARTESIAN_POINT('',(3.599932123562,5.609932123562,0.15));+#225 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#226 = DEFINITIONAL_REPRESENTATION('',(#227),#231);+#227 = LINE('',#228,#229);+#228 = CARTESIAN_POINT('',(0.,1.));+#229 = VECTOR('',#230,1.);+#230 = DIRECTION('',(1.,0.));+#231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#232 = ADVANCED_FACE('',(#233),#72,.F.);+#233 = FACE_BOUND('',#234,.F.);+#234 = EDGE_LOOP('',(#235,#275,#307,#334));+#235 = ORIENTED_EDGE('',*,*,#236,.T.);+#236 = EDGE_CURVE('',#56,#237,#239,.T.);+#237 = VERTEX_POINT('',#238);+#238 = CARTESIAN_POINT('',(-3.493715789682,-5.503715789682,2.65));+#239 = SURFACE_CURVE('',#240,(#246,#255),.PCURVE_S1.);+#240 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#241,#242,#243,#244,#245),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#241 = CARTESIAN_POINT('',(-3.55067444473,-5.56067444473,2.600486596563)+ );+#242 = CARTESIAN_POINT('',(-3.536434780968,-5.546434780968,+ 2.612864947422));+#243 = CARTESIAN_POINT('',(-3.522195117204,-5.532195117204,+ 2.625243298283));+#244 = CARTESIAN_POINT('',(-3.507955453443,-5.517955453443,+ 2.637621649141));+#245 = CARTESIAN_POINT('',(-3.493715789682,-5.503715789682,2.65));+#246 = PCURVE('',#72,#247);+#247 = DEFINITIONAL_REPRESENTATION('',(#248),#254);+#248 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#249,#250,#251,#252,#253),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#249 = CARTESIAN_POINT('',(0.,-6.958655047974E-03));+#250 = CARTESIAN_POINT('',(1.775337222314,7.281008713624E-03));+#251 = CARTESIAN_POINT('',(3.55067444493,2.152067247764E-02));+#252 = CARTESIAN_POINT('',(5.326011667145,3.576033623844E-02));+#253 = CARTESIAN_POINT('',(7.101348889459,5.000000000003E-02));+#254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#255 = PCURVE('',#256,#267);+#256 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#257,#258,#259,#260,#261)+ ,(#262,#263,#264,#265,#266+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,11.121348889459),(+ -0.686733467705,-6.958655048014E-03,11.114390234411,11.794165047068)+ ,.UNSPECIFIED.);+#257 = CARTESIAN_POINT('',(-3.493715789682,6.240449257387,2.65));+#258 = CARTESIAN_POINT('',(-3.493715789682,5.900561851058,2.65));+#259 = CARTESIAN_POINT('',(-3.493715789682,0.,2.65));+#260 = CARTESIAN_POINT('',(-3.493715789682,-5.900561851058,2.65));+#261 = CARTESIAN_POINT('',(-3.493715789682,-6.240449257387,2.65));+#262 = CARTESIAN_POINT('',(-3.55067444473,6.240449257387,2.600486596563)+ );+#263 = CARTESIAN_POINT('',(-3.55067444473,5.900561851058,2.600486596563)+ );+#264 = CARTESIAN_POINT('',(-3.55067444473,0.,2.600486596563));+#265 = CARTESIAN_POINT('',(-3.55067444473,-5.900561851058,2.600486596563+ ));+#266 = CARTESIAN_POINT('',(-3.55067444473,-6.240449257387,2.600486596563+ ));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#274);+#268 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#269,#270,#271,#272,#273),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#269 = CARTESIAN_POINT('',(11.121348889111,11.114390234409));+#270 = CARTESIAN_POINT('',(8.341011666825,11.100150570648));+#271 = CARTESIAN_POINT('',(5.560674444732,11.085910906887));+#272 = CARTESIAN_POINT('',(2.780337222382,11.071671243125));+#273 = CARTESIAN_POINT('',(9.544119236318E-11,11.057431579364));+#274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#275 = ORIENTED_EDGE('',*,*,#276,.T.);+#276 = EDGE_CURVE('',#237,#277,#279,.T.);+#277 = VERTEX_POINT('',#278);+#278 = CARTESIAN_POINT('',(3.493715789682,-5.503715789682,2.65));+#279 = SURFACE_CURVE('',#280,(#286,#293),.PCURVE_S1.);+#280 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#281,#282,#283,#284,#285),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#281 = CARTESIAN_POINT('',(-3.984425257387,-5.503715789682,2.65));+#282 = CARTESIAN_POINT('',(-3.767549851058,-5.503715789682,2.65));+#283 = CARTESIAN_POINT('',(4.440892098501E-16,-5.503715789682,2.65));+#284 = CARTESIAN_POINT('',(3.767549851058,-5.503715789682,2.65));+#285 = CARTESIAN_POINT('',(3.984425257387,-5.503715789682,2.65));+#286 = PCURVE('',#72,#287);+#287 = DEFINITIONAL_REPRESENTATION('',(#288),#292);+#288 = LINE('',#289,#290);+#289 = CARTESIAN_POINT('',(7.101348889459,0.));+#290 = VECTOR('',#291,1.);+#291 = DIRECTION('',(0.,1.));+#292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#293 = PCURVE('',#294,#299);+#294 = PLANE('',#295);+#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298);+#296 = CARTESIAN_POINT('',(-3.543715789682,-5.553715789682,2.65));+#297 = DIRECTION('',(0.,0.,-1.));+#298 = DIRECTION('',(0.537905035683,0.843005440425,0.));+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#306);+#300 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#301,#302,#303,#304,#305),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#301 = CARTESIAN_POINT('',(-0.194909569931,-0.398415730706));+#302 = CARTESIAN_POINT('',(-7.825119675031E-02,-0.215588583277));+#303 = CARTESIAN_POINT('',(1.948332840321,2.960476438239));+#304 = CARTESIAN_POINT('',(3.974916877393,6.136541459754));+#305 = CARTESIAN_POINT('',(4.091575250573,6.319368607184));+#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#307 = ORIENTED_EDGE('',*,*,#308,.F.);+#308 = EDGE_CURVE('',#24,#277,#309,.T.);+#309 = SURFACE_CURVE('',#310,(#316,#325),.PCURVE_S1.);+#310 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#311,#312,#313,#314,#315),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#311 = CARTESIAN_POINT('',(3.55067444473,-5.56067444473,2.600486596563)+ );+#312 = CARTESIAN_POINT('',(3.536434780968,-5.546434780968,2.612864947422+ ));+#313 = CARTESIAN_POINT('',(3.522195117208,-5.532195117208,2.625243298279+ ));+#314 = CARTESIAN_POINT('',(3.507955453443,-5.517955453443,2.637621649141+ ));+#315 = CARTESIAN_POINT('',(3.493715789682,-5.503715789682,2.65));+#316 = PCURVE('',#72,#317);+#317 = DEFINITIONAL_REPRESENTATION('',(#318),#324);+#318 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#319,#320,#321,#322,#323),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#319 = CARTESIAN_POINT('',(0.,7.094390234411));+#320 = CARTESIAN_POINT('',(1.775337222314,7.08015057065));+#321 = CARTESIAN_POINT('',(3.550674444422,7.06591090689));+#322 = CARTESIAN_POINT('',(5.326011667145,7.051671243125));+#323 = CARTESIAN_POINT('',(7.101348889459,7.037431579363));+#324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#325 = PCURVE('',#189,#326);+#326 = DEFINITIONAL_REPRESENTATION('',(#327),#333);+#327 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#328,#329,#330,#331,#332),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#328 = CARTESIAN_POINT('',(2.805783911911E-11,-6.958655047862E-03));+#329 = CARTESIAN_POINT('',(2.780337222314,7.281008713734E-03));+#330 = CARTESIAN_POINT('',(5.560674444732,2.1520672476E-02));+#331 = CARTESIAN_POINT('',(8.341011666758,3.576033623626E-02));+#332 = CARTESIAN_POINT('',(11.121348889044,4.999999999786E-02));+#333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#334 = ORIENTED_EDGE('',*,*,#55,.F.);+#335 = ADVANCED_FACE('',(#336),#130,.T.);+#336 = FACE_BOUND('',#337,.T.);+#337 = EDGE_LOOP('',(#338,#367,#387,#388));+#338 = ORIENTED_EDGE('',*,*,#339,.T.);+#339 = EDGE_CURVE('',#340,#342,#344,.T.);+#340 = VERTEX_POINT('',#341);+#341 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#342 = VERTEX_POINT('',#343);+#343 = CARTESIAN_POINT('',(3.599932123562,-5.609932123562,0.15));+#344 = SURFACE_CURVE('',#345,(#349,#355),.PCURVE_S1.);+#345 = LINE('',#346,#347);+#346 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#347 = VECTOR('',#348,1.);+#348 = DIRECTION('',(1.,0.,0.));+#349 = PCURVE('',#130,#350);+#350 = DEFINITIONAL_REPRESENTATION('',(#351),#354);+#351 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#352,#353),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.199864247125),.PIECEWISE_BEZIER_KNOTS.);+#352 = CARTESIAN_POINT('',(0.,0.));+#353 = CARTESIAN_POINT('',(7.495,0.));+#354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#355 = PCURVE('',#356,#361);+#356 = PLANE('',#357);+#357 = AXIS2_PLACEMENT_3D('',#358,#359,#360);+#358 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#359 = DIRECTION('',(0.,0.,-1.));+#360 = DIRECTION('',(0.540072423847,0.841618546017,0.));+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,0.));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(0.540072423847,0.841618546017));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = ORIENTED_EDGE('',*,*,#368,.T.);+#368 = EDGE_CURVE('',#342,#22,#369,.T.);+#369 = SURFACE_CURVE('',#370,(#373,#380),.PCURVE_S1.);+#370 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#371,#372),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#371 = CARTESIAN_POINT('',(3.599932123562,-5.609932123562,0.15));+#372 = CARTESIAN_POINT('',(3.7475,-5.7575,1.2));+#373 = PCURVE('',#130,#374);+#374 = DEFINITIONAL_REPRESENTATION('',(#375),#379);+#375 = LINE('',#376,#377);+#376 = CARTESIAN_POINT('',(7.495,0.));+#377 = VECTOR('',#378,1.);+#378 = DIRECTION('',(0.,1.));+#379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#380 = PCURVE('',#221,#381);+#381 = DEFINITIONAL_REPRESENTATION('',(#382),#386);+#382 = LINE('',#383,#384);+#383 = CARTESIAN_POINT('',(0.,0.));+#384 = VECTOR('',#385,1.);+#385 = DIRECTION('',(0.,1.));+#386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#387 = ORIENTED_EDGE('',*,*,#117,.F.);+#388 = ORIENTED_EDGE('',*,*,#389,.F.);+#389 = EDGE_CURVE('',#340,#91,#390,.T.);+#390 = SURFACE_CURVE('',#391,(#394,#401),.PCURVE_S1.);+#391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#392,#393),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#392 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#393 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#394 = PCURVE('',#130,#395);+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,0.));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(0.,1.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = PCURVE('',#402,#407);+#402 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#403,#404)+ ,(#405,#406+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,11.515),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#403 = CARTESIAN_POINT('',(-3.599932123562,5.609932123562,0.15));+#404 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#405 = CARTESIAN_POINT('',(-3.599932123562,-5.609932123562,0.15));+#406 = CARTESIAN_POINT('',(-3.7475,-5.7575,1.2));+#407 = DEFINITIONAL_REPRESENTATION('',(#408),#412);+#408 = LINE('',#409,#410);+#409 = CARTESIAN_POINT('',(11.515,0.));+#410 = VECTOR('',#411,1.);+#411 = DIRECTION('',(0.,1.));+#412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#413 = ADVANCED_FACE('',(#414),#105,.T.);+#414 = FACE_BOUND('',#415,.T.);+#415 = EDGE_LOOP('',(#416,#417,#441,#463));+#416 = ORIENTED_EDGE('',*,*,#90,.T.);+#417 = ORIENTED_EDGE('',*,*,#418,.F.);+#418 = EDGE_CURVE('',#419,#56,#421,.T.);+#419 = VERTEX_POINT('',#420);+#420 = CARTESIAN_POINT('',(-3.55067444473,5.56067444473,2.600486596563)+ );+#421 = SURFACE_CURVE('',#422,(#428,#434),.PCURVE_S1.);+#422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#423,#424,#425,#426,#427),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048014E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#423 = CARTESIAN_POINT('',(-3.55067444473,6.240449257387,2.600486596563)+ );+#424 = CARTESIAN_POINT('',(-3.55067444473,5.900561851058,2.600486596563)+ );+#425 = CARTESIAN_POINT('',(-3.55067444473,0.,2.600486596563));+#426 = CARTESIAN_POINT('',(-3.55067444473,-5.900561851058,2.600486596563+ ));+#427 = CARTESIAN_POINT('',(-3.55067444473,-6.240449257387,2.600486596563+ ));+#428 = PCURVE('',#105,#429);+#429 = DEFINITIONAL_REPRESENTATION('',(#430),#433);+#430 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#431,#432),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655048014E-03,11.114390234411),.PIECEWISE_BEZIER_KNOTS.);+#431 = CARTESIAN_POINT('',(0.,0.965852825216));+#432 = CARTESIAN_POINT('',(11.515,0.965852825216));+#433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#434 = PCURVE('',#256,#435);+#435 = DEFINITIONAL_REPRESENTATION('',(#436),#440);+#436 = LINE('',#437,#438);+#437 = CARTESIAN_POINT('',(11.121348889459,0.));+#438 = VECTOR('',#439,1.);+#439 = DIRECTION('',(0.,1.));+#440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#441 = ORIENTED_EDGE('',*,*,#442,.F.);+#442 = EDGE_CURVE('',#443,#419,#445,.T.);+#443 = VERTEX_POINT('',#444);+#444 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#445 = SURFACE_CURVE('',#446,(#449,#456),.PCURVE_S1.);+#446 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#447,#448),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#447 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#448 = CARTESIAN_POINT('',(-3.543715789682,5.553715789682,2.65));+#449 = PCURVE('',#105,#450);+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);+#451 = LINE('',#452,#453);+#452 = CARTESIAN_POINT('',(0.,0.));+#453 = VECTOR('',#454,1.);+#454 = DIRECTION('',(0.,1.));+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#456 = PCURVE('',#162,#457);+#457 = DEFINITIONAL_REPRESENTATION('',(#458),#462);+#458 = LINE('',#459,#460);+#459 = CARTESIAN_POINT('',(7.495,0.));+#460 = VECTOR('',#461,1.);+#461 = DIRECTION('',(0.,1.));+#462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#463 = ORIENTED_EDGE('',*,*,#464,.T.);+#464 = EDGE_CURVE('',#443,#91,#465,.T.);+#465 = SURFACE_CURVE('',#466,(#470,#476),.PCURVE_S1.);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(0.,-1.,0.));+#470 = PCURVE('',#105,#471);+#471 = DEFINITIONAL_REPRESENTATION('',(#472),#475);+#472 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#473,#474),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,11.515),.PIECEWISE_BEZIER_KNOTS.);+#473 = CARTESIAN_POINT('',(0.,0.));+#474 = CARTESIAN_POINT('',(11.515,0.));+#475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#476 = PCURVE('',#402,#477);+#477 = DEFINITIONAL_REPRESENTATION('',(#478),#482);+#478 = LINE('',#479,#480);+#479 = CARTESIAN_POINT('',(0.,1.));+#480 = VECTOR('',#481,1.);+#481 = DIRECTION('',(1.,0.));+#482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#483 = ADVANCED_FACE('',(#484),#162,.T.);+#484 = FACE_BOUND('',#485,.T.);+#485 = EDGE_LOOP('',(#486,#487,#520,#521));+#486 = ORIENTED_EDGE('',*,*,#442,.T.);+#487 = ORIENTED_EDGE('',*,*,#488,.F.);+#488 = EDGE_CURVE('',#148,#419,#489,.T.);+#489 = SURFACE_CURVE('',#490,(#496,#502),.PCURVE_S1.);+#490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#491,#492,#493,#494,#495),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#491 = CARTESIAN_POINT('',(3.984425257387,5.56067444473,2.600486596563)+ );+#492 = CARTESIAN_POINT('',(3.767549851058,5.56067444473,2.600486596563)+ );+#493 = CARTESIAN_POINT('',(0.,5.56067444473,2.600486596563));+#494 = CARTESIAN_POINT('',(-3.767549851058,5.56067444473,2.600486596563)+ );+#495 = CARTESIAN_POINT('',(-3.984425257387,5.56067444473,2.600486596563)+ );+#496 = PCURVE('',#162,#497);+#497 = DEFINITIONAL_REPRESENTATION('',(#498),#501);+#498 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#499,#500),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655047968E-03,7.094390234411),.PIECEWISE_BEZIER_KNOTS.);+#499 = CARTESIAN_POINT('',(0.,0.965852825216));+#500 = CARTESIAN_POINT('',(7.495,0.965852825216));+#501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#502 = PCURVE('',#503,#514);+#503 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#504,#505,#506,#507,#508)+ ,(#509,#510,#511,#512,#513+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,7.101348889459),(+ -0.440709467705,-6.958655047968E-03,7.094390234411,7.528141047068),+ .UNSPECIFIED.);+#504 = CARTESIAN_POINT('',(3.984425257387,5.503715789682,2.65));+#505 = CARTESIAN_POINT('',(3.767549851058,5.503715789682,2.65));+#506 = CARTESIAN_POINT('',(-8.881784197001E-16,5.503715789682,2.65));+#507 = CARTESIAN_POINT('',(-3.767549851058,5.503715789682,2.65));+#508 = CARTESIAN_POINT('',(-3.984425257387,5.503715789682,2.65));+#509 = CARTESIAN_POINT('',(3.984425257387,5.56067444473,2.600486596563)+ );+#510 = CARTESIAN_POINT('',(3.767549851058,5.56067444473,2.600486596563)+ );+#511 = CARTESIAN_POINT('',(0.,5.56067444473,2.600486596563));+#512 = CARTESIAN_POINT('',(-3.767549851058,5.56067444473,2.600486596563)+ );+#513 = CARTESIAN_POINT('',(-3.984425257387,5.56067444473,2.600486596563)+ );+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(7.101348889459,0.));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(0.,1.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = ORIENTED_EDGE('',*,*,#145,.F.);+#521 = ORIENTED_EDGE('',*,*,#522,.T.);+#522 = EDGE_CURVE('',#146,#443,#523,.T.);+#523 = SURFACE_CURVE('',#524,(#528,#534),.PCURVE_S1.);+#524 = LINE('',#525,#526);+#525 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#526 = VECTOR('',#527,1.);+#527 = DIRECTION('',(-1.,0.,0.));+#528 = PCURVE('',#162,#529);+#529 = DEFINITIONAL_REPRESENTATION('',(#530),#533);+#530 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#531,#532),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.495),.PIECEWISE_BEZIER_KNOTS.);+#531 = CARTESIAN_POINT('',(0.,0.));+#532 = CARTESIAN_POINT('',(7.495,0.));+#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#534 = PCURVE('',#535,#540);+#535 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#536,#537)+ ,(#538,#539+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.495),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#536 = CARTESIAN_POINT('',(3.599932123562,5.609932123562,0.15));+#537 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#538 = CARTESIAN_POINT('',(-3.599932123562,5.609932123562,0.15));+#539 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#545);+#541 = LINE('',#542,#543);+#542 = CARTESIAN_POINT('',(0.,1.));+#543 = VECTOR('',#544,1.);+#544 = DIRECTION('',(1.,0.));+#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#546 = ADVANCED_FACE('',(#547),#189,.F.);+#547 = FACE_BOUND('',#548,.F.);+#548 = EDGE_LOOP('',(#549,#550,#577,#604));+#549 = ORIENTED_EDGE('',*,*,#308,.T.);+#550 = ORIENTED_EDGE('',*,*,#551,.T.);+#551 = EDGE_CURVE('',#277,#552,#554,.T.);+#552 = VERTEX_POINT('',#553);+#553 = CARTESIAN_POINT('',(3.493715789682,5.503715789682,2.65));+#554 = SURFACE_CURVE('',#555,(#561,#568),.PCURVE_S1.);+#555 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#556,#557,#558,#559,#560),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048013E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#556 = CARTESIAN_POINT('',(3.493715789682,-6.240449257387,2.65));+#557 = CARTESIAN_POINT('',(3.493715789682,-5.900561851058,2.65));+#558 = CARTESIAN_POINT('',(3.493715789682,0.,2.65));+#559 = CARTESIAN_POINT('',(3.493715789682,5.900561851058,2.65));+#560 = CARTESIAN_POINT('',(3.493715789682,6.240449257387,2.65));+#561 = PCURVE('',#189,#562);+#562 = DEFINITIONAL_REPRESENTATION('',(#563),#567);+#563 = LINE('',#564,#565);+#564 = CARTESIAN_POINT('',(11.121348889459,0.));+#565 = VECTOR('',#566,1.);+#566 = DIRECTION('',(0.,1.));+#567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#568 = PCURVE('',#294,#569);+#569 = DEFINITIONAL_REPRESENTATION('',(#570),#576);+#570 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#571,#572,#573,#574,#575),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048013E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#571 = CARTESIAN_POINT('',(3.206549835418,6.301990498475));+#572 = CARTESIAN_POINT('',(3.493076768086,6.119163351046));+#573 = CARTESIAN_POINT('',(8.467282510094,2.945221418001));+#574 = CARTESIAN_POINT('',(13.441488252102,-0.228720515043));+#575 = CARTESIAN_POINT('',(13.728015184769,-0.411547662472));+#576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#577 = ORIENTED_EDGE('',*,*,#578,.F.);+#578 = EDGE_CURVE('',#148,#552,#579,.T.);+#579 = SURFACE_CURVE('',#580,(#586,#595),.PCURVE_S1.);+#580 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#581,#582,#583,#584,#585),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#581 = CARTESIAN_POINT('',(3.55067444473,5.56067444473,2.600486596563));+#582 = CARTESIAN_POINT('',(3.536434780968,5.546434780968,2.612864947422)+ );+#583 = CARTESIAN_POINT('',(3.522195117206,5.532195117206,2.625243298281)+ );+#584 = CARTESIAN_POINT('',(3.507955453443,5.517955453443,2.637621649141)+ );+#585 = CARTESIAN_POINT('',(3.493715789682,5.503715789682,2.65));+#586 = PCURVE('',#189,#587);+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#594);+#588 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#589,#590,#591,#592,#593),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#589 = CARTESIAN_POINT('',(0.,11.114390234411));+#590 = CARTESIAN_POINT('',(2.780337222333,11.100150570649));+#591 = CARTESIAN_POINT('',(5.56067444456,11.085910906888));+#592 = CARTESIAN_POINT('',(8.341011667127,11.071671243125));+#593 = CARTESIAN_POINT('',(11.121348889459,11.057431579363));+#594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#595 = PCURVE('',#503,#596);+#596 = DEFINITIONAL_REPRESENTATION('',(#597),#603);+#597 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#598,#599,#600,#601,#602),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#598 = CARTESIAN_POINT('',(7.101348889423,-6.958655047684E-03));+#599 = CARTESIAN_POINT('',(5.326011667079,7.281008714152E-03));+#600 = CARTESIAN_POINT('',(3.55067444457,2.152067247731E-02));+#601 = CARTESIAN_POINT('',(1.775337222593,3.57603362362E-02));+#602 = CARTESIAN_POINT('',(2.488152865956E-10,4.999999999804E-02));+#603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#604 = ORIENTED_EDGE('',*,*,#174,.F.);+#605 = ADVANCED_FACE('',(#606),#221,.T.);+#606 = FACE_BOUND('',#607,.T.);+#607 = EDGE_LOOP('',(#608,#630,#650,#651));+#608 = ORIENTED_EDGE('',*,*,#609,.T.);+#609 = EDGE_CURVE('',#342,#610,#612,.T.);+#610 = VERTEX_POINT('',#611);+#611 = CARTESIAN_POINT('',(3.599932123562,5.609932123562,0.15));+#612 = SURFACE_CURVE('',#613,(#617,#623),.PCURVE_S1.);+#613 = LINE('',#614,#615);+#614 = CARTESIAN_POINT('',(3.599932123562,-5.609932123562,0.15));+#615 = VECTOR('',#616,1.);+#616 = DIRECTION('',(0.,1.,0.));+#617 = PCURVE('',#221,#618);+#618 = DEFINITIONAL_REPRESENTATION('',(#619),#622);+#619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#620,#621),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,11.219864247125),.PIECEWISE_BEZIER_KNOTS.);+#620 = CARTESIAN_POINT('',(0.,0.));+#621 = CARTESIAN_POINT('',(11.515,0.));+#622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#623 = PCURVE('',#356,#624);+#624 = DEFINITIONAL_REPRESENTATION('',(#625),#629);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(3.888448135314,6.059539279185));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(0.841618546017,-0.540072423847));+#629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#630 = ORIENTED_EDGE('',*,*,#631,.T.);+#631 = EDGE_CURVE('',#610,#146,#632,.T.);+#632 = SURFACE_CURVE('',#633,(#636,#643),.PCURVE_S1.);+#633 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#634,#635),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#634 = CARTESIAN_POINT('',(3.599932123562,5.609932123562,0.15));+#635 = CARTESIAN_POINT('',(3.7475,5.7575,1.2));+#636 = PCURVE('',#221,#637);+#637 = DEFINITIONAL_REPRESENTATION('',(#638),#642);+#638 = LINE('',#639,#640);+#639 = CARTESIAN_POINT('',(11.515,0.));+#640 = VECTOR('',#641,1.);+#641 = DIRECTION('',(0.,1.));+#642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#643 = PCURVE('',#535,#644);+#644 = DEFINITIONAL_REPRESENTATION('',(#645),#649);+#645 = LINE('',#646,#647);+#646 = CARTESIAN_POINT('',(0.,0.));+#647 = VECTOR('',#648,1.);+#648 = DIRECTION('',(0.,1.));+#649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#650 = ORIENTED_EDGE('',*,*,#208,.F.);+#651 = ORIENTED_EDGE('',*,*,#368,.F.);+#652 = ADVANCED_FACE('',(#653),#256,.T.);+#653 = FACE_BOUND('',#654,.T.);+#654 = EDGE_LOOP('',(#655,#684,#685,#686));+#655 = ORIENTED_EDGE('',*,*,#656,.T.);+#656 = EDGE_CURVE('',#657,#419,#659,.T.);+#657 = VERTEX_POINT('',#658);+#658 = CARTESIAN_POINT('',(-3.493715789682,5.503715789682,2.65));+#659 = SURFACE_CURVE('',#660,(#666,#675),.PCURVE_S1.);+#660 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#661,#662,#663,#664,#665),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#661 = CARTESIAN_POINT('',(-3.493715789682,5.503715789682,2.65));+#662 = CARTESIAN_POINT('',(-3.507955453443,5.517955453443,2.637621649141+ ));+#663 = CARTESIAN_POINT('',(-3.522195117208,5.532195117208,2.62524329828)+ );+#664 = CARTESIAN_POINT('',(-3.536434780968,5.546434780968,2.612864947422+ ));+#665 = CARTESIAN_POINT('',(-3.55067444473,5.56067444473,2.600486596563)+ );+#666 = PCURVE('',#256,#667);+#667 = DEFINITIONAL_REPRESENTATION('',(#668),#674);+#668 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#669,#670,#671,#672,#673),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#669 = CARTESIAN_POINT('',(3.896675789989E-10,4.999999999799E-02));+#670 = CARTESIAN_POINT('',(2.780337222676,3.57603362364E-02));+#671 = CARTESIAN_POINT('',(5.560674444729,2.152067247599E-02));+#672 = CARTESIAN_POINT('',(8.341011667119,7.281008713865E-03));+#673 = CARTESIAN_POINT('',(11.121348889405,-6.958655047731E-03));+#674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#675 = PCURVE('',#503,#676);+#676 = DEFINITIONAL_REPRESENTATION('',(#677),#683);+#677 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#678,#679,#680,#681,#682),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#678 = CARTESIAN_POINT('',(0.,7.037431579363));+#679 = CARTESIAN_POINT('',(1.775337222314,7.051671243125));+#680 = CARTESIAN_POINT('',(3.550674444994,7.065910906889));+#681 = CARTESIAN_POINT('',(5.326011667145,7.08015057065));+#682 = CARTESIAN_POINT('',(7.101348889459,7.094390234411));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = ORIENTED_EDGE('',*,*,#418,.T.);+#685 = ORIENTED_EDGE('',*,*,#236,.T.);+#686 = ORIENTED_EDGE('',*,*,#687,.F.);+#687 = EDGE_CURVE('',#657,#237,#688,.T.);+#688 = SURFACE_CURVE('',#689,(#695,#702),.PCURVE_S1.);+#689 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#690,#691,#692,#693,#694),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048014E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#690 = CARTESIAN_POINT('',(-3.493715789682,6.240449257387,2.65));+#691 = CARTESIAN_POINT('',(-3.493715789682,5.900561851058,2.65));+#692 = CARTESIAN_POINT('',(-3.493715789682,0.,2.65));+#693 = CARTESIAN_POINT('',(-3.493715789682,-5.900561851058,2.65));+#694 = CARTESIAN_POINT('',(-3.493715789682,-6.240449257387,2.65));+#695 = PCURVE('',#256,#696);+#696 = DEFINITIONAL_REPRESENTATION('',(#697),#701);+#697 = LINE('',#698,#699);+#698 = CARTESIAN_POINT('',(0.,0.));+#699 = VECTOR('',#700,1.);+#700 = DIRECTION('',(0.,1.));+#701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#702 = PCURVE('',#294,#703);+#703 = DEFINITIONAL_REPRESENTATION('',(#704),#710);+#704 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#705,#706,#707,#708,#709),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.686733467705,-6.958655048014E-03,+ 11.114390234411,11.794165047068),.UNSPECIFIED.);+#705 = CARTESIAN_POINT('',(9.969440551737,-6.301990498476));+#706 = CARTESIAN_POINT('',(9.68291361907,-6.119163351046));+#707 = CARTESIAN_POINT('',(4.708707877062,-2.945221418002));+#708 = CARTESIAN_POINT('',(-0.265497864946,0.228720515042));+#709 = CARTESIAN_POINT('',(-0.552024797613,0.411547662472));+#710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#711 = ADVANCED_FACE('',(#712,#742),#294,.F.);+#712 = FACE_BOUND('',#713,.F.);+#713 = EDGE_LOOP('',(#714,#715,#716,#741));+#714 = ORIENTED_EDGE('',*,*,#276,.F.);+#715 = ORIENTED_EDGE('',*,*,#687,.F.);+#716 = ORIENTED_EDGE('',*,*,#717,.F.);+#717 = EDGE_CURVE('',#552,#657,#718,.T.);+#718 = SURFACE_CURVE('',#719,(#725,#734),.PCURVE_S1.);+#719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#720,#721,#722,#723,#724),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#720 = CARTESIAN_POINT('',(3.984425257387,5.503715789682,2.65));+#721 = CARTESIAN_POINT('',(3.767549851058,5.503715789682,2.65));+#722 = CARTESIAN_POINT('',(-8.881784197001E-16,5.503715789682,2.65));+#723 = CARTESIAN_POINT('',(-3.767549851058,5.503715789682,2.65));+#724 = CARTESIAN_POINT('',(-3.984425257387,5.503715789682,2.65));+#725 = PCURVE('',#294,#726);+#726 = DEFINITIONAL_REPRESENTATION('',(#727),#733);+#727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#728,#729,#730,#731,#732),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.440709467705,-6.958655047968E-03,+ 7.094390234411,7.528141047068),.UNSPECIFIED.);+#728 = CARTESIAN_POINT('',(13.370899957086,0.398415730706));+#729 = CARTESIAN_POINT('',(13.254241583906,0.215588583276));+#730 = CARTESIAN_POINT('',(11.227657546834,-2.960476438239));+#731 = CARTESIAN_POINT('',(9.201073509763,-6.136541459755));+#732 = CARTESIAN_POINT('',(9.084415136583,-6.319368607185));+#733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#734 = PCURVE('',#503,#735);+#735 = DEFINITIONAL_REPRESENTATION('',(#736),#740);+#736 = LINE('',#737,#738);+#737 = CARTESIAN_POINT('',(0.,0.));+#738 = VECTOR('',#739,1.);+#739 = DIRECTION('',(0.,1.));+#740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#741 = ORIENTED_EDGE('',*,*,#551,.F.);+#742 = FACE_BOUND('',#743,.F.);+#743 = EDGE_LOOP('',(#744));+#744 = ORIENTED_EDGE('',*,*,#745,.F.);+#745 = EDGE_CURVE('',#746,#746,#748,.T.);+#746 = VERTEX_POINT('',#747);+#747 = CARTESIAN_POINT('',(-2.344515789682,4.729265789682,2.65));+#748 = SURFACE_CURVE('',#749,(#754,#761),.PCURVE_S1.);+#749 = CIRCLE('',#750,0.37475);+#750 = AXIS2_PLACEMENT_3D('',#751,#752,#753);+#751 = CARTESIAN_POINT('',(-2.719265789682,4.729265789682,2.65));+#752 = DIRECTION('',(0.,0.,-1.));+#753 = DIRECTION('',(1.,0.,0.));+#754 = PCURVE('',#294,#755);+#755 = DEFINITIONAL_REPRESENTATION('',(#756),#760);+#756 = CIRCLE('',#757,0.37475);+#757 = AXIS2_PLACEMENT_2D('',#758,#759);+#758 = CARTESIAN_POINT('',(9.112085221866,-4.836251738019));+#759 = DIRECTION('',(0.537905035683,0.843005440425));+#760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#761 = PCURVE('',#762,#767);+#762 = CYLINDRICAL_SURFACE('',#763,0.37475);+#763 = AXIS2_PLACEMENT_3D('',#764,#765,#766);+#764 = CARTESIAN_POINT('',(-2.719265789682,4.729265789682,2.6));+#765 = DIRECTION('',(-0.,-0.,-1.));+#766 = DIRECTION('',(1.,0.,0.));+#767 = DEFINITIONAL_REPRESENTATION('',(#768),#772);+#768 = LINE('',#769,#770);+#769 = CARTESIAN_POINT('',(-4.138911435803E-13,-5.E-02));+#770 = VECTOR('',#771,1.);+#771 = DIRECTION('',(1.,-0.));+#772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#773 = ADVANCED_FACE('',(#774),#356,.T.);+#774 = FACE_BOUND('',#775,.F.);+#775 = EDGE_LOOP('',(#776,#777,#778,#800));+#776 = ORIENTED_EDGE('',*,*,#339,.T.);+#777 = ORIENTED_EDGE('',*,*,#609,.T.);+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#610,#780,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(-3.599932123562,5.609932123562,0.15));+#782 = SURFACE_CURVE('',#783,(#787,#794),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(3.599932123562,5.609932123562,0.15));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(-1.,0.,0.));+#787 = PCURVE('',#356,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#793);+#789 = LINE('',#790,#791);+#790 = CARTESIAN_POINT('',(13.331293969488,5.728750807066E-12));+#791 = VECTOR('',#792,1.);+#792 = DIRECTION('',(-0.540072423847,-0.841618546017));+#793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#794 = PCURVE('',#535,#795);+#795 = DEFINITIONAL_REPRESENTATION('',(#796),#799);+#796 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#797,#798),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.199864247125),.PIECEWISE_BEZIER_KNOTS.);+#797 = CARTESIAN_POINT('',(0.,0.));+#798 = CARTESIAN_POINT('',(7.495,0.));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#801,.T.);+#801 = EDGE_CURVE('',#780,#340,#802,.T.);+#802 = SURFACE_CURVE('',#803,(#807,#814),.PCURVE_S1.);+#803 = LINE('',#804,#805);+#804 = CARTESIAN_POINT('',(-3.599932123562,5.609932123562,0.15));+#805 = VECTOR('',#806,1.);+#806 = DIRECTION('',(0.,-1.,0.));+#807 = PCURVE('',#356,#808);+#808 = DEFINITIONAL_REPRESENTATION('',(#809),#813);+#809 = LINE('',#810,#811);+#810 = CARTESIAN_POINT('',(9.442845834174,-6.059539279179));+#811 = VECTOR('',#812,1.);+#812 = DIRECTION('',(-0.841618546017,0.540072423847));+#813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#814 = PCURVE('',#402,#815);+#815 = DEFINITIONAL_REPRESENTATION('',(#816),#819);+#816 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#817,#818),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,11.219864247125),.PIECEWISE_BEZIER_KNOTS.);+#817 = CARTESIAN_POINT('',(0.,0.));+#818 = CARTESIAN_POINT('',(11.515,0.));+#819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#820 = ADVANCED_FACE('',(#821),#402,.T.);+#821 = FACE_BOUND('',#822,.T.);+#822 = EDGE_LOOP('',(#823,#824,#825,#826));+#823 = ORIENTED_EDGE('',*,*,#801,.T.);+#824 = ORIENTED_EDGE('',*,*,#389,.T.);+#825 = ORIENTED_EDGE('',*,*,#464,.F.);+#826 = ORIENTED_EDGE('',*,*,#827,.F.);+#827 = EDGE_CURVE('',#780,#443,#828,.T.);+#828 = SURFACE_CURVE('',#829,(#832,#839),.PCURVE_S1.);+#829 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#830,#831),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#830 = CARTESIAN_POINT('',(-3.599932123562,5.609932123562,0.15));+#831 = CARTESIAN_POINT('',(-3.7475,5.7575,1.2));+#832 = PCURVE('',#402,#833);+#833 = DEFINITIONAL_REPRESENTATION('',(#834),#838);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(0.,0.));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(0.,1.));+#838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#839 = PCURVE('',#535,#840);+#840 = DEFINITIONAL_REPRESENTATION('',(#841),#845);+#841 = LINE('',#842,#843);+#842 = CARTESIAN_POINT('',(7.495,0.));+#843 = VECTOR('',#844,1.);+#844 = DIRECTION('',(0.,1.));+#845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#846 = ADVANCED_FACE('',(#847),#503,.T.);+#847 = FACE_BOUND('',#848,.T.);+#848 = EDGE_LOOP('',(#849,#850,#851,#852));+#849 = ORIENTED_EDGE('',*,*,#578,.F.);+#850 = ORIENTED_EDGE('',*,*,#488,.T.);+#851 = ORIENTED_EDGE('',*,*,#656,.F.);+#852 = ORIENTED_EDGE('',*,*,#717,.F.);+#853 = ADVANCED_FACE('',(#854),#535,.T.);+#854 = FACE_BOUND('',#855,.T.);+#855 = EDGE_LOOP('',(#856,#857,#858,#859));+#856 = ORIENTED_EDGE('',*,*,#779,.T.);+#857 = ORIENTED_EDGE('',*,*,#827,.T.);+#858 = ORIENTED_EDGE('',*,*,#522,.F.);+#859 = ORIENTED_EDGE('',*,*,#631,.F.);+#860 = ADVANCED_FACE('',(#861),#762,.F.);+#861 = FACE_BOUND('',#862,.F.);+#862 = EDGE_LOOP('',(#863,#886,#887,#888));+#863 = ORIENTED_EDGE('',*,*,#864,.T.);+#864 = EDGE_CURVE('',#865,#746,#867,.T.);+#865 = VERTEX_POINT('',#866);+#866 = CARTESIAN_POINT('',(-2.344515789682,4.729265789682,2.6));+#867 = SEAM_CURVE('',#868,(#872,#879),.PCURVE_S1.);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(-2.344515789682,4.729265789682,2.6));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(0.,0.,1.));+#872 = PCURVE('',#762,#873);+#873 = DEFINITIONAL_REPRESENTATION('',(#874),#878);+#874 = LINE('',#875,#876);+#875 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#876 = VECTOR('',#877,1.);+#877 = DIRECTION('',(-0.,-1.));+#878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#879 = PCURVE('',#762,#880);+#880 = DEFINITIONAL_REPRESENTATION('',(#881),#885);+#881 = LINE('',#882,#883);+#882 = CARTESIAN_POINT('',(6.28318530718,0.));+#883 = VECTOR('',#884,1.);+#884 = DIRECTION('',(-0.,-1.));+#885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#886 = ORIENTED_EDGE('',*,*,#745,.T.);+#887 = ORIENTED_EDGE('',*,*,#864,.F.);+#888 = ORIENTED_EDGE('',*,*,#889,.T.);+#889 = EDGE_CURVE('',#865,#865,#890,.T.);+#890 = SURFACE_CURVE('',#891,(#896,#903),.PCURVE_S1.);+#891 = CIRCLE('',#892,0.37475);+#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895);+#893 = CARTESIAN_POINT('',(-2.719265789682,4.729265789682,2.6));+#894 = DIRECTION('',(0.,0.,1.));+#895 = DIRECTION('',(1.,0.,0.));+#896 = PCURVE('',#762,#897);+#897 = DEFINITIONAL_REPRESENTATION('',(#898),#902);+#898 = LINE('',#899,#900);+#899 = CARTESIAN_POINT('',(6.28318530718,0.));+#900 = VECTOR('',#901,1.);+#901 = DIRECTION('',(-1.,0.));+#902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#903 = PCURVE('',#904,#909);+#904 = PLANE('',#905);+#905 = AXIS2_PLACEMENT_3D('',#906,#907,#908);+#906 = CARTESIAN_POINT('',(-2.719265789682,4.729265789682,2.6));+#907 = DIRECTION('',(0.,0.,1.));+#908 = DIRECTION('',(1.,0.,0.));+#909 = DEFINITIONAL_REPRESENTATION('',(#910),#914);+#910 = CIRCLE('',#911,0.37475);+#911 = AXIS2_PLACEMENT_2D('',#912,#913);+#912 = CARTESIAN_POINT('',(0.,0.));+#913 = DIRECTION('',(1.,0.));+#914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#915 = ADVANCED_FACE('',(#916),#904,.T.);+#916 = FACE_BOUND('',#917,.T.);+#917 = EDGE_LOOP('',(#918));+#918 = ORIENTED_EDGE('',*,*,#889,.T.);+#919 = MANIFOLD_SOLID_BREP('',#920);+#920 = CLOSED_SHELL('',(#921,#1043,#1119,#1469,#1518,#1796,#1823,#1850,+ #1877,#1904,#1931,#1958,#1985,#2012,#2039,#2066));+#921 = ADVANCED_FACE('',(#922),#936,.T.);+#922 = FACE_BOUND('',#923,.T.);+#923 = EDGE_LOOP('',(#924,#959,#988,#1016));+#924 = ORIENTED_EDGE('',*,*,#925,.F.);+#925 = EDGE_CURVE('',#926,#928,#930,.T.);+#926 = VERTEX_POINT('',#927);+#927 = CARTESIAN_POINT('',(-3.4975,4.9,1.3));+#928 = VERTEX_POINT('',#929);+#929 = CARTESIAN_POINT('',(-3.4975,5.26,1.3));+#930 = SURFACE_CURVE('',#931,(#935,#947),.PCURVE_S1.);+#931 = LINE('',#932,#933);+#932 = CARTESIAN_POINT('',(-3.4975,4.9,1.3));+#933 = VECTOR('',#934,1.);+#934 = DIRECTION('',(0.,1.,0.));+#935 = PCURVE('',#936,#941);+#936 = CYLINDRICAL_SURFACE('',#937,0.1);+#937 = AXIS2_PLACEMENT_3D('',#938,#939,#940);+#938 = CARTESIAN_POINT('',(-3.4975,5.08,1.2));+#939 = DIRECTION('',(0.,1.,0.));+#940 = DIRECTION('',(-1.,-0.,-0.));+#941 = DEFINITIONAL_REPRESENTATION('',(#942),#946);+#942 = LINE('',#943,#944);+#943 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#944 = VECTOR('',#945,1.);+#945 = DIRECTION('',(-0.,1.));+#946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#947 = PCURVE('',#948,#953);+#948 = PLANE('',#949);+#949 = AXIS2_PLACEMENT_3D('',#950,#951,#952);+#950 = CARTESIAN_POINT('',(-3.4975,5.08,1.3));+#951 = DIRECTION('',(0.,0.,1.));+#952 = DIRECTION('',(1.,0.,0.));+#953 = DEFINITIONAL_REPRESENTATION('',(#954),#958);+#954 = LINE('',#955,#956);+#955 = CARTESIAN_POINT('',(0.,-0.18));+#956 = VECTOR('',#957,1.);+#957 = DIRECTION('',(0.,1.));+#958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#959 = ORIENTED_EDGE('',*,*,#960,.T.);+#960 = EDGE_CURVE('',#926,#961,#963,.T.);+#961 = VERTEX_POINT('',#962);+#962 = CARTESIAN_POINT('',(-3.4475,4.9,1.286602540378));+#963 = SURFACE_CURVE('',#964,(#969,#976),.PCURVE_S1.);+#964 = CIRCLE('',#965,0.1);+#965 = AXIS2_PLACEMENT_3D('',#966,#967,#968);+#966 = CARTESIAN_POINT('',(-3.4975,4.9,1.2));+#967 = DIRECTION('',(0.,1.,-0.));+#968 = DIRECTION('',(-1.,0.,0.));+#969 = PCURVE('',#936,#970);+#970 = DEFINITIONAL_REPRESENTATION('',(#971),#975);+#971 = LINE('',#972,#973);+#972 = CARTESIAN_POINT('',(0.,-0.18));+#973 = VECTOR('',#974,1.);+#974 = DIRECTION('',(1.,0.));+#975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#976 = PCURVE('',#977,#982);+#977 = PLANE('',#978);+#978 = AXIS2_PLACEMENT_3D('',#979,#980,#981);+#979 = CARTESIAN_POINT('',(-4.408401242914,4.9,0.524461625949));+#980 = DIRECTION('',(0.,1.,0.));+#981 = DIRECTION('',(0.,0.,-1.));+#982 = DEFINITIONAL_REPRESENTATION('',(#983),#987);+#983 = CIRCLE('',#984,0.1);+#984 = AXIS2_PLACEMENT_2D('',#985,#986);+#985 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#986 = DIRECTION('',(0.,1.));+#987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#988 = ORIENTED_EDGE('',*,*,#989,.T.);+#989 = EDGE_CURVE('',#961,#990,#992,.T.);+#990 = VERTEX_POINT('',#991);+#991 = CARTESIAN_POINT('',(-3.4475,5.26,1.286602540378));+#992 = SURFACE_CURVE('',#993,(#997,#1004),.PCURVE_S1.);+#993 = LINE('',#994,#995);+#994 = CARTESIAN_POINT('',(-3.4475,5.08,1.286602540378));+#995 = VECTOR('',#996,1.);+#996 = DIRECTION('',(0.,1.,0.));+#997 = PCURVE('',#936,#998);+#998 = DEFINITIONAL_REPRESENTATION('',(#999),#1003);+#999 = LINE('',#1000,#1001);+#1000 = CARTESIAN_POINT('',(2.094395102393,0.));+#1001 = VECTOR('',#1002,1.);+#1002 = DIRECTION('',(0.,1.));+#1003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1004 = PCURVE('',#1005,#1010);+#1005 = PLANE('',#1006);+#1006 = AXIS2_PLACEMENT_3D('',#1007,#1008,#1009);+#1007 = CARTESIAN_POINT('',(-3.4475,4.4,-0.5));+#1008 = DIRECTION('',(-1.,0.,0.));+#1009 = DIRECTION('',(0.,0.,-1.));+#1010 = DEFINITIONAL_REPRESENTATION('',(#1011),#1015);+#1011 = LINE('',#1012,#1013);+#1012 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#1013 = VECTOR('',#1014,1.);+#1014 = DIRECTION('',(0.,-1.));+#1015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1016 = ORIENTED_EDGE('',*,*,#1017,.F.);+#1017 = EDGE_CURVE('',#928,#990,#1018,.T.);+#1018 = SURFACE_CURVE('',#1019,(#1024,#1031),.PCURVE_S1.);+#1019 = CIRCLE('',#1020,0.1);+#1020 = AXIS2_PLACEMENT_3D('',#1021,#1022,#1023);+#1021 = CARTESIAN_POINT('',(-3.4975,5.26,1.2));+#1022 = DIRECTION('',(0.,1.,-0.));+#1023 = DIRECTION('',(-1.,0.,0.));+#1024 = PCURVE('',#936,#1025);+#1025 = DEFINITIONAL_REPRESENTATION('',(#1026),#1030);+#1026 = LINE('',#1027,#1028);+#1027 = CARTESIAN_POINT('',(-0.,0.18));+#1028 = VECTOR('',#1029,1.);+#1029 = DIRECTION('',(1.,-0.));+#1030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1031 = PCURVE('',#1032,#1037);+#1032 = PLANE('',#1033);+#1033 = AXIS2_PLACEMENT_3D('',#1034,#1035,#1036);+#1034 = CARTESIAN_POINT('',(-4.408401242914,5.26,0.524461625949));+#1035 = DIRECTION('',(0.,1.,0.));+#1036 = DIRECTION('',(0.,0.,-1.));+#1037 = DEFINITIONAL_REPRESENTATION('',(#1038),#1042);+#1038 = CIRCLE('',#1039,0.1);+#1039 = AXIS2_PLACEMENT_2D('',#1040,#1041);+#1040 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#1041 = DIRECTION('',(0.,1.));+#1042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1043 = ADVANCED_FACE('',(#1044),#948,.T.);+#1044 = FACE_BOUND('',#1045,.F.);+#1045 = EDGE_LOOP('',(#1046,#1047,#1070,#1098));+#1046 = ORIENTED_EDGE('',*,*,#925,.F.);+#1047 = ORIENTED_EDGE('',*,*,#1048,.T.);+#1048 = EDGE_CURVE('',#926,#1049,#1051,.T.);+#1049 = VERTEX_POINT('',#1050);+#1050 = CARTESIAN_POINT('',(-3.763569972422,4.9,1.3));+#1051 = SURFACE_CURVE('',#1052,(#1056,#1063),.PCURVE_S1.);+#1052 = LINE('',#1053,#1054);+#1053 = CARTESIAN_POINT('',(-3.4975,4.9,1.3));+#1054 = VECTOR('',#1055,1.);+#1055 = DIRECTION('',(-1.,-0.,-0.));+#1056 = PCURVE('',#948,#1057);+#1057 = DEFINITIONAL_REPRESENTATION('',(#1058),#1062);+#1058 = LINE('',#1059,#1060);+#1059 = CARTESIAN_POINT('',(0.,-0.18));+#1060 = VECTOR('',#1061,1.);+#1061 = DIRECTION('',(-1.,0.));+#1062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1063 = PCURVE('',#977,#1064);+#1064 = DEFINITIONAL_REPRESENTATION('',(#1065),#1069);+#1065 = LINE('',#1066,#1067);+#1066 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#1067 = VECTOR('',#1068,1.);+#1068 = DIRECTION('',(-0.,1.));+#1069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1070 = ORIENTED_EDGE('',*,*,#1071,.T.);+#1071 = EDGE_CURVE('',#1049,#1072,#1074,.T.);+#1072 = VERTEX_POINT('',#1073);+#1073 = CARTESIAN_POINT('',(-3.763569972422,5.26,1.3));+#1074 = SURFACE_CURVE('',#1075,(#1079,#1086),.PCURVE_S1.);+#1075 = LINE('',#1076,#1077);+#1076 = CARTESIAN_POINT('',(-3.763569972422,4.9,1.3));+#1077 = VECTOR('',#1078,1.);+#1078 = DIRECTION('',(0.,1.,0.));+#1079 = PCURVE('',#948,#1080);+#1080 = DEFINITIONAL_REPRESENTATION('',(#1081),#1085);+#1081 = LINE('',#1082,#1083);+#1082 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#1083 = VECTOR('',#1084,1.);+#1084 = DIRECTION('',(0.,1.));+#1085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1086 = PCURVE('',#1087,#1092);+#1087 = CYLINDRICAL_SURFACE('',#1088,0.28);+#1088 = AXIS2_PLACEMENT_3D('',#1089,#1090,#1091);+#1089 = CARTESIAN_POINT('',(-3.763569972422,5.08,1.02));+#1090 = DIRECTION('',(0.,1.,0.));+#1091 = DIRECTION('',(0.,0.,1.));+#1092 = DEFINITIONAL_REPRESENTATION('',(#1093),#1097);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(0.,1.));+#1097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1098 = ORIENTED_EDGE('',*,*,#1099,.F.);+#1099 = EDGE_CURVE('',#928,#1072,#1100,.T.);+#1100 = SURFACE_CURVE('',#1101,(#1105,#1112),.PCURVE_S1.);+#1101 = LINE('',#1102,#1103);+#1102 = CARTESIAN_POINT('',(-3.4975,5.26,1.3));+#1103 = VECTOR('',#1104,1.);+#1104 = DIRECTION('',(-1.,-0.,-0.));+#1105 = PCURVE('',#948,#1106);+#1106 = DEFINITIONAL_REPRESENTATION('',(#1107),#1111);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(0.,0.18));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(-1.,0.));+#1111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1112 = PCURVE('',#1032,#1113);+#1113 = DEFINITIONAL_REPRESENTATION('',(#1114),#1118);+#1114 = LINE('',#1115,#1116);+#1115 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#1116 = VECTOR('',#1117,1.);+#1117 = DIRECTION('',(-0.,1.));+#1118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1119 = ADVANCED_FACE('',(#1120),#1032,.T.);+#1120 = FACE_BOUND('',#1121,.F.);+#1121 = EDGE_LOOP('',(#1122,#1123,#1124,#1152,#1180,#1213,#1241,#1269,+ #1297,#1330,#1358,#1391,#1419,#1448));+#1122 = ORIENTED_EDGE('',*,*,#1017,.F.);+#1123 = ORIENTED_EDGE('',*,*,#1099,.T.);+#1124 = ORIENTED_EDGE('',*,*,#1125,.T.);+#1125 = EDGE_CURVE('',#1072,#1126,#1128,.T.);+#1126 = VERTEX_POINT('',#1127);+#1127 = CARTESIAN_POINT('',(-4.006065227246,5.26,1.159985897103));+#1128 = SURFACE_CURVE('',#1129,(#1134,#1145),.PCURVE_S1.);+#1129 = CIRCLE('',#1130,0.28);+#1130 = AXIS2_PLACEMENT_3D('',#1131,#1132,#1133);+#1131 = CARTESIAN_POINT('',(-3.763569972422,5.26,1.02));+#1132 = DIRECTION('',(0.,-1.,0.));+#1133 = DIRECTION('',(0.,0.,1.));+#1134 = PCURVE('',#1032,#1135);+#1135 = DEFINITIONAL_REPRESENTATION('',(#1136),#1144);+#1136 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1137,#1138,#1139,#1140,+#1141,#1142,#1143),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1137 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#1138 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#1139 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#1140 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#1141 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#1142 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#1143 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#1144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1145 = PCURVE('',#1087,#1146);+#1146 = DEFINITIONAL_REPRESENTATION('',(#1147),#1151);+#1147 = LINE('',#1148,#1149);+#1148 = CARTESIAN_POINT('',(6.28318530718,0.18));+#1149 = VECTOR('',#1150,1.);+#1150 = DIRECTION('',(-1.,-0.));+#1151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1152 = ORIENTED_EDGE('',*,*,#1153,.T.);+#1153 = EDGE_CURVE('',#1126,#1154,#1156,.T.);+#1154 = VERTEX_POINT('',#1155);+#1155 = CARTESIAN_POINT('',(-4.537145669057,5.26,0.240004029399));+#1156 = SURFACE_CURVE('',#1157,(#1161,#1168),.PCURVE_S1.);+#1157 = LINE('',#1158,#1159);+#1158 = CARTESIAN_POINT('',(-3.954105448151,5.26,1.249994963251));+#1159 = VECTOR('',#1160,1.);+#1160 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#1161 = PCURVE('',#1032,#1162);+#1162 = DEFINITIONAL_REPRESENTATION('',(#1163),#1167);+#1163 = LINE('',#1164,#1165);+#1164 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#1165 = VECTOR('',#1166,1.);+#1166 = DIRECTION('',(0.866054481515,0.499949632511));+#1167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1168 = PCURVE('',#1169,#1174);+#1169 = PLANE('',#1170);+#1170 = AXIS2_PLACEMENT_3D('',#1171,#1172,#1173);+#1171 = CARTESIAN_POINT('',(-4.006065227246,5.08,1.159985897103));+#1172 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#1173 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#1174 = DEFINITIONAL_REPRESENTATION('',(#1175),#1179);+#1175 = LINE('',#1176,#1177);+#1176 = CARTESIAN_POINT('',(0.103930027578,0.18));+#1177 = VECTOR('',#1178,1.);+#1178 = DIRECTION('',(-1.,0.));+#1179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1180 = ORIENTED_EDGE('',*,*,#1181,.F.);+#1181 = EDGE_CURVE('',#1182,#1154,#1184,.T.);+#1182 = VERTEX_POINT('',#1183);+#1183 = CARTESIAN_POINT('',(-4.606430027578,5.26,0.2));+#1184 = SURFACE_CURVE('',#1185,(#1190,#1201),.PCURVE_S1.);+#1185 = CIRCLE('',#1186,8.E-02);+#1186 = AXIS2_PLACEMENT_3D('',#1187,#1188,#1189);+#1187 = CARTESIAN_POINT('',(-4.606430027578,5.26,0.28));+#1188 = DIRECTION('',(0.,-1.,0.));+#1189 = DIRECTION('',(0.,0.,1.));+#1190 = PCURVE('',#1032,#1191);+#1191 = DEFINITIONAL_REPRESENTATION('',(#1192),#1200);+#1192 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1193,#1194,#1195,#1196,+#1197,#1198,#1199),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1193 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#1194 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#1195 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#1196 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#1197 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#1198 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#1199 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#1200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1201 = PCURVE('',#1202,#1207);+#1202 = CYLINDRICAL_SURFACE('',#1203,8.E-02);+#1203 = AXIS2_PLACEMENT_3D('',#1204,#1205,#1206);+#1204 = CARTESIAN_POINT('',(-4.606430027578,5.08,0.28));+#1205 = DIRECTION('',(0.,1.,0.));+#1206 = DIRECTION('',(0.,0.,1.));+#1207 = DEFINITIONAL_REPRESENTATION('',(#1208),#1212);+#1208 = LINE('',#1209,#1210);+#1209 = CARTESIAN_POINT('',(6.28318530718,0.18));+#1210 = VECTOR('',#1211,1.);+#1211 = DIRECTION('',(-1.,-0.));+#1212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1213 = ORIENTED_EDGE('',*,*,#1214,.T.);+#1214 = EDGE_CURVE('',#1182,#1215,#1217,.T.);+#1215 = VERTEX_POINT('',#1216);+#1216 = CARTESIAN_POINT('',(-5.255,5.26,0.2));+#1217 = SURFACE_CURVE('',#1218,(#1222,#1229),.PCURVE_S1.);+#1218 = LINE('',#1219,#1220);+#1219 = CARTESIAN_POINT('',(-4.5025,5.26,0.2));+#1220 = VECTOR('',#1221,1.);+#1221 = DIRECTION('',(-1.,-0.,-0.));+#1222 = PCURVE('',#1032,#1223);+#1223 = DEFINITIONAL_REPRESENTATION('',(#1224),#1228);+#1224 = LINE('',#1225,#1226);+#1225 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#1226 = VECTOR('',#1227,1.);+#1227 = DIRECTION('',(-0.,1.));+#1228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1229 = PCURVE('',#1230,#1235);+#1230 = PLANE('',#1231);+#1231 = AXIS2_PLACEMENT_3D('',#1232,#1233,#1234);+#1232 = CARTESIAN_POINT('',(-4.606430027578,5.08,0.2));+#1233 = DIRECTION('',(0.,0.,1.));+#1234 = DIRECTION('',(1.,0.,0.));+#1235 = DEFINITIONAL_REPRESENTATION('',(#1236),#1240);+#1236 = LINE('',#1237,#1238);+#1237 = CARTESIAN_POINT('',(0.103930027578,0.18));+#1238 = VECTOR('',#1239,1.);+#1239 = DIRECTION('',(-1.,0.));+#1240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1241 = ORIENTED_EDGE('',*,*,#1242,.T.);+#1242 = EDGE_CURVE('',#1215,#1243,#1245,.T.);+#1243 = VERTEX_POINT('',#1244);+#1244 = CARTESIAN_POINT('',(-5.255,5.26,0.));+#1245 = SURFACE_CURVE('',#1246,(#1250,#1257),.PCURVE_S1.);+#1246 = LINE('',#1247,#1248);+#1247 = CARTESIAN_POINT('',(-5.255,5.26,1.223081297441E-02));+#1248 = VECTOR('',#1249,1.);+#1249 = DIRECTION('',(-0.,-0.,-1.));+#1250 = PCURVE('',#1032,#1251);+#1251 = DEFINITIONAL_REPRESENTATION('',(#1252),#1256);+#1252 = LINE('',#1253,#1254);+#1253 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#1254 = VECTOR('',#1255,1.);+#1255 = DIRECTION('',(1.,0.));+#1256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1257 = PCURVE('',#1258,#1263);+#1258 = PLANE('',#1259);+#1259 = AXIS2_PLACEMENT_3D('',#1260,#1261,#1262);+#1260 = CARTESIAN_POINT('',(-5.255,4.4,-0.5));+#1261 = DIRECTION('',(-1.,0.,0.));+#1262 = DIRECTION('',(0.,0.,-1.));+#1263 = DEFINITIONAL_REPRESENTATION('',(#1264),#1268);+#1264 = LINE('',#1265,#1266);+#1265 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#1266 = VECTOR('',#1267,1.);+#1267 = DIRECTION('',(1.,0.));+#1268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1269 = ORIENTED_EDGE('',*,*,#1270,.F.);+#1270 = EDGE_CURVE('',#1271,#1243,#1273,.T.);+#1271 = VERTEX_POINT('',#1272);+#1272 = CARTESIAN_POINT('',(-4.606430027578,5.26,-5.551115123126E-17));+#1273 = SURFACE_CURVE('',#1274,(#1278,#1285),.PCURVE_S1.);+#1274 = LINE('',#1275,#1276);+#1275 = CARTESIAN_POINT('',(-4.5025,5.26,0.));+#1276 = VECTOR('',#1277,1.);+#1277 = DIRECTION('',(-1.,-0.,-0.));+#1278 = PCURVE('',#1032,#1279);+#1279 = DEFINITIONAL_REPRESENTATION('',(#1280),#1284);+#1280 = LINE('',#1281,#1282);+#1281 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#1282 = VECTOR('',#1283,1.);+#1283 = DIRECTION('',(-0.,1.));+#1284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1285 = PCURVE('',#1286,#1291);+#1286 = PLANE('',#1287);+#1287 = AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);+#1288 = CARTESIAN_POINT('',(-4.606430027578,5.08,0.));+#1289 = DIRECTION('',(0.,0.,1.));+#1290 = DIRECTION('',(1.,0.,0.));+#1291 = DEFINITIONAL_REPRESENTATION('',(#1292),#1296);+#1292 = LINE('',#1293,#1294);+#1293 = CARTESIAN_POINT('',(0.103930027578,0.18));+#1294 = VECTOR('',#1295,1.);+#1295 = DIRECTION('',(-1.,0.));+#1296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1297 = ORIENTED_EDGE('',*,*,#1298,.T.);+#1298 = EDGE_CURVE('',#1271,#1299,#1301,.T.);+#1299 = VERTEX_POINT('',#1300);+#1300 = CARTESIAN_POINT('',(-4.363934772754,5.26,0.140014102897));+#1301 = SURFACE_CURVE('',#1302,(#1307,#1318),.PCURVE_S1.);+#1302 = CIRCLE('',#1303,0.28);+#1303 = AXIS2_PLACEMENT_3D('',#1304,#1305,#1306);+#1304 = CARTESIAN_POINT('',(-4.606430027578,5.26,0.28));+#1305 = DIRECTION('',(0.,-1.,0.));+#1306 = DIRECTION('',(0.,0.,1.));+#1307 = PCURVE('',#1032,#1308);+#1308 = DEFINITIONAL_REPRESENTATION('',(#1309),#1317);+#1309 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1310,#1311,#1312,#1313,+#1314,#1315,#1316),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1310 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#1311 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#1312 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#1313 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#1314 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#1315 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#1316 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#1317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1318 = PCURVE('',#1319,#1324);+#1319 = CYLINDRICAL_SURFACE('',#1320,0.28);+#1320 = AXIS2_PLACEMENT_3D('',#1321,#1322,#1323);+#1321 = CARTESIAN_POINT('',(-4.606430027578,5.08,0.28));+#1322 = DIRECTION('',(0.,1.,0.));+#1323 = DIRECTION('',(0.,0.,1.));+#1324 = DEFINITIONAL_REPRESENTATION('',(#1325),#1329);+#1325 = LINE('',#1326,#1327);+#1326 = CARTESIAN_POINT('',(6.28318530718,0.18));+#1327 = VECTOR('',#1328,1.);+#1328 = DIRECTION('',(-1.,-0.));+#1329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1330 = ORIENTED_EDGE('',*,*,#1331,.F.);+#1331 = EDGE_CURVE('',#1332,#1299,#1334,.T.);+#1332 = VERTEX_POINT('',#1333);+#1333 = CARTESIAN_POINT('',(-3.832854330943,5.26,1.059995970601));+#1334 = SURFACE_CURVE('',#1335,(#1339,#1346),.PCURVE_S1.);+#1335 = LINE('',#1336,#1337);+#1336 = CARTESIAN_POINT('',(-3.780894551849,5.26,1.150005036749));+#1337 = VECTOR('',#1338,1.);+#1338 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#1339 = PCURVE('',#1032,#1340);+#1340 = DEFINITIONAL_REPRESENTATION('',(#1341),#1345);+#1341 = LINE('',#1342,#1343);+#1342 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#1343 = VECTOR('',#1344,1.);+#1344 = DIRECTION('',(0.866054481515,0.499949632511));+#1345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1346 = PCURVE('',#1347,#1352);+#1347 = PLANE('',#1348);+#1348 = AXIS2_PLACEMENT_3D('',#1349,#1350,#1351);+#1349 = CARTESIAN_POINT('',(-3.832854330943,5.08,1.059995970601));+#1350 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#1351 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#1352 = DEFINITIONAL_REPRESENTATION('',(#1353),#1357);+#1353 = LINE('',#1354,#1355);+#1354 = CARTESIAN_POINT('',(0.103930027578,0.18));+#1355 = VECTOR('',#1356,1.);+#1356 = DIRECTION('',(-1.,0.));+#1357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1358 = ORIENTED_EDGE('',*,*,#1359,.F.);+#1359 = EDGE_CURVE('',#1360,#1332,#1362,.T.);+#1360 = VERTEX_POINT('',#1361);+#1361 = CARTESIAN_POINT('',(-3.763569972422,5.26,1.1));+#1362 = SURFACE_CURVE('',#1363,(#1368,#1379),.PCURVE_S1.);+#1363 = CIRCLE('',#1364,8.E-02);+#1364 = AXIS2_PLACEMENT_3D('',#1365,#1366,#1367);+#1365 = CARTESIAN_POINT('',(-3.763569972422,5.26,1.02));+#1366 = DIRECTION('',(0.,-1.,0.));+#1367 = DIRECTION('',(0.,0.,1.));+#1368 = PCURVE('',#1032,#1369);+#1369 = DEFINITIONAL_REPRESENTATION('',(#1370),#1378);+#1370 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1371,#1372,#1373,#1374,+#1375,#1376,#1377),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1371 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#1372 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#1373 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#1374 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#1375 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#1376 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#1377 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#1378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1379 = PCURVE('',#1380,#1385);+#1380 = CYLINDRICAL_SURFACE('',#1381,8.E-02);+#1381 = AXIS2_PLACEMENT_3D('',#1382,#1383,#1384);+#1382 = CARTESIAN_POINT('',(-3.763569972422,5.08,1.02));+#1383 = DIRECTION('',(0.,1.,0.));+#1384 = DIRECTION('',(0.,0.,1.));+#1385 = DEFINITIONAL_REPRESENTATION('',(#1386),#1390);+#1386 = LINE('',#1387,#1388);+#1387 = CARTESIAN_POINT('',(6.28318530718,0.18));+#1388 = VECTOR('',#1389,1.);+#1389 = DIRECTION('',(-1.,-0.));+#1390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1391 = ORIENTED_EDGE('',*,*,#1392,.F.);+#1392 = EDGE_CURVE('',#1393,#1360,#1395,.T.);+#1393 = VERTEX_POINT('',#1394);+#1394 = CARTESIAN_POINT('',(-3.4975,5.26,1.1));+#1395 = SURFACE_CURVE('',#1396,(#1400,#1407),.PCURVE_S1.);+#1396 = LINE('',#1397,#1398);+#1397 = CARTESIAN_POINT('',(-3.4975,5.26,1.1));+#1398 = VECTOR('',#1399,1.);+#1399 = DIRECTION('',(-1.,-0.,-0.));+#1400 = PCURVE('',#1032,#1401);+#1401 = DEFINITIONAL_REPRESENTATION('',(#1402),#1406);+#1402 = LINE('',#1403,#1404);+#1403 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#1404 = VECTOR('',#1405,1.);+#1405 = DIRECTION('',(-0.,1.));+#1406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1407 = PCURVE('',#1408,#1413);+#1408 = PLANE('',#1409);+#1409 = AXIS2_PLACEMENT_3D('',#1410,#1411,#1412);+#1410 = CARTESIAN_POINT('',(-3.4975,5.08,1.1));+#1411 = DIRECTION('',(0.,0.,1.));+#1412 = DIRECTION('',(1.,0.,0.));+#1413 = DEFINITIONAL_REPRESENTATION('',(#1414),#1418);+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(0.,0.18));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(-1.,0.));+#1418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1419 = ORIENTED_EDGE('',*,*,#1420,.F.);+#1420 = EDGE_CURVE('',#1421,#1393,#1423,.T.);+#1421 = VERTEX_POINT('',#1422);+#1422 = CARTESIAN_POINT('',(-3.4475,5.26,1.113397459622));+#1423 = SURFACE_CURVE('',#1424,(#1429,#1436),.PCURVE_S1.);+#1424 = CIRCLE('',#1425,0.1);+#1425 = AXIS2_PLACEMENT_3D('',#1426,#1427,#1428);+#1426 = CARTESIAN_POINT('',(-3.4975,5.26,1.2));+#1427 = DIRECTION('',(0.,1.,-0.));+#1428 = DIRECTION('',(-1.,0.,0.));+#1429 = PCURVE('',#1032,#1430);+#1430 = DEFINITIONAL_REPRESENTATION('',(#1431),#1435);+#1431 = CIRCLE('',#1432,0.1);+#1432 = AXIS2_PLACEMENT_2D('',#1433,#1434);+#1433 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#1434 = DIRECTION('',(0.,1.));+#1435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1436 = PCURVE('',#1437,#1442);+#1437 = CYLINDRICAL_SURFACE('',#1438,0.1);+#1438 = AXIS2_PLACEMENT_3D('',#1439,#1440,#1441);+#1439 = CARTESIAN_POINT('',(-3.4975,5.08,1.2));+#1440 = DIRECTION('',(0.,1.,0.));+#1441 = DIRECTION('',(-1.,-0.,-0.));+#1442 = DEFINITIONAL_REPRESENTATION('',(#1443),#1447);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(-0.,0.18));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(1.,-0.));+#1447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1448 = ORIENTED_EDGE('',*,*,#1449,.F.);+#1449 = EDGE_CURVE('',#990,#1421,#1450,.T.);+#1450 = SURFACE_CURVE('',#1451,(#1455,#1462),.PCURVE_S1.);+#1451 = LINE('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(-3.4475,5.26,1.223081297441E-02));+#1453 = VECTOR('',#1454,1.);+#1454 = DIRECTION('',(-0.,-0.,-1.));+#1455 = PCURVE('',#1032,#1456);+#1456 = DEFINITIONAL_REPRESENTATION('',(#1457),#1461);+#1457 = LINE('',#1458,#1459);+#1458 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#1459 = VECTOR('',#1460,1.);+#1460 = DIRECTION('',(1.,0.));+#1461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1462 = PCURVE('',#1005,#1463);+#1463 = DEFINITIONAL_REPRESENTATION('',(#1464),#1468);+#1464 = LINE('',#1465,#1466);+#1465 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#1466 = VECTOR('',#1467,1.);+#1467 = DIRECTION('',(1.,0.));+#1468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1469 = ADVANCED_FACE('',(#1470),#1005,.F.);+#1470 = FACE_BOUND('',#1471,.T.);+#1471 = EDGE_LOOP('',(#1472,#1473,#1496,#1517));+#1472 = ORIENTED_EDGE('',*,*,#989,.F.);+#1473 = ORIENTED_EDGE('',*,*,#1474,.T.);+#1474 = EDGE_CURVE('',#961,#1475,#1477,.T.);+#1475 = VERTEX_POINT('',#1476);+#1476 = CARTESIAN_POINT('',(-3.4475,4.9,1.113397459622));+#1477 = SURFACE_CURVE('',#1478,(#1482,#1489),.PCURVE_S1.);+#1478 = LINE('',#1479,#1480);+#1479 = CARTESIAN_POINT('',(-3.4475,4.9,1.223081297441E-02));+#1480 = VECTOR('',#1481,1.);+#1481 = DIRECTION('',(-0.,-0.,-1.));+#1482 = PCURVE('',#1005,#1483);+#1483 = DEFINITIONAL_REPRESENTATION('',(#1484),#1488);+#1484 = LINE('',#1485,#1486);+#1485 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#1486 = VECTOR('',#1487,1.);+#1487 = DIRECTION('',(1.,0.));+#1488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1489 = PCURVE('',#977,#1490);+#1490 = DEFINITIONAL_REPRESENTATION('',(#1491),#1495);+#1491 = LINE('',#1492,#1493);+#1492 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#1493 = VECTOR('',#1494,1.);+#1494 = DIRECTION('',(1.,0.));+#1495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1496 = ORIENTED_EDGE('',*,*,#1497,.T.);+#1497 = EDGE_CURVE('',#1475,#1421,#1498,.T.);+#1498 = SURFACE_CURVE('',#1499,(#1503,#1510),.PCURVE_S1.);+#1499 = LINE('',#1500,#1501);+#1500 = CARTESIAN_POINT('',(-3.4475,5.08,1.113397459622));+#1501 = VECTOR('',#1502,1.);+#1502 = DIRECTION('',(0.,1.,0.));+#1503 = PCURVE('',#1005,#1504);+#1504 = DEFINITIONAL_REPRESENTATION('',(#1505),#1509);+#1505 = LINE('',#1506,#1507);+#1506 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#1507 = VECTOR('',#1508,1.);+#1508 = DIRECTION('',(0.,-1.));+#1509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1510 = PCURVE('',#1437,#1511);+#1511 = DEFINITIONAL_REPRESENTATION('',(#1512),#1516);+#1512 = LINE('',#1513,#1514);+#1513 = CARTESIAN_POINT('',(4.188790204786,0.));+#1514 = VECTOR('',#1515,1.);+#1515 = DIRECTION('',(0.,1.));+#1516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1517 = ORIENTED_EDGE('',*,*,#1449,.F.);+#1518 = ADVANCED_FACE('',(#1519),#977,.F.);+#1519 = FACE_BOUND('',#1520,.T.);+#1520 = EDGE_LOOP('',(#1521,#1522,#1523,#1551,#1574,#1602,#1625,#1648,+ #1671,#1699,#1722,#1750,#1773,#1795));+#1521 = ORIENTED_EDGE('',*,*,#960,.F.);+#1522 = ORIENTED_EDGE('',*,*,#1048,.T.);+#1523 = ORIENTED_EDGE('',*,*,#1524,.T.);+#1524 = EDGE_CURVE('',#1049,#1525,#1527,.T.);+#1525 = VERTEX_POINT('',#1526);+#1526 = CARTESIAN_POINT('',(-4.006065227246,4.9,1.159985897103));+#1527 = SURFACE_CURVE('',#1528,(#1533,#1544),.PCURVE_S1.);+#1528 = CIRCLE('',#1529,0.28);+#1529 = AXIS2_PLACEMENT_3D('',#1530,#1531,#1532);+#1530 = CARTESIAN_POINT('',(-3.763569972422,4.9,1.02));+#1531 = DIRECTION('',(0.,-1.,0.));+#1532 = DIRECTION('',(0.,0.,1.));+#1533 = PCURVE('',#977,#1534);+#1534 = DEFINITIONAL_REPRESENTATION('',(#1535),#1543);+#1535 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1536,#1537,#1538,#1539,+#1540,#1541,#1542),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1536 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#1537 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#1538 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#1539 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#1540 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#1541 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#1542 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#1543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1544 = PCURVE('',#1087,#1545);+#1545 = DEFINITIONAL_REPRESENTATION('',(#1546),#1550);+#1546 = LINE('',#1547,#1548);+#1547 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#1548 = VECTOR('',#1549,1.);+#1549 = DIRECTION('',(-1.,0.));+#1550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1551 = ORIENTED_EDGE('',*,*,#1552,.T.);+#1552 = EDGE_CURVE('',#1525,#1553,#1555,.T.);+#1553 = VERTEX_POINT('',#1554);+#1554 = CARTESIAN_POINT('',(-4.537145669057,4.9,0.240004029399));+#1555 = SURFACE_CURVE('',#1556,(#1560,#1567),.PCURVE_S1.);+#1556 = LINE('',#1557,#1558);+#1557 = CARTESIAN_POINT('',(-3.954105448151,4.9,1.249994963251));+#1558 = VECTOR('',#1559,1.);+#1559 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#1560 = PCURVE('',#977,#1561);+#1561 = DEFINITIONAL_REPRESENTATION('',(#1562),#1566);+#1562 = LINE('',#1563,#1564);+#1563 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#1564 = VECTOR('',#1565,1.);+#1565 = DIRECTION('',(0.866054481515,0.499949632511));+#1566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1567 = PCURVE('',#1169,#1568);+#1568 = DEFINITIONAL_REPRESENTATION('',(#1569),#1573);+#1569 = LINE('',#1570,#1571);+#1570 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#1571 = VECTOR('',#1572,1.);+#1572 = DIRECTION('',(-1.,0.));+#1573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1574 = ORIENTED_EDGE('',*,*,#1575,.F.);+#1575 = EDGE_CURVE('',#1576,#1553,#1578,.T.);+#1576 = VERTEX_POINT('',#1577);+#1577 = CARTESIAN_POINT('',(-4.606430027578,4.9,0.2));+#1578 = SURFACE_CURVE('',#1579,(#1584,#1595),.PCURVE_S1.);+#1579 = CIRCLE('',#1580,8.E-02);+#1580 = AXIS2_PLACEMENT_3D('',#1581,#1582,#1583);+#1581 = CARTESIAN_POINT('',(-4.606430027578,4.9,0.28));+#1582 = DIRECTION('',(0.,-1.,0.));+#1583 = DIRECTION('',(0.,0.,1.));+#1584 = PCURVE('',#977,#1585);+#1585 = DEFINITIONAL_REPRESENTATION('',(#1586),#1594);+#1586 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1587,#1588,#1589,#1590,+#1591,#1592,#1593),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1587 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#1588 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#1589 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#1590 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#1591 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#1592 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#1593 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#1594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1595 = PCURVE('',#1202,#1596);+#1596 = DEFINITIONAL_REPRESENTATION('',(#1597),#1601);+#1597 = LINE('',#1598,#1599);+#1598 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#1599 = VECTOR('',#1600,1.);+#1600 = DIRECTION('',(-1.,0.));+#1601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1602 = ORIENTED_EDGE('',*,*,#1603,.T.);+#1603 = EDGE_CURVE('',#1576,#1604,#1606,.T.);+#1604 = VERTEX_POINT('',#1605);+#1605 = CARTESIAN_POINT('',(-5.255,4.9,0.2));+#1606 = SURFACE_CURVE('',#1607,(#1611,#1618),.PCURVE_S1.);+#1607 = LINE('',#1608,#1609);+#1608 = CARTESIAN_POINT('',(-4.5025,4.9,0.2));+#1609 = VECTOR('',#1610,1.);+#1610 = DIRECTION('',(-1.,-0.,-0.));+#1611 = PCURVE('',#977,#1612);+#1612 = DEFINITIONAL_REPRESENTATION('',(#1613),#1617);+#1613 = LINE('',#1614,#1615);+#1614 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#1615 = VECTOR('',#1616,1.);+#1616 = DIRECTION('',(-0.,1.));+#1617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1618 = PCURVE('',#1230,#1619);+#1619 = DEFINITIONAL_REPRESENTATION('',(#1620),#1624);+#1620 = LINE('',#1621,#1622);+#1621 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#1622 = VECTOR('',#1623,1.);+#1623 = DIRECTION('',(-1.,0.));+#1624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1625 = ORIENTED_EDGE('',*,*,#1626,.T.);+#1626 = EDGE_CURVE('',#1604,#1627,#1629,.T.);+#1627 = VERTEX_POINT('',#1628);+#1628 = CARTESIAN_POINT('',(-5.255,4.9,0.));+#1629 = SURFACE_CURVE('',#1630,(#1634,#1641),.PCURVE_S1.);+#1630 = LINE('',#1631,#1632);+#1631 = CARTESIAN_POINT('',(-5.255,4.9,1.223081297441E-02));+#1632 = VECTOR('',#1633,1.);+#1633 = DIRECTION('',(-0.,-0.,-1.));+#1634 = PCURVE('',#977,#1635);+#1635 = DEFINITIONAL_REPRESENTATION('',(#1636),#1640);+#1636 = LINE('',#1637,#1638);+#1637 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#1638 = VECTOR('',#1639,1.);+#1639 = DIRECTION('',(1.,0.));+#1640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1641 = PCURVE('',#1258,#1642);+#1642 = DEFINITIONAL_REPRESENTATION('',(#1643),#1647);+#1643 = LINE('',#1644,#1645);+#1644 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#1645 = VECTOR('',#1646,1.);+#1646 = DIRECTION('',(1.,0.));+#1647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1648 = ORIENTED_EDGE('',*,*,#1649,.F.);+#1649 = EDGE_CURVE('',#1650,#1627,#1652,.T.);+#1650 = VERTEX_POINT('',#1651);+#1651 = CARTESIAN_POINT('',(-4.606430027578,4.9,-5.551115123126E-17));+#1652 = SURFACE_CURVE('',#1653,(#1657,#1664),.PCURVE_S1.);+#1653 = LINE('',#1654,#1655);+#1654 = CARTESIAN_POINT('',(-4.5025,4.9,0.));+#1655 = VECTOR('',#1656,1.);+#1656 = DIRECTION('',(-1.,-0.,-0.));+#1657 = PCURVE('',#977,#1658);+#1658 = DEFINITIONAL_REPRESENTATION('',(#1659),#1663);+#1659 = LINE('',#1660,#1661);+#1660 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#1661 = VECTOR('',#1662,1.);+#1662 = DIRECTION('',(-0.,1.));+#1663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1664 = PCURVE('',#1286,#1665);+#1665 = DEFINITIONAL_REPRESENTATION('',(#1666),#1670);+#1666 = LINE('',#1667,#1668);+#1667 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#1668 = VECTOR('',#1669,1.);+#1669 = DIRECTION('',(-1.,0.));+#1670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1671 = ORIENTED_EDGE('',*,*,#1672,.T.);+#1672 = EDGE_CURVE('',#1650,#1673,#1675,.T.);+#1673 = VERTEX_POINT('',#1674);+#1674 = CARTESIAN_POINT('',(-4.363934772754,4.9,0.140014102897));+#1675 = SURFACE_CURVE('',#1676,(#1681,#1692),.PCURVE_S1.);+#1676 = CIRCLE('',#1677,0.28);+#1677 = AXIS2_PLACEMENT_3D('',#1678,#1679,#1680);+#1678 = CARTESIAN_POINT('',(-4.606430027578,4.9,0.28));+#1679 = DIRECTION('',(0.,-1.,0.));+#1680 = DIRECTION('',(0.,0.,1.));+#1681 = PCURVE('',#977,#1682);+#1682 = DEFINITIONAL_REPRESENTATION('',(#1683),#1691);+#1683 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1684,#1685,#1686,#1687,+#1688,#1689,#1690),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1684 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#1685 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#1686 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#1687 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#1688 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#1689 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#1690 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#1691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1692 = PCURVE('',#1319,#1693);+#1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(-1.,0.));+#1698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1699 = ORIENTED_EDGE('',*,*,#1700,.F.);+#1700 = EDGE_CURVE('',#1701,#1673,#1703,.T.);+#1701 = VERTEX_POINT('',#1702);+#1702 = CARTESIAN_POINT('',(-3.832854330943,4.9,1.059995970601));+#1703 = SURFACE_CURVE('',#1704,(#1708,#1715),.PCURVE_S1.);+#1704 = LINE('',#1705,#1706);+#1705 = CARTESIAN_POINT('',(-3.780894551849,4.9,1.150005036749));+#1706 = VECTOR('',#1707,1.);+#1707 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#1708 = PCURVE('',#977,#1709);+#1709 = DEFINITIONAL_REPRESENTATION('',(#1710),#1714);+#1710 = LINE('',#1711,#1712);+#1711 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#1712 = VECTOR('',#1713,1.);+#1713 = DIRECTION('',(0.866054481515,0.499949632511));+#1714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1715 = PCURVE('',#1347,#1716);+#1716 = DEFINITIONAL_REPRESENTATION('',(#1717),#1721);+#1717 = LINE('',#1718,#1719);+#1718 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#1719 = VECTOR('',#1720,1.);+#1720 = DIRECTION('',(-1.,0.));+#1721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1722 = ORIENTED_EDGE('',*,*,#1723,.F.);+#1723 = EDGE_CURVE('',#1724,#1701,#1726,.T.);+#1724 = VERTEX_POINT('',#1725);+#1725 = CARTESIAN_POINT('',(-3.763569972422,4.9,1.1));+#1726 = SURFACE_CURVE('',#1727,(#1732,#1743),.PCURVE_S1.);+#1727 = CIRCLE('',#1728,8.E-02);+#1728 = AXIS2_PLACEMENT_3D('',#1729,#1730,#1731);+#1729 = CARTESIAN_POINT('',(-3.763569972422,4.9,1.02));+#1730 = DIRECTION('',(0.,-1.,0.));+#1731 = DIRECTION('',(0.,0.,1.));+#1732 = PCURVE('',#977,#1733);+#1733 = DEFINITIONAL_REPRESENTATION('',(#1734),#1742);+#1734 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1735,#1736,#1737,#1738,+#1739,#1740,#1741),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1735 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#1736 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#1737 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#1738 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#1739 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#1740 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#1741 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#1742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1743 = PCURVE('',#1380,#1744);+#1744 = DEFINITIONAL_REPRESENTATION('',(#1745),#1749);+#1745 = LINE('',#1746,#1747);+#1746 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#1747 = VECTOR('',#1748,1.);+#1748 = DIRECTION('',(-1.,0.));+#1749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1750 = ORIENTED_EDGE('',*,*,#1751,.F.);+#1751 = EDGE_CURVE('',#1752,#1724,#1754,.T.);+#1752 = VERTEX_POINT('',#1753);+#1753 = CARTESIAN_POINT('',(-3.4975,4.9,1.1));+#1754 = SURFACE_CURVE('',#1755,(#1759,#1766),.PCURVE_S1.);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-3.4975,4.9,1.1));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(-1.,-0.,-0.));+#1759 = PCURVE('',#977,#1760);+#1760 = DEFINITIONAL_REPRESENTATION('',(#1761),#1765);+#1761 = LINE('',#1762,#1763);+#1762 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#1763 = VECTOR('',#1764,1.);+#1764 = DIRECTION('',(-0.,1.));+#1765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1766 = PCURVE('',#1408,#1767);+#1767 = DEFINITIONAL_REPRESENTATION('',(#1768),#1772);+#1768 = LINE('',#1769,#1770);+#1769 = CARTESIAN_POINT('',(0.,-0.18));+#1770 = VECTOR('',#1771,1.);+#1771 = DIRECTION('',(-1.,0.));+#1772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1773 = ORIENTED_EDGE('',*,*,#1774,.F.);+#1774 = EDGE_CURVE('',#1475,#1752,#1775,.T.);+#1775 = SURFACE_CURVE('',#1776,(#1781,#1788),.PCURVE_S1.);+#1776 = CIRCLE('',#1777,0.1);+#1777 = AXIS2_PLACEMENT_3D('',#1778,#1779,#1780);+#1778 = CARTESIAN_POINT('',(-3.4975,4.9,1.2));+#1779 = DIRECTION('',(0.,1.,-0.));+#1780 = DIRECTION('',(-1.,0.,0.));+#1781 = PCURVE('',#977,#1782);+#1782 = DEFINITIONAL_REPRESENTATION('',(#1783),#1787);+#1783 = CIRCLE('',#1784,0.1);+#1784 = AXIS2_PLACEMENT_2D('',#1785,#1786);+#1785 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#1786 = DIRECTION('',(0.,1.));+#1787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1788 = PCURVE('',#1437,#1789);+#1789 = DEFINITIONAL_REPRESENTATION('',(#1790),#1794);+#1790 = LINE('',#1791,#1792);+#1791 = CARTESIAN_POINT('',(0.,-0.18));+#1792 = VECTOR('',#1793,1.);+#1793 = DIRECTION('',(1.,0.));+#1794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1795 = ORIENTED_EDGE('',*,*,#1474,.F.);+#1796 = ADVANCED_FACE('',(#1797),#1087,.T.);+#1797 = FACE_BOUND('',#1798,.T.);+#1798 = EDGE_LOOP('',(#1799,#1800,#1821,#1822));+#1799 = ORIENTED_EDGE('',*,*,#1125,.T.);+#1800 = ORIENTED_EDGE('',*,*,#1801,.F.);+#1801 = EDGE_CURVE('',#1525,#1126,#1802,.T.);+#1802 = SURFACE_CURVE('',#1803,(#1807,#1814),.PCURVE_S1.);+#1803 = LINE('',#1804,#1805);+#1804 = CARTESIAN_POINT('',(-4.006065227246,4.9,1.159985897103));+#1805 = VECTOR('',#1806,1.);+#1806 = DIRECTION('',(0.,1.,0.));+#1807 = PCURVE('',#1087,#1808);+#1808 = DEFINITIONAL_REPRESENTATION('',(#1809),#1813);+#1809 = LINE('',#1810,#1811);+#1810 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#1811 = VECTOR('',#1812,1.);+#1812 = DIRECTION('',(0.,1.));+#1813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1814 = PCURVE('',#1169,#1815);+#1815 = DEFINITIONAL_REPRESENTATION('',(#1816),#1820);+#1816 = LINE('',#1817,#1818);+#1817 = CARTESIAN_POINT('',(0.,-0.18));+#1818 = VECTOR('',#1819,1.);+#1819 = DIRECTION('',(0.,1.));+#1820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1821 = ORIENTED_EDGE('',*,*,#1524,.F.);+#1822 = ORIENTED_EDGE('',*,*,#1071,.T.);+#1823 = ADVANCED_FACE('',(#1824),#1437,.T.);+#1824 = FACE_BOUND('',#1825,.T.);+#1825 = EDGE_LOOP('',(#1826,#1827,#1828,#1849));+#1826 = ORIENTED_EDGE('',*,*,#1497,.F.);+#1827 = ORIENTED_EDGE('',*,*,#1774,.T.);+#1828 = ORIENTED_EDGE('',*,*,#1829,.F.);+#1829 = EDGE_CURVE('',#1393,#1752,#1830,.T.);+#1830 = SURFACE_CURVE('',#1831,(#1835,#1842),.PCURVE_S1.);+#1831 = LINE('',#1832,#1833);+#1832 = CARTESIAN_POINT('',(-3.4975,5.26,1.1));+#1833 = VECTOR('',#1834,1.);+#1834 = DIRECTION('',(-0.,-1.,-0.));+#1835 = PCURVE('',#1437,#1836);+#1836 = DEFINITIONAL_REPRESENTATION('',(#1837),#1841);+#1837 = LINE('',#1838,#1839);+#1838 = CARTESIAN_POINT('',(4.712388980385,0.18));+#1839 = VECTOR('',#1840,1.);+#1840 = DIRECTION('',(0.,-1.));+#1841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1842 = PCURVE('',#1408,#1843);+#1843 = DEFINITIONAL_REPRESENTATION('',(#1844),#1848);+#1844 = LINE('',#1845,#1846);+#1845 = CARTESIAN_POINT('',(0.,0.18));+#1846 = VECTOR('',#1847,1.);+#1847 = DIRECTION('',(0.,-1.));+#1848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1849 = ORIENTED_EDGE('',*,*,#1420,.F.);+#1850 = ADVANCED_FACE('',(#1851),#1408,.F.);+#1851 = FACE_BOUND('',#1852,.T.);+#1852 = EDGE_LOOP('',(#1853,#1854,#1875,#1876));+#1853 = ORIENTED_EDGE('',*,*,#1751,.T.);+#1854 = ORIENTED_EDGE('',*,*,#1855,.F.);+#1855 = EDGE_CURVE('',#1360,#1724,#1856,.T.);+#1856 = SURFACE_CURVE('',#1857,(#1861,#1868),.PCURVE_S1.);+#1857 = LINE('',#1858,#1859);+#1858 = CARTESIAN_POINT('',(-3.763569972422,5.26,1.1));+#1859 = VECTOR('',#1860,1.);+#1860 = DIRECTION('',(-0.,-1.,-0.));+#1861 = PCURVE('',#1408,#1862);+#1862 = DEFINITIONAL_REPRESENTATION('',(#1863),#1867);+#1863 = LINE('',#1864,#1865);+#1864 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#1865 = VECTOR('',#1866,1.);+#1866 = DIRECTION('',(0.,-1.));+#1867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1868 = PCURVE('',#1380,#1869);+#1869 = DEFINITIONAL_REPRESENTATION('',(#1870),#1874);+#1870 = LINE('',#1871,#1872);+#1871 = CARTESIAN_POINT('',(6.28318530718,0.18));+#1872 = VECTOR('',#1873,1.);+#1873 = DIRECTION('',(-0.,-1.));+#1874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1875 = ORIENTED_EDGE('',*,*,#1392,.F.);+#1876 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1877 = ADVANCED_FACE('',(#1878),#1380,.F.);+#1878 = FACE_BOUND('',#1879,.F.);+#1879 = EDGE_LOOP('',(#1880,#1881,#1882,#1903));+#1880 = ORIENTED_EDGE('',*,*,#1855,.F.);+#1881 = ORIENTED_EDGE('',*,*,#1359,.T.);+#1882 = ORIENTED_EDGE('',*,*,#1883,.T.);+#1883 = EDGE_CURVE('',#1332,#1701,#1884,.T.);+#1884 = SURFACE_CURVE('',#1885,(#1889,#1896),.PCURVE_S1.);+#1885 = LINE('',#1886,#1887);+#1886 = CARTESIAN_POINT('',(-3.832854330943,5.26,1.059995970601));+#1887 = VECTOR('',#1888,1.);+#1888 = DIRECTION('',(-0.,-1.,-0.));+#1889 = PCURVE('',#1380,#1890);+#1890 = DEFINITIONAL_REPRESENTATION('',(#1891),#1895);+#1891 = LINE('',#1892,#1893);+#1892 = CARTESIAN_POINT('',(5.235929597593,0.18));+#1893 = VECTOR('',#1894,1.);+#1894 = DIRECTION('',(-0.,-1.));+#1895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1896 = PCURVE('',#1347,#1897);+#1897 = DEFINITIONAL_REPRESENTATION('',(#1898),#1902);+#1898 = LINE('',#1899,#1900);+#1899 = CARTESIAN_POINT('',(0.,0.18));+#1900 = VECTOR('',#1901,1.);+#1901 = DIRECTION('',(0.,-1.));+#1902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1903 = ORIENTED_EDGE('',*,*,#1723,.F.);+#1904 = ADVANCED_FACE('',(#1905),#1347,.F.);+#1905 = FACE_BOUND('',#1906,.T.);+#1906 = EDGE_LOOP('',(#1907,#1908,#1929,#1930));+#1907 = ORIENTED_EDGE('',*,*,#1700,.T.);+#1908 = ORIENTED_EDGE('',*,*,#1909,.F.);+#1909 = EDGE_CURVE('',#1299,#1673,#1910,.T.);+#1910 = SURFACE_CURVE('',#1911,(#1915,#1922),.PCURVE_S1.);+#1911 = LINE('',#1912,#1913);+#1912 = CARTESIAN_POINT('',(-4.363934772754,5.26,0.140014102897));+#1913 = VECTOR('',#1914,1.);+#1914 = DIRECTION('',(-0.,-1.,-0.));+#1915 = PCURVE('',#1347,#1916);+#1916 = DEFINITIONAL_REPRESENTATION('',(#1917),#1921);+#1917 = LINE('',#1918,#1919);+#1918 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#1919 = VECTOR('',#1920,1.);+#1920 = DIRECTION('',(0.,-1.));+#1921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1922 = PCURVE('',#1319,#1923);+#1923 = DEFINITIONAL_REPRESENTATION('',(#1924),#1928);+#1924 = LINE('',#1925,#1926);+#1925 = CARTESIAN_POINT('',(2.094336944003,0.18));+#1926 = VECTOR('',#1927,1.);+#1927 = DIRECTION('',(-0.,-1.));+#1928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1929 = ORIENTED_EDGE('',*,*,#1331,.F.);+#1930 = ORIENTED_EDGE('',*,*,#1883,.T.);+#1931 = ADVANCED_FACE('',(#1932),#1319,.T.);+#1932 = FACE_BOUND('',#1933,.T.);+#1933 = EDGE_LOOP('',(#1934,#1955,#1956,#1957));+#1934 = ORIENTED_EDGE('',*,*,#1935,.F.);+#1935 = EDGE_CURVE('',#1271,#1650,#1936,.T.);+#1936 = SURFACE_CURVE('',#1937,(#1941,#1948),.PCURVE_S1.);+#1937 = LINE('',#1938,#1939);+#1938 = CARTESIAN_POINT('',(-4.606430027578,5.26,-5.551115123126E-17));+#1939 = VECTOR('',#1940,1.);+#1940 = DIRECTION('',(-0.,-1.,-0.));+#1941 = PCURVE('',#1319,#1942);+#1942 = DEFINITIONAL_REPRESENTATION('',(#1943),#1947);+#1943 = LINE('',#1944,#1945);+#1944 = CARTESIAN_POINT('',(3.14159265359,0.18));+#1945 = VECTOR('',#1946,1.);+#1946 = DIRECTION('',(-0.,-1.));+#1947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1948 = PCURVE('',#1286,#1949);+#1949 = DEFINITIONAL_REPRESENTATION('',(#1950),#1954);+#1950 = LINE('',#1951,#1952);+#1951 = CARTESIAN_POINT('',(0.,0.18));+#1952 = VECTOR('',#1953,1.);+#1953 = DIRECTION('',(0.,-1.));+#1954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1955 = ORIENTED_EDGE('',*,*,#1298,.T.);+#1956 = ORIENTED_EDGE('',*,*,#1909,.T.);+#1957 = ORIENTED_EDGE('',*,*,#1672,.F.);+#1958 = ADVANCED_FACE('',(#1959),#1286,.F.);+#1959 = FACE_BOUND('',#1960,.T.);+#1960 = EDGE_LOOP('',(#1961,#1962,#1963,#1984));+#1961 = ORIENTED_EDGE('',*,*,#1935,.T.);+#1962 = ORIENTED_EDGE('',*,*,#1649,.T.);+#1963 = ORIENTED_EDGE('',*,*,#1964,.T.);+#1964 = EDGE_CURVE('',#1627,#1243,#1965,.T.);+#1965 = SURFACE_CURVE('',#1966,(#1970,#1977),.PCURVE_S1.);+#1966 = LINE('',#1967,#1968);+#1967 = CARTESIAN_POINT('',(-5.255,4.74,0.));+#1968 = VECTOR('',#1969,1.);+#1969 = DIRECTION('',(0.,1.,0.));+#1970 = PCURVE('',#1286,#1971);+#1971 = DEFINITIONAL_REPRESENTATION('',(#1972),#1976);+#1972 = LINE('',#1973,#1974);+#1973 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#1974 = VECTOR('',#1975,1.);+#1975 = DIRECTION('',(0.,1.));+#1976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1977 = PCURVE('',#1258,#1978);+#1978 = DEFINITIONAL_REPRESENTATION('',(#1979),#1983);+#1979 = LINE('',#1980,#1981);+#1980 = CARTESIAN_POINT('',(-0.5,-0.34));+#1981 = VECTOR('',#1982,1.);+#1982 = DIRECTION('',(0.,-1.));+#1983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1984 = ORIENTED_EDGE('',*,*,#1270,.F.);+#1985 = ADVANCED_FACE('',(#1986),#1258,.T.);+#1986 = FACE_BOUND('',#1987,.F.);+#1987 = EDGE_LOOP('',(#1988,#2009,#2010,#2011));+#1988 = ORIENTED_EDGE('',*,*,#1989,.F.);+#1989 = EDGE_CURVE('',#1604,#1215,#1990,.T.);+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-5.255,4.74,0.2));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(0.,1.,0.));+#1995 = PCURVE('',#1258,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-0.7,-0.34));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(0.,-1.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = PCURVE('',#1230,#2003);+#2003 = DEFINITIONAL_REPRESENTATION('',(#2004),#2008);+#2004 = LINE('',#2005,#2006);+#2005 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#2006 = VECTOR('',#2007,1.);+#2007 = DIRECTION('',(0.,1.));+#2008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2009 = ORIENTED_EDGE('',*,*,#1626,.T.);+#2010 = ORIENTED_EDGE('',*,*,#1964,.T.);+#2011 = ORIENTED_EDGE('',*,*,#1242,.F.);+#2012 = ADVANCED_FACE('',(#2013),#1230,.T.);+#2013 = FACE_BOUND('',#2014,.F.);+#2014 = EDGE_LOOP('',(#2015,#2036,#2037,#2038));+#2015 = ORIENTED_EDGE('',*,*,#2016,.T.);+#2016 = EDGE_CURVE('',#1182,#1576,#2017,.T.);+#2017 = SURFACE_CURVE('',#2018,(#2022,#2029),.PCURVE_S1.);+#2018 = LINE('',#2019,#2020);+#2019 = CARTESIAN_POINT('',(-4.606430027578,5.26,0.2));+#2020 = VECTOR('',#2021,1.);+#2021 = DIRECTION('',(-0.,-1.,-0.));+#2022 = PCURVE('',#1230,#2023);+#2023 = DEFINITIONAL_REPRESENTATION('',(#2024),#2028);+#2024 = LINE('',#2025,#2026);+#2025 = CARTESIAN_POINT('',(0.,0.18));+#2026 = VECTOR('',#2027,1.);+#2027 = DIRECTION('',(0.,-1.));+#2028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2029 = PCURVE('',#1202,#2030);+#2030 = DEFINITIONAL_REPRESENTATION('',(#2031),#2035);+#2031 = LINE('',#2032,#2033);+#2032 = CARTESIAN_POINT('',(3.14159265359,0.18));+#2033 = VECTOR('',#2034,1.);+#2034 = DIRECTION('',(-0.,-1.));+#2035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2036 = ORIENTED_EDGE('',*,*,#1603,.T.);+#2037 = ORIENTED_EDGE('',*,*,#1989,.T.);+#2038 = ORIENTED_EDGE('',*,*,#1214,.F.);+#2039 = ADVANCED_FACE('',(#2040),#1202,.F.);+#2040 = FACE_BOUND('',#2041,.F.);+#2041 = EDGE_LOOP('',(#2042,#2043,#2044,#2065));+#2042 = ORIENTED_EDGE('',*,*,#2016,.F.);+#2043 = ORIENTED_EDGE('',*,*,#1181,.T.);+#2044 = ORIENTED_EDGE('',*,*,#2045,.T.);+#2045 = EDGE_CURVE('',#1154,#1553,#2046,.T.);+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(-4.537145669057,5.26,0.240004029399));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-0.,-1.,-0.));+#2051 = PCURVE('',#1202,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(2.094336944003,0.18));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(-0.,-1.));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#1169,#2059);+#2059 = DEFINITIONAL_REPRESENTATION('',(#2060),#2064);+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(0.,-1.));+#2064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2065 = ORIENTED_EDGE('',*,*,#1575,.F.);+#2066 = ADVANCED_FACE('',(#2067),#1169,.T.);+#2067 = FACE_BOUND('',#2068,.F.);+#2068 = EDGE_LOOP('',(#2069,#2070,#2071,#2072));+#2069 = ORIENTED_EDGE('',*,*,#1801,.F.);+#2070 = ORIENTED_EDGE('',*,*,#1552,.T.);+#2071 = ORIENTED_EDGE('',*,*,#2045,.F.);+#2072 = ORIENTED_EDGE('',*,*,#1153,.F.);+#2073 = MANIFOLD_SOLID_BREP('',#2074);+#2074 = CLOSED_SHELL('',(#2075,#2197,#2273,#2623,#2672,#2950,#2977,#3004+ ,#3031,#3058,#3085,#3112,#3139,#3166,#3193,#3220));+#2075 = ADVANCED_FACE('',(#2076),#2090,.T.);+#2076 = FACE_BOUND('',#2077,.T.);+#2077 = EDGE_LOOP('',(#2078,#2113,#2142,#2170));+#2078 = ORIENTED_EDGE('',*,*,#2079,.F.);+#2079 = EDGE_CURVE('',#2080,#2082,#2084,.T.);+#2080 = VERTEX_POINT('',#2081);+#2081 = CARTESIAN_POINT('',(-3.4975,3.63,1.3));+#2082 = VERTEX_POINT('',#2083);+#2083 = CARTESIAN_POINT('',(-3.4975,3.99,1.3));+#2084 = SURFACE_CURVE('',#2085,(#2089,#2101),.PCURVE_S1.);+#2085 = LINE('',#2086,#2087);+#2086 = CARTESIAN_POINT('',(-3.4975,3.63,1.3));+#2087 = VECTOR('',#2088,1.);+#2088 = DIRECTION('',(0.,1.,0.));+#2089 = PCURVE('',#2090,#2095);+#2090 = CYLINDRICAL_SURFACE('',#2091,0.1);+#2091 = AXIS2_PLACEMENT_3D('',#2092,#2093,#2094);+#2092 = CARTESIAN_POINT('',(-3.4975,3.81,1.2));+#2093 = DIRECTION('',(0.,1.,0.));+#2094 = DIRECTION('',(-1.,-0.,-0.));+#2095 = DEFINITIONAL_REPRESENTATION('',(#2096),#2100);+#2096 = LINE('',#2097,#2098);+#2097 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#2098 = VECTOR('',#2099,1.);+#2099 = DIRECTION('',(-0.,1.));+#2100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2101 = PCURVE('',#2102,#2107);+#2102 = PLANE('',#2103);+#2103 = AXIS2_PLACEMENT_3D('',#2104,#2105,#2106);+#2104 = CARTESIAN_POINT('',(-3.4975,3.81,1.3));+#2105 = DIRECTION('',(0.,0.,1.));+#2106 = DIRECTION('',(1.,0.,0.));+#2107 = DEFINITIONAL_REPRESENTATION('',(#2108),#2112);+#2108 = LINE('',#2109,#2110);+#2109 = CARTESIAN_POINT('',(0.,-0.18));+#2110 = VECTOR('',#2111,1.);+#2111 = DIRECTION('',(0.,1.));+#2112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2113 = ORIENTED_EDGE('',*,*,#2114,.T.);+#2114 = EDGE_CURVE('',#2080,#2115,#2117,.T.);+#2115 = VERTEX_POINT('',#2116);+#2116 = CARTESIAN_POINT('',(-3.4475,3.63,1.286602540378));+#2117 = SURFACE_CURVE('',#2118,(#2123,#2130),.PCURVE_S1.);+#2118 = CIRCLE('',#2119,0.1);+#2119 = AXIS2_PLACEMENT_3D('',#2120,#2121,#2122);+#2120 = CARTESIAN_POINT('',(-3.4975,3.63,1.2));+#2121 = DIRECTION('',(0.,1.,-0.));+#2122 = DIRECTION('',(-1.,0.,0.));+#2123 = PCURVE('',#2090,#2124);+#2124 = DEFINITIONAL_REPRESENTATION('',(#2125),#2129);+#2125 = LINE('',#2126,#2127);+#2126 = CARTESIAN_POINT('',(0.,-0.18));+#2127 = VECTOR('',#2128,1.);+#2128 = DIRECTION('',(1.,0.));+#2129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2130 = PCURVE('',#2131,#2136);+#2131 = PLANE('',#2132);+#2132 = AXIS2_PLACEMENT_3D('',#2133,#2134,#2135);+#2133 = CARTESIAN_POINT('',(-4.408401242914,3.63,0.524461625949));+#2134 = DIRECTION('',(0.,1.,0.));+#2135 = DIRECTION('',(0.,0.,-1.));+#2136 = DEFINITIONAL_REPRESENTATION('',(#2137),#2141);+#2137 = CIRCLE('',#2138,0.1);+#2138 = AXIS2_PLACEMENT_2D('',#2139,#2140);+#2139 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#2140 = DIRECTION('',(0.,1.));+#2141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2142 = ORIENTED_EDGE('',*,*,#2143,.T.);+#2143 = EDGE_CURVE('',#2115,#2144,#2146,.T.);+#2144 = VERTEX_POINT('',#2145);+#2145 = CARTESIAN_POINT('',(-3.4475,3.99,1.286602540378));+#2146 = SURFACE_CURVE('',#2147,(#2151,#2158),.PCURVE_S1.);+#2147 = LINE('',#2148,#2149);+#2148 = CARTESIAN_POINT('',(-3.4475,3.81,1.286602540378));+#2149 = VECTOR('',#2150,1.);+#2150 = DIRECTION('',(0.,1.,0.));+#2151 = PCURVE('',#2090,#2152);+#2152 = DEFINITIONAL_REPRESENTATION('',(#2153),#2157);+#2153 = LINE('',#2154,#2155);+#2154 = CARTESIAN_POINT('',(2.094395102393,0.));+#2155 = VECTOR('',#2156,1.);+#2156 = DIRECTION('',(0.,1.));+#2157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2158 = PCURVE('',#2159,#2164);+#2159 = PLANE('',#2160);+#2160 = AXIS2_PLACEMENT_3D('',#2161,#2162,#2163);+#2161 = CARTESIAN_POINT('',(-3.4475,3.13,-0.5));+#2162 = DIRECTION('',(-1.,0.,0.));+#2163 = DIRECTION('',(0.,0.,-1.));+#2164 = DEFINITIONAL_REPRESENTATION('',(#2165),#2169);+#2165 = LINE('',#2166,#2167);+#2166 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#2167 = VECTOR('',#2168,1.);+#2168 = DIRECTION('',(0.,-1.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = ORIENTED_EDGE('',*,*,#2171,.F.);+#2171 = EDGE_CURVE('',#2082,#2144,#2172,.T.);+#2172 = SURFACE_CURVE('',#2173,(#2178,#2185),.PCURVE_S1.);+#2173 = CIRCLE('',#2174,0.1);+#2174 = AXIS2_PLACEMENT_3D('',#2175,#2176,#2177);+#2175 = CARTESIAN_POINT('',(-3.4975,3.99,1.2));+#2176 = DIRECTION('',(0.,1.,-0.));+#2177 = DIRECTION('',(-1.,0.,0.));+#2178 = PCURVE('',#2090,#2179);+#2179 = DEFINITIONAL_REPRESENTATION('',(#2180),#2184);+#2180 = LINE('',#2181,#2182);+#2181 = CARTESIAN_POINT('',(-0.,0.18));+#2182 = VECTOR('',#2183,1.);+#2183 = DIRECTION('',(1.,-0.));+#2184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2185 = PCURVE('',#2186,#2191);+#2186 = PLANE('',#2187);+#2187 = AXIS2_PLACEMENT_3D('',#2188,#2189,#2190);+#2188 = CARTESIAN_POINT('',(-4.408401242914,3.99,0.524461625949));+#2189 = DIRECTION('',(0.,1.,0.));+#2190 = DIRECTION('',(0.,0.,-1.));+#2191 = DEFINITIONAL_REPRESENTATION('',(#2192),#2196);+#2192 = CIRCLE('',#2193,0.1);+#2193 = AXIS2_PLACEMENT_2D('',#2194,#2195);+#2194 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#2195 = DIRECTION('',(0.,1.));+#2196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2197 = ADVANCED_FACE('',(#2198),#2102,.T.);+#2198 = FACE_BOUND('',#2199,.F.);+#2199 = EDGE_LOOP('',(#2200,#2201,#2224,#2252));+#2200 = ORIENTED_EDGE('',*,*,#2079,.F.);+#2201 = ORIENTED_EDGE('',*,*,#2202,.T.);+#2202 = EDGE_CURVE('',#2080,#2203,#2205,.T.);+#2203 = VERTEX_POINT('',#2204);+#2204 = CARTESIAN_POINT('',(-3.763569972422,3.63,1.3));+#2205 = SURFACE_CURVE('',#2206,(#2210,#2217),.PCURVE_S1.);+#2206 = LINE('',#2207,#2208);+#2207 = CARTESIAN_POINT('',(-3.4975,3.63,1.3));+#2208 = VECTOR('',#2209,1.);+#2209 = DIRECTION('',(-1.,-0.,-0.));+#2210 = PCURVE('',#2102,#2211);+#2211 = DEFINITIONAL_REPRESENTATION('',(#2212),#2216);+#2212 = LINE('',#2213,#2214);+#2213 = CARTESIAN_POINT('',(0.,-0.18));+#2214 = VECTOR('',#2215,1.);+#2215 = DIRECTION('',(-1.,0.));+#2216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2217 = PCURVE('',#2131,#2218);+#2218 = DEFINITIONAL_REPRESENTATION('',(#2219),#2223);+#2219 = LINE('',#2220,#2221);+#2220 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#2221 = VECTOR('',#2222,1.);+#2222 = DIRECTION('',(-0.,1.));+#2223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2224 = ORIENTED_EDGE('',*,*,#2225,.T.);+#2225 = EDGE_CURVE('',#2203,#2226,#2228,.T.);+#2226 = VERTEX_POINT('',#2227);+#2227 = CARTESIAN_POINT('',(-3.763569972422,3.99,1.3));+#2228 = SURFACE_CURVE('',#2229,(#2233,#2240),.PCURVE_S1.);+#2229 = LINE('',#2230,#2231);+#2230 = CARTESIAN_POINT('',(-3.763569972422,3.63,1.3));+#2231 = VECTOR('',#2232,1.);+#2232 = DIRECTION('',(0.,1.,0.));+#2233 = PCURVE('',#2102,#2234);+#2234 = DEFINITIONAL_REPRESENTATION('',(#2235),#2239);+#2235 = LINE('',#2236,#2237);+#2236 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#2237 = VECTOR('',#2238,1.);+#2238 = DIRECTION('',(0.,1.));+#2239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2240 = PCURVE('',#2241,#2246);+#2241 = CYLINDRICAL_SURFACE('',#2242,0.28);+#2242 = AXIS2_PLACEMENT_3D('',#2243,#2244,#2245);+#2243 = CARTESIAN_POINT('',(-3.763569972422,3.81,1.02));+#2244 = DIRECTION('',(0.,1.,0.));+#2245 = DIRECTION('',(0.,0.,1.));+#2246 = DEFINITIONAL_REPRESENTATION('',(#2247),#2251);+#2247 = LINE('',#2248,#2249);+#2248 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#2249 = VECTOR('',#2250,1.);+#2250 = DIRECTION('',(0.,1.));+#2251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2252 = ORIENTED_EDGE('',*,*,#2253,.F.);+#2253 = EDGE_CURVE('',#2082,#2226,#2254,.T.);+#2254 = SURFACE_CURVE('',#2255,(#2259,#2266),.PCURVE_S1.);+#2255 = LINE('',#2256,#2257);+#2256 = CARTESIAN_POINT('',(-3.4975,3.99,1.3));+#2257 = VECTOR('',#2258,1.);+#2258 = DIRECTION('',(-1.,-0.,-0.));+#2259 = PCURVE('',#2102,#2260);+#2260 = DEFINITIONAL_REPRESENTATION('',(#2261),#2265);+#2261 = LINE('',#2262,#2263);+#2262 = CARTESIAN_POINT('',(0.,0.18));+#2263 = VECTOR('',#2264,1.);+#2264 = DIRECTION('',(-1.,0.));+#2265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2266 = PCURVE('',#2186,#2267);+#2267 = DEFINITIONAL_REPRESENTATION('',(#2268),#2272);+#2268 = LINE('',#2269,#2270);+#2269 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#2270 = VECTOR('',#2271,1.);+#2271 = DIRECTION('',(-0.,1.));+#2272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2273 = ADVANCED_FACE('',(#2274),#2186,.T.);+#2274 = FACE_BOUND('',#2275,.F.);+#2275 = EDGE_LOOP('',(#2276,#2277,#2278,#2306,#2334,#2367,#2395,#2423,+ #2451,#2484,#2512,#2545,#2573,#2602));+#2276 = ORIENTED_EDGE('',*,*,#2171,.F.);+#2277 = ORIENTED_EDGE('',*,*,#2253,.T.);+#2278 = ORIENTED_EDGE('',*,*,#2279,.T.);+#2279 = EDGE_CURVE('',#2226,#2280,#2282,.T.);+#2280 = VERTEX_POINT('',#2281);+#2281 = CARTESIAN_POINT('',(-4.006065227246,3.99,1.159985897103));+#2282 = SURFACE_CURVE('',#2283,(#2288,#2299),.PCURVE_S1.);+#2283 = CIRCLE('',#2284,0.28);+#2284 = AXIS2_PLACEMENT_3D('',#2285,#2286,#2287);+#2285 = CARTESIAN_POINT('',(-3.763569972422,3.99,1.02));+#2286 = DIRECTION('',(0.,-1.,0.));+#2287 = DIRECTION('',(0.,0.,1.));+#2288 = PCURVE('',#2186,#2289);+#2289 = DEFINITIONAL_REPRESENTATION('',(#2290),#2298);+#2290 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2291,#2292,#2293,#2294,+#2295,#2296,#2297),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2291 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#2292 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#2293 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#2294 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#2295 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#2296 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#2297 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#2298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2299 = PCURVE('',#2241,#2300);+#2300 = DEFINITIONAL_REPRESENTATION('',(#2301),#2305);+#2301 = LINE('',#2302,#2303);+#2302 = CARTESIAN_POINT('',(6.28318530718,0.18));+#2303 = VECTOR('',#2304,1.);+#2304 = DIRECTION('',(-1.,-0.));+#2305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2306 = ORIENTED_EDGE('',*,*,#2307,.T.);+#2307 = EDGE_CURVE('',#2280,#2308,#2310,.T.);+#2308 = VERTEX_POINT('',#2309);+#2309 = CARTESIAN_POINT('',(-4.537145669057,3.99,0.240004029399));+#2310 = SURFACE_CURVE('',#2311,(#2315,#2322),.PCURVE_S1.);+#2311 = LINE('',#2312,#2313);+#2312 = CARTESIAN_POINT('',(-3.954105448151,3.99,1.249994963251));+#2313 = VECTOR('',#2314,1.);+#2314 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#2315 = PCURVE('',#2186,#2316);+#2316 = DEFINITIONAL_REPRESENTATION('',(#2317),#2321);+#2317 = LINE('',#2318,#2319);+#2318 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#2319 = VECTOR('',#2320,1.);+#2320 = DIRECTION('',(0.866054481515,0.499949632511));+#2321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2322 = PCURVE('',#2323,#2328);+#2323 = PLANE('',#2324);+#2324 = AXIS2_PLACEMENT_3D('',#2325,#2326,#2327);+#2325 = CARTESIAN_POINT('',(-4.006065227246,3.81,1.159985897103));+#2326 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#2327 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#2328 = DEFINITIONAL_REPRESENTATION('',(#2329),#2333);+#2329 = LINE('',#2330,#2331);+#2330 = CARTESIAN_POINT('',(0.103930027578,0.18));+#2331 = VECTOR('',#2332,1.);+#2332 = DIRECTION('',(-1.,0.));+#2333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2334 = ORIENTED_EDGE('',*,*,#2335,.F.);+#2335 = EDGE_CURVE('',#2336,#2308,#2338,.T.);+#2336 = VERTEX_POINT('',#2337);+#2337 = CARTESIAN_POINT('',(-4.606430027578,3.99,0.2));+#2338 = SURFACE_CURVE('',#2339,(#2344,#2355),.PCURVE_S1.);+#2339 = CIRCLE('',#2340,8.E-02);+#2340 = AXIS2_PLACEMENT_3D('',#2341,#2342,#2343);+#2341 = CARTESIAN_POINT('',(-4.606430027578,3.99,0.28));+#2342 = DIRECTION('',(0.,-1.,0.));+#2343 = DIRECTION('',(0.,0.,1.));+#2344 = PCURVE('',#2186,#2345);+#2345 = DEFINITIONAL_REPRESENTATION('',(#2346),#2354);+#2346 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2347,#2348,#2349,#2350,+#2351,#2352,#2353),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2347 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#2348 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#2349 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#2350 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#2351 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#2352 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#2353 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#2354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2355 = PCURVE('',#2356,#2361);+#2356 = CYLINDRICAL_SURFACE('',#2357,8.E-02);+#2357 = AXIS2_PLACEMENT_3D('',#2358,#2359,#2360);+#2358 = CARTESIAN_POINT('',(-4.606430027578,3.81,0.28));+#2359 = DIRECTION('',(0.,1.,0.));+#2360 = DIRECTION('',(0.,0.,1.));+#2361 = DEFINITIONAL_REPRESENTATION('',(#2362),#2366);+#2362 = LINE('',#2363,#2364);+#2363 = CARTESIAN_POINT('',(6.28318530718,0.18));+#2364 = VECTOR('',#2365,1.);+#2365 = DIRECTION('',(-1.,-0.));+#2366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2367 = ORIENTED_EDGE('',*,*,#2368,.T.);+#2368 = EDGE_CURVE('',#2336,#2369,#2371,.T.);+#2369 = VERTEX_POINT('',#2370);+#2370 = CARTESIAN_POINT('',(-5.255,3.99,0.2));+#2371 = SURFACE_CURVE('',#2372,(#2376,#2383),.PCURVE_S1.);+#2372 = LINE('',#2373,#2374);+#2373 = CARTESIAN_POINT('',(-4.5025,3.99,0.2));+#2374 = VECTOR('',#2375,1.);+#2375 = DIRECTION('',(-1.,-0.,-0.));+#2376 = PCURVE('',#2186,#2377);+#2377 = DEFINITIONAL_REPRESENTATION('',(#2378),#2382);+#2378 = LINE('',#2379,#2380);+#2379 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#2380 = VECTOR('',#2381,1.);+#2381 = DIRECTION('',(-0.,1.));+#2382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2383 = PCURVE('',#2384,#2389);+#2384 = PLANE('',#2385);+#2385 = AXIS2_PLACEMENT_3D('',#2386,#2387,#2388);+#2386 = CARTESIAN_POINT('',(-4.606430027578,3.81,0.2));+#2387 = DIRECTION('',(0.,0.,1.));+#2388 = DIRECTION('',(1.,0.,0.));+#2389 = DEFINITIONAL_REPRESENTATION('',(#2390),#2394);+#2390 = LINE('',#2391,#2392);+#2391 = CARTESIAN_POINT('',(0.103930027578,0.18));+#2392 = VECTOR('',#2393,1.);+#2393 = DIRECTION('',(-1.,0.));+#2394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2395 = ORIENTED_EDGE('',*,*,#2396,.T.);+#2396 = EDGE_CURVE('',#2369,#2397,#2399,.T.);+#2397 = VERTEX_POINT('',#2398);+#2398 = CARTESIAN_POINT('',(-5.255,3.99,0.));+#2399 = SURFACE_CURVE('',#2400,(#2404,#2411),.PCURVE_S1.);+#2400 = LINE('',#2401,#2402);+#2401 = CARTESIAN_POINT('',(-5.255,3.99,1.223081297441E-02));+#2402 = VECTOR('',#2403,1.);+#2403 = DIRECTION('',(-0.,-0.,-1.));+#2404 = PCURVE('',#2186,#2405);+#2405 = DEFINITIONAL_REPRESENTATION('',(#2406),#2410);+#2406 = LINE('',#2407,#2408);+#2407 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#2408 = VECTOR('',#2409,1.);+#2409 = DIRECTION('',(1.,0.));+#2410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2411 = PCURVE('',#2412,#2417);+#2412 = PLANE('',#2413);+#2413 = AXIS2_PLACEMENT_3D('',#2414,#2415,#2416);+#2414 = CARTESIAN_POINT('',(-5.255,3.13,-0.5));+#2415 = DIRECTION('',(-1.,0.,0.));+#2416 = DIRECTION('',(0.,0.,-1.));+#2417 = DEFINITIONAL_REPRESENTATION('',(#2418),#2422);+#2418 = LINE('',#2419,#2420);+#2419 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#2420 = VECTOR('',#2421,1.);+#2421 = DIRECTION('',(1.,0.));+#2422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2423 = ORIENTED_EDGE('',*,*,#2424,.F.);+#2424 = EDGE_CURVE('',#2425,#2397,#2427,.T.);+#2425 = VERTEX_POINT('',#2426);+#2426 = CARTESIAN_POINT('',(-4.606430027578,3.99,-5.551115123126E-17));+#2427 = SURFACE_CURVE('',#2428,(#2432,#2439),.PCURVE_S1.);+#2428 = LINE('',#2429,#2430);+#2429 = CARTESIAN_POINT('',(-4.5025,3.99,0.));+#2430 = VECTOR('',#2431,1.);+#2431 = DIRECTION('',(-1.,-0.,-0.));+#2432 = PCURVE('',#2186,#2433);+#2433 = DEFINITIONAL_REPRESENTATION('',(#2434),#2438);+#2434 = LINE('',#2435,#2436);+#2435 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#2436 = VECTOR('',#2437,1.);+#2437 = DIRECTION('',(-0.,1.));+#2438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2439 = PCURVE('',#2440,#2445);+#2440 = PLANE('',#2441);+#2441 = AXIS2_PLACEMENT_3D('',#2442,#2443,#2444);+#2442 = CARTESIAN_POINT('',(-4.606430027578,3.81,0.));+#2443 = DIRECTION('',(0.,0.,1.));+#2444 = DIRECTION('',(1.,0.,0.));+#2445 = DEFINITIONAL_REPRESENTATION('',(#2446),#2450);+#2446 = LINE('',#2447,#2448);+#2447 = CARTESIAN_POINT('',(0.103930027578,0.18));+#2448 = VECTOR('',#2449,1.);+#2449 = DIRECTION('',(-1.,0.));+#2450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2451 = ORIENTED_EDGE('',*,*,#2452,.T.);+#2452 = EDGE_CURVE('',#2425,#2453,#2455,.T.);+#2453 = VERTEX_POINT('',#2454);+#2454 = CARTESIAN_POINT('',(-4.363934772754,3.99,0.140014102897));+#2455 = SURFACE_CURVE('',#2456,(#2461,#2472),.PCURVE_S1.);+#2456 = CIRCLE('',#2457,0.28);+#2457 = AXIS2_PLACEMENT_3D('',#2458,#2459,#2460);+#2458 = CARTESIAN_POINT('',(-4.606430027578,3.99,0.28));+#2459 = DIRECTION('',(0.,-1.,0.));+#2460 = DIRECTION('',(0.,0.,1.));+#2461 = PCURVE('',#2186,#2462);+#2462 = DEFINITIONAL_REPRESENTATION('',(#2463),#2471);+#2463 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2464,#2465,#2466,#2467,+#2468,#2469,#2470),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2464 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#2465 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#2466 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#2467 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#2468 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#2469 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#2470 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#2471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2472 = PCURVE('',#2473,#2478);+#2473 = CYLINDRICAL_SURFACE('',#2474,0.28);+#2474 = AXIS2_PLACEMENT_3D('',#2475,#2476,#2477);+#2475 = CARTESIAN_POINT('',(-4.606430027578,3.81,0.28));+#2476 = DIRECTION('',(0.,1.,0.));+#2477 = DIRECTION('',(0.,0.,1.));+#2478 = DEFINITIONAL_REPRESENTATION('',(#2479),#2483);+#2479 = LINE('',#2480,#2481);+#2480 = CARTESIAN_POINT('',(6.28318530718,0.18));+#2481 = VECTOR('',#2482,1.);+#2482 = DIRECTION('',(-1.,-0.));+#2483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2484 = ORIENTED_EDGE('',*,*,#2485,.F.);+#2485 = EDGE_CURVE('',#2486,#2453,#2488,.T.);+#2486 = VERTEX_POINT('',#2487);+#2487 = CARTESIAN_POINT('',(-3.832854330943,3.99,1.059995970601));+#2488 = SURFACE_CURVE('',#2489,(#2493,#2500),.PCURVE_S1.);+#2489 = LINE('',#2490,#2491);+#2490 = CARTESIAN_POINT('',(-3.780894551849,3.99,1.150005036749));+#2491 = VECTOR('',#2492,1.);+#2492 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#2493 = PCURVE('',#2186,#2494);+#2494 = DEFINITIONAL_REPRESENTATION('',(#2495),#2499);+#2495 = LINE('',#2496,#2497);+#2496 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#2497 = VECTOR('',#2498,1.);+#2498 = DIRECTION('',(0.866054481515,0.499949632511));+#2499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2500 = PCURVE('',#2501,#2506);+#2501 = PLANE('',#2502);+#2502 = AXIS2_PLACEMENT_3D('',#2503,#2504,#2505);+#2503 = CARTESIAN_POINT('',(-3.832854330943,3.81,1.059995970601));+#2504 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#2505 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#2506 = DEFINITIONAL_REPRESENTATION('',(#2507),#2511);+#2507 = LINE('',#2508,#2509);+#2508 = CARTESIAN_POINT('',(0.103930027578,0.18));+#2509 = VECTOR('',#2510,1.);+#2510 = DIRECTION('',(-1.,0.));+#2511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2512 = ORIENTED_EDGE('',*,*,#2513,.F.);+#2513 = EDGE_CURVE('',#2514,#2486,#2516,.T.);+#2514 = VERTEX_POINT('',#2515);+#2515 = CARTESIAN_POINT('',(-3.763569972422,3.99,1.1));+#2516 = SURFACE_CURVE('',#2517,(#2522,#2533),.PCURVE_S1.);+#2517 = CIRCLE('',#2518,8.E-02);+#2518 = AXIS2_PLACEMENT_3D('',#2519,#2520,#2521);+#2519 = CARTESIAN_POINT('',(-3.763569972422,3.99,1.02));+#2520 = DIRECTION('',(0.,-1.,0.));+#2521 = DIRECTION('',(0.,0.,1.));+#2522 = PCURVE('',#2186,#2523);+#2523 = DEFINITIONAL_REPRESENTATION('',(#2524),#2532);+#2524 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2525,#2526,#2527,#2528,+#2529,#2530,#2531),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2525 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#2526 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#2527 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#2528 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#2529 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#2530 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#2531 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#2532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2533 = PCURVE('',#2534,#2539);+#2534 = CYLINDRICAL_SURFACE('',#2535,8.E-02);+#2535 = AXIS2_PLACEMENT_3D('',#2536,#2537,#2538);+#2536 = CARTESIAN_POINT('',(-3.763569972422,3.81,1.02));+#2537 = DIRECTION('',(0.,1.,0.));+#2538 = DIRECTION('',(0.,0.,1.));+#2539 = DEFINITIONAL_REPRESENTATION('',(#2540),#2544);+#2540 = LINE('',#2541,#2542);+#2541 = CARTESIAN_POINT('',(6.28318530718,0.18));+#2542 = VECTOR('',#2543,1.);+#2543 = DIRECTION('',(-1.,-0.));+#2544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2545 = ORIENTED_EDGE('',*,*,#2546,.F.);+#2546 = EDGE_CURVE('',#2547,#2514,#2549,.T.);+#2547 = VERTEX_POINT('',#2548);+#2548 = CARTESIAN_POINT('',(-3.4975,3.99,1.1));+#2549 = SURFACE_CURVE('',#2550,(#2554,#2561),.PCURVE_S1.);+#2550 = LINE('',#2551,#2552);+#2551 = CARTESIAN_POINT('',(-3.4975,3.99,1.1));+#2552 = VECTOR('',#2553,1.);+#2553 = DIRECTION('',(-1.,-0.,-0.));+#2554 = PCURVE('',#2186,#2555);+#2555 = DEFINITIONAL_REPRESENTATION('',(#2556),#2560);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(-0.,1.));+#2560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2561 = PCURVE('',#2562,#2567);+#2562 = PLANE('',#2563);+#2563 = AXIS2_PLACEMENT_3D('',#2564,#2565,#2566);+#2564 = CARTESIAN_POINT('',(-3.4975,3.81,1.1));+#2565 = DIRECTION('',(0.,0.,1.));+#2566 = DIRECTION('',(1.,0.,0.));+#2567 = DEFINITIONAL_REPRESENTATION('',(#2568),#2572);+#2568 = LINE('',#2569,#2570);+#2569 = CARTESIAN_POINT('',(0.,0.18));+#2570 = VECTOR('',#2571,1.);+#2571 = DIRECTION('',(-1.,0.));+#2572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2573 = ORIENTED_EDGE('',*,*,#2574,.F.);+#2574 = EDGE_CURVE('',#2575,#2547,#2577,.T.);+#2575 = VERTEX_POINT('',#2576);+#2576 = CARTESIAN_POINT('',(-3.4475,3.99,1.113397459622));+#2577 = SURFACE_CURVE('',#2578,(#2583,#2590),.PCURVE_S1.);+#2578 = CIRCLE('',#2579,0.1);+#2579 = AXIS2_PLACEMENT_3D('',#2580,#2581,#2582);+#2580 = CARTESIAN_POINT('',(-3.4975,3.99,1.2));+#2581 = DIRECTION('',(0.,1.,-0.));+#2582 = DIRECTION('',(-1.,0.,0.));+#2583 = PCURVE('',#2186,#2584);+#2584 = DEFINITIONAL_REPRESENTATION('',(#2585),#2589);+#2585 = CIRCLE('',#2586,0.1);+#2586 = AXIS2_PLACEMENT_2D('',#2587,#2588);+#2587 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#2588 = DIRECTION('',(0.,1.));+#2589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2590 = PCURVE('',#2591,#2596);+#2591 = CYLINDRICAL_SURFACE('',#2592,0.1);+#2592 = AXIS2_PLACEMENT_3D('',#2593,#2594,#2595);+#2593 = CARTESIAN_POINT('',(-3.4975,3.81,1.2));+#2594 = DIRECTION('',(0.,1.,0.));+#2595 = DIRECTION('',(-1.,-0.,-0.));+#2596 = DEFINITIONAL_REPRESENTATION('',(#2597),#2601);+#2597 = LINE('',#2598,#2599);+#2598 = CARTESIAN_POINT('',(-0.,0.18));+#2599 = VECTOR('',#2600,1.);+#2600 = DIRECTION('',(1.,-0.));+#2601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2602 = ORIENTED_EDGE('',*,*,#2603,.F.);+#2603 = EDGE_CURVE('',#2144,#2575,#2604,.T.);+#2604 = SURFACE_CURVE('',#2605,(#2609,#2616),.PCURVE_S1.);+#2605 = LINE('',#2606,#2607);+#2606 = CARTESIAN_POINT('',(-3.4475,3.99,1.223081297441E-02));+#2607 = VECTOR('',#2608,1.);+#2608 = DIRECTION('',(-0.,-0.,-1.));+#2609 = PCURVE('',#2186,#2610);+#2610 = DEFINITIONAL_REPRESENTATION('',(#2611),#2615);+#2611 = LINE('',#2612,#2613);+#2612 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#2613 = VECTOR('',#2614,1.);+#2614 = DIRECTION('',(1.,0.));+#2615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2616 = PCURVE('',#2159,#2617);+#2617 = DEFINITIONAL_REPRESENTATION('',(#2618),#2622);+#2618 = LINE('',#2619,#2620);+#2619 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#2620 = VECTOR('',#2621,1.);+#2621 = DIRECTION('',(1.,0.));+#2622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2623 = ADVANCED_FACE('',(#2624),#2159,.F.);+#2624 = FACE_BOUND('',#2625,.T.);+#2625 = EDGE_LOOP('',(#2626,#2627,#2650,#2671));+#2626 = ORIENTED_EDGE('',*,*,#2143,.F.);+#2627 = ORIENTED_EDGE('',*,*,#2628,.T.);+#2628 = EDGE_CURVE('',#2115,#2629,#2631,.T.);+#2629 = VERTEX_POINT('',#2630);+#2630 = CARTESIAN_POINT('',(-3.4475,3.63,1.113397459622));+#2631 = SURFACE_CURVE('',#2632,(#2636,#2643),.PCURVE_S1.);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(-3.4475,3.63,1.223081297441E-02));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(-0.,-0.,-1.));+#2636 = PCURVE('',#2159,#2637);+#2637 = DEFINITIONAL_REPRESENTATION('',(#2638),#2642);+#2638 = LINE('',#2639,#2640);+#2639 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#2640 = VECTOR('',#2641,1.);+#2641 = DIRECTION('',(1.,0.));+#2642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2643 = PCURVE('',#2131,#2644);+#2644 = DEFINITIONAL_REPRESENTATION('',(#2645),#2649);+#2645 = LINE('',#2646,#2647);+#2646 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#2647 = VECTOR('',#2648,1.);+#2648 = DIRECTION('',(1.,0.));+#2649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2650 = ORIENTED_EDGE('',*,*,#2651,.T.);+#2651 = EDGE_CURVE('',#2629,#2575,#2652,.T.);+#2652 = SURFACE_CURVE('',#2653,(#2657,#2664),.PCURVE_S1.);+#2653 = LINE('',#2654,#2655);+#2654 = CARTESIAN_POINT('',(-3.4475,3.81,1.113397459622));+#2655 = VECTOR('',#2656,1.);+#2656 = DIRECTION('',(0.,1.,0.));+#2657 = PCURVE('',#2159,#2658);+#2658 = DEFINITIONAL_REPRESENTATION('',(#2659),#2663);+#2659 = LINE('',#2660,#2661);+#2660 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#2661 = VECTOR('',#2662,1.);+#2662 = DIRECTION('',(0.,-1.));+#2663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2664 = PCURVE('',#2591,#2665);+#2665 = DEFINITIONAL_REPRESENTATION('',(#2666),#2670);+#2666 = LINE('',#2667,#2668);+#2667 = CARTESIAN_POINT('',(4.188790204786,0.));+#2668 = VECTOR('',#2669,1.);+#2669 = DIRECTION('',(0.,1.));+#2670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2671 = ORIENTED_EDGE('',*,*,#2603,.F.);+#2672 = ADVANCED_FACE('',(#2673),#2131,.F.);+#2673 = FACE_BOUND('',#2674,.T.);+#2674 = EDGE_LOOP('',(#2675,#2676,#2677,#2705,#2728,#2756,#2779,#2802,+ #2825,#2853,#2876,#2904,#2927,#2949));+#2675 = ORIENTED_EDGE('',*,*,#2114,.F.);+#2676 = ORIENTED_EDGE('',*,*,#2202,.T.);+#2677 = ORIENTED_EDGE('',*,*,#2678,.T.);+#2678 = EDGE_CURVE('',#2203,#2679,#2681,.T.);+#2679 = VERTEX_POINT('',#2680);+#2680 = CARTESIAN_POINT('',(-4.006065227246,3.63,1.159985897103));+#2681 = SURFACE_CURVE('',#2682,(#2687,#2698),.PCURVE_S1.);+#2682 = CIRCLE('',#2683,0.28);+#2683 = AXIS2_PLACEMENT_3D('',#2684,#2685,#2686);+#2684 = CARTESIAN_POINT('',(-3.763569972422,3.63,1.02));+#2685 = DIRECTION('',(0.,-1.,0.));+#2686 = DIRECTION('',(0.,0.,1.));+#2687 = PCURVE('',#2131,#2688);+#2688 = DEFINITIONAL_REPRESENTATION('',(#2689),#2697);+#2689 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2690,#2691,#2692,#2693,+#2694,#2695,#2696),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2690 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#2691 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#2692 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#2693 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#2694 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#2695 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#2696 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#2697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2698 = PCURVE('',#2241,#2699);+#2699 = DEFINITIONAL_REPRESENTATION('',(#2700),#2704);+#2700 = LINE('',#2701,#2702);+#2701 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#2702 = VECTOR('',#2703,1.);+#2703 = DIRECTION('',(-1.,0.));+#2704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2705 = ORIENTED_EDGE('',*,*,#2706,.T.);+#2706 = EDGE_CURVE('',#2679,#2707,#2709,.T.);+#2707 = VERTEX_POINT('',#2708);+#2708 = CARTESIAN_POINT('',(-4.537145669057,3.63,0.240004029399));+#2709 = SURFACE_CURVE('',#2710,(#2714,#2721),.PCURVE_S1.);+#2710 = LINE('',#2711,#2712);+#2711 = CARTESIAN_POINT('',(-3.954105448151,3.63,1.249994963251));+#2712 = VECTOR('',#2713,1.);+#2713 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#2714 = PCURVE('',#2131,#2715);+#2715 = DEFINITIONAL_REPRESENTATION('',(#2716),#2720);+#2716 = LINE('',#2717,#2718);+#2717 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#2718 = VECTOR('',#2719,1.);+#2719 = DIRECTION('',(0.866054481515,0.499949632511));+#2720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2721 = PCURVE('',#2323,#2722);+#2722 = DEFINITIONAL_REPRESENTATION('',(#2723),#2727);+#2723 = LINE('',#2724,#2725);+#2724 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#2725 = VECTOR('',#2726,1.);+#2726 = DIRECTION('',(-1.,0.));+#2727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2728 = ORIENTED_EDGE('',*,*,#2729,.F.);+#2729 = EDGE_CURVE('',#2730,#2707,#2732,.T.);+#2730 = VERTEX_POINT('',#2731);+#2731 = CARTESIAN_POINT('',(-4.606430027578,3.63,0.2));+#2732 = SURFACE_CURVE('',#2733,(#2738,#2749),.PCURVE_S1.);+#2733 = CIRCLE('',#2734,8.E-02);+#2734 = AXIS2_PLACEMENT_3D('',#2735,#2736,#2737);+#2735 = CARTESIAN_POINT('',(-4.606430027578,3.63,0.28));+#2736 = DIRECTION('',(0.,-1.,0.));+#2737 = DIRECTION('',(0.,0.,1.));+#2738 = PCURVE('',#2131,#2739);+#2739 = DEFINITIONAL_REPRESENTATION('',(#2740),#2748);+#2740 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2741,#2742,#2743,#2744,+#2745,#2746,#2747),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2741 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#2742 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#2743 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#2744 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#2745 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#2746 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#2747 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#2748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2749 = PCURVE('',#2356,#2750);+#2750 = DEFINITIONAL_REPRESENTATION('',(#2751),#2755);+#2751 = LINE('',#2752,#2753);+#2752 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#2753 = VECTOR('',#2754,1.);+#2754 = DIRECTION('',(-1.,0.));+#2755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2756 = ORIENTED_EDGE('',*,*,#2757,.T.);+#2757 = EDGE_CURVE('',#2730,#2758,#2760,.T.);+#2758 = VERTEX_POINT('',#2759);+#2759 = CARTESIAN_POINT('',(-5.255,3.63,0.2));+#2760 = SURFACE_CURVE('',#2761,(#2765,#2772),.PCURVE_S1.);+#2761 = LINE('',#2762,#2763);+#2762 = CARTESIAN_POINT('',(-4.5025,3.63,0.2));+#2763 = VECTOR('',#2764,1.);+#2764 = DIRECTION('',(-1.,-0.,-0.));+#2765 = PCURVE('',#2131,#2766);+#2766 = DEFINITIONAL_REPRESENTATION('',(#2767),#2771);+#2767 = LINE('',#2768,#2769);+#2768 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#2769 = VECTOR('',#2770,1.);+#2770 = DIRECTION('',(-0.,1.));+#2771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2772 = PCURVE('',#2384,#2773);+#2773 = DEFINITIONAL_REPRESENTATION('',(#2774),#2778);+#2774 = LINE('',#2775,#2776);+#2775 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#2776 = VECTOR('',#2777,1.);+#2777 = DIRECTION('',(-1.,0.));+#2778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2779 = ORIENTED_EDGE('',*,*,#2780,.T.);+#2780 = EDGE_CURVE('',#2758,#2781,#2783,.T.);+#2781 = VERTEX_POINT('',#2782);+#2782 = CARTESIAN_POINT('',(-5.255,3.63,0.));+#2783 = SURFACE_CURVE('',#2784,(#2788,#2795),.PCURVE_S1.);+#2784 = LINE('',#2785,#2786);+#2785 = CARTESIAN_POINT('',(-5.255,3.63,1.223081297441E-02));+#2786 = VECTOR('',#2787,1.);+#2787 = DIRECTION('',(-0.,-0.,-1.));+#2788 = PCURVE('',#2131,#2789);+#2789 = DEFINITIONAL_REPRESENTATION('',(#2790),#2794);+#2790 = LINE('',#2791,#2792);+#2791 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#2792 = VECTOR('',#2793,1.);+#2793 = DIRECTION('',(1.,0.));+#2794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2795 = PCURVE('',#2412,#2796);+#2796 = DEFINITIONAL_REPRESENTATION('',(#2797),#2801);+#2797 = LINE('',#2798,#2799);+#2798 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#2799 = VECTOR('',#2800,1.);+#2800 = DIRECTION('',(1.,0.));+#2801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2802 = ORIENTED_EDGE('',*,*,#2803,.F.);+#2803 = EDGE_CURVE('',#2804,#2781,#2806,.T.);+#2804 = VERTEX_POINT('',#2805);+#2805 = CARTESIAN_POINT('',(-4.606430027578,3.63,-5.551115123126E-17));+#2806 = SURFACE_CURVE('',#2807,(#2811,#2818),.PCURVE_S1.);+#2807 = LINE('',#2808,#2809);+#2808 = CARTESIAN_POINT('',(-4.5025,3.63,0.));+#2809 = VECTOR('',#2810,1.);+#2810 = DIRECTION('',(-1.,-0.,-0.));+#2811 = PCURVE('',#2131,#2812);+#2812 = DEFINITIONAL_REPRESENTATION('',(#2813),#2817);+#2813 = LINE('',#2814,#2815);+#2814 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#2815 = VECTOR('',#2816,1.);+#2816 = DIRECTION('',(-0.,1.));+#2817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2818 = PCURVE('',#2440,#2819);+#2819 = DEFINITIONAL_REPRESENTATION('',(#2820),#2824);+#2820 = LINE('',#2821,#2822);+#2821 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#2822 = VECTOR('',#2823,1.);+#2823 = DIRECTION('',(-1.,0.));+#2824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2825 = ORIENTED_EDGE('',*,*,#2826,.T.);+#2826 = EDGE_CURVE('',#2804,#2827,#2829,.T.);+#2827 = VERTEX_POINT('',#2828);+#2828 = CARTESIAN_POINT('',(-4.363934772754,3.63,0.140014102897));+#2829 = SURFACE_CURVE('',#2830,(#2835,#2846),.PCURVE_S1.);+#2830 = CIRCLE('',#2831,0.28);+#2831 = AXIS2_PLACEMENT_3D('',#2832,#2833,#2834);+#2832 = CARTESIAN_POINT('',(-4.606430027578,3.63,0.28));+#2833 = DIRECTION('',(0.,-1.,0.));+#2834 = DIRECTION('',(0.,0.,1.));+#2835 = PCURVE('',#2131,#2836);+#2836 = DEFINITIONAL_REPRESENTATION('',(#2837),#2845);+#2837 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2838,#2839,#2840,#2841,+#2842,#2843,#2844),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2838 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#2839 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#2840 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#2841 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#2842 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#2843 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#2844 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#2845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2846 = PCURVE('',#2473,#2847);+#2847 = DEFINITIONAL_REPRESENTATION('',(#2848),#2852);+#2848 = LINE('',#2849,#2850);+#2849 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#2850 = VECTOR('',#2851,1.);+#2851 = DIRECTION('',(-1.,0.));+#2852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2853 = ORIENTED_EDGE('',*,*,#2854,.F.);+#2854 = EDGE_CURVE('',#2855,#2827,#2857,.T.);+#2855 = VERTEX_POINT('',#2856);+#2856 = CARTESIAN_POINT('',(-3.832854330943,3.63,1.059995970601));+#2857 = SURFACE_CURVE('',#2858,(#2862,#2869),.PCURVE_S1.);+#2858 = LINE('',#2859,#2860);+#2859 = CARTESIAN_POINT('',(-3.780894551849,3.63,1.150005036749));+#2860 = VECTOR('',#2861,1.);+#2861 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#2862 = PCURVE('',#2131,#2863);+#2863 = DEFINITIONAL_REPRESENTATION('',(#2864),#2868);+#2864 = LINE('',#2865,#2866);+#2865 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#2866 = VECTOR('',#2867,1.);+#2867 = DIRECTION('',(0.866054481515,0.499949632511));+#2868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2869 = PCURVE('',#2501,#2870);+#2870 = DEFINITIONAL_REPRESENTATION('',(#2871),#2875);+#2871 = LINE('',#2872,#2873);+#2872 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#2873 = VECTOR('',#2874,1.);+#2874 = DIRECTION('',(-1.,0.));+#2875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2876 = ORIENTED_EDGE('',*,*,#2877,.F.);+#2877 = EDGE_CURVE('',#2878,#2855,#2880,.T.);+#2878 = VERTEX_POINT('',#2879);+#2879 = CARTESIAN_POINT('',(-3.763569972422,3.63,1.1));+#2880 = SURFACE_CURVE('',#2881,(#2886,#2897),.PCURVE_S1.);+#2881 = CIRCLE('',#2882,8.E-02);+#2882 = AXIS2_PLACEMENT_3D('',#2883,#2884,#2885);+#2883 = CARTESIAN_POINT('',(-3.763569972422,3.63,1.02));+#2884 = DIRECTION('',(0.,-1.,0.));+#2885 = DIRECTION('',(0.,0.,1.));+#2886 = PCURVE('',#2131,#2887);+#2887 = DEFINITIONAL_REPRESENTATION('',(#2888),#2896);+#2888 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2889,#2890,#2891,#2892,+#2893,#2894,#2895),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2889 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#2890 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#2891 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#2892 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#2893 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#2894 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#2895 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#2896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2897 = PCURVE('',#2534,#2898);+#2898 = DEFINITIONAL_REPRESENTATION('',(#2899),#2903);+#2899 = LINE('',#2900,#2901);+#2900 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#2901 = VECTOR('',#2902,1.);+#2902 = DIRECTION('',(-1.,0.));+#2903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2904 = ORIENTED_EDGE('',*,*,#2905,.F.);+#2905 = EDGE_CURVE('',#2906,#2878,#2908,.T.);+#2906 = VERTEX_POINT('',#2907);+#2907 = CARTESIAN_POINT('',(-3.4975,3.63,1.1));+#2908 = SURFACE_CURVE('',#2909,(#2913,#2920),.PCURVE_S1.);+#2909 = LINE('',#2910,#2911);+#2910 = CARTESIAN_POINT('',(-3.4975,3.63,1.1));+#2911 = VECTOR('',#2912,1.);+#2912 = DIRECTION('',(-1.,-0.,-0.));+#2913 = PCURVE('',#2131,#2914);+#2914 = DEFINITIONAL_REPRESENTATION('',(#2915),#2919);+#2915 = LINE('',#2916,#2917);+#2916 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#2917 = VECTOR('',#2918,1.);+#2918 = DIRECTION('',(-0.,1.));+#2919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2920 = PCURVE('',#2562,#2921);+#2921 = DEFINITIONAL_REPRESENTATION('',(#2922),#2926);+#2922 = LINE('',#2923,#2924);+#2923 = CARTESIAN_POINT('',(0.,-0.18));+#2924 = VECTOR('',#2925,1.);+#2925 = DIRECTION('',(-1.,0.));+#2926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2927 = ORIENTED_EDGE('',*,*,#2928,.F.);+#2928 = EDGE_CURVE('',#2629,#2906,#2929,.T.);+#2929 = SURFACE_CURVE('',#2930,(#2935,#2942),.PCURVE_S1.);+#2930 = CIRCLE('',#2931,0.1);+#2931 = AXIS2_PLACEMENT_3D('',#2932,#2933,#2934);+#2932 = CARTESIAN_POINT('',(-3.4975,3.63,1.2));+#2933 = DIRECTION('',(0.,1.,-0.));+#2934 = DIRECTION('',(-1.,0.,0.));+#2935 = PCURVE('',#2131,#2936);+#2936 = DEFINITIONAL_REPRESENTATION('',(#2937),#2941);+#2937 = CIRCLE('',#2938,0.1);+#2938 = AXIS2_PLACEMENT_2D('',#2939,#2940);+#2939 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#2940 = DIRECTION('',(0.,1.));+#2941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2942 = PCURVE('',#2591,#2943);+#2943 = DEFINITIONAL_REPRESENTATION('',(#2944),#2948);+#2944 = LINE('',#2945,#2946);+#2945 = CARTESIAN_POINT('',(0.,-0.18));+#2946 = VECTOR('',#2947,1.);+#2947 = DIRECTION('',(1.,0.));+#2948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2949 = ORIENTED_EDGE('',*,*,#2628,.F.);+#2950 = ADVANCED_FACE('',(#2951),#2241,.T.);+#2951 = FACE_BOUND('',#2952,.T.);+#2952 = EDGE_LOOP('',(#2953,#2954,#2975,#2976));+#2953 = ORIENTED_EDGE('',*,*,#2279,.T.);+#2954 = ORIENTED_EDGE('',*,*,#2955,.F.);+#2955 = EDGE_CURVE('',#2679,#2280,#2956,.T.);+#2956 = SURFACE_CURVE('',#2957,(#2961,#2968),.PCURVE_S1.);+#2957 = LINE('',#2958,#2959);+#2958 = CARTESIAN_POINT('',(-4.006065227246,3.63,1.159985897103));+#2959 = VECTOR('',#2960,1.);+#2960 = DIRECTION('',(0.,1.,0.));+#2961 = PCURVE('',#2241,#2962);+#2962 = DEFINITIONAL_REPRESENTATION('',(#2963),#2967);+#2963 = LINE('',#2964,#2965);+#2964 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#2965 = VECTOR('',#2966,1.);+#2966 = DIRECTION('',(0.,1.));+#2967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2968 = PCURVE('',#2323,#2969);+#2969 = DEFINITIONAL_REPRESENTATION('',(#2970),#2974);+#2970 = LINE('',#2971,#2972);+#2971 = CARTESIAN_POINT('',(0.,-0.18));+#2972 = VECTOR('',#2973,1.);+#2973 = DIRECTION('',(0.,1.));+#2974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2975 = ORIENTED_EDGE('',*,*,#2678,.F.);+#2976 = ORIENTED_EDGE('',*,*,#2225,.T.);+#2977 = ADVANCED_FACE('',(#2978),#2591,.T.);+#2978 = FACE_BOUND('',#2979,.T.);+#2979 = EDGE_LOOP('',(#2980,#2981,#2982,#3003));+#2980 = ORIENTED_EDGE('',*,*,#2651,.F.);+#2981 = ORIENTED_EDGE('',*,*,#2928,.T.);+#2982 = ORIENTED_EDGE('',*,*,#2983,.F.);+#2983 = EDGE_CURVE('',#2547,#2906,#2984,.T.);+#2984 = SURFACE_CURVE('',#2985,(#2989,#2996),.PCURVE_S1.);+#2985 = LINE('',#2986,#2987);+#2986 = CARTESIAN_POINT('',(-3.4975,3.99,1.1));+#2987 = VECTOR('',#2988,1.);+#2988 = DIRECTION('',(-0.,-1.,-0.));+#2989 = PCURVE('',#2591,#2990);+#2990 = DEFINITIONAL_REPRESENTATION('',(#2991),#2995);+#2991 = LINE('',#2992,#2993);+#2992 = CARTESIAN_POINT('',(4.712388980385,0.18));+#2993 = VECTOR('',#2994,1.);+#2994 = DIRECTION('',(0.,-1.));+#2995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2996 = PCURVE('',#2562,#2997);+#2997 = DEFINITIONAL_REPRESENTATION('',(#2998),#3002);+#2998 = LINE('',#2999,#3000);+#2999 = CARTESIAN_POINT('',(0.,0.18));+#3000 = VECTOR('',#3001,1.);+#3001 = DIRECTION('',(0.,-1.));+#3002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3003 = ORIENTED_EDGE('',*,*,#2574,.F.);+#3004 = ADVANCED_FACE('',(#3005),#2562,.F.);+#3005 = FACE_BOUND('',#3006,.T.);+#3006 = EDGE_LOOP('',(#3007,#3008,#3029,#3030));+#3007 = ORIENTED_EDGE('',*,*,#2905,.T.);+#3008 = ORIENTED_EDGE('',*,*,#3009,.F.);+#3009 = EDGE_CURVE('',#2514,#2878,#3010,.T.);+#3010 = SURFACE_CURVE('',#3011,(#3015,#3022),.PCURVE_S1.);+#3011 = LINE('',#3012,#3013);+#3012 = CARTESIAN_POINT('',(-3.763569972422,3.99,1.1));+#3013 = VECTOR('',#3014,1.);+#3014 = DIRECTION('',(-0.,-1.,-0.));+#3015 = PCURVE('',#2562,#3016);+#3016 = DEFINITIONAL_REPRESENTATION('',(#3017),#3021);+#3017 = LINE('',#3018,#3019);+#3018 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#3019 = VECTOR('',#3020,1.);+#3020 = DIRECTION('',(0.,-1.));+#3021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3022 = PCURVE('',#2534,#3023);+#3023 = DEFINITIONAL_REPRESENTATION('',(#3024),#3028);+#3024 = LINE('',#3025,#3026);+#3025 = CARTESIAN_POINT('',(6.28318530718,0.18));+#3026 = VECTOR('',#3027,1.);+#3027 = DIRECTION('',(-0.,-1.));+#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3029 = ORIENTED_EDGE('',*,*,#2546,.F.);+#3030 = ORIENTED_EDGE('',*,*,#2983,.T.);+#3031 = ADVANCED_FACE('',(#3032),#2534,.F.);+#3032 = FACE_BOUND('',#3033,.F.);+#3033 = EDGE_LOOP('',(#3034,#3035,#3036,#3057));+#3034 = ORIENTED_EDGE('',*,*,#3009,.F.);+#3035 = ORIENTED_EDGE('',*,*,#2513,.T.);+#3036 = ORIENTED_EDGE('',*,*,#3037,.T.);+#3037 = EDGE_CURVE('',#2486,#2855,#3038,.T.);+#3038 = SURFACE_CURVE('',#3039,(#3043,#3050),.PCURVE_S1.);+#3039 = LINE('',#3040,#3041);+#3040 = CARTESIAN_POINT('',(-3.832854330943,3.99,1.059995970601));+#3041 = VECTOR('',#3042,1.);+#3042 = DIRECTION('',(-0.,-1.,-0.));+#3043 = PCURVE('',#2534,#3044);+#3044 = DEFINITIONAL_REPRESENTATION('',(#3045),#3049);+#3045 = LINE('',#3046,#3047);+#3046 = CARTESIAN_POINT('',(5.235929597593,0.18));+#3047 = VECTOR('',#3048,1.);+#3048 = DIRECTION('',(-0.,-1.));+#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3050 = PCURVE('',#2501,#3051);+#3051 = DEFINITIONAL_REPRESENTATION('',(#3052),#3056);+#3052 = LINE('',#3053,#3054);+#3053 = CARTESIAN_POINT('',(0.,0.18));+#3054 = VECTOR('',#3055,1.);+#3055 = DIRECTION('',(0.,-1.));+#3056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3057 = ORIENTED_EDGE('',*,*,#2877,.F.);+#3058 = ADVANCED_FACE('',(#3059),#2501,.F.);+#3059 = FACE_BOUND('',#3060,.T.);+#3060 = EDGE_LOOP('',(#3061,#3062,#3083,#3084));+#3061 = ORIENTED_EDGE('',*,*,#2854,.T.);+#3062 = ORIENTED_EDGE('',*,*,#3063,.F.);+#3063 = EDGE_CURVE('',#2453,#2827,#3064,.T.);+#3064 = SURFACE_CURVE('',#3065,(#3069,#3076),.PCURVE_S1.);+#3065 = LINE('',#3066,#3067);+#3066 = CARTESIAN_POINT('',(-4.363934772754,3.99,0.140014102897));+#3067 = VECTOR('',#3068,1.);+#3068 = DIRECTION('',(-0.,-1.,-0.));+#3069 = PCURVE('',#2501,#3070);+#3070 = DEFINITIONAL_REPRESENTATION('',(#3071),#3075);+#3071 = LINE('',#3072,#3073);+#3072 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#3073 = VECTOR('',#3074,1.);+#3074 = DIRECTION('',(0.,-1.));+#3075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3076 = PCURVE('',#2473,#3077);+#3077 = DEFINITIONAL_REPRESENTATION('',(#3078),#3082);+#3078 = LINE('',#3079,#3080);+#3079 = CARTESIAN_POINT('',(2.094336944003,0.18));+#3080 = VECTOR('',#3081,1.);+#3081 = DIRECTION('',(-0.,-1.));+#3082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3083 = ORIENTED_EDGE('',*,*,#2485,.F.);+#3084 = ORIENTED_EDGE('',*,*,#3037,.T.);+#3085 = ADVANCED_FACE('',(#3086),#2473,.T.);+#3086 = FACE_BOUND('',#3087,.T.);+#3087 = EDGE_LOOP('',(#3088,#3109,#3110,#3111));+#3088 = ORIENTED_EDGE('',*,*,#3089,.F.);+#3089 = EDGE_CURVE('',#2425,#2804,#3090,.T.);+#3090 = SURFACE_CURVE('',#3091,(#3095,#3102),.PCURVE_S1.);+#3091 = LINE('',#3092,#3093);+#3092 = CARTESIAN_POINT('',(-4.606430027578,3.99,-5.551115123126E-17));+#3093 = VECTOR('',#3094,1.);+#3094 = DIRECTION('',(-0.,-1.,-0.));+#3095 = PCURVE('',#2473,#3096);+#3096 = DEFINITIONAL_REPRESENTATION('',(#3097),#3101);+#3097 = LINE('',#3098,#3099);+#3098 = CARTESIAN_POINT('',(3.14159265359,0.18));+#3099 = VECTOR('',#3100,1.);+#3100 = DIRECTION('',(-0.,-1.));+#3101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3102 = PCURVE('',#2440,#3103);+#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3108);+#3104 = LINE('',#3105,#3106);+#3105 = CARTESIAN_POINT('',(0.,0.18));+#3106 = VECTOR('',#3107,1.);+#3107 = DIRECTION('',(0.,-1.));+#3108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3109 = ORIENTED_EDGE('',*,*,#2452,.T.);+#3110 = ORIENTED_EDGE('',*,*,#3063,.T.);+#3111 = ORIENTED_EDGE('',*,*,#2826,.F.);+#3112 = ADVANCED_FACE('',(#3113),#2440,.F.);+#3113 = FACE_BOUND('',#3114,.T.);+#3114 = EDGE_LOOP('',(#3115,#3116,#3117,#3138));+#3115 = ORIENTED_EDGE('',*,*,#3089,.T.);+#3116 = ORIENTED_EDGE('',*,*,#2803,.T.);+#3117 = ORIENTED_EDGE('',*,*,#3118,.T.);+#3118 = EDGE_CURVE('',#2781,#2397,#3119,.T.);+#3119 = SURFACE_CURVE('',#3120,(#3124,#3131),.PCURVE_S1.);+#3120 = LINE('',#3121,#3122);+#3121 = CARTESIAN_POINT('',(-5.255,3.47,0.));+#3122 = VECTOR('',#3123,1.);+#3123 = DIRECTION('',(0.,1.,0.));+#3124 = PCURVE('',#2440,#3125);+#3125 = DEFINITIONAL_REPRESENTATION('',(#3126),#3130);+#3126 = LINE('',#3127,#3128);+#3127 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#3128 = VECTOR('',#3129,1.);+#3129 = DIRECTION('',(0.,1.));+#3130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3131 = PCURVE('',#2412,#3132);+#3132 = DEFINITIONAL_REPRESENTATION('',(#3133),#3137);+#3133 = LINE('',#3134,#3135);+#3134 = CARTESIAN_POINT('',(-0.5,-0.34));+#3135 = VECTOR('',#3136,1.);+#3136 = DIRECTION('',(0.,-1.));+#3137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3138 = ORIENTED_EDGE('',*,*,#2424,.F.);+#3139 = ADVANCED_FACE('',(#3140),#2412,.T.);+#3140 = FACE_BOUND('',#3141,.F.);+#3141 = EDGE_LOOP('',(#3142,#3163,#3164,#3165));+#3142 = ORIENTED_EDGE('',*,*,#3143,.F.);+#3143 = EDGE_CURVE('',#2758,#2369,#3144,.T.);+#3144 = SURFACE_CURVE('',#3145,(#3149,#3156),.PCURVE_S1.);+#3145 = LINE('',#3146,#3147);+#3146 = CARTESIAN_POINT('',(-5.255,3.47,0.2));+#3147 = VECTOR('',#3148,1.);+#3148 = DIRECTION('',(0.,1.,0.));+#3149 = PCURVE('',#2412,#3150);+#3150 = DEFINITIONAL_REPRESENTATION('',(#3151),#3155);+#3151 = LINE('',#3152,#3153);+#3152 = CARTESIAN_POINT('',(-0.7,-0.34));+#3153 = VECTOR('',#3154,1.);+#3154 = DIRECTION('',(0.,-1.));+#3155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3156 = PCURVE('',#2384,#3157);+#3157 = DEFINITIONAL_REPRESENTATION('',(#3158),#3162);+#3158 = LINE('',#3159,#3160);+#3159 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#3160 = VECTOR('',#3161,1.);+#3161 = DIRECTION('',(0.,1.));+#3162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3163 = ORIENTED_EDGE('',*,*,#2780,.T.);+#3164 = ORIENTED_EDGE('',*,*,#3118,.T.);+#3165 = ORIENTED_EDGE('',*,*,#2396,.F.);+#3166 = ADVANCED_FACE('',(#3167),#2384,.T.);+#3167 = FACE_BOUND('',#3168,.F.);+#3168 = EDGE_LOOP('',(#3169,#3190,#3191,#3192));+#3169 = ORIENTED_EDGE('',*,*,#3170,.T.);+#3170 = EDGE_CURVE('',#2336,#2730,#3171,.T.);+#3171 = SURFACE_CURVE('',#3172,(#3176,#3183),.PCURVE_S1.);+#3172 = LINE('',#3173,#3174);+#3173 = CARTESIAN_POINT('',(-4.606430027578,3.99,0.2));+#3174 = VECTOR('',#3175,1.);+#3175 = DIRECTION('',(-0.,-1.,-0.));+#3176 = PCURVE('',#2384,#3177);+#3177 = DEFINITIONAL_REPRESENTATION('',(#3178),#3182);+#3178 = LINE('',#3179,#3180);+#3179 = CARTESIAN_POINT('',(0.,0.18));+#3180 = VECTOR('',#3181,1.);+#3181 = DIRECTION('',(0.,-1.));+#3182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3183 = PCURVE('',#2356,#3184);+#3184 = DEFINITIONAL_REPRESENTATION('',(#3185),#3189);+#3185 = LINE('',#3186,#3187);+#3186 = CARTESIAN_POINT('',(3.14159265359,0.18));+#3187 = VECTOR('',#3188,1.);+#3188 = DIRECTION('',(-0.,-1.));+#3189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3190 = ORIENTED_EDGE('',*,*,#2757,.T.);+#3191 = ORIENTED_EDGE('',*,*,#3143,.T.);+#3192 = ORIENTED_EDGE('',*,*,#2368,.F.);+#3193 = ADVANCED_FACE('',(#3194),#2356,.F.);+#3194 = FACE_BOUND('',#3195,.F.);+#3195 = EDGE_LOOP('',(#3196,#3197,#3198,#3219));+#3196 = ORIENTED_EDGE('',*,*,#3170,.F.);+#3197 = ORIENTED_EDGE('',*,*,#2335,.T.);+#3198 = ORIENTED_EDGE('',*,*,#3199,.T.);+#3199 = EDGE_CURVE('',#2308,#2707,#3200,.T.);+#3200 = SURFACE_CURVE('',#3201,(#3205,#3212),.PCURVE_S1.);+#3201 = LINE('',#3202,#3203);+#3202 = CARTESIAN_POINT('',(-4.537145669057,3.99,0.240004029399));+#3203 = VECTOR('',#3204,1.);+#3204 = DIRECTION('',(-0.,-1.,-0.));+#3205 = PCURVE('',#2356,#3206);+#3206 = DEFINITIONAL_REPRESENTATION('',(#3207),#3211);+#3207 = LINE('',#3208,#3209);+#3208 = CARTESIAN_POINT('',(2.094336944003,0.18));+#3209 = VECTOR('',#3210,1.);+#3210 = DIRECTION('',(-0.,-1.));+#3211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3212 = PCURVE('',#2323,#3213);+#3213 = DEFINITIONAL_REPRESENTATION('',(#3214),#3218);+#3214 = LINE('',#3215,#3216);+#3215 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#3216 = VECTOR('',#3217,1.);+#3217 = DIRECTION('',(0.,-1.));+#3218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3219 = ORIENTED_EDGE('',*,*,#2729,.F.);+#3220 = ADVANCED_FACE('',(#3221),#2323,.T.);+#3221 = FACE_BOUND('',#3222,.F.);+#3222 = EDGE_LOOP('',(#3223,#3224,#3225,#3226));+#3223 = ORIENTED_EDGE('',*,*,#2955,.F.);+#3224 = ORIENTED_EDGE('',*,*,#2706,.T.);+#3225 = ORIENTED_EDGE('',*,*,#3199,.F.);+#3226 = ORIENTED_EDGE('',*,*,#2307,.F.);+#3227 = MANIFOLD_SOLID_BREP('',#3228);+#3228 = CLOSED_SHELL('',(#3229,#3351,#3427,#3777,#3826,#4104,#4131,#4158+ ,#4185,#4212,#4239,#4266,#4293,#4320,#4347,#4374));+#3229 = ADVANCED_FACE('',(#3230),#3244,.T.);+#3230 = FACE_BOUND('',#3231,.T.);+#3231 = EDGE_LOOP('',(#3232,#3267,#3296,#3324));+#3232 = ORIENTED_EDGE('',*,*,#3233,.F.);+#3233 = EDGE_CURVE('',#3234,#3236,#3238,.T.);+#3234 = VERTEX_POINT('',#3235);+#3235 = CARTESIAN_POINT('',(-3.4975,2.36,1.3));+#3236 = VERTEX_POINT('',#3237);+#3237 = CARTESIAN_POINT('',(-3.4975,2.72,1.3));+#3238 = SURFACE_CURVE('',#3239,(#3243,#3255),.PCURVE_S1.);+#3239 = LINE('',#3240,#3241);+#3240 = CARTESIAN_POINT('',(-3.4975,2.36,1.3));+#3241 = VECTOR('',#3242,1.);+#3242 = DIRECTION('',(0.,1.,0.));+#3243 = PCURVE('',#3244,#3249);+#3244 = CYLINDRICAL_SURFACE('',#3245,0.1);+#3245 = AXIS2_PLACEMENT_3D('',#3246,#3247,#3248);+#3246 = CARTESIAN_POINT('',(-3.4975,2.54,1.2));+#3247 = DIRECTION('',(0.,1.,0.));+#3248 = DIRECTION('',(-1.,-0.,-0.));+#3249 = DEFINITIONAL_REPRESENTATION('',(#3250),#3254);+#3250 = LINE('',#3251,#3252);+#3251 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#3252 = VECTOR('',#3253,1.);+#3253 = DIRECTION('',(-0.,1.));+#3254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3255 = PCURVE('',#3256,#3261);+#3256 = PLANE('',#3257);+#3257 = AXIS2_PLACEMENT_3D('',#3258,#3259,#3260);+#3258 = CARTESIAN_POINT('',(-3.4975,2.54,1.3));+#3259 = DIRECTION('',(0.,0.,1.));+#3260 = DIRECTION('',(1.,0.,0.));+#3261 = DEFINITIONAL_REPRESENTATION('',(#3262),#3266);+#3262 = LINE('',#3263,#3264);+#3263 = CARTESIAN_POINT('',(0.,-0.18));+#3264 = VECTOR('',#3265,1.);+#3265 = DIRECTION('',(0.,1.));+#3266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3267 = ORIENTED_EDGE('',*,*,#3268,.T.);+#3268 = EDGE_CURVE('',#3234,#3269,#3271,.T.);+#3269 = VERTEX_POINT('',#3270);+#3270 = CARTESIAN_POINT('',(-3.4475,2.36,1.286602540378));+#3271 = SURFACE_CURVE('',#3272,(#3277,#3284),.PCURVE_S1.);+#3272 = CIRCLE('',#3273,0.1);+#3273 = AXIS2_PLACEMENT_3D('',#3274,#3275,#3276);+#3274 = CARTESIAN_POINT('',(-3.4975,2.36,1.2));+#3275 = DIRECTION('',(0.,1.,-0.));+#3276 = DIRECTION('',(-1.,0.,0.));+#3277 = PCURVE('',#3244,#3278);+#3278 = DEFINITIONAL_REPRESENTATION('',(#3279),#3283);+#3279 = LINE('',#3280,#3281);+#3280 = CARTESIAN_POINT('',(0.,-0.18));+#3281 = VECTOR('',#3282,1.);+#3282 = DIRECTION('',(1.,0.));+#3283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3284 = PCURVE('',#3285,#3290);+#3285 = PLANE('',#3286);+#3286 = AXIS2_PLACEMENT_3D('',#3287,#3288,#3289);+#3287 = CARTESIAN_POINT('',(-4.408401242914,2.36,0.524461625949));+#3288 = DIRECTION('',(0.,1.,0.));+#3289 = DIRECTION('',(0.,0.,-1.));+#3290 = DEFINITIONAL_REPRESENTATION('',(#3291),#3295);+#3291 = CIRCLE('',#3292,0.1);+#3292 = AXIS2_PLACEMENT_2D('',#3293,#3294);+#3293 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#3294 = DIRECTION('',(0.,1.));+#3295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3296 = ORIENTED_EDGE('',*,*,#3297,.T.);+#3297 = EDGE_CURVE('',#3269,#3298,#3300,.T.);+#3298 = VERTEX_POINT('',#3299);+#3299 = CARTESIAN_POINT('',(-3.4475,2.72,1.286602540378));+#3300 = SURFACE_CURVE('',#3301,(#3305,#3312),.PCURVE_S1.);+#3301 = LINE('',#3302,#3303);+#3302 = CARTESIAN_POINT('',(-3.4475,2.54,1.286602540378));+#3303 = VECTOR('',#3304,1.);+#3304 = DIRECTION('',(0.,1.,0.));+#3305 = PCURVE('',#3244,#3306);+#3306 = DEFINITIONAL_REPRESENTATION('',(#3307),#3311);+#3307 = LINE('',#3308,#3309);+#3308 = CARTESIAN_POINT('',(2.094395102393,0.));+#3309 = VECTOR('',#3310,1.);+#3310 = DIRECTION('',(0.,1.));+#3311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3312 = PCURVE('',#3313,#3318);+#3313 = PLANE('',#3314);+#3314 = AXIS2_PLACEMENT_3D('',#3315,#3316,#3317);+#3315 = CARTESIAN_POINT('',(-3.4475,1.86,-0.5));+#3316 = DIRECTION('',(-1.,0.,0.));+#3317 = DIRECTION('',(0.,0.,-1.));+#3318 = DEFINITIONAL_REPRESENTATION('',(#3319),#3323);+#3319 = LINE('',#3320,#3321);+#3320 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#3321 = VECTOR('',#3322,1.);+#3322 = DIRECTION('',(0.,-1.));+#3323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3324 = ORIENTED_EDGE('',*,*,#3325,.F.);+#3325 = EDGE_CURVE('',#3236,#3298,#3326,.T.);+#3326 = SURFACE_CURVE('',#3327,(#3332,#3339),.PCURVE_S1.);+#3327 = CIRCLE('',#3328,0.1);+#3328 = AXIS2_PLACEMENT_3D('',#3329,#3330,#3331);+#3329 = CARTESIAN_POINT('',(-3.4975,2.72,1.2));+#3330 = DIRECTION('',(0.,1.,-0.));+#3331 = DIRECTION('',(-1.,0.,0.));+#3332 = PCURVE('',#3244,#3333);+#3333 = DEFINITIONAL_REPRESENTATION('',(#3334),#3338);+#3334 = LINE('',#3335,#3336);+#3335 = CARTESIAN_POINT('',(-0.,0.18));+#3336 = VECTOR('',#3337,1.);+#3337 = DIRECTION('',(1.,-0.));+#3338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3339 = PCURVE('',#3340,#3345);+#3340 = PLANE('',#3341);+#3341 = AXIS2_PLACEMENT_3D('',#3342,#3343,#3344);+#3342 = CARTESIAN_POINT('',(-4.408401242914,2.72,0.524461625949));+#3343 = DIRECTION('',(0.,1.,0.));+#3344 = DIRECTION('',(0.,0.,-1.));+#3345 = DEFINITIONAL_REPRESENTATION('',(#3346),#3350);+#3346 = CIRCLE('',#3347,0.1);+#3347 = AXIS2_PLACEMENT_2D('',#3348,#3349);+#3348 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#3349 = DIRECTION('',(0.,1.));+#3350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3351 = ADVANCED_FACE('',(#3352),#3256,.T.);+#3352 = FACE_BOUND('',#3353,.F.);+#3353 = EDGE_LOOP('',(#3354,#3355,#3378,#3406));+#3354 = ORIENTED_EDGE('',*,*,#3233,.F.);+#3355 = ORIENTED_EDGE('',*,*,#3356,.T.);+#3356 = EDGE_CURVE('',#3234,#3357,#3359,.T.);+#3357 = VERTEX_POINT('',#3358);+#3358 = CARTESIAN_POINT('',(-3.763569972422,2.36,1.3));+#3359 = SURFACE_CURVE('',#3360,(#3364,#3371),.PCURVE_S1.);+#3360 = LINE('',#3361,#3362);+#3361 = CARTESIAN_POINT('',(-3.4975,2.36,1.3));+#3362 = VECTOR('',#3363,1.);+#3363 = DIRECTION('',(-1.,-0.,-0.));+#3364 = PCURVE('',#3256,#3365);+#3365 = DEFINITIONAL_REPRESENTATION('',(#3366),#3370);+#3366 = LINE('',#3367,#3368);+#3367 = CARTESIAN_POINT('',(0.,-0.18));+#3368 = VECTOR('',#3369,1.);+#3369 = DIRECTION('',(-1.,0.));+#3370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3371 = PCURVE('',#3285,#3372);+#3372 = DEFINITIONAL_REPRESENTATION('',(#3373),#3377);+#3373 = LINE('',#3374,#3375);+#3374 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#3375 = VECTOR('',#3376,1.);+#3376 = DIRECTION('',(-0.,1.));+#3377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3378 = ORIENTED_EDGE('',*,*,#3379,.T.);+#3379 = EDGE_CURVE('',#3357,#3380,#3382,.T.);+#3380 = VERTEX_POINT('',#3381);+#3381 = CARTESIAN_POINT('',(-3.763569972422,2.72,1.3));+#3382 = SURFACE_CURVE('',#3383,(#3387,#3394),.PCURVE_S1.);+#3383 = LINE('',#3384,#3385);+#3384 = CARTESIAN_POINT('',(-3.763569972422,2.36,1.3));+#3385 = VECTOR('',#3386,1.);+#3386 = DIRECTION('',(0.,1.,0.));+#3387 = PCURVE('',#3256,#3388);+#3388 = DEFINITIONAL_REPRESENTATION('',(#3389),#3393);+#3389 = LINE('',#3390,#3391);+#3390 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#3391 = VECTOR('',#3392,1.);+#3392 = DIRECTION('',(0.,1.));+#3393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3394 = PCURVE('',#3395,#3400);+#3395 = CYLINDRICAL_SURFACE('',#3396,0.28);+#3396 = AXIS2_PLACEMENT_3D('',#3397,#3398,#3399);+#3397 = CARTESIAN_POINT('',(-3.763569972422,2.54,1.02));+#3398 = DIRECTION('',(0.,1.,0.));+#3399 = DIRECTION('',(0.,0.,1.));+#3400 = DEFINITIONAL_REPRESENTATION('',(#3401),#3405);+#3401 = LINE('',#3402,#3403);+#3402 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#3403 = VECTOR('',#3404,1.);+#3404 = DIRECTION('',(0.,1.));+#3405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3406 = ORIENTED_EDGE('',*,*,#3407,.F.);+#3407 = EDGE_CURVE('',#3236,#3380,#3408,.T.);+#3408 = SURFACE_CURVE('',#3409,(#3413,#3420),.PCURVE_S1.);+#3409 = LINE('',#3410,#3411);+#3410 = CARTESIAN_POINT('',(-3.4975,2.72,1.3));+#3411 = VECTOR('',#3412,1.);+#3412 = DIRECTION('',(-1.,-0.,-0.));+#3413 = PCURVE('',#3256,#3414);+#3414 = DEFINITIONAL_REPRESENTATION('',(#3415),#3419);+#3415 = LINE('',#3416,#3417);+#3416 = CARTESIAN_POINT('',(0.,0.18));+#3417 = VECTOR('',#3418,1.);+#3418 = DIRECTION('',(-1.,0.));+#3419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3420 = PCURVE('',#3340,#3421);+#3421 = DEFINITIONAL_REPRESENTATION('',(#3422),#3426);+#3422 = LINE('',#3423,#3424);+#3423 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#3424 = VECTOR('',#3425,1.);+#3425 = DIRECTION('',(-0.,1.));+#3426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3427 = ADVANCED_FACE('',(#3428),#3340,.T.);+#3428 = FACE_BOUND('',#3429,.F.);+#3429 = EDGE_LOOP('',(#3430,#3431,#3432,#3460,#3488,#3521,#3549,#3577,+ #3605,#3638,#3666,#3699,#3727,#3756));+#3430 = ORIENTED_EDGE('',*,*,#3325,.F.);+#3431 = ORIENTED_EDGE('',*,*,#3407,.T.);+#3432 = ORIENTED_EDGE('',*,*,#3433,.T.);+#3433 = EDGE_CURVE('',#3380,#3434,#3436,.T.);+#3434 = VERTEX_POINT('',#3435);+#3435 = CARTESIAN_POINT('',(-4.006065227246,2.72,1.159985897103));+#3436 = SURFACE_CURVE('',#3437,(#3442,#3453),.PCURVE_S1.);+#3437 = CIRCLE('',#3438,0.28);+#3438 = AXIS2_PLACEMENT_3D('',#3439,#3440,#3441);+#3439 = CARTESIAN_POINT('',(-3.763569972422,2.72,1.02));+#3440 = DIRECTION('',(0.,-1.,0.));+#3441 = DIRECTION('',(0.,0.,1.));+#3442 = PCURVE('',#3340,#3443);+#3443 = DEFINITIONAL_REPRESENTATION('',(#3444),#3452);+#3444 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3445,#3446,#3447,#3448,+#3449,#3450,#3451),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3445 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#3446 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#3447 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#3448 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#3449 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#3450 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#3451 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#3452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3453 = PCURVE('',#3395,#3454);+#3454 = DEFINITIONAL_REPRESENTATION('',(#3455),#3459);+#3455 = LINE('',#3456,#3457);+#3456 = CARTESIAN_POINT('',(6.28318530718,0.18));+#3457 = VECTOR('',#3458,1.);+#3458 = DIRECTION('',(-1.,-0.));+#3459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3460 = ORIENTED_EDGE('',*,*,#3461,.T.);+#3461 = EDGE_CURVE('',#3434,#3462,#3464,.T.);+#3462 = VERTEX_POINT('',#3463);+#3463 = CARTESIAN_POINT('',(-4.537145669057,2.72,0.240004029399));+#3464 = SURFACE_CURVE('',#3465,(#3469,#3476),.PCURVE_S1.);+#3465 = LINE('',#3466,#3467);+#3466 = CARTESIAN_POINT('',(-3.954105448151,2.72,1.249994963251));+#3467 = VECTOR('',#3468,1.);+#3468 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#3469 = PCURVE('',#3340,#3470);+#3470 = DEFINITIONAL_REPRESENTATION('',(#3471),#3475);+#3471 = LINE('',#3472,#3473);+#3472 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#3473 = VECTOR('',#3474,1.);+#3474 = DIRECTION('',(0.866054481515,0.499949632511));+#3475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3476 = PCURVE('',#3477,#3482);+#3477 = PLANE('',#3478);+#3478 = AXIS2_PLACEMENT_3D('',#3479,#3480,#3481);+#3479 = CARTESIAN_POINT('',(-4.006065227246,2.54,1.159985897103));+#3480 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#3481 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#3482 = DEFINITIONAL_REPRESENTATION('',(#3483),#3487);+#3483 = LINE('',#3484,#3485);+#3484 = CARTESIAN_POINT('',(0.103930027578,0.18));+#3485 = VECTOR('',#3486,1.);+#3486 = DIRECTION('',(-1.,0.));+#3487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3488 = ORIENTED_EDGE('',*,*,#3489,.F.);+#3489 = EDGE_CURVE('',#3490,#3462,#3492,.T.);+#3490 = VERTEX_POINT('',#3491);+#3491 = CARTESIAN_POINT('',(-4.606430027578,2.72,0.2));+#3492 = SURFACE_CURVE('',#3493,(#3498,#3509),.PCURVE_S1.);+#3493 = CIRCLE('',#3494,8.E-02);+#3494 = AXIS2_PLACEMENT_3D('',#3495,#3496,#3497);+#3495 = CARTESIAN_POINT('',(-4.606430027578,2.72,0.28));+#3496 = DIRECTION('',(0.,-1.,0.));+#3497 = DIRECTION('',(0.,0.,1.));+#3498 = PCURVE('',#3340,#3499);+#3499 = DEFINITIONAL_REPRESENTATION('',(#3500),#3508);+#3500 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3501,#3502,#3503,#3504,+#3505,#3506,#3507),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3501 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#3502 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#3503 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#3504 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#3505 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#3506 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#3507 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#3508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3509 = PCURVE('',#3510,#3515);+#3510 = CYLINDRICAL_SURFACE('',#3511,8.E-02);+#3511 = AXIS2_PLACEMENT_3D('',#3512,#3513,#3514);+#3512 = CARTESIAN_POINT('',(-4.606430027578,2.54,0.28));+#3513 = DIRECTION('',(0.,1.,0.));+#3514 = DIRECTION('',(0.,0.,1.));+#3515 = DEFINITIONAL_REPRESENTATION('',(#3516),#3520);+#3516 = LINE('',#3517,#3518);+#3517 = CARTESIAN_POINT('',(6.28318530718,0.18));+#3518 = VECTOR('',#3519,1.);+#3519 = DIRECTION('',(-1.,-0.));+#3520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3521 = ORIENTED_EDGE('',*,*,#3522,.T.);+#3522 = EDGE_CURVE('',#3490,#3523,#3525,.T.);+#3523 = VERTEX_POINT('',#3524);+#3524 = CARTESIAN_POINT('',(-5.255,2.72,0.2));+#3525 = SURFACE_CURVE('',#3526,(#3530,#3537),.PCURVE_S1.);+#3526 = LINE('',#3527,#3528);+#3527 = CARTESIAN_POINT('',(-4.5025,2.72,0.2));+#3528 = VECTOR('',#3529,1.);+#3529 = DIRECTION('',(-1.,-0.,-0.));+#3530 = PCURVE('',#3340,#3531);+#3531 = DEFINITIONAL_REPRESENTATION('',(#3532),#3536);+#3532 = LINE('',#3533,#3534);+#3533 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#3534 = VECTOR('',#3535,1.);+#3535 = DIRECTION('',(-0.,1.));+#3536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3537 = PCURVE('',#3538,#3543);+#3538 = PLANE('',#3539);+#3539 = AXIS2_PLACEMENT_3D('',#3540,#3541,#3542);+#3540 = CARTESIAN_POINT('',(-4.606430027578,2.54,0.2));+#3541 = DIRECTION('',(0.,0.,1.));+#3542 = DIRECTION('',(1.,0.,0.));+#3543 = DEFINITIONAL_REPRESENTATION('',(#3544),#3548);+#3544 = LINE('',#3545,#3546);+#3545 = CARTESIAN_POINT('',(0.103930027578,0.18));+#3546 = VECTOR('',#3547,1.);+#3547 = DIRECTION('',(-1.,0.));+#3548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3549 = ORIENTED_EDGE('',*,*,#3550,.T.);+#3550 = EDGE_CURVE('',#3523,#3551,#3553,.T.);+#3551 = VERTEX_POINT('',#3552);+#3552 = CARTESIAN_POINT('',(-5.255,2.72,0.));+#3553 = SURFACE_CURVE('',#3554,(#3558,#3565),.PCURVE_S1.);+#3554 = LINE('',#3555,#3556);+#3555 = CARTESIAN_POINT('',(-5.255,2.72,1.223081297441E-02));+#3556 = VECTOR('',#3557,1.);+#3557 = DIRECTION('',(-0.,-0.,-1.));+#3558 = PCURVE('',#3340,#3559);+#3559 = DEFINITIONAL_REPRESENTATION('',(#3560),#3564);+#3560 = LINE('',#3561,#3562);+#3561 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#3562 = VECTOR('',#3563,1.);+#3563 = DIRECTION('',(1.,0.));+#3564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3565 = PCURVE('',#3566,#3571);+#3566 = PLANE('',#3567);+#3567 = AXIS2_PLACEMENT_3D('',#3568,#3569,#3570);+#3568 = CARTESIAN_POINT('',(-5.255,1.86,-0.5));+#3569 = DIRECTION('',(-1.,0.,0.));+#3570 = DIRECTION('',(0.,0.,-1.));+#3571 = DEFINITIONAL_REPRESENTATION('',(#3572),#3576);+#3572 = LINE('',#3573,#3574);+#3573 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#3574 = VECTOR('',#3575,1.);+#3575 = DIRECTION('',(1.,0.));+#3576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3577 = ORIENTED_EDGE('',*,*,#3578,.F.);+#3578 = EDGE_CURVE('',#3579,#3551,#3581,.T.);+#3579 = VERTEX_POINT('',#3580);+#3580 = CARTESIAN_POINT('',(-4.606430027578,2.72,-5.551115123126E-17));+#3581 = SURFACE_CURVE('',#3582,(#3586,#3593),.PCURVE_S1.);+#3582 = LINE('',#3583,#3584);+#3583 = CARTESIAN_POINT('',(-4.5025,2.72,0.));+#3584 = VECTOR('',#3585,1.);+#3585 = DIRECTION('',(-1.,-0.,-0.));+#3586 = PCURVE('',#3340,#3587);+#3587 = DEFINITIONAL_REPRESENTATION('',(#3588),#3592);+#3588 = LINE('',#3589,#3590);+#3589 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#3590 = VECTOR('',#3591,1.);+#3591 = DIRECTION('',(-0.,1.));+#3592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3593 = PCURVE('',#3594,#3599);+#3594 = PLANE('',#3595);+#3595 = AXIS2_PLACEMENT_3D('',#3596,#3597,#3598);+#3596 = CARTESIAN_POINT('',(-4.606430027578,2.54,0.));+#3597 = DIRECTION('',(0.,0.,1.));+#3598 = DIRECTION('',(1.,0.,0.));+#3599 = DEFINITIONAL_REPRESENTATION('',(#3600),#3604);+#3600 = LINE('',#3601,#3602);+#3601 = CARTESIAN_POINT('',(0.103930027578,0.18));+#3602 = VECTOR('',#3603,1.);+#3603 = DIRECTION('',(-1.,0.));+#3604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3605 = ORIENTED_EDGE('',*,*,#3606,.T.);+#3606 = EDGE_CURVE('',#3579,#3607,#3609,.T.);+#3607 = VERTEX_POINT('',#3608);+#3608 = CARTESIAN_POINT('',(-4.363934772754,2.72,0.140014102897));+#3609 = SURFACE_CURVE('',#3610,(#3615,#3626),.PCURVE_S1.);+#3610 = CIRCLE('',#3611,0.28);+#3611 = AXIS2_PLACEMENT_3D('',#3612,#3613,#3614);+#3612 = CARTESIAN_POINT('',(-4.606430027578,2.72,0.28));+#3613 = DIRECTION('',(0.,-1.,0.));+#3614 = DIRECTION('',(0.,0.,1.));+#3615 = PCURVE('',#3340,#3616);+#3616 = DEFINITIONAL_REPRESENTATION('',(#3617),#3625);+#3617 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3618,#3619,#3620,#3621,+#3622,#3623,#3624),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3618 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#3619 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#3620 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#3621 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#3622 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#3623 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#3624 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#3625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3626 = PCURVE('',#3627,#3632);+#3627 = CYLINDRICAL_SURFACE('',#3628,0.28);+#3628 = AXIS2_PLACEMENT_3D('',#3629,#3630,#3631);+#3629 = CARTESIAN_POINT('',(-4.606430027578,2.54,0.28));+#3630 = DIRECTION('',(0.,1.,0.));+#3631 = DIRECTION('',(0.,0.,1.));+#3632 = DEFINITIONAL_REPRESENTATION('',(#3633),#3637);+#3633 = LINE('',#3634,#3635);+#3634 = CARTESIAN_POINT('',(6.28318530718,0.18));+#3635 = VECTOR('',#3636,1.);+#3636 = DIRECTION('',(-1.,-0.));+#3637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3638 = ORIENTED_EDGE('',*,*,#3639,.F.);+#3639 = EDGE_CURVE('',#3640,#3607,#3642,.T.);+#3640 = VERTEX_POINT('',#3641);+#3641 = CARTESIAN_POINT('',(-3.832854330943,2.72,1.059995970601));+#3642 = SURFACE_CURVE('',#3643,(#3647,#3654),.PCURVE_S1.);+#3643 = LINE('',#3644,#3645);+#3644 = CARTESIAN_POINT('',(-3.780894551849,2.72,1.150005036749));+#3645 = VECTOR('',#3646,1.);+#3646 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#3647 = PCURVE('',#3340,#3648);+#3648 = DEFINITIONAL_REPRESENTATION('',(#3649),#3653);+#3649 = LINE('',#3650,#3651);+#3650 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#3651 = VECTOR('',#3652,1.);+#3652 = DIRECTION('',(0.866054481515,0.499949632511));+#3653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3654 = PCURVE('',#3655,#3660);+#3655 = PLANE('',#3656);+#3656 = AXIS2_PLACEMENT_3D('',#3657,#3658,#3659);+#3657 = CARTESIAN_POINT('',(-3.832854330943,2.54,1.059995970601));+#3658 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#3659 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#3660 = DEFINITIONAL_REPRESENTATION('',(#3661),#3665);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(0.103930027578,0.18));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(-1.,0.));+#3665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3666 = ORIENTED_EDGE('',*,*,#3667,.F.);+#3667 = EDGE_CURVE('',#3668,#3640,#3670,.T.);+#3668 = VERTEX_POINT('',#3669);+#3669 = CARTESIAN_POINT('',(-3.763569972422,2.72,1.1));+#3670 = SURFACE_CURVE('',#3671,(#3676,#3687),.PCURVE_S1.);+#3671 = CIRCLE('',#3672,8.E-02);+#3672 = AXIS2_PLACEMENT_3D('',#3673,#3674,#3675);+#3673 = CARTESIAN_POINT('',(-3.763569972422,2.72,1.02));+#3674 = DIRECTION('',(0.,-1.,0.));+#3675 = DIRECTION('',(0.,0.,1.));+#3676 = PCURVE('',#3340,#3677);+#3677 = DEFINITIONAL_REPRESENTATION('',(#3678),#3686);+#3678 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3679,#3680,#3681,#3682,+#3683,#3684,#3685),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3679 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#3680 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#3681 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#3682 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#3683 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#3684 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#3685 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#3686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3687 = PCURVE('',#3688,#3693);+#3688 = CYLINDRICAL_SURFACE('',#3689,8.E-02);+#3689 = AXIS2_PLACEMENT_3D('',#3690,#3691,#3692);+#3690 = CARTESIAN_POINT('',(-3.763569972422,2.54,1.02));+#3691 = DIRECTION('',(0.,1.,0.));+#3692 = DIRECTION('',(0.,0.,1.));+#3693 = DEFINITIONAL_REPRESENTATION('',(#3694),#3698);+#3694 = LINE('',#3695,#3696);+#3695 = CARTESIAN_POINT('',(6.28318530718,0.18));+#3696 = VECTOR('',#3697,1.);+#3697 = DIRECTION('',(-1.,-0.));+#3698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3699 = ORIENTED_EDGE('',*,*,#3700,.F.);+#3700 = EDGE_CURVE('',#3701,#3668,#3703,.T.);+#3701 = VERTEX_POINT('',#3702);+#3702 = CARTESIAN_POINT('',(-3.4975,2.72,1.1));+#3703 = SURFACE_CURVE('',#3704,(#3708,#3715),.PCURVE_S1.);+#3704 = LINE('',#3705,#3706);+#3705 = CARTESIAN_POINT('',(-3.4975,2.72,1.1));+#3706 = VECTOR('',#3707,1.);+#3707 = DIRECTION('',(-1.,-0.,-0.));+#3708 = PCURVE('',#3340,#3709);+#3709 = DEFINITIONAL_REPRESENTATION('',(#3710),#3714);+#3710 = LINE('',#3711,#3712);+#3711 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#3712 = VECTOR('',#3713,1.);+#3713 = DIRECTION('',(-0.,1.));+#3714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3715 = PCURVE('',#3716,#3721);+#3716 = PLANE('',#3717);+#3717 = AXIS2_PLACEMENT_3D('',#3718,#3719,#3720);+#3718 = CARTESIAN_POINT('',(-3.4975,2.54,1.1));+#3719 = DIRECTION('',(0.,0.,1.));+#3720 = DIRECTION('',(1.,0.,0.));+#3721 = DEFINITIONAL_REPRESENTATION('',(#3722),#3726);+#3722 = LINE('',#3723,#3724);+#3723 = CARTESIAN_POINT('',(0.,0.18));+#3724 = VECTOR('',#3725,1.);+#3725 = DIRECTION('',(-1.,0.));+#3726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3727 = ORIENTED_EDGE('',*,*,#3728,.F.);+#3728 = EDGE_CURVE('',#3729,#3701,#3731,.T.);+#3729 = VERTEX_POINT('',#3730);+#3730 = CARTESIAN_POINT('',(-3.4475,2.72,1.113397459622));+#3731 = SURFACE_CURVE('',#3732,(#3737,#3744),.PCURVE_S1.);+#3732 = CIRCLE('',#3733,0.1);+#3733 = AXIS2_PLACEMENT_3D('',#3734,#3735,#3736);+#3734 = CARTESIAN_POINT('',(-3.4975,2.72,1.2));+#3735 = DIRECTION('',(0.,1.,-0.));+#3736 = DIRECTION('',(-1.,0.,0.));+#3737 = PCURVE('',#3340,#3738);+#3738 = DEFINITIONAL_REPRESENTATION('',(#3739),#3743);+#3739 = CIRCLE('',#3740,0.1);+#3740 = AXIS2_PLACEMENT_2D('',#3741,#3742);+#3741 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#3742 = DIRECTION('',(0.,1.));+#3743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3744 = PCURVE('',#3745,#3750);+#3745 = CYLINDRICAL_SURFACE('',#3746,0.1);+#3746 = AXIS2_PLACEMENT_3D('',#3747,#3748,#3749);+#3747 = CARTESIAN_POINT('',(-3.4975,2.54,1.2));+#3748 = DIRECTION('',(0.,1.,0.));+#3749 = DIRECTION('',(-1.,-0.,-0.));+#3750 = DEFINITIONAL_REPRESENTATION('',(#3751),#3755);+#3751 = LINE('',#3752,#3753);+#3752 = CARTESIAN_POINT('',(-0.,0.18));+#3753 = VECTOR('',#3754,1.);+#3754 = DIRECTION('',(1.,-0.));+#3755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3756 = ORIENTED_EDGE('',*,*,#3757,.F.);+#3757 = EDGE_CURVE('',#3298,#3729,#3758,.T.);+#3758 = SURFACE_CURVE('',#3759,(#3763,#3770),.PCURVE_S1.);+#3759 = LINE('',#3760,#3761);+#3760 = CARTESIAN_POINT('',(-3.4475,2.72,1.223081297441E-02));+#3761 = VECTOR('',#3762,1.);+#3762 = DIRECTION('',(-0.,-0.,-1.));+#3763 = PCURVE('',#3340,#3764);+#3764 = DEFINITIONAL_REPRESENTATION('',(#3765),#3769);+#3765 = LINE('',#3766,#3767);+#3766 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#3767 = VECTOR('',#3768,1.);+#3768 = DIRECTION('',(1.,0.));+#3769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3770 = PCURVE('',#3313,#3771);+#3771 = DEFINITIONAL_REPRESENTATION('',(#3772),#3776);+#3772 = LINE('',#3773,#3774);+#3773 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#3774 = VECTOR('',#3775,1.);+#3775 = DIRECTION('',(1.,0.));+#3776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3777 = ADVANCED_FACE('',(#3778),#3313,.F.);+#3778 = FACE_BOUND('',#3779,.T.);+#3779 = EDGE_LOOP('',(#3780,#3781,#3804,#3825));+#3780 = ORIENTED_EDGE('',*,*,#3297,.F.);+#3781 = ORIENTED_EDGE('',*,*,#3782,.T.);+#3782 = EDGE_CURVE('',#3269,#3783,#3785,.T.);+#3783 = VERTEX_POINT('',#3784);+#3784 = CARTESIAN_POINT('',(-3.4475,2.36,1.113397459622));+#3785 = SURFACE_CURVE('',#3786,(#3790,#3797),.PCURVE_S1.);+#3786 = LINE('',#3787,#3788);+#3787 = CARTESIAN_POINT('',(-3.4475,2.36,1.223081297441E-02));+#3788 = VECTOR('',#3789,1.);+#3789 = DIRECTION('',(-0.,-0.,-1.));+#3790 = PCURVE('',#3313,#3791);+#3791 = DEFINITIONAL_REPRESENTATION('',(#3792),#3796);+#3792 = LINE('',#3793,#3794);+#3793 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#3794 = VECTOR('',#3795,1.);+#3795 = DIRECTION('',(1.,0.));+#3796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3797 = PCURVE('',#3285,#3798);+#3798 = DEFINITIONAL_REPRESENTATION('',(#3799),#3803);+#3799 = LINE('',#3800,#3801);+#3800 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#3801 = VECTOR('',#3802,1.);+#3802 = DIRECTION('',(1.,0.));+#3803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3804 = ORIENTED_EDGE('',*,*,#3805,.T.);+#3805 = EDGE_CURVE('',#3783,#3729,#3806,.T.);+#3806 = SURFACE_CURVE('',#3807,(#3811,#3818),.PCURVE_S1.);+#3807 = LINE('',#3808,#3809);+#3808 = CARTESIAN_POINT('',(-3.4475,2.54,1.113397459622));+#3809 = VECTOR('',#3810,1.);+#3810 = DIRECTION('',(0.,1.,0.));+#3811 = PCURVE('',#3313,#3812);+#3812 = DEFINITIONAL_REPRESENTATION('',(#3813),#3817);+#3813 = LINE('',#3814,#3815);+#3814 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#3815 = VECTOR('',#3816,1.);+#3816 = DIRECTION('',(0.,-1.));+#3817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3818 = PCURVE('',#3745,#3819);+#3819 = DEFINITIONAL_REPRESENTATION('',(#3820),#3824);+#3820 = LINE('',#3821,#3822);+#3821 = CARTESIAN_POINT('',(4.188790204786,0.));+#3822 = VECTOR('',#3823,1.);+#3823 = DIRECTION('',(0.,1.));+#3824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3825 = ORIENTED_EDGE('',*,*,#3757,.F.);+#3826 = ADVANCED_FACE('',(#3827),#3285,.F.);+#3827 = FACE_BOUND('',#3828,.T.);+#3828 = EDGE_LOOP('',(#3829,#3830,#3831,#3859,#3882,#3910,#3933,#3956,+ #3979,#4007,#4030,#4058,#4081,#4103));+#3829 = ORIENTED_EDGE('',*,*,#3268,.F.);+#3830 = ORIENTED_EDGE('',*,*,#3356,.T.);+#3831 = ORIENTED_EDGE('',*,*,#3832,.T.);+#3832 = EDGE_CURVE('',#3357,#3833,#3835,.T.);+#3833 = VERTEX_POINT('',#3834);+#3834 = CARTESIAN_POINT('',(-4.006065227246,2.36,1.159985897103));+#3835 = SURFACE_CURVE('',#3836,(#3841,#3852),.PCURVE_S1.);+#3836 = CIRCLE('',#3837,0.28);+#3837 = AXIS2_PLACEMENT_3D('',#3838,#3839,#3840);+#3838 = CARTESIAN_POINT('',(-3.763569972422,2.36,1.02));+#3839 = DIRECTION('',(0.,-1.,0.));+#3840 = DIRECTION('',(0.,0.,1.));+#3841 = PCURVE('',#3285,#3842);+#3842 = DEFINITIONAL_REPRESENTATION('',(#3843),#3851);+#3843 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3844,#3845,#3846,#3847,+#3848,#3849,#3850),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3844 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#3845 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#3846 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#3847 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#3848 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#3849 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#3850 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#3851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3852 = PCURVE('',#3395,#3853);+#3853 = DEFINITIONAL_REPRESENTATION('',(#3854),#3858);+#3854 = LINE('',#3855,#3856);+#3855 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#3856 = VECTOR('',#3857,1.);+#3857 = DIRECTION('',(-1.,0.));+#3858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3859 = ORIENTED_EDGE('',*,*,#3860,.T.);+#3860 = EDGE_CURVE('',#3833,#3861,#3863,.T.);+#3861 = VERTEX_POINT('',#3862);+#3862 = CARTESIAN_POINT('',(-4.537145669057,2.36,0.240004029399));+#3863 = SURFACE_CURVE('',#3864,(#3868,#3875),.PCURVE_S1.);+#3864 = LINE('',#3865,#3866);+#3865 = CARTESIAN_POINT('',(-3.954105448151,2.36,1.249994963251));+#3866 = VECTOR('',#3867,1.);+#3867 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#3868 = PCURVE('',#3285,#3869);+#3869 = DEFINITIONAL_REPRESENTATION('',(#3870),#3874);+#3870 = LINE('',#3871,#3872);+#3871 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#3872 = VECTOR('',#3873,1.);+#3873 = DIRECTION('',(0.866054481515,0.499949632511));+#3874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3875 = PCURVE('',#3477,#3876);+#3876 = DEFINITIONAL_REPRESENTATION('',(#3877),#3881);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(-1.,0.));+#3881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3882 = ORIENTED_EDGE('',*,*,#3883,.F.);+#3883 = EDGE_CURVE('',#3884,#3861,#3886,.T.);+#3884 = VERTEX_POINT('',#3885);+#3885 = CARTESIAN_POINT('',(-4.606430027578,2.36,0.2));+#3886 = SURFACE_CURVE('',#3887,(#3892,#3903),.PCURVE_S1.);+#3887 = CIRCLE('',#3888,8.E-02);+#3888 = AXIS2_PLACEMENT_3D('',#3889,#3890,#3891);+#3889 = CARTESIAN_POINT('',(-4.606430027578,2.36,0.28));+#3890 = DIRECTION('',(0.,-1.,0.));+#3891 = DIRECTION('',(0.,0.,1.));+#3892 = PCURVE('',#3285,#3893);+#3893 = DEFINITIONAL_REPRESENTATION('',(#3894),#3902);+#3894 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3895,#3896,#3897,#3898,+#3899,#3900,#3901),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3895 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#3896 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#3897 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#3898 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#3899 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#3900 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#3901 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#3902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3903 = PCURVE('',#3510,#3904);+#3904 = DEFINITIONAL_REPRESENTATION('',(#3905),#3909);+#3905 = LINE('',#3906,#3907);+#3906 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#3907 = VECTOR('',#3908,1.);+#3908 = DIRECTION('',(-1.,0.));+#3909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3910 = ORIENTED_EDGE('',*,*,#3911,.T.);+#3911 = EDGE_CURVE('',#3884,#3912,#3914,.T.);+#3912 = VERTEX_POINT('',#3913);+#3913 = CARTESIAN_POINT('',(-5.255,2.36,0.2));+#3914 = SURFACE_CURVE('',#3915,(#3919,#3926),.PCURVE_S1.);+#3915 = LINE('',#3916,#3917);+#3916 = CARTESIAN_POINT('',(-4.5025,2.36,0.2));+#3917 = VECTOR('',#3918,1.);+#3918 = DIRECTION('',(-1.,-0.,-0.));+#3919 = PCURVE('',#3285,#3920);+#3920 = DEFINITIONAL_REPRESENTATION('',(#3921),#3925);+#3921 = LINE('',#3922,#3923);+#3922 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#3923 = VECTOR('',#3924,1.);+#3924 = DIRECTION('',(-0.,1.));+#3925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3926 = PCURVE('',#3538,#3927);+#3927 = DEFINITIONAL_REPRESENTATION('',(#3928),#3932);+#3928 = LINE('',#3929,#3930);+#3929 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#3930 = VECTOR('',#3931,1.);+#3931 = DIRECTION('',(-1.,0.));+#3932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3933 = ORIENTED_EDGE('',*,*,#3934,.T.);+#3934 = EDGE_CURVE('',#3912,#3935,#3937,.T.);+#3935 = VERTEX_POINT('',#3936);+#3936 = CARTESIAN_POINT('',(-5.255,2.36,0.));+#3937 = SURFACE_CURVE('',#3938,(#3942,#3949),.PCURVE_S1.);+#3938 = LINE('',#3939,#3940);+#3939 = CARTESIAN_POINT('',(-5.255,2.36,1.223081297441E-02));+#3940 = VECTOR('',#3941,1.);+#3941 = DIRECTION('',(-0.,-0.,-1.));+#3942 = PCURVE('',#3285,#3943);+#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3948);+#3944 = LINE('',#3945,#3946);+#3945 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#3946 = VECTOR('',#3947,1.);+#3947 = DIRECTION('',(1.,0.));+#3948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3949 = PCURVE('',#3566,#3950);+#3950 = DEFINITIONAL_REPRESENTATION('',(#3951),#3955);+#3951 = LINE('',#3952,#3953);+#3952 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#3953 = VECTOR('',#3954,1.);+#3954 = DIRECTION('',(1.,0.));+#3955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3956 = ORIENTED_EDGE('',*,*,#3957,.F.);+#3957 = EDGE_CURVE('',#3958,#3935,#3960,.T.);+#3958 = VERTEX_POINT('',#3959);+#3959 = CARTESIAN_POINT('',(-4.606430027578,2.36,-5.551115123126E-17));+#3960 = SURFACE_CURVE('',#3961,(#3965,#3972),.PCURVE_S1.);+#3961 = LINE('',#3962,#3963);+#3962 = CARTESIAN_POINT('',(-4.5025,2.36,0.));+#3963 = VECTOR('',#3964,1.);+#3964 = DIRECTION('',(-1.,-0.,-0.));+#3965 = PCURVE('',#3285,#3966);+#3966 = DEFINITIONAL_REPRESENTATION('',(#3967),#3971);+#3967 = LINE('',#3968,#3969);+#3968 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#3969 = VECTOR('',#3970,1.);+#3970 = DIRECTION('',(-0.,1.));+#3971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3972 = PCURVE('',#3594,#3973);+#3973 = DEFINITIONAL_REPRESENTATION('',(#3974),#3978);+#3974 = LINE('',#3975,#3976);+#3975 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#3976 = VECTOR('',#3977,1.);+#3977 = DIRECTION('',(-1.,0.));+#3978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3979 = ORIENTED_EDGE('',*,*,#3980,.T.);+#3980 = EDGE_CURVE('',#3958,#3981,#3983,.T.);+#3981 = VERTEX_POINT('',#3982);+#3982 = CARTESIAN_POINT('',(-4.363934772754,2.36,0.140014102897));+#3983 = SURFACE_CURVE('',#3984,(#3989,#4000),.PCURVE_S1.);+#3984 = CIRCLE('',#3985,0.28);+#3985 = AXIS2_PLACEMENT_3D('',#3986,#3987,#3988);+#3986 = CARTESIAN_POINT('',(-4.606430027578,2.36,0.28));+#3987 = DIRECTION('',(0.,-1.,0.));+#3988 = DIRECTION('',(0.,0.,1.));+#3989 = PCURVE('',#3285,#3990);+#3990 = DEFINITIONAL_REPRESENTATION('',(#3991),#3999);+#3991 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3992,#3993,#3994,#3995,+#3996,#3997,#3998),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3992 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#3993 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#3994 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#3995 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#3996 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#3997 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#3998 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#3999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4000 = PCURVE('',#3627,#4001);+#4001 = DEFINITIONAL_REPRESENTATION('',(#4002),#4006);+#4002 = LINE('',#4003,#4004);+#4003 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#4004 = VECTOR('',#4005,1.);+#4005 = DIRECTION('',(-1.,0.));+#4006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4007 = ORIENTED_EDGE('',*,*,#4008,.F.);+#4008 = EDGE_CURVE('',#4009,#3981,#4011,.T.);+#4009 = VERTEX_POINT('',#4010);+#4010 = CARTESIAN_POINT('',(-3.832854330943,2.36,1.059995970601));+#4011 = SURFACE_CURVE('',#4012,(#4016,#4023),.PCURVE_S1.);+#4012 = LINE('',#4013,#4014);+#4013 = CARTESIAN_POINT('',(-3.780894551849,2.36,1.150005036749));+#4014 = VECTOR('',#4015,1.);+#4015 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#4016 = PCURVE('',#3285,#4017);+#4017 = DEFINITIONAL_REPRESENTATION('',(#4018),#4022);+#4018 = LINE('',#4019,#4020);+#4019 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#4020 = VECTOR('',#4021,1.);+#4021 = DIRECTION('',(0.866054481515,0.499949632511));+#4022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4023 = PCURVE('',#3655,#4024);+#4024 = DEFINITIONAL_REPRESENTATION('',(#4025),#4029);+#4025 = LINE('',#4026,#4027);+#4026 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#4027 = VECTOR('',#4028,1.);+#4028 = DIRECTION('',(-1.,0.));+#4029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4030 = ORIENTED_EDGE('',*,*,#4031,.F.);+#4031 = EDGE_CURVE('',#4032,#4009,#4034,.T.);+#4032 = VERTEX_POINT('',#4033);+#4033 = CARTESIAN_POINT('',(-3.763569972422,2.36,1.1));+#4034 = SURFACE_CURVE('',#4035,(#4040,#4051),.PCURVE_S1.);+#4035 = CIRCLE('',#4036,8.E-02);+#4036 = AXIS2_PLACEMENT_3D('',#4037,#4038,#4039);+#4037 = CARTESIAN_POINT('',(-3.763569972422,2.36,1.02));+#4038 = DIRECTION('',(0.,-1.,0.));+#4039 = DIRECTION('',(0.,0.,1.));+#4040 = PCURVE('',#3285,#4041);+#4041 = DEFINITIONAL_REPRESENTATION('',(#4042),#4050);+#4042 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4043,#4044,#4045,#4046,+#4047,#4048,#4049),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4043 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#4044 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#4045 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#4046 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#4047 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#4048 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#4049 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#4050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4051 = PCURVE('',#3688,#4052);+#4052 = DEFINITIONAL_REPRESENTATION('',(#4053),#4057);+#4053 = LINE('',#4054,#4055);+#4054 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#4055 = VECTOR('',#4056,1.);+#4056 = DIRECTION('',(-1.,0.));+#4057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4058 = ORIENTED_EDGE('',*,*,#4059,.F.);+#4059 = EDGE_CURVE('',#4060,#4032,#4062,.T.);+#4060 = VERTEX_POINT('',#4061);+#4061 = CARTESIAN_POINT('',(-3.4975,2.36,1.1));+#4062 = SURFACE_CURVE('',#4063,(#4067,#4074),.PCURVE_S1.);+#4063 = LINE('',#4064,#4065);+#4064 = CARTESIAN_POINT('',(-3.4975,2.36,1.1));+#4065 = VECTOR('',#4066,1.);+#4066 = DIRECTION('',(-1.,-0.,-0.));+#4067 = PCURVE('',#3285,#4068);+#4068 = DEFINITIONAL_REPRESENTATION('',(#4069),#4073);+#4069 = LINE('',#4070,#4071);+#4070 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#4071 = VECTOR('',#4072,1.);+#4072 = DIRECTION('',(-0.,1.));+#4073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4074 = PCURVE('',#3716,#4075);+#4075 = DEFINITIONAL_REPRESENTATION('',(#4076),#4080);+#4076 = LINE('',#4077,#4078);+#4077 = CARTESIAN_POINT('',(0.,-0.18));+#4078 = VECTOR('',#4079,1.);+#4079 = DIRECTION('',(-1.,0.));+#4080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4081 = ORIENTED_EDGE('',*,*,#4082,.F.);+#4082 = EDGE_CURVE('',#3783,#4060,#4083,.T.);+#4083 = SURFACE_CURVE('',#4084,(#4089,#4096),.PCURVE_S1.);+#4084 = CIRCLE('',#4085,0.1);+#4085 = AXIS2_PLACEMENT_3D('',#4086,#4087,#4088);+#4086 = CARTESIAN_POINT('',(-3.4975,2.36,1.2));+#4087 = DIRECTION('',(0.,1.,-0.));+#4088 = DIRECTION('',(-1.,0.,0.));+#4089 = PCURVE('',#3285,#4090);+#4090 = DEFINITIONAL_REPRESENTATION('',(#4091),#4095);+#4091 = CIRCLE('',#4092,0.1);+#4092 = AXIS2_PLACEMENT_2D('',#4093,#4094);+#4093 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#4094 = DIRECTION('',(0.,1.));+#4095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4096 = PCURVE('',#3745,#4097);+#4097 = DEFINITIONAL_REPRESENTATION('',(#4098),#4102);+#4098 = LINE('',#4099,#4100);+#4099 = CARTESIAN_POINT('',(0.,-0.18));+#4100 = VECTOR('',#4101,1.);+#4101 = DIRECTION('',(1.,0.));+#4102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4103 = ORIENTED_EDGE('',*,*,#3782,.F.);+#4104 = ADVANCED_FACE('',(#4105),#3395,.T.);+#4105 = FACE_BOUND('',#4106,.T.);+#4106 = EDGE_LOOP('',(#4107,#4108,#4129,#4130));+#4107 = ORIENTED_EDGE('',*,*,#3433,.T.);+#4108 = ORIENTED_EDGE('',*,*,#4109,.F.);+#4109 = EDGE_CURVE('',#3833,#3434,#4110,.T.);+#4110 = SURFACE_CURVE('',#4111,(#4115,#4122),.PCURVE_S1.);+#4111 = LINE('',#4112,#4113);+#4112 = CARTESIAN_POINT('',(-4.006065227246,2.36,1.159985897103));+#4113 = VECTOR('',#4114,1.);+#4114 = DIRECTION('',(0.,1.,0.));+#4115 = PCURVE('',#3395,#4116);+#4116 = DEFINITIONAL_REPRESENTATION('',(#4117),#4121);+#4117 = LINE('',#4118,#4119);+#4118 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#4119 = VECTOR('',#4120,1.);+#4120 = DIRECTION('',(0.,1.));+#4121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4122 = PCURVE('',#3477,#4123);+#4123 = DEFINITIONAL_REPRESENTATION('',(#4124),#4128);+#4124 = LINE('',#4125,#4126);+#4125 = CARTESIAN_POINT('',(0.,-0.18));+#4126 = VECTOR('',#4127,1.);+#4127 = DIRECTION('',(0.,1.));+#4128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4129 = ORIENTED_EDGE('',*,*,#3832,.F.);+#4130 = ORIENTED_EDGE('',*,*,#3379,.T.);+#4131 = ADVANCED_FACE('',(#4132),#3745,.T.);+#4132 = FACE_BOUND('',#4133,.T.);+#4133 = EDGE_LOOP('',(#4134,#4135,#4136,#4157));+#4134 = ORIENTED_EDGE('',*,*,#3805,.F.);+#4135 = ORIENTED_EDGE('',*,*,#4082,.T.);+#4136 = ORIENTED_EDGE('',*,*,#4137,.F.);+#4137 = EDGE_CURVE('',#3701,#4060,#4138,.T.);+#4138 = SURFACE_CURVE('',#4139,(#4143,#4150),.PCURVE_S1.);+#4139 = LINE('',#4140,#4141);+#4140 = CARTESIAN_POINT('',(-3.4975,2.72,1.1));+#4141 = VECTOR('',#4142,1.);+#4142 = DIRECTION('',(-0.,-1.,-0.));+#4143 = PCURVE('',#3745,#4144);+#4144 = DEFINITIONAL_REPRESENTATION('',(#4145),#4149);+#4145 = LINE('',#4146,#4147);+#4146 = CARTESIAN_POINT('',(4.712388980385,0.18));+#4147 = VECTOR('',#4148,1.);+#4148 = DIRECTION('',(0.,-1.));+#4149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4150 = PCURVE('',#3716,#4151);+#4151 = DEFINITIONAL_REPRESENTATION('',(#4152),#4156);+#4152 = LINE('',#4153,#4154);+#4153 = CARTESIAN_POINT('',(0.,0.18));+#4154 = VECTOR('',#4155,1.);+#4155 = DIRECTION('',(0.,-1.));+#4156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4157 = ORIENTED_EDGE('',*,*,#3728,.F.);+#4158 = ADVANCED_FACE('',(#4159),#3716,.F.);+#4159 = FACE_BOUND('',#4160,.T.);+#4160 = EDGE_LOOP('',(#4161,#4162,#4183,#4184));+#4161 = ORIENTED_EDGE('',*,*,#4059,.T.);+#4162 = ORIENTED_EDGE('',*,*,#4163,.F.);+#4163 = EDGE_CURVE('',#3668,#4032,#4164,.T.);+#4164 = SURFACE_CURVE('',#4165,(#4169,#4176),.PCURVE_S1.);+#4165 = LINE('',#4166,#4167);+#4166 = CARTESIAN_POINT('',(-3.763569972422,2.72,1.1));+#4167 = VECTOR('',#4168,1.);+#4168 = DIRECTION('',(-0.,-1.,-0.));+#4169 = PCURVE('',#3716,#4170);+#4170 = DEFINITIONAL_REPRESENTATION('',(#4171),#4175);+#4171 = LINE('',#4172,#4173);+#4172 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#4173 = VECTOR('',#4174,1.);+#4174 = DIRECTION('',(0.,-1.));+#4175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4176 = PCURVE('',#3688,#4177);+#4177 = DEFINITIONAL_REPRESENTATION('',(#4178),#4182);+#4178 = LINE('',#4179,#4180);+#4179 = CARTESIAN_POINT('',(6.28318530718,0.18));+#4180 = VECTOR('',#4181,1.);+#4181 = DIRECTION('',(-0.,-1.));+#4182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4183 = ORIENTED_EDGE('',*,*,#3700,.F.);+#4184 = ORIENTED_EDGE('',*,*,#4137,.T.);+#4185 = ADVANCED_FACE('',(#4186),#3688,.F.);+#4186 = FACE_BOUND('',#4187,.F.);+#4187 = EDGE_LOOP('',(#4188,#4189,#4190,#4211));+#4188 = ORIENTED_EDGE('',*,*,#4163,.F.);+#4189 = ORIENTED_EDGE('',*,*,#3667,.T.);+#4190 = ORIENTED_EDGE('',*,*,#4191,.T.);+#4191 = EDGE_CURVE('',#3640,#4009,#4192,.T.);+#4192 = SURFACE_CURVE('',#4193,(#4197,#4204),.PCURVE_S1.);+#4193 = LINE('',#4194,#4195);+#4194 = CARTESIAN_POINT('',(-3.832854330943,2.72,1.059995970601));+#4195 = VECTOR('',#4196,1.);+#4196 = DIRECTION('',(-0.,-1.,-0.));+#4197 = PCURVE('',#3688,#4198);+#4198 = DEFINITIONAL_REPRESENTATION('',(#4199),#4203);+#4199 = LINE('',#4200,#4201);+#4200 = CARTESIAN_POINT('',(5.235929597593,0.18));+#4201 = VECTOR('',#4202,1.);+#4202 = DIRECTION('',(-0.,-1.));+#4203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4204 = PCURVE('',#3655,#4205);+#4205 = DEFINITIONAL_REPRESENTATION('',(#4206),#4210);+#4206 = LINE('',#4207,#4208);+#4207 = CARTESIAN_POINT('',(0.,0.18));+#4208 = VECTOR('',#4209,1.);+#4209 = DIRECTION('',(0.,-1.));+#4210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4211 = ORIENTED_EDGE('',*,*,#4031,.F.);+#4212 = ADVANCED_FACE('',(#4213),#3655,.F.);+#4213 = FACE_BOUND('',#4214,.T.);+#4214 = EDGE_LOOP('',(#4215,#4216,#4237,#4238));+#4215 = ORIENTED_EDGE('',*,*,#4008,.T.);+#4216 = ORIENTED_EDGE('',*,*,#4217,.F.);+#4217 = EDGE_CURVE('',#3607,#3981,#4218,.T.);+#4218 = SURFACE_CURVE('',#4219,(#4223,#4230),.PCURVE_S1.);+#4219 = LINE('',#4220,#4221);+#4220 = CARTESIAN_POINT('',(-4.363934772754,2.72,0.140014102897));+#4221 = VECTOR('',#4222,1.);+#4222 = DIRECTION('',(-0.,-1.,-0.));+#4223 = PCURVE('',#3655,#4224);+#4224 = DEFINITIONAL_REPRESENTATION('',(#4225),#4229);+#4225 = LINE('',#4226,#4227);+#4226 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#4227 = VECTOR('',#4228,1.);+#4228 = DIRECTION('',(0.,-1.));+#4229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4230 = PCURVE('',#3627,#4231);+#4231 = DEFINITIONAL_REPRESENTATION('',(#4232),#4236);+#4232 = LINE('',#4233,#4234);+#4233 = CARTESIAN_POINT('',(2.094336944003,0.18));+#4234 = VECTOR('',#4235,1.);+#4235 = DIRECTION('',(-0.,-1.));+#4236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4237 = ORIENTED_EDGE('',*,*,#3639,.F.);+#4238 = ORIENTED_EDGE('',*,*,#4191,.T.);+#4239 = ADVANCED_FACE('',(#4240),#3627,.T.);+#4240 = FACE_BOUND('',#4241,.T.);+#4241 = EDGE_LOOP('',(#4242,#4263,#4264,#4265));+#4242 = ORIENTED_EDGE('',*,*,#4243,.F.);+#4243 = EDGE_CURVE('',#3579,#3958,#4244,.T.);+#4244 = SURFACE_CURVE('',#4245,(#4249,#4256),.PCURVE_S1.);+#4245 = LINE('',#4246,#4247);+#4246 = CARTESIAN_POINT('',(-4.606430027578,2.72,-5.551115123126E-17));+#4247 = VECTOR('',#4248,1.);+#4248 = DIRECTION('',(-0.,-1.,-0.));+#4249 = PCURVE('',#3627,#4250);+#4250 = DEFINITIONAL_REPRESENTATION('',(#4251),#4255);+#4251 = LINE('',#4252,#4253);+#4252 = CARTESIAN_POINT('',(3.14159265359,0.18));+#4253 = VECTOR('',#4254,1.);+#4254 = DIRECTION('',(-0.,-1.));+#4255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4256 = PCURVE('',#3594,#4257);+#4257 = DEFINITIONAL_REPRESENTATION('',(#4258),#4262);+#4258 = LINE('',#4259,#4260);+#4259 = CARTESIAN_POINT('',(0.,0.18));+#4260 = VECTOR('',#4261,1.);+#4261 = DIRECTION('',(0.,-1.));+#4262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4263 = ORIENTED_EDGE('',*,*,#3606,.T.);+#4264 = ORIENTED_EDGE('',*,*,#4217,.T.);+#4265 = ORIENTED_EDGE('',*,*,#3980,.F.);+#4266 = ADVANCED_FACE('',(#4267),#3594,.F.);+#4267 = FACE_BOUND('',#4268,.T.);+#4268 = EDGE_LOOP('',(#4269,#4270,#4271,#4292));+#4269 = ORIENTED_EDGE('',*,*,#4243,.T.);+#4270 = ORIENTED_EDGE('',*,*,#3957,.T.);+#4271 = ORIENTED_EDGE('',*,*,#4272,.T.);+#4272 = EDGE_CURVE('',#3935,#3551,#4273,.T.);+#4273 = SURFACE_CURVE('',#4274,(#4278,#4285),.PCURVE_S1.);+#4274 = LINE('',#4275,#4276);+#4275 = CARTESIAN_POINT('',(-5.255,2.2,0.));+#4276 = VECTOR('',#4277,1.);+#4277 = DIRECTION('',(0.,1.,0.));+#4278 = PCURVE('',#3594,#4279);+#4279 = DEFINITIONAL_REPRESENTATION('',(#4280),#4284);+#4280 = LINE('',#4281,#4282);+#4281 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#4282 = VECTOR('',#4283,1.);+#4283 = DIRECTION('',(0.,1.));+#4284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4285 = PCURVE('',#3566,#4286);+#4286 = DEFINITIONAL_REPRESENTATION('',(#4287),#4291);+#4287 = LINE('',#4288,#4289);+#4288 = CARTESIAN_POINT('',(-0.5,-0.34));+#4289 = VECTOR('',#4290,1.);+#4290 = DIRECTION('',(0.,-1.));+#4291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4292 = ORIENTED_EDGE('',*,*,#3578,.F.);+#4293 = ADVANCED_FACE('',(#4294),#3566,.T.);+#4294 = FACE_BOUND('',#4295,.F.);+#4295 = EDGE_LOOP('',(#4296,#4317,#4318,#4319));+#4296 = ORIENTED_EDGE('',*,*,#4297,.F.);+#4297 = EDGE_CURVE('',#3912,#3523,#4298,.T.);+#4298 = SURFACE_CURVE('',#4299,(#4303,#4310),.PCURVE_S1.);+#4299 = LINE('',#4300,#4301);+#4300 = CARTESIAN_POINT('',(-5.255,2.2,0.2));+#4301 = VECTOR('',#4302,1.);+#4302 = DIRECTION('',(0.,1.,0.));+#4303 = PCURVE('',#3566,#4304);+#4304 = DEFINITIONAL_REPRESENTATION('',(#4305),#4309);+#4305 = LINE('',#4306,#4307);+#4306 = CARTESIAN_POINT('',(-0.7,-0.34));+#4307 = VECTOR('',#4308,1.);+#4308 = DIRECTION('',(0.,-1.));+#4309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4310 = PCURVE('',#3538,#4311);+#4311 = DEFINITIONAL_REPRESENTATION('',(#4312),#4316);+#4312 = LINE('',#4313,#4314);+#4313 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#4314 = VECTOR('',#4315,1.);+#4315 = DIRECTION('',(0.,1.));+#4316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4317 = ORIENTED_EDGE('',*,*,#3934,.T.);+#4318 = ORIENTED_EDGE('',*,*,#4272,.T.);+#4319 = ORIENTED_EDGE('',*,*,#3550,.F.);+#4320 = ADVANCED_FACE('',(#4321),#3538,.T.);+#4321 = FACE_BOUND('',#4322,.F.);+#4322 = EDGE_LOOP('',(#4323,#4344,#4345,#4346));+#4323 = ORIENTED_EDGE('',*,*,#4324,.T.);+#4324 = EDGE_CURVE('',#3490,#3884,#4325,.T.);+#4325 = SURFACE_CURVE('',#4326,(#4330,#4337),.PCURVE_S1.);+#4326 = LINE('',#4327,#4328);+#4327 = CARTESIAN_POINT('',(-4.606430027578,2.72,0.2));+#4328 = VECTOR('',#4329,1.);+#4329 = DIRECTION('',(-0.,-1.,-0.));+#4330 = PCURVE('',#3538,#4331);+#4331 = DEFINITIONAL_REPRESENTATION('',(#4332),#4336);+#4332 = LINE('',#4333,#4334);+#4333 = CARTESIAN_POINT('',(0.,0.18));+#4334 = VECTOR('',#4335,1.);+#4335 = DIRECTION('',(0.,-1.));+#4336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4337 = PCURVE('',#3510,#4338);+#4338 = DEFINITIONAL_REPRESENTATION('',(#4339),#4343);+#4339 = LINE('',#4340,#4341);+#4340 = CARTESIAN_POINT('',(3.14159265359,0.18));+#4341 = VECTOR('',#4342,1.);+#4342 = DIRECTION('',(-0.,-1.));+#4343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4344 = ORIENTED_EDGE('',*,*,#3911,.T.);+#4345 = ORIENTED_EDGE('',*,*,#4297,.T.);+#4346 = ORIENTED_EDGE('',*,*,#3522,.F.);+#4347 = ADVANCED_FACE('',(#4348),#3510,.F.);+#4348 = FACE_BOUND('',#4349,.F.);+#4349 = EDGE_LOOP('',(#4350,#4351,#4352,#4373));+#4350 = ORIENTED_EDGE('',*,*,#4324,.F.);+#4351 = ORIENTED_EDGE('',*,*,#3489,.T.);+#4352 = ORIENTED_EDGE('',*,*,#4353,.T.);+#4353 = EDGE_CURVE('',#3462,#3861,#4354,.T.);+#4354 = SURFACE_CURVE('',#4355,(#4359,#4366),.PCURVE_S1.);+#4355 = LINE('',#4356,#4357);+#4356 = CARTESIAN_POINT('',(-4.537145669057,2.72,0.240004029399));+#4357 = VECTOR('',#4358,1.);+#4358 = DIRECTION('',(-0.,-1.,-0.));+#4359 = PCURVE('',#3510,#4360);+#4360 = DEFINITIONAL_REPRESENTATION('',(#4361),#4365);+#4361 = LINE('',#4362,#4363);+#4362 = CARTESIAN_POINT('',(2.094336944003,0.18));+#4363 = VECTOR('',#4364,1.);+#4364 = DIRECTION('',(-0.,-1.));+#4365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4366 = PCURVE('',#3477,#4367);+#4367 = DEFINITIONAL_REPRESENTATION('',(#4368),#4372);+#4368 = LINE('',#4369,#4370);+#4369 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#4370 = VECTOR('',#4371,1.);+#4371 = DIRECTION('',(0.,-1.));+#4372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4373 = ORIENTED_EDGE('',*,*,#3883,.F.);+#4374 = ADVANCED_FACE('',(#4375),#3477,.T.);+#4375 = FACE_BOUND('',#4376,.F.);+#4376 = EDGE_LOOP('',(#4377,#4378,#4379,#4380));+#4377 = ORIENTED_EDGE('',*,*,#4109,.F.);+#4378 = ORIENTED_EDGE('',*,*,#3860,.T.);+#4379 = ORIENTED_EDGE('',*,*,#4353,.F.);+#4380 = ORIENTED_EDGE('',*,*,#3461,.F.);+#4381 = MANIFOLD_SOLID_BREP('',#4382);+#4382 = CLOSED_SHELL('',(#4383,#4505,#4581,#4931,#4980,#5258,#5285,#5312+ ,#5339,#5366,#5393,#5420,#5447,#5474,#5501,#5528));+#4383 = ADVANCED_FACE('',(#4384),#4398,.T.);+#4384 = FACE_BOUND('',#4385,.T.);+#4385 = EDGE_LOOP('',(#4386,#4421,#4450,#4478));+#4386 = ORIENTED_EDGE('',*,*,#4387,.F.);+#4387 = EDGE_CURVE('',#4388,#4390,#4392,.T.);+#4388 = VERTEX_POINT('',#4389);+#4389 = CARTESIAN_POINT('',(-3.4975,1.09,1.3));+#4390 = VERTEX_POINT('',#4391);+#4391 = CARTESIAN_POINT('',(-3.4975,1.45,1.3));+#4392 = SURFACE_CURVE('',#4393,(#4397,#4409),.PCURVE_S1.);+#4393 = LINE('',#4394,#4395);+#4394 = CARTESIAN_POINT('',(-3.4975,1.09,1.3));+#4395 = VECTOR('',#4396,1.);+#4396 = DIRECTION('',(0.,1.,0.));+#4397 = PCURVE('',#4398,#4403);+#4398 = CYLINDRICAL_SURFACE('',#4399,0.1);+#4399 = AXIS2_PLACEMENT_3D('',#4400,#4401,#4402);+#4400 = CARTESIAN_POINT('',(-3.4975,1.27,1.2));+#4401 = DIRECTION('',(0.,1.,0.));+#4402 = DIRECTION('',(-1.,-0.,-0.));+#4403 = DEFINITIONAL_REPRESENTATION('',(#4404),#4408);+#4404 = LINE('',#4405,#4406);+#4405 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#4406 = VECTOR('',#4407,1.);+#4407 = DIRECTION('',(-0.,1.));+#4408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4409 = PCURVE('',#4410,#4415);+#4410 = PLANE('',#4411);+#4411 = AXIS2_PLACEMENT_3D('',#4412,#4413,#4414);+#4412 = CARTESIAN_POINT('',(-3.4975,1.27,1.3));+#4413 = DIRECTION('',(0.,0.,1.));+#4414 = DIRECTION('',(1.,0.,0.));+#4415 = DEFINITIONAL_REPRESENTATION('',(#4416),#4420);+#4416 = LINE('',#4417,#4418);+#4417 = CARTESIAN_POINT('',(0.,-0.18));+#4418 = VECTOR('',#4419,1.);+#4419 = DIRECTION('',(0.,1.));+#4420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4421 = ORIENTED_EDGE('',*,*,#4422,.T.);+#4422 = EDGE_CURVE('',#4388,#4423,#4425,.T.);+#4423 = VERTEX_POINT('',#4424);+#4424 = CARTESIAN_POINT('',(-3.4475,1.09,1.286602540378));+#4425 = SURFACE_CURVE('',#4426,(#4431,#4438),.PCURVE_S1.);+#4426 = CIRCLE('',#4427,0.1);+#4427 = AXIS2_PLACEMENT_3D('',#4428,#4429,#4430);+#4428 = CARTESIAN_POINT('',(-3.4975,1.09,1.2));+#4429 = DIRECTION('',(0.,1.,-0.));+#4430 = DIRECTION('',(-1.,0.,0.));+#4431 = PCURVE('',#4398,#4432);+#4432 = DEFINITIONAL_REPRESENTATION('',(#4433),#4437);+#4433 = LINE('',#4434,#4435);+#4434 = CARTESIAN_POINT('',(0.,-0.18));+#4435 = VECTOR('',#4436,1.);+#4436 = DIRECTION('',(1.,0.));+#4437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4438 = PCURVE('',#4439,#4444);+#4439 = PLANE('',#4440);+#4440 = AXIS2_PLACEMENT_3D('',#4441,#4442,#4443);+#4441 = CARTESIAN_POINT('',(-4.408401242914,1.09,0.524461625949));+#4442 = DIRECTION('',(0.,1.,0.));+#4443 = DIRECTION('',(0.,0.,-1.));+#4444 = DEFINITIONAL_REPRESENTATION('',(#4445),#4449);+#4445 = CIRCLE('',#4446,0.1);+#4446 = AXIS2_PLACEMENT_2D('',#4447,#4448);+#4447 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#4448 = DIRECTION('',(0.,1.));+#4449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4450 = ORIENTED_EDGE('',*,*,#4451,.T.);+#4451 = EDGE_CURVE('',#4423,#4452,#4454,.T.);+#4452 = VERTEX_POINT('',#4453);+#4453 = CARTESIAN_POINT('',(-3.4475,1.45,1.286602540378));+#4454 = SURFACE_CURVE('',#4455,(#4459,#4466),.PCURVE_S1.);+#4455 = LINE('',#4456,#4457);+#4456 = CARTESIAN_POINT('',(-3.4475,1.27,1.286602540378));+#4457 = VECTOR('',#4458,1.);+#4458 = DIRECTION('',(0.,1.,0.));+#4459 = PCURVE('',#4398,#4460);+#4460 = DEFINITIONAL_REPRESENTATION('',(#4461),#4465);+#4461 = LINE('',#4462,#4463);+#4462 = CARTESIAN_POINT('',(2.094395102393,0.));+#4463 = VECTOR('',#4464,1.);+#4464 = DIRECTION('',(0.,1.));+#4465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4466 = PCURVE('',#4467,#4472);+#4467 = PLANE('',#4468);+#4468 = AXIS2_PLACEMENT_3D('',#4469,#4470,#4471);+#4469 = CARTESIAN_POINT('',(-3.4475,0.59,-0.5));+#4470 = DIRECTION('',(-1.,0.,0.));+#4471 = DIRECTION('',(0.,0.,-1.));+#4472 = DEFINITIONAL_REPRESENTATION('',(#4473),#4477);+#4473 = LINE('',#4474,#4475);+#4474 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#4475 = VECTOR('',#4476,1.);+#4476 = DIRECTION('',(0.,-1.));+#4477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4478 = ORIENTED_EDGE('',*,*,#4479,.F.);+#4479 = EDGE_CURVE('',#4390,#4452,#4480,.T.);+#4480 = SURFACE_CURVE('',#4481,(#4486,#4493),.PCURVE_S1.);+#4481 = CIRCLE('',#4482,0.1);+#4482 = AXIS2_PLACEMENT_3D('',#4483,#4484,#4485);+#4483 = CARTESIAN_POINT('',(-3.4975,1.45,1.2));+#4484 = DIRECTION('',(0.,1.,-0.));+#4485 = DIRECTION('',(-1.,0.,0.));+#4486 = PCURVE('',#4398,#4487);+#4487 = DEFINITIONAL_REPRESENTATION('',(#4488),#4492);+#4488 = LINE('',#4489,#4490);+#4489 = CARTESIAN_POINT('',(-0.,0.18));+#4490 = VECTOR('',#4491,1.);+#4491 = DIRECTION('',(1.,-0.));+#4492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4493 = PCURVE('',#4494,#4499);+#4494 = PLANE('',#4495);+#4495 = AXIS2_PLACEMENT_3D('',#4496,#4497,#4498);+#4496 = CARTESIAN_POINT('',(-4.408401242914,1.45,0.524461625949));+#4497 = DIRECTION('',(0.,1.,0.));+#4498 = DIRECTION('',(0.,0.,-1.));+#4499 = DEFINITIONAL_REPRESENTATION('',(#4500),#4504);+#4500 = CIRCLE('',#4501,0.1);+#4501 = AXIS2_PLACEMENT_2D('',#4502,#4503);+#4502 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#4503 = DIRECTION('',(0.,1.));+#4504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4505 = ADVANCED_FACE('',(#4506),#4410,.T.);+#4506 = FACE_BOUND('',#4507,.F.);+#4507 = EDGE_LOOP('',(#4508,#4509,#4532,#4560));+#4508 = ORIENTED_EDGE('',*,*,#4387,.F.);+#4509 = ORIENTED_EDGE('',*,*,#4510,.T.);+#4510 = EDGE_CURVE('',#4388,#4511,#4513,.T.);+#4511 = VERTEX_POINT('',#4512);+#4512 = CARTESIAN_POINT('',(-3.763569972422,1.09,1.3));+#4513 = SURFACE_CURVE('',#4514,(#4518,#4525),.PCURVE_S1.);+#4514 = LINE('',#4515,#4516);+#4515 = CARTESIAN_POINT('',(-3.4975,1.09,1.3));+#4516 = VECTOR('',#4517,1.);+#4517 = DIRECTION('',(-1.,-0.,-0.));+#4518 = PCURVE('',#4410,#4519);+#4519 = DEFINITIONAL_REPRESENTATION('',(#4520),#4524);+#4520 = LINE('',#4521,#4522);+#4521 = CARTESIAN_POINT('',(0.,-0.18));+#4522 = VECTOR('',#4523,1.);+#4523 = DIRECTION('',(-1.,0.));+#4524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4525 = PCURVE('',#4439,#4526);+#4526 = DEFINITIONAL_REPRESENTATION('',(#4527),#4531);+#4527 = LINE('',#4528,#4529);+#4528 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#4529 = VECTOR('',#4530,1.);+#4530 = DIRECTION('',(-0.,1.));+#4531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4532 = ORIENTED_EDGE('',*,*,#4533,.T.);+#4533 = EDGE_CURVE('',#4511,#4534,#4536,.T.);+#4534 = VERTEX_POINT('',#4535);+#4535 = CARTESIAN_POINT('',(-3.763569972422,1.45,1.3));+#4536 = SURFACE_CURVE('',#4537,(#4541,#4548),.PCURVE_S1.);+#4537 = LINE('',#4538,#4539);+#4538 = CARTESIAN_POINT('',(-3.763569972422,1.09,1.3));+#4539 = VECTOR('',#4540,1.);+#4540 = DIRECTION('',(0.,1.,0.));+#4541 = PCURVE('',#4410,#4542);+#4542 = DEFINITIONAL_REPRESENTATION('',(#4543),#4547);+#4543 = LINE('',#4544,#4545);+#4544 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#4545 = VECTOR('',#4546,1.);+#4546 = DIRECTION('',(0.,1.));+#4547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4548 = PCURVE('',#4549,#4554);+#4549 = CYLINDRICAL_SURFACE('',#4550,0.28);+#4550 = AXIS2_PLACEMENT_3D('',#4551,#4552,#4553);+#4551 = CARTESIAN_POINT('',(-3.763569972422,1.27,1.02));+#4552 = DIRECTION('',(0.,1.,0.));+#4553 = DIRECTION('',(0.,0.,1.));+#4554 = DEFINITIONAL_REPRESENTATION('',(#4555),#4559);+#4555 = LINE('',#4556,#4557);+#4556 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#4557 = VECTOR('',#4558,1.);+#4558 = DIRECTION('',(0.,1.));+#4559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4560 = ORIENTED_EDGE('',*,*,#4561,.F.);+#4561 = EDGE_CURVE('',#4390,#4534,#4562,.T.);+#4562 = SURFACE_CURVE('',#4563,(#4567,#4574),.PCURVE_S1.);+#4563 = LINE('',#4564,#4565);+#4564 = CARTESIAN_POINT('',(-3.4975,1.45,1.3));+#4565 = VECTOR('',#4566,1.);+#4566 = DIRECTION('',(-1.,-0.,-0.));+#4567 = PCURVE('',#4410,#4568);+#4568 = DEFINITIONAL_REPRESENTATION('',(#4569),#4573);+#4569 = LINE('',#4570,#4571);+#4570 = CARTESIAN_POINT('',(0.,0.18));+#4571 = VECTOR('',#4572,1.);+#4572 = DIRECTION('',(-1.,0.));+#4573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4574 = PCURVE('',#4494,#4575);+#4575 = DEFINITIONAL_REPRESENTATION('',(#4576),#4580);+#4576 = LINE('',#4577,#4578);+#4577 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#4578 = VECTOR('',#4579,1.);+#4579 = DIRECTION('',(-0.,1.));+#4580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4581 = ADVANCED_FACE('',(#4582),#4494,.T.);+#4582 = FACE_BOUND('',#4583,.F.);+#4583 = EDGE_LOOP('',(#4584,#4585,#4586,#4614,#4642,#4675,#4703,#4731,+ #4759,#4792,#4820,#4853,#4881,#4910));+#4584 = ORIENTED_EDGE('',*,*,#4479,.F.);+#4585 = ORIENTED_EDGE('',*,*,#4561,.T.);+#4586 = ORIENTED_EDGE('',*,*,#4587,.T.);+#4587 = EDGE_CURVE('',#4534,#4588,#4590,.T.);+#4588 = VERTEX_POINT('',#4589);+#4589 = CARTESIAN_POINT('',(-4.006065227246,1.45,1.159985897103));+#4590 = SURFACE_CURVE('',#4591,(#4596,#4607),.PCURVE_S1.);+#4591 = CIRCLE('',#4592,0.28);+#4592 = AXIS2_PLACEMENT_3D('',#4593,#4594,#4595);+#4593 = CARTESIAN_POINT('',(-3.763569972422,1.45,1.02));+#4594 = DIRECTION('',(0.,-1.,0.));+#4595 = DIRECTION('',(0.,0.,1.));+#4596 = PCURVE('',#4494,#4597);+#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4606);+#4598 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4599,#4600,#4601,#4602,+#4603,#4604,#4605),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4599 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#4600 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#4601 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#4602 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#4603 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#4604 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#4605 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#4606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4607 = PCURVE('',#4549,#4608);+#4608 = DEFINITIONAL_REPRESENTATION('',(#4609),#4613);+#4609 = LINE('',#4610,#4611);+#4610 = CARTESIAN_POINT('',(6.28318530718,0.18));+#4611 = VECTOR('',#4612,1.);+#4612 = DIRECTION('',(-1.,-0.));+#4613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4614 = ORIENTED_EDGE('',*,*,#4615,.T.);+#4615 = EDGE_CURVE('',#4588,#4616,#4618,.T.);+#4616 = VERTEX_POINT('',#4617);+#4617 = CARTESIAN_POINT('',(-4.537145669057,1.45,0.240004029399));+#4618 = SURFACE_CURVE('',#4619,(#4623,#4630),.PCURVE_S1.);+#4619 = LINE('',#4620,#4621);+#4620 = CARTESIAN_POINT('',(-3.954105448151,1.45,1.249994963251));+#4621 = VECTOR('',#4622,1.);+#4622 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#4623 = PCURVE('',#4494,#4624);+#4624 = DEFINITIONAL_REPRESENTATION('',(#4625),#4629);+#4625 = LINE('',#4626,#4627);+#4626 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#4627 = VECTOR('',#4628,1.);+#4628 = DIRECTION('',(0.866054481515,0.499949632511));+#4629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4630 = PCURVE('',#4631,#4636);+#4631 = PLANE('',#4632);+#4632 = AXIS2_PLACEMENT_3D('',#4633,#4634,#4635);+#4633 = CARTESIAN_POINT('',(-4.006065227246,1.27,1.159985897103));+#4634 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#4635 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#4636 = DEFINITIONAL_REPRESENTATION('',(#4637),#4641);+#4637 = LINE('',#4638,#4639);+#4638 = CARTESIAN_POINT('',(0.103930027578,0.18));+#4639 = VECTOR('',#4640,1.);+#4640 = DIRECTION('',(-1.,0.));+#4641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4642 = ORIENTED_EDGE('',*,*,#4643,.F.);+#4643 = EDGE_CURVE('',#4644,#4616,#4646,.T.);+#4644 = VERTEX_POINT('',#4645);+#4645 = CARTESIAN_POINT('',(-4.606430027578,1.45,0.2));+#4646 = SURFACE_CURVE('',#4647,(#4652,#4663),.PCURVE_S1.);+#4647 = CIRCLE('',#4648,8.E-02);+#4648 = AXIS2_PLACEMENT_3D('',#4649,#4650,#4651);+#4649 = CARTESIAN_POINT('',(-4.606430027578,1.45,0.28));+#4650 = DIRECTION('',(0.,-1.,0.));+#4651 = DIRECTION('',(0.,0.,1.));+#4652 = PCURVE('',#4494,#4653);+#4653 = DEFINITIONAL_REPRESENTATION('',(#4654),#4662);+#4654 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4655,#4656,#4657,#4658,+#4659,#4660,#4661),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4655 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#4656 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#4657 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#4658 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#4659 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#4660 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#4661 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#4662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4663 = PCURVE('',#4664,#4669);+#4664 = CYLINDRICAL_SURFACE('',#4665,8.E-02);+#4665 = AXIS2_PLACEMENT_3D('',#4666,#4667,#4668);+#4666 = CARTESIAN_POINT('',(-4.606430027578,1.27,0.28));+#4667 = DIRECTION('',(0.,1.,0.));+#4668 = DIRECTION('',(0.,0.,1.));+#4669 = DEFINITIONAL_REPRESENTATION('',(#4670),#4674);+#4670 = LINE('',#4671,#4672);+#4671 = CARTESIAN_POINT('',(6.28318530718,0.18));+#4672 = VECTOR('',#4673,1.);+#4673 = DIRECTION('',(-1.,-0.));+#4674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4675 = ORIENTED_EDGE('',*,*,#4676,.T.);+#4676 = EDGE_CURVE('',#4644,#4677,#4679,.T.);+#4677 = VERTEX_POINT('',#4678);+#4678 = CARTESIAN_POINT('',(-5.255,1.45,0.2));+#4679 = SURFACE_CURVE('',#4680,(#4684,#4691),.PCURVE_S1.);+#4680 = LINE('',#4681,#4682);+#4681 = CARTESIAN_POINT('',(-4.5025,1.45,0.2));+#4682 = VECTOR('',#4683,1.);+#4683 = DIRECTION('',(-1.,-0.,-0.));+#4684 = PCURVE('',#4494,#4685);+#4685 = DEFINITIONAL_REPRESENTATION('',(#4686),#4690);+#4686 = LINE('',#4687,#4688);+#4687 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#4688 = VECTOR('',#4689,1.);+#4689 = DIRECTION('',(-0.,1.));+#4690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4691 = PCURVE('',#4692,#4697);+#4692 = PLANE('',#4693);+#4693 = AXIS2_PLACEMENT_3D('',#4694,#4695,#4696);+#4694 = CARTESIAN_POINT('',(-4.606430027578,1.27,0.2));+#4695 = DIRECTION('',(0.,0.,1.));+#4696 = DIRECTION('',(1.,0.,0.));+#4697 = DEFINITIONAL_REPRESENTATION('',(#4698),#4702);+#4698 = LINE('',#4699,#4700);+#4699 = CARTESIAN_POINT('',(0.103930027578,0.18));+#4700 = VECTOR('',#4701,1.);+#4701 = DIRECTION('',(-1.,0.));+#4702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4703 = ORIENTED_EDGE('',*,*,#4704,.T.);+#4704 = EDGE_CURVE('',#4677,#4705,#4707,.T.);+#4705 = VERTEX_POINT('',#4706);+#4706 = CARTESIAN_POINT('',(-5.255,1.45,0.));+#4707 = SURFACE_CURVE('',#4708,(#4712,#4719),.PCURVE_S1.);+#4708 = LINE('',#4709,#4710);+#4709 = CARTESIAN_POINT('',(-5.255,1.45,1.223081297441E-02));+#4710 = VECTOR('',#4711,1.);+#4711 = DIRECTION('',(-0.,-0.,-1.));+#4712 = PCURVE('',#4494,#4713);+#4713 = DEFINITIONAL_REPRESENTATION('',(#4714),#4718);+#4714 = LINE('',#4715,#4716);+#4715 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#4716 = VECTOR('',#4717,1.);+#4717 = DIRECTION('',(1.,0.));+#4718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4719 = PCURVE('',#4720,#4725);+#4720 = PLANE('',#4721);+#4721 = AXIS2_PLACEMENT_3D('',#4722,#4723,#4724);+#4722 = CARTESIAN_POINT('',(-5.255,0.59,-0.5));+#4723 = DIRECTION('',(-1.,0.,0.));+#4724 = DIRECTION('',(0.,0.,-1.));+#4725 = DEFINITIONAL_REPRESENTATION('',(#4726),#4730);+#4726 = LINE('',#4727,#4728);+#4727 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#4728 = VECTOR('',#4729,1.);+#4729 = DIRECTION('',(1.,0.));+#4730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4731 = ORIENTED_EDGE('',*,*,#4732,.F.);+#4732 = EDGE_CURVE('',#4733,#4705,#4735,.T.);+#4733 = VERTEX_POINT('',#4734);+#4734 = CARTESIAN_POINT('',(-4.606430027578,1.45,-5.551115123126E-17));+#4735 = SURFACE_CURVE('',#4736,(#4740,#4747),.PCURVE_S1.);+#4736 = LINE('',#4737,#4738);+#4737 = CARTESIAN_POINT('',(-4.5025,1.45,0.));+#4738 = VECTOR('',#4739,1.);+#4739 = DIRECTION('',(-1.,-0.,-0.));+#4740 = PCURVE('',#4494,#4741);+#4741 = DEFINITIONAL_REPRESENTATION('',(#4742),#4746);+#4742 = LINE('',#4743,#4744);+#4743 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#4744 = VECTOR('',#4745,1.);+#4745 = DIRECTION('',(-0.,1.));+#4746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4747 = PCURVE('',#4748,#4753);+#4748 = PLANE('',#4749);+#4749 = AXIS2_PLACEMENT_3D('',#4750,#4751,#4752);+#4750 = CARTESIAN_POINT('',(-4.606430027578,1.27,0.));+#4751 = DIRECTION('',(0.,0.,1.));+#4752 = DIRECTION('',(1.,0.,0.));+#4753 = DEFINITIONAL_REPRESENTATION('',(#4754),#4758);+#4754 = LINE('',#4755,#4756);+#4755 = CARTESIAN_POINT('',(0.103930027578,0.18));+#4756 = VECTOR('',#4757,1.);+#4757 = DIRECTION('',(-1.,0.));+#4758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4759 = ORIENTED_EDGE('',*,*,#4760,.T.);+#4760 = EDGE_CURVE('',#4733,#4761,#4763,.T.);+#4761 = VERTEX_POINT('',#4762);+#4762 = CARTESIAN_POINT('',(-4.363934772754,1.45,0.140014102897));+#4763 = SURFACE_CURVE('',#4764,(#4769,#4780),.PCURVE_S1.);+#4764 = CIRCLE('',#4765,0.28);+#4765 = AXIS2_PLACEMENT_3D('',#4766,#4767,#4768);+#4766 = CARTESIAN_POINT('',(-4.606430027578,1.45,0.28));+#4767 = DIRECTION('',(0.,-1.,0.));+#4768 = DIRECTION('',(0.,0.,1.));+#4769 = PCURVE('',#4494,#4770);+#4770 = DEFINITIONAL_REPRESENTATION('',(#4771),#4779);+#4771 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4772,#4773,#4774,#4775,+#4776,#4777,#4778),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4772 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#4773 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#4774 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#4775 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#4776 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#4777 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#4778 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#4779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4780 = PCURVE('',#4781,#4786);+#4781 = CYLINDRICAL_SURFACE('',#4782,0.28);+#4782 = AXIS2_PLACEMENT_3D('',#4783,#4784,#4785);+#4783 = CARTESIAN_POINT('',(-4.606430027578,1.27,0.28));+#4784 = DIRECTION('',(0.,1.,0.));+#4785 = DIRECTION('',(0.,0.,1.));+#4786 = DEFINITIONAL_REPRESENTATION('',(#4787),#4791);+#4787 = LINE('',#4788,#4789);+#4788 = CARTESIAN_POINT('',(6.28318530718,0.18));+#4789 = VECTOR('',#4790,1.);+#4790 = DIRECTION('',(-1.,-0.));+#4791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4792 = ORIENTED_EDGE('',*,*,#4793,.F.);+#4793 = EDGE_CURVE('',#4794,#4761,#4796,.T.);+#4794 = VERTEX_POINT('',#4795);+#4795 = CARTESIAN_POINT('',(-3.832854330943,1.45,1.059995970601));+#4796 = SURFACE_CURVE('',#4797,(#4801,#4808),.PCURVE_S1.);+#4797 = LINE('',#4798,#4799);+#4798 = CARTESIAN_POINT('',(-3.780894551849,1.45,1.150005036749));+#4799 = VECTOR('',#4800,1.);+#4800 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#4801 = PCURVE('',#4494,#4802);+#4802 = DEFINITIONAL_REPRESENTATION('',(#4803),#4807);+#4803 = LINE('',#4804,#4805);+#4804 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#4805 = VECTOR('',#4806,1.);+#4806 = DIRECTION('',(0.866054481515,0.499949632511));+#4807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4808 = PCURVE('',#4809,#4814);+#4809 = PLANE('',#4810);+#4810 = AXIS2_PLACEMENT_3D('',#4811,#4812,#4813);+#4811 = CARTESIAN_POINT('',(-3.832854330943,1.27,1.059995970601));+#4812 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#4813 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#4814 = DEFINITIONAL_REPRESENTATION('',(#4815),#4819);+#4815 = LINE('',#4816,#4817);+#4816 = CARTESIAN_POINT('',(0.103930027578,0.18));+#4817 = VECTOR('',#4818,1.);+#4818 = DIRECTION('',(-1.,0.));+#4819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4820 = ORIENTED_EDGE('',*,*,#4821,.F.);+#4821 = EDGE_CURVE('',#4822,#4794,#4824,.T.);+#4822 = VERTEX_POINT('',#4823);+#4823 = CARTESIAN_POINT('',(-3.763569972422,1.45,1.1));+#4824 = SURFACE_CURVE('',#4825,(#4830,#4841),.PCURVE_S1.);+#4825 = CIRCLE('',#4826,8.E-02);+#4826 = AXIS2_PLACEMENT_3D('',#4827,#4828,#4829);+#4827 = CARTESIAN_POINT('',(-3.763569972422,1.45,1.02));+#4828 = DIRECTION('',(0.,-1.,0.));+#4829 = DIRECTION('',(0.,0.,1.));+#4830 = PCURVE('',#4494,#4831);+#4831 = DEFINITIONAL_REPRESENTATION('',(#4832),#4840);+#4832 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4833,#4834,#4835,#4836,+#4837,#4838,#4839),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4833 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#4834 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#4835 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#4836 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#4837 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#4838 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#4839 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#4840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4841 = PCURVE('',#4842,#4847);+#4842 = CYLINDRICAL_SURFACE('',#4843,8.E-02);+#4843 = AXIS2_PLACEMENT_3D('',#4844,#4845,#4846);+#4844 = CARTESIAN_POINT('',(-3.763569972422,1.27,1.02));+#4845 = DIRECTION('',(0.,1.,0.));+#4846 = DIRECTION('',(0.,0.,1.));+#4847 = DEFINITIONAL_REPRESENTATION('',(#4848),#4852);+#4848 = LINE('',#4849,#4850);+#4849 = CARTESIAN_POINT('',(6.28318530718,0.18));+#4850 = VECTOR('',#4851,1.);+#4851 = DIRECTION('',(-1.,-0.));+#4852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4853 = ORIENTED_EDGE('',*,*,#4854,.F.);+#4854 = EDGE_CURVE('',#4855,#4822,#4857,.T.);+#4855 = VERTEX_POINT('',#4856);+#4856 = CARTESIAN_POINT('',(-3.4975,1.45,1.1));+#4857 = SURFACE_CURVE('',#4858,(#4862,#4869),.PCURVE_S1.);+#4858 = LINE('',#4859,#4860);+#4859 = CARTESIAN_POINT('',(-3.4975,1.45,1.1));+#4860 = VECTOR('',#4861,1.);+#4861 = DIRECTION('',(-1.,-0.,-0.));+#4862 = PCURVE('',#4494,#4863);+#4863 = DEFINITIONAL_REPRESENTATION('',(#4864),#4868);+#4864 = LINE('',#4865,#4866);+#4865 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#4866 = VECTOR('',#4867,1.);+#4867 = DIRECTION('',(-0.,1.));+#4868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4869 = PCURVE('',#4870,#4875);+#4870 = PLANE('',#4871);+#4871 = AXIS2_PLACEMENT_3D('',#4872,#4873,#4874);+#4872 = CARTESIAN_POINT('',(-3.4975,1.27,1.1));+#4873 = DIRECTION('',(0.,0.,1.));+#4874 = DIRECTION('',(1.,0.,0.));+#4875 = DEFINITIONAL_REPRESENTATION('',(#4876),#4880);+#4876 = LINE('',#4877,#4878);+#4877 = CARTESIAN_POINT('',(0.,0.18));+#4878 = VECTOR('',#4879,1.);+#4879 = DIRECTION('',(-1.,0.));+#4880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4881 = ORIENTED_EDGE('',*,*,#4882,.F.);+#4882 = EDGE_CURVE('',#4883,#4855,#4885,.T.);+#4883 = VERTEX_POINT('',#4884);+#4884 = CARTESIAN_POINT('',(-3.4475,1.45,1.113397459622));+#4885 = SURFACE_CURVE('',#4886,(#4891,#4898),.PCURVE_S1.);+#4886 = CIRCLE('',#4887,0.1);+#4887 = AXIS2_PLACEMENT_3D('',#4888,#4889,#4890);+#4888 = CARTESIAN_POINT('',(-3.4975,1.45,1.2));+#4889 = DIRECTION('',(0.,1.,-0.));+#4890 = DIRECTION('',(-1.,0.,0.));+#4891 = PCURVE('',#4494,#4892);+#4892 = DEFINITIONAL_REPRESENTATION('',(#4893),#4897);+#4893 = CIRCLE('',#4894,0.1);+#4894 = AXIS2_PLACEMENT_2D('',#4895,#4896);+#4895 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#4896 = DIRECTION('',(0.,1.));+#4897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4898 = PCURVE('',#4899,#4904);+#4899 = CYLINDRICAL_SURFACE('',#4900,0.1);+#4900 = AXIS2_PLACEMENT_3D('',#4901,#4902,#4903);+#4901 = CARTESIAN_POINT('',(-3.4975,1.27,1.2));+#4902 = DIRECTION('',(0.,1.,0.));+#4903 = DIRECTION('',(-1.,-0.,-0.));+#4904 = DEFINITIONAL_REPRESENTATION('',(#4905),#4909);+#4905 = LINE('',#4906,#4907);+#4906 = CARTESIAN_POINT('',(-0.,0.18));+#4907 = VECTOR('',#4908,1.);+#4908 = DIRECTION('',(1.,-0.));+#4909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4910 = ORIENTED_EDGE('',*,*,#4911,.F.);+#4911 = EDGE_CURVE('',#4452,#4883,#4912,.T.);+#4912 = SURFACE_CURVE('',#4913,(#4917,#4924),.PCURVE_S1.);+#4913 = LINE('',#4914,#4915);+#4914 = CARTESIAN_POINT('',(-3.4475,1.45,1.223081297441E-02));+#4915 = VECTOR('',#4916,1.);+#4916 = DIRECTION('',(-0.,-0.,-1.));+#4917 = PCURVE('',#4494,#4918);+#4918 = DEFINITIONAL_REPRESENTATION('',(#4919),#4923);+#4919 = LINE('',#4920,#4921);+#4920 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#4921 = VECTOR('',#4922,1.);+#4922 = DIRECTION('',(1.,0.));+#4923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4924 = PCURVE('',#4467,#4925);+#4925 = DEFINITIONAL_REPRESENTATION('',(#4926),#4930);+#4926 = LINE('',#4927,#4928);+#4927 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#4928 = VECTOR('',#4929,1.);+#4929 = DIRECTION('',(1.,0.));+#4930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4931 = ADVANCED_FACE('',(#4932),#4467,.F.);+#4932 = FACE_BOUND('',#4933,.T.);+#4933 = EDGE_LOOP('',(#4934,#4935,#4958,#4979));+#4934 = ORIENTED_EDGE('',*,*,#4451,.F.);+#4935 = ORIENTED_EDGE('',*,*,#4936,.T.);+#4936 = EDGE_CURVE('',#4423,#4937,#4939,.T.);+#4937 = VERTEX_POINT('',#4938);+#4938 = CARTESIAN_POINT('',(-3.4475,1.09,1.113397459622));+#4939 = SURFACE_CURVE('',#4940,(#4944,#4951),.PCURVE_S1.);+#4940 = LINE('',#4941,#4942);+#4941 = CARTESIAN_POINT('',(-3.4475,1.09,1.223081297441E-02));+#4942 = VECTOR('',#4943,1.);+#4943 = DIRECTION('',(-0.,-0.,-1.));+#4944 = PCURVE('',#4467,#4945);+#4945 = DEFINITIONAL_REPRESENTATION('',(#4946),#4950);+#4946 = LINE('',#4947,#4948);+#4947 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#4948 = VECTOR('',#4949,1.);+#4949 = DIRECTION('',(1.,0.));+#4950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4951 = PCURVE('',#4439,#4952);+#4952 = DEFINITIONAL_REPRESENTATION('',(#4953),#4957);+#4953 = LINE('',#4954,#4955);+#4954 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#4955 = VECTOR('',#4956,1.);+#4956 = DIRECTION('',(1.,0.));+#4957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4958 = ORIENTED_EDGE('',*,*,#4959,.T.);+#4959 = EDGE_CURVE('',#4937,#4883,#4960,.T.);+#4960 = SURFACE_CURVE('',#4961,(#4965,#4972),.PCURVE_S1.);+#4961 = LINE('',#4962,#4963);+#4962 = CARTESIAN_POINT('',(-3.4475,1.27,1.113397459622));+#4963 = VECTOR('',#4964,1.);+#4964 = DIRECTION('',(0.,1.,0.));+#4965 = PCURVE('',#4467,#4966);+#4966 = DEFINITIONAL_REPRESENTATION('',(#4967),#4971);+#4967 = LINE('',#4968,#4969);+#4968 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#4969 = VECTOR('',#4970,1.);+#4970 = DIRECTION('',(0.,-1.));+#4971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4972 = PCURVE('',#4899,#4973);+#4973 = DEFINITIONAL_REPRESENTATION('',(#4974),#4978);+#4974 = LINE('',#4975,#4976);+#4975 = CARTESIAN_POINT('',(4.188790204786,0.));+#4976 = VECTOR('',#4977,1.);+#4977 = DIRECTION('',(0.,1.));+#4978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4979 = ORIENTED_EDGE('',*,*,#4911,.F.);+#4980 = ADVANCED_FACE('',(#4981),#4439,.F.);+#4981 = FACE_BOUND('',#4982,.T.);+#4982 = EDGE_LOOP('',(#4983,#4984,#4985,#5013,#5036,#5064,#5087,#5110,+ #5133,#5161,#5184,#5212,#5235,#5257));+#4983 = ORIENTED_EDGE('',*,*,#4422,.F.);+#4984 = ORIENTED_EDGE('',*,*,#4510,.T.);+#4985 = ORIENTED_EDGE('',*,*,#4986,.T.);+#4986 = EDGE_CURVE('',#4511,#4987,#4989,.T.);+#4987 = VERTEX_POINT('',#4988);+#4988 = CARTESIAN_POINT('',(-4.006065227246,1.09,1.159985897103));+#4989 = SURFACE_CURVE('',#4990,(#4995,#5006),.PCURVE_S1.);+#4990 = CIRCLE('',#4991,0.28);+#4991 = AXIS2_PLACEMENT_3D('',#4992,#4993,#4994);+#4992 = CARTESIAN_POINT('',(-3.763569972422,1.09,1.02));+#4993 = DIRECTION('',(0.,-1.,0.));+#4994 = DIRECTION('',(0.,0.,1.));+#4995 = PCURVE('',#4439,#4996);+#4996 = DEFINITIONAL_REPRESENTATION('',(#4997),#5005);+#4997 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4998,#4999,#5000,#5001,+#5002,#5003,#5004),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4998 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#4999 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#5000 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#5001 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#5002 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#5003 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#5004 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#5005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5006 = PCURVE('',#4549,#5007);+#5007 = DEFINITIONAL_REPRESENTATION('',(#5008),#5012);+#5008 = LINE('',#5009,#5010);+#5009 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#5010 = VECTOR('',#5011,1.);+#5011 = DIRECTION('',(-1.,0.));+#5012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5013 = ORIENTED_EDGE('',*,*,#5014,.T.);+#5014 = EDGE_CURVE('',#4987,#5015,#5017,.T.);+#5015 = VERTEX_POINT('',#5016);+#5016 = CARTESIAN_POINT('',(-4.537145669057,1.09,0.240004029399));+#5017 = SURFACE_CURVE('',#5018,(#5022,#5029),.PCURVE_S1.);+#5018 = LINE('',#5019,#5020);+#5019 = CARTESIAN_POINT('',(-3.954105448151,1.09,1.249994963251));+#5020 = VECTOR('',#5021,1.);+#5021 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#5022 = PCURVE('',#4439,#5023);+#5023 = DEFINITIONAL_REPRESENTATION('',(#5024),#5028);+#5024 = LINE('',#5025,#5026);+#5025 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#5026 = VECTOR('',#5027,1.);+#5027 = DIRECTION('',(0.866054481515,0.499949632511));+#5028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5029 = PCURVE('',#4631,#5030);+#5030 = DEFINITIONAL_REPRESENTATION('',(#5031),#5035);+#5031 = LINE('',#5032,#5033);+#5032 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#5033 = VECTOR('',#5034,1.);+#5034 = DIRECTION('',(-1.,0.));+#5035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5036 = ORIENTED_EDGE('',*,*,#5037,.F.);+#5037 = EDGE_CURVE('',#5038,#5015,#5040,.T.);+#5038 = VERTEX_POINT('',#5039);+#5039 = CARTESIAN_POINT('',(-4.606430027578,1.09,0.2));+#5040 = SURFACE_CURVE('',#5041,(#5046,#5057),.PCURVE_S1.);+#5041 = CIRCLE('',#5042,8.E-02);+#5042 = AXIS2_PLACEMENT_3D('',#5043,#5044,#5045);+#5043 = CARTESIAN_POINT('',(-4.606430027578,1.09,0.28));+#5044 = DIRECTION('',(0.,-1.,0.));+#5045 = DIRECTION('',(0.,0.,1.));+#5046 = PCURVE('',#4439,#5047);+#5047 = DEFINITIONAL_REPRESENTATION('',(#5048),#5056);+#5048 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5049,#5050,#5051,#5052,+#5053,#5054,#5055),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5049 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#5050 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#5051 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#5052 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#5053 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#5054 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#5055 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#5056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5057 = PCURVE('',#4664,#5058);+#5058 = DEFINITIONAL_REPRESENTATION('',(#5059),#5063);+#5059 = LINE('',#5060,#5061);+#5060 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#5061 = VECTOR('',#5062,1.);+#5062 = DIRECTION('',(-1.,0.));+#5063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5064 = ORIENTED_EDGE('',*,*,#5065,.T.);+#5065 = EDGE_CURVE('',#5038,#5066,#5068,.T.);+#5066 = VERTEX_POINT('',#5067);+#5067 = CARTESIAN_POINT('',(-5.255,1.09,0.2));+#5068 = SURFACE_CURVE('',#5069,(#5073,#5080),.PCURVE_S1.);+#5069 = LINE('',#5070,#5071);+#5070 = CARTESIAN_POINT('',(-4.5025,1.09,0.2));+#5071 = VECTOR('',#5072,1.);+#5072 = DIRECTION('',(-1.,-0.,-0.));+#5073 = PCURVE('',#4439,#5074);+#5074 = DEFINITIONAL_REPRESENTATION('',(#5075),#5079);+#5075 = LINE('',#5076,#5077);+#5076 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#5077 = VECTOR('',#5078,1.);+#5078 = DIRECTION('',(-0.,1.));+#5079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5080 = PCURVE('',#4692,#5081);+#5081 = DEFINITIONAL_REPRESENTATION('',(#5082),#5086);+#5082 = LINE('',#5083,#5084);+#5083 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#5084 = VECTOR('',#5085,1.);+#5085 = DIRECTION('',(-1.,0.));+#5086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5087 = ORIENTED_EDGE('',*,*,#5088,.T.);+#5088 = EDGE_CURVE('',#5066,#5089,#5091,.T.);+#5089 = VERTEX_POINT('',#5090);+#5090 = CARTESIAN_POINT('',(-5.255,1.09,0.));+#5091 = SURFACE_CURVE('',#5092,(#5096,#5103),.PCURVE_S1.);+#5092 = LINE('',#5093,#5094);+#5093 = CARTESIAN_POINT('',(-5.255,1.09,1.223081297441E-02));+#5094 = VECTOR('',#5095,1.);+#5095 = DIRECTION('',(-0.,-0.,-1.));+#5096 = PCURVE('',#4439,#5097);+#5097 = DEFINITIONAL_REPRESENTATION('',(#5098),#5102);+#5098 = LINE('',#5099,#5100);+#5099 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#5100 = VECTOR('',#5101,1.);+#5101 = DIRECTION('',(1.,0.));+#5102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5103 = PCURVE('',#4720,#5104);+#5104 = DEFINITIONAL_REPRESENTATION('',(#5105),#5109);+#5105 = LINE('',#5106,#5107);+#5106 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#5107 = VECTOR('',#5108,1.);+#5108 = DIRECTION('',(1.,0.));+#5109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5110 = ORIENTED_EDGE('',*,*,#5111,.F.);+#5111 = EDGE_CURVE('',#5112,#5089,#5114,.T.);+#5112 = VERTEX_POINT('',#5113);+#5113 = CARTESIAN_POINT('',(-4.606430027578,1.09,-5.551115123126E-17));+#5114 = SURFACE_CURVE('',#5115,(#5119,#5126),.PCURVE_S1.);+#5115 = LINE('',#5116,#5117);+#5116 = CARTESIAN_POINT('',(-4.5025,1.09,0.));+#5117 = VECTOR('',#5118,1.);+#5118 = DIRECTION('',(-1.,-0.,-0.));+#5119 = PCURVE('',#4439,#5120);+#5120 = DEFINITIONAL_REPRESENTATION('',(#5121),#5125);+#5121 = LINE('',#5122,#5123);+#5122 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#5123 = VECTOR('',#5124,1.);+#5124 = DIRECTION('',(-0.,1.));+#5125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5126 = PCURVE('',#4748,#5127);+#5127 = DEFINITIONAL_REPRESENTATION('',(#5128),#5132);+#5128 = LINE('',#5129,#5130);+#5129 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#5130 = VECTOR('',#5131,1.);+#5131 = DIRECTION('',(-1.,0.));+#5132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5133 = ORIENTED_EDGE('',*,*,#5134,.T.);+#5134 = EDGE_CURVE('',#5112,#5135,#5137,.T.);+#5135 = VERTEX_POINT('',#5136);+#5136 = CARTESIAN_POINT('',(-4.363934772754,1.09,0.140014102897));+#5137 = SURFACE_CURVE('',#5138,(#5143,#5154),.PCURVE_S1.);+#5138 = CIRCLE('',#5139,0.28);+#5139 = AXIS2_PLACEMENT_3D('',#5140,#5141,#5142);+#5140 = CARTESIAN_POINT('',(-4.606430027578,1.09,0.28));+#5141 = DIRECTION('',(0.,-1.,0.));+#5142 = DIRECTION('',(0.,0.,1.));+#5143 = PCURVE('',#4439,#5144);+#5144 = DEFINITIONAL_REPRESENTATION('',(#5145),#5153);+#5145 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5146,#5147,#5148,#5149,+#5150,#5151,#5152),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5146 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#5147 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#5148 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#5149 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#5150 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#5151 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#5152 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#5153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5154 = PCURVE('',#4781,#5155);+#5155 = DEFINITIONAL_REPRESENTATION('',(#5156),#5160);+#5156 = LINE('',#5157,#5158);+#5157 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#5158 = VECTOR('',#5159,1.);+#5159 = DIRECTION('',(-1.,0.));+#5160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5161 = ORIENTED_EDGE('',*,*,#5162,.F.);+#5162 = EDGE_CURVE('',#5163,#5135,#5165,.T.);+#5163 = VERTEX_POINT('',#5164);+#5164 = CARTESIAN_POINT('',(-3.832854330943,1.09,1.059995970601));+#5165 = SURFACE_CURVE('',#5166,(#5170,#5177),.PCURVE_S1.);+#5166 = LINE('',#5167,#5168);+#5167 = CARTESIAN_POINT('',(-3.780894551849,1.09,1.150005036749));+#5168 = VECTOR('',#5169,1.);+#5169 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#5170 = PCURVE('',#4439,#5171);+#5171 = DEFINITIONAL_REPRESENTATION('',(#5172),#5176);+#5172 = LINE('',#5173,#5174);+#5173 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#5174 = VECTOR('',#5175,1.);+#5175 = DIRECTION('',(0.866054481515,0.499949632511));+#5176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5177 = PCURVE('',#4809,#5178);+#5178 = DEFINITIONAL_REPRESENTATION('',(#5179),#5183);+#5179 = LINE('',#5180,#5181);+#5180 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#5181 = VECTOR('',#5182,1.);+#5182 = DIRECTION('',(-1.,0.));+#5183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5184 = ORIENTED_EDGE('',*,*,#5185,.F.);+#5185 = EDGE_CURVE('',#5186,#5163,#5188,.T.);+#5186 = VERTEX_POINT('',#5187);+#5187 = CARTESIAN_POINT('',(-3.763569972422,1.09,1.1));+#5188 = SURFACE_CURVE('',#5189,(#5194,#5205),.PCURVE_S1.);+#5189 = CIRCLE('',#5190,8.E-02);+#5190 = AXIS2_PLACEMENT_3D('',#5191,#5192,#5193);+#5191 = CARTESIAN_POINT('',(-3.763569972422,1.09,1.02));+#5192 = DIRECTION('',(0.,-1.,0.));+#5193 = DIRECTION('',(0.,0.,1.));+#5194 = PCURVE('',#4439,#5195);+#5195 = DEFINITIONAL_REPRESENTATION('',(#5196),#5204);+#5196 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5197,#5198,#5199,#5200,+#5201,#5202,#5203),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5197 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#5198 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#5199 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#5200 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#5201 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#5202 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#5203 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#5204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5205 = PCURVE('',#4842,#5206);+#5206 = DEFINITIONAL_REPRESENTATION('',(#5207),#5211);+#5207 = LINE('',#5208,#5209);+#5208 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#5209 = VECTOR('',#5210,1.);+#5210 = DIRECTION('',(-1.,0.));+#5211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5212 = ORIENTED_EDGE('',*,*,#5213,.F.);+#5213 = EDGE_CURVE('',#5214,#5186,#5216,.T.);+#5214 = VERTEX_POINT('',#5215);+#5215 = CARTESIAN_POINT('',(-3.4975,1.09,1.1));+#5216 = SURFACE_CURVE('',#5217,(#5221,#5228),.PCURVE_S1.);+#5217 = LINE('',#5218,#5219);+#5218 = CARTESIAN_POINT('',(-3.4975,1.09,1.1));+#5219 = VECTOR('',#5220,1.);+#5220 = DIRECTION('',(-1.,-0.,-0.));+#5221 = PCURVE('',#4439,#5222);+#5222 = DEFINITIONAL_REPRESENTATION('',(#5223),#5227);+#5223 = LINE('',#5224,#5225);+#5224 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#5225 = VECTOR('',#5226,1.);+#5226 = DIRECTION('',(-0.,1.));+#5227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5228 = PCURVE('',#4870,#5229);+#5229 = DEFINITIONAL_REPRESENTATION('',(#5230),#5234);+#5230 = LINE('',#5231,#5232);+#5231 = CARTESIAN_POINT('',(0.,-0.18));+#5232 = VECTOR('',#5233,1.);+#5233 = DIRECTION('',(-1.,0.));+#5234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5235 = ORIENTED_EDGE('',*,*,#5236,.F.);+#5236 = EDGE_CURVE('',#4937,#5214,#5237,.T.);+#5237 = SURFACE_CURVE('',#5238,(#5243,#5250),.PCURVE_S1.);+#5238 = CIRCLE('',#5239,0.1);+#5239 = AXIS2_PLACEMENT_3D('',#5240,#5241,#5242);+#5240 = CARTESIAN_POINT('',(-3.4975,1.09,1.2));+#5241 = DIRECTION('',(0.,1.,-0.));+#5242 = DIRECTION('',(-1.,0.,0.));+#5243 = PCURVE('',#4439,#5244);+#5244 = DEFINITIONAL_REPRESENTATION('',(#5245),#5249);+#5245 = CIRCLE('',#5246,0.1);+#5246 = AXIS2_PLACEMENT_2D('',#5247,#5248);+#5247 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#5248 = DIRECTION('',(0.,1.));+#5249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5250 = PCURVE('',#4899,#5251);+#5251 = DEFINITIONAL_REPRESENTATION('',(#5252),#5256);+#5252 = LINE('',#5253,#5254);+#5253 = CARTESIAN_POINT('',(0.,-0.18));+#5254 = VECTOR('',#5255,1.);+#5255 = DIRECTION('',(1.,0.));+#5256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5257 = ORIENTED_EDGE('',*,*,#4936,.F.);+#5258 = ADVANCED_FACE('',(#5259),#4549,.T.);+#5259 = FACE_BOUND('',#5260,.T.);+#5260 = EDGE_LOOP('',(#5261,#5262,#5283,#5284));+#5261 = ORIENTED_EDGE('',*,*,#4587,.T.);+#5262 = ORIENTED_EDGE('',*,*,#5263,.F.);+#5263 = EDGE_CURVE('',#4987,#4588,#5264,.T.);+#5264 = SURFACE_CURVE('',#5265,(#5269,#5276),.PCURVE_S1.);+#5265 = LINE('',#5266,#5267);+#5266 = CARTESIAN_POINT('',(-4.006065227246,1.09,1.159985897103));+#5267 = VECTOR('',#5268,1.);+#5268 = DIRECTION('',(0.,1.,0.));+#5269 = PCURVE('',#4549,#5270);+#5270 = DEFINITIONAL_REPRESENTATION('',(#5271),#5275);+#5271 = LINE('',#5272,#5273);+#5272 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#5273 = VECTOR('',#5274,1.);+#5274 = DIRECTION('',(0.,1.));+#5275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5276 = PCURVE('',#4631,#5277);+#5277 = DEFINITIONAL_REPRESENTATION('',(#5278),#5282);+#5278 = LINE('',#5279,#5280);+#5279 = CARTESIAN_POINT('',(0.,-0.18));+#5280 = VECTOR('',#5281,1.);+#5281 = DIRECTION('',(0.,1.));+#5282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5283 = ORIENTED_EDGE('',*,*,#4986,.F.);+#5284 = ORIENTED_EDGE('',*,*,#4533,.T.);+#5285 = ADVANCED_FACE('',(#5286),#4899,.T.);+#5286 = FACE_BOUND('',#5287,.T.);+#5287 = EDGE_LOOP('',(#5288,#5289,#5290,#5311));+#5288 = ORIENTED_EDGE('',*,*,#4959,.F.);+#5289 = ORIENTED_EDGE('',*,*,#5236,.T.);+#5290 = ORIENTED_EDGE('',*,*,#5291,.F.);+#5291 = EDGE_CURVE('',#4855,#5214,#5292,.T.);+#5292 = SURFACE_CURVE('',#5293,(#5297,#5304),.PCURVE_S1.);+#5293 = LINE('',#5294,#5295);+#5294 = CARTESIAN_POINT('',(-3.4975,1.45,1.1));+#5295 = VECTOR('',#5296,1.);+#5296 = DIRECTION('',(-0.,-1.,-0.));+#5297 = PCURVE('',#4899,#5298);+#5298 = DEFINITIONAL_REPRESENTATION('',(#5299),#5303);+#5299 = LINE('',#5300,#5301);+#5300 = CARTESIAN_POINT('',(4.712388980385,0.18));+#5301 = VECTOR('',#5302,1.);+#5302 = DIRECTION('',(0.,-1.));+#5303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5304 = PCURVE('',#4870,#5305);+#5305 = DEFINITIONAL_REPRESENTATION('',(#5306),#5310);+#5306 = LINE('',#5307,#5308);+#5307 = CARTESIAN_POINT('',(0.,0.18));+#5308 = VECTOR('',#5309,1.);+#5309 = DIRECTION('',(0.,-1.));+#5310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5311 = ORIENTED_EDGE('',*,*,#4882,.F.);+#5312 = ADVANCED_FACE('',(#5313),#4870,.F.);+#5313 = FACE_BOUND('',#5314,.T.);+#5314 = EDGE_LOOP('',(#5315,#5316,#5337,#5338));+#5315 = ORIENTED_EDGE('',*,*,#5213,.T.);+#5316 = ORIENTED_EDGE('',*,*,#5317,.F.);+#5317 = EDGE_CURVE('',#4822,#5186,#5318,.T.);+#5318 = SURFACE_CURVE('',#5319,(#5323,#5330),.PCURVE_S1.);+#5319 = LINE('',#5320,#5321);+#5320 = CARTESIAN_POINT('',(-3.763569972422,1.45,1.1));+#5321 = VECTOR('',#5322,1.);+#5322 = DIRECTION('',(-0.,-1.,-0.));+#5323 = PCURVE('',#4870,#5324);+#5324 = DEFINITIONAL_REPRESENTATION('',(#5325),#5329);+#5325 = LINE('',#5326,#5327);+#5326 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#5327 = VECTOR('',#5328,1.);+#5328 = DIRECTION('',(0.,-1.));+#5329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5330 = PCURVE('',#4842,#5331);+#5331 = DEFINITIONAL_REPRESENTATION('',(#5332),#5336);+#5332 = LINE('',#5333,#5334);+#5333 = CARTESIAN_POINT('',(6.28318530718,0.18));+#5334 = VECTOR('',#5335,1.);+#5335 = DIRECTION('',(-0.,-1.));+#5336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5337 = ORIENTED_EDGE('',*,*,#4854,.F.);+#5338 = ORIENTED_EDGE('',*,*,#5291,.T.);+#5339 = ADVANCED_FACE('',(#5340),#4842,.F.);+#5340 = FACE_BOUND('',#5341,.F.);+#5341 = EDGE_LOOP('',(#5342,#5343,#5344,#5365));+#5342 = ORIENTED_EDGE('',*,*,#5317,.F.);+#5343 = ORIENTED_EDGE('',*,*,#4821,.T.);+#5344 = ORIENTED_EDGE('',*,*,#5345,.T.);+#5345 = EDGE_CURVE('',#4794,#5163,#5346,.T.);+#5346 = SURFACE_CURVE('',#5347,(#5351,#5358),.PCURVE_S1.);+#5347 = LINE('',#5348,#5349);+#5348 = CARTESIAN_POINT('',(-3.832854330943,1.45,1.059995970601));+#5349 = VECTOR('',#5350,1.);+#5350 = DIRECTION('',(-0.,-1.,-0.));+#5351 = PCURVE('',#4842,#5352);+#5352 = DEFINITIONAL_REPRESENTATION('',(#5353),#5357);+#5353 = LINE('',#5354,#5355);+#5354 = CARTESIAN_POINT('',(5.235929597593,0.18));+#5355 = VECTOR('',#5356,1.);+#5356 = DIRECTION('',(-0.,-1.));+#5357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5358 = PCURVE('',#4809,#5359);+#5359 = DEFINITIONAL_REPRESENTATION('',(#5360),#5364);+#5360 = LINE('',#5361,#5362);+#5361 = CARTESIAN_POINT('',(0.,0.18));+#5362 = VECTOR('',#5363,1.);+#5363 = DIRECTION('',(0.,-1.));+#5364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5365 = ORIENTED_EDGE('',*,*,#5185,.F.);+#5366 = ADVANCED_FACE('',(#5367),#4809,.F.);+#5367 = FACE_BOUND('',#5368,.T.);+#5368 = EDGE_LOOP('',(#5369,#5370,#5391,#5392));+#5369 = ORIENTED_EDGE('',*,*,#5162,.T.);+#5370 = ORIENTED_EDGE('',*,*,#5371,.F.);+#5371 = EDGE_CURVE('',#4761,#5135,#5372,.T.);+#5372 = SURFACE_CURVE('',#5373,(#5377,#5384),.PCURVE_S1.);+#5373 = LINE('',#5374,#5375);+#5374 = CARTESIAN_POINT('',(-4.363934772754,1.45,0.140014102897));+#5375 = VECTOR('',#5376,1.);+#5376 = DIRECTION('',(-0.,-1.,-0.));+#5377 = PCURVE('',#4809,#5378);+#5378 = DEFINITIONAL_REPRESENTATION('',(#5379),#5383);+#5379 = LINE('',#5380,#5381);+#5380 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#5381 = VECTOR('',#5382,1.);+#5382 = DIRECTION('',(0.,-1.));+#5383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5384 = PCURVE('',#4781,#5385);+#5385 = DEFINITIONAL_REPRESENTATION('',(#5386),#5390);+#5386 = LINE('',#5387,#5388);+#5387 = CARTESIAN_POINT('',(2.094336944003,0.18));+#5388 = VECTOR('',#5389,1.);+#5389 = DIRECTION('',(-0.,-1.));+#5390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5391 = ORIENTED_EDGE('',*,*,#4793,.F.);+#5392 = ORIENTED_EDGE('',*,*,#5345,.T.);+#5393 = ADVANCED_FACE('',(#5394),#4781,.T.);+#5394 = FACE_BOUND('',#5395,.T.);+#5395 = EDGE_LOOP('',(#5396,#5417,#5418,#5419));+#5396 = ORIENTED_EDGE('',*,*,#5397,.F.);+#5397 = EDGE_CURVE('',#4733,#5112,#5398,.T.);+#5398 = SURFACE_CURVE('',#5399,(#5403,#5410),.PCURVE_S1.);+#5399 = LINE('',#5400,#5401);+#5400 = CARTESIAN_POINT('',(-4.606430027578,1.45,-5.551115123126E-17));+#5401 = VECTOR('',#5402,1.);+#5402 = DIRECTION('',(-0.,-1.,-0.));+#5403 = PCURVE('',#4781,#5404);+#5404 = DEFINITIONAL_REPRESENTATION('',(#5405),#5409);+#5405 = LINE('',#5406,#5407);+#5406 = CARTESIAN_POINT('',(3.14159265359,0.18));+#5407 = VECTOR('',#5408,1.);+#5408 = DIRECTION('',(-0.,-1.));+#5409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5410 = PCURVE('',#4748,#5411);+#5411 = DEFINITIONAL_REPRESENTATION('',(#5412),#5416);+#5412 = LINE('',#5413,#5414);+#5413 = CARTESIAN_POINT('',(0.,0.18));+#5414 = VECTOR('',#5415,1.);+#5415 = DIRECTION('',(0.,-1.));+#5416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5417 = ORIENTED_EDGE('',*,*,#4760,.T.);+#5418 = ORIENTED_EDGE('',*,*,#5371,.T.);+#5419 = ORIENTED_EDGE('',*,*,#5134,.F.);+#5420 = ADVANCED_FACE('',(#5421),#4748,.F.);+#5421 = FACE_BOUND('',#5422,.T.);+#5422 = EDGE_LOOP('',(#5423,#5424,#5425,#5446));+#5423 = ORIENTED_EDGE('',*,*,#5397,.T.);+#5424 = ORIENTED_EDGE('',*,*,#5111,.T.);+#5425 = ORIENTED_EDGE('',*,*,#5426,.T.);+#5426 = EDGE_CURVE('',#5089,#4705,#5427,.T.);+#5427 = SURFACE_CURVE('',#5428,(#5432,#5439),.PCURVE_S1.);+#5428 = LINE('',#5429,#5430);+#5429 = CARTESIAN_POINT('',(-5.255,0.93,0.));+#5430 = VECTOR('',#5431,1.);+#5431 = DIRECTION('',(0.,1.,0.));+#5432 = PCURVE('',#4748,#5433);+#5433 = DEFINITIONAL_REPRESENTATION('',(#5434),#5438);+#5434 = LINE('',#5435,#5436);+#5435 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#5436 = VECTOR('',#5437,1.);+#5437 = DIRECTION('',(0.,1.));+#5438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5439 = PCURVE('',#4720,#5440);+#5440 = DEFINITIONAL_REPRESENTATION('',(#5441),#5445);+#5441 = LINE('',#5442,#5443);+#5442 = CARTESIAN_POINT('',(-0.5,-0.34));+#5443 = VECTOR('',#5444,1.);+#5444 = DIRECTION('',(0.,-1.));+#5445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5446 = ORIENTED_EDGE('',*,*,#4732,.F.);+#5447 = ADVANCED_FACE('',(#5448),#4720,.T.);+#5448 = FACE_BOUND('',#5449,.F.);+#5449 = EDGE_LOOP('',(#5450,#5471,#5472,#5473));+#5450 = ORIENTED_EDGE('',*,*,#5451,.F.);+#5451 = EDGE_CURVE('',#5066,#4677,#5452,.T.);+#5452 = SURFACE_CURVE('',#5453,(#5457,#5464),.PCURVE_S1.);+#5453 = LINE('',#5454,#5455);+#5454 = CARTESIAN_POINT('',(-5.255,0.93,0.2));+#5455 = VECTOR('',#5456,1.);+#5456 = DIRECTION('',(0.,1.,0.));+#5457 = PCURVE('',#4720,#5458);+#5458 = DEFINITIONAL_REPRESENTATION('',(#5459),#5463);+#5459 = LINE('',#5460,#5461);+#5460 = CARTESIAN_POINT('',(-0.7,-0.34));+#5461 = VECTOR('',#5462,1.);+#5462 = DIRECTION('',(0.,-1.));+#5463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5464 = PCURVE('',#4692,#5465);+#5465 = DEFINITIONAL_REPRESENTATION('',(#5466),#5470);+#5466 = LINE('',#5467,#5468);+#5467 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#5468 = VECTOR('',#5469,1.);+#5469 = DIRECTION('',(0.,1.));+#5470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5471 = ORIENTED_EDGE('',*,*,#5088,.T.);+#5472 = ORIENTED_EDGE('',*,*,#5426,.T.);+#5473 = ORIENTED_EDGE('',*,*,#4704,.F.);+#5474 = ADVANCED_FACE('',(#5475),#4692,.T.);+#5475 = FACE_BOUND('',#5476,.F.);+#5476 = EDGE_LOOP('',(#5477,#5498,#5499,#5500));+#5477 = ORIENTED_EDGE('',*,*,#5478,.T.);+#5478 = EDGE_CURVE('',#4644,#5038,#5479,.T.);+#5479 = SURFACE_CURVE('',#5480,(#5484,#5491),.PCURVE_S1.);+#5480 = LINE('',#5481,#5482);+#5481 = CARTESIAN_POINT('',(-4.606430027578,1.45,0.2));+#5482 = VECTOR('',#5483,1.);+#5483 = DIRECTION('',(-0.,-1.,-0.));+#5484 = PCURVE('',#4692,#5485);+#5485 = DEFINITIONAL_REPRESENTATION('',(#5486),#5490);+#5486 = LINE('',#5487,#5488);+#5487 = CARTESIAN_POINT('',(0.,0.18));+#5488 = VECTOR('',#5489,1.);+#5489 = DIRECTION('',(0.,-1.));+#5490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5491 = PCURVE('',#4664,#5492);+#5492 = DEFINITIONAL_REPRESENTATION('',(#5493),#5497);+#5493 = LINE('',#5494,#5495);+#5494 = CARTESIAN_POINT('',(3.14159265359,0.18));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(-0.,-1.));+#5497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5498 = ORIENTED_EDGE('',*,*,#5065,.T.);+#5499 = ORIENTED_EDGE('',*,*,#5451,.T.);+#5500 = ORIENTED_EDGE('',*,*,#4676,.F.);+#5501 = ADVANCED_FACE('',(#5502),#4664,.F.);+#5502 = FACE_BOUND('',#5503,.F.);+#5503 = EDGE_LOOP('',(#5504,#5505,#5506,#5527));+#5504 = ORIENTED_EDGE('',*,*,#5478,.F.);+#5505 = ORIENTED_EDGE('',*,*,#4643,.T.);+#5506 = ORIENTED_EDGE('',*,*,#5507,.T.);+#5507 = EDGE_CURVE('',#4616,#5015,#5508,.T.);+#5508 = SURFACE_CURVE('',#5509,(#5513,#5520),.PCURVE_S1.);+#5509 = LINE('',#5510,#5511);+#5510 = CARTESIAN_POINT('',(-4.537145669057,1.45,0.240004029399));+#5511 = VECTOR('',#5512,1.);+#5512 = DIRECTION('',(-0.,-1.,-0.));+#5513 = PCURVE('',#4664,#5514);+#5514 = DEFINITIONAL_REPRESENTATION('',(#5515),#5519);+#5515 = LINE('',#5516,#5517);+#5516 = CARTESIAN_POINT('',(2.094336944003,0.18));+#5517 = VECTOR('',#5518,1.);+#5518 = DIRECTION('',(-0.,-1.));+#5519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5520 = PCURVE('',#4631,#5521);+#5521 = DEFINITIONAL_REPRESENTATION('',(#5522),#5526);+#5522 = LINE('',#5523,#5524);+#5523 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#5524 = VECTOR('',#5525,1.);+#5525 = DIRECTION('',(0.,-1.));+#5526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5527 = ORIENTED_EDGE('',*,*,#5037,.F.);+#5528 = ADVANCED_FACE('',(#5529),#4631,.T.);+#5529 = FACE_BOUND('',#5530,.F.);+#5530 = EDGE_LOOP('',(#5531,#5532,#5533,#5534));+#5531 = ORIENTED_EDGE('',*,*,#5263,.F.);+#5532 = ORIENTED_EDGE('',*,*,#5014,.T.);+#5533 = ORIENTED_EDGE('',*,*,#5507,.F.);+#5534 = ORIENTED_EDGE('',*,*,#4615,.F.);+#5535 = MANIFOLD_SOLID_BREP('',#5536);+#5536 = CLOSED_SHELL('',(#5537,#5659,#5735,#6085,#6134,#6412,#6439,#6466+ ,#6493,#6520,#6547,#6574,#6601,#6628,#6655,#6682));+#5537 = ADVANCED_FACE('',(#5538),#5552,.T.);+#5538 = FACE_BOUND('',#5539,.T.);+#5539 = EDGE_LOOP('',(#5540,#5575,#5604,#5632));+#5540 = ORIENTED_EDGE('',*,*,#5541,.F.);+#5541 = EDGE_CURVE('',#5542,#5544,#5546,.T.);+#5542 = VERTEX_POINT('',#5543);+#5543 = CARTESIAN_POINT('',(-3.4975,-0.18,1.3));+#5544 = VERTEX_POINT('',#5545);+#5545 = CARTESIAN_POINT('',(-3.4975,0.18,1.3));+#5546 = SURFACE_CURVE('',#5547,(#5551,#5563),.PCURVE_S1.);+#5547 = LINE('',#5548,#5549);+#5548 = CARTESIAN_POINT('',(-3.4975,-0.18,1.3));+#5549 = VECTOR('',#5550,1.);+#5550 = DIRECTION('',(0.,1.,0.));+#5551 = PCURVE('',#5552,#5557);+#5552 = CYLINDRICAL_SURFACE('',#5553,0.1);+#5553 = AXIS2_PLACEMENT_3D('',#5554,#5555,#5556);+#5554 = CARTESIAN_POINT('',(-3.4975,0.,1.2));+#5555 = DIRECTION('',(0.,1.,0.));+#5556 = DIRECTION('',(-1.,-0.,-0.));+#5557 = DEFINITIONAL_REPRESENTATION('',(#5558),#5562);+#5558 = LINE('',#5559,#5560);+#5559 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#5560 = VECTOR('',#5561,1.);+#5561 = DIRECTION('',(-0.,1.));+#5562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5563 = PCURVE('',#5564,#5569);+#5564 = PLANE('',#5565);+#5565 = AXIS2_PLACEMENT_3D('',#5566,#5567,#5568);+#5566 = CARTESIAN_POINT('',(-3.4975,0.,1.3));+#5567 = DIRECTION('',(0.,0.,1.));+#5568 = DIRECTION('',(1.,0.,0.));+#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5574);+#5570 = LINE('',#5571,#5572);+#5571 = CARTESIAN_POINT('',(0.,-0.18));+#5572 = VECTOR('',#5573,1.);+#5573 = DIRECTION('',(0.,1.));+#5574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5575 = ORIENTED_EDGE('',*,*,#5576,.T.);+#5576 = EDGE_CURVE('',#5542,#5577,#5579,.T.);+#5577 = VERTEX_POINT('',#5578);+#5578 = CARTESIAN_POINT('',(-3.4475,-0.18,1.286602540378));+#5579 = SURFACE_CURVE('',#5580,(#5585,#5592),.PCURVE_S1.);+#5580 = CIRCLE('',#5581,0.1);+#5581 = AXIS2_PLACEMENT_3D('',#5582,#5583,#5584);+#5582 = CARTESIAN_POINT('',(-3.4975,-0.18,1.2));+#5583 = DIRECTION('',(0.,1.,-0.));+#5584 = DIRECTION('',(-1.,0.,0.));+#5585 = PCURVE('',#5552,#5586);+#5586 = DEFINITIONAL_REPRESENTATION('',(#5587),#5591);+#5587 = LINE('',#5588,#5589);+#5588 = CARTESIAN_POINT('',(0.,-0.18));+#5589 = VECTOR('',#5590,1.);+#5590 = DIRECTION('',(1.,0.));+#5591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5592 = PCURVE('',#5593,#5598);+#5593 = PLANE('',#5594);+#5594 = AXIS2_PLACEMENT_3D('',#5595,#5596,#5597);+#5595 = CARTESIAN_POINT('',(-4.408401242914,-0.18,0.524461625949));+#5596 = DIRECTION('',(0.,1.,0.));+#5597 = DIRECTION('',(0.,0.,-1.));+#5598 = DEFINITIONAL_REPRESENTATION('',(#5599),#5603);+#5599 = CIRCLE('',#5600,0.1);+#5600 = AXIS2_PLACEMENT_2D('',#5601,#5602);+#5601 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#5602 = DIRECTION('',(0.,1.));+#5603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5604 = ORIENTED_EDGE('',*,*,#5605,.T.);+#5605 = EDGE_CURVE('',#5577,#5606,#5608,.T.);+#5606 = VERTEX_POINT('',#5607);+#5607 = CARTESIAN_POINT('',(-3.4475,0.18,1.286602540378));+#5608 = SURFACE_CURVE('',#5609,(#5613,#5620),.PCURVE_S1.);+#5609 = LINE('',#5610,#5611);+#5610 = CARTESIAN_POINT('',(-3.4475,0.,1.286602540378));+#5611 = VECTOR('',#5612,1.);+#5612 = DIRECTION('',(0.,1.,0.));+#5613 = PCURVE('',#5552,#5614);+#5614 = DEFINITIONAL_REPRESENTATION('',(#5615),#5619);+#5615 = LINE('',#5616,#5617);+#5616 = CARTESIAN_POINT('',(2.094395102393,0.));+#5617 = VECTOR('',#5618,1.);+#5618 = DIRECTION('',(0.,1.));+#5619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5620 = PCURVE('',#5621,#5626);+#5621 = PLANE('',#5622);+#5622 = AXIS2_PLACEMENT_3D('',#5623,#5624,#5625);+#5623 = CARTESIAN_POINT('',(-3.4475,-0.68,-0.5));+#5624 = DIRECTION('',(-1.,0.,0.));+#5625 = DIRECTION('',(0.,0.,-1.));+#5626 = DEFINITIONAL_REPRESENTATION('',(#5627),#5631);+#5627 = LINE('',#5628,#5629);+#5628 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#5629 = VECTOR('',#5630,1.);+#5630 = DIRECTION('',(0.,-1.));+#5631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5632 = ORIENTED_EDGE('',*,*,#5633,.F.);+#5633 = EDGE_CURVE('',#5544,#5606,#5634,.T.);+#5634 = SURFACE_CURVE('',#5635,(#5640,#5647),.PCURVE_S1.);+#5635 = CIRCLE('',#5636,0.1);+#5636 = AXIS2_PLACEMENT_3D('',#5637,#5638,#5639);+#5637 = CARTESIAN_POINT('',(-3.4975,0.18,1.2));+#5638 = DIRECTION('',(0.,1.,-0.));+#5639 = DIRECTION('',(-1.,0.,0.));+#5640 = PCURVE('',#5552,#5641);+#5641 = DEFINITIONAL_REPRESENTATION('',(#5642),#5646);+#5642 = LINE('',#5643,#5644);+#5643 = CARTESIAN_POINT('',(-0.,0.18));+#5644 = VECTOR('',#5645,1.);+#5645 = DIRECTION('',(1.,-0.));+#5646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5647 = PCURVE('',#5648,#5653);+#5648 = PLANE('',#5649);+#5649 = AXIS2_PLACEMENT_3D('',#5650,#5651,#5652);+#5650 = CARTESIAN_POINT('',(-4.408401242914,0.18,0.524461625949));+#5651 = DIRECTION('',(0.,1.,0.));+#5652 = DIRECTION('',(0.,0.,-1.));+#5653 = DEFINITIONAL_REPRESENTATION('',(#5654),#5658);+#5654 = CIRCLE('',#5655,0.1);+#5655 = AXIS2_PLACEMENT_2D('',#5656,#5657);+#5656 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#5657 = DIRECTION('',(0.,1.));+#5658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5659 = ADVANCED_FACE('',(#5660),#5564,.T.);+#5660 = FACE_BOUND('',#5661,.F.);+#5661 = EDGE_LOOP('',(#5662,#5663,#5686,#5714));+#5662 = ORIENTED_EDGE('',*,*,#5541,.F.);+#5663 = ORIENTED_EDGE('',*,*,#5664,.T.);+#5664 = EDGE_CURVE('',#5542,#5665,#5667,.T.);+#5665 = VERTEX_POINT('',#5666);+#5666 = CARTESIAN_POINT('',(-3.763569972422,-0.18,1.3));+#5667 = SURFACE_CURVE('',#5668,(#5672,#5679),.PCURVE_S1.);+#5668 = LINE('',#5669,#5670);+#5669 = CARTESIAN_POINT('',(-3.4975,-0.18,1.3));+#5670 = VECTOR('',#5671,1.);+#5671 = DIRECTION('',(-1.,-0.,-0.));+#5672 = PCURVE('',#5564,#5673);+#5673 = DEFINITIONAL_REPRESENTATION('',(#5674),#5678);+#5674 = LINE('',#5675,#5676);+#5675 = CARTESIAN_POINT('',(0.,-0.18));+#5676 = VECTOR('',#5677,1.);+#5677 = DIRECTION('',(-1.,0.));+#5678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5679 = PCURVE('',#5593,#5680);+#5680 = DEFINITIONAL_REPRESENTATION('',(#5681),#5685);+#5681 = LINE('',#5682,#5683);+#5682 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#5683 = VECTOR('',#5684,1.);+#5684 = DIRECTION('',(-0.,1.));+#5685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5686 = ORIENTED_EDGE('',*,*,#5687,.T.);+#5687 = EDGE_CURVE('',#5665,#5688,#5690,.T.);+#5688 = VERTEX_POINT('',#5689);+#5689 = CARTESIAN_POINT('',(-3.763569972422,0.18,1.3));+#5690 = SURFACE_CURVE('',#5691,(#5695,#5702),.PCURVE_S1.);+#5691 = LINE('',#5692,#5693);+#5692 = CARTESIAN_POINT('',(-3.763569972422,-0.18,1.3));+#5693 = VECTOR('',#5694,1.);+#5694 = DIRECTION('',(0.,1.,0.));+#5695 = PCURVE('',#5564,#5696);+#5696 = DEFINITIONAL_REPRESENTATION('',(#5697),#5701);+#5697 = LINE('',#5698,#5699);+#5698 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#5699 = VECTOR('',#5700,1.);+#5700 = DIRECTION('',(0.,1.));+#5701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5702 = PCURVE('',#5703,#5708);+#5703 = CYLINDRICAL_SURFACE('',#5704,0.28);+#5704 = AXIS2_PLACEMENT_3D('',#5705,#5706,#5707);+#5705 = CARTESIAN_POINT('',(-3.763569972422,0.,1.02));+#5706 = DIRECTION('',(0.,1.,0.));+#5707 = DIRECTION('',(0.,0.,1.));+#5708 = DEFINITIONAL_REPRESENTATION('',(#5709),#5713);+#5709 = LINE('',#5710,#5711);+#5710 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#5711 = VECTOR('',#5712,1.);+#5712 = DIRECTION('',(0.,1.));+#5713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5714 = ORIENTED_EDGE('',*,*,#5715,.F.);+#5715 = EDGE_CURVE('',#5544,#5688,#5716,.T.);+#5716 = SURFACE_CURVE('',#5717,(#5721,#5728),.PCURVE_S1.);+#5717 = LINE('',#5718,#5719);+#5718 = CARTESIAN_POINT('',(-3.4975,0.18,1.3));+#5719 = VECTOR('',#5720,1.);+#5720 = DIRECTION('',(-1.,-0.,-0.));+#5721 = PCURVE('',#5564,#5722);+#5722 = DEFINITIONAL_REPRESENTATION('',(#5723),#5727);+#5723 = LINE('',#5724,#5725);+#5724 = CARTESIAN_POINT('',(0.,0.18));+#5725 = VECTOR('',#5726,1.);+#5726 = DIRECTION('',(-1.,0.));+#5727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5728 = PCURVE('',#5648,#5729);+#5729 = DEFINITIONAL_REPRESENTATION('',(#5730),#5734);+#5730 = LINE('',#5731,#5732);+#5731 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#5732 = VECTOR('',#5733,1.);+#5733 = DIRECTION('',(-0.,1.));+#5734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5735 = ADVANCED_FACE('',(#5736),#5648,.T.);+#5736 = FACE_BOUND('',#5737,.F.);+#5737 = EDGE_LOOP('',(#5738,#5739,#5740,#5768,#5796,#5829,#5857,#5885,+ #5913,#5946,#5974,#6007,#6035,#6064));+#5738 = ORIENTED_EDGE('',*,*,#5633,.F.);+#5739 = ORIENTED_EDGE('',*,*,#5715,.T.);+#5740 = ORIENTED_EDGE('',*,*,#5741,.T.);+#5741 = EDGE_CURVE('',#5688,#5742,#5744,.T.);+#5742 = VERTEX_POINT('',#5743);+#5743 = CARTESIAN_POINT('',(-4.006065227246,0.18,1.159985897103));+#5744 = SURFACE_CURVE('',#5745,(#5750,#5761),.PCURVE_S1.);+#5745 = CIRCLE('',#5746,0.28);+#5746 = AXIS2_PLACEMENT_3D('',#5747,#5748,#5749);+#5747 = CARTESIAN_POINT('',(-3.763569972422,0.18,1.02));+#5748 = DIRECTION('',(0.,-1.,0.));+#5749 = DIRECTION('',(0.,0.,1.));+#5750 = PCURVE('',#5648,#5751);+#5751 = DEFINITIONAL_REPRESENTATION('',(#5752),#5760);+#5752 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5753,#5754,#5755,#5756,+#5757,#5758,#5759),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5753 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#5754 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#5755 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#5756 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#5757 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#5758 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#5759 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#5760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5761 = PCURVE('',#5703,#5762);+#5762 = DEFINITIONAL_REPRESENTATION('',(#5763),#5767);+#5763 = LINE('',#5764,#5765);+#5764 = CARTESIAN_POINT('',(6.28318530718,0.18));+#5765 = VECTOR('',#5766,1.);+#5766 = DIRECTION('',(-1.,-0.));+#5767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5768 = ORIENTED_EDGE('',*,*,#5769,.T.);+#5769 = EDGE_CURVE('',#5742,#5770,#5772,.T.);+#5770 = VERTEX_POINT('',#5771);+#5771 = CARTESIAN_POINT('',(-4.537145669057,0.18,0.240004029399));+#5772 = SURFACE_CURVE('',#5773,(#5777,#5784),.PCURVE_S1.);+#5773 = LINE('',#5774,#5775);+#5774 = CARTESIAN_POINT('',(-3.954105448151,0.18,1.249994963251));+#5775 = VECTOR('',#5776,1.);+#5776 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#5777 = PCURVE('',#5648,#5778);+#5778 = DEFINITIONAL_REPRESENTATION('',(#5779),#5783);+#5779 = LINE('',#5780,#5781);+#5780 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#5781 = VECTOR('',#5782,1.);+#5782 = DIRECTION('',(0.866054481515,0.499949632511));+#5783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5784 = PCURVE('',#5785,#5790);+#5785 = PLANE('',#5786);+#5786 = AXIS2_PLACEMENT_3D('',#5787,#5788,#5789);+#5787 = CARTESIAN_POINT('',(-4.006065227246,0.,1.159985897103));+#5788 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#5789 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#5790 = DEFINITIONAL_REPRESENTATION('',(#5791),#5795);+#5791 = LINE('',#5792,#5793);+#5792 = CARTESIAN_POINT('',(0.103930027578,0.18));+#5793 = VECTOR('',#5794,1.);+#5794 = DIRECTION('',(-1.,0.));+#5795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5796 = ORIENTED_EDGE('',*,*,#5797,.F.);+#5797 = EDGE_CURVE('',#5798,#5770,#5800,.T.);+#5798 = VERTEX_POINT('',#5799);+#5799 = CARTESIAN_POINT('',(-4.606430027578,0.18,0.2));+#5800 = SURFACE_CURVE('',#5801,(#5806,#5817),.PCURVE_S1.);+#5801 = CIRCLE('',#5802,8.E-02);+#5802 = AXIS2_PLACEMENT_3D('',#5803,#5804,#5805);+#5803 = CARTESIAN_POINT('',(-4.606430027578,0.18,0.28));+#5804 = DIRECTION('',(0.,-1.,0.));+#5805 = DIRECTION('',(0.,0.,1.));+#5806 = PCURVE('',#5648,#5807);+#5807 = DEFINITIONAL_REPRESENTATION('',(#5808),#5816);+#5808 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5809,#5810,#5811,#5812,+#5813,#5814,#5815),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5809 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#5810 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#5811 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#5812 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#5813 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#5814 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#5815 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#5816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5817 = PCURVE('',#5818,#5823);+#5818 = CYLINDRICAL_SURFACE('',#5819,8.E-02);+#5819 = AXIS2_PLACEMENT_3D('',#5820,#5821,#5822);+#5820 = CARTESIAN_POINT('',(-4.606430027578,0.,0.28));+#5821 = DIRECTION('',(0.,1.,0.));+#5822 = DIRECTION('',(0.,0.,1.));+#5823 = DEFINITIONAL_REPRESENTATION('',(#5824),#5828);+#5824 = LINE('',#5825,#5826);+#5825 = CARTESIAN_POINT('',(6.28318530718,0.18));+#5826 = VECTOR('',#5827,1.);+#5827 = DIRECTION('',(-1.,-0.));+#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5829 = ORIENTED_EDGE('',*,*,#5830,.T.);+#5830 = EDGE_CURVE('',#5798,#5831,#5833,.T.);+#5831 = VERTEX_POINT('',#5832);+#5832 = CARTESIAN_POINT('',(-5.255,0.18,0.2));+#5833 = SURFACE_CURVE('',#5834,(#5838,#5845),.PCURVE_S1.);+#5834 = LINE('',#5835,#5836);+#5835 = CARTESIAN_POINT('',(-4.5025,0.18,0.2));+#5836 = VECTOR('',#5837,1.);+#5837 = DIRECTION('',(-1.,-0.,-0.));+#5838 = PCURVE('',#5648,#5839);+#5839 = DEFINITIONAL_REPRESENTATION('',(#5840),#5844);+#5840 = LINE('',#5841,#5842);+#5841 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#5842 = VECTOR('',#5843,1.);+#5843 = DIRECTION('',(-0.,1.));+#5844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5845 = PCURVE('',#5846,#5851);+#5846 = PLANE('',#5847);+#5847 = AXIS2_PLACEMENT_3D('',#5848,#5849,#5850);+#5848 = CARTESIAN_POINT('',(-4.606430027578,0.,0.2));+#5849 = DIRECTION('',(0.,0.,1.));+#5850 = DIRECTION('',(1.,0.,0.));+#5851 = DEFINITIONAL_REPRESENTATION('',(#5852),#5856);+#5852 = LINE('',#5853,#5854);+#5853 = CARTESIAN_POINT('',(0.103930027578,0.18));+#5854 = VECTOR('',#5855,1.);+#5855 = DIRECTION('',(-1.,0.));+#5856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5857 = ORIENTED_EDGE('',*,*,#5858,.T.);+#5858 = EDGE_CURVE('',#5831,#5859,#5861,.T.);+#5859 = VERTEX_POINT('',#5860);+#5860 = CARTESIAN_POINT('',(-5.255,0.18,0.));+#5861 = SURFACE_CURVE('',#5862,(#5866,#5873),.PCURVE_S1.);+#5862 = LINE('',#5863,#5864);+#5863 = CARTESIAN_POINT('',(-5.255,0.18,1.223081297441E-02));+#5864 = VECTOR('',#5865,1.);+#5865 = DIRECTION('',(-0.,-0.,-1.));+#5866 = PCURVE('',#5648,#5867);+#5867 = DEFINITIONAL_REPRESENTATION('',(#5868),#5872);+#5868 = LINE('',#5869,#5870);+#5869 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#5870 = VECTOR('',#5871,1.);+#5871 = DIRECTION('',(1.,0.));+#5872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5873 = PCURVE('',#5874,#5879);+#5874 = PLANE('',#5875);+#5875 = AXIS2_PLACEMENT_3D('',#5876,#5877,#5878);+#5876 = CARTESIAN_POINT('',(-5.255,-0.68,-0.5));+#5877 = DIRECTION('',(-1.,0.,0.));+#5878 = DIRECTION('',(0.,0.,-1.));+#5879 = DEFINITIONAL_REPRESENTATION('',(#5880),#5884);+#5880 = LINE('',#5881,#5882);+#5881 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#5882 = VECTOR('',#5883,1.);+#5883 = DIRECTION('',(1.,0.));+#5884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5885 = ORIENTED_EDGE('',*,*,#5886,.F.);+#5886 = EDGE_CURVE('',#5887,#5859,#5889,.T.);+#5887 = VERTEX_POINT('',#5888);+#5888 = CARTESIAN_POINT('',(-4.606430027578,0.18,-5.551115123126E-17));+#5889 = SURFACE_CURVE('',#5890,(#5894,#5901),.PCURVE_S1.);+#5890 = LINE('',#5891,#5892);+#5891 = CARTESIAN_POINT('',(-4.5025,0.18,0.));+#5892 = VECTOR('',#5893,1.);+#5893 = DIRECTION('',(-1.,-0.,-0.));+#5894 = PCURVE('',#5648,#5895);+#5895 = DEFINITIONAL_REPRESENTATION('',(#5896),#5900);+#5896 = LINE('',#5897,#5898);+#5897 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#5898 = VECTOR('',#5899,1.);+#5899 = DIRECTION('',(-0.,1.));+#5900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5901 = PCURVE('',#5902,#5907);+#5902 = PLANE('',#5903);+#5903 = AXIS2_PLACEMENT_3D('',#5904,#5905,#5906);+#5904 = CARTESIAN_POINT('',(-4.606430027578,0.,0.));+#5905 = DIRECTION('',(0.,0.,1.));+#5906 = DIRECTION('',(1.,0.,0.));+#5907 = DEFINITIONAL_REPRESENTATION('',(#5908),#5912);+#5908 = LINE('',#5909,#5910);+#5909 = CARTESIAN_POINT('',(0.103930027578,0.18));+#5910 = VECTOR('',#5911,1.);+#5911 = DIRECTION('',(-1.,0.));+#5912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5913 = ORIENTED_EDGE('',*,*,#5914,.T.);+#5914 = EDGE_CURVE('',#5887,#5915,#5917,.T.);+#5915 = VERTEX_POINT('',#5916);+#5916 = CARTESIAN_POINT('',(-4.363934772754,0.18,0.140014102897));+#5917 = SURFACE_CURVE('',#5918,(#5923,#5934),.PCURVE_S1.);+#5918 = CIRCLE('',#5919,0.28);+#5919 = AXIS2_PLACEMENT_3D('',#5920,#5921,#5922);+#5920 = CARTESIAN_POINT('',(-4.606430027578,0.18,0.28));+#5921 = DIRECTION('',(0.,-1.,0.));+#5922 = DIRECTION('',(0.,0.,1.));+#5923 = PCURVE('',#5648,#5924);+#5924 = DEFINITIONAL_REPRESENTATION('',(#5925),#5933);+#5925 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5926,#5927,#5928,#5929,+#5930,#5931,#5932),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5926 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#5927 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#5928 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#5929 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#5930 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#5931 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#5932 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#5933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5934 = PCURVE('',#5935,#5940);+#5935 = CYLINDRICAL_SURFACE('',#5936,0.28);+#5936 = AXIS2_PLACEMENT_3D('',#5937,#5938,#5939);+#5937 = CARTESIAN_POINT('',(-4.606430027578,0.,0.28));+#5938 = DIRECTION('',(0.,1.,0.));+#5939 = DIRECTION('',(0.,0.,1.));+#5940 = DEFINITIONAL_REPRESENTATION('',(#5941),#5945);+#5941 = LINE('',#5942,#5943);+#5942 = CARTESIAN_POINT('',(6.28318530718,0.18));+#5943 = VECTOR('',#5944,1.);+#5944 = DIRECTION('',(-1.,-0.));+#5945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5946 = ORIENTED_EDGE('',*,*,#5947,.F.);+#5947 = EDGE_CURVE('',#5948,#5915,#5950,.T.);+#5948 = VERTEX_POINT('',#5949);+#5949 = CARTESIAN_POINT('',(-3.832854330943,0.18,1.059995970601));+#5950 = SURFACE_CURVE('',#5951,(#5955,#5962),.PCURVE_S1.);+#5951 = LINE('',#5952,#5953);+#5952 = CARTESIAN_POINT('',(-3.780894551849,0.18,1.150005036749));+#5953 = VECTOR('',#5954,1.);+#5954 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#5955 = PCURVE('',#5648,#5956);+#5956 = DEFINITIONAL_REPRESENTATION('',(#5957),#5961);+#5957 = LINE('',#5958,#5959);+#5958 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#5959 = VECTOR('',#5960,1.);+#5960 = DIRECTION('',(0.866054481515,0.499949632511));+#5961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5962 = PCURVE('',#5963,#5968);+#5963 = PLANE('',#5964);+#5964 = AXIS2_PLACEMENT_3D('',#5965,#5966,#5967);+#5965 = CARTESIAN_POINT('',(-3.832854330943,0.,1.059995970601));+#5966 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#5967 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#5968 = DEFINITIONAL_REPRESENTATION('',(#5969),#5973);+#5969 = LINE('',#5970,#5971);+#5970 = CARTESIAN_POINT('',(0.103930027578,0.18));+#5971 = VECTOR('',#5972,1.);+#5972 = DIRECTION('',(-1.,0.));+#5973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5974 = ORIENTED_EDGE('',*,*,#5975,.F.);+#5975 = EDGE_CURVE('',#5976,#5948,#5978,.T.);+#5976 = VERTEX_POINT('',#5977);+#5977 = CARTESIAN_POINT('',(-3.763569972422,0.18,1.1));+#5978 = SURFACE_CURVE('',#5979,(#5984,#5995),.PCURVE_S1.);+#5979 = CIRCLE('',#5980,8.E-02);+#5980 = AXIS2_PLACEMENT_3D('',#5981,#5982,#5983);+#5981 = CARTESIAN_POINT('',(-3.763569972422,0.18,1.02));+#5982 = DIRECTION('',(0.,-1.,0.));+#5983 = DIRECTION('',(0.,0.,1.));+#5984 = PCURVE('',#5648,#5985);+#5985 = DEFINITIONAL_REPRESENTATION('',(#5986),#5994);+#5986 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5987,#5988,#5989,#5990,+#5991,#5992,#5993),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5987 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#5988 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#5989 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#5990 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#5991 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#5992 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#5993 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#5994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5995 = PCURVE('',#5996,#6001);+#5996 = CYLINDRICAL_SURFACE('',#5997,8.E-02);+#5997 = AXIS2_PLACEMENT_3D('',#5998,#5999,#6000);+#5998 = CARTESIAN_POINT('',(-3.763569972422,0.,1.02));+#5999 = DIRECTION('',(0.,1.,0.));+#6000 = DIRECTION('',(0.,0.,1.));+#6001 = DEFINITIONAL_REPRESENTATION('',(#6002),#6006);+#6002 = LINE('',#6003,#6004);+#6003 = CARTESIAN_POINT('',(6.28318530718,0.18));+#6004 = VECTOR('',#6005,1.);+#6005 = DIRECTION('',(-1.,-0.));+#6006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6007 = ORIENTED_EDGE('',*,*,#6008,.F.);+#6008 = EDGE_CURVE('',#6009,#5976,#6011,.T.);+#6009 = VERTEX_POINT('',#6010);+#6010 = CARTESIAN_POINT('',(-3.4975,0.18,1.1));+#6011 = SURFACE_CURVE('',#6012,(#6016,#6023),.PCURVE_S1.);+#6012 = LINE('',#6013,#6014);+#6013 = CARTESIAN_POINT('',(-3.4975,0.18,1.1));+#6014 = VECTOR('',#6015,1.);+#6015 = DIRECTION('',(-1.,-0.,-0.));+#6016 = PCURVE('',#5648,#6017);+#6017 = DEFINITIONAL_REPRESENTATION('',(#6018),#6022);+#6018 = LINE('',#6019,#6020);+#6019 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#6020 = VECTOR('',#6021,1.);+#6021 = DIRECTION('',(-0.,1.));+#6022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6023 = PCURVE('',#6024,#6029);+#6024 = PLANE('',#6025);+#6025 = AXIS2_PLACEMENT_3D('',#6026,#6027,#6028);+#6026 = CARTESIAN_POINT('',(-3.4975,0.,1.1));+#6027 = DIRECTION('',(0.,0.,1.));+#6028 = DIRECTION('',(1.,0.,0.));+#6029 = DEFINITIONAL_REPRESENTATION('',(#6030),#6034);+#6030 = LINE('',#6031,#6032);+#6031 = CARTESIAN_POINT('',(0.,0.18));+#6032 = VECTOR('',#6033,1.);+#6033 = DIRECTION('',(-1.,0.));+#6034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6035 = ORIENTED_EDGE('',*,*,#6036,.F.);+#6036 = EDGE_CURVE('',#6037,#6009,#6039,.T.);+#6037 = VERTEX_POINT('',#6038);+#6038 = CARTESIAN_POINT('',(-3.4475,0.18,1.113397459622));+#6039 = SURFACE_CURVE('',#6040,(#6045,#6052),.PCURVE_S1.);+#6040 = CIRCLE('',#6041,0.1);+#6041 = AXIS2_PLACEMENT_3D('',#6042,#6043,#6044);+#6042 = CARTESIAN_POINT('',(-3.4975,0.18,1.2));+#6043 = DIRECTION('',(0.,1.,-0.));+#6044 = DIRECTION('',(-1.,0.,0.));+#6045 = PCURVE('',#5648,#6046);+#6046 = DEFINITIONAL_REPRESENTATION('',(#6047),#6051);+#6047 = CIRCLE('',#6048,0.1);+#6048 = AXIS2_PLACEMENT_2D('',#6049,#6050);+#6049 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#6050 = DIRECTION('',(0.,1.));+#6051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6052 = PCURVE('',#6053,#6058);+#6053 = CYLINDRICAL_SURFACE('',#6054,0.1);+#6054 = AXIS2_PLACEMENT_3D('',#6055,#6056,#6057);+#6055 = CARTESIAN_POINT('',(-3.4975,0.,1.2));+#6056 = DIRECTION('',(0.,1.,0.));+#6057 = DIRECTION('',(-1.,-0.,-0.));+#6058 = DEFINITIONAL_REPRESENTATION('',(#6059),#6063);+#6059 = LINE('',#6060,#6061);+#6060 = CARTESIAN_POINT('',(-0.,0.18));+#6061 = VECTOR('',#6062,1.);+#6062 = DIRECTION('',(1.,-0.));+#6063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6064 = ORIENTED_EDGE('',*,*,#6065,.F.);+#6065 = EDGE_CURVE('',#5606,#6037,#6066,.T.);+#6066 = SURFACE_CURVE('',#6067,(#6071,#6078),.PCURVE_S1.);+#6067 = LINE('',#6068,#6069);+#6068 = CARTESIAN_POINT('',(-3.4475,0.18,1.223081297441E-02));+#6069 = VECTOR('',#6070,1.);+#6070 = DIRECTION('',(-0.,-0.,-1.));+#6071 = PCURVE('',#5648,#6072);+#6072 = DEFINITIONAL_REPRESENTATION('',(#6073),#6077);+#6073 = LINE('',#6074,#6075);+#6074 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#6075 = VECTOR('',#6076,1.);+#6076 = DIRECTION('',(1.,0.));+#6077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6078 = PCURVE('',#5621,#6079);+#6079 = DEFINITIONAL_REPRESENTATION('',(#6080),#6084);+#6080 = LINE('',#6081,#6082);+#6081 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#6082 = VECTOR('',#6083,1.);+#6083 = DIRECTION('',(1.,0.));+#6084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6085 = ADVANCED_FACE('',(#6086),#5621,.F.);+#6086 = FACE_BOUND('',#6087,.T.);+#6087 = EDGE_LOOP('',(#6088,#6089,#6112,#6133));+#6088 = ORIENTED_EDGE('',*,*,#5605,.F.);+#6089 = ORIENTED_EDGE('',*,*,#6090,.T.);+#6090 = EDGE_CURVE('',#5577,#6091,#6093,.T.);+#6091 = VERTEX_POINT('',#6092);+#6092 = CARTESIAN_POINT('',(-3.4475,-0.18,1.113397459622));+#6093 = SURFACE_CURVE('',#6094,(#6098,#6105),.PCURVE_S1.);+#6094 = LINE('',#6095,#6096);+#6095 = CARTESIAN_POINT('',(-3.4475,-0.18,1.223081297441E-02));+#6096 = VECTOR('',#6097,1.);+#6097 = DIRECTION('',(-0.,-0.,-1.));+#6098 = PCURVE('',#5621,#6099);+#6099 = DEFINITIONAL_REPRESENTATION('',(#6100),#6104);+#6100 = LINE('',#6101,#6102);+#6101 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#6102 = VECTOR('',#6103,1.);+#6103 = DIRECTION('',(1.,0.));+#6104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6105 = PCURVE('',#5593,#6106);+#6106 = DEFINITIONAL_REPRESENTATION('',(#6107),#6111);+#6107 = LINE('',#6108,#6109);+#6108 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#6109 = VECTOR('',#6110,1.);+#6110 = DIRECTION('',(1.,0.));+#6111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6112 = ORIENTED_EDGE('',*,*,#6113,.T.);+#6113 = EDGE_CURVE('',#6091,#6037,#6114,.T.);+#6114 = SURFACE_CURVE('',#6115,(#6119,#6126),.PCURVE_S1.);+#6115 = LINE('',#6116,#6117);+#6116 = CARTESIAN_POINT('',(-3.4475,0.,1.113397459622));+#6117 = VECTOR('',#6118,1.);+#6118 = DIRECTION('',(0.,1.,0.));+#6119 = PCURVE('',#5621,#6120);+#6120 = DEFINITIONAL_REPRESENTATION('',(#6121),#6125);+#6121 = LINE('',#6122,#6123);+#6122 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#6123 = VECTOR('',#6124,1.);+#6124 = DIRECTION('',(0.,-1.));+#6125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6126 = PCURVE('',#6053,#6127);+#6127 = DEFINITIONAL_REPRESENTATION('',(#6128),#6132);+#6128 = LINE('',#6129,#6130);+#6129 = CARTESIAN_POINT('',(4.188790204786,0.));+#6130 = VECTOR('',#6131,1.);+#6131 = DIRECTION('',(0.,1.));+#6132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6133 = ORIENTED_EDGE('',*,*,#6065,.F.);+#6134 = ADVANCED_FACE('',(#6135),#5593,.F.);+#6135 = FACE_BOUND('',#6136,.T.);+#6136 = EDGE_LOOP('',(#6137,#6138,#6139,#6167,#6190,#6218,#6241,#6264,+ #6287,#6315,#6338,#6366,#6389,#6411));+#6137 = ORIENTED_EDGE('',*,*,#5576,.F.);+#6138 = ORIENTED_EDGE('',*,*,#5664,.T.);+#6139 = ORIENTED_EDGE('',*,*,#6140,.T.);+#6140 = EDGE_CURVE('',#5665,#6141,#6143,.T.);+#6141 = VERTEX_POINT('',#6142);+#6142 = CARTESIAN_POINT('',(-4.006065227246,-0.18,1.159985897103));+#6143 = SURFACE_CURVE('',#6144,(#6149,#6160),.PCURVE_S1.);+#6144 = CIRCLE('',#6145,0.28);+#6145 = AXIS2_PLACEMENT_3D('',#6146,#6147,#6148);+#6146 = CARTESIAN_POINT('',(-3.763569972422,-0.18,1.02));+#6147 = DIRECTION('',(0.,-1.,0.));+#6148 = DIRECTION('',(0.,0.,1.));+#6149 = PCURVE('',#5593,#6150);+#6150 = DEFINITIONAL_REPRESENTATION('',(#6151),#6159);+#6151 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6152,#6153,#6154,#6155,+#6156,#6157,#6158),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6152 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#6153 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#6154 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#6155 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#6156 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#6157 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#6158 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#6159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6160 = PCURVE('',#5703,#6161);+#6161 = DEFINITIONAL_REPRESENTATION('',(#6162),#6166);+#6162 = LINE('',#6163,#6164);+#6163 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#6164 = VECTOR('',#6165,1.);+#6165 = DIRECTION('',(-1.,0.));+#6166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6167 = ORIENTED_EDGE('',*,*,#6168,.T.);+#6168 = EDGE_CURVE('',#6141,#6169,#6171,.T.);+#6169 = VERTEX_POINT('',#6170);+#6170 = CARTESIAN_POINT('',(-4.537145669057,-0.18,0.240004029399));+#6171 = SURFACE_CURVE('',#6172,(#6176,#6183),.PCURVE_S1.);+#6172 = LINE('',#6173,#6174);+#6173 = CARTESIAN_POINT('',(-3.954105448151,-0.18,1.249994963251));+#6174 = VECTOR('',#6175,1.);+#6175 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#6176 = PCURVE('',#5593,#6177);+#6177 = DEFINITIONAL_REPRESENTATION('',(#6178),#6182);+#6178 = LINE('',#6179,#6180);+#6179 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#6180 = VECTOR('',#6181,1.);+#6181 = DIRECTION('',(0.866054481515,0.499949632511));+#6182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6183 = PCURVE('',#5785,#6184);+#6184 = DEFINITIONAL_REPRESENTATION('',(#6185),#6189);+#6185 = LINE('',#6186,#6187);+#6186 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#6187 = VECTOR('',#6188,1.);+#6188 = DIRECTION('',(-1.,0.));+#6189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6190 = ORIENTED_EDGE('',*,*,#6191,.F.);+#6191 = EDGE_CURVE('',#6192,#6169,#6194,.T.);+#6192 = VERTEX_POINT('',#6193);+#6193 = CARTESIAN_POINT('',(-4.606430027578,-0.18,0.2));+#6194 = SURFACE_CURVE('',#6195,(#6200,#6211),.PCURVE_S1.);+#6195 = CIRCLE('',#6196,8.E-02);+#6196 = AXIS2_PLACEMENT_3D('',#6197,#6198,#6199);+#6197 = CARTESIAN_POINT('',(-4.606430027578,-0.18,0.28));+#6198 = DIRECTION('',(0.,-1.,0.));+#6199 = DIRECTION('',(0.,0.,1.));+#6200 = PCURVE('',#5593,#6201);+#6201 = DEFINITIONAL_REPRESENTATION('',(#6202),#6210);+#6202 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6203,#6204,#6205,#6206,+#6207,#6208,#6209),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6203 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#6204 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#6205 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#6206 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#6207 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#6208 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#6209 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#6210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6211 = PCURVE('',#5818,#6212);+#6212 = DEFINITIONAL_REPRESENTATION('',(#6213),#6217);+#6213 = LINE('',#6214,#6215);+#6214 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#6215 = VECTOR('',#6216,1.);+#6216 = DIRECTION('',(-1.,0.));+#6217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6218 = ORIENTED_EDGE('',*,*,#6219,.T.);+#6219 = EDGE_CURVE('',#6192,#6220,#6222,.T.);+#6220 = VERTEX_POINT('',#6221);+#6221 = CARTESIAN_POINT('',(-5.255,-0.18,0.2));+#6222 = SURFACE_CURVE('',#6223,(#6227,#6234),.PCURVE_S1.);+#6223 = LINE('',#6224,#6225);+#6224 = CARTESIAN_POINT('',(-4.5025,-0.18,0.2));+#6225 = VECTOR('',#6226,1.);+#6226 = DIRECTION('',(-1.,-0.,-0.));+#6227 = PCURVE('',#5593,#6228);+#6228 = DEFINITIONAL_REPRESENTATION('',(#6229),#6233);+#6229 = LINE('',#6230,#6231);+#6230 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#6231 = VECTOR('',#6232,1.);+#6232 = DIRECTION('',(-0.,1.));+#6233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6234 = PCURVE('',#5846,#6235);+#6235 = DEFINITIONAL_REPRESENTATION('',(#6236),#6240);+#6236 = LINE('',#6237,#6238);+#6237 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#6238 = VECTOR('',#6239,1.);+#6239 = DIRECTION('',(-1.,0.));+#6240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6241 = ORIENTED_EDGE('',*,*,#6242,.T.);+#6242 = EDGE_CURVE('',#6220,#6243,#6245,.T.);+#6243 = VERTEX_POINT('',#6244);+#6244 = CARTESIAN_POINT('',(-5.255,-0.18,0.));+#6245 = SURFACE_CURVE('',#6246,(#6250,#6257),.PCURVE_S1.);+#6246 = LINE('',#6247,#6248);+#6247 = CARTESIAN_POINT('',(-5.255,-0.18,1.223081297441E-02));+#6248 = VECTOR('',#6249,1.);+#6249 = DIRECTION('',(-0.,-0.,-1.));+#6250 = PCURVE('',#5593,#6251);+#6251 = DEFINITIONAL_REPRESENTATION('',(#6252),#6256);+#6252 = LINE('',#6253,#6254);+#6253 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#6254 = VECTOR('',#6255,1.);+#6255 = DIRECTION('',(1.,0.));+#6256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6257 = PCURVE('',#5874,#6258);+#6258 = DEFINITIONAL_REPRESENTATION('',(#6259),#6263);+#6259 = LINE('',#6260,#6261);+#6260 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#6261 = VECTOR('',#6262,1.);+#6262 = DIRECTION('',(1.,0.));+#6263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6264 = ORIENTED_EDGE('',*,*,#6265,.F.);+#6265 = EDGE_CURVE('',#6266,#6243,#6268,.T.);+#6266 = VERTEX_POINT('',#6267);+#6267 = CARTESIAN_POINT('',(-4.606430027578,-0.18,-5.551115123126E-17));+#6268 = SURFACE_CURVE('',#6269,(#6273,#6280),.PCURVE_S1.);+#6269 = LINE('',#6270,#6271);+#6270 = CARTESIAN_POINT('',(-4.5025,-0.18,0.));+#6271 = VECTOR('',#6272,1.);+#6272 = DIRECTION('',(-1.,-0.,-0.));+#6273 = PCURVE('',#5593,#6274);+#6274 = DEFINITIONAL_REPRESENTATION('',(#6275),#6279);+#6275 = LINE('',#6276,#6277);+#6276 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#6277 = VECTOR('',#6278,1.);+#6278 = DIRECTION('',(-0.,1.));+#6279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6280 = PCURVE('',#5902,#6281);+#6281 = DEFINITIONAL_REPRESENTATION('',(#6282),#6286);+#6282 = LINE('',#6283,#6284);+#6283 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#6284 = VECTOR('',#6285,1.);+#6285 = DIRECTION('',(-1.,0.));+#6286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6287 = ORIENTED_EDGE('',*,*,#6288,.T.);+#6288 = EDGE_CURVE('',#6266,#6289,#6291,.T.);+#6289 = VERTEX_POINT('',#6290);+#6290 = CARTESIAN_POINT('',(-4.363934772754,-0.18,0.140014102897));+#6291 = SURFACE_CURVE('',#6292,(#6297,#6308),.PCURVE_S1.);+#6292 = CIRCLE('',#6293,0.28);+#6293 = AXIS2_PLACEMENT_3D('',#6294,#6295,#6296);+#6294 = CARTESIAN_POINT('',(-4.606430027578,-0.18,0.28));+#6295 = DIRECTION('',(0.,-1.,0.));+#6296 = DIRECTION('',(0.,0.,1.));+#6297 = PCURVE('',#5593,#6298);+#6298 = DEFINITIONAL_REPRESENTATION('',(#6299),#6307);+#6299 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6300,#6301,#6302,#6303,+#6304,#6305,#6306),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6300 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#6301 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#6302 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#6303 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#6304 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#6305 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#6306 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#6307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6308 = PCURVE('',#5935,#6309);+#6309 = DEFINITIONAL_REPRESENTATION('',(#6310),#6314);+#6310 = LINE('',#6311,#6312);+#6311 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#6312 = VECTOR('',#6313,1.);+#6313 = DIRECTION('',(-1.,0.));+#6314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6315 = ORIENTED_EDGE('',*,*,#6316,.F.);+#6316 = EDGE_CURVE('',#6317,#6289,#6319,.T.);+#6317 = VERTEX_POINT('',#6318);+#6318 = CARTESIAN_POINT('',(-3.832854330943,-0.18,1.059995970601));+#6319 = SURFACE_CURVE('',#6320,(#6324,#6331),.PCURVE_S1.);+#6320 = LINE('',#6321,#6322);+#6321 = CARTESIAN_POINT('',(-3.780894551849,-0.18,1.150005036749));+#6322 = VECTOR('',#6323,1.);+#6323 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#6324 = PCURVE('',#5593,#6325);+#6325 = DEFINITIONAL_REPRESENTATION('',(#6326),#6330);+#6326 = LINE('',#6327,#6328);+#6327 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#6328 = VECTOR('',#6329,1.);+#6329 = DIRECTION('',(0.866054481515,0.499949632511));+#6330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6331 = PCURVE('',#5963,#6332);+#6332 = DEFINITIONAL_REPRESENTATION('',(#6333),#6337);+#6333 = LINE('',#6334,#6335);+#6334 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#6335 = VECTOR('',#6336,1.);+#6336 = DIRECTION('',(-1.,0.));+#6337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6338 = ORIENTED_EDGE('',*,*,#6339,.F.);+#6339 = EDGE_CURVE('',#6340,#6317,#6342,.T.);+#6340 = VERTEX_POINT('',#6341);+#6341 = CARTESIAN_POINT('',(-3.763569972422,-0.18,1.1));+#6342 = SURFACE_CURVE('',#6343,(#6348,#6359),.PCURVE_S1.);+#6343 = CIRCLE('',#6344,8.E-02);+#6344 = AXIS2_PLACEMENT_3D('',#6345,#6346,#6347);+#6345 = CARTESIAN_POINT('',(-3.763569972422,-0.18,1.02));+#6346 = DIRECTION('',(0.,-1.,0.));+#6347 = DIRECTION('',(0.,0.,1.));+#6348 = PCURVE('',#5593,#6349);+#6349 = DEFINITIONAL_REPRESENTATION('',(#6350),#6358);+#6350 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6351,#6352,#6353,#6354,+#6355,#6356,#6357),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6351 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#6352 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#6353 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#6354 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#6355 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#6356 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#6357 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#6358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6359 = PCURVE('',#5996,#6360);+#6360 = DEFINITIONAL_REPRESENTATION('',(#6361),#6365);+#6361 = LINE('',#6362,#6363);+#6362 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#6363 = VECTOR('',#6364,1.);+#6364 = DIRECTION('',(-1.,0.));+#6365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6366 = ORIENTED_EDGE('',*,*,#6367,.F.);+#6367 = EDGE_CURVE('',#6368,#6340,#6370,.T.);+#6368 = VERTEX_POINT('',#6369);+#6369 = CARTESIAN_POINT('',(-3.4975,-0.18,1.1));+#6370 = SURFACE_CURVE('',#6371,(#6375,#6382),.PCURVE_S1.);+#6371 = LINE('',#6372,#6373);+#6372 = CARTESIAN_POINT('',(-3.4975,-0.18,1.1));+#6373 = VECTOR('',#6374,1.);+#6374 = DIRECTION('',(-1.,-0.,-0.));+#6375 = PCURVE('',#5593,#6376);+#6376 = DEFINITIONAL_REPRESENTATION('',(#6377),#6381);+#6377 = LINE('',#6378,#6379);+#6378 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#6379 = VECTOR('',#6380,1.);+#6380 = DIRECTION('',(-0.,1.));+#6381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6382 = PCURVE('',#6024,#6383);+#6383 = DEFINITIONAL_REPRESENTATION('',(#6384),#6388);+#6384 = LINE('',#6385,#6386);+#6385 = CARTESIAN_POINT('',(0.,-0.18));+#6386 = VECTOR('',#6387,1.);+#6387 = DIRECTION('',(-1.,0.));+#6388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6389 = ORIENTED_EDGE('',*,*,#6390,.F.);+#6390 = EDGE_CURVE('',#6091,#6368,#6391,.T.);+#6391 = SURFACE_CURVE('',#6392,(#6397,#6404),.PCURVE_S1.);+#6392 = CIRCLE('',#6393,0.1);+#6393 = AXIS2_PLACEMENT_3D('',#6394,#6395,#6396);+#6394 = CARTESIAN_POINT('',(-3.4975,-0.18,1.2));+#6395 = DIRECTION('',(0.,1.,-0.));+#6396 = DIRECTION('',(-1.,0.,0.));+#6397 = PCURVE('',#5593,#6398);+#6398 = DEFINITIONAL_REPRESENTATION('',(#6399),#6403);+#6399 = CIRCLE('',#6400,0.1);+#6400 = AXIS2_PLACEMENT_2D('',#6401,#6402);+#6401 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#6402 = DIRECTION('',(0.,1.));+#6403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6404 = PCURVE('',#6053,#6405);+#6405 = DEFINITIONAL_REPRESENTATION('',(#6406),#6410);+#6406 = LINE('',#6407,#6408);+#6407 = CARTESIAN_POINT('',(0.,-0.18));+#6408 = VECTOR('',#6409,1.);+#6409 = DIRECTION('',(1.,0.));+#6410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6411 = ORIENTED_EDGE('',*,*,#6090,.F.);+#6412 = ADVANCED_FACE('',(#6413),#5703,.T.);+#6413 = FACE_BOUND('',#6414,.T.);+#6414 = EDGE_LOOP('',(#6415,#6416,#6437,#6438));+#6415 = ORIENTED_EDGE('',*,*,#5741,.T.);+#6416 = ORIENTED_EDGE('',*,*,#6417,.F.);+#6417 = EDGE_CURVE('',#6141,#5742,#6418,.T.);+#6418 = SURFACE_CURVE('',#6419,(#6423,#6430),.PCURVE_S1.);+#6419 = LINE('',#6420,#6421);+#6420 = CARTESIAN_POINT('',(-4.006065227246,-0.18,1.159985897103));+#6421 = VECTOR('',#6422,1.);+#6422 = DIRECTION('',(0.,1.,0.));+#6423 = PCURVE('',#5703,#6424);+#6424 = DEFINITIONAL_REPRESENTATION('',(#6425),#6429);+#6425 = LINE('',#6426,#6427);+#6426 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#6427 = VECTOR('',#6428,1.);+#6428 = DIRECTION('',(0.,1.));+#6429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6430 = PCURVE('',#5785,#6431);+#6431 = DEFINITIONAL_REPRESENTATION('',(#6432),#6436);+#6432 = LINE('',#6433,#6434);+#6433 = CARTESIAN_POINT('',(0.,-0.18));+#6434 = VECTOR('',#6435,1.);+#6435 = DIRECTION('',(0.,1.));+#6436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6437 = ORIENTED_EDGE('',*,*,#6140,.F.);+#6438 = ORIENTED_EDGE('',*,*,#5687,.T.);+#6439 = ADVANCED_FACE('',(#6440),#6053,.T.);+#6440 = FACE_BOUND('',#6441,.T.);+#6441 = EDGE_LOOP('',(#6442,#6443,#6444,#6465));+#6442 = ORIENTED_EDGE('',*,*,#6113,.F.);+#6443 = ORIENTED_EDGE('',*,*,#6390,.T.);+#6444 = ORIENTED_EDGE('',*,*,#6445,.F.);+#6445 = EDGE_CURVE('',#6009,#6368,#6446,.T.);+#6446 = SURFACE_CURVE('',#6447,(#6451,#6458),.PCURVE_S1.);+#6447 = LINE('',#6448,#6449);+#6448 = CARTESIAN_POINT('',(-3.4975,0.18,1.1));+#6449 = VECTOR('',#6450,1.);+#6450 = DIRECTION('',(-0.,-1.,-0.));+#6451 = PCURVE('',#6053,#6452);+#6452 = DEFINITIONAL_REPRESENTATION('',(#6453),#6457);+#6453 = LINE('',#6454,#6455);+#6454 = CARTESIAN_POINT('',(4.712388980385,0.18));+#6455 = VECTOR('',#6456,1.);+#6456 = DIRECTION('',(0.,-1.));+#6457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6458 = PCURVE('',#6024,#6459);+#6459 = DEFINITIONAL_REPRESENTATION('',(#6460),#6464);+#6460 = LINE('',#6461,#6462);+#6461 = CARTESIAN_POINT('',(0.,0.18));+#6462 = VECTOR('',#6463,1.);+#6463 = DIRECTION('',(0.,-1.));+#6464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6465 = ORIENTED_EDGE('',*,*,#6036,.F.);+#6466 = ADVANCED_FACE('',(#6467),#6024,.F.);+#6467 = FACE_BOUND('',#6468,.T.);+#6468 = EDGE_LOOP('',(#6469,#6470,#6491,#6492));+#6469 = ORIENTED_EDGE('',*,*,#6367,.T.);+#6470 = ORIENTED_EDGE('',*,*,#6471,.F.);+#6471 = EDGE_CURVE('',#5976,#6340,#6472,.T.);+#6472 = SURFACE_CURVE('',#6473,(#6477,#6484),.PCURVE_S1.);+#6473 = LINE('',#6474,#6475);+#6474 = CARTESIAN_POINT('',(-3.763569972422,0.18,1.1));+#6475 = VECTOR('',#6476,1.);+#6476 = DIRECTION('',(-0.,-1.,-0.));+#6477 = PCURVE('',#6024,#6478);+#6478 = DEFINITIONAL_REPRESENTATION('',(#6479),#6483);+#6479 = LINE('',#6480,#6481);+#6480 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#6481 = VECTOR('',#6482,1.);+#6482 = DIRECTION('',(0.,-1.));+#6483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6484 = PCURVE('',#5996,#6485);+#6485 = DEFINITIONAL_REPRESENTATION('',(#6486),#6490);+#6486 = LINE('',#6487,#6488);+#6487 = CARTESIAN_POINT('',(6.28318530718,0.18));+#6488 = VECTOR('',#6489,1.);+#6489 = DIRECTION('',(-0.,-1.));+#6490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6491 = ORIENTED_EDGE('',*,*,#6008,.F.);+#6492 = ORIENTED_EDGE('',*,*,#6445,.T.);+#6493 = ADVANCED_FACE('',(#6494),#5996,.F.);+#6494 = FACE_BOUND('',#6495,.F.);+#6495 = EDGE_LOOP('',(#6496,#6497,#6498,#6519));+#6496 = ORIENTED_EDGE('',*,*,#6471,.F.);+#6497 = ORIENTED_EDGE('',*,*,#5975,.T.);+#6498 = ORIENTED_EDGE('',*,*,#6499,.T.);+#6499 = EDGE_CURVE('',#5948,#6317,#6500,.T.);+#6500 = SURFACE_CURVE('',#6501,(#6505,#6512),.PCURVE_S1.);+#6501 = LINE('',#6502,#6503);+#6502 = CARTESIAN_POINT('',(-3.832854330943,0.18,1.059995970601));+#6503 = VECTOR('',#6504,1.);+#6504 = DIRECTION('',(-0.,-1.,-0.));+#6505 = PCURVE('',#5996,#6506);+#6506 = DEFINITIONAL_REPRESENTATION('',(#6507),#6511);+#6507 = LINE('',#6508,#6509);+#6508 = CARTESIAN_POINT('',(5.235929597593,0.18));+#6509 = VECTOR('',#6510,1.);+#6510 = DIRECTION('',(-0.,-1.));+#6511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6512 = PCURVE('',#5963,#6513);+#6513 = DEFINITIONAL_REPRESENTATION('',(#6514),#6518);+#6514 = LINE('',#6515,#6516);+#6515 = CARTESIAN_POINT('',(0.,0.18));+#6516 = VECTOR('',#6517,1.);+#6517 = DIRECTION('',(0.,-1.));+#6518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6519 = ORIENTED_EDGE('',*,*,#6339,.F.);+#6520 = ADVANCED_FACE('',(#6521),#5963,.F.);+#6521 = FACE_BOUND('',#6522,.T.);+#6522 = EDGE_LOOP('',(#6523,#6524,#6545,#6546));+#6523 = ORIENTED_EDGE('',*,*,#6316,.T.);+#6524 = ORIENTED_EDGE('',*,*,#6525,.F.);+#6525 = EDGE_CURVE('',#5915,#6289,#6526,.T.);+#6526 = SURFACE_CURVE('',#6527,(#6531,#6538),.PCURVE_S1.);+#6527 = LINE('',#6528,#6529);+#6528 = CARTESIAN_POINT('',(-4.363934772754,0.18,0.140014102897));+#6529 = VECTOR('',#6530,1.);+#6530 = DIRECTION('',(-0.,-1.,-0.));+#6531 = PCURVE('',#5963,#6532);+#6532 = DEFINITIONAL_REPRESENTATION('',(#6533),#6537);+#6533 = LINE('',#6534,#6535);+#6534 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#6535 = VECTOR('',#6536,1.);+#6536 = DIRECTION('',(0.,-1.));+#6537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6538 = PCURVE('',#5935,#6539);+#6539 = DEFINITIONAL_REPRESENTATION('',(#6540),#6544);+#6540 = LINE('',#6541,#6542);+#6541 = CARTESIAN_POINT('',(2.094336944003,0.18));+#6542 = VECTOR('',#6543,1.);+#6543 = DIRECTION('',(-0.,-1.));+#6544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6545 = ORIENTED_EDGE('',*,*,#5947,.F.);+#6546 = ORIENTED_EDGE('',*,*,#6499,.T.);+#6547 = ADVANCED_FACE('',(#6548),#5935,.T.);+#6548 = FACE_BOUND('',#6549,.T.);+#6549 = EDGE_LOOP('',(#6550,#6571,#6572,#6573));+#6550 = ORIENTED_EDGE('',*,*,#6551,.F.);+#6551 = EDGE_CURVE('',#5887,#6266,#6552,.T.);+#6552 = SURFACE_CURVE('',#6553,(#6557,#6564),.PCURVE_S1.);+#6553 = LINE('',#6554,#6555);+#6554 = CARTESIAN_POINT('',(-4.606430027578,0.18,-5.551115123126E-17));+#6555 = VECTOR('',#6556,1.);+#6556 = DIRECTION('',(-0.,-1.,-0.));+#6557 = PCURVE('',#5935,#6558);+#6558 = DEFINITIONAL_REPRESENTATION('',(#6559),#6563);+#6559 = LINE('',#6560,#6561);+#6560 = CARTESIAN_POINT('',(3.14159265359,0.18));+#6561 = VECTOR('',#6562,1.);+#6562 = DIRECTION('',(-0.,-1.));+#6563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6564 = PCURVE('',#5902,#6565);+#6565 = DEFINITIONAL_REPRESENTATION('',(#6566),#6570);+#6566 = LINE('',#6567,#6568);+#6567 = CARTESIAN_POINT('',(0.,0.18));+#6568 = VECTOR('',#6569,1.);+#6569 = DIRECTION('',(0.,-1.));+#6570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6571 = ORIENTED_EDGE('',*,*,#5914,.T.);+#6572 = ORIENTED_EDGE('',*,*,#6525,.T.);+#6573 = ORIENTED_EDGE('',*,*,#6288,.F.);+#6574 = ADVANCED_FACE('',(#6575),#5902,.F.);+#6575 = FACE_BOUND('',#6576,.T.);+#6576 = EDGE_LOOP('',(#6577,#6578,#6579,#6600));+#6577 = ORIENTED_EDGE('',*,*,#6551,.T.);+#6578 = ORIENTED_EDGE('',*,*,#6265,.T.);+#6579 = ORIENTED_EDGE('',*,*,#6580,.T.);+#6580 = EDGE_CURVE('',#6243,#5859,#6581,.T.);+#6581 = SURFACE_CURVE('',#6582,(#6586,#6593),.PCURVE_S1.);+#6582 = LINE('',#6583,#6584);+#6583 = CARTESIAN_POINT('',(-5.255,-0.34,0.));+#6584 = VECTOR('',#6585,1.);+#6585 = DIRECTION('',(0.,1.,0.));+#6586 = PCURVE('',#5902,#6587);+#6587 = DEFINITIONAL_REPRESENTATION('',(#6588),#6592);+#6588 = LINE('',#6589,#6590);+#6589 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#6590 = VECTOR('',#6591,1.);+#6591 = DIRECTION('',(0.,1.));+#6592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6593 = PCURVE('',#5874,#6594);+#6594 = DEFINITIONAL_REPRESENTATION('',(#6595),#6599);+#6595 = LINE('',#6596,#6597);+#6596 = CARTESIAN_POINT('',(-0.5,-0.34));+#6597 = VECTOR('',#6598,1.);+#6598 = DIRECTION('',(0.,-1.));+#6599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6600 = ORIENTED_EDGE('',*,*,#5886,.F.);+#6601 = ADVANCED_FACE('',(#6602),#5874,.T.);+#6602 = FACE_BOUND('',#6603,.F.);+#6603 = EDGE_LOOP('',(#6604,#6625,#6626,#6627));+#6604 = ORIENTED_EDGE('',*,*,#6605,.F.);+#6605 = EDGE_CURVE('',#6220,#5831,#6606,.T.);+#6606 = SURFACE_CURVE('',#6607,(#6611,#6618),.PCURVE_S1.);+#6607 = LINE('',#6608,#6609);+#6608 = CARTESIAN_POINT('',(-5.255,-0.34,0.2));+#6609 = VECTOR('',#6610,1.);+#6610 = DIRECTION('',(0.,1.,0.));+#6611 = PCURVE('',#5874,#6612);+#6612 = DEFINITIONAL_REPRESENTATION('',(#6613),#6617);+#6613 = LINE('',#6614,#6615);+#6614 = CARTESIAN_POINT('',(-0.7,-0.34));+#6615 = VECTOR('',#6616,1.);+#6616 = DIRECTION('',(0.,-1.));+#6617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6618 = PCURVE('',#5846,#6619);+#6619 = DEFINITIONAL_REPRESENTATION('',(#6620),#6624);+#6620 = LINE('',#6621,#6622);+#6621 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#6622 = VECTOR('',#6623,1.);+#6623 = DIRECTION('',(0.,1.));+#6624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6625 = ORIENTED_EDGE('',*,*,#6242,.T.);+#6626 = ORIENTED_EDGE('',*,*,#6580,.T.);+#6627 = ORIENTED_EDGE('',*,*,#5858,.F.);+#6628 = ADVANCED_FACE('',(#6629),#5846,.T.);+#6629 = FACE_BOUND('',#6630,.F.);+#6630 = EDGE_LOOP('',(#6631,#6652,#6653,#6654));+#6631 = ORIENTED_EDGE('',*,*,#6632,.T.);+#6632 = EDGE_CURVE('',#5798,#6192,#6633,.T.);+#6633 = SURFACE_CURVE('',#6634,(#6638,#6645),.PCURVE_S1.);+#6634 = LINE('',#6635,#6636);+#6635 = CARTESIAN_POINT('',(-4.606430027578,0.18,0.2));+#6636 = VECTOR('',#6637,1.);+#6637 = DIRECTION('',(-0.,-1.,-0.));+#6638 = PCURVE('',#5846,#6639);+#6639 = DEFINITIONAL_REPRESENTATION('',(#6640),#6644);+#6640 = LINE('',#6641,#6642);+#6641 = CARTESIAN_POINT('',(0.,0.18));+#6642 = VECTOR('',#6643,1.);+#6643 = DIRECTION('',(0.,-1.));+#6644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6645 = PCURVE('',#5818,#6646);+#6646 = DEFINITIONAL_REPRESENTATION('',(#6647),#6651);+#6647 = LINE('',#6648,#6649);+#6648 = CARTESIAN_POINT('',(3.14159265359,0.18));+#6649 = VECTOR('',#6650,1.);+#6650 = DIRECTION('',(-0.,-1.));+#6651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6652 = ORIENTED_EDGE('',*,*,#6219,.T.);+#6653 = ORIENTED_EDGE('',*,*,#6605,.T.);+#6654 = ORIENTED_EDGE('',*,*,#5830,.F.);+#6655 = ADVANCED_FACE('',(#6656),#5818,.F.);+#6656 = FACE_BOUND('',#6657,.F.);+#6657 = EDGE_LOOP('',(#6658,#6659,#6660,#6681));+#6658 = ORIENTED_EDGE('',*,*,#6632,.F.);+#6659 = ORIENTED_EDGE('',*,*,#5797,.T.);+#6660 = ORIENTED_EDGE('',*,*,#6661,.T.);+#6661 = EDGE_CURVE('',#5770,#6169,#6662,.T.);+#6662 = SURFACE_CURVE('',#6663,(#6667,#6674),.PCURVE_S1.);+#6663 = LINE('',#6664,#6665);+#6664 = CARTESIAN_POINT('',(-4.537145669057,0.18,0.240004029399));+#6665 = VECTOR('',#6666,1.);+#6666 = DIRECTION('',(-0.,-1.,-0.));+#6667 = PCURVE('',#5818,#6668);+#6668 = DEFINITIONAL_REPRESENTATION('',(#6669),#6673);+#6669 = LINE('',#6670,#6671);+#6670 = CARTESIAN_POINT('',(2.094336944003,0.18));+#6671 = VECTOR('',#6672,1.);+#6672 = DIRECTION('',(-0.,-1.));+#6673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6674 = PCURVE('',#5785,#6675);+#6675 = DEFINITIONAL_REPRESENTATION('',(#6676),#6680);+#6676 = LINE('',#6677,#6678);+#6677 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#6678 = VECTOR('',#6679,1.);+#6679 = DIRECTION('',(0.,-1.));+#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6681 = ORIENTED_EDGE('',*,*,#6191,.F.);+#6682 = ADVANCED_FACE('',(#6683),#5785,.T.);+#6683 = FACE_BOUND('',#6684,.F.);+#6684 = EDGE_LOOP('',(#6685,#6686,#6687,#6688));+#6685 = ORIENTED_EDGE('',*,*,#6417,.F.);+#6686 = ORIENTED_EDGE('',*,*,#6168,.T.);+#6687 = ORIENTED_EDGE('',*,*,#6661,.F.);+#6688 = ORIENTED_EDGE('',*,*,#5769,.F.);+#6689 = MANIFOLD_SOLID_BREP('',#6690);+#6690 = CLOSED_SHELL('',(#6691,#6813,#6889,#7239,#7288,#7566,#7593,#7620+ ,#7647,#7674,#7701,#7728,#7755,#7782,#7809,#7836));+#6691 = ADVANCED_FACE('',(#6692),#6706,.T.);+#6692 = FACE_BOUND('',#6693,.T.);+#6693 = EDGE_LOOP('',(#6694,#6729,#6758,#6786));+#6694 = ORIENTED_EDGE('',*,*,#6695,.F.);+#6695 = EDGE_CURVE('',#6696,#6698,#6700,.T.);+#6696 = VERTEX_POINT('',#6697);+#6697 = CARTESIAN_POINT('',(-3.4975,-1.45,1.3));+#6698 = VERTEX_POINT('',#6699);+#6699 = CARTESIAN_POINT('',(-3.4975,-1.09,1.3));+#6700 = SURFACE_CURVE('',#6701,(#6705,#6717),.PCURVE_S1.);+#6701 = LINE('',#6702,#6703);+#6702 = CARTESIAN_POINT('',(-3.4975,-1.45,1.3));+#6703 = VECTOR('',#6704,1.);+#6704 = DIRECTION('',(0.,1.,0.));+#6705 = PCURVE('',#6706,#6711);+#6706 = CYLINDRICAL_SURFACE('',#6707,0.1);+#6707 = AXIS2_PLACEMENT_3D('',#6708,#6709,#6710);+#6708 = CARTESIAN_POINT('',(-3.4975,-1.27,1.2));+#6709 = DIRECTION('',(0.,1.,0.));+#6710 = DIRECTION('',(-1.,-0.,-0.));+#6711 = DEFINITIONAL_REPRESENTATION('',(#6712),#6716);+#6712 = LINE('',#6713,#6714);+#6713 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#6714 = VECTOR('',#6715,1.);+#6715 = DIRECTION('',(-0.,1.));+#6716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6717 = PCURVE('',#6718,#6723);+#6718 = PLANE('',#6719);+#6719 = AXIS2_PLACEMENT_3D('',#6720,#6721,#6722);+#6720 = CARTESIAN_POINT('',(-3.4975,-1.27,1.3));+#6721 = DIRECTION('',(0.,0.,1.));+#6722 = DIRECTION('',(1.,0.,0.));+#6723 = DEFINITIONAL_REPRESENTATION('',(#6724),#6728);+#6724 = LINE('',#6725,#6726);+#6725 = CARTESIAN_POINT('',(0.,-0.18));+#6726 = VECTOR('',#6727,1.);+#6727 = DIRECTION('',(0.,1.));+#6728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6729 = ORIENTED_EDGE('',*,*,#6730,.T.);+#6730 = EDGE_CURVE('',#6696,#6731,#6733,.T.);+#6731 = VERTEX_POINT('',#6732);+#6732 = CARTESIAN_POINT('',(-3.4475,-1.45,1.286602540378));+#6733 = SURFACE_CURVE('',#6734,(#6739,#6746),.PCURVE_S1.);+#6734 = CIRCLE('',#6735,0.1);+#6735 = AXIS2_PLACEMENT_3D('',#6736,#6737,#6738);+#6736 = CARTESIAN_POINT('',(-3.4975,-1.45,1.2));+#6737 = DIRECTION('',(0.,1.,-0.));+#6738 = DIRECTION('',(-1.,0.,0.));+#6739 = PCURVE('',#6706,#6740);+#6740 = DEFINITIONAL_REPRESENTATION('',(#6741),#6745);+#6741 = LINE('',#6742,#6743);+#6742 = CARTESIAN_POINT('',(0.,-0.18));+#6743 = VECTOR('',#6744,1.);+#6744 = DIRECTION('',(1.,0.));+#6745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6746 = PCURVE('',#6747,#6752);+#6747 = PLANE('',#6748);+#6748 = AXIS2_PLACEMENT_3D('',#6749,#6750,#6751);+#6749 = CARTESIAN_POINT('',(-4.408401242914,-1.45,0.524461625949));+#6750 = DIRECTION('',(0.,1.,0.));+#6751 = DIRECTION('',(0.,0.,-1.));+#6752 = DEFINITIONAL_REPRESENTATION('',(#6753),#6757);+#6753 = CIRCLE('',#6754,0.1);+#6754 = AXIS2_PLACEMENT_2D('',#6755,#6756);+#6755 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#6756 = DIRECTION('',(0.,1.));+#6757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6758 = ORIENTED_EDGE('',*,*,#6759,.T.);+#6759 = EDGE_CURVE('',#6731,#6760,#6762,.T.);+#6760 = VERTEX_POINT('',#6761);+#6761 = CARTESIAN_POINT('',(-3.4475,-1.09,1.286602540378));+#6762 = SURFACE_CURVE('',#6763,(#6767,#6774),.PCURVE_S1.);+#6763 = LINE('',#6764,#6765);+#6764 = CARTESIAN_POINT('',(-3.4475,-1.27,1.286602540378));+#6765 = VECTOR('',#6766,1.);+#6766 = DIRECTION('',(0.,1.,0.));+#6767 = PCURVE('',#6706,#6768);+#6768 = DEFINITIONAL_REPRESENTATION('',(#6769),#6773);+#6769 = LINE('',#6770,#6771);+#6770 = CARTESIAN_POINT('',(2.094395102393,0.));+#6771 = VECTOR('',#6772,1.);+#6772 = DIRECTION('',(0.,1.));+#6773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6774 = PCURVE('',#6775,#6780);+#6775 = PLANE('',#6776);+#6776 = AXIS2_PLACEMENT_3D('',#6777,#6778,#6779);+#6777 = CARTESIAN_POINT('',(-3.4475,-1.95,-0.5));+#6778 = DIRECTION('',(-1.,0.,0.));+#6779 = DIRECTION('',(0.,0.,-1.));+#6780 = DEFINITIONAL_REPRESENTATION('',(#6781),#6785);+#6781 = LINE('',#6782,#6783);+#6782 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#6783 = VECTOR('',#6784,1.);+#6784 = DIRECTION('',(0.,-1.));+#6785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6786 = ORIENTED_EDGE('',*,*,#6787,.F.);+#6787 = EDGE_CURVE('',#6698,#6760,#6788,.T.);+#6788 = SURFACE_CURVE('',#6789,(#6794,#6801),.PCURVE_S1.);+#6789 = CIRCLE('',#6790,0.1);+#6790 = AXIS2_PLACEMENT_3D('',#6791,#6792,#6793);+#6791 = CARTESIAN_POINT('',(-3.4975,-1.09,1.2));+#6792 = DIRECTION('',(0.,1.,-0.));+#6793 = DIRECTION('',(-1.,0.,0.));+#6794 = PCURVE('',#6706,#6795);+#6795 = DEFINITIONAL_REPRESENTATION('',(#6796),#6800);+#6796 = LINE('',#6797,#6798);+#6797 = CARTESIAN_POINT('',(-0.,0.18));+#6798 = VECTOR('',#6799,1.);+#6799 = DIRECTION('',(1.,-0.));+#6800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6801 = PCURVE('',#6802,#6807);+#6802 = PLANE('',#6803);+#6803 = AXIS2_PLACEMENT_3D('',#6804,#6805,#6806);+#6804 = CARTESIAN_POINT('',(-4.408401242914,-1.09,0.524461625949));+#6805 = DIRECTION('',(0.,1.,0.));+#6806 = DIRECTION('',(0.,0.,-1.));+#6807 = DEFINITIONAL_REPRESENTATION('',(#6808),#6812);+#6808 = CIRCLE('',#6809,0.1);+#6809 = AXIS2_PLACEMENT_2D('',#6810,#6811);+#6810 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#6811 = DIRECTION('',(0.,1.));+#6812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6813 = ADVANCED_FACE('',(#6814),#6718,.T.);+#6814 = FACE_BOUND('',#6815,.F.);+#6815 = EDGE_LOOP('',(#6816,#6817,#6840,#6868));+#6816 = ORIENTED_EDGE('',*,*,#6695,.F.);+#6817 = ORIENTED_EDGE('',*,*,#6818,.T.);+#6818 = EDGE_CURVE('',#6696,#6819,#6821,.T.);+#6819 = VERTEX_POINT('',#6820);+#6820 = CARTESIAN_POINT('',(-3.763569972422,-1.45,1.3));+#6821 = SURFACE_CURVE('',#6822,(#6826,#6833),.PCURVE_S1.);+#6822 = LINE('',#6823,#6824);+#6823 = CARTESIAN_POINT('',(-3.4975,-1.45,1.3));+#6824 = VECTOR('',#6825,1.);+#6825 = DIRECTION('',(-1.,-0.,-0.));+#6826 = PCURVE('',#6718,#6827);+#6827 = DEFINITIONAL_REPRESENTATION('',(#6828),#6832);+#6828 = LINE('',#6829,#6830);+#6829 = CARTESIAN_POINT('',(0.,-0.18));+#6830 = VECTOR('',#6831,1.);+#6831 = DIRECTION('',(-1.,0.));+#6832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6833 = PCURVE('',#6747,#6834);+#6834 = DEFINITIONAL_REPRESENTATION('',(#6835),#6839);+#6835 = LINE('',#6836,#6837);+#6836 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#6837 = VECTOR('',#6838,1.);+#6838 = DIRECTION('',(-0.,1.));+#6839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6840 = ORIENTED_EDGE('',*,*,#6841,.T.);+#6841 = EDGE_CURVE('',#6819,#6842,#6844,.T.);+#6842 = VERTEX_POINT('',#6843);+#6843 = CARTESIAN_POINT('',(-3.763569972422,-1.09,1.3));+#6844 = SURFACE_CURVE('',#6845,(#6849,#6856),.PCURVE_S1.);+#6845 = LINE('',#6846,#6847);+#6846 = CARTESIAN_POINT('',(-3.763569972422,-1.45,1.3));+#6847 = VECTOR('',#6848,1.);+#6848 = DIRECTION('',(0.,1.,0.));+#6849 = PCURVE('',#6718,#6850);+#6850 = DEFINITIONAL_REPRESENTATION('',(#6851),#6855);+#6851 = LINE('',#6852,#6853);+#6852 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#6853 = VECTOR('',#6854,1.);+#6854 = DIRECTION('',(0.,1.));+#6855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6856 = PCURVE('',#6857,#6862);+#6857 = CYLINDRICAL_SURFACE('',#6858,0.28);+#6858 = AXIS2_PLACEMENT_3D('',#6859,#6860,#6861);+#6859 = CARTESIAN_POINT('',(-3.763569972422,-1.27,1.02));+#6860 = DIRECTION('',(0.,1.,0.));+#6861 = DIRECTION('',(0.,0.,1.));+#6862 = DEFINITIONAL_REPRESENTATION('',(#6863),#6867);+#6863 = LINE('',#6864,#6865);+#6864 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#6865 = VECTOR('',#6866,1.);+#6866 = DIRECTION('',(0.,1.));+#6867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6868 = ORIENTED_EDGE('',*,*,#6869,.F.);+#6869 = EDGE_CURVE('',#6698,#6842,#6870,.T.);+#6870 = SURFACE_CURVE('',#6871,(#6875,#6882),.PCURVE_S1.);+#6871 = LINE('',#6872,#6873);+#6872 = CARTESIAN_POINT('',(-3.4975,-1.09,1.3));+#6873 = VECTOR('',#6874,1.);+#6874 = DIRECTION('',(-1.,-0.,-0.));+#6875 = PCURVE('',#6718,#6876);+#6876 = DEFINITIONAL_REPRESENTATION('',(#6877),#6881);+#6877 = LINE('',#6878,#6879);+#6878 = CARTESIAN_POINT('',(0.,0.18));+#6879 = VECTOR('',#6880,1.);+#6880 = DIRECTION('',(-1.,0.));+#6881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6882 = PCURVE('',#6802,#6883);+#6883 = DEFINITIONAL_REPRESENTATION('',(#6884),#6888);+#6884 = LINE('',#6885,#6886);+#6885 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#6886 = VECTOR('',#6887,1.);+#6887 = DIRECTION('',(-0.,1.));+#6888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6889 = ADVANCED_FACE('',(#6890),#6802,.T.);+#6890 = FACE_BOUND('',#6891,.F.);+#6891 = EDGE_LOOP('',(#6892,#6893,#6894,#6922,#6950,#6983,#7011,#7039,+ #7067,#7100,#7128,#7161,#7189,#7218));+#6892 = ORIENTED_EDGE('',*,*,#6787,.F.);+#6893 = ORIENTED_EDGE('',*,*,#6869,.T.);+#6894 = ORIENTED_EDGE('',*,*,#6895,.T.);+#6895 = EDGE_CURVE('',#6842,#6896,#6898,.T.);+#6896 = VERTEX_POINT('',#6897);+#6897 = CARTESIAN_POINT('',(-4.006065227246,-1.09,1.159985897103));+#6898 = SURFACE_CURVE('',#6899,(#6904,#6915),.PCURVE_S1.);+#6899 = CIRCLE('',#6900,0.28);+#6900 = AXIS2_PLACEMENT_3D('',#6901,#6902,#6903);+#6901 = CARTESIAN_POINT('',(-3.763569972422,-1.09,1.02));+#6902 = DIRECTION('',(0.,-1.,0.));+#6903 = DIRECTION('',(0.,0.,1.));+#6904 = PCURVE('',#6802,#6905);+#6905 = DEFINITIONAL_REPRESENTATION('',(#6906),#6914);+#6906 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6907,#6908,#6909,#6910,+#6911,#6912,#6913),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6907 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#6908 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#6909 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#6910 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#6911 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#6912 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#6913 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#6914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6915 = PCURVE('',#6857,#6916);+#6916 = DEFINITIONAL_REPRESENTATION('',(#6917),#6921);+#6917 = LINE('',#6918,#6919);+#6918 = CARTESIAN_POINT('',(6.28318530718,0.18));+#6919 = VECTOR('',#6920,1.);+#6920 = DIRECTION('',(-1.,-0.));+#6921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6922 = ORIENTED_EDGE('',*,*,#6923,.T.);+#6923 = EDGE_CURVE('',#6896,#6924,#6926,.T.);+#6924 = VERTEX_POINT('',#6925);+#6925 = CARTESIAN_POINT('',(-4.537145669057,-1.09,0.240004029399));+#6926 = SURFACE_CURVE('',#6927,(#6931,#6938),.PCURVE_S1.);+#6927 = LINE('',#6928,#6929);+#6928 = CARTESIAN_POINT('',(-3.954105448151,-1.09,1.249994963251));+#6929 = VECTOR('',#6930,1.);+#6930 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#6931 = PCURVE('',#6802,#6932);+#6932 = DEFINITIONAL_REPRESENTATION('',(#6933),#6937);+#6933 = LINE('',#6934,#6935);+#6934 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#6935 = VECTOR('',#6936,1.);+#6936 = DIRECTION('',(0.866054481515,0.499949632511));+#6937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6938 = PCURVE('',#6939,#6944);+#6939 = PLANE('',#6940);+#6940 = AXIS2_PLACEMENT_3D('',#6941,#6942,#6943);+#6941 = CARTESIAN_POINT('',(-4.006065227246,-1.27,1.159985897103));+#6942 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#6943 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#6944 = DEFINITIONAL_REPRESENTATION('',(#6945),#6949);+#6945 = LINE('',#6946,#6947);+#6946 = CARTESIAN_POINT('',(0.103930027578,0.18));+#6947 = VECTOR('',#6948,1.);+#6948 = DIRECTION('',(-1.,0.));+#6949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6950 = ORIENTED_EDGE('',*,*,#6951,.F.);+#6951 = EDGE_CURVE('',#6952,#6924,#6954,.T.);+#6952 = VERTEX_POINT('',#6953);+#6953 = CARTESIAN_POINT('',(-4.606430027578,-1.09,0.2));+#6954 = SURFACE_CURVE('',#6955,(#6960,#6971),.PCURVE_S1.);+#6955 = CIRCLE('',#6956,8.E-02);+#6956 = AXIS2_PLACEMENT_3D('',#6957,#6958,#6959);+#6957 = CARTESIAN_POINT('',(-4.606430027578,-1.09,0.28));+#6958 = DIRECTION('',(0.,-1.,0.));+#6959 = DIRECTION('',(0.,0.,1.));+#6960 = PCURVE('',#6802,#6961);+#6961 = DEFINITIONAL_REPRESENTATION('',(#6962),#6970);+#6962 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6963,#6964,#6965,#6966,+#6967,#6968,#6969),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6963 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#6964 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#6965 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#6966 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#6967 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#6968 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#6969 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#6970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6971 = PCURVE('',#6972,#6977);+#6972 = CYLINDRICAL_SURFACE('',#6973,8.E-02);+#6973 = AXIS2_PLACEMENT_3D('',#6974,#6975,#6976);+#6974 = CARTESIAN_POINT('',(-4.606430027578,-1.27,0.28));+#6975 = DIRECTION('',(0.,1.,0.));+#6976 = DIRECTION('',(0.,0.,1.));+#6977 = DEFINITIONAL_REPRESENTATION('',(#6978),#6982);+#6978 = LINE('',#6979,#6980);+#6979 = CARTESIAN_POINT('',(6.28318530718,0.18));+#6980 = VECTOR('',#6981,1.);+#6981 = DIRECTION('',(-1.,-0.));+#6982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6983 = ORIENTED_EDGE('',*,*,#6984,.T.);+#6984 = EDGE_CURVE('',#6952,#6985,#6987,.T.);+#6985 = VERTEX_POINT('',#6986);+#6986 = CARTESIAN_POINT('',(-5.255,-1.09,0.2));+#6987 = SURFACE_CURVE('',#6988,(#6992,#6999),.PCURVE_S1.);+#6988 = LINE('',#6989,#6990);+#6989 = CARTESIAN_POINT('',(-4.5025,-1.09,0.2));+#6990 = VECTOR('',#6991,1.);+#6991 = DIRECTION('',(-1.,-0.,-0.));+#6992 = PCURVE('',#6802,#6993);+#6993 = DEFINITIONAL_REPRESENTATION('',(#6994),#6998);+#6994 = LINE('',#6995,#6996);+#6995 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#6996 = VECTOR('',#6997,1.);+#6997 = DIRECTION('',(-0.,1.));+#6998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6999 = PCURVE('',#7000,#7005);+#7000 = PLANE('',#7001);+#7001 = AXIS2_PLACEMENT_3D('',#7002,#7003,#7004);+#7002 = CARTESIAN_POINT('',(-4.606430027578,-1.27,0.2));+#7003 = DIRECTION('',(0.,0.,1.));+#7004 = DIRECTION('',(1.,0.,0.));+#7005 = DEFINITIONAL_REPRESENTATION('',(#7006),#7010);+#7006 = LINE('',#7007,#7008);+#7007 = CARTESIAN_POINT('',(0.103930027578,0.18));+#7008 = VECTOR('',#7009,1.);+#7009 = DIRECTION('',(-1.,0.));+#7010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7011 = ORIENTED_EDGE('',*,*,#7012,.T.);+#7012 = EDGE_CURVE('',#6985,#7013,#7015,.T.);+#7013 = VERTEX_POINT('',#7014);+#7014 = CARTESIAN_POINT('',(-5.255,-1.09,0.));+#7015 = SURFACE_CURVE('',#7016,(#7020,#7027),.PCURVE_S1.);+#7016 = LINE('',#7017,#7018);+#7017 = CARTESIAN_POINT('',(-5.255,-1.09,1.223081297441E-02));+#7018 = VECTOR('',#7019,1.);+#7019 = DIRECTION('',(-0.,-0.,-1.));+#7020 = PCURVE('',#6802,#7021);+#7021 = DEFINITIONAL_REPRESENTATION('',(#7022),#7026);+#7022 = LINE('',#7023,#7024);+#7023 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#7024 = VECTOR('',#7025,1.);+#7025 = DIRECTION('',(1.,0.));+#7026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7027 = PCURVE('',#7028,#7033);+#7028 = PLANE('',#7029);+#7029 = AXIS2_PLACEMENT_3D('',#7030,#7031,#7032);+#7030 = CARTESIAN_POINT('',(-5.255,-1.95,-0.5));+#7031 = DIRECTION('',(-1.,0.,0.));+#7032 = DIRECTION('',(0.,0.,-1.));+#7033 = DEFINITIONAL_REPRESENTATION('',(#7034),#7038);+#7034 = LINE('',#7035,#7036);+#7035 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#7036 = VECTOR('',#7037,1.);+#7037 = DIRECTION('',(1.,0.));+#7038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7039 = ORIENTED_EDGE('',*,*,#7040,.F.);+#7040 = EDGE_CURVE('',#7041,#7013,#7043,.T.);+#7041 = VERTEX_POINT('',#7042);+#7042 = CARTESIAN_POINT('',(-4.606430027578,-1.09,-5.551115123126E-17));+#7043 = SURFACE_CURVE('',#7044,(#7048,#7055),.PCURVE_S1.);+#7044 = LINE('',#7045,#7046);+#7045 = CARTESIAN_POINT('',(-4.5025,-1.09,0.));+#7046 = VECTOR('',#7047,1.);+#7047 = DIRECTION('',(-1.,-0.,-0.));+#7048 = PCURVE('',#6802,#7049);+#7049 = DEFINITIONAL_REPRESENTATION('',(#7050),#7054);+#7050 = LINE('',#7051,#7052);+#7051 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#7052 = VECTOR('',#7053,1.);+#7053 = DIRECTION('',(-0.,1.));+#7054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7055 = PCURVE('',#7056,#7061);+#7056 = PLANE('',#7057);+#7057 = AXIS2_PLACEMENT_3D('',#7058,#7059,#7060);+#7058 = CARTESIAN_POINT('',(-4.606430027578,-1.27,0.));+#7059 = DIRECTION('',(0.,0.,1.));+#7060 = DIRECTION('',(1.,0.,0.));+#7061 = DEFINITIONAL_REPRESENTATION('',(#7062),#7066);+#7062 = LINE('',#7063,#7064);+#7063 = CARTESIAN_POINT('',(0.103930027578,0.18));+#7064 = VECTOR('',#7065,1.);+#7065 = DIRECTION('',(-1.,0.));+#7066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7067 = ORIENTED_EDGE('',*,*,#7068,.T.);+#7068 = EDGE_CURVE('',#7041,#7069,#7071,.T.);+#7069 = VERTEX_POINT('',#7070);+#7070 = CARTESIAN_POINT('',(-4.363934772754,-1.09,0.140014102897));+#7071 = SURFACE_CURVE('',#7072,(#7077,#7088),.PCURVE_S1.);+#7072 = CIRCLE('',#7073,0.28);+#7073 = AXIS2_PLACEMENT_3D('',#7074,#7075,#7076);+#7074 = CARTESIAN_POINT('',(-4.606430027578,-1.09,0.28));+#7075 = DIRECTION('',(0.,-1.,0.));+#7076 = DIRECTION('',(0.,0.,1.));+#7077 = PCURVE('',#6802,#7078);+#7078 = DEFINITIONAL_REPRESENTATION('',(#7079),#7087);+#7079 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7080,#7081,#7082,#7083,+#7084,#7085,#7086),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7080 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#7081 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#7082 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#7083 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#7084 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#7085 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#7086 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#7087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7088 = PCURVE('',#7089,#7094);+#7089 = CYLINDRICAL_SURFACE('',#7090,0.28);+#7090 = AXIS2_PLACEMENT_3D('',#7091,#7092,#7093);+#7091 = CARTESIAN_POINT('',(-4.606430027578,-1.27,0.28));+#7092 = DIRECTION('',(0.,1.,0.));+#7093 = DIRECTION('',(0.,0.,1.));+#7094 = DEFINITIONAL_REPRESENTATION('',(#7095),#7099);+#7095 = LINE('',#7096,#7097);+#7096 = CARTESIAN_POINT('',(6.28318530718,0.18));+#7097 = VECTOR('',#7098,1.);+#7098 = DIRECTION('',(-1.,-0.));+#7099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7100 = ORIENTED_EDGE('',*,*,#7101,.F.);+#7101 = EDGE_CURVE('',#7102,#7069,#7104,.T.);+#7102 = VERTEX_POINT('',#7103);+#7103 = CARTESIAN_POINT('',(-3.832854330943,-1.09,1.059995970601));+#7104 = SURFACE_CURVE('',#7105,(#7109,#7116),.PCURVE_S1.);+#7105 = LINE('',#7106,#7107);+#7106 = CARTESIAN_POINT('',(-3.780894551849,-1.09,1.150005036749));+#7107 = VECTOR('',#7108,1.);+#7108 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#7109 = PCURVE('',#6802,#7110);+#7110 = DEFINITIONAL_REPRESENTATION('',(#7111),#7115);+#7111 = LINE('',#7112,#7113);+#7112 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#7113 = VECTOR('',#7114,1.);+#7114 = DIRECTION('',(0.866054481515,0.499949632511));+#7115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7116 = PCURVE('',#7117,#7122);+#7117 = PLANE('',#7118);+#7118 = AXIS2_PLACEMENT_3D('',#7119,#7120,#7121);+#7119 = CARTESIAN_POINT('',(-3.832854330943,-1.27,1.059995970601));+#7120 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#7121 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#7122 = DEFINITIONAL_REPRESENTATION('',(#7123),#7127);+#7123 = LINE('',#7124,#7125);+#7124 = CARTESIAN_POINT('',(0.103930027578,0.18));+#7125 = VECTOR('',#7126,1.);+#7126 = DIRECTION('',(-1.,0.));+#7127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7128 = ORIENTED_EDGE('',*,*,#7129,.F.);+#7129 = EDGE_CURVE('',#7130,#7102,#7132,.T.);+#7130 = VERTEX_POINT('',#7131);+#7131 = CARTESIAN_POINT('',(-3.763569972422,-1.09,1.1));+#7132 = SURFACE_CURVE('',#7133,(#7138,#7149),.PCURVE_S1.);+#7133 = CIRCLE('',#7134,8.E-02);+#7134 = AXIS2_PLACEMENT_3D('',#7135,#7136,#7137);+#7135 = CARTESIAN_POINT('',(-3.763569972422,-1.09,1.02));+#7136 = DIRECTION('',(0.,-1.,0.));+#7137 = DIRECTION('',(0.,0.,1.));+#7138 = PCURVE('',#6802,#7139);+#7139 = DEFINITIONAL_REPRESENTATION('',(#7140),#7148);+#7140 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7141,#7142,#7143,#7144,+#7145,#7146,#7147),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7141 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#7142 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#7143 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#7144 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#7145 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#7146 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#7147 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#7148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7149 = PCURVE('',#7150,#7155);+#7150 = CYLINDRICAL_SURFACE('',#7151,8.E-02);+#7151 = AXIS2_PLACEMENT_3D('',#7152,#7153,#7154);+#7152 = CARTESIAN_POINT('',(-3.763569972422,-1.27,1.02));+#7153 = DIRECTION('',(0.,1.,0.));+#7154 = DIRECTION('',(0.,0.,1.));+#7155 = DEFINITIONAL_REPRESENTATION('',(#7156),#7160);+#7156 = LINE('',#7157,#7158);+#7157 = CARTESIAN_POINT('',(6.28318530718,0.18));+#7158 = VECTOR('',#7159,1.);+#7159 = DIRECTION('',(-1.,-0.));+#7160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7161 = ORIENTED_EDGE('',*,*,#7162,.F.);+#7162 = EDGE_CURVE('',#7163,#7130,#7165,.T.);+#7163 = VERTEX_POINT('',#7164);+#7164 = CARTESIAN_POINT('',(-3.4975,-1.09,1.1));+#7165 = SURFACE_CURVE('',#7166,(#7170,#7177),.PCURVE_S1.);+#7166 = LINE('',#7167,#7168);+#7167 = CARTESIAN_POINT('',(-3.4975,-1.09,1.1));+#7168 = VECTOR('',#7169,1.);+#7169 = DIRECTION('',(-1.,-0.,-0.));+#7170 = PCURVE('',#6802,#7171);+#7171 = DEFINITIONAL_REPRESENTATION('',(#7172),#7176);+#7172 = LINE('',#7173,#7174);+#7173 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#7174 = VECTOR('',#7175,1.);+#7175 = DIRECTION('',(-0.,1.));+#7176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7177 = PCURVE('',#7178,#7183);+#7178 = PLANE('',#7179);+#7179 = AXIS2_PLACEMENT_3D('',#7180,#7181,#7182);+#7180 = CARTESIAN_POINT('',(-3.4975,-1.27,1.1));+#7181 = DIRECTION('',(0.,0.,1.));+#7182 = DIRECTION('',(1.,0.,0.));+#7183 = DEFINITIONAL_REPRESENTATION('',(#7184),#7188);+#7184 = LINE('',#7185,#7186);+#7185 = CARTESIAN_POINT('',(0.,0.18));+#7186 = VECTOR('',#7187,1.);+#7187 = DIRECTION('',(-1.,0.));+#7188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7189 = ORIENTED_EDGE('',*,*,#7190,.F.);+#7190 = EDGE_CURVE('',#7191,#7163,#7193,.T.);+#7191 = VERTEX_POINT('',#7192);+#7192 = CARTESIAN_POINT('',(-3.4475,-1.09,1.113397459622));+#7193 = SURFACE_CURVE('',#7194,(#7199,#7206),.PCURVE_S1.);+#7194 = CIRCLE('',#7195,0.1);+#7195 = AXIS2_PLACEMENT_3D('',#7196,#7197,#7198);+#7196 = CARTESIAN_POINT('',(-3.4975,-1.09,1.2));+#7197 = DIRECTION('',(0.,1.,-0.));+#7198 = DIRECTION('',(-1.,0.,0.));+#7199 = PCURVE('',#6802,#7200);+#7200 = DEFINITIONAL_REPRESENTATION('',(#7201),#7205);+#7201 = CIRCLE('',#7202,0.1);+#7202 = AXIS2_PLACEMENT_2D('',#7203,#7204);+#7203 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#7204 = DIRECTION('',(0.,1.));+#7205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7206 = PCURVE('',#7207,#7212);+#7207 = CYLINDRICAL_SURFACE('',#7208,0.1);+#7208 = AXIS2_PLACEMENT_3D('',#7209,#7210,#7211);+#7209 = CARTESIAN_POINT('',(-3.4975,-1.27,1.2));+#7210 = DIRECTION('',(0.,1.,0.));+#7211 = DIRECTION('',(-1.,-0.,-0.));+#7212 = DEFINITIONAL_REPRESENTATION('',(#7213),#7217);+#7213 = LINE('',#7214,#7215);+#7214 = CARTESIAN_POINT('',(-0.,0.18));+#7215 = VECTOR('',#7216,1.);+#7216 = DIRECTION('',(1.,-0.));+#7217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7218 = ORIENTED_EDGE('',*,*,#7219,.F.);+#7219 = EDGE_CURVE('',#6760,#7191,#7220,.T.);+#7220 = SURFACE_CURVE('',#7221,(#7225,#7232),.PCURVE_S1.);+#7221 = LINE('',#7222,#7223);+#7222 = CARTESIAN_POINT('',(-3.4475,-1.09,1.223081297441E-02));+#7223 = VECTOR('',#7224,1.);+#7224 = DIRECTION('',(-0.,-0.,-1.));+#7225 = PCURVE('',#6802,#7226);+#7226 = DEFINITIONAL_REPRESENTATION('',(#7227),#7231);+#7227 = LINE('',#7228,#7229);+#7228 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#7229 = VECTOR('',#7230,1.);+#7230 = DIRECTION('',(1.,0.));+#7231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7232 = PCURVE('',#6775,#7233);+#7233 = DEFINITIONAL_REPRESENTATION('',(#7234),#7238);+#7234 = LINE('',#7235,#7236);+#7235 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#7236 = VECTOR('',#7237,1.);+#7237 = DIRECTION('',(1.,0.));+#7238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7239 = ADVANCED_FACE('',(#7240),#6775,.F.);+#7240 = FACE_BOUND('',#7241,.T.);+#7241 = EDGE_LOOP('',(#7242,#7243,#7266,#7287));+#7242 = ORIENTED_EDGE('',*,*,#6759,.F.);+#7243 = ORIENTED_EDGE('',*,*,#7244,.T.);+#7244 = EDGE_CURVE('',#6731,#7245,#7247,.T.);+#7245 = VERTEX_POINT('',#7246);+#7246 = CARTESIAN_POINT('',(-3.4475,-1.45,1.113397459622));+#7247 = SURFACE_CURVE('',#7248,(#7252,#7259),.PCURVE_S1.);+#7248 = LINE('',#7249,#7250);+#7249 = CARTESIAN_POINT('',(-3.4475,-1.45,1.223081297441E-02));+#7250 = VECTOR('',#7251,1.);+#7251 = DIRECTION('',(-0.,-0.,-1.));+#7252 = PCURVE('',#6775,#7253);+#7253 = DEFINITIONAL_REPRESENTATION('',(#7254),#7258);+#7254 = LINE('',#7255,#7256);+#7255 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#7256 = VECTOR('',#7257,1.);+#7257 = DIRECTION('',(1.,0.));+#7258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7259 = PCURVE('',#6747,#7260);+#7260 = DEFINITIONAL_REPRESENTATION('',(#7261),#7265);+#7261 = LINE('',#7262,#7263);+#7262 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#7263 = VECTOR('',#7264,1.);+#7264 = DIRECTION('',(1.,0.));+#7265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7266 = ORIENTED_EDGE('',*,*,#7267,.T.);+#7267 = EDGE_CURVE('',#7245,#7191,#7268,.T.);+#7268 = SURFACE_CURVE('',#7269,(#7273,#7280),.PCURVE_S1.);+#7269 = LINE('',#7270,#7271);+#7270 = CARTESIAN_POINT('',(-3.4475,-1.27,1.113397459622));+#7271 = VECTOR('',#7272,1.);+#7272 = DIRECTION('',(0.,1.,0.));+#7273 = PCURVE('',#6775,#7274);+#7274 = DEFINITIONAL_REPRESENTATION('',(#7275),#7279);+#7275 = LINE('',#7276,#7277);+#7276 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#7277 = VECTOR('',#7278,1.);+#7278 = DIRECTION('',(0.,-1.));+#7279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7280 = PCURVE('',#7207,#7281);+#7281 = DEFINITIONAL_REPRESENTATION('',(#7282),#7286);+#7282 = LINE('',#7283,#7284);+#7283 = CARTESIAN_POINT('',(4.188790204786,0.));+#7284 = VECTOR('',#7285,1.);+#7285 = DIRECTION('',(0.,1.));+#7286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7287 = ORIENTED_EDGE('',*,*,#7219,.F.);+#7288 = ADVANCED_FACE('',(#7289),#6747,.F.);+#7289 = FACE_BOUND('',#7290,.T.);+#7290 = EDGE_LOOP('',(#7291,#7292,#7293,#7321,#7344,#7372,#7395,#7418,+ #7441,#7469,#7492,#7520,#7543,#7565));+#7291 = ORIENTED_EDGE('',*,*,#6730,.F.);+#7292 = ORIENTED_EDGE('',*,*,#6818,.T.);+#7293 = ORIENTED_EDGE('',*,*,#7294,.T.);+#7294 = EDGE_CURVE('',#6819,#7295,#7297,.T.);+#7295 = VERTEX_POINT('',#7296);+#7296 = CARTESIAN_POINT('',(-4.006065227246,-1.45,1.159985897103));+#7297 = SURFACE_CURVE('',#7298,(#7303,#7314),.PCURVE_S1.);+#7298 = CIRCLE('',#7299,0.28);+#7299 = AXIS2_PLACEMENT_3D('',#7300,#7301,#7302);+#7300 = CARTESIAN_POINT('',(-3.763569972422,-1.45,1.02));+#7301 = DIRECTION('',(0.,-1.,0.));+#7302 = DIRECTION('',(0.,0.,1.));+#7303 = PCURVE('',#6747,#7304);+#7304 = DEFINITIONAL_REPRESENTATION('',(#7305),#7313);+#7305 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7306,#7307,#7308,#7309,+#7310,#7311,#7312),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7306 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#7307 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#7308 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#7309 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#7310 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#7311 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#7312 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#7313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7314 = PCURVE('',#6857,#7315);+#7315 = DEFINITIONAL_REPRESENTATION('',(#7316),#7320);+#7316 = LINE('',#7317,#7318);+#7317 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#7318 = VECTOR('',#7319,1.);+#7319 = DIRECTION('',(-1.,0.));+#7320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7321 = ORIENTED_EDGE('',*,*,#7322,.T.);+#7322 = EDGE_CURVE('',#7295,#7323,#7325,.T.);+#7323 = VERTEX_POINT('',#7324);+#7324 = CARTESIAN_POINT('',(-4.537145669057,-1.45,0.240004029399));+#7325 = SURFACE_CURVE('',#7326,(#7330,#7337),.PCURVE_S1.);+#7326 = LINE('',#7327,#7328);+#7327 = CARTESIAN_POINT('',(-3.954105448151,-1.45,1.249994963251));+#7328 = VECTOR('',#7329,1.);+#7329 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#7330 = PCURVE('',#6747,#7331);+#7331 = DEFINITIONAL_REPRESENTATION('',(#7332),#7336);+#7332 = LINE('',#7333,#7334);+#7333 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#7334 = VECTOR('',#7335,1.);+#7335 = DIRECTION('',(0.866054481515,0.499949632511));+#7336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7337 = PCURVE('',#6939,#7338);+#7338 = DEFINITIONAL_REPRESENTATION('',(#7339),#7343);+#7339 = LINE('',#7340,#7341);+#7340 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#7341 = VECTOR('',#7342,1.);+#7342 = DIRECTION('',(-1.,0.));+#7343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7344 = ORIENTED_EDGE('',*,*,#7345,.F.);+#7345 = EDGE_CURVE('',#7346,#7323,#7348,.T.);+#7346 = VERTEX_POINT('',#7347);+#7347 = CARTESIAN_POINT('',(-4.606430027578,-1.45,0.2));+#7348 = SURFACE_CURVE('',#7349,(#7354,#7365),.PCURVE_S1.);+#7349 = CIRCLE('',#7350,8.E-02);+#7350 = AXIS2_PLACEMENT_3D('',#7351,#7352,#7353);+#7351 = CARTESIAN_POINT('',(-4.606430027578,-1.45,0.28));+#7352 = DIRECTION('',(0.,-1.,0.));+#7353 = DIRECTION('',(0.,0.,1.));+#7354 = PCURVE('',#6747,#7355);+#7355 = DEFINITIONAL_REPRESENTATION('',(#7356),#7364);+#7356 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7357,#7358,#7359,#7360,+#7361,#7362,#7363),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7357 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#7358 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#7359 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#7360 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#7361 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#7362 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#7363 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#7364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7365 = PCURVE('',#6972,#7366);+#7366 = DEFINITIONAL_REPRESENTATION('',(#7367),#7371);+#7367 = LINE('',#7368,#7369);+#7368 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#7369 = VECTOR('',#7370,1.);+#7370 = DIRECTION('',(-1.,0.));+#7371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7372 = ORIENTED_EDGE('',*,*,#7373,.T.);+#7373 = EDGE_CURVE('',#7346,#7374,#7376,.T.);+#7374 = VERTEX_POINT('',#7375);+#7375 = CARTESIAN_POINT('',(-5.255,-1.45,0.2));+#7376 = SURFACE_CURVE('',#7377,(#7381,#7388),.PCURVE_S1.);+#7377 = LINE('',#7378,#7379);+#7378 = CARTESIAN_POINT('',(-4.5025,-1.45,0.2));+#7379 = VECTOR('',#7380,1.);+#7380 = DIRECTION('',(-1.,-0.,-0.));+#7381 = PCURVE('',#6747,#7382);+#7382 = DEFINITIONAL_REPRESENTATION('',(#7383),#7387);+#7383 = LINE('',#7384,#7385);+#7384 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#7385 = VECTOR('',#7386,1.);+#7386 = DIRECTION('',(-0.,1.));+#7387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7388 = PCURVE('',#7000,#7389);+#7389 = DEFINITIONAL_REPRESENTATION('',(#7390),#7394);+#7390 = LINE('',#7391,#7392);+#7391 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#7392 = VECTOR('',#7393,1.);+#7393 = DIRECTION('',(-1.,0.));+#7394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7395 = ORIENTED_EDGE('',*,*,#7396,.T.);+#7396 = EDGE_CURVE('',#7374,#7397,#7399,.T.);+#7397 = VERTEX_POINT('',#7398);+#7398 = CARTESIAN_POINT('',(-5.255,-1.45,0.));+#7399 = SURFACE_CURVE('',#7400,(#7404,#7411),.PCURVE_S1.);+#7400 = LINE('',#7401,#7402);+#7401 = CARTESIAN_POINT('',(-5.255,-1.45,1.223081297441E-02));+#7402 = VECTOR('',#7403,1.);+#7403 = DIRECTION('',(-0.,-0.,-1.));+#7404 = PCURVE('',#6747,#7405);+#7405 = DEFINITIONAL_REPRESENTATION('',(#7406),#7410);+#7406 = LINE('',#7407,#7408);+#7407 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#7408 = VECTOR('',#7409,1.);+#7409 = DIRECTION('',(1.,0.));+#7410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7411 = PCURVE('',#7028,#7412);+#7412 = DEFINITIONAL_REPRESENTATION('',(#7413),#7417);+#7413 = LINE('',#7414,#7415);+#7414 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#7415 = VECTOR('',#7416,1.);+#7416 = DIRECTION('',(1.,0.));+#7417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7418 = ORIENTED_EDGE('',*,*,#7419,.F.);+#7419 = EDGE_CURVE('',#7420,#7397,#7422,.T.);+#7420 = VERTEX_POINT('',#7421);+#7421 = CARTESIAN_POINT('',(-4.606430027578,-1.45,-5.551115123126E-17));+#7422 = SURFACE_CURVE('',#7423,(#7427,#7434),.PCURVE_S1.);+#7423 = LINE('',#7424,#7425);+#7424 = CARTESIAN_POINT('',(-4.5025,-1.45,0.));+#7425 = VECTOR('',#7426,1.);+#7426 = DIRECTION('',(-1.,-0.,-0.));+#7427 = PCURVE('',#6747,#7428);+#7428 = DEFINITIONAL_REPRESENTATION('',(#7429),#7433);+#7429 = LINE('',#7430,#7431);+#7430 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#7431 = VECTOR('',#7432,1.);+#7432 = DIRECTION('',(-0.,1.));+#7433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7434 = PCURVE('',#7056,#7435);+#7435 = DEFINITIONAL_REPRESENTATION('',(#7436),#7440);+#7436 = LINE('',#7437,#7438);+#7437 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#7438 = VECTOR('',#7439,1.);+#7439 = DIRECTION('',(-1.,0.));+#7440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7441 = ORIENTED_EDGE('',*,*,#7442,.T.);+#7442 = EDGE_CURVE('',#7420,#7443,#7445,.T.);+#7443 = VERTEX_POINT('',#7444);+#7444 = CARTESIAN_POINT('',(-4.363934772754,-1.45,0.140014102897));+#7445 = SURFACE_CURVE('',#7446,(#7451,#7462),.PCURVE_S1.);+#7446 = CIRCLE('',#7447,0.28);+#7447 = AXIS2_PLACEMENT_3D('',#7448,#7449,#7450);+#7448 = CARTESIAN_POINT('',(-4.606430027578,-1.45,0.28));+#7449 = DIRECTION('',(0.,-1.,0.));+#7450 = DIRECTION('',(0.,0.,1.));+#7451 = PCURVE('',#6747,#7452);+#7452 = DEFINITIONAL_REPRESENTATION('',(#7453),#7461);+#7453 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7454,#7455,#7456,#7457,+#7458,#7459,#7460),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7454 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#7455 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#7456 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#7457 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#7458 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#7459 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#7460 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#7461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7462 = PCURVE('',#7089,#7463);+#7463 = DEFINITIONAL_REPRESENTATION('',(#7464),#7468);+#7464 = LINE('',#7465,#7466);+#7465 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#7466 = VECTOR('',#7467,1.);+#7467 = DIRECTION('',(-1.,0.));+#7468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7469 = ORIENTED_EDGE('',*,*,#7470,.F.);+#7470 = EDGE_CURVE('',#7471,#7443,#7473,.T.);+#7471 = VERTEX_POINT('',#7472);+#7472 = CARTESIAN_POINT('',(-3.832854330943,-1.45,1.059995970601));+#7473 = SURFACE_CURVE('',#7474,(#7478,#7485),.PCURVE_S1.);+#7474 = LINE('',#7475,#7476);+#7475 = CARTESIAN_POINT('',(-3.780894551849,-1.45,1.150005036749));+#7476 = VECTOR('',#7477,1.);+#7477 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#7478 = PCURVE('',#6747,#7479);+#7479 = DEFINITIONAL_REPRESENTATION('',(#7480),#7484);+#7480 = LINE('',#7481,#7482);+#7481 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#7482 = VECTOR('',#7483,1.);+#7483 = DIRECTION('',(0.866054481515,0.499949632511));+#7484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7485 = PCURVE('',#7117,#7486);+#7486 = DEFINITIONAL_REPRESENTATION('',(#7487),#7491);+#7487 = LINE('',#7488,#7489);+#7488 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#7489 = VECTOR('',#7490,1.);+#7490 = DIRECTION('',(-1.,0.));+#7491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7492 = ORIENTED_EDGE('',*,*,#7493,.F.);+#7493 = EDGE_CURVE('',#7494,#7471,#7496,.T.);+#7494 = VERTEX_POINT('',#7495);+#7495 = CARTESIAN_POINT('',(-3.763569972422,-1.45,1.1));+#7496 = SURFACE_CURVE('',#7497,(#7502,#7513),.PCURVE_S1.);+#7497 = CIRCLE('',#7498,8.E-02);+#7498 = AXIS2_PLACEMENT_3D('',#7499,#7500,#7501);+#7499 = CARTESIAN_POINT('',(-3.763569972422,-1.45,1.02));+#7500 = DIRECTION('',(0.,-1.,0.));+#7501 = DIRECTION('',(0.,0.,1.));+#7502 = PCURVE('',#6747,#7503);+#7503 = DEFINITIONAL_REPRESENTATION('',(#7504),#7512);+#7504 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7505,#7506,#7507,#7508,+#7509,#7510,#7511),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7505 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#7506 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#7507 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#7508 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#7509 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#7510 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#7511 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#7512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7513 = PCURVE('',#7150,#7514);+#7514 = DEFINITIONAL_REPRESENTATION('',(#7515),#7519);+#7515 = LINE('',#7516,#7517);+#7516 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#7517 = VECTOR('',#7518,1.);+#7518 = DIRECTION('',(-1.,0.));+#7519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7520 = ORIENTED_EDGE('',*,*,#7521,.F.);+#7521 = EDGE_CURVE('',#7522,#7494,#7524,.T.);+#7522 = VERTEX_POINT('',#7523);+#7523 = CARTESIAN_POINT('',(-3.4975,-1.45,1.1));+#7524 = SURFACE_CURVE('',#7525,(#7529,#7536),.PCURVE_S1.);+#7525 = LINE('',#7526,#7527);+#7526 = CARTESIAN_POINT('',(-3.4975,-1.45,1.1));+#7527 = VECTOR('',#7528,1.);+#7528 = DIRECTION('',(-1.,-0.,-0.));+#7529 = PCURVE('',#6747,#7530);+#7530 = DEFINITIONAL_REPRESENTATION('',(#7531),#7535);+#7531 = LINE('',#7532,#7533);+#7532 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#7533 = VECTOR('',#7534,1.);+#7534 = DIRECTION('',(-0.,1.));+#7535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7536 = PCURVE('',#7178,#7537);+#7537 = DEFINITIONAL_REPRESENTATION('',(#7538),#7542);+#7538 = LINE('',#7539,#7540);+#7539 = CARTESIAN_POINT('',(0.,-0.18));+#7540 = VECTOR('',#7541,1.);+#7541 = DIRECTION('',(-1.,0.));+#7542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7543 = ORIENTED_EDGE('',*,*,#7544,.F.);+#7544 = EDGE_CURVE('',#7245,#7522,#7545,.T.);+#7545 = SURFACE_CURVE('',#7546,(#7551,#7558),.PCURVE_S1.);+#7546 = CIRCLE('',#7547,0.1);+#7547 = AXIS2_PLACEMENT_3D('',#7548,#7549,#7550);+#7548 = CARTESIAN_POINT('',(-3.4975,-1.45,1.2));+#7549 = DIRECTION('',(0.,1.,-0.));+#7550 = DIRECTION('',(-1.,0.,0.));+#7551 = PCURVE('',#6747,#7552);+#7552 = DEFINITIONAL_REPRESENTATION('',(#7553),#7557);+#7553 = CIRCLE('',#7554,0.1);+#7554 = AXIS2_PLACEMENT_2D('',#7555,#7556);+#7555 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#7556 = DIRECTION('',(0.,1.));+#7557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7558 = PCURVE('',#7207,#7559);+#7559 = DEFINITIONAL_REPRESENTATION('',(#7560),#7564);+#7560 = LINE('',#7561,#7562);+#7561 = CARTESIAN_POINT('',(0.,-0.18));+#7562 = VECTOR('',#7563,1.);+#7563 = DIRECTION('',(1.,0.));+#7564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7565 = ORIENTED_EDGE('',*,*,#7244,.F.);+#7566 = ADVANCED_FACE('',(#7567),#6857,.T.);+#7567 = FACE_BOUND('',#7568,.T.);+#7568 = EDGE_LOOP('',(#7569,#7570,#7591,#7592));+#7569 = ORIENTED_EDGE('',*,*,#6895,.T.);+#7570 = ORIENTED_EDGE('',*,*,#7571,.F.);+#7571 = EDGE_CURVE('',#7295,#6896,#7572,.T.);+#7572 = SURFACE_CURVE('',#7573,(#7577,#7584),.PCURVE_S1.);+#7573 = LINE('',#7574,#7575);+#7574 = CARTESIAN_POINT('',(-4.006065227246,-1.45,1.159985897103));+#7575 = VECTOR('',#7576,1.);+#7576 = DIRECTION('',(0.,1.,0.));+#7577 = PCURVE('',#6857,#7578);+#7578 = DEFINITIONAL_REPRESENTATION('',(#7579),#7583);+#7579 = LINE('',#7580,#7581);+#7580 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#7581 = VECTOR('',#7582,1.);+#7582 = DIRECTION('',(0.,1.));+#7583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7584 = PCURVE('',#6939,#7585);+#7585 = DEFINITIONAL_REPRESENTATION('',(#7586),#7590);+#7586 = LINE('',#7587,#7588);+#7587 = CARTESIAN_POINT('',(0.,-0.18));+#7588 = VECTOR('',#7589,1.);+#7589 = DIRECTION('',(0.,1.));+#7590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7591 = ORIENTED_EDGE('',*,*,#7294,.F.);+#7592 = ORIENTED_EDGE('',*,*,#6841,.T.);+#7593 = ADVANCED_FACE('',(#7594),#7207,.T.);+#7594 = FACE_BOUND('',#7595,.T.);+#7595 = EDGE_LOOP('',(#7596,#7597,#7598,#7619));+#7596 = ORIENTED_EDGE('',*,*,#7267,.F.);+#7597 = ORIENTED_EDGE('',*,*,#7544,.T.);+#7598 = ORIENTED_EDGE('',*,*,#7599,.F.);+#7599 = EDGE_CURVE('',#7163,#7522,#7600,.T.);+#7600 = SURFACE_CURVE('',#7601,(#7605,#7612),.PCURVE_S1.);+#7601 = LINE('',#7602,#7603);+#7602 = CARTESIAN_POINT('',(-3.4975,-1.09,1.1));+#7603 = VECTOR('',#7604,1.);+#7604 = DIRECTION('',(-0.,-1.,-0.));+#7605 = PCURVE('',#7207,#7606);+#7606 = DEFINITIONAL_REPRESENTATION('',(#7607),#7611);+#7607 = LINE('',#7608,#7609);+#7608 = CARTESIAN_POINT('',(4.712388980385,0.18));+#7609 = VECTOR('',#7610,1.);+#7610 = DIRECTION('',(0.,-1.));+#7611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7612 = PCURVE('',#7178,#7613);+#7613 = DEFINITIONAL_REPRESENTATION('',(#7614),#7618);+#7614 = LINE('',#7615,#7616);+#7615 = CARTESIAN_POINT('',(0.,0.18));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(0.,-1.));+#7618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7619 = ORIENTED_EDGE('',*,*,#7190,.F.);+#7620 = ADVANCED_FACE('',(#7621),#7178,.F.);+#7621 = FACE_BOUND('',#7622,.T.);+#7622 = EDGE_LOOP('',(#7623,#7624,#7645,#7646));+#7623 = ORIENTED_EDGE('',*,*,#7521,.T.);+#7624 = ORIENTED_EDGE('',*,*,#7625,.F.);+#7625 = EDGE_CURVE('',#7130,#7494,#7626,.T.);+#7626 = SURFACE_CURVE('',#7627,(#7631,#7638),.PCURVE_S1.);+#7627 = LINE('',#7628,#7629);+#7628 = CARTESIAN_POINT('',(-3.763569972422,-1.09,1.1));+#7629 = VECTOR('',#7630,1.);+#7630 = DIRECTION('',(-0.,-1.,-0.));+#7631 = PCURVE('',#7178,#7632);+#7632 = DEFINITIONAL_REPRESENTATION('',(#7633),#7637);+#7633 = LINE('',#7634,#7635);+#7634 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#7635 = VECTOR('',#7636,1.);+#7636 = DIRECTION('',(0.,-1.));+#7637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7638 = PCURVE('',#7150,#7639);+#7639 = DEFINITIONAL_REPRESENTATION('',(#7640),#7644);+#7640 = LINE('',#7641,#7642);+#7641 = CARTESIAN_POINT('',(6.28318530718,0.18));+#7642 = VECTOR('',#7643,1.);+#7643 = DIRECTION('',(-0.,-1.));+#7644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7645 = ORIENTED_EDGE('',*,*,#7162,.F.);+#7646 = ORIENTED_EDGE('',*,*,#7599,.T.);+#7647 = ADVANCED_FACE('',(#7648),#7150,.F.);+#7648 = FACE_BOUND('',#7649,.F.);+#7649 = EDGE_LOOP('',(#7650,#7651,#7652,#7673));+#7650 = ORIENTED_EDGE('',*,*,#7625,.F.);+#7651 = ORIENTED_EDGE('',*,*,#7129,.T.);+#7652 = ORIENTED_EDGE('',*,*,#7653,.T.);+#7653 = EDGE_CURVE('',#7102,#7471,#7654,.T.);+#7654 = SURFACE_CURVE('',#7655,(#7659,#7666),.PCURVE_S1.);+#7655 = LINE('',#7656,#7657);+#7656 = CARTESIAN_POINT('',(-3.832854330943,-1.09,1.059995970601));+#7657 = VECTOR('',#7658,1.);+#7658 = DIRECTION('',(-0.,-1.,-0.));+#7659 = PCURVE('',#7150,#7660);+#7660 = DEFINITIONAL_REPRESENTATION('',(#7661),#7665);+#7661 = LINE('',#7662,#7663);+#7662 = CARTESIAN_POINT('',(5.235929597593,0.18));+#7663 = VECTOR('',#7664,1.);+#7664 = DIRECTION('',(-0.,-1.));+#7665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7666 = PCURVE('',#7117,#7667);+#7667 = DEFINITIONAL_REPRESENTATION('',(#7668),#7672);+#7668 = LINE('',#7669,#7670);+#7669 = CARTESIAN_POINT('',(0.,0.18));+#7670 = VECTOR('',#7671,1.);+#7671 = DIRECTION('',(0.,-1.));+#7672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7673 = ORIENTED_EDGE('',*,*,#7493,.F.);+#7674 = ADVANCED_FACE('',(#7675),#7117,.F.);+#7675 = FACE_BOUND('',#7676,.T.);+#7676 = EDGE_LOOP('',(#7677,#7678,#7699,#7700));+#7677 = ORIENTED_EDGE('',*,*,#7470,.T.);+#7678 = ORIENTED_EDGE('',*,*,#7679,.F.);+#7679 = EDGE_CURVE('',#7069,#7443,#7680,.T.);+#7680 = SURFACE_CURVE('',#7681,(#7685,#7692),.PCURVE_S1.);+#7681 = LINE('',#7682,#7683);+#7682 = CARTESIAN_POINT('',(-4.363934772754,-1.09,0.140014102897));+#7683 = VECTOR('',#7684,1.);+#7684 = DIRECTION('',(-0.,-1.,-0.));+#7685 = PCURVE('',#7117,#7686);+#7686 = DEFINITIONAL_REPRESENTATION('',(#7687),#7691);+#7687 = LINE('',#7688,#7689);+#7688 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#7689 = VECTOR('',#7690,1.);+#7690 = DIRECTION('',(0.,-1.));+#7691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7692 = PCURVE('',#7089,#7693);+#7693 = DEFINITIONAL_REPRESENTATION('',(#7694),#7698);+#7694 = LINE('',#7695,#7696);+#7695 = CARTESIAN_POINT('',(2.094336944003,0.18));+#7696 = VECTOR('',#7697,1.);+#7697 = DIRECTION('',(-0.,-1.));+#7698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7699 = ORIENTED_EDGE('',*,*,#7101,.F.);+#7700 = ORIENTED_EDGE('',*,*,#7653,.T.);+#7701 = ADVANCED_FACE('',(#7702),#7089,.T.);+#7702 = FACE_BOUND('',#7703,.T.);+#7703 = EDGE_LOOP('',(#7704,#7725,#7726,#7727));+#7704 = ORIENTED_EDGE('',*,*,#7705,.F.);+#7705 = EDGE_CURVE('',#7041,#7420,#7706,.T.);+#7706 = SURFACE_CURVE('',#7707,(#7711,#7718),.PCURVE_S1.);+#7707 = LINE('',#7708,#7709);+#7708 = CARTESIAN_POINT('',(-4.606430027578,-1.09,-5.551115123126E-17));+#7709 = VECTOR('',#7710,1.);+#7710 = DIRECTION('',(-0.,-1.,-0.));+#7711 = PCURVE('',#7089,#7712);+#7712 = DEFINITIONAL_REPRESENTATION('',(#7713),#7717);+#7713 = LINE('',#7714,#7715);+#7714 = CARTESIAN_POINT('',(3.14159265359,0.18));+#7715 = VECTOR('',#7716,1.);+#7716 = DIRECTION('',(-0.,-1.));+#7717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7718 = PCURVE('',#7056,#7719);+#7719 = DEFINITIONAL_REPRESENTATION('',(#7720),#7724);+#7720 = LINE('',#7721,#7722);+#7721 = CARTESIAN_POINT('',(0.,0.18));+#7722 = VECTOR('',#7723,1.);+#7723 = DIRECTION('',(0.,-1.));+#7724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7725 = ORIENTED_EDGE('',*,*,#7068,.T.);+#7726 = ORIENTED_EDGE('',*,*,#7679,.T.);+#7727 = ORIENTED_EDGE('',*,*,#7442,.F.);+#7728 = ADVANCED_FACE('',(#7729),#7056,.F.);+#7729 = FACE_BOUND('',#7730,.T.);+#7730 = EDGE_LOOP('',(#7731,#7732,#7733,#7754));+#7731 = ORIENTED_EDGE('',*,*,#7705,.T.);+#7732 = ORIENTED_EDGE('',*,*,#7419,.T.);+#7733 = ORIENTED_EDGE('',*,*,#7734,.T.);+#7734 = EDGE_CURVE('',#7397,#7013,#7735,.T.);+#7735 = SURFACE_CURVE('',#7736,(#7740,#7747),.PCURVE_S1.);+#7736 = LINE('',#7737,#7738);+#7737 = CARTESIAN_POINT('',(-5.255,-1.61,0.));+#7738 = VECTOR('',#7739,1.);+#7739 = DIRECTION('',(0.,1.,0.));+#7740 = PCURVE('',#7056,#7741);+#7741 = DEFINITIONAL_REPRESENTATION('',(#7742),#7746);+#7742 = LINE('',#7743,#7744);+#7743 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#7744 = VECTOR('',#7745,1.);+#7745 = DIRECTION('',(0.,1.));+#7746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7747 = PCURVE('',#7028,#7748);+#7748 = DEFINITIONAL_REPRESENTATION('',(#7749),#7753);+#7749 = LINE('',#7750,#7751);+#7750 = CARTESIAN_POINT('',(-0.5,-0.34));+#7751 = VECTOR('',#7752,1.);+#7752 = DIRECTION('',(0.,-1.));+#7753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7754 = ORIENTED_EDGE('',*,*,#7040,.F.);+#7755 = ADVANCED_FACE('',(#7756),#7028,.T.);+#7756 = FACE_BOUND('',#7757,.F.);+#7757 = EDGE_LOOP('',(#7758,#7779,#7780,#7781));+#7758 = ORIENTED_EDGE('',*,*,#7759,.F.);+#7759 = EDGE_CURVE('',#7374,#6985,#7760,.T.);+#7760 = SURFACE_CURVE('',#7761,(#7765,#7772),.PCURVE_S1.);+#7761 = LINE('',#7762,#7763);+#7762 = CARTESIAN_POINT('',(-5.255,-1.61,0.2));+#7763 = VECTOR('',#7764,1.);+#7764 = DIRECTION('',(0.,1.,0.));+#7765 = PCURVE('',#7028,#7766);+#7766 = DEFINITIONAL_REPRESENTATION('',(#7767),#7771);+#7767 = LINE('',#7768,#7769);+#7768 = CARTESIAN_POINT('',(-0.7,-0.34));+#7769 = VECTOR('',#7770,1.);+#7770 = DIRECTION('',(0.,-1.));+#7771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7772 = PCURVE('',#7000,#7773);+#7773 = DEFINITIONAL_REPRESENTATION('',(#7774),#7778);+#7774 = LINE('',#7775,#7776);+#7775 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#7776 = VECTOR('',#7777,1.);+#7777 = DIRECTION('',(0.,1.));+#7778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7779 = ORIENTED_EDGE('',*,*,#7396,.T.);+#7780 = ORIENTED_EDGE('',*,*,#7734,.T.);+#7781 = ORIENTED_EDGE('',*,*,#7012,.F.);+#7782 = ADVANCED_FACE('',(#7783),#7000,.T.);+#7783 = FACE_BOUND('',#7784,.F.);+#7784 = EDGE_LOOP('',(#7785,#7806,#7807,#7808));+#7785 = ORIENTED_EDGE('',*,*,#7786,.T.);+#7786 = EDGE_CURVE('',#6952,#7346,#7787,.T.);+#7787 = SURFACE_CURVE('',#7788,(#7792,#7799),.PCURVE_S1.);+#7788 = LINE('',#7789,#7790);+#7789 = CARTESIAN_POINT('',(-4.606430027578,-1.09,0.2));+#7790 = VECTOR('',#7791,1.);+#7791 = DIRECTION('',(-0.,-1.,-0.));+#7792 = PCURVE('',#7000,#7793);+#7793 = DEFINITIONAL_REPRESENTATION('',(#7794),#7798);+#7794 = LINE('',#7795,#7796);+#7795 = CARTESIAN_POINT('',(0.,0.18));+#7796 = VECTOR('',#7797,1.);+#7797 = DIRECTION('',(0.,-1.));+#7798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7799 = PCURVE('',#6972,#7800);+#7800 = DEFINITIONAL_REPRESENTATION('',(#7801),#7805);+#7801 = LINE('',#7802,#7803);+#7802 = CARTESIAN_POINT('',(3.14159265359,0.18));+#7803 = VECTOR('',#7804,1.);+#7804 = DIRECTION('',(-0.,-1.));+#7805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7806 = ORIENTED_EDGE('',*,*,#7373,.T.);+#7807 = ORIENTED_EDGE('',*,*,#7759,.T.);+#7808 = ORIENTED_EDGE('',*,*,#6984,.F.);+#7809 = ADVANCED_FACE('',(#7810),#6972,.F.);+#7810 = FACE_BOUND('',#7811,.F.);+#7811 = EDGE_LOOP('',(#7812,#7813,#7814,#7835));+#7812 = ORIENTED_EDGE('',*,*,#7786,.F.);+#7813 = ORIENTED_EDGE('',*,*,#6951,.T.);+#7814 = ORIENTED_EDGE('',*,*,#7815,.T.);+#7815 = EDGE_CURVE('',#6924,#7323,#7816,.T.);+#7816 = SURFACE_CURVE('',#7817,(#7821,#7828),.PCURVE_S1.);+#7817 = LINE('',#7818,#7819);+#7818 = CARTESIAN_POINT('',(-4.537145669057,-1.09,0.240004029399));+#7819 = VECTOR('',#7820,1.);+#7820 = DIRECTION('',(-0.,-1.,-0.));+#7821 = PCURVE('',#6972,#7822);+#7822 = DEFINITIONAL_REPRESENTATION('',(#7823),#7827);+#7823 = LINE('',#7824,#7825);+#7824 = CARTESIAN_POINT('',(2.094336944003,0.18));+#7825 = VECTOR('',#7826,1.);+#7826 = DIRECTION('',(-0.,-1.));+#7827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7828 = PCURVE('',#6939,#7829);+#7829 = DEFINITIONAL_REPRESENTATION('',(#7830),#7834);+#7830 = LINE('',#7831,#7832);+#7831 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#7832 = VECTOR('',#7833,1.);+#7833 = DIRECTION('',(0.,-1.));+#7834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7835 = ORIENTED_EDGE('',*,*,#7345,.F.);+#7836 = ADVANCED_FACE('',(#7837),#6939,.T.);+#7837 = FACE_BOUND('',#7838,.F.);+#7838 = EDGE_LOOP('',(#7839,#7840,#7841,#7842));+#7839 = ORIENTED_EDGE('',*,*,#7571,.F.);+#7840 = ORIENTED_EDGE('',*,*,#7322,.T.);+#7841 = ORIENTED_EDGE('',*,*,#7815,.F.);+#7842 = ORIENTED_EDGE('',*,*,#6923,.F.);+#7843 = MANIFOLD_SOLID_BREP('',#7844);+#7844 = CLOSED_SHELL('',(#7845,#7967,#8043,#8393,#8442,#8720,#8747,#8774+ ,#8801,#8828,#8855,#8882,#8909,#8936,#8963,#8990));+#7845 = ADVANCED_FACE('',(#7846),#7860,.T.);+#7846 = FACE_BOUND('',#7847,.T.);+#7847 = EDGE_LOOP('',(#7848,#7883,#7912,#7940));+#7848 = ORIENTED_EDGE('',*,*,#7849,.F.);+#7849 = EDGE_CURVE('',#7850,#7852,#7854,.T.);+#7850 = VERTEX_POINT('',#7851);+#7851 = CARTESIAN_POINT('',(-3.4975,-2.72,1.3));+#7852 = VERTEX_POINT('',#7853);+#7853 = CARTESIAN_POINT('',(-3.4975,-2.36,1.3));+#7854 = SURFACE_CURVE('',#7855,(#7859,#7871),.PCURVE_S1.);+#7855 = LINE('',#7856,#7857);+#7856 = CARTESIAN_POINT('',(-3.4975,-2.72,1.3));+#7857 = VECTOR('',#7858,1.);+#7858 = DIRECTION('',(0.,1.,0.));+#7859 = PCURVE('',#7860,#7865);+#7860 = CYLINDRICAL_SURFACE('',#7861,0.1);+#7861 = AXIS2_PLACEMENT_3D('',#7862,#7863,#7864);+#7862 = CARTESIAN_POINT('',(-3.4975,-2.54,1.2));+#7863 = DIRECTION('',(0.,1.,0.));+#7864 = DIRECTION('',(-1.,-0.,-0.));+#7865 = DEFINITIONAL_REPRESENTATION('',(#7866),#7870);+#7866 = LINE('',#7867,#7868);+#7867 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#7868 = VECTOR('',#7869,1.);+#7869 = DIRECTION('',(-0.,1.));+#7870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7871 = PCURVE('',#7872,#7877);+#7872 = PLANE('',#7873);+#7873 = AXIS2_PLACEMENT_3D('',#7874,#7875,#7876);+#7874 = CARTESIAN_POINT('',(-3.4975,-2.54,1.3));+#7875 = DIRECTION('',(0.,0.,1.));+#7876 = DIRECTION('',(1.,0.,0.));+#7877 = DEFINITIONAL_REPRESENTATION('',(#7878),#7882);+#7878 = LINE('',#7879,#7880);+#7879 = CARTESIAN_POINT('',(0.,-0.18));+#7880 = VECTOR('',#7881,1.);+#7881 = DIRECTION('',(0.,1.));+#7882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7883 = ORIENTED_EDGE('',*,*,#7884,.T.);+#7884 = EDGE_CURVE('',#7850,#7885,#7887,.T.);+#7885 = VERTEX_POINT('',#7886);+#7886 = CARTESIAN_POINT('',(-3.4475,-2.72,1.286602540378));+#7887 = SURFACE_CURVE('',#7888,(#7893,#7900),.PCURVE_S1.);+#7888 = CIRCLE('',#7889,0.1);+#7889 = AXIS2_PLACEMENT_3D('',#7890,#7891,#7892);+#7890 = CARTESIAN_POINT('',(-3.4975,-2.72,1.2));+#7891 = DIRECTION('',(0.,1.,-0.));+#7892 = DIRECTION('',(-1.,0.,0.));+#7893 = PCURVE('',#7860,#7894);+#7894 = DEFINITIONAL_REPRESENTATION('',(#7895),#7899);+#7895 = LINE('',#7896,#7897);+#7896 = CARTESIAN_POINT('',(0.,-0.18));+#7897 = VECTOR('',#7898,1.);+#7898 = DIRECTION('',(1.,0.));+#7899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7900 = PCURVE('',#7901,#7906);+#7901 = PLANE('',#7902);+#7902 = AXIS2_PLACEMENT_3D('',#7903,#7904,#7905);+#7903 = CARTESIAN_POINT('',(-4.408401242914,-2.72,0.524461625949));+#7904 = DIRECTION('',(0.,1.,0.));+#7905 = DIRECTION('',(0.,0.,-1.));+#7906 = DEFINITIONAL_REPRESENTATION('',(#7907),#7911);+#7907 = CIRCLE('',#7908,0.1);+#7908 = AXIS2_PLACEMENT_2D('',#7909,#7910);+#7909 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#7910 = DIRECTION('',(0.,1.));+#7911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7912 = ORIENTED_EDGE('',*,*,#7913,.T.);+#7913 = EDGE_CURVE('',#7885,#7914,#7916,.T.);+#7914 = VERTEX_POINT('',#7915);+#7915 = CARTESIAN_POINT('',(-3.4475,-2.36,1.286602540378));+#7916 = SURFACE_CURVE('',#7917,(#7921,#7928),.PCURVE_S1.);+#7917 = LINE('',#7918,#7919);+#7918 = CARTESIAN_POINT('',(-3.4475,-2.54,1.286602540378));+#7919 = VECTOR('',#7920,1.);+#7920 = DIRECTION('',(0.,1.,0.));+#7921 = PCURVE('',#7860,#7922);+#7922 = DEFINITIONAL_REPRESENTATION('',(#7923),#7927);+#7923 = LINE('',#7924,#7925);+#7924 = CARTESIAN_POINT('',(2.094395102393,0.));+#7925 = VECTOR('',#7926,1.);+#7926 = DIRECTION('',(0.,1.));+#7927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7928 = PCURVE('',#7929,#7934);+#7929 = PLANE('',#7930);+#7930 = AXIS2_PLACEMENT_3D('',#7931,#7932,#7933);+#7931 = CARTESIAN_POINT('',(-3.4475,-3.22,-0.5));+#7932 = DIRECTION('',(-1.,0.,0.));+#7933 = DIRECTION('',(0.,0.,-1.));+#7934 = DEFINITIONAL_REPRESENTATION('',(#7935),#7939);+#7935 = LINE('',#7936,#7937);+#7936 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#7937 = VECTOR('',#7938,1.);+#7938 = DIRECTION('',(0.,-1.));+#7939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7940 = ORIENTED_EDGE('',*,*,#7941,.F.);+#7941 = EDGE_CURVE('',#7852,#7914,#7942,.T.);+#7942 = SURFACE_CURVE('',#7943,(#7948,#7955),.PCURVE_S1.);+#7943 = CIRCLE('',#7944,0.1);+#7944 = AXIS2_PLACEMENT_3D('',#7945,#7946,#7947);+#7945 = CARTESIAN_POINT('',(-3.4975,-2.36,1.2));+#7946 = DIRECTION('',(0.,1.,-0.));+#7947 = DIRECTION('',(-1.,0.,0.));+#7948 = PCURVE('',#7860,#7949);+#7949 = DEFINITIONAL_REPRESENTATION('',(#7950),#7954);+#7950 = LINE('',#7951,#7952);+#7951 = CARTESIAN_POINT('',(-0.,0.18));+#7952 = VECTOR('',#7953,1.);+#7953 = DIRECTION('',(1.,-0.));+#7954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7955 = PCURVE('',#7956,#7961);+#7956 = PLANE('',#7957);+#7957 = AXIS2_PLACEMENT_3D('',#7958,#7959,#7960);+#7958 = CARTESIAN_POINT('',(-4.408401242914,-2.36,0.524461625949));+#7959 = DIRECTION('',(0.,1.,0.));+#7960 = DIRECTION('',(0.,0.,-1.));+#7961 = DEFINITIONAL_REPRESENTATION('',(#7962),#7966);+#7962 = CIRCLE('',#7963,0.1);+#7963 = AXIS2_PLACEMENT_2D('',#7964,#7965);+#7964 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#7965 = DIRECTION('',(0.,1.));+#7966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7967 = ADVANCED_FACE('',(#7968),#7872,.T.);+#7968 = FACE_BOUND('',#7969,.F.);+#7969 = EDGE_LOOP('',(#7970,#7971,#7994,#8022));+#7970 = ORIENTED_EDGE('',*,*,#7849,.F.);+#7971 = ORIENTED_EDGE('',*,*,#7972,.T.);+#7972 = EDGE_CURVE('',#7850,#7973,#7975,.T.);+#7973 = VERTEX_POINT('',#7974);+#7974 = CARTESIAN_POINT('',(-3.763569972422,-2.72,1.3));+#7975 = SURFACE_CURVE('',#7976,(#7980,#7987),.PCURVE_S1.);+#7976 = LINE('',#7977,#7978);+#7977 = CARTESIAN_POINT('',(-3.4975,-2.72,1.3));+#7978 = VECTOR('',#7979,1.);+#7979 = DIRECTION('',(-1.,-0.,-0.));+#7980 = PCURVE('',#7872,#7981);+#7981 = DEFINITIONAL_REPRESENTATION('',(#7982),#7986);+#7982 = LINE('',#7983,#7984);+#7983 = CARTESIAN_POINT('',(0.,-0.18));+#7984 = VECTOR('',#7985,1.);+#7985 = DIRECTION('',(-1.,0.));+#7986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7987 = PCURVE('',#7901,#7988);+#7988 = DEFINITIONAL_REPRESENTATION('',(#7989),#7993);+#7989 = LINE('',#7990,#7991);+#7990 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#7991 = VECTOR('',#7992,1.);+#7992 = DIRECTION('',(-0.,1.));+#7993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7994 = ORIENTED_EDGE('',*,*,#7995,.T.);+#7995 = EDGE_CURVE('',#7973,#7996,#7998,.T.);+#7996 = VERTEX_POINT('',#7997);+#7997 = CARTESIAN_POINT('',(-3.763569972422,-2.36,1.3));+#7998 = SURFACE_CURVE('',#7999,(#8003,#8010),.PCURVE_S1.);+#7999 = LINE('',#8000,#8001);+#8000 = CARTESIAN_POINT('',(-3.763569972422,-2.72,1.3));+#8001 = VECTOR('',#8002,1.);+#8002 = DIRECTION('',(0.,1.,0.));+#8003 = PCURVE('',#7872,#8004);+#8004 = DEFINITIONAL_REPRESENTATION('',(#8005),#8009);+#8005 = LINE('',#8006,#8007);+#8006 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#8007 = VECTOR('',#8008,1.);+#8008 = DIRECTION('',(0.,1.));+#8009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8010 = PCURVE('',#8011,#8016);+#8011 = CYLINDRICAL_SURFACE('',#8012,0.28);+#8012 = AXIS2_PLACEMENT_3D('',#8013,#8014,#8015);+#8013 = CARTESIAN_POINT('',(-3.763569972422,-2.54,1.02));+#8014 = DIRECTION('',(0.,1.,0.));+#8015 = DIRECTION('',(0.,0.,1.));+#8016 = DEFINITIONAL_REPRESENTATION('',(#8017),#8021);+#8017 = LINE('',#8018,#8019);+#8018 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#8019 = VECTOR('',#8020,1.);+#8020 = DIRECTION('',(0.,1.));+#8021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8022 = ORIENTED_EDGE('',*,*,#8023,.F.);+#8023 = EDGE_CURVE('',#7852,#7996,#8024,.T.);+#8024 = SURFACE_CURVE('',#8025,(#8029,#8036),.PCURVE_S1.);+#8025 = LINE('',#8026,#8027);+#8026 = CARTESIAN_POINT('',(-3.4975,-2.36,1.3));+#8027 = VECTOR('',#8028,1.);+#8028 = DIRECTION('',(-1.,-0.,-0.));+#8029 = PCURVE('',#7872,#8030);+#8030 = DEFINITIONAL_REPRESENTATION('',(#8031),#8035);+#8031 = LINE('',#8032,#8033);+#8032 = CARTESIAN_POINT('',(0.,0.18));+#8033 = VECTOR('',#8034,1.);+#8034 = DIRECTION('',(-1.,0.));+#8035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8036 = PCURVE('',#7956,#8037);+#8037 = DEFINITIONAL_REPRESENTATION('',(#8038),#8042);+#8038 = LINE('',#8039,#8040);+#8039 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#8040 = VECTOR('',#8041,1.);+#8041 = DIRECTION('',(-0.,1.));+#8042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8043 = ADVANCED_FACE('',(#8044),#7956,.T.);+#8044 = FACE_BOUND('',#8045,.F.);+#8045 = EDGE_LOOP('',(#8046,#8047,#8048,#8076,#8104,#8137,#8165,#8193,+ #8221,#8254,#8282,#8315,#8343,#8372));+#8046 = ORIENTED_EDGE('',*,*,#7941,.F.);+#8047 = ORIENTED_EDGE('',*,*,#8023,.T.);+#8048 = ORIENTED_EDGE('',*,*,#8049,.T.);+#8049 = EDGE_CURVE('',#7996,#8050,#8052,.T.);+#8050 = VERTEX_POINT('',#8051);+#8051 = CARTESIAN_POINT('',(-4.006065227246,-2.36,1.159985897103));+#8052 = SURFACE_CURVE('',#8053,(#8058,#8069),.PCURVE_S1.);+#8053 = CIRCLE('',#8054,0.28);+#8054 = AXIS2_PLACEMENT_3D('',#8055,#8056,#8057);+#8055 = CARTESIAN_POINT('',(-3.763569972422,-2.36,1.02));+#8056 = DIRECTION('',(0.,-1.,0.));+#8057 = DIRECTION('',(0.,0.,1.));+#8058 = PCURVE('',#7956,#8059);+#8059 = DEFINITIONAL_REPRESENTATION('',(#8060),#8068);+#8060 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8061,#8062,#8063,#8064,+#8065,#8066,#8067),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8061 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#8062 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#8063 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#8064 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#8065 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#8066 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#8067 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#8068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8069 = PCURVE('',#8011,#8070);+#8070 = DEFINITIONAL_REPRESENTATION('',(#8071),#8075);+#8071 = LINE('',#8072,#8073);+#8072 = CARTESIAN_POINT('',(6.28318530718,0.18));+#8073 = VECTOR('',#8074,1.);+#8074 = DIRECTION('',(-1.,-0.));+#8075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8076 = ORIENTED_EDGE('',*,*,#8077,.T.);+#8077 = EDGE_CURVE('',#8050,#8078,#8080,.T.);+#8078 = VERTEX_POINT('',#8079);+#8079 = CARTESIAN_POINT('',(-4.537145669057,-2.36,0.240004029399));+#8080 = SURFACE_CURVE('',#8081,(#8085,#8092),.PCURVE_S1.);+#8081 = LINE('',#8082,#8083);+#8082 = CARTESIAN_POINT('',(-3.954105448151,-2.36,1.249994963251));+#8083 = VECTOR('',#8084,1.);+#8084 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#8085 = PCURVE('',#7956,#8086);+#8086 = DEFINITIONAL_REPRESENTATION('',(#8087),#8091);+#8087 = LINE('',#8088,#8089);+#8088 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#8089 = VECTOR('',#8090,1.);+#8090 = DIRECTION('',(0.866054481515,0.499949632511));+#8091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8092 = PCURVE('',#8093,#8098);+#8093 = PLANE('',#8094);+#8094 = AXIS2_PLACEMENT_3D('',#8095,#8096,#8097);+#8095 = CARTESIAN_POINT('',(-4.006065227246,-2.54,1.159985897103));+#8096 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#8097 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#8098 = DEFINITIONAL_REPRESENTATION('',(#8099),#8103);+#8099 = LINE('',#8100,#8101);+#8100 = CARTESIAN_POINT('',(0.103930027578,0.18));+#8101 = VECTOR('',#8102,1.);+#8102 = DIRECTION('',(-1.,0.));+#8103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8104 = ORIENTED_EDGE('',*,*,#8105,.F.);+#8105 = EDGE_CURVE('',#8106,#8078,#8108,.T.);+#8106 = VERTEX_POINT('',#8107);+#8107 = CARTESIAN_POINT('',(-4.606430027578,-2.36,0.2));+#8108 = SURFACE_CURVE('',#8109,(#8114,#8125),.PCURVE_S1.);+#8109 = CIRCLE('',#8110,8.E-02);+#8110 = AXIS2_PLACEMENT_3D('',#8111,#8112,#8113);+#8111 = CARTESIAN_POINT('',(-4.606430027578,-2.36,0.28));+#8112 = DIRECTION('',(0.,-1.,0.));+#8113 = DIRECTION('',(0.,0.,1.));+#8114 = PCURVE('',#7956,#8115);+#8115 = DEFINITIONAL_REPRESENTATION('',(#8116),#8124);+#8116 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8117,#8118,#8119,#8120,+#8121,#8122,#8123),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8117 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#8118 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#8119 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#8120 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#8121 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#8122 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#8123 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#8124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8125 = PCURVE('',#8126,#8131);+#8126 = CYLINDRICAL_SURFACE('',#8127,8.E-02);+#8127 = AXIS2_PLACEMENT_3D('',#8128,#8129,#8130);+#8128 = CARTESIAN_POINT('',(-4.606430027578,-2.54,0.28));+#8129 = DIRECTION('',(0.,1.,0.));+#8130 = DIRECTION('',(0.,0.,1.));+#8131 = DEFINITIONAL_REPRESENTATION('',(#8132),#8136);+#8132 = LINE('',#8133,#8134);+#8133 = CARTESIAN_POINT('',(6.28318530718,0.18));+#8134 = VECTOR('',#8135,1.);+#8135 = DIRECTION('',(-1.,-0.));+#8136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8137 = ORIENTED_EDGE('',*,*,#8138,.T.);+#8138 = EDGE_CURVE('',#8106,#8139,#8141,.T.);+#8139 = VERTEX_POINT('',#8140);+#8140 = CARTESIAN_POINT('',(-5.255,-2.36,0.2));+#8141 = SURFACE_CURVE('',#8142,(#8146,#8153),.PCURVE_S1.);+#8142 = LINE('',#8143,#8144);+#8143 = CARTESIAN_POINT('',(-4.5025,-2.36,0.2));+#8144 = VECTOR('',#8145,1.);+#8145 = DIRECTION('',(-1.,-0.,-0.));+#8146 = PCURVE('',#7956,#8147);+#8147 = DEFINITIONAL_REPRESENTATION('',(#8148),#8152);+#8148 = LINE('',#8149,#8150);+#8149 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#8150 = VECTOR('',#8151,1.);+#8151 = DIRECTION('',(-0.,1.));+#8152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8153 = PCURVE('',#8154,#8159);+#8154 = PLANE('',#8155);+#8155 = AXIS2_PLACEMENT_3D('',#8156,#8157,#8158);+#8156 = CARTESIAN_POINT('',(-4.606430027578,-2.54,0.2));+#8157 = DIRECTION('',(0.,0.,1.));+#8158 = DIRECTION('',(1.,0.,0.));+#8159 = DEFINITIONAL_REPRESENTATION('',(#8160),#8164);+#8160 = LINE('',#8161,#8162);+#8161 = CARTESIAN_POINT('',(0.103930027578,0.18));+#8162 = VECTOR('',#8163,1.);+#8163 = DIRECTION('',(-1.,0.));+#8164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8165 = ORIENTED_EDGE('',*,*,#8166,.T.);+#8166 = EDGE_CURVE('',#8139,#8167,#8169,.T.);+#8167 = VERTEX_POINT('',#8168);+#8168 = CARTESIAN_POINT('',(-5.255,-2.36,0.));+#8169 = SURFACE_CURVE('',#8170,(#8174,#8181),.PCURVE_S1.);+#8170 = LINE('',#8171,#8172);+#8171 = CARTESIAN_POINT('',(-5.255,-2.36,1.223081297441E-02));+#8172 = VECTOR('',#8173,1.);+#8173 = DIRECTION('',(-0.,-0.,-1.));+#8174 = PCURVE('',#7956,#8175);+#8175 = DEFINITIONAL_REPRESENTATION('',(#8176),#8180);+#8176 = LINE('',#8177,#8178);+#8177 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#8178 = VECTOR('',#8179,1.);+#8179 = DIRECTION('',(1.,0.));+#8180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8181 = PCURVE('',#8182,#8187);+#8182 = PLANE('',#8183);+#8183 = AXIS2_PLACEMENT_3D('',#8184,#8185,#8186);+#8184 = CARTESIAN_POINT('',(-5.255,-3.22,-0.5));+#8185 = DIRECTION('',(-1.,0.,0.));+#8186 = DIRECTION('',(0.,0.,-1.));+#8187 = DEFINITIONAL_REPRESENTATION('',(#8188),#8192);+#8188 = LINE('',#8189,#8190);+#8189 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#8190 = VECTOR('',#8191,1.);+#8191 = DIRECTION('',(1.,0.));+#8192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8193 = ORIENTED_EDGE('',*,*,#8194,.F.);+#8194 = EDGE_CURVE('',#8195,#8167,#8197,.T.);+#8195 = VERTEX_POINT('',#8196);+#8196 = CARTESIAN_POINT('',(-4.606430027578,-2.36,-5.551115123126E-17));+#8197 = SURFACE_CURVE('',#8198,(#8202,#8209),.PCURVE_S1.);+#8198 = LINE('',#8199,#8200);+#8199 = CARTESIAN_POINT('',(-4.5025,-2.36,0.));+#8200 = VECTOR('',#8201,1.);+#8201 = DIRECTION('',(-1.,-0.,-0.));+#8202 = PCURVE('',#7956,#8203);+#8203 = DEFINITIONAL_REPRESENTATION('',(#8204),#8208);+#8204 = LINE('',#8205,#8206);+#8205 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#8206 = VECTOR('',#8207,1.);+#8207 = DIRECTION('',(-0.,1.));+#8208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8209 = PCURVE('',#8210,#8215);+#8210 = PLANE('',#8211);+#8211 = AXIS2_PLACEMENT_3D('',#8212,#8213,#8214);+#8212 = CARTESIAN_POINT('',(-4.606430027578,-2.54,0.));+#8213 = DIRECTION('',(0.,0.,1.));+#8214 = DIRECTION('',(1.,0.,0.));+#8215 = DEFINITIONAL_REPRESENTATION('',(#8216),#8220);+#8216 = LINE('',#8217,#8218);+#8217 = CARTESIAN_POINT('',(0.103930027578,0.18));+#8218 = VECTOR('',#8219,1.);+#8219 = DIRECTION('',(-1.,0.));+#8220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8221 = ORIENTED_EDGE('',*,*,#8222,.T.);+#8222 = EDGE_CURVE('',#8195,#8223,#8225,.T.);+#8223 = VERTEX_POINT('',#8224);+#8224 = CARTESIAN_POINT('',(-4.363934772754,-2.36,0.140014102897));+#8225 = SURFACE_CURVE('',#8226,(#8231,#8242),.PCURVE_S1.);+#8226 = CIRCLE('',#8227,0.28);+#8227 = AXIS2_PLACEMENT_3D('',#8228,#8229,#8230);+#8228 = CARTESIAN_POINT('',(-4.606430027578,-2.36,0.28));+#8229 = DIRECTION('',(0.,-1.,0.));+#8230 = DIRECTION('',(0.,0.,1.));+#8231 = PCURVE('',#7956,#8232);+#8232 = DEFINITIONAL_REPRESENTATION('',(#8233),#8241);+#8233 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8234,#8235,#8236,#8237,+#8238,#8239,#8240),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8234 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#8235 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#8236 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#8237 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#8238 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#8239 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#8240 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#8241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8242 = PCURVE('',#8243,#8248);+#8243 = CYLINDRICAL_SURFACE('',#8244,0.28);+#8244 = AXIS2_PLACEMENT_3D('',#8245,#8246,#8247);+#8245 = CARTESIAN_POINT('',(-4.606430027578,-2.54,0.28));+#8246 = DIRECTION('',(0.,1.,0.));+#8247 = DIRECTION('',(0.,0.,1.));+#8248 = DEFINITIONAL_REPRESENTATION('',(#8249),#8253);+#8249 = LINE('',#8250,#8251);+#8250 = CARTESIAN_POINT('',(6.28318530718,0.18));+#8251 = VECTOR('',#8252,1.);+#8252 = DIRECTION('',(-1.,-0.));+#8253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8254 = ORIENTED_EDGE('',*,*,#8255,.F.);+#8255 = EDGE_CURVE('',#8256,#8223,#8258,.T.);+#8256 = VERTEX_POINT('',#8257);+#8257 = CARTESIAN_POINT('',(-3.832854330943,-2.36,1.059995970601));+#8258 = SURFACE_CURVE('',#8259,(#8263,#8270),.PCURVE_S1.);+#8259 = LINE('',#8260,#8261);+#8260 = CARTESIAN_POINT('',(-3.780894551849,-2.36,1.150005036749));+#8261 = VECTOR('',#8262,1.);+#8262 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#8263 = PCURVE('',#7956,#8264);+#8264 = DEFINITIONAL_REPRESENTATION('',(#8265),#8269);+#8265 = LINE('',#8266,#8267);+#8266 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#8267 = VECTOR('',#8268,1.);+#8268 = DIRECTION('',(0.866054481515,0.499949632511));+#8269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8270 = PCURVE('',#8271,#8276);+#8271 = PLANE('',#8272);+#8272 = AXIS2_PLACEMENT_3D('',#8273,#8274,#8275);+#8273 = CARTESIAN_POINT('',(-3.832854330943,-2.54,1.059995970601));+#8274 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#8275 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#8276 = DEFINITIONAL_REPRESENTATION('',(#8277),#8281);+#8277 = LINE('',#8278,#8279);+#8278 = CARTESIAN_POINT('',(0.103930027578,0.18));+#8279 = VECTOR('',#8280,1.);+#8280 = DIRECTION('',(-1.,0.));+#8281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8282 = ORIENTED_EDGE('',*,*,#8283,.F.);+#8283 = EDGE_CURVE('',#8284,#8256,#8286,.T.);+#8284 = VERTEX_POINT('',#8285);+#8285 = CARTESIAN_POINT('',(-3.763569972422,-2.36,1.1));+#8286 = SURFACE_CURVE('',#8287,(#8292,#8303),.PCURVE_S1.);+#8287 = CIRCLE('',#8288,8.E-02);+#8288 = AXIS2_PLACEMENT_3D('',#8289,#8290,#8291);+#8289 = CARTESIAN_POINT('',(-3.763569972422,-2.36,1.02));+#8290 = DIRECTION('',(0.,-1.,0.));+#8291 = DIRECTION('',(0.,0.,1.));+#8292 = PCURVE('',#7956,#8293);+#8293 = DEFINITIONAL_REPRESENTATION('',(#8294),#8302);+#8294 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8295,#8296,#8297,#8298,+#8299,#8300,#8301),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8295 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#8296 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#8297 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#8298 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#8299 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#8300 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#8301 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#8302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8303 = PCURVE('',#8304,#8309);+#8304 = CYLINDRICAL_SURFACE('',#8305,8.E-02);+#8305 = AXIS2_PLACEMENT_3D('',#8306,#8307,#8308);+#8306 = CARTESIAN_POINT('',(-3.763569972422,-2.54,1.02));+#8307 = DIRECTION('',(0.,1.,0.));+#8308 = DIRECTION('',(0.,0.,1.));+#8309 = DEFINITIONAL_REPRESENTATION('',(#8310),#8314);+#8310 = LINE('',#8311,#8312);+#8311 = CARTESIAN_POINT('',(6.28318530718,0.18));+#8312 = VECTOR('',#8313,1.);+#8313 = DIRECTION('',(-1.,-0.));+#8314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8315 = ORIENTED_EDGE('',*,*,#8316,.F.);+#8316 = EDGE_CURVE('',#8317,#8284,#8319,.T.);+#8317 = VERTEX_POINT('',#8318);+#8318 = CARTESIAN_POINT('',(-3.4975,-2.36,1.1));+#8319 = SURFACE_CURVE('',#8320,(#8324,#8331),.PCURVE_S1.);+#8320 = LINE('',#8321,#8322);+#8321 = CARTESIAN_POINT('',(-3.4975,-2.36,1.1));+#8322 = VECTOR('',#8323,1.);+#8323 = DIRECTION('',(-1.,-0.,-0.));+#8324 = PCURVE('',#7956,#8325);+#8325 = DEFINITIONAL_REPRESENTATION('',(#8326),#8330);+#8326 = LINE('',#8327,#8328);+#8327 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#8328 = VECTOR('',#8329,1.);+#8329 = DIRECTION('',(-0.,1.));+#8330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8331 = PCURVE('',#8332,#8337);+#8332 = PLANE('',#8333);+#8333 = AXIS2_PLACEMENT_3D('',#8334,#8335,#8336);+#8334 = CARTESIAN_POINT('',(-3.4975,-2.54,1.1));+#8335 = DIRECTION('',(0.,0.,1.));+#8336 = DIRECTION('',(1.,0.,0.));+#8337 = DEFINITIONAL_REPRESENTATION('',(#8338),#8342);+#8338 = LINE('',#8339,#8340);+#8339 = CARTESIAN_POINT('',(0.,0.18));+#8340 = VECTOR('',#8341,1.);+#8341 = DIRECTION('',(-1.,0.));+#8342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8343 = ORIENTED_EDGE('',*,*,#8344,.F.);+#8344 = EDGE_CURVE('',#8345,#8317,#8347,.T.);+#8345 = VERTEX_POINT('',#8346);+#8346 = CARTESIAN_POINT('',(-3.4475,-2.36,1.113397459622));+#8347 = SURFACE_CURVE('',#8348,(#8353,#8360),.PCURVE_S1.);+#8348 = CIRCLE('',#8349,0.1);+#8349 = AXIS2_PLACEMENT_3D('',#8350,#8351,#8352);+#8350 = CARTESIAN_POINT('',(-3.4975,-2.36,1.2));+#8351 = DIRECTION('',(0.,1.,-0.));+#8352 = DIRECTION('',(-1.,0.,0.));+#8353 = PCURVE('',#7956,#8354);+#8354 = DEFINITIONAL_REPRESENTATION('',(#8355),#8359);+#8355 = CIRCLE('',#8356,0.1);+#8356 = AXIS2_PLACEMENT_2D('',#8357,#8358);+#8357 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#8358 = DIRECTION('',(0.,1.));+#8359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8360 = PCURVE('',#8361,#8366);+#8361 = CYLINDRICAL_SURFACE('',#8362,0.1);+#8362 = AXIS2_PLACEMENT_3D('',#8363,#8364,#8365);+#8363 = CARTESIAN_POINT('',(-3.4975,-2.54,1.2));+#8364 = DIRECTION('',(0.,1.,0.));+#8365 = DIRECTION('',(-1.,-0.,-0.));+#8366 = DEFINITIONAL_REPRESENTATION('',(#8367),#8371);+#8367 = LINE('',#8368,#8369);+#8368 = CARTESIAN_POINT('',(-0.,0.18));+#8369 = VECTOR('',#8370,1.);+#8370 = DIRECTION('',(1.,-0.));+#8371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8372 = ORIENTED_EDGE('',*,*,#8373,.F.);+#8373 = EDGE_CURVE('',#7914,#8345,#8374,.T.);+#8374 = SURFACE_CURVE('',#8375,(#8379,#8386),.PCURVE_S1.);+#8375 = LINE('',#8376,#8377);+#8376 = CARTESIAN_POINT('',(-3.4475,-2.36,1.223081297441E-02));+#8377 = VECTOR('',#8378,1.);+#8378 = DIRECTION('',(-0.,-0.,-1.));+#8379 = PCURVE('',#7956,#8380);+#8380 = DEFINITIONAL_REPRESENTATION('',(#8381),#8385);+#8381 = LINE('',#8382,#8383);+#8382 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#8383 = VECTOR('',#8384,1.);+#8384 = DIRECTION('',(1.,0.));+#8385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8386 = PCURVE('',#7929,#8387);+#8387 = DEFINITIONAL_REPRESENTATION('',(#8388),#8392);+#8388 = LINE('',#8389,#8390);+#8389 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#8390 = VECTOR('',#8391,1.);+#8391 = DIRECTION('',(1.,0.));+#8392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8393 = ADVANCED_FACE('',(#8394),#7929,.F.);+#8394 = FACE_BOUND('',#8395,.T.);+#8395 = EDGE_LOOP('',(#8396,#8397,#8420,#8441));+#8396 = ORIENTED_EDGE('',*,*,#7913,.F.);+#8397 = ORIENTED_EDGE('',*,*,#8398,.T.);+#8398 = EDGE_CURVE('',#7885,#8399,#8401,.T.);+#8399 = VERTEX_POINT('',#8400);+#8400 = CARTESIAN_POINT('',(-3.4475,-2.72,1.113397459622));+#8401 = SURFACE_CURVE('',#8402,(#8406,#8413),.PCURVE_S1.);+#8402 = LINE('',#8403,#8404);+#8403 = CARTESIAN_POINT('',(-3.4475,-2.72,1.223081297441E-02));+#8404 = VECTOR('',#8405,1.);+#8405 = DIRECTION('',(-0.,-0.,-1.));+#8406 = PCURVE('',#7929,#8407);+#8407 = DEFINITIONAL_REPRESENTATION('',(#8408),#8412);+#8408 = LINE('',#8409,#8410);+#8409 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#8410 = VECTOR('',#8411,1.);+#8411 = DIRECTION('',(1.,0.));+#8412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8413 = PCURVE('',#7901,#8414);+#8414 = DEFINITIONAL_REPRESENTATION('',(#8415),#8419);+#8415 = LINE('',#8416,#8417);+#8416 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#8417 = VECTOR('',#8418,1.);+#8418 = DIRECTION('',(1.,0.));+#8419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8420 = ORIENTED_EDGE('',*,*,#8421,.T.);+#8421 = EDGE_CURVE('',#8399,#8345,#8422,.T.);+#8422 = SURFACE_CURVE('',#8423,(#8427,#8434),.PCURVE_S1.);+#8423 = LINE('',#8424,#8425);+#8424 = CARTESIAN_POINT('',(-3.4475,-2.54,1.113397459622));+#8425 = VECTOR('',#8426,1.);+#8426 = DIRECTION('',(0.,1.,0.));+#8427 = PCURVE('',#7929,#8428);+#8428 = DEFINITIONAL_REPRESENTATION('',(#8429),#8433);+#8429 = LINE('',#8430,#8431);+#8430 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#8431 = VECTOR('',#8432,1.);+#8432 = DIRECTION('',(0.,-1.));+#8433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8434 = PCURVE('',#8361,#8435);+#8435 = DEFINITIONAL_REPRESENTATION('',(#8436),#8440);+#8436 = LINE('',#8437,#8438);+#8437 = CARTESIAN_POINT('',(4.188790204786,0.));+#8438 = VECTOR('',#8439,1.);+#8439 = DIRECTION('',(0.,1.));+#8440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8441 = ORIENTED_EDGE('',*,*,#8373,.F.);+#8442 = ADVANCED_FACE('',(#8443),#7901,.F.);+#8443 = FACE_BOUND('',#8444,.T.);+#8444 = EDGE_LOOP('',(#8445,#8446,#8447,#8475,#8498,#8526,#8549,#8572,+ #8595,#8623,#8646,#8674,#8697,#8719));+#8445 = ORIENTED_EDGE('',*,*,#7884,.F.);+#8446 = ORIENTED_EDGE('',*,*,#7972,.T.);+#8447 = ORIENTED_EDGE('',*,*,#8448,.T.);+#8448 = EDGE_CURVE('',#7973,#8449,#8451,.T.);+#8449 = VERTEX_POINT('',#8450);+#8450 = CARTESIAN_POINT('',(-4.006065227246,-2.72,1.159985897103));+#8451 = SURFACE_CURVE('',#8452,(#8457,#8468),.PCURVE_S1.);+#8452 = CIRCLE('',#8453,0.28);+#8453 = AXIS2_PLACEMENT_3D('',#8454,#8455,#8456);+#8454 = CARTESIAN_POINT('',(-3.763569972422,-2.72,1.02));+#8455 = DIRECTION('',(0.,-1.,0.));+#8456 = DIRECTION('',(0.,0.,1.));+#8457 = PCURVE('',#7901,#8458);+#8458 = DEFINITIONAL_REPRESENTATION('',(#8459),#8467);+#8459 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8460,#8461,#8462,#8463,+#8464,#8465,#8466),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8460 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#8461 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#8462 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#8463 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#8464 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#8465 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#8466 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#8467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8468 = PCURVE('',#8011,#8469);+#8469 = DEFINITIONAL_REPRESENTATION('',(#8470),#8474);+#8470 = LINE('',#8471,#8472);+#8471 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#8472 = VECTOR('',#8473,1.);+#8473 = DIRECTION('',(-1.,0.));+#8474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8475 = ORIENTED_EDGE('',*,*,#8476,.T.);+#8476 = EDGE_CURVE('',#8449,#8477,#8479,.T.);+#8477 = VERTEX_POINT('',#8478);+#8478 = CARTESIAN_POINT('',(-4.537145669057,-2.72,0.240004029399));+#8479 = SURFACE_CURVE('',#8480,(#8484,#8491),.PCURVE_S1.);+#8480 = LINE('',#8481,#8482);+#8481 = CARTESIAN_POINT('',(-3.954105448151,-2.72,1.249994963251));+#8482 = VECTOR('',#8483,1.);+#8483 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#8484 = PCURVE('',#7901,#8485);+#8485 = DEFINITIONAL_REPRESENTATION('',(#8486),#8490);+#8486 = LINE('',#8487,#8488);+#8487 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#8488 = VECTOR('',#8489,1.);+#8489 = DIRECTION('',(0.866054481515,0.499949632511));+#8490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8491 = PCURVE('',#8093,#8492);+#8492 = DEFINITIONAL_REPRESENTATION('',(#8493),#8497);+#8493 = LINE('',#8494,#8495);+#8494 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#8495 = VECTOR('',#8496,1.);+#8496 = DIRECTION('',(-1.,0.));+#8497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8498 = ORIENTED_EDGE('',*,*,#8499,.F.);+#8499 = EDGE_CURVE('',#8500,#8477,#8502,.T.);+#8500 = VERTEX_POINT('',#8501);+#8501 = CARTESIAN_POINT('',(-4.606430027578,-2.72,0.2));+#8502 = SURFACE_CURVE('',#8503,(#8508,#8519),.PCURVE_S1.);+#8503 = CIRCLE('',#8504,8.E-02);+#8504 = AXIS2_PLACEMENT_3D('',#8505,#8506,#8507);+#8505 = CARTESIAN_POINT('',(-4.606430027578,-2.72,0.28));+#8506 = DIRECTION('',(0.,-1.,0.));+#8507 = DIRECTION('',(0.,0.,1.));+#8508 = PCURVE('',#7901,#8509);+#8509 = DEFINITIONAL_REPRESENTATION('',(#8510),#8518);+#8510 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8511,#8512,#8513,#8514,+#8515,#8516,#8517),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8511 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#8512 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#8513 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#8514 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#8515 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#8516 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#8517 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#8518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8519 = PCURVE('',#8126,#8520);+#8520 = DEFINITIONAL_REPRESENTATION('',(#8521),#8525);+#8521 = LINE('',#8522,#8523);+#8522 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#8523 = VECTOR('',#8524,1.);+#8524 = DIRECTION('',(-1.,0.));+#8525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8526 = ORIENTED_EDGE('',*,*,#8527,.T.);+#8527 = EDGE_CURVE('',#8500,#8528,#8530,.T.);+#8528 = VERTEX_POINT('',#8529);+#8529 = CARTESIAN_POINT('',(-5.255,-2.72,0.2));+#8530 = SURFACE_CURVE('',#8531,(#8535,#8542),.PCURVE_S1.);+#8531 = LINE('',#8532,#8533);+#8532 = CARTESIAN_POINT('',(-4.5025,-2.72,0.2));+#8533 = VECTOR('',#8534,1.);+#8534 = DIRECTION('',(-1.,-0.,-0.));+#8535 = PCURVE('',#7901,#8536);+#8536 = DEFINITIONAL_REPRESENTATION('',(#8537),#8541);+#8537 = LINE('',#8538,#8539);+#8538 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#8539 = VECTOR('',#8540,1.);+#8540 = DIRECTION('',(-0.,1.));+#8541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8542 = PCURVE('',#8154,#8543);+#8543 = DEFINITIONAL_REPRESENTATION('',(#8544),#8548);+#8544 = LINE('',#8545,#8546);+#8545 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#8546 = VECTOR('',#8547,1.);+#8547 = DIRECTION('',(-1.,0.));+#8548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8549 = ORIENTED_EDGE('',*,*,#8550,.T.);+#8550 = EDGE_CURVE('',#8528,#8551,#8553,.T.);+#8551 = VERTEX_POINT('',#8552);+#8552 = CARTESIAN_POINT('',(-5.255,-2.72,0.));+#8553 = SURFACE_CURVE('',#8554,(#8558,#8565),.PCURVE_S1.);+#8554 = LINE('',#8555,#8556);+#8555 = CARTESIAN_POINT('',(-5.255,-2.72,1.223081297441E-02));+#8556 = VECTOR('',#8557,1.);+#8557 = DIRECTION('',(-0.,-0.,-1.));+#8558 = PCURVE('',#7901,#8559);+#8559 = DEFINITIONAL_REPRESENTATION('',(#8560),#8564);+#8560 = LINE('',#8561,#8562);+#8561 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#8562 = VECTOR('',#8563,1.);+#8563 = DIRECTION('',(1.,0.));+#8564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8565 = PCURVE('',#8182,#8566);+#8566 = DEFINITIONAL_REPRESENTATION('',(#8567),#8571);+#8567 = LINE('',#8568,#8569);+#8568 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#8569 = VECTOR('',#8570,1.);+#8570 = DIRECTION('',(1.,0.));+#8571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8572 = ORIENTED_EDGE('',*,*,#8573,.F.);+#8573 = EDGE_CURVE('',#8574,#8551,#8576,.T.);+#8574 = VERTEX_POINT('',#8575);+#8575 = CARTESIAN_POINT('',(-4.606430027578,-2.72,-5.551115123126E-17));+#8576 = SURFACE_CURVE('',#8577,(#8581,#8588),.PCURVE_S1.);+#8577 = LINE('',#8578,#8579);+#8578 = CARTESIAN_POINT('',(-4.5025,-2.72,0.));+#8579 = VECTOR('',#8580,1.);+#8580 = DIRECTION('',(-1.,-0.,-0.));+#8581 = PCURVE('',#7901,#8582);+#8582 = DEFINITIONAL_REPRESENTATION('',(#8583),#8587);+#8583 = LINE('',#8584,#8585);+#8584 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#8585 = VECTOR('',#8586,1.);+#8586 = DIRECTION('',(-0.,1.));+#8587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8588 = PCURVE('',#8210,#8589);+#8589 = DEFINITIONAL_REPRESENTATION('',(#8590),#8594);+#8590 = LINE('',#8591,#8592);+#8591 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#8592 = VECTOR('',#8593,1.);+#8593 = DIRECTION('',(-1.,0.));+#8594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8595 = ORIENTED_EDGE('',*,*,#8596,.T.);+#8596 = EDGE_CURVE('',#8574,#8597,#8599,.T.);+#8597 = VERTEX_POINT('',#8598);+#8598 = CARTESIAN_POINT('',(-4.363934772754,-2.72,0.140014102897));+#8599 = SURFACE_CURVE('',#8600,(#8605,#8616),.PCURVE_S1.);+#8600 = CIRCLE('',#8601,0.28);+#8601 = AXIS2_PLACEMENT_3D('',#8602,#8603,#8604);+#8602 = CARTESIAN_POINT('',(-4.606430027578,-2.72,0.28));+#8603 = DIRECTION('',(0.,-1.,0.));+#8604 = DIRECTION('',(0.,0.,1.));+#8605 = PCURVE('',#7901,#8606);+#8606 = DEFINITIONAL_REPRESENTATION('',(#8607),#8615);+#8607 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8608,#8609,#8610,#8611,+#8612,#8613,#8614),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8608 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#8609 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#8610 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#8611 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#8612 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#8613 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#8614 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#8615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8616 = PCURVE('',#8243,#8617);+#8617 = DEFINITIONAL_REPRESENTATION('',(#8618),#8622);+#8618 = LINE('',#8619,#8620);+#8619 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#8620 = VECTOR('',#8621,1.);+#8621 = DIRECTION('',(-1.,0.));+#8622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8623 = ORIENTED_EDGE('',*,*,#8624,.F.);+#8624 = EDGE_CURVE('',#8625,#8597,#8627,.T.);+#8625 = VERTEX_POINT('',#8626);+#8626 = CARTESIAN_POINT('',(-3.832854330943,-2.72,1.059995970601));+#8627 = SURFACE_CURVE('',#8628,(#8632,#8639),.PCURVE_S1.);+#8628 = LINE('',#8629,#8630);+#8629 = CARTESIAN_POINT('',(-3.780894551849,-2.72,1.150005036749));+#8630 = VECTOR('',#8631,1.);+#8631 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#8632 = PCURVE('',#7901,#8633);+#8633 = DEFINITIONAL_REPRESENTATION('',(#8634),#8638);+#8634 = LINE('',#8635,#8636);+#8635 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#8636 = VECTOR('',#8637,1.);+#8637 = DIRECTION('',(0.866054481515,0.499949632511));+#8638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8639 = PCURVE('',#8271,#8640);+#8640 = DEFINITIONAL_REPRESENTATION('',(#8641),#8645);+#8641 = LINE('',#8642,#8643);+#8642 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#8643 = VECTOR('',#8644,1.);+#8644 = DIRECTION('',(-1.,0.));+#8645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8646 = ORIENTED_EDGE('',*,*,#8647,.F.);+#8647 = EDGE_CURVE('',#8648,#8625,#8650,.T.);+#8648 = VERTEX_POINT('',#8649);+#8649 = CARTESIAN_POINT('',(-3.763569972422,-2.72,1.1));+#8650 = SURFACE_CURVE('',#8651,(#8656,#8667),.PCURVE_S1.);+#8651 = CIRCLE('',#8652,8.E-02);+#8652 = AXIS2_PLACEMENT_3D('',#8653,#8654,#8655);+#8653 = CARTESIAN_POINT('',(-3.763569972422,-2.72,1.02));+#8654 = DIRECTION('',(0.,-1.,0.));+#8655 = DIRECTION('',(0.,0.,1.));+#8656 = PCURVE('',#7901,#8657);+#8657 = DEFINITIONAL_REPRESENTATION('',(#8658),#8666);+#8658 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8659,#8660,#8661,#8662,+#8663,#8664,#8665),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8659 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#8660 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#8661 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#8662 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#8663 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#8664 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#8665 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#8666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8667 = PCURVE('',#8304,#8668);+#8668 = DEFINITIONAL_REPRESENTATION('',(#8669),#8673);+#8669 = LINE('',#8670,#8671);+#8670 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#8671 = VECTOR('',#8672,1.);+#8672 = DIRECTION('',(-1.,0.));+#8673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8674 = ORIENTED_EDGE('',*,*,#8675,.F.);+#8675 = EDGE_CURVE('',#8676,#8648,#8678,.T.);+#8676 = VERTEX_POINT('',#8677);+#8677 = CARTESIAN_POINT('',(-3.4975,-2.72,1.1));+#8678 = SURFACE_CURVE('',#8679,(#8683,#8690),.PCURVE_S1.);+#8679 = LINE('',#8680,#8681);+#8680 = CARTESIAN_POINT('',(-3.4975,-2.72,1.1));+#8681 = VECTOR('',#8682,1.);+#8682 = DIRECTION('',(-1.,-0.,-0.));+#8683 = PCURVE('',#7901,#8684);+#8684 = DEFINITIONAL_REPRESENTATION('',(#8685),#8689);+#8685 = LINE('',#8686,#8687);+#8686 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#8687 = VECTOR('',#8688,1.);+#8688 = DIRECTION('',(-0.,1.));+#8689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8690 = PCURVE('',#8332,#8691);+#8691 = DEFINITIONAL_REPRESENTATION('',(#8692),#8696);+#8692 = LINE('',#8693,#8694);+#8693 = CARTESIAN_POINT('',(0.,-0.18));+#8694 = VECTOR('',#8695,1.);+#8695 = DIRECTION('',(-1.,0.));+#8696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8697 = ORIENTED_EDGE('',*,*,#8698,.F.);+#8698 = EDGE_CURVE('',#8399,#8676,#8699,.T.);+#8699 = SURFACE_CURVE('',#8700,(#8705,#8712),.PCURVE_S1.);+#8700 = CIRCLE('',#8701,0.1);+#8701 = AXIS2_PLACEMENT_3D('',#8702,#8703,#8704);+#8702 = CARTESIAN_POINT('',(-3.4975,-2.72,1.2));+#8703 = DIRECTION('',(0.,1.,-0.));+#8704 = DIRECTION('',(-1.,0.,0.));+#8705 = PCURVE('',#7901,#8706);+#8706 = DEFINITIONAL_REPRESENTATION('',(#8707),#8711);+#8707 = CIRCLE('',#8708,0.1);+#8708 = AXIS2_PLACEMENT_2D('',#8709,#8710);+#8709 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#8710 = DIRECTION('',(0.,1.));+#8711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8712 = PCURVE('',#8361,#8713);+#8713 = DEFINITIONAL_REPRESENTATION('',(#8714),#8718);+#8714 = LINE('',#8715,#8716);+#8715 = CARTESIAN_POINT('',(0.,-0.18));+#8716 = VECTOR('',#8717,1.);+#8717 = DIRECTION('',(1.,0.));+#8718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8719 = ORIENTED_EDGE('',*,*,#8398,.F.);+#8720 = ADVANCED_FACE('',(#8721),#8011,.T.);+#8721 = FACE_BOUND('',#8722,.T.);+#8722 = EDGE_LOOP('',(#8723,#8724,#8745,#8746));+#8723 = ORIENTED_EDGE('',*,*,#8049,.T.);+#8724 = ORIENTED_EDGE('',*,*,#8725,.F.);+#8725 = EDGE_CURVE('',#8449,#8050,#8726,.T.);+#8726 = SURFACE_CURVE('',#8727,(#8731,#8738),.PCURVE_S1.);+#8727 = LINE('',#8728,#8729);+#8728 = CARTESIAN_POINT('',(-4.006065227246,-2.72,1.159985897103));+#8729 = VECTOR('',#8730,1.);+#8730 = DIRECTION('',(0.,1.,0.));+#8731 = PCURVE('',#8011,#8732);+#8732 = DEFINITIONAL_REPRESENTATION('',(#8733),#8737);+#8733 = LINE('',#8734,#8735);+#8734 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#8735 = VECTOR('',#8736,1.);+#8736 = DIRECTION('',(0.,1.));+#8737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8738 = PCURVE('',#8093,#8739);+#8739 = DEFINITIONAL_REPRESENTATION('',(#8740),#8744);+#8740 = LINE('',#8741,#8742);+#8741 = CARTESIAN_POINT('',(0.,-0.18));+#8742 = VECTOR('',#8743,1.);+#8743 = DIRECTION('',(0.,1.));+#8744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8745 = ORIENTED_EDGE('',*,*,#8448,.F.);+#8746 = ORIENTED_EDGE('',*,*,#7995,.T.);+#8747 = ADVANCED_FACE('',(#8748),#8361,.T.);+#8748 = FACE_BOUND('',#8749,.T.);+#8749 = EDGE_LOOP('',(#8750,#8751,#8752,#8773));+#8750 = ORIENTED_EDGE('',*,*,#8421,.F.);+#8751 = ORIENTED_EDGE('',*,*,#8698,.T.);+#8752 = ORIENTED_EDGE('',*,*,#8753,.F.);+#8753 = EDGE_CURVE('',#8317,#8676,#8754,.T.);+#8754 = SURFACE_CURVE('',#8755,(#8759,#8766),.PCURVE_S1.);+#8755 = LINE('',#8756,#8757);+#8756 = CARTESIAN_POINT('',(-3.4975,-2.36,1.1));+#8757 = VECTOR('',#8758,1.);+#8758 = DIRECTION('',(-0.,-1.,-0.));+#8759 = PCURVE('',#8361,#8760);+#8760 = DEFINITIONAL_REPRESENTATION('',(#8761),#8765);+#8761 = LINE('',#8762,#8763);+#8762 = CARTESIAN_POINT('',(4.712388980385,0.18));+#8763 = VECTOR('',#8764,1.);+#8764 = DIRECTION('',(0.,-1.));+#8765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8766 = PCURVE('',#8332,#8767);+#8767 = DEFINITIONAL_REPRESENTATION('',(#8768),#8772);+#8768 = LINE('',#8769,#8770);+#8769 = CARTESIAN_POINT('',(0.,0.18));+#8770 = VECTOR('',#8771,1.);+#8771 = DIRECTION('',(0.,-1.));+#8772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8773 = ORIENTED_EDGE('',*,*,#8344,.F.);+#8774 = ADVANCED_FACE('',(#8775),#8332,.F.);+#8775 = FACE_BOUND('',#8776,.T.);+#8776 = EDGE_LOOP('',(#8777,#8778,#8799,#8800));+#8777 = ORIENTED_EDGE('',*,*,#8675,.T.);+#8778 = ORIENTED_EDGE('',*,*,#8779,.F.);+#8779 = EDGE_CURVE('',#8284,#8648,#8780,.T.);+#8780 = SURFACE_CURVE('',#8781,(#8785,#8792),.PCURVE_S1.);+#8781 = LINE('',#8782,#8783);+#8782 = CARTESIAN_POINT('',(-3.763569972422,-2.36,1.1));+#8783 = VECTOR('',#8784,1.);+#8784 = DIRECTION('',(-0.,-1.,-0.));+#8785 = PCURVE('',#8332,#8786);+#8786 = DEFINITIONAL_REPRESENTATION('',(#8787),#8791);+#8787 = LINE('',#8788,#8789);+#8788 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#8789 = VECTOR('',#8790,1.);+#8790 = DIRECTION('',(0.,-1.));+#8791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8792 = PCURVE('',#8304,#8793);+#8793 = DEFINITIONAL_REPRESENTATION('',(#8794),#8798);+#8794 = LINE('',#8795,#8796);+#8795 = CARTESIAN_POINT('',(6.28318530718,0.18));+#8796 = VECTOR('',#8797,1.);+#8797 = DIRECTION('',(-0.,-1.));+#8798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8799 = ORIENTED_EDGE('',*,*,#8316,.F.);+#8800 = ORIENTED_EDGE('',*,*,#8753,.T.);+#8801 = ADVANCED_FACE('',(#8802),#8304,.F.);+#8802 = FACE_BOUND('',#8803,.F.);+#8803 = EDGE_LOOP('',(#8804,#8805,#8806,#8827));+#8804 = ORIENTED_EDGE('',*,*,#8779,.F.);+#8805 = ORIENTED_EDGE('',*,*,#8283,.T.);+#8806 = ORIENTED_EDGE('',*,*,#8807,.T.);+#8807 = EDGE_CURVE('',#8256,#8625,#8808,.T.);+#8808 = SURFACE_CURVE('',#8809,(#8813,#8820),.PCURVE_S1.);+#8809 = LINE('',#8810,#8811);+#8810 = CARTESIAN_POINT('',(-3.832854330943,-2.36,1.059995970601));+#8811 = VECTOR('',#8812,1.);+#8812 = DIRECTION('',(-0.,-1.,-0.));+#8813 = PCURVE('',#8304,#8814);+#8814 = DEFINITIONAL_REPRESENTATION('',(#8815),#8819);+#8815 = LINE('',#8816,#8817);+#8816 = CARTESIAN_POINT('',(5.235929597593,0.18));+#8817 = VECTOR('',#8818,1.);+#8818 = DIRECTION('',(-0.,-1.));+#8819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8820 = PCURVE('',#8271,#8821);+#8821 = DEFINITIONAL_REPRESENTATION('',(#8822),#8826);+#8822 = LINE('',#8823,#8824);+#8823 = CARTESIAN_POINT('',(0.,0.18));+#8824 = VECTOR('',#8825,1.);+#8825 = DIRECTION('',(0.,-1.));+#8826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8827 = ORIENTED_EDGE('',*,*,#8647,.F.);+#8828 = ADVANCED_FACE('',(#8829),#8271,.F.);+#8829 = FACE_BOUND('',#8830,.T.);+#8830 = EDGE_LOOP('',(#8831,#8832,#8853,#8854));+#8831 = ORIENTED_EDGE('',*,*,#8624,.T.);+#8832 = ORIENTED_EDGE('',*,*,#8833,.F.);+#8833 = EDGE_CURVE('',#8223,#8597,#8834,.T.);+#8834 = SURFACE_CURVE('',#8835,(#8839,#8846),.PCURVE_S1.);+#8835 = LINE('',#8836,#8837);+#8836 = CARTESIAN_POINT('',(-4.363934772754,-2.36,0.140014102897));+#8837 = VECTOR('',#8838,1.);+#8838 = DIRECTION('',(-0.,-1.,-0.));+#8839 = PCURVE('',#8271,#8840);+#8840 = DEFINITIONAL_REPRESENTATION('',(#8841),#8845);+#8841 = LINE('',#8842,#8843);+#8842 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#8843 = VECTOR('',#8844,1.);+#8844 = DIRECTION('',(0.,-1.));+#8845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8846 = PCURVE('',#8243,#8847);+#8847 = DEFINITIONAL_REPRESENTATION('',(#8848),#8852);+#8848 = LINE('',#8849,#8850);+#8849 = CARTESIAN_POINT('',(2.094336944003,0.18));+#8850 = VECTOR('',#8851,1.);+#8851 = DIRECTION('',(-0.,-1.));+#8852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8853 = ORIENTED_EDGE('',*,*,#8255,.F.);+#8854 = ORIENTED_EDGE('',*,*,#8807,.T.);+#8855 = ADVANCED_FACE('',(#8856),#8243,.T.);+#8856 = FACE_BOUND('',#8857,.T.);+#8857 = EDGE_LOOP('',(#8858,#8879,#8880,#8881));+#8858 = ORIENTED_EDGE('',*,*,#8859,.F.);+#8859 = EDGE_CURVE('',#8195,#8574,#8860,.T.);+#8860 = SURFACE_CURVE('',#8861,(#8865,#8872),.PCURVE_S1.);+#8861 = LINE('',#8862,#8863);+#8862 = CARTESIAN_POINT('',(-4.606430027578,-2.36,-5.551115123126E-17));+#8863 = VECTOR('',#8864,1.);+#8864 = DIRECTION('',(-0.,-1.,-0.));+#8865 = PCURVE('',#8243,#8866);+#8866 = DEFINITIONAL_REPRESENTATION('',(#8867),#8871);+#8867 = LINE('',#8868,#8869);+#8868 = CARTESIAN_POINT('',(3.14159265359,0.18));+#8869 = VECTOR('',#8870,1.);+#8870 = DIRECTION('',(-0.,-1.));+#8871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8872 = PCURVE('',#8210,#8873);+#8873 = DEFINITIONAL_REPRESENTATION('',(#8874),#8878);+#8874 = LINE('',#8875,#8876);+#8875 = CARTESIAN_POINT('',(0.,0.18));+#8876 = VECTOR('',#8877,1.);+#8877 = DIRECTION('',(0.,-1.));+#8878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8879 = ORIENTED_EDGE('',*,*,#8222,.T.);+#8880 = ORIENTED_EDGE('',*,*,#8833,.T.);+#8881 = ORIENTED_EDGE('',*,*,#8596,.F.);+#8882 = ADVANCED_FACE('',(#8883),#8210,.F.);+#8883 = FACE_BOUND('',#8884,.T.);+#8884 = EDGE_LOOP('',(#8885,#8886,#8887,#8908));+#8885 = ORIENTED_EDGE('',*,*,#8859,.T.);+#8886 = ORIENTED_EDGE('',*,*,#8573,.T.);+#8887 = ORIENTED_EDGE('',*,*,#8888,.T.);+#8888 = EDGE_CURVE('',#8551,#8167,#8889,.T.);+#8889 = SURFACE_CURVE('',#8890,(#8894,#8901),.PCURVE_S1.);+#8890 = LINE('',#8891,#8892);+#8891 = CARTESIAN_POINT('',(-5.255,-2.88,0.));+#8892 = VECTOR('',#8893,1.);+#8893 = DIRECTION('',(0.,1.,0.));+#8894 = PCURVE('',#8210,#8895);+#8895 = DEFINITIONAL_REPRESENTATION('',(#8896),#8900);+#8896 = LINE('',#8897,#8898);+#8897 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#8898 = VECTOR('',#8899,1.);+#8899 = DIRECTION('',(0.,1.));+#8900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8901 = PCURVE('',#8182,#8902);+#8902 = DEFINITIONAL_REPRESENTATION('',(#8903),#8907);+#8903 = LINE('',#8904,#8905);+#8904 = CARTESIAN_POINT('',(-0.5,-0.34));+#8905 = VECTOR('',#8906,1.);+#8906 = DIRECTION('',(0.,-1.));+#8907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8908 = ORIENTED_EDGE('',*,*,#8194,.F.);+#8909 = ADVANCED_FACE('',(#8910),#8182,.T.);+#8910 = FACE_BOUND('',#8911,.F.);+#8911 = EDGE_LOOP('',(#8912,#8933,#8934,#8935));+#8912 = ORIENTED_EDGE('',*,*,#8913,.F.);+#8913 = EDGE_CURVE('',#8528,#8139,#8914,.T.);+#8914 = SURFACE_CURVE('',#8915,(#8919,#8926),.PCURVE_S1.);+#8915 = LINE('',#8916,#8917);+#8916 = CARTESIAN_POINT('',(-5.255,-2.88,0.2));+#8917 = VECTOR('',#8918,1.);+#8918 = DIRECTION('',(0.,1.,0.));+#8919 = PCURVE('',#8182,#8920);+#8920 = DEFINITIONAL_REPRESENTATION('',(#8921),#8925);+#8921 = LINE('',#8922,#8923);+#8922 = CARTESIAN_POINT('',(-0.7,-0.34));+#8923 = VECTOR('',#8924,1.);+#8924 = DIRECTION('',(0.,-1.));+#8925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8926 = PCURVE('',#8154,#8927);+#8927 = DEFINITIONAL_REPRESENTATION('',(#8928),#8932);+#8928 = LINE('',#8929,#8930);+#8929 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#8930 = VECTOR('',#8931,1.);+#8931 = DIRECTION('',(0.,1.));+#8932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8933 = ORIENTED_EDGE('',*,*,#8550,.T.);+#8934 = ORIENTED_EDGE('',*,*,#8888,.T.);+#8935 = ORIENTED_EDGE('',*,*,#8166,.F.);+#8936 = ADVANCED_FACE('',(#8937),#8154,.T.);+#8937 = FACE_BOUND('',#8938,.F.);+#8938 = EDGE_LOOP('',(#8939,#8960,#8961,#8962));+#8939 = ORIENTED_EDGE('',*,*,#8940,.T.);+#8940 = EDGE_CURVE('',#8106,#8500,#8941,.T.);+#8941 = SURFACE_CURVE('',#8942,(#8946,#8953),.PCURVE_S1.);+#8942 = LINE('',#8943,#8944);+#8943 = CARTESIAN_POINT('',(-4.606430027578,-2.36,0.2));+#8944 = VECTOR('',#8945,1.);+#8945 = DIRECTION('',(-0.,-1.,-0.));+#8946 = PCURVE('',#8154,#8947);+#8947 = DEFINITIONAL_REPRESENTATION('',(#8948),#8952);+#8948 = LINE('',#8949,#8950);+#8949 = CARTESIAN_POINT('',(0.,0.18));+#8950 = VECTOR('',#8951,1.);+#8951 = DIRECTION('',(0.,-1.));+#8952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8953 = PCURVE('',#8126,#8954);+#8954 = DEFINITIONAL_REPRESENTATION('',(#8955),#8959);+#8955 = LINE('',#8956,#8957);+#8956 = CARTESIAN_POINT('',(3.14159265359,0.18));+#8957 = VECTOR('',#8958,1.);+#8958 = DIRECTION('',(-0.,-1.));+#8959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8960 = ORIENTED_EDGE('',*,*,#8527,.T.);+#8961 = ORIENTED_EDGE('',*,*,#8913,.T.);+#8962 = ORIENTED_EDGE('',*,*,#8138,.F.);+#8963 = ADVANCED_FACE('',(#8964),#8126,.F.);+#8964 = FACE_BOUND('',#8965,.F.);+#8965 = EDGE_LOOP('',(#8966,#8967,#8968,#8989));+#8966 = ORIENTED_EDGE('',*,*,#8940,.F.);+#8967 = ORIENTED_EDGE('',*,*,#8105,.T.);+#8968 = ORIENTED_EDGE('',*,*,#8969,.T.);+#8969 = EDGE_CURVE('',#8078,#8477,#8970,.T.);+#8970 = SURFACE_CURVE('',#8971,(#8975,#8982),.PCURVE_S1.);+#8971 = LINE('',#8972,#8973);+#8972 = CARTESIAN_POINT('',(-4.537145669057,-2.36,0.240004029399));+#8973 = VECTOR('',#8974,1.);+#8974 = DIRECTION('',(-0.,-1.,-0.));+#8975 = PCURVE('',#8126,#8976);+#8976 = DEFINITIONAL_REPRESENTATION('',(#8977),#8981);+#8977 = LINE('',#8978,#8979);+#8978 = CARTESIAN_POINT('',(2.094336944003,0.18));+#8979 = VECTOR('',#8980,1.);+#8980 = DIRECTION('',(-0.,-1.));+#8981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8982 = PCURVE('',#8093,#8983);+#8983 = DEFINITIONAL_REPRESENTATION('',(#8984),#8988);+#8984 = LINE('',#8985,#8986);+#8985 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#8986 = VECTOR('',#8987,1.);+#8987 = DIRECTION('',(0.,-1.));+#8988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8989 = ORIENTED_EDGE('',*,*,#8499,.F.);+#8990 = ADVANCED_FACE('',(#8991),#8093,.T.);+#8991 = FACE_BOUND('',#8992,.F.);+#8992 = EDGE_LOOP('',(#8993,#8994,#8995,#8996));+#8993 = ORIENTED_EDGE('',*,*,#8725,.F.);+#8994 = ORIENTED_EDGE('',*,*,#8476,.T.);+#8995 = ORIENTED_EDGE('',*,*,#8969,.F.);+#8996 = ORIENTED_EDGE('',*,*,#8077,.F.);+#8997 = MANIFOLD_SOLID_BREP('',#8998);+#8998 = CLOSED_SHELL('',(#8999,#9121,#9197,#9547,#9596,#9874,#9901,#9928+ ,#9955,#9982,#10009,#10036,#10063,#10090,#10117,#10144));+#8999 = ADVANCED_FACE('',(#9000),#9014,.T.);+#9000 = FACE_BOUND('',#9001,.T.);+#9001 = EDGE_LOOP('',(#9002,#9037,#9066,#9094));+#9002 = ORIENTED_EDGE('',*,*,#9003,.F.);+#9003 = EDGE_CURVE('',#9004,#9006,#9008,.T.);+#9004 = VERTEX_POINT('',#9005);+#9005 = CARTESIAN_POINT('',(-3.4975,-3.99,1.3));+#9006 = VERTEX_POINT('',#9007);+#9007 = CARTESIAN_POINT('',(-3.4975,-3.63,1.3));+#9008 = SURFACE_CURVE('',#9009,(#9013,#9025),.PCURVE_S1.);+#9009 = LINE('',#9010,#9011);+#9010 = CARTESIAN_POINT('',(-3.4975,-3.99,1.3));+#9011 = VECTOR('',#9012,1.);+#9012 = DIRECTION('',(0.,1.,0.));+#9013 = PCURVE('',#9014,#9019);+#9014 = CYLINDRICAL_SURFACE('',#9015,0.1);+#9015 = AXIS2_PLACEMENT_3D('',#9016,#9017,#9018);+#9016 = CARTESIAN_POINT('',(-3.4975,-3.81,1.2));+#9017 = DIRECTION('',(0.,1.,0.));+#9018 = DIRECTION('',(-1.,-0.,-0.));+#9019 = DEFINITIONAL_REPRESENTATION('',(#9020),#9024);+#9020 = LINE('',#9021,#9022);+#9021 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#9022 = VECTOR('',#9023,1.);+#9023 = DIRECTION('',(-0.,1.));+#9024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9025 = PCURVE('',#9026,#9031);+#9026 = PLANE('',#9027);+#9027 = AXIS2_PLACEMENT_3D('',#9028,#9029,#9030);+#9028 = CARTESIAN_POINT('',(-3.4975,-3.81,1.3));+#9029 = DIRECTION('',(0.,0.,1.));+#9030 = DIRECTION('',(1.,0.,0.));+#9031 = DEFINITIONAL_REPRESENTATION('',(#9032),#9036);+#9032 = LINE('',#9033,#9034);+#9033 = CARTESIAN_POINT('',(0.,-0.18));+#9034 = VECTOR('',#9035,1.);+#9035 = DIRECTION('',(0.,1.));+#9036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9037 = ORIENTED_EDGE('',*,*,#9038,.T.);+#9038 = EDGE_CURVE('',#9004,#9039,#9041,.T.);+#9039 = VERTEX_POINT('',#9040);+#9040 = CARTESIAN_POINT('',(-3.4475,-3.99,1.286602540378));+#9041 = SURFACE_CURVE('',#9042,(#9047,#9054),.PCURVE_S1.);+#9042 = CIRCLE('',#9043,0.1);+#9043 = AXIS2_PLACEMENT_3D('',#9044,#9045,#9046);+#9044 = CARTESIAN_POINT('',(-3.4975,-3.99,1.2));+#9045 = DIRECTION('',(0.,1.,-0.));+#9046 = DIRECTION('',(-1.,0.,0.));+#9047 = PCURVE('',#9014,#9048);+#9048 = DEFINITIONAL_REPRESENTATION('',(#9049),#9053);+#9049 = LINE('',#9050,#9051);+#9050 = CARTESIAN_POINT('',(0.,-0.18));+#9051 = VECTOR('',#9052,1.);+#9052 = DIRECTION('',(1.,0.));+#9053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9054 = PCURVE('',#9055,#9060);+#9055 = PLANE('',#9056);+#9056 = AXIS2_PLACEMENT_3D('',#9057,#9058,#9059);+#9057 = CARTESIAN_POINT('',(-4.408401242914,-3.99,0.524461625949));+#9058 = DIRECTION('',(0.,1.,0.));+#9059 = DIRECTION('',(0.,0.,-1.));+#9060 = DEFINITIONAL_REPRESENTATION('',(#9061),#9065);+#9061 = CIRCLE('',#9062,0.1);+#9062 = AXIS2_PLACEMENT_2D('',#9063,#9064);+#9063 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#9064 = DIRECTION('',(0.,1.));+#9065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9066 = ORIENTED_EDGE('',*,*,#9067,.T.);+#9067 = EDGE_CURVE('',#9039,#9068,#9070,.T.);+#9068 = VERTEX_POINT('',#9069);+#9069 = CARTESIAN_POINT('',(-3.4475,-3.63,1.286602540378));+#9070 = SURFACE_CURVE('',#9071,(#9075,#9082),.PCURVE_S1.);+#9071 = LINE('',#9072,#9073);+#9072 = CARTESIAN_POINT('',(-3.4475,-3.81,1.286602540378));+#9073 = VECTOR('',#9074,1.);+#9074 = DIRECTION('',(0.,1.,0.));+#9075 = PCURVE('',#9014,#9076);+#9076 = DEFINITIONAL_REPRESENTATION('',(#9077),#9081);+#9077 = LINE('',#9078,#9079);+#9078 = CARTESIAN_POINT('',(2.094395102393,0.));+#9079 = VECTOR('',#9080,1.);+#9080 = DIRECTION('',(0.,1.));+#9081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9082 = PCURVE('',#9083,#9088);+#9083 = PLANE('',#9084);+#9084 = AXIS2_PLACEMENT_3D('',#9085,#9086,#9087);+#9085 = CARTESIAN_POINT('',(-3.4475,-4.49,-0.5));+#9086 = DIRECTION('',(-1.,0.,0.));+#9087 = DIRECTION('',(0.,0.,-1.));+#9088 = DEFINITIONAL_REPRESENTATION('',(#9089),#9093);+#9089 = LINE('',#9090,#9091);+#9090 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#9091 = VECTOR('',#9092,1.);+#9092 = DIRECTION('',(0.,-1.));+#9093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9094 = ORIENTED_EDGE('',*,*,#9095,.F.);+#9095 = EDGE_CURVE('',#9006,#9068,#9096,.T.);+#9096 = SURFACE_CURVE('',#9097,(#9102,#9109),.PCURVE_S1.);+#9097 = CIRCLE('',#9098,0.1);+#9098 = AXIS2_PLACEMENT_3D('',#9099,#9100,#9101);+#9099 = CARTESIAN_POINT('',(-3.4975,-3.63,1.2));+#9100 = DIRECTION('',(0.,1.,-0.));+#9101 = DIRECTION('',(-1.,0.,0.));+#9102 = PCURVE('',#9014,#9103);+#9103 = DEFINITIONAL_REPRESENTATION('',(#9104),#9108);+#9104 = LINE('',#9105,#9106);+#9105 = CARTESIAN_POINT('',(-0.,0.18));+#9106 = VECTOR('',#9107,1.);+#9107 = DIRECTION('',(1.,-0.));+#9108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9109 = PCURVE('',#9110,#9115);+#9110 = PLANE('',#9111);+#9111 = AXIS2_PLACEMENT_3D('',#9112,#9113,#9114);+#9112 = CARTESIAN_POINT('',(-4.408401242914,-3.63,0.524461625949));+#9113 = DIRECTION('',(0.,1.,0.));+#9114 = DIRECTION('',(0.,0.,-1.));+#9115 = DEFINITIONAL_REPRESENTATION('',(#9116),#9120);+#9116 = CIRCLE('',#9117,0.1);+#9117 = AXIS2_PLACEMENT_2D('',#9118,#9119);+#9118 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#9119 = DIRECTION('',(0.,1.));+#9120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9121 = ADVANCED_FACE('',(#9122),#9026,.T.);+#9122 = FACE_BOUND('',#9123,.F.);+#9123 = EDGE_LOOP('',(#9124,#9125,#9148,#9176));+#9124 = ORIENTED_EDGE('',*,*,#9003,.F.);+#9125 = ORIENTED_EDGE('',*,*,#9126,.T.);+#9126 = EDGE_CURVE('',#9004,#9127,#9129,.T.);+#9127 = VERTEX_POINT('',#9128);+#9128 = CARTESIAN_POINT('',(-3.763569972422,-3.99,1.3));+#9129 = SURFACE_CURVE('',#9130,(#9134,#9141),.PCURVE_S1.);+#9130 = LINE('',#9131,#9132);+#9131 = CARTESIAN_POINT('',(-3.4975,-3.99,1.3));+#9132 = VECTOR('',#9133,1.);+#9133 = DIRECTION('',(-1.,-0.,-0.));+#9134 = PCURVE('',#9026,#9135);+#9135 = DEFINITIONAL_REPRESENTATION('',(#9136),#9140);+#9136 = LINE('',#9137,#9138);+#9137 = CARTESIAN_POINT('',(0.,-0.18));+#9138 = VECTOR('',#9139,1.);+#9139 = DIRECTION('',(-1.,0.));+#9140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9141 = PCURVE('',#9055,#9142);+#9142 = DEFINITIONAL_REPRESENTATION('',(#9143),#9147);+#9143 = LINE('',#9144,#9145);+#9144 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#9145 = VECTOR('',#9146,1.);+#9146 = DIRECTION('',(-0.,1.));+#9147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9148 = ORIENTED_EDGE('',*,*,#9149,.T.);+#9149 = EDGE_CURVE('',#9127,#9150,#9152,.T.);+#9150 = VERTEX_POINT('',#9151);+#9151 = CARTESIAN_POINT('',(-3.763569972422,-3.63,1.3));+#9152 = SURFACE_CURVE('',#9153,(#9157,#9164),.PCURVE_S1.);+#9153 = LINE('',#9154,#9155);+#9154 = CARTESIAN_POINT('',(-3.763569972422,-3.99,1.3));+#9155 = VECTOR('',#9156,1.);+#9156 = DIRECTION('',(0.,1.,0.));+#9157 = PCURVE('',#9026,#9158);+#9158 = DEFINITIONAL_REPRESENTATION('',(#9159),#9163);+#9159 = LINE('',#9160,#9161);+#9160 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#9161 = VECTOR('',#9162,1.);+#9162 = DIRECTION('',(0.,1.));+#9163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9164 = PCURVE('',#9165,#9170);+#9165 = CYLINDRICAL_SURFACE('',#9166,0.28);+#9166 = AXIS2_PLACEMENT_3D('',#9167,#9168,#9169);+#9167 = CARTESIAN_POINT('',(-3.763569972422,-3.81,1.02));+#9168 = DIRECTION('',(0.,1.,0.));+#9169 = DIRECTION('',(0.,0.,1.));+#9170 = DEFINITIONAL_REPRESENTATION('',(#9171),#9175);+#9171 = LINE('',#9172,#9173);+#9172 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#9173 = VECTOR('',#9174,1.);+#9174 = DIRECTION('',(0.,1.));+#9175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9176 = ORIENTED_EDGE('',*,*,#9177,.F.);+#9177 = EDGE_CURVE('',#9006,#9150,#9178,.T.);+#9178 = SURFACE_CURVE('',#9179,(#9183,#9190),.PCURVE_S1.);+#9179 = LINE('',#9180,#9181);+#9180 = CARTESIAN_POINT('',(-3.4975,-3.63,1.3));+#9181 = VECTOR('',#9182,1.);+#9182 = DIRECTION('',(-1.,-0.,-0.));+#9183 = PCURVE('',#9026,#9184);+#9184 = DEFINITIONAL_REPRESENTATION('',(#9185),#9189);+#9185 = LINE('',#9186,#9187);+#9186 = CARTESIAN_POINT('',(0.,0.18));+#9187 = VECTOR('',#9188,1.);+#9188 = DIRECTION('',(-1.,0.));+#9189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9190 = PCURVE('',#9110,#9191);+#9191 = DEFINITIONAL_REPRESENTATION('',(#9192),#9196);+#9192 = LINE('',#9193,#9194);+#9193 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#9194 = VECTOR('',#9195,1.);+#9195 = DIRECTION('',(-0.,1.));+#9196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9197 = ADVANCED_FACE('',(#9198),#9110,.T.);+#9198 = FACE_BOUND('',#9199,.F.);+#9199 = EDGE_LOOP('',(#9200,#9201,#9202,#9230,#9258,#9291,#9319,#9347,+ #9375,#9408,#9436,#9469,#9497,#9526));+#9200 = ORIENTED_EDGE('',*,*,#9095,.F.);+#9201 = ORIENTED_EDGE('',*,*,#9177,.T.);+#9202 = ORIENTED_EDGE('',*,*,#9203,.T.);+#9203 = EDGE_CURVE('',#9150,#9204,#9206,.T.);+#9204 = VERTEX_POINT('',#9205);+#9205 = CARTESIAN_POINT('',(-4.006065227246,-3.63,1.159985897103));+#9206 = SURFACE_CURVE('',#9207,(#9212,#9223),.PCURVE_S1.);+#9207 = CIRCLE('',#9208,0.28);+#9208 = AXIS2_PLACEMENT_3D('',#9209,#9210,#9211);+#9209 = CARTESIAN_POINT('',(-3.763569972422,-3.63,1.02));+#9210 = DIRECTION('',(0.,-1.,0.));+#9211 = DIRECTION('',(0.,0.,1.));+#9212 = PCURVE('',#9110,#9213);+#9213 = DEFINITIONAL_REPRESENTATION('',(#9214),#9222);+#9214 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9215,#9216,#9217,#9218,+#9219,#9220,#9221),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9215 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#9216 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#9217 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#9218 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#9219 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#9220 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#9221 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#9222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9223 = PCURVE('',#9165,#9224);+#9224 = DEFINITIONAL_REPRESENTATION('',(#9225),#9229);+#9225 = LINE('',#9226,#9227);+#9226 = CARTESIAN_POINT('',(6.28318530718,0.18));+#9227 = VECTOR('',#9228,1.);+#9228 = DIRECTION('',(-1.,-0.));+#9229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9230 = ORIENTED_EDGE('',*,*,#9231,.T.);+#9231 = EDGE_CURVE('',#9204,#9232,#9234,.T.);+#9232 = VERTEX_POINT('',#9233);+#9233 = CARTESIAN_POINT('',(-4.537145669057,-3.63,0.240004029399));+#9234 = SURFACE_CURVE('',#9235,(#9239,#9246),.PCURVE_S1.);+#9235 = LINE('',#9236,#9237);+#9236 = CARTESIAN_POINT('',(-3.954105448151,-3.63,1.249994963251));+#9237 = VECTOR('',#9238,1.);+#9238 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#9239 = PCURVE('',#9110,#9240);+#9240 = DEFINITIONAL_REPRESENTATION('',(#9241),#9245);+#9241 = LINE('',#9242,#9243);+#9242 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#9243 = VECTOR('',#9244,1.);+#9244 = DIRECTION('',(0.866054481515,0.499949632511));+#9245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9246 = PCURVE('',#9247,#9252);+#9247 = PLANE('',#9248);+#9248 = AXIS2_PLACEMENT_3D('',#9249,#9250,#9251);+#9249 = CARTESIAN_POINT('',(-4.006065227246,-3.81,1.159985897103));+#9250 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#9251 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#9252 = DEFINITIONAL_REPRESENTATION('',(#9253),#9257);+#9253 = LINE('',#9254,#9255);+#9254 = CARTESIAN_POINT('',(0.103930027578,0.18));+#9255 = VECTOR('',#9256,1.);+#9256 = DIRECTION('',(-1.,0.));+#9257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9258 = ORIENTED_EDGE('',*,*,#9259,.F.);+#9259 = EDGE_CURVE('',#9260,#9232,#9262,.T.);+#9260 = VERTEX_POINT('',#9261);+#9261 = CARTESIAN_POINT('',(-4.606430027578,-3.63,0.2));+#9262 = SURFACE_CURVE('',#9263,(#9268,#9279),.PCURVE_S1.);+#9263 = CIRCLE('',#9264,8.E-02);+#9264 = AXIS2_PLACEMENT_3D('',#9265,#9266,#9267);+#9265 = CARTESIAN_POINT('',(-4.606430027578,-3.63,0.28));+#9266 = DIRECTION('',(0.,-1.,0.));+#9267 = DIRECTION('',(0.,0.,1.));+#9268 = PCURVE('',#9110,#9269);+#9269 = DEFINITIONAL_REPRESENTATION('',(#9270),#9278);+#9270 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9271,#9272,#9273,#9274,+#9275,#9276,#9277),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9271 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#9272 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#9273 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#9274 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#9275 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#9276 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#9277 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#9278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9279 = PCURVE('',#9280,#9285);+#9280 = CYLINDRICAL_SURFACE('',#9281,8.E-02);+#9281 = AXIS2_PLACEMENT_3D('',#9282,#9283,#9284);+#9282 = CARTESIAN_POINT('',(-4.606430027578,-3.81,0.28));+#9283 = DIRECTION('',(0.,1.,0.));+#9284 = DIRECTION('',(0.,0.,1.));+#9285 = DEFINITIONAL_REPRESENTATION('',(#9286),#9290);+#9286 = LINE('',#9287,#9288);+#9287 = CARTESIAN_POINT('',(6.28318530718,0.18));+#9288 = VECTOR('',#9289,1.);+#9289 = DIRECTION('',(-1.,-0.));+#9290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9291 = ORIENTED_EDGE('',*,*,#9292,.T.);+#9292 = EDGE_CURVE('',#9260,#9293,#9295,.T.);+#9293 = VERTEX_POINT('',#9294);+#9294 = CARTESIAN_POINT('',(-5.255,-3.63,0.2));+#9295 = SURFACE_CURVE('',#9296,(#9300,#9307),.PCURVE_S1.);+#9296 = LINE('',#9297,#9298);+#9297 = CARTESIAN_POINT('',(-4.5025,-3.63,0.2));+#9298 = VECTOR('',#9299,1.);+#9299 = DIRECTION('',(-1.,-0.,-0.));+#9300 = PCURVE('',#9110,#9301);+#9301 = DEFINITIONAL_REPRESENTATION('',(#9302),#9306);+#9302 = LINE('',#9303,#9304);+#9303 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#9304 = VECTOR('',#9305,1.);+#9305 = DIRECTION('',(-0.,1.));+#9306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9307 = PCURVE('',#9308,#9313);+#9308 = PLANE('',#9309);+#9309 = AXIS2_PLACEMENT_3D('',#9310,#9311,#9312);+#9310 = CARTESIAN_POINT('',(-4.606430027578,-3.81,0.2));+#9311 = DIRECTION('',(0.,0.,1.));+#9312 = DIRECTION('',(1.,0.,0.));+#9313 = DEFINITIONAL_REPRESENTATION('',(#9314),#9318);+#9314 = LINE('',#9315,#9316);+#9315 = CARTESIAN_POINT('',(0.103930027578,0.18));+#9316 = VECTOR('',#9317,1.);+#9317 = DIRECTION('',(-1.,0.));+#9318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9319 = ORIENTED_EDGE('',*,*,#9320,.T.);+#9320 = EDGE_CURVE('',#9293,#9321,#9323,.T.);+#9321 = VERTEX_POINT('',#9322);+#9322 = CARTESIAN_POINT('',(-5.255,-3.63,0.));+#9323 = SURFACE_CURVE('',#9324,(#9328,#9335),.PCURVE_S1.);+#9324 = LINE('',#9325,#9326);+#9325 = CARTESIAN_POINT('',(-5.255,-3.63,1.223081297441E-02));+#9326 = VECTOR('',#9327,1.);+#9327 = DIRECTION('',(-0.,-0.,-1.));+#9328 = PCURVE('',#9110,#9329);+#9329 = DEFINITIONAL_REPRESENTATION('',(#9330),#9334);+#9330 = LINE('',#9331,#9332);+#9331 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#9332 = VECTOR('',#9333,1.);+#9333 = DIRECTION('',(1.,0.));+#9334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9335 = PCURVE('',#9336,#9341);+#9336 = PLANE('',#9337);+#9337 = AXIS2_PLACEMENT_3D('',#9338,#9339,#9340);+#9338 = CARTESIAN_POINT('',(-5.255,-4.49,-0.5));+#9339 = DIRECTION('',(-1.,0.,0.));+#9340 = DIRECTION('',(0.,0.,-1.));+#9341 = DEFINITIONAL_REPRESENTATION('',(#9342),#9346);+#9342 = LINE('',#9343,#9344);+#9343 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#9344 = VECTOR('',#9345,1.);+#9345 = DIRECTION('',(1.,0.));+#9346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9347 = ORIENTED_EDGE('',*,*,#9348,.F.);+#9348 = EDGE_CURVE('',#9349,#9321,#9351,.T.);+#9349 = VERTEX_POINT('',#9350);+#9350 = CARTESIAN_POINT('',(-4.606430027578,-3.63,-5.551115123126E-17));+#9351 = SURFACE_CURVE('',#9352,(#9356,#9363),.PCURVE_S1.);+#9352 = LINE('',#9353,#9354);+#9353 = CARTESIAN_POINT('',(-4.5025,-3.63,0.));+#9354 = VECTOR('',#9355,1.);+#9355 = DIRECTION('',(-1.,-0.,-0.));+#9356 = PCURVE('',#9110,#9357);+#9357 = DEFINITIONAL_REPRESENTATION('',(#9358),#9362);+#9358 = LINE('',#9359,#9360);+#9359 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#9360 = VECTOR('',#9361,1.);+#9361 = DIRECTION('',(-0.,1.));+#9362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9363 = PCURVE('',#9364,#9369);+#9364 = PLANE('',#9365);+#9365 = AXIS2_PLACEMENT_3D('',#9366,#9367,#9368);+#9366 = CARTESIAN_POINT('',(-4.606430027578,-3.81,0.));+#9367 = DIRECTION('',(0.,0.,1.));+#9368 = DIRECTION('',(1.,0.,0.));+#9369 = DEFINITIONAL_REPRESENTATION('',(#9370),#9374);+#9370 = LINE('',#9371,#9372);+#9371 = CARTESIAN_POINT('',(0.103930027578,0.18));+#9372 = VECTOR('',#9373,1.);+#9373 = DIRECTION('',(-1.,0.));+#9374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9375 = ORIENTED_EDGE('',*,*,#9376,.T.);+#9376 = EDGE_CURVE('',#9349,#9377,#9379,.T.);+#9377 = VERTEX_POINT('',#9378);+#9378 = CARTESIAN_POINT('',(-4.363934772754,-3.63,0.140014102897));+#9379 = SURFACE_CURVE('',#9380,(#9385,#9396),.PCURVE_S1.);+#9380 = CIRCLE('',#9381,0.28);+#9381 = AXIS2_PLACEMENT_3D('',#9382,#9383,#9384);+#9382 = CARTESIAN_POINT('',(-4.606430027578,-3.63,0.28));+#9383 = DIRECTION('',(0.,-1.,0.));+#9384 = DIRECTION('',(0.,0.,1.));+#9385 = PCURVE('',#9110,#9386);+#9386 = DEFINITIONAL_REPRESENTATION('',(#9387),#9395);+#9387 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9388,#9389,#9390,#9391,+#9392,#9393,#9394),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9388 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#9389 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#9390 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#9391 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#9392 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#9393 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#9394 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#9395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9396 = PCURVE('',#9397,#9402);+#9397 = CYLINDRICAL_SURFACE('',#9398,0.28);+#9398 = AXIS2_PLACEMENT_3D('',#9399,#9400,#9401);+#9399 = CARTESIAN_POINT('',(-4.606430027578,-3.81,0.28));+#9400 = DIRECTION('',(0.,1.,0.));+#9401 = DIRECTION('',(0.,0.,1.));+#9402 = DEFINITIONAL_REPRESENTATION('',(#9403),#9407);+#9403 = LINE('',#9404,#9405);+#9404 = CARTESIAN_POINT('',(6.28318530718,0.18));+#9405 = VECTOR('',#9406,1.);+#9406 = DIRECTION('',(-1.,-0.));+#9407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9408 = ORIENTED_EDGE('',*,*,#9409,.F.);+#9409 = EDGE_CURVE('',#9410,#9377,#9412,.T.);+#9410 = VERTEX_POINT('',#9411);+#9411 = CARTESIAN_POINT('',(-3.832854330943,-3.63,1.059995970601));+#9412 = SURFACE_CURVE('',#9413,(#9417,#9424),.PCURVE_S1.);+#9413 = LINE('',#9414,#9415);+#9414 = CARTESIAN_POINT('',(-3.780894551849,-3.63,1.150005036749));+#9415 = VECTOR('',#9416,1.);+#9416 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#9417 = PCURVE('',#9110,#9418);+#9418 = DEFINITIONAL_REPRESENTATION('',(#9419),#9423);+#9419 = LINE('',#9420,#9421);+#9420 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#9421 = VECTOR('',#9422,1.);+#9422 = DIRECTION('',(0.866054481515,0.499949632511));+#9423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9424 = PCURVE('',#9425,#9430);+#9425 = PLANE('',#9426);+#9426 = AXIS2_PLACEMENT_3D('',#9427,#9428,#9429);+#9427 = CARTESIAN_POINT('',(-3.832854330943,-3.81,1.059995970601));+#9428 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#9429 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#9430 = DEFINITIONAL_REPRESENTATION('',(#9431),#9435);+#9431 = LINE('',#9432,#9433);+#9432 = CARTESIAN_POINT('',(0.103930027578,0.18));+#9433 = VECTOR('',#9434,1.);+#9434 = DIRECTION('',(-1.,0.));+#9435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9436 = ORIENTED_EDGE('',*,*,#9437,.F.);+#9437 = EDGE_CURVE('',#9438,#9410,#9440,.T.);+#9438 = VERTEX_POINT('',#9439);+#9439 = CARTESIAN_POINT('',(-3.763569972422,-3.63,1.1));+#9440 = SURFACE_CURVE('',#9441,(#9446,#9457),.PCURVE_S1.);+#9441 = CIRCLE('',#9442,8.E-02);+#9442 = AXIS2_PLACEMENT_3D('',#9443,#9444,#9445);+#9443 = CARTESIAN_POINT('',(-3.763569972422,-3.63,1.02));+#9444 = DIRECTION('',(0.,-1.,0.));+#9445 = DIRECTION('',(0.,0.,1.));+#9446 = PCURVE('',#9110,#9447);+#9447 = DEFINITIONAL_REPRESENTATION('',(#9448),#9456);+#9448 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9449,#9450,#9451,#9452,+#9453,#9454,#9455),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9449 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#9450 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#9451 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#9452 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#9453 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#9454 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#9455 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#9456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9457 = PCURVE('',#9458,#9463);+#9458 = CYLINDRICAL_SURFACE('',#9459,8.E-02);+#9459 = AXIS2_PLACEMENT_3D('',#9460,#9461,#9462);+#9460 = CARTESIAN_POINT('',(-3.763569972422,-3.81,1.02));+#9461 = DIRECTION('',(0.,1.,0.));+#9462 = DIRECTION('',(0.,0.,1.));+#9463 = DEFINITIONAL_REPRESENTATION('',(#9464),#9468);+#9464 = LINE('',#9465,#9466);+#9465 = CARTESIAN_POINT('',(6.28318530718,0.18));+#9466 = VECTOR('',#9467,1.);+#9467 = DIRECTION('',(-1.,-0.));+#9468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9469 = ORIENTED_EDGE('',*,*,#9470,.F.);+#9470 = EDGE_CURVE('',#9471,#9438,#9473,.T.);+#9471 = VERTEX_POINT('',#9472);+#9472 = CARTESIAN_POINT('',(-3.4975,-3.63,1.1));+#9473 = SURFACE_CURVE('',#9474,(#9478,#9485),.PCURVE_S1.);+#9474 = LINE('',#9475,#9476);+#9475 = CARTESIAN_POINT('',(-3.4975,-3.63,1.1));+#9476 = VECTOR('',#9477,1.);+#9477 = DIRECTION('',(-1.,-0.,-0.));+#9478 = PCURVE('',#9110,#9479);+#9479 = DEFINITIONAL_REPRESENTATION('',(#9480),#9484);+#9480 = LINE('',#9481,#9482);+#9481 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#9482 = VECTOR('',#9483,1.);+#9483 = DIRECTION('',(-0.,1.));+#9484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9485 = PCURVE('',#9486,#9491);+#9486 = PLANE('',#9487);+#9487 = AXIS2_PLACEMENT_3D('',#9488,#9489,#9490);+#9488 = CARTESIAN_POINT('',(-3.4975,-3.81,1.1));+#9489 = DIRECTION('',(0.,0.,1.));+#9490 = DIRECTION('',(1.,0.,0.));+#9491 = DEFINITIONAL_REPRESENTATION('',(#9492),#9496);+#9492 = LINE('',#9493,#9494);+#9493 = CARTESIAN_POINT('',(0.,0.18));+#9494 = VECTOR('',#9495,1.);+#9495 = DIRECTION('',(-1.,0.));+#9496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9497 = ORIENTED_EDGE('',*,*,#9498,.F.);+#9498 = EDGE_CURVE('',#9499,#9471,#9501,.T.);+#9499 = VERTEX_POINT('',#9500);+#9500 = CARTESIAN_POINT('',(-3.4475,-3.63,1.113397459622));+#9501 = SURFACE_CURVE('',#9502,(#9507,#9514),.PCURVE_S1.);+#9502 = CIRCLE('',#9503,0.1);+#9503 = AXIS2_PLACEMENT_3D('',#9504,#9505,#9506);+#9504 = CARTESIAN_POINT('',(-3.4975,-3.63,1.2));+#9505 = DIRECTION('',(0.,1.,-0.));+#9506 = DIRECTION('',(-1.,0.,0.));+#9507 = PCURVE('',#9110,#9508);+#9508 = DEFINITIONAL_REPRESENTATION('',(#9509),#9513);+#9509 = CIRCLE('',#9510,0.1);+#9510 = AXIS2_PLACEMENT_2D('',#9511,#9512);+#9511 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#9512 = DIRECTION('',(0.,1.));+#9513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9514 = PCURVE('',#9515,#9520);+#9515 = CYLINDRICAL_SURFACE('',#9516,0.1);+#9516 = AXIS2_PLACEMENT_3D('',#9517,#9518,#9519);+#9517 = CARTESIAN_POINT('',(-3.4975,-3.81,1.2));+#9518 = DIRECTION('',(0.,1.,0.));+#9519 = DIRECTION('',(-1.,-0.,-0.));+#9520 = DEFINITIONAL_REPRESENTATION('',(#9521),#9525);+#9521 = LINE('',#9522,#9523);+#9522 = CARTESIAN_POINT('',(-0.,0.18));+#9523 = VECTOR('',#9524,1.);+#9524 = DIRECTION('',(1.,-0.));+#9525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9526 = ORIENTED_EDGE('',*,*,#9527,.F.);+#9527 = EDGE_CURVE('',#9068,#9499,#9528,.T.);+#9528 = SURFACE_CURVE('',#9529,(#9533,#9540),.PCURVE_S1.);+#9529 = LINE('',#9530,#9531);+#9530 = CARTESIAN_POINT('',(-3.4475,-3.63,1.223081297441E-02));+#9531 = VECTOR('',#9532,1.);+#9532 = DIRECTION('',(-0.,-0.,-1.));+#9533 = PCURVE('',#9110,#9534);+#9534 = DEFINITIONAL_REPRESENTATION('',(#9535),#9539);+#9535 = LINE('',#9536,#9537);+#9536 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#9537 = VECTOR('',#9538,1.);+#9538 = DIRECTION('',(1.,0.));+#9539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9540 = PCURVE('',#9083,#9541);+#9541 = DEFINITIONAL_REPRESENTATION('',(#9542),#9546);+#9542 = LINE('',#9543,#9544);+#9543 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#9544 = VECTOR('',#9545,1.);+#9545 = DIRECTION('',(1.,0.));+#9546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9547 = ADVANCED_FACE('',(#9548),#9083,.F.);+#9548 = FACE_BOUND('',#9549,.T.);+#9549 = EDGE_LOOP('',(#9550,#9551,#9574,#9595));+#9550 = ORIENTED_EDGE('',*,*,#9067,.F.);+#9551 = ORIENTED_EDGE('',*,*,#9552,.T.);+#9552 = EDGE_CURVE('',#9039,#9553,#9555,.T.);+#9553 = VERTEX_POINT('',#9554);+#9554 = CARTESIAN_POINT('',(-3.4475,-3.99,1.113397459622));+#9555 = SURFACE_CURVE('',#9556,(#9560,#9567),.PCURVE_S1.);+#9556 = LINE('',#9557,#9558);+#9557 = CARTESIAN_POINT('',(-3.4475,-3.99,1.223081297441E-02));+#9558 = VECTOR('',#9559,1.);+#9559 = DIRECTION('',(-0.,-0.,-1.));+#9560 = PCURVE('',#9083,#9561);+#9561 = DEFINITIONAL_REPRESENTATION('',(#9562),#9566);+#9562 = LINE('',#9563,#9564);+#9563 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#9564 = VECTOR('',#9565,1.);+#9565 = DIRECTION('',(1.,0.));+#9566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9567 = PCURVE('',#9055,#9568);+#9568 = DEFINITIONAL_REPRESENTATION('',(#9569),#9573);+#9569 = LINE('',#9570,#9571);+#9570 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#9571 = VECTOR('',#9572,1.);+#9572 = DIRECTION('',(1.,0.));+#9573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9574 = ORIENTED_EDGE('',*,*,#9575,.T.);+#9575 = EDGE_CURVE('',#9553,#9499,#9576,.T.);+#9576 = SURFACE_CURVE('',#9577,(#9581,#9588),.PCURVE_S1.);+#9577 = LINE('',#9578,#9579);+#9578 = CARTESIAN_POINT('',(-3.4475,-3.81,1.113397459622));+#9579 = VECTOR('',#9580,1.);+#9580 = DIRECTION('',(0.,1.,0.));+#9581 = PCURVE('',#9083,#9582);+#9582 = DEFINITIONAL_REPRESENTATION('',(#9583),#9587);+#9583 = LINE('',#9584,#9585);+#9584 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#9585 = VECTOR('',#9586,1.);+#9586 = DIRECTION('',(0.,-1.));+#9587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9588 = PCURVE('',#9515,#9589);+#9589 = DEFINITIONAL_REPRESENTATION('',(#9590),#9594);+#9590 = LINE('',#9591,#9592);+#9591 = CARTESIAN_POINT('',(4.188790204786,0.));+#9592 = VECTOR('',#9593,1.);+#9593 = DIRECTION('',(0.,1.));+#9594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9595 = ORIENTED_EDGE('',*,*,#9527,.F.);+#9596 = ADVANCED_FACE('',(#9597),#9055,.F.);+#9597 = FACE_BOUND('',#9598,.T.);+#9598 = EDGE_LOOP('',(#9599,#9600,#9601,#9629,#9652,#9680,#9703,#9726,+ #9749,#9777,#9800,#9828,#9851,#9873));+#9599 = ORIENTED_EDGE('',*,*,#9038,.F.);+#9600 = ORIENTED_EDGE('',*,*,#9126,.T.);+#9601 = ORIENTED_EDGE('',*,*,#9602,.T.);+#9602 = EDGE_CURVE('',#9127,#9603,#9605,.T.);+#9603 = VERTEX_POINT('',#9604);+#9604 = CARTESIAN_POINT('',(-4.006065227246,-3.99,1.159985897103));+#9605 = SURFACE_CURVE('',#9606,(#9611,#9622),.PCURVE_S1.);+#9606 = CIRCLE('',#9607,0.28);+#9607 = AXIS2_PLACEMENT_3D('',#9608,#9609,#9610);+#9608 = CARTESIAN_POINT('',(-3.763569972422,-3.99,1.02));+#9609 = DIRECTION('',(0.,-1.,0.));+#9610 = DIRECTION('',(0.,0.,1.));+#9611 = PCURVE('',#9055,#9612);+#9612 = DEFINITIONAL_REPRESENTATION('',(#9613),#9621);+#9613 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9614,#9615,#9616,#9617,+#9618,#9619,#9620),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9614 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#9615 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#9616 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#9617 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#9618 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#9619 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#9620 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#9621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9622 = PCURVE('',#9165,#9623);+#9623 = DEFINITIONAL_REPRESENTATION('',(#9624),#9628);+#9624 = LINE('',#9625,#9626);+#9625 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#9626 = VECTOR('',#9627,1.);+#9627 = DIRECTION('',(-1.,0.));+#9628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9629 = ORIENTED_EDGE('',*,*,#9630,.T.);+#9630 = EDGE_CURVE('',#9603,#9631,#9633,.T.);+#9631 = VERTEX_POINT('',#9632);+#9632 = CARTESIAN_POINT('',(-4.537145669057,-3.99,0.240004029399));+#9633 = SURFACE_CURVE('',#9634,(#9638,#9645),.PCURVE_S1.);+#9634 = LINE('',#9635,#9636);+#9635 = CARTESIAN_POINT('',(-3.954105448151,-3.99,1.249994963251));+#9636 = VECTOR('',#9637,1.);+#9637 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#9638 = PCURVE('',#9055,#9639);+#9639 = DEFINITIONAL_REPRESENTATION('',(#9640),#9644);+#9640 = LINE('',#9641,#9642);+#9641 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#9642 = VECTOR('',#9643,1.);+#9643 = DIRECTION('',(0.866054481515,0.499949632511));+#9644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9645 = PCURVE('',#9247,#9646);+#9646 = DEFINITIONAL_REPRESENTATION('',(#9647),#9651);+#9647 = LINE('',#9648,#9649);+#9648 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#9649 = VECTOR('',#9650,1.);+#9650 = DIRECTION('',(-1.,0.));+#9651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9652 = ORIENTED_EDGE('',*,*,#9653,.F.);+#9653 = EDGE_CURVE('',#9654,#9631,#9656,.T.);+#9654 = VERTEX_POINT('',#9655);+#9655 = CARTESIAN_POINT('',(-4.606430027578,-3.99,0.2));+#9656 = SURFACE_CURVE('',#9657,(#9662,#9673),.PCURVE_S1.);+#9657 = CIRCLE('',#9658,8.E-02);+#9658 = AXIS2_PLACEMENT_3D('',#9659,#9660,#9661);+#9659 = CARTESIAN_POINT('',(-4.606430027578,-3.99,0.28));+#9660 = DIRECTION('',(0.,-1.,0.));+#9661 = DIRECTION('',(0.,0.,1.));+#9662 = PCURVE('',#9055,#9663);+#9663 = DEFINITIONAL_REPRESENTATION('',(#9664),#9672);+#9664 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9665,#9666,#9667,#9668,+#9669,#9670,#9671),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9665 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#9666 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#9667 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#9668 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#9669 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#9670 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#9671 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#9672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9673 = PCURVE('',#9280,#9674);+#9674 = DEFINITIONAL_REPRESENTATION('',(#9675),#9679);+#9675 = LINE('',#9676,#9677);+#9676 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#9677 = VECTOR('',#9678,1.);+#9678 = DIRECTION('',(-1.,0.));+#9679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9680 = ORIENTED_EDGE('',*,*,#9681,.T.);+#9681 = EDGE_CURVE('',#9654,#9682,#9684,.T.);+#9682 = VERTEX_POINT('',#9683);+#9683 = CARTESIAN_POINT('',(-5.255,-3.99,0.2));+#9684 = SURFACE_CURVE('',#9685,(#9689,#9696),.PCURVE_S1.);+#9685 = LINE('',#9686,#9687);+#9686 = CARTESIAN_POINT('',(-4.5025,-3.99,0.2));+#9687 = VECTOR('',#9688,1.);+#9688 = DIRECTION('',(-1.,-0.,-0.));+#9689 = PCURVE('',#9055,#9690);+#9690 = DEFINITIONAL_REPRESENTATION('',(#9691),#9695);+#9691 = LINE('',#9692,#9693);+#9692 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#9693 = VECTOR('',#9694,1.);+#9694 = DIRECTION('',(-0.,1.));+#9695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9696 = PCURVE('',#9308,#9697);+#9697 = DEFINITIONAL_REPRESENTATION('',(#9698),#9702);+#9698 = LINE('',#9699,#9700);+#9699 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#9700 = VECTOR('',#9701,1.);+#9701 = DIRECTION('',(-1.,0.));+#9702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9703 = ORIENTED_EDGE('',*,*,#9704,.T.);+#9704 = EDGE_CURVE('',#9682,#9705,#9707,.T.);+#9705 = VERTEX_POINT('',#9706);+#9706 = CARTESIAN_POINT('',(-5.255,-3.99,0.));+#9707 = SURFACE_CURVE('',#9708,(#9712,#9719),.PCURVE_S1.);+#9708 = LINE('',#9709,#9710);+#9709 = CARTESIAN_POINT('',(-5.255,-3.99,1.223081297441E-02));+#9710 = VECTOR('',#9711,1.);+#9711 = DIRECTION('',(-0.,-0.,-1.));+#9712 = PCURVE('',#9055,#9713);+#9713 = DEFINITIONAL_REPRESENTATION('',(#9714),#9718);+#9714 = LINE('',#9715,#9716);+#9715 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#9716 = VECTOR('',#9717,1.);+#9717 = DIRECTION('',(1.,0.));+#9718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9719 = PCURVE('',#9336,#9720);+#9720 = DEFINITIONAL_REPRESENTATION('',(#9721),#9725);+#9721 = LINE('',#9722,#9723);+#9722 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#9723 = VECTOR('',#9724,1.);+#9724 = DIRECTION('',(1.,0.));+#9725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9726 = ORIENTED_EDGE('',*,*,#9727,.F.);+#9727 = EDGE_CURVE('',#9728,#9705,#9730,.T.);+#9728 = VERTEX_POINT('',#9729);+#9729 = CARTESIAN_POINT('',(-4.606430027578,-3.99,-5.551115123126E-17));+#9730 = SURFACE_CURVE('',#9731,(#9735,#9742),.PCURVE_S1.);+#9731 = LINE('',#9732,#9733);+#9732 = CARTESIAN_POINT('',(-4.5025,-3.99,0.));+#9733 = VECTOR('',#9734,1.);+#9734 = DIRECTION('',(-1.,-0.,-0.));+#9735 = PCURVE('',#9055,#9736);+#9736 = DEFINITIONAL_REPRESENTATION('',(#9737),#9741);+#9737 = LINE('',#9738,#9739);+#9738 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#9739 = VECTOR('',#9740,1.);+#9740 = DIRECTION('',(-0.,1.));+#9741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9742 = PCURVE('',#9364,#9743);+#9743 = DEFINITIONAL_REPRESENTATION('',(#9744),#9748);+#9744 = LINE('',#9745,#9746);+#9745 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#9746 = VECTOR('',#9747,1.);+#9747 = DIRECTION('',(-1.,0.));+#9748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9749 = ORIENTED_EDGE('',*,*,#9750,.T.);+#9750 = EDGE_CURVE('',#9728,#9751,#9753,.T.);+#9751 = VERTEX_POINT('',#9752);+#9752 = CARTESIAN_POINT('',(-4.363934772754,-3.99,0.140014102897));+#9753 = SURFACE_CURVE('',#9754,(#9759,#9770),.PCURVE_S1.);+#9754 = CIRCLE('',#9755,0.28);+#9755 = AXIS2_PLACEMENT_3D('',#9756,#9757,#9758);+#9756 = CARTESIAN_POINT('',(-4.606430027578,-3.99,0.28));+#9757 = DIRECTION('',(0.,-1.,0.));+#9758 = DIRECTION('',(0.,0.,1.));+#9759 = PCURVE('',#9055,#9760);+#9760 = DEFINITIONAL_REPRESENTATION('',(#9761),#9769);+#9761 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9762,#9763,#9764,#9765,+#9766,#9767,#9768),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9762 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#9763 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#9764 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#9765 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#9766 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#9767 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#9768 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#9769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9770 = PCURVE('',#9397,#9771);+#9771 = DEFINITIONAL_REPRESENTATION('',(#9772),#9776);+#9772 = LINE('',#9773,#9774);+#9773 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#9774 = VECTOR('',#9775,1.);+#9775 = DIRECTION('',(-1.,0.));+#9776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9777 = ORIENTED_EDGE('',*,*,#9778,.F.);+#9778 = EDGE_CURVE('',#9779,#9751,#9781,.T.);+#9779 = VERTEX_POINT('',#9780);+#9780 = CARTESIAN_POINT('',(-3.832854330943,-3.99,1.059995970601));+#9781 = SURFACE_CURVE('',#9782,(#9786,#9793),.PCURVE_S1.);+#9782 = LINE('',#9783,#9784);+#9783 = CARTESIAN_POINT('',(-3.780894551849,-3.99,1.150005036749));+#9784 = VECTOR('',#9785,1.);+#9785 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#9786 = PCURVE('',#9055,#9787);+#9787 = DEFINITIONAL_REPRESENTATION('',(#9788),#9792);+#9788 = LINE('',#9789,#9790);+#9789 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#9790 = VECTOR('',#9791,1.);+#9791 = DIRECTION('',(0.866054481515,0.499949632511));+#9792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9793 = PCURVE('',#9425,#9794);+#9794 = DEFINITIONAL_REPRESENTATION('',(#9795),#9799);+#9795 = LINE('',#9796,#9797);+#9796 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#9797 = VECTOR('',#9798,1.);+#9798 = DIRECTION('',(-1.,0.));+#9799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9800 = ORIENTED_EDGE('',*,*,#9801,.F.);+#9801 = EDGE_CURVE('',#9802,#9779,#9804,.T.);+#9802 = VERTEX_POINT('',#9803);+#9803 = CARTESIAN_POINT('',(-3.763569972422,-3.99,1.1));+#9804 = SURFACE_CURVE('',#9805,(#9810,#9821),.PCURVE_S1.);+#9805 = CIRCLE('',#9806,8.E-02);+#9806 = AXIS2_PLACEMENT_3D('',#9807,#9808,#9809);+#9807 = CARTESIAN_POINT('',(-3.763569972422,-3.99,1.02));+#9808 = DIRECTION('',(0.,-1.,0.));+#9809 = DIRECTION('',(0.,0.,1.));+#9810 = PCURVE('',#9055,#9811);+#9811 = DEFINITIONAL_REPRESENTATION('',(#9812),#9820);+#9812 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9813,#9814,#9815,#9816,+#9817,#9818,#9819),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9813 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#9814 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#9815 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#9816 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#9817 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#9818 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#9819 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#9820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9821 = PCURVE('',#9458,#9822);+#9822 = DEFINITIONAL_REPRESENTATION('',(#9823),#9827);+#9823 = LINE('',#9824,#9825);+#9824 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#9825 = VECTOR('',#9826,1.);+#9826 = DIRECTION('',(-1.,0.));+#9827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9828 = ORIENTED_EDGE('',*,*,#9829,.F.);+#9829 = EDGE_CURVE('',#9830,#9802,#9832,.T.);+#9830 = VERTEX_POINT('',#9831);+#9831 = CARTESIAN_POINT('',(-3.4975,-3.99,1.1));+#9832 = SURFACE_CURVE('',#9833,(#9837,#9844),.PCURVE_S1.);+#9833 = LINE('',#9834,#9835);+#9834 = CARTESIAN_POINT('',(-3.4975,-3.99,1.1));+#9835 = VECTOR('',#9836,1.);+#9836 = DIRECTION('',(-1.,-0.,-0.));+#9837 = PCURVE('',#9055,#9838);+#9838 = DEFINITIONAL_REPRESENTATION('',(#9839),#9843);+#9839 = LINE('',#9840,#9841);+#9840 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#9841 = VECTOR('',#9842,1.);+#9842 = DIRECTION('',(-0.,1.));+#9843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9844 = PCURVE('',#9486,#9845);+#9845 = DEFINITIONAL_REPRESENTATION('',(#9846),#9850);+#9846 = LINE('',#9847,#9848);+#9847 = CARTESIAN_POINT('',(0.,-0.18));+#9848 = VECTOR('',#9849,1.);+#9849 = DIRECTION('',(-1.,0.));+#9850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9851 = ORIENTED_EDGE('',*,*,#9852,.F.);+#9852 = EDGE_CURVE('',#9553,#9830,#9853,.T.);+#9853 = SURFACE_CURVE('',#9854,(#9859,#9866),.PCURVE_S1.);+#9854 = CIRCLE('',#9855,0.1);+#9855 = AXIS2_PLACEMENT_3D('',#9856,#9857,#9858);+#9856 = CARTESIAN_POINT('',(-3.4975,-3.99,1.2));+#9857 = DIRECTION('',(0.,1.,-0.));+#9858 = DIRECTION('',(-1.,0.,0.));+#9859 = PCURVE('',#9055,#9860);+#9860 = DEFINITIONAL_REPRESENTATION('',(#9861),#9865);+#9861 = CIRCLE('',#9862,0.1);+#9862 = AXIS2_PLACEMENT_2D('',#9863,#9864);+#9863 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#9864 = DIRECTION('',(0.,1.));+#9865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9866 = PCURVE('',#9515,#9867);+#9867 = DEFINITIONAL_REPRESENTATION('',(#9868),#9872);+#9868 = LINE('',#9869,#9870);+#9869 = CARTESIAN_POINT('',(0.,-0.18));+#9870 = VECTOR('',#9871,1.);+#9871 = DIRECTION('',(1.,0.));+#9872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9873 = ORIENTED_EDGE('',*,*,#9552,.F.);+#9874 = ADVANCED_FACE('',(#9875),#9165,.T.);+#9875 = FACE_BOUND('',#9876,.T.);+#9876 = EDGE_LOOP('',(#9877,#9878,#9899,#9900));+#9877 = ORIENTED_EDGE('',*,*,#9203,.T.);+#9878 = ORIENTED_EDGE('',*,*,#9879,.F.);+#9879 = EDGE_CURVE('',#9603,#9204,#9880,.T.);+#9880 = SURFACE_CURVE('',#9881,(#9885,#9892),.PCURVE_S1.);+#9881 = LINE('',#9882,#9883);+#9882 = CARTESIAN_POINT('',(-4.006065227246,-3.99,1.159985897103));+#9883 = VECTOR('',#9884,1.);+#9884 = DIRECTION('',(0.,1.,0.));+#9885 = PCURVE('',#9165,#9886);+#9886 = DEFINITIONAL_REPRESENTATION('',(#9887),#9891);+#9887 = LINE('',#9888,#9889);+#9888 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#9889 = VECTOR('',#9890,1.);+#9890 = DIRECTION('',(0.,1.));+#9891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9892 = PCURVE('',#9247,#9893);+#9893 = DEFINITIONAL_REPRESENTATION('',(#9894),#9898);+#9894 = LINE('',#9895,#9896);+#9895 = CARTESIAN_POINT('',(0.,-0.18));+#9896 = VECTOR('',#9897,1.);+#9897 = DIRECTION('',(0.,1.));+#9898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9899 = ORIENTED_EDGE('',*,*,#9602,.F.);+#9900 = ORIENTED_EDGE('',*,*,#9149,.T.);+#9901 = ADVANCED_FACE('',(#9902),#9515,.T.);+#9902 = FACE_BOUND('',#9903,.T.);+#9903 = EDGE_LOOP('',(#9904,#9905,#9906,#9927));+#9904 = ORIENTED_EDGE('',*,*,#9575,.F.);+#9905 = ORIENTED_EDGE('',*,*,#9852,.T.);+#9906 = ORIENTED_EDGE('',*,*,#9907,.F.);+#9907 = EDGE_CURVE('',#9471,#9830,#9908,.T.);+#9908 = SURFACE_CURVE('',#9909,(#9913,#9920),.PCURVE_S1.);+#9909 = LINE('',#9910,#9911);+#9910 = CARTESIAN_POINT('',(-3.4975,-3.63,1.1));+#9911 = VECTOR('',#9912,1.);+#9912 = DIRECTION('',(-0.,-1.,-0.));+#9913 = PCURVE('',#9515,#9914);+#9914 = DEFINITIONAL_REPRESENTATION('',(#9915),#9919);+#9915 = LINE('',#9916,#9917);+#9916 = CARTESIAN_POINT('',(4.712388980385,0.18));+#9917 = VECTOR('',#9918,1.);+#9918 = DIRECTION('',(0.,-1.));+#9919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9920 = PCURVE('',#9486,#9921);+#9921 = DEFINITIONAL_REPRESENTATION('',(#9922),#9926);+#9922 = LINE('',#9923,#9924);+#9923 = CARTESIAN_POINT('',(0.,0.18));+#9924 = VECTOR('',#9925,1.);+#9925 = DIRECTION('',(0.,-1.));+#9926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9927 = ORIENTED_EDGE('',*,*,#9498,.F.);+#9928 = ADVANCED_FACE('',(#9929),#9486,.F.);+#9929 = FACE_BOUND('',#9930,.T.);+#9930 = EDGE_LOOP('',(#9931,#9932,#9953,#9954));+#9931 = ORIENTED_EDGE('',*,*,#9829,.T.);+#9932 = ORIENTED_EDGE('',*,*,#9933,.F.);+#9933 = EDGE_CURVE('',#9438,#9802,#9934,.T.);+#9934 = SURFACE_CURVE('',#9935,(#9939,#9946),.PCURVE_S1.);+#9935 = LINE('',#9936,#9937);+#9936 = CARTESIAN_POINT('',(-3.763569972422,-3.63,1.1));+#9937 = VECTOR('',#9938,1.);+#9938 = DIRECTION('',(-0.,-1.,-0.));+#9939 = PCURVE('',#9486,#9940);+#9940 = DEFINITIONAL_REPRESENTATION('',(#9941),#9945);+#9941 = LINE('',#9942,#9943);+#9942 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#9943 = VECTOR('',#9944,1.);+#9944 = DIRECTION('',(0.,-1.));+#9945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9946 = PCURVE('',#9458,#9947);+#9947 = DEFINITIONAL_REPRESENTATION('',(#9948),#9952);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(6.28318530718,0.18));+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(-0.,-1.));+#9952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9953 = ORIENTED_EDGE('',*,*,#9470,.F.);+#9954 = ORIENTED_EDGE('',*,*,#9907,.T.);+#9955 = ADVANCED_FACE('',(#9956),#9458,.F.);+#9956 = FACE_BOUND('',#9957,.F.);+#9957 = EDGE_LOOP('',(#9958,#9959,#9960,#9981));+#9958 = ORIENTED_EDGE('',*,*,#9933,.F.);+#9959 = ORIENTED_EDGE('',*,*,#9437,.T.);+#9960 = ORIENTED_EDGE('',*,*,#9961,.T.);+#9961 = EDGE_CURVE('',#9410,#9779,#9962,.T.);+#9962 = SURFACE_CURVE('',#9963,(#9967,#9974),.PCURVE_S1.);+#9963 = LINE('',#9964,#9965);+#9964 = CARTESIAN_POINT('',(-3.832854330943,-3.63,1.059995970601));+#9965 = VECTOR('',#9966,1.);+#9966 = DIRECTION('',(-0.,-1.,-0.));+#9967 = PCURVE('',#9458,#9968);+#9968 = DEFINITIONAL_REPRESENTATION('',(#9969),#9973);+#9969 = LINE('',#9970,#9971);+#9970 = CARTESIAN_POINT('',(5.235929597593,0.18));+#9971 = VECTOR('',#9972,1.);+#9972 = DIRECTION('',(-0.,-1.));+#9973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9974 = PCURVE('',#9425,#9975);+#9975 = DEFINITIONAL_REPRESENTATION('',(#9976),#9980);+#9976 = LINE('',#9977,#9978);+#9977 = CARTESIAN_POINT('',(0.,0.18));+#9978 = VECTOR('',#9979,1.);+#9979 = DIRECTION('',(0.,-1.));+#9980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9981 = ORIENTED_EDGE('',*,*,#9801,.F.);+#9982 = ADVANCED_FACE('',(#9983),#9425,.F.);+#9983 = FACE_BOUND('',#9984,.T.);+#9984 = EDGE_LOOP('',(#9985,#9986,#10007,#10008));+#9985 = ORIENTED_EDGE('',*,*,#9778,.T.);+#9986 = ORIENTED_EDGE('',*,*,#9987,.F.);+#9987 = EDGE_CURVE('',#9377,#9751,#9988,.T.);+#9988 = SURFACE_CURVE('',#9989,(#9993,#10000),.PCURVE_S1.);+#9989 = LINE('',#9990,#9991);+#9990 = CARTESIAN_POINT('',(-4.363934772754,-3.63,0.140014102897));+#9991 = VECTOR('',#9992,1.);+#9992 = DIRECTION('',(-0.,-1.,-0.));+#9993 = PCURVE('',#9425,#9994);+#9994 = DEFINITIONAL_REPRESENTATION('',(#9995),#9999);+#9995 = LINE('',#9996,#9997);+#9996 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#9997 = VECTOR('',#9998,1.);+#9998 = DIRECTION('',(0.,-1.));+#9999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10000 = PCURVE('',#9397,#10001);+#10001 = DEFINITIONAL_REPRESENTATION('',(#10002),#10006);+#10002 = LINE('',#10003,#10004);+#10003 = CARTESIAN_POINT('',(2.094336944003,0.18));+#10004 = VECTOR('',#10005,1.);+#10005 = DIRECTION('',(-0.,-1.));+#10006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10007 = ORIENTED_EDGE('',*,*,#9409,.F.);+#10008 = ORIENTED_EDGE('',*,*,#9961,.T.);+#10009 = ADVANCED_FACE('',(#10010),#9397,.T.);+#10010 = FACE_BOUND('',#10011,.T.);+#10011 = EDGE_LOOP('',(#10012,#10033,#10034,#10035));+#10012 = ORIENTED_EDGE('',*,*,#10013,.F.);+#10013 = EDGE_CURVE('',#9349,#9728,#10014,.T.);+#10014 = SURFACE_CURVE('',#10015,(#10019,#10026),.PCURVE_S1.);+#10015 = LINE('',#10016,#10017);+#10016 = CARTESIAN_POINT('',(-4.606430027578,-3.63,-5.551115123126E-17)+ );+#10017 = VECTOR('',#10018,1.);+#10018 = DIRECTION('',(-0.,-1.,-0.));+#10019 = PCURVE('',#9397,#10020);+#10020 = DEFINITIONAL_REPRESENTATION('',(#10021),#10025);+#10021 = LINE('',#10022,#10023);+#10022 = CARTESIAN_POINT('',(3.14159265359,0.18));+#10023 = VECTOR('',#10024,1.);+#10024 = DIRECTION('',(-0.,-1.));+#10025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10026 = PCURVE('',#9364,#10027);+#10027 = DEFINITIONAL_REPRESENTATION('',(#10028),#10032);+#10028 = LINE('',#10029,#10030);+#10029 = CARTESIAN_POINT('',(0.,0.18));+#10030 = VECTOR('',#10031,1.);+#10031 = DIRECTION('',(0.,-1.));+#10032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10033 = ORIENTED_EDGE('',*,*,#9376,.T.);+#10034 = ORIENTED_EDGE('',*,*,#9987,.T.);+#10035 = ORIENTED_EDGE('',*,*,#9750,.F.);+#10036 = ADVANCED_FACE('',(#10037),#9364,.F.);+#10037 = FACE_BOUND('',#10038,.T.);+#10038 = EDGE_LOOP('',(#10039,#10040,#10041,#10062));+#10039 = ORIENTED_EDGE('',*,*,#10013,.T.);+#10040 = ORIENTED_EDGE('',*,*,#9727,.T.);+#10041 = ORIENTED_EDGE('',*,*,#10042,.T.);+#10042 = EDGE_CURVE('',#9705,#9321,#10043,.T.);+#10043 = SURFACE_CURVE('',#10044,(#10048,#10055),.PCURVE_S1.);+#10044 = LINE('',#10045,#10046);+#10045 = CARTESIAN_POINT('',(-5.255,-4.15,0.));+#10046 = VECTOR('',#10047,1.);+#10047 = DIRECTION('',(0.,1.,0.));+#10048 = PCURVE('',#9364,#10049);+#10049 = DEFINITIONAL_REPRESENTATION('',(#10050),#10054);+#10050 = LINE('',#10051,#10052);+#10051 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#10052 = VECTOR('',#10053,1.);+#10053 = DIRECTION('',(0.,1.));+#10054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10055 = PCURVE('',#9336,#10056);+#10056 = DEFINITIONAL_REPRESENTATION('',(#10057),#10061);+#10057 = LINE('',#10058,#10059);+#10058 = CARTESIAN_POINT('',(-0.5,-0.34));+#10059 = VECTOR('',#10060,1.);+#10060 = DIRECTION('',(0.,-1.));+#10061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10062 = ORIENTED_EDGE('',*,*,#9348,.F.);+#10063 = ADVANCED_FACE('',(#10064),#9336,.T.);+#10064 = FACE_BOUND('',#10065,.F.);+#10065 = EDGE_LOOP('',(#10066,#10087,#10088,#10089));+#10066 = ORIENTED_EDGE('',*,*,#10067,.F.);+#10067 = EDGE_CURVE('',#9682,#9293,#10068,.T.);+#10068 = SURFACE_CURVE('',#10069,(#10073,#10080),.PCURVE_S1.);+#10069 = LINE('',#10070,#10071);+#10070 = CARTESIAN_POINT('',(-5.255,-4.15,0.2));+#10071 = VECTOR('',#10072,1.);+#10072 = DIRECTION('',(0.,1.,0.));+#10073 = PCURVE('',#9336,#10074);+#10074 = DEFINITIONAL_REPRESENTATION('',(#10075),#10079);+#10075 = LINE('',#10076,#10077);+#10076 = CARTESIAN_POINT('',(-0.7,-0.34));+#10077 = VECTOR('',#10078,1.);+#10078 = DIRECTION('',(0.,-1.));+#10079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10080 = PCURVE('',#9308,#10081);+#10081 = DEFINITIONAL_REPRESENTATION('',(#10082),#10086);+#10082 = LINE('',#10083,#10084);+#10083 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#10084 = VECTOR('',#10085,1.);+#10085 = DIRECTION('',(0.,1.));+#10086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10087 = ORIENTED_EDGE('',*,*,#9704,.T.);+#10088 = ORIENTED_EDGE('',*,*,#10042,.T.);+#10089 = ORIENTED_EDGE('',*,*,#9320,.F.);+#10090 = ADVANCED_FACE('',(#10091),#9308,.T.);+#10091 = FACE_BOUND('',#10092,.F.);+#10092 = EDGE_LOOP('',(#10093,#10114,#10115,#10116));+#10093 = ORIENTED_EDGE('',*,*,#10094,.T.);+#10094 = EDGE_CURVE('',#9260,#9654,#10095,.T.);+#10095 = SURFACE_CURVE('',#10096,(#10100,#10107),.PCURVE_S1.);+#10096 = LINE('',#10097,#10098);+#10097 = CARTESIAN_POINT('',(-4.606430027578,-3.63,0.2));+#10098 = VECTOR('',#10099,1.);+#10099 = DIRECTION('',(-0.,-1.,-0.));+#10100 = PCURVE('',#9308,#10101);+#10101 = DEFINITIONAL_REPRESENTATION('',(#10102),#10106);+#10102 = LINE('',#10103,#10104);+#10103 = CARTESIAN_POINT('',(0.,0.18));+#10104 = VECTOR('',#10105,1.);+#10105 = DIRECTION('',(0.,-1.));+#10106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10107 = PCURVE('',#9280,#10108);+#10108 = DEFINITIONAL_REPRESENTATION('',(#10109),#10113);+#10109 = LINE('',#10110,#10111);+#10110 = CARTESIAN_POINT('',(3.14159265359,0.18));+#10111 = VECTOR('',#10112,1.);+#10112 = DIRECTION('',(-0.,-1.));+#10113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10114 = ORIENTED_EDGE('',*,*,#9681,.T.);+#10115 = ORIENTED_EDGE('',*,*,#10067,.T.);+#10116 = ORIENTED_EDGE('',*,*,#9292,.F.);+#10117 = ADVANCED_FACE('',(#10118),#9280,.F.);+#10118 = FACE_BOUND('',#10119,.F.);+#10119 = EDGE_LOOP('',(#10120,#10121,#10122,#10143));+#10120 = ORIENTED_EDGE('',*,*,#10094,.F.);+#10121 = ORIENTED_EDGE('',*,*,#9259,.T.);+#10122 = ORIENTED_EDGE('',*,*,#10123,.T.);+#10123 = EDGE_CURVE('',#9232,#9631,#10124,.T.);+#10124 = SURFACE_CURVE('',#10125,(#10129,#10136),.PCURVE_S1.);+#10125 = LINE('',#10126,#10127);+#10126 = CARTESIAN_POINT('',(-4.537145669057,-3.63,0.240004029399));+#10127 = VECTOR('',#10128,1.);+#10128 = DIRECTION('',(-0.,-1.,-0.));+#10129 = PCURVE('',#9280,#10130);+#10130 = DEFINITIONAL_REPRESENTATION('',(#10131),#10135);+#10131 = LINE('',#10132,#10133);+#10132 = CARTESIAN_POINT('',(2.094336944003,0.18));+#10133 = VECTOR('',#10134,1.);+#10134 = DIRECTION('',(-0.,-1.));+#10135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10136 = PCURVE('',#9247,#10137);+#10137 = DEFINITIONAL_REPRESENTATION('',(#10138),#10142);+#10138 = LINE('',#10139,#10140);+#10139 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#10140 = VECTOR('',#10141,1.);+#10141 = DIRECTION('',(0.,-1.));+#10142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10143 = ORIENTED_EDGE('',*,*,#9653,.F.);+#10144 = ADVANCED_FACE('',(#10145),#9247,.T.);+#10145 = FACE_BOUND('',#10146,.F.);+#10146 = EDGE_LOOP('',(#10147,#10148,#10149,#10150));+#10147 = ORIENTED_EDGE('',*,*,#9879,.F.);+#10148 = ORIENTED_EDGE('',*,*,#9630,.T.);+#10149 = ORIENTED_EDGE('',*,*,#10123,.F.);+#10150 = ORIENTED_EDGE('',*,*,#9231,.F.);+#10151 = MANIFOLD_SOLID_BREP('',#10152);+#10152 = CLOSED_SHELL('',(#10153,#10275,#10351,#10701,#10750,#11028,+ #11055,#11082,#11109,#11136,#11163,#11190,#11217,#11244,#11271,+ #11298));+#10153 = ADVANCED_FACE('',(#10154),#10168,.T.);+#10154 = FACE_BOUND('',#10155,.T.);+#10155 = EDGE_LOOP('',(#10156,#10191,#10220,#10248));+#10156 = ORIENTED_EDGE('',*,*,#10157,.F.);+#10157 = EDGE_CURVE('',#10158,#10160,#10162,.T.);+#10158 = VERTEX_POINT('',#10159);+#10159 = CARTESIAN_POINT('',(-3.4975,-5.26,1.3));+#10160 = VERTEX_POINT('',#10161);+#10161 = CARTESIAN_POINT('',(-3.4975,-4.9,1.3));+#10162 = SURFACE_CURVE('',#10163,(#10167,#10179),.PCURVE_S1.);+#10163 = LINE('',#10164,#10165);+#10164 = CARTESIAN_POINT('',(-3.4975,-5.26,1.3));+#10165 = VECTOR('',#10166,1.);+#10166 = DIRECTION('',(0.,1.,0.));+#10167 = PCURVE('',#10168,#10173);+#10168 = CYLINDRICAL_SURFACE('',#10169,0.1);+#10169 = AXIS2_PLACEMENT_3D('',#10170,#10171,#10172);+#10170 = CARTESIAN_POINT('',(-3.4975,-5.08,1.2));+#10171 = DIRECTION('',(0.,1.,0.));+#10172 = DIRECTION('',(-1.,-0.,-0.));+#10173 = DEFINITIONAL_REPRESENTATION('',(#10174),#10178);+#10174 = LINE('',#10175,#10176);+#10175 = CARTESIAN_POINT('',(1.570796326795,-0.18));+#10176 = VECTOR('',#10177,1.);+#10177 = DIRECTION('',(-0.,1.));+#10178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10179 = PCURVE('',#10180,#10185);+#10180 = PLANE('',#10181);+#10181 = AXIS2_PLACEMENT_3D('',#10182,#10183,#10184);+#10182 = CARTESIAN_POINT('',(-3.4975,-5.08,1.3));+#10183 = DIRECTION('',(0.,0.,1.));+#10184 = DIRECTION('',(1.,0.,0.));+#10185 = DEFINITIONAL_REPRESENTATION('',(#10186),#10190);+#10186 = LINE('',#10187,#10188);+#10187 = CARTESIAN_POINT('',(0.,-0.18));+#10188 = VECTOR('',#10189,1.);+#10189 = DIRECTION('',(0.,1.));+#10190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10191 = ORIENTED_EDGE('',*,*,#10192,.T.);+#10192 = EDGE_CURVE('',#10158,#10193,#10195,.T.);+#10193 = VERTEX_POINT('',#10194);+#10194 = CARTESIAN_POINT('',(-3.4475,-5.26,1.286602540378));+#10195 = SURFACE_CURVE('',#10196,(#10201,#10208),.PCURVE_S1.);+#10196 = CIRCLE('',#10197,0.1);+#10197 = AXIS2_PLACEMENT_3D('',#10198,#10199,#10200);+#10198 = CARTESIAN_POINT('',(-3.4975,-5.26,1.2));+#10199 = DIRECTION('',(0.,1.,-0.));+#10200 = DIRECTION('',(-1.,0.,0.));+#10201 = PCURVE('',#10168,#10202);+#10202 = DEFINITIONAL_REPRESENTATION('',(#10203),#10207);+#10203 = LINE('',#10204,#10205);+#10204 = CARTESIAN_POINT('',(0.,-0.18));+#10205 = VECTOR('',#10206,1.);+#10206 = DIRECTION('',(1.,0.));+#10207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10208 = PCURVE('',#10209,#10214);+#10209 = PLANE('',#10210);+#10210 = AXIS2_PLACEMENT_3D('',#10211,#10212,#10213);+#10211 = CARTESIAN_POINT('',(-4.408401242914,-5.26,0.524461625949));+#10212 = DIRECTION('',(0.,1.,0.));+#10213 = DIRECTION('',(0.,0.,-1.));+#10214 = DEFINITIONAL_REPRESENTATION('',(#10215),#10219);+#10215 = CIRCLE('',#10216,0.1);+#10216 = AXIS2_PLACEMENT_2D('',#10217,#10218);+#10217 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#10218 = DIRECTION('',(0.,1.));+#10219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10220 = ORIENTED_EDGE('',*,*,#10221,.T.);+#10221 = EDGE_CURVE('',#10193,#10222,#10224,.T.);+#10222 = VERTEX_POINT('',#10223);+#10223 = CARTESIAN_POINT('',(-3.4475,-4.9,1.286602540378));+#10224 = SURFACE_CURVE('',#10225,(#10229,#10236),.PCURVE_S1.);+#10225 = LINE('',#10226,#10227);+#10226 = CARTESIAN_POINT('',(-3.4475,-5.08,1.286602540378));+#10227 = VECTOR('',#10228,1.);+#10228 = DIRECTION('',(0.,1.,0.));+#10229 = PCURVE('',#10168,#10230);+#10230 = DEFINITIONAL_REPRESENTATION('',(#10231),#10235);+#10231 = LINE('',#10232,#10233);+#10232 = CARTESIAN_POINT('',(2.094395102393,0.));+#10233 = VECTOR('',#10234,1.);+#10234 = DIRECTION('',(0.,1.));+#10235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10236 = PCURVE('',#10237,#10242);+#10237 = PLANE('',#10238);+#10238 = AXIS2_PLACEMENT_3D('',#10239,#10240,#10241);+#10239 = CARTESIAN_POINT('',(-3.4475,-5.76,-0.5));+#10240 = DIRECTION('',(-1.,0.,0.));+#10241 = DIRECTION('',(0.,0.,-1.));+#10242 = DEFINITIONAL_REPRESENTATION('',(#10243),#10247);+#10243 = LINE('',#10244,#10245);+#10244 = CARTESIAN_POINT('',(-1.786602540378,-0.68));+#10245 = VECTOR('',#10246,1.);+#10246 = DIRECTION('',(0.,-1.));+#10247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10248 = ORIENTED_EDGE('',*,*,#10249,.F.);+#10249 = EDGE_CURVE('',#10160,#10222,#10250,.T.);+#10250 = SURFACE_CURVE('',#10251,(#10256,#10263),.PCURVE_S1.);+#10251 = CIRCLE('',#10252,0.1);+#10252 = AXIS2_PLACEMENT_3D('',#10253,#10254,#10255);+#10253 = CARTESIAN_POINT('',(-3.4975,-4.9,1.2));+#10254 = DIRECTION('',(0.,1.,-0.));+#10255 = DIRECTION('',(-1.,0.,0.));+#10256 = PCURVE('',#10168,#10257);+#10257 = DEFINITIONAL_REPRESENTATION('',(#10258),#10262);+#10258 = LINE('',#10259,#10260);+#10259 = CARTESIAN_POINT('',(-0.,0.18));+#10260 = VECTOR('',#10261,1.);+#10261 = DIRECTION('',(1.,-0.));+#10262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10263 = PCURVE('',#10264,#10269);+#10264 = PLANE('',#10265);+#10265 = AXIS2_PLACEMENT_3D('',#10266,#10267,#10268);+#10266 = CARTESIAN_POINT('',(-4.408401242914,-4.9,0.524461625949));+#10267 = DIRECTION('',(0.,1.,0.));+#10268 = DIRECTION('',(0.,0.,-1.));+#10269 = DEFINITIONAL_REPRESENTATION('',(#10270),#10274);+#10270 = CIRCLE('',#10271,0.1);+#10271 = AXIS2_PLACEMENT_2D('',#10272,#10273);+#10272 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#10273 = DIRECTION('',(0.,1.));+#10274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10275 = ADVANCED_FACE('',(#10276),#10180,.T.);+#10276 = FACE_BOUND('',#10277,.F.);+#10277 = EDGE_LOOP('',(#10278,#10279,#10302,#10330));+#10278 = ORIENTED_EDGE('',*,*,#10157,.F.);+#10279 = ORIENTED_EDGE('',*,*,#10280,.T.);+#10280 = EDGE_CURVE('',#10158,#10281,#10283,.T.);+#10281 = VERTEX_POINT('',#10282);+#10282 = CARTESIAN_POINT('',(-3.763569972422,-5.26,1.3));+#10283 = SURFACE_CURVE('',#10284,(#10288,#10295),.PCURVE_S1.);+#10284 = LINE('',#10285,#10286);+#10285 = CARTESIAN_POINT('',(-3.4975,-5.26,1.3));+#10286 = VECTOR('',#10287,1.);+#10287 = DIRECTION('',(-1.,-0.,-0.));+#10288 = PCURVE('',#10180,#10289);+#10289 = DEFINITIONAL_REPRESENTATION('',(#10290),#10294);+#10290 = LINE('',#10291,#10292);+#10291 = CARTESIAN_POINT('',(0.,-0.18));+#10292 = VECTOR('',#10293,1.);+#10293 = DIRECTION('',(-1.,0.));+#10294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10295 = PCURVE('',#10209,#10296);+#10296 = DEFINITIONAL_REPRESENTATION('',(#10297),#10301);+#10297 = LINE('',#10298,#10299);+#10298 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#10299 = VECTOR('',#10300,1.);+#10300 = DIRECTION('',(-0.,1.));+#10301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10302 = ORIENTED_EDGE('',*,*,#10303,.T.);+#10303 = EDGE_CURVE('',#10281,#10304,#10306,.T.);+#10304 = VERTEX_POINT('',#10305);+#10305 = CARTESIAN_POINT('',(-3.763569972422,-4.9,1.3));+#10306 = SURFACE_CURVE('',#10307,(#10311,#10318),.PCURVE_S1.);+#10307 = LINE('',#10308,#10309);+#10308 = CARTESIAN_POINT('',(-3.763569972422,-5.26,1.3));+#10309 = VECTOR('',#10310,1.);+#10310 = DIRECTION('',(0.,1.,0.));+#10311 = PCURVE('',#10180,#10312);+#10312 = DEFINITIONAL_REPRESENTATION('',(#10313),#10317);+#10313 = LINE('',#10314,#10315);+#10314 = CARTESIAN_POINT('',(-0.266069972422,-0.18));+#10315 = VECTOR('',#10316,1.);+#10316 = DIRECTION('',(0.,1.));+#10317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10318 = PCURVE('',#10319,#10324);+#10319 = CYLINDRICAL_SURFACE('',#10320,0.28);+#10320 = AXIS2_PLACEMENT_3D('',#10321,#10322,#10323);+#10321 = CARTESIAN_POINT('',(-3.763569972422,-5.08,1.02));+#10322 = DIRECTION('',(0.,1.,0.));+#10323 = DIRECTION('',(0.,0.,1.));+#10324 = DEFINITIONAL_REPRESENTATION('',(#10325),#10329);+#10325 = LINE('',#10326,#10327);+#10326 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#10327 = VECTOR('',#10328,1.);+#10328 = DIRECTION('',(0.,1.));+#10329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10330 = ORIENTED_EDGE('',*,*,#10331,.F.);+#10331 = EDGE_CURVE('',#10160,#10304,#10332,.T.);+#10332 = SURFACE_CURVE('',#10333,(#10337,#10344),.PCURVE_S1.);+#10333 = LINE('',#10334,#10335);+#10334 = CARTESIAN_POINT('',(-3.4975,-4.9,1.3));+#10335 = VECTOR('',#10336,1.);+#10336 = DIRECTION('',(-1.,-0.,-0.));+#10337 = PCURVE('',#10180,#10338);+#10338 = DEFINITIONAL_REPRESENTATION('',(#10339),#10343);+#10339 = LINE('',#10340,#10341);+#10340 = CARTESIAN_POINT('',(0.,0.18));+#10341 = VECTOR('',#10342,1.);+#10342 = DIRECTION('',(-1.,0.));+#10343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10344 = PCURVE('',#10264,#10345);+#10345 = DEFINITIONAL_REPRESENTATION('',(#10346),#10350);+#10346 = LINE('',#10347,#10348);+#10347 = CARTESIAN_POINT('',(-0.775538374051,-0.910901242914));+#10348 = VECTOR('',#10349,1.);+#10349 = DIRECTION('',(-0.,1.));+#10350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10351 = ADVANCED_FACE('',(#10352),#10264,.T.);+#10352 = FACE_BOUND('',#10353,.F.);+#10353 = EDGE_LOOP('',(#10354,#10355,#10356,#10384,#10412,#10445,#10473,+ #10501,#10529,#10562,#10590,#10623,#10651,#10680));+#10354 = ORIENTED_EDGE('',*,*,#10249,.F.);+#10355 = ORIENTED_EDGE('',*,*,#10331,.T.);+#10356 = ORIENTED_EDGE('',*,*,#10357,.T.);+#10357 = EDGE_CURVE('',#10304,#10358,#10360,.T.);+#10358 = VERTEX_POINT('',#10359);+#10359 = CARTESIAN_POINT('',(-4.006065227246,-4.9,1.159985897103));+#10360 = SURFACE_CURVE('',#10361,(#10366,#10377),.PCURVE_S1.);+#10361 = CIRCLE('',#10362,0.28);+#10362 = AXIS2_PLACEMENT_3D('',#10363,#10364,#10365);+#10363 = CARTESIAN_POINT('',(-3.763569972422,-4.9,1.02));+#10364 = DIRECTION('',(0.,-1.,0.));+#10365 = DIRECTION('',(0.,0.,1.));+#10366 = PCURVE('',#10264,#10367);+#10367 = DEFINITIONAL_REPRESENTATION('',(#10368),#10376);+#10368 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10369,#10370,#10371,#10372+ ,#10373,#10374,#10375),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10369 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#10370 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#10371 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#10372 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#10373 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#10374 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#10375 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#10376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10377 = PCURVE('',#10319,#10378);+#10378 = DEFINITIONAL_REPRESENTATION('',(#10379),#10383);+#10379 = LINE('',#10380,#10381);+#10380 = CARTESIAN_POINT('',(6.28318530718,0.18));+#10381 = VECTOR('',#10382,1.);+#10382 = DIRECTION('',(-1.,-0.));+#10383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10384 = ORIENTED_EDGE('',*,*,#10385,.T.);+#10385 = EDGE_CURVE('',#10358,#10386,#10388,.T.);+#10386 = VERTEX_POINT('',#10387);+#10387 = CARTESIAN_POINT('',(-4.537145669057,-4.9,0.240004029399));+#10388 = SURFACE_CURVE('',#10389,(#10393,#10400),.PCURVE_S1.);+#10389 = LINE('',#10390,#10391);+#10390 = CARTESIAN_POINT('',(-3.954105448151,-4.9,1.249994963251));+#10391 = VECTOR('',#10392,1.);+#10392 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#10393 = PCURVE('',#10264,#10394);+#10394 = DEFINITIONAL_REPRESENTATION('',(#10395),#10399);+#10395 = LINE('',#10396,#10397);+#10396 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#10397 = VECTOR('',#10398,1.);+#10398 = DIRECTION('',(0.866054481515,0.499949632511));+#10399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10400 = PCURVE('',#10401,#10406);+#10401 = PLANE('',#10402);+#10402 = AXIS2_PLACEMENT_3D('',#10403,#10404,#10405);+#10403 = CARTESIAN_POINT('',(-4.006065227246,-5.08,1.159985897103));+#10404 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#10405 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#10406 = DEFINITIONAL_REPRESENTATION('',(#10407),#10411);+#10407 = LINE('',#10408,#10409);+#10408 = CARTESIAN_POINT('',(0.103930027578,0.18));+#10409 = VECTOR('',#10410,1.);+#10410 = DIRECTION('',(-1.,0.));+#10411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10412 = ORIENTED_EDGE('',*,*,#10413,.F.);+#10413 = EDGE_CURVE('',#10414,#10386,#10416,.T.);+#10414 = VERTEX_POINT('',#10415);+#10415 = CARTESIAN_POINT('',(-4.606430027578,-4.9,0.2));+#10416 = SURFACE_CURVE('',#10417,(#10422,#10433),.PCURVE_S1.);+#10417 = CIRCLE('',#10418,8.E-02);+#10418 = AXIS2_PLACEMENT_3D('',#10419,#10420,#10421);+#10419 = CARTESIAN_POINT('',(-4.606430027578,-4.9,0.28));+#10420 = DIRECTION('',(0.,-1.,0.));+#10421 = DIRECTION('',(0.,0.,1.));+#10422 = PCURVE('',#10264,#10423);+#10423 = DEFINITIONAL_REPRESENTATION('',(#10424),#10432);+#10424 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10425,#10426,#10427,#10428+ ,#10429,#10430,#10431),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10425 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#10426 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#10427 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#10428 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#10429 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#10430 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#10431 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#10432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10433 = PCURVE('',#10434,#10439);+#10434 = CYLINDRICAL_SURFACE('',#10435,8.E-02);+#10435 = AXIS2_PLACEMENT_3D('',#10436,#10437,#10438);+#10436 = CARTESIAN_POINT('',(-4.606430027578,-5.08,0.28));+#10437 = DIRECTION('',(0.,1.,0.));+#10438 = DIRECTION('',(0.,0.,1.));+#10439 = DEFINITIONAL_REPRESENTATION('',(#10440),#10444);+#10440 = LINE('',#10441,#10442);+#10441 = CARTESIAN_POINT('',(6.28318530718,0.18));+#10442 = VECTOR('',#10443,1.);+#10443 = DIRECTION('',(-1.,-0.));+#10444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10445 = ORIENTED_EDGE('',*,*,#10446,.T.);+#10446 = EDGE_CURVE('',#10414,#10447,#10449,.T.);+#10447 = VERTEX_POINT('',#10448);+#10448 = CARTESIAN_POINT('',(-5.255,-4.9,0.2));+#10449 = SURFACE_CURVE('',#10450,(#10454,#10461),.PCURVE_S1.);+#10450 = LINE('',#10451,#10452);+#10451 = CARTESIAN_POINT('',(-4.5025,-4.9,0.2));+#10452 = VECTOR('',#10453,1.);+#10453 = DIRECTION('',(-1.,-0.,-0.));+#10454 = PCURVE('',#10264,#10455);+#10455 = DEFINITIONAL_REPRESENTATION('',(#10456),#10460);+#10456 = LINE('',#10457,#10458);+#10457 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#10458 = VECTOR('',#10459,1.);+#10459 = DIRECTION('',(-0.,1.));+#10460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10461 = PCURVE('',#10462,#10467);+#10462 = PLANE('',#10463);+#10463 = AXIS2_PLACEMENT_3D('',#10464,#10465,#10466);+#10464 = CARTESIAN_POINT('',(-4.606430027578,-5.08,0.2));+#10465 = DIRECTION('',(0.,0.,1.));+#10466 = DIRECTION('',(1.,0.,0.));+#10467 = DEFINITIONAL_REPRESENTATION('',(#10468),#10472);+#10468 = LINE('',#10469,#10470);+#10469 = CARTESIAN_POINT('',(0.103930027578,0.18));+#10470 = VECTOR('',#10471,1.);+#10471 = DIRECTION('',(-1.,0.));+#10472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10473 = ORIENTED_EDGE('',*,*,#10474,.T.);+#10474 = EDGE_CURVE('',#10447,#10475,#10477,.T.);+#10475 = VERTEX_POINT('',#10476);+#10476 = CARTESIAN_POINT('',(-5.255,-4.9,0.));+#10477 = SURFACE_CURVE('',#10478,(#10482,#10489),.PCURVE_S1.);+#10478 = LINE('',#10479,#10480);+#10479 = CARTESIAN_POINT('',(-5.255,-4.9,1.223081297441E-02));+#10480 = VECTOR('',#10481,1.);+#10481 = DIRECTION('',(-0.,-0.,-1.));+#10482 = PCURVE('',#10264,#10483);+#10483 = DEFINITIONAL_REPRESENTATION('',(#10484),#10488);+#10484 = LINE('',#10485,#10486);+#10485 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#10486 = VECTOR('',#10487,1.);+#10487 = DIRECTION('',(1.,0.));+#10488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10489 = PCURVE('',#10490,#10495);+#10490 = PLANE('',#10491);+#10491 = AXIS2_PLACEMENT_3D('',#10492,#10493,#10494);+#10492 = CARTESIAN_POINT('',(-5.255,-5.76,-0.5));+#10493 = DIRECTION('',(-1.,0.,0.));+#10494 = DIRECTION('',(0.,0.,-1.));+#10495 = DEFINITIONAL_REPRESENTATION('',(#10496),#10500);+#10496 = LINE('',#10497,#10498);+#10497 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#10498 = VECTOR('',#10499,1.);+#10499 = DIRECTION('',(1.,0.));+#10500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10501 = ORIENTED_EDGE('',*,*,#10502,.F.);+#10502 = EDGE_CURVE('',#10503,#10475,#10505,.T.);+#10503 = VERTEX_POINT('',#10504);+#10504 = CARTESIAN_POINT('',(-4.606430027578,-4.9,-5.551115123126E-17));+#10505 = SURFACE_CURVE('',#10506,(#10510,#10517),.PCURVE_S1.);+#10506 = LINE('',#10507,#10508);+#10507 = CARTESIAN_POINT('',(-4.5025,-4.9,0.));+#10508 = VECTOR('',#10509,1.);+#10509 = DIRECTION('',(-1.,-0.,-0.));+#10510 = PCURVE('',#10264,#10511);+#10511 = DEFINITIONAL_REPRESENTATION('',(#10512),#10516);+#10512 = LINE('',#10513,#10514);+#10513 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#10514 = VECTOR('',#10515,1.);+#10515 = DIRECTION('',(-0.,1.));+#10516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10517 = PCURVE('',#10518,#10523);+#10518 = PLANE('',#10519);+#10519 = AXIS2_PLACEMENT_3D('',#10520,#10521,#10522);+#10520 = CARTESIAN_POINT('',(-4.606430027578,-5.08,0.));+#10521 = DIRECTION('',(0.,0.,1.));+#10522 = DIRECTION('',(1.,0.,0.));+#10523 = DEFINITIONAL_REPRESENTATION('',(#10524),#10528);+#10524 = LINE('',#10525,#10526);+#10525 = CARTESIAN_POINT('',(0.103930027578,0.18));+#10526 = VECTOR('',#10527,1.);+#10527 = DIRECTION('',(-1.,0.));+#10528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10529 = ORIENTED_EDGE('',*,*,#10530,.T.);+#10530 = EDGE_CURVE('',#10503,#10531,#10533,.T.);+#10531 = VERTEX_POINT('',#10532);+#10532 = CARTESIAN_POINT('',(-4.363934772754,-4.9,0.140014102897));+#10533 = SURFACE_CURVE('',#10534,(#10539,#10550),.PCURVE_S1.);+#10534 = CIRCLE('',#10535,0.28);+#10535 = AXIS2_PLACEMENT_3D('',#10536,#10537,#10538);+#10536 = CARTESIAN_POINT('',(-4.606430027578,-4.9,0.28));+#10537 = DIRECTION('',(0.,-1.,0.));+#10538 = DIRECTION('',(0.,0.,1.));+#10539 = PCURVE('',#10264,#10540);+#10540 = DEFINITIONAL_REPRESENTATION('',(#10541),#10549);+#10541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10542,#10543,#10544,#10545+ ,#10546,#10547,#10548),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10542 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#10543 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#10544 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#10545 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#10546 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#10547 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#10548 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#10549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10550 = PCURVE('',#10551,#10556);+#10551 = CYLINDRICAL_SURFACE('',#10552,0.28);+#10552 = AXIS2_PLACEMENT_3D('',#10553,#10554,#10555);+#10553 = CARTESIAN_POINT('',(-4.606430027578,-5.08,0.28));+#10554 = DIRECTION('',(0.,1.,0.));+#10555 = DIRECTION('',(0.,0.,1.));+#10556 = DEFINITIONAL_REPRESENTATION('',(#10557),#10561);+#10557 = LINE('',#10558,#10559);+#10558 = CARTESIAN_POINT('',(6.28318530718,0.18));+#10559 = VECTOR('',#10560,1.);+#10560 = DIRECTION('',(-1.,-0.));+#10561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10562 = ORIENTED_EDGE('',*,*,#10563,.F.);+#10563 = EDGE_CURVE('',#10564,#10531,#10566,.T.);+#10564 = VERTEX_POINT('',#10565);+#10565 = CARTESIAN_POINT('',(-3.832854330943,-4.9,1.059995970601));+#10566 = SURFACE_CURVE('',#10567,(#10571,#10578),.PCURVE_S1.);+#10567 = LINE('',#10568,#10569);+#10568 = CARTESIAN_POINT('',(-3.780894551849,-4.9,1.150005036749));+#10569 = VECTOR('',#10570,1.);+#10570 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#10571 = PCURVE('',#10264,#10572);+#10572 = DEFINITIONAL_REPRESENTATION('',(#10573),#10577);+#10573 = LINE('',#10574,#10575);+#10574 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#10575 = VECTOR('',#10576,1.);+#10576 = DIRECTION('',(0.866054481515,0.499949632511));+#10577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10578 = PCURVE('',#10579,#10584);+#10579 = PLANE('',#10580);+#10580 = AXIS2_PLACEMENT_3D('',#10581,#10582,#10583);+#10581 = CARTESIAN_POINT('',(-3.832854330943,-5.08,1.059995970601));+#10582 = DIRECTION('',(-0.866054481515,0.,0.499949632511));+#10583 = DIRECTION('',(0.499949632511,0.,0.866054481515));+#10584 = DEFINITIONAL_REPRESENTATION('',(#10585),#10589);+#10585 = LINE('',#10586,#10587);+#10586 = CARTESIAN_POINT('',(0.103930027578,0.18));+#10587 = VECTOR('',#10588,1.);+#10588 = DIRECTION('',(-1.,0.));+#10589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10590 = ORIENTED_EDGE('',*,*,#10591,.F.);+#10591 = EDGE_CURVE('',#10592,#10564,#10594,.T.);+#10592 = VERTEX_POINT('',#10593);+#10593 = CARTESIAN_POINT('',(-3.763569972422,-4.9,1.1));+#10594 = SURFACE_CURVE('',#10595,(#10600,#10611),.PCURVE_S1.);+#10595 = CIRCLE('',#10596,8.E-02);+#10596 = AXIS2_PLACEMENT_3D('',#10597,#10598,#10599);+#10597 = CARTESIAN_POINT('',(-3.763569972422,-4.9,1.02));+#10598 = DIRECTION('',(0.,-1.,0.));+#10599 = DIRECTION('',(0.,0.,1.));+#10600 = PCURVE('',#10264,#10601);+#10601 = DEFINITIONAL_REPRESENTATION('',(#10602),#10610);+#10602 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10603,#10604,#10605,#10606+ ,#10607,#10608,#10609),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10603 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#10604 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#10605 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#10606 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#10607 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#10608 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#10609 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#10610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10611 = PCURVE('',#10612,#10617);+#10612 = CYLINDRICAL_SURFACE('',#10613,8.E-02);+#10613 = AXIS2_PLACEMENT_3D('',#10614,#10615,#10616);+#10614 = CARTESIAN_POINT('',(-3.763569972422,-5.08,1.02));+#10615 = DIRECTION('',(0.,1.,0.));+#10616 = DIRECTION('',(0.,0.,1.));+#10617 = DEFINITIONAL_REPRESENTATION('',(#10618),#10622);+#10618 = LINE('',#10619,#10620);+#10619 = CARTESIAN_POINT('',(6.28318530718,0.18));+#10620 = VECTOR('',#10621,1.);+#10621 = DIRECTION('',(-1.,-0.));+#10622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10623 = ORIENTED_EDGE('',*,*,#10624,.F.);+#10624 = EDGE_CURVE('',#10625,#10592,#10627,.T.);+#10625 = VERTEX_POINT('',#10626);+#10626 = CARTESIAN_POINT('',(-3.4975,-4.9,1.1));+#10627 = SURFACE_CURVE('',#10628,(#10632,#10639),.PCURVE_S1.);+#10628 = LINE('',#10629,#10630);+#10629 = CARTESIAN_POINT('',(-3.4975,-4.9,1.1));+#10630 = VECTOR('',#10631,1.);+#10631 = DIRECTION('',(-1.,-0.,-0.));+#10632 = PCURVE('',#10264,#10633);+#10633 = DEFINITIONAL_REPRESENTATION('',(#10634),#10638);+#10634 = LINE('',#10635,#10636);+#10635 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#10636 = VECTOR('',#10637,1.);+#10637 = DIRECTION('',(-0.,1.));+#10638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10639 = PCURVE('',#10640,#10645);+#10640 = PLANE('',#10641);+#10641 = AXIS2_PLACEMENT_3D('',#10642,#10643,#10644);+#10642 = CARTESIAN_POINT('',(-3.4975,-5.08,1.1));+#10643 = DIRECTION('',(0.,0.,1.));+#10644 = DIRECTION('',(1.,0.,0.));+#10645 = DEFINITIONAL_REPRESENTATION('',(#10646),#10650);+#10646 = LINE('',#10647,#10648);+#10647 = CARTESIAN_POINT('',(0.,0.18));+#10648 = VECTOR('',#10649,1.);+#10649 = DIRECTION('',(-1.,0.));+#10650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10651 = ORIENTED_EDGE('',*,*,#10652,.F.);+#10652 = EDGE_CURVE('',#10653,#10625,#10655,.T.);+#10653 = VERTEX_POINT('',#10654);+#10654 = CARTESIAN_POINT('',(-3.4475,-4.9,1.113397459622));+#10655 = SURFACE_CURVE('',#10656,(#10661,#10668),.PCURVE_S1.);+#10656 = CIRCLE('',#10657,0.1);+#10657 = AXIS2_PLACEMENT_3D('',#10658,#10659,#10660);+#10658 = CARTESIAN_POINT('',(-3.4975,-4.9,1.2));+#10659 = DIRECTION('',(0.,1.,-0.));+#10660 = DIRECTION('',(-1.,0.,0.));+#10661 = PCURVE('',#10264,#10662);+#10662 = DEFINITIONAL_REPRESENTATION('',(#10663),#10667);+#10663 = CIRCLE('',#10664,0.1);+#10664 = AXIS2_PLACEMENT_2D('',#10665,#10666);+#10665 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#10666 = DIRECTION('',(0.,1.));+#10667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10668 = PCURVE('',#10669,#10674);+#10669 = CYLINDRICAL_SURFACE('',#10670,0.1);+#10670 = AXIS2_PLACEMENT_3D('',#10671,#10672,#10673);+#10671 = CARTESIAN_POINT('',(-3.4975,-5.08,1.2));+#10672 = DIRECTION('',(0.,1.,0.));+#10673 = DIRECTION('',(-1.,-0.,-0.));+#10674 = DEFINITIONAL_REPRESENTATION('',(#10675),#10679);+#10675 = LINE('',#10676,#10677);+#10676 = CARTESIAN_POINT('',(-0.,0.18));+#10677 = VECTOR('',#10678,1.);+#10678 = DIRECTION('',(1.,-0.));+#10679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10680 = ORIENTED_EDGE('',*,*,#10681,.F.);+#10681 = EDGE_CURVE('',#10222,#10653,#10682,.T.);+#10682 = SURFACE_CURVE('',#10683,(#10687,#10694),.PCURVE_S1.);+#10683 = LINE('',#10684,#10685);+#10684 = CARTESIAN_POINT('',(-3.4475,-4.9,1.223081297441E-02));+#10685 = VECTOR('',#10686,1.);+#10686 = DIRECTION('',(-0.,-0.,-1.));+#10687 = PCURVE('',#10264,#10688);+#10688 = DEFINITIONAL_REPRESENTATION('',(#10689),#10693);+#10689 = LINE('',#10690,#10691);+#10690 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#10691 = VECTOR('',#10692,1.);+#10692 = DIRECTION('',(1.,0.));+#10693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10694 = PCURVE('',#10237,#10695);+#10695 = DEFINITIONAL_REPRESENTATION('',(#10696),#10700);+#10696 = LINE('',#10697,#10698);+#10697 = CARTESIAN_POINT('',(-0.512230812974,-0.86));+#10698 = VECTOR('',#10699,1.);+#10699 = DIRECTION('',(1.,0.));+#10700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10701 = ADVANCED_FACE('',(#10702),#10237,.F.);+#10702 = FACE_BOUND('',#10703,.T.);+#10703 = EDGE_LOOP('',(#10704,#10705,#10728,#10749));+#10704 = ORIENTED_EDGE('',*,*,#10221,.F.);+#10705 = ORIENTED_EDGE('',*,*,#10706,.T.);+#10706 = EDGE_CURVE('',#10193,#10707,#10709,.T.);+#10707 = VERTEX_POINT('',#10708);+#10708 = CARTESIAN_POINT('',(-3.4475,-5.26,1.113397459622));+#10709 = SURFACE_CURVE('',#10710,(#10714,#10721),.PCURVE_S1.);+#10710 = LINE('',#10711,#10712);+#10711 = CARTESIAN_POINT('',(-3.4475,-5.26,1.223081297441E-02));+#10712 = VECTOR('',#10713,1.);+#10713 = DIRECTION('',(-0.,-0.,-1.));+#10714 = PCURVE('',#10237,#10715);+#10715 = DEFINITIONAL_REPRESENTATION('',(#10716),#10720);+#10716 = LINE('',#10717,#10718);+#10717 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#10718 = VECTOR('',#10719,1.);+#10719 = DIRECTION('',(1.,0.));+#10720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10721 = PCURVE('',#10209,#10722);+#10722 = DEFINITIONAL_REPRESENTATION('',(#10723),#10727);+#10723 = LINE('',#10724,#10725);+#10724 = CARTESIAN_POINT('',(0.512230812975,-0.960901242914));+#10725 = VECTOR('',#10726,1.);+#10726 = DIRECTION('',(1.,0.));+#10727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10728 = ORIENTED_EDGE('',*,*,#10729,.T.);+#10729 = EDGE_CURVE('',#10707,#10653,#10730,.T.);+#10730 = SURFACE_CURVE('',#10731,(#10735,#10742),.PCURVE_S1.);+#10731 = LINE('',#10732,#10733);+#10732 = CARTESIAN_POINT('',(-3.4475,-5.08,1.113397459622));+#10733 = VECTOR('',#10734,1.);+#10734 = DIRECTION('',(0.,1.,0.));+#10735 = PCURVE('',#10237,#10736);+#10736 = DEFINITIONAL_REPRESENTATION('',(#10737),#10741);+#10737 = LINE('',#10738,#10739);+#10738 = CARTESIAN_POINT('',(-1.613397459622,-0.68));+#10739 = VECTOR('',#10740,1.);+#10740 = DIRECTION('',(0.,-1.));+#10741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10742 = PCURVE('',#10669,#10743);+#10743 = DEFINITIONAL_REPRESENTATION('',(#10744),#10748);+#10744 = LINE('',#10745,#10746);+#10745 = CARTESIAN_POINT('',(4.188790204786,0.));+#10746 = VECTOR('',#10747,1.);+#10747 = DIRECTION('',(0.,1.));+#10748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10749 = ORIENTED_EDGE('',*,*,#10681,.F.);+#10750 = ADVANCED_FACE('',(#10751),#10209,.F.);+#10751 = FACE_BOUND('',#10752,.T.);+#10752 = EDGE_LOOP('',(#10753,#10754,#10755,#10783,#10806,#10834,#10857,+ #10880,#10903,#10931,#10954,#10982,#11005,#11027));+#10753 = ORIENTED_EDGE('',*,*,#10192,.F.);+#10754 = ORIENTED_EDGE('',*,*,#10280,.T.);+#10755 = ORIENTED_EDGE('',*,*,#10756,.T.);+#10756 = EDGE_CURVE('',#10281,#10757,#10759,.T.);+#10757 = VERTEX_POINT('',#10758);+#10758 = CARTESIAN_POINT('',(-4.006065227246,-5.26,1.159985897103));+#10759 = SURFACE_CURVE('',#10760,(#10765,#10776),.PCURVE_S1.);+#10760 = CIRCLE('',#10761,0.28);+#10761 = AXIS2_PLACEMENT_3D('',#10762,#10763,#10764);+#10762 = CARTESIAN_POINT('',(-3.763569972422,-5.26,1.02));+#10763 = DIRECTION('',(0.,-1.,0.));+#10764 = DIRECTION('',(0.,0.,1.));+#10765 = PCURVE('',#10209,#10766);+#10766 = DEFINITIONAL_REPRESENTATION('',(#10767),#10775);+#10767 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10768,#10769,#10770,#10771+ ,#10772,#10773,#10774),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10768 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#10769 = CARTESIAN_POINT('',(-0.775538374051,-0.159857044373));+#10770 = CARTESIAN_POINT('',(-0.355538374051,-0.402344157432));+#10771 = CARTESIAN_POINT('',(6.4461625949E-02,-0.644831270492));+#10772 = CARTESIAN_POINT('',(-0.355538374051,-0.887318383552));+#10773 = CARTESIAN_POINT('',(-0.775538374051,-1.129805496611));+#10774 = CARTESIAN_POINT('',(-0.775538374051,-0.644831270492));+#10775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10776 = PCURVE('',#10319,#10777);+#10777 = DEFINITIONAL_REPRESENTATION('',(#10778),#10782);+#10778 = LINE('',#10779,#10780);+#10779 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#10780 = VECTOR('',#10781,1.);+#10781 = DIRECTION('',(-1.,0.));+#10782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10783 = ORIENTED_EDGE('',*,*,#10784,.T.);+#10784 = EDGE_CURVE('',#10757,#10785,#10787,.T.);+#10785 = VERTEX_POINT('',#10786);+#10786 = CARTESIAN_POINT('',(-4.537145669057,-5.26,0.240004029399));+#10787 = SURFACE_CURVE('',#10788,(#10792,#10799),.PCURVE_S1.);+#10788 = LINE('',#10789,#10790);+#10789 = CARTESIAN_POINT('',(-3.954105448151,-5.26,1.249994963251));+#10790 = VECTOR('',#10791,1.);+#10791 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#10792 = PCURVE('',#10209,#10793);+#10793 = DEFINITIONAL_REPRESENTATION('',(#10794),#10798);+#10794 = LINE('',#10795,#10796);+#10795 = CARTESIAN_POINT('',(-0.725533337302,-0.454295794763));+#10796 = VECTOR('',#10797,1.);+#10797 = DIRECTION('',(0.866054481515,0.499949632511));+#10798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10799 = PCURVE('',#10401,#10800);+#10800 = DEFINITIONAL_REPRESENTATION('',(#10801),#10805);+#10801 = LINE('',#10802,#10803);+#10802 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#10803 = VECTOR('',#10804,1.);+#10804 = DIRECTION('',(-1.,0.));+#10805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10806 = ORIENTED_EDGE('',*,*,#10807,.F.);+#10807 = EDGE_CURVE('',#10808,#10785,#10810,.T.);+#10808 = VERTEX_POINT('',#10809);+#10809 = CARTESIAN_POINT('',(-4.606430027578,-5.26,0.2));+#10810 = SURFACE_CURVE('',#10811,(#10816,#10827),.PCURVE_S1.);+#10811 = CIRCLE('',#10812,8.E-02);+#10812 = AXIS2_PLACEMENT_3D('',#10813,#10814,#10815);+#10813 = CARTESIAN_POINT('',(-4.606430027578,-5.26,0.28));+#10814 = DIRECTION('',(0.,-1.,0.));+#10815 = DIRECTION('',(0.,0.,1.));+#10816 = PCURVE('',#10209,#10817);+#10817 = DEFINITIONAL_REPRESENTATION('',(#10818),#10826);+#10818 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10819,#10820,#10821,#10822+ ,#10823,#10824,#10825),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10819 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#10820 = CARTESIAN_POINT('',(0.164461625949,0.33659284927));+#10821 = CARTESIAN_POINT('',(0.284461625949,0.267310816967));+#10822 = CARTESIAN_POINT('',(0.404461625949,0.198028784664));+#10823 = CARTESIAN_POINT('',(0.284461625949,0.128746752361));+#10824 = CARTESIAN_POINT('',(0.164461625949,5.946472005849E-02));+#10825 = CARTESIAN_POINT('',(0.164461625949,0.198028784664));+#10826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10827 = PCURVE('',#10434,#10828);+#10828 = DEFINITIONAL_REPRESENTATION('',(#10829),#10833);+#10829 = LINE('',#10830,#10831);+#10830 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#10831 = VECTOR('',#10832,1.);+#10832 = DIRECTION('',(-1.,0.));+#10833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10834 = ORIENTED_EDGE('',*,*,#10835,.T.);+#10835 = EDGE_CURVE('',#10808,#10836,#10838,.T.);+#10836 = VERTEX_POINT('',#10837);+#10837 = CARTESIAN_POINT('',(-5.255,-5.26,0.2));+#10838 = SURFACE_CURVE('',#10839,(#10843,#10850),.PCURVE_S1.);+#10839 = LINE('',#10840,#10841);+#10840 = CARTESIAN_POINT('',(-4.5025,-5.26,0.2));+#10841 = VECTOR('',#10842,1.);+#10842 = DIRECTION('',(-1.,-0.,-0.));+#10843 = PCURVE('',#10209,#10844);+#10844 = DEFINITIONAL_REPRESENTATION('',(#10845),#10849);+#10845 = LINE('',#10846,#10847);+#10846 = CARTESIAN_POINT('',(0.324461625949,9.4098757086E-02));+#10847 = VECTOR('',#10848,1.);+#10848 = DIRECTION('',(-0.,1.));+#10849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10850 = PCURVE('',#10462,#10851);+#10851 = DEFINITIONAL_REPRESENTATION('',(#10852),#10856);+#10852 = LINE('',#10853,#10854);+#10853 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#10854 = VECTOR('',#10855,1.);+#10855 = DIRECTION('',(-1.,0.));+#10856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10857 = ORIENTED_EDGE('',*,*,#10858,.T.);+#10858 = EDGE_CURVE('',#10836,#10859,#10861,.T.);+#10859 = VERTEX_POINT('',#10860);+#10860 = CARTESIAN_POINT('',(-5.255,-5.26,0.));+#10861 = SURFACE_CURVE('',#10862,(#10866,#10873),.PCURVE_S1.);+#10862 = LINE('',#10863,#10864);+#10863 = CARTESIAN_POINT('',(-5.255,-5.26,1.223081297441E-02));+#10864 = VECTOR('',#10865,1.);+#10865 = DIRECTION('',(-0.,-0.,-1.));+#10866 = PCURVE('',#10209,#10867);+#10867 = DEFINITIONAL_REPRESENTATION('',(#10868),#10872);+#10868 = LINE('',#10869,#10870);+#10869 = CARTESIAN_POINT('',(0.512230812975,0.846598757086));+#10870 = VECTOR('',#10871,1.);+#10871 = DIRECTION('',(1.,0.));+#10872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10873 = PCURVE('',#10490,#10874);+#10874 = DEFINITIONAL_REPRESENTATION('',(#10875),#10879);+#10875 = LINE('',#10876,#10877);+#10876 = CARTESIAN_POINT('',(-0.512230812974,-0.5));+#10877 = VECTOR('',#10878,1.);+#10878 = DIRECTION('',(1.,0.));+#10879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10880 = ORIENTED_EDGE('',*,*,#10881,.F.);+#10881 = EDGE_CURVE('',#10882,#10859,#10884,.T.);+#10882 = VERTEX_POINT('',#10883);+#10883 = CARTESIAN_POINT('',(-4.606430027578,-5.26,-5.551115123126E-17)+ );+#10884 = SURFACE_CURVE('',#10885,(#10889,#10896),.PCURVE_S1.);+#10885 = LINE('',#10886,#10887);+#10886 = CARTESIAN_POINT('',(-4.5025,-5.26,0.));+#10887 = VECTOR('',#10888,1.);+#10888 = DIRECTION('',(-1.,-0.,-0.));+#10889 = PCURVE('',#10209,#10890);+#10890 = DEFINITIONAL_REPRESENTATION('',(#10891),#10895);+#10891 = LINE('',#10892,#10893);+#10892 = CARTESIAN_POINT('',(0.524461625949,9.4098757086E-02));+#10893 = VECTOR('',#10894,1.);+#10894 = DIRECTION('',(-0.,1.));+#10895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10896 = PCURVE('',#10518,#10897);+#10897 = DEFINITIONAL_REPRESENTATION('',(#10898),#10902);+#10898 = LINE('',#10899,#10900);+#10899 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#10900 = VECTOR('',#10901,1.);+#10901 = DIRECTION('',(-1.,0.));+#10902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10903 = ORIENTED_EDGE('',*,*,#10904,.T.);+#10904 = EDGE_CURVE('',#10882,#10905,#10907,.T.);+#10905 = VERTEX_POINT('',#10906);+#10906 = CARTESIAN_POINT('',(-4.363934772754,-5.26,0.140014102897));+#10907 = SURFACE_CURVE('',#10908,(#10913,#10924),.PCURVE_S1.);+#10908 = CIRCLE('',#10909,0.28);+#10909 = AXIS2_PLACEMENT_3D('',#10910,#10911,#10912);+#10910 = CARTESIAN_POINT('',(-4.606430027578,-5.26,0.28));+#10911 = DIRECTION('',(0.,-1.,0.));+#10912 = DIRECTION('',(0.,0.,1.));+#10913 = PCURVE('',#10209,#10914);+#10914 = DEFINITIONAL_REPRESENTATION('',(#10915),#10923);+#10915 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10916,#10917,#10918,#10919+ ,#10920,#10921,#10922),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10916 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#10917 = CARTESIAN_POINT('',(-3.5538374051E-02,0.683003010783));+#10918 = CARTESIAN_POINT('',(0.384461625949,0.440515897724));+#10919 = CARTESIAN_POINT('',(0.804461625949,0.198028784664));+#10920 = CARTESIAN_POINT('',(0.384461625949,-4.445832839564E-02));+#10921 = CARTESIAN_POINT('',(-3.5538374051E-02,-0.286945441455));+#10922 = CARTESIAN_POINT('',(-3.5538374051E-02,0.198028784664));+#10923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10924 = PCURVE('',#10551,#10925);+#10925 = DEFINITIONAL_REPRESENTATION('',(#10926),#10930);+#10926 = LINE('',#10927,#10928);+#10927 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#10928 = VECTOR('',#10929,1.);+#10929 = DIRECTION('',(-1.,0.));+#10930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10931 = ORIENTED_EDGE('',*,*,#10932,.F.);+#10932 = EDGE_CURVE('',#10933,#10905,#10935,.T.);+#10933 = VERTEX_POINT('',#10934);+#10934 = CARTESIAN_POINT('',(-3.832854330943,-5.26,1.059995970601));+#10935 = SURFACE_CURVE('',#10936,(#10940,#10947),.PCURVE_S1.);+#10936 = LINE('',#10937,#10938);+#10937 = CARTESIAN_POINT('',(-3.780894551849,-5.26,1.150005036749));+#10938 = VECTOR('',#10939,1.);+#10939 = DIRECTION('',(-0.499949632511,-0.,-0.866054481515));+#10940 = PCURVE('',#10209,#10941);+#10941 = DEFINITIONAL_REPRESENTATION('',(#10942),#10946);+#10942 = LINE('',#10943,#10944);+#10943 = CARTESIAN_POINT('',(-0.6255434108,-0.627506691065));+#10944 = VECTOR('',#10945,1.);+#10945 = DIRECTION('',(0.866054481515,0.499949632511));+#10946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10947 = PCURVE('',#10579,#10948);+#10948 = DEFINITIONAL_REPRESENTATION('',(#10949),#10953);+#10949 = LINE('',#10950,#10951);+#10950 = CARTESIAN_POINT('',(0.103930027578,-0.18));+#10951 = VECTOR('',#10952,1.);+#10952 = DIRECTION('',(-1.,0.));+#10953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10954 = ORIENTED_EDGE('',*,*,#10955,.F.);+#10955 = EDGE_CURVE('',#10956,#10933,#10958,.T.);+#10956 = VERTEX_POINT('',#10957);+#10957 = CARTESIAN_POINT('',(-3.763569972422,-5.26,1.1));+#10958 = SURFACE_CURVE('',#10959,(#10964,#10975),.PCURVE_S1.);+#10959 = CIRCLE('',#10960,8.E-02);+#10960 = AXIS2_PLACEMENT_3D('',#10961,#10962,#10963);+#10961 = CARTESIAN_POINT('',(-3.763569972422,-5.26,1.02));+#10962 = DIRECTION('',(0.,-1.,0.));+#10963 = DIRECTION('',(0.,0.,1.));+#10964 = PCURVE('',#10209,#10965);+#10965 = DEFINITIONAL_REPRESENTATION('',(#10966),#10974);+#10966 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10967,#10968,#10969,#10970+ ,#10971,#10972,#10973),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10967 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#10968 = CARTESIAN_POINT('',(-0.575538374051,-0.506267205886));+#10969 = CARTESIAN_POINT('',(-0.455538374051,-0.575549238189));+#10970 = CARTESIAN_POINT('',(-0.335538374051,-0.644831270492));+#10971 = CARTESIAN_POINT('',(-0.455538374051,-0.714113302795));+#10972 = CARTESIAN_POINT('',(-0.575538374051,-0.783395335098));+#10973 = CARTESIAN_POINT('',(-0.575538374051,-0.644831270492));+#10974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10975 = PCURVE('',#10612,#10976);+#10976 = DEFINITIONAL_REPRESENTATION('',(#10977),#10981);+#10977 = LINE('',#10978,#10979);+#10978 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#10979 = VECTOR('',#10980,1.);+#10980 = DIRECTION('',(-1.,0.));+#10981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10982 = ORIENTED_EDGE('',*,*,#10983,.F.);+#10983 = EDGE_CURVE('',#10984,#10956,#10986,.T.);+#10984 = VERTEX_POINT('',#10985);+#10985 = CARTESIAN_POINT('',(-3.4975,-5.26,1.1));+#10986 = SURFACE_CURVE('',#10987,(#10991,#10998),.PCURVE_S1.);+#10987 = LINE('',#10988,#10989);+#10988 = CARTESIAN_POINT('',(-3.4975,-5.26,1.1));+#10989 = VECTOR('',#10990,1.);+#10990 = DIRECTION('',(-1.,-0.,-0.));+#10991 = PCURVE('',#10209,#10992);+#10992 = DEFINITIONAL_REPRESENTATION('',(#10993),#10997);+#10993 = LINE('',#10994,#10995);+#10994 = CARTESIAN_POINT('',(-0.575538374051,-0.910901242914));+#10995 = VECTOR('',#10996,1.);+#10996 = DIRECTION('',(-0.,1.));+#10997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10998 = PCURVE('',#10640,#10999);+#10999 = DEFINITIONAL_REPRESENTATION('',(#11000),#11004);+#11000 = LINE('',#11001,#11002);+#11001 = CARTESIAN_POINT('',(0.,-0.18));+#11002 = VECTOR('',#11003,1.);+#11003 = DIRECTION('',(-1.,0.));+#11004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11005 = ORIENTED_EDGE('',*,*,#11006,.F.);+#11006 = EDGE_CURVE('',#10707,#10984,#11007,.T.);+#11007 = SURFACE_CURVE('',#11008,(#11013,#11020),.PCURVE_S1.);+#11008 = CIRCLE('',#11009,0.1);+#11009 = AXIS2_PLACEMENT_3D('',#11010,#11011,#11012);+#11010 = CARTESIAN_POINT('',(-3.4975,-5.26,1.2));+#11011 = DIRECTION('',(0.,1.,-0.));+#11012 = DIRECTION('',(-1.,0.,0.));+#11013 = PCURVE('',#10209,#11014);+#11014 = DEFINITIONAL_REPRESENTATION('',(#11015),#11019);+#11015 = CIRCLE('',#11016,0.1);+#11016 = AXIS2_PLACEMENT_2D('',#11017,#11018);+#11017 = CARTESIAN_POINT('',(-0.675538374051,-0.910901242914));+#11018 = DIRECTION('',(0.,1.));+#11019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11020 = PCURVE('',#10669,#11021);+#11021 = DEFINITIONAL_REPRESENTATION('',(#11022),#11026);+#11022 = LINE('',#11023,#11024);+#11023 = CARTESIAN_POINT('',(0.,-0.18));+#11024 = VECTOR('',#11025,1.);+#11025 = DIRECTION('',(1.,0.));+#11026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11027 = ORIENTED_EDGE('',*,*,#10706,.F.);+#11028 = ADVANCED_FACE('',(#11029),#10319,.T.);+#11029 = FACE_BOUND('',#11030,.T.);+#11030 = EDGE_LOOP('',(#11031,#11032,#11053,#11054));+#11031 = ORIENTED_EDGE('',*,*,#10357,.T.);+#11032 = ORIENTED_EDGE('',*,*,#11033,.F.);+#11033 = EDGE_CURVE('',#10757,#10358,#11034,.T.);+#11034 = SURFACE_CURVE('',#11035,(#11039,#11046),.PCURVE_S1.);+#11035 = LINE('',#11036,#11037);+#11036 = CARTESIAN_POINT('',(-4.006065227246,-5.26,1.159985897103));+#11037 = VECTOR('',#11038,1.);+#11038 = DIRECTION('',(0.,1.,0.));+#11039 = PCURVE('',#10319,#11040);+#11040 = DEFINITIONAL_REPRESENTATION('',(#11041),#11045);+#11041 = LINE('',#11042,#11043);+#11042 = CARTESIAN_POINT('',(5.235929597593,-0.18));+#11043 = VECTOR('',#11044,1.);+#11044 = DIRECTION('',(0.,1.));+#11045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11046 = PCURVE('',#10401,#11047);+#11047 = DEFINITIONAL_REPRESENTATION('',(#11048),#11052);+#11048 = LINE('',#11049,#11050);+#11049 = CARTESIAN_POINT('',(0.,-0.18));+#11050 = VECTOR('',#11051,1.);+#11051 = DIRECTION('',(0.,1.));+#11052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11053 = ORIENTED_EDGE('',*,*,#10756,.F.);+#11054 = ORIENTED_EDGE('',*,*,#10303,.T.);+#11055 = ADVANCED_FACE('',(#11056),#10669,.T.);+#11056 = FACE_BOUND('',#11057,.T.);+#11057 = EDGE_LOOP('',(#11058,#11059,#11060,#11081));+#11058 = ORIENTED_EDGE('',*,*,#10729,.F.);+#11059 = ORIENTED_EDGE('',*,*,#11006,.T.);+#11060 = ORIENTED_EDGE('',*,*,#11061,.F.);+#11061 = EDGE_CURVE('',#10625,#10984,#11062,.T.);+#11062 = SURFACE_CURVE('',#11063,(#11067,#11074),.PCURVE_S1.);+#11063 = LINE('',#11064,#11065);+#11064 = CARTESIAN_POINT('',(-3.4975,-4.9,1.1));+#11065 = VECTOR('',#11066,1.);+#11066 = DIRECTION('',(-0.,-1.,-0.));+#11067 = PCURVE('',#10669,#11068);+#11068 = DEFINITIONAL_REPRESENTATION('',(#11069),#11073);+#11069 = LINE('',#11070,#11071);+#11070 = CARTESIAN_POINT('',(4.712388980385,0.18));+#11071 = VECTOR('',#11072,1.);+#11072 = DIRECTION('',(0.,-1.));+#11073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11074 = PCURVE('',#10640,#11075);+#11075 = DEFINITIONAL_REPRESENTATION('',(#11076),#11080);+#11076 = LINE('',#11077,#11078);+#11077 = CARTESIAN_POINT('',(0.,0.18));+#11078 = VECTOR('',#11079,1.);+#11079 = DIRECTION('',(0.,-1.));+#11080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11081 = ORIENTED_EDGE('',*,*,#10652,.F.);+#11082 = ADVANCED_FACE('',(#11083),#10640,.F.);+#11083 = FACE_BOUND('',#11084,.T.);+#11084 = EDGE_LOOP('',(#11085,#11086,#11107,#11108));+#11085 = ORIENTED_EDGE('',*,*,#10983,.T.);+#11086 = ORIENTED_EDGE('',*,*,#11087,.F.);+#11087 = EDGE_CURVE('',#10592,#10956,#11088,.T.);+#11088 = SURFACE_CURVE('',#11089,(#11093,#11100),.PCURVE_S1.);+#11089 = LINE('',#11090,#11091);+#11090 = CARTESIAN_POINT('',(-3.763569972422,-4.9,1.1));+#11091 = VECTOR('',#11092,1.);+#11092 = DIRECTION('',(-0.,-1.,-0.));+#11093 = PCURVE('',#10640,#11094);+#11094 = DEFINITIONAL_REPRESENTATION('',(#11095),#11099);+#11095 = LINE('',#11096,#11097);+#11096 = CARTESIAN_POINT('',(-0.266069972422,0.18));+#11097 = VECTOR('',#11098,1.);+#11098 = DIRECTION('',(0.,-1.));+#11099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11100 = PCURVE('',#10612,#11101);+#11101 = DEFINITIONAL_REPRESENTATION('',(#11102),#11106);+#11102 = LINE('',#11103,#11104);+#11103 = CARTESIAN_POINT('',(6.28318530718,0.18));+#11104 = VECTOR('',#11105,1.);+#11105 = DIRECTION('',(-0.,-1.));+#11106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11107 = ORIENTED_EDGE('',*,*,#10624,.F.);+#11108 = ORIENTED_EDGE('',*,*,#11061,.T.);+#11109 = ADVANCED_FACE('',(#11110),#10612,.F.);+#11110 = FACE_BOUND('',#11111,.F.);+#11111 = EDGE_LOOP('',(#11112,#11113,#11114,#11135));+#11112 = ORIENTED_EDGE('',*,*,#11087,.F.);+#11113 = ORIENTED_EDGE('',*,*,#10591,.T.);+#11114 = ORIENTED_EDGE('',*,*,#11115,.T.);+#11115 = EDGE_CURVE('',#10564,#10933,#11116,.T.);+#11116 = SURFACE_CURVE('',#11117,(#11121,#11128),.PCURVE_S1.);+#11117 = LINE('',#11118,#11119);+#11118 = CARTESIAN_POINT('',(-3.832854330943,-4.9,1.059995970601));+#11119 = VECTOR('',#11120,1.);+#11120 = DIRECTION('',(-0.,-1.,-0.));+#11121 = PCURVE('',#10612,#11122);+#11122 = DEFINITIONAL_REPRESENTATION('',(#11123),#11127);+#11123 = LINE('',#11124,#11125);+#11124 = CARTESIAN_POINT('',(5.235929597593,0.18));+#11125 = VECTOR('',#11126,1.);+#11126 = DIRECTION('',(-0.,-1.));+#11127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11128 = PCURVE('',#10579,#11129);+#11129 = DEFINITIONAL_REPRESENTATION('',(#11130),#11134);+#11130 = LINE('',#11131,#11132);+#11131 = CARTESIAN_POINT('',(0.,0.18));+#11132 = VECTOR('',#11133,1.);+#11133 = DIRECTION('',(0.,-1.));+#11134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11135 = ORIENTED_EDGE('',*,*,#10955,.F.);+#11136 = ADVANCED_FACE('',(#11137),#10579,.F.);+#11137 = FACE_BOUND('',#11138,.T.);+#11138 = EDGE_LOOP('',(#11139,#11140,#11161,#11162));+#11139 = ORIENTED_EDGE('',*,*,#10932,.T.);+#11140 = ORIENTED_EDGE('',*,*,#11141,.F.);+#11141 = EDGE_CURVE('',#10531,#10905,#11142,.T.);+#11142 = SURFACE_CURVE('',#11143,(#11147,#11154),.PCURVE_S1.);+#11143 = LINE('',#11144,#11145);+#11144 = CARTESIAN_POINT('',(-4.363934772754,-4.9,0.140014102897));+#11145 = VECTOR('',#11146,1.);+#11146 = DIRECTION('',(-0.,-1.,-0.));+#11147 = PCURVE('',#10579,#11148);+#11148 = DEFINITIONAL_REPRESENTATION('',(#11149),#11153);+#11149 = LINE('',#11150,#11151);+#11150 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#11151 = VECTOR('',#11152,1.);+#11152 = DIRECTION('',(0.,-1.));+#11153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11154 = PCURVE('',#10551,#11155);+#11155 = DEFINITIONAL_REPRESENTATION('',(#11156),#11160);+#11156 = LINE('',#11157,#11158);+#11157 = CARTESIAN_POINT('',(2.094336944003,0.18));+#11158 = VECTOR('',#11159,1.);+#11159 = DIRECTION('',(-0.,-1.));+#11160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11161 = ORIENTED_EDGE('',*,*,#10563,.F.);+#11162 = ORIENTED_EDGE('',*,*,#11115,.T.);+#11163 = ADVANCED_FACE('',(#11164),#10551,.T.);+#11164 = FACE_BOUND('',#11165,.T.);+#11165 = EDGE_LOOP('',(#11166,#11187,#11188,#11189));+#11166 = ORIENTED_EDGE('',*,*,#11167,.F.);+#11167 = EDGE_CURVE('',#10503,#10882,#11168,.T.);+#11168 = SURFACE_CURVE('',#11169,(#11173,#11180),.PCURVE_S1.);+#11169 = LINE('',#11170,#11171);+#11170 = CARTESIAN_POINT('',(-4.606430027578,-4.9,-5.551115123126E-17));+#11171 = VECTOR('',#11172,1.);+#11172 = DIRECTION('',(-0.,-1.,-0.));+#11173 = PCURVE('',#10551,#11174);+#11174 = DEFINITIONAL_REPRESENTATION('',(#11175),#11179);+#11175 = LINE('',#11176,#11177);+#11176 = CARTESIAN_POINT('',(3.14159265359,0.18));+#11177 = VECTOR('',#11178,1.);+#11178 = DIRECTION('',(-0.,-1.));+#11179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11180 = PCURVE('',#10518,#11181);+#11181 = DEFINITIONAL_REPRESENTATION('',(#11182),#11186);+#11182 = LINE('',#11183,#11184);+#11183 = CARTESIAN_POINT('',(0.,0.18));+#11184 = VECTOR('',#11185,1.);+#11185 = DIRECTION('',(0.,-1.));+#11186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11187 = ORIENTED_EDGE('',*,*,#10530,.T.);+#11188 = ORIENTED_EDGE('',*,*,#11141,.T.);+#11189 = ORIENTED_EDGE('',*,*,#10904,.F.);+#11190 = ADVANCED_FACE('',(#11191),#10518,.F.);+#11191 = FACE_BOUND('',#11192,.T.);+#11192 = EDGE_LOOP('',(#11193,#11194,#11195,#11216));+#11193 = ORIENTED_EDGE('',*,*,#11167,.T.);+#11194 = ORIENTED_EDGE('',*,*,#10881,.T.);+#11195 = ORIENTED_EDGE('',*,*,#11196,.T.);+#11196 = EDGE_CURVE('',#10859,#10475,#11197,.T.);+#11197 = SURFACE_CURVE('',#11198,(#11202,#11209),.PCURVE_S1.);+#11198 = LINE('',#11199,#11200);+#11199 = CARTESIAN_POINT('',(-5.255,-5.42,0.));+#11200 = VECTOR('',#11201,1.);+#11201 = DIRECTION('',(0.,1.,0.));+#11202 = PCURVE('',#10518,#11203);+#11203 = DEFINITIONAL_REPRESENTATION('',(#11204),#11208);+#11204 = LINE('',#11205,#11206);+#11205 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#11206 = VECTOR('',#11207,1.);+#11207 = DIRECTION('',(0.,1.));+#11208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11209 = PCURVE('',#10490,#11210);+#11210 = DEFINITIONAL_REPRESENTATION('',(#11211),#11215);+#11211 = LINE('',#11212,#11213);+#11212 = CARTESIAN_POINT('',(-0.5,-0.34));+#11213 = VECTOR('',#11214,1.);+#11214 = DIRECTION('',(0.,-1.));+#11215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11216 = ORIENTED_EDGE('',*,*,#10502,.F.);+#11217 = ADVANCED_FACE('',(#11218),#10490,.T.);+#11218 = FACE_BOUND('',#11219,.F.);+#11219 = EDGE_LOOP('',(#11220,#11241,#11242,#11243));+#11220 = ORIENTED_EDGE('',*,*,#11221,.F.);+#11221 = EDGE_CURVE('',#10836,#10447,#11222,.T.);+#11222 = SURFACE_CURVE('',#11223,(#11227,#11234),.PCURVE_S1.);+#11223 = LINE('',#11224,#11225);+#11224 = CARTESIAN_POINT('',(-5.255,-5.42,0.2));+#11225 = VECTOR('',#11226,1.);+#11226 = DIRECTION('',(0.,1.,0.));+#11227 = PCURVE('',#10490,#11228);+#11228 = DEFINITIONAL_REPRESENTATION('',(#11229),#11233);+#11229 = LINE('',#11230,#11231);+#11230 = CARTESIAN_POINT('',(-0.7,-0.34));+#11231 = VECTOR('',#11232,1.);+#11232 = DIRECTION('',(0.,-1.));+#11233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11234 = PCURVE('',#10462,#11235);+#11235 = DEFINITIONAL_REPRESENTATION('',(#11236),#11240);+#11236 = LINE('',#11237,#11238);+#11237 = CARTESIAN_POINT('',(-0.648569972422,-0.34));+#11238 = VECTOR('',#11239,1.);+#11239 = DIRECTION('',(0.,1.));+#11240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11241 = ORIENTED_EDGE('',*,*,#10858,.T.);+#11242 = ORIENTED_EDGE('',*,*,#11196,.T.);+#11243 = ORIENTED_EDGE('',*,*,#10474,.F.);+#11244 = ADVANCED_FACE('',(#11245),#10462,.T.);+#11245 = FACE_BOUND('',#11246,.F.);+#11246 = EDGE_LOOP('',(#11247,#11268,#11269,#11270));+#11247 = ORIENTED_EDGE('',*,*,#11248,.T.);+#11248 = EDGE_CURVE('',#10414,#10808,#11249,.T.);+#11249 = SURFACE_CURVE('',#11250,(#11254,#11261),.PCURVE_S1.);+#11250 = LINE('',#11251,#11252);+#11251 = CARTESIAN_POINT('',(-4.606430027578,-4.9,0.2));+#11252 = VECTOR('',#11253,1.);+#11253 = DIRECTION('',(-0.,-1.,-0.));+#11254 = PCURVE('',#10462,#11255);+#11255 = DEFINITIONAL_REPRESENTATION('',(#11256),#11260);+#11256 = LINE('',#11257,#11258);+#11257 = CARTESIAN_POINT('',(0.,0.18));+#11258 = VECTOR('',#11259,1.);+#11259 = DIRECTION('',(0.,-1.));+#11260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11261 = PCURVE('',#10434,#11262);+#11262 = DEFINITIONAL_REPRESENTATION('',(#11263),#11267);+#11263 = LINE('',#11264,#11265);+#11264 = CARTESIAN_POINT('',(3.14159265359,0.18));+#11265 = VECTOR('',#11266,1.);+#11266 = DIRECTION('',(-0.,-1.));+#11267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11268 = ORIENTED_EDGE('',*,*,#10835,.T.);+#11269 = ORIENTED_EDGE('',*,*,#11221,.T.);+#11270 = ORIENTED_EDGE('',*,*,#10446,.F.);+#11271 = ADVANCED_FACE('',(#11272),#10434,.F.);+#11272 = FACE_BOUND('',#11273,.F.);+#11273 = EDGE_LOOP('',(#11274,#11275,#11276,#11297));+#11274 = ORIENTED_EDGE('',*,*,#11248,.F.);+#11275 = ORIENTED_EDGE('',*,*,#10413,.T.);+#11276 = ORIENTED_EDGE('',*,*,#11277,.T.);+#11277 = EDGE_CURVE('',#10386,#10785,#11278,.T.);+#11278 = SURFACE_CURVE('',#11279,(#11283,#11290),.PCURVE_S1.);+#11279 = LINE('',#11280,#11281);+#11280 = CARTESIAN_POINT('',(-4.537145669057,-4.9,0.240004029399));+#11281 = VECTOR('',#11282,1.);+#11282 = DIRECTION('',(-0.,-1.,-0.));+#11283 = PCURVE('',#10434,#11284);+#11284 = DEFINITIONAL_REPRESENTATION('',(#11285),#11289);+#11285 = LINE('',#11286,#11287);+#11286 = CARTESIAN_POINT('',(2.094336944003,0.18));+#11287 = VECTOR('',#11288,1.);+#11288 = DIRECTION('',(-0.,-1.));+#11289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11290 = PCURVE('',#10401,#11291);+#11291 = DEFINITIONAL_REPRESENTATION('',(#11292),#11296);+#11292 = LINE('',#11293,#11294);+#11293 = CARTESIAN_POINT('',(-1.062267891155,0.18));+#11294 = VECTOR('',#11295,1.);+#11295 = DIRECTION('',(0.,-1.));+#11296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11297 = ORIENTED_EDGE('',*,*,#10807,.F.);+#11298 = ADVANCED_FACE('',(#11299),#10401,.T.);+#11299 = FACE_BOUND('',#11300,.F.);+#11300 = EDGE_LOOP('',(#11301,#11302,#11303,#11304));+#11301 = ORIENTED_EDGE('',*,*,#11033,.F.);+#11302 = ORIENTED_EDGE('',*,*,#10784,.T.);+#11303 = ORIENTED_EDGE('',*,*,#11277,.F.);+#11304 = ORIENTED_EDGE('',*,*,#10385,.F.);+#11305 = MANIFOLD_SOLID_BREP('',#11306);+#11306 = CLOSED_SHELL('',(#11307,#11437,#11513,#11851,#11900,#12166,+ #12193,#12220,#12247,#12274,#12301,#12328,#12355,#12382,#12409,+ #12436));+#11307 = ADVANCED_FACE('',(#11308),#11323,.T.);+#11308 = FACE_BOUND('',#11309,.T.);+#11309 = EDGE_LOOP('',(#11310,#11350,#11378,#11411));+#11310 = ORIENTED_EDGE('',*,*,#11311,.T.);+#11311 = EDGE_CURVE('',#11312,#11314,#11316,.T.);+#11312 = VERTEX_POINT('',#11313);+#11313 = CARTESIAN_POINT('',(3.4975,-4.9,1.3));+#11314 = VERTEX_POINT('',#11315);+#11315 = CARTESIAN_POINT('',(3.4475,-4.9,1.286602540378));+#11316 = SURFACE_CURVE('',#11317,(#11322,#11334),.PCURVE_S1.);+#11317 = CIRCLE('',#11318,0.1);+#11318 = AXIS2_PLACEMENT_3D('',#11319,#11320,#11321);+#11319 = CARTESIAN_POINT('',(3.4975,-4.9,1.2));+#11320 = DIRECTION('',(0.,-1.,0.));+#11321 = DIRECTION('',(1.,0.,0.));+#11322 = PCURVE('',#11323,#11328);+#11323 = CYLINDRICAL_SURFACE('',#11324,0.1);+#11324 = AXIS2_PLACEMENT_3D('',#11325,#11326,#11327);+#11325 = CARTESIAN_POINT('',(3.4975,-5.08,1.2));+#11326 = DIRECTION('',(0.,1.,0.));+#11327 = DIRECTION('',(1.,0.,0.));+#11328 = DEFINITIONAL_REPRESENTATION('',(#11329),#11333);+#11329 = LINE('',#11330,#11331);+#11330 = CARTESIAN_POINT('',(6.28318530718,0.18));+#11331 = VECTOR('',#11332,1.);+#11332 = DIRECTION('',(-1.,-0.));+#11333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11334 = PCURVE('',#11335,#11340);+#11335 = PLANE('',#11336);+#11336 = AXIS2_PLACEMENT_3D('',#11337,#11338,#11339);+#11337 = CARTESIAN_POINT('',(4.408401242914,-4.9,0.524461625949));+#11338 = DIRECTION('',(0.,1.,0.));+#11339 = DIRECTION('',(0.,0.,1.));+#11340 = DEFINITIONAL_REPRESENTATION('',(#11341),#11349);+#11341 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11342,#11343,#11344,#11345+ ,#11346,#11347,#11348),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11342 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11343 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#11344 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#11345 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#11346 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#11347 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#11348 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11350 = ORIENTED_EDGE('',*,*,#11351,.F.);+#11351 = EDGE_CURVE('',#11352,#11314,#11354,.T.);+#11352 = VERTEX_POINT('',#11353);+#11353 = CARTESIAN_POINT('',(3.4475,-5.26,1.286602540378));+#11354 = SURFACE_CURVE('',#11355,(#11359,#11366),.PCURVE_S1.);+#11355 = LINE('',#11356,#11357);+#11356 = CARTESIAN_POINT('',(3.4475,-5.08,1.286602540378));+#11357 = VECTOR('',#11358,1.);+#11358 = DIRECTION('',(0.,1.,0.));+#11359 = PCURVE('',#11323,#11360);+#11360 = DEFINITIONAL_REPRESENTATION('',(#11361),#11365);+#11361 = LINE('',#11362,#11363);+#11362 = CARTESIAN_POINT('',(4.188790204787,0.));+#11363 = VECTOR('',#11364,1.);+#11364 = DIRECTION('',(-0.,1.));+#11365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11366 = PCURVE('',#11367,#11372);+#11367 = PLANE('',#11368);+#11368 = AXIS2_PLACEMENT_3D('',#11369,#11370,#11371);+#11369 = CARTESIAN_POINT('',(3.4475,-5.76,-0.5));+#11370 = DIRECTION('',(1.,0.,0.));+#11371 = DIRECTION('',(0.,0.,1.));+#11372 = DEFINITIONAL_REPRESENTATION('',(#11373),#11377);+#11373 = LINE('',#11374,#11375);+#11374 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#11375 = VECTOR('',#11376,1.);+#11376 = DIRECTION('',(0.,-1.));+#11377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11378 = ORIENTED_EDGE('',*,*,#11379,.F.);+#11379 = EDGE_CURVE('',#11380,#11352,#11382,.T.);+#11380 = VERTEX_POINT('',#11381);+#11381 = CARTESIAN_POINT('',(3.4975,-5.26,1.3));+#11382 = SURFACE_CURVE('',#11383,(#11388,#11395),.PCURVE_S1.);+#11383 = CIRCLE('',#11384,0.1);+#11384 = AXIS2_PLACEMENT_3D('',#11385,#11386,#11387);+#11385 = CARTESIAN_POINT('',(3.4975,-5.26,1.2));+#11386 = DIRECTION('',(0.,-1.,0.));+#11387 = DIRECTION('',(1.,0.,0.));+#11388 = PCURVE('',#11323,#11389);+#11389 = DEFINITIONAL_REPRESENTATION('',(#11390),#11394);+#11390 = LINE('',#11391,#11392);+#11391 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#11392 = VECTOR('',#11393,1.);+#11393 = DIRECTION('',(-1.,0.));+#11394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11395 = PCURVE('',#11396,#11401);+#11396 = PLANE('',#11397);+#11397 = AXIS2_PLACEMENT_3D('',#11398,#11399,#11400);+#11398 = CARTESIAN_POINT('',(4.408401242914,-5.26,0.524461625949));+#11399 = DIRECTION('',(0.,1.,0.));+#11400 = DIRECTION('',(0.,0.,1.));+#11401 = DEFINITIONAL_REPRESENTATION('',(#11402),#11410);+#11402 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11403,#11404,#11405,#11406+ ,#11407,#11408,#11409),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11403 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11404 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#11405 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#11406 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#11407 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#11408 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#11409 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11411 = ORIENTED_EDGE('',*,*,#11412,.T.);+#11412 = EDGE_CURVE('',#11380,#11312,#11413,.T.);+#11413 = SURFACE_CURVE('',#11414,(#11418,#11425),.PCURVE_S1.);+#11414 = LINE('',#11415,#11416);+#11415 = CARTESIAN_POINT('',(3.4975,-5.26,1.3));+#11416 = VECTOR('',#11417,1.);+#11417 = DIRECTION('',(0.,1.,0.));+#11418 = PCURVE('',#11323,#11419);+#11419 = DEFINITIONAL_REPRESENTATION('',(#11420),#11424);+#11420 = LINE('',#11421,#11422);+#11421 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#11422 = VECTOR('',#11423,1.);+#11423 = DIRECTION('',(0.,1.));+#11424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11425 = PCURVE('',#11426,#11431);+#11426 = PLANE('',#11427);+#11427 = AXIS2_PLACEMENT_3D('',#11428,#11429,#11430);+#11428 = CARTESIAN_POINT('',(3.4975,-5.08,1.3));+#11429 = DIRECTION('',(0.,0.,1.));+#11430 = DIRECTION('',(1.,0.,0.));+#11431 = DEFINITIONAL_REPRESENTATION('',(#11432),#11436);+#11432 = LINE('',#11433,#11434);+#11433 = CARTESIAN_POINT('',(0.,-0.18));+#11434 = VECTOR('',#11435,1.);+#11435 = DIRECTION('',(0.,1.));+#11436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11437 = ADVANCED_FACE('',(#11438),#11426,.T.);+#11438 = FACE_BOUND('',#11439,.T.);+#11439 = EDGE_LOOP('',(#11440,#11441,#11464,#11492));+#11440 = ORIENTED_EDGE('',*,*,#11412,.F.);+#11441 = ORIENTED_EDGE('',*,*,#11442,.T.);+#11442 = EDGE_CURVE('',#11380,#11443,#11445,.T.);+#11443 = VERTEX_POINT('',#11444);+#11444 = CARTESIAN_POINT('',(3.763569972422,-5.26,1.3));+#11445 = SURFACE_CURVE('',#11446,(#11450,#11457),.PCURVE_S1.);+#11446 = LINE('',#11447,#11448);+#11447 = CARTESIAN_POINT('',(3.4975,-5.26,1.3));+#11448 = VECTOR('',#11449,1.);+#11449 = DIRECTION('',(1.,0.,0.));+#11450 = PCURVE('',#11426,#11451);+#11451 = DEFINITIONAL_REPRESENTATION('',(#11452),#11456);+#11452 = LINE('',#11453,#11454);+#11453 = CARTESIAN_POINT('',(0.,-0.18));+#11454 = VECTOR('',#11455,1.);+#11455 = DIRECTION('',(1.,0.));+#11456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11457 = PCURVE('',#11396,#11458);+#11458 = DEFINITIONAL_REPRESENTATION('',(#11459),#11463);+#11459 = LINE('',#11460,#11461);+#11460 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#11461 = VECTOR('',#11462,1.);+#11462 = DIRECTION('',(0.,1.));+#11463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11464 = ORIENTED_EDGE('',*,*,#11465,.T.);+#11465 = EDGE_CURVE('',#11443,#11466,#11468,.T.);+#11466 = VERTEX_POINT('',#11467);+#11467 = CARTESIAN_POINT('',(3.763569972422,-4.9,1.3));+#11468 = SURFACE_CURVE('',#11469,(#11473,#11480),.PCURVE_S1.);+#11469 = LINE('',#11470,#11471);+#11470 = CARTESIAN_POINT('',(3.763569972422,-5.26,1.3));+#11471 = VECTOR('',#11472,1.);+#11472 = DIRECTION('',(0.,1.,0.));+#11473 = PCURVE('',#11426,#11474);+#11474 = DEFINITIONAL_REPRESENTATION('',(#11475),#11479);+#11475 = LINE('',#11476,#11477);+#11476 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#11477 = VECTOR('',#11478,1.);+#11478 = DIRECTION('',(0.,1.));+#11479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11480 = PCURVE('',#11481,#11486);+#11481 = CYLINDRICAL_SURFACE('',#11482,0.28);+#11482 = AXIS2_PLACEMENT_3D('',#11483,#11484,#11485);+#11483 = CARTESIAN_POINT('',(3.763569972422,-5.08,1.02));+#11484 = DIRECTION('',(0.,1.,0.));+#11485 = DIRECTION('',(0.,0.,1.));+#11486 = DEFINITIONAL_REPRESENTATION('',(#11487),#11491);+#11487 = LINE('',#11488,#11489);+#11488 = CARTESIAN_POINT('',(0.,-0.18));+#11489 = VECTOR('',#11490,1.);+#11490 = DIRECTION('',(-0.,1.));+#11491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11492 = ORIENTED_EDGE('',*,*,#11493,.F.);+#11493 = EDGE_CURVE('',#11312,#11466,#11494,.T.);+#11494 = SURFACE_CURVE('',#11495,(#11499,#11506),.PCURVE_S1.);+#11495 = LINE('',#11496,#11497);+#11496 = CARTESIAN_POINT('',(3.4975,-4.9,1.3));+#11497 = VECTOR('',#11498,1.);+#11498 = DIRECTION('',(1.,0.,0.));+#11499 = PCURVE('',#11426,#11500);+#11500 = DEFINITIONAL_REPRESENTATION('',(#11501),#11505);+#11501 = LINE('',#11502,#11503);+#11502 = CARTESIAN_POINT('',(0.,0.18));+#11503 = VECTOR('',#11504,1.);+#11504 = DIRECTION('',(1.,0.));+#11505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11506 = PCURVE('',#11335,#11507);+#11507 = DEFINITIONAL_REPRESENTATION('',(#11508),#11512);+#11508 = LINE('',#11509,#11510);+#11509 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#11510 = VECTOR('',#11511,1.);+#11511 = DIRECTION('',(0.,1.));+#11512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11513 = ADVANCED_FACE('',(#11514),#11335,.T.);+#11514 = FACE_BOUND('',#11515,.T.);+#11515 = EDGE_LOOP('',(#11516,#11517,#11518,#11542,#11570,#11599,#11627,+ #11655,#11683,#11712,#11740,#11769,#11797,#11830));+#11516 = ORIENTED_EDGE('',*,*,#11311,.F.);+#11517 = ORIENTED_EDGE('',*,*,#11493,.T.);+#11518 = ORIENTED_EDGE('',*,*,#11519,.T.);+#11519 = EDGE_CURVE('',#11466,#11520,#11522,.T.);+#11520 = VERTEX_POINT('',#11521);+#11521 = CARTESIAN_POINT('',(4.006065227246,-4.9,1.159985897103));+#11522 = SURFACE_CURVE('',#11523,(#11528,#11535),.PCURVE_S1.);+#11523 = CIRCLE('',#11524,0.28);+#11524 = AXIS2_PLACEMENT_3D('',#11525,#11526,#11527);+#11525 = CARTESIAN_POINT('',(3.763569972422,-4.9,1.02));+#11526 = DIRECTION('',(0.,1.,0.));+#11527 = DIRECTION('',(0.,0.,1.));+#11528 = PCURVE('',#11335,#11529);+#11529 = DEFINITIONAL_REPRESENTATION('',(#11530),#11534);+#11530 = CIRCLE('',#11531,0.28);+#11531 = AXIS2_PLACEMENT_2D('',#11532,#11533);+#11532 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#11533 = DIRECTION('',(1.,0.));+#11534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11535 = PCURVE('',#11481,#11536);+#11536 = DEFINITIONAL_REPRESENTATION('',(#11537),#11541);+#11537 = LINE('',#11538,#11539);+#11538 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#11539 = VECTOR('',#11540,1.);+#11540 = DIRECTION('',(1.,-0.));+#11541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11542 = ORIENTED_EDGE('',*,*,#11543,.T.);+#11543 = EDGE_CURVE('',#11520,#11544,#11546,.T.);+#11544 = VERTEX_POINT('',#11545);+#11545 = CARTESIAN_POINT('',(4.537145669057,-4.9,0.240004029399));+#11546 = SURFACE_CURVE('',#11547,(#11551,#11558),.PCURVE_S1.);+#11547 = LINE('',#11548,#11549);+#11548 = CARTESIAN_POINT('',(3.954105448151,-4.9,1.249994963251));+#11549 = VECTOR('',#11550,1.);+#11550 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#11551 = PCURVE('',#11335,#11552);+#11552 = DEFINITIONAL_REPRESENTATION('',(#11553),#11557);+#11553 = LINE('',#11554,#11555);+#11554 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#11555 = VECTOR('',#11556,1.);+#11556 = DIRECTION('',(-0.866054481515,0.499949632511));+#11557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11558 = PCURVE('',#11559,#11564);+#11559 = PLANE('',#11560);+#11560 = AXIS2_PLACEMENT_3D('',#11561,#11562,#11563);+#11561 = CARTESIAN_POINT('',(4.006065227246,-5.08,1.159985897103));+#11562 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#11563 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#11564 = DEFINITIONAL_REPRESENTATION('',(#11565),#11569);+#11565 = LINE('',#11566,#11567);+#11566 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#11567 = VECTOR('',#11568,1.);+#11568 = DIRECTION('',(1.,0.));+#11569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11570 = ORIENTED_EDGE('',*,*,#11571,.F.);+#11571 = EDGE_CURVE('',#11572,#11544,#11574,.T.);+#11572 = VERTEX_POINT('',#11573);+#11573 = CARTESIAN_POINT('',(4.606430027578,-4.9,0.2));+#11574 = SURFACE_CURVE('',#11575,(#11580,#11587),.PCURVE_S1.);+#11575 = CIRCLE('',#11576,8.E-02);+#11576 = AXIS2_PLACEMENT_3D('',#11577,#11578,#11579);+#11577 = CARTESIAN_POINT('',(4.606430027578,-4.9,0.28));+#11578 = DIRECTION('',(0.,1.,0.));+#11579 = DIRECTION('',(0.,0.,1.));+#11580 = PCURVE('',#11335,#11581);+#11581 = DEFINITIONAL_REPRESENTATION('',(#11582),#11586);+#11582 = CIRCLE('',#11583,8.E-02);+#11583 = AXIS2_PLACEMENT_2D('',#11584,#11585);+#11584 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#11585 = DIRECTION('',(1.,0.));+#11586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11587 = PCURVE('',#11588,#11593);+#11588 = CYLINDRICAL_SURFACE('',#11589,8.E-02);+#11589 = AXIS2_PLACEMENT_3D('',#11590,#11591,#11592);+#11590 = CARTESIAN_POINT('',(4.606430027578,-5.08,0.28));+#11591 = DIRECTION('',(0.,1.,0.));+#11592 = DIRECTION('',(0.,0.,1.));+#11593 = DEFINITIONAL_REPRESENTATION('',(#11594),#11598);+#11594 = LINE('',#11595,#11596);+#11595 = CARTESIAN_POINT('',(-0.,0.18));+#11596 = VECTOR('',#11597,1.);+#11597 = DIRECTION('',(1.,-0.));+#11598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11599 = ORIENTED_EDGE('',*,*,#11600,.T.);+#11600 = EDGE_CURVE('',#11572,#11601,#11603,.T.);+#11601 = VERTEX_POINT('',#11602);+#11602 = CARTESIAN_POINT('',(5.255,-4.9,0.2));+#11603 = SURFACE_CURVE('',#11604,(#11608,#11615),.PCURVE_S1.);+#11604 = LINE('',#11605,#11606);+#11605 = CARTESIAN_POINT('',(4.5025,-4.9,0.2));+#11606 = VECTOR('',#11607,1.);+#11607 = DIRECTION('',(1.,0.,0.));+#11608 = PCURVE('',#11335,#11609);+#11609 = DEFINITIONAL_REPRESENTATION('',(#11610),#11614);+#11610 = LINE('',#11611,#11612);+#11611 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#11612 = VECTOR('',#11613,1.);+#11613 = DIRECTION('',(0.,1.));+#11614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11615 = PCURVE('',#11616,#11621);+#11616 = PLANE('',#11617);+#11617 = AXIS2_PLACEMENT_3D('',#11618,#11619,#11620);+#11618 = CARTESIAN_POINT('',(4.606430027578,-5.08,0.2));+#11619 = DIRECTION('',(0.,0.,1.));+#11620 = DIRECTION('',(1.,0.,0.));+#11621 = DEFINITIONAL_REPRESENTATION('',(#11622),#11626);+#11622 = LINE('',#11623,#11624);+#11623 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#11624 = VECTOR('',#11625,1.);+#11625 = DIRECTION('',(1.,0.));+#11626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11627 = ORIENTED_EDGE('',*,*,#11628,.T.);+#11628 = EDGE_CURVE('',#11601,#11629,#11631,.T.);+#11629 = VERTEX_POINT('',#11630);+#11630 = CARTESIAN_POINT('',(5.255,-4.9,0.));+#11631 = SURFACE_CURVE('',#11632,(#11636,#11643),.PCURVE_S1.);+#11632 = LINE('',#11633,#11634);+#11633 = CARTESIAN_POINT('',(5.255,-4.9,1.223081297441E-02));+#11634 = VECTOR('',#11635,1.);+#11635 = DIRECTION('',(0.,0.,-1.));+#11636 = PCURVE('',#11335,#11637);+#11637 = DEFINITIONAL_REPRESENTATION('',(#11638),#11642);+#11638 = LINE('',#11639,#11640);+#11639 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#11640 = VECTOR('',#11641,1.);+#11641 = DIRECTION('',(-1.,0.));+#11642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11643 = PCURVE('',#11644,#11649);+#11644 = PLANE('',#11645);+#11645 = AXIS2_PLACEMENT_3D('',#11646,#11647,#11648);+#11646 = CARTESIAN_POINT('',(5.255,-5.76,-0.5));+#11647 = DIRECTION('',(1.,0.,0.));+#11648 = DIRECTION('',(0.,0.,1.));+#11649 = DEFINITIONAL_REPRESENTATION('',(#11650),#11654);+#11650 = LINE('',#11651,#11652);+#11651 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#11652 = VECTOR('',#11653,1.);+#11653 = DIRECTION('',(-1.,0.));+#11654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11655 = ORIENTED_EDGE('',*,*,#11656,.F.);+#11656 = EDGE_CURVE('',#11657,#11629,#11659,.T.);+#11657 = VERTEX_POINT('',#11658);+#11658 = CARTESIAN_POINT('',(4.606430027578,-4.9,-5.551115123126E-17));+#11659 = SURFACE_CURVE('',#11660,(#11664,#11671),.PCURVE_S1.);+#11660 = LINE('',#11661,#11662);+#11661 = CARTESIAN_POINT('',(4.5025,-4.9,0.));+#11662 = VECTOR('',#11663,1.);+#11663 = DIRECTION('',(1.,0.,0.));+#11664 = PCURVE('',#11335,#11665);+#11665 = DEFINITIONAL_REPRESENTATION('',(#11666),#11670);+#11666 = LINE('',#11667,#11668);+#11667 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#11668 = VECTOR('',#11669,1.);+#11669 = DIRECTION('',(0.,1.));+#11670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11671 = PCURVE('',#11672,#11677);+#11672 = PLANE('',#11673);+#11673 = AXIS2_PLACEMENT_3D('',#11674,#11675,#11676);+#11674 = CARTESIAN_POINT('',(4.606430027578,-5.08,0.));+#11675 = DIRECTION('',(0.,0.,1.));+#11676 = DIRECTION('',(1.,0.,0.));+#11677 = DEFINITIONAL_REPRESENTATION('',(#11678),#11682);+#11678 = LINE('',#11679,#11680);+#11679 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#11680 = VECTOR('',#11681,1.);+#11681 = DIRECTION('',(1.,0.));+#11682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11683 = ORIENTED_EDGE('',*,*,#11684,.T.);+#11684 = EDGE_CURVE('',#11657,#11685,#11687,.T.);+#11685 = VERTEX_POINT('',#11686);+#11686 = CARTESIAN_POINT('',(4.363934772754,-4.9,0.140014102897));+#11687 = SURFACE_CURVE('',#11688,(#11693,#11700),.PCURVE_S1.);+#11688 = CIRCLE('',#11689,0.28);+#11689 = AXIS2_PLACEMENT_3D('',#11690,#11691,#11692);+#11690 = CARTESIAN_POINT('',(4.606430027578,-4.9,0.28));+#11691 = DIRECTION('',(0.,1.,0.));+#11692 = DIRECTION('',(0.,0.,1.));+#11693 = PCURVE('',#11335,#11694);+#11694 = DEFINITIONAL_REPRESENTATION('',(#11695),#11699);+#11695 = CIRCLE('',#11696,0.28);+#11696 = AXIS2_PLACEMENT_2D('',#11697,#11698);+#11697 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#11698 = DIRECTION('',(1.,0.));+#11699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11700 = PCURVE('',#11701,#11706);+#11701 = CYLINDRICAL_SURFACE('',#11702,0.28);+#11702 = AXIS2_PLACEMENT_3D('',#11703,#11704,#11705);+#11703 = CARTESIAN_POINT('',(4.606430027578,-5.08,0.28));+#11704 = DIRECTION('',(0.,1.,0.));+#11705 = DIRECTION('',(0.,0.,1.));+#11706 = DEFINITIONAL_REPRESENTATION('',(#11707),#11711);+#11707 = LINE('',#11708,#11709);+#11708 = CARTESIAN_POINT('',(-0.,0.18));+#11709 = VECTOR('',#11710,1.);+#11710 = DIRECTION('',(1.,-0.));+#11711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11712 = ORIENTED_EDGE('',*,*,#11713,.F.);+#11713 = EDGE_CURVE('',#11714,#11685,#11716,.T.);+#11714 = VERTEX_POINT('',#11715);+#11715 = CARTESIAN_POINT('',(3.832854330943,-4.9,1.059995970601));+#11716 = SURFACE_CURVE('',#11717,(#11721,#11728),.PCURVE_S1.);+#11717 = LINE('',#11718,#11719);+#11718 = CARTESIAN_POINT('',(3.780894551849,-4.9,1.150005036749));+#11719 = VECTOR('',#11720,1.);+#11720 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#11721 = PCURVE('',#11335,#11722);+#11722 = DEFINITIONAL_REPRESENTATION('',(#11723),#11727);+#11723 = LINE('',#11724,#11725);+#11724 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#11725 = VECTOR('',#11726,1.);+#11726 = DIRECTION('',(-0.866054481515,0.499949632511));+#11727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11728 = PCURVE('',#11729,#11734);+#11729 = PLANE('',#11730);+#11730 = AXIS2_PLACEMENT_3D('',#11731,#11732,#11733);+#11731 = CARTESIAN_POINT('',(3.832854330943,-5.08,1.059995970601));+#11732 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#11733 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#11734 = DEFINITIONAL_REPRESENTATION('',(#11735),#11739);+#11735 = LINE('',#11736,#11737);+#11736 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#11737 = VECTOR('',#11738,1.);+#11738 = DIRECTION('',(1.,0.));+#11739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11740 = ORIENTED_EDGE('',*,*,#11741,.F.);+#11741 = EDGE_CURVE('',#11742,#11714,#11744,.T.);+#11742 = VERTEX_POINT('',#11743);+#11743 = CARTESIAN_POINT('',(3.763569972422,-4.9,1.1));+#11744 = SURFACE_CURVE('',#11745,(#11750,#11757),.PCURVE_S1.);+#11745 = CIRCLE('',#11746,8.E-02);+#11746 = AXIS2_PLACEMENT_3D('',#11747,#11748,#11749);+#11747 = CARTESIAN_POINT('',(3.763569972422,-4.9,1.02));+#11748 = DIRECTION('',(0.,1.,0.));+#11749 = DIRECTION('',(0.,0.,1.));+#11750 = PCURVE('',#11335,#11751);+#11751 = DEFINITIONAL_REPRESENTATION('',(#11752),#11756);+#11752 = CIRCLE('',#11753,8.E-02);+#11753 = AXIS2_PLACEMENT_2D('',#11754,#11755);+#11754 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#11755 = DIRECTION('',(1.,0.));+#11756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11757 = PCURVE('',#11758,#11763);+#11758 = CYLINDRICAL_SURFACE('',#11759,8.E-02);+#11759 = AXIS2_PLACEMENT_3D('',#11760,#11761,#11762);+#11760 = CARTESIAN_POINT('',(3.763569972422,-5.08,1.02));+#11761 = DIRECTION('',(0.,1.,0.));+#11762 = DIRECTION('',(0.,0.,1.));+#11763 = DEFINITIONAL_REPRESENTATION('',(#11764),#11768);+#11764 = LINE('',#11765,#11766);+#11765 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#11766 = VECTOR('',#11767,1.);+#11767 = DIRECTION('',(1.,-0.));+#11768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11769 = ORIENTED_EDGE('',*,*,#11770,.F.);+#11770 = EDGE_CURVE('',#11771,#11742,#11773,.T.);+#11771 = VERTEX_POINT('',#11772);+#11772 = CARTESIAN_POINT('',(3.4975,-4.9,1.1));+#11773 = SURFACE_CURVE('',#11774,(#11778,#11785),.PCURVE_S1.);+#11774 = LINE('',#11775,#11776);+#11775 = CARTESIAN_POINT('',(3.4975,-4.9,1.1));+#11776 = VECTOR('',#11777,1.);+#11777 = DIRECTION('',(1.,0.,0.));+#11778 = PCURVE('',#11335,#11779);+#11779 = DEFINITIONAL_REPRESENTATION('',(#11780),#11784);+#11780 = LINE('',#11781,#11782);+#11781 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#11782 = VECTOR('',#11783,1.);+#11783 = DIRECTION('',(0.,1.));+#11784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11785 = PCURVE('',#11786,#11791);+#11786 = PLANE('',#11787);+#11787 = AXIS2_PLACEMENT_3D('',#11788,#11789,#11790);+#11788 = CARTESIAN_POINT('',(3.4975,-5.08,1.1));+#11789 = DIRECTION('',(0.,0.,1.));+#11790 = DIRECTION('',(1.,0.,0.));+#11791 = DEFINITIONAL_REPRESENTATION('',(#11792),#11796);+#11792 = LINE('',#11793,#11794);+#11793 = CARTESIAN_POINT('',(0.,0.18));+#11794 = VECTOR('',#11795,1.);+#11795 = DIRECTION('',(1.,0.));+#11796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11797 = ORIENTED_EDGE('',*,*,#11798,.F.);+#11798 = EDGE_CURVE('',#11799,#11771,#11801,.T.);+#11799 = VERTEX_POINT('',#11800);+#11800 = CARTESIAN_POINT('',(3.4475,-4.9,1.113397459622));+#11801 = SURFACE_CURVE('',#11802,(#11807,#11818),.PCURVE_S1.);+#11802 = CIRCLE('',#11803,0.1);+#11803 = AXIS2_PLACEMENT_3D('',#11804,#11805,#11806);+#11804 = CARTESIAN_POINT('',(3.4975,-4.9,1.2));+#11805 = DIRECTION('',(0.,-1.,0.));+#11806 = DIRECTION('',(1.,0.,0.));+#11807 = PCURVE('',#11335,#11808);+#11808 = DEFINITIONAL_REPRESENTATION('',(#11809),#11817);+#11809 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11810,#11811,#11812,#11813+ ,#11814,#11815,#11816),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11810 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11811 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#11812 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#11813 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#11814 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#11815 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#11816 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#11817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11818 = PCURVE('',#11819,#11824);+#11819 = CYLINDRICAL_SURFACE('',#11820,0.1);+#11820 = AXIS2_PLACEMENT_3D('',#11821,#11822,#11823);+#11821 = CARTESIAN_POINT('',(3.4975,-5.08,1.2));+#11822 = DIRECTION('',(0.,1.,0.));+#11823 = DIRECTION('',(1.,0.,0.));+#11824 = DEFINITIONAL_REPRESENTATION('',(#11825),#11829);+#11825 = LINE('',#11826,#11827);+#11826 = CARTESIAN_POINT('',(6.28318530718,0.18));+#11827 = VECTOR('',#11828,1.);+#11828 = DIRECTION('',(-1.,-0.));+#11829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11830 = ORIENTED_EDGE('',*,*,#11831,.F.);+#11831 = EDGE_CURVE('',#11314,#11799,#11832,.T.);+#11832 = SURFACE_CURVE('',#11833,(#11837,#11844),.PCURVE_S1.);+#11833 = LINE('',#11834,#11835);+#11834 = CARTESIAN_POINT('',(3.4475,-4.9,1.223081297441E-02));+#11835 = VECTOR('',#11836,1.);+#11836 = DIRECTION('',(0.,0.,-1.));+#11837 = PCURVE('',#11335,#11838);+#11838 = DEFINITIONAL_REPRESENTATION('',(#11839),#11843);+#11839 = LINE('',#11840,#11841);+#11840 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#11841 = VECTOR('',#11842,1.);+#11842 = DIRECTION('',(-1.,0.));+#11843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11844 = PCURVE('',#11367,#11845);+#11845 = DEFINITIONAL_REPRESENTATION('',(#11846),#11850);+#11846 = LINE('',#11847,#11848);+#11847 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#11848 = VECTOR('',#11849,1.);+#11849 = DIRECTION('',(-1.,0.));+#11850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11851 = ADVANCED_FACE('',(#11852),#11367,.F.);+#11852 = FACE_BOUND('',#11853,.F.);+#11853 = EDGE_LOOP('',(#11854,#11855,#11878,#11899));+#11854 = ORIENTED_EDGE('',*,*,#11351,.F.);+#11855 = ORIENTED_EDGE('',*,*,#11856,.T.);+#11856 = EDGE_CURVE('',#11352,#11857,#11859,.T.);+#11857 = VERTEX_POINT('',#11858);+#11858 = CARTESIAN_POINT('',(3.4475,-5.26,1.113397459622));+#11859 = SURFACE_CURVE('',#11860,(#11864,#11871),.PCURVE_S1.);+#11860 = LINE('',#11861,#11862);+#11861 = CARTESIAN_POINT('',(3.4475,-5.26,1.223081297441E-02));+#11862 = VECTOR('',#11863,1.);+#11863 = DIRECTION('',(0.,0.,-1.));+#11864 = PCURVE('',#11367,#11865);+#11865 = DEFINITIONAL_REPRESENTATION('',(#11866),#11870);+#11866 = LINE('',#11867,#11868);+#11867 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#11868 = VECTOR('',#11869,1.);+#11869 = DIRECTION('',(-1.,0.));+#11870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11871 = PCURVE('',#11396,#11872);+#11872 = DEFINITIONAL_REPRESENTATION('',(#11873),#11877);+#11873 = LINE('',#11874,#11875);+#11874 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#11875 = VECTOR('',#11876,1.);+#11876 = DIRECTION('',(-1.,0.));+#11877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11878 = ORIENTED_EDGE('',*,*,#11879,.T.);+#11879 = EDGE_CURVE('',#11857,#11799,#11880,.T.);+#11880 = SURFACE_CURVE('',#11881,(#11885,#11892),.PCURVE_S1.);+#11881 = LINE('',#11882,#11883);+#11882 = CARTESIAN_POINT('',(3.4475,-5.08,1.113397459622));+#11883 = VECTOR('',#11884,1.);+#11884 = DIRECTION('',(0.,1.,0.));+#11885 = PCURVE('',#11367,#11886);+#11886 = DEFINITIONAL_REPRESENTATION('',(#11887),#11891);+#11887 = LINE('',#11888,#11889);+#11888 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#11889 = VECTOR('',#11890,1.);+#11890 = DIRECTION('',(0.,-1.));+#11891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11892 = PCURVE('',#11819,#11893);+#11893 = DEFINITIONAL_REPRESENTATION('',(#11894),#11898);+#11894 = LINE('',#11895,#11896);+#11895 = CARTESIAN_POINT('',(2.094395102394,0.));+#11896 = VECTOR('',#11897,1.);+#11897 = DIRECTION('',(-0.,1.));+#11898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11899 = ORIENTED_EDGE('',*,*,#11831,.F.);+#11900 = ADVANCED_FACE('',(#11901),#11396,.F.);+#11901 = FACE_BOUND('',#11902,.F.);+#11902 = EDGE_LOOP('',(#11903,#11904,#11905,#11929,#11952,#11976,#11999,+ #12022,#12045,#12069,#12092,#12116,#12139,#12165));+#11903 = ORIENTED_EDGE('',*,*,#11379,.F.);+#11904 = ORIENTED_EDGE('',*,*,#11442,.T.);+#11905 = ORIENTED_EDGE('',*,*,#11906,.T.);+#11906 = EDGE_CURVE('',#11443,#11907,#11909,.T.);+#11907 = VERTEX_POINT('',#11908);+#11908 = CARTESIAN_POINT('',(4.006065227246,-5.26,1.159985897103));+#11909 = SURFACE_CURVE('',#11910,(#11915,#11922),.PCURVE_S1.);+#11910 = CIRCLE('',#11911,0.28);+#11911 = AXIS2_PLACEMENT_3D('',#11912,#11913,#11914);+#11912 = CARTESIAN_POINT('',(3.763569972422,-5.26,1.02));+#11913 = DIRECTION('',(0.,1.,0.));+#11914 = DIRECTION('',(0.,0.,1.));+#11915 = PCURVE('',#11396,#11916);+#11916 = DEFINITIONAL_REPRESENTATION('',(#11917),#11921);+#11917 = CIRCLE('',#11918,0.28);+#11918 = AXIS2_PLACEMENT_2D('',#11919,#11920);+#11919 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#11920 = DIRECTION('',(1.,0.));+#11921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11922 = PCURVE('',#11481,#11923);+#11923 = DEFINITIONAL_REPRESENTATION('',(#11924),#11928);+#11924 = LINE('',#11925,#11926);+#11925 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#11926 = VECTOR('',#11927,1.);+#11927 = DIRECTION('',(1.,0.));+#11928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11929 = ORIENTED_EDGE('',*,*,#11930,.T.);+#11930 = EDGE_CURVE('',#11907,#11931,#11933,.T.);+#11931 = VERTEX_POINT('',#11932);+#11932 = CARTESIAN_POINT('',(4.537145669057,-5.26,0.240004029399));+#11933 = SURFACE_CURVE('',#11934,(#11938,#11945),.PCURVE_S1.);+#11934 = LINE('',#11935,#11936);+#11935 = CARTESIAN_POINT('',(3.954105448151,-5.26,1.249994963251));+#11936 = VECTOR('',#11937,1.);+#11937 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#11938 = PCURVE('',#11396,#11939);+#11939 = DEFINITIONAL_REPRESENTATION('',(#11940),#11944);+#11940 = LINE('',#11941,#11942);+#11941 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#11942 = VECTOR('',#11943,1.);+#11943 = DIRECTION('',(-0.866054481515,0.499949632511));+#11944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11945 = PCURVE('',#11559,#11946);+#11946 = DEFINITIONAL_REPRESENTATION('',(#11947),#11951);+#11947 = LINE('',#11948,#11949);+#11948 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#11949 = VECTOR('',#11950,1.);+#11950 = DIRECTION('',(1.,0.));+#11951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11952 = ORIENTED_EDGE('',*,*,#11953,.F.);+#11953 = EDGE_CURVE('',#11954,#11931,#11956,.T.);+#11954 = VERTEX_POINT('',#11955);+#11955 = CARTESIAN_POINT('',(4.606430027578,-5.26,0.2));+#11956 = SURFACE_CURVE('',#11957,(#11962,#11969),.PCURVE_S1.);+#11957 = CIRCLE('',#11958,8.E-02);+#11958 = AXIS2_PLACEMENT_3D('',#11959,#11960,#11961);+#11959 = CARTESIAN_POINT('',(4.606430027578,-5.26,0.28));+#11960 = DIRECTION('',(0.,1.,0.));+#11961 = DIRECTION('',(0.,0.,1.));+#11962 = PCURVE('',#11396,#11963);+#11963 = DEFINITIONAL_REPRESENTATION('',(#11964),#11968);+#11964 = CIRCLE('',#11965,8.E-02);+#11965 = AXIS2_PLACEMENT_2D('',#11966,#11967);+#11966 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#11967 = DIRECTION('',(1.,0.));+#11968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11969 = PCURVE('',#11588,#11970);+#11970 = DEFINITIONAL_REPRESENTATION('',(#11971),#11975);+#11971 = LINE('',#11972,#11973);+#11972 = CARTESIAN_POINT('',(0.,-0.18));+#11973 = VECTOR('',#11974,1.);+#11974 = DIRECTION('',(1.,0.));+#11975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11976 = ORIENTED_EDGE('',*,*,#11977,.T.);+#11977 = EDGE_CURVE('',#11954,#11978,#11980,.T.);+#11978 = VERTEX_POINT('',#11979);+#11979 = CARTESIAN_POINT('',(5.255,-5.26,0.2));+#11980 = SURFACE_CURVE('',#11981,(#11985,#11992),.PCURVE_S1.);+#11981 = LINE('',#11982,#11983);+#11982 = CARTESIAN_POINT('',(4.5025,-5.26,0.2));+#11983 = VECTOR('',#11984,1.);+#11984 = DIRECTION('',(1.,0.,0.));+#11985 = PCURVE('',#11396,#11986);+#11986 = DEFINITIONAL_REPRESENTATION('',(#11987),#11991);+#11987 = LINE('',#11988,#11989);+#11988 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#11989 = VECTOR('',#11990,1.);+#11990 = DIRECTION('',(0.,1.));+#11991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11992 = PCURVE('',#11616,#11993);+#11993 = DEFINITIONAL_REPRESENTATION('',(#11994),#11998);+#11994 = LINE('',#11995,#11996);+#11995 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#11996 = VECTOR('',#11997,1.);+#11997 = DIRECTION('',(1.,0.));+#11998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11999 = ORIENTED_EDGE('',*,*,#12000,.T.);+#12000 = EDGE_CURVE('',#11978,#12001,#12003,.T.);+#12001 = VERTEX_POINT('',#12002);+#12002 = CARTESIAN_POINT('',(5.255,-5.26,0.));+#12003 = SURFACE_CURVE('',#12004,(#12008,#12015),.PCURVE_S1.);+#12004 = LINE('',#12005,#12006);+#12005 = CARTESIAN_POINT('',(5.255,-5.26,1.223081297441E-02));+#12006 = VECTOR('',#12007,1.);+#12007 = DIRECTION('',(0.,0.,-1.));+#12008 = PCURVE('',#11396,#12009);+#12009 = DEFINITIONAL_REPRESENTATION('',(#12010),#12014);+#12010 = LINE('',#12011,#12012);+#12011 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#12012 = VECTOR('',#12013,1.);+#12013 = DIRECTION('',(-1.,0.));+#12014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12015 = PCURVE('',#11644,#12016);+#12016 = DEFINITIONAL_REPRESENTATION('',(#12017),#12021);+#12017 = LINE('',#12018,#12019);+#12018 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#12019 = VECTOR('',#12020,1.);+#12020 = DIRECTION('',(-1.,0.));+#12021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12022 = ORIENTED_EDGE('',*,*,#12023,.F.);+#12023 = EDGE_CURVE('',#12024,#12001,#12026,.T.);+#12024 = VERTEX_POINT('',#12025);+#12025 = CARTESIAN_POINT('',(4.606430027578,-5.26,-5.551115123126E-17));+#12026 = SURFACE_CURVE('',#12027,(#12031,#12038),.PCURVE_S1.);+#12027 = LINE('',#12028,#12029);+#12028 = CARTESIAN_POINT('',(4.5025,-5.26,0.));+#12029 = VECTOR('',#12030,1.);+#12030 = DIRECTION('',(1.,0.,0.));+#12031 = PCURVE('',#11396,#12032);+#12032 = DEFINITIONAL_REPRESENTATION('',(#12033),#12037);+#12033 = LINE('',#12034,#12035);+#12034 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#12035 = VECTOR('',#12036,1.);+#12036 = DIRECTION('',(0.,1.));+#12037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12038 = PCURVE('',#11672,#12039);+#12039 = DEFINITIONAL_REPRESENTATION('',(#12040),#12044);+#12040 = LINE('',#12041,#12042);+#12041 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#12042 = VECTOR('',#12043,1.);+#12043 = DIRECTION('',(1.,0.));+#12044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12045 = ORIENTED_EDGE('',*,*,#12046,.T.);+#12046 = EDGE_CURVE('',#12024,#12047,#12049,.T.);+#12047 = VERTEX_POINT('',#12048);+#12048 = CARTESIAN_POINT('',(4.363934772754,-5.26,0.140014102897));+#12049 = SURFACE_CURVE('',#12050,(#12055,#12062),.PCURVE_S1.);+#12050 = CIRCLE('',#12051,0.28);+#12051 = AXIS2_PLACEMENT_3D('',#12052,#12053,#12054);+#12052 = CARTESIAN_POINT('',(4.606430027578,-5.26,0.28));+#12053 = DIRECTION('',(0.,1.,0.));+#12054 = DIRECTION('',(0.,0.,1.));+#12055 = PCURVE('',#11396,#12056);+#12056 = DEFINITIONAL_REPRESENTATION('',(#12057),#12061);+#12057 = CIRCLE('',#12058,0.28);+#12058 = AXIS2_PLACEMENT_2D('',#12059,#12060);+#12059 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#12060 = DIRECTION('',(1.,0.));+#12061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12062 = PCURVE('',#11701,#12063);+#12063 = DEFINITIONAL_REPRESENTATION('',(#12064),#12068);+#12064 = LINE('',#12065,#12066);+#12065 = CARTESIAN_POINT('',(0.,-0.18));+#12066 = VECTOR('',#12067,1.);+#12067 = DIRECTION('',(1.,0.));+#12068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12069 = ORIENTED_EDGE('',*,*,#12070,.F.);+#12070 = EDGE_CURVE('',#12071,#12047,#12073,.T.);+#12071 = VERTEX_POINT('',#12072);+#12072 = CARTESIAN_POINT('',(3.832854330943,-5.26,1.059995970601));+#12073 = SURFACE_CURVE('',#12074,(#12078,#12085),.PCURVE_S1.);+#12074 = LINE('',#12075,#12076);+#12075 = CARTESIAN_POINT('',(3.780894551849,-5.26,1.150005036749));+#12076 = VECTOR('',#12077,1.);+#12077 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#12078 = PCURVE('',#11396,#12079);+#12079 = DEFINITIONAL_REPRESENTATION('',(#12080),#12084);+#12080 = LINE('',#12081,#12082);+#12081 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#12082 = VECTOR('',#12083,1.);+#12083 = DIRECTION('',(-0.866054481515,0.499949632511));+#12084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12085 = PCURVE('',#11729,#12086);+#12086 = DEFINITIONAL_REPRESENTATION('',(#12087),#12091);+#12087 = LINE('',#12088,#12089);+#12088 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#12089 = VECTOR('',#12090,1.);+#12090 = DIRECTION('',(1.,0.));+#12091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12092 = ORIENTED_EDGE('',*,*,#12093,.F.);+#12093 = EDGE_CURVE('',#12094,#12071,#12096,.T.);+#12094 = VERTEX_POINT('',#12095);+#12095 = CARTESIAN_POINT('',(3.763569972422,-5.26,1.1));+#12096 = SURFACE_CURVE('',#12097,(#12102,#12109),.PCURVE_S1.);+#12097 = CIRCLE('',#12098,8.E-02);+#12098 = AXIS2_PLACEMENT_3D('',#12099,#12100,#12101);+#12099 = CARTESIAN_POINT('',(3.763569972422,-5.26,1.02));+#12100 = DIRECTION('',(0.,1.,0.));+#12101 = DIRECTION('',(0.,0.,1.));+#12102 = PCURVE('',#11396,#12103);+#12103 = DEFINITIONAL_REPRESENTATION('',(#12104),#12108);+#12104 = CIRCLE('',#12105,8.E-02);+#12105 = AXIS2_PLACEMENT_2D('',#12106,#12107);+#12106 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#12107 = DIRECTION('',(1.,0.));+#12108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12109 = PCURVE('',#11758,#12110);+#12110 = DEFINITIONAL_REPRESENTATION('',(#12111),#12115);+#12111 = LINE('',#12112,#12113);+#12112 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#12113 = VECTOR('',#12114,1.);+#12114 = DIRECTION('',(1.,0.));+#12115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12116 = ORIENTED_EDGE('',*,*,#12117,.F.);+#12117 = EDGE_CURVE('',#12118,#12094,#12120,.T.);+#12118 = VERTEX_POINT('',#12119);+#12119 = CARTESIAN_POINT('',(3.4975,-5.26,1.1));+#12120 = SURFACE_CURVE('',#12121,(#12125,#12132),.PCURVE_S1.);+#12121 = LINE('',#12122,#12123);+#12122 = CARTESIAN_POINT('',(3.4975,-5.26,1.1));+#12123 = VECTOR('',#12124,1.);+#12124 = DIRECTION('',(1.,0.,0.));+#12125 = PCURVE('',#11396,#12126);+#12126 = DEFINITIONAL_REPRESENTATION('',(#12127),#12131);+#12127 = LINE('',#12128,#12129);+#12128 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#12129 = VECTOR('',#12130,1.);+#12130 = DIRECTION('',(0.,1.));+#12131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12132 = PCURVE('',#11786,#12133);+#12133 = DEFINITIONAL_REPRESENTATION('',(#12134),#12138);+#12134 = LINE('',#12135,#12136);+#12135 = CARTESIAN_POINT('',(0.,-0.18));+#12136 = VECTOR('',#12137,1.);+#12137 = DIRECTION('',(1.,0.));+#12138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12139 = ORIENTED_EDGE('',*,*,#12140,.F.);+#12140 = EDGE_CURVE('',#11857,#12118,#12141,.T.);+#12141 = SURFACE_CURVE('',#12142,(#12147,#12158),.PCURVE_S1.);+#12142 = CIRCLE('',#12143,0.1);+#12143 = AXIS2_PLACEMENT_3D('',#12144,#12145,#12146);+#12144 = CARTESIAN_POINT('',(3.4975,-5.26,1.2));+#12145 = DIRECTION('',(0.,-1.,0.));+#12146 = DIRECTION('',(1.,0.,0.));+#12147 = PCURVE('',#11396,#12148);+#12148 = DEFINITIONAL_REPRESENTATION('',(#12149),#12157);+#12149 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12150,#12151,#12152,#12153+ ,#12154,#12155,#12156),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12150 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12151 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#12152 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#12153 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#12154 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#12155 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#12156 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12158 = PCURVE('',#11819,#12159);+#12159 = DEFINITIONAL_REPRESENTATION('',(#12160),#12164);+#12160 = LINE('',#12161,#12162);+#12161 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#12162 = VECTOR('',#12163,1.);+#12163 = DIRECTION('',(-1.,0.));+#12164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12165 = ORIENTED_EDGE('',*,*,#11856,.F.);+#12166 = ADVANCED_FACE('',(#12167),#11481,.T.);+#12167 = FACE_BOUND('',#12168,.T.);+#12168 = EDGE_LOOP('',(#12169,#12170,#12171,#12192));+#12169 = ORIENTED_EDGE('',*,*,#11465,.F.);+#12170 = ORIENTED_EDGE('',*,*,#11906,.T.);+#12171 = ORIENTED_EDGE('',*,*,#12172,.T.);+#12172 = EDGE_CURVE('',#11907,#11520,#12173,.T.);+#12173 = SURFACE_CURVE('',#12174,(#12178,#12185),.PCURVE_S1.);+#12174 = LINE('',#12175,#12176);+#12175 = CARTESIAN_POINT('',(4.006065227246,-5.26,1.159985897103));+#12176 = VECTOR('',#12177,1.);+#12177 = DIRECTION('',(0.,1.,0.));+#12178 = PCURVE('',#11481,#12179);+#12179 = DEFINITIONAL_REPRESENTATION('',(#12180),#12184);+#12180 = LINE('',#12181,#12182);+#12181 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#12182 = VECTOR('',#12183,1.);+#12183 = DIRECTION('',(-0.,1.));+#12184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12185 = PCURVE('',#11559,#12186);+#12186 = DEFINITIONAL_REPRESENTATION('',(#12187),#12191);+#12187 = LINE('',#12188,#12189);+#12188 = CARTESIAN_POINT('',(0.,-0.18));+#12189 = VECTOR('',#12190,1.);+#12190 = DIRECTION('',(0.,1.));+#12191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12192 = ORIENTED_EDGE('',*,*,#11519,.F.);+#12193 = ADVANCED_FACE('',(#12194),#11819,.T.);+#12194 = FACE_BOUND('',#12195,.T.);+#12195 = EDGE_LOOP('',(#12196,#12197,#12218,#12219));+#12196 = ORIENTED_EDGE('',*,*,#11798,.T.);+#12197 = ORIENTED_EDGE('',*,*,#12198,.T.);+#12198 = EDGE_CURVE('',#11771,#12118,#12199,.T.);+#12199 = SURFACE_CURVE('',#12200,(#12204,#12211),.PCURVE_S1.);+#12200 = LINE('',#12201,#12202);+#12201 = CARTESIAN_POINT('',(3.4975,-4.9,1.1));+#12202 = VECTOR('',#12203,1.);+#12203 = DIRECTION('',(0.,-1.,0.));+#12204 = PCURVE('',#11819,#12205);+#12205 = DEFINITIONAL_REPRESENTATION('',(#12206),#12210);+#12206 = LINE('',#12207,#12208);+#12207 = CARTESIAN_POINT('',(1.570796326795,0.18));+#12208 = VECTOR('',#12209,1.);+#12209 = DIRECTION('',(-0.,-1.));+#12210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12211 = PCURVE('',#11786,#12212);+#12212 = DEFINITIONAL_REPRESENTATION('',(#12213),#12217);+#12213 = LINE('',#12214,#12215);+#12214 = CARTESIAN_POINT('',(0.,0.18));+#12215 = VECTOR('',#12216,1.);+#12216 = DIRECTION('',(0.,-1.));+#12217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12218 = ORIENTED_EDGE('',*,*,#12140,.F.);+#12219 = ORIENTED_EDGE('',*,*,#11879,.T.);+#12220 = ADVANCED_FACE('',(#12221),#11786,.F.);+#12221 = FACE_BOUND('',#12222,.F.);+#12222 = EDGE_LOOP('',(#12223,#12224,#12245,#12246));+#12223 = ORIENTED_EDGE('',*,*,#12117,.T.);+#12224 = ORIENTED_EDGE('',*,*,#12225,.F.);+#12225 = EDGE_CURVE('',#11742,#12094,#12226,.T.);+#12226 = SURFACE_CURVE('',#12227,(#12231,#12238),.PCURVE_S1.);+#12227 = LINE('',#12228,#12229);+#12228 = CARTESIAN_POINT('',(3.763569972422,-4.9,1.1));+#12229 = VECTOR('',#12230,1.);+#12230 = DIRECTION('',(0.,-1.,0.));+#12231 = PCURVE('',#11786,#12232);+#12232 = DEFINITIONAL_REPRESENTATION('',(#12233),#12237);+#12233 = LINE('',#12234,#12235);+#12234 = CARTESIAN_POINT('',(0.266069972422,0.18));+#12235 = VECTOR('',#12236,1.);+#12236 = DIRECTION('',(0.,-1.));+#12237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12238 = PCURVE('',#11758,#12239);+#12239 = DEFINITIONAL_REPRESENTATION('',(#12240),#12244);+#12240 = LINE('',#12241,#12242);+#12241 = CARTESIAN_POINT('',(0.,0.18));+#12242 = VECTOR('',#12243,1.);+#12243 = DIRECTION('',(0.,-1.));+#12244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12245 = ORIENTED_EDGE('',*,*,#11770,.F.);+#12246 = ORIENTED_EDGE('',*,*,#12198,.T.);+#12247 = ADVANCED_FACE('',(#12248),#11758,.F.);+#12248 = FACE_BOUND('',#12249,.F.);+#12249 = EDGE_LOOP('',(#12250,#12251,#12272,#12273));+#12250 = ORIENTED_EDGE('',*,*,#12093,.T.);+#12251 = ORIENTED_EDGE('',*,*,#12252,.F.);+#12252 = EDGE_CURVE('',#11714,#12071,#12253,.T.);+#12253 = SURFACE_CURVE('',#12254,(#12258,#12265),.PCURVE_S1.);+#12254 = LINE('',#12255,#12256);+#12255 = CARTESIAN_POINT('',(3.832854330943,-4.9,1.059995970601));+#12256 = VECTOR('',#12257,1.);+#12257 = DIRECTION('',(0.,-1.,0.));+#12258 = PCURVE('',#11758,#12259);+#12259 = DEFINITIONAL_REPRESENTATION('',(#12260),#12264);+#12260 = LINE('',#12261,#12262);+#12261 = CARTESIAN_POINT('',(1.047255709587,0.18));+#12262 = VECTOR('',#12263,1.);+#12263 = DIRECTION('',(0.,-1.));+#12264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12265 = PCURVE('',#11729,#12266);+#12266 = DEFINITIONAL_REPRESENTATION('',(#12267),#12271);+#12267 = LINE('',#12268,#12269);+#12268 = CARTESIAN_POINT('',(0.,0.18));+#12269 = VECTOR('',#12270,1.);+#12270 = DIRECTION('',(0.,-1.));+#12271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12272 = ORIENTED_EDGE('',*,*,#11741,.F.);+#12273 = ORIENTED_EDGE('',*,*,#12225,.T.);+#12274 = ADVANCED_FACE('',(#12275),#11729,.F.);+#12275 = FACE_BOUND('',#12276,.F.);+#12276 = EDGE_LOOP('',(#12277,#12278,#12299,#12300));+#12277 = ORIENTED_EDGE('',*,*,#12070,.T.);+#12278 = ORIENTED_EDGE('',*,*,#12279,.F.);+#12279 = EDGE_CURVE('',#11685,#12047,#12280,.T.);+#12280 = SURFACE_CURVE('',#12281,(#12285,#12292),.PCURVE_S1.);+#12281 = LINE('',#12282,#12283);+#12282 = CARTESIAN_POINT('',(4.363934772754,-4.9,0.140014102897));+#12283 = VECTOR('',#12284,1.);+#12284 = DIRECTION('',(0.,-1.,0.));+#12285 = PCURVE('',#11729,#12286);+#12286 = DEFINITIONAL_REPRESENTATION('',(#12287),#12291);+#12287 = LINE('',#12288,#12289);+#12288 = CARTESIAN_POINT('',(1.062267891155,0.18));+#12289 = VECTOR('',#12290,1.);+#12290 = DIRECTION('',(0.,-1.));+#12291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12292 = PCURVE('',#11701,#12293);+#12293 = DEFINITIONAL_REPRESENTATION('',(#12294),#12298);+#12294 = LINE('',#12295,#12296);+#12295 = CARTESIAN_POINT('',(4.188848363177,0.18));+#12296 = VECTOR('',#12297,1.);+#12297 = DIRECTION('',(0.,-1.));+#12298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12299 = ORIENTED_EDGE('',*,*,#11713,.F.);+#12300 = ORIENTED_EDGE('',*,*,#12252,.T.);+#12301 = ADVANCED_FACE('',(#12302),#11701,.T.);+#12302 = FACE_BOUND('',#12303,.T.);+#12303 = EDGE_LOOP('',(#12304,#12305,#12306,#12307));+#12304 = ORIENTED_EDGE('',*,*,#12046,.T.);+#12305 = ORIENTED_EDGE('',*,*,#12279,.F.);+#12306 = ORIENTED_EDGE('',*,*,#11684,.F.);+#12307 = ORIENTED_EDGE('',*,*,#12308,.T.);+#12308 = EDGE_CURVE('',#11657,#12024,#12309,.T.);+#12309 = SURFACE_CURVE('',#12310,(#12314,#12321),.PCURVE_S1.);+#12310 = LINE('',#12311,#12312);+#12311 = CARTESIAN_POINT('',(4.606430027578,-4.9,-5.551115123126E-17));+#12312 = VECTOR('',#12313,1.);+#12313 = DIRECTION('',(0.,-1.,0.));+#12314 = PCURVE('',#11701,#12315);+#12315 = DEFINITIONAL_REPRESENTATION('',(#12316),#12320);+#12316 = LINE('',#12317,#12318);+#12317 = CARTESIAN_POINT('',(3.14159265359,0.18));+#12318 = VECTOR('',#12319,1.);+#12319 = DIRECTION('',(0.,-1.));+#12320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12321 = PCURVE('',#11672,#12322);+#12322 = DEFINITIONAL_REPRESENTATION('',(#12323),#12327);+#12323 = LINE('',#12324,#12325);+#12324 = CARTESIAN_POINT('',(0.,0.18));+#12325 = VECTOR('',#12326,1.);+#12326 = DIRECTION('',(0.,-1.));+#12327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12328 = ADVANCED_FACE('',(#12329),#11672,.F.);+#12329 = FACE_BOUND('',#12330,.F.);+#12330 = EDGE_LOOP('',(#12331,#12332,#12333,#12354));+#12331 = ORIENTED_EDGE('',*,*,#12308,.T.);+#12332 = ORIENTED_EDGE('',*,*,#12023,.T.);+#12333 = ORIENTED_EDGE('',*,*,#12334,.T.);+#12334 = EDGE_CURVE('',#12001,#11629,#12335,.T.);+#12335 = SURFACE_CURVE('',#12336,(#12340,#12347),.PCURVE_S1.);+#12336 = LINE('',#12337,#12338);+#12337 = CARTESIAN_POINT('',(5.255,-5.42,0.));+#12338 = VECTOR('',#12339,1.);+#12339 = DIRECTION('',(0.,1.,0.));+#12340 = PCURVE('',#11672,#12341);+#12341 = DEFINITIONAL_REPRESENTATION('',(#12342),#12346);+#12342 = LINE('',#12343,#12344);+#12343 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#12344 = VECTOR('',#12345,1.);+#12345 = DIRECTION('',(0.,1.));+#12346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12347 = PCURVE('',#11644,#12348);+#12348 = DEFINITIONAL_REPRESENTATION('',(#12349),#12353);+#12349 = LINE('',#12350,#12351);+#12350 = CARTESIAN_POINT('',(0.5,-0.34));+#12351 = VECTOR('',#12352,1.);+#12352 = DIRECTION('',(0.,-1.));+#12353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12354 = ORIENTED_EDGE('',*,*,#11656,.F.);+#12355 = ADVANCED_FACE('',(#12356),#11644,.T.);+#12356 = FACE_BOUND('',#12357,.T.);+#12357 = EDGE_LOOP('',(#12358,#12379,#12380,#12381));+#12358 = ORIENTED_EDGE('',*,*,#12359,.F.);+#12359 = EDGE_CURVE('',#11978,#11601,#12360,.T.);+#12360 = SURFACE_CURVE('',#12361,(#12365,#12372),.PCURVE_S1.);+#12361 = LINE('',#12362,#12363);+#12362 = CARTESIAN_POINT('',(5.255,-5.42,0.2));+#12363 = VECTOR('',#12364,1.);+#12364 = DIRECTION('',(0.,1.,0.));+#12365 = PCURVE('',#11644,#12366);+#12366 = DEFINITIONAL_REPRESENTATION('',(#12367),#12371);+#12367 = LINE('',#12368,#12369);+#12368 = CARTESIAN_POINT('',(0.7,-0.34));+#12369 = VECTOR('',#12370,1.);+#12370 = DIRECTION('',(0.,-1.));+#12371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12372 = PCURVE('',#11616,#12373);+#12373 = DEFINITIONAL_REPRESENTATION('',(#12374),#12378);+#12374 = LINE('',#12375,#12376);+#12375 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#12376 = VECTOR('',#12377,1.);+#12377 = DIRECTION('',(0.,1.));+#12378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12379 = ORIENTED_EDGE('',*,*,#12000,.T.);+#12380 = ORIENTED_EDGE('',*,*,#12334,.T.);+#12381 = ORIENTED_EDGE('',*,*,#11628,.F.);+#12382 = ADVANCED_FACE('',(#12383),#11616,.T.);+#12383 = FACE_BOUND('',#12384,.T.);+#12384 = EDGE_LOOP('',(#12385,#12406,#12407,#12408));+#12385 = ORIENTED_EDGE('',*,*,#12386,.T.);+#12386 = EDGE_CURVE('',#11572,#11954,#12387,.T.);+#12387 = SURFACE_CURVE('',#12388,(#12392,#12399),.PCURVE_S1.);+#12388 = LINE('',#12389,#12390);+#12389 = CARTESIAN_POINT('',(4.606430027578,-4.9,0.2));+#12390 = VECTOR('',#12391,1.);+#12391 = DIRECTION('',(0.,-1.,0.));+#12392 = PCURVE('',#11616,#12393);+#12393 = DEFINITIONAL_REPRESENTATION('',(#12394),#12398);+#12394 = LINE('',#12395,#12396);+#12395 = CARTESIAN_POINT('',(0.,0.18));+#12396 = VECTOR('',#12397,1.);+#12397 = DIRECTION('',(0.,-1.));+#12398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12399 = PCURVE('',#11588,#12400);+#12400 = DEFINITIONAL_REPRESENTATION('',(#12401),#12405);+#12401 = LINE('',#12402,#12403);+#12402 = CARTESIAN_POINT('',(3.14159265359,0.18));+#12403 = VECTOR('',#12404,1.);+#12404 = DIRECTION('',(0.,-1.));+#12405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12406 = ORIENTED_EDGE('',*,*,#11977,.T.);+#12407 = ORIENTED_EDGE('',*,*,#12359,.T.);+#12408 = ORIENTED_EDGE('',*,*,#11600,.F.);+#12409 = ADVANCED_FACE('',(#12410),#11588,.F.);+#12410 = FACE_BOUND('',#12411,.F.);+#12411 = EDGE_LOOP('',(#12412,#12413,#12434,#12435));+#12412 = ORIENTED_EDGE('',*,*,#11953,.T.);+#12413 = ORIENTED_EDGE('',*,*,#12414,.F.);+#12414 = EDGE_CURVE('',#11544,#11931,#12415,.T.);+#12415 = SURFACE_CURVE('',#12416,(#12420,#12427),.PCURVE_S1.);+#12416 = LINE('',#12417,#12418);+#12417 = CARTESIAN_POINT('',(4.537145669057,-4.9,0.240004029399));+#12418 = VECTOR('',#12419,1.);+#12419 = DIRECTION('',(0.,-1.,0.));+#12420 = PCURVE('',#11588,#12421);+#12421 = DEFINITIONAL_REPRESENTATION('',(#12422),#12426);+#12422 = LINE('',#12423,#12424);+#12423 = CARTESIAN_POINT('',(4.188848363177,0.18));+#12424 = VECTOR('',#12425,1.);+#12425 = DIRECTION('',(0.,-1.));+#12426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12427 = PCURVE('',#11559,#12428);+#12428 = DEFINITIONAL_REPRESENTATION('',(#12429),#12433);+#12429 = LINE('',#12430,#12431);+#12430 = CARTESIAN_POINT('',(1.062267891155,0.18));+#12431 = VECTOR('',#12432,1.);+#12432 = DIRECTION('',(0.,-1.));+#12433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12434 = ORIENTED_EDGE('',*,*,#11571,.F.);+#12435 = ORIENTED_EDGE('',*,*,#12386,.T.);+#12436 = ADVANCED_FACE('',(#12437),#11559,.T.);+#12437 = FACE_BOUND('',#12438,.T.);+#12438 = EDGE_LOOP('',(#12439,#12440,#12441,#12442));+#12439 = ORIENTED_EDGE('',*,*,#12172,.F.);+#12440 = ORIENTED_EDGE('',*,*,#11930,.T.);+#12441 = ORIENTED_EDGE('',*,*,#12414,.F.);+#12442 = ORIENTED_EDGE('',*,*,#11543,.F.);+#12443 = MANIFOLD_SOLID_BREP('',#12444);+#12444 = CLOSED_SHELL('',(#12445,#12575,#12651,#12989,#13038,#13304,+ #13331,#13358,#13385,#13412,#13439,#13466,#13493,#13520,#13547,+ #13574));+#12445 = ADVANCED_FACE('',(#12446),#12461,.T.);+#12446 = FACE_BOUND('',#12447,.T.);+#12447 = EDGE_LOOP('',(#12448,#12488,#12516,#12549));+#12448 = ORIENTED_EDGE('',*,*,#12449,.T.);+#12449 = EDGE_CURVE('',#12450,#12452,#12454,.T.);+#12450 = VERTEX_POINT('',#12451);+#12451 = CARTESIAN_POINT('',(3.4975,-3.63,1.3));+#12452 = VERTEX_POINT('',#12453);+#12453 = CARTESIAN_POINT('',(3.4475,-3.63,1.286602540378));+#12454 = SURFACE_CURVE('',#12455,(#12460,#12472),.PCURVE_S1.);+#12455 = CIRCLE('',#12456,0.1);+#12456 = AXIS2_PLACEMENT_3D('',#12457,#12458,#12459);+#12457 = CARTESIAN_POINT('',(3.4975,-3.63,1.2));+#12458 = DIRECTION('',(0.,-1.,0.));+#12459 = DIRECTION('',(1.,0.,0.));+#12460 = PCURVE('',#12461,#12466);+#12461 = CYLINDRICAL_SURFACE('',#12462,0.1);+#12462 = AXIS2_PLACEMENT_3D('',#12463,#12464,#12465);+#12463 = CARTESIAN_POINT('',(3.4975,-3.81,1.2));+#12464 = DIRECTION('',(0.,1.,0.));+#12465 = DIRECTION('',(1.,0.,0.));+#12466 = DEFINITIONAL_REPRESENTATION('',(#12467),#12471);+#12467 = LINE('',#12468,#12469);+#12468 = CARTESIAN_POINT('',(6.28318530718,0.18));+#12469 = VECTOR('',#12470,1.);+#12470 = DIRECTION('',(-1.,-0.));+#12471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12472 = PCURVE('',#12473,#12478);+#12473 = PLANE('',#12474);+#12474 = AXIS2_PLACEMENT_3D('',#12475,#12476,#12477);+#12475 = CARTESIAN_POINT('',(4.408401242914,-3.63,0.524461625949));+#12476 = DIRECTION('',(0.,1.,0.));+#12477 = DIRECTION('',(0.,0.,1.));+#12478 = DEFINITIONAL_REPRESENTATION('',(#12479),#12487);+#12479 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12480,#12481,#12482,#12483+ ,#12484,#12485,#12486),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12480 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12481 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#12482 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#12483 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#12484 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#12485 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#12486 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12488 = ORIENTED_EDGE('',*,*,#12489,.F.);+#12489 = EDGE_CURVE('',#12490,#12452,#12492,.T.);+#12490 = VERTEX_POINT('',#12491);+#12491 = CARTESIAN_POINT('',(3.4475,-3.99,1.286602540378));+#12492 = SURFACE_CURVE('',#12493,(#12497,#12504),.PCURVE_S1.);+#12493 = LINE('',#12494,#12495);+#12494 = CARTESIAN_POINT('',(3.4475,-3.81,1.286602540378));+#12495 = VECTOR('',#12496,1.);+#12496 = DIRECTION('',(0.,1.,0.));+#12497 = PCURVE('',#12461,#12498);+#12498 = DEFINITIONAL_REPRESENTATION('',(#12499),#12503);+#12499 = LINE('',#12500,#12501);+#12500 = CARTESIAN_POINT('',(4.188790204787,0.));+#12501 = VECTOR('',#12502,1.);+#12502 = DIRECTION('',(-0.,1.));+#12503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12504 = PCURVE('',#12505,#12510);+#12505 = PLANE('',#12506);+#12506 = AXIS2_PLACEMENT_3D('',#12507,#12508,#12509);+#12507 = CARTESIAN_POINT('',(3.4475,-4.49,-0.5));+#12508 = DIRECTION('',(1.,0.,0.));+#12509 = DIRECTION('',(0.,0.,1.));+#12510 = DEFINITIONAL_REPRESENTATION('',(#12511),#12515);+#12511 = LINE('',#12512,#12513);+#12512 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#12513 = VECTOR('',#12514,1.);+#12514 = DIRECTION('',(0.,-1.));+#12515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12516 = ORIENTED_EDGE('',*,*,#12517,.F.);+#12517 = EDGE_CURVE('',#12518,#12490,#12520,.T.);+#12518 = VERTEX_POINT('',#12519);+#12519 = CARTESIAN_POINT('',(3.4975,-3.99,1.3));+#12520 = SURFACE_CURVE('',#12521,(#12526,#12533),.PCURVE_S1.);+#12521 = CIRCLE('',#12522,0.1);+#12522 = AXIS2_PLACEMENT_3D('',#12523,#12524,#12525);+#12523 = CARTESIAN_POINT('',(3.4975,-3.99,1.2));+#12524 = DIRECTION('',(0.,-1.,0.));+#12525 = DIRECTION('',(1.,0.,0.));+#12526 = PCURVE('',#12461,#12527);+#12527 = DEFINITIONAL_REPRESENTATION('',(#12528),#12532);+#12528 = LINE('',#12529,#12530);+#12529 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#12530 = VECTOR('',#12531,1.);+#12531 = DIRECTION('',(-1.,0.));+#12532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12533 = PCURVE('',#12534,#12539);+#12534 = PLANE('',#12535);+#12535 = AXIS2_PLACEMENT_3D('',#12536,#12537,#12538);+#12536 = CARTESIAN_POINT('',(4.408401242914,-3.99,0.524461625949));+#12537 = DIRECTION('',(0.,1.,0.));+#12538 = DIRECTION('',(0.,0.,1.));+#12539 = DEFINITIONAL_REPRESENTATION('',(#12540),#12548);+#12540 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12541,#12542,#12543,#12544+ ,#12545,#12546,#12547),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12541 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12542 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#12543 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#12544 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#12545 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#12546 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#12547 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12549 = ORIENTED_EDGE('',*,*,#12550,.T.);+#12550 = EDGE_CURVE('',#12518,#12450,#12551,.T.);+#12551 = SURFACE_CURVE('',#12552,(#12556,#12563),.PCURVE_S1.);+#12552 = LINE('',#12553,#12554);+#12553 = CARTESIAN_POINT('',(3.4975,-3.99,1.3));+#12554 = VECTOR('',#12555,1.);+#12555 = DIRECTION('',(0.,1.,0.));+#12556 = PCURVE('',#12461,#12557);+#12557 = DEFINITIONAL_REPRESENTATION('',(#12558),#12562);+#12558 = LINE('',#12559,#12560);+#12559 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#12560 = VECTOR('',#12561,1.);+#12561 = DIRECTION('',(0.,1.));+#12562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12563 = PCURVE('',#12564,#12569);+#12564 = PLANE('',#12565);+#12565 = AXIS2_PLACEMENT_3D('',#12566,#12567,#12568);+#12566 = CARTESIAN_POINT('',(3.4975,-3.81,1.3));+#12567 = DIRECTION('',(0.,0.,1.));+#12568 = DIRECTION('',(1.,0.,0.));+#12569 = DEFINITIONAL_REPRESENTATION('',(#12570),#12574);+#12570 = LINE('',#12571,#12572);+#12571 = CARTESIAN_POINT('',(0.,-0.18));+#12572 = VECTOR('',#12573,1.);+#12573 = DIRECTION('',(0.,1.));+#12574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12575 = ADVANCED_FACE('',(#12576),#12564,.T.);+#12576 = FACE_BOUND('',#12577,.T.);+#12577 = EDGE_LOOP('',(#12578,#12579,#12602,#12630));+#12578 = ORIENTED_EDGE('',*,*,#12550,.F.);+#12579 = ORIENTED_EDGE('',*,*,#12580,.T.);+#12580 = EDGE_CURVE('',#12518,#12581,#12583,.T.);+#12581 = VERTEX_POINT('',#12582);+#12582 = CARTESIAN_POINT('',(3.763569972422,-3.99,1.3));+#12583 = SURFACE_CURVE('',#12584,(#12588,#12595),.PCURVE_S1.);+#12584 = LINE('',#12585,#12586);+#12585 = CARTESIAN_POINT('',(3.4975,-3.99,1.3));+#12586 = VECTOR('',#12587,1.);+#12587 = DIRECTION('',(1.,0.,0.));+#12588 = PCURVE('',#12564,#12589);+#12589 = DEFINITIONAL_REPRESENTATION('',(#12590),#12594);+#12590 = LINE('',#12591,#12592);+#12591 = CARTESIAN_POINT('',(0.,-0.18));+#12592 = VECTOR('',#12593,1.);+#12593 = DIRECTION('',(1.,0.));+#12594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12595 = PCURVE('',#12534,#12596);+#12596 = DEFINITIONAL_REPRESENTATION('',(#12597),#12601);+#12597 = LINE('',#12598,#12599);+#12598 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#12599 = VECTOR('',#12600,1.);+#12600 = DIRECTION('',(0.,1.));+#12601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12602 = ORIENTED_EDGE('',*,*,#12603,.T.);+#12603 = EDGE_CURVE('',#12581,#12604,#12606,.T.);+#12604 = VERTEX_POINT('',#12605);+#12605 = CARTESIAN_POINT('',(3.763569972422,-3.63,1.3));+#12606 = SURFACE_CURVE('',#12607,(#12611,#12618),.PCURVE_S1.);+#12607 = LINE('',#12608,#12609);+#12608 = CARTESIAN_POINT('',(3.763569972422,-3.99,1.3));+#12609 = VECTOR('',#12610,1.);+#12610 = DIRECTION('',(0.,1.,0.));+#12611 = PCURVE('',#12564,#12612);+#12612 = DEFINITIONAL_REPRESENTATION('',(#12613),#12617);+#12613 = LINE('',#12614,#12615);+#12614 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#12615 = VECTOR('',#12616,1.);+#12616 = DIRECTION('',(0.,1.));+#12617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12618 = PCURVE('',#12619,#12624);+#12619 = CYLINDRICAL_SURFACE('',#12620,0.28);+#12620 = AXIS2_PLACEMENT_3D('',#12621,#12622,#12623);+#12621 = CARTESIAN_POINT('',(3.763569972422,-3.81,1.02));+#12622 = DIRECTION('',(0.,1.,0.));+#12623 = DIRECTION('',(0.,0.,1.));+#12624 = DEFINITIONAL_REPRESENTATION('',(#12625),#12629);+#12625 = LINE('',#12626,#12627);+#12626 = CARTESIAN_POINT('',(0.,-0.18));+#12627 = VECTOR('',#12628,1.);+#12628 = DIRECTION('',(-0.,1.));+#12629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12630 = ORIENTED_EDGE('',*,*,#12631,.F.);+#12631 = EDGE_CURVE('',#12450,#12604,#12632,.T.);+#12632 = SURFACE_CURVE('',#12633,(#12637,#12644),.PCURVE_S1.);+#12633 = LINE('',#12634,#12635);+#12634 = CARTESIAN_POINT('',(3.4975,-3.63,1.3));+#12635 = VECTOR('',#12636,1.);+#12636 = DIRECTION('',(1.,0.,0.));+#12637 = PCURVE('',#12564,#12638);+#12638 = DEFINITIONAL_REPRESENTATION('',(#12639),#12643);+#12639 = LINE('',#12640,#12641);+#12640 = CARTESIAN_POINT('',(0.,0.18));+#12641 = VECTOR('',#12642,1.);+#12642 = DIRECTION('',(1.,0.));+#12643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12644 = PCURVE('',#12473,#12645);+#12645 = DEFINITIONAL_REPRESENTATION('',(#12646),#12650);+#12646 = LINE('',#12647,#12648);+#12647 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#12648 = VECTOR('',#12649,1.);+#12649 = DIRECTION('',(0.,1.));+#12650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12651 = ADVANCED_FACE('',(#12652),#12473,.T.);+#12652 = FACE_BOUND('',#12653,.T.);+#12653 = EDGE_LOOP('',(#12654,#12655,#12656,#12680,#12708,#12737,#12765,+ #12793,#12821,#12850,#12878,#12907,#12935,#12968));+#12654 = ORIENTED_EDGE('',*,*,#12449,.F.);+#12655 = ORIENTED_EDGE('',*,*,#12631,.T.);+#12656 = ORIENTED_EDGE('',*,*,#12657,.T.);+#12657 = EDGE_CURVE('',#12604,#12658,#12660,.T.);+#12658 = VERTEX_POINT('',#12659);+#12659 = CARTESIAN_POINT('',(4.006065227246,-3.63,1.159985897103));+#12660 = SURFACE_CURVE('',#12661,(#12666,#12673),.PCURVE_S1.);+#12661 = CIRCLE('',#12662,0.28);+#12662 = AXIS2_PLACEMENT_3D('',#12663,#12664,#12665);+#12663 = CARTESIAN_POINT('',(3.763569972422,-3.63,1.02));+#12664 = DIRECTION('',(0.,1.,0.));+#12665 = DIRECTION('',(0.,0.,1.));+#12666 = PCURVE('',#12473,#12667);+#12667 = DEFINITIONAL_REPRESENTATION('',(#12668),#12672);+#12668 = CIRCLE('',#12669,0.28);+#12669 = AXIS2_PLACEMENT_2D('',#12670,#12671);+#12670 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#12671 = DIRECTION('',(1.,0.));+#12672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12673 = PCURVE('',#12619,#12674);+#12674 = DEFINITIONAL_REPRESENTATION('',(#12675),#12679);+#12675 = LINE('',#12676,#12677);+#12676 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#12677 = VECTOR('',#12678,1.);+#12678 = DIRECTION('',(1.,-0.));+#12679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12680 = ORIENTED_EDGE('',*,*,#12681,.T.);+#12681 = EDGE_CURVE('',#12658,#12682,#12684,.T.);+#12682 = VERTEX_POINT('',#12683);+#12683 = CARTESIAN_POINT('',(4.537145669057,-3.63,0.240004029399));+#12684 = SURFACE_CURVE('',#12685,(#12689,#12696),.PCURVE_S1.);+#12685 = LINE('',#12686,#12687);+#12686 = CARTESIAN_POINT('',(3.954105448151,-3.63,1.249994963251));+#12687 = VECTOR('',#12688,1.);+#12688 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#12689 = PCURVE('',#12473,#12690);+#12690 = DEFINITIONAL_REPRESENTATION('',(#12691),#12695);+#12691 = LINE('',#12692,#12693);+#12692 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#12693 = VECTOR('',#12694,1.);+#12694 = DIRECTION('',(-0.866054481515,0.499949632511));+#12695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12696 = PCURVE('',#12697,#12702);+#12697 = PLANE('',#12698);+#12698 = AXIS2_PLACEMENT_3D('',#12699,#12700,#12701);+#12699 = CARTESIAN_POINT('',(4.006065227246,-3.81,1.159985897103));+#12700 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#12701 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#12702 = DEFINITIONAL_REPRESENTATION('',(#12703),#12707);+#12703 = LINE('',#12704,#12705);+#12704 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#12705 = VECTOR('',#12706,1.);+#12706 = DIRECTION('',(1.,0.));+#12707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12708 = ORIENTED_EDGE('',*,*,#12709,.F.);+#12709 = EDGE_CURVE('',#12710,#12682,#12712,.T.);+#12710 = VERTEX_POINT('',#12711);+#12711 = CARTESIAN_POINT('',(4.606430027578,-3.63,0.2));+#12712 = SURFACE_CURVE('',#12713,(#12718,#12725),.PCURVE_S1.);+#12713 = CIRCLE('',#12714,8.E-02);+#12714 = AXIS2_PLACEMENT_3D('',#12715,#12716,#12717);+#12715 = CARTESIAN_POINT('',(4.606430027578,-3.63,0.28));+#12716 = DIRECTION('',(0.,1.,0.));+#12717 = DIRECTION('',(0.,0.,1.));+#12718 = PCURVE('',#12473,#12719);+#12719 = DEFINITIONAL_REPRESENTATION('',(#12720),#12724);+#12720 = CIRCLE('',#12721,8.E-02);+#12721 = AXIS2_PLACEMENT_2D('',#12722,#12723);+#12722 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#12723 = DIRECTION('',(1.,0.));+#12724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12725 = PCURVE('',#12726,#12731);+#12726 = CYLINDRICAL_SURFACE('',#12727,8.E-02);+#12727 = AXIS2_PLACEMENT_3D('',#12728,#12729,#12730);+#12728 = CARTESIAN_POINT('',(4.606430027578,-3.81,0.28));+#12729 = DIRECTION('',(0.,1.,0.));+#12730 = DIRECTION('',(0.,0.,1.));+#12731 = DEFINITIONAL_REPRESENTATION('',(#12732),#12736);+#12732 = LINE('',#12733,#12734);+#12733 = CARTESIAN_POINT('',(-0.,0.18));+#12734 = VECTOR('',#12735,1.);+#12735 = DIRECTION('',(1.,-0.));+#12736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12737 = ORIENTED_EDGE('',*,*,#12738,.T.);+#12738 = EDGE_CURVE('',#12710,#12739,#12741,.T.);+#12739 = VERTEX_POINT('',#12740);+#12740 = CARTESIAN_POINT('',(5.255,-3.63,0.2));+#12741 = SURFACE_CURVE('',#12742,(#12746,#12753),.PCURVE_S1.);+#12742 = LINE('',#12743,#12744);+#12743 = CARTESIAN_POINT('',(4.5025,-3.63,0.2));+#12744 = VECTOR('',#12745,1.);+#12745 = DIRECTION('',(1.,0.,0.));+#12746 = PCURVE('',#12473,#12747);+#12747 = DEFINITIONAL_REPRESENTATION('',(#12748),#12752);+#12748 = LINE('',#12749,#12750);+#12749 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#12750 = VECTOR('',#12751,1.);+#12751 = DIRECTION('',(0.,1.));+#12752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12753 = PCURVE('',#12754,#12759);+#12754 = PLANE('',#12755);+#12755 = AXIS2_PLACEMENT_3D('',#12756,#12757,#12758);+#12756 = CARTESIAN_POINT('',(4.606430027578,-3.81,0.2));+#12757 = DIRECTION('',(0.,0.,1.));+#12758 = DIRECTION('',(1.,0.,0.));+#12759 = DEFINITIONAL_REPRESENTATION('',(#12760),#12764);+#12760 = LINE('',#12761,#12762);+#12761 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#12762 = VECTOR('',#12763,1.);+#12763 = DIRECTION('',(1.,0.));+#12764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12765 = ORIENTED_EDGE('',*,*,#12766,.T.);+#12766 = EDGE_CURVE('',#12739,#12767,#12769,.T.);+#12767 = VERTEX_POINT('',#12768);+#12768 = CARTESIAN_POINT('',(5.255,-3.63,0.));+#12769 = SURFACE_CURVE('',#12770,(#12774,#12781),.PCURVE_S1.);+#12770 = LINE('',#12771,#12772);+#12771 = CARTESIAN_POINT('',(5.255,-3.63,1.223081297441E-02));+#12772 = VECTOR('',#12773,1.);+#12773 = DIRECTION('',(0.,0.,-1.));+#12774 = PCURVE('',#12473,#12775);+#12775 = DEFINITIONAL_REPRESENTATION('',(#12776),#12780);+#12776 = LINE('',#12777,#12778);+#12777 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#12778 = VECTOR('',#12779,1.);+#12779 = DIRECTION('',(-1.,0.));+#12780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12781 = PCURVE('',#12782,#12787);+#12782 = PLANE('',#12783);+#12783 = AXIS2_PLACEMENT_3D('',#12784,#12785,#12786);+#12784 = CARTESIAN_POINT('',(5.255,-4.49,-0.5));+#12785 = DIRECTION('',(1.,0.,0.));+#12786 = DIRECTION('',(0.,0.,1.));+#12787 = DEFINITIONAL_REPRESENTATION('',(#12788),#12792);+#12788 = LINE('',#12789,#12790);+#12789 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#12790 = VECTOR('',#12791,1.);+#12791 = DIRECTION('',(-1.,0.));+#12792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12793 = ORIENTED_EDGE('',*,*,#12794,.F.);+#12794 = EDGE_CURVE('',#12795,#12767,#12797,.T.);+#12795 = VERTEX_POINT('',#12796);+#12796 = CARTESIAN_POINT('',(4.606430027578,-3.63,-5.551115123126E-17));+#12797 = SURFACE_CURVE('',#12798,(#12802,#12809),.PCURVE_S1.);+#12798 = LINE('',#12799,#12800);+#12799 = CARTESIAN_POINT('',(4.5025,-3.63,0.));+#12800 = VECTOR('',#12801,1.);+#12801 = DIRECTION('',(1.,0.,0.));+#12802 = PCURVE('',#12473,#12803);+#12803 = DEFINITIONAL_REPRESENTATION('',(#12804),#12808);+#12804 = LINE('',#12805,#12806);+#12805 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#12806 = VECTOR('',#12807,1.);+#12807 = DIRECTION('',(0.,1.));+#12808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12809 = PCURVE('',#12810,#12815);+#12810 = PLANE('',#12811);+#12811 = AXIS2_PLACEMENT_3D('',#12812,#12813,#12814);+#12812 = CARTESIAN_POINT('',(4.606430027578,-3.81,0.));+#12813 = DIRECTION('',(0.,0.,1.));+#12814 = DIRECTION('',(1.,0.,0.));+#12815 = DEFINITIONAL_REPRESENTATION('',(#12816),#12820);+#12816 = LINE('',#12817,#12818);+#12817 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#12818 = VECTOR('',#12819,1.);+#12819 = DIRECTION('',(1.,0.));+#12820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12821 = ORIENTED_EDGE('',*,*,#12822,.T.);+#12822 = EDGE_CURVE('',#12795,#12823,#12825,.T.);+#12823 = VERTEX_POINT('',#12824);+#12824 = CARTESIAN_POINT('',(4.363934772754,-3.63,0.140014102897));+#12825 = SURFACE_CURVE('',#12826,(#12831,#12838),.PCURVE_S1.);+#12826 = CIRCLE('',#12827,0.28);+#12827 = AXIS2_PLACEMENT_3D('',#12828,#12829,#12830);+#12828 = CARTESIAN_POINT('',(4.606430027578,-3.63,0.28));+#12829 = DIRECTION('',(0.,1.,0.));+#12830 = DIRECTION('',(0.,0.,1.));+#12831 = PCURVE('',#12473,#12832);+#12832 = DEFINITIONAL_REPRESENTATION('',(#12833),#12837);+#12833 = CIRCLE('',#12834,0.28);+#12834 = AXIS2_PLACEMENT_2D('',#12835,#12836);+#12835 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#12836 = DIRECTION('',(1.,0.));+#12837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12838 = PCURVE('',#12839,#12844);+#12839 = CYLINDRICAL_SURFACE('',#12840,0.28);+#12840 = AXIS2_PLACEMENT_3D('',#12841,#12842,#12843);+#12841 = CARTESIAN_POINT('',(4.606430027578,-3.81,0.28));+#12842 = DIRECTION('',(0.,1.,0.));+#12843 = DIRECTION('',(0.,0.,1.));+#12844 = DEFINITIONAL_REPRESENTATION('',(#12845),#12849);+#12845 = LINE('',#12846,#12847);+#12846 = CARTESIAN_POINT('',(-0.,0.18));+#12847 = VECTOR('',#12848,1.);+#12848 = DIRECTION('',(1.,-0.));+#12849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12850 = ORIENTED_EDGE('',*,*,#12851,.F.);+#12851 = EDGE_CURVE('',#12852,#12823,#12854,.T.);+#12852 = VERTEX_POINT('',#12853);+#12853 = CARTESIAN_POINT('',(3.832854330943,-3.63,1.059995970601));+#12854 = SURFACE_CURVE('',#12855,(#12859,#12866),.PCURVE_S1.);+#12855 = LINE('',#12856,#12857);+#12856 = CARTESIAN_POINT('',(3.780894551849,-3.63,1.150005036749));+#12857 = VECTOR('',#12858,1.);+#12858 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#12859 = PCURVE('',#12473,#12860);+#12860 = DEFINITIONAL_REPRESENTATION('',(#12861),#12865);+#12861 = LINE('',#12862,#12863);+#12862 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#12863 = VECTOR('',#12864,1.);+#12864 = DIRECTION('',(-0.866054481515,0.499949632511));+#12865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12866 = PCURVE('',#12867,#12872);+#12867 = PLANE('',#12868);+#12868 = AXIS2_PLACEMENT_3D('',#12869,#12870,#12871);+#12869 = CARTESIAN_POINT('',(3.832854330943,-3.81,1.059995970601));+#12870 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#12871 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#12872 = DEFINITIONAL_REPRESENTATION('',(#12873),#12877);+#12873 = LINE('',#12874,#12875);+#12874 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#12875 = VECTOR('',#12876,1.);+#12876 = DIRECTION('',(1.,0.));+#12877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12878 = ORIENTED_EDGE('',*,*,#12879,.F.);+#12879 = EDGE_CURVE('',#12880,#12852,#12882,.T.);+#12880 = VERTEX_POINT('',#12881);+#12881 = CARTESIAN_POINT('',(3.763569972422,-3.63,1.1));+#12882 = SURFACE_CURVE('',#12883,(#12888,#12895),.PCURVE_S1.);+#12883 = CIRCLE('',#12884,8.E-02);+#12884 = AXIS2_PLACEMENT_3D('',#12885,#12886,#12887);+#12885 = CARTESIAN_POINT('',(3.763569972422,-3.63,1.02));+#12886 = DIRECTION('',(0.,1.,0.));+#12887 = DIRECTION('',(0.,0.,1.));+#12888 = PCURVE('',#12473,#12889);+#12889 = DEFINITIONAL_REPRESENTATION('',(#12890),#12894);+#12890 = CIRCLE('',#12891,8.E-02);+#12891 = AXIS2_PLACEMENT_2D('',#12892,#12893);+#12892 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#12893 = DIRECTION('',(1.,0.));+#12894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12895 = PCURVE('',#12896,#12901);+#12896 = CYLINDRICAL_SURFACE('',#12897,8.E-02);+#12897 = AXIS2_PLACEMENT_3D('',#12898,#12899,#12900);+#12898 = CARTESIAN_POINT('',(3.763569972422,-3.81,1.02));+#12899 = DIRECTION('',(0.,1.,0.));+#12900 = DIRECTION('',(0.,0.,1.));+#12901 = DEFINITIONAL_REPRESENTATION('',(#12902),#12906);+#12902 = LINE('',#12903,#12904);+#12903 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#12904 = VECTOR('',#12905,1.);+#12905 = DIRECTION('',(1.,-0.));+#12906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12907 = ORIENTED_EDGE('',*,*,#12908,.F.);+#12908 = EDGE_CURVE('',#12909,#12880,#12911,.T.);+#12909 = VERTEX_POINT('',#12910);+#12910 = CARTESIAN_POINT('',(3.4975,-3.63,1.1));+#12911 = SURFACE_CURVE('',#12912,(#12916,#12923),.PCURVE_S1.);+#12912 = LINE('',#12913,#12914);+#12913 = CARTESIAN_POINT('',(3.4975,-3.63,1.1));+#12914 = VECTOR('',#12915,1.);+#12915 = DIRECTION('',(1.,0.,0.));+#12916 = PCURVE('',#12473,#12917);+#12917 = DEFINITIONAL_REPRESENTATION('',(#12918),#12922);+#12918 = LINE('',#12919,#12920);+#12919 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#12920 = VECTOR('',#12921,1.);+#12921 = DIRECTION('',(0.,1.));+#12922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12923 = PCURVE('',#12924,#12929);+#12924 = PLANE('',#12925);+#12925 = AXIS2_PLACEMENT_3D('',#12926,#12927,#12928);+#12926 = CARTESIAN_POINT('',(3.4975,-3.81,1.1));+#12927 = DIRECTION('',(0.,0.,1.));+#12928 = DIRECTION('',(1.,0.,0.));+#12929 = DEFINITIONAL_REPRESENTATION('',(#12930),#12934);+#12930 = LINE('',#12931,#12932);+#12931 = CARTESIAN_POINT('',(0.,0.18));+#12932 = VECTOR('',#12933,1.);+#12933 = DIRECTION('',(1.,0.));+#12934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12935 = ORIENTED_EDGE('',*,*,#12936,.F.);+#12936 = EDGE_CURVE('',#12937,#12909,#12939,.T.);+#12937 = VERTEX_POINT('',#12938);+#12938 = CARTESIAN_POINT('',(3.4475,-3.63,1.113397459622));+#12939 = SURFACE_CURVE('',#12940,(#12945,#12956),.PCURVE_S1.);+#12940 = CIRCLE('',#12941,0.1);+#12941 = AXIS2_PLACEMENT_3D('',#12942,#12943,#12944);+#12942 = CARTESIAN_POINT('',(3.4975,-3.63,1.2));+#12943 = DIRECTION('',(0.,-1.,0.));+#12944 = DIRECTION('',(1.,0.,0.));+#12945 = PCURVE('',#12473,#12946);+#12946 = DEFINITIONAL_REPRESENTATION('',(#12947),#12955);+#12947 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12948,#12949,#12950,#12951+ ,#12952,#12953,#12954),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12948 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12949 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#12950 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#12951 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#12952 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#12953 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#12954 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#12955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12956 = PCURVE('',#12957,#12962);+#12957 = CYLINDRICAL_SURFACE('',#12958,0.1);+#12958 = AXIS2_PLACEMENT_3D('',#12959,#12960,#12961);+#12959 = CARTESIAN_POINT('',(3.4975,-3.81,1.2));+#12960 = DIRECTION('',(0.,1.,0.));+#12961 = DIRECTION('',(1.,0.,0.));+#12962 = DEFINITIONAL_REPRESENTATION('',(#12963),#12967);+#12963 = LINE('',#12964,#12965);+#12964 = CARTESIAN_POINT('',(6.28318530718,0.18));+#12965 = VECTOR('',#12966,1.);+#12966 = DIRECTION('',(-1.,-0.));+#12967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12968 = ORIENTED_EDGE('',*,*,#12969,.F.);+#12969 = EDGE_CURVE('',#12452,#12937,#12970,.T.);+#12970 = SURFACE_CURVE('',#12971,(#12975,#12982),.PCURVE_S1.);+#12971 = LINE('',#12972,#12973);+#12972 = CARTESIAN_POINT('',(3.4475,-3.63,1.223081297441E-02));+#12973 = VECTOR('',#12974,1.);+#12974 = DIRECTION('',(0.,0.,-1.));+#12975 = PCURVE('',#12473,#12976);+#12976 = DEFINITIONAL_REPRESENTATION('',(#12977),#12981);+#12977 = LINE('',#12978,#12979);+#12978 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#12979 = VECTOR('',#12980,1.);+#12980 = DIRECTION('',(-1.,0.));+#12981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12982 = PCURVE('',#12505,#12983);+#12983 = DEFINITIONAL_REPRESENTATION('',(#12984),#12988);+#12984 = LINE('',#12985,#12986);+#12985 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#12986 = VECTOR('',#12987,1.);+#12987 = DIRECTION('',(-1.,0.));+#12988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12989 = ADVANCED_FACE('',(#12990),#12505,.F.);+#12990 = FACE_BOUND('',#12991,.F.);+#12991 = EDGE_LOOP('',(#12992,#12993,#13016,#13037));+#12992 = ORIENTED_EDGE('',*,*,#12489,.F.);+#12993 = ORIENTED_EDGE('',*,*,#12994,.T.);+#12994 = EDGE_CURVE('',#12490,#12995,#12997,.T.);+#12995 = VERTEX_POINT('',#12996);+#12996 = CARTESIAN_POINT('',(3.4475,-3.99,1.113397459622));+#12997 = SURFACE_CURVE('',#12998,(#13002,#13009),.PCURVE_S1.);+#12998 = LINE('',#12999,#13000);+#12999 = CARTESIAN_POINT('',(3.4475,-3.99,1.223081297441E-02));+#13000 = VECTOR('',#13001,1.);+#13001 = DIRECTION('',(0.,0.,-1.));+#13002 = PCURVE('',#12505,#13003);+#13003 = DEFINITIONAL_REPRESENTATION('',(#13004),#13008);+#13004 = LINE('',#13005,#13006);+#13005 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#13006 = VECTOR('',#13007,1.);+#13007 = DIRECTION('',(-1.,0.));+#13008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13009 = PCURVE('',#12534,#13010);+#13010 = DEFINITIONAL_REPRESENTATION('',(#13011),#13015);+#13011 = LINE('',#13012,#13013);+#13012 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#13013 = VECTOR('',#13014,1.);+#13014 = DIRECTION('',(-1.,0.));+#13015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13016 = ORIENTED_EDGE('',*,*,#13017,.T.);+#13017 = EDGE_CURVE('',#12995,#12937,#13018,.T.);+#13018 = SURFACE_CURVE('',#13019,(#13023,#13030),.PCURVE_S1.);+#13019 = LINE('',#13020,#13021);+#13020 = CARTESIAN_POINT('',(3.4475,-3.81,1.113397459622));+#13021 = VECTOR('',#13022,1.);+#13022 = DIRECTION('',(0.,1.,0.));+#13023 = PCURVE('',#12505,#13024);+#13024 = DEFINITIONAL_REPRESENTATION('',(#13025),#13029);+#13025 = LINE('',#13026,#13027);+#13026 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#13027 = VECTOR('',#13028,1.);+#13028 = DIRECTION('',(0.,-1.));+#13029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13030 = PCURVE('',#12957,#13031);+#13031 = DEFINITIONAL_REPRESENTATION('',(#13032),#13036);+#13032 = LINE('',#13033,#13034);+#13033 = CARTESIAN_POINT('',(2.094395102394,0.));+#13034 = VECTOR('',#13035,1.);+#13035 = DIRECTION('',(-0.,1.));+#13036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13037 = ORIENTED_EDGE('',*,*,#12969,.F.);+#13038 = ADVANCED_FACE('',(#13039),#12534,.F.);+#13039 = FACE_BOUND('',#13040,.F.);+#13040 = EDGE_LOOP('',(#13041,#13042,#13043,#13067,#13090,#13114,#13137,+ #13160,#13183,#13207,#13230,#13254,#13277,#13303));+#13041 = ORIENTED_EDGE('',*,*,#12517,.F.);+#13042 = ORIENTED_EDGE('',*,*,#12580,.T.);+#13043 = ORIENTED_EDGE('',*,*,#13044,.T.);+#13044 = EDGE_CURVE('',#12581,#13045,#13047,.T.);+#13045 = VERTEX_POINT('',#13046);+#13046 = CARTESIAN_POINT('',(4.006065227246,-3.99,1.159985897103));+#13047 = SURFACE_CURVE('',#13048,(#13053,#13060),.PCURVE_S1.);+#13048 = CIRCLE('',#13049,0.28);+#13049 = AXIS2_PLACEMENT_3D('',#13050,#13051,#13052);+#13050 = CARTESIAN_POINT('',(3.763569972422,-3.99,1.02));+#13051 = DIRECTION('',(0.,1.,0.));+#13052 = DIRECTION('',(0.,0.,1.));+#13053 = PCURVE('',#12534,#13054);+#13054 = DEFINITIONAL_REPRESENTATION('',(#13055),#13059);+#13055 = CIRCLE('',#13056,0.28);+#13056 = AXIS2_PLACEMENT_2D('',#13057,#13058);+#13057 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#13058 = DIRECTION('',(1.,0.));+#13059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13060 = PCURVE('',#12619,#13061);+#13061 = DEFINITIONAL_REPRESENTATION('',(#13062),#13066);+#13062 = LINE('',#13063,#13064);+#13063 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#13064 = VECTOR('',#13065,1.);+#13065 = DIRECTION('',(1.,0.));+#13066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13067 = ORIENTED_EDGE('',*,*,#13068,.T.);+#13068 = EDGE_CURVE('',#13045,#13069,#13071,.T.);+#13069 = VERTEX_POINT('',#13070);+#13070 = CARTESIAN_POINT('',(4.537145669057,-3.99,0.240004029399));+#13071 = SURFACE_CURVE('',#13072,(#13076,#13083),.PCURVE_S1.);+#13072 = LINE('',#13073,#13074);+#13073 = CARTESIAN_POINT('',(3.954105448151,-3.99,1.249994963251));+#13074 = VECTOR('',#13075,1.);+#13075 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#13076 = PCURVE('',#12534,#13077);+#13077 = DEFINITIONAL_REPRESENTATION('',(#13078),#13082);+#13078 = LINE('',#13079,#13080);+#13079 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#13080 = VECTOR('',#13081,1.);+#13081 = DIRECTION('',(-0.866054481515,0.499949632511));+#13082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13083 = PCURVE('',#12697,#13084);+#13084 = DEFINITIONAL_REPRESENTATION('',(#13085),#13089);+#13085 = LINE('',#13086,#13087);+#13086 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#13087 = VECTOR('',#13088,1.);+#13088 = DIRECTION('',(1.,0.));+#13089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13090 = ORIENTED_EDGE('',*,*,#13091,.F.);+#13091 = EDGE_CURVE('',#13092,#13069,#13094,.T.);+#13092 = VERTEX_POINT('',#13093);+#13093 = CARTESIAN_POINT('',(4.606430027578,-3.99,0.2));+#13094 = SURFACE_CURVE('',#13095,(#13100,#13107),.PCURVE_S1.);+#13095 = CIRCLE('',#13096,8.E-02);+#13096 = AXIS2_PLACEMENT_3D('',#13097,#13098,#13099);+#13097 = CARTESIAN_POINT('',(4.606430027578,-3.99,0.28));+#13098 = DIRECTION('',(0.,1.,0.));+#13099 = DIRECTION('',(0.,0.,1.));+#13100 = PCURVE('',#12534,#13101);+#13101 = DEFINITIONAL_REPRESENTATION('',(#13102),#13106);+#13102 = CIRCLE('',#13103,8.E-02);+#13103 = AXIS2_PLACEMENT_2D('',#13104,#13105);+#13104 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#13105 = DIRECTION('',(1.,0.));+#13106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13107 = PCURVE('',#12726,#13108);+#13108 = DEFINITIONAL_REPRESENTATION('',(#13109),#13113);+#13109 = LINE('',#13110,#13111);+#13110 = CARTESIAN_POINT('',(0.,-0.18));+#13111 = VECTOR('',#13112,1.);+#13112 = DIRECTION('',(1.,0.));+#13113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13114 = ORIENTED_EDGE('',*,*,#13115,.T.);+#13115 = EDGE_CURVE('',#13092,#13116,#13118,.T.);+#13116 = VERTEX_POINT('',#13117);+#13117 = CARTESIAN_POINT('',(5.255,-3.99,0.2));+#13118 = SURFACE_CURVE('',#13119,(#13123,#13130),.PCURVE_S1.);+#13119 = LINE('',#13120,#13121);+#13120 = CARTESIAN_POINT('',(4.5025,-3.99,0.2));+#13121 = VECTOR('',#13122,1.);+#13122 = DIRECTION('',(1.,0.,0.));+#13123 = PCURVE('',#12534,#13124);+#13124 = DEFINITIONAL_REPRESENTATION('',(#13125),#13129);+#13125 = LINE('',#13126,#13127);+#13126 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#13127 = VECTOR('',#13128,1.);+#13128 = DIRECTION('',(0.,1.));+#13129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13130 = PCURVE('',#12754,#13131);+#13131 = DEFINITIONAL_REPRESENTATION('',(#13132),#13136);+#13132 = LINE('',#13133,#13134);+#13133 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#13134 = VECTOR('',#13135,1.);+#13135 = DIRECTION('',(1.,0.));+#13136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13137 = ORIENTED_EDGE('',*,*,#13138,.T.);+#13138 = EDGE_CURVE('',#13116,#13139,#13141,.T.);+#13139 = VERTEX_POINT('',#13140);+#13140 = CARTESIAN_POINT('',(5.255,-3.99,0.));+#13141 = SURFACE_CURVE('',#13142,(#13146,#13153),.PCURVE_S1.);+#13142 = LINE('',#13143,#13144);+#13143 = CARTESIAN_POINT('',(5.255,-3.99,1.223081297441E-02));+#13144 = VECTOR('',#13145,1.);+#13145 = DIRECTION('',(0.,0.,-1.));+#13146 = PCURVE('',#12534,#13147);+#13147 = DEFINITIONAL_REPRESENTATION('',(#13148),#13152);+#13148 = LINE('',#13149,#13150);+#13149 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#13150 = VECTOR('',#13151,1.);+#13151 = DIRECTION('',(-1.,0.));+#13152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13153 = PCURVE('',#12782,#13154);+#13154 = DEFINITIONAL_REPRESENTATION('',(#13155),#13159);+#13155 = LINE('',#13156,#13157);+#13156 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#13157 = VECTOR('',#13158,1.);+#13158 = DIRECTION('',(-1.,0.));+#13159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13160 = ORIENTED_EDGE('',*,*,#13161,.F.);+#13161 = EDGE_CURVE('',#13162,#13139,#13164,.T.);+#13162 = VERTEX_POINT('',#13163);+#13163 = CARTESIAN_POINT('',(4.606430027578,-3.99,-5.551115123126E-17));+#13164 = SURFACE_CURVE('',#13165,(#13169,#13176),.PCURVE_S1.);+#13165 = LINE('',#13166,#13167);+#13166 = CARTESIAN_POINT('',(4.5025,-3.99,0.));+#13167 = VECTOR('',#13168,1.);+#13168 = DIRECTION('',(1.,0.,0.));+#13169 = PCURVE('',#12534,#13170);+#13170 = DEFINITIONAL_REPRESENTATION('',(#13171),#13175);+#13171 = LINE('',#13172,#13173);+#13172 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#13173 = VECTOR('',#13174,1.);+#13174 = DIRECTION('',(0.,1.));+#13175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13176 = PCURVE('',#12810,#13177);+#13177 = DEFINITIONAL_REPRESENTATION('',(#13178),#13182);+#13178 = LINE('',#13179,#13180);+#13179 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#13180 = VECTOR('',#13181,1.);+#13181 = DIRECTION('',(1.,0.));+#13182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13183 = ORIENTED_EDGE('',*,*,#13184,.T.);+#13184 = EDGE_CURVE('',#13162,#13185,#13187,.T.);+#13185 = VERTEX_POINT('',#13186);+#13186 = CARTESIAN_POINT('',(4.363934772754,-3.99,0.140014102897));+#13187 = SURFACE_CURVE('',#13188,(#13193,#13200),.PCURVE_S1.);+#13188 = CIRCLE('',#13189,0.28);+#13189 = AXIS2_PLACEMENT_3D('',#13190,#13191,#13192);+#13190 = CARTESIAN_POINT('',(4.606430027578,-3.99,0.28));+#13191 = DIRECTION('',(0.,1.,0.));+#13192 = DIRECTION('',(0.,0.,1.));+#13193 = PCURVE('',#12534,#13194);+#13194 = DEFINITIONAL_REPRESENTATION('',(#13195),#13199);+#13195 = CIRCLE('',#13196,0.28);+#13196 = AXIS2_PLACEMENT_2D('',#13197,#13198);+#13197 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#13198 = DIRECTION('',(1.,0.));+#13199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13200 = PCURVE('',#12839,#13201);+#13201 = DEFINITIONAL_REPRESENTATION('',(#13202),#13206);+#13202 = LINE('',#13203,#13204);+#13203 = CARTESIAN_POINT('',(0.,-0.18));+#13204 = VECTOR('',#13205,1.);+#13205 = DIRECTION('',(1.,0.));+#13206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13207 = ORIENTED_EDGE('',*,*,#13208,.F.);+#13208 = EDGE_CURVE('',#13209,#13185,#13211,.T.);+#13209 = VERTEX_POINT('',#13210);+#13210 = CARTESIAN_POINT('',(3.832854330943,-3.99,1.059995970601));+#13211 = SURFACE_CURVE('',#13212,(#13216,#13223),.PCURVE_S1.);+#13212 = LINE('',#13213,#13214);+#13213 = CARTESIAN_POINT('',(3.780894551849,-3.99,1.150005036749));+#13214 = VECTOR('',#13215,1.);+#13215 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#13216 = PCURVE('',#12534,#13217);+#13217 = DEFINITIONAL_REPRESENTATION('',(#13218),#13222);+#13218 = LINE('',#13219,#13220);+#13219 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#13220 = VECTOR('',#13221,1.);+#13221 = DIRECTION('',(-0.866054481515,0.499949632511));+#13222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13223 = PCURVE('',#12867,#13224);+#13224 = DEFINITIONAL_REPRESENTATION('',(#13225),#13229);+#13225 = LINE('',#13226,#13227);+#13226 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#13227 = VECTOR('',#13228,1.);+#13228 = DIRECTION('',(1.,0.));+#13229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13230 = ORIENTED_EDGE('',*,*,#13231,.F.);+#13231 = EDGE_CURVE('',#13232,#13209,#13234,.T.);+#13232 = VERTEX_POINT('',#13233);+#13233 = CARTESIAN_POINT('',(3.763569972422,-3.99,1.1));+#13234 = SURFACE_CURVE('',#13235,(#13240,#13247),.PCURVE_S1.);+#13235 = CIRCLE('',#13236,8.E-02);+#13236 = AXIS2_PLACEMENT_3D('',#13237,#13238,#13239);+#13237 = CARTESIAN_POINT('',(3.763569972422,-3.99,1.02));+#13238 = DIRECTION('',(0.,1.,0.));+#13239 = DIRECTION('',(0.,0.,1.));+#13240 = PCURVE('',#12534,#13241);+#13241 = DEFINITIONAL_REPRESENTATION('',(#13242),#13246);+#13242 = CIRCLE('',#13243,8.E-02);+#13243 = AXIS2_PLACEMENT_2D('',#13244,#13245);+#13244 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#13245 = DIRECTION('',(1.,0.));+#13246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13247 = PCURVE('',#12896,#13248);+#13248 = DEFINITIONAL_REPRESENTATION('',(#13249),#13253);+#13249 = LINE('',#13250,#13251);+#13250 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#13251 = VECTOR('',#13252,1.);+#13252 = DIRECTION('',(1.,0.));+#13253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13254 = ORIENTED_EDGE('',*,*,#13255,.F.);+#13255 = EDGE_CURVE('',#13256,#13232,#13258,.T.);+#13256 = VERTEX_POINT('',#13257);+#13257 = CARTESIAN_POINT('',(3.4975,-3.99,1.1));+#13258 = SURFACE_CURVE('',#13259,(#13263,#13270),.PCURVE_S1.);+#13259 = LINE('',#13260,#13261);+#13260 = CARTESIAN_POINT('',(3.4975,-3.99,1.1));+#13261 = VECTOR('',#13262,1.);+#13262 = DIRECTION('',(1.,0.,0.));+#13263 = PCURVE('',#12534,#13264);+#13264 = DEFINITIONAL_REPRESENTATION('',(#13265),#13269);+#13265 = LINE('',#13266,#13267);+#13266 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#13267 = VECTOR('',#13268,1.);+#13268 = DIRECTION('',(0.,1.));+#13269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13270 = PCURVE('',#12924,#13271);+#13271 = DEFINITIONAL_REPRESENTATION('',(#13272),#13276);+#13272 = LINE('',#13273,#13274);+#13273 = CARTESIAN_POINT('',(0.,-0.18));+#13274 = VECTOR('',#13275,1.);+#13275 = DIRECTION('',(1.,0.));+#13276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13277 = ORIENTED_EDGE('',*,*,#13278,.F.);+#13278 = EDGE_CURVE('',#12995,#13256,#13279,.T.);+#13279 = SURFACE_CURVE('',#13280,(#13285,#13296),.PCURVE_S1.);+#13280 = CIRCLE('',#13281,0.1);+#13281 = AXIS2_PLACEMENT_3D('',#13282,#13283,#13284);+#13282 = CARTESIAN_POINT('',(3.4975,-3.99,1.2));+#13283 = DIRECTION('',(0.,-1.,0.));+#13284 = DIRECTION('',(1.,0.,0.));+#13285 = PCURVE('',#12534,#13286);+#13286 = DEFINITIONAL_REPRESENTATION('',(#13287),#13295);+#13287 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13288,#13289,#13290,#13291+ ,#13292,#13293,#13294),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13288 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13289 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#13290 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#13291 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#13292 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#13293 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#13294 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13296 = PCURVE('',#12957,#13297);+#13297 = DEFINITIONAL_REPRESENTATION('',(#13298),#13302);+#13298 = LINE('',#13299,#13300);+#13299 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#13300 = VECTOR('',#13301,1.);+#13301 = DIRECTION('',(-1.,0.));+#13302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13303 = ORIENTED_EDGE('',*,*,#12994,.F.);+#13304 = ADVANCED_FACE('',(#13305),#12619,.T.);+#13305 = FACE_BOUND('',#13306,.T.);+#13306 = EDGE_LOOP('',(#13307,#13308,#13309,#13330));+#13307 = ORIENTED_EDGE('',*,*,#12603,.F.);+#13308 = ORIENTED_EDGE('',*,*,#13044,.T.);+#13309 = ORIENTED_EDGE('',*,*,#13310,.T.);+#13310 = EDGE_CURVE('',#13045,#12658,#13311,.T.);+#13311 = SURFACE_CURVE('',#13312,(#13316,#13323),.PCURVE_S1.);+#13312 = LINE('',#13313,#13314);+#13313 = CARTESIAN_POINT('',(4.006065227246,-3.99,1.159985897103));+#13314 = VECTOR('',#13315,1.);+#13315 = DIRECTION('',(0.,1.,0.));+#13316 = PCURVE('',#12619,#13317);+#13317 = DEFINITIONAL_REPRESENTATION('',(#13318),#13322);+#13318 = LINE('',#13319,#13320);+#13319 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#13320 = VECTOR('',#13321,1.);+#13321 = DIRECTION('',(-0.,1.));+#13322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13323 = PCURVE('',#12697,#13324);+#13324 = DEFINITIONAL_REPRESENTATION('',(#13325),#13329);+#13325 = LINE('',#13326,#13327);+#13326 = CARTESIAN_POINT('',(0.,-0.18));+#13327 = VECTOR('',#13328,1.);+#13328 = DIRECTION('',(0.,1.));+#13329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13330 = ORIENTED_EDGE('',*,*,#12657,.F.);+#13331 = ADVANCED_FACE('',(#13332),#12957,.T.);+#13332 = FACE_BOUND('',#13333,.T.);+#13333 = EDGE_LOOP('',(#13334,#13335,#13356,#13357));+#13334 = ORIENTED_EDGE('',*,*,#12936,.T.);+#13335 = ORIENTED_EDGE('',*,*,#13336,.T.);+#13336 = EDGE_CURVE('',#12909,#13256,#13337,.T.);+#13337 = SURFACE_CURVE('',#13338,(#13342,#13349),.PCURVE_S1.);+#13338 = LINE('',#13339,#13340);+#13339 = CARTESIAN_POINT('',(3.4975,-3.63,1.1));+#13340 = VECTOR('',#13341,1.);+#13341 = DIRECTION('',(0.,-1.,0.));+#13342 = PCURVE('',#12957,#13343);+#13343 = DEFINITIONAL_REPRESENTATION('',(#13344),#13348);+#13344 = LINE('',#13345,#13346);+#13345 = CARTESIAN_POINT('',(1.570796326795,0.18));+#13346 = VECTOR('',#13347,1.);+#13347 = DIRECTION('',(-0.,-1.));+#13348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13349 = PCURVE('',#12924,#13350);+#13350 = DEFINITIONAL_REPRESENTATION('',(#13351),#13355);+#13351 = LINE('',#13352,#13353);+#13352 = CARTESIAN_POINT('',(0.,0.18));+#13353 = VECTOR('',#13354,1.);+#13354 = DIRECTION('',(0.,-1.));+#13355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13356 = ORIENTED_EDGE('',*,*,#13278,.F.);+#13357 = ORIENTED_EDGE('',*,*,#13017,.T.);+#13358 = ADVANCED_FACE('',(#13359),#12924,.F.);+#13359 = FACE_BOUND('',#13360,.F.);+#13360 = EDGE_LOOP('',(#13361,#13362,#13383,#13384));+#13361 = ORIENTED_EDGE('',*,*,#13255,.T.);+#13362 = ORIENTED_EDGE('',*,*,#13363,.F.);+#13363 = EDGE_CURVE('',#12880,#13232,#13364,.T.);+#13364 = SURFACE_CURVE('',#13365,(#13369,#13376),.PCURVE_S1.);+#13365 = LINE('',#13366,#13367);+#13366 = CARTESIAN_POINT('',(3.763569972422,-3.63,1.1));+#13367 = VECTOR('',#13368,1.);+#13368 = DIRECTION('',(0.,-1.,0.));+#13369 = PCURVE('',#12924,#13370);+#13370 = DEFINITIONAL_REPRESENTATION('',(#13371),#13375);+#13371 = LINE('',#13372,#13373);+#13372 = CARTESIAN_POINT('',(0.266069972422,0.18));+#13373 = VECTOR('',#13374,1.);+#13374 = DIRECTION('',(0.,-1.));+#13375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13376 = PCURVE('',#12896,#13377);+#13377 = DEFINITIONAL_REPRESENTATION('',(#13378),#13382);+#13378 = LINE('',#13379,#13380);+#13379 = CARTESIAN_POINT('',(0.,0.18));+#13380 = VECTOR('',#13381,1.);+#13381 = DIRECTION('',(0.,-1.));+#13382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13383 = ORIENTED_EDGE('',*,*,#12908,.F.);+#13384 = ORIENTED_EDGE('',*,*,#13336,.T.);+#13385 = ADVANCED_FACE('',(#13386),#12896,.F.);+#13386 = FACE_BOUND('',#13387,.F.);+#13387 = EDGE_LOOP('',(#13388,#13389,#13410,#13411));+#13388 = ORIENTED_EDGE('',*,*,#13231,.T.);+#13389 = ORIENTED_EDGE('',*,*,#13390,.F.);+#13390 = EDGE_CURVE('',#12852,#13209,#13391,.T.);+#13391 = SURFACE_CURVE('',#13392,(#13396,#13403),.PCURVE_S1.);+#13392 = LINE('',#13393,#13394);+#13393 = CARTESIAN_POINT('',(3.832854330943,-3.63,1.059995970601));+#13394 = VECTOR('',#13395,1.);+#13395 = DIRECTION('',(0.,-1.,0.));+#13396 = PCURVE('',#12896,#13397);+#13397 = DEFINITIONAL_REPRESENTATION('',(#13398),#13402);+#13398 = LINE('',#13399,#13400);+#13399 = CARTESIAN_POINT('',(1.047255709587,0.18));+#13400 = VECTOR('',#13401,1.);+#13401 = DIRECTION('',(0.,-1.));+#13402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13403 = PCURVE('',#12867,#13404);+#13404 = DEFINITIONAL_REPRESENTATION('',(#13405),#13409);+#13405 = LINE('',#13406,#13407);+#13406 = CARTESIAN_POINT('',(0.,0.18));+#13407 = VECTOR('',#13408,1.);+#13408 = DIRECTION('',(0.,-1.));+#13409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13410 = ORIENTED_EDGE('',*,*,#12879,.F.);+#13411 = ORIENTED_EDGE('',*,*,#13363,.T.);+#13412 = ADVANCED_FACE('',(#13413),#12867,.F.);+#13413 = FACE_BOUND('',#13414,.F.);+#13414 = EDGE_LOOP('',(#13415,#13416,#13437,#13438));+#13415 = ORIENTED_EDGE('',*,*,#13208,.T.);+#13416 = ORIENTED_EDGE('',*,*,#13417,.F.);+#13417 = EDGE_CURVE('',#12823,#13185,#13418,.T.);+#13418 = SURFACE_CURVE('',#13419,(#13423,#13430),.PCURVE_S1.);+#13419 = LINE('',#13420,#13421);+#13420 = CARTESIAN_POINT('',(4.363934772754,-3.63,0.140014102897));+#13421 = VECTOR('',#13422,1.);+#13422 = DIRECTION('',(0.,-1.,0.));+#13423 = PCURVE('',#12867,#13424);+#13424 = DEFINITIONAL_REPRESENTATION('',(#13425),#13429);+#13425 = LINE('',#13426,#13427);+#13426 = CARTESIAN_POINT('',(1.062267891155,0.18));+#13427 = VECTOR('',#13428,1.);+#13428 = DIRECTION('',(0.,-1.));+#13429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13430 = PCURVE('',#12839,#13431);+#13431 = DEFINITIONAL_REPRESENTATION('',(#13432),#13436);+#13432 = LINE('',#13433,#13434);+#13433 = CARTESIAN_POINT('',(4.188848363177,0.18));+#13434 = VECTOR('',#13435,1.);+#13435 = DIRECTION('',(0.,-1.));+#13436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13437 = ORIENTED_EDGE('',*,*,#12851,.F.);+#13438 = ORIENTED_EDGE('',*,*,#13390,.T.);+#13439 = ADVANCED_FACE('',(#13440),#12839,.T.);+#13440 = FACE_BOUND('',#13441,.T.);+#13441 = EDGE_LOOP('',(#13442,#13443,#13444,#13445));+#13442 = ORIENTED_EDGE('',*,*,#13184,.T.);+#13443 = ORIENTED_EDGE('',*,*,#13417,.F.);+#13444 = ORIENTED_EDGE('',*,*,#12822,.F.);+#13445 = ORIENTED_EDGE('',*,*,#13446,.T.);+#13446 = EDGE_CURVE('',#12795,#13162,#13447,.T.);+#13447 = SURFACE_CURVE('',#13448,(#13452,#13459),.PCURVE_S1.);+#13448 = LINE('',#13449,#13450);+#13449 = CARTESIAN_POINT('',(4.606430027578,-3.63,-5.551115123126E-17));+#13450 = VECTOR('',#13451,1.);+#13451 = DIRECTION('',(0.,-1.,0.));+#13452 = PCURVE('',#12839,#13453);+#13453 = DEFINITIONAL_REPRESENTATION('',(#13454),#13458);+#13454 = LINE('',#13455,#13456);+#13455 = CARTESIAN_POINT('',(3.14159265359,0.18));+#13456 = VECTOR('',#13457,1.);+#13457 = DIRECTION('',(0.,-1.));+#13458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13459 = PCURVE('',#12810,#13460);+#13460 = DEFINITIONAL_REPRESENTATION('',(#13461),#13465);+#13461 = LINE('',#13462,#13463);+#13462 = CARTESIAN_POINT('',(0.,0.18));+#13463 = VECTOR('',#13464,1.);+#13464 = DIRECTION('',(0.,-1.));+#13465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13466 = ADVANCED_FACE('',(#13467),#12810,.F.);+#13467 = FACE_BOUND('',#13468,.F.);+#13468 = EDGE_LOOP('',(#13469,#13470,#13471,#13492));+#13469 = ORIENTED_EDGE('',*,*,#13446,.T.);+#13470 = ORIENTED_EDGE('',*,*,#13161,.T.);+#13471 = ORIENTED_EDGE('',*,*,#13472,.T.);+#13472 = EDGE_CURVE('',#13139,#12767,#13473,.T.);+#13473 = SURFACE_CURVE('',#13474,(#13478,#13485),.PCURVE_S1.);+#13474 = LINE('',#13475,#13476);+#13475 = CARTESIAN_POINT('',(5.255,-4.15,0.));+#13476 = VECTOR('',#13477,1.);+#13477 = DIRECTION('',(0.,1.,0.));+#13478 = PCURVE('',#12810,#13479);+#13479 = DEFINITIONAL_REPRESENTATION('',(#13480),#13484);+#13480 = LINE('',#13481,#13482);+#13481 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#13482 = VECTOR('',#13483,1.);+#13483 = DIRECTION('',(0.,1.));+#13484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13485 = PCURVE('',#12782,#13486);+#13486 = DEFINITIONAL_REPRESENTATION('',(#13487),#13491);+#13487 = LINE('',#13488,#13489);+#13488 = CARTESIAN_POINT('',(0.5,-0.34));+#13489 = VECTOR('',#13490,1.);+#13490 = DIRECTION('',(0.,-1.));+#13491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13492 = ORIENTED_EDGE('',*,*,#12794,.F.);+#13493 = ADVANCED_FACE('',(#13494),#12782,.T.);+#13494 = FACE_BOUND('',#13495,.T.);+#13495 = EDGE_LOOP('',(#13496,#13517,#13518,#13519));+#13496 = ORIENTED_EDGE('',*,*,#13497,.F.);+#13497 = EDGE_CURVE('',#13116,#12739,#13498,.T.);+#13498 = SURFACE_CURVE('',#13499,(#13503,#13510),.PCURVE_S1.);+#13499 = LINE('',#13500,#13501);+#13500 = CARTESIAN_POINT('',(5.255,-4.15,0.2));+#13501 = VECTOR('',#13502,1.);+#13502 = DIRECTION('',(0.,1.,0.));+#13503 = PCURVE('',#12782,#13504);+#13504 = DEFINITIONAL_REPRESENTATION('',(#13505),#13509);+#13505 = LINE('',#13506,#13507);+#13506 = CARTESIAN_POINT('',(0.7,-0.34));+#13507 = VECTOR('',#13508,1.);+#13508 = DIRECTION('',(0.,-1.));+#13509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13510 = PCURVE('',#12754,#13511);+#13511 = DEFINITIONAL_REPRESENTATION('',(#13512),#13516);+#13512 = LINE('',#13513,#13514);+#13513 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#13514 = VECTOR('',#13515,1.);+#13515 = DIRECTION('',(0.,1.));+#13516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13517 = ORIENTED_EDGE('',*,*,#13138,.T.);+#13518 = ORIENTED_EDGE('',*,*,#13472,.T.);+#13519 = ORIENTED_EDGE('',*,*,#12766,.F.);+#13520 = ADVANCED_FACE('',(#13521),#12754,.T.);+#13521 = FACE_BOUND('',#13522,.T.);+#13522 = EDGE_LOOP('',(#13523,#13544,#13545,#13546));+#13523 = ORIENTED_EDGE('',*,*,#13524,.T.);+#13524 = EDGE_CURVE('',#12710,#13092,#13525,.T.);+#13525 = SURFACE_CURVE('',#13526,(#13530,#13537),.PCURVE_S1.);+#13526 = LINE('',#13527,#13528);+#13527 = CARTESIAN_POINT('',(4.606430027578,-3.63,0.2));+#13528 = VECTOR('',#13529,1.);+#13529 = DIRECTION('',(0.,-1.,0.));+#13530 = PCURVE('',#12754,#13531);+#13531 = DEFINITIONAL_REPRESENTATION('',(#13532),#13536);+#13532 = LINE('',#13533,#13534);+#13533 = CARTESIAN_POINT('',(0.,0.18));+#13534 = VECTOR('',#13535,1.);+#13535 = DIRECTION('',(0.,-1.));+#13536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13537 = PCURVE('',#12726,#13538);+#13538 = DEFINITIONAL_REPRESENTATION('',(#13539),#13543);+#13539 = LINE('',#13540,#13541);+#13540 = CARTESIAN_POINT('',(3.14159265359,0.18));+#13541 = VECTOR('',#13542,1.);+#13542 = DIRECTION('',(0.,-1.));+#13543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13544 = ORIENTED_EDGE('',*,*,#13115,.T.);+#13545 = ORIENTED_EDGE('',*,*,#13497,.T.);+#13546 = ORIENTED_EDGE('',*,*,#12738,.F.);+#13547 = ADVANCED_FACE('',(#13548),#12726,.F.);+#13548 = FACE_BOUND('',#13549,.F.);+#13549 = EDGE_LOOP('',(#13550,#13551,#13572,#13573));+#13550 = ORIENTED_EDGE('',*,*,#13091,.T.);+#13551 = ORIENTED_EDGE('',*,*,#13552,.F.);+#13552 = EDGE_CURVE('',#12682,#13069,#13553,.T.);+#13553 = SURFACE_CURVE('',#13554,(#13558,#13565),.PCURVE_S1.);+#13554 = LINE('',#13555,#13556);+#13555 = CARTESIAN_POINT('',(4.537145669057,-3.63,0.240004029399));+#13556 = VECTOR('',#13557,1.);+#13557 = DIRECTION('',(0.,-1.,0.));+#13558 = PCURVE('',#12726,#13559);+#13559 = DEFINITIONAL_REPRESENTATION('',(#13560),#13564);+#13560 = LINE('',#13561,#13562);+#13561 = CARTESIAN_POINT('',(4.188848363177,0.18));+#13562 = VECTOR('',#13563,1.);+#13563 = DIRECTION('',(0.,-1.));+#13564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13565 = PCURVE('',#12697,#13566);+#13566 = DEFINITIONAL_REPRESENTATION('',(#13567),#13571);+#13567 = LINE('',#13568,#13569);+#13568 = CARTESIAN_POINT('',(1.062267891155,0.18));+#13569 = VECTOR('',#13570,1.);+#13570 = DIRECTION('',(0.,-1.));+#13571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13572 = ORIENTED_EDGE('',*,*,#12709,.F.);+#13573 = ORIENTED_EDGE('',*,*,#13524,.T.);+#13574 = ADVANCED_FACE('',(#13575),#12697,.T.);+#13575 = FACE_BOUND('',#13576,.T.);+#13576 = EDGE_LOOP('',(#13577,#13578,#13579,#13580));+#13577 = ORIENTED_EDGE('',*,*,#13310,.F.);+#13578 = ORIENTED_EDGE('',*,*,#13068,.T.);+#13579 = ORIENTED_EDGE('',*,*,#13552,.F.);+#13580 = ORIENTED_EDGE('',*,*,#12681,.F.);+#13581 = MANIFOLD_SOLID_BREP('',#13582);+#13582 = CLOSED_SHELL('',(#13583,#13713,#13789,#14127,#14176,#14442,+ #14469,#14496,#14523,#14550,#14577,#14604,#14631,#14658,#14685,+ #14712));+#13583 = ADVANCED_FACE('',(#13584),#13599,.T.);+#13584 = FACE_BOUND('',#13585,.T.);+#13585 = EDGE_LOOP('',(#13586,#13626,#13654,#13687));+#13586 = ORIENTED_EDGE('',*,*,#13587,.T.);+#13587 = EDGE_CURVE('',#13588,#13590,#13592,.T.);+#13588 = VERTEX_POINT('',#13589);+#13589 = CARTESIAN_POINT('',(3.4975,-2.36,1.3));+#13590 = VERTEX_POINT('',#13591);+#13591 = CARTESIAN_POINT('',(3.4475,-2.36,1.286602540378));+#13592 = SURFACE_CURVE('',#13593,(#13598,#13610),.PCURVE_S1.);+#13593 = CIRCLE('',#13594,0.1);+#13594 = AXIS2_PLACEMENT_3D('',#13595,#13596,#13597);+#13595 = CARTESIAN_POINT('',(3.4975,-2.36,1.2));+#13596 = DIRECTION('',(0.,-1.,0.));+#13597 = DIRECTION('',(1.,0.,0.));+#13598 = PCURVE('',#13599,#13604);+#13599 = CYLINDRICAL_SURFACE('',#13600,0.1);+#13600 = AXIS2_PLACEMENT_3D('',#13601,#13602,#13603);+#13601 = CARTESIAN_POINT('',(3.4975,-2.54,1.2));+#13602 = DIRECTION('',(0.,1.,0.));+#13603 = DIRECTION('',(1.,0.,0.));+#13604 = DEFINITIONAL_REPRESENTATION('',(#13605),#13609);+#13605 = LINE('',#13606,#13607);+#13606 = CARTESIAN_POINT('',(6.28318530718,0.18));+#13607 = VECTOR('',#13608,1.);+#13608 = DIRECTION('',(-1.,-0.));+#13609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13610 = PCURVE('',#13611,#13616);+#13611 = PLANE('',#13612);+#13612 = AXIS2_PLACEMENT_3D('',#13613,#13614,#13615);+#13613 = CARTESIAN_POINT('',(4.408401242914,-2.36,0.524461625949));+#13614 = DIRECTION('',(0.,1.,0.));+#13615 = DIRECTION('',(0.,0.,1.));+#13616 = DEFINITIONAL_REPRESENTATION('',(#13617),#13625);+#13617 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13618,#13619,#13620,#13621+ ,#13622,#13623,#13624),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13618 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13619 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#13620 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#13621 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#13622 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#13623 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#13624 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13626 = ORIENTED_EDGE('',*,*,#13627,.F.);+#13627 = EDGE_CURVE('',#13628,#13590,#13630,.T.);+#13628 = VERTEX_POINT('',#13629);+#13629 = CARTESIAN_POINT('',(3.4475,-2.72,1.286602540378));+#13630 = SURFACE_CURVE('',#13631,(#13635,#13642),.PCURVE_S1.);+#13631 = LINE('',#13632,#13633);+#13632 = CARTESIAN_POINT('',(3.4475,-2.54,1.286602540378));+#13633 = VECTOR('',#13634,1.);+#13634 = DIRECTION('',(0.,1.,0.));+#13635 = PCURVE('',#13599,#13636);+#13636 = DEFINITIONAL_REPRESENTATION('',(#13637),#13641);+#13637 = LINE('',#13638,#13639);+#13638 = CARTESIAN_POINT('',(4.188790204787,0.));+#13639 = VECTOR('',#13640,1.);+#13640 = DIRECTION('',(-0.,1.));+#13641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13642 = PCURVE('',#13643,#13648);+#13643 = PLANE('',#13644);+#13644 = AXIS2_PLACEMENT_3D('',#13645,#13646,#13647);+#13645 = CARTESIAN_POINT('',(3.4475,-3.22,-0.5));+#13646 = DIRECTION('',(1.,0.,0.));+#13647 = DIRECTION('',(0.,0.,1.));+#13648 = DEFINITIONAL_REPRESENTATION('',(#13649),#13653);+#13649 = LINE('',#13650,#13651);+#13650 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#13651 = VECTOR('',#13652,1.);+#13652 = DIRECTION('',(0.,-1.));+#13653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13654 = ORIENTED_EDGE('',*,*,#13655,.F.);+#13655 = EDGE_CURVE('',#13656,#13628,#13658,.T.);+#13656 = VERTEX_POINT('',#13657);+#13657 = CARTESIAN_POINT('',(3.4975,-2.72,1.3));+#13658 = SURFACE_CURVE('',#13659,(#13664,#13671),.PCURVE_S1.);+#13659 = CIRCLE('',#13660,0.1);+#13660 = AXIS2_PLACEMENT_3D('',#13661,#13662,#13663);+#13661 = CARTESIAN_POINT('',(3.4975,-2.72,1.2));+#13662 = DIRECTION('',(0.,-1.,0.));+#13663 = DIRECTION('',(1.,0.,0.));+#13664 = PCURVE('',#13599,#13665);+#13665 = DEFINITIONAL_REPRESENTATION('',(#13666),#13670);+#13666 = LINE('',#13667,#13668);+#13667 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#13668 = VECTOR('',#13669,1.);+#13669 = DIRECTION('',(-1.,0.));+#13670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13671 = PCURVE('',#13672,#13677);+#13672 = PLANE('',#13673);+#13673 = AXIS2_PLACEMENT_3D('',#13674,#13675,#13676);+#13674 = CARTESIAN_POINT('',(4.408401242914,-2.72,0.524461625949));+#13675 = DIRECTION('',(0.,1.,0.));+#13676 = DIRECTION('',(0.,0.,1.));+#13677 = DEFINITIONAL_REPRESENTATION('',(#13678),#13686);+#13678 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13679,#13680,#13681,#13682+ ,#13683,#13684,#13685),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13679 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13680 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#13681 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#13682 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#13683 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#13684 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#13685 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#13686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13687 = ORIENTED_EDGE('',*,*,#13688,.T.);+#13688 = EDGE_CURVE('',#13656,#13588,#13689,.T.);+#13689 = SURFACE_CURVE('',#13690,(#13694,#13701),.PCURVE_S1.);+#13690 = LINE('',#13691,#13692);+#13691 = CARTESIAN_POINT('',(3.4975,-2.72,1.3));+#13692 = VECTOR('',#13693,1.);+#13693 = DIRECTION('',(0.,1.,0.));+#13694 = PCURVE('',#13599,#13695);+#13695 = DEFINITIONAL_REPRESENTATION('',(#13696),#13700);+#13696 = LINE('',#13697,#13698);+#13697 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#13698 = VECTOR('',#13699,1.);+#13699 = DIRECTION('',(0.,1.));+#13700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13701 = PCURVE('',#13702,#13707);+#13702 = PLANE('',#13703);+#13703 = AXIS2_PLACEMENT_3D('',#13704,#13705,#13706);+#13704 = CARTESIAN_POINT('',(3.4975,-2.54,1.3));+#13705 = DIRECTION('',(0.,0.,1.));+#13706 = DIRECTION('',(1.,0.,0.));+#13707 = DEFINITIONAL_REPRESENTATION('',(#13708),#13712);+#13708 = LINE('',#13709,#13710);+#13709 = CARTESIAN_POINT('',(0.,-0.18));+#13710 = VECTOR('',#13711,1.);+#13711 = DIRECTION('',(0.,1.));+#13712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13713 = ADVANCED_FACE('',(#13714),#13702,.T.);+#13714 = FACE_BOUND('',#13715,.T.);+#13715 = EDGE_LOOP('',(#13716,#13717,#13740,#13768));+#13716 = ORIENTED_EDGE('',*,*,#13688,.F.);+#13717 = ORIENTED_EDGE('',*,*,#13718,.T.);+#13718 = EDGE_CURVE('',#13656,#13719,#13721,.T.);+#13719 = VERTEX_POINT('',#13720);+#13720 = CARTESIAN_POINT('',(3.763569972422,-2.72,1.3));+#13721 = SURFACE_CURVE('',#13722,(#13726,#13733),.PCURVE_S1.);+#13722 = LINE('',#13723,#13724);+#13723 = CARTESIAN_POINT('',(3.4975,-2.72,1.3));+#13724 = VECTOR('',#13725,1.);+#13725 = DIRECTION('',(1.,0.,0.));+#13726 = PCURVE('',#13702,#13727);+#13727 = DEFINITIONAL_REPRESENTATION('',(#13728),#13732);+#13728 = LINE('',#13729,#13730);+#13729 = CARTESIAN_POINT('',(0.,-0.18));+#13730 = VECTOR('',#13731,1.);+#13731 = DIRECTION('',(1.,0.));+#13732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13733 = PCURVE('',#13672,#13734);+#13734 = DEFINITIONAL_REPRESENTATION('',(#13735),#13739);+#13735 = LINE('',#13736,#13737);+#13736 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#13737 = VECTOR('',#13738,1.);+#13738 = DIRECTION('',(0.,1.));+#13739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13740 = ORIENTED_EDGE('',*,*,#13741,.T.);+#13741 = EDGE_CURVE('',#13719,#13742,#13744,.T.);+#13742 = VERTEX_POINT('',#13743);+#13743 = CARTESIAN_POINT('',(3.763569972422,-2.36,1.3));+#13744 = SURFACE_CURVE('',#13745,(#13749,#13756),.PCURVE_S1.);+#13745 = LINE('',#13746,#13747);+#13746 = CARTESIAN_POINT('',(3.763569972422,-2.72,1.3));+#13747 = VECTOR('',#13748,1.);+#13748 = DIRECTION('',(0.,1.,0.));+#13749 = PCURVE('',#13702,#13750);+#13750 = DEFINITIONAL_REPRESENTATION('',(#13751),#13755);+#13751 = LINE('',#13752,#13753);+#13752 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#13753 = VECTOR('',#13754,1.);+#13754 = DIRECTION('',(0.,1.));+#13755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13756 = PCURVE('',#13757,#13762);+#13757 = CYLINDRICAL_SURFACE('',#13758,0.28);+#13758 = AXIS2_PLACEMENT_3D('',#13759,#13760,#13761);+#13759 = CARTESIAN_POINT('',(3.763569972422,-2.54,1.02));+#13760 = DIRECTION('',(0.,1.,0.));+#13761 = DIRECTION('',(0.,0.,1.));+#13762 = DEFINITIONAL_REPRESENTATION('',(#13763),#13767);+#13763 = LINE('',#13764,#13765);+#13764 = CARTESIAN_POINT('',(0.,-0.18));+#13765 = VECTOR('',#13766,1.);+#13766 = DIRECTION('',(-0.,1.));+#13767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13768 = ORIENTED_EDGE('',*,*,#13769,.F.);+#13769 = EDGE_CURVE('',#13588,#13742,#13770,.T.);+#13770 = SURFACE_CURVE('',#13771,(#13775,#13782),.PCURVE_S1.);+#13771 = LINE('',#13772,#13773);+#13772 = CARTESIAN_POINT('',(3.4975,-2.36,1.3));+#13773 = VECTOR('',#13774,1.);+#13774 = DIRECTION('',(1.,0.,0.));+#13775 = PCURVE('',#13702,#13776);+#13776 = DEFINITIONAL_REPRESENTATION('',(#13777),#13781);+#13777 = LINE('',#13778,#13779);+#13778 = CARTESIAN_POINT('',(0.,0.18));+#13779 = VECTOR('',#13780,1.);+#13780 = DIRECTION('',(1.,0.));+#13781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13782 = PCURVE('',#13611,#13783);+#13783 = DEFINITIONAL_REPRESENTATION('',(#13784),#13788);+#13784 = LINE('',#13785,#13786);+#13785 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#13786 = VECTOR('',#13787,1.);+#13787 = DIRECTION('',(0.,1.));+#13788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13789 = ADVANCED_FACE('',(#13790),#13611,.T.);+#13790 = FACE_BOUND('',#13791,.T.);+#13791 = EDGE_LOOP('',(#13792,#13793,#13794,#13818,#13846,#13875,#13903,+ #13931,#13959,#13988,#14016,#14045,#14073,#14106));+#13792 = ORIENTED_EDGE('',*,*,#13587,.F.);+#13793 = ORIENTED_EDGE('',*,*,#13769,.T.);+#13794 = ORIENTED_EDGE('',*,*,#13795,.T.);+#13795 = EDGE_CURVE('',#13742,#13796,#13798,.T.);+#13796 = VERTEX_POINT('',#13797);+#13797 = CARTESIAN_POINT('',(4.006065227246,-2.36,1.159985897103));+#13798 = SURFACE_CURVE('',#13799,(#13804,#13811),.PCURVE_S1.);+#13799 = CIRCLE('',#13800,0.28);+#13800 = AXIS2_PLACEMENT_3D('',#13801,#13802,#13803);+#13801 = CARTESIAN_POINT('',(3.763569972422,-2.36,1.02));+#13802 = DIRECTION('',(0.,1.,0.));+#13803 = DIRECTION('',(0.,0.,1.));+#13804 = PCURVE('',#13611,#13805);+#13805 = DEFINITIONAL_REPRESENTATION('',(#13806),#13810);+#13806 = CIRCLE('',#13807,0.28);+#13807 = AXIS2_PLACEMENT_2D('',#13808,#13809);+#13808 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#13809 = DIRECTION('',(1.,0.));+#13810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13811 = PCURVE('',#13757,#13812);+#13812 = DEFINITIONAL_REPRESENTATION('',(#13813),#13817);+#13813 = LINE('',#13814,#13815);+#13814 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#13815 = VECTOR('',#13816,1.);+#13816 = DIRECTION('',(1.,-0.));+#13817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13818 = ORIENTED_EDGE('',*,*,#13819,.T.);+#13819 = EDGE_CURVE('',#13796,#13820,#13822,.T.);+#13820 = VERTEX_POINT('',#13821);+#13821 = CARTESIAN_POINT('',(4.537145669057,-2.36,0.240004029399));+#13822 = SURFACE_CURVE('',#13823,(#13827,#13834),.PCURVE_S1.);+#13823 = LINE('',#13824,#13825);+#13824 = CARTESIAN_POINT('',(3.954105448151,-2.36,1.249994963251));+#13825 = VECTOR('',#13826,1.);+#13826 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#13827 = PCURVE('',#13611,#13828);+#13828 = DEFINITIONAL_REPRESENTATION('',(#13829),#13833);+#13829 = LINE('',#13830,#13831);+#13830 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#13831 = VECTOR('',#13832,1.);+#13832 = DIRECTION('',(-0.866054481515,0.499949632511));+#13833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13834 = PCURVE('',#13835,#13840);+#13835 = PLANE('',#13836);+#13836 = AXIS2_PLACEMENT_3D('',#13837,#13838,#13839);+#13837 = CARTESIAN_POINT('',(4.006065227246,-2.54,1.159985897103));+#13838 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#13839 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#13840 = DEFINITIONAL_REPRESENTATION('',(#13841),#13845);+#13841 = LINE('',#13842,#13843);+#13842 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#13843 = VECTOR('',#13844,1.);+#13844 = DIRECTION('',(1.,0.));+#13845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13846 = ORIENTED_EDGE('',*,*,#13847,.F.);+#13847 = EDGE_CURVE('',#13848,#13820,#13850,.T.);+#13848 = VERTEX_POINT('',#13849);+#13849 = CARTESIAN_POINT('',(4.606430027578,-2.36,0.2));+#13850 = SURFACE_CURVE('',#13851,(#13856,#13863),.PCURVE_S1.);+#13851 = CIRCLE('',#13852,8.E-02);+#13852 = AXIS2_PLACEMENT_3D('',#13853,#13854,#13855);+#13853 = CARTESIAN_POINT('',(4.606430027578,-2.36,0.28));+#13854 = DIRECTION('',(0.,1.,0.));+#13855 = DIRECTION('',(0.,0.,1.));+#13856 = PCURVE('',#13611,#13857);+#13857 = DEFINITIONAL_REPRESENTATION('',(#13858),#13862);+#13858 = CIRCLE('',#13859,8.E-02);+#13859 = AXIS2_PLACEMENT_2D('',#13860,#13861);+#13860 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#13861 = DIRECTION('',(1.,0.));+#13862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13863 = PCURVE('',#13864,#13869);+#13864 = CYLINDRICAL_SURFACE('',#13865,8.E-02);+#13865 = AXIS2_PLACEMENT_3D('',#13866,#13867,#13868);+#13866 = CARTESIAN_POINT('',(4.606430027578,-2.54,0.28));+#13867 = DIRECTION('',(0.,1.,0.));+#13868 = DIRECTION('',(0.,0.,1.));+#13869 = DEFINITIONAL_REPRESENTATION('',(#13870),#13874);+#13870 = LINE('',#13871,#13872);+#13871 = CARTESIAN_POINT('',(-0.,0.18));+#13872 = VECTOR('',#13873,1.);+#13873 = DIRECTION('',(1.,-0.));+#13874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13875 = ORIENTED_EDGE('',*,*,#13876,.T.);+#13876 = EDGE_CURVE('',#13848,#13877,#13879,.T.);+#13877 = VERTEX_POINT('',#13878);+#13878 = CARTESIAN_POINT('',(5.255,-2.36,0.2));+#13879 = SURFACE_CURVE('',#13880,(#13884,#13891),.PCURVE_S1.);+#13880 = LINE('',#13881,#13882);+#13881 = CARTESIAN_POINT('',(4.5025,-2.36,0.2));+#13882 = VECTOR('',#13883,1.);+#13883 = DIRECTION('',(1.,0.,0.));+#13884 = PCURVE('',#13611,#13885);+#13885 = DEFINITIONAL_REPRESENTATION('',(#13886),#13890);+#13886 = LINE('',#13887,#13888);+#13887 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#13888 = VECTOR('',#13889,1.);+#13889 = DIRECTION('',(0.,1.));+#13890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13891 = PCURVE('',#13892,#13897);+#13892 = PLANE('',#13893);+#13893 = AXIS2_PLACEMENT_3D('',#13894,#13895,#13896);+#13894 = CARTESIAN_POINT('',(4.606430027578,-2.54,0.2));+#13895 = DIRECTION('',(0.,0.,1.));+#13896 = DIRECTION('',(1.,0.,0.));+#13897 = DEFINITIONAL_REPRESENTATION('',(#13898),#13902);+#13898 = LINE('',#13899,#13900);+#13899 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#13900 = VECTOR('',#13901,1.);+#13901 = DIRECTION('',(1.,0.));+#13902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13903 = ORIENTED_EDGE('',*,*,#13904,.T.);+#13904 = EDGE_CURVE('',#13877,#13905,#13907,.T.);+#13905 = VERTEX_POINT('',#13906);+#13906 = CARTESIAN_POINT('',(5.255,-2.36,0.));+#13907 = SURFACE_CURVE('',#13908,(#13912,#13919),.PCURVE_S1.);+#13908 = LINE('',#13909,#13910);+#13909 = CARTESIAN_POINT('',(5.255,-2.36,1.223081297441E-02));+#13910 = VECTOR('',#13911,1.);+#13911 = DIRECTION('',(0.,0.,-1.));+#13912 = PCURVE('',#13611,#13913);+#13913 = DEFINITIONAL_REPRESENTATION('',(#13914),#13918);+#13914 = LINE('',#13915,#13916);+#13915 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#13916 = VECTOR('',#13917,1.);+#13917 = DIRECTION('',(-1.,0.));+#13918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13919 = PCURVE('',#13920,#13925);+#13920 = PLANE('',#13921);+#13921 = AXIS2_PLACEMENT_3D('',#13922,#13923,#13924);+#13922 = CARTESIAN_POINT('',(5.255,-3.22,-0.5));+#13923 = DIRECTION('',(1.,0.,0.));+#13924 = DIRECTION('',(0.,0.,1.));+#13925 = DEFINITIONAL_REPRESENTATION('',(#13926),#13930);+#13926 = LINE('',#13927,#13928);+#13927 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#13928 = VECTOR('',#13929,1.);+#13929 = DIRECTION('',(-1.,0.));+#13930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13931 = ORIENTED_EDGE('',*,*,#13932,.F.);+#13932 = EDGE_CURVE('',#13933,#13905,#13935,.T.);+#13933 = VERTEX_POINT('',#13934);+#13934 = CARTESIAN_POINT('',(4.606430027578,-2.36,-5.551115123126E-17));+#13935 = SURFACE_CURVE('',#13936,(#13940,#13947),.PCURVE_S1.);+#13936 = LINE('',#13937,#13938);+#13937 = CARTESIAN_POINT('',(4.5025,-2.36,0.));+#13938 = VECTOR('',#13939,1.);+#13939 = DIRECTION('',(1.,0.,0.));+#13940 = PCURVE('',#13611,#13941);+#13941 = DEFINITIONAL_REPRESENTATION('',(#13942),#13946);+#13942 = LINE('',#13943,#13944);+#13943 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#13944 = VECTOR('',#13945,1.);+#13945 = DIRECTION('',(0.,1.));+#13946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13947 = PCURVE('',#13948,#13953);+#13948 = PLANE('',#13949);+#13949 = AXIS2_PLACEMENT_3D('',#13950,#13951,#13952);+#13950 = CARTESIAN_POINT('',(4.606430027578,-2.54,0.));+#13951 = DIRECTION('',(0.,0.,1.));+#13952 = DIRECTION('',(1.,0.,0.));+#13953 = DEFINITIONAL_REPRESENTATION('',(#13954),#13958);+#13954 = LINE('',#13955,#13956);+#13955 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#13956 = VECTOR('',#13957,1.);+#13957 = DIRECTION('',(1.,0.));+#13958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13959 = ORIENTED_EDGE('',*,*,#13960,.T.);+#13960 = EDGE_CURVE('',#13933,#13961,#13963,.T.);+#13961 = VERTEX_POINT('',#13962);+#13962 = CARTESIAN_POINT('',(4.363934772754,-2.36,0.140014102897));+#13963 = SURFACE_CURVE('',#13964,(#13969,#13976),.PCURVE_S1.);+#13964 = CIRCLE('',#13965,0.28);+#13965 = AXIS2_PLACEMENT_3D('',#13966,#13967,#13968);+#13966 = CARTESIAN_POINT('',(4.606430027578,-2.36,0.28));+#13967 = DIRECTION('',(0.,1.,0.));+#13968 = DIRECTION('',(0.,0.,1.));+#13969 = PCURVE('',#13611,#13970);+#13970 = DEFINITIONAL_REPRESENTATION('',(#13971),#13975);+#13971 = CIRCLE('',#13972,0.28);+#13972 = AXIS2_PLACEMENT_2D('',#13973,#13974);+#13973 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#13974 = DIRECTION('',(1.,0.));+#13975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13976 = PCURVE('',#13977,#13982);+#13977 = CYLINDRICAL_SURFACE('',#13978,0.28);+#13978 = AXIS2_PLACEMENT_3D('',#13979,#13980,#13981);+#13979 = CARTESIAN_POINT('',(4.606430027578,-2.54,0.28));+#13980 = DIRECTION('',(0.,1.,0.));+#13981 = DIRECTION('',(0.,0.,1.));+#13982 = DEFINITIONAL_REPRESENTATION('',(#13983),#13987);+#13983 = LINE('',#13984,#13985);+#13984 = CARTESIAN_POINT('',(-0.,0.18));+#13985 = VECTOR('',#13986,1.);+#13986 = DIRECTION('',(1.,-0.));+#13987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13988 = ORIENTED_EDGE('',*,*,#13989,.F.);+#13989 = EDGE_CURVE('',#13990,#13961,#13992,.T.);+#13990 = VERTEX_POINT('',#13991);+#13991 = CARTESIAN_POINT('',(3.832854330943,-2.36,1.059995970601));+#13992 = SURFACE_CURVE('',#13993,(#13997,#14004),.PCURVE_S1.);+#13993 = LINE('',#13994,#13995);+#13994 = CARTESIAN_POINT('',(3.780894551849,-2.36,1.150005036749));+#13995 = VECTOR('',#13996,1.);+#13996 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#13997 = PCURVE('',#13611,#13998);+#13998 = DEFINITIONAL_REPRESENTATION('',(#13999),#14003);+#13999 = LINE('',#14000,#14001);+#14000 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#14001 = VECTOR('',#14002,1.);+#14002 = DIRECTION('',(-0.866054481515,0.499949632511));+#14003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14004 = PCURVE('',#14005,#14010);+#14005 = PLANE('',#14006);+#14006 = AXIS2_PLACEMENT_3D('',#14007,#14008,#14009);+#14007 = CARTESIAN_POINT('',(3.832854330943,-2.54,1.059995970601));+#14008 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#14009 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#14010 = DEFINITIONAL_REPRESENTATION('',(#14011),#14015);+#14011 = LINE('',#14012,#14013);+#14012 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#14013 = VECTOR('',#14014,1.);+#14014 = DIRECTION('',(1.,0.));+#14015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14016 = ORIENTED_EDGE('',*,*,#14017,.F.);+#14017 = EDGE_CURVE('',#14018,#13990,#14020,.T.);+#14018 = VERTEX_POINT('',#14019);+#14019 = CARTESIAN_POINT('',(3.763569972422,-2.36,1.1));+#14020 = SURFACE_CURVE('',#14021,(#14026,#14033),.PCURVE_S1.);+#14021 = CIRCLE('',#14022,8.E-02);+#14022 = AXIS2_PLACEMENT_3D('',#14023,#14024,#14025);+#14023 = CARTESIAN_POINT('',(3.763569972422,-2.36,1.02));+#14024 = DIRECTION('',(0.,1.,0.));+#14025 = DIRECTION('',(0.,0.,1.));+#14026 = PCURVE('',#13611,#14027);+#14027 = DEFINITIONAL_REPRESENTATION('',(#14028),#14032);+#14028 = CIRCLE('',#14029,8.E-02);+#14029 = AXIS2_PLACEMENT_2D('',#14030,#14031);+#14030 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#14031 = DIRECTION('',(1.,0.));+#14032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14033 = PCURVE('',#14034,#14039);+#14034 = CYLINDRICAL_SURFACE('',#14035,8.E-02);+#14035 = AXIS2_PLACEMENT_3D('',#14036,#14037,#14038);+#14036 = CARTESIAN_POINT('',(3.763569972422,-2.54,1.02));+#14037 = DIRECTION('',(0.,1.,0.));+#14038 = DIRECTION('',(0.,0.,1.));+#14039 = DEFINITIONAL_REPRESENTATION('',(#14040),#14044);+#14040 = LINE('',#14041,#14042);+#14041 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#14042 = VECTOR('',#14043,1.);+#14043 = DIRECTION('',(1.,-0.));+#14044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14045 = ORIENTED_EDGE('',*,*,#14046,.F.);+#14046 = EDGE_CURVE('',#14047,#14018,#14049,.T.);+#14047 = VERTEX_POINT('',#14048);+#14048 = CARTESIAN_POINT('',(3.4975,-2.36,1.1));+#14049 = SURFACE_CURVE('',#14050,(#14054,#14061),.PCURVE_S1.);+#14050 = LINE('',#14051,#14052);+#14051 = CARTESIAN_POINT('',(3.4975,-2.36,1.1));+#14052 = VECTOR('',#14053,1.);+#14053 = DIRECTION('',(1.,0.,0.));+#14054 = PCURVE('',#13611,#14055);+#14055 = DEFINITIONAL_REPRESENTATION('',(#14056),#14060);+#14056 = LINE('',#14057,#14058);+#14057 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#14058 = VECTOR('',#14059,1.);+#14059 = DIRECTION('',(0.,1.));+#14060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14061 = PCURVE('',#14062,#14067);+#14062 = PLANE('',#14063);+#14063 = AXIS2_PLACEMENT_3D('',#14064,#14065,#14066);+#14064 = CARTESIAN_POINT('',(3.4975,-2.54,1.1));+#14065 = DIRECTION('',(0.,0.,1.));+#14066 = DIRECTION('',(1.,0.,0.));+#14067 = DEFINITIONAL_REPRESENTATION('',(#14068),#14072);+#14068 = LINE('',#14069,#14070);+#14069 = CARTESIAN_POINT('',(0.,0.18));+#14070 = VECTOR('',#14071,1.);+#14071 = DIRECTION('',(1.,0.));+#14072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14073 = ORIENTED_EDGE('',*,*,#14074,.F.);+#14074 = EDGE_CURVE('',#14075,#14047,#14077,.T.);+#14075 = VERTEX_POINT('',#14076);+#14076 = CARTESIAN_POINT('',(3.4475,-2.36,1.113397459622));+#14077 = SURFACE_CURVE('',#14078,(#14083,#14094),.PCURVE_S1.);+#14078 = CIRCLE('',#14079,0.1);+#14079 = AXIS2_PLACEMENT_3D('',#14080,#14081,#14082);+#14080 = CARTESIAN_POINT('',(3.4975,-2.36,1.2));+#14081 = DIRECTION('',(0.,-1.,0.));+#14082 = DIRECTION('',(1.,0.,0.));+#14083 = PCURVE('',#13611,#14084);+#14084 = DEFINITIONAL_REPRESENTATION('',(#14085),#14093);+#14085 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14086,#14087,#14088,#14089+ ,#14090,#14091,#14092),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14086 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14087 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#14088 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#14089 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#14090 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#14091 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#14092 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14094 = PCURVE('',#14095,#14100);+#14095 = CYLINDRICAL_SURFACE('',#14096,0.1);+#14096 = AXIS2_PLACEMENT_3D('',#14097,#14098,#14099);+#14097 = CARTESIAN_POINT('',(3.4975,-2.54,1.2));+#14098 = DIRECTION('',(0.,1.,0.));+#14099 = DIRECTION('',(1.,0.,0.));+#14100 = DEFINITIONAL_REPRESENTATION('',(#14101),#14105);+#14101 = LINE('',#14102,#14103);+#14102 = CARTESIAN_POINT('',(6.28318530718,0.18));+#14103 = VECTOR('',#14104,1.);+#14104 = DIRECTION('',(-1.,-0.));+#14105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14106 = ORIENTED_EDGE('',*,*,#14107,.F.);+#14107 = EDGE_CURVE('',#13590,#14075,#14108,.T.);+#14108 = SURFACE_CURVE('',#14109,(#14113,#14120),.PCURVE_S1.);+#14109 = LINE('',#14110,#14111);+#14110 = CARTESIAN_POINT('',(3.4475,-2.36,1.223081297441E-02));+#14111 = VECTOR('',#14112,1.);+#14112 = DIRECTION('',(0.,0.,-1.));+#14113 = PCURVE('',#13611,#14114);+#14114 = DEFINITIONAL_REPRESENTATION('',(#14115),#14119);+#14115 = LINE('',#14116,#14117);+#14116 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#14117 = VECTOR('',#14118,1.);+#14118 = DIRECTION('',(-1.,0.));+#14119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14120 = PCURVE('',#13643,#14121);+#14121 = DEFINITIONAL_REPRESENTATION('',(#14122),#14126);+#14122 = LINE('',#14123,#14124);+#14123 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#14124 = VECTOR('',#14125,1.);+#14125 = DIRECTION('',(-1.,0.));+#14126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14127 = ADVANCED_FACE('',(#14128),#13643,.F.);+#14128 = FACE_BOUND('',#14129,.F.);+#14129 = EDGE_LOOP('',(#14130,#14131,#14154,#14175));+#14130 = ORIENTED_EDGE('',*,*,#13627,.F.);+#14131 = ORIENTED_EDGE('',*,*,#14132,.T.);+#14132 = EDGE_CURVE('',#13628,#14133,#14135,.T.);+#14133 = VERTEX_POINT('',#14134);+#14134 = CARTESIAN_POINT('',(3.4475,-2.72,1.113397459622));+#14135 = SURFACE_CURVE('',#14136,(#14140,#14147),.PCURVE_S1.);+#14136 = LINE('',#14137,#14138);+#14137 = CARTESIAN_POINT('',(3.4475,-2.72,1.223081297441E-02));+#14138 = VECTOR('',#14139,1.);+#14139 = DIRECTION('',(0.,0.,-1.));+#14140 = PCURVE('',#13643,#14141);+#14141 = DEFINITIONAL_REPRESENTATION('',(#14142),#14146);+#14142 = LINE('',#14143,#14144);+#14143 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#14144 = VECTOR('',#14145,1.);+#14145 = DIRECTION('',(-1.,0.));+#14146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14147 = PCURVE('',#13672,#14148);+#14148 = DEFINITIONAL_REPRESENTATION('',(#14149),#14153);+#14149 = LINE('',#14150,#14151);+#14150 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#14151 = VECTOR('',#14152,1.);+#14152 = DIRECTION('',(-1.,0.));+#14153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14154 = ORIENTED_EDGE('',*,*,#14155,.T.);+#14155 = EDGE_CURVE('',#14133,#14075,#14156,.T.);+#14156 = SURFACE_CURVE('',#14157,(#14161,#14168),.PCURVE_S1.);+#14157 = LINE('',#14158,#14159);+#14158 = CARTESIAN_POINT('',(3.4475,-2.54,1.113397459622));+#14159 = VECTOR('',#14160,1.);+#14160 = DIRECTION('',(0.,1.,0.));+#14161 = PCURVE('',#13643,#14162);+#14162 = DEFINITIONAL_REPRESENTATION('',(#14163),#14167);+#14163 = LINE('',#14164,#14165);+#14164 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#14165 = VECTOR('',#14166,1.);+#14166 = DIRECTION('',(0.,-1.));+#14167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14168 = PCURVE('',#14095,#14169);+#14169 = DEFINITIONAL_REPRESENTATION('',(#14170),#14174);+#14170 = LINE('',#14171,#14172);+#14171 = CARTESIAN_POINT('',(2.094395102394,0.));+#14172 = VECTOR('',#14173,1.);+#14173 = DIRECTION('',(-0.,1.));+#14174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14175 = ORIENTED_EDGE('',*,*,#14107,.F.);+#14176 = ADVANCED_FACE('',(#14177),#13672,.F.);+#14177 = FACE_BOUND('',#14178,.F.);+#14178 = EDGE_LOOP('',(#14179,#14180,#14181,#14205,#14228,#14252,#14275,+ #14298,#14321,#14345,#14368,#14392,#14415,#14441));+#14179 = ORIENTED_EDGE('',*,*,#13655,.F.);+#14180 = ORIENTED_EDGE('',*,*,#13718,.T.);+#14181 = ORIENTED_EDGE('',*,*,#14182,.T.);+#14182 = EDGE_CURVE('',#13719,#14183,#14185,.T.);+#14183 = VERTEX_POINT('',#14184);+#14184 = CARTESIAN_POINT('',(4.006065227246,-2.72,1.159985897103));+#14185 = SURFACE_CURVE('',#14186,(#14191,#14198),.PCURVE_S1.);+#14186 = CIRCLE('',#14187,0.28);+#14187 = AXIS2_PLACEMENT_3D('',#14188,#14189,#14190);+#14188 = CARTESIAN_POINT('',(3.763569972422,-2.72,1.02));+#14189 = DIRECTION('',(0.,1.,0.));+#14190 = DIRECTION('',(0.,0.,1.));+#14191 = PCURVE('',#13672,#14192);+#14192 = DEFINITIONAL_REPRESENTATION('',(#14193),#14197);+#14193 = CIRCLE('',#14194,0.28);+#14194 = AXIS2_PLACEMENT_2D('',#14195,#14196);+#14195 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#14196 = DIRECTION('',(1.,0.));+#14197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14198 = PCURVE('',#13757,#14199);+#14199 = DEFINITIONAL_REPRESENTATION('',(#14200),#14204);+#14200 = LINE('',#14201,#14202);+#14201 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#14202 = VECTOR('',#14203,1.);+#14203 = DIRECTION('',(1.,0.));+#14204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14205 = ORIENTED_EDGE('',*,*,#14206,.T.);+#14206 = EDGE_CURVE('',#14183,#14207,#14209,.T.);+#14207 = VERTEX_POINT('',#14208);+#14208 = CARTESIAN_POINT('',(4.537145669057,-2.72,0.240004029399));+#14209 = SURFACE_CURVE('',#14210,(#14214,#14221),.PCURVE_S1.);+#14210 = LINE('',#14211,#14212);+#14211 = CARTESIAN_POINT('',(3.954105448151,-2.72,1.249994963251));+#14212 = VECTOR('',#14213,1.);+#14213 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#14214 = PCURVE('',#13672,#14215);+#14215 = DEFINITIONAL_REPRESENTATION('',(#14216),#14220);+#14216 = LINE('',#14217,#14218);+#14217 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#14218 = VECTOR('',#14219,1.);+#14219 = DIRECTION('',(-0.866054481515,0.499949632511));+#14220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14221 = PCURVE('',#13835,#14222);+#14222 = DEFINITIONAL_REPRESENTATION('',(#14223),#14227);+#14223 = LINE('',#14224,#14225);+#14224 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#14225 = VECTOR('',#14226,1.);+#14226 = DIRECTION('',(1.,0.));+#14227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14228 = ORIENTED_EDGE('',*,*,#14229,.F.);+#14229 = EDGE_CURVE('',#14230,#14207,#14232,.T.);+#14230 = VERTEX_POINT('',#14231);+#14231 = CARTESIAN_POINT('',(4.606430027578,-2.72,0.2));+#14232 = SURFACE_CURVE('',#14233,(#14238,#14245),.PCURVE_S1.);+#14233 = CIRCLE('',#14234,8.E-02);+#14234 = AXIS2_PLACEMENT_3D('',#14235,#14236,#14237);+#14235 = CARTESIAN_POINT('',(4.606430027578,-2.72,0.28));+#14236 = DIRECTION('',(0.,1.,0.));+#14237 = DIRECTION('',(0.,0.,1.));+#14238 = PCURVE('',#13672,#14239);+#14239 = DEFINITIONAL_REPRESENTATION('',(#14240),#14244);+#14240 = CIRCLE('',#14241,8.E-02);+#14241 = AXIS2_PLACEMENT_2D('',#14242,#14243);+#14242 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#14243 = DIRECTION('',(1.,0.));+#14244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14245 = PCURVE('',#13864,#14246);+#14246 = DEFINITIONAL_REPRESENTATION('',(#14247),#14251);+#14247 = LINE('',#14248,#14249);+#14248 = CARTESIAN_POINT('',(0.,-0.18));+#14249 = VECTOR('',#14250,1.);+#14250 = DIRECTION('',(1.,0.));+#14251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14252 = ORIENTED_EDGE('',*,*,#14253,.T.);+#14253 = EDGE_CURVE('',#14230,#14254,#14256,.T.);+#14254 = VERTEX_POINT('',#14255);+#14255 = CARTESIAN_POINT('',(5.255,-2.72,0.2));+#14256 = SURFACE_CURVE('',#14257,(#14261,#14268),.PCURVE_S1.);+#14257 = LINE('',#14258,#14259);+#14258 = CARTESIAN_POINT('',(4.5025,-2.72,0.2));+#14259 = VECTOR('',#14260,1.);+#14260 = DIRECTION('',(1.,0.,0.));+#14261 = PCURVE('',#13672,#14262);+#14262 = DEFINITIONAL_REPRESENTATION('',(#14263),#14267);+#14263 = LINE('',#14264,#14265);+#14264 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#14265 = VECTOR('',#14266,1.);+#14266 = DIRECTION('',(0.,1.));+#14267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14268 = PCURVE('',#13892,#14269);+#14269 = DEFINITIONAL_REPRESENTATION('',(#14270),#14274);+#14270 = LINE('',#14271,#14272);+#14271 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#14272 = VECTOR('',#14273,1.);+#14273 = DIRECTION('',(1.,0.));+#14274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14275 = ORIENTED_EDGE('',*,*,#14276,.T.);+#14276 = EDGE_CURVE('',#14254,#14277,#14279,.T.);+#14277 = VERTEX_POINT('',#14278);+#14278 = CARTESIAN_POINT('',(5.255,-2.72,0.));+#14279 = SURFACE_CURVE('',#14280,(#14284,#14291),.PCURVE_S1.);+#14280 = LINE('',#14281,#14282);+#14281 = CARTESIAN_POINT('',(5.255,-2.72,1.223081297441E-02));+#14282 = VECTOR('',#14283,1.);+#14283 = DIRECTION('',(0.,0.,-1.));+#14284 = PCURVE('',#13672,#14285);+#14285 = DEFINITIONAL_REPRESENTATION('',(#14286),#14290);+#14286 = LINE('',#14287,#14288);+#14287 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#14288 = VECTOR('',#14289,1.);+#14289 = DIRECTION('',(-1.,0.));+#14290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14291 = PCURVE('',#13920,#14292);+#14292 = DEFINITIONAL_REPRESENTATION('',(#14293),#14297);+#14293 = LINE('',#14294,#14295);+#14294 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#14295 = VECTOR('',#14296,1.);+#14296 = DIRECTION('',(-1.,0.));+#14297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14298 = ORIENTED_EDGE('',*,*,#14299,.F.);+#14299 = EDGE_CURVE('',#14300,#14277,#14302,.T.);+#14300 = VERTEX_POINT('',#14301);+#14301 = CARTESIAN_POINT('',(4.606430027578,-2.72,-5.551115123126E-17));+#14302 = SURFACE_CURVE('',#14303,(#14307,#14314),.PCURVE_S1.);+#14303 = LINE('',#14304,#14305);+#14304 = CARTESIAN_POINT('',(4.5025,-2.72,0.));+#14305 = VECTOR('',#14306,1.);+#14306 = DIRECTION('',(1.,0.,0.));+#14307 = PCURVE('',#13672,#14308);+#14308 = DEFINITIONAL_REPRESENTATION('',(#14309),#14313);+#14309 = LINE('',#14310,#14311);+#14310 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#14311 = VECTOR('',#14312,1.);+#14312 = DIRECTION('',(0.,1.));+#14313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14314 = PCURVE('',#13948,#14315);+#14315 = DEFINITIONAL_REPRESENTATION('',(#14316),#14320);+#14316 = LINE('',#14317,#14318);+#14317 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#14318 = VECTOR('',#14319,1.);+#14319 = DIRECTION('',(1.,0.));+#14320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14321 = ORIENTED_EDGE('',*,*,#14322,.T.);+#14322 = EDGE_CURVE('',#14300,#14323,#14325,.T.);+#14323 = VERTEX_POINT('',#14324);+#14324 = CARTESIAN_POINT('',(4.363934772754,-2.72,0.140014102897));+#14325 = SURFACE_CURVE('',#14326,(#14331,#14338),.PCURVE_S1.);+#14326 = CIRCLE('',#14327,0.28);+#14327 = AXIS2_PLACEMENT_3D('',#14328,#14329,#14330);+#14328 = CARTESIAN_POINT('',(4.606430027578,-2.72,0.28));+#14329 = DIRECTION('',(0.,1.,0.));+#14330 = DIRECTION('',(0.,0.,1.));+#14331 = PCURVE('',#13672,#14332);+#14332 = DEFINITIONAL_REPRESENTATION('',(#14333),#14337);+#14333 = CIRCLE('',#14334,0.28);+#14334 = AXIS2_PLACEMENT_2D('',#14335,#14336);+#14335 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#14336 = DIRECTION('',(1.,0.));+#14337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14338 = PCURVE('',#13977,#14339);+#14339 = DEFINITIONAL_REPRESENTATION('',(#14340),#14344);+#14340 = LINE('',#14341,#14342);+#14341 = CARTESIAN_POINT('',(0.,-0.18));+#14342 = VECTOR('',#14343,1.);+#14343 = DIRECTION('',(1.,0.));+#14344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14345 = ORIENTED_EDGE('',*,*,#14346,.F.);+#14346 = EDGE_CURVE('',#14347,#14323,#14349,.T.);+#14347 = VERTEX_POINT('',#14348);+#14348 = CARTESIAN_POINT('',(3.832854330943,-2.72,1.059995970601));+#14349 = SURFACE_CURVE('',#14350,(#14354,#14361),.PCURVE_S1.);+#14350 = LINE('',#14351,#14352);+#14351 = CARTESIAN_POINT('',(3.780894551849,-2.72,1.150005036749));+#14352 = VECTOR('',#14353,1.);+#14353 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#14354 = PCURVE('',#13672,#14355);+#14355 = DEFINITIONAL_REPRESENTATION('',(#14356),#14360);+#14356 = LINE('',#14357,#14358);+#14357 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#14358 = VECTOR('',#14359,1.);+#14359 = DIRECTION('',(-0.866054481515,0.499949632511));+#14360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14361 = PCURVE('',#14005,#14362);+#14362 = DEFINITIONAL_REPRESENTATION('',(#14363),#14367);+#14363 = LINE('',#14364,#14365);+#14364 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#14365 = VECTOR('',#14366,1.);+#14366 = DIRECTION('',(1.,0.));+#14367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14368 = ORIENTED_EDGE('',*,*,#14369,.F.);+#14369 = EDGE_CURVE('',#14370,#14347,#14372,.T.);+#14370 = VERTEX_POINT('',#14371);+#14371 = CARTESIAN_POINT('',(3.763569972422,-2.72,1.1));+#14372 = SURFACE_CURVE('',#14373,(#14378,#14385),.PCURVE_S1.);+#14373 = CIRCLE('',#14374,8.E-02);+#14374 = AXIS2_PLACEMENT_3D('',#14375,#14376,#14377);+#14375 = CARTESIAN_POINT('',(3.763569972422,-2.72,1.02));+#14376 = DIRECTION('',(0.,1.,0.));+#14377 = DIRECTION('',(0.,0.,1.));+#14378 = PCURVE('',#13672,#14379);+#14379 = DEFINITIONAL_REPRESENTATION('',(#14380),#14384);+#14380 = CIRCLE('',#14381,8.E-02);+#14381 = AXIS2_PLACEMENT_2D('',#14382,#14383);+#14382 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#14383 = DIRECTION('',(1.,0.));+#14384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14385 = PCURVE('',#14034,#14386);+#14386 = DEFINITIONAL_REPRESENTATION('',(#14387),#14391);+#14387 = LINE('',#14388,#14389);+#14388 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#14389 = VECTOR('',#14390,1.);+#14390 = DIRECTION('',(1.,0.));+#14391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14392 = ORIENTED_EDGE('',*,*,#14393,.F.);+#14393 = EDGE_CURVE('',#14394,#14370,#14396,.T.);+#14394 = VERTEX_POINT('',#14395);+#14395 = CARTESIAN_POINT('',(3.4975,-2.72,1.1));+#14396 = SURFACE_CURVE('',#14397,(#14401,#14408),.PCURVE_S1.);+#14397 = LINE('',#14398,#14399);+#14398 = CARTESIAN_POINT('',(3.4975,-2.72,1.1));+#14399 = VECTOR('',#14400,1.);+#14400 = DIRECTION('',(1.,0.,0.));+#14401 = PCURVE('',#13672,#14402);+#14402 = DEFINITIONAL_REPRESENTATION('',(#14403),#14407);+#14403 = LINE('',#14404,#14405);+#14404 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#14405 = VECTOR('',#14406,1.);+#14406 = DIRECTION('',(0.,1.));+#14407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14408 = PCURVE('',#14062,#14409);+#14409 = DEFINITIONAL_REPRESENTATION('',(#14410),#14414);+#14410 = LINE('',#14411,#14412);+#14411 = CARTESIAN_POINT('',(0.,-0.18));+#14412 = VECTOR('',#14413,1.);+#14413 = DIRECTION('',(1.,0.));+#14414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14415 = ORIENTED_EDGE('',*,*,#14416,.F.);+#14416 = EDGE_CURVE('',#14133,#14394,#14417,.T.);+#14417 = SURFACE_CURVE('',#14418,(#14423,#14434),.PCURVE_S1.);+#14418 = CIRCLE('',#14419,0.1);+#14419 = AXIS2_PLACEMENT_3D('',#14420,#14421,#14422);+#14420 = CARTESIAN_POINT('',(3.4975,-2.72,1.2));+#14421 = DIRECTION('',(0.,-1.,0.));+#14422 = DIRECTION('',(1.,0.,0.));+#14423 = PCURVE('',#13672,#14424);+#14424 = DEFINITIONAL_REPRESENTATION('',(#14425),#14433);+#14425 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14426,#14427,#14428,#14429+ ,#14430,#14431,#14432),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14426 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14427 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#14428 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#14429 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#14430 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#14431 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#14432 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14434 = PCURVE('',#14095,#14435);+#14435 = DEFINITIONAL_REPRESENTATION('',(#14436),#14440);+#14436 = LINE('',#14437,#14438);+#14437 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#14438 = VECTOR('',#14439,1.);+#14439 = DIRECTION('',(-1.,0.));+#14440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14441 = ORIENTED_EDGE('',*,*,#14132,.F.);+#14442 = ADVANCED_FACE('',(#14443),#13757,.T.);+#14443 = FACE_BOUND('',#14444,.T.);+#14444 = EDGE_LOOP('',(#14445,#14446,#14447,#14468));+#14445 = ORIENTED_EDGE('',*,*,#13741,.F.);+#14446 = ORIENTED_EDGE('',*,*,#14182,.T.);+#14447 = ORIENTED_EDGE('',*,*,#14448,.T.);+#14448 = EDGE_CURVE('',#14183,#13796,#14449,.T.);+#14449 = SURFACE_CURVE('',#14450,(#14454,#14461),.PCURVE_S1.);+#14450 = LINE('',#14451,#14452);+#14451 = CARTESIAN_POINT('',(4.006065227246,-2.72,1.159985897103));+#14452 = VECTOR('',#14453,1.);+#14453 = DIRECTION('',(0.,1.,0.));+#14454 = PCURVE('',#13757,#14455);+#14455 = DEFINITIONAL_REPRESENTATION('',(#14456),#14460);+#14456 = LINE('',#14457,#14458);+#14457 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#14458 = VECTOR('',#14459,1.);+#14459 = DIRECTION('',(-0.,1.));+#14460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14461 = PCURVE('',#13835,#14462);+#14462 = DEFINITIONAL_REPRESENTATION('',(#14463),#14467);+#14463 = LINE('',#14464,#14465);+#14464 = CARTESIAN_POINT('',(0.,-0.18));+#14465 = VECTOR('',#14466,1.);+#14466 = DIRECTION('',(0.,1.));+#14467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14468 = ORIENTED_EDGE('',*,*,#13795,.F.);+#14469 = ADVANCED_FACE('',(#14470),#14095,.T.);+#14470 = FACE_BOUND('',#14471,.T.);+#14471 = EDGE_LOOP('',(#14472,#14473,#14494,#14495));+#14472 = ORIENTED_EDGE('',*,*,#14074,.T.);+#14473 = ORIENTED_EDGE('',*,*,#14474,.T.);+#14474 = EDGE_CURVE('',#14047,#14394,#14475,.T.);+#14475 = SURFACE_CURVE('',#14476,(#14480,#14487),.PCURVE_S1.);+#14476 = LINE('',#14477,#14478);+#14477 = CARTESIAN_POINT('',(3.4975,-2.36,1.1));+#14478 = VECTOR('',#14479,1.);+#14479 = DIRECTION('',(0.,-1.,0.));+#14480 = PCURVE('',#14095,#14481);+#14481 = DEFINITIONAL_REPRESENTATION('',(#14482),#14486);+#14482 = LINE('',#14483,#14484);+#14483 = CARTESIAN_POINT('',(1.570796326795,0.18));+#14484 = VECTOR('',#14485,1.);+#14485 = DIRECTION('',(-0.,-1.));+#14486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14487 = PCURVE('',#14062,#14488);+#14488 = DEFINITIONAL_REPRESENTATION('',(#14489),#14493);+#14489 = LINE('',#14490,#14491);+#14490 = CARTESIAN_POINT('',(0.,0.18));+#14491 = VECTOR('',#14492,1.);+#14492 = DIRECTION('',(0.,-1.));+#14493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14494 = ORIENTED_EDGE('',*,*,#14416,.F.);+#14495 = ORIENTED_EDGE('',*,*,#14155,.T.);+#14496 = ADVANCED_FACE('',(#14497),#14062,.F.);+#14497 = FACE_BOUND('',#14498,.F.);+#14498 = EDGE_LOOP('',(#14499,#14500,#14521,#14522));+#14499 = ORIENTED_EDGE('',*,*,#14393,.T.);+#14500 = ORIENTED_EDGE('',*,*,#14501,.F.);+#14501 = EDGE_CURVE('',#14018,#14370,#14502,.T.);+#14502 = SURFACE_CURVE('',#14503,(#14507,#14514),.PCURVE_S1.);+#14503 = LINE('',#14504,#14505);+#14504 = CARTESIAN_POINT('',(3.763569972422,-2.36,1.1));+#14505 = VECTOR('',#14506,1.);+#14506 = DIRECTION('',(0.,-1.,0.));+#14507 = PCURVE('',#14062,#14508);+#14508 = DEFINITIONAL_REPRESENTATION('',(#14509),#14513);+#14509 = LINE('',#14510,#14511);+#14510 = CARTESIAN_POINT('',(0.266069972422,0.18));+#14511 = VECTOR('',#14512,1.);+#14512 = DIRECTION('',(0.,-1.));+#14513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14514 = PCURVE('',#14034,#14515);+#14515 = DEFINITIONAL_REPRESENTATION('',(#14516),#14520);+#14516 = LINE('',#14517,#14518);+#14517 = CARTESIAN_POINT('',(0.,0.18));+#14518 = VECTOR('',#14519,1.);+#14519 = DIRECTION('',(0.,-1.));+#14520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14521 = ORIENTED_EDGE('',*,*,#14046,.F.);+#14522 = ORIENTED_EDGE('',*,*,#14474,.T.);+#14523 = ADVANCED_FACE('',(#14524),#14034,.F.);+#14524 = FACE_BOUND('',#14525,.F.);+#14525 = EDGE_LOOP('',(#14526,#14527,#14548,#14549));+#14526 = ORIENTED_EDGE('',*,*,#14369,.T.);+#14527 = ORIENTED_EDGE('',*,*,#14528,.F.);+#14528 = EDGE_CURVE('',#13990,#14347,#14529,.T.);+#14529 = SURFACE_CURVE('',#14530,(#14534,#14541),.PCURVE_S1.);+#14530 = LINE('',#14531,#14532);+#14531 = CARTESIAN_POINT('',(3.832854330943,-2.36,1.059995970601));+#14532 = VECTOR('',#14533,1.);+#14533 = DIRECTION('',(0.,-1.,0.));+#14534 = PCURVE('',#14034,#14535);+#14535 = DEFINITIONAL_REPRESENTATION('',(#14536),#14540);+#14536 = LINE('',#14537,#14538);+#14537 = CARTESIAN_POINT('',(1.047255709587,0.18));+#14538 = VECTOR('',#14539,1.);+#14539 = DIRECTION('',(0.,-1.));+#14540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14541 = PCURVE('',#14005,#14542);+#14542 = DEFINITIONAL_REPRESENTATION('',(#14543),#14547);+#14543 = LINE('',#14544,#14545);+#14544 = CARTESIAN_POINT('',(0.,0.18));+#14545 = VECTOR('',#14546,1.);+#14546 = DIRECTION('',(0.,-1.));+#14547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14548 = ORIENTED_EDGE('',*,*,#14017,.F.);+#14549 = ORIENTED_EDGE('',*,*,#14501,.T.);+#14550 = ADVANCED_FACE('',(#14551),#14005,.F.);+#14551 = FACE_BOUND('',#14552,.F.);+#14552 = EDGE_LOOP('',(#14553,#14554,#14575,#14576));+#14553 = ORIENTED_EDGE('',*,*,#14346,.T.);+#14554 = ORIENTED_EDGE('',*,*,#14555,.F.);+#14555 = EDGE_CURVE('',#13961,#14323,#14556,.T.);+#14556 = SURFACE_CURVE('',#14557,(#14561,#14568),.PCURVE_S1.);+#14557 = LINE('',#14558,#14559);+#14558 = CARTESIAN_POINT('',(4.363934772754,-2.36,0.140014102897));+#14559 = VECTOR('',#14560,1.);+#14560 = DIRECTION('',(0.,-1.,0.));+#14561 = PCURVE('',#14005,#14562);+#14562 = DEFINITIONAL_REPRESENTATION('',(#14563),#14567);+#14563 = LINE('',#14564,#14565);+#14564 = CARTESIAN_POINT('',(1.062267891155,0.18));+#14565 = VECTOR('',#14566,1.);+#14566 = DIRECTION('',(0.,-1.));+#14567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14568 = PCURVE('',#13977,#14569);+#14569 = DEFINITIONAL_REPRESENTATION('',(#14570),#14574);+#14570 = LINE('',#14571,#14572);+#14571 = CARTESIAN_POINT('',(4.188848363177,0.18));+#14572 = VECTOR('',#14573,1.);+#14573 = DIRECTION('',(0.,-1.));+#14574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14575 = ORIENTED_EDGE('',*,*,#13989,.F.);+#14576 = ORIENTED_EDGE('',*,*,#14528,.T.);+#14577 = ADVANCED_FACE('',(#14578),#13977,.T.);+#14578 = FACE_BOUND('',#14579,.T.);+#14579 = EDGE_LOOP('',(#14580,#14581,#14582,#14583));+#14580 = ORIENTED_EDGE('',*,*,#14322,.T.);+#14581 = ORIENTED_EDGE('',*,*,#14555,.F.);+#14582 = ORIENTED_EDGE('',*,*,#13960,.F.);+#14583 = ORIENTED_EDGE('',*,*,#14584,.T.);+#14584 = EDGE_CURVE('',#13933,#14300,#14585,.T.);+#14585 = SURFACE_CURVE('',#14586,(#14590,#14597),.PCURVE_S1.);+#14586 = LINE('',#14587,#14588);+#14587 = CARTESIAN_POINT('',(4.606430027578,-2.36,-5.551115123126E-17));+#14588 = VECTOR('',#14589,1.);+#14589 = DIRECTION('',(0.,-1.,0.));+#14590 = PCURVE('',#13977,#14591);+#14591 = DEFINITIONAL_REPRESENTATION('',(#14592),#14596);+#14592 = LINE('',#14593,#14594);+#14593 = CARTESIAN_POINT('',(3.14159265359,0.18));+#14594 = VECTOR('',#14595,1.);+#14595 = DIRECTION('',(0.,-1.));+#14596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14597 = PCURVE('',#13948,#14598);+#14598 = DEFINITIONAL_REPRESENTATION('',(#14599),#14603);+#14599 = LINE('',#14600,#14601);+#14600 = CARTESIAN_POINT('',(0.,0.18));+#14601 = VECTOR('',#14602,1.);+#14602 = DIRECTION('',(0.,-1.));+#14603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14604 = ADVANCED_FACE('',(#14605),#13948,.F.);+#14605 = FACE_BOUND('',#14606,.F.);+#14606 = EDGE_LOOP('',(#14607,#14608,#14609,#14630));+#14607 = ORIENTED_EDGE('',*,*,#14584,.T.);+#14608 = ORIENTED_EDGE('',*,*,#14299,.T.);+#14609 = ORIENTED_EDGE('',*,*,#14610,.T.);+#14610 = EDGE_CURVE('',#14277,#13905,#14611,.T.);+#14611 = SURFACE_CURVE('',#14612,(#14616,#14623),.PCURVE_S1.);+#14612 = LINE('',#14613,#14614);+#14613 = CARTESIAN_POINT('',(5.255,-2.88,0.));+#14614 = VECTOR('',#14615,1.);+#14615 = DIRECTION('',(0.,1.,0.));+#14616 = PCURVE('',#13948,#14617);+#14617 = DEFINITIONAL_REPRESENTATION('',(#14618),#14622);+#14618 = LINE('',#14619,#14620);+#14619 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#14620 = VECTOR('',#14621,1.);+#14621 = DIRECTION('',(0.,1.));+#14622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14623 = PCURVE('',#13920,#14624);+#14624 = DEFINITIONAL_REPRESENTATION('',(#14625),#14629);+#14625 = LINE('',#14626,#14627);+#14626 = CARTESIAN_POINT('',(0.5,-0.34));+#14627 = VECTOR('',#14628,1.);+#14628 = DIRECTION('',(0.,-1.));+#14629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14630 = ORIENTED_EDGE('',*,*,#13932,.F.);+#14631 = ADVANCED_FACE('',(#14632),#13920,.T.);+#14632 = FACE_BOUND('',#14633,.T.);+#14633 = EDGE_LOOP('',(#14634,#14655,#14656,#14657));+#14634 = ORIENTED_EDGE('',*,*,#14635,.F.);+#14635 = EDGE_CURVE('',#14254,#13877,#14636,.T.);+#14636 = SURFACE_CURVE('',#14637,(#14641,#14648),.PCURVE_S1.);+#14637 = LINE('',#14638,#14639);+#14638 = CARTESIAN_POINT('',(5.255,-2.88,0.2));+#14639 = VECTOR('',#14640,1.);+#14640 = DIRECTION('',(0.,1.,0.));+#14641 = PCURVE('',#13920,#14642);+#14642 = DEFINITIONAL_REPRESENTATION('',(#14643),#14647);+#14643 = LINE('',#14644,#14645);+#14644 = CARTESIAN_POINT('',(0.7,-0.34));+#14645 = VECTOR('',#14646,1.);+#14646 = DIRECTION('',(0.,-1.));+#14647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14648 = PCURVE('',#13892,#14649);+#14649 = DEFINITIONAL_REPRESENTATION('',(#14650),#14654);+#14650 = LINE('',#14651,#14652);+#14651 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#14652 = VECTOR('',#14653,1.);+#14653 = DIRECTION('',(0.,1.));+#14654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14655 = ORIENTED_EDGE('',*,*,#14276,.T.);+#14656 = ORIENTED_EDGE('',*,*,#14610,.T.);+#14657 = ORIENTED_EDGE('',*,*,#13904,.F.);+#14658 = ADVANCED_FACE('',(#14659),#13892,.T.);+#14659 = FACE_BOUND('',#14660,.T.);+#14660 = EDGE_LOOP('',(#14661,#14682,#14683,#14684));+#14661 = ORIENTED_EDGE('',*,*,#14662,.T.);+#14662 = EDGE_CURVE('',#13848,#14230,#14663,.T.);+#14663 = SURFACE_CURVE('',#14664,(#14668,#14675),.PCURVE_S1.);+#14664 = LINE('',#14665,#14666);+#14665 = CARTESIAN_POINT('',(4.606430027578,-2.36,0.2));+#14666 = VECTOR('',#14667,1.);+#14667 = DIRECTION('',(0.,-1.,0.));+#14668 = PCURVE('',#13892,#14669);+#14669 = DEFINITIONAL_REPRESENTATION('',(#14670),#14674);+#14670 = LINE('',#14671,#14672);+#14671 = CARTESIAN_POINT('',(0.,0.18));+#14672 = VECTOR('',#14673,1.);+#14673 = DIRECTION('',(0.,-1.));+#14674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14675 = PCURVE('',#13864,#14676);+#14676 = DEFINITIONAL_REPRESENTATION('',(#14677),#14681);+#14677 = LINE('',#14678,#14679);+#14678 = CARTESIAN_POINT('',(3.14159265359,0.18));+#14679 = VECTOR('',#14680,1.);+#14680 = DIRECTION('',(0.,-1.));+#14681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14682 = ORIENTED_EDGE('',*,*,#14253,.T.);+#14683 = ORIENTED_EDGE('',*,*,#14635,.T.);+#14684 = ORIENTED_EDGE('',*,*,#13876,.F.);+#14685 = ADVANCED_FACE('',(#14686),#13864,.F.);+#14686 = FACE_BOUND('',#14687,.F.);+#14687 = EDGE_LOOP('',(#14688,#14689,#14710,#14711));+#14688 = ORIENTED_EDGE('',*,*,#14229,.T.);+#14689 = ORIENTED_EDGE('',*,*,#14690,.F.);+#14690 = EDGE_CURVE('',#13820,#14207,#14691,.T.);+#14691 = SURFACE_CURVE('',#14692,(#14696,#14703),.PCURVE_S1.);+#14692 = LINE('',#14693,#14694);+#14693 = CARTESIAN_POINT('',(4.537145669057,-2.36,0.240004029399));+#14694 = VECTOR('',#14695,1.);+#14695 = DIRECTION('',(0.,-1.,0.));+#14696 = PCURVE('',#13864,#14697);+#14697 = DEFINITIONAL_REPRESENTATION('',(#14698),#14702);+#14698 = LINE('',#14699,#14700);+#14699 = CARTESIAN_POINT('',(4.188848363177,0.18));+#14700 = VECTOR('',#14701,1.);+#14701 = DIRECTION('',(0.,-1.));+#14702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14703 = PCURVE('',#13835,#14704);+#14704 = DEFINITIONAL_REPRESENTATION('',(#14705),#14709);+#14705 = LINE('',#14706,#14707);+#14706 = CARTESIAN_POINT('',(1.062267891155,0.18));+#14707 = VECTOR('',#14708,1.);+#14708 = DIRECTION('',(0.,-1.));+#14709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14710 = ORIENTED_EDGE('',*,*,#13847,.F.);+#14711 = ORIENTED_EDGE('',*,*,#14662,.T.);+#14712 = ADVANCED_FACE('',(#14713),#13835,.T.);+#14713 = FACE_BOUND('',#14714,.T.);+#14714 = EDGE_LOOP('',(#14715,#14716,#14717,#14718));+#14715 = ORIENTED_EDGE('',*,*,#14448,.F.);+#14716 = ORIENTED_EDGE('',*,*,#14206,.T.);+#14717 = ORIENTED_EDGE('',*,*,#14690,.F.);+#14718 = ORIENTED_EDGE('',*,*,#13819,.F.);+#14719 = MANIFOLD_SOLID_BREP('',#14720);+#14720 = CLOSED_SHELL('',(#14721,#14851,#14927,#15265,#15314,#15580,+ #15607,#15634,#15661,#15688,#15715,#15742,#15769,#15796,#15823,+ #15850));+#14721 = ADVANCED_FACE('',(#14722),#14737,.T.);+#14722 = FACE_BOUND('',#14723,.T.);+#14723 = EDGE_LOOP('',(#14724,#14764,#14792,#14825));+#14724 = ORIENTED_EDGE('',*,*,#14725,.T.);+#14725 = EDGE_CURVE('',#14726,#14728,#14730,.T.);+#14726 = VERTEX_POINT('',#14727);+#14727 = CARTESIAN_POINT('',(3.4975,-1.09,1.3));+#14728 = VERTEX_POINT('',#14729);+#14729 = CARTESIAN_POINT('',(3.4475,-1.09,1.286602540378));+#14730 = SURFACE_CURVE('',#14731,(#14736,#14748),.PCURVE_S1.);+#14731 = CIRCLE('',#14732,0.1);+#14732 = AXIS2_PLACEMENT_3D('',#14733,#14734,#14735);+#14733 = CARTESIAN_POINT('',(3.4975,-1.09,1.2));+#14734 = DIRECTION('',(0.,-1.,0.));+#14735 = DIRECTION('',(1.,0.,0.));+#14736 = PCURVE('',#14737,#14742);+#14737 = CYLINDRICAL_SURFACE('',#14738,0.1);+#14738 = AXIS2_PLACEMENT_3D('',#14739,#14740,#14741);+#14739 = CARTESIAN_POINT('',(3.4975,-1.27,1.2));+#14740 = DIRECTION('',(0.,1.,0.));+#14741 = DIRECTION('',(1.,0.,0.));+#14742 = DEFINITIONAL_REPRESENTATION('',(#14743),#14747);+#14743 = LINE('',#14744,#14745);+#14744 = CARTESIAN_POINT('',(6.28318530718,0.18));+#14745 = VECTOR('',#14746,1.);+#14746 = DIRECTION('',(-1.,-0.));+#14747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14748 = PCURVE('',#14749,#14754);+#14749 = PLANE('',#14750);+#14750 = AXIS2_PLACEMENT_3D('',#14751,#14752,#14753);+#14751 = CARTESIAN_POINT('',(4.408401242914,-1.09,0.524461625949));+#14752 = DIRECTION('',(0.,1.,0.));+#14753 = DIRECTION('',(0.,0.,1.));+#14754 = DEFINITIONAL_REPRESENTATION('',(#14755),#14763);+#14755 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14756,#14757,#14758,#14759+ ,#14760,#14761,#14762),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14756 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14757 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#14758 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#14759 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#14760 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#14761 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#14762 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14764 = ORIENTED_EDGE('',*,*,#14765,.F.);+#14765 = EDGE_CURVE('',#14766,#14728,#14768,.T.);+#14766 = VERTEX_POINT('',#14767);+#14767 = CARTESIAN_POINT('',(3.4475,-1.45,1.286602540378));+#14768 = SURFACE_CURVE('',#14769,(#14773,#14780),.PCURVE_S1.);+#14769 = LINE('',#14770,#14771);+#14770 = CARTESIAN_POINT('',(3.4475,-1.27,1.286602540378));+#14771 = VECTOR('',#14772,1.);+#14772 = DIRECTION('',(0.,1.,0.));+#14773 = PCURVE('',#14737,#14774);+#14774 = DEFINITIONAL_REPRESENTATION('',(#14775),#14779);+#14775 = LINE('',#14776,#14777);+#14776 = CARTESIAN_POINT('',(4.188790204787,0.));+#14777 = VECTOR('',#14778,1.);+#14778 = DIRECTION('',(-0.,1.));+#14779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14780 = PCURVE('',#14781,#14786);+#14781 = PLANE('',#14782);+#14782 = AXIS2_PLACEMENT_3D('',#14783,#14784,#14785);+#14783 = CARTESIAN_POINT('',(3.4475,-1.95,-0.5));+#14784 = DIRECTION('',(1.,0.,0.));+#14785 = DIRECTION('',(0.,0.,1.));+#14786 = DEFINITIONAL_REPRESENTATION('',(#14787),#14791);+#14787 = LINE('',#14788,#14789);+#14788 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#14789 = VECTOR('',#14790,1.);+#14790 = DIRECTION('',(0.,-1.));+#14791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14792 = ORIENTED_EDGE('',*,*,#14793,.F.);+#14793 = EDGE_CURVE('',#14794,#14766,#14796,.T.);+#14794 = VERTEX_POINT('',#14795);+#14795 = CARTESIAN_POINT('',(3.4975,-1.45,1.3));+#14796 = SURFACE_CURVE('',#14797,(#14802,#14809),.PCURVE_S1.);+#14797 = CIRCLE('',#14798,0.1);+#14798 = AXIS2_PLACEMENT_3D('',#14799,#14800,#14801);+#14799 = CARTESIAN_POINT('',(3.4975,-1.45,1.2));+#14800 = DIRECTION('',(0.,-1.,0.));+#14801 = DIRECTION('',(1.,0.,0.));+#14802 = PCURVE('',#14737,#14803);+#14803 = DEFINITIONAL_REPRESENTATION('',(#14804),#14808);+#14804 = LINE('',#14805,#14806);+#14805 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#14806 = VECTOR('',#14807,1.);+#14807 = DIRECTION('',(-1.,0.));+#14808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14809 = PCURVE('',#14810,#14815);+#14810 = PLANE('',#14811);+#14811 = AXIS2_PLACEMENT_3D('',#14812,#14813,#14814);+#14812 = CARTESIAN_POINT('',(4.408401242914,-1.45,0.524461625949));+#14813 = DIRECTION('',(0.,1.,0.));+#14814 = DIRECTION('',(0.,0.,1.));+#14815 = DEFINITIONAL_REPRESENTATION('',(#14816),#14824);+#14816 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14817,#14818,#14819,#14820+ ,#14821,#14822,#14823),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14817 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14818 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#14819 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#14820 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#14821 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#14822 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#14823 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#14824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14825 = ORIENTED_EDGE('',*,*,#14826,.T.);+#14826 = EDGE_CURVE('',#14794,#14726,#14827,.T.);+#14827 = SURFACE_CURVE('',#14828,(#14832,#14839),.PCURVE_S1.);+#14828 = LINE('',#14829,#14830);+#14829 = CARTESIAN_POINT('',(3.4975,-1.45,1.3));+#14830 = VECTOR('',#14831,1.);+#14831 = DIRECTION('',(0.,1.,0.));+#14832 = PCURVE('',#14737,#14833);+#14833 = DEFINITIONAL_REPRESENTATION('',(#14834),#14838);+#14834 = LINE('',#14835,#14836);+#14835 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#14836 = VECTOR('',#14837,1.);+#14837 = DIRECTION('',(0.,1.));+#14838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14839 = PCURVE('',#14840,#14845);+#14840 = PLANE('',#14841);+#14841 = AXIS2_PLACEMENT_3D('',#14842,#14843,#14844);+#14842 = CARTESIAN_POINT('',(3.4975,-1.27,1.3));+#14843 = DIRECTION('',(0.,0.,1.));+#14844 = DIRECTION('',(1.,0.,0.));+#14845 = DEFINITIONAL_REPRESENTATION('',(#14846),#14850);+#14846 = LINE('',#14847,#14848);+#14847 = CARTESIAN_POINT('',(0.,-0.18));+#14848 = VECTOR('',#14849,1.);+#14849 = DIRECTION('',(0.,1.));+#14850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14851 = ADVANCED_FACE('',(#14852),#14840,.T.);+#14852 = FACE_BOUND('',#14853,.T.);+#14853 = EDGE_LOOP('',(#14854,#14855,#14878,#14906));+#14854 = ORIENTED_EDGE('',*,*,#14826,.F.);+#14855 = ORIENTED_EDGE('',*,*,#14856,.T.);+#14856 = EDGE_CURVE('',#14794,#14857,#14859,.T.);+#14857 = VERTEX_POINT('',#14858);+#14858 = CARTESIAN_POINT('',(3.763569972422,-1.45,1.3));+#14859 = SURFACE_CURVE('',#14860,(#14864,#14871),.PCURVE_S1.);+#14860 = LINE('',#14861,#14862);+#14861 = CARTESIAN_POINT('',(3.4975,-1.45,1.3));+#14862 = VECTOR('',#14863,1.);+#14863 = DIRECTION('',(1.,0.,0.));+#14864 = PCURVE('',#14840,#14865);+#14865 = DEFINITIONAL_REPRESENTATION('',(#14866),#14870);+#14866 = LINE('',#14867,#14868);+#14867 = CARTESIAN_POINT('',(0.,-0.18));+#14868 = VECTOR('',#14869,1.);+#14869 = DIRECTION('',(1.,0.));+#14870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14871 = PCURVE('',#14810,#14872);+#14872 = DEFINITIONAL_REPRESENTATION('',(#14873),#14877);+#14873 = LINE('',#14874,#14875);+#14874 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#14875 = VECTOR('',#14876,1.);+#14876 = DIRECTION('',(0.,1.));+#14877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14878 = ORIENTED_EDGE('',*,*,#14879,.T.);+#14879 = EDGE_CURVE('',#14857,#14880,#14882,.T.);+#14880 = VERTEX_POINT('',#14881);+#14881 = CARTESIAN_POINT('',(3.763569972422,-1.09,1.3));+#14882 = SURFACE_CURVE('',#14883,(#14887,#14894),.PCURVE_S1.);+#14883 = LINE('',#14884,#14885);+#14884 = CARTESIAN_POINT('',(3.763569972422,-1.45,1.3));+#14885 = VECTOR('',#14886,1.);+#14886 = DIRECTION('',(0.,1.,0.));+#14887 = PCURVE('',#14840,#14888);+#14888 = DEFINITIONAL_REPRESENTATION('',(#14889),#14893);+#14889 = LINE('',#14890,#14891);+#14890 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#14891 = VECTOR('',#14892,1.);+#14892 = DIRECTION('',(0.,1.));+#14893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14894 = PCURVE('',#14895,#14900);+#14895 = CYLINDRICAL_SURFACE('',#14896,0.28);+#14896 = AXIS2_PLACEMENT_3D('',#14897,#14898,#14899);+#14897 = CARTESIAN_POINT('',(3.763569972422,-1.27,1.02));+#14898 = DIRECTION('',(0.,1.,0.));+#14899 = DIRECTION('',(0.,0.,1.));+#14900 = DEFINITIONAL_REPRESENTATION('',(#14901),#14905);+#14901 = LINE('',#14902,#14903);+#14902 = CARTESIAN_POINT('',(0.,-0.18));+#14903 = VECTOR('',#14904,1.);+#14904 = DIRECTION('',(-0.,1.));+#14905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14906 = ORIENTED_EDGE('',*,*,#14907,.F.);+#14907 = EDGE_CURVE('',#14726,#14880,#14908,.T.);+#14908 = SURFACE_CURVE('',#14909,(#14913,#14920),.PCURVE_S1.);+#14909 = LINE('',#14910,#14911);+#14910 = CARTESIAN_POINT('',(3.4975,-1.09,1.3));+#14911 = VECTOR('',#14912,1.);+#14912 = DIRECTION('',(1.,0.,0.));+#14913 = PCURVE('',#14840,#14914);+#14914 = DEFINITIONAL_REPRESENTATION('',(#14915),#14919);+#14915 = LINE('',#14916,#14917);+#14916 = CARTESIAN_POINT('',(0.,0.18));+#14917 = VECTOR('',#14918,1.);+#14918 = DIRECTION('',(1.,0.));+#14919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14920 = PCURVE('',#14749,#14921);+#14921 = DEFINITIONAL_REPRESENTATION('',(#14922),#14926);+#14922 = LINE('',#14923,#14924);+#14923 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#14924 = VECTOR('',#14925,1.);+#14925 = DIRECTION('',(0.,1.));+#14926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14927 = ADVANCED_FACE('',(#14928),#14749,.T.);+#14928 = FACE_BOUND('',#14929,.T.);+#14929 = EDGE_LOOP('',(#14930,#14931,#14932,#14956,#14984,#15013,#15041,+ #15069,#15097,#15126,#15154,#15183,#15211,#15244));+#14930 = ORIENTED_EDGE('',*,*,#14725,.F.);+#14931 = ORIENTED_EDGE('',*,*,#14907,.T.);+#14932 = ORIENTED_EDGE('',*,*,#14933,.T.);+#14933 = EDGE_CURVE('',#14880,#14934,#14936,.T.);+#14934 = VERTEX_POINT('',#14935);+#14935 = CARTESIAN_POINT('',(4.006065227246,-1.09,1.159985897103));+#14936 = SURFACE_CURVE('',#14937,(#14942,#14949),.PCURVE_S1.);+#14937 = CIRCLE('',#14938,0.28);+#14938 = AXIS2_PLACEMENT_3D('',#14939,#14940,#14941);+#14939 = CARTESIAN_POINT('',(3.763569972422,-1.09,1.02));+#14940 = DIRECTION('',(0.,1.,0.));+#14941 = DIRECTION('',(0.,0.,1.));+#14942 = PCURVE('',#14749,#14943);+#14943 = DEFINITIONAL_REPRESENTATION('',(#14944),#14948);+#14944 = CIRCLE('',#14945,0.28);+#14945 = AXIS2_PLACEMENT_2D('',#14946,#14947);+#14946 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#14947 = DIRECTION('',(1.,0.));+#14948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14949 = PCURVE('',#14895,#14950);+#14950 = DEFINITIONAL_REPRESENTATION('',(#14951),#14955);+#14951 = LINE('',#14952,#14953);+#14952 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#14953 = VECTOR('',#14954,1.);+#14954 = DIRECTION('',(1.,-0.));+#14955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14956 = ORIENTED_EDGE('',*,*,#14957,.T.);+#14957 = EDGE_CURVE('',#14934,#14958,#14960,.T.);+#14958 = VERTEX_POINT('',#14959);+#14959 = CARTESIAN_POINT('',(4.537145669057,-1.09,0.240004029399));+#14960 = SURFACE_CURVE('',#14961,(#14965,#14972),.PCURVE_S1.);+#14961 = LINE('',#14962,#14963);+#14962 = CARTESIAN_POINT('',(3.954105448151,-1.09,1.249994963251));+#14963 = VECTOR('',#14964,1.);+#14964 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#14965 = PCURVE('',#14749,#14966);+#14966 = DEFINITIONAL_REPRESENTATION('',(#14967),#14971);+#14967 = LINE('',#14968,#14969);+#14968 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#14969 = VECTOR('',#14970,1.);+#14970 = DIRECTION('',(-0.866054481515,0.499949632511));+#14971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14972 = PCURVE('',#14973,#14978);+#14973 = PLANE('',#14974);+#14974 = AXIS2_PLACEMENT_3D('',#14975,#14976,#14977);+#14975 = CARTESIAN_POINT('',(4.006065227246,-1.27,1.159985897103));+#14976 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#14977 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#14978 = DEFINITIONAL_REPRESENTATION('',(#14979),#14983);+#14979 = LINE('',#14980,#14981);+#14980 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#14981 = VECTOR('',#14982,1.);+#14982 = DIRECTION('',(1.,0.));+#14983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14984 = ORIENTED_EDGE('',*,*,#14985,.F.);+#14985 = EDGE_CURVE('',#14986,#14958,#14988,.T.);+#14986 = VERTEX_POINT('',#14987);+#14987 = CARTESIAN_POINT('',(4.606430027578,-1.09,0.2));+#14988 = SURFACE_CURVE('',#14989,(#14994,#15001),.PCURVE_S1.);+#14989 = CIRCLE('',#14990,8.E-02);+#14990 = AXIS2_PLACEMENT_3D('',#14991,#14992,#14993);+#14991 = CARTESIAN_POINT('',(4.606430027578,-1.09,0.28));+#14992 = DIRECTION('',(0.,1.,0.));+#14993 = DIRECTION('',(0.,0.,1.));+#14994 = PCURVE('',#14749,#14995);+#14995 = DEFINITIONAL_REPRESENTATION('',(#14996),#15000);+#14996 = CIRCLE('',#14997,8.E-02);+#14997 = AXIS2_PLACEMENT_2D('',#14998,#14999);+#14998 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#14999 = DIRECTION('',(1.,0.));+#15000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15001 = PCURVE('',#15002,#15007);+#15002 = CYLINDRICAL_SURFACE('',#15003,8.E-02);+#15003 = AXIS2_PLACEMENT_3D('',#15004,#15005,#15006);+#15004 = CARTESIAN_POINT('',(4.606430027578,-1.27,0.28));+#15005 = DIRECTION('',(0.,1.,0.));+#15006 = DIRECTION('',(0.,0.,1.));+#15007 = DEFINITIONAL_REPRESENTATION('',(#15008),#15012);+#15008 = LINE('',#15009,#15010);+#15009 = CARTESIAN_POINT('',(-0.,0.18));+#15010 = VECTOR('',#15011,1.);+#15011 = DIRECTION('',(1.,-0.));+#15012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15013 = ORIENTED_EDGE('',*,*,#15014,.T.);+#15014 = EDGE_CURVE('',#14986,#15015,#15017,.T.);+#15015 = VERTEX_POINT('',#15016);+#15016 = CARTESIAN_POINT('',(5.255,-1.09,0.2));+#15017 = SURFACE_CURVE('',#15018,(#15022,#15029),.PCURVE_S1.);+#15018 = LINE('',#15019,#15020);+#15019 = CARTESIAN_POINT('',(4.5025,-1.09,0.2));+#15020 = VECTOR('',#15021,1.);+#15021 = DIRECTION('',(1.,0.,0.));+#15022 = PCURVE('',#14749,#15023);+#15023 = DEFINITIONAL_REPRESENTATION('',(#15024),#15028);+#15024 = LINE('',#15025,#15026);+#15025 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#15026 = VECTOR('',#15027,1.);+#15027 = DIRECTION('',(0.,1.));+#15028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15029 = PCURVE('',#15030,#15035);+#15030 = PLANE('',#15031);+#15031 = AXIS2_PLACEMENT_3D('',#15032,#15033,#15034);+#15032 = CARTESIAN_POINT('',(4.606430027578,-1.27,0.2));+#15033 = DIRECTION('',(0.,0.,1.));+#15034 = DIRECTION('',(1.,0.,0.));+#15035 = DEFINITIONAL_REPRESENTATION('',(#15036),#15040);+#15036 = LINE('',#15037,#15038);+#15037 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#15038 = VECTOR('',#15039,1.);+#15039 = DIRECTION('',(1.,0.));+#15040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15041 = ORIENTED_EDGE('',*,*,#15042,.T.);+#15042 = EDGE_CURVE('',#15015,#15043,#15045,.T.);+#15043 = VERTEX_POINT('',#15044);+#15044 = CARTESIAN_POINT('',(5.255,-1.09,0.));+#15045 = SURFACE_CURVE('',#15046,(#15050,#15057),.PCURVE_S1.);+#15046 = LINE('',#15047,#15048);+#15047 = CARTESIAN_POINT('',(5.255,-1.09,1.223081297441E-02));+#15048 = VECTOR('',#15049,1.);+#15049 = DIRECTION('',(0.,0.,-1.));+#15050 = PCURVE('',#14749,#15051);+#15051 = DEFINITIONAL_REPRESENTATION('',(#15052),#15056);+#15052 = LINE('',#15053,#15054);+#15053 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#15054 = VECTOR('',#15055,1.);+#15055 = DIRECTION('',(-1.,0.));+#15056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15057 = PCURVE('',#15058,#15063);+#15058 = PLANE('',#15059);+#15059 = AXIS2_PLACEMENT_3D('',#15060,#15061,#15062);+#15060 = CARTESIAN_POINT('',(5.255,-1.95,-0.5));+#15061 = DIRECTION('',(1.,0.,0.));+#15062 = DIRECTION('',(0.,0.,1.));+#15063 = DEFINITIONAL_REPRESENTATION('',(#15064),#15068);+#15064 = LINE('',#15065,#15066);+#15065 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#15066 = VECTOR('',#15067,1.);+#15067 = DIRECTION('',(-1.,0.));+#15068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15069 = ORIENTED_EDGE('',*,*,#15070,.F.);+#15070 = EDGE_CURVE('',#15071,#15043,#15073,.T.);+#15071 = VERTEX_POINT('',#15072);+#15072 = CARTESIAN_POINT('',(4.606430027578,-1.09,-5.551115123126E-17));+#15073 = SURFACE_CURVE('',#15074,(#15078,#15085),.PCURVE_S1.);+#15074 = LINE('',#15075,#15076);+#15075 = CARTESIAN_POINT('',(4.5025,-1.09,0.));+#15076 = VECTOR('',#15077,1.);+#15077 = DIRECTION('',(1.,0.,0.));+#15078 = PCURVE('',#14749,#15079);+#15079 = DEFINITIONAL_REPRESENTATION('',(#15080),#15084);+#15080 = LINE('',#15081,#15082);+#15081 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#15082 = VECTOR('',#15083,1.);+#15083 = DIRECTION('',(0.,1.));+#15084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15085 = PCURVE('',#15086,#15091);+#15086 = PLANE('',#15087);+#15087 = AXIS2_PLACEMENT_3D('',#15088,#15089,#15090);+#15088 = CARTESIAN_POINT('',(4.606430027578,-1.27,0.));+#15089 = DIRECTION('',(0.,0.,1.));+#15090 = DIRECTION('',(1.,0.,0.));+#15091 = DEFINITIONAL_REPRESENTATION('',(#15092),#15096);+#15092 = LINE('',#15093,#15094);+#15093 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#15094 = VECTOR('',#15095,1.);+#15095 = DIRECTION('',(1.,0.));+#15096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15097 = ORIENTED_EDGE('',*,*,#15098,.T.);+#15098 = EDGE_CURVE('',#15071,#15099,#15101,.T.);+#15099 = VERTEX_POINT('',#15100);+#15100 = CARTESIAN_POINT('',(4.363934772754,-1.09,0.140014102897));+#15101 = SURFACE_CURVE('',#15102,(#15107,#15114),.PCURVE_S1.);+#15102 = CIRCLE('',#15103,0.28);+#15103 = AXIS2_PLACEMENT_3D('',#15104,#15105,#15106);+#15104 = CARTESIAN_POINT('',(4.606430027578,-1.09,0.28));+#15105 = DIRECTION('',(0.,1.,0.));+#15106 = DIRECTION('',(0.,0.,1.));+#15107 = PCURVE('',#14749,#15108);+#15108 = DEFINITIONAL_REPRESENTATION('',(#15109),#15113);+#15109 = CIRCLE('',#15110,0.28);+#15110 = AXIS2_PLACEMENT_2D('',#15111,#15112);+#15111 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#15112 = DIRECTION('',(1.,0.));+#15113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15114 = PCURVE('',#15115,#15120);+#15115 = CYLINDRICAL_SURFACE('',#15116,0.28);+#15116 = AXIS2_PLACEMENT_3D('',#15117,#15118,#15119);+#15117 = CARTESIAN_POINT('',(4.606430027578,-1.27,0.28));+#15118 = DIRECTION('',(0.,1.,0.));+#15119 = DIRECTION('',(0.,0.,1.));+#15120 = DEFINITIONAL_REPRESENTATION('',(#15121),#15125);+#15121 = LINE('',#15122,#15123);+#15122 = CARTESIAN_POINT('',(-0.,0.18));+#15123 = VECTOR('',#15124,1.);+#15124 = DIRECTION('',(1.,-0.));+#15125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15126 = ORIENTED_EDGE('',*,*,#15127,.F.);+#15127 = EDGE_CURVE('',#15128,#15099,#15130,.T.);+#15128 = VERTEX_POINT('',#15129);+#15129 = CARTESIAN_POINT('',(3.832854330943,-1.09,1.059995970601));+#15130 = SURFACE_CURVE('',#15131,(#15135,#15142),.PCURVE_S1.);+#15131 = LINE('',#15132,#15133);+#15132 = CARTESIAN_POINT('',(3.780894551849,-1.09,1.150005036749));+#15133 = VECTOR('',#15134,1.);+#15134 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#15135 = PCURVE('',#14749,#15136);+#15136 = DEFINITIONAL_REPRESENTATION('',(#15137),#15141);+#15137 = LINE('',#15138,#15139);+#15138 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#15139 = VECTOR('',#15140,1.);+#15140 = DIRECTION('',(-0.866054481515,0.499949632511));+#15141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15142 = PCURVE('',#15143,#15148);+#15143 = PLANE('',#15144);+#15144 = AXIS2_PLACEMENT_3D('',#15145,#15146,#15147);+#15145 = CARTESIAN_POINT('',(3.832854330943,-1.27,1.059995970601));+#15146 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#15147 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#15148 = DEFINITIONAL_REPRESENTATION('',(#15149),#15153);+#15149 = LINE('',#15150,#15151);+#15150 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#15151 = VECTOR('',#15152,1.);+#15152 = DIRECTION('',(1.,0.));+#15153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15154 = ORIENTED_EDGE('',*,*,#15155,.F.);+#15155 = EDGE_CURVE('',#15156,#15128,#15158,.T.);+#15156 = VERTEX_POINT('',#15157);+#15157 = CARTESIAN_POINT('',(3.763569972422,-1.09,1.1));+#15158 = SURFACE_CURVE('',#15159,(#15164,#15171),.PCURVE_S1.);+#15159 = CIRCLE('',#15160,8.E-02);+#15160 = AXIS2_PLACEMENT_3D('',#15161,#15162,#15163);+#15161 = CARTESIAN_POINT('',(3.763569972422,-1.09,1.02));+#15162 = DIRECTION('',(0.,1.,0.));+#15163 = DIRECTION('',(0.,0.,1.));+#15164 = PCURVE('',#14749,#15165);+#15165 = DEFINITIONAL_REPRESENTATION('',(#15166),#15170);+#15166 = CIRCLE('',#15167,8.E-02);+#15167 = AXIS2_PLACEMENT_2D('',#15168,#15169);+#15168 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#15169 = DIRECTION('',(1.,0.));+#15170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15171 = PCURVE('',#15172,#15177);+#15172 = CYLINDRICAL_SURFACE('',#15173,8.E-02);+#15173 = AXIS2_PLACEMENT_3D('',#15174,#15175,#15176);+#15174 = CARTESIAN_POINT('',(3.763569972422,-1.27,1.02));+#15175 = DIRECTION('',(0.,1.,0.));+#15176 = DIRECTION('',(0.,0.,1.));+#15177 = DEFINITIONAL_REPRESENTATION('',(#15178),#15182);+#15178 = LINE('',#15179,#15180);+#15179 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#15180 = VECTOR('',#15181,1.);+#15181 = DIRECTION('',(1.,-0.));+#15182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15183 = ORIENTED_EDGE('',*,*,#15184,.F.);+#15184 = EDGE_CURVE('',#15185,#15156,#15187,.T.);+#15185 = VERTEX_POINT('',#15186);+#15186 = CARTESIAN_POINT('',(3.4975,-1.09,1.1));+#15187 = SURFACE_CURVE('',#15188,(#15192,#15199),.PCURVE_S1.);+#15188 = LINE('',#15189,#15190);+#15189 = CARTESIAN_POINT('',(3.4975,-1.09,1.1));+#15190 = VECTOR('',#15191,1.);+#15191 = DIRECTION('',(1.,0.,0.));+#15192 = PCURVE('',#14749,#15193);+#15193 = DEFINITIONAL_REPRESENTATION('',(#15194),#15198);+#15194 = LINE('',#15195,#15196);+#15195 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#15196 = VECTOR('',#15197,1.);+#15197 = DIRECTION('',(0.,1.));+#15198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15199 = PCURVE('',#15200,#15205);+#15200 = PLANE('',#15201);+#15201 = AXIS2_PLACEMENT_3D('',#15202,#15203,#15204);+#15202 = CARTESIAN_POINT('',(3.4975,-1.27,1.1));+#15203 = DIRECTION('',(0.,0.,1.));+#15204 = DIRECTION('',(1.,0.,0.));+#15205 = DEFINITIONAL_REPRESENTATION('',(#15206),#15210);+#15206 = LINE('',#15207,#15208);+#15207 = CARTESIAN_POINT('',(0.,0.18));+#15208 = VECTOR('',#15209,1.);+#15209 = DIRECTION('',(1.,0.));+#15210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15211 = ORIENTED_EDGE('',*,*,#15212,.F.);+#15212 = EDGE_CURVE('',#15213,#15185,#15215,.T.);+#15213 = VERTEX_POINT('',#15214);+#15214 = CARTESIAN_POINT('',(3.4475,-1.09,1.113397459622));+#15215 = SURFACE_CURVE('',#15216,(#15221,#15232),.PCURVE_S1.);+#15216 = CIRCLE('',#15217,0.1);+#15217 = AXIS2_PLACEMENT_3D('',#15218,#15219,#15220);+#15218 = CARTESIAN_POINT('',(3.4975,-1.09,1.2));+#15219 = DIRECTION('',(0.,-1.,0.));+#15220 = DIRECTION('',(1.,0.,0.));+#15221 = PCURVE('',#14749,#15222);+#15222 = DEFINITIONAL_REPRESENTATION('',(#15223),#15231);+#15223 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15224,#15225,#15226,#15227+ ,#15228,#15229,#15230),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15224 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15225 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#15226 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#15227 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#15228 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#15229 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#15230 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15232 = PCURVE('',#15233,#15238);+#15233 = CYLINDRICAL_SURFACE('',#15234,0.1);+#15234 = AXIS2_PLACEMENT_3D('',#15235,#15236,#15237);+#15235 = CARTESIAN_POINT('',(3.4975,-1.27,1.2));+#15236 = DIRECTION('',(0.,1.,0.));+#15237 = DIRECTION('',(1.,0.,0.));+#15238 = DEFINITIONAL_REPRESENTATION('',(#15239),#15243);+#15239 = LINE('',#15240,#15241);+#15240 = CARTESIAN_POINT('',(6.28318530718,0.18));+#15241 = VECTOR('',#15242,1.);+#15242 = DIRECTION('',(-1.,-0.));+#15243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15244 = ORIENTED_EDGE('',*,*,#15245,.F.);+#15245 = EDGE_CURVE('',#14728,#15213,#15246,.T.);+#15246 = SURFACE_CURVE('',#15247,(#15251,#15258),.PCURVE_S1.);+#15247 = LINE('',#15248,#15249);+#15248 = CARTESIAN_POINT('',(3.4475,-1.09,1.223081297441E-02));+#15249 = VECTOR('',#15250,1.);+#15250 = DIRECTION('',(0.,0.,-1.));+#15251 = PCURVE('',#14749,#15252);+#15252 = DEFINITIONAL_REPRESENTATION('',(#15253),#15257);+#15253 = LINE('',#15254,#15255);+#15254 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#15255 = VECTOR('',#15256,1.);+#15256 = DIRECTION('',(-1.,0.));+#15257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15258 = PCURVE('',#14781,#15259);+#15259 = DEFINITIONAL_REPRESENTATION('',(#15260),#15264);+#15260 = LINE('',#15261,#15262);+#15261 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#15262 = VECTOR('',#15263,1.);+#15263 = DIRECTION('',(-1.,0.));+#15264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15265 = ADVANCED_FACE('',(#15266),#14781,.F.);+#15266 = FACE_BOUND('',#15267,.F.);+#15267 = EDGE_LOOP('',(#15268,#15269,#15292,#15313));+#15268 = ORIENTED_EDGE('',*,*,#14765,.F.);+#15269 = ORIENTED_EDGE('',*,*,#15270,.T.);+#15270 = EDGE_CURVE('',#14766,#15271,#15273,.T.);+#15271 = VERTEX_POINT('',#15272);+#15272 = CARTESIAN_POINT('',(3.4475,-1.45,1.113397459622));+#15273 = SURFACE_CURVE('',#15274,(#15278,#15285),.PCURVE_S1.);+#15274 = LINE('',#15275,#15276);+#15275 = CARTESIAN_POINT('',(3.4475,-1.45,1.223081297441E-02));+#15276 = VECTOR('',#15277,1.);+#15277 = DIRECTION('',(0.,0.,-1.));+#15278 = PCURVE('',#14781,#15279);+#15279 = DEFINITIONAL_REPRESENTATION('',(#15280),#15284);+#15280 = LINE('',#15281,#15282);+#15281 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#15282 = VECTOR('',#15283,1.);+#15283 = DIRECTION('',(-1.,0.));+#15284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15285 = PCURVE('',#14810,#15286);+#15286 = DEFINITIONAL_REPRESENTATION('',(#15287),#15291);+#15287 = LINE('',#15288,#15289);+#15288 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#15289 = VECTOR('',#15290,1.);+#15290 = DIRECTION('',(-1.,0.));+#15291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15292 = ORIENTED_EDGE('',*,*,#15293,.T.);+#15293 = EDGE_CURVE('',#15271,#15213,#15294,.T.);+#15294 = SURFACE_CURVE('',#15295,(#15299,#15306),.PCURVE_S1.);+#15295 = LINE('',#15296,#15297);+#15296 = CARTESIAN_POINT('',(3.4475,-1.27,1.113397459622));+#15297 = VECTOR('',#15298,1.);+#15298 = DIRECTION('',(0.,1.,0.));+#15299 = PCURVE('',#14781,#15300);+#15300 = DEFINITIONAL_REPRESENTATION('',(#15301),#15305);+#15301 = LINE('',#15302,#15303);+#15302 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#15303 = VECTOR('',#15304,1.);+#15304 = DIRECTION('',(0.,-1.));+#15305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15306 = PCURVE('',#15233,#15307);+#15307 = DEFINITIONAL_REPRESENTATION('',(#15308),#15312);+#15308 = LINE('',#15309,#15310);+#15309 = CARTESIAN_POINT('',(2.094395102394,0.));+#15310 = VECTOR('',#15311,1.);+#15311 = DIRECTION('',(-0.,1.));+#15312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15313 = ORIENTED_EDGE('',*,*,#15245,.F.);+#15314 = ADVANCED_FACE('',(#15315),#14810,.F.);+#15315 = FACE_BOUND('',#15316,.F.);+#15316 = EDGE_LOOP('',(#15317,#15318,#15319,#15343,#15366,#15390,#15413,+ #15436,#15459,#15483,#15506,#15530,#15553,#15579));+#15317 = ORIENTED_EDGE('',*,*,#14793,.F.);+#15318 = ORIENTED_EDGE('',*,*,#14856,.T.);+#15319 = ORIENTED_EDGE('',*,*,#15320,.T.);+#15320 = EDGE_CURVE('',#14857,#15321,#15323,.T.);+#15321 = VERTEX_POINT('',#15322);+#15322 = CARTESIAN_POINT('',(4.006065227246,-1.45,1.159985897103));+#15323 = SURFACE_CURVE('',#15324,(#15329,#15336),.PCURVE_S1.);+#15324 = CIRCLE('',#15325,0.28);+#15325 = AXIS2_PLACEMENT_3D('',#15326,#15327,#15328);+#15326 = CARTESIAN_POINT('',(3.763569972422,-1.45,1.02));+#15327 = DIRECTION('',(0.,1.,0.));+#15328 = DIRECTION('',(0.,0.,1.));+#15329 = PCURVE('',#14810,#15330);+#15330 = DEFINITIONAL_REPRESENTATION('',(#15331),#15335);+#15331 = CIRCLE('',#15332,0.28);+#15332 = AXIS2_PLACEMENT_2D('',#15333,#15334);+#15333 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#15334 = DIRECTION('',(1.,0.));+#15335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15336 = PCURVE('',#14895,#15337);+#15337 = DEFINITIONAL_REPRESENTATION('',(#15338),#15342);+#15338 = LINE('',#15339,#15340);+#15339 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#15340 = VECTOR('',#15341,1.);+#15341 = DIRECTION('',(1.,0.));+#15342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15343 = ORIENTED_EDGE('',*,*,#15344,.T.);+#15344 = EDGE_CURVE('',#15321,#15345,#15347,.T.);+#15345 = VERTEX_POINT('',#15346);+#15346 = CARTESIAN_POINT('',(4.537145669057,-1.45,0.240004029399));+#15347 = SURFACE_CURVE('',#15348,(#15352,#15359),.PCURVE_S1.);+#15348 = LINE('',#15349,#15350);+#15349 = CARTESIAN_POINT('',(3.954105448151,-1.45,1.249994963251));+#15350 = VECTOR('',#15351,1.);+#15351 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#15352 = PCURVE('',#14810,#15353);+#15353 = DEFINITIONAL_REPRESENTATION('',(#15354),#15358);+#15354 = LINE('',#15355,#15356);+#15355 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#15356 = VECTOR('',#15357,1.);+#15357 = DIRECTION('',(-0.866054481515,0.499949632511));+#15358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15359 = PCURVE('',#14973,#15360);+#15360 = DEFINITIONAL_REPRESENTATION('',(#15361),#15365);+#15361 = LINE('',#15362,#15363);+#15362 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#15363 = VECTOR('',#15364,1.);+#15364 = DIRECTION('',(1.,0.));+#15365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15366 = ORIENTED_EDGE('',*,*,#15367,.F.);+#15367 = EDGE_CURVE('',#15368,#15345,#15370,.T.);+#15368 = VERTEX_POINT('',#15369);+#15369 = CARTESIAN_POINT('',(4.606430027578,-1.45,0.2));+#15370 = SURFACE_CURVE('',#15371,(#15376,#15383),.PCURVE_S1.);+#15371 = CIRCLE('',#15372,8.E-02);+#15372 = AXIS2_PLACEMENT_3D('',#15373,#15374,#15375);+#15373 = CARTESIAN_POINT('',(4.606430027578,-1.45,0.28));+#15374 = DIRECTION('',(0.,1.,0.));+#15375 = DIRECTION('',(0.,0.,1.));+#15376 = PCURVE('',#14810,#15377);+#15377 = DEFINITIONAL_REPRESENTATION('',(#15378),#15382);+#15378 = CIRCLE('',#15379,8.E-02);+#15379 = AXIS2_PLACEMENT_2D('',#15380,#15381);+#15380 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#15381 = DIRECTION('',(1.,0.));+#15382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15383 = PCURVE('',#15002,#15384);+#15384 = DEFINITIONAL_REPRESENTATION('',(#15385),#15389);+#15385 = LINE('',#15386,#15387);+#15386 = CARTESIAN_POINT('',(0.,-0.18));+#15387 = VECTOR('',#15388,1.);+#15388 = DIRECTION('',(1.,0.));+#15389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15390 = ORIENTED_EDGE('',*,*,#15391,.T.);+#15391 = EDGE_CURVE('',#15368,#15392,#15394,.T.);+#15392 = VERTEX_POINT('',#15393);+#15393 = CARTESIAN_POINT('',(5.255,-1.45,0.2));+#15394 = SURFACE_CURVE('',#15395,(#15399,#15406),.PCURVE_S1.);+#15395 = LINE('',#15396,#15397);+#15396 = CARTESIAN_POINT('',(4.5025,-1.45,0.2));+#15397 = VECTOR('',#15398,1.);+#15398 = DIRECTION('',(1.,0.,0.));+#15399 = PCURVE('',#14810,#15400);+#15400 = DEFINITIONAL_REPRESENTATION('',(#15401),#15405);+#15401 = LINE('',#15402,#15403);+#15402 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#15403 = VECTOR('',#15404,1.);+#15404 = DIRECTION('',(0.,1.));+#15405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15406 = PCURVE('',#15030,#15407);+#15407 = DEFINITIONAL_REPRESENTATION('',(#15408),#15412);+#15408 = LINE('',#15409,#15410);+#15409 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#15410 = VECTOR('',#15411,1.);+#15411 = DIRECTION('',(1.,0.));+#15412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15413 = ORIENTED_EDGE('',*,*,#15414,.T.);+#15414 = EDGE_CURVE('',#15392,#15415,#15417,.T.);+#15415 = VERTEX_POINT('',#15416);+#15416 = CARTESIAN_POINT('',(5.255,-1.45,0.));+#15417 = SURFACE_CURVE('',#15418,(#15422,#15429),.PCURVE_S1.);+#15418 = LINE('',#15419,#15420);+#15419 = CARTESIAN_POINT('',(5.255,-1.45,1.223081297441E-02));+#15420 = VECTOR('',#15421,1.);+#15421 = DIRECTION('',(0.,0.,-1.));+#15422 = PCURVE('',#14810,#15423);+#15423 = DEFINITIONAL_REPRESENTATION('',(#15424),#15428);+#15424 = LINE('',#15425,#15426);+#15425 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#15426 = VECTOR('',#15427,1.);+#15427 = DIRECTION('',(-1.,0.));+#15428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15429 = PCURVE('',#15058,#15430);+#15430 = DEFINITIONAL_REPRESENTATION('',(#15431),#15435);+#15431 = LINE('',#15432,#15433);+#15432 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#15433 = VECTOR('',#15434,1.);+#15434 = DIRECTION('',(-1.,0.));+#15435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15436 = ORIENTED_EDGE('',*,*,#15437,.F.);+#15437 = EDGE_CURVE('',#15438,#15415,#15440,.T.);+#15438 = VERTEX_POINT('',#15439);+#15439 = CARTESIAN_POINT('',(4.606430027578,-1.45,-5.551115123126E-17));+#15440 = SURFACE_CURVE('',#15441,(#15445,#15452),.PCURVE_S1.);+#15441 = LINE('',#15442,#15443);+#15442 = CARTESIAN_POINT('',(4.5025,-1.45,0.));+#15443 = VECTOR('',#15444,1.);+#15444 = DIRECTION('',(1.,0.,0.));+#15445 = PCURVE('',#14810,#15446);+#15446 = DEFINITIONAL_REPRESENTATION('',(#15447),#15451);+#15447 = LINE('',#15448,#15449);+#15448 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#15449 = VECTOR('',#15450,1.);+#15450 = DIRECTION('',(0.,1.));+#15451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15452 = PCURVE('',#15086,#15453);+#15453 = DEFINITIONAL_REPRESENTATION('',(#15454),#15458);+#15454 = LINE('',#15455,#15456);+#15455 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#15456 = VECTOR('',#15457,1.);+#15457 = DIRECTION('',(1.,0.));+#15458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15459 = ORIENTED_EDGE('',*,*,#15460,.T.);+#15460 = EDGE_CURVE('',#15438,#15461,#15463,.T.);+#15461 = VERTEX_POINT('',#15462);+#15462 = CARTESIAN_POINT('',(4.363934772754,-1.45,0.140014102897));+#15463 = SURFACE_CURVE('',#15464,(#15469,#15476),.PCURVE_S1.);+#15464 = CIRCLE('',#15465,0.28);+#15465 = AXIS2_PLACEMENT_3D('',#15466,#15467,#15468);+#15466 = CARTESIAN_POINT('',(4.606430027578,-1.45,0.28));+#15467 = DIRECTION('',(0.,1.,0.));+#15468 = DIRECTION('',(0.,0.,1.));+#15469 = PCURVE('',#14810,#15470);+#15470 = DEFINITIONAL_REPRESENTATION('',(#15471),#15475);+#15471 = CIRCLE('',#15472,0.28);+#15472 = AXIS2_PLACEMENT_2D('',#15473,#15474);+#15473 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#15474 = DIRECTION('',(1.,0.));+#15475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15476 = PCURVE('',#15115,#15477);+#15477 = DEFINITIONAL_REPRESENTATION('',(#15478),#15482);+#15478 = LINE('',#15479,#15480);+#15479 = CARTESIAN_POINT('',(0.,-0.18));+#15480 = VECTOR('',#15481,1.);+#15481 = DIRECTION('',(1.,0.));+#15482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15483 = ORIENTED_EDGE('',*,*,#15484,.F.);+#15484 = EDGE_CURVE('',#15485,#15461,#15487,.T.);+#15485 = VERTEX_POINT('',#15486);+#15486 = CARTESIAN_POINT('',(3.832854330943,-1.45,1.059995970601));+#15487 = SURFACE_CURVE('',#15488,(#15492,#15499),.PCURVE_S1.);+#15488 = LINE('',#15489,#15490);+#15489 = CARTESIAN_POINT('',(3.780894551849,-1.45,1.150005036749));+#15490 = VECTOR('',#15491,1.);+#15491 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#15492 = PCURVE('',#14810,#15493);+#15493 = DEFINITIONAL_REPRESENTATION('',(#15494),#15498);+#15494 = LINE('',#15495,#15496);+#15495 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#15496 = VECTOR('',#15497,1.);+#15497 = DIRECTION('',(-0.866054481515,0.499949632511));+#15498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15499 = PCURVE('',#15143,#15500);+#15500 = DEFINITIONAL_REPRESENTATION('',(#15501),#15505);+#15501 = LINE('',#15502,#15503);+#15502 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#15503 = VECTOR('',#15504,1.);+#15504 = DIRECTION('',(1.,0.));+#15505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15506 = ORIENTED_EDGE('',*,*,#15507,.F.);+#15507 = EDGE_CURVE('',#15508,#15485,#15510,.T.);+#15508 = VERTEX_POINT('',#15509);+#15509 = CARTESIAN_POINT('',(3.763569972422,-1.45,1.1));+#15510 = SURFACE_CURVE('',#15511,(#15516,#15523),.PCURVE_S1.);+#15511 = CIRCLE('',#15512,8.E-02);+#15512 = AXIS2_PLACEMENT_3D('',#15513,#15514,#15515);+#15513 = CARTESIAN_POINT('',(3.763569972422,-1.45,1.02));+#15514 = DIRECTION('',(0.,1.,0.));+#15515 = DIRECTION('',(0.,0.,1.));+#15516 = PCURVE('',#14810,#15517);+#15517 = DEFINITIONAL_REPRESENTATION('',(#15518),#15522);+#15518 = CIRCLE('',#15519,8.E-02);+#15519 = AXIS2_PLACEMENT_2D('',#15520,#15521);+#15520 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#15521 = DIRECTION('',(1.,0.));+#15522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15523 = PCURVE('',#15172,#15524);+#15524 = DEFINITIONAL_REPRESENTATION('',(#15525),#15529);+#15525 = LINE('',#15526,#15527);+#15526 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#15527 = VECTOR('',#15528,1.);+#15528 = DIRECTION('',(1.,0.));+#15529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15530 = ORIENTED_EDGE('',*,*,#15531,.F.);+#15531 = EDGE_CURVE('',#15532,#15508,#15534,.T.);+#15532 = VERTEX_POINT('',#15533);+#15533 = CARTESIAN_POINT('',(3.4975,-1.45,1.1));+#15534 = SURFACE_CURVE('',#15535,(#15539,#15546),.PCURVE_S1.);+#15535 = LINE('',#15536,#15537);+#15536 = CARTESIAN_POINT('',(3.4975,-1.45,1.1));+#15537 = VECTOR('',#15538,1.);+#15538 = DIRECTION('',(1.,0.,0.));+#15539 = PCURVE('',#14810,#15540);+#15540 = DEFINITIONAL_REPRESENTATION('',(#15541),#15545);+#15541 = LINE('',#15542,#15543);+#15542 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#15543 = VECTOR('',#15544,1.);+#15544 = DIRECTION('',(0.,1.));+#15545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15546 = PCURVE('',#15200,#15547);+#15547 = DEFINITIONAL_REPRESENTATION('',(#15548),#15552);+#15548 = LINE('',#15549,#15550);+#15549 = CARTESIAN_POINT('',(0.,-0.18));+#15550 = VECTOR('',#15551,1.);+#15551 = DIRECTION('',(1.,0.));+#15552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15553 = ORIENTED_EDGE('',*,*,#15554,.F.);+#15554 = EDGE_CURVE('',#15271,#15532,#15555,.T.);+#15555 = SURFACE_CURVE('',#15556,(#15561,#15572),.PCURVE_S1.);+#15556 = CIRCLE('',#15557,0.1);+#15557 = AXIS2_PLACEMENT_3D('',#15558,#15559,#15560);+#15558 = CARTESIAN_POINT('',(3.4975,-1.45,1.2));+#15559 = DIRECTION('',(0.,-1.,0.));+#15560 = DIRECTION('',(1.,0.,0.));+#15561 = PCURVE('',#14810,#15562);+#15562 = DEFINITIONAL_REPRESENTATION('',(#15563),#15571);+#15563 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15564,#15565,#15566,#15567+ ,#15568,#15569,#15570),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15564 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15565 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#15566 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#15567 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#15568 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#15569 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#15570 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15572 = PCURVE('',#15233,#15573);+#15573 = DEFINITIONAL_REPRESENTATION('',(#15574),#15578);+#15574 = LINE('',#15575,#15576);+#15575 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#15576 = VECTOR('',#15577,1.);+#15577 = DIRECTION('',(-1.,0.));+#15578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15579 = ORIENTED_EDGE('',*,*,#15270,.F.);+#15580 = ADVANCED_FACE('',(#15581),#14895,.T.);+#15581 = FACE_BOUND('',#15582,.T.);+#15582 = EDGE_LOOP('',(#15583,#15584,#15585,#15606));+#15583 = ORIENTED_EDGE('',*,*,#14879,.F.);+#15584 = ORIENTED_EDGE('',*,*,#15320,.T.);+#15585 = ORIENTED_EDGE('',*,*,#15586,.T.);+#15586 = EDGE_CURVE('',#15321,#14934,#15587,.T.);+#15587 = SURFACE_CURVE('',#15588,(#15592,#15599),.PCURVE_S1.);+#15588 = LINE('',#15589,#15590);+#15589 = CARTESIAN_POINT('',(4.006065227246,-1.45,1.159985897103));+#15590 = VECTOR('',#15591,1.);+#15591 = DIRECTION('',(0.,1.,0.));+#15592 = PCURVE('',#14895,#15593);+#15593 = DEFINITIONAL_REPRESENTATION('',(#15594),#15598);+#15594 = LINE('',#15595,#15596);+#15595 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#15596 = VECTOR('',#15597,1.);+#15597 = DIRECTION('',(-0.,1.));+#15598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15599 = PCURVE('',#14973,#15600);+#15600 = DEFINITIONAL_REPRESENTATION('',(#15601),#15605);+#15601 = LINE('',#15602,#15603);+#15602 = CARTESIAN_POINT('',(0.,-0.18));+#15603 = VECTOR('',#15604,1.);+#15604 = DIRECTION('',(0.,1.));+#15605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15606 = ORIENTED_EDGE('',*,*,#14933,.F.);+#15607 = ADVANCED_FACE('',(#15608),#15233,.T.);+#15608 = FACE_BOUND('',#15609,.T.);+#15609 = EDGE_LOOP('',(#15610,#15611,#15632,#15633));+#15610 = ORIENTED_EDGE('',*,*,#15212,.T.);+#15611 = ORIENTED_EDGE('',*,*,#15612,.T.);+#15612 = EDGE_CURVE('',#15185,#15532,#15613,.T.);+#15613 = SURFACE_CURVE('',#15614,(#15618,#15625),.PCURVE_S1.);+#15614 = LINE('',#15615,#15616);+#15615 = CARTESIAN_POINT('',(3.4975,-1.09,1.1));+#15616 = VECTOR('',#15617,1.);+#15617 = DIRECTION('',(0.,-1.,0.));+#15618 = PCURVE('',#15233,#15619);+#15619 = DEFINITIONAL_REPRESENTATION('',(#15620),#15624);+#15620 = LINE('',#15621,#15622);+#15621 = CARTESIAN_POINT('',(1.570796326795,0.18));+#15622 = VECTOR('',#15623,1.);+#15623 = DIRECTION('',(-0.,-1.));+#15624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15625 = PCURVE('',#15200,#15626);+#15626 = DEFINITIONAL_REPRESENTATION('',(#15627),#15631);+#15627 = LINE('',#15628,#15629);+#15628 = CARTESIAN_POINT('',(0.,0.18));+#15629 = VECTOR('',#15630,1.);+#15630 = DIRECTION('',(0.,-1.));+#15631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15632 = ORIENTED_EDGE('',*,*,#15554,.F.);+#15633 = ORIENTED_EDGE('',*,*,#15293,.T.);+#15634 = ADVANCED_FACE('',(#15635),#15200,.F.);+#15635 = FACE_BOUND('',#15636,.F.);+#15636 = EDGE_LOOP('',(#15637,#15638,#15659,#15660));+#15637 = ORIENTED_EDGE('',*,*,#15531,.T.);+#15638 = ORIENTED_EDGE('',*,*,#15639,.F.);+#15639 = EDGE_CURVE('',#15156,#15508,#15640,.T.);+#15640 = SURFACE_CURVE('',#15641,(#15645,#15652),.PCURVE_S1.);+#15641 = LINE('',#15642,#15643);+#15642 = CARTESIAN_POINT('',(3.763569972422,-1.09,1.1));+#15643 = VECTOR('',#15644,1.);+#15644 = DIRECTION('',(0.,-1.,0.));+#15645 = PCURVE('',#15200,#15646);+#15646 = DEFINITIONAL_REPRESENTATION('',(#15647),#15651);+#15647 = LINE('',#15648,#15649);+#15648 = CARTESIAN_POINT('',(0.266069972422,0.18));+#15649 = VECTOR('',#15650,1.);+#15650 = DIRECTION('',(0.,-1.));+#15651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15652 = PCURVE('',#15172,#15653);+#15653 = DEFINITIONAL_REPRESENTATION('',(#15654),#15658);+#15654 = LINE('',#15655,#15656);+#15655 = CARTESIAN_POINT('',(0.,0.18));+#15656 = VECTOR('',#15657,1.);+#15657 = DIRECTION('',(0.,-1.));+#15658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15659 = ORIENTED_EDGE('',*,*,#15184,.F.);+#15660 = ORIENTED_EDGE('',*,*,#15612,.T.);+#15661 = ADVANCED_FACE('',(#15662),#15172,.F.);+#15662 = FACE_BOUND('',#15663,.F.);+#15663 = EDGE_LOOP('',(#15664,#15665,#15686,#15687));+#15664 = ORIENTED_EDGE('',*,*,#15507,.T.);+#15665 = ORIENTED_EDGE('',*,*,#15666,.F.);+#15666 = EDGE_CURVE('',#15128,#15485,#15667,.T.);+#15667 = SURFACE_CURVE('',#15668,(#15672,#15679),.PCURVE_S1.);+#15668 = LINE('',#15669,#15670);+#15669 = CARTESIAN_POINT('',(3.832854330943,-1.09,1.059995970601));+#15670 = VECTOR('',#15671,1.);+#15671 = DIRECTION('',(0.,-1.,0.));+#15672 = PCURVE('',#15172,#15673);+#15673 = DEFINITIONAL_REPRESENTATION('',(#15674),#15678);+#15674 = LINE('',#15675,#15676);+#15675 = CARTESIAN_POINT('',(1.047255709587,0.18));+#15676 = VECTOR('',#15677,1.);+#15677 = DIRECTION('',(0.,-1.));+#15678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15679 = PCURVE('',#15143,#15680);+#15680 = DEFINITIONAL_REPRESENTATION('',(#15681),#15685);+#15681 = LINE('',#15682,#15683);+#15682 = CARTESIAN_POINT('',(0.,0.18));+#15683 = VECTOR('',#15684,1.);+#15684 = DIRECTION('',(0.,-1.));+#15685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15686 = ORIENTED_EDGE('',*,*,#15155,.F.);+#15687 = ORIENTED_EDGE('',*,*,#15639,.T.);+#15688 = ADVANCED_FACE('',(#15689),#15143,.F.);+#15689 = FACE_BOUND('',#15690,.F.);+#15690 = EDGE_LOOP('',(#15691,#15692,#15713,#15714));+#15691 = ORIENTED_EDGE('',*,*,#15484,.T.);+#15692 = ORIENTED_EDGE('',*,*,#15693,.F.);+#15693 = EDGE_CURVE('',#15099,#15461,#15694,.T.);+#15694 = SURFACE_CURVE('',#15695,(#15699,#15706),.PCURVE_S1.);+#15695 = LINE('',#15696,#15697);+#15696 = CARTESIAN_POINT('',(4.363934772754,-1.09,0.140014102897));+#15697 = VECTOR('',#15698,1.);+#15698 = DIRECTION('',(0.,-1.,0.));+#15699 = PCURVE('',#15143,#15700);+#15700 = DEFINITIONAL_REPRESENTATION('',(#15701),#15705);+#15701 = LINE('',#15702,#15703);+#15702 = CARTESIAN_POINT('',(1.062267891155,0.18));+#15703 = VECTOR('',#15704,1.);+#15704 = DIRECTION('',(0.,-1.));+#15705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15706 = PCURVE('',#15115,#15707);+#15707 = DEFINITIONAL_REPRESENTATION('',(#15708),#15712);+#15708 = LINE('',#15709,#15710);+#15709 = CARTESIAN_POINT('',(4.188848363177,0.18));+#15710 = VECTOR('',#15711,1.);+#15711 = DIRECTION('',(0.,-1.));+#15712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15713 = ORIENTED_EDGE('',*,*,#15127,.F.);+#15714 = ORIENTED_EDGE('',*,*,#15666,.T.);+#15715 = ADVANCED_FACE('',(#15716),#15115,.T.);+#15716 = FACE_BOUND('',#15717,.T.);+#15717 = EDGE_LOOP('',(#15718,#15719,#15720,#15721));+#15718 = ORIENTED_EDGE('',*,*,#15460,.T.);+#15719 = ORIENTED_EDGE('',*,*,#15693,.F.);+#15720 = ORIENTED_EDGE('',*,*,#15098,.F.);+#15721 = ORIENTED_EDGE('',*,*,#15722,.T.);+#15722 = EDGE_CURVE('',#15071,#15438,#15723,.T.);+#15723 = SURFACE_CURVE('',#15724,(#15728,#15735),.PCURVE_S1.);+#15724 = LINE('',#15725,#15726);+#15725 = CARTESIAN_POINT('',(4.606430027578,-1.09,-5.551115123126E-17));+#15726 = VECTOR('',#15727,1.);+#15727 = DIRECTION('',(0.,-1.,0.));+#15728 = PCURVE('',#15115,#15729);+#15729 = DEFINITIONAL_REPRESENTATION('',(#15730),#15734);+#15730 = LINE('',#15731,#15732);+#15731 = CARTESIAN_POINT('',(3.14159265359,0.18));+#15732 = VECTOR('',#15733,1.);+#15733 = DIRECTION('',(0.,-1.));+#15734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15735 = PCURVE('',#15086,#15736);+#15736 = DEFINITIONAL_REPRESENTATION('',(#15737),#15741);+#15737 = LINE('',#15738,#15739);+#15738 = CARTESIAN_POINT('',(0.,0.18));+#15739 = VECTOR('',#15740,1.);+#15740 = DIRECTION('',(0.,-1.));+#15741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15742 = ADVANCED_FACE('',(#15743),#15086,.F.);+#15743 = FACE_BOUND('',#15744,.F.);+#15744 = EDGE_LOOP('',(#15745,#15746,#15747,#15768));+#15745 = ORIENTED_EDGE('',*,*,#15722,.T.);+#15746 = ORIENTED_EDGE('',*,*,#15437,.T.);+#15747 = ORIENTED_EDGE('',*,*,#15748,.T.);+#15748 = EDGE_CURVE('',#15415,#15043,#15749,.T.);+#15749 = SURFACE_CURVE('',#15750,(#15754,#15761),.PCURVE_S1.);+#15750 = LINE('',#15751,#15752);+#15751 = CARTESIAN_POINT('',(5.255,-1.61,0.));+#15752 = VECTOR('',#15753,1.);+#15753 = DIRECTION('',(0.,1.,0.));+#15754 = PCURVE('',#15086,#15755);+#15755 = DEFINITIONAL_REPRESENTATION('',(#15756),#15760);+#15756 = LINE('',#15757,#15758);+#15757 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#15758 = VECTOR('',#15759,1.);+#15759 = DIRECTION('',(0.,1.));+#15760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15761 = PCURVE('',#15058,#15762);+#15762 = DEFINITIONAL_REPRESENTATION('',(#15763),#15767);+#15763 = LINE('',#15764,#15765);+#15764 = CARTESIAN_POINT('',(0.5,-0.34));+#15765 = VECTOR('',#15766,1.);+#15766 = DIRECTION('',(0.,-1.));+#15767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15768 = ORIENTED_EDGE('',*,*,#15070,.F.);+#15769 = ADVANCED_FACE('',(#15770),#15058,.T.);+#15770 = FACE_BOUND('',#15771,.T.);+#15771 = EDGE_LOOP('',(#15772,#15793,#15794,#15795));+#15772 = ORIENTED_EDGE('',*,*,#15773,.F.);+#15773 = EDGE_CURVE('',#15392,#15015,#15774,.T.);+#15774 = SURFACE_CURVE('',#15775,(#15779,#15786),.PCURVE_S1.);+#15775 = LINE('',#15776,#15777);+#15776 = CARTESIAN_POINT('',(5.255,-1.61,0.2));+#15777 = VECTOR('',#15778,1.);+#15778 = DIRECTION('',(0.,1.,0.));+#15779 = PCURVE('',#15058,#15780);+#15780 = DEFINITIONAL_REPRESENTATION('',(#15781),#15785);+#15781 = LINE('',#15782,#15783);+#15782 = CARTESIAN_POINT('',(0.7,-0.34));+#15783 = VECTOR('',#15784,1.);+#15784 = DIRECTION('',(0.,-1.));+#15785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15786 = PCURVE('',#15030,#15787);+#15787 = DEFINITIONAL_REPRESENTATION('',(#15788),#15792);+#15788 = LINE('',#15789,#15790);+#15789 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#15790 = VECTOR('',#15791,1.);+#15791 = DIRECTION('',(0.,1.));+#15792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15793 = ORIENTED_EDGE('',*,*,#15414,.T.);+#15794 = ORIENTED_EDGE('',*,*,#15748,.T.);+#15795 = ORIENTED_EDGE('',*,*,#15042,.F.);+#15796 = ADVANCED_FACE('',(#15797),#15030,.T.);+#15797 = FACE_BOUND('',#15798,.T.);+#15798 = EDGE_LOOP('',(#15799,#15820,#15821,#15822));+#15799 = ORIENTED_EDGE('',*,*,#15800,.T.);+#15800 = EDGE_CURVE('',#14986,#15368,#15801,.T.);+#15801 = SURFACE_CURVE('',#15802,(#15806,#15813),.PCURVE_S1.);+#15802 = LINE('',#15803,#15804);+#15803 = CARTESIAN_POINT('',(4.606430027578,-1.09,0.2));+#15804 = VECTOR('',#15805,1.);+#15805 = DIRECTION('',(0.,-1.,0.));+#15806 = PCURVE('',#15030,#15807);+#15807 = DEFINITIONAL_REPRESENTATION('',(#15808),#15812);+#15808 = LINE('',#15809,#15810);+#15809 = CARTESIAN_POINT('',(0.,0.18));+#15810 = VECTOR('',#15811,1.);+#15811 = DIRECTION('',(0.,-1.));+#15812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15813 = PCURVE('',#15002,#15814);+#15814 = DEFINITIONAL_REPRESENTATION('',(#15815),#15819);+#15815 = LINE('',#15816,#15817);+#15816 = CARTESIAN_POINT('',(3.14159265359,0.18));+#15817 = VECTOR('',#15818,1.);+#15818 = DIRECTION('',(0.,-1.));+#15819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15820 = ORIENTED_EDGE('',*,*,#15391,.T.);+#15821 = ORIENTED_EDGE('',*,*,#15773,.T.);+#15822 = ORIENTED_EDGE('',*,*,#15014,.F.);+#15823 = ADVANCED_FACE('',(#15824),#15002,.F.);+#15824 = FACE_BOUND('',#15825,.F.);+#15825 = EDGE_LOOP('',(#15826,#15827,#15848,#15849));+#15826 = ORIENTED_EDGE('',*,*,#15367,.T.);+#15827 = ORIENTED_EDGE('',*,*,#15828,.F.);+#15828 = EDGE_CURVE('',#14958,#15345,#15829,.T.);+#15829 = SURFACE_CURVE('',#15830,(#15834,#15841),.PCURVE_S1.);+#15830 = LINE('',#15831,#15832);+#15831 = CARTESIAN_POINT('',(4.537145669057,-1.09,0.240004029399));+#15832 = VECTOR('',#15833,1.);+#15833 = DIRECTION('',(0.,-1.,0.));+#15834 = PCURVE('',#15002,#15835);+#15835 = DEFINITIONAL_REPRESENTATION('',(#15836),#15840);+#15836 = LINE('',#15837,#15838);+#15837 = CARTESIAN_POINT('',(4.188848363177,0.18));+#15838 = VECTOR('',#15839,1.);+#15839 = DIRECTION('',(0.,-1.));+#15840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15841 = PCURVE('',#14973,#15842);+#15842 = DEFINITIONAL_REPRESENTATION('',(#15843),#15847);+#15843 = LINE('',#15844,#15845);+#15844 = CARTESIAN_POINT('',(1.062267891155,0.18));+#15845 = VECTOR('',#15846,1.);+#15846 = DIRECTION('',(0.,-1.));+#15847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15848 = ORIENTED_EDGE('',*,*,#14985,.F.);+#15849 = ORIENTED_EDGE('',*,*,#15800,.T.);+#15850 = ADVANCED_FACE('',(#15851),#14973,.T.);+#15851 = FACE_BOUND('',#15852,.T.);+#15852 = EDGE_LOOP('',(#15853,#15854,#15855,#15856));+#15853 = ORIENTED_EDGE('',*,*,#15586,.F.);+#15854 = ORIENTED_EDGE('',*,*,#15344,.T.);+#15855 = ORIENTED_EDGE('',*,*,#15828,.F.);+#15856 = ORIENTED_EDGE('',*,*,#14957,.F.);+#15857 = MANIFOLD_SOLID_BREP('',#15858);+#15858 = CLOSED_SHELL('',(#15859,#15989,#16065,#16403,#16452,#16718,+ #16745,#16772,#16799,#16826,#16853,#16880,#16907,#16934,#16961,+ #16988));+#15859 = ADVANCED_FACE('',(#15860),#15875,.T.);+#15860 = FACE_BOUND('',#15861,.T.);+#15861 = EDGE_LOOP('',(#15862,#15902,#15930,#15963));+#15862 = ORIENTED_EDGE('',*,*,#15863,.T.);+#15863 = EDGE_CURVE('',#15864,#15866,#15868,.T.);+#15864 = VERTEX_POINT('',#15865);+#15865 = CARTESIAN_POINT('',(3.4975,0.18,1.3));+#15866 = VERTEX_POINT('',#15867);+#15867 = CARTESIAN_POINT('',(3.4475,0.18,1.286602540378));+#15868 = SURFACE_CURVE('',#15869,(#15874,#15886),.PCURVE_S1.);+#15869 = CIRCLE('',#15870,0.1);+#15870 = AXIS2_PLACEMENT_3D('',#15871,#15872,#15873);+#15871 = CARTESIAN_POINT('',(3.4975,0.18,1.2));+#15872 = DIRECTION('',(0.,-1.,0.));+#15873 = DIRECTION('',(1.,0.,0.));+#15874 = PCURVE('',#15875,#15880);+#15875 = CYLINDRICAL_SURFACE('',#15876,0.1);+#15876 = AXIS2_PLACEMENT_3D('',#15877,#15878,#15879);+#15877 = CARTESIAN_POINT('',(3.4975,0.,1.2));+#15878 = DIRECTION('',(0.,1.,0.));+#15879 = DIRECTION('',(1.,0.,0.));+#15880 = DEFINITIONAL_REPRESENTATION('',(#15881),#15885);+#15881 = LINE('',#15882,#15883);+#15882 = CARTESIAN_POINT('',(6.28318530718,0.18));+#15883 = VECTOR('',#15884,1.);+#15884 = DIRECTION('',(-1.,-0.));+#15885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15886 = PCURVE('',#15887,#15892);+#15887 = PLANE('',#15888);+#15888 = AXIS2_PLACEMENT_3D('',#15889,#15890,#15891);+#15889 = CARTESIAN_POINT('',(4.408401242914,0.18,0.524461625949));+#15890 = DIRECTION('',(0.,1.,0.));+#15891 = DIRECTION('',(0.,0.,1.));+#15892 = DEFINITIONAL_REPRESENTATION('',(#15893),#15901);+#15893 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15894,#15895,#15896,#15897+ ,#15898,#15899,#15900),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15894 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15895 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#15896 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#15897 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#15898 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#15899 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#15900 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15902 = ORIENTED_EDGE('',*,*,#15903,.F.);+#15903 = EDGE_CURVE('',#15904,#15866,#15906,.T.);+#15904 = VERTEX_POINT('',#15905);+#15905 = CARTESIAN_POINT('',(3.4475,-0.18,1.286602540378));+#15906 = SURFACE_CURVE('',#15907,(#15911,#15918),.PCURVE_S1.);+#15907 = LINE('',#15908,#15909);+#15908 = CARTESIAN_POINT('',(3.4475,0.,1.286602540378));+#15909 = VECTOR('',#15910,1.);+#15910 = DIRECTION('',(0.,1.,0.));+#15911 = PCURVE('',#15875,#15912);+#15912 = DEFINITIONAL_REPRESENTATION('',(#15913),#15917);+#15913 = LINE('',#15914,#15915);+#15914 = CARTESIAN_POINT('',(4.188790204787,0.));+#15915 = VECTOR('',#15916,1.);+#15916 = DIRECTION('',(-0.,1.));+#15917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15918 = PCURVE('',#15919,#15924);+#15919 = PLANE('',#15920);+#15920 = AXIS2_PLACEMENT_3D('',#15921,#15922,#15923);+#15921 = CARTESIAN_POINT('',(3.4475,-0.68,-0.5));+#15922 = DIRECTION('',(1.,0.,0.));+#15923 = DIRECTION('',(0.,0.,1.));+#15924 = DEFINITIONAL_REPRESENTATION('',(#15925),#15929);+#15925 = LINE('',#15926,#15927);+#15926 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#15927 = VECTOR('',#15928,1.);+#15928 = DIRECTION('',(0.,-1.));+#15929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15930 = ORIENTED_EDGE('',*,*,#15931,.F.);+#15931 = EDGE_CURVE('',#15932,#15904,#15934,.T.);+#15932 = VERTEX_POINT('',#15933);+#15933 = CARTESIAN_POINT('',(3.4975,-0.18,1.3));+#15934 = SURFACE_CURVE('',#15935,(#15940,#15947),.PCURVE_S1.);+#15935 = CIRCLE('',#15936,0.1);+#15936 = AXIS2_PLACEMENT_3D('',#15937,#15938,#15939);+#15937 = CARTESIAN_POINT('',(3.4975,-0.18,1.2));+#15938 = DIRECTION('',(0.,-1.,0.));+#15939 = DIRECTION('',(1.,0.,0.));+#15940 = PCURVE('',#15875,#15941);+#15941 = DEFINITIONAL_REPRESENTATION('',(#15942),#15946);+#15942 = LINE('',#15943,#15944);+#15943 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#15944 = VECTOR('',#15945,1.);+#15945 = DIRECTION('',(-1.,0.));+#15946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15947 = PCURVE('',#15948,#15953);+#15948 = PLANE('',#15949);+#15949 = AXIS2_PLACEMENT_3D('',#15950,#15951,#15952);+#15950 = CARTESIAN_POINT('',(4.408401242914,-0.18,0.524461625949));+#15951 = DIRECTION('',(0.,1.,0.));+#15952 = DIRECTION('',(0.,0.,1.));+#15953 = DEFINITIONAL_REPRESENTATION('',(#15954),#15962);+#15954 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15955,#15956,#15957,#15958+ ,#15959,#15960,#15961),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15955 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15956 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#15957 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#15958 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#15959 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#15960 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#15961 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#15962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15963 = ORIENTED_EDGE('',*,*,#15964,.T.);+#15964 = EDGE_CURVE('',#15932,#15864,#15965,.T.);+#15965 = SURFACE_CURVE('',#15966,(#15970,#15977),.PCURVE_S1.);+#15966 = LINE('',#15967,#15968);+#15967 = CARTESIAN_POINT('',(3.4975,-0.18,1.3));+#15968 = VECTOR('',#15969,1.);+#15969 = DIRECTION('',(0.,1.,0.));+#15970 = PCURVE('',#15875,#15971);+#15971 = DEFINITIONAL_REPRESENTATION('',(#15972),#15976);+#15972 = LINE('',#15973,#15974);+#15973 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#15974 = VECTOR('',#15975,1.);+#15975 = DIRECTION('',(0.,1.));+#15976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15977 = PCURVE('',#15978,#15983);+#15978 = PLANE('',#15979);+#15979 = AXIS2_PLACEMENT_3D('',#15980,#15981,#15982);+#15980 = CARTESIAN_POINT('',(3.4975,0.,1.3));+#15981 = DIRECTION('',(0.,0.,1.));+#15982 = DIRECTION('',(1.,0.,0.));+#15983 = DEFINITIONAL_REPRESENTATION('',(#15984),#15988);+#15984 = LINE('',#15985,#15986);+#15985 = CARTESIAN_POINT('',(0.,-0.18));+#15986 = VECTOR('',#15987,1.);+#15987 = DIRECTION('',(0.,1.));+#15988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15989 = ADVANCED_FACE('',(#15990),#15978,.T.);+#15990 = FACE_BOUND('',#15991,.T.);+#15991 = EDGE_LOOP('',(#15992,#15993,#16016,#16044));+#15992 = ORIENTED_EDGE('',*,*,#15964,.F.);+#15993 = ORIENTED_EDGE('',*,*,#15994,.T.);+#15994 = EDGE_CURVE('',#15932,#15995,#15997,.T.);+#15995 = VERTEX_POINT('',#15996);+#15996 = CARTESIAN_POINT('',(3.763569972422,-0.18,1.3));+#15997 = SURFACE_CURVE('',#15998,(#16002,#16009),.PCURVE_S1.);+#15998 = LINE('',#15999,#16000);+#15999 = CARTESIAN_POINT('',(3.4975,-0.18,1.3));+#16000 = VECTOR('',#16001,1.);+#16001 = DIRECTION('',(1.,0.,0.));+#16002 = PCURVE('',#15978,#16003);+#16003 = DEFINITIONAL_REPRESENTATION('',(#16004),#16008);+#16004 = LINE('',#16005,#16006);+#16005 = CARTESIAN_POINT('',(0.,-0.18));+#16006 = VECTOR('',#16007,1.);+#16007 = DIRECTION('',(1.,0.));+#16008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16009 = PCURVE('',#15948,#16010);+#16010 = DEFINITIONAL_REPRESENTATION('',(#16011),#16015);+#16011 = LINE('',#16012,#16013);+#16012 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#16013 = VECTOR('',#16014,1.);+#16014 = DIRECTION('',(0.,1.));+#16015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16016 = ORIENTED_EDGE('',*,*,#16017,.T.);+#16017 = EDGE_CURVE('',#15995,#16018,#16020,.T.);+#16018 = VERTEX_POINT('',#16019);+#16019 = CARTESIAN_POINT('',(3.763569972422,0.18,1.3));+#16020 = SURFACE_CURVE('',#16021,(#16025,#16032),.PCURVE_S1.);+#16021 = LINE('',#16022,#16023);+#16022 = CARTESIAN_POINT('',(3.763569972422,-0.18,1.3));+#16023 = VECTOR('',#16024,1.);+#16024 = DIRECTION('',(0.,1.,0.));+#16025 = PCURVE('',#15978,#16026);+#16026 = DEFINITIONAL_REPRESENTATION('',(#16027),#16031);+#16027 = LINE('',#16028,#16029);+#16028 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#16029 = VECTOR('',#16030,1.);+#16030 = DIRECTION('',(0.,1.));+#16031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16032 = PCURVE('',#16033,#16038);+#16033 = CYLINDRICAL_SURFACE('',#16034,0.28);+#16034 = AXIS2_PLACEMENT_3D('',#16035,#16036,#16037);+#16035 = CARTESIAN_POINT('',(3.763569972422,0.,1.02));+#16036 = DIRECTION('',(0.,1.,0.));+#16037 = DIRECTION('',(0.,0.,1.));+#16038 = DEFINITIONAL_REPRESENTATION('',(#16039),#16043);+#16039 = LINE('',#16040,#16041);+#16040 = CARTESIAN_POINT('',(0.,-0.18));+#16041 = VECTOR('',#16042,1.);+#16042 = DIRECTION('',(-0.,1.));+#16043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16044 = ORIENTED_EDGE('',*,*,#16045,.F.);+#16045 = EDGE_CURVE('',#15864,#16018,#16046,.T.);+#16046 = SURFACE_CURVE('',#16047,(#16051,#16058),.PCURVE_S1.);+#16047 = LINE('',#16048,#16049);+#16048 = CARTESIAN_POINT('',(3.4975,0.18,1.3));+#16049 = VECTOR('',#16050,1.);+#16050 = DIRECTION('',(1.,0.,0.));+#16051 = PCURVE('',#15978,#16052);+#16052 = DEFINITIONAL_REPRESENTATION('',(#16053),#16057);+#16053 = LINE('',#16054,#16055);+#16054 = CARTESIAN_POINT('',(0.,0.18));+#16055 = VECTOR('',#16056,1.);+#16056 = DIRECTION('',(1.,0.));+#16057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16058 = PCURVE('',#15887,#16059);+#16059 = DEFINITIONAL_REPRESENTATION('',(#16060),#16064);+#16060 = LINE('',#16061,#16062);+#16061 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#16062 = VECTOR('',#16063,1.);+#16063 = DIRECTION('',(0.,1.));+#16064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16065 = ADVANCED_FACE('',(#16066),#15887,.T.);+#16066 = FACE_BOUND('',#16067,.T.);+#16067 = EDGE_LOOP('',(#16068,#16069,#16070,#16094,#16122,#16151,#16179,+ #16207,#16235,#16264,#16292,#16321,#16349,#16382));+#16068 = ORIENTED_EDGE('',*,*,#15863,.F.);+#16069 = ORIENTED_EDGE('',*,*,#16045,.T.);+#16070 = ORIENTED_EDGE('',*,*,#16071,.T.);+#16071 = EDGE_CURVE('',#16018,#16072,#16074,.T.);+#16072 = VERTEX_POINT('',#16073);+#16073 = CARTESIAN_POINT('',(4.006065227246,0.18,1.159985897103));+#16074 = SURFACE_CURVE('',#16075,(#16080,#16087),.PCURVE_S1.);+#16075 = CIRCLE('',#16076,0.28);+#16076 = AXIS2_PLACEMENT_3D('',#16077,#16078,#16079);+#16077 = CARTESIAN_POINT('',(3.763569972422,0.18,1.02));+#16078 = DIRECTION('',(0.,1.,0.));+#16079 = DIRECTION('',(0.,0.,1.));+#16080 = PCURVE('',#15887,#16081);+#16081 = DEFINITIONAL_REPRESENTATION('',(#16082),#16086);+#16082 = CIRCLE('',#16083,0.28);+#16083 = AXIS2_PLACEMENT_2D('',#16084,#16085);+#16084 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#16085 = DIRECTION('',(1.,0.));+#16086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16087 = PCURVE('',#16033,#16088);+#16088 = DEFINITIONAL_REPRESENTATION('',(#16089),#16093);+#16089 = LINE('',#16090,#16091);+#16090 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#16091 = VECTOR('',#16092,1.);+#16092 = DIRECTION('',(1.,-0.));+#16093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16094 = ORIENTED_EDGE('',*,*,#16095,.T.);+#16095 = EDGE_CURVE('',#16072,#16096,#16098,.T.);+#16096 = VERTEX_POINT('',#16097);+#16097 = CARTESIAN_POINT('',(4.537145669057,0.18,0.240004029399));+#16098 = SURFACE_CURVE('',#16099,(#16103,#16110),.PCURVE_S1.);+#16099 = LINE('',#16100,#16101);+#16100 = CARTESIAN_POINT('',(3.954105448151,0.18,1.249994963251));+#16101 = VECTOR('',#16102,1.);+#16102 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16103 = PCURVE('',#15887,#16104);+#16104 = DEFINITIONAL_REPRESENTATION('',(#16105),#16109);+#16105 = LINE('',#16106,#16107);+#16106 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#16107 = VECTOR('',#16108,1.);+#16108 = DIRECTION('',(-0.866054481515,0.499949632511));+#16109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16110 = PCURVE('',#16111,#16116);+#16111 = PLANE('',#16112);+#16112 = AXIS2_PLACEMENT_3D('',#16113,#16114,#16115);+#16113 = CARTESIAN_POINT('',(4.006065227246,0.,1.159985897103));+#16114 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#16115 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16116 = DEFINITIONAL_REPRESENTATION('',(#16117),#16121);+#16117 = LINE('',#16118,#16119);+#16118 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#16119 = VECTOR('',#16120,1.);+#16120 = DIRECTION('',(1.,0.));+#16121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16122 = ORIENTED_EDGE('',*,*,#16123,.F.);+#16123 = EDGE_CURVE('',#16124,#16096,#16126,.T.);+#16124 = VERTEX_POINT('',#16125);+#16125 = CARTESIAN_POINT('',(4.606430027578,0.18,0.2));+#16126 = SURFACE_CURVE('',#16127,(#16132,#16139),.PCURVE_S1.);+#16127 = CIRCLE('',#16128,8.E-02);+#16128 = AXIS2_PLACEMENT_3D('',#16129,#16130,#16131);+#16129 = CARTESIAN_POINT('',(4.606430027578,0.18,0.28));+#16130 = DIRECTION('',(0.,1.,0.));+#16131 = DIRECTION('',(0.,0.,1.));+#16132 = PCURVE('',#15887,#16133);+#16133 = DEFINITIONAL_REPRESENTATION('',(#16134),#16138);+#16134 = CIRCLE('',#16135,8.E-02);+#16135 = AXIS2_PLACEMENT_2D('',#16136,#16137);+#16136 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#16137 = DIRECTION('',(1.,0.));+#16138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16139 = PCURVE('',#16140,#16145);+#16140 = CYLINDRICAL_SURFACE('',#16141,8.E-02);+#16141 = AXIS2_PLACEMENT_3D('',#16142,#16143,#16144);+#16142 = CARTESIAN_POINT('',(4.606430027578,0.,0.28));+#16143 = DIRECTION('',(0.,1.,0.));+#16144 = DIRECTION('',(0.,0.,1.));+#16145 = DEFINITIONAL_REPRESENTATION('',(#16146),#16150);+#16146 = LINE('',#16147,#16148);+#16147 = CARTESIAN_POINT('',(-0.,0.18));+#16148 = VECTOR('',#16149,1.);+#16149 = DIRECTION('',(1.,-0.));+#16150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16151 = ORIENTED_EDGE('',*,*,#16152,.T.);+#16152 = EDGE_CURVE('',#16124,#16153,#16155,.T.);+#16153 = VERTEX_POINT('',#16154);+#16154 = CARTESIAN_POINT('',(5.255,0.18,0.2));+#16155 = SURFACE_CURVE('',#16156,(#16160,#16167),.PCURVE_S1.);+#16156 = LINE('',#16157,#16158);+#16157 = CARTESIAN_POINT('',(4.5025,0.18,0.2));+#16158 = VECTOR('',#16159,1.);+#16159 = DIRECTION('',(1.,0.,0.));+#16160 = PCURVE('',#15887,#16161);+#16161 = DEFINITIONAL_REPRESENTATION('',(#16162),#16166);+#16162 = LINE('',#16163,#16164);+#16163 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#16164 = VECTOR('',#16165,1.);+#16165 = DIRECTION('',(0.,1.));+#16166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16167 = PCURVE('',#16168,#16173);+#16168 = PLANE('',#16169);+#16169 = AXIS2_PLACEMENT_3D('',#16170,#16171,#16172);+#16170 = CARTESIAN_POINT('',(4.606430027578,0.,0.2));+#16171 = DIRECTION('',(0.,0.,1.));+#16172 = DIRECTION('',(1.,0.,0.));+#16173 = DEFINITIONAL_REPRESENTATION('',(#16174),#16178);+#16174 = LINE('',#16175,#16176);+#16175 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#16176 = VECTOR('',#16177,1.);+#16177 = DIRECTION('',(1.,0.));+#16178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16179 = ORIENTED_EDGE('',*,*,#16180,.T.);+#16180 = EDGE_CURVE('',#16153,#16181,#16183,.T.);+#16181 = VERTEX_POINT('',#16182);+#16182 = CARTESIAN_POINT('',(5.255,0.18,0.));+#16183 = SURFACE_CURVE('',#16184,(#16188,#16195),.PCURVE_S1.);+#16184 = LINE('',#16185,#16186);+#16185 = CARTESIAN_POINT('',(5.255,0.18,1.223081297441E-02));+#16186 = VECTOR('',#16187,1.);+#16187 = DIRECTION('',(0.,0.,-1.));+#16188 = PCURVE('',#15887,#16189);+#16189 = DEFINITIONAL_REPRESENTATION('',(#16190),#16194);+#16190 = LINE('',#16191,#16192);+#16191 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#16192 = VECTOR('',#16193,1.);+#16193 = DIRECTION('',(-1.,0.));+#16194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16195 = PCURVE('',#16196,#16201);+#16196 = PLANE('',#16197);+#16197 = AXIS2_PLACEMENT_3D('',#16198,#16199,#16200);+#16198 = CARTESIAN_POINT('',(5.255,-0.68,-0.5));+#16199 = DIRECTION('',(1.,0.,0.));+#16200 = DIRECTION('',(0.,0.,1.));+#16201 = DEFINITIONAL_REPRESENTATION('',(#16202),#16206);+#16202 = LINE('',#16203,#16204);+#16203 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#16204 = VECTOR('',#16205,1.);+#16205 = DIRECTION('',(-1.,0.));+#16206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16207 = ORIENTED_EDGE('',*,*,#16208,.F.);+#16208 = EDGE_CURVE('',#16209,#16181,#16211,.T.);+#16209 = VERTEX_POINT('',#16210);+#16210 = CARTESIAN_POINT('',(4.606430027578,0.18,-5.551115123126E-17));+#16211 = SURFACE_CURVE('',#16212,(#16216,#16223),.PCURVE_S1.);+#16212 = LINE('',#16213,#16214);+#16213 = CARTESIAN_POINT('',(4.5025,0.18,0.));+#16214 = VECTOR('',#16215,1.);+#16215 = DIRECTION('',(1.,0.,0.));+#16216 = PCURVE('',#15887,#16217);+#16217 = DEFINITIONAL_REPRESENTATION('',(#16218),#16222);+#16218 = LINE('',#16219,#16220);+#16219 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#16220 = VECTOR('',#16221,1.);+#16221 = DIRECTION('',(0.,1.));+#16222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16223 = PCURVE('',#16224,#16229);+#16224 = PLANE('',#16225);+#16225 = AXIS2_PLACEMENT_3D('',#16226,#16227,#16228);+#16226 = CARTESIAN_POINT('',(4.606430027578,0.,0.));+#16227 = DIRECTION('',(0.,0.,1.));+#16228 = DIRECTION('',(1.,0.,0.));+#16229 = DEFINITIONAL_REPRESENTATION('',(#16230),#16234);+#16230 = LINE('',#16231,#16232);+#16231 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#16232 = VECTOR('',#16233,1.);+#16233 = DIRECTION('',(1.,0.));+#16234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16235 = ORIENTED_EDGE('',*,*,#16236,.T.);+#16236 = EDGE_CURVE('',#16209,#16237,#16239,.T.);+#16237 = VERTEX_POINT('',#16238);+#16238 = CARTESIAN_POINT('',(4.363934772754,0.18,0.140014102897));+#16239 = SURFACE_CURVE('',#16240,(#16245,#16252),.PCURVE_S1.);+#16240 = CIRCLE('',#16241,0.28);+#16241 = AXIS2_PLACEMENT_3D('',#16242,#16243,#16244);+#16242 = CARTESIAN_POINT('',(4.606430027578,0.18,0.28));+#16243 = DIRECTION('',(0.,1.,0.));+#16244 = DIRECTION('',(0.,0.,1.));+#16245 = PCURVE('',#15887,#16246);+#16246 = DEFINITIONAL_REPRESENTATION('',(#16247),#16251);+#16247 = CIRCLE('',#16248,0.28);+#16248 = AXIS2_PLACEMENT_2D('',#16249,#16250);+#16249 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#16250 = DIRECTION('',(1.,0.));+#16251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16252 = PCURVE('',#16253,#16258);+#16253 = CYLINDRICAL_SURFACE('',#16254,0.28);+#16254 = AXIS2_PLACEMENT_3D('',#16255,#16256,#16257);+#16255 = CARTESIAN_POINT('',(4.606430027578,0.,0.28));+#16256 = DIRECTION('',(0.,1.,0.));+#16257 = DIRECTION('',(0.,0.,1.));+#16258 = DEFINITIONAL_REPRESENTATION('',(#16259),#16263);+#16259 = LINE('',#16260,#16261);+#16260 = CARTESIAN_POINT('',(-0.,0.18));+#16261 = VECTOR('',#16262,1.);+#16262 = DIRECTION('',(1.,-0.));+#16263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16264 = ORIENTED_EDGE('',*,*,#16265,.F.);+#16265 = EDGE_CURVE('',#16266,#16237,#16268,.T.);+#16266 = VERTEX_POINT('',#16267);+#16267 = CARTESIAN_POINT('',(3.832854330943,0.18,1.059995970601));+#16268 = SURFACE_CURVE('',#16269,(#16273,#16280),.PCURVE_S1.);+#16269 = LINE('',#16270,#16271);+#16270 = CARTESIAN_POINT('',(3.780894551849,0.18,1.150005036749));+#16271 = VECTOR('',#16272,1.);+#16272 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16273 = PCURVE('',#15887,#16274);+#16274 = DEFINITIONAL_REPRESENTATION('',(#16275),#16279);+#16275 = LINE('',#16276,#16277);+#16276 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#16277 = VECTOR('',#16278,1.);+#16278 = DIRECTION('',(-0.866054481515,0.499949632511));+#16279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16280 = PCURVE('',#16281,#16286);+#16281 = PLANE('',#16282);+#16282 = AXIS2_PLACEMENT_3D('',#16283,#16284,#16285);+#16283 = CARTESIAN_POINT('',(3.832854330943,0.,1.059995970601));+#16284 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#16285 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16286 = DEFINITIONAL_REPRESENTATION('',(#16287),#16291);+#16287 = LINE('',#16288,#16289);+#16288 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#16289 = VECTOR('',#16290,1.);+#16290 = DIRECTION('',(1.,0.));+#16291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16292 = ORIENTED_EDGE('',*,*,#16293,.F.);+#16293 = EDGE_CURVE('',#16294,#16266,#16296,.T.);+#16294 = VERTEX_POINT('',#16295);+#16295 = CARTESIAN_POINT('',(3.763569972422,0.18,1.1));+#16296 = SURFACE_CURVE('',#16297,(#16302,#16309),.PCURVE_S1.);+#16297 = CIRCLE('',#16298,8.E-02);+#16298 = AXIS2_PLACEMENT_3D('',#16299,#16300,#16301);+#16299 = CARTESIAN_POINT('',(3.763569972422,0.18,1.02));+#16300 = DIRECTION('',(0.,1.,0.));+#16301 = DIRECTION('',(0.,0.,1.));+#16302 = PCURVE('',#15887,#16303);+#16303 = DEFINITIONAL_REPRESENTATION('',(#16304),#16308);+#16304 = CIRCLE('',#16305,8.E-02);+#16305 = AXIS2_PLACEMENT_2D('',#16306,#16307);+#16306 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#16307 = DIRECTION('',(1.,0.));+#16308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16309 = PCURVE('',#16310,#16315);+#16310 = CYLINDRICAL_SURFACE('',#16311,8.E-02);+#16311 = AXIS2_PLACEMENT_3D('',#16312,#16313,#16314);+#16312 = CARTESIAN_POINT('',(3.763569972422,0.,1.02));+#16313 = DIRECTION('',(0.,1.,0.));+#16314 = DIRECTION('',(0.,0.,1.));+#16315 = DEFINITIONAL_REPRESENTATION('',(#16316),#16320);+#16316 = LINE('',#16317,#16318);+#16317 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#16318 = VECTOR('',#16319,1.);+#16319 = DIRECTION('',(1.,-0.));+#16320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16321 = ORIENTED_EDGE('',*,*,#16322,.F.);+#16322 = EDGE_CURVE('',#16323,#16294,#16325,.T.);+#16323 = VERTEX_POINT('',#16324);+#16324 = CARTESIAN_POINT('',(3.4975,0.18,1.1));+#16325 = SURFACE_CURVE('',#16326,(#16330,#16337),.PCURVE_S1.);+#16326 = LINE('',#16327,#16328);+#16327 = CARTESIAN_POINT('',(3.4975,0.18,1.1));+#16328 = VECTOR('',#16329,1.);+#16329 = DIRECTION('',(1.,0.,0.));+#16330 = PCURVE('',#15887,#16331);+#16331 = DEFINITIONAL_REPRESENTATION('',(#16332),#16336);+#16332 = LINE('',#16333,#16334);+#16333 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#16334 = VECTOR('',#16335,1.);+#16335 = DIRECTION('',(0.,1.));+#16336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16337 = PCURVE('',#16338,#16343);+#16338 = PLANE('',#16339);+#16339 = AXIS2_PLACEMENT_3D('',#16340,#16341,#16342);+#16340 = CARTESIAN_POINT('',(3.4975,0.,1.1));+#16341 = DIRECTION('',(0.,0.,1.));+#16342 = DIRECTION('',(1.,0.,0.));+#16343 = DEFINITIONAL_REPRESENTATION('',(#16344),#16348);+#16344 = LINE('',#16345,#16346);+#16345 = CARTESIAN_POINT('',(0.,0.18));+#16346 = VECTOR('',#16347,1.);+#16347 = DIRECTION('',(1.,0.));+#16348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16349 = ORIENTED_EDGE('',*,*,#16350,.F.);+#16350 = EDGE_CURVE('',#16351,#16323,#16353,.T.);+#16351 = VERTEX_POINT('',#16352);+#16352 = CARTESIAN_POINT('',(3.4475,0.18,1.113397459622));+#16353 = SURFACE_CURVE('',#16354,(#16359,#16370),.PCURVE_S1.);+#16354 = CIRCLE('',#16355,0.1);+#16355 = AXIS2_PLACEMENT_3D('',#16356,#16357,#16358);+#16356 = CARTESIAN_POINT('',(3.4975,0.18,1.2));+#16357 = DIRECTION('',(0.,-1.,0.));+#16358 = DIRECTION('',(1.,0.,0.));+#16359 = PCURVE('',#15887,#16360);+#16360 = DEFINITIONAL_REPRESENTATION('',(#16361),#16369);+#16361 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16362,#16363,#16364,#16365+ ,#16366,#16367,#16368),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16362 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#16363 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#16364 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#16365 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#16366 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#16367 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#16368 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#16369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16370 = PCURVE('',#16371,#16376);+#16371 = CYLINDRICAL_SURFACE('',#16372,0.1);+#16372 = AXIS2_PLACEMENT_3D('',#16373,#16374,#16375);+#16373 = CARTESIAN_POINT('',(3.4975,0.,1.2));+#16374 = DIRECTION('',(0.,1.,0.));+#16375 = DIRECTION('',(1.,0.,0.));+#16376 = DEFINITIONAL_REPRESENTATION('',(#16377),#16381);+#16377 = LINE('',#16378,#16379);+#16378 = CARTESIAN_POINT('',(6.28318530718,0.18));+#16379 = VECTOR('',#16380,1.);+#16380 = DIRECTION('',(-1.,-0.));+#16381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16382 = ORIENTED_EDGE('',*,*,#16383,.F.);+#16383 = EDGE_CURVE('',#15866,#16351,#16384,.T.);+#16384 = SURFACE_CURVE('',#16385,(#16389,#16396),.PCURVE_S1.);+#16385 = LINE('',#16386,#16387);+#16386 = CARTESIAN_POINT('',(3.4475,0.18,1.223081297441E-02));+#16387 = VECTOR('',#16388,1.);+#16388 = DIRECTION('',(0.,0.,-1.));+#16389 = PCURVE('',#15887,#16390);+#16390 = DEFINITIONAL_REPRESENTATION('',(#16391),#16395);+#16391 = LINE('',#16392,#16393);+#16392 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#16393 = VECTOR('',#16394,1.);+#16394 = DIRECTION('',(-1.,0.));+#16395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16396 = PCURVE('',#15919,#16397);+#16397 = DEFINITIONAL_REPRESENTATION('',(#16398),#16402);+#16398 = LINE('',#16399,#16400);+#16399 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#16400 = VECTOR('',#16401,1.);+#16401 = DIRECTION('',(-1.,0.));+#16402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16403 = ADVANCED_FACE('',(#16404),#15919,.F.);+#16404 = FACE_BOUND('',#16405,.F.);+#16405 = EDGE_LOOP('',(#16406,#16407,#16430,#16451));+#16406 = ORIENTED_EDGE('',*,*,#15903,.F.);+#16407 = ORIENTED_EDGE('',*,*,#16408,.T.);+#16408 = EDGE_CURVE('',#15904,#16409,#16411,.T.);+#16409 = VERTEX_POINT('',#16410);+#16410 = CARTESIAN_POINT('',(3.4475,-0.18,1.113397459622));+#16411 = SURFACE_CURVE('',#16412,(#16416,#16423),.PCURVE_S1.);+#16412 = LINE('',#16413,#16414);+#16413 = CARTESIAN_POINT('',(3.4475,-0.18,1.223081297441E-02));+#16414 = VECTOR('',#16415,1.);+#16415 = DIRECTION('',(0.,0.,-1.));+#16416 = PCURVE('',#15919,#16417);+#16417 = DEFINITIONAL_REPRESENTATION('',(#16418),#16422);+#16418 = LINE('',#16419,#16420);+#16419 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#16420 = VECTOR('',#16421,1.);+#16421 = DIRECTION('',(-1.,0.));+#16422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16423 = PCURVE('',#15948,#16424);+#16424 = DEFINITIONAL_REPRESENTATION('',(#16425),#16429);+#16425 = LINE('',#16426,#16427);+#16426 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#16427 = VECTOR('',#16428,1.);+#16428 = DIRECTION('',(-1.,0.));+#16429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16430 = ORIENTED_EDGE('',*,*,#16431,.T.);+#16431 = EDGE_CURVE('',#16409,#16351,#16432,.T.);+#16432 = SURFACE_CURVE('',#16433,(#16437,#16444),.PCURVE_S1.);+#16433 = LINE('',#16434,#16435);+#16434 = CARTESIAN_POINT('',(3.4475,0.,1.113397459622));+#16435 = VECTOR('',#16436,1.);+#16436 = DIRECTION('',(0.,1.,0.));+#16437 = PCURVE('',#15919,#16438);+#16438 = DEFINITIONAL_REPRESENTATION('',(#16439),#16443);+#16439 = LINE('',#16440,#16441);+#16440 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#16441 = VECTOR('',#16442,1.);+#16442 = DIRECTION('',(0.,-1.));+#16443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16444 = PCURVE('',#16371,#16445);+#16445 = DEFINITIONAL_REPRESENTATION('',(#16446),#16450);+#16446 = LINE('',#16447,#16448);+#16447 = CARTESIAN_POINT('',(2.094395102394,0.));+#16448 = VECTOR('',#16449,1.);+#16449 = DIRECTION('',(-0.,1.));+#16450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16451 = ORIENTED_EDGE('',*,*,#16383,.F.);+#16452 = ADVANCED_FACE('',(#16453),#15948,.F.);+#16453 = FACE_BOUND('',#16454,.F.);+#16454 = EDGE_LOOP('',(#16455,#16456,#16457,#16481,#16504,#16528,#16551,+ #16574,#16597,#16621,#16644,#16668,#16691,#16717));+#16455 = ORIENTED_EDGE('',*,*,#15931,.F.);+#16456 = ORIENTED_EDGE('',*,*,#15994,.T.);+#16457 = ORIENTED_EDGE('',*,*,#16458,.T.);+#16458 = EDGE_CURVE('',#15995,#16459,#16461,.T.);+#16459 = VERTEX_POINT('',#16460);+#16460 = CARTESIAN_POINT('',(4.006065227246,-0.18,1.159985897103));+#16461 = SURFACE_CURVE('',#16462,(#16467,#16474),.PCURVE_S1.);+#16462 = CIRCLE('',#16463,0.28);+#16463 = AXIS2_PLACEMENT_3D('',#16464,#16465,#16466);+#16464 = CARTESIAN_POINT('',(3.763569972422,-0.18,1.02));+#16465 = DIRECTION('',(0.,1.,0.));+#16466 = DIRECTION('',(0.,0.,1.));+#16467 = PCURVE('',#15948,#16468);+#16468 = DEFINITIONAL_REPRESENTATION('',(#16469),#16473);+#16469 = CIRCLE('',#16470,0.28);+#16470 = AXIS2_PLACEMENT_2D('',#16471,#16472);+#16471 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#16472 = DIRECTION('',(1.,0.));+#16473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16474 = PCURVE('',#16033,#16475);+#16475 = DEFINITIONAL_REPRESENTATION('',(#16476),#16480);+#16476 = LINE('',#16477,#16478);+#16477 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#16478 = VECTOR('',#16479,1.);+#16479 = DIRECTION('',(1.,0.));+#16480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16481 = ORIENTED_EDGE('',*,*,#16482,.T.);+#16482 = EDGE_CURVE('',#16459,#16483,#16485,.T.);+#16483 = VERTEX_POINT('',#16484);+#16484 = CARTESIAN_POINT('',(4.537145669057,-0.18,0.240004029399));+#16485 = SURFACE_CURVE('',#16486,(#16490,#16497),.PCURVE_S1.);+#16486 = LINE('',#16487,#16488);+#16487 = CARTESIAN_POINT('',(3.954105448151,-0.18,1.249994963251));+#16488 = VECTOR('',#16489,1.);+#16489 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16490 = PCURVE('',#15948,#16491);+#16491 = DEFINITIONAL_REPRESENTATION('',(#16492),#16496);+#16492 = LINE('',#16493,#16494);+#16493 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#16494 = VECTOR('',#16495,1.);+#16495 = DIRECTION('',(-0.866054481515,0.499949632511));+#16496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16497 = PCURVE('',#16111,#16498);+#16498 = DEFINITIONAL_REPRESENTATION('',(#16499),#16503);+#16499 = LINE('',#16500,#16501);+#16500 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#16501 = VECTOR('',#16502,1.);+#16502 = DIRECTION('',(1.,0.));+#16503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16504 = ORIENTED_EDGE('',*,*,#16505,.F.);+#16505 = EDGE_CURVE('',#16506,#16483,#16508,.T.);+#16506 = VERTEX_POINT('',#16507);+#16507 = CARTESIAN_POINT('',(4.606430027578,-0.18,0.2));+#16508 = SURFACE_CURVE('',#16509,(#16514,#16521),.PCURVE_S1.);+#16509 = CIRCLE('',#16510,8.E-02);+#16510 = AXIS2_PLACEMENT_3D('',#16511,#16512,#16513);+#16511 = CARTESIAN_POINT('',(4.606430027578,-0.18,0.28));+#16512 = DIRECTION('',(0.,1.,0.));+#16513 = DIRECTION('',(0.,0.,1.));+#16514 = PCURVE('',#15948,#16515);+#16515 = DEFINITIONAL_REPRESENTATION('',(#16516),#16520);+#16516 = CIRCLE('',#16517,8.E-02);+#16517 = AXIS2_PLACEMENT_2D('',#16518,#16519);+#16518 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#16519 = DIRECTION('',(1.,0.));+#16520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16521 = PCURVE('',#16140,#16522);+#16522 = DEFINITIONAL_REPRESENTATION('',(#16523),#16527);+#16523 = LINE('',#16524,#16525);+#16524 = CARTESIAN_POINT('',(0.,-0.18));+#16525 = VECTOR('',#16526,1.);+#16526 = DIRECTION('',(1.,0.));+#16527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16528 = ORIENTED_EDGE('',*,*,#16529,.T.);+#16529 = EDGE_CURVE('',#16506,#16530,#16532,.T.);+#16530 = VERTEX_POINT('',#16531);+#16531 = CARTESIAN_POINT('',(5.255,-0.18,0.2));+#16532 = SURFACE_CURVE('',#16533,(#16537,#16544),.PCURVE_S1.);+#16533 = LINE('',#16534,#16535);+#16534 = CARTESIAN_POINT('',(4.5025,-0.18,0.2));+#16535 = VECTOR('',#16536,1.);+#16536 = DIRECTION('',(1.,0.,0.));+#16537 = PCURVE('',#15948,#16538);+#16538 = DEFINITIONAL_REPRESENTATION('',(#16539),#16543);+#16539 = LINE('',#16540,#16541);+#16540 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#16541 = VECTOR('',#16542,1.);+#16542 = DIRECTION('',(0.,1.));+#16543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16544 = PCURVE('',#16168,#16545);+#16545 = DEFINITIONAL_REPRESENTATION('',(#16546),#16550);+#16546 = LINE('',#16547,#16548);+#16547 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#16548 = VECTOR('',#16549,1.);+#16549 = DIRECTION('',(1.,0.));+#16550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16551 = ORIENTED_EDGE('',*,*,#16552,.T.);+#16552 = EDGE_CURVE('',#16530,#16553,#16555,.T.);+#16553 = VERTEX_POINT('',#16554);+#16554 = CARTESIAN_POINT('',(5.255,-0.18,0.));+#16555 = SURFACE_CURVE('',#16556,(#16560,#16567),.PCURVE_S1.);+#16556 = LINE('',#16557,#16558);+#16557 = CARTESIAN_POINT('',(5.255,-0.18,1.223081297441E-02));+#16558 = VECTOR('',#16559,1.);+#16559 = DIRECTION('',(0.,0.,-1.));+#16560 = PCURVE('',#15948,#16561);+#16561 = DEFINITIONAL_REPRESENTATION('',(#16562),#16566);+#16562 = LINE('',#16563,#16564);+#16563 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#16564 = VECTOR('',#16565,1.);+#16565 = DIRECTION('',(-1.,0.));+#16566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16567 = PCURVE('',#16196,#16568);+#16568 = DEFINITIONAL_REPRESENTATION('',(#16569),#16573);+#16569 = LINE('',#16570,#16571);+#16570 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#16571 = VECTOR('',#16572,1.);+#16572 = DIRECTION('',(-1.,0.));+#16573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16574 = ORIENTED_EDGE('',*,*,#16575,.F.);+#16575 = EDGE_CURVE('',#16576,#16553,#16578,.T.);+#16576 = VERTEX_POINT('',#16577);+#16577 = CARTESIAN_POINT('',(4.606430027578,-0.18,-5.551115123126E-17));+#16578 = SURFACE_CURVE('',#16579,(#16583,#16590),.PCURVE_S1.);+#16579 = LINE('',#16580,#16581);+#16580 = CARTESIAN_POINT('',(4.5025,-0.18,0.));+#16581 = VECTOR('',#16582,1.);+#16582 = DIRECTION('',(1.,0.,0.));+#16583 = PCURVE('',#15948,#16584);+#16584 = DEFINITIONAL_REPRESENTATION('',(#16585),#16589);+#16585 = LINE('',#16586,#16587);+#16586 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#16587 = VECTOR('',#16588,1.);+#16588 = DIRECTION('',(0.,1.));+#16589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16590 = PCURVE('',#16224,#16591);+#16591 = DEFINITIONAL_REPRESENTATION('',(#16592),#16596);+#16592 = LINE('',#16593,#16594);+#16593 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#16594 = VECTOR('',#16595,1.);+#16595 = DIRECTION('',(1.,0.));+#16596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16597 = ORIENTED_EDGE('',*,*,#16598,.T.);+#16598 = EDGE_CURVE('',#16576,#16599,#16601,.T.);+#16599 = VERTEX_POINT('',#16600);+#16600 = CARTESIAN_POINT('',(4.363934772754,-0.18,0.140014102897));+#16601 = SURFACE_CURVE('',#16602,(#16607,#16614),.PCURVE_S1.);+#16602 = CIRCLE('',#16603,0.28);+#16603 = AXIS2_PLACEMENT_3D('',#16604,#16605,#16606);+#16604 = CARTESIAN_POINT('',(4.606430027578,-0.18,0.28));+#16605 = DIRECTION('',(0.,1.,0.));+#16606 = DIRECTION('',(0.,0.,1.));+#16607 = PCURVE('',#15948,#16608);+#16608 = DEFINITIONAL_REPRESENTATION('',(#16609),#16613);+#16609 = CIRCLE('',#16610,0.28);+#16610 = AXIS2_PLACEMENT_2D('',#16611,#16612);+#16611 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#16612 = DIRECTION('',(1.,0.));+#16613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16614 = PCURVE('',#16253,#16615);+#16615 = DEFINITIONAL_REPRESENTATION('',(#16616),#16620);+#16616 = LINE('',#16617,#16618);+#16617 = CARTESIAN_POINT('',(0.,-0.18));+#16618 = VECTOR('',#16619,1.);+#16619 = DIRECTION('',(1.,0.));+#16620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16621 = ORIENTED_EDGE('',*,*,#16622,.F.);+#16622 = EDGE_CURVE('',#16623,#16599,#16625,.T.);+#16623 = VERTEX_POINT('',#16624);+#16624 = CARTESIAN_POINT('',(3.832854330943,-0.18,1.059995970601));+#16625 = SURFACE_CURVE('',#16626,(#16630,#16637),.PCURVE_S1.);+#16626 = LINE('',#16627,#16628);+#16627 = CARTESIAN_POINT('',(3.780894551849,-0.18,1.150005036749));+#16628 = VECTOR('',#16629,1.);+#16629 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#16630 = PCURVE('',#15948,#16631);+#16631 = DEFINITIONAL_REPRESENTATION('',(#16632),#16636);+#16632 = LINE('',#16633,#16634);+#16633 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#16634 = VECTOR('',#16635,1.);+#16635 = DIRECTION('',(-0.866054481515,0.499949632511));+#16636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16637 = PCURVE('',#16281,#16638);+#16638 = DEFINITIONAL_REPRESENTATION('',(#16639),#16643);+#16639 = LINE('',#16640,#16641);+#16640 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#16641 = VECTOR('',#16642,1.);+#16642 = DIRECTION('',(1.,0.));+#16643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16644 = ORIENTED_EDGE('',*,*,#16645,.F.);+#16645 = EDGE_CURVE('',#16646,#16623,#16648,.T.);+#16646 = VERTEX_POINT('',#16647);+#16647 = CARTESIAN_POINT('',(3.763569972422,-0.18,1.1));+#16648 = SURFACE_CURVE('',#16649,(#16654,#16661),.PCURVE_S1.);+#16649 = CIRCLE('',#16650,8.E-02);+#16650 = AXIS2_PLACEMENT_3D('',#16651,#16652,#16653);+#16651 = CARTESIAN_POINT('',(3.763569972422,-0.18,1.02));+#16652 = DIRECTION('',(0.,1.,0.));+#16653 = DIRECTION('',(0.,0.,1.));+#16654 = PCURVE('',#15948,#16655);+#16655 = DEFINITIONAL_REPRESENTATION('',(#16656),#16660);+#16656 = CIRCLE('',#16657,8.E-02);+#16657 = AXIS2_PLACEMENT_2D('',#16658,#16659);+#16658 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#16659 = DIRECTION('',(1.,0.));+#16660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16661 = PCURVE('',#16310,#16662);+#16662 = DEFINITIONAL_REPRESENTATION('',(#16663),#16667);+#16663 = LINE('',#16664,#16665);+#16664 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#16665 = VECTOR('',#16666,1.);+#16666 = DIRECTION('',(1.,0.));+#16667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16668 = ORIENTED_EDGE('',*,*,#16669,.F.);+#16669 = EDGE_CURVE('',#16670,#16646,#16672,.T.);+#16670 = VERTEX_POINT('',#16671);+#16671 = CARTESIAN_POINT('',(3.4975,-0.18,1.1));+#16672 = SURFACE_CURVE('',#16673,(#16677,#16684),.PCURVE_S1.);+#16673 = LINE('',#16674,#16675);+#16674 = CARTESIAN_POINT('',(3.4975,-0.18,1.1));+#16675 = VECTOR('',#16676,1.);+#16676 = DIRECTION('',(1.,0.,0.));+#16677 = PCURVE('',#15948,#16678);+#16678 = DEFINITIONAL_REPRESENTATION('',(#16679),#16683);+#16679 = LINE('',#16680,#16681);+#16680 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#16681 = VECTOR('',#16682,1.);+#16682 = DIRECTION('',(0.,1.));+#16683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16684 = PCURVE('',#16338,#16685);+#16685 = DEFINITIONAL_REPRESENTATION('',(#16686),#16690);+#16686 = LINE('',#16687,#16688);+#16687 = CARTESIAN_POINT('',(0.,-0.18));+#16688 = VECTOR('',#16689,1.);+#16689 = DIRECTION('',(1.,0.));+#16690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16691 = ORIENTED_EDGE('',*,*,#16692,.F.);+#16692 = EDGE_CURVE('',#16409,#16670,#16693,.T.);+#16693 = SURFACE_CURVE('',#16694,(#16699,#16710),.PCURVE_S1.);+#16694 = CIRCLE('',#16695,0.1);+#16695 = AXIS2_PLACEMENT_3D('',#16696,#16697,#16698);+#16696 = CARTESIAN_POINT('',(3.4975,-0.18,1.2));+#16697 = DIRECTION('',(0.,-1.,0.));+#16698 = DIRECTION('',(1.,0.,0.));+#16699 = PCURVE('',#15948,#16700);+#16700 = DEFINITIONAL_REPRESENTATION('',(#16701),#16709);+#16701 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16702,#16703,#16704,#16705+ ,#16706,#16707,#16708),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16702 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#16703 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#16704 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#16705 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#16706 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#16707 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#16708 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#16709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16710 = PCURVE('',#16371,#16711);+#16711 = DEFINITIONAL_REPRESENTATION('',(#16712),#16716);+#16712 = LINE('',#16713,#16714);+#16713 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#16714 = VECTOR('',#16715,1.);+#16715 = DIRECTION('',(-1.,0.));+#16716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16717 = ORIENTED_EDGE('',*,*,#16408,.F.);+#16718 = ADVANCED_FACE('',(#16719),#16033,.T.);+#16719 = FACE_BOUND('',#16720,.T.);+#16720 = EDGE_LOOP('',(#16721,#16722,#16723,#16744));+#16721 = ORIENTED_EDGE('',*,*,#16017,.F.);+#16722 = ORIENTED_EDGE('',*,*,#16458,.T.);+#16723 = ORIENTED_EDGE('',*,*,#16724,.T.);+#16724 = EDGE_CURVE('',#16459,#16072,#16725,.T.);+#16725 = SURFACE_CURVE('',#16726,(#16730,#16737),.PCURVE_S1.);+#16726 = LINE('',#16727,#16728);+#16727 = CARTESIAN_POINT('',(4.006065227246,-0.18,1.159985897103));+#16728 = VECTOR('',#16729,1.);+#16729 = DIRECTION('',(0.,1.,0.));+#16730 = PCURVE('',#16033,#16731);+#16731 = DEFINITIONAL_REPRESENTATION('',(#16732),#16736);+#16732 = LINE('',#16733,#16734);+#16733 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#16734 = VECTOR('',#16735,1.);+#16735 = DIRECTION('',(-0.,1.));+#16736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16737 = PCURVE('',#16111,#16738);+#16738 = DEFINITIONAL_REPRESENTATION('',(#16739),#16743);+#16739 = LINE('',#16740,#16741);+#16740 = CARTESIAN_POINT('',(0.,-0.18));+#16741 = VECTOR('',#16742,1.);+#16742 = DIRECTION('',(0.,1.));+#16743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16744 = ORIENTED_EDGE('',*,*,#16071,.F.);+#16745 = ADVANCED_FACE('',(#16746),#16371,.T.);+#16746 = FACE_BOUND('',#16747,.T.);+#16747 = EDGE_LOOP('',(#16748,#16749,#16770,#16771));+#16748 = ORIENTED_EDGE('',*,*,#16350,.T.);+#16749 = ORIENTED_EDGE('',*,*,#16750,.T.);+#16750 = EDGE_CURVE('',#16323,#16670,#16751,.T.);+#16751 = SURFACE_CURVE('',#16752,(#16756,#16763),.PCURVE_S1.);+#16752 = LINE('',#16753,#16754);+#16753 = CARTESIAN_POINT('',(3.4975,0.18,1.1));+#16754 = VECTOR('',#16755,1.);+#16755 = DIRECTION('',(0.,-1.,0.));+#16756 = PCURVE('',#16371,#16757);+#16757 = DEFINITIONAL_REPRESENTATION('',(#16758),#16762);+#16758 = LINE('',#16759,#16760);+#16759 = CARTESIAN_POINT('',(1.570796326795,0.18));+#16760 = VECTOR('',#16761,1.);+#16761 = DIRECTION('',(-0.,-1.));+#16762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16763 = PCURVE('',#16338,#16764);+#16764 = DEFINITIONAL_REPRESENTATION('',(#16765),#16769);+#16765 = LINE('',#16766,#16767);+#16766 = CARTESIAN_POINT('',(0.,0.18));+#16767 = VECTOR('',#16768,1.);+#16768 = DIRECTION('',(0.,-1.));+#16769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16770 = ORIENTED_EDGE('',*,*,#16692,.F.);+#16771 = ORIENTED_EDGE('',*,*,#16431,.T.);+#16772 = ADVANCED_FACE('',(#16773),#16338,.F.);+#16773 = FACE_BOUND('',#16774,.F.);+#16774 = EDGE_LOOP('',(#16775,#16776,#16797,#16798));+#16775 = ORIENTED_EDGE('',*,*,#16669,.T.);+#16776 = ORIENTED_EDGE('',*,*,#16777,.F.);+#16777 = EDGE_CURVE('',#16294,#16646,#16778,.T.);+#16778 = SURFACE_CURVE('',#16779,(#16783,#16790),.PCURVE_S1.);+#16779 = LINE('',#16780,#16781);+#16780 = CARTESIAN_POINT('',(3.763569972422,0.18,1.1));+#16781 = VECTOR('',#16782,1.);+#16782 = DIRECTION('',(0.,-1.,0.));+#16783 = PCURVE('',#16338,#16784);+#16784 = DEFINITIONAL_REPRESENTATION('',(#16785),#16789);+#16785 = LINE('',#16786,#16787);+#16786 = CARTESIAN_POINT('',(0.266069972422,0.18));+#16787 = VECTOR('',#16788,1.);+#16788 = DIRECTION('',(0.,-1.));+#16789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16790 = PCURVE('',#16310,#16791);+#16791 = DEFINITIONAL_REPRESENTATION('',(#16792),#16796);+#16792 = LINE('',#16793,#16794);+#16793 = CARTESIAN_POINT('',(0.,0.18));+#16794 = VECTOR('',#16795,1.);+#16795 = DIRECTION('',(0.,-1.));+#16796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16797 = ORIENTED_EDGE('',*,*,#16322,.F.);+#16798 = ORIENTED_EDGE('',*,*,#16750,.T.);+#16799 = ADVANCED_FACE('',(#16800),#16310,.F.);+#16800 = FACE_BOUND('',#16801,.F.);+#16801 = EDGE_LOOP('',(#16802,#16803,#16824,#16825));+#16802 = ORIENTED_EDGE('',*,*,#16645,.T.);+#16803 = ORIENTED_EDGE('',*,*,#16804,.F.);+#16804 = EDGE_CURVE('',#16266,#16623,#16805,.T.);+#16805 = SURFACE_CURVE('',#16806,(#16810,#16817),.PCURVE_S1.);+#16806 = LINE('',#16807,#16808);+#16807 = CARTESIAN_POINT('',(3.832854330943,0.18,1.059995970601));+#16808 = VECTOR('',#16809,1.);+#16809 = DIRECTION('',(0.,-1.,0.));+#16810 = PCURVE('',#16310,#16811);+#16811 = DEFINITIONAL_REPRESENTATION('',(#16812),#16816);+#16812 = LINE('',#16813,#16814);+#16813 = CARTESIAN_POINT('',(1.047255709587,0.18));+#16814 = VECTOR('',#16815,1.);+#16815 = DIRECTION('',(0.,-1.));+#16816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16817 = PCURVE('',#16281,#16818);+#16818 = DEFINITIONAL_REPRESENTATION('',(#16819),#16823);+#16819 = LINE('',#16820,#16821);+#16820 = CARTESIAN_POINT('',(0.,0.18));+#16821 = VECTOR('',#16822,1.);+#16822 = DIRECTION('',(0.,-1.));+#16823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16824 = ORIENTED_EDGE('',*,*,#16293,.F.);+#16825 = ORIENTED_EDGE('',*,*,#16777,.T.);+#16826 = ADVANCED_FACE('',(#16827),#16281,.F.);+#16827 = FACE_BOUND('',#16828,.F.);+#16828 = EDGE_LOOP('',(#16829,#16830,#16851,#16852));+#16829 = ORIENTED_EDGE('',*,*,#16622,.T.);+#16830 = ORIENTED_EDGE('',*,*,#16831,.F.);+#16831 = EDGE_CURVE('',#16237,#16599,#16832,.T.);+#16832 = SURFACE_CURVE('',#16833,(#16837,#16844),.PCURVE_S1.);+#16833 = LINE('',#16834,#16835);+#16834 = CARTESIAN_POINT('',(4.363934772754,0.18,0.140014102897));+#16835 = VECTOR('',#16836,1.);+#16836 = DIRECTION('',(0.,-1.,0.));+#16837 = PCURVE('',#16281,#16838);+#16838 = DEFINITIONAL_REPRESENTATION('',(#16839),#16843);+#16839 = LINE('',#16840,#16841);+#16840 = CARTESIAN_POINT('',(1.062267891155,0.18));+#16841 = VECTOR('',#16842,1.);+#16842 = DIRECTION('',(0.,-1.));+#16843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16844 = PCURVE('',#16253,#16845);+#16845 = DEFINITIONAL_REPRESENTATION('',(#16846),#16850);+#16846 = LINE('',#16847,#16848);+#16847 = CARTESIAN_POINT('',(4.188848363177,0.18));+#16848 = VECTOR('',#16849,1.);+#16849 = DIRECTION('',(0.,-1.));+#16850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16851 = ORIENTED_EDGE('',*,*,#16265,.F.);+#16852 = ORIENTED_EDGE('',*,*,#16804,.T.);+#16853 = ADVANCED_FACE('',(#16854),#16253,.T.);+#16854 = FACE_BOUND('',#16855,.T.);+#16855 = EDGE_LOOP('',(#16856,#16857,#16858,#16859));+#16856 = ORIENTED_EDGE('',*,*,#16598,.T.);+#16857 = ORIENTED_EDGE('',*,*,#16831,.F.);+#16858 = ORIENTED_EDGE('',*,*,#16236,.F.);+#16859 = ORIENTED_EDGE('',*,*,#16860,.T.);+#16860 = EDGE_CURVE('',#16209,#16576,#16861,.T.);+#16861 = SURFACE_CURVE('',#16862,(#16866,#16873),.PCURVE_S1.);+#16862 = LINE('',#16863,#16864);+#16863 = CARTESIAN_POINT('',(4.606430027578,0.18,-5.551115123126E-17));+#16864 = VECTOR('',#16865,1.);+#16865 = DIRECTION('',(0.,-1.,0.));+#16866 = PCURVE('',#16253,#16867);+#16867 = DEFINITIONAL_REPRESENTATION('',(#16868),#16872);+#16868 = LINE('',#16869,#16870);+#16869 = CARTESIAN_POINT('',(3.14159265359,0.18));+#16870 = VECTOR('',#16871,1.);+#16871 = DIRECTION('',(0.,-1.));+#16872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16873 = PCURVE('',#16224,#16874);+#16874 = DEFINITIONAL_REPRESENTATION('',(#16875),#16879);+#16875 = LINE('',#16876,#16877);+#16876 = CARTESIAN_POINT('',(0.,0.18));+#16877 = VECTOR('',#16878,1.);+#16878 = DIRECTION('',(0.,-1.));+#16879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16880 = ADVANCED_FACE('',(#16881),#16224,.F.);+#16881 = FACE_BOUND('',#16882,.F.);+#16882 = EDGE_LOOP('',(#16883,#16884,#16885,#16906));+#16883 = ORIENTED_EDGE('',*,*,#16860,.T.);+#16884 = ORIENTED_EDGE('',*,*,#16575,.T.);+#16885 = ORIENTED_EDGE('',*,*,#16886,.T.);+#16886 = EDGE_CURVE('',#16553,#16181,#16887,.T.);+#16887 = SURFACE_CURVE('',#16888,(#16892,#16899),.PCURVE_S1.);+#16888 = LINE('',#16889,#16890);+#16889 = CARTESIAN_POINT('',(5.255,-0.34,0.));+#16890 = VECTOR('',#16891,1.);+#16891 = DIRECTION('',(0.,1.,0.));+#16892 = PCURVE('',#16224,#16893);+#16893 = DEFINITIONAL_REPRESENTATION('',(#16894),#16898);+#16894 = LINE('',#16895,#16896);+#16895 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#16896 = VECTOR('',#16897,1.);+#16897 = DIRECTION('',(0.,1.));+#16898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16899 = PCURVE('',#16196,#16900);+#16900 = DEFINITIONAL_REPRESENTATION('',(#16901),#16905);+#16901 = LINE('',#16902,#16903);+#16902 = CARTESIAN_POINT('',(0.5,-0.34));+#16903 = VECTOR('',#16904,1.);+#16904 = DIRECTION('',(0.,-1.));+#16905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16906 = ORIENTED_EDGE('',*,*,#16208,.F.);+#16907 = ADVANCED_FACE('',(#16908),#16196,.T.);+#16908 = FACE_BOUND('',#16909,.T.);+#16909 = EDGE_LOOP('',(#16910,#16931,#16932,#16933));+#16910 = ORIENTED_EDGE('',*,*,#16911,.F.);+#16911 = EDGE_CURVE('',#16530,#16153,#16912,.T.);+#16912 = SURFACE_CURVE('',#16913,(#16917,#16924),.PCURVE_S1.);+#16913 = LINE('',#16914,#16915);+#16914 = CARTESIAN_POINT('',(5.255,-0.34,0.2));+#16915 = VECTOR('',#16916,1.);+#16916 = DIRECTION('',(0.,1.,0.));+#16917 = PCURVE('',#16196,#16918);+#16918 = DEFINITIONAL_REPRESENTATION('',(#16919),#16923);+#16919 = LINE('',#16920,#16921);+#16920 = CARTESIAN_POINT('',(0.7,-0.34));+#16921 = VECTOR('',#16922,1.);+#16922 = DIRECTION('',(0.,-1.));+#16923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16924 = PCURVE('',#16168,#16925);+#16925 = DEFINITIONAL_REPRESENTATION('',(#16926),#16930);+#16926 = LINE('',#16927,#16928);+#16927 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#16928 = VECTOR('',#16929,1.);+#16929 = DIRECTION('',(0.,1.));+#16930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16931 = ORIENTED_EDGE('',*,*,#16552,.T.);+#16932 = ORIENTED_EDGE('',*,*,#16886,.T.);+#16933 = ORIENTED_EDGE('',*,*,#16180,.F.);+#16934 = ADVANCED_FACE('',(#16935),#16168,.T.);+#16935 = FACE_BOUND('',#16936,.T.);+#16936 = EDGE_LOOP('',(#16937,#16958,#16959,#16960));+#16937 = ORIENTED_EDGE('',*,*,#16938,.T.);+#16938 = EDGE_CURVE('',#16124,#16506,#16939,.T.);+#16939 = SURFACE_CURVE('',#16940,(#16944,#16951),.PCURVE_S1.);+#16940 = LINE('',#16941,#16942);+#16941 = CARTESIAN_POINT('',(4.606430027578,0.18,0.2));+#16942 = VECTOR('',#16943,1.);+#16943 = DIRECTION('',(0.,-1.,0.));+#16944 = PCURVE('',#16168,#16945);+#16945 = DEFINITIONAL_REPRESENTATION('',(#16946),#16950);+#16946 = LINE('',#16947,#16948);+#16947 = CARTESIAN_POINT('',(0.,0.18));+#16948 = VECTOR('',#16949,1.);+#16949 = DIRECTION('',(0.,-1.));+#16950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16951 = PCURVE('',#16140,#16952);+#16952 = DEFINITIONAL_REPRESENTATION('',(#16953),#16957);+#16953 = LINE('',#16954,#16955);+#16954 = CARTESIAN_POINT('',(3.14159265359,0.18));+#16955 = VECTOR('',#16956,1.);+#16956 = DIRECTION('',(0.,-1.));+#16957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16958 = ORIENTED_EDGE('',*,*,#16529,.T.);+#16959 = ORIENTED_EDGE('',*,*,#16911,.T.);+#16960 = ORIENTED_EDGE('',*,*,#16152,.F.);+#16961 = ADVANCED_FACE('',(#16962),#16140,.F.);+#16962 = FACE_BOUND('',#16963,.F.);+#16963 = EDGE_LOOP('',(#16964,#16965,#16986,#16987));+#16964 = ORIENTED_EDGE('',*,*,#16505,.T.);+#16965 = ORIENTED_EDGE('',*,*,#16966,.F.);+#16966 = EDGE_CURVE('',#16096,#16483,#16967,.T.);+#16967 = SURFACE_CURVE('',#16968,(#16972,#16979),.PCURVE_S1.);+#16968 = LINE('',#16969,#16970);+#16969 = CARTESIAN_POINT('',(4.537145669057,0.18,0.240004029399));+#16970 = VECTOR('',#16971,1.);+#16971 = DIRECTION('',(0.,-1.,0.));+#16972 = PCURVE('',#16140,#16973);+#16973 = DEFINITIONAL_REPRESENTATION('',(#16974),#16978);+#16974 = LINE('',#16975,#16976);+#16975 = CARTESIAN_POINT('',(4.188848363177,0.18));+#16976 = VECTOR('',#16977,1.);+#16977 = DIRECTION('',(0.,-1.));+#16978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16979 = PCURVE('',#16111,#16980);+#16980 = DEFINITIONAL_REPRESENTATION('',(#16981),#16985);+#16981 = LINE('',#16982,#16983);+#16982 = CARTESIAN_POINT('',(1.062267891155,0.18));+#16983 = VECTOR('',#16984,1.);+#16984 = DIRECTION('',(0.,-1.));+#16985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16986 = ORIENTED_EDGE('',*,*,#16123,.F.);+#16987 = ORIENTED_EDGE('',*,*,#16938,.T.);+#16988 = ADVANCED_FACE('',(#16989),#16111,.T.);+#16989 = FACE_BOUND('',#16990,.T.);+#16990 = EDGE_LOOP('',(#16991,#16992,#16993,#16994));+#16991 = ORIENTED_EDGE('',*,*,#16724,.F.);+#16992 = ORIENTED_EDGE('',*,*,#16482,.T.);+#16993 = ORIENTED_EDGE('',*,*,#16966,.F.);+#16994 = ORIENTED_EDGE('',*,*,#16095,.F.);+#16995 = MANIFOLD_SOLID_BREP('',#16996);+#16996 = CLOSED_SHELL('',(#16997,#17127,#17203,#17541,#17590,#17856,+ #17883,#17910,#17937,#17964,#17991,#18018,#18045,#18072,#18099,+ #18126));+#16997 = ADVANCED_FACE('',(#16998),#17013,.T.);+#16998 = FACE_BOUND('',#16999,.T.);+#16999 = EDGE_LOOP('',(#17000,#17040,#17068,#17101));+#17000 = ORIENTED_EDGE('',*,*,#17001,.T.);+#17001 = EDGE_CURVE('',#17002,#17004,#17006,.T.);+#17002 = VERTEX_POINT('',#17003);+#17003 = CARTESIAN_POINT('',(3.4975,1.45,1.3));+#17004 = VERTEX_POINT('',#17005);+#17005 = CARTESIAN_POINT('',(3.4475,1.45,1.286602540378));+#17006 = SURFACE_CURVE('',#17007,(#17012,#17024),.PCURVE_S1.);+#17007 = CIRCLE('',#17008,0.1);+#17008 = AXIS2_PLACEMENT_3D('',#17009,#17010,#17011);+#17009 = CARTESIAN_POINT('',(3.4975,1.45,1.2));+#17010 = DIRECTION('',(0.,-1.,0.));+#17011 = DIRECTION('',(1.,0.,0.));+#17012 = PCURVE('',#17013,#17018);+#17013 = CYLINDRICAL_SURFACE('',#17014,0.1);+#17014 = AXIS2_PLACEMENT_3D('',#17015,#17016,#17017);+#17015 = CARTESIAN_POINT('',(3.4975,1.27,1.2));+#17016 = DIRECTION('',(0.,1.,0.));+#17017 = DIRECTION('',(1.,0.,0.));+#17018 = DEFINITIONAL_REPRESENTATION('',(#17019),#17023);+#17019 = LINE('',#17020,#17021);+#17020 = CARTESIAN_POINT('',(6.28318530718,0.18));+#17021 = VECTOR('',#17022,1.);+#17022 = DIRECTION('',(-1.,-0.));+#17023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17024 = PCURVE('',#17025,#17030);+#17025 = PLANE('',#17026);+#17026 = AXIS2_PLACEMENT_3D('',#17027,#17028,#17029);+#17027 = CARTESIAN_POINT('',(4.408401242914,1.45,0.524461625949));+#17028 = DIRECTION('',(0.,1.,0.));+#17029 = DIRECTION('',(0.,0.,1.));+#17030 = DEFINITIONAL_REPRESENTATION('',(#17031),#17039);+#17031 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17032,#17033,#17034,#17035+ ,#17036,#17037,#17038),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17032 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17033 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#17034 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#17035 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#17036 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#17037 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#17038 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17040 = ORIENTED_EDGE('',*,*,#17041,.F.);+#17041 = EDGE_CURVE('',#17042,#17004,#17044,.T.);+#17042 = VERTEX_POINT('',#17043);+#17043 = CARTESIAN_POINT('',(3.4475,1.09,1.286602540378));+#17044 = SURFACE_CURVE('',#17045,(#17049,#17056),.PCURVE_S1.);+#17045 = LINE('',#17046,#17047);+#17046 = CARTESIAN_POINT('',(3.4475,1.27,1.286602540378));+#17047 = VECTOR('',#17048,1.);+#17048 = DIRECTION('',(0.,1.,0.));+#17049 = PCURVE('',#17013,#17050);+#17050 = DEFINITIONAL_REPRESENTATION('',(#17051),#17055);+#17051 = LINE('',#17052,#17053);+#17052 = CARTESIAN_POINT('',(4.188790204787,0.));+#17053 = VECTOR('',#17054,1.);+#17054 = DIRECTION('',(-0.,1.));+#17055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17056 = PCURVE('',#17057,#17062);+#17057 = PLANE('',#17058);+#17058 = AXIS2_PLACEMENT_3D('',#17059,#17060,#17061);+#17059 = CARTESIAN_POINT('',(3.4475,0.59,-0.5));+#17060 = DIRECTION('',(1.,0.,0.));+#17061 = DIRECTION('',(0.,0.,1.));+#17062 = DEFINITIONAL_REPRESENTATION('',(#17063),#17067);+#17063 = LINE('',#17064,#17065);+#17064 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#17065 = VECTOR('',#17066,1.);+#17066 = DIRECTION('',(0.,-1.));+#17067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17068 = ORIENTED_EDGE('',*,*,#17069,.F.);+#17069 = EDGE_CURVE('',#17070,#17042,#17072,.T.);+#17070 = VERTEX_POINT('',#17071);+#17071 = CARTESIAN_POINT('',(3.4975,1.09,1.3));+#17072 = SURFACE_CURVE('',#17073,(#17078,#17085),.PCURVE_S1.);+#17073 = CIRCLE('',#17074,0.1);+#17074 = AXIS2_PLACEMENT_3D('',#17075,#17076,#17077);+#17075 = CARTESIAN_POINT('',(3.4975,1.09,1.2));+#17076 = DIRECTION('',(0.,-1.,0.));+#17077 = DIRECTION('',(1.,0.,0.));+#17078 = PCURVE('',#17013,#17079);+#17079 = DEFINITIONAL_REPRESENTATION('',(#17080),#17084);+#17080 = LINE('',#17081,#17082);+#17081 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#17082 = VECTOR('',#17083,1.);+#17083 = DIRECTION('',(-1.,0.));+#17084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17085 = PCURVE('',#17086,#17091);+#17086 = PLANE('',#17087);+#17087 = AXIS2_PLACEMENT_3D('',#17088,#17089,#17090);+#17088 = CARTESIAN_POINT('',(4.408401242914,1.09,0.524461625949));+#17089 = DIRECTION('',(0.,1.,0.));+#17090 = DIRECTION('',(0.,0.,1.));+#17091 = DEFINITIONAL_REPRESENTATION('',(#17092),#17100);+#17092 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17093,#17094,#17095,#17096+ ,#17097,#17098,#17099),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17093 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17094 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#17095 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#17096 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#17097 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#17098 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#17099 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17101 = ORIENTED_EDGE('',*,*,#17102,.T.);+#17102 = EDGE_CURVE('',#17070,#17002,#17103,.T.);+#17103 = SURFACE_CURVE('',#17104,(#17108,#17115),.PCURVE_S1.);+#17104 = LINE('',#17105,#17106);+#17105 = CARTESIAN_POINT('',(3.4975,1.09,1.3));+#17106 = VECTOR('',#17107,1.);+#17107 = DIRECTION('',(0.,1.,0.));+#17108 = PCURVE('',#17013,#17109);+#17109 = DEFINITIONAL_REPRESENTATION('',(#17110),#17114);+#17110 = LINE('',#17111,#17112);+#17111 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#17112 = VECTOR('',#17113,1.);+#17113 = DIRECTION('',(0.,1.));+#17114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17115 = PCURVE('',#17116,#17121);+#17116 = PLANE('',#17117);+#17117 = AXIS2_PLACEMENT_3D('',#17118,#17119,#17120);+#17118 = CARTESIAN_POINT('',(3.4975,1.27,1.3));+#17119 = DIRECTION('',(0.,0.,1.));+#17120 = DIRECTION('',(1.,0.,0.));+#17121 = DEFINITIONAL_REPRESENTATION('',(#17122),#17126);+#17122 = LINE('',#17123,#17124);+#17123 = CARTESIAN_POINT('',(0.,-0.18));+#17124 = VECTOR('',#17125,1.);+#17125 = DIRECTION('',(0.,1.));+#17126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17127 = ADVANCED_FACE('',(#17128),#17116,.T.);+#17128 = FACE_BOUND('',#17129,.T.);+#17129 = EDGE_LOOP('',(#17130,#17131,#17154,#17182));+#17130 = ORIENTED_EDGE('',*,*,#17102,.F.);+#17131 = ORIENTED_EDGE('',*,*,#17132,.T.);+#17132 = EDGE_CURVE('',#17070,#17133,#17135,.T.);+#17133 = VERTEX_POINT('',#17134);+#17134 = CARTESIAN_POINT('',(3.763569972422,1.09,1.3));+#17135 = SURFACE_CURVE('',#17136,(#17140,#17147),.PCURVE_S1.);+#17136 = LINE('',#17137,#17138);+#17137 = CARTESIAN_POINT('',(3.4975,1.09,1.3));+#17138 = VECTOR('',#17139,1.);+#17139 = DIRECTION('',(1.,0.,0.));+#17140 = PCURVE('',#17116,#17141);+#17141 = DEFINITIONAL_REPRESENTATION('',(#17142),#17146);+#17142 = LINE('',#17143,#17144);+#17143 = CARTESIAN_POINT('',(0.,-0.18));+#17144 = VECTOR('',#17145,1.);+#17145 = DIRECTION('',(1.,0.));+#17146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17147 = PCURVE('',#17086,#17148);+#17148 = DEFINITIONAL_REPRESENTATION('',(#17149),#17153);+#17149 = LINE('',#17150,#17151);+#17150 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#17151 = VECTOR('',#17152,1.);+#17152 = DIRECTION('',(0.,1.));+#17153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17154 = ORIENTED_EDGE('',*,*,#17155,.T.);+#17155 = EDGE_CURVE('',#17133,#17156,#17158,.T.);+#17156 = VERTEX_POINT('',#17157);+#17157 = CARTESIAN_POINT('',(3.763569972422,1.45,1.3));+#17158 = SURFACE_CURVE('',#17159,(#17163,#17170),.PCURVE_S1.);+#17159 = LINE('',#17160,#17161);+#17160 = CARTESIAN_POINT('',(3.763569972422,1.09,1.3));+#17161 = VECTOR('',#17162,1.);+#17162 = DIRECTION('',(0.,1.,0.));+#17163 = PCURVE('',#17116,#17164);+#17164 = DEFINITIONAL_REPRESENTATION('',(#17165),#17169);+#17165 = LINE('',#17166,#17167);+#17166 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#17167 = VECTOR('',#17168,1.);+#17168 = DIRECTION('',(0.,1.));+#17169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17170 = PCURVE('',#17171,#17176);+#17171 = CYLINDRICAL_SURFACE('',#17172,0.28);+#17172 = AXIS2_PLACEMENT_3D('',#17173,#17174,#17175);+#17173 = CARTESIAN_POINT('',(3.763569972422,1.27,1.02));+#17174 = DIRECTION('',(0.,1.,0.));+#17175 = DIRECTION('',(0.,0.,1.));+#17176 = DEFINITIONAL_REPRESENTATION('',(#17177),#17181);+#17177 = LINE('',#17178,#17179);+#17178 = CARTESIAN_POINT('',(0.,-0.18));+#17179 = VECTOR('',#17180,1.);+#17180 = DIRECTION('',(-0.,1.));+#17181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17182 = ORIENTED_EDGE('',*,*,#17183,.F.);+#17183 = EDGE_CURVE('',#17002,#17156,#17184,.T.);+#17184 = SURFACE_CURVE('',#17185,(#17189,#17196),.PCURVE_S1.);+#17185 = LINE('',#17186,#17187);+#17186 = CARTESIAN_POINT('',(3.4975,1.45,1.3));+#17187 = VECTOR('',#17188,1.);+#17188 = DIRECTION('',(1.,0.,0.));+#17189 = PCURVE('',#17116,#17190);+#17190 = DEFINITIONAL_REPRESENTATION('',(#17191),#17195);+#17191 = LINE('',#17192,#17193);+#17192 = CARTESIAN_POINT('',(0.,0.18));+#17193 = VECTOR('',#17194,1.);+#17194 = DIRECTION('',(1.,0.));+#17195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17196 = PCURVE('',#17025,#17197);+#17197 = DEFINITIONAL_REPRESENTATION('',(#17198),#17202);+#17198 = LINE('',#17199,#17200);+#17199 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#17200 = VECTOR('',#17201,1.);+#17201 = DIRECTION('',(0.,1.));+#17202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17203 = ADVANCED_FACE('',(#17204),#17025,.T.);+#17204 = FACE_BOUND('',#17205,.T.);+#17205 = EDGE_LOOP('',(#17206,#17207,#17208,#17232,#17260,#17289,#17317,+ #17345,#17373,#17402,#17430,#17459,#17487,#17520));+#17206 = ORIENTED_EDGE('',*,*,#17001,.F.);+#17207 = ORIENTED_EDGE('',*,*,#17183,.T.);+#17208 = ORIENTED_EDGE('',*,*,#17209,.T.);+#17209 = EDGE_CURVE('',#17156,#17210,#17212,.T.);+#17210 = VERTEX_POINT('',#17211);+#17211 = CARTESIAN_POINT('',(4.006065227246,1.45,1.159985897103));+#17212 = SURFACE_CURVE('',#17213,(#17218,#17225),.PCURVE_S1.);+#17213 = CIRCLE('',#17214,0.28);+#17214 = AXIS2_PLACEMENT_3D('',#17215,#17216,#17217);+#17215 = CARTESIAN_POINT('',(3.763569972422,1.45,1.02));+#17216 = DIRECTION('',(0.,1.,0.));+#17217 = DIRECTION('',(0.,0.,1.));+#17218 = PCURVE('',#17025,#17219);+#17219 = DEFINITIONAL_REPRESENTATION('',(#17220),#17224);+#17220 = CIRCLE('',#17221,0.28);+#17221 = AXIS2_PLACEMENT_2D('',#17222,#17223);+#17222 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#17223 = DIRECTION('',(1.,0.));+#17224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17225 = PCURVE('',#17171,#17226);+#17226 = DEFINITIONAL_REPRESENTATION('',(#17227),#17231);+#17227 = LINE('',#17228,#17229);+#17228 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#17229 = VECTOR('',#17230,1.);+#17230 = DIRECTION('',(1.,-0.));+#17231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17232 = ORIENTED_EDGE('',*,*,#17233,.T.);+#17233 = EDGE_CURVE('',#17210,#17234,#17236,.T.);+#17234 = VERTEX_POINT('',#17235);+#17235 = CARTESIAN_POINT('',(4.537145669057,1.45,0.240004029399));+#17236 = SURFACE_CURVE('',#17237,(#17241,#17248),.PCURVE_S1.);+#17237 = LINE('',#17238,#17239);+#17238 = CARTESIAN_POINT('',(3.954105448151,1.45,1.249994963251));+#17239 = VECTOR('',#17240,1.);+#17240 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17241 = PCURVE('',#17025,#17242);+#17242 = DEFINITIONAL_REPRESENTATION('',(#17243),#17247);+#17243 = LINE('',#17244,#17245);+#17244 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#17245 = VECTOR('',#17246,1.);+#17246 = DIRECTION('',(-0.866054481515,0.499949632511));+#17247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17248 = PCURVE('',#17249,#17254);+#17249 = PLANE('',#17250);+#17250 = AXIS2_PLACEMENT_3D('',#17251,#17252,#17253);+#17251 = CARTESIAN_POINT('',(4.006065227246,1.27,1.159985897103));+#17252 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#17253 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17254 = DEFINITIONAL_REPRESENTATION('',(#17255),#17259);+#17255 = LINE('',#17256,#17257);+#17256 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#17257 = VECTOR('',#17258,1.);+#17258 = DIRECTION('',(1.,0.));+#17259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17260 = ORIENTED_EDGE('',*,*,#17261,.F.);+#17261 = EDGE_CURVE('',#17262,#17234,#17264,.T.);+#17262 = VERTEX_POINT('',#17263);+#17263 = CARTESIAN_POINT('',(4.606430027578,1.45,0.2));+#17264 = SURFACE_CURVE('',#17265,(#17270,#17277),.PCURVE_S1.);+#17265 = CIRCLE('',#17266,8.E-02);+#17266 = AXIS2_PLACEMENT_3D('',#17267,#17268,#17269);+#17267 = CARTESIAN_POINT('',(4.606430027578,1.45,0.28));+#17268 = DIRECTION('',(0.,1.,0.));+#17269 = DIRECTION('',(0.,0.,1.));+#17270 = PCURVE('',#17025,#17271);+#17271 = DEFINITIONAL_REPRESENTATION('',(#17272),#17276);+#17272 = CIRCLE('',#17273,8.E-02);+#17273 = AXIS2_PLACEMENT_2D('',#17274,#17275);+#17274 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#17275 = DIRECTION('',(1.,0.));+#17276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17277 = PCURVE('',#17278,#17283);+#17278 = CYLINDRICAL_SURFACE('',#17279,8.E-02);+#17279 = AXIS2_PLACEMENT_3D('',#17280,#17281,#17282);+#17280 = CARTESIAN_POINT('',(4.606430027578,1.27,0.28));+#17281 = DIRECTION('',(0.,1.,0.));+#17282 = DIRECTION('',(0.,0.,1.));+#17283 = DEFINITIONAL_REPRESENTATION('',(#17284),#17288);+#17284 = LINE('',#17285,#17286);+#17285 = CARTESIAN_POINT('',(-0.,0.18));+#17286 = VECTOR('',#17287,1.);+#17287 = DIRECTION('',(1.,-0.));+#17288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17289 = ORIENTED_EDGE('',*,*,#17290,.T.);+#17290 = EDGE_CURVE('',#17262,#17291,#17293,.T.);+#17291 = VERTEX_POINT('',#17292);+#17292 = CARTESIAN_POINT('',(5.255,1.45,0.2));+#17293 = SURFACE_CURVE('',#17294,(#17298,#17305),.PCURVE_S1.);+#17294 = LINE('',#17295,#17296);+#17295 = CARTESIAN_POINT('',(4.5025,1.45,0.2));+#17296 = VECTOR('',#17297,1.);+#17297 = DIRECTION('',(1.,0.,0.));+#17298 = PCURVE('',#17025,#17299);+#17299 = DEFINITIONAL_REPRESENTATION('',(#17300),#17304);+#17300 = LINE('',#17301,#17302);+#17301 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#17302 = VECTOR('',#17303,1.);+#17303 = DIRECTION('',(0.,1.));+#17304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17305 = PCURVE('',#17306,#17311);+#17306 = PLANE('',#17307);+#17307 = AXIS2_PLACEMENT_3D('',#17308,#17309,#17310);+#17308 = CARTESIAN_POINT('',(4.606430027578,1.27,0.2));+#17309 = DIRECTION('',(0.,0.,1.));+#17310 = DIRECTION('',(1.,0.,0.));+#17311 = DEFINITIONAL_REPRESENTATION('',(#17312),#17316);+#17312 = LINE('',#17313,#17314);+#17313 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#17314 = VECTOR('',#17315,1.);+#17315 = DIRECTION('',(1.,0.));+#17316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17317 = ORIENTED_EDGE('',*,*,#17318,.T.);+#17318 = EDGE_CURVE('',#17291,#17319,#17321,.T.);+#17319 = VERTEX_POINT('',#17320);+#17320 = CARTESIAN_POINT('',(5.255,1.45,0.));+#17321 = SURFACE_CURVE('',#17322,(#17326,#17333),.PCURVE_S1.);+#17322 = LINE('',#17323,#17324);+#17323 = CARTESIAN_POINT('',(5.255,1.45,1.223081297441E-02));+#17324 = VECTOR('',#17325,1.);+#17325 = DIRECTION('',(0.,0.,-1.));+#17326 = PCURVE('',#17025,#17327);+#17327 = DEFINITIONAL_REPRESENTATION('',(#17328),#17332);+#17328 = LINE('',#17329,#17330);+#17329 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#17330 = VECTOR('',#17331,1.);+#17331 = DIRECTION('',(-1.,0.));+#17332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17333 = PCURVE('',#17334,#17339);+#17334 = PLANE('',#17335);+#17335 = AXIS2_PLACEMENT_3D('',#17336,#17337,#17338);+#17336 = CARTESIAN_POINT('',(5.255,0.59,-0.5));+#17337 = DIRECTION('',(1.,0.,0.));+#17338 = DIRECTION('',(0.,0.,1.));+#17339 = DEFINITIONAL_REPRESENTATION('',(#17340),#17344);+#17340 = LINE('',#17341,#17342);+#17341 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#17342 = VECTOR('',#17343,1.);+#17343 = DIRECTION('',(-1.,0.));+#17344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17345 = ORIENTED_EDGE('',*,*,#17346,.F.);+#17346 = EDGE_CURVE('',#17347,#17319,#17349,.T.);+#17347 = VERTEX_POINT('',#17348);+#17348 = CARTESIAN_POINT('',(4.606430027578,1.45,-5.551115123126E-17));+#17349 = SURFACE_CURVE('',#17350,(#17354,#17361),.PCURVE_S1.);+#17350 = LINE('',#17351,#17352);+#17351 = CARTESIAN_POINT('',(4.5025,1.45,0.));+#17352 = VECTOR('',#17353,1.);+#17353 = DIRECTION('',(1.,0.,0.));+#17354 = PCURVE('',#17025,#17355);+#17355 = DEFINITIONAL_REPRESENTATION('',(#17356),#17360);+#17356 = LINE('',#17357,#17358);+#17357 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#17358 = VECTOR('',#17359,1.);+#17359 = DIRECTION('',(0.,1.));+#17360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17361 = PCURVE('',#17362,#17367);+#17362 = PLANE('',#17363);+#17363 = AXIS2_PLACEMENT_3D('',#17364,#17365,#17366);+#17364 = CARTESIAN_POINT('',(4.606430027578,1.27,0.));+#17365 = DIRECTION('',(0.,0.,1.));+#17366 = DIRECTION('',(1.,0.,0.));+#17367 = DEFINITIONAL_REPRESENTATION('',(#17368),#17372);+#17368 = LINE('',#17369,#17370);+#17369 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#17370 = VECTOR('',#17371,1.);+#17371 = DIRECTION('',(1.,0.));+#17372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17373 = ORIENTED_EDGE('',*,*,#17374,.T.);+#17374 = EDGE_CURVE('',#17347,#17375,#17377,.T.);+#17375 = VERTEX_POINT('',#17376);+#17376 = CARTESIAN_POINT('',(4.363934772754,1.45,0.140014102897));+#17377 = SURFACE_CURVE('',#17378,(#17383,#17390),.PCURVE_S1.);+#17378 = CIRCLE('',#17379,0.28);+#17379 = AXIS2_PLACEMENT_3D('',#17380,#17381,#17382);+#17380 = CARTESIAN_POINT('',(4.606430027578,1.45,0.28));+#17381 = DIRECTION('',(0.,1.,0.));+#17382 = DIRECTION('',(0.,0.,1.));+#17383 = PCURVE('',#17025,#17384);+#17384 = DEFINITIONAL_REPRESENTATION('',(#17385),#17389);+#17385 = CIRCLE('',#17386,0.28);+#17386 = AXIS2_PLACEMENT_2D('',#17387,#17388);+#17387 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#17388 = DIRECTION('',(1.,0.));+#17389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17390 = PCURVE('',#17391,#17396);+#17391 = CYLINDRICAL_SURFACE('',#17392,0.28);+#17392 = AXIS2_PLACEMENT_3D('',#17393,#17394,#17395);+#17393 = CARTESIAN_POINT('',(4.606430027578,1.27,0.28));+#17394 = DIRECTION('',(0.,1.,0.));+#17395 = DIRECTION('',(0.,0.,1.));+#17396 = DEFINITIONAL_REPRESENTATION('',(#17397),#17401);+#17397 = LINE('',#17398,#17399);+#17398 = CARTESIAN_POINT('',(-0.,0.18));+#17399 = VECTOR('',#17400,1.);+#17400 = DIRECTION('',(1.,-0.));+#17401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17402 = ORIENTED_EDGE('',*,*,#17403,.F.);+#17403 = EDGE_CURVE('',#17404,#17375,#17406,.T.);+#17404 = VERTEX_POINT('',#17405);+#17405 = CARTESIAN_POINT('',(3.832854330943,1.45,1.059995970601));+#17406 = SURFACE_CURVE('',#17407,(#17411,#17418),.PCURVE_S1.);+#17407 = LINE('',#17408,#17409);+#17408 = CARTESIAN_POINT('',(3.780894551849,1.45,1.150005036749));+#17409 = VECTOR('',#17410,1.);+#17410 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17411 = PCURVE('',#17025,#17412);+#17412 = DEFINITIONAL_REPRESENTATION('',(#17413),#17417);+#17413 = LINE('',#17414,#17415);+#17414 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#17415 = VECTOR('',#17416,1.);+#17416 = DIRECTION('',(-0.866054481515,0.499949632511));+#17417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17418 = PCURVE('',#17419,#17424);+#17419 = PLANE('',#17420);+#17420 = AXIS2_PLACEMENT_3D('',#17421,#17422,#17423);+#17421 = CARTESIAN_POINT('',(3.832854330943,1.27,1.059995970601));+#17422 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#17423 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17424 = DEFINITIONAL_REPRESENTATION('',(#17425),#17429);+#17425 = LINE('',#17426,#17427);+#17426 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#17427 = VECTOR('',#17428,1.);+#17428 = DIRECTION('',(1.,0.));+#17429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17430 = ORIENTED_EDGE('',*,*,#17431,.F.);+#17431 = EDGE_CURVE('',#17432,#17404,#17434,.T.);+#17432 = VERTEX_POINT('',#17433);+#17433 = CARTESIAN_POINT('',(3.763569972422,1.45,1.1));+#17434 = SURFACE_CURVE('',#17435,(#17440,#17447),.PCURVE_S1.);+#17435 = CIRCLE('',#17436,8.E-02);+#17436 = AXIS2_PLACEMENT_3D('',#17437,#17438,#17439);+#17437 = CARTESIAN_POINT('',(3.763569972422,1.45,1.02));+#17438 = DIRECTION('',(0.,1.,0.));+#17439 = DIRECTION('',(0.,0.,1.));+#17440 = PCURVE('',#17025,#17441);+#17441 = DEFINITIONAL_REPRESENTATION('',(#17442),#17446);+#17442 = CIRCLE('',#17443,8.E-02);+#17443 = AXIS2_PLACEMENT_2D('',#17444,#17445);+#17444 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#17445 = DIRECTION('',(1.,0.));+#17446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17447 = PCURVE('',#17448,#17453);+#17448 = CYLINDRICAL_SURFACE('',#17449,8.E-02);+#17449 = AXIS2_PLACEMENT_3D('',#17450,#17451,#17452);+#17450 = CARTESIAN_POINT('',(3.763569972422,1.27,1.02));+#17451 = DIRECTION('',(0.,1.,0.));+#17452 = DIRECTION('',(0.,0.,1.));+#17453 = DEFINITIONAL_REPRESENTATION('',(#17454),#17458);+#17454 = LINE('',#17455,#17456);+#17455 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#17456 = VECTOR('',#17457,1.);+#17457 = DIRECTION('',(1.,-0.));+#17458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17459 = ORIENTED_EDGE('',*,*,#17460,.F.);+#17460 = EDGE_CURVE('',#17461,#17432,#17463,.T.);+#17461 = VERTEX_POINT('',#17462);+#17462 = CARTESIAN_POINT('',(3.4975,1.45,1.1));+#17463 = SURFACE_CURVE('',#17464,(#17468,#17475),.PCURVE_S1.);+#17464 = LINE('',#17465,#17466);+#17465 = CARTESIAN_POINT('',(3.4975,1.45,1.1));+#17466 = VECTOR('',#17467,1.);+#17467 = DIRECTION('',(1.,0.,0.));+#17468 = PCURVE('',#17025,#17469);+#17469 = DEFINITIONAL_REPRESENTATION('',(#17470),#17474);+#17470 = LINE('',#17471,#17472);+#17471 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#17472 = VECTOR('',#17473,1.);+#17473 = DIRECTION('',(0.,1.));+#17474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17475 = PCURVE('',#17476,#17481);+#17476 = PLANE('',#17477);+#17477 = AXIS2_PLACEMENT_3D('',#17478,#17479,#17480);+#17478 = CARTESIAN_POINT('',(3.4975,1.27,1.1));+#17479 = DIRECTION('',(0.,0.,1.));+#17480 = DIRECTION('',(1.,0.,0.));+#17481 = DEFINITIONAL_REPRESENTATION('',(#17482),#17486);+#17482 = LINE('',#17483,#17484);+#17483 = CARTESIAN_POINT('',(0.,0.18));+#17484 = VECTOR('',#17485,1.);+#17485 = DIRECTION('',(1.,0.));+#17486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17487 = ORIENTED_EDGE('',*,*,#17488,.F.);+#17488 = EDGE_CURVE('',#17489,#17461,#17491,.T.);+#17489 = VERTEX_POINT('',#17490);+#17490 = CARTESIAN_POINT('',(3.4475,1.45,1.113397459622));+#17491 = SURFACE_CURVE('',#17492,(#17497,#17508),.PCURVE_S1.);+#17492 = CIRCLE('',#17493,0.1);+#17493 = AXIS2_PLACEMENT_3D('',#17494,#17495,#17496);+#17494 = CARTESIAN_POINT('',(3.4975,1.45,1.2));+#17495 = DIRECTION('',(0.,-1.,0.));+#17496 = DIRECTION('',(1.,0.,0.));+#17497 = PCURVE('',#17025,#17498);+#17498 = DEFINITIONAL_REPRESENTATION('',(#17499),#17507);+#17499 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17500,#17501,#17502,#17503+ ,#17504,#17505,#17506),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17500 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17501 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#17502 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#17503 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#17504 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#17505 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#17506 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17508 = PCURVE('',#17509,#17514);+#17509 = CYLINDRICAL_SURFACE('',#17510,0.1);+#17510 = AXIS2_PLACEMENT_3D('',#17511,#17512,#17513);+#17511 = CARTESIAN_POINT('',(3.4975,1.27,1.2));+#17512 = DIRECTION('',(0.,1.,0.));+#17513 = DIRECTION('',(1.,0.,0.));+#17514 = DEFINITIONAL_REPRESENTATION('',(#17515),#17519);+#17515 = LINE('',#17516,#17517);+#17516 = CARTESIAN_POINT('',(6.28318530718,0.18));+#17517 = VECTOR('',#17518,1.);+#17518 = DIRECTION('',(-1.,-0.));+#17519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17520 = ORIENTED_EDGE('',*,*,#17521,.F.);+#17521 = EDGE_CURVE('',#17004,#17489,#17522,.T.);+#17522 = SURFACE_CURVE('',#17523,(#17527,#17534),.PCURVE_S1.);+#17523 = LINE('',#17524,#17525);+#17524 = CARTESIAN_POINT('',(3.4475,1.45,1.223081297441E-02));+#17525 = VECTOR('',#17526,1.);+#17526 = DIRECTION('',(0.,0.,-1.));+#17527 = PCURVE('',#17025,#17528);+#17528 = DEFINITIONAL_REPRESENTATION('',(#17529),#17533);+#17529 = LINE('',#17530,#17531);+#17530 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#17531 = VECTOR('',#17532,1.);+#17532 = DIRECTION('',(-1.,0.));+#17533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17534 = PCURVE('',#17057,#17535);+#17535 = DEFINITIONAL_REPRESENTATION('',(#17536),#17540);+#17536 = LINE('',#17537,#17538);+#17537 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#17538 = VECTOR('',#17539,1.);+#17539 = DIRECTION('',(-1.,0.));+#17540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17541 = ADVANCED_FACE('',(#17542),#17057,.F.);+#17542 = FACE_BOUND('',#17543,.F.);+#17543 = EDGE_LOOP('',(#17544,#17545,#17568,#17589));+#17544 = ORIENTED_EDGE('',*,*,#17041,.F.);+#17545 = ORIENTED_EDGE('',*,*,#17546,.T.);+#17546 = EDGE_CURVE('',#17042,#17547,#17549,.T.);+#17547 = VERTEX_POINT('',#17548);+#17548 = CARTESIAN_POINT('',(3.4475,1.09,1.113397459622));+#17549 = SURFACE_CURVE('',#17550,(#17554,#17561),.PCURVE_S1.);+#17550 = LINE('',#17551,#17552);+#17551 = CARTESIAN_POINT('',(3.4475,1.09,1.223081297441E-02));+#17552 = VECTOR('',#17553,1.);+#17553 = DIRECTION('',(0.,0.,-1.));+#17554 = PCURVE('',#17057,#17555);+#17555 = DEFINITIONAL_REPRESENTATION('',(#17556),#17560);+#17556 = LINE('',#17557,#17558);+#17557 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#17558 = VECTOR('',#17559,1.);+#17559 = DIRECTION('',(-1.,0.));+#17560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17561 = PCURVE('',#17086,#17562);+#17562 = DEFINITIONAL_REPRESENTATION('',(#17563),#17567);+#17563 = LINE('',#17564,#17565);+#17564 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#17565 = VECTOR('',#17566,1.);+#17566 = DIRECTION('',(-1.,0.));+#17567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17568 = ORIENTED_EDGE('',*,*,#17569,.T.);+#17569 = EDGE_CURVE('',#17547,#17489,#17570,.T.);+#17570 = SURFACE_CURVE('',#17571,(#17575,#17582),.PCURVE_S1.);+#17571 = LINE('',#17572,#17573);+#17572 = CARTESIAN_POINT('',(3.4475,1.27,1.113397459622));+#17573 = VECTOR('',#17574,1.);+#17574 = DIRECTION('',(0.,1.,0.));+#17575 = PCURVE('',#17057,#17576);+#17576 = DEFINITIONAL_REPRESENTATION('',(#17577),#17581);+#17577 = LINE('',#17578,#17579);+#17578 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#17579 = VECTOR('',#17580,1.);+#17580 = DIRECTION('',(0.,-1.));+#17581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17582 = PCURVE('',#17509,#17583);+#17583 = DEFINITIONAL_REPRESENTATION('',(#17584),#17588);+#17584 = LINE('',#17585,#17586);+#17585 = CARTESIAN_POINT('',(2.094395102394,0.));+#17586 = VECTOR('',#17587,1.);+#17587 = DIRECTION('',(-0.,1.));+#17588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17589 = ORIENTED_EDGE('',*,*,#17521,.F.);+#17590 = ADVANCED_FACE('',(#17591),#17086,.F.);+#17591 = FACE_BOUND('',#17592,.F.);+#17592 = EDGE_LOOP('',(#17593,#17594,#17595,#17619,#17642,#17666,#17689,+ #17712,#17735,#17759,#17782,#17806,#17829,#17855));+#17593 = ORIENTED_EDGE('',*,*,#17069,.F.);+#17594 = ORIENTED_EDGE('',*,*,#17132,.T.);+#17595 = ORIENTED_EDGE('',*,*,#17596,.T.);+#17596 = EDGE_CURVE('',#17133,#17597,#17599,.T.);+#17597 = VERTEX_POINT('',#17598);+#17598 = CARTESIAN_POINT('',(4.006065227246,1.09,1.159985897103));+#17599 = SURFACE_CURVE('',#17600,(#17605,#17612),.PCURVE_S1.);+#17600 = CIRCLE('',#17601,0.28);+#17601 = AXIS2_PLACEMENT_3D('',#17602,#17603,#17604);+#17602 = CARTESIAN_POINT('',(3.763569972422,1.09,1.02));+#17603 = DIRECTION('',(0.,1.,0.));+#17604 = DIRECTION('',(0.,0.,1.));+#17605 = PCURVE('',#17086,#17606);+#17606 = DEFINITIONAL_REPRESENTATION('',(#17607),#17611);+#17607 = CIRCLE('',#17608,0.28);+#17608 = AXIS2_PLACEMENT_2D('',#17609,#17610);+#17609 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#17610 = DIRECTION('',(1.,0.));+#17611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17612 = PCURVE('',#17171,#17613);+#17613 = DEFINITIONAL_REPRESENTATION('',(#17614),#17618);+#17614 = LINE('',#17615,#17616);+#17615 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#17616 = VECTOR('',#17617,1.);+#17617 = DIRECTION('',(1.,0.));+#17618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17619 = ORIENTED_EDGE('',*,*,#17620,.T.);+#17620 = EDGE_CURVE('',#17597,#17621,#17623,.T.);+#17621 = VERTEX_POINT('',#17622);+#17622 = CARTESIAN_POINT('',(4.537145669057,1.09,0.240004029399));+#17623 = SURFACE_CURVE('',#17624,(#17628,#17635),.PCURVE_S1.);+#17624 = LINE('',#17625,#17626);+#17625 = CARTESIAN_POINT('',(3.954105448151,1.09,1.249994963251));+#17626 = VECTOR('',#17627,1.);+#17627 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17628 = PCURVE('',#17086,#17629);+#17629 = DEFINITIONAL_REPRESENTATION('',(#17630),#17634);+#17630 = LINE('',#17631,#17632);+#17631 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#17632 = VECTOR('',#17633,1.);+#17633 = DIRECTION('',(-0.866054481515,0.499949632511));+#17634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17635 = PCURVE('',#17249,#17636);+#17636 = DEFINITIONAL_REPRESENTATION('',(#17637),#17641);+#17637 = LINE('',#17638,#17639);+#17638 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#17639 = VECTOR('',#17640,1.);+#17640 = DIRECTION('',(1.,0.));+#17641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17642 = ORIENTED_EDGE('',*,*,#17643,.F.);+#17643 = EDGE_CURVE('',#17644,#17621,#17646,.T.);+#17644 = VERTEX_POINT('',#17645);+#17645 = CARTESIAN_POINT('',(4.606430027578,1.09,0.2));+#17646 = SURFACE_CURVE('',#17647,(#17652,#17659),.PCURVE_S1.);+#17647 = CIRCLE('',#17648,8.E-02);+#17648 = AXIS2_PLACEMENT_3D('',#17649,#17650,#17651);+#17649 = CARTESIAN_POINT('',(4.606430027578,1.09,0.28));+#17650 = DIRECTION('',(0.,1.,0.));+#17651 = DIRECTION('',(0.,0.,1.));+#17652 = PCURVE('',#17086,#17653);+#17653 = DEFINITIONAL_REPRESENTATION('',(#17654),#17658);+#17654 = CIRCLE('',#17655,8.E-02);+#17655 = AXIS2_PLACEMENT_2D('',#17656,#17657);+#17656 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#17657 = DIRECTION('',(1.,0.));+#17658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17659 = PCURVE('',#17278,#17660);+#17660 = DEFINITIONAL_REPRESENTATION('',(#17661),#17665);+#17661 = LINE('',#17662,#17663);+#17662 = CARTESIAN_POINT('',(0.,-0.18));+#17663 = VECTOR('',#17664,1.);+#17664 = DIRECTION('',(1.,0.));+#17665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17666 = ORIENTED_EDGE('',*,*,#17667,.T.);+#17667 = EDGE_CURVE('',#17644,#17668,#17670,.T.);+#17668 = VERTEX_POINT('',#17669);+#17669 = CARTESIAN_POINT('',(5.255,1.09,0.2));+#17670 = SURFACE_CURVE('',#17671,(#17675,#17682),.PCURVE_S1.);+#17671 = LINE('',#17672,#17673);+#17672 = CARTESIAN_POINT('',(4.5025,1.09,0.2));+#17673 = VECTOR('',#17674,1.);+#17674 = DIRECTION('',(1.,0.,0.));+#17675 = PCURVE('',#17086,#17676);+#17676 = DEFINITIONAL_REPRESENTATION('',(#17677),#17681);+#17677 = LINE('',#17678,#17679);+#17678 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#17679 = VECTOR('',#17680,1.);+#17680 = DIRECTION('',(0.,1.));+#17681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17682 = PCURVE('',#17306,#17683);+#17683 = DEFINITIONAL_REPRESENTATION('',(#17684),#17688);+#17684 = LINE('',#17685,#17686);+#17685 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#17686 = VECTOR('',#17687,1.);+#17687 = DIRECTION('',(1.,0.));+#17688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17689 = ORIENTED_EDGE('',*,*,#17690,.T.);+#17690 = EDGE_CURVE('',#17668,#17691,#17693,.T.);+#17691 = VERTEX_POINT('',#17692);+#17692 = CARTESIAN_POINT('',(5.255,1.09,0.));+#17693 = SURFACE_CURVE('',#17694,(#17698,#17705),.PCURVE_S1.);+#17694 = LINE('',#17695,#17696);+#17695 = CARTESIAN_POINT('',(5.255,1.09,1.223081297441E-02));+#17696 = VECTOR('',#17697,1.);+#17697 = DIRECTION('',(0.,0.,-1.));+#17698 = PCURVE('',#17086,#17699);+#17699 = DEFINITIONAL_REPRESENTATION('',(#17700),#17704);+#17700 = LINE('',#17701,#17702);+#17701 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#17702 = VECTOR('',#17703,1.);+#17703 = DIRECTION('',(-1.,0.));+#17704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17705 = PCURVE('',#17334,#17706);+#17706 = DEFINITIONAL_REPRESENTATION('',(#17707),#17711);+#17707 = LINE('',#17708,#17709);+#17708 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#17709 = VECTOR('',#17710,1.);+#17710 = DIRECTION('',(-1.,0.));+#17711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17712 = ORIENTED_EDGE('',*,*,#17713,.F.);+#17713 = EDGE_CURVE('',#17714,#17691,#17716,.T.);+#17714 = VERTEX_POINT('',#17715);+#17715 = CARTESIAN_POINT('',(4.606430027578,1.09,-5.551115123126E-17));+#17716 = SURFACE_CURVE('',#17717,(#17721,#17728),.PCURVE_S1.);+#17717 = LINE('',#17718,#17719);+#17718 = CARTESIAN_POINT('',(4.5025,1.09,0.));+#17719 = VECTOR('',#17720,1.);+#17720 = DIRECTION('',(1.,0.,0.));+#17721 = PCURVE('',#17086,#17722);+#17722 = DEFINITIONAL_REPRESENTATION('',(#17723),#17727);+#17723 = LINE('',#17724,#17725);+#17724 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#17725 = VECTOR('',#17726,1.);+#17726 = DIRECTION('',(0.,1.));+#17727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17728 = PCURVE('',#17362,#17729);+#17729 = DEFINITIONAL_REPRESENTATION('',(#17730),#17734);+#17730 = LINE('',#17731,#17732);+#17731 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#17732 = VECTOR('',#17733,1.);+#17733 = DIRECTION('',(1.,0.));+#17734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17735 = ORIENTED_EDGE('',*,*,#17736,.T.);+#17736 = EDGE_CURVE('',#17714,#17737,#17739,.T.);+#17737 = VERTEX_POINT('',#17738);+#17738 = CARTESIAN_POINT('',(4.363934772754,1.09,0.140014102897));+#17739 = SURFACE_CURVE('',#17740,(#17745,#17752),.PCURVE_S1.);+#17740 = CIRCLE('',#17741,0.28);+#17741 = AXIS2_PLACEMENT_3D('',#17742,#17743,#17744);+#17742 = CARTESIAN_POINT('',(4.606430027578,1.09,0.28));+#17743 = DIRECTION('',(0.,1.,0.));+#17744 = DIRECTION('',(0.,0.,1.));+#17745 = PCURVE('',#17086,#17746);+#17746 = DEFINITIONAL_REPRESENTATION('',(#17747),#17751);+#17747 = CIRCLE('',#17748,0.28);+#17748 = AXIS2_PLACEMENT_2D('',#17749,#17750);+#17749 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#17750 = DIRECTION('',(1.,0.));+#17751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17752 = PCURVE('',#17391,#17753);+#17753 = DEFINITIONAL_REPRESENTATION('',(#17754),#17758);+#17754 = LINE('',#17755,#17756);+#17755 = CARTESIAN_POINT('',(0.,-0.18));+#17756 = VECTOR('',#17757,1.);+#17757 = DIRECTION('',(1.,0.));+#17758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17759 = ORIENTED_EDGE('',*,*,#17760,.F.);+#17760 = EDGE_CURVE('',#17761,#17737,#17763,.T.);+#17761 = VERTEX_POINT('',#17762);+#17762 = CARTESIAN_POINT('',(3.832854330943,1.09,1.059995970601));+#17763 = SURFACE_CURVE('',#17764,(#17768,#17775),.PCURVE_S1.);+#17764 = LINE('',#17765,#17766);+#17765 = CARTESIAN_POINT('',(3.780894551849,1.09,1.150005036749));+#17766 = VECTOR('',#17767,1.);+#17767 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#17768 = PCURVE('',#17086,#17769);+#17769 = DEFINITIONAL_REPRESENTATION('',(#17770),#17774);+#17770 = LINE('',#17771,#17772);+#17771 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#17772 = VECTOR('',#17773,1.);+#17773 = DIRECTION('',(-0.866054481515,0.499949632511));+#17774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17775 = PCURVE('',#17419,#17776);+#17776 = DEFINITIONAL_REPRESENTATION('',(#17777),#17781);+#17777 = LINE('',#17778,#17779);+#17778 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#17779 = VECTOR('',#17780,1.);+#17780 = DIRECTION('',(1.,0.));+#17781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17782 = ORIENTED_EDGE('',*,*,#17783,.F.);+#17783 = EDGE_CURVE('',#17784,#17761,#17786,.T.);+#17784 = VERTEX_POINT('',#17785);+#17785 = CARTESIAN_POINT('',(3.763569972422,1.09,1.1));+#17786 = SURFACE_CURVE('',#17787,(#17792,#17799),.PCURVE_S1.);+#17787 = CIRCLE('',#17788,8.E-02);+#17788 = AXIS2_PLACEMENT_3D('',#17789,#17790,#17791);+#17789 = CARTESIAN_POINT('',(3.763569972422,1.09,1.02));+#17790 = DIRECTION('',(0.,1.,0.));+#17791 = DIRECTION('',(0.,0.,1.));+#17792 = PCURVE('',#17086,#17793);+#17793 = DEFINITIONAL_REPRESENTATION('',(#17794),#17798);+#17794 = CIRCLE('',#17795,8.E-02);+#17795 = AXIS2_PLACEMENT_2D('',#17796,#17797);+#17796 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#17797 = DIRECTION('',(1.,0.));+#17798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17799 = PCURVE('',#17448,#17800);+#17800 = DEFINITIONAL_REPRESENTATION('',(#17801),#17805);+#17801 = LINE('',#17802,#17803);+#17802 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#17803 = VECTOR('',#17804,1.);+#17804 = DIRECTION('',(1.,0.));+#17805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17806 = ORIENTED_EDGE('',*,*,#17807,.F.);+#17807 = EDGE_CURVE('',#17808,#17784,#17810,.T.);+#17808 = VERTEX_POINT('',#17809);+#17809 = CARTESIAN_POINT('',(3.4975,1.09,1.1));+#17810 = SURFACE_CURVE('',#17811,(#17815,#17822),.PCURVE_S1.);+#17811 = LINE('',#17812,#17813);+#17812 = CARTESIAN_POINT('',(3.4975,1.09,1.1));+#17813 = VECTOR('',#17814,1.);+#17814 = DIRECTION('',(1.,0.,0.));+#17815 = PCURVE('',#17086,#17816);+#17816 = DEFINITIONAL_REPRESENTATION('',(#17817),#17821);+#17817 = LINE('',#17818,#17819);+#17818 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#17819 = VECTOR('',#17820,1.);+#17820 = DIRECTION('',(0.,1.));+#17821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17822 = PCURVE('',#17476,#17823);+#17823 = DEFINITIONAL_REPRESENTATION('',(#17824),#17828);+#17824 = LINE('',#17825,#17826);+#17825 = CARTESIAN_POINT('',(0.,-0.18));+#17826 = VECTOR('',#17827,1.);+#17827 = DIRECTION('',(1.,0.));+#17828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17829 = ORIENTED_EDGE('',*,*,#17830,.F.);+#17830 = EDGE_CURVE('',#17547,#17808,#17831,.T.);+#17831 = SURFACE_CURVE('',#17832,(#17837,#17848),.PCURVE_S1.);+#17832 = CIRCLE('',#17833,0.1);+#17833 = AXIS2_PLACEMENT_3D('',#17834,#17835,#17836);+#17834 = CARTESIAN_POINT('',(3.4975,1.09,1.2));+#17835 = DIRECTION('',(0.,-1.,0.));+#17836 = DIRECTION('',(1.,0.,0.));+#17837 = PCURVE('',#17086,#17838);+#17838 = DEFINITIONAL_REPRESENTATION('',(#17839),#17847);+#17839 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17840,#17841,#17842,#17843+ ,#17844,#17845,#17846),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17840 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17841 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#17842 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#17843 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#17844 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#17845 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#17846 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#17847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17848 = PCURVE('',#17509,#17849);+#17849 = DEFINITIONAL_REPRESENTATION('',(#17850),#17854);+#17850 = LINE('',#17851,#17852);+#17851 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#17852 = VECTOR('',#17853,1.);+#17853 = DIRECTION('',(-1.,0.));+#17854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17855 = ORIENTED_EDGE('',*,*,#17546,.F.);+#17856 = ADVANCED_FACE('',(#17857),#17171,.T.);+#17857 = FACE_BOUND('',#17858,.T.);+#17858 = EDGE_LOOP('',(#17859,#17860,#17861,#17882));+#17859 = ORIENTED_EDGE('',*,*,#17155,.F.);+#17860 = ORIENTED_EDGE('',*,*,#17596,.T.);+#17861 = ORIENTED_EDGE('',*,*,#17862,.T.);+#17862 = EDGE_CURVE('',#17597,#17210,#17863,.T.);+#17863 = SURFACE_CURVE('',#17864,(#17868,#17875),.PCURVE_S1.);+#17864 = LINE('',#17865,#17866);+#17865 = CARTESIAN_POINT('',(4.006065227246,1.09,1.159985897103));+#17866 = VECTOR('',#17867,1.);+#17867 = DIRECTION('',(0.,1.,0.));+#17868 = PCURVE('',#17171,#17869);+#17869 = DEFINITIONAL_REPRESENTATION('',(#17870),#17874);+#17870 = LINE('',#17871,#17872);+#17871 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#17872 = VECTOR('',#17873,1.);+#17873 = DIRECTION('',(-0.,1.));+#17874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17875 = PCURVE('',#17249,#17876);+#17876 = DEFINITIONAL_REPRESENTATION('',(#17877),#17881);+#17877 = LINE('',#17878,#17879);+#17878 = CARTESIAN_POINT('',(0.,-0.18));+#17879 = VECTOR('',#17880,1.);+#17880 = DIRECTION('',(0.,1.));+#17881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17882 = ORIENTED_EDGE('',*,*,#17209,.F.);+#17883 = ADVANCED_FACE('',(#17884),#17509,.T.);+#17884 = FACE_BOUND('',#17885,.T.);+#17885 = EDGE_LOOP('',(#17886,#17887,#17908,#17909));+#17886 = ORIENTED_EDGE('',*,*,#17488,.T.);+#17887 = ORIENTED_EDGE('',*,*,#17888,.T.);+#17888 = EDGE_CURVE('',#17461,#17808,#17889,.T.);+#17889 = SURFACE_CURVE('',#17890,(#17894,#17901),.PCURVE_S1.);+#17890 = LINE('',#17891,#17892);+#17891 = CARTESIAN_POINT('',(3.4975,1.45,1.1));+#17892 = VECTOR('',#17893,1.);+#17893 = DIRECTION('',(0.,-1.,0.));+#17894 = PCURVE('',#17509,#17895);+#17895 = DEFINITIONAL_REPRESENTATION('',(#17896),#17900);+#17896 = LINE('',#17897,#17898);+#17897 = CARTESIAN_POINT('',(1.570796326795,0.18));+#17898 = VECTOR('',#17899,1.);+#17899 = DIRECTION('',(-0.,-1.));+#17900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17901 = PCURVE('',#17476,#17902);+#17902 = DEFINITIONAL_REPRESENTATION('',(#17903),#17907);+#17903 = LINE('',#17904,#17905);+#17904 = CARTESIAN_POINT('',(0.,0.18));+#17905 = VECTOR('',#17906,1.);+#17906 = DIRECTION('',(0.,-1.));+#17907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17908 = ORIENTED_EDGE('',*,*,#17830,.F.);+#17909 = ORIENTED_EDGE('',*,*,#17569,.T.);+#17910 = ADVANCED_FACE('',(#17911),#17476,.F.);+#17911 = FACE_BOUND('',#17912,.F.);+#17912 = EDGE_LOOP('',(#17913,#17914,#17935,#17936));+#17913 = ORIENTED_EDGE('',*,*,#17807,.T.);+#17914 = ORIENTED_EDGE('',*,*,#17915,.F.);+#17915 = EDGE_CURVE('',#17432,#17784,#17916,.T.);+#17916 = SURFACE_CURVE('',#17917,(#17921,#17928),.PCURVE_S1.);+#17917 = LINE('',#17918,#17919);+#17918 = CARTESIAN_POINT('',(3.763569972422,1.45,1.1));+#17919 = VECTOR('',#17920,1.);+#17920 = DIRECTION('',(0.,-1.,0.));+#17921 = PCURVE('',#17476,#17922);+#17922 = DEFINITIONAL_REPRESENTATION('',(#17923),#17927);+#17923 = LINE('',#17924,#17925);+#17924 = CARTESIAN_POINT('',(0.266069972422,0.18));+#17925 = VECTOR('',#17926,1.);+#17926 = DIRECTION('',(0.,-1.));+#17927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17928 = PCURVE('',#17448,#17929);+#17929 = DEFINITIONAL_REPRESENTATION('',(#17930),#17934);+#17930 = LINE('',#17931,#17932);+#17931 = CARTESIAN_POINT('',(0.,0.18));+#17932 = VECTOR('',#17933,1.);+#17933 = DIRECTION('',(0.,-1.));+#17934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17935 = ORIENTED_EDGE('',*,*,#17460,.F.);+#17936 = ORIENTED_EDGE('',*,*,#17888,.T.);+#17937 = ADVANCED_FACE('',(#17938),#17448,.F.);+#17938 = FACE_BOUND('',#17939,.F.);+#17939 = EDGE_LOOP('',(#17940,#17941,#17962,#17963));+#17940 = ORIENTED_EDGE('',*,*,#17783,.T.);+#17941 = ORIENTED_EDGE('',*,*,#17942,.F.);+#17942 = EDGE_CURVE('',#17404,#17761,#17943,.T.);+#17943 = SURFACE_CURVE('',#17944,(#17948,#17955),.PCURVE_S1.);+#17944 = LINE('',#17945,#17946);+#17945 = CARTESIAN_POINT('',(3.832854330943,1.45,1.059995970601));+#17946 = VECTOR('',#17947,1.);+#17947 = DIRECTION('',(0.,-1.,0.));+#17948 = PCURVE('',#17448,#17949);+#17949 = DEFINITIONAL_REPRESENTATION('',(#17950),#17954);+#17950 = LINE('',#17951,#17952);+#17951 = CARTESIAN_POINT('',(1.047255709587,0.18));+#17952 = VECTOR('',#17953,1.);+#17953 = DIRECTION('',(0.,-1.));+#17954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17955 = PCURVE('',#17419,#17956);+#17956 = DEFINITIONAL_REPRESENTATION('',(#17957),#17961);+#17957 = LINE('',#17958,#17959);+#17958 = CARTESIAN_POINT('',(0.,0.18));+#17959 = VECTOR('',#17960,1.);+#17960 = DIRECTION('',(0.,-1.));+#17961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17962 = ORIENTED_EDGE('',*,*,#17431,.F.);+#17963 = ORIENTED_EDGE('',*,*,#17915,.T.);+#17964 = ADVANCED_FACE('',(#17965),#17419,.F.);+#17965 = FACE_BOUND('',#17966,.F.);+#17966 = EDGE_LOOP('',(#17967,#17968,#17989,#17990));+#17967 = ORIENTED_EDGE('',*,*,#17760,.T.);+#17968 = ORIENTED_EDGE('',*,*,#17969,.F.);+#17969 = EDGE_CURVE('',#17375,#17737,#17970,.T.);+#17970 = SURFACE_CURVE('',#17971,(#17975,#17982),.PCURVE_S1.);+#17971 = LINE('',#17972,#17973);+#17972 = CARTESIAN_POINT('',(4.363934772754,1.45,0.140014102897));+#17973 = VECTOR('',#17974,1.);+#17974 = DIRECTION('',(0.,-1.,0.));+#17975 = PCURVE('',#17419,#17976);+#17976 = DEFINITIONAL_REPRESENTATION('',(#17977),#17981);+#17977 = LINE('',#17978,#17979);+#17978 = CARTESIAN_POINT('',(1.062267891155,0.18));+#17979 = VECTOR('',#17980,1.);+#17980 = DIRECTION('',(0.,-1.));+#17981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17982 = PCURVE('',#17391,#17983);+#17983 = DEFINITIONAL_REPRESENTATION('',(#17984),#17988);+#17984 = LINE('',#17985,#17986);+#17985 = CARTESIAN_POINT('',(4.188848363177,0.18));+#17986 = VECTOR('',#17987,1.);+#17987 = DIRECTION('',(0.,-1.));+#17988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17989 = ORIENTED_EDGE('',*,*,#17403,.F.);+#17990 = ORIENTED_EDGE('',*,*,#17942,.T.);+#17991 = ADVANCED_FACE('',(#17992),#17391,.T.);+#17992 = FACE_BOUND('',#17993,.T.);+#17993 = EDGE_LOOP('',(#17994,#17995,#17996,#17997));+#17994 = ORIENTED_EDGE('',*,*,#17736,.T.);+#17995 = ORIENTED_EDGE('',*,*,#17969,.F.);+#17996 = ORIENTED_EDGE('',*,*,#17374,.F.);+#17997 = ORIENTED_EDGE('',*,*,#17998,.T.);+#17998 = EDGE_CURVE('',#17347,#17714,#17999,.T.);+#17999 = SURFACE_CURVE('',#18000,(#18004,#18011),.PCURVE_S1.);+#18000 = LINE('',#18001,#18002);+#18001 = CARTESIAN_POINT('',(4.606430027578,1.45,-5.551115123126E-17));+#18002 = VECTOR('',#18003,1.);+#18003 = DIRECTION('',(0.,-1.,0.));+#18004 = PCURVE('',#17391,#18005);+#18005 = DEFINITIONAL_REPRESENTATION('',(#18006),#18010);+#18006 = LINE('',#18007,#18008);+#18007 = CARTESIAN_POINT('',(3.14159265359,0.18));+#18008 = VECTOR('',#18009,1.);+#18009 = DIRECTION('',(0.,-1.));+#18010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18011 = PCURVE('',#17362,#18012);+#18012 = DEFINITIONAL_REPRESENTATION('',(#18013),#18017);+#18013 = LINE('',#18014,#18015);+#18014 = CARTESIAN_POINT('',(0.,0.18));+#18015 = VECTOR('',#18016,1.);+#18016 = DIRECTION('',(0.,-1.));+#18017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18018 = ADVANCED_FACE('',(#18019),#17362,.F.);+#18019 = FACE_BOUND('',#18020,.F.);+#18020 = EDGE_LOOP('',(#18021,#18022,#18023,#18044));+#18021 = ORIENTED_EDGE('',*,*,#17998,.T.);+#18022 = ORIENTED_EDGE('',*,*,#17713,.T.);+#18023 = ORIENTED_EDGE('',*,*,#18024,.T.);+#18024 = EDGE_CURVE('',#17691,#17319,#18025,.T.);+#18025 = SURFACE_CURVE('',#18026,(#18030,#18037),.PCURVE_S1.);+#18026 = LINE('',#18027,#18028);+#18027 = CARTESIAN_POINT('',(5.255,0.93,0.));+#18028 = VECTOR('',#18029,1.);+#18029 = DIRECTION('',(0.,1.,0.));+#18030 = PCURVE('',#17362,#18031);+#18031 = DEFINITIONAL_REPRESENTATION('',(#18032),#18036);+#18032 = LINE('',#18033,#18034);+#18033 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#18034 = VECTOR('',#18035,1.);+#18035 = DIRECTION('',(0.,1.));+#18036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18037 = PCURVE('',#17334,#18038);+#18038 = DEFINITIONAL_REPRESENTATION('',(#18039),#18043);+#18039 = LINE('',#18040,#18041);+#18040 = CARTESIAN_POINT('',(0.5,-0.34));+#18041 = VECTOR('',#18042,1.);+#18042 = DIRECTION('',(0.,-1.));+#18043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18044 = ORIENTED_EDGE('',*,*,#17346,.F.);+#18045 = ADVANCED_FACE('',(#18046),#17334,.T.);+#18046 = FACE_BOUND('',#18047,.T.);+#18047 = EDGE_LOOP('',(#18048,#18069,#18070,#18071));+#18048 = ORIENTED_EDGE('',*,*,#18049,.F.);+#18049 = EDGE_CURVE('',#17668,#17291,#18050,.T.);+#18050 = SURFACE_CURVE('',#18051,(#18055,#18062),.PCURVE_S1.);+#18051 = LINE('',#18052,#18053);+#18052 = CARTESIAN_POINT('',(5.255,0.93,0.2));+#18053 = VECTOR('',#18054,1.);+#18054 = DIRECTION('',(0.,1.,0.));+#18055 = PCURVE('',#17334,#18056);+#18056 = DEFINITIONAL_REPRESENTATION('',(#18057),#18061);+#18057 = LINE('',#18058,#18059);+#18058 = CARTESIAN_POINT('',(0.7,-0.34));+#18059 = VECTOR('',#18060,1.);+#18060 = DIRECTION('',(0.,-1.));+#18061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18062 = PCURVE('',#17306,#18063);+#18063 = DEFINITIONAL_REPRESENTATION('',(#18064),#18068);+#18064 = LINE('',#18065,#18066);+#18065 = CARTESIAN_POINT('',(0.648569972422,-0.34));+#18066 = VECTOR('',#18067,1.);+#18067 = DIRECTION('',(0.,1.));+#18068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18069 = ORIENTED_EDGE('',*,*,#17690,.T.);+#18070 = ORIENTED_EDGE('',*,*,#18024,.T.);+#18071 = ORIENTED_EDGE('',*,*,#17318,.F.);+#18072 = ADVANCED_FACE('',(#18073),#17306,.T.);+#18073 = FACE_BOUND('',#18074,.T.);+#18074 = EDGE_LOOP('',(#18075,#18096,#18097,#18098));+#18075 = ORIENTED_EDGE('',*,*,#18076,.T.);+#18076 = EDGE_CURVE('',#17262,#17644,#18077,.T.);+#18077 = SURFACE_CURVE('',#18078,(#18082,#18089),.PCURVE_S1.);+#18078 = LINE('',#18079,#18080);+#18079 = CARTESIAN_POINT('',(4.606430027578,1.45,0.2));+#18080 = VECTOR('',#18081,1.);+#18081 = DIRECTION('',(0.,-1.,0.));+#18082 = PCURVE('',#17306,#18083);+#18083 = DEFINITIONAL_REPRESENTATION('',(#18084),#18088);+#18084 = LINE('',#18085,#18086);+#18085 = CARTESIAN_POINT('',(0.,0.18));+#18086 = VECTOR('',#18087,1.);+#18087 = DIRECTION('',(0.,-1.));+#18088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18089 = PCURVE('',#17278,#18090);+#18090 = DEFINITIONAL_REPRESENTATION('',(#18091),#18095);+#18091 = LINE('',#18092,#18093);+#18092 = CARTESIAN_POINT('',(3.14159265359,0.18));+#18093 = VECTOR('',#18094,1.);+#18094 = DIRECTION('',(0.,-1.));+#18095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18096 = ORIENTED_EDGE('',*,*,#17667,.T.);+#18097 = ORIENTED_EDGE('',*,*,#18049,.T.);+#18098 = ORIENTED_EDGE('',*,*,#17290,.F.);+#18099 = ADVANCED_FACE('',(#18100),#17278,.F.);+#18100 = FACE_BOUND('',#18101,.F.);+#18101 = EDGE_LOOP('',(#18102,#18103,#18124,#18125));+#18102 = ORIENTED_EDGE('',*,*,#17643,.T.);+#18103 = ORIENTED_EDGE('',*,*,#18104,.F.);+#18104 = EDGE_CURVE('',#17234,#17621,#18105,.T.);+#18105 = SURFACE_CURVE('',#18106,(#18110,#18117),.PCURVE_S1.);+#18106 = LINE('',#18107,#18108);+#18107 = CARTESIAN_POINT('',(4.537145669057,1.45,0.240004029399));+#18108 = VECTOR('',#18109,1.);+#18109 = DIRECTION('',(0.,-1.,0.));+#18110 = PCURVE('',#17278,#18111);+#18111 = DEFINITIONAL_REPRESENTATION('',(#18112),#18116);+#18112 = LINE('',#18113,#18114);+#18113 = CARTESIAN_POINT('',(4.188848363177,0.18));+#18114 = VECTOR('',#18115,1.);+#18115 = DIRECTION('',(0.,-1.));+#18116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18117 = PCURVE('',#17249,#18118);+#18118 = DEFINITIONAL_REPRESENTATION('',(#18119),#18123);+#18119 = LINE('',#18120,#18121);+#18120 = CARTESIAN_POINT('',(1.062267891155,0.18));+#18121 = VECTOR('',#18122,1.);+#18122 = DIRECTION('',(0.,-1.));+#18123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18124 = ORIENTED_EDGE('',*,*,#17261,.F.);+#18125 = ORIENTED_EDGE('',*,*,#18076,.T.);+#18126 = ADVANCED_FACE('',(#18127),#17249,.T.);+#18127 = FACE_BOUND('',#18128,.T.);+#18128 = EDGE_LOOP('',(#18129,#18130,#18131,#18132));+#18129 = ORIENTED_EDGE('',*,*,#17862,.F.);+#18130 = ORIENTED_EDGE('',*,*,#17620,.T.);+#18131 = ORIENTED_EDGE('',*,*,#18104,.F.);+#18132 = ORIENTED_EDGE('',*,*,#17233,.F.);+#18133 = MANIFOLD_SOLID_BREP('',#18134);+#18134 = CLOSED_SHELL('',(#18135,#18265,#18341,#18679,#18728,#18994,+ #19021,#19048,#19075,#19102,#19129,#19156,#19183,#19210,#19237,+ #19264));+#18135 = ADVANCED_FACE('',(#18136),#18151,.T.);+#18136 = FACE_BOUND('',#18137,.T.);+#18137 = EDGE_LOOP('',(#18138,#18178,#18206,#18239));+#18138 = ORIENTED_EDGE('',*,*,#18139,.T.);+#18139 = EDGE_CURVE('',#18140,#18142,#18144,.T.);+#18140 = VERTEX_POINT('',#18141);+#18141 = CARTESIAN_POINT('',(3.4975,2.72,1.3));+#18142 = VERTEX_POINT('',#18143);+#18143 = CARTESIAN_POINT('',(3.4475,2.72,1.286602540378));+#18144 = SURFACE_CURVE('',#18145,(#18150,#18162),.PCURVE_S1.);+#18145 = CIRCLE('',#18146,0.1);+#18146 = AXIS2_PLACEMENT_3D('',#18147,#18148,#18149);+#18147 = CARTESIAN_POINT('',(3.4975,2.72,1.2));+#18148 = DIRECTION('',(0.,-1.,0.));+#18149 = DIRECTION('',(1.,0.,0.));+#18150 = PCURVE('',#18151,#18156);+#18151 = CYLINDRICAL_SURFACE('',#18152,0.1);+#18152 = AXIS2_PLACEMENT_3D('',#18153,#18154,#18155);+#18153 = CARTESIAN_POINT('',(3.4975,2.54,1.2));+#18154 = DIRECTION('',(0.,1.,0.));+#18155 = DIRECTION('',(1.,0.,0.));+#18156 = DEFINITIONAL_REPRESENTATION('',(#18157),#18161);+#18157 = LINE('',#18158,#18159);+#18158 = CARTESIAN_POINT('',(6.28318530718,0.18));+#18159 = VECTOR('',#18160,1.);+#18160 = DIRECTION('',(-1.,-0.));+#18161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18162 = PCURVE('',#18163,#18168);+#18163 = PLANE('',#18164);+#18164 = AXIS2_PLACEMENT_3D('',#18165,#18166,#18167);+#18165 = CARTESIAN_POINT('',(4.408401242914,2.72,0.524461625949));+#18166 = DIRECTION('',(0.,1.,0.));+#18167 = DIRECTION('',(0.,0.,1.));+#18168 = DEFINITIONAL_REPRESENTATION('',(#18169),#18177);+#18169 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#18170,#18171,#18172,#18173+ ,#18174,#18175,#18176),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#18170 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18171 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#18172 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#18173 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#18174 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#18175 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#18176 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18178 = ORIENTED_EDGE('',*,*,#18179,.F.);+#18179 = EDGE_CURVE('',#18180,#18142,#18182,.T.);+#18180 = VERTEX_POINT('',#18181);+#18181 = CARTESIAN_POINT('',(3.4475,2.36,1.286602540378));+#18182 = SURFACE_CURVE('',#18183,(#18187,#18194),.PCURVE_S1.);+#18183 = LINE('',#18184,#18185);+#18184 = CARTESIAN_POINT('',(3.4475,2.54,1.286602540378));+#18185 = VECTOR('',#18186,1.);+#18186 = DIRECTION('',(0.,1.,0.));+#18187 = PCURVE('',#18151,#18188);+#18188 = DEFINITIONAL_REPRESENTATION('',(#18189),#18193);+#18189 = LINE('',#18190,#18191);+#18190 = CARTESIAN_POINT('',(4.188790204787,0.));+#18191 = VECTOR('',#18192,1.);+#18192 = DIRECTION('',(-0.,1.));+#18193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18194 = PCURVE('',#18195,#18200);+#18195 = PLANE('',#18196);+#18196 = AXIS2_PLACEMENT_3D('',#18197,#18198,#18199);+#18197 = CARTESIAN_POINT('',(3.4475,1.86,-0.5));+#18198 = DIRECTION('',(1.,0.,0.));+#18199 = DIRECTION('',(0.,0.,1.));+#18200 = DEFINITIONAL_REPRESENTATION('',(#18201),#18205);+#18201 = LINE('',#18202,#18203);+#18202 = CARTESIAN_POINT('',(1.786602540378,-0.68));+#18203 = VECTOR('',#18204,1.);+#18204 = DIRECTION('',(0.,-1.));+#18205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18206 = ORIENTED_EDGE('',*,*,#18207,.F.);+#18207 = EDGE_CURVE('',#18208,#18180,#18210,.T.);+#18208 = VERTEX_POINT('',#18209);+#18209 = CARTESIAN_POINT('',(3.4975,2.36,1.3));+#18210 = SURFACE_CURVE('',#18211,(#18216,#18223),.PCURVE_S1.);+#18211 = CIRCLE('',#18212,0.1);+#18212 = AXIS2_PLACEMENT_3D('',#18213,#18214,#18215);+#18213 = CARTESIAN_POINT('',(3.4975,2.36,1.2));+#18214 = DIRECTION('',(0.,-1.,0.));+#18215 = DIRECTION('',(1.,0.,0.));+#18216 = PCURVE('',#18151,#18217);+#18217 = DEFINITIONAL_REPRESENTATION('',(#18218),#18222);+#18218 = LINE('',#18219,#18220);+#18219 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#18220 = VECTOR('',#18221,1.);+#18221 = DIRECTION('',(-1.,0.));+#18222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18223 = PCURVE('',#18224,#18229);+#18224 = PLANE('',#18225);+#18225 = AXIS2_PLACEMENT_3D('',#18226,#18227,#18228);+#18226 = CARTESIAN_POINT('',(4.408401242914,2.36,0.524461625949));+#18227 = DIRECTION('',(0.,1.,0.));+#18228 = DIRECTION('',(0.,0.,1.));+#18229 = DEFINITIONAL_REPRESENTATION('',(#18230),#18238);+#18230 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#18231,#18232,#18233,#18234+ ,#18235,#18236,#18237),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#18231 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18232 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#18233 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#18234 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#18235 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#18236 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#18237 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18239 = ORIENTED_EDGE('',*,*,#18240,.T.);+#18240 = EDGE_CURVE('',#18208,#18140,#18241,.T.);+#18241 = SURFACE_CURVE('',#18242,(#18246,#18253),.PCURVE_S1.);+#18242 = LINE('',#18243,#18244);+#18243 = CARTESIAN_POINT('',(3.4975,2.36,1.3));+#18244 = VECTOR('',#18245,1.);+#18245 = DIRECTION('',(0.,1.,0.));+#18246 = PCURVE('',#18151,#18247);+#18247 = DEFINITIONAL_REPRESENTATION('',(#18248),#18252);+#18248 = LINE('',#18249,#18250);+#18249 = CARTESIAN_POINT('',(4.712388980385,-0.18));+#18250 = VECTOR('',#18251,1.);+#18251 = DIRECTION('',(0.,1.));+#18252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18253 = PCURVE('',#18254,#18259);+#18254 = PLANE('',#18255);+#18255 = AXIS2_PLACEMENT_3D('',#18256,#18257,#18258);+#18256 = CARTESIAN_POINT('',(3.4975,2.54,1.3));+#18257 = DIRECTION('',(0.,0.,1.));+#18258 = DIRECTION('',(1.,0.,0.));+#18259 = DEFINITIONAL_REPRESENTATION('',(#18260),#18264);+#18260 = LINE('',#18261,#18262);+#18261 = CARTESIAN_POINT('',(0.,-0.18));+#18262 = VECTOR('',#18263,1.);+#18263 = DIRECTION('',(0.,1.));+#18264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18265 = ADVANCED_FACE('',(#18266),#18254,.T.);+#18266 = FACE_BOUND('',#18267,.T.);+#18267 = EDGE_LOOP('',(#18268,#18269,#18292,#18320));+#18268 = ORIENTED_EDGE('',*,*,#18240,.F.);+#18269 = ORIENTED_EDGE('',*,*,#18270,.T.);+#18270 = EDGE_CURVE('',#18208,#18271,#18273,.T.);+#18271 = VERTEX_POINT('',#18272);+#18272 = CARTESIAN_POINT('',(3.763569972422,2.36,1.3));+#18273 = SURFACE_CURVE('',#18274,(#18278,#18285),.PCURVE_S1.);+#18274 = LINE('',#18275,#18276);+#18275 = CARTESIAN_POINT('',(3.4975,2.36,1.3));+#18276 = VECTOR('',#18277,1.);+#18277 = DIRECTION('',(1.,0.,0.));+#18278 = PCURVE('',#18254,#18279);+#18279 = DEFINITIONAL_REPRESENTATION('',(#18280),#18284);+#18280 = LINE('',#18281,#18282);+#18281 = CARTESIAN_POINT('',(0.,-0.18));+#18282 = VECTOR('',#18283,1.);+#18283 = DIRECTION('',(1.,0.));+#18284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18285 = PCURVE('',#18224,#18286);+#18286 = DEFINITIONAL_REPRESENTATION('',(#18287),#18291);+#18287 = LINE('',#18288,#18289);+#18288 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#18289 = VECTOR('',#18290,1.);+#18290 = DIRECTION('',(0.,1.));+#18291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18292 = ORIENTED_EDGE('',*,*,#18293,.T.);+#18293 = EDGE_CURVE('',#18271,#18294,#18296,.T.);+#18294 = VERTEX_POINT('',#18295);+#18295 = CARTESIAN_POINT('',(3.763569972422,2.72,1.3));+#18296 = SURFACE_CURVE('',#18297,(#18301,#18308),.PCURVE_S1.);+#18297 = LINE('',#18298,#18299);+#18298 = CARTESIAN_POINT('',(3.763569972422,2.36,1.3));+#18299 = VECTOR('',#18300,1.);+#18300 = DIRECTION('',(0.,1.,0.));+#18301 = PCURVE('',#18254,#18302);+#18302 = DEFINITIONAL_REPRESENTATION('',(#18303),#18307);+#18303 = LINE('',#18304,#18305);+#18304 = CARTESIAN_POINT('',(0.266069972422,-0.18));+#18305 = VECTOR('',#18306,1.);+#18306 = DIRECTION('',(0.,1.));+#18307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18308 = PCURVE('',#18309,#18314);+#18309 = CYLINDRICAL_SURFACE('',#18310,0.28);+#18310 = AXIS2_PLACEMENT_3D('',#18311,#18312,#18313);+#18311 = CARTESIAN_POINT('',(3.763569972422,2.54,1.02));+#18312 = DIRECTION('',(0.,1.,0.));+#18313 = DIRECTION('',(0.,0.,1.));+#18314 = DEFINITIONAL_REPRESENTATION('',(#18315),#18319);+#18315 = LINE('',#18316,#18317);+#18316 = CARTESIAN_POINT('',(0.,-0.18));+#18317 = VECTOR('',#18318,1.);+#18318 = DIRECTION('',(-0.,1.));+#18319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18320 = ORIENTED_EDGE('',*,*,#18321,.F.);+#18321 = EDGE_CURVE('',#18140,#18294,#18322,.T.);+#18322 = SURFACE_CURVE('',#18323,(#18327,#18334),.PCURVE_S1.);+#18323 = LINE('',#18324,#18325);+#18324 = CARTESIAN_POINT('',(3.4975,2.72,1.3));+#18325 = VECTOR('',#18326,1.);+#18326 = DIRECTION('',(1.,0.,0.));+#18327 = PCURVE('',#18254,#18328);+#18328 = DEFINITIONAL_REPRESENTATION('',(#18329),#18333);+#18329 = LINE('',#18330,#18331);+#18330 = CARTESIAN_POINT('',(0.,0.18));+#18331 = VECTOR('',#18332,1.);+#18332 = DIRECTION('',(1.,0.));+#18333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18334 = PCURVE('',#18163,#18335);+#18335 = DEFINITIONAL_REPRESENTATION('',(#18336),#18340);+#18336 = LINE('',#18337,#18338);+#18337 = CARTESIAN_POINT('',(0.775538374051,-0.910901242914));+#18338 = VECTOR('',#18339,1.);+#18339 = DIRECTION('',(0.,1.));+#18340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18341 = ADVANCED_FACE('',(#18342),#18163,.T.);+#18342 = FACE_BOUND('',#18343,.T.);+#18343 = EDGE_LOOP('',(#18344,#18345,#18346,#18370,#18398,#18427,#18455,+ #18483,#18511,#18540,#18568,#18597,#18625,#18658));+#18344 = ORIENTED_EDGE('',*,*,#18139,.F.);+#18345 = ORIENTED_EDGE('',*,*,#18321,.T.);+#18346 = ORIENTED_EDGE('',*,*,#18347,.T.);+#18347 = EDGE_CURVE('',#18294,#18348,#18350,.T.);+#18348 = VERTEX_POINT('',#18349);+#18349 = CARTESIAN_POINT('',(4.006065227246,2.72,1.159985897103));+#18350 = SURFACE_CURVE('',#18351,(#18356,#18363),.PCURVE_S1.);+#18351 = CIRCLE('',#18352,0.28);+#18352 = AXIS2_PLACEMENT_3D('',#18353,#18354,#18355);+#18353 = CARTESIAN_POINT('',(3.763569972422,2.72,1.02));+#18354 = DIRECTION('',(0.,1.,0.));+#18355 = DIRECTION('',(0.,0.,1.));+#18356 = PCURVE('',#18163,#18357);+#18357 = DEFINITIONAL_REPRESENTATION('',(#18358),#18362);+#18358 = CIRCLE('',#18359,0.28);+#18359 = AXIS2_PLACEMENT_2D('',#18360,#18361);+#18360 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#18361 = DIRECTION('',(1.,0.));+#18362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18363 = PCURVE('',#18309,#18364);+#18364 = DEFINITIONAL_REPRESENTATION('',(#18365),#18369);+#18365 = LINE('',#18366,#18367);+#18366 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#18367 = VECTOR('',#18368,1.);+#18368 = DIRECTION('',(1.,-0.));+#18369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18370 = ORIENTED_EDGE('',*,*,#18371,.T.);+#18371 = EDGE_CURVE('',#18348,#18372,#18374,.T.);+#18372 = VERTEX_POINT('',#18373);+#18373 = CARTESIAN_POINT('',(4.537145669057,2.72,0.240004029399));+#18374 = SURFACE_CURVE('',#18375,(#18379,#18386),.PCURVE_S1.);+#18375 = LINE('',#18376,#18377);+#18376 = CARTESIAN_POINT('',(3.954105448151,2.72,1.249994963251));+#18377 = VECTOR('',#18378,1.);+#18378 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18379 = PCURVE('',#18163,#18380);+#18380 = DEFINITIONAL_REPRESENTATION('',(#18381),#18385);+#18381 = LINE('',#18382,#18383);+#18382 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#18383 = VECTOR('',#18384,1.);+#18384 = DIRECTION('',(-0.866054481515,0.499949632511));+#18385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18386 = PCURVE('',#18387,#18392);+#18387 = PLANE('',#18388);+#18388 = AXIS2_PLACEMENT_3D('',#18389,#18390,#18391);+#18389 = CARTESIAN_POINT('',(4.006065227246,2.54,1.159985897103));+#18390 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#18391 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18392 = DEFINITIONAL_REPRESENTATION('',(#18393),#18397);+#18393 = LINE('',#18394,#18395);+#18394 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#18395 = VECTOR('',#18396,1.);+#18396 = DIRECTION('',(1.,0.));+#18397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18398 = ORIENTED_EDGE('',*,*,#18399,.F.);+#18399 = EDGE_CURVE('',#18400,#18372,#18402,.T.);+#18400 = VERTEX_POINT('',#18401);+#18401 = CARTESIAN_POINT('',(4.606430027578,2.72,0.2));+#18402 = SURFACE_CURVE('',#18403,(#18408,#18415),.PCURVE_S1.);+#18403 = CIRCLE('',#18404,8.E-02);+#18404 = AXIS2_PLACEMENT_3D('',#18405,#18406,#18407);+#18405 = CARTESIAN_POINT('',(4.606430027578,2.72,0.28));+#18406 = DIRECTION('',(0.,1.,0.));+#18407 = DIRECTION('',(0.,0.,1.));+#18408 = PCURVE('',#18163,#18409);+#18409 = DEFINITIONAL_REPRESENTATION('',(#18410),#18414);+#18410 = CIRCLE('',#18411,8.E-02);+#18411 = AXIS2_PLACEMENT_2D('',#18412,#18413);+#18412 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#18413 = DIRECTION('',(1.,0.));+#18414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18415 = PCURVE('',#18416,#18421);+#18416 = CYLINDRICAL_SURFACE('',#18417,8.E-02);+#18417 = AXIS2_PLACEMENT_3D('',#18418,#18419,#18420);+#18418 = CARTESIAN_POINT('',(4.606430027578,2.54,0.28));+#18419 = DIRECTION('',(0.,1.,0.));+#18420 = DIRECTION('',(0.,0.,1.));+#18421 = DEFINITIONAL_REPRESENTATION('',(#18422),#18426);+#18422 = LINE('',#18423,#18424);+#18423 = CARTESIAN_POINT('',(-0.,0.18));+#18424 = VECTOR('',#18425,1.);+#18425 = DIRECTION('',(1.,-0.));+#18426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18427 = ORIENTED_EDGE('',*,*,#18428,.T.);+#18428 = EDGE_CURVE('',#18400,#18429,#18431,.T.);+#18429 = VERTEX_POINT('',#18430);+#18430 = CARTESIAN_POINT('',(5.255,2.72,0.2));+#18431 = SURFACE_CURVE('',#18432,(#18436,#18443),.PCURVE_S1.);+#18432 = LINE('',#18433,#18434);+#18433 = CARTESIAN_POINT('',(4.5025,2.72,0.2));+#18434 = VECTOR('',#18435,1.);+#18435 = DIRECTION('',(1.,0.,0.));+#18436 = PCURVE('',#18163,#18437);+#18437 = DEFINITIONAL_REPRESENTATION('',(#18438),#18442);+#18438 = LINE('',#18439,#18440);+#18439 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#18440 = VECTOR('',#18441,1.);+#18441 = DIRECTION('',(0.,1.));+#18442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18443 = PCURVE('',#18444,#18449);+#18444 = PLANE('',#18445);+#18445 = AXIS2_PLACEMENT_3D('',#18446,#18447,#18448);+#18446 = CARTESIAN_POINT('',(4.606430027578,2.54,0.2));+#18447 = DIRECTION('',(0.,0.,1.));+#18448 = DIRECTION('',(1.,0.,0.));+#18449 = DEFINITIONAL_REPRESENTATION('',(#18450),#18454);+#18450 = LINE('',#18451,#18452);+#18451 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#18452 = VECTOR('',#18453,1.);+#18453 = DIRECTION('',(1.,0.));+#18454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18455 = ORIENTED_EDGE('',*,*,#18456,.T.);+#18456 = EDGE_CURVE('',#18429,#18457,#18459,.T.);+#18457 = VERTEX_POINT('',#18458);+#18458 = CARTESIAN_POINT('',(5.255,2.72,0.));+#18459 = SURFACE_CURVE('',#18460,(#18464,#18471),.PCURVE_S1.);+#18460 = LINE('',#18461,#18462);+#18461 = CARTESIAN_POINT('',(5.255,2.72,1.223081297441E-02));+#18462 = VECTOR('',#18463,1.);+#18463 = DIRECTION('',(0.,0.,-1.));+#18464 = PCURVE('',#18163,#18465);+#18465 = DEFINITIONAL_REPRESENTATION('',(#18466),#18470);+#18466 = LINE('',#18467,#18468);+#18467 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#18468 = VECTOR('',#18469,1.);+#18469 = DIRECTION('',(-1.,0.));+#18470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18471 = PCURVE('',#18472,#18477);+#18472 = PLANE('',#18473);+#18473 = AXIS2_PLACEMENT_3D('',#18474,#18475,#18476);+#18474 = CARTESIAN_POINT('',(5.255,1.86,-0.5));+#18475 = DIRECTION('',(1.,0.,0.));+#18476 = DIRECTION('',(0.,0.,1.));+#18477 = DEFINITIONAL_REPRESENTATION('',(#18478),#18482);+#18478 = LINE('',#18479,#18480);+#18479 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#18480 = VECTOR('',#18481,1.);+#18481 = DIRECTION('',(-1.,0.));+#18482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18483 = ORIENTED_EDGE('',*,*,#18484,.F.);+#18484 = EDGE_CURVE('',#18485,#18457,#18487,.T.);+#18485 = VERTEX_POINT('',#18486);+#18486 = CARTESIAN_POINT('',(4.606430027578,2.72,-5.551115123126E-17));+#18487 = SURFACE_CURVE('',#18488,(#18492,#18499),.PCURVE_S1.);+#18488 = LINE('',#18489,#18490);+#18489 = CARTESIAN_POINT('',(4.5025,2.72,0.));+#18490 = VECTOR('',#18491,1.);+#18491 = DIRECTION('',(1.,0.,0.));+#18492 = PCURVE('',#18163,#18493);+#18493 = DEFINITIONAL_REPRESENTATION('',(#18494),#18498);+#18494 = LINE('',#18495,#18496);+#18495 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#18496 = VECTOR('',#18497,1.);+#18497 = DIRECTION('',(0.,1.));+#18498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18499 = PCURVE('',#18500,#18505);+#18500 = PLANE('',#18501);+#18501 = AXIS2_PLACEMENT_3D('',#18502,#18503,#18504);+#18502 = CARTESIAN_POINT('',(4.606430027578,2.54,0.));+#18503 = DIRECTION('',(0.,0.,1.));+#18504 = DIRECTION('',(1.,0.,0.));+#18505 = DEFINITIONAL_REPRESENTATION('',(#18506),#18510);+#18506 = LINE('',#18507,#18508);+#18507 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#18508 = VECTOR('',#18509,1.);+#18509 = DIRECTION('',(1.,0.));+#18510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18511 = ORIENTED_EDGE('',*,*,#18512,.T.);+#18512 = EDGE_CURVE('',#18485,#18513,#18515,.T.);+#18513 = VERTEX_POINT('',#18514);+#18514 = CARTESIAN_POINT('',(4.363934772754,2.72,0.140014102897));+#18515 = SURFACE_CURVE('',#18516,(#18521,#18528),.PCURVE_S1.);+#18516 = CIRCLE('',#18517,0.28);+#18517 = AXIS2_PLACEMENT_3D('',#18518,#18519,#18520);+#18518 = CARTESIAN_POINT('',(4.606430027578,2.72,0.28));+#18519 = DIRECTION('',(0.,1.,0.));+#18520 = DIRECTION('',(0.,0.,1.));+#18521 = PCURVE('',#18163,#18522);+#18522 = DEFINITIONAL_REPRESENTATION('',(#18523),#18527);+#18523 = CIRCLE('',#18524,0.28);+#18524 = AXIS2_PLACEMENT_2D('',#18525,#18526);+#18525 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#18526 = DIRECTION('',(1.,0.));+#18527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18528 = PCURVE('',#18529,#18534);+#18529 = CYLINDRICAL_SURFACE('',#18530,0.28);+#18530 = AXIS2_PLACEMENT_3D('',#18531,#18532,#18533);+#18531 = CARTESIAN_POINT('',(4.606430027578,2.54,0.28));+#18532 = DIRECTION('',(0.,1.,0.));+#18533 = DIRECTION('',(0.,0.,1.));+#18534 = DEFINITIONAL_REPRESENTATION('',(#18535),#18539);+#18535 = LINE('',#18536,#18537);+#18536 = CARTESIAN_POINT('',(-0.,0.18));+#18537 = VECTOR('',#18538,1.);+#18538 = DIRECTION('',(1.,-0.));+#18539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18540 = ORIENTED_EDGE('',*,*,#18541,.F.);+#18541 = EDGE_CURVE('',#18542,#18513,#18544,.T.);+#18542 = VERTEX_POINT('',#18543);+#18543 = CARTESIAN_POINT('',(3.832854330943,2.72,1.059995970601));+#18544 = SURFACE_CURVE('',#18545,(#18549,#18556),.PCURVE_S1.);+#18545 = LINE('',#18546,#18547);+#18546 = CARTESIAN_POINT('',(3.780894551849,2.72,1.150005036749));+#18547 = VECTOR('',#18548,1.);+#18548 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18549 = PCURVE('',#18163,#18550);+#18550 = DEFINITIONAL_REPRESENTATION('',(#18551),#18555);+#18551 = LINE('',#18552,#18553);+#18552 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#18553 = VECTOR('',#18554,1.);+#18554 = DIRECTION('',(-0.866054481515,0.499949632511));+#18555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18556 = PCURVE('',#18557,#18562);+#18557 = PLANE('',#18558);+#18558 = AXIS2_PLACEMENT_3D('',#18559,#18560,#18561);+#18559 = CARTESIAN_POINT('',(3.832854330943,2.54,1.059995970601));+#18560 = DIRECTION('',(0.866054481515,0.,0.499949632511));+#18561 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18562 = DEFINITIONAL_REPRESENTATION('',(#18563),#18567);+#18563 = LINE('',#18564,#18565);+#18564 = CARTESIAN_POINT('',(-0.103930027578,0.18));+#18565 = VECTOR('',#18566,1.);+#18566 = DIRECTION('',(1.,0.));+#18567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18568 = ORIENTED_EDGE('',*,*,#18569,.F.);+#18569 = EDGE_CURVE('',#18570,#18542,#18572,.T.);+#18570 = VERTEX_POINT('',#18571);+#18571 = CARTESIAN_POINT('',(3.763569972422,2.72,1.1));+#18572 = SURFACE_CURVE('',#18573,(#18578,#18585),.PCURVE_S1.);+#18573 = CIRCLE('',#18574,8.E-02);+#18574 = AXIS2_PLACEMENT_3D('',#18575,#18576,#18577);+#18575 = CARTESIAN_POINT('',(3.763569972422,2.72,1.02));+#18576 = DIRECTION('',(0.,1.,0.));+#18577 = DIRECTION('',(0.,0.,1.));+#18578 = PCURVE('',#18163,#18579);+#18579 = DEFINITIONAL_REPRESENTATION('',(#18580),#18584);+#18580 = CIRCLE('',#18581,8.E-02);+#18581 = AXIS2_PLACEMENT_2D('',#18582,#18583);+#18582 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#18583 = DIRECTION('',(1.,0.));+#18584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18585 = PCURVE('',#18586,#18591);+#18586 = CYLINDRICAL_SURFACE('',#18587,8.E-02);+#18587 = AXIS2_PLACEMENT_3D('',#18588,#18589,#18590);+#18588 = CARTESIAN_POINT('',(3.763569972422,2.54,1.02));+#18589 = DIRECTION('',(0.,1.,0.));+#18590 = DIRECTION('',(0.,0.,1.));+#18591 = DEFINITIONAL_REPRESENTATION('',(#18592),#18596);+#18592 = LINE('',#18593,#18594);+#18593 = CARTESIAN_POINT('',(-4.138911435803E-13,0.18));+#18594 = VECTOR('',#18595,1.);+#18595 = DIRECTION('',(1.,-0.));+#18596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18597 = ORIENTED_EDGE('',*,*,#18598,.F.);+#18598 = EDGE_CURVE('',#18599,#18570,#18601,.T.);+#18599 = VERTEX_POINT('',#18600);+#18600 = CARTESIAN_POINT('',(3.4975,2.72,1.1));+#18601 = SURFACE_CURVE('',#18602,(#18606,#18613),.PCURVE_S1.);+#18602 = LINE('',#18603,#18604);+#18603 = CARTESIAN_POINT('',(3.4975,2.72,1.1));+#18604 = VECTOR('',#18605,1.);+#18605 = DIRECTION('',(1.,0.,0.));+#18606 = PCURVE('',#18163,#18607);+#18607 = DEFINITIONAL_REPRESENTATION('',(#18608),#18612);+#18608 = LINE('',#18609,#18610);+#18609 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#18610 = VECTOR('',#18611,1.);+#18611 = DIRECTION('',(0.,1.));+#18612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18613 = PCURVE('',#18614,#18619);+#18614 = PLANE('',#18615);+#18615 = AXIS2_PLACEMENT_3D('',#18616,#18617,#18618);+#18616 = CARTESIAN_POINT('',(3.4975,2.54,1.1));+#18617 = DIRECTION('',(0.,0.,1.));+#18618 = DIRECTION('',(1.,0.,0.));+#18619 = DEFINITIONAL_REPRESENTATION('',(#18620),#18624);+#18620 = LINE('',#18621,#18622);+#18621 = CARTESIAN_POINT('',(0.,0.18));+#18622 = VECTOR('',#18623,1.);+#18623 = DIRECTION('',(1.,0.));+#18624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18625 = ORIENTED_EDGE('',*,*,#18626,.F.);+#18626 = EDGE_CURVE('',#18627,#18599,#18629,.T.);+#18627 = VERTEX_POINT('',#18628);+#18628 = CARTESIAN_POINT('',(3.4475,2.72,1.113397459622));+#18629 = SURFACE_CURVE('',#18630,(#18635,#18646),.PCURVE_S1.);+#18630 = CIRCLE('',#18631,0.1);+#18631 = AXIS2_PLACEMENT_3D('',#18632,#18633,#18634);+#18632 = CARTESIAN_POINT('',(3.4975,2.72,1.2));+#18633 = DIRECTION('',(0.,-1.,0.));+#18634 = DIRECTION('',(1.,0.,0.));+#18635 = PCURVE('',#18163,#18636);+#18636 = DEFINITIONAL_REPRESENTATION('',(#18637),#18645);+#18637 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#18638,#18639,#18640,#18641+ ,#18642,#18643,#18644),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#18638 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18639 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#18640 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#18641 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#18642 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#18643 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#18644 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18646 = PCURVE('',#18647,#18652);+#18647 = CYLINDRICAL_SURFACE('',#18648,0.1);+#18648 = AXIS2_PLACEMENT_3D('',#18649,#18650,#18651);+#18649 = CARTESIAN_POINT('',(3.4975,2.54,1.2));+#18650 = DIRECTION('',(0.,1.,0.));+#18651 = DIRECTION('',(1.,0.,0.));+#18652 = DEFINITIONAL_REPRESENTATION('',(#18653),#18657);+#18653 = LINE('',#18654,#18655);+#18654 = CARTESIAN_POINT('',(6.28318530718,0.18));+#18655 = VECTOR('',#18656,1.);+#18656 = DIRECTION('',(-1.,-0.));+#18657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18658 = ORIENTED_EDGE('',*,*,#18659,.F.);+#18659 = EDGE_CURVE('',#18142,#18627,#18660,.T.);+#18660 = SURFACE_CURVE('',#18661,(#18665,#18672),.PCURVE_S1.);+#18661 = LINE('',#18662,#18663);+#18662 = CARTESIAN_POINT('',(3.4475,2.72,1.223081297441E-02));+#18663 = VECTOR('',#18664,1.);+#18664 = DIRECTION('',(0.,0.,-1.));+#18665 = PCURVE('',#18163,#18666);+#18666 = DEFINITIONAL_REPRESENTATION('',(#18667),#18671);+#18667 = LINE('',#18668,#18669);+#18668 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#18669 = VECTOR('',#18670,1.);+#18670 = DIRECTION('',(-1.,0.));+#18671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18672 = PCURVE('',#18195,#18673);+#18673 = DEFINITIONAL_REPRESENTATION('',(#18674),#18678);+#18674 = LINE('',#18675,#18676);+#18675 = CARTESIAN_POINT('',(0.512230812974,-0.86));+#18676 = VECTOR('',#18677,1.);+#18677 = DIRECTION('',(-1.,0.));+#18678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18679 = ADVANCED_FACE('',(#18680),#18195,.F.);+#18680 = FACE_BOUND('',#18681,.F.);+#18681 = EDGE_LOOP('',(#18682,#18683,#18706,#18727));+#18682 = ORIENTED_EDGE('',*,*,#18179,.F.);+#18683 = ORIENTED_EDGE('',*,*,#18684,.T.);+#18684 = EDGE_CURVE('',#18180,#18685,#18687,.T.);+#18685 = VERTEX_POINT('',#18686);+#18686 = CARTESIAN_POINT('',(3.4475,2.36,1.113397459622));+#18687 = SURFACE_CURVE('',#18688,(#18692,#18699),.PCURVE_S1.);+#18688 = LINE('',#18689,#18690);+#18689 = CARTESIAN_POINT('',(3.4475,2.36,1.223081297441E-02));+#18690 = VECTOR('',#18691,1.);+#18691 = DIRECTION('',(0.,0.,-1.));+#18692 = PCURVE('',#18195,#18693);+#18693 = DEFINITIONAL_REPRESENTATION('',(#18694),#18698);+#18694 = LINE('',#18695,#18696);+#18695 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#18696 = VECTOR('',#18697,1.);+#18697 = DIRECTION('',(-1.,0.));+#18698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18699 = PCURVE('',#18224,#18700);+#18700 = DEFINITIONAL_REPRESENTATION('',(#18701),#18705);+#18701 = LINE('',#18702,#18703);+#18702 = CARTESIAN_POINT('',(-0.512230812975,-0.960901242914));+#18703 = VECTOR('',#18704,1.);+#18704 = DIRECTION('',(-1.,0.));+#18705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18706 = ORIENTED_EDGE('',*,*,#18707,.T.);+#18707 = EDGE_CURVE('',#18685,#18627,#18708,.T.);+#18708 = SURFACE_CURVE('',#18709,(#18713,#18720),.PCURVE_S1.);+#18709 = LINE('',#18710,#18711);+#18710 = CARTESIAN_POINT('',(3.4475,2.54,1.113397459622));+#18711 = VECTOR('',#18712,1.);+#18712 = DIRECTION('',(0.,1.,0.));+#18713 = PCURVE('',#18195,#18714);+#18714 = DEFINITIONAL_REPRESENTATION('',(#18715),#18719);+#18715 = LINE('',#18716,#18717);+#18716 = CARTESIAN_POINT('',(1.613397459622,-0.68));+#18717 = VECTOR('',#18718,1.);+#18718 = DIRECTION('',(0.,-1.));+#18719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18720 = PCURVE('',#18647,#18721);+#18721 = DEFINITIONAL_REPRESENTATION('',(#18722),#18726);+#18722 = LINE('',#18723,#18724);+#18723 = CARTESIAN_POINT('',(2.094395102394,0.));+#18724 = VECTOR('',#18725,1.);+#18725 = DIRECTION('',(-0.,1.));+#18726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18727 = ORIENTED_EDGE('',*,*,#18659,.F.);+#18728 = ADVANCED_FACE('',(#18729),#18224,.F.);+#18729 = FACE_BOUND('',#18730,.F.);+#18730 = EDGE_LOOP('',(#18731,#18732,#18733,#18757,#18780,#18804,#18827,+ #18850,#18873,#18897,#18920,#18944,#18967,#18993));+#18731 = ORIENTED_EDGE('',*,*,#18207,.F.);+#18732 = ORIENTED_EDGE('',*,*,#18270,.T.);+#18733 = ORIENTED_EDGE('',*,*,#18734,.T.);+#18734 = EDGE_CURVE('',#18271,#18735,#18737,.T.);+#18735 = VERTEX_POINT('',#18736);+#18736 = CARTESIAN_POINT('',(4.006065227246,2.36,1.159985897103));+#18737 = SURFACE_CURVE('',#18738,(#18743,#18750),.PCURVE_S1.);+#18738 = CIRCLE('',#18739,0.28);+#18739 = AXIS2_PLACEMENT_3D('',#18740,#18741,#18742);+#18740 = CARTESIAN_POINT('',(3.763569972422,2.36,1.02));+#18741 = DIRECTION('',(0.,1.,0.));+#18742 = DIRECTION('',(0.,0.,1.));+#18743 = PCURVE('',#18224,#18744);+#18744 = DEFINITIONAL_REPRESENTATION('',(#18745),#18749);+#18745 = CIRCLE('',#18746,0.28);+#18746 = AXIS2_PLACEMENT_2D('',#18747,#18748);+#18747 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#18748 = DIRECTION('',(1.,0.));+#18749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18750 = PCURVE('',#18309,#18751);+#18751 = DEFINITIONAL_REPRESENTATION('',(#18752),#18756);+#18752 = LINE('',#18753,#18754);+#18753 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#18754 = VECTOR('',#18755,1.);+#18755 = DIRECTION('',(1.,0.));+#18756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18757 = ORIENTED_EDGE('',*,*,#18758,.T.);+#18758 = EDGE_CURVE('',#18735,#18759,#18761,.T.);+#18759 = VERTEX_POINT('',#18760);+#18760 = CARTESIAN_POINT('',(4.537145669057,2.36,0.240004029399));+#18761 = SURFACE_CURVE('',#18762,(#18766,#18773),.PCURVE_S1.);+#18762 = LINE('',#18763,#18764);+#18763 = CARTESIAN_POINT('',(3.954105448151,2.36,1.249994963251));+#18764 = VECTOR('',#18765,1.);+#18765 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18766 = PCURVE('',#18224,#18767);+#18767 = DEFINITIONAL_REPRESENTATION('',(#18768),#18772);+#18768 = LINE('',#18769,#18770);+#18769 = CARTESIAN_POINT('',(0.725533337302,-0.454295794763));+#18770 = VECTOR('',#18771,1.);+#18771 = DIRECTION('',(-0.866054481515,0.499949632511));+#18772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18773 = PCURVE('',#18387,#18774);+#18774 = DEFINITIONAL_REPRESENTATION('',(#18775),#18779);+#18775 = LINE('',#18776,#18777);+#18776 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#18777 = VECTOR('',#18778,1.);+#18778 = DIRECTION('',(1.,0.));+#18779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18780 = ORIENTED_EDGE('',*,*,#18781,.F.);+#18781 = EDGE_CURVE('',#18782,#18759,#18784,.T.);+#18782 = VERTEX_POINT('',#18783);+#18783 = CARTESIAN_POINT('',(4.606430027578,2.36,0.2));+#18784 = SURFACE_CURVE('',#18785,(#18790,#18797),.PCURVE_S1.);+#18785 = CIRCLE('',#18786,8.E-02);+#18786 = AXIS2_PLACEMENT_3D('',#18787,#18788,#18789);+#18787 = CARTESIAN_POINT('',(4.606430027578,2.36,0.28));+#18788 = DIRECTION('',(0.,1.,0.));+#18789 = DIRECTION('',(0.,0.,1.));+#18790 = PCURVE('',#18224,#18791);+#18791 = DEFINITIONAL_REPRESENTATION('',(#18792),#18796);+#18792 = CIRCLE('',#18793,8.E-02);+#18793 = AXIS2_PLACEMENT_2D('',#18794,#18795);+#18794 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#18795 = DIRECTION('',(1.,0.));+#18796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18797 = PCURVE('',#18416,#18798);+#18798 = DEFINITIONAL_REPRESENTATION('',(#18799),#18803);+#18799 = LINE('',#18800,#18801);+#18800 = CARTESIAN_POINT('',(0.,-0.18));+#18801 = VECTOR('',#18802,1.);+#18802 = DIRECTION('',(1.,0.));+#18803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18804 = ORIENTED_EDGE('',*,*,#18805,.T.);+#18805 = EDGE_CURVE('',#18782,#18806,#18808,.T.);+#18806 = VERTEX_POINT('',#18807);+#18807 = CARTESIAN_POINT('',(5.255,2.36,0.2));+#18808 = SURFACE_CURVE('',#18809,(#18813,#18820),.PCURVE_S1.);+#18809 = LINE('',#18810,#18811);+#18810 = CARTESIAN_POINT('',(4.5025,2.36,0.2));+#18811 = VECTOR('',#18812,1.);+#18812 = DIRECTION('',(1.,0.,0.));+#18813 = PCURVE('',#18224,#18814);+#18814 = DEFINITIONAL_REPRESENTATION('',(#18815),#18819);+#18815 = LINE('',#18816,#18817);+#18816 = CARTESIAN_POINT('',(-0.324461625949,9.4098757086E-02));+#18817 = VECTOR('',#18818,1.);+#18818 = DIRECTION('',(0.,1.));+#18819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18820 = PCURVE('',#18444,#18821);+#18821 = DEFINITIONAL_REPRESENTATION('',(#18822),#18826);+#18822 = LINE('',#18823,#18824);+#18823 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#18824 = VECTOR('',#18825,1.);+#18825 = DIRECTION('',(1.,0.));+#18826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18827 = ORIENTED_EDGE('',*,*,#18828,.T.);+#18828 = EDGE_CURVE('',#18806,#18829,#18831,.T.);+#18829 = VERTEX_POINT('',#18830);+#18830 = CARTESIAN_POINT('',(5.255,2.36,0.));+#18831 = SURFACE_CURVE('',#18832,(#18836,#18843),.PCURVE_S1.);+#18832 = LINE('',#18833,#18834);+#18833 = CARTESIAN_POINT('',(5.255,2.36,1.223081297441E-02));+#18834 = VECTOR('',#18835,1.);+#18835 = DIRECTION('',(0.,0.,-1.));+#18836 = PCURVE('',#18224,#18837);+#18837 = DEFINITIONAL_REPRESENTATION('',(#18838),#18842);+#18838 = LINE('',#18839,#18840);+#18839 = CARTESIAN_POINT('',(-0.512230812975,0.846598757086));+#18840 = VECTOR('',#18841,1.);+#18841 = DIRECTION('',(-1.,0.));+#18842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18843 = PCURVE('',#18472,#18844);+#18844 = DEFINITIONAL_REPRESENTATION('',(#18845),#18849);+#18845 = LINE('',#18846,#18847);+#18846 = CARTESIAN_POINT('',(0.512230812974,-0.5));+#18847 = VECTOR('',#18848,1.);+#18848 = DIRECTION('',(-1.,0.));+#18849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18850 = ORIENTED_EDGE('',*,*,#18851,.F.);+#18851 = EDGE_CURVE('',#18852,#18829,#18854,.T.);+#18852 = VERTEX_POINT('',#18853);+#18853 = CARTESIAN_POINT('',(4.606430027578,2.36,-5.551115123126E-17));+#18854 = SURFACE_CURVE('',#18855,(#18859,#18866),.PCURVE_S1.);+#18855 = LINE('',#18856,#18857);+#18856 = CARTESIAN_POINT('',(4.5025,2.36,0.));+#18857 = VECTOR('',#18858,1.);+#18858 = DIRECTION('',(1.,0.,0.));+#18859 = PCURVE('',#18224,#18860);+#18860 = DEFINITIONAL_REPRESENTATION('',(#18861),#18865);+#18861 = LINE('',#18862,#18863);+#18862 = CARTESIAN_POINT('',(-0.524461625949,9.4098757086E-02));+#18863 = VECTOR('',#18864,1.);+#18864 = DIRECTION('',(0.,1.));+#18865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18866 = PCURVE('',#18500,#18867);+#18867 = DEFINITIONAL_REPRESENTATION('',(#18868),#18872);+#18868 = LINE('',#18869,#18870);+#18869 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#18870 = VECTOR('',#18871,1.);+#18871 = DIRECTION('',(1.,0.));+#18872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18873 = ORIENTED_EDGE('',*,*,#18874,.T.);+#18874 = EDGE_CURVE('',#18852,#18875,#18877,.T.);+#18875 = VERTEX_POINT('',#18876);+#18876 = CARTESIAN_POINT('',(4.363934772754,2.36,0.140014102897));+#18877 = SURFACE_CURVE('',#18878,(#18883,#18890),.PCURVE_S1.);+#18878 = CIRCLE('',#18879,0.28);+#18879 = AXIS2_PLACEMENT_3D('',#18880,#18881,#18882);+#18880 = CARTESIAN_POINT('',(4.606430027578,2.36,0.28));+#18881 = DIRECTION('',(0.,1.,0.));+#18882 = DIRECTION('',(0.,0.,1.));+#18883 = PCURVE('',#18224,#18884);+#18884 = DEFINITIONAL_REPRESENTATION('',(#18885),#18889);+#18885 = CIRCLE('',#18886,0.28);+#18886 = AXIS2_PLACEMENT_2D('',#18887,#18888);+#18887 = CARTESIAN_POINT('',(-0.244461625949,0.198028784664));+#18888 = DIRECTION('',(1.,0.));+#18889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18890 = PCURVE('',#18529,#18891);+#18891 = DEFINITIONAL_REPRESENTATION('',(#18892),#18896);+#18892 = LINE('',#18893,#18894);+#18893 = CARTESIAN_POINT('',(0.,-0.18));+#18894 = VECTOR('',#18895,1.);+#18895 = DIRECTION('',(1.,0.));+#18896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18897 = ORIENTED_EDGE('',*,*,#18898,.F.);+#18898 = EDGE_CURVE('',#18899,#18875,#18901,.T.);+#18899 = VERTEX_POINT('',#18900);+#18900 = CARTESIAN_POINT('',(3.832854330943,2.36,1.059995970601));+#18901 = SURFACE_CURVE('',#18902,(#18906,#18913),.PCURVE_S1.);+#18902 = LINE('',#18903,#18904);+#18903 = CARTESIAN_POINT('',(3.780894551849,2.36,1.150005036749));+#18904 = VECTOR('',#18905,1.);+#18905 = DIRECTION('',(0.499949632511,0.,-0.866054481515));+#18906 = PCURVE('',#18224,#18907);+#18907 = DEFINITIONAL_REPRESENTATION('',(#18908),#18912);+#18908 = LINE('',#18909,#18910);+#18909 = CARTESIAN_POINT('',(0.6255434108,-0.627506691065));+#18910 = VECTOR('',#18911,1.);+#18911 = DIRECTION('',(-0.866054481515,0.499949632511));+#18912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18913 = PCURVE('',#18557,#18914);+#18914 = DEFINITIONAL_REPRESENTATION('',(#18915),#18919);+#18915 = LINE('',#18916,#18917);+#18916 = CARTESIAN_POINT('',(-0.103930027578,-0.18));+#18917 = VECTOR('',#18918,1.);+#18918 = DIRECTION('',(1.,0.));+#18919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18920 = ORIENTED_EDGE('',*,*,#18921,.F.);+#18921 = EDGE_CURVE('',#18922,#18899,#18924,.T.);+#18922 = VERTEX_POINT('',#18923);+#18923 = CARTESIAN_POINT('',(3.763569972422,2.36,1.1));+#18924 = SURFACE_CURVE('',#18925,(#18930,#18937),.PCURVE_S1.);+#18925 = CIRCLE('',#18926,8.E-02);+#18926 = AXIS2_PLACEMENT_3D('',#18927,#18928,#18929);+#18927 = CARTESIAN_POINT('',(3.763569972422,2.36,1.02));+#18928 = DIRECTION('',(0.,1.,0.));+#18929 = DIRECTION('',(0.,0.,1.));+#18930 = PCURVE('',#18224,#18931);+#18931 = DEFINITIONAL_REPRESENTATION('',(#18932),#18936);+#18932 = CIRCLE('',#18933,8.E-02);+#18933 = AXIS2_PLACEMENT_2D('',#18934,#18935);+#18934 = CARTESIAN_POINT('',(0.495538374051,-0.644831270492));+#18935 = DIRECTION('',(1.,0.));+#18936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18937 = PCURVE('',#18586,#18938);+#18938 = DEFINITIONAL_REPRESENTATION('',(#18939),#18943);+#18939 = LINE('',#18940,#18941);+#18940 = CARTESIAN_POINT('',(-4.138911435803E-13,-0.18));+#18941 = VECTOR('',#18942,1.);+#18942 = DIRECTION('',(1.,0.));+#18943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18944 = ORIENTED_EDGE('',*,*,#18945,.F.);+#18945 = EDGE_CURVE('',#18946,#18922,#18948,.T.);+#18946 = VERTEX_POINT('',#18947);+#18947 = CARTESIAN_POINT('',(3.4975,2.36,1.1));+#18948 = SURFACE_CURVE('',#18949,(#18953,#18960),.PCURVE_S1.);+#18949 = LINE('',#18950,#18951);+#18950 = CARTESIAN_POINT('',(3.4975,2.36,1.1));+#18951 = VECTOR('',#18952,1.);+#18952 = DIRECTION('',(1.,0.,0.));+#18953 = PCURVE('',#18224,#18954);+#18954 = DEFINITIONAL_REPRESENTATION('',(#18955),#18959);+#18955 = LINE('',#18956,#18957);+#18956 = CARTESIAN_POINT('',(0.575538374051,-0.910901242914));+#18957 = VECTOR('',#18958,1.);+#18958 = DIRECTION('',(0.,1.));+#18959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18960 = PCURVE('',#18614,#18961);+#18961 = DEFINITIONAL_REPRESENTATION('',(#18962),#18966);+#18962 = LINE('',#18963,#18964);+#18963 = CARTESIAN_POINT('',(0.,-0.18));+#18964 = VECTOR('',#18965,1.);+#18965 = DIRECTION('',(1.,0.));+#18966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18967 = ORIENTED_EDGE('',*,*,#18968,.F.);+#18968 = EDGE_CURVE('',#18685,#18946,#18969,.T.);+#18969 = SURFACE_CURVE('',#18970,(#18975,#18986),.PCURVE_S1.);+#18970 = CIRCLE('',#18971,0.1);+#18971 = AXIS2_PLACEMENT_3D('',#18972,#18973,#18974);+#18972 = CARTESIAN_POINT('',(3.4975,2.36,1.2));+#18973 = DIRECTION('',(0.,-1.,0.));+#18974 = DIRECTION('',(1.,0.,0.));+#18975 = PCURVE('',#18224,#18976);+#18976 = DEFINITIONAL_REPRESENTATION('',(#18977),#18985);+#18977 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#18978,#18979,#18980,#18981+ ,#18982,#18983,#18984),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#18978 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18979 = CARTESIAN_POINT('',(0.848743454808,-0.810901242914));+#18980 = CARTESIAN_POINT('',(0.762140914429,-0.960901242914));+#18981 = CARTESIAN_POINT('',(0.675538374051,-1.110901242914));+#18982 = CARTESIAN_POINT('',(0.588935833673,-0.960901242914));+#18983 = CARTESIAN_POINT('',(0.502333293294,-0.810901242914));+#18984 = CARTESIAN_POINT('',(0.675538374051,-0.810901242914));+#18985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18986 = PCURVE('',#18647,#18987);+#18987 = DEFINITIONAL_REPRESENTATION('',(#18988),#18992);+#18988 = LINE('',#18989,#18990);+#18989 = CARTESIAN_POINT('',(6.28318530718,-0.18));+#18990 = VECTOR('',#18991,1.);+#18991 = DIRECTION('',(-1.,0.));+#18992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#18993 = ORIENTED_EDGE('',*,*,#18684,.F.);+#18994 = ADVANCED_FACE('',(#18995),#18309,.T.);+#18995 = FACE_BOUND('',#18996,.T.);+#18996 = EDGE_LOOP('',(#18997,#18998,#18999,#19020));+#18997 = ORIENTED_EDGE('',*,*,#18293,.F.);+#18998 = ORIENTED_EDGE('',*,*,#18734,.T.);+#18999 = ORIENTED_EDGE('',*,*,#19000,.T.);+#19000 = EDGE_CURVE('',#18735,#18348,#19001,.T.);+#19001 = SURFACE_CURVE('',#19002,(#19006,#19013),.PCURVE_S1.);+#19002 = LINE('',#19003,#19004);+#19003 = CARTESIAN_POINT('',(4.006065227246,2.36,1.159985897103));+#19004 = VECTOR('',#19005,1.);+#19005 = DIRECTION('',(0.,1.,0.));+#19006 = PCURVE('',#18309,#19007);+#19007 = DEFINITIONAL_REPRESENTATION('',(#19008),#19012);+#19008 = LINE('',#19009,#19010);+#19009 = CARTESIAN_POINT('',(1.047255709587,-0.18));+#19010 = VECTOR('',#19011,1.);+#19011 = DIRECTION('',(-0.,1.));+#19012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19013 = PCURVE('',#18387,#19014);+#19014 = DEFINITIONAL_REPRESENTATION('',(#19015),#19019);+#19015 = LINE('',#19016,#19017);+#19016 = CARTESIAN_POINT('',(0.,-0.18));+#19017 = VECTOR('',#19018,1.);+#19018 = DIRECTION('',(0.,1.));+#19019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19020 = ORIENTED_EDGE('',*,*,#18347,.F.);+#19021 = ADVANCED_FACE('',(#19022),#18647,.T.);+#19022 = FACE_BOUND('',#19023,.T.);+#19023 = EDGE_LOOP('',(#19024,#19025,#19046,#19047));+#19024 = ORIENTED_EDGE('',*,*,#18626,.T.);+#19025 = ORIENTED_EDGE('',*,*,#19026,.T.);+#19026 = EDGE_CURVE('',#18599,#18946,#19027,.T.);+#19027 = SURFACE_CURVE('',#19028,(#19032,#19039),.PCURVE_S1.);+#19028 = LINE('',#19029,#19030);+#19029 = CARTESIAN_POINT('',(3.4975,2.72,1.1));+#19030 = VECTOR('',#19031,1.);+#19031 = DIRECTION('',(0.,-1.,0.));+#19032 = PCURVE('',#18647,#19033);+#19033 = DEFINITIONAL_REPRESENTATION('',(#19034),#19038);+#19034 = LINE('',#19035,#19036);+#19035 = CARTESIAN_POINT('',(1.570796326795,0.18));+#19036 = VECTOR('',#19037,1.);+#19037 = DIRECTION('',(-0.,-1.));+#19038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19039 = PCURVE('',#18614,#19040);+#19040 = DEFINITIONAL_REPRESENTATION('',(#19041),#19045);+#19041 = LINE('',#19042,#19043);+#19042 = CARTESIAN_POINT('',(0.,0.18));+#19043 = VECTOR('',#19044,1.);+#19044 = DIRECTION('',(0.,-1.));+#19045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19046 = ORIENTED_EDGE('',*,*,#18968,.F.);+#19047 = ORIENTED_EDGE('',*,*,#18707,.T.);+#19048 = ADVANCED_FACE('',(#19049),#18614,.F.);+#19049 = FACE_BOUND('',#19050,.F.);+#19050 = EDGE_LOOP('',(#19051,#19052,#19073,#19074));+#19051 = ORIENTED_EDGE('',*,*,#18945,.T.);+#19052 = ORIENTED_EDGE('',*,*,#19053,.F.);+#19053 = EDGE_CURVE('',#18570,#18922,#19054,.T.);+#19054 = SURFACE_CURVE('',#19055,(#19059,#19066),.PCURVE_S1.);+#19055 = LINE('',#19056,#19057);+#19056 = CARTESIAN_POINT('',(3.763569972422,2.72,1.1));+#19057 = VECTOR('',#19058,1.);+#19058 = DIRECTION('',(0.,-1.,0.));+#19059 = PCURVE('',#18614,#19060);+#19060 = DEFINITIONAL_REPRESENTATION('',(#19061),#19065);+#19061 = LINE('',#19062,#19063);+#19062 = CARTESIAN_POINT('',(0.266069972422,0.18));+#19063 = VECTOR('',#19064,1.);+#19064 = DIRECTION('',(0.,-1.));+#19065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19066 = PCURVE('',#18586,#19067);+#19067 = DEFINITIONAL_REPRESENTATION('',(#19068),#19072);+#19068 = LINE('',#19069,#19070);+#19069 = CARTESIAN_POINT('',(0.,0.18));+#19070 = VECTOR('',#19071,1.);+#19071 = DIRECTION('',(0.,-1.));+#19072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#19073 = ORIENTED_EDGE('',*,*,#18598,.F.);+#19074 = ORIENTED_EDGE('',*,*,#19026,.T.);+#19075 = ADVANCED_FACE('',(#19076),#18586,.F.);+#19076 = FACE_BOUND('',#19077,.F.);+#19077 = EDGE_LOOP('',(#19078,#19079,#19100,#19101));+#19078 = ORIENTED_EDGE('',*,*,#18921,.T.);+#19079 = ORIENTED_EDGE('',*,*,#19080,.F.);+#19080 = EDGE_CURVE('',#18542,#18899,#19081,.T.);+#19081 = SURFACE_CURVE('',#19082,(#19086,#19093),.PCURVE_S1.);+#19082 = LINE('',#19083,#19084);+#19083 = CARTESIAN_POINT('',(3.832854330943,2.72,1.059995970601));+#19084 = VECTOR('',#19085,1.);+#19085 = DIRECTION('',(0.,-1.,0.));+#19086 = PCURVE('',#18586,#19087);+#19087 = DEFINITIONAL_REPRESENTATION('',(#19088),#19092);