component
BD9329EFJ-E2
Public Made by Adomby adom
ROHM Semicon DC-DC Converters, HTSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+4402
README.md+78bd9329efj-e2-etched.glbbd9329efj-e2-hero.glbbd9329efj-e2-hero.overlay.json+273bd9329efj-e2.glbbd9329efj-e2.kicad_mod+331bd9329efj-e2.kicad_sym+49bd9329efj-e2.lbr+133bd9329efj-e2.step+3124docs/bd9329efj-e2-datasheet.pdfdocs/hero.pngpackage.json+203page.json+209viewers/footprint.html+1viewers/symbol.html+1README.mdadded+78@@ -0,0 +1,78 @@+# BD9329EFJ-E2++**ROHM Semicon** · DC-DC Converters · HTSOP-8-EP++BD9329EFJ-E2 from ROHM Semicon, in a HTSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BST | input | High-side gate drive boost input, rated at VSW + 7 V maximum, and an R_BS resistor is used to protect against VIN-BST short destruction. |+| 2 | VIN | power_in | Power input with a 4.2 V to 18.0 V operating range (12 V typical) and a 20 V absolute maximum rating, with UVLO at 3.75 V typical on rising VIN. |+| 3 | SW | output | Power switching output driving the inductor, with SW voltage of -0.5 V to 18 V in operation, 20 V absolute maximum, and a switch current limit of 3.5 A minimum. |+| 4 | GND | power_in | Ground reference that must be kept at a minimum potential in all operating conditions, and the exposed thermal pad is to be shorted to it. |+| 5 | FB | input | Feedback input regulated to 0.9 V typical (±1.5% at room temperature, ±2.0% from -25 °C to 85 °C), with an input bias current of 0.02 µA typical. |+| 6 | COMP | passive | Compensation node of the error amplifier, whose voltage is limited by the SS pin voltage during startup. |+| 7 | EN | input | Enable input with a 1.0 V to 1.4 V threshold (1.2 V typical) and a 20 V absolute maximum rating; leaving it open shuts the IC down. |+| 8 | SS | input | Soft-start control input where the soft-start time is TSS = 2.2 × CSS / ISS with ISS of 10 µA typical, giving 22 ms for CSS = 0.1 µF. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ROHM Semicon |+| Package | HTSOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| FB input bias current | IFB | | 0.02 | 2 | µA | | 2 |+| Feedback voltage1 | VFB1 | 0.886 | 0.9 | 0.914 | V | Voltage follower | 2 |+| Feedback voltage2 | VFB2 | 0.882 | 0.9 | 0.918 | V | Ta=-25℃～85℃ | 2 |+| Hi/Lo-side FET Leak current | ILEAKN | | 0 | 10 | µA | VIN= 18V, VSW = 0V / 18V | 2 |+| Switch Current Limit | ILIMIT3 | 3.5 | | | A | | 2 |+| Enable Sink current | IEN | 90 | 180 | 270 | µA | VEN= 12V | 2 |+| Enable Threshold voltage | VEN | 1 | 1.2 | 1.4 | V | | 2 |+| Under Voltage Lockout threshold | VUVLO | 3.5 | 3.75 | 4 | V | VIN rising | 2 |+| Soft Start Current | ISS | 5 | 10 | 15 | µA | VSS= 0 V | 2 |+| Operating Frequency | FOSC | 300 | 380 | 460 | kHz | | 2 |+| Circuit Current | ICC | | 1.2 | 3 | mA | VFB= 1.5V, VEN= 12V | 2 |+| Quiescent Current | IQUI | | 15 | 27 | µA | VEN= 0V | 2 |+| Supply Voltage (operating) | VIN | 4.2 | 12 | 18 | V | | 2 |+| SW Voltage (operating) | VSW | -0.5 | | 18 | V | | 2 |+| Output current | ISW3 | | | 3 | A | | 2 |+| Output voltage range | VRANGE | 0.9 | | | V | | 2 |+| Supply Voltage (absolute maximum) | VIN | | | 20 | V | | 1 |+| Switch Voltage (absolute maximum) | VSW | | | 20 | V | | 1 |+| EN Voltage (absolute maximum) | VEN | | | 20 | V | | 1 |+| All other pins voltage (absolute maximum) | VOTH | | | 20 | V | | 1 |+| Power Dissipation for HTSOP-J8 | Pd | | | 3760 | mW | Mount on 4-layer 70.0mm×70.0mm×1.6mm board; derate 30.08 mW/℃ above Ta≥25℃ | 1 |+| Operating Temperature Range | Topr | -40 | | 85 | ℃ | | 1 |+| Storage Temperature Range | Tstg | -55 | | 150 | ℃ | | 1 |+| Junction Temperature | Tjmax | | | 150 | ℃ | | 1 |+| Package thermal resistance junction-to-ambient | θja | | 29.27 | | ℃/W | Mount on 4-layer 50mm x 30mm x 1.6mm application board | 1 |+| Package thermal resistance junction-to-case | θjc | | 3.75 | | ℃/W | Mount on 4-layer 50mm x 30mm x 1.6mm application board | 1 |++## CAD (KiCad official)++- Symbol: `BD9329EFJ-E2`+- Footprint: `Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm`+- 3D model: HTSOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `bd9329efj-e2-etched.step` / `bd9329efj-e2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bd9329efj-e2.step` / `bd9329efj-e2.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ROHM Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908988910354432) (18 pp, sha256 `85a15b87e8976378`, retrieved 2026-10-19, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bd9329efj-e2-datasheet.pdf)
bd9329efj-e2-etched.glbadded⋯ 1 unchanged line ⋯
bd9329efj-e2-hero.glbadded⋯ 1 unchanged line ⋯
bd9329efj-e2-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "BD9329EFJ-E2",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 7.7,+ "dash_mm": 0.1925,+ "gap_mm": 0.1155,+ "pad_stroke_mm": 0.0462+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.15,+ 3.15,+ -2.115,+ 2.115+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "bd9329efj-e2-etched.glb",+ "glb_sha256": "aad01423802c512366714d0414b66477f37fdf4254f0237a17a052fefd957068",+ "footprint": "bd9329efj-e2.kicad_mod",+ "footprint_sha256": "d8a731c1a96fd8bf44c0a4ba8c1ec3d49a4018cf80c129f4ab9a751110a5a2b1",+ "pins": "page.json component.pins",+ "pins_sha256": "86306e52b7a947d25111b04fe3226c195a9794456c2a22e7eb6e7bd35bc88ae8"+ },+ "generator": "adom-wiki 1.7.74 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "BST",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "VIN",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SW",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "FB",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "COMP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "EN",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "SS",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.65,+ -1.905+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.65,+ -0.635+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.65,+ 0.635+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.65,+ 1.905+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.65,+ 1.905+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.65,+ 0.635+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.65,+ -0.635+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.65,+ -1.905+ ],+ "size_mm": [+ 1.6,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.4,+ 3.2+ ],+ "rot": 0.0+ }+ ]+}
bd9329efj-e2.glbadded⋯ 1 unchanged line ⋯
bd9329efj-e2.kicad_modadded+331@@ -0,0 +1,331 @@+(footprint "HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "HTSOP, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf)")+ (tags "HTSOP SO")+ (property "Reference" "REF**"+ (at 0 -3.4 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm"+ (at 0 3.4 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.06 -2.56)+ (end 2.06 -2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.06 -2.465)+ (end -2.06 -2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.06 2.56)+ (end -2.06 2.465)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.06 -2.56)+ (end 2.06 -2.465)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.06 2.465)+ (end 2.06 2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.06 2.56)+ (end -2.06 2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -2.66 -2.47)+ (xy -2.9 -2.8)+ (xy -2.42 -2.8)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.7 -2.46)+ (end -2.2 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.7 2.46)+ (end -3.7 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 -2.7)+ (end 2.2 -2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 -2.46)+ (end -2.2 -2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 2.46)+ (end -3.7 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 2.7)+ (end -2.2 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 -2.7)+ (end 2.2 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 -2.46)+ (end 3.7 -2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 2.46)+ (end 2.2 2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 2.7)+ (end -2.2 2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.7 -2.46)+ (end 3.7 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.7 2.46)+ (end 2.2 2.46)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.975 -2.45)+ (xy 1.95 -2.45)+ (xy 1.95 2.45)+ (xy -1.95 2.45)+ (xy -1.95 -1.475)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.6 -0.8)+ (size 0.97 1.29)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.6 0.8)+ (size 0.97 1.29)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.6 -0.8)+ (size 0.97 1.29)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.6 0.8)+ (size 0.97 1.29)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -2.65 -1.905)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -2.65 -0.635)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -2.65 0.635)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -2.65 1.905)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at 2.65 1.905)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at 2.65 0.635)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at 2.65 -0.635)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at 2.65 -1.905)+ (size 1.6 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd rect+ (at 0 0)+ (size 2.4 3.2)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
bd9329efj-e2.kicad_symadded+49@@ -0,0 +1,49 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "BD9329EFJ-E2" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 10.16 0) (effects (font (size 1.27 1.27))))+ (property "Value" "BD9329EFJ-E2" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "BD9329EFJ-E2_0_1"+ (rectangle (start -12.70 7.62) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "BD9329EFJ-E2_1_1"+ (pin input line (at -17.78 5.08 0) (length 5.08)+ (name "BST" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "SW" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -5.08 0) (length 5.08)+ (name "FB" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 2.54 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "SS" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "EN" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 -5.08 180) (length 5.08)+ (name "COMP" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
bd9329efj-e2.lbradded+133@@ -0,0 +1,133 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm">+ <description>HTSOP-8-1EP, 3.9 x 4.9 mm, 1.27 mm pitch</description>+ <smd name="1" x="-2.6500" y="1.9050" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="2" x="-2.6500" y="0.6350" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="3" x="-2.6500" y="-0.6350" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="4" x="-2.6500" y="-1.9050" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="5" x="2.6500" y="-1.9050" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="6" x="2.6500" y="-0.6350" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="7" x="2.6500" y="0.6350" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="8" x="2.6500" y="1.9050" dx="1.6000" dy="0.6000" layer="1" roundness="50"/>+ <smd name="9" x="0.0000" y="-0.0000" dx="2.4000" dy="3.2000" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.6600" y="2.4700"/>+ <vertex x="-2.9000" y="2.8000"/>+ <vertex x="-2.4200" y="2.8000"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.9750" y="2.4500"/>+ <vertex x="1.9500" y="2.4500"/>+ <vertex x="1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="1.4750"/>+ </polygon>+ <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>+ <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>+ <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>+ <wire x1="2.0600" y1="2.5600" x2="2.0600" y2="2.4650" width="0.1200" layer="21"/>+ <wire x1="2.0600" y1="-2.4650" x2="2.0600" y2="-2.5600" width="0.1200" layer="21"/>+ <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>+ <text x="0" y="3.305" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-3.305" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="BD9329EFJ-E2">+ <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+ <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="BST" x="-17.78" y="5.08" length="middle" direction="in"/>+ <pin name="VIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="SW" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="FB" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="EP" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="SS" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="EN" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="COMP" x="17.78" y="-5.08" length="middle" direction="pas" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="BD9329EFJ-E2" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="BD9329EFJ-E2" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm">+ <connects>+ <connect gate="G$1" pin="BST" pad="1"/>+ <connect gate="G$1" pin="VIN" pad="2"/>+ <connect gate="G$1" pin="SW" pad="3"/>+ <connect gate="G$1" pin="GND" pad="4"/>+ <connect gate="G$1" pin="FB" pad="5"/>+ <connect gate="G$1" pin="EP" pad="9"/>+ <connect gate="G$1" pin="SS" pad="8"/>+ <connect gate="G$1" pin="EN" pad="7"/>+ <connect gate="G$1" pin="COMP" pad="6"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
bd9329efj-e2.stepadded+3124@@ -0,0 +1,3124 @@+ISO-10303-21;+HEADER;+/* HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm','HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#2895);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#119,#133,#152,#166,#212,#258,#272,#286,#296,#316,#331,#344,#353,#368,#432,#443,#461,#486,#504,#525,#543,#564,#582,#603,#613,#625,#646,#664,#685,#703,#724,#742,#763,#780,#795,#810,#821,#828,#852,#898,#912,#926,#940,#986,#1006,#1037,#1108,#1126,#1179,#1190,#1250,#1267,#1320,#1331,#1391,#1408,#1461,#1469,#1527,#1544,#1592,#1658,#1674,#1722,#1732,#1792,#1808,#1861,#1872,#1932,#1948,#2001,#2012,#2072,#2088,#2139,#2149,#2161,#2173,#2185,#2214,#2223,#2235,#2247,#2259,#2268,#2278,#2285,#2295,#2306,#2316,#2326,#2336,#2346,#2356,#2365,#2375,#2385,#2395,#2405,#2415,#2425,#2435,#2443,#2453,#2463,#2473,#2483,#2493,#2503,#2513,#2521,#2531,#2541,#2551,#2561,#2571,#2581,#2589,#2600,#2609,#2619,#2629,#2639,#2649,#2658,#2668,#2678,#2687,#2697,#2707,#2717,#2727,#2735,#2745,#2755,#2764,#2774,#2784,#2794,#2804,#2812,#2822,#2832,#2841,#2851,#2861,#2871,#2881,#2889));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-1.739363500927,2.378727001854,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(1.739363500927,2.378727001854,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(1.775,2.45,0.55));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-1.775,2.45,0.55));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44,#94),#116,.F.);+#44=FACE_BOUND('',#45,.F.);+#45=EDGE_LOOP('',(#46,#47,#54,#61,#68,#75,#82,#89));+#46=ORIENTED_EDGE('',*,*,#21,.F.);+#47=ORIENTED_EDGE('',*,*,#48,.F.);+#48=EDGE_CURVE('',#49,#22,#51,.T.);+#49=VERTEX_POINT('',#50);+#50=CARTESIAN_POINT('',(-1.878727001854,2.239363500927,0.1));+#51=LINE('',#50,#52);+#52=VECTOR('',#53,1.);+#53=DIRECTION('',(0.707106781187,0.707106781187,0.));+#54=ORIENTED_EDGE('',*,*,#55,.F.);+#55=EDGE_CURVE('',#56,#49,#58,.T.);+#56=VERTEX_POINT('',#57);+#57=CARTESIAN_POINT('',(-1.878727001854,-2.239363500927,0.1));+#58=LINE('',#57,#59);+#59=VECTOR('',#60,1.);+#60=DIRECTION('',(-1.110223024625E-16,1.,0.));+#61=ORIENTED_EDGE('',*,*,#62,.F.);+#62=EDGE_CURVE('',#63,#56,#65,.T.);+#63=VERTEX_POINT('',#64);+#64=CARTESIAN_POINT('',(-1.739363500927,-2.378727001854,0.1));+#65=LINE('',#64,#66);+#66=VECTOR('',#67,1.);+#67=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#68=ORIENTED_EDGE('',*,*,#69,.F.);+#69=EDGE_CURVE('',#70,#63,#72,.T.);+#70=VERTEX_POINT('',#71);+#71=CARTESIAN_POINT('',(1.739363500927,-2.378727001854,0.1));+#72=LINE('',#71,#73);+#73=VECTOR('',#74,1.);+#74=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#75=ORIENTED_EDGE('',*,*,#76,.F.);+#76=EDGE_CURVE('',#77,#70,#79,.T.);+#77=VERTEX_POINT('',#78);+#78=CARTESIAN_POINT('',(1.878727001854,-2.239363500927,0.1));+#79=LINE('',#78,#80);+#80=VECTOR('',#81,1.);+#81=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#82=ORIENTED_EDGE('',*,*,#83,.F.);+#83=EDGE_CURVE('',#84,#77,#86,.T.);+#84=VERTEX_POINT('',#85);+#85=CARTESIAN_POINT('',(1.878727001854,2.239363500927,0.1));+#86=LINE('',#85,#87);+#87=VECTOR('',#88,1.);+#88=DIRECTION('',(1.110223024625E-16,-1.,0.));+#89=ORIENTED_EDGE('',*,*,#90,.F.);+#90=EDGE_CURVE('',#24,#84,#91,.T.);+#91=LINE('',#25,#92);+#92=VECTOR('',#93,1.);+#93=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#94=FACE_BOUND('',#95,.F.);+#95=EDGE_LOOP('',(#96,#103,#108,#113));+#96=ORIENTED_EDGE('',*,*,#97,.T.);+#97=EDGE_CURVE('',#98,#100,#102,.T.);+#98=VERTEX_POINT('',#99);+#99=CARTESIAN_POINT('',(-1.2,1.6,0.1));+#100=VERTEX_POINT('',#101);+#101=CARTESIAN_POINT('',(1.2,1.6,0.1));+#102=LINE('',#99,#27);+#103=ORIENTED_EDGE('',*,*,#104,.T.);+#104=EDGE_CURVE('',#100,#105,#107,.T.);+#105=VERTEX_POINT('',#106);+#106=CARTESIAN_POINT('',(1.2,-1.6,0.1));+#107=LINE('',#101,#87);+#108=ORIENTED_EDGE('',*,*,#109,.F.);+#109=EDGE_CURVE('',#110,#105,#112,.T.);+#110=VERTEX_POINT('',#111);+#111=CARTESIAN_POINT('',(-1.2,-1.6,0.1));+#112=LINE('',#111,#27);+#113=ORIENTED_EDGE('',*,*,#114,.F.);+#114=EDGE_CURVE('',#98,#110,#115,.T.);+#115=LINE('',#99,#87);+#116=PLANE('',#117);+#117=AXIS2_PLACEMENT_3D('',#23,#13,#118);+#118=DIRECTION('',(0.590251715916,-0.807219246461,0.));+#119=ADVANCED_FACE('',(#120),#132,.F.);+#120=FACE_BOUND('',#121,.F.);+#121=EDGE_LOOP('',(#122,#123,#128,#131));+#122=ORIENTED_EDGE('',*,*,#90,.T.);+#123=ORIENTED_EDGE('',*,*,#124,.T.);+#124=EDGE_CURVE('',#84,#125,#127,.T.);+#125=VERTEX_POINT('',#126);+#126=CARTESIAN_POINT('',(1.95,2.275,0.55));+#127=B_SPLINE_CURVE_WITH_KNOTS('',1,(#85,#126),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#128=ORIENTED_EDGE('',*,*,#129,.F.);+#129=EDGE_CURVE('',#31,#125,#130,.T.);+#130=LINE('',#32,#92);+#131=ORIENTED_EDGE('',*,*,#30,.F.);+#132=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#85,#126)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#133=ADVANCED_FACE('',(#134),#150,.F.);+#134=FACE_BOUND('',#135,.F.);+#135=EDGE_LOOP('',(#136,#137,#142,#147));+#136=ORIENTED_EDGE('',*,*,#35,.T.);+#137=ORIENTED_EDGE('',*,*,#138,.T.);+#138=EDGE_CURVE('',#31,#139,#141,.T.);+#139=VERTEX_POINT('',#140);+#140=CARTESIAN_POINT('',(1.775,2.45,0.65));+#141=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#140),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#142=ORIENTED_EDGE('',*,*,#143,.F.);+#143=EDGE_CURVE('',#144,#139,#146,.T.);+#144=VERTEX_POINT('',#145);+#145=CARTESIAN_POINT('',(-1.775,2.45,0.65));+#146=LINE('',#145,#27);+#147=ORIENTED_EDGE('',*,*,#148,.F.);+#148=EDGE_CURVE('',#36,#144,#149,.T.);+#149=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#145),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#150=PLANE('',#151);+#151=AXIS2_PLACEMENT_3D('',#145,#88,#28);+#152=ADVANCED_FACE('',(#153),#165,.F.);+#153=FACE_BOUND('',#154,.F.);+#154=EDGE_LOOP('',(#155,#156,#157,#162));+#155=ORIENTED_EDGE('',*,*,#48,.T.);+#156=ORIENTED_EDGE('',*,*,#40,.T.);+#157=ORIENTED_EDGE('',*,*,#158,.F.);+#158=EDGE_CURVE('',#159,#36,#161,.T.);+#159=VERTEX_POINT('',#160);+#160=CARTESIAN_POINT('',(-1.95,2.275,0.55));+#161=LINE('',#160,#52);+#162=ORIENTED_EDGE('',*,*,#163,.F.);+#163=EDGE_CURVE('',#49,#159,#164,.T.);+#164=B_SPLINE_CURVE_WITH_KNOTS('',1,(#50,#160),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#165=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#50,#160),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#166=ADVANCED_FACE('',(#167),#211,.F.);+#167=FACE_BOUND('',#168,.F.);+#168=EDGE_LOOP('',(#169,#170,#171,#177,#181,#185,#189,#193,#197,#201,#205,#208));+#169=ORIENTED_EDGE('',*,*,#55,.T.);+#170=ORIENTED_EDGE('',*,*,#163,.T.);+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#159,#175,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-1.95,2.115,0.55));+#175=LINE('',#176,#59);+#176=CARTESIAN_POINT('',(-1.95,-2.275,0.55));+#177=ORIENTED_EDGE('',*,*,#178,.F.);+#178=EDGE_CURVE('',#179,#173,#175,.T.);+#179=VERTEX_POINT('',#180);+#180=CARTESIAN_POINT('',(-1.95,1.695,0.55));+#181=ORIENTED_EDGE('',*,*,#182,.F.);+#182=EDGE_CURVE('',#183,#179,#175,.T.);+#183=VERTEX_POINT('',#184);+#184=CARTESIAN_POINT('',(-1.95,0.845,0.55));+#185=ORIENTED_EDGE('',*,*,#186,.F.);+#186=EDGE_CURVE('',#187,#183,#175,.T.);+#187=VERTEX_POINT('',#188);+#188=CARTESIAN_POINT('',(-1.95,0.425,0.55));+#189=ORIENTED_EDGE('',*,*,#190,.F.);+#190=EDGE_CURVE('',#191,#187,#175,.T.);+#191=VERTEX_POINT('',#192);+#192=CARTESIAN_POINT('',(-1.95,-0.425,0.55));+#193=ORIENTED_EDGE('',*,*,#194,.F.);+#194=EDGE_CURVE('',#195,#191,#175,.T.);+#195=VERTEX_POINT('',#196);+#196=CARTESIAN_POINT('',(-1.95,-0.845,0.55));+#197=ORIENTED_EDGE('',*,*,#198,.F.);+#198=EDGE_CURVE('',#199,#195,#175,.T.);+#199=VERTEX_POINT('',#200);+#200=CARTESIAN_POINT('',(-1.95,-1.695,0.55));+#201=ORIENTED_EDGE('',*,*,#202,.F.);+#202=EDGE_CURVE('',#203,#199,#175,.T.);+#203=VERTEX_POINT('',#204);+#204=CARTESIAN_POINT('',(-1.95,-2.115,0.55));+#205=ORIENTED_EDGE('',*,*,#206,.F.);+#206=EDGE_CURVE('',#207,#203,#175,.T.);+#207=VERTEX_POINT('',#176);+#208=ORIENTED_EDGE('',*,*,#209,.F.);+#209=EDGE_CURVE('',#56,#207,#210,.T.);+#210=B_SPLINE_CURVE_WITH_KNOTS('',1,(#57,#176),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#211=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#57,#176),(#50,#160)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#212=ADVANCED_FACE('',(#213),#257,.F.);+#213=FACE_BOUND('',#214,.F.);+#214=EDGE_LOOP('',(#215,#216,#221,#226,#230,#234,#238,#242,#246,#250,#254,#256));+#215=ORIENTED_EDGE('',*,*,#83,.T.);+#216=ORIENTED_EDGE('',*,*,#217,.T.);+#217=EDGE_CURVE('',#77,#218,#220,.T.);+#218=VERTEX_POINT('',#219);+#219=CARTESIAN_POINT('',(1.95,-2.275,0.55));+#220=B_SPLINE_CURVE_WITH_KNOTS('',1,(#78,#219),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#221=ORIENTED_EDGE('',*,*,#222,.F.);+#222=EDGE_CURVE('',#223,#218,#225,.T.);+#223=VERTEX_POINT('',#224);+#224=CARTESIAN_POINT('',(1.95,-2.115,0.55));+#225=LINE('',#126,#87);+#226=ORIENTED_EDGE('',*,*,#227,.F.);+#227=EDGE_CURVE('',#228,#223,#225,.T.);+#228=VERTEX_POINT('',#229);+#229=CARTESIAN_POINT('',(1.95,-1.695,0.55));+#230=ORIENTED_EDGE('',*,*,#231,.F.);+#231=EDGE_CURVE('',#232,#228,#225,.T.);+#232=VERTEX_POINT('',#233);+#233=CARTESIAN_POINT('',(1.95,-0.845,0.55));+#234=ORIENTED_EDGE('',*,*,#235,.F.);+#235=EDGE_CURVE('',#236,#232,#225,.T.);+#236=VERTEX_POINT('',#237);+#237=CARTESIAN_POINT('',(1.95,-0.425,0.55));+#238=ORIENTED_EDGE('',*,*,#239,.F.);+#239=EDGE_CURVE('',#240,#236,#225,.T.);+#240=VERTEX_POINT('',#241);+#241=CARTESIAN_POINT('',(1.95,0.425,0.55));+#242=ORIENTED_EDGE('',*,*,#243,.F.);+#243=EDGE_CURVE('',#244,#240,#225,.T.);+#244=VERTEX_POINT('',#245);+#245=CARTESIAN_POINT('',(1.95,0.845,0.55));+#246=ORIENTED_EDGE('',*,*,#247,.F.);+#247=EDGE_CURVE('',#248,#244,#225,.T.);+#248=VERTEX_POINT('',#249);+#249=CARTESIAN_POINT('',(1.95,1.695,0.55));+#250=ORIENTED_EDGE('',*,*,#251,.F.);+#251=EDGE_CURVE('',#252,#248,#225,.T.);+#252=VERTEX_POINT('',#253);+#253=CARTESIAN_POINT('',(1.95,2.115,0.55));+#254=ORIENTED_EDGE('',*,*,#255,.F.);+#255=EDGE_CURVE('',#125,#252,#225,.T.);+#256=ORIENTED_EDGE('',*,*,#124,.F.);+#257=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#85,#126),(#78,#219)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#258=ADVANCED_FACE('',(#259),#271,.F.);+#259=FACE_BOUND('',#260,.F.);+#260=EDGE_LOOP('',(#261,#262,#263,#268));+#261=ORIENTED_EDGE('',*,*,#62,.T.);+#262=ORIENTED_EDGE('',*,*,#209,.T.);+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#207,#267,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(-1.775,-2.45,0.55));+#267=LINE('',#266,#66);+#268=ORIENTED_EDGE('',*,*,#269,.F.);+#269=EDGE_CURVE('',#63,#265,#270,.T.);+#270=B_SPLINE_CURVE_WITH_KNOTS('',1,(#64,#266),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#271=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#64,#266),(#57,#176)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#272=ADVANCED_FACE('',(#273),#285,.F.);+#273=FACE_BOUND('',#274,.F.);+#274=EDGE_LOOP('',(#275,#276,#281,#284));+#275=ORIENTED_EDGE('',*,*,#76,.T.);+#276=ORIENTED_EDGE('',*,*,#277,.T.);+#277=EDGE_CURVE('',#70,#278,#280,.T.);+#278=VERTEX_POINT('',#279);+#279=CARTESIAN_POINT('',(1.775,-2.45,0.55));+#280=B_SPLINE_CURVE_WITH_KNOTS('',1,(#71,#279),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#281=ORIENTED_EDGE('',*,*,#282,.F.);+#282=EDGE_CURVE('',#218,#278,#283,.T.);+#283=LINE('',#219,#80);+#284=ORIENTED_EDGE('',*,*,#217,.F.);+#285=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#78,#219),(#71,#279)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#286=ADVANCED_FACE('',(#287),#295,.F.);+#287=FACE_BOUND('',#288,.F.);+#288=EDGE_LOOP('',(#289,#290,#291,#294));+#289=ORIENTED_EDGE('',*,*,#69,.T.);+#290=ORIENTED_EDGE('',*,*,#269,.T.);+#291=ORIENTED_EDGE('',*,*,#292,.F.);+#292=EDGE_CURVE('',#278,#265,#293,.T.);+#293=LINE('',#279,#73);+#294=ORIENTED_EDGE('',*,*,#277,.F.);+#295=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#71,#279),(#64,#266)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#296=ADVANCED_FACE('',(#297),#314,.F.);+#297=FACE_BOUND('',#298,.F.);+#298=EDGE_LOOP('',(#299,#305,#310,#313));+#299=ORIENTED_EDGE('',*,*,#300,.F.);+#300=EDGE_CURVE('',#301,#98,#303,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(-1.2,1.6,0.));+#303=LINE('',#302,#304);+#304=VECTOR('',#13,1.);+#305=ORIENTED_EDGE('',*,*,#306,.T.);+#306=EDGE_CURVE('',#301,#307,#309,.T.);+#307=VERTEX_POINT('',#308);+#308=CARTESIAN_POINT('',(1.2,1.6,0.));+#309=LINE('',#302,#27);+#310=ORIENTED_EDGE('',*,*,#311,.T.);+#311=EDGE_CURVE('',#307,#100,#312,.T.);+#312=LINE('',#308,#304);+#313=ORIENTED_EDGE('',*,*,#97,.F.);+#314=PLANE('',#315);+#315=AXIS2_PLACEMENT_3D('',#302,#88,#13);+#316=ADVANCED_FACE('',(#317),#329,.F.);+#317=FACE_BOUND('',#318,.F.);+#318=EDGE_LOOP('',(#319,#324,#325,#326));+#319=ORIENTED_EDGE('',*,*,#320,.F.);+#320=EDGE_CURVE('',#301,#321,#323,.T.);+#321=VERTEX_POINT('',#322);+#322=CARTESIAN_POINT('',(-1.2,-1.6,0.));+#323=LINE('',#302,#87);+#324=ORIENTED_EDGE('',*,*,#300,.T.);+#325=ORIENTED_EDGE('',*,*,#114,.T.);+#326=ORIENTED_EDGE('',*,*,#327,.F.);+#327=EDGE_CURVE('',#321,#110,#328,.T.);+#328=LINE('',#322,#304);+#329=PLANE('',#330);+#330=AXIS2_PLACEMENT_3D('',#302,#28,#13);+#331=ADVANCED_FACE('',(#332),#342,.T.);+#332=FACE_BOUND('',#333,.T.);+#333=EDGE_LOOP('',(#326,#334,#339,#108));+#334=ORIENTED_EDGE('',*,*,#335,.T.);+#335=EDGE_CURVE('',#321,#336,#338,.T.);+#336=VERTEX_POINT('',#337);+#337=CARTESIAN_POINT('',(1.2,-1.6,0.));+#338=LINE('',#322,#27);+#339=ORIENTED_EDGE('',*,*,#340,.T.);+#340=EDGE_CURVE('',#336,#105,#341,.T.);+#341=LINE('',#337,#304);+#342=PLANE('',#343);+#343=AXIS2_PLACEMENT_3D('',#322,#88,#13);+#344=ADVANCED_FACE('',(#345),#351,.T.);+#345=FACE_BOUND('',#346,.T.);+#346=EDGE_LOOP('',(#347,#310,#103,#350));+#347=ORIENTED_EDGE('',*,*,#348,.F.);+#348=EDGE_CURVE('',#307,#336,#349,.T.);+#349=LINE('',#308,#87);+#350=ORIENTED_EDGE('',*,*,#340,.F.);+#351=PLANE('',#352);+#352=AXIS2_PLACEMENT_3D('',#308,#28,#13);+#353=ADVANCED_FACE('',(#354),#366,.F.);+#354=FACE_BOUND('',#355,.F.);+#355=EDGE_LOOP('',(#356,#357,#362,#365));+#356=ORIENTED_EDGE('',*,*,#129,.T.);+#357=ORIENTED_EDGE('',*,*,#358,.T.);+#358=EDGE_CURVE('',#125,#359,#361,.T.);+#359=VERTEX_POINT('',#360);+#360=CARTESIAN_POINT('',(1.95,2.275,0.65));+#361=B_SPLINE_CURVE_WITH_KNOTS('',1,(#126,#360),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#362=ORIENTED_EDGE('',*,*,#363,.F.);+#363=EDGE_CURVE('',#139,#359,#364,.T.);+#364=LINE('',#140,#92);+#365=ORIENTED_EDGE('',*,*,#138,.F.);+#366=PLANE('',#367);+#367=AXIS2_PLACEMENT_3D('',#140,#81,#93);+#368=ADVANCED_FACE('',(#369),#427,.F.);+#369=FACE_BOUND('',#370,.F.);+#370=EDGE_LOOP('',(#371,#376,#377,#378,#383,#389,#394,#399,#404,#409,#415,#423));+#371=ORIENTED_EDGE('',*,*,#372,.T.);+#372=EDGE_CURVE('',#373,#144,#375,.T.);+#373=VERTEX_POINT('',#374);+#374=CARTESIAN_POINT('',(-1.95,2.275,0.65));+#375=LINE('',#374,#52);+#376=ORIENTED_EDGE('',*,*,#143,.T.);+#377=ORIENTED_EDGE('',*,*,#363,.T.);+#378=ORIENTED_EDGE('',*,*,#379,.T.);+#379=EDGE_CURVE('',#359,#380,#382,.T.);+#380=VERTEX_POINT('',#381);+#381=CARTESIAN_POINT('',(1.95,2.115,0.65));+#382=LINE('',#360,#87);+#383=ORIENTED_EDGE('',*,*,#384,.T.);+#384=EDGE_CURVE('',#380,#385,#387,.T.);+#385=VERTEX_POINT('',#386);+#386=CARTESIAN_POINT('',(1.875,2.115,0.65));+#387=LINE('',#388,#73);+#388=CARTESIAN_POINT('',(2.05,2.115,0.65));+#389=ORIENTED_EDGE('',*,*,#390,.F.);+#390=EDGE_CURVE('',#391,#385,#393,.T.);+#391=VERTEX_POINT('',#392);+#392=CARTESIAN_POINT('',(1.875,2.2375,0.65));+#393=LINE('',#392,#87);+#394=ORIENTED_EDGE('',*,*,#395,.F.);+#395=EDGE_CURVE('',#396,#391,#398,.T.);+#396=VERTEX_POINT('',#397);+#397=CARTESIAN_POINT('',(1.7375,2.375,0.65));+#398=LINE('',#397,#92);+#399=ORIENTED_EDGE('',*,*,#400,.F.);+#400=EDGE_CURVE('',#401,#396,#403,.T.);+#401=VERTEX_POINT('',#402);+#402=CARTESIAN_POINT('',(-1.7375,2.375,0.65));+#403=LINE('',#402,#27);+#404=ORIENTED_EDGE('',*,*,#405,.F.);+#405=EDGE_CURVE('',#406,#401,#408,.T.);+#406=VERTEX_POINT('',#407);+#407=CARTESIAN_POINT('',(-1.875,2.2375,0.65));+#408=LINE('',#407,#52);+#409=ORIENTED_EDGE('',*,*,#410,.F.);+#410=EDGE_CURVE('',#411,#406,#413,.T.);+#411=VERTEX_POINT('',#412);+#412=CARTESIAN_POINT('',(-1.875,2.115,0.65));+#413=LINE('',#414,#59);+#414=CARTESIAN_POINT('',(-1.875,-2.2375,0.65));+#415=ORIENTED_EDGE('',*,*,#416,.F.);+#416=EDGE_CURVE('',#417,#411,#419,.T.);+#417=VERTEX_POINT('',#418);+#418=CARTESIAN_POINT('',(-1.95,2.115,0.65));+#419=LINE('',#420,#421);+#420=CARTESIAN_POINT('',(-2.05,2.115,0.65));+#421=VECTOR('',#422,1.);+#422=DIRECTION('',(1.,-1.144237745222E-17,0.));+#423=ORIENTED_EDGE('',*,*,#424,.T.);+#424=EDGE_CURVE('',#417,#373,#425,.T.);+#425=LINE('',#426,#59);+#426=CARTESIAN_POINT('',(-1.95,-2.275,0.65));+#427=PLANE('',#428);+#428=AXIS2_PLACEMENT_3D('',#429,#430,#431);+#429=CARTESIAN_POINT('',(-3.027078129022E-16,2.4125,0.65));+#430=DIRECTION('',(5.746605807844E-18,-7.012113989679E-28,-1.));+#431=DIRECTION('',(1.,1.112083013911E-16,5.746605807844E-18));+#432=ADVANCED_FACE('',(#433),#441,.F.);+#433=FACE_BOUND('',#434,.F.);+#434=EDGE_LOOP('',(#435,#436,#437,#438));+#435=ORIENTED_EDGE('',*,*,#158,.T.);+#436=ORIENTED_EDGE('',*,*,#148,.T.);+#437=ORIENTED_EDGE('',*,*,#372,.F.);+#438=ORIENTED_EDGE('',*,*,#439,.F.);+#439=EDGE_CURVE('',#159,#373,#440,.T.);+#440=B_SPLINE_CURVE_WITH_KNOTS('',1,(#160,#374),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#441=PLANE('',#442);+#442=AXIS2_PLACEMENT_3D('',#374,#93,#53);+#443=ADVANCED_FACE('',(#444),#459,.F.);+#444=FACE_BOUND('',#445,.F.);+#445=EDGE_LOOP('',(#446,#450,#451,#457));+#446=ORIENTED_EDGE('',*,*,#447,.F.);+#447=EDGE_CURVE('',#207,#448,#449,.T.);+#448=VERTEX_POINT('',#426);+#449=B_SPLINE_CURVE_WITH_KNOTS('',1,(#176,#426),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#450=ORIENTED_EDGE('',*,*,#206,.T.);+#451=ORIENTED_EDGE('',*,*,#452,.T.);+#452=EDGE_CURVE('',#203,#453,#455,.T.);+#453=VERTEX_POINT('',#454);+#454=CARTESIAN_POINT('',(-1.95,-2.115,0.65));+#455=LINE('',#456,#304);+#456=CARTESIAN_POINT('',(-1.95,-2.115,0.449424845133));+#457=ORIENTED_EDGE('',*,*,#458,.F.);+#458=EDGE_CURVE('',#448,#453,#425,.T.);+#459=PLANE('',#460);+#460=AXIS2_PLACEMENT_3D('',#426,#28,#60);+#461=ADVANCED_FACE('',(#462),#484,.F.);+#462=FACE_BOUND('',#463,.F.);+#463=EDGE_LOOP('',(#464,#472,#473,#479));+#464=ORIENTED_EDGE('',*,*,#465,.F.);+#465=EDGE_CURVE('',#203,#466,#468,.T.);+#466=VERTEX_POINT('',#467);+#467=CARTESIAN_POINT('',(-2.05,-2.115,0.55));+#468=LINE('',#469,#470);+#469=CARTESIAN_POINT('',(-1.8,-2.115,0.55));+#470=VECTOR('',#471,1.);+#471=DIRECTION('',(-1.,1.144237745222E-17,0.));+#472=ORIENTED_EDGE('',*,*,#202,.T.);+#473=ORIENTED_EDGE('',*,*,#474,.T.);+#474=EDGE_CURVE('',#199,#475,#477,.T.);+#475=VERTEX_POINT('',#476);+#476=CARTESIAN_POINT('',(-2.05,-1.695,0.55));+#477=LINE('',#478,#470);+#478=CARTESIAN_POINT('',(-1.8,-1.695,0.55));+#479=ORIENTED_EDGE('',*,*,#480,.F.);+#480=EDGE_CURVE('',#466,#475,#481,.T.);+#481=LINE('',#467,#482);+#482=VECTOR('',#483,1.);+#483=DIRECTION('',(1.144237745222E-17,1.,0.));+#484=PLANE('',#485);+#485=AXIS2_PLACEMENT_3D('',#469,#13,#471);+#486=ADVANCED_FACE('',(#487),#459,.F.);+#487=FACE_BOUND('',#488,.F.);+#488=EDGE_LOOP('',(#489,#495,#496,#502));+#489=ORIENTED_EDGE('',*,*,#490,.F.);+#490=EDGE_CURVE('',#199,#491,#493,.T.);+#491=VERTEX_POINT('',#492);+#492=CARTESIAN_POINT('',(-1.95,-1.695,0.65));+#493=LINE('',#494,#304);+#494=CARTESIAN_POINT('',(-1.95,-1.695,0.449424845133));+#495=ORIENTED_EDGE('',*,*,#198,.T.);+#496=ORIENTED_EDGE('',*,*,#497,.T.);+#497=EDGE_CURVE('',#195,#498,#500,.T.);+#498=VERTEX_POINT('',#499);+#499=CARTESIAN_POINT('',(-1.95,-0.845,0.65));+#500=LINE('',#501,#304);+#501=CARTESIAN_POINT('',(-1.95,-0.845,0.449424845133));+#502=ORIENTED_EDGE('',*,*,#503,.F.);+#503=EDGE_CURVE('',#491,#498,#425,.T.);+#504=ADVANCED_FACE('',(#505),#523,.F.);+#505=FACE_BOUND('',#506,.F.);+#506=EDGE_LOOP('',(#507,#513,#514,#520));+#507=ORIENTED_EDGE('',*,*,#508,.F.);+#508=EDGE_CURVE('',#195,#509,#511,.T.);+#509=VERTEX_POINT('',#510);+#510=CARTESIAN_POINT('',(-2.05,-0.845,0.55));+#511=LINE('',#512,#470);+#512=CARTESIAN_POINT('',(-1.8,-0.845,0.55));+#513=ORIENTED_EDGE('',*,*,#194,.T.);+#514=ORIENTED_EDGE('',*,*,#515,.T.);+#515=EDGE_CURVE('',#191,#516,#518,.T.);+#516=VERTEX_POINT('',#517);+#517=CARTESIAN_POINT('',(-2.05,-0.425,0.55));+#518=LINE('',#519,#470);+#519=CARTESIAN_POINT('',(-1.8,-0.425,0.55));+#520=ORIENTED_EDGE('',*,*,#521,.F.);+#521=EDGE_CURVE('',#509,#516,#522,.T.);+#522=LINE('',#510,#482);+#523=PLANE('',#524);+#524=AXIS2_PLACEMENT_3D('',#512,#13,#471);+#525=ADVANCED_FACE('',(#526),#459,.F.);+#526=FACE_BOUND('',#527,.F.);+#527=EDGE_LOOP('',(#528,#534,#535,#541));+#528=ORIENTED_EDGE('',*,*,#529,.F.);+#529=EDGE_CURVE('',#191,#530,#532,.T.);+#530=VERTEX_POINT('',#531);+#531=CARTESIAN_POINT('',(-1.95,-0.425,0.65));+#532=LINE('',#533,#304);+#533=CARTESIAN_POINT('',(-1.95,-0.425,0.449424845133));+#534=ORIENTED_EDGE('',*,*,#190,.T.);+#535=ORIENTED_EDGE('',*,*,#536,.T.);+#536=EDGE_CURVE('',#187,#537,#539,.T.);+#537=VERTEX_POINT('',#538);+#538=CARTESIAN_POINT('',(-1.95,0.425,0.65));+#539=LINE('',#540,#304);+#540=CARTESIAN_POINT('',(-1.95,0.425,0.449424845133));+#541=ORIENTED_EDGE('',*,*,#542,.F.);+#542=EDGE_CURVE('',#530,#537,#425,.T.);+#543=ADVANCED_FACE('',(#544),#562,.F.);+#544=FACE_BOUND('',#545,.F.);+#545=EDGE_LOOP('',(#546,#552,#553,#559));+#546=ORIENTED_EDGE('',*,*,#547,.F.);+#547=EDGE_CURVE('',#187,#548,#550,.T.);+#548=VERTEX_POINT('',#549);+#549=CARTESIAN_POINT('',(-2.05,0.425,0.55));+#550=LINE('',#551,#470);+#551=CARTESIAN_POINT('',(-1.8,0.425,0.55));+#552=ORIENTED_EDGE('',*,*,#186,.T.);+#553=ORIENTED_EDGE('',*,*,#554,.T.);+#554=EDGE_CURVE('',#183,#555,#557,.T.);+#555=VERTEX_POINT('',#556);+#556=CARTESIAN_POINT('',(-2.05,0.845,0.55));+#557=LINE('',#558,#470);+#558=CARTESIAN_POINT('',(-1.8,0.845,0.55));+#559=ORIENTED_EDGE('',*,*,#560,.F.);+#560=EDGE_CURVE('',#548,#555,#561,.T.);+#561=LINE('',#549,#482);+#562=PLANE('',#563);+#563=AXIS2_PLACEMENT_3D('',#551,#13,#471);+#564=ADVANCED_FACE('',(#565),#459,.F.);+#565=FACE_BOUND('',#566,.F.);+#566=EDGE_LOOP('',(#567,#573,#574,#580));+#567=ORIENTED_EDGE('',*,*,#568,.F.);+#568=EDGE_CURVE('',#183,#569,#571,.T.);+#569=VERTEX_POINT('',#570);+#570=CARTESIAN_POINT('',(-1.95,0.845,0.65));+#571=LINE('',#572,#304);+#572=CARTESIAN_POINT('',(-1.95,0.845,0.449424845133));+#573=ORIENTED_EDGE('',*,*,#182,.T.);+#574=ORIENTED_EDGE('',*,*,#575,.T.);+#575=EDGE_CURVE('',#179,#576,#578,.T.);+#576=VERTEX_POINT('',#577);+#577=CARTESIAN_POINT('',(-1.95,1.695,0.65));+#578=LINE('',#579,#304);+#579=CARTESIAN_POINT('',(-1.95,1.695,0.449424845133));+#580=ORIENTED_EDGE('',*,*,#581,.F.);+#581=EDGE_CURVE('',#569,#576,#425,.T.);+#582=ADVANCED_FACE('',(#583),#601,.F.);+#583=FACE_BOUND('',#584,.F.);+#584=EDGE_LOOP('',(#585,#591,#592,#598));+#585=ORIENTED_EDGE('',*,*,#586,.F.);+#586=EDGE_CURVE('',#179,#587,#589,.T.);+#587=VERTEX_POINT('',#588);+#588=CARTESIAN_POINT('',(-2.05,1.695,0.55));+#589=LINE('',#590,#470);+#590=CARTESIAN_POINT('',(-1.8,1.695,0.55));+#591=ORIENTED_EDGE('',*,*,#178,.T.);+#592=ORIENTED_EDGE('',*,*,#593,.T.);+#593=EDGE_CURVE('',#173,#594,#596,.T.);+#594=VERTEX_POINT('',#595);+#595=CARTESIAN_POINT('',(-2.05,2.115,0.55));+#596=LINE('',#597,#470);+#597=CARTESIAN_POINT('',(-1.8,2.115,0.55));+#598=ORIENTED_EDGE('',*,*,#599,.F.);+#599=EDGE_CURVE('',#587,#594,#600,.T.);+#600=LINE('',#588,#482);+#601=PLANE('',#602);+#602=AXIS2_PLACEMENT_3D('',#590,#13,#471);+#603=ADVANCED_FACE('',(#604),#459,.F.);+#604=FACE_BOUND('',#605,.F.);+#605=EDGE_LOOP('',(#606,#610,#611,#612));+#606=ORIENTED_EDGE('',*,*,#607,.F.);+#607=EDGE_CURVE('',#173,#417,#608,.T.);+#608=LINE('',#609,#304);+#609=CARTESIAN_POINT('',(-1.95,2.115,0.449424845133));+#610=ORIENTED_EDGE('',*,*,#172,.T.);+#611=ORIENTED_EDGE('',*,*,#439,.T.);+#612=ORIENTED_EDGE('',*,*,#424,.F.);+#613=ADVANCED_FACE('',(#614),#623,.F.);+#614=FACE_BOUND('',#615,.F.);+#615=EDGE_LOOP('',(#616,#617,#618,#622));+#616=ORIENTED_EDGE('',*,*,#358,.F.);+#617=ORIENTED_EDGE('',*,*,#255,.T.);+#618=ORIENTED_EDGE('',*,*,#619,.T.);+#619=EDGE_CURVE('',#252,#380,#620,.T.);+#620=LINE('',#621,#304);+#621=CARTESIAN_POINT('',(1.95,2.115,0.449424845133));+#622=ORIENTED_EDGE('',*,*,#379,.F.);+#623=PLANE('',#624);+#624=AXIS2_PLACEMENT_3D('',#360,#74,#88);+#625=ADVANCED_FACE('',(#626),#644,.F.);+#626=FACE_BOUND('',#627,.F.);+#627=EDGE_LOOP('',(#628,#634,#635,#641));+#628=ORIENTED_EDGE('',*,*,#629,.F.);+#629=EDGE_CURVE('',#252,#630,#632,.T.);+#630=VERTEX_POINT('',#631);+#631=CARTESIAN_POINT('',(2.05,2.115,0.55));+#632=LINE('',#633,#27);+#633=CARTESIAN_POINT('',(1.8,2.115,0.55));+#634=ORIENTED_EDGE('',*,*,#251,.T.);+#635=ORIENTED_EDGE('',*,*,#636,.T.);+#636=EDGE_CURVE('',#248,#637,#639,.T.);+#637=VERTEX_POINT('',#638);+#638=CARTESIAN_POINT('',(2.05,1.695,0.55));+#639=LINE('',#640,#27);+#640=CARTESIAN_POINT('',(1.8,1.695,0.55));+#641=ORIENTED_EDGE('',*,*,#642,.F.);+#642=EDGE_CURVE('',#630,#637,#643,.T.);+#643=LINE('',#631,#87);+#644=PLANE('',#645);+#645=AXIS2_PLACEMENT_3D('',#633,#13,#28);+#646=ADVANCED_FACE('',(#647),#623,.F.);+#647=FACE_BOUND('',#648,.F.);+#648=EDGE_LOOP('',(#649,#655,#656,#662));+#649=ORIENTED_EDGE('',*,*,#650,.F.);+#650=EDGE_CURVE('',#248,#651,#653,.T.);+#651=VERTEX_POINT('',#652);+#652=CARTESIAN_POINT('',(1.95,1.695,0.65));+#653=LINE('',#654,#304);+#654=CARTESIAN_POINT('',(1.95,1.695,0.449424845133));+#655=ORIENTED_EDGE('',*,*,#247,.T.);+#656=ORIENTED_EDGE('',*,*,#657,.T.);+#657=EDGE_CURVE('',#244,#658,#660,.T.);+#658=VERTEX_POINT('',#659);+#659=CARTESIAN_POINT('',(1.95,0.845,0.65));+#660=LINE('',#661,#304);+#661=CARTESIAN_POINT('',(1.95,0.845,0.449424845133));+#662=ORIENTED_EDGE('',*,*,#663,.F.);+#663=EDGE_CURVE('',#651,#658,#382,.T.);+#664=ADVANCED_FACE('',(#665),#683,.F.);+#665=FACE_BOUND('',#666,.F.);+#666=EDGE_LOOP('',(#667,#673,#674,#680));+#667=ORIENTED_EDGE('',*,*,#668,.F.);+#668=EDGE_CURVE('',#244,#669,#671,.T.);+#669=VERTEX_POINT('',#670);+#670=CARTESIAN_POINT('',(2.05,0.845,0.55));+#671=LINE('',#672,#27);+#672=CARTESIAN_POINT('',(1.8,0.845,0.55));+#673=ORIENTED_EDGE('',*,*,#243,.T.);+#674=ORIENTED_EDGE('',*,*,#675,.T.);+#675=EDGE_CURVE('',#240,#676,#678,.T.);+#676=VERTEX_POINT('',#677);+#677=CARTESIAN_POINT('',(2.05,0.425,0.55));+#678=LINE('',#679,#27);+#679=CARTESIAN_POINT('',(1.8,0.425,0.55));+#680=ORIENTED_EDGE('',*,*,#681,.F.);+#681=EDGE_CURVE('',#669,#676,#682,.T.);+#682=LINE('',#670,#87);+#683=PLANE('',#684);+#684=AXIS2_PLACEMENT_3D('',#672,#13,#28);+#685=ADVANCED_FACE('',(#686),#623,.F.);+#686=FACE_BOUND('',#687,.F.);+#687=EDGE_LOOP('',(#688,#694,#695,#701));+#688=ORIENTED_EDGE('',*,*,#689,.F.);+#689=EDGE_CURVE('',#240,#690,#692,.T.);+#690=VERTEX_POINT('',#691);+#691=CARTESIAN_POINT('',(1.95,0.425,0.65));+#692=LINE('',#693,#304);+#693=CARTESIAN_POINT('',(1.95,0.425,0.449424845133));+#694=ORIENTED_EDGE('',*,*,#239,.T.);+#695=ORIENTED_EDGE('',*,*,#696,.T.);+#696=EDGE_CURVE('',#236,#697,#699,.T.);+#697=VERTEX_POINT('',#698);+#698=CARTESIAN_POINT('',(1.95,-0.425,0.65));+#699=LINE('',#700,#304);+#700=CARTESIAN_POINT('',(1.95,-0.425,0.449424845133));+#701=ORIENTED_EDGE('',*,*,#702,.F.);+#702=EDGE_CURVE('',#690,#697,#382,.T.);+#703=ADVANCED_FACE('',(#704),#722,.F.);+#704=FACE_BOUND('',#705,.F.);+#705=EDGE_LOOP('',(#706,#712,#713,#719));+#706=ORIENTED_EDGE('',*,*,#707,.F.);+#707=EDGE_CURVE('',#236,#708,#710,.T.);+#708=VERTEX_POINT('',#709);+#709=CARTESIAN_POINT('',(2.05,-0.425,0.55));+#710=LINE('',#711,#27);+#711=CARTESIAN_POINT('',(1.8,-0.425,0.55));+#712=ORIENTED_EDGE('',*,*,#235,.T.);+#713=ORIENTED_EDGE('',*,*,#714,.T.);+#714=EDGE_CURVE('',#232,#715,#717,.T.);+#715=VERTEX_POINT('',#716);+#716=CARTESIAN_POINT('',(2.05,-0.845,0.55));+#717=LINE('',#718,#27);+#718=CARTESIAN_POINT('',(1.8,-0.845,0.55));+#719=ORIENTED_EDGE('',*,*,#720,.F.);+#720=EDGE_CURVE('',#708,#715,#721,.T.);+#721=LINE('',#709,#87);+#722=PLANE('',#723);+#723=AXIS2_PLACEMENT_3D('',#711,#13,#28);+#724=ADVANCED_FACE('',(#725),#623,.F.);+#725=FACE_BOUND('',#726,.F.);+#726=EDGE_LOOP('',(#727,#733,#734,#740));+#727=ORIENTED_EDGE('',*,*,#728,.F.);+#728=EDGE_CURVE('',#232,#729,#731,.T.);+#729=VERTEX_POINT('',#730);+#730=CARTESIAN_POINT('',(1.95,-0.845,0.65));+#731=LINE('',#732,#304);+#732=CARTESIAN_POINT('',(1.95,-0.845,0.449424845133));+#733=ORIENTED_EDGE('',*,*,#231,.T.);+#734=ORIENTED_EDGE('',*,*,#735,.T.);+#735=EDGE_CURVE('',#228,#736,#738,.T.);+#736=VERTEX_POINT('',#737);+#737=CARTESIAN_POINT('',(1.95,-1.695,0.65));+#738=LINE('',#739,#304);+#739=CARTESIAN_POINT('',(1.95,-1.695,0.449424845133));+#740=ORIENTED_EDGE('',*,*,#741,.F.);+#741=EDGE_CURVE('',#729,#736,#382,.T.);+#742=ADVANCED_FACE('',(#743),#761,.F.);+#743=FACE_BOUND('',#744,.F.);+#744=EDGE_LOOP('',(#745,#751,#752,#758));+#745=ORIENTED_EDGE('',*,*,#746,.F.);+#746=EDGE_CURVE('',#228,#747,#749,.T.);+#747=VERTEX_POINT('',#748);+#748=CARTESIAN_POINT('',(2.05,-1.695,0.55));+#749=LINE('',#750,#27);+#750=CARTESIAN_POINT('',(1.8,-1.695,0.55));+#751=ORIENTED_EDGE('',*,*,#227,.T.);+#752=ORIENTED_EDGE('',*,*,#753,.T.);+#753=EDGE_CURVE('',#223,#754,#756,.T.);+#754=VERTEX_POINT('',#755);+#755=CARTESIAN_POINT('',(2.05,-2.115,0.55));+#756=LINE('',#757,#27);+#757=CARTESIAN_POINT('',(1.8,-2.115,0.55));+#758=ORIENTED_EDGE('',*,*,#759,.F.);+#759=EDGE_CURVE('',#747,#754,#760,.T.);+#760=LINE('',#748,#87);+#761=PLANE('',#762);+#762=AXIS2_PLACEMENT_3D('',#750,#13,#28);+#763=ADVANCED_FACE('',(#764),#623,.F.);+#764=FACE_BOUND('',#765,.F.);+#765=EDGE_LOOP('',(#766,#772,#773,#778));+#766=ORIENTED_EDGE('',*,*,#767,.F.);+#767=EDGE_CURVE('',#223,#768,#770,.T.);+#768=VERTEX_POINT('',#769);+#769=CARTESIAN_POINT('',(1.95,-2.115,0.65));+#770=LINE('',#771,#304);+#771=CARTESIAN_POINT('',(1.95,-2.115,0.449424845133));+#772=ORIENTED_EDGE('',*,*,#222,.T.);+#773=ORIENTED_EDGE('',*,*,#774,.T.);+#774=EDGE_CURVE('',#218,#775,#777,.T.);+#775=VERTEX_POINT('',#776);+#776=CARTESIAN_POINT('',(1.95,-2.275,0.65));+#777=B_SPLINE_CURVE_WITH_KNOTS('',1,(#219,#776),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#778=ORIENTED_EDGE('',*,*,#779,.F.);+#779=EDGE_CURVE('',#768,#775,#382,.T.);+#780=ADVANCED_FACE('',(#781),#793,.F.);+#781=FACE_BOUND('',#782,.F.);+#782=EDGE_LOOP('',(#783,#784,#785,#790));+#783=ORIENTED_EDGE('',*,*,#264,.T.);+#784=ORIENTED_EDGE('',*,*,#447,.T.);+#785=ORIENTED_EDGE('',*,*,#786,.F.);+#786=EDGE_CURVE('',#787,#448,#789,.T.);+#787=VERTEX_POINT('',#788);+#788=CARTESIAN_POINT('',(-1.775,-2.45,0.65));+#789=LINE('',#788,#66);+#790=ORIENTED_EDGE('',*,*,#791,.F.);+#791=EDGE_CURVE('',#265,#787,#792,.T.);+#792=B_SPLINE_CURVE_WITH_KNOTS('',1,(#266,#788),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#793=PLANE('',#794);+#794=AXIS2_PLACEMENT_3D('',#788,#53,#67);+#795=ADVANCED_FACE('',(#796),#808,.F.);+#796=FACE_BOUND('',#797,.F.);+#797=EDGE_LOOP('',(#798,#799,#804,#807));+#798=ORIENTED_EDGE('',*,*,#282,.T.);+#799=ORIENTED_EDGE('',*,*,#800,.T.);+#800=EDGE_CURVE('',#278,#801,#803,.T.);+#801=VERTEX_POINT('',#802);+#802=CARTESIAN_POINT('',(1.775,-2.45,0.65));+#803=B_SPLINE_CURVE_WITH_KNOTS('',1,(#279,#802),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#804=ORIENTED_EDGE('',*,*,#805,.F.);+#805=EDGE_CURVE('',#775,#801,#806,.T.);+#806=LINE('',#776,#80);+#807=ORIENTED_EDGE('',*,*,#774,.F.);+#808=PLANE('',#809);+#809=AXIS2_PLACEMENT_3D('',#776,#67,#81);+#810=ADVANCED_FACE('',(#811),#819,.F.);+#811=FACE_BOUND('',#812,.F.);+#812=EDGE_LOOP('',(#813,#814,#815,#818));+#813=ORIENTED_EDGE('',*,*,#292,.T.);+#814=ORIENTED_EDGE('',*,*,#791,.T.);+#815=ORIENTED_EDGE('',*,*,#816,.F.);+#816=EDGE_CURVE('',#801,#787,#817,.T.);+#817=LINE('',#802,#73);+#818=ORIENTED_EDGE('',*,*,#800,.F.);+#819=PLANE('',#820);+#820=AXIS2_PLACEMENT_3D('',#802,#60,#74);+#821=ADVANCED_FACE('',(#822),#826,.F.);+#822=FACE_BOUND('',#823,.F.);+#823=EDGE_LOOP('',(#824,#825,#334,#347));+#824=ORIENTED_EDGE('',*,*,#306,.F.);+#825=ORIENTED_EDGE('',*,*,#320,.T.);+#826=PLANE('',#827);+#827=AXIS2_PLACEMENT_3D('',#302,#13,#88);+#828=ADVANCED_FACE('',(#829),#849,.F.);+#829=FACE_BOUND('',#830,.F.);+#830=EDGE_LOOP('',(#831,#836,#840,#842,#843,#847));+#831=ORIENTED_EDGE('',*,*,#832,.F.);+#832=EDGE_CURVE('',#833,#576,#835,.T.);+#833=VERTEX_POINT('',#834);+#834=CARTESIAN_POINT('',(-2.05,1.695,0.65));+#835=LINE('',#834,#421);+#836=ORIENTED_EDGE('',*,*,#837,.T.);+#837=EDGE_CURVE('',#833,#838,#839,.T.);+#838=VERTEX_POINT('',#420);+#839=LINE('',#834,#482);+#840=ORIENTED_EDGE('',*,*,#841,.T.);+#841=EDGE_CURVE('',#838,#417,#419,.T.);+#842=ORIENTED_EDGE('',*,*,#416,.T.);+#843=ORIENTED_EDGE('',*,*,#844,.F.);+#844=EDGE_CURVE('',#845,#411,#413,.T.);+#845=VERTEX_POINT('',#846);+#846=CARTESIAN_POINT('',(-1.875,1.695,0.65));+#847=ORIENTED_EDGE('',*,*,#848,.F.);+#848=EDGE_CURVE('',#576,#845,#835,.T.);+#849=PLANE('',#850);+#850=AXIS2_PLACEMENT_3D('',#834,#851,#422);+#851=DIRECTION('',(0.,0.,-1.));+#852=ADVANCED_FACE('',(#853),#897,.F.);+#853=FACE_BOUND('',#854,.F.);+#854=EDGE_LOOP('',(#855,#860,#864,#868,#872,#876,#880,#882,#883,#884,#889,#894));+#855=ORIENTED_EDGE('',*,*,#856,.T.);+#856=EDGE_CURVE('',#857,#858,#413,.T.);+#857=VERTEX_POINT('',#414);+#858=VERTEX_POINT('',#859);+#859=CARTESIAN_POINT('',(-1.875,-2.115,0.65));+#860=ORIENTED_EDGE('',*,*,#861,.T.);+#861=EDGE_CURVE('',#858,#862,#413,.T.);+#862=VERTEX_POINT('',#863);+#863=CARTESIAN_POINT('',(-1.875,-1.695,0.65));+#864=ORIENTED_EDGE('',*,*,#865,.T.);+#865=EDGE_CURVE('',#862,#866,#413,.T.);+#866=VERTEX_POINT('',#867);+#867=CARTESIAN_POINT('',(-1.875,-0.845,0.65));+#868=ORIENTED_EDGE('',*,*,#869,.T.);+#869=EDGE_CURVE('',#866,#870,#413,.T.);+#870=VERTEX_POINT('',#871);+#871=CARTESIAN_POINT('',(-1.875,-0.425,0.65));+#872=ORIENTED_EDGE('',*,*,#873,.T.);+#873=EDGE_CURVE('',#870,#874,#413,.T.);+#874=VERTEX_POINT('',#875);+#875=CARTESIAN_POINT('',(-1.875,0.425,0.65));+#876=ORIENTED_EDGE('',*,*,#877,.T.);+#877=EDGE_CURVE('',#874,#878,#413,.T.);+#878=VERTEX_POINT('',#879);+#879=CARTESIAN_POINT('',(-1.875,0.845,0.65));+#880=ORIENTED_EDGE('',*,*,#881,.T.);+#881=EDGE_CURVE('',#878,#845,#413,.T.);+#882=ORIENTED_EDGE('',*,*,#844,.T.);+#883=ORIENTED_EDGE('',*,*,#410,.T.);+#884=ORIENTED_EDGE('',*,*,#885,.T.);+#885=EDGE_CURVE('',#406,#886,#888,.T.);+#886=VERTEX_POINT('',#887);+#887=CARTESIAN_POINT('',(-1.803727001854,2.201863500927,1.1));+#888=B_SPLINE_CURVE_WITH_KNOTS('',1,(#407,#887),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#889=ORIENTED_EDGE('',*,*,#890,.F.);+#890=EDGE_CURVE('',#891,#886,#893,.T.);+#891=VERTEX_POINT('',#892);+#892=CARTESIAN_POINT('',(-1.803727001854,-2.201863500927,1.1));+#893=LINE('',#892,#59);+#894=ORIENTED_EDGE('',*,*,#895,.F.);+#895=EDGE_CURVE('',#857,#891,#896,.T.);+#896=B_SPLINE_CURVE_WITH_KNOTS('',1,(#414,#892),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#897=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#414,#892),(#407,#887)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#898=ADVANCED_FACE('',(#899),#911,.F.);+#899=FACE_BOUND('',#900,.F.);+#900=EDGE_LOOP('',(#901,#902,#907,#910));+#901=ORIENTED_EDGE('',*,*,#405,.T.);+#902=ORIENTED_EDGE('',*,*,#903,.T.);+#903=EDGE_CURVE('',#401,#904,#906,.T.);+#904=VERTEX_POINT('',#905);+#905=CARTESIAN_POINT('',(-1.701863500927,2.303727001854,1.1));+#906=B_SPLINE_CURVE_WITH_KNOTS('',1,(#402,#905),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#907=ORIENTED_EDGE('',*,*,#908,.F.);+#908=EDGE_CURVE('',#886,#904,#909,.T.);+#909=LINE('',#887,#52);+#910=ORIENTED_EDGE('',*,*,#885,.F.);+#911=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#407,#887),(#402,#905)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#912=ADVANCED_FACE('',(#913),#925,.F.);+#913=FACE_BOUND('',#914,.F.);+#914=EDGE_LOOP('',(#915,#916,#921,#924));+#915=ORIENTED_EDGE('',*,*,#400,.T.);+#916=ORIENTED_EDGE('',*,*,#917,.T.);+#917=EDGE_CURVE('',#396,#918,#920,.T.);+#918=VERTEX_POINT('',#919);+#919=CARTESIAN_POINT('',(1.701863500927,2.303727001854,1.1));+#920=B_SPLINE_CURVE_WITH_KNOTS('',1,(#397,#919),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#921=ORIENTED_EDGE('',*,*,#922,.F.);+#922=EDGE_CURVE('',#904,#918,#923,.T.);+#923=LINE('',#905,#27);+#924=ORIENTED_EDGE('',*,*,#903,.F.);+#925=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#402,#905),(#397,#919)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#926=ADVANCED_FACE('',(#927),#939,.F.);+#927=FACE_BOUND('',#928,.F.);+#928=EDGE_LOOP('',(#929,#930,#935,#938));+#929=ORIENTED_EDGE('',*,*,#395,.T.);+#930=ORIENTED_EDGE('',*,*,#931,.T.);+#931=EDGE_CURVE('',#391,#932,#934,.T.);+#932=VERTEX_POINT('',#933);+#933=CARTESIAN_POINT('',(1.803727001854,2.201863500927,1.1));+#934=B_SPLINE_CURVE_WITH_KNOTS('',1,(#392,#933),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#935=ORIENTED_EDGE('',*,*,#936,.F.);+#936=EDGE_CURVE('',#918,#932,#937,.T.);+#937=LINE('',#919,#92);+#938=ORIENTED_EDGE('',*,*,#917,.F.);+#939=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#397,#919),(#392,#933)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#940=ADVANCED_FACE('',(#941),#985,.F.);+#941=FACE_BOUND('',#942,.F.);+#942=EDGE_LOOP('',(#943,#944,#948,#952,#956,#960,#964,#968,#972,#976,#981,#984));+#943=ORIENTED_EDGE('',*,*,#390,.T.);+#944=ORIENTED_EDGE('',*,*,#945,.T.);+#945=EDGE_CURVE('',#385,#946,#393,.T.);+#946=VERTEX_POINT('',#947);+#947=CARTESIAN_POINT('',(1.875,1.695,0.65));+#948=ORIENTED_EDGE('',*,*,#949,.T.);+#949=EDGE_CURVE('',#946,#950,#393,.T.);+#950=VERTEX_POINT('',#951);+#951=CARTESIAN_POINT('',(1.875,0.845,0.65));+#952=ORIENTED_EDGE('',*,*,#953,.T.);+#953=EDGE_CURVE('',#950,#954,#393,.T.);+#954=VERTEX_POINT('',#955);+#955=CARTESIAN_POINT('',(1.875,0.425,0.65));+#956=ORIENTED_EDGE('',*,*,#957,.T.);+#957=EDGE_CURVE('',#954,#958,#393,.T.);+#958=VERTEX_POINT('',#959);+#959=CARTESIAN_POINT('',(1.875,-0.425,0.65));+#960=ORIENTED_EDGE('',*,*,#961,.T.);+#961=EDGE_CURVE('',#958,#962,#393,.T.);+#962=VERTEX_POINT('',#963);+#963=CARTESIAN_POINT('',(1.875,-0.845,0.65));+#964=ORIENTED_EDGE('',*,*,#965,.T.);+#965=EDGE_CURVE('',#962,#966,#393,.T.);+#966=VERTEX_POINT('',#967);+#967=CARTESIAN_POINT('',(1.875,-1.695,0.65));+#968=ORIENTED_EDGE('',*,*,#969,.T.);+#969=EDGE_CURVE('',#966,#970,#393,.T.);+#970=VERTEX_POINT('',#971);+#971=CARTESIAN_POINT('',(1.875,-2.115,0.65));+#972=ORIENTED_EDGE('',*,*,#973,.T.);+#973=EDGE_CURVE('',#970,#974,#393,.T.);+#974=VERTEX_POINT('',#975);+#975=CARTESIAN_POINT('',(1.875,-2.2375,0.65));+#976=ORIENTED_EDGE('',*,*,#977,.T.);+#977=EDGE_CURVE('',#974,#978,#980,.T.);+#978=VERTEX_POINT('',#979);+#979=CARTESIAN_POINT('',(1.803727001854,-2.201863500927,1.1));+#980=B_SPLINE_CURVE_WITH_KNOTS('',1,(#975,#979),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#981=ORIENTED_EDGE('',*,*,#982,.F.);+#982=EDGE_CURVE('',#932,#978,#983,.T.);+#983=LINE('',#933,#87);+#984=ORIENTED_EDGE('',*,*,#931,.F.);+#985=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#392,#933),(#975,#979)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#986=ADVANCED_FACE('',(#987),#1004,.F.);+#987=FACE_BOUND('',#988,.F.);+#988=EDGE_LOOP('',(#989,#992,#997,#1000,#1002,#1003));+#989=ORIENTED_EDGE('',*,*,#990,.F.);+#990=EDGE_CURVE('',#991,#380,#387,.T.);+#991=VERTEX_POINT('',#388);+#992=ORIENTED_EDGE('',*,*,#993,.T.);+#993=EDGE_CURVE('',#991,#994,#996,.T.);+#994=VERTEX_POINT('',#995);+#995=CARTESIAN_POINT('',(2.05,1.695,0.65));+#996=LINE('',#388,#87);+#997=ORIENTED_EDGE('',*,*,#998,.T.);+#998=EDGE_CURVE('',#994,#651,#999,.T.);+#999=LINE('',#995,#73);+#1000=ORIENTED_EDGE('',*,*,#1001,.T.);+#1001=EDGE_CURVE('',#651,#946,#999,.T.);+#1002=ORIENTED_EDGE('',*,*,#945,.F.);+#1003=ORIENTED_EDGE('',*,*,#384,.F.);+#1004=PLANE('',#1005);+#1005=AXIS2_PLACEMENT_3D('',#388,#851,#74);+#1006=ADVANCED_FACE('',(#1007),#427,.F.);+#1007=FACE_BOUND('',#1008,.F.);+#1008=EDGE_LOOP('',(#1009,#1010,#1014,#1015,#1020,#1025,#1028,#1029,#1033,#1034,#1035,#1036));+#1009=ORIENTED_EDGE('',*,*,#458,.T.);+#1010=ORIENTED_EDGE('',*,*,#1011,.T.);+#1011=EDGE_CURVE('',#453,#858,#1012,.T.);+#1012=LINE('',#1013,#421);+#1013=CARTESIAN_POINT('',(-2.05,-2.115,0.65));+#1014=ORIENTED_EDGE('',*,*,#856,.F.);+#1015=ORIENTED_EDGE('',*,*,#1016,.F.);+#1016=EDGE_CURVE('',#1017,#857,#1019,.T.);+#1017=VERTEX_POINT('',#1018);+#1018=CARTESIAN_POINT('',(-1.7375,-2.375,0.65));+#1019=LINE('',#1018,#66);+#1020=ORIENTED_EDGE('',*,*,#1021,.F.);+#1021=EDGE_CURVE('',#1022,#1017,#1024,.T.);+#1022=VERTEX_POINT('',#1023);+#1023=CARTESIAN_POINT('',(1.7375,-2.375,0.65));+#1024=LINE('',#1023,#73);+#1025=ORIENTED_EDGE('',*,*,#1026,.F.);+#1026=EDGE_CURVE('',#974,#1022,#1027,.T.);+#1027=LINE('',#975,#80);+#1028=ORIENTED_EDGE('',*,*,#973,.F.);+#1029=ORIENTED_EDGE('',*,*,#1030,.F.);+#1030=EDGE_CURVE('',#768,#970,#1031,.T.);+#1031=LINE('',#1032,#73);+#1032=CARTESIAN_POINT('',(2.05,-2.115,0.65));+#1033=ORIENTED_EDGE('',*,*,#779,.T.);+#1034=ORIENTED_EDGE('',*,*,#805,.T.);+#1035=ORIENTED_EDGE('',*,*,#816,.T.);+#1036=ORIENTED_EDGE('',*,*,#786,.T.);+#1037=ADVANCED_FACE('',(#1038),#1105,.F.);+#1038=FACE_BOUND('',#1039,.F.);+#1039=EDGE_LOOP('',(#1040,#1041,#1042,#1051,#1058,#1067,#1072,#1077,#1082,#1090,#1097,#1103));+#1040=ORIENTED_EDGE('',*,*,#452,.F.);+#1041=ORIENTED_EDGE('',*,*,#465,.T.);+#1042=ORIENTED_EDGE('',*,*,#1043,.T.);+#1043=EDGE_CURVE('',#466,#1044,#1046,.T.);+#1044=VERTEX_POINT('',#1045);+#1045=CARTESIAN_POINT('',(-2.148480775301,-2.115,0.467364817767));+#1046=CIRCLE('',#1047,1.E-01);+#1047=AXIS2_PLACEMENT_3D('',#1048,#1049,#1050);+#1048=CARTESIAN_POINT('',(-2.05,-2.115,0.45));+#1049=DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47));+#1050=DIRECTION('',(4.440892098501E-15,-5.081436361562E-32,1.));+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1044,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-2.197120194575,-2.115,0.165270364467));+#1055=LINE('',#1045,#1056);+#1056=VECTOR('',#1057,1.);+#1057=DIRECTION('',(-0.158960115908,1.818881646068E-18,-0.987285005229));+#1058=ORIENTED_EDGE('',*,*,#1059,.T.);+#1059=EDGE_CURVE('',#1053,#1060,#1062,.T.);+#1060=VERTEX_POINT('',#1061);+#1061=CARTESIAN_POINT('',(-2.394081745177,-2.115,-1.110223024625E-16));+#1062=CIRCLE('',#1063,0.2);+#1063=AXIS2_PLACEMENT_3D('',#1064,#1065,#1066);+#1064=CARTESIAN_POINT('',(-2.394081745177,-2.115,0.2));+#1065=DIRECTION('',(1.144237745222E-17,1.,-7.703719777549E-34));+#1066=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#1060,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-3.15,-2.115,-1.110223024625E-16));+#1071=LINE('',#1061,#470);+#1072=ORIENTED_EDGE('',*,*,#1073,.T.);+#1073=EDGE_CURVE('',#1069,#1074,#1076,.T.);+#1074=VERTEX_POINT('',#1075);+#1075=CARTESIAN_POINT('',(-3.15,-2.115,1.E-01));+#1076=LINE('',#1070,#304);+#1077=ORIENTED_EDGE('',*,*,#1078,.T.);+#1078=EDGE_CURVE('',#1074,#1079,#1081,.T.);+#1079=VERTEX_POINT('',#1080);+#1080=CARTESIAN_POINT('',(-2.394081745177,-2.115,1.E-01));+#1081=LINE('',#1075,#421);+#1082=ORIENTED_EDGE('',*,*,#1083,.T.);+#1083=EDGE_CURVE('',#1079,#1084,#1086,.T.);+#1084=VERTEX_POINT('',#1085);+#1085=CARTESIAN_POINT('',(-2.295600969876,-2.115,0.182635182233));+#1086=CIRCLE('',#1087,1.E-01);+#1087=AXIS2_PLACEMENT_3D('',#1064,#1088,#1089);+#1088=DIRECTION('',(-1.144237745222E-17,-1.,-4.379057701015E-47));+#1089=DIRECTION('',(-4.440892098501E-15,5.081436361562E-32,-1.));+#1090=ORIENTED_EDGE('',*,*,#1091,.T.);+#1091=EDGE_CURVE('',#1084,#1092,#1094,.T.);+#1092=VERTEX_POINT('',#1093);+#1093=CARTESIAN_POINT('',(-2.246961550602,-2.115,0.484729635533));+#1094=LINE('',#1085,#1095);+#1095=VECTOR('',#1096,1.);+#1096=DIRECTION('',(0.158960115908,-1.818881646068E-18,0.987285005229));+#1097=ORIENTED_EDGE('',*,*,#1098,.T.);+#1098=EDGE_CURVE('',#1092,#1099,#1100,.T.);+#1099=VERTEX_POINT('',#1013);+#1100=CIRCLE('',#1101,0.2);+#1101=AXIS2_PLACEMENT_3D('',#1048,#1065,#1102);+#1102=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#1103=ORIENTED_EDGE('',*,*,#1104,.T.);+#1104=EDGE_CURVE('',#1099,#453,#1012,.T.);+#1105=PLANE('',#1106);+#1106=AXIS2_PLACEMENT_3D('',#1107,#483,#13);+#1107=CARTESIAN_POINT('',(-2.422800780068,-2.115,0.248849690266));+#1108=ADVANCED_FACE('',(#1109),#1123,.F.);+#1109=FACE_BOUND('',#1110,.F.);+#1110=EDGE_LOOP('',(#1111,#1112,#1119,#1122));+#1111=ORIENTED_EDGE('',*,*,#480,.T.);+#1112=ORIENTED_EDGE('',*,*,#1113,.T.);+#1113=EDGE_CURVE('',#475,#1114,#1116,.T.);+#1114=VERTEX_POINT('',#1115);+#1115=CARTESIAN_POINT('',(-2.148480775301,-1.695,0.467364817767));+#1116=CIRCLE('',#1117,1.E-01);+#1117=AXIS2_PLACEMENT_3D('',#1118,#1049,#1050);+#1118=CARTESIAN_POINT('',(-2.05,-1.695,0.45));+#1119=ORIENTED_EDGE('',*,*,#1120,.F.);+#1120=EDGE_CURVE('',#1044,#1114,#1121,.T.);+#1121=LINE('',#1045,#482);+#1122=ORIENTED_EDGE('',*,*,#1043,.F.);+#1123=CYLINDRICAL_SURFACE('',#1124,1.E-01);+#1124=AXIS2_PLACEMENT_3D('',#1048,#1125,#1050);+#1125=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1126=ADVANCED_FACE('',(#1127),#1176,.T.);+#1127=FACE_BOUND('',#1128,.T.);+#1128=EDGE_LOOP('',(#489,#473,#1112,#1129,#1134,#1141,#1146,#1151,#1156,#1162,#1167,#1173));+#1129=ORIENTED_EDGE('',*,*,#1130,.T.);+#1130=EDGE_CURVE('',#1114,#1131,#1133,.T.);+#1131=VERTEX_POINT('',#1132);+#1132=CARTESIAN_POINT('',(-2.197120194575,-1.695,0.165270364467));+#1133=LINE('',#1115,#1056);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#1131,#1136,#1138,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(-2.394081745177,-1.695,-1.110223024625E-16));+#1138=CIRCLE('',#1139,0.2);+#1139=AXIS2_PLACEMENT_3D('',#1140,#1065,#1066);+#1140=CARTESIAN_POINT('',(-2.394081745177,-1.695,0.2));+#1141=ORIENTED_EDGE('',*,*,#1142,.T.);+#1142=EDGE_CURVE('',#1136,#1143,#1145,.T.);+#1143=VERTEX_POINT('',#1144);+#1144=CARTESIAN_POINT('',(-3.15,-1.695,-1.110223024625E-16));+#1145=LINE('',#1137,#470);+#1146=ORIENTED_EDGE('',*,*,#1147,.T.);+#1147=EDGE_CURVE('',#1143,#1148,#1150,.T.);+#1148=VERTEX_POINT('',#1149);+#1149=CARTESIAN_POINT('',(-3.15,-1.695,1.E-01));+#1150=LINE('',#1144,#304);+#1151=ORIENTED_EDGE('',*,*,#1152,.T.);+#1152=EDGE_CURVE('',#1148,#1153,#1155,.T.);+#1153=VERTEX_POINT('',#1154);+#1154=CARTESIAN_POINT('',(-2.394081745177,-1.695,1.E-01));+#1155=LINE('',#1149,#421);+#1156=ORIENTED_EDGE('',*,*,#1157,.T.);+#1157=EDGE_CURVE('',#1153,#1158,#1160,.T.);+#1158=VERTEX_POINT('',#1159);+#1159=CARTESIAN_POINT('',(-2.295600969876,-1.695,0.182635182233));+#1160=CIRCLE('',#1161,1.E-01);+#1161=AXIS2_PLACEMENT_3D('',#1140,#1088,#1089);+#1162=ORIENTED_EDGE('',*,*,#1163,.T.);+#1163=EDGE_CURVE('',#1158,#1164,#1166,.T.);+#1164=VERTEX_POINT('',#1165);+#1165=CARTESIAN_POINT('',(-2.246961550602,-1.695,0.484729635533));+#1166=LINE('',#1159,#1095);+#1167=ORIENTED_EDGE('',*,*,#1168,.T.);+#1168=EDGE_CURVE('',#1164,#1169,#1171,.T.);+#1169=VERTEX_POINT('',#1170);+#1170=CARTESIAN_POINT('',(-2.05,-1.695,0.65));+#1171=CIRCLE('',#1172,0.2);+#1172=AXIS2_PLACEMENT_3D('',#1118,#1065,#1102);+#1173=ORIENTED_EDGE('',*,*,#1174,.T.);+#1174=EDGE_CURVE('',#1169,#491,#1175,.T.);+#1175=LINE('',#1170,#421);+#1176=PLANE('',#1177);+#1177=AXIS2_PLACEMENT_3D('',#1178,#483,#13);+#1178=CARTESIAN_POINT('',(-2.422800780068,-1.695,0.248849690266));+#1179=ADVANCED_FACE('',(#1180),#427,.F.);+#1180=FACE_BOUND('',#1181,.F.);+#1181=EDGE_LOOP('',(#1182,#1183,#1187,#1188));+#1182=ORIENTED_EDGE('',*,*,#503,.T.);+#1183=ORIENTED_EDGE('',*,*,#1184,.T.);+#1184=EDGE_CURVE('',#498,#866,#1185,.T.);+#1185=LINE('',#1186,#421);+#1186=CARTESIAN_POINT('',(-2.05,-0.845,0.65));+#1187=ORIENTED_EDGE('',*,*,#865,.F.);+#1188=ORIENTED_EDGE('',*,*,#1189,.F.);+#1189=EDGE_CURVE('',#491,#862,#1175,.T.);+#1190=ADVANCED_FACE('',(#1191),#1247,.F.);+#1191=FACE_BOUND('',#1192,.F.);+#1192=EDGE_LOOP('',(#1193,#1194,#1195,#1202,#1207,#1214,#1219,#1224,#1229,#1235,#1240,#1245));+#1193=ORIENTED_EDGE('',*,*,#497,.F.);+#1194=ORIENTED_EDGE('',*,*,#508,.T.);+#1195=ORIENTED_EDGE('',*,*,#1196,.T.);+#1196=EDGE_CURVE('',#509,#1197,#1199,.T.);+#1197=VERTEX_POINT('',#1198);+#1198=CARTESIAN_POINT('',(-2.148480775301,-0.845,0.467364817767));+#1199=CIRCLE('',#1200,1.E-01);+#1200=AXIS2_PLACEMENT_3D('',#1201,#1049,#1050);+#1201=CARTESIAN_POINT('',(-2.05,-0.845,0.45));+#1202=ORIENTED_EDGE('',*,*,#1203,.T.);+#1203=EDGE_CURVE('',#1197,#1204,#1206,.T.);+#1204=VERTEX_POINT('',#1205);+#1205=CARTESIAN_POINT('',(-2.197120194575,-0.845,0.165270364467));+#1206=LINE('',#1198,#1056);+#1207=ORIENTED_EDGE('',*,*,#1208,.T.);+#1208=EDGE_CURVE('',#1204,#1209,#1211,.T.);+#1209=VERTEX_POINT('',#1210);+#1210=CARTESIAN_POINT('',(-2.394081745177,-0.845,-1.110223024625E-16));+#1211=CIRCLE('',#1212,0.2);+#1212=AXIS2_PLACEMENT_3D('',#1213,#1065,#1066);+#1213=CARTESIAN_POINT('',(-2.394081745177,-0.845,0.2));+#1214=ORIENTED_EDGE('',*,*,#1215,.T.);+#1215=EDGE_CURVE('',#1209,#1216,#1218,.T.);+#1216=VERTEX_POINT('',#1217);+#1217=CARTESIAN_POINT('',(-3.15,-0.845,-1.110223024625E-16));+#1218=LINE('',#1210,#470);+#1219=ORIENTED_EDGE('',*,*,#1220,.T.);+#1220=EDGE_CURVE('',#1216,#1221,#1223,.T.);+#1221=VERTEX_POINT('',#1222);+#1222=CARTESIAN_POINT('',(-3.15,-0.845,1.E-01));+#1223=LINE('',#1217,#304);+#1224=ORIENTED_EDGE('',*,*,#1225,.T.);+#1225=EDGE_CURVE('',#1221,#1226,#1228,.T.);+#1226=VERTEX_POINT('',#1227);+#1227=CARTESIAN_POINT('',(-2.394081745177,-0.845,1.E-01));+#1228=LINE('',#1222,#421);+#1229=ORIENTED_EDGE('',*,*,#1230,.T.);+#1230=EDGE_CURVE('',#1226,#1231,#1233,.T.);+#1231=VERTEX_POINT('',#1232);+#1232=CARTESIAN_POINT('',(-2.295600969876,-0.845,0.182635182233));+#1233=CIRCLE('',#1234,1.E-01);+#1234=AXIS2_PLACEMENT_3D('',#1213,#1088,#1089);+#1235=ORIENTED_EDGE('',*,*,#1236,.T.);+#1236=EDGE_CURVE('',#1231,#1237,#1239,.T.);+#1237=VERTEX_POINT('',#1238);+#1238=CARTESIAN_POINT('',(-2.246961550602,-0.845,0.484729635533));+#1239=LINE('',#1232,#1095);+#1240=ORIENTED_EDGE('',*,*,#1241,.T.);+#1241=EDGE_CURVE('',#1237,#1242,#1243,.T.);+#1242=VERTEX_POINT('',#1186);+#1243=CIRCLE('',#1244,0.2);+#1244=AXIS2_PLACEMENT_3D('',#1201,#1065,#1102);+#1245=ORIENTED_EDGE('',*,*,#1246,.T.);+#1246=EDGE_CURVE('',#1242,#498,#1185,.T.);+#1247=PLANE('',#1248);+#1248=AXIS2_PLACEMENT_3D('',#1249,#483,#13);+#1249=CARTESIAN_POINT('',(-2.422800780068,-0.845,0.248849690266));+#1250=ADVANCED_FACE('',(#1251),#1265,.F.);+#1251=FACE_BOUND('',#1252,.F.);+#1252=EDGE_LOOP('',(#1253,#1254,#1261,#1264));+#1253=ORIENTED_EDGE('',*,*,#521,.T.);+#1254=ORIENTED_EDGE('',*,*,#1255,.T.);+#1255=EDGE_CURVE('',#516,#1256,#1258,.T.);+#1256=VERTEX_POINT('',#1257);+#1257=CARTESIAN_POINT('',(-2.148480775301,-0.425,0.467364817767));+#1258=CIRCLE('',#1259,1.E-01);+#1259=AXIS2_PLACEMENT_3D('',#1260,#1049,#1050);+#1260=CARTESIAN_POINT('',(-2.05,-0.425,0.45));+#1261=ORIENTED_EDGE('',*,*,#1262,.F.);+#1262=EDGE_CURVE('',#1197,#1256,#1263,.T.);+#1263=LINE('',#1198,#482);+#1264=ORIENTED_EDGE('',*,*,#1196,.F.);+#1265=CYLINDRICAL_SURFACE('',#1266,1.E-01);+#1266=AXIS2_PLACEMENT_3D('',#1201,#1125,#1050);+#1267=ADVANCED_FACE('',(#1268),#1317,.T.);+#1268=FACE_BOUND('',#1269,.T.);+#1269=EDGE_LOOP('',(#528,#514,#1254,#1270,#1275,#1282,#1287,#1292,#1297,#1303,#1308,#1314));+#1270=ORIENTED_EDGE('',*,*,#1271,.T.);+#1271=EDGE_CURVE('',#1256,#1272,#1274,.T.);+#1272=VERTEX_POINT('',#1273);+#1273=CARTESIAN_POINT('',(-2.197120194575,-0.425,0.165270364467));+#1274=LINE('',#1257,#1056);+#1275=ORIENTED_EDGE('',*,*,#1276,.T.);+#1276=EDGE_CURVE('',#1272,#1277,#1279,.T.);+#1277=VERTEX_POINT('',#1278);+#1278=CARTESIAN_POINT('',(-2.394081745177,-0.425,-1.110223024625E-16));+#1279=CIRCLE('',#1280,0.2);+#1280=AXIS2_PLACEMENT_3D('',#1281,#1065,#1066);+#1281=CARTESIAN_POINT('',(-2.394081745177,-0.425,0.2));+#1282=ORIENTED_EDGE('',*,*,#1283,.T.);+#1283=EDGE_CURVE('',#1277,#1284,#1286,.T.);+#1284=VERTEX_POINT('',#1285);+#1285=CARTESIAN_POINT('',(-3.15,-0.425,-1.110223024625E-16));+#1286=LINE('',#1278,#470);+#1287=ORIENTED_EDGE('',*,*,#1288,.T.);+#1288=EDGE_CURVE('',#1284,#1289,#1291,.T.);+#1289=VERTEX_POINT('',#1290);+#1290=CARTESIAN_POINT('',(-3.15,-0.425,1.E-01));+#1291=LINE('',#1285,#304);+#1292=ORIENTED_EDGE('',*,*,#1293,.T.);+#1293=EDGE_CURVE('',#1289,#1294,#1296,.T.);+#1294=VERTEX_POINT('',#1295);+#1295=CARTESIAN_POINT('',(-2.394081745177,-0.425,1.E-01));+#1296=LINE('',#1290,#421);+#1297=ORIENTED_EDGE('',*,*,#1298,.T.);+#1298=EDGE_CURVE('',#1294,#1299,#1301,.T.);+#1299=VERTEX_POINT('',#1300);+#1300=CARTESIAN_POINT('',(-2.295600969876,-0.425,0.182635182233));+#1301=CIRCLE('',#1302,1.E-01);+#1302=AXIS2_PLACEMENT_3D('',#1281,#1088,#1089);+#1303=ORIENTED_EDGE('',*,*,#1304,.T.);+#1304=EDGE_CURVE('',#1299,#1305,#1307,.T.);+#1305=VERTEX_POINT('',#1306);+#1306=CARTESIAN_POINT('',(-2.246961550602,-0.425,0.484729635533));+#1307=LINE('',#1300,#1095);+#1308=ORIENTED_EDGE('',*,*,#1309,.T.);+#1309=EDGE_CURVE('',#1305,#1310,#1312,.T.);+#1310=VERTEX_POINT('',#1311);+#1311=CARTESIAN_POINT('',(-2.05,-0.425,0.65));+#1312=CIRCLE('',#1313,0.2);+#1313=AXIS2_PLACEMENT_3D('',#1260,#1065,#1102);+#1314=ORIENTED_EDGE('',*,*,#1315,.T.);+#1315=EDGE_CURVE('',#1310,#530,#1316,.T.);+#1316=LINE('',#1311,#421);+#1317=PLANE('',#1318);+#1318=AXIS2_PLACEMENT_3D('',#1319,#483,#13);+#1319=CARTESIAN_POINT('',(-2.422800780068,-0.425,0.248849690266));+#1320=ADVANCED_FACE('',(#1321),#427,.F.);+#1321=FACE_BOUND('',#1322,.F.);+#1322=EDGE_LOOP('',(#1323,#1324,#1328,#1329));+#1323=ORIENTED_EDGE('',*,*,#542,.T.);+#1324=ORIENTED_EDGE('',*,*,#1325,.T.);+#1325=EDGE_CURVE('',#537,#874,#1326,.T.);+#1326=LINE('',#1327,#421);+#1327=CARTESIAN_POINT('',(-2.05,0.425,0.65));+#1328=ORIENTED_EDGE('',*,*,#873,.F.);+#1329=ORIENTED_EDGE('',*,*,#1330,.F.);+#1330=EDGE_CURVE('',#530,#870,#1316,.T.);+#1331=ADVANCED_FACE('',(#1332),#1388,.F.);+#1332=FACE_BOUND('',#1333,.F.);+#1333=EDGE_LOOP('',(#1334,#1335,#1336,#1343,#1348,#1355,#1360,#1365,#1370,#1376,#1381,#1386));+#1334=ORIENTED_EDGE('',*,*,#536,.F.);+#1335=ORIENTED_EDGE('',*,*,#547,.T.);+#1336=ORIENTED_EDGE('',*,*,#1337,.T.);+#1337=EDGE_CURVE('',#548,#1338,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(-2.148480775301,0.425,0.467364817767));+#1340=CIRCLE('',#1341,1.E-01);+#1341=AXIS2_PLACEMENT_3D('',#1342,#1049,#1050);+#1342=CARTESIAN_POINT('',(-2.05,0.425,0.45));+#1343=ORIENTED_EDGE('',*,*,#1344,.T.);+#1344=EDGE_CURVE('',#1338,#1345,#1347,.T.);+#1345=VERTEX_POINT('',#1346);+#1346=CARTESIAN_POINT('',(-2.197120194575,0.425,0.165270364467));+#1347=LINE('',#1339,#1056);+#1348=ORIENTED_EDGE('',*,*,#1349,.T.);+#1349=EDGE_CURVE('',#1345,#1350,#1352,.T.);+#1350=VERTEX_POINT('',#1351);+#1351=CARTESIAN_POINT('',(-2.394081745177,0.425,-1.110223024625E-16));+#1352=CIRCLE('',#1353,0.2);+#1353=AXIS2_PLACEMENT_3D('',#1354,#1065,#1066);+#1354=CARTESIAN_POINT('',(-2.394081745177,0.425,0.2));+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1350,#1357,#1359,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(-3.15,0.425,-1.110223024625E-16));+#1359=LINE('',#1351,#470);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#1357,#1362,#1364,.T.);+#1362=VERTEX_POINT('',#1363);+#1363=CARTESIAN_POINT('',(-3.15,0.425,1.E-01));+#1364=LINE('',#1358,#304);+#1365=ORIENTED_EDGE('',*,*,#1366,.T.);+#1366=EDGE_CURVE('',#1362,#1367,#1369,.T.);+#1367=VERTEX_POINT('',#1368);+#1368=CARTESIAN_POINT('',(-2.394081745177,0.425,1.E-01));+#1369=LINE('',#1363,#421);+#1370=ORIENTED_EDGE('',*,*,#1371,.T.);+#1371=EDGE_CURVE('',#1367,#1372,#1374,.T.);+#1372=VERTEX_POINT('',#1373);+#1373=CARTESIAN_POINT('',(-2.295600969876,0.425,0.182635182233));+#1374=CIRCLE('',#1375,1.E-01);+#1375=AXIS2_PLACEMENT_3D('',#1354,#1088,#1089);+#1376=ORIENTED_EDGE('',*,*,#1377,.T.);+#1377=EDGE_CURVE('',#1372,#1378,#1380,.T.);+#1378=VERTEX_POINT('',#1379);+#1379=CARTESIAN_POINT('',(-2.246961550602,0.425,0.484729635533));+#1380=LINE('',#1373,#1095);+#1381=ORIENTED_EDGE('',*,*,#1382,.T.);+#1382=EDGE_CURVE('',#1378,#1383,#1384,.T.);+#1383=VERTEX_POINT('',#1327);+#1384=CIRCLE('',#1385,0.2);+#1385=AXIS2_PLACEMENT_3D('',#1342,#1065,#1102);+#1386=ORIENTED_EDGE('',*,*,#1387,.T.);+#1387=EDGE_CURVE('',#1383,#537,#1326,.T.);+#1388=PLANE('',#1389);+#1389=AXIS2_PLACEMENT_3D('',#1390,#483,#13);+#1390=CARTESIAN_POINT('',(-2.422800780068,0.425,0.248849690266));+#1391=ADVANCED_FACE('',(#1392),#1406,.F.);+#1392=FACE_BOUND('',#1393,.F.);+#1393=EDGE_LOOP('',(#1394,#1395,#1402,#1405));+#1394=ORIENTED_EDGE('',*,*,#560,.T.);+#1395=ORIENTED_EDGE('',*,*,#1396,.T.);+#1396=EDGE_CURVE('',#555,#1397,#1399,.T.);+#1397=VERTEX_POINT('',#1398);+#1398=CARTESIAN_POINT('',(-2.148480775301,0.845,0.467364817767));+#1399=CIRCLE('',#1400,1.E-01);+#1400=AXIS2_PLACEMENT_3D('',#1401,#1049,#1050);+#1401=CARTESIAN_POINT('',(-2.05,0.845,0.45));+#1402=ORIENTED_EDGE('',*,*,#1403,.F.);+#1403=EDGE_CURVE('',#1338,#1397,#1404,.T.);+#1404=LINE('',#1339,#482);+#1405=ORIENTED_EDGE('',*,*,#1337,.F.);+#1406=CYLINDRICAL_SURFACE('',#1407,1.E-01);+#1407=AXIS2_PLACEMENT_3D('',#1342,#1125,#1050);+#1408=ADVANCED_FACE('',(#1409),#1458,.T.);+#1409=FACE_BOUND('',#1410,.T.);+#1410=EDGE_LOOP('',(#567,#553,#1395,#1411,#1416,#1423,#1428,#1433,#1438,#1444,#1449,#1455));+#1411=ORIENTED_EDGE('',*,*,#1412,.T.);+#1412=EDGE_CURVE('',#1397,#1413,#1415,.T.);+#1413=VERTEX_POINT('',#1414);+#1414=CARTESIAN_POINT('',(-2.197120194575,0.845,0.165270364467));+#1415=LINE('',#1398,#1056);+#1416=ORIENTED_EDGE('',*,*,#1417,.T.);+#1417=EDGE_CURVE('',#1413,#1418,#1420,.T.);+#1418=VERTEX_POINT('',#1419);+#1419=CARTESIAN_POINT('',(-2.394081745177,0.845,-1.110223024625E-16));+#1420=CIRCLE('',#1421,0.2);+#1421=AXIS2_PLACEMENT_3D('',#1422,#1065,#1066);+#1422=CARTESIAN_POINT('',(-2.394081745177,0.845,0.2));+#1423=ORIENTED_EDGE('',*,*,#1424,.T.);+#1424=EDGE_CURVE('',#1418,#1425,#1427,.T.);+#1425=VERTEX_POINT('',#1426);+#1426=CARTESIAN_POINT('',(-3.15,0.845,-1.110223024625E-16));+#1427=LINE('',#1419,#470);+#1428=ORIENTED_EDGE('',*,*,#1429,.T.);+#1429=EDGE_CURVE('',#1425,#1430,#1432,.T.);+#1430=VERTEX_POINT('',#1431);+#1431=CARTESIAN_POINT('',(-3.15,0.845,1.E-01));+#1432=LINE('',#1426,#304);+#1433=ORIENTED_EDGE('',*,*,#1434,.T.);+#1434=EDGE_CURVE('',#1430,#1435,#1437,.T.);+#1435=VERTEX_POINT('',#1436);+#1436=CARTESIAN_POINT('',(-2.394081745177,0.845,1.E-01));+#1437=LINE('',#1431,#421);+#1438=ORIENTED_EDGE('',*,*,#1439,.T.);+#1439=EDGE_CURVE('',#1435,#1440,#1442,.T.);+#1440=VERTEX_POINT('',#1441);+#1441=CARTESIAN_POINT('',(-2.295600969876,0.845,0.182635182233));+#1442=CIRCLE('',#1443,1.E-01);+#1443=AXIS2_PLACEMENT_3D('',#1422,#1088,#1089);+#1444=ORIENTED_EDGE('',*,*,#1445,.T.);+#1445=EDGE_CURVE('',#1440,#1446,#1448,.T.);+#1446=VERTEX_POINT('',#1447);+#1447=CARTESIAN_POINT('',(-2.246961550602,0.845,0.484729635533));+#1448=LINE('',#1441,#1095);+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1446,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(-2.05,0.845,0.65));+#1453=CIRCLE('',#1454,0.2);+#1454=AXIS2_PLACEMENT_3D('',#1401,#1065,#1102);+#1455=ORIENTED_EDGE('',*,*,#1456,.T.);+#1456=EDGE_CURVE('',#1451,#569,#1457,.T.);+#1457=LINE('',#1452,#421);+#1458=PLANE('',#1459);+#1459=AXIS2_PLACEMENT_3D('',#1460,#483,#13);+#1460=CARTESIAN_POINT('',(-2.422800780068,0.845,0.248849690266));+#1461=ADVANCED_FACE('',(#1462),#427,.F.);+#1462=FACE_BOUND('',#1463,.F.);+#1463=EDGE_LOOP('',(#1464,#1465,#1466,#1467));+#1464=ORIENTED_EDGE('',*,*,#581,.T.);+#1465=ORIENTED_EDGE('',*,*,#848,.T.);+#1466=ORIENTED_EDGE('',*,*,#881,.F.);+#1467=ORIENTED_EDGE('',*,*,#1468,.F.);+#1468=EDGE_CURVE('',#569,#878,#1457,.T.);+#1469=ADVANCED_FACE('',(#1470),#1524,.F.);+#1470=FACE_BOUND('',#1471,.F.);+#1471=EDGE_LOOP('',(#1472,#1473,#1474,#1481,#1486,#1493,#1498,#1503,#1508,#1514,#1519,#1523));+#1472=ORIENTED_EDGE('',*,*,#575,.F.);+#1473=ORIENTED_EDGE('',*,*,#586,.T.);+#1474=ORIENTED_EDGE('',*,*,#1475,.T.);+#1475=EDGE_CURVE('',#587,#1476,#1478,.T.);+#1476=VERTEX_POINT('',#1477);+#1477=CARTESIAN_POINT('',(-2.148480775301,1.695,0.467364817767));+#1478=CIRCLE('',#1479,1.E-01);+#1479=AXIS2_PLACEMENT_3D('',#1480,#1049,#1050);+#1480=CARTESIAN_POINT('',(-2.05,1.695,0.45));+#1481=ORIENTED_EDGE('',*,*,#1482,.T.);+#1482=EDGE_CURVE('',#1476,#1483,#1485,.T.);+#1483=VERTEX_POINT('',#1484);+#1484=CARTESIAN_POINT('',(-2.197120194575,1.695,0.165270364467));+#1485=LINE('',#1477,#1056);+#1486=ORIENTED_EDGE('',*,*,#1487,.T.);+#1487=EDGE_CURVE('',#1483,#1488,#1490,.T.);+#1488=VERTEX_POINT('',#1489);+#1489=CARTESIAN_POINT('',(-2.394081745177,1.695,-1.110223024625E-16));+#1490=CIRCLE('',#1491,0.2);+#1491=AXIS2_PLACEMENT_3D('',#1492,#1065,#1066);+#1492=CARTESIAN_POINT('',(-2.394081745177,1.695,0.2));+#1493=ORIENTED_EDGE('',*,*,#1494,.T.);+#1494=EDGE_CURVE('',#1488,#1495,#1497,.T.);+#1495=VERTEX_POINT('',#1496);+#1496=CARTESIAN_POINT('',(-3.15,1.695,-1.110223024625E-16));+#1497=LINE('',#1489,#470);+#1498=ORIENTED_EDGE('',*,*,#1499,.T.);+#1499=EDGE_CURVE('',#1495,#1500,#1502,.T.);+#1500=VERTEX_POINT('',#1501);+#1501=CARTESIAN_POINT('',(-3.15,1.695,1.E-01));+#1502=LINE('',#1496,#304);+#1503=ORIENTED_EDGE('',*,*,#1504,.T.);+#1504=EDGE_CURVE('',#1500,#1505,#1507,.T.);+#1505=VERTEX_POINT('',#1506);+#1506=CARTESIAN_POINT('',(-2.394081745177,1.695,1.E-01));+#1507=LINE('',#1501,#421);+#1508=ORIENTED_EDGE('',*,*,#1509,.T.);+#1509=EDGE_CURVE('',#1505,#1510,#1512,.T.);+#1510=VERTEX_POINT('',#1511);+#1511=CARTESIAN_POINT('',(-2.295600969876,1.695,0.182635182233));+#1512=CIRCLE('',#1513,1.E-01);+#1513=AXIS2_PLACEMENT_3D('',#1492,#1088,#1089);+#1514=ORIENTED_EDGE('',*,*,#1515,.T.);+#1515=EDGE_CURVE('',#1510,#1516,#1518,.T.);+#1516=VERTEX_POINT('',#1517);+#1517=CARTESIAN_POINT('',(-2.246961550602,1.695,0.484729635533));+#1518=LINE('',#1511,#1095);+#1519=ORIENTED_EDGE('',*,*,#1520,.T.);+#1520=EDGE_CURVE('',#1516,#833,#1521,.T.);+#1521=CIRCLE('',#1522,0.2);+#1522=AXIS2_PLACEMENT_3D('',#1480,#1065,#1102);+#1523=ORIENTED_EDGE('',*,*,#832,.T.);+#1524=PLANE('',#1525);+#1525=AXIS2_PLACEMENT_3D('',#1526,#483,#13);+#1526=CARTESIAN_POINT('',(-2.422800780068,1.695,0.248849690266));+#1527=ADVANCED_FACE('',(#1528),#1542,.F.);+#1528=FACE_BOUND('',#1529,.F.);+#1529=EDGE_LOOP('',(#1530,#1531,#1538,#1541));+#1530=ORIENTED_EDGE('',*,*,#599,.T.);+#1531=ORIENTED_EDGE('',*,*,#1532,.T.);+#1532=EDGE_CURVE('',#594,#1533,#1535,.T.);+#1533=VERTEX_POINT('',#1534);+#1534=CARTESIAN_POINT('',(-2.148480775301,2.115,0.467364817767));+#1535=CIRCLE('',#1536,1.E-01);+#1536=AXIS2_PLACEMENT_3D('',#1537,#1049,#1050);+#1537=CARTESIAN_POINT('',(-2.05,2.115,0.45));+#1538=ORIENTED_EDGE('',*,*,#1539,.F.);+#1539=EDGE_CURVE('',#1476,#1533,#1540,.T.);+#1540=LINE('',#1477,#482);+#1541=ORIENTED_EDGE('',*,*,#1475,.F.);+#1542=CYLINDRICAL_SURFACE('',#1543,1.E-01);+#1543=AXIS2_PLACEMENT_3D('',#1480,#1125,#1050);+#1544=ADVANCED_FACE('',(#1545),#1589,.T.);+#1545=FACE_BOUND('',#1546,.T.);+#1546=EDGE_LOOP('',(#606,#592,#1531,#1547,#1552,#1559,#1564,#1569,#1574,#1580,#1585,#840));+#1547=ORIENTED_EDGE('',*,*,#1548,.T.);+#1548=EDGE_CURVE('',#1533,#1549,#1551,.T.);+#1549=VERTEX_POINT('',#1550);+#1550=CARTESIAN_POINT('',(-2.197120194575,2.115,0.165270364467));+#1551=LINE('',#1534,#1056);+#1552=ORIENTED_EDGE('',*,*,#1553,.T.);+#1553=EDGE_CURVE('',#1549,#1554,#1556,.T.);+#1554=VERTEX_POINT('',#1555);+#1555=CARTESIAN_POINT('',(-2.394081745177,2.115,-1.110223024625E-16));+#1556=CIRCLE('',#1557,0.2);+#1557=AXIS2_PLACEMENT_3D('',#1558,#1065,#1066);+#1558=CARTESIAN_POINT('',(-2.394081745177,2.115,0.2));+#1559=ORIENTED_EDGE('',*,*,#1560,.T.);+#1560=EDGE_CURVE('',#1554,#1561,#1563,.T.);+#1561=VERTEX_POINT('',#1562);+#1562=CARTESIAN_POINT('',(-3.15,2.115,-1.110223024625E-16));+#1563=LINE('',#1555,#470);+#1564=ORIENTED_EDGE('',*,*,#1565,.T.);+#1565=EDGE_CURVE('',#1561,#1566,#1568,.T.);+#1566=VERTEX_POINT('',#1567);+#1567=CARTESIAN_POINT('',(-3.15,2.115,1.E-01));+#1568=LINE('',#1562,#304);+#1569=ORIENTED_EDGE('',*,*,#1570,.T.);+#1570=EDGE_CURVE('',#1566,#1571,#1573,.T.);+#1571=VERTEX_POINT('',#1572);+#1572=CARTESIAN_POINT('',(-2.394081745177,2.115,1.E-01));+#1573=LINE('',#1567,#421);+#1574=ORIENTED_EDGE('',*,*,#1575,.T.);+#1575=EDGE_CURVE('',#1571,#1576,#1578,.T.);+#1576=VERTEX_POINT('',#1577);+#1577=CARTESIAN_POINT('',(-2.295600969876,2.115,0.182635182233));+#1578=CIRCLE('',#1579,1.E-01);+#1579=AXIS2_PLACEMENT_3D('',#1558,#1088,#1089);+#1580=ORIENTED_EDGE('',*,*,#1581,.T.);+#1581=EDGE_CURVE('',#1576,#1582,#1584,.T.);+#1582=VERTEX_POINT('',#1583);+#1583=CARTESIAN_POINT('',(-2.246961550602,2.115,0.484729635533));+#1584=LINE('',#1577,#1095);+#1585=ORIENTED_EDGE('',*,*,#1586,.T.);+#1586=EDGE_CURVE('',#1582,#838,#1587,.T.);+#1587=CIRCLE('',#1588,0.2);+#1588=AXIS2_PLACEMENT_3D('',#1537,#1065,#1102);+#1589=PLANE('',#1590);+#1590=AXIS2_PLACEMENT_3D('',#1591,#483,#13);+#1591=CARTESIAN_POINT('',(-2.422800780068,2.115,0.248849690266));+#1592=ADVANCED_FACE('',(#1593),#1655,.F.);+#1593=FACE_BOUND('',#1594,.F.);+#1594=EDGE_LOOP('',(#1595,#1596,#1597,#1605,#1612,#1620,#1625,#1630,#1635,#1642,#1649,#1654));+#1595=ORIENTED_EDGE('',*,*,#619,.F.);+#1596=ORIENTED_EDGE('',*,*,#629,.T.);+#1597=ORIENTED_EDGE('',*,*,#1598,.T.);+#1598=EDGE_CURVE('',#630,#1599,#1601,.T.);+#1599=VERTEX_POINT('',#1600);+#1600=CARTESIAN_POINT('',(2.148480775301,2.115,0.467364817767));+#1601=CIRCLE('',#1602,1.E-01);+#1602=AXIS2_PLACEMENT_3D('',#1603,#60,#1604);+#1603=CARTESIAN_POINT('',(2.05,2.115,0.45));+#1604=DIRECTION('',(-4.440892098501E-15,-4.930380657631E-31,1.));+#1605=ORIENTED_EDGE('',*,*,#1606,.T.);+#1606=EDGE_CURVE('',#1599,#1607,#1609,.T.);+#1607=VERTEX_POINT('',#1608);+#1608=CARTESIAN_POINT('',(2.197120194575,2.115,0.165270364467));+#1609=LINE('',#1600,#1610);+#1610=VECTOR('',#1611,1.);+#1611=DIRECTION('',(0.158960115908,1.764811806781E-17,-0.987285005229));+#1612=ORIENTED_EDGE('',*,*,#1613,.T.);+#1613=EDGE_CURVE('',#1607,#1614,#1616,.T.);+#1614=VERTEX_POINT('',#1615);+#1615=CARTESIAN_POINT('',(2.394081745177,2.115,-1.110223024625E-16));+#1616=CIRCLE('',#1617,0.2);+#1617=AXIS2_PLACEMENT_3D('',#1618,#88,#1619);+#1618=CARTESIAN_POINT('',(2.394081745177,2.115,0.2));+#1619=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#1620=ORIENTED_EDGE('',*,*,#1621,.T.);+#1621=EDGE_CURVE('',#1614,#1622,#1624,.T.);+#1622=VERTEX_POINT('',#1623);+#1623=CARTESIAN_POINT('',(3.15,2.115,-1.110223024625E-16));+#1624=LINE('',#1615,#27);+#1625=ORIENTED_EDGE('',*,*,#1626,.T.);+#1626=EDGE_CURVE('',#1622,#1627,#1629,.T.);+#1627=VERTEX_POINT('',#1628);+#1628=CARTESIAN_POINT('',(3.15,2.115,1.E-01));+#1629=LINE('',#1623,#304);+#1630=ORIENTED_EDGE('',*,*,#1631,.T.);+#1631=EDGE_CURVE('',#1627,#1632,#1634,.T.);+#1632=VERTEX_POINT('',#1633);+#1633=CARTESIAN_POINT('',(2.394081745177,2.115,1.E-01));+#1634=LINE('',#1628,#73);+#1635=ORIENTED_EDGE('',*,*,#1636,.T.);+#1636=EDGE_CURVE('',#1632,#1637,#1639,.T.);+#1637=VERTEX_POINT('',#1638);+#1638=CARTESIAN_POINT('',(2.295600969876,2.115,0.182635182233));+#1639=CIRCLE('',#1640,1.E-01);+#1640=AXIS2_PLACEMENT_3D('',#1618,#60,#1641);+#1641=DIRECTION('',(4.440892098501E-15,4.930380657631E-31,-1.));+#1642=ORIENTED_EDGE('',*,*,#1643,.T.);+#1643=EDGE_CURVE('',#1637,#1644,#1646,.T.);+#1644=VERTEX_POINT('',#1645);+#1645=CARTESIAN_POINT('',(2.246961550602,2.115,0.484729635533));+#1646=LINE('',#1638,#1647);+#1647=VECTOR('',#1648,1.);+#1648=DIRECTION('',(-0.158960115908,-1.764811806781E-17,0.987285005229));+#1649=ORIENTED_EDGE('',*,*,#1650,.T.);+#1650=EDGE_CURVE('',#1644,#991,#1651,.T.);+#1651=CIRCLE('',#1652,0.2);+#1652=AXIS2_PLACEMENT_3D('',#1603,#88,#1653);+#1653=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#1654=ORIENTED_EDGE('',*,*,#990,.T.);+#1655=PLANE('',#1656);+#1656=AXIS2_PLACEMENT_3D('',#1657,#88,#13);+#1657=CARTESIAN_POINT('',(2.422800780068,2.115,0.248849690266));+#1658=ADVANCED_FACE('',(#1659),#1673,.F.);+#1659=FACE_BOUND('',#1660,.F.);+#1660=EDGE_LOOP('',(#1661,#1662,#1669,#1672));+#1661=ORIENTED_EDGE('',*,*,#642,.T.);+#1662=ORIENTED_EDGE('',*,*,#1663,.T.);+#1663=EDGE_CURVE('',#637,#1664,#1666,.T.);+#1664=VERTEX_POINT('',#1665);+#1665=CARTESIAN_POINT('',(2.148480775301,1.695,0.467364817767));+#1666=CIRCLE('',#1667,1.E-01);+#1667=AXIS2_PLACEMENT_3D('',#1668,#60,#1604);+#1668=CARTESIAN_POINT('',(2.05,1.695,0.45));+#1669=ORIENTED_EDGE('',*,*,#1670,.F.);+#1670=EDGE_CURVE('',#1599,#1664,#1671,.T.);+#1671=LINE('',#1600,#87);+#1672=ORIENTED_EDGE('',*,*,#1598,.F.);+#1673=CYLINDRICAL_SURFACE('',#1602,1.E-01);+#1674=ADVANCED_FACE('',(#1675),#1719,.T.);+#1675=FACE_BOUND('',#1676,.T.);+#1676=EDGE_LOOP('',(#649,#635,#1662,#1677,#1682,#1689,#1694,#1699,#1704,#1710,#1715,#997));+#1677=ORIENTED_EDGE('',*,*,#1678,.T.);+#1678=EDGE_CURVE('',#1664,#1679,#1681,.T.);+#1679=VERTEX_POINT('',#1680);+#1680=CARTESIAN_POINT('',(2.197120194575,1.695,0.165270364467));+#1681=LINE('',#1665,#1610);+#1682=ORIENTED_EDGE('',*,*,#1683,.T.);+#1683=EDGE_CURVE('',#1679,#1684,#1686,.T.);+#1684=VERTEX_POINT('',#1685);+#1685=CARTESIAN_POINT('',(2.394081745177,1.695,-1.110223024625E-16));+#1686=CIRCLE('',#1687,0.2);+#1687=AXIS2_PLACEMENT_3D('',#1688,#88,#1619);+#1688=CARTESIAN_POINT('',(2.394081745177,1.695,0.2));+#1689=ORIENTED_EDGE('',*,*,#1690,.T.);+#1690=EDGE_CURVE('',#1684,#1691,#1693,.T.);+#1691=VERTEX_POINT('',#1692);+#1692=CARTESIAN_POINT('',(3.15,1.695,-1.110223024625E-16));+#1693=LINE('',#1685,#27);+#1694=ORIENTED_EDGE('',*,*,#1695,.T.);+#1695=EDGE_CURVE('',#1691,#1696,#1698,.T.);+#1696=VERTEX_POINT('',#1697);+#1697=CARTESIAN_POINT('',(3.15,1.695,1.E-01));+#1698=LINE('',#1692,#304);+#1699=ORIENTED_EDGE('',*,*,#1700,.T.);+#1700=EDGE_CURVE('',#1696,#1701,#1703,.T.);+#1701=VERTEX_POINT('',#1702);+#1702=CARTESIAN_POINT('',(2.394081745177,1.695,1.E-01));+#1703=LINE('',#1697,#73);+#1704=ORIENTED_EDGE('',*,*,#1705,.T.);+#1705=EDGE_CURVE('',#1701,#1706,#1708,.T.);+#1706=VERTEX_POINT('',#1707);+#1707=CARTESIAN_POINT('',(2.295600969876,1.695,0.182635182233));+#1708=CIRCLE('',#1709,1.E-01);+#1709=AXIS2_PLACEMENT_3D('',#1688,#60,#1641);+#1710=ORIENTED_EDGE('',*,*,#1711,.T.);+#1711=EDGE_CURVE('',#1706,#1712,#1714,.T.);+#1712=VERTEX_POINT('',#1713);+#1713=CARTESIAN_POINT('',(2.246961550602,1.695,0.484729635533));+#1714=LINE('',#1707,#1647);+#1715=ORIENTED_EDGE('',*,*,#1716,.T.);+#1716=EDGE_CURVE('',#1712,#994,#1717,.T.);+#1717=CIRCLE('',#1718,0.2);+#1718=AXIS2_PLACEMENT_3D('',#1668,#88,#1653);+#1719=PLANE('',#1720);+#1720=AXIS2_PLACEMENT_3D('',#1721,#88,#13);+#1721=CARTESIAN_POINT('',(2.422800780068,1.695,0.248849690266));+#1722=ADVANCED_FACE('',(#1723),#427,.F.);+#1723=FACE_BOUND('',#1724,.F.);+#1724=EDGE_LOOP('',(#1725,#1726,#1727,#1731));+#1725=ORIENTED_EDGE('',*,*,#1001,.F.);+#1726=ORIENTED_EDGE('',*,*,#663,.T.);+#1727=ORIENTED_EDGE('',*,*,#1728,.T.);+#1728=EDGE_CURVE('',#658,#950,#1729,.T.);+#1729=LINE('',#1730,#73);+#1730=CARTESIAN_POINT('',(2.05,0.845,0.65));+#1731=ORIENTED_EDGE('',*,*,#949,.F.);+#1732=ADVANCED_FACE('',(#1733),#1789,.F.);+#1733=FACE_BOUND('',#1734,.F.);+#1734=EDGE_LOOP('',(#1735,#1736,#1737,#1744,#1749,#1756,#1761,#1766,#1771,#1777,#1782,#1787));+#1735=ORIENTED_EDGE('',*,*,#657,.F.);+#1736=ORIENTED_EDGE('',*,*,#668,.T.);+#1737=ORIENTED_EDGE('',*,*,#1738,.T.);+#1738=EDGE_CURVE('',#669,#1739,#1741,.T.);+#1739=VERTEX_POINT('',#1740);+#1740=CARTESIAN_POINT('',(2.148480775301,0.845,0.467364817767));+#1741=CIRCLE('',#1742,1.E-01);+#1742=AXIS2_PLACEMENT_3D('',#1743,#60,#1604);+#1743=CARTESIAN_POINT('',(2.05,0.845,0.45));+#1744=ORIENTED_EDGE('',*,*,#1745,.T.);+#1745=EDGE_CURVE('',#1739,#1746,#1748,.T.);+#1746=VERTEX_POINT('',#1747);+#1747=CARTESIAN_POINT('',(2.197120194575,0.845,0.165270364467));+#1748=LINE('',#1740,#1610);+#1749=ORIENTED_EDGE('',*,*,#1750,.T.);+#1750=EDGE_CURVE('',#1746,#1751,#1753,.T.);+#1751=VERTEX_POINT('',#1752);+#1752=CARTESIAN_POINT('',(2.394081745177,0.845,-1.110223024625E-16));+#1753=CIRCLE('',#1754,0.2);+#1754=AXIS2_PLACEMENT_3D('',#1755,#88,#1619);+#1755=CARTESIAN_POINT('',(2.394081745177,0.845,0.2));+#1756=ORIENTED_EDGE('',*,*,#1757,.T.);+#1757=EDGE_CURVE('',#1751,#1758,#1760,.T.);+#1758=VERTEX_POINT('',#1759);+#1759=CARTESIAN_POINT('',(3.15,0.845,-1.110223024625E-16));+#1760=LINE('',#1752,#27);+#1761=ORIENTED_EDGE('',*,*,#1762,.T.);+#1762=EDGE_CURVE('',#1758,#1763,#1765,.T.);+#1763=VERTEX_POINT('',#1764);+#1764=CARTESIAN_POINT('',(3.15,0.845,1.E-01));+#1765=LINE('',#1759,#304);+#1766=ORIENTED_EDGE('',*,*,#1767,.T.);+#1767=EDGE_CURVE('',#1763,#1768,#1770,.T.);+#1768=VERTEX_POINT('',#1769);+#1769=CARTESIAN_POINT('',(2.394081745177,0.845,1.E-01));+#1770=LINE('',#1764,#73);+#1771=ORIENTED_EDGE('',*,*,#1772,.T.);+#1772=EDGE_CURVE('',#1768,#1773,#1775,.T.);+#1773=VERTEX_POINT('',#1774);+#1774=CARTESIAN_POINT('',(2.295600969876,0.845,0.182635182233));+#1775=CIRCLE('',#1776,1.E-01);+#1776=AXIS2_PLACEMENT_3D('',#1755,#60,#1641);+#1777=ORIENTED_EDGE('',*,*,#1778,.T.);+#1778=EDGE_CURVE('',#1773,#1779,#1781,.T.);+#1779=VERTEX_POINT('',#1780);+#1780=CARTESIAN_POINT('',(2.246961550602,0.845,0.484729635533));+#1781=LINE('',#1774,#1647);+#1782=ORIENTED_EDGE('',*,*,#1783,.T.);+#1783=EDGE_CURVE('',#1779,#1784,#1785,.T.);+#1784=VERTEX_POINT('',#1730);+#1785=CIRCLE('',#1786,0.2);+#1786=AXIS2_PLACEMENT_3D('',#1743,#88,#1653);+#1787=ORIENTED_EDGE('',*,*,#1788,.T.);+#1788=EDGE_CURVE('',#1784,#658,#1729,.T.);+#1789=PLANE('',#1790);+#1790=AXIS2_PLACEMENT_3D('',#1791,#88,#13);+#1791=CARTESIAN_POINT('',(2.422800780068,0.845,0.248849690266));+#1792=ADVANCED_FACE('',(#1793),#1807,.F.);+#1793=FACE_BOUND('',#1794,.F.);+#1794=EDGE_LOOP('',(#1795,#1796,#1803,#1806));+#1795=ORIENTED_EDGE('',*,*,#681,.T.);+#1796=ORIENTED_EDGE('',*,*,#1797,.T.);+#1797=EDGE_CURVE('',#676,#1798,#1800,.T.);+#1798=VERTEX_POINT('',#1799);+#1799=CARTESIAN_POINT('',(2.148480775301,0.425,0.467364817767));+#1800=CIRCLE('',#1801,1.E-01);+#1801=AXIS2_PLACEMENT_3D('',#1802,#60,#1604);+#1802=CARTESIAN_POINT('',(2.05,0.425,0.45));+#1803=ORIENTED_EDGE('',*,*,#1804,.F.);+#1804=EDGE_CURVE('',#1739,#1798,#1805,.T.);+#1805=LINE('',#1740,#87);+#1806=ORIENTED_EDGE('',*,*,#1738,.F.);+#1807=CYLINDRICAL_SURFACE('',#1742,1.E-01);+#1808=ADVANCED_FACE('',(#1809),#1858,.T.);+#1809=FACE_BOUND('',#1810,.T.);+#1810=EDGE_LOOP('',(#688,#674,#1796,#1811,#1816,#1823,#1828,#1833,#1838,#1844,#1849,#1855));+#1811=ORIENTED_EDGE('',*,*,#1812,.T.);+#1812=EDGE_CURVE('',#1798,#1813,#1815,.T.);+#1813=VERTEX_POINT('',#1814);+#1814=CARTESIAN_POINT('',(2.197120194575,0.425,0.165270364467));+#1815=LINE('',#1799,#1610);+#1816=ORIENTED_EDGE('',*,*,#1817,.T.);+#1817=EDGE_CURVE('',#1813,#1818,#1820,.T.);+#1818=VERTEX_POINT('',#1819);+#1819=CARTESIAN_POINT('',(2.394081745177,0.425,-1.110223024625E-16));+#1820=CIRCLE('',#1821,0.2);+#1821=AXIS2_PLACEMENT_3D('',#1822,#88,#1619);+#1822=CARTESIAN_POINT('',(2.394081745177,0.425,0.2));+#1823=ORIENTED_EDGE('',*,*,#1824,.T.);+#1824=EDGE_CURVE('',#1818,#1825,#1827,.T.);+#1825=VERTEX_POINT('',#1826);+#1826=CARTESIAN_POINT('',(3.15,0.425,-1.110223024625E-16));+#1827=LINE('',#1819,#27);+#1828=ORIENTED_EDGE('',*,*,#1829,.T.);+#1829=EDGE_CURVE('',#1825,#1830,#1832,.T.);+#1830=VERTEX_POINT('',#1831);+#1831=CARTESIAN_POINT('',(3.15,0.425,1.E-01));+#1832=LINE('',#1826,#304);+#1833=ORIENTED_EDGE('',*,*,#1834,.T.);+#1834=EDGE_CURVE('',#1830,#1835,#1837,.T.);+#1835=VERTEX_POINT('',#1836);+#1836=CARTESIAN_POINT('',(2.394081745177,0.425,1.E-01));+#1837=LINE('',#1831,#73);+#1838=ORIENTED_EDGE('',*,*,#1839,.T.);+#1839=EDGE_CURVE('',#1835,#1840,#1842,.T.);+#1840=VERTEX_POINT('',#1841);+#1841=CARTESIAN_POINT('',(2.295600969876,0.425,0.182635182233));+#1842=CIRCLE('',#1843,1.E-01);+#1843=AXIS2_PLACEMENT_3D('',#1822,#60,#1641);+#1844=ORIENTED_EDGE('',*,*,#1845,.T.);+#1845=EDGE_CURVE('',#1840,#1846,#1848,.T.);+#1846=VERTEX_POINT('',#1847);+#1847=CARTESIAN_POINT('',(2.246961550602,0.425,0.484729635533));+#1848=LINE('',#1841,#1647);+#1849=ORIENTED_EDGE('',*,*,#1850,.T.);+#1850=EDGE_CURVE('',#1846,#1851,#1853,.T.);+#1851=VERTEX_POINT('',#1852);+#1852=CARTESIAN_POINT('',(2.05,0.425,0.65));+#1853=CIRCLE('',#1854,0.2);+#1854=AXIS2_PLACEMENT_3D('',#1802,#88,#1653);+#1855=ORIENTED_EDGE('',*,*,#1856,.T.);+#1856=EDGE_CURVE('',#1851,#690,#1857,.T.);+#1857=LINE('',#1852,#73);+#1858=PLANE('',#1859);+#1859=AXIS2_PLACEMENT_3D('',#1860,#88,#13);+#1860=CARTESIAN_POINT('',(2.422800780068,0.425,0.248849690266));+#1861=ADVANCED_FACE('',(#1862),#427,.F.);+#1862=FACE_BOUND('',#1863,.F.);+#1863=EDGE_LOOP('',(#1864,#1866,#1867,#1871));+#1864=ORIENTED_EDGE('',*,*,#1865,.F.);+#1865=EDGE_CURVE('',#690,#954,#1857,.T.);+#1866=ORIENTED_EDGE('',*,*,#702,.T.);+#1867=ORIENTED_EDGE('',*,*,#1868,.T.);+#1868=EDGE_CURVE('',#697,#958,#1869,.T.);+#1869=LINE('',#1870,#73);+#1870=CARTESIAN_POINT('',(2.05,-0.425,0.65));+#1871=ORIENTED_EDGE('',*,*,#957,.F.);+#1872=ADVANCED_FACE('',(#1873),#1929,.F.);+#1873=FACE_BOUND('',#1874,.F.);+#1874=EDGE_LOOP('',(#1875,#1876,#1877,#1884,#1889,#1896,#1901,#1906,#1911,#1917,#1922,#1927));+#1875=ORIENTED_EDGE('',*,*,#696,.F.);+#1876=ORIENTED_EDGE('',*,*,#707,.T.);+#1877=ORIENTED_EDGE('',*,*,#1878,.T.);+#1878=EDGE_CURVE('',#708,#1879,#1881,.T.);+#1879=VERTEX_POINT('',#1880);+#1880=CARTESIAN_POINT('',(2.148480775301,-0.425,0.467364817767));+#1881=CIRCLE('',#1882,1.E-01);+#1882=AXIS2_PLACEMENT_3D('',#1883,#60,#1604);+#1883=CARTESIAN_POINT('',(2.05,-0.425,0.45));+#1884=ORIENTED_EDGE('',*,*,#1885,.T.);+#1885=EDGE_CURVE('',#1879,#1886,#1888,.T.);+#1886=VERTEX_POINT('',#1887);+#1887=CARTESIAN_POINT('',(2.197120194575,-0.425,0.165270364467));+#1888=LINE('',#1880,#1610);+#1889=ORIENTED_EDGE('',*,*,#1890,.T.);+#1890=EDGE_CURVE('',#1886,#1891,#1893,.T.);+#1891=VERTEX_POINT('',#1892);+#1892=CARTESIAN_POINT('',(2.394081745177,-0.425,-1.110223024625E-16));+#1893=CIRCLE('',#1894,0.2);+#1894=AXIS2_PLACEMENT_3D('',#1895,#88,#1619);+#1895=CARTESIAN_POINT('',(2.394081745177,-0.425,0.2));+#1896=ORIENTED_EDGE('',*,*,#1897,.T.);+#1897=EDGE_CURVE('',#1891,#1898,#1900,.T.);+#1898=VERTEX_POINT('',#1899);+#1899=CARTESIAN_POINT('',(3.15,-0.425,-1.110223024625E-16));+#1900=LINE('',#1892,#27);+#1901=ORIENTED_EDGE('',*,*,#1902,.T.);+#1902=EDGE_CURVE('',#1898,#1903,#1905,.T.);+#1903=VERTEX_POINT('',#1904);+#1904=CARTESIAN_POINT('',(3.15,-0.425,1.E-01));+#1905=LINE('',#1899,#304);+#1906=ORIENTED_EDGE('',*,*,#1907,.T.);+#1907=EDGE_CURVE('',#1903,#1908,#1910,.T.);+#1908=VERTEX_POINT('',#1909);+#1909=CARTESIAN_POINT('',(2.394081745177,-0.425,1.E-01));+#1910=LINE('',#1904,#73);+#1911=ORIENTED_EDGE('',*,*,#1912,.T.);+#1912=EDGE_CURVE('',#1908,#1913,#1915,.T.);+#1913=VERTEX_POINT('',#1914);+#1914=CARTESIAN_POINT('',(2.295600969876,-0.425,0.182635182233));+#1915=CIRCLE('',#1916,1.E-01);+#1916=AXIS2_PLACEMENT_3D('',#1895,#60,#1641);+#1917=ORIENTED_EDGE('',*,*,#1918,.T.);+#1918=EDGE_CURVE('',#1913,#1919,#1921,.T.);+#1919=VERTEX_POINT('',#1920);+#1920=CARTESIAN_POINT('',(2.246961550602,-0.425,0.484729635533));+#1921=LINE('',#1914,#1647);+#1922=ORIENTED_EDGE('',*,*,#1923,.T.);+#1923=EDGE_CURVE('',#1919,#1924,#1925,.T.);+#1924=VERTEX_POINT('',#1870);+#1925=CIRCLE('',#1926,0.2);+#1926=AXIS2_PLACEMENT_3D('',#1883,#88,#1653);+#1927=ORIENTED_EDGE('',*,*,#1928,.T.);+#1928=EDGE_CURVE('',#1924,#697,#1869,.T.);+#1929=PLANE('',#1930);+#1930=AXIS2_PLACEMENT_3D('',#1931,#88,#13);+#1931=CARTESIAN_POINT('',(2.422800780068,-0.425,0.248849690266));+#1932=ADVANCED_FACE('',(#1933),#1947,.F.);+#1933=FACE_BOUND('',#1934,.F.);+#1934=EDGE_LOOP('',(#1935,#1936,#1943,#1946));+#1935=ORIENTED_EDGE('',*,*,#720,.T.);+#1936=ORIENTED_EDGE('',*,*,#1937,.T.);+#1937=EDGE_CURVE('',#715,#1938,#1940,.T.);+#1938=VERTEX_POINT('',#1939);+#1939=CARTESIAN_POINT('',(2.148480775301,-0.845,0.467364817767));+#1940=CIRCLE('',#1941,1.E-01);+#1941=AXIS2_PLACEMENT_3D('',#1942,#60,#1604);+#1942=CARTESIAN_POINT('',(2.05,-0.845,0.45));+#1943=ORIENTED_EDGE('',*,*,#1944,.F.);+#1944=EDGE_CURVE('',#1879,#1938,#1945,.T.);+#1945=LINE('',#1880,#87);+#1946=ORIENTED_EDGE('',*,*,#1878,.F.);+#1947=CYLINDRICAL_SURFACE('',#1882,1.E-01);+#1948=ADVANCED_FACE('',(#1949),#1998,.T.);+#1949=FACE_BOUND('',#1950,.T.);+#1950=EDGE_LOOP('',(#727,#713,#1936,#1951,#1956,#1963,#1968,#1973,#1978,#1984,#1989,#1995));+#1951=ORIENTED_EDGE('',*,*,#1952,.T.);+#1952=EDGE_CURVE('',#1938,#1953,#1955,.T.);+#1953=VERTEX_POINT('',#1954);+#1954=CARTESIAN_POINT('',(2.197120194575,-0.845,0.165270364467));+#1955=LINE('',#1939,#1610);+#1956=ORIENTED_EDGE('',*,*,#1957,.T.);+#1957=EDGE_CURVE('',#1953,#1958,#1960,.T.);+#1958=VERTEX_POINT('',#1959);+#1959=CARTESIAN_POINT('',(2.394081745177,-0.845,-1.110223024625E-16));+#1960=CIRCLE('',#1961,0.2);+#1961=AXIS2_PLACEMENT_3D('',#1962,#88,#1619);+#1962=CARTESIAN_POINT('',(2.394081745177,-0.845,0.2));+#1963=ORIENTED_EDGE('',*,*,#1964,.T.);+#1964=EDGE_CURVE('',#1958,#1965,#1967,.T.);+#1965=VERTEX_POINT('',#1966);+#1966=CARTESIAN_POINT('',(3.15,-0.845,-1.110223024625E-16));+#1967=LINE('',#1959,#27);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#1965,#1970,#1972,.T.);+#1970=VERTEX_POINT('',#1971);+#1971=CARTESIAN_POINT('',(3.15,-0.845,1.E-01));+#1972=LINE('',#1966,#304);+#1973=ORIENTED_EDGE('',*,*,#1974,.T.);+#1974=EDGE_CURVE('',#1970,#1975,#1977,.T.);+#1975=VERTEX_POINT('',#1976);+#1976=CARTESIAN_POINT('',(2.394081745177,-0.845,1.E-01));+#1977=LINE('',#1971,#73);+#1978=ORIENTED_EDGE('',*,*,#1979,.T.);+#1979=EDGE_CURVE('',#1975,#1980,#1982,.T.);+#1980=VERTEX_POINT('',#1981);+#1981=CARTESIAN_POINT('',(2.295600969876,-0.845,0.182635182233));+#1982=CIRCLE('',#1983,1.E-01);+#1983=AXIS2_PLACEMENT_3D('',#1962,#60,#1641);+#1984=ORIENTED_EDGE('',*,*,#1985,.T.);+#1985=EDGE_CURVE('',#1980,#1986,#1988,.T.);+#1986=VERTEX_POINT('',#1987);+#1987=CARTESIAN_POINT('',(2.246961550602,-0.845,0.484729635533));+#1988=LINE('',#1981,#1647);+#1989=ORIENTED_EDGE('',*,*,#1990,.T.);+#1990=EDGE_CURVE('',#1986,#1991,#1993,.T.);+#1991=VERTEX_POINT('',#1992);+#1992=CARTESIAN_POINT('',(2.05,-0.845,0.65));+#1993=CIRCLE('',#1994,0.2);+#1994=AXIS2_PLACEMENT_3D('',#1942,#88,#1653);+#1995=ORIENTED_EDGE('',*,*,#1996,.T.);+#1996=EDGE_CURVE('',#1991,#729,#1997,.T.);+#1997=LINE('',#1992,#73);+#1998=PLANE('',#1999);+#1999=AXIS2_PLACEMENT_3D('',#2000,#88,#13);+#2000=CARTESIAN_POINT('',(2.422800780068,-0.845,0.248849690266));+#2001=ADVANCED_FACE('',(#2002),#427,.F.);+#2002=FACE_BOUND('',#2003,.F.);+#2003=EDGE_LOOP('',(#2004,#2006,#2007,#2011));+#2004=ORIENTED_EDGE('',*,*,#2005,.F.);+#2005=EDGE_CURVE('',#729,#962,#1997,.T.);+#2006=ORIENTED_EDGE('',*,*,#741,.T.);+#2007=ORIENTED_EDGE('',*,*,#2008,.T.);+#2008=EDGE_CURVE('',#736,#966,#2009,.T.);+#2009=LINE('',#2010,#73);+#2010=CARTESIAN_POINT('',(2.05,-1.695,0.65));+#2011=ORIENTED_EDGE('',*,*,#965,.F.);+#2012=ADVANCED_FACE('',(#2013),#2069,.F.);+#2013=FACE_BOUND('',#2014,.F.);+#2014=EDGE_LOOP('',(#2015,#2016,#2017,#2024,#2029,#2036,#2041,#2046,#2051,#2057,#2062,#2067));+#2015=ORIENTED_EDGE('',*,*,#735,.F.);+#2016=ORIENTED_EDGE('',*,*,#746,.T.);+#2017=ORIENTED_EDGE('',*,*,#2018,.T.);+#2018=EDGE_CURVE('',#747,#2019,#2021,.T.);+#2019=VERTEX_POINT('',#2020);+#2020=CARTESIAN_POINT('',(2.148480775301,-1.695,0.467364817767));+#2021=CIRCLE('',#2022,1.E-01);+#2022=AXIS2_PLACEMENT_3D('',#2023,#60,#1604);+#2023=CARTESIAN_POINT('',(2.05,-1.695,0.45));+#2024=ORIENTED_EDGE('',*,*,#2025,.T.);+#2025=EDGE_CURVE('',#2019,#2026,#2028,.T.);+#2026=VERTEX_POINT('',#2027);+#2027=CARTESIAN_POINT('',(2.197120194575,-1.695,0.165270364467));+#2028=LINE('',#2020,#1610);+#2029=ORIENTED_EDGE('',*,*,#2030,.T.);+#2030=EDGE_CURVE('',#2026,#2031,#2033,.T.);+#2031=VERTEX_POINT('',#2032);+#2032=CARTESIAN_POINT('',(2.394081745177,-1.695,-1.110223024625E-16));+#2033=CIRCLE('',#2034,0.2);+#2034=AXIS2_PLACEMENT_3D('',#2035,#88,#1619);+#2035=CARTESIAN_POINT('',(2.394081745177,-1.695,0.2));+#2036=ORIENTED_EDGE('',*,*,#2037,.T.);+#2037=EDGE_CURVE('',#2031,#2038,#2040,.T.);+#2038=VERTEX_POINT('',#2039);+#2039=CARTESIAN_POINT('',(3.15,-1.695,-1.110223024625E-16));+#2040=LINE('',#2032,#27);+#2041=ORIENTED_EDGE('',*,*,#2042,.T.);+#2042=EDGE_CURVE('',#2038,#2043,#2045,.T.);+#2043=VERTEX_POINT('',#2044);+#2044=CARTESIAN_POINT('',(3.15,-1.695,1.E-01));+#2045=LINE('',#2039,#304);+#2046=ORIENTED_EDGE('',*,*,#2047,.T.);+#2047=EDGE_CURVE('',#2043,#2048,#2050,.T.);+#2048=VERTEX_POINT('',#2049);+#2049=CARTESIAN_POINT('',(2.394081745177,-1.695,1.E-01));+#2050=LINE('',#2044,#73);+#2051=ORIENTED_EDGE('',*,*,#2052,.T.);+#2052=EDGE_CURVE('',#2048,#2053,#2055,.T.);+#2053=VERTEX_POINT('',#2054);+#2054=CARTESIAN_POINT('',(2.295600969876,-1.695,0.182635182233));+#2055=CIRCLE('',#2056,1.E-01);+#2056=AXIS2_PLACEMENT_3D('',#2035,#60,#1641);+#2057=ORIENTED_EDGE('',*,*,#2058,.T.);+#2058=EDGE_CURVE('',#2053,#2059,#2061,.T.);+#2059=VERTEX_POINT('',#2060);+#2060=CARTESIAN_POINT('',(2.246961550602,-1.695,0.484729635533));+#2061=LINE('',#2054,#1647);+#2062=ORIENTED_EDGE('',*,*,#2063,.T.);+#2063=EDGE_CURVE('',#2059,#2064,#2065,.T.);+#2064=VERTEX_POINT('',#2010);+#2065=CIRCLE('',#2066,0.2);+#2066=AXIS2_PLACEMENT_3D('',#2023,#88,#1653);+#2067=ORIENTED_EDGE('',*,*,#2068,.T.);+#2068=EDGE_CURVE('',#2064,#736,#2009,.T.);+#2069=PLANE('',#2070);+#2070=AXIS2_PLACEMENT_3D('',#2071,#88,#13);+#2071=CARTESIAN_POINT('',(2.422800780068,-1.695,0.248849690266));+#2072=ADVANCED_FACE('',(#2073),#2087,.F.);+#2073=FACE_BOUND('',#2074,.F.);+#2074=EDGE_LOOP('',(#2075,#2076,#2083,#2086));+#2075=ORIENTED_EDGE('',*,*,#759,.T.);+#2076=ORIENTED_EDGE('',*,*,#2077,.T.);+#2077=EDGE_CURVE('',#754,#2078,#2080,.T.);+#2078=VERTEX_POINT('',#2079);+#2079=CARTESIAN_POINT('',(2.148480775301,-2.115,0.467364817767));+#2080=CIRCLE('',#2081,1.E-01);+#2081=AXIS2_PLACEMENT_3D('',#2082,#60,#1604);+#2082=CARTESIAN_POINT('',(2.05,-2.115,0.45));+#2083=ORIENTED_EDGE('',*,*,#2084,.F.);+#2084=EDGE_CURVE('',#2019,#2078,#2085,.T.);+#2085=LINE('',#2020,#87);+#2086=ORIENTED_EDGE('',*,*,#2018,.F.);+#2087=CYLINDRICAL_SURFACE('',#2022,1.E-01);+#2088=ADVANCED_FACE('',(#2089),#2136,.T.);+#2089=FACE_BOUND('',#2090,.T.);+#2090=EDGE_LOOP('',(#766,#752,#2076,#2091,#2096,#2103,#2108,#2113,#2118,#2124,#2129,#2134));+#2091=ORIENTED_EDGE('',*,*,#2092,.T.);+#2092=EDGE_CURVE('',#2078,#2093,#2095,.T.);+#2093=VERTEX_POINT('',#2094);+#2094=CARTESIAN_POINT('',(2.197120194575,-2.115,0.165270364467));+#2095=LINE('',#2079,#1610);+#2096=ORIENTED_EDGE('',*,*,#2097,.T.);+#2097=EDGE_CURVE('',#2093,#2098,#2100,.T.);+#2098=VERTEX_POINT('',#2099);+#2099=CARTESIAN_POINT('',(2.394081745177,-2.115,-1.110223024625E-16));+#2100=CIRCLE('',#2101,0.2);+#2101=AXIS2_PLACEMENT_3D('',#2102,#88,#1619);+#2102=CARTESIAN_POINT('',(2.394081745177,-2.115,0.2));+#2103=ORIENTED_EDGE('',*,*,#2104,.T.);+#2104=EDGE_CURVE('',#2098,#2105,#2107,.T.);+#2105=VERTEX_POINT('',#2106);+#2106=CARTESIAN_POINT('',(3.15,-2.115,-1.110223024625E-16));+#2107=LINE('',#2099,#27);+#2108=ORIENTED_EDGE('',*,*,#2109,.T.);+#2109=EDGE_CURVE('',#2105,#2110,#2112,.T.);+#2110=VERTEX_POINT('',#2111);+#2111=CARTESIAN_POINT('',(3.15,-2.115,1.E-01));+#2112=LINE('',#2106,#304);+#2113=ORIENTED_EDGE('',*,*,#2114,.T.);+#2114=EDGE_CURVE('',#2110,#2115,#2117,.T.);+#2115=VERTEX_POINT('',#2116);+#2116=CARTESIAN_POINT('',(2.394081745177,-2.115,1.E-01));+#2117=LINE('',#2111,#73);+#2118=ORIENTED_EDGE('',*,*,#2119,.T.);+#2119=EDGE_CURVE('',#2115,#2120,#2122,.T.);+#2120=VERTEX_POINT('',#2121);+#2121=CARTESIAN_POINT('',(2.295600969876,-2.115,0.182635182233));+#2122=CIRCLE('',#2123,1.E-01);+#2123=AXIS2_PLACEMENT_3D('',#2102,#60,#1641);+#2124=ORIENTED_EDGE('',*,*,#2125,.T.);+#2125=EDGE_CURVE('',#2120,#2126,#2128,.T.);+#2126=VERTEX_POINT('',#2127);+#2127=CARTESIAN_POINT('',(2.246961550602,-2.115,0.484729635533));+#2128=LINE('',#2121,#1647);+#2129=ORIENTED_EDGE('',*,*,#2130,.T.);+#2130=EDGE_CURVE('',#2126,#2131,#2132,.T.);+#2131=VERTEX_POINT('',#1032);+#2132=CIRCLE('',#2133,0.2);+#2133=AXIS2_PLACEMENT_3D('',#2082,#88,#1653);+#2134=ORIENTED_EDGE('',*,*,#2135,.T.);+#2135=EDGE_CURVE('',#2131,#768,#1031,.T.);+#2136=PLANE('',#2137);+#2137=AXIS2_PLACEMENT_3D('',#2138,#88,#13);+#2138=CARTESIAN_POINT('',(2.422800780068,-2.115,0.248849690266));+#2139=ADVANCED_FACE('',(#2140),#2147,.T.);+#2140=FACE_BOUND('',#2141,.F.);+#2141=EDGE_LOOP('',(#2142,#1585,#2145,#2146));+#2142=ORIENTED_EDGE('',*,*,#2143,.T.);+#2143=EDGE_CURVE('',#1516,#1582,#2144,.T.);+#2144=LINE('',#1517,#482);+#2145=ORIENTED_EDGE('',*,*,#837,.F.);+#2146=ORIENTED_EDGE('',*,*,#1520,.F.);+#2147=CYLINDRICAL_SURFACE('',#2148,0.2);+#2148=AXIS2_PLACEMENT_3D('',#1480,#1125,#1102);+#2149=ADVANCED_FACE('',(#2150),#2159,.F.);+#2150=FACE_BOUND('',#2151,.F.);+#2151=EDGE_LOOP('',(#2152,#2153,#1173,#2156,#2157,#2158));+#2152=ORIENTED_EDGE('',*,*,#1104,.F.);+#2153=ORIENTED_EDGE('',*,*,#2154,.T.);+#2154=EDGE_CURVE('',#1099,#1169,#2155,.T.);+#2155=LINE('',#1013,#482);+#2156=ORIENTED_EDGE('',*,*,#1189,.T.);+#2157=ORIENTED_EDGE('',*,*,#861,.F.);+#2158=ORIENTED_EDGE('',*,*,#1011,.F.);+#2159=PLANE('',#2160);+#2160=AXIS2_PLACEMENT_3D('',#1013,#851,#422);+#2161=ADVANCED_FACE('',(#2162),#2171,.F.);+#2162=FACE_BOUND('',#2163,.F.);+#2163=EDGE_LOOP('',(#2164,#2165,#1314,#2168,#2169,#2170));+#2164=ORIENTED_EDGE('',*,*,#1246,.F.);+#2165=ORIENTED_EDGE('',*,*,#2166,.T.);+#2166=EDGE_CURVE('',#1242,#1310,#2167,.T.);+#2167=LINE('',#1186,#482);+#2168=ORIENTED_EDGE('',*,*,#1330,.T.);+#2169=ORIENTED_EDGE('',*,*,#869,.F.);+#2170=ORIENTED_EDGE('',*,*,#1184,.F.);+#2171=PLANE('',#2172);+#2172=AXIS2_PLACEMENT_3D('',#1186,#851,#422);+#2173=ADVANCED_FACE('',(#2174),#2183,.F.);+#2174=FACE_BOUND('',#2175,.F.);+#2175=EDGE_LOOP('',(#2176,#2177,#1455,#2180,#2181,#2182));+#2176=ORIENTED_EDGE('',*,*,#1387,.F.);+#2177=ORIENTED_EDGE('',*,*,#2178,.T.);+#2178=EDGE_CURVE('',#1383,#1451,#2179,.T.);+#2179=LINE('',#1327,#482);+#2180=ORIENTED_EDGE('',*,*,#1468,.T.);+#2181=ORIENTED_EDGE('',*,*,#877,.F.);+#2182=ORIENTED_EDGE('',*,*,#1325,.F.);+#2183=PLANE('',#2184);+#2184=AXIS2_PLACEMENT_3D('',#1327,#851,#422);+#2185=ADVANCED_FACE('',(#2186,#2201),#2211,.T.);+#2186=FACE_BOUND('',#2187,.T.);+#2187=EDGE_LOOP('',(#921,#907,#889,#2188,#2193,#2198,#981,#935));+#2188=ORIENTED_EDGE('',*,*,#2189,.F.);+#2189=EDGE_CURVE('',#2190,#891,#2192,.T.);+#2190=VERTEX_POINT('',#2191);+#2191=CARTESIAN_POINT('',(-1.701863500927,-2.303727001854,1.1));+#2192=LINE('',#2191,#66);+#2193=ORIENTED_EDGE('',*,*,#2194,.F.);+#2194=EDGE_CURVE('',#2195,#2190,#2197,.T.);+#2195=VERTEX_POINT('',#2196);+#2196=CARTESIAN_POINT('',(1.701863500927,-2.303727001854,1.1));+#2197=LINE('',#2196,#73);+#2198=ORIENTED_EDGE('',*,*,#2199,.F.);+#2199=EDGE_CURVE('',#978,#2195,#2200,.T.);+#2200=LINE('',#979,#80);+#2201=FACE_BOUND('',#2202,.T.);+#2202=EDGE_LOOP('',(#2203));+#2203=ORIENTED_EDGE('',*,*,#2204,.T.);+#2204=EDGE_CURVE('',#2205,#2205,#2207,.T.);+#2205=VERTEX_POINT('',#2206);+#2206=CARTESIAN_POINT('',(-1.303727001854,1.703727001854,1.1));+#2207=CIRCLE('',#2208,0.1);+#2208=AXIS2_PLACEMENT_3D('',#2209,#2210,#88);+#2209=CARTESIAN_POINT('',(-1.303727001854,1.803727001854,1.1));+#2210=DIRECTION('',(0.,-0.,-1.));+#2211=PLANE('',#2212);+#2212=AXIS2_PLACEMENT_3D('',#905,#13,#2213);+#2213=DIRECTION('',(0.594189810353,-0.804324853074,0.));+#2214=ADVANCED_FACE('',(#2215),#2222,.F.);+#2215=FACE_BOUND('',#2216,.F.);+#2216=EDGE_LOOP('',(#2217,#2218,#2188,#2219));+#2217=ORIENTED_EDGE('',*,*,#1016,.T.);+#2218=ORIENTED_EDGE('',*,*,#895,.T.);+#2219=ORIENTED_EDGE('',*,*,#2220,.F.);+#2220=EDGE_CURVE('',#1017,#2190,#2221,.T.);+#2221=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1018,#2191),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2222=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1018,#2191),(#414,#892)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2223=ADVANCED_FACE('',(#2224),#2233,.F.);+#2224=FACE_BOUND('',#2225,.F.);+#2225=EDGE_LOOP('',(#2226,#2227,#1855,#2230,#2231,#2232));+#2226=ORIENTED_EDGE('',*,*,#1788,.F.);+#2227=ORIENTED_EDGE('',*,*,#2228,.T.);+#2228=EDGE_CURVE('',#1784,#1851,#2229,.T.);+#2229=LINE('',#1730,#87);+#2230=ORIENTED_EDGE('',*,*,#1865,.T.);+#2231=ORIENTED_EDGE('',*,*,#953,.F.);+#2232=ORIENTED_EDGE('',*,*,#1728,.F.);+#2233=PLANE('',#2234);+#2234=AXIS2_PLACEMENT_3D('',#1730,#851,#74);+#2235=ADVANCED_FACE('',(#2236),#2245,.F.);+#2236=FACE_BOUND('',#2237,.F.);+#2237=EDGE_LOOP('',(#2238,#2239,#1995,#2242,#2243,#2244));+#2238=ORIENTED_EDGE('',*,*,#1928,.F.);+#2239=ORIENTED_EDGE('',*,*,#2240,.T.);+#2240=EDGE_CURVE('',#1924,#1991,#2241,.T.);+#2241=LINE('',#1870,#87);+#2242=ORIENTED_EDGE('',*,*,#2005,.T.);+#2243=ORIENTED_EDGE('',*,*,#961,.F.);+#2244=ORIENTED_EDGE('',*,*,#1868,.F.);+#2245=PLANE('',#2246);+#2246=AXIS2_PLACEMENT_3D('',#1870,#851,#74);+#2247=ADVANCED_FACE('',(#2248),#2257,.F.);+#2248=FACE_BOUND('',#2249,.F.);+#2249=EDGE_LOOP('',(#2250,#2251,#2134,#2254,#2255,#2256));+#2250=ORIENTED_EDGE('',*,*,#2068,.F.);+#2251=ORIENTED_EDGE('',*,*,#2252,.T.);+#2252=EDGE_CURVE('',#2064,#2131,#2253,.T.);+#2253=LINE('',#2010,#87);+#2254=ORIENTED_EDGE('',*,*,#1030,.T.);+#2255=ORIENTED_EDGE('',*,*,#969,.F.);+#2256=ORIENTED_EDGE('',*,*,#2008,.F.);+#2257=PLANE('',#2258);+#2258=AXIS2_PLACEMENT_3D('',#2010,#851,#74);+#2259=ADVANCED_FACE('',(#2260),#2267,.F.);+#2260=FACE_BOUND('',#2261,.F.);+#2261=EDGE_LOOP('',(#2262,#2263,#2198,#2266));+#2262=ORIENTED_EDGE('',*,*,#1026,.T.);+#2263=ORIENTED_EDGE('',*,*,#2264,.T.);+#2264=EDGE_CURVE('',#1022,#2195,#2265,.T.);+#2265=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1023,#2196),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2266=ORIENTED_EDGE('',*,*,#977,.F.);+#2267=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#975,#979),(#1023,#2196)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2268=ADVANCED_FACE('',(#2269),#2276,.T.);+#2269=FACE_BOUND('',#2270,.F.);+#2270=EDGE_LOOP('',(#2271,#1715,#2274,#2275));+#2271=ORIENTED_EDGE('',*,*,#2272,.T.);+#2272=EDGE_CURVE('',#1644,#1712,#2273,.T.);+#2273=LINE('',#1645,#87);+#2274=ORIENTED_EDGE('',*,*,#993,.F.);+#2275=ORIENTED_EDGE('',*,*,#1650,.F.);+#2276=CYLINDRICAL_SURFACE('',#2277,0.2);+#2277=AXIS2_PLACEMENT_3D('',#1603,#60,#1653);+#2278=ADVANCED_FACE('',(#2279),#2284,.F.);+#2279=FACE_BOUND('',#2280,.F.);+#2280=EDGE_LOOP('',(#2281,#2282,#2193,#2283));+#2281=ORIENTED_EDGE('',*,*,#1021,.T.);+#2282=ORIENTED_EDGE('',*,*,#2220,.T.);+#2283=ORIENTED_EDGE('',*,*,#2264,.F.);+#2284=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1023,#2196),(#1018,#2191)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2285=ADVANCED_FACE('',(#2286),#2293,.T.);+#2286=FACE_BOUND('',#2287,.F.);+#2287=EDGE_LOOP('',(#2288,#1167,#2291,#2292));+#2288=ORIENTED_EDGE('',*,*,#2289,.T.);+#2289=EDGE_CURVE('',#1092,#1164,#2290,.T.);+#2290=LINE('',#1093,#482);+#2291=ORIENTED_EDGE('',*,*,#2154,.F.);+#2292=ORIENTED_EDGE('',*,*,#1098,.F.);+#2293=CYLINDRICAL_SURFACE('',#2294,0.2);+#2294=AXIS2_PLACEMENT_3D('',#1048,#1125,#1102);+#2295=ADVANCED_FACE('',(#2296),#2303,.F.);+#2296=FACE_BOUND('',#2297,.F.);+#2297=EDGE_LOOP('',(#2298,#1162,#2301,#2302));+#2298=ORIENTED_EDGE('',*,*,#2299,.T.);+#2299=EDGE_CURVE('',#1084,#1158,#2300,.T.);+#2300=LINE('',#1085,#482);+#2301=ORIENTED_EDGE('',*,*,#2289,.F.);+#2302=ORIENTED_EDGE('',*,*,#1091,.F.);+#2303=PLANE('',#2304);+#2304=AXIS2_PLACEMENT_3D('',#1085,#2305,#1096);+#2305=DIRECTION('',(0.987285005229,-1.129688768275E-17,-0.158960115908));+#2306=ADVANCED_FACE('',(#2307),#2314,.F.);+#2307=FACE_BOUND('',#2308,.F.);+#2308=EDGE_LOOP('',(#2309,#1156,#2312,#2313));+#2309=ORIENTED_EDGE('',*,*,#2310,.T.);+#2310=EDGE_CURVE('',#1079,#1153,#2311,.T.);+#2311=LINE('',#1080,#482);+#2312=ORIENTED_EDGE('',*,*,#2299,.F.);+#2313=ORIENTED_EDGE('',*,*,#1083,.F.);+#2314=CYLINDRICAL_SURFACE('',#2315,1.E-01);+#2315=AXIS2_PLACEMENT_3D('',#1064,#1125,#1089);+#2316=ADVANCED_FACE('',(#2317),#2324,.F.);+#2317=FACE_BOUND('',#2318,.F.);+#2318=EDGE_LOOP('',(#2319,#1151,#2322,#2323));+#2319=ORIENTED_EDGE('',*,*,#2320,.T.);+#2320=EDGE_CURVE('',#1074,#1148,#2321,.T.);+#2321=LINE('',#1075,#482);+#2322=ORIENTED_EDGE('',*,*,#2310,.F.);+#2323=ORIENTED_EDGE('',*,*,#1078,.F.);+#2324=PLANE('',#2325);+#2325=AXIS2_PLACEMENT_3D('',#1075,#851,#422);+#2326=ADVANCED_FACE('',(#2327),#2334,.F.);+#2327=FACE_BOUND('',#2328,.F.);+#2328=EDGE_LOOP('',(#2329,#1146,#2332,#2333));+#2329=ORIENTED_EDGE('',*,*,#2330,.T.);+#2330=EDGE_CURVE('',#1069,#1143,#2331,.T.);+#2331=LINE('',#1070,#482);+#2332=ORIENTED_EDGE('',*,*,#2320,.F.);+#2333=ORIENTED_EDGE('',*,*,#1073,.F.);+#2334=PLANE('',#2335);+#2335=AXIS2_PLACEMENT_3D('',#1070,#422,#13);+#2336=ADVANCED_FACE('',(#2337),#2344,.F.);+#2337=FACE_BOUND('',#2338,.F.);+#2338=EDGE_LOOP('',(#2339,#1141,#2342,#2343));+#2339=ORIENTED_EDGE('',*,*,#2340,.T.);+#2340=EDGE_CURVE('',#1060,#1136,#2341,.T.);+#2341=LINE('',#1061,#482);+#2342=ORIENTED_EDGE('',*,*,#2330,.F.);+#2343=ORIENTED_EDGE('',*,*,#1068,.F.);+#2344=PLANE('',#2345);+#2345=AXIS2_PLACEMENT_3D('',#1061,#13,#471);+#2346=ADVANCED_FACE('',(#2347),#2354,.T.);+#2347=FACE_BOUND('',#2348,.F.);+#2348=EDGE_LOOP('',(#2349,#1134,#2352,#2353));+#2349=ORIENTED_EDGE('',*,*,#2350,.T.);+#2350=EDGE_CURVE('',#1053,#1131,#2351,.T.);+#2351=LINE('',#1054,#482);+#2352=ORIENTED_EDGE('',*,*,#2340,.F.);+#2353=ORIENTED_EDGE('',*,*,#1059,.F.);+#2354=CYLINDRICAL_SURFACE('',#2355,0.2);+#2355=AXIS2_PLACEMENT_3D('',#1064,#1125,#1066);+#2356=ADVANCED_FACE('',(#2357),#2362,.F.);+#2357=FACE_BOUND('',#2358,.F.);+#2358=EDGE_LOOP('',(#2359,#1129,#2360,#2361));+#2359=ORIENTED_EDGE('',*,*,#1120,.T.);+#2360=ORIENTED_EDGE('',*,*,#2350,.F.);+#2361=ORIENTED_EDGE('',*,*,#1052,.F.);+#2362=PLANE('',#2363);+#2363=AXIS2_PLACEMENT_3D('',#1045,#2364,#1057);+#2364=DIRECTION('',(-0.987285005229,1.129688768275E-17,0.158960115908));+#2365=ADVANCED_FACE('',(#2366),#2373,.T.);+#2366=FACE_BOUND('',#2367,.F.);+#2367=EDGE_LOOP('',(#2368,#1308,#2371,#2372));+#2368=ORIENTED_EDGE('',*,*,#2369,.T.);+#2369=EDGE_CURVE('',#1237,#1305,#2370,.T.);+#2370=LINE('',#1238,#482);+#2371=ORIENTED_EDGE('',*,*,#2166,.F.);+#2372=ORIENTED_EDGE('',*,*,#1241,.F.);+#2373=CYLINDRICAL_SURFACE('',#2374,0.2);+#2374=AXIS2_PLACEMENT_3D('',#1201,#1125,#1102);+#2375=ADVANCED_FACE('',(#2376),#2383,.F.);+#2376=FACE_BOUND('',#2377,.F.);+#2377=EDGE_LOOP('',(#2378,#1303,#2381,#2382));+#2378=ORIENTED_EDGE('',*,*,#2379,.T.);+#2379=EDGE_CURVE('',#1231,#1299,#2380,.T.);+#2380=LINE('',#1232,#482);+#2381=ORIENTED_EDGE('',*,*,#2369,.F.);+#2382=ORIENTED_EDGE('',*,*,#1236,.F.);+#2383=PLANE('',#2384);+#2384=AXIS2_PLACEMENT_3D('',#1232,#2305,#1096);+#2385=ADVANCED_FACE('',(#2386),#2393,.F.);+#2386=FACE_BOUND('',#2387,.F.);+#2387=EDGE_LOOP('',(#2388,#1297,#2391,#2392));+#2388=ORIENTED_EDGE('',*,*,#2389,.T.);+#2389=EDGE_CURVE('',#1226,#1294,#2390,.T.);+#2390=LINE('',#1227,#482);+#2391=ORIENTED_EDGE('',*,*,#2379,.F.);+#2392=ORIENTED_EDGE('',*,*,#1230,.F.);+#2393=CYLINDRICAL_SURFACE('',#2394,1.E-01);+#2394=AXIS2_PLACEMENT_3D('',#1213,#1125,#1089);+#2395=ADVANCED_FACE('',(#2396),#2403,.F.);+#2396=FACE_BOUND('',#2397,.F.);+#2397=EDGE_LOOP('',(#2398,#1292,#2401,#2402));+#2398=ORIENTED_EDGE('',*,*,#2399,.T.);+#2399=EDGE_CURVE('',#1221,#1289,#2400,.T.);+#2400=LINE('',#1222,#482);+#2401=ORIENTED_EDGE('',*,*,#2389,.F.);+#2402=ORIENTED_EDGE('',*,*,#1225,.F.);+#2403=PLANE('',#2404);+#2404=AXIS2_PLACEMENT_3D('',#1222,#851,#422);+#2405=ADVANCED_FACE('',(#2406),#2413,.F.);+#2406=FACE_BOUND('',#2407,.F.);+#2407=EDGE_LOOP('',(#2408,#1287,#2411,#2412));+#2408=ORIENTED_EDGE('',*,*,#2409,.T.);+#2409=EDGE_CURVE('',#1216,#1284,#2410,.T.);+#2410=LINE('',#1217,#482);+#2411=ORIENTED_EDGE('',*,*,#2399,.F.);+#2412=ORIENTED_EDGE('',*,*,#1220,.F.);+#2413=PLANE('',#2414);+#2414=AXIS2_PLACEMENT_3D('',#1217,#422,#13);+#2415=ADVANCED_FACE('',(#2416),#2423,.F.);+#2416=FACE_BOUND('',#2417,.F.);+#2417=EDGE_LOOP('',(#2418,#1282,#2421,#2422));+#2418=ORIENTED_EDGE('',*,*,#2419,.T.);+#2419=EDGE_CURVE('',#1209,#1277,#2420,.T.);+#2420=LINE('',#1210,#482);+#2421=ORIENTED_EDGE('',*,*,#2409,.F.);+#2422=ORIENTED_EDGE('',*,*,#1215,.F.);+#2423=PLANE('',#2424);+#2424=AXIS2_PLACEMENT_3D('',#1210,#13,#471);+#2425=ADVANCED_FACE('',(#2426),#2433,.T.);+#2426=FACE_BOUND('',#2427,.F.);+#2427=EDGE_LOOP('',(#2428,#1275,#2431,#2432));+#2428=ORIENTED_EDGE('',*,*,#2429,.T.);+#2429=EDGE_CURVE('',#1204,#1272,#2430,.T.);+#2430=LINE('',#1205,#482);+#2431=ORIENTED_EDGE('',*,*,#2419,.F.);+#2432=ORIENTED_EDGE('',*,*,#1208,.F.);+#2433=CYLINDRICAL_SURFACE('',#2434,0.2);+#2434=AXIS2_PLACEMENT_3D('',#1213,#1125,#1066);+#2435=ADVANCED_FACE('',(#2436),#2441,.F.);+#2436=FACE_BOUND('',#2437,.F.);+#2437=EDGE_LOOP('',(#2438,#1270,#2439,#2440));+#2438=ORIENTED_EDGE('',*,*,#1262,.T.);+#2439=ORIENTED_EDGE('',*,*,#2429,.F.);+#2440=ORIENTED_EDGE('',*,*,#1203,.F.);+#2441=PLANE('',#2442);+#2442=AXIS2_PLACEMENT_3D('',#1198,#2364,#1057);+#2443=ADVANCED_FACE('',(#2444),#2451,.T.);+#2444=FACE_BOUND('',#2445,.F.);+#2445=EDGE_LOOP('',(#2446,#1449,#2449,#2450));+#2446=ORIENTED_EDGE('',*,*,#2447,.T.);+#2447=EDGE_CURVE('',#1378,#1446,#2448,.T.);+#2448=LINE('',#1379,#482);+#2449=ORIENTED_EDGE('',*,*,#2178,.F.);+#2450=ORIENTED_EDGE('',*,*,#1382,.F.);+#2451=CYLINDRICAL_SURFACE('',#2452,0.2);+#2452=AXIS2_PLACEMENT_3D('',#1342,#1125,#1102);+#2453=ADVANCED_FACE('',(#2454),#2461,.F.);+#2454=FACE_BOUND('',#2455,.F.);+#2455=EDGE_LOOP('',(#2456,#1444,#2459,#2460));+#2456=ORIENTED_EDGE('',*,*,#2457,.T.);+#2457=EDGE_CURVE('',#1372,#1440,#2458,.T.);+#2458=LINE('',#1373,#482);+#2459=ORIENTED_EDGE('',*,*,#2447,.F.);+#2460=ORIENTED_EDGE('',*,*,#1377,.F.);+#2461=PLANE('',#2462);+#2462=AXIS2_PLACEMENT_3D('',#1373,#2305,#1096);+#2463=ADVANCED_FACE('',(#2464),#2471,.F.);+#2464=FACE_BOUND('',#2465,.F.);+#2465=EDGE_LOOP('',(#2466,#1438,#2469,#2470));+#2466=ORIENTED_EDGE('',*,*,#2467,.T.);+#2467=EDGE_CURVE('',#1367,#1435,#2468,.T.);+#2468=LINE('',#1368,#482);+#2469=ORIENTED_EDGE('',*,*,#2457,.F.);+#2470=ORIENTED_EDGE('',*,*,#1371,.F.);+#2471=CYLINDRICAL_SURFACE('',#2472,1.E-01);+#2472=AXIS2_PLACEMENT_3D('',#1354,#1125,#1089);+#2473=ADVANCED_FACE('',(#2474),#2481,.F.);+#2474=FACE_BOUND('',#2475,.F.);+#2475=EDGE_LOOP('',(#2476,#1433,#2479,#2480));+#2476=ORIENTED_EDGE('',*,*,#2477,.T.);+#2477=EDGE_CURVE('',#1362,#1430,#2478,.T.);+#2478=LINE('',#1363,#482);+#2479=ORIENTED_EDGE('',*,*,#2467,.F.);+#2480=ORIENTED_EDGE('',*,*,#1366,.F.);+#2481=PLANE('',#2482);+#2482=AXIS2_PLACEMENT_3D('',#1363,#851,#422);+#2483=ADVANCED_FACE('',(#2484),#2491,.F.);+#2484=FACE_BOUND('',#2485,.F.);+#2485=EDGE_LOOP('',(#2486,#1428,#2489,#2490));+#2486=ORIENTED_EDGE('',*,*,#2487,.T.);+#2487=EDGE_CURVE('',#1357,#1425,#2488,.T.);+#2488=LINE('',#1358,#482);+#2489=ORIENTED_EDGE('',*,*,#2477,.F.);+#2490=ORIENTED_EDGE('',*,*,#1361,.F.);+#2491=PLANE('',#2492);+#2492=AXIS2_PLACEMENT_3D('',#1358,#422,#13);+#2493=ADVANCED_FACE('',(#2494),#2501,.F.);+#2494=FACE_BOUND('',#2495,.F.);+#2495=EDGE_LOOP('',(#2496,#1423,#2499,#2500));+#2496=ORIENTED_EDGE('',*,*,#2497,.T.);+#2497=EDGE_CURVE('',#1350,#1418,#2498,.T.);+#2498=LINE('',#1351,#482);+#2499=ORIENTED_EDGE('',*,*,#2487,.F.);+#2500=ORIENTED_EDGE('',*,*,#1356,.F.);+#2501=PLANE('',#2502);+#2502=AXIS2_PLACEMENT_3D('',#1351,#13,#471);+#2503=ADVANCED_FACE('',(#2504),#2511,.T.);+#2504=FACE_BOUND('',#2505,.F.);+#2505=EDGE_LOOP('',(#2506,#1416,#2509,#2510));+#2506=ORIENTED_EDGE('',*,*,#2507,.T.);+#2507=EDGE_CURVE('',#1345,#1413,#2508,.T.);+#2508=LINE('',#1346,#482);+#2509=ORIENTED_EDGE('',*,*,#2497,.F.);+#2510=ORIENTED_EDGE('',*,*,#1349,.F.);+#2511=CYLINDRICAL_SURFACE('',#2512,0.2);+#2512=AXIS2_PLACEMENT_3D('',#1354,#1125,#1066);+#2513=ADVANCED_FACE('',(#2514),#2519,.F.);+#2514=FACE_BOUND('',#2515,.F.);+#2515=EDGE_LOOP('',(#2516,#1411,#2517,#2518));+#2516=ORIENTED_EDGE('',*,*,#1403,.T.);+#2517=ORIENTED_EDGE('',*,*,#2507,.F.);+#2518=ORIENTED_EDGE('',*,*,#1344,.F.);+#2519=PLANE('',#2520);+#2520=AXIS2_PLACEMENT_3D('',#1339,#2364,#1057);+#2521=ADVANCED_FACE('',(#2522),#2529,.F.);+#2522=FACE_BOUND('',#2523,.F.);+#2523=EDGE_LOOP('',(#2524,#1580,#2527,#2528));+#2524=ORIENTED_EDGE('',*,*,#2525,.T.);+#2525=EDGE_CURVE('',#1510,#1576,#2526,.T.);+#2526=LINE('',#1511,#482);+#2527=ORIENTED_EDGE('',*,*,#2143,.F.);+#2528=ORIENTED_EDGE('',*,*,#1515,.F.);+#2529=PLANE('',#2530);+#2530=AXIS2_PLACEMENT_3D('',#1511,#2305,#1096);+#2531=ADVANCED_FACE('',(#2532),#2539,.F.);+#2532=FACE_BOUND('',#2533,.F.);+#2533=EDGE_LOOP('',(#2534,#1574,#2537,#2538));+#2534=ORIENTED_EDGE('',*,*,#2535,.T.);+#2535=EDGE_CURVE('',#1505,#1571,#2536,.T.);+#2536=LINE('',#1506,#482);+#2537=ORIENTED_EDGE('',*,*,#2525,.F.);+#2538=ORIENTED_EDGE('',*,*,#1509,.F.);+#2539=CYLINDRICAL_SURFACE('',#2540,1.E-01);+#2540=AXIS2_PLACEMENT_3D('',#1492,#1125,#1089);+#2541=ADVANCED_FACE('',(#2542),#2549,.F.);+#2542=FACE_BOUND('',#2543,.F.);+#2543=EDGE_LOOP('',(#2544,#1569,#2547,#2548));+#2544=ORIENTED_EDGE('',*,*,#2545,.T.);+#2545=EDGE_CURVE('',#1500,#1566,#2546,.T.);+#2546=LINE('',#1501,#482);+#2547=ORIENTED_EDGE('',*,*,#2535,.F.);+#2548=ORIENTED_EDGE('',*,*,#1504,.F.);+#2549=PLANE('',#2550);+#2550=AXIS2_PLACEMENT_3D('',#1501,#851,#422);+#2551=ADVANCED_FACE('',(#2552),#2559,.F.);+#2552=FACE_BOUND('',#2553,.F.);+#2553=EDGE_LOOP('',(#2554,#1564,#2557,#2558));+#2554=ORIENTED_EDGE('',*,*,#2555,.T.);+#2555=EDGE_CURVE('',#1495,#1561,#2556,.T.);+#2556=LINE('',#1496,#482);+#2557=ORIENTED_EDGE('',*,*,#2545,.F.);+#2558=ORIENTED_EDGE('',*,*,#1499,.F.);+#2559=PLANE('',#2560);+#2560=AXIS2_PLACEMENT_3D('',#1496,#422,#13);+#2561=ADVANCED_FACE('',(#2562),#2569,.F.);+#2562=FACE_BOUND('',#2563,.F.);+#2563=EDGE_LOOP('',(#2564,#1559,#2567,#2568));+#2564=ORIENTED_EDGE('',*,*,#2565,.T.);+#2565=EDGE_CURVE('',#1488,#1554,#2566,.T.);+#2566=LINE('',#1489,#482);+#2567=ORIENTED_EDGE('',*,*,#2555,.F.);+#2568=ORIENTED_EDGE('',*,*,#1494,.F.);+#2569=PLANE('',#2570);+#2570=AXIS2_PLACEMENT_3D('',#1489,#13,#471);+#2571=ADVANCED_FACE('',(#2572),#2579,.T.);+#2572=FACE_BOUND('',#2573,.F.);+#2573=EDGE_LOOP('',(#2574,#1552,#2577,#2578));+#2574=ORIENTED_EDGE('',*,*,#2575,.T.);+#2575=EDGE_CURVE('',#1483,#1549,#2576,.T.);+#2576=LINE('',#1484,#482);+#2577=ORIENTED_EDGE('',*,*,#2565,.F.);+#2578=ORIENTED_EDGE('',*,*,#1487,.F.);+#2579=CYLINDRICAL_SURFACE('',#2580,0.2);+#2580=AXIS2_PLACEMENT_3D('',#1492,#1125,#1066);+#2581=ADVANCED_FACE('',(#2582),#2587,.F.);+#2582=FACE_BOUND('',#2583,.F.);+#2583=EDGE_LOOP('',(#2584,#1547,#2585,#2586));+#2584=ORIENTED_EDGE('',*,*,#1539,.T.);+#2585=ORIENTED_EDGE('',*,*,#2575,.F.);+#2586=ORIENTED_EDGE('',*,*,#1482,.F.);+#2587=PLANE('',#2588);+#2588=AXIS2_PLACEMENT_3D('',#1477,#2364,#1057);+#2589=ADVANCED_FACE('',(#2590),#2597,.F.);+#2590=FACE_BOUND('',#2591,.F.);+#2591=EDGE_LOOP('',(#2592,#1710,#2595,#2596));+#2592=ORIENTED_EDGE('',*,*,#2593,.T.);+#2593=EDGE_CURVE('',#1637,#1706,#2594,.T.);+#2594=LINE('',#1638,#87);+#2595=ORIENTED_EDGE('',*,*,#2272,.F.);+#2596=ORIENTED_EDGE('',*,*,#1643,.F.);+#2597=PLANE('',#2598);+#2598=AXIS2_PLACEMENT_3D('',#1638,#2599,#1648);+#2599=DIRECTION('',(-0.987285005229,-1.096106544673E-16,-0.158960115908));+#2600=ADVANCED_FACE('',(#2601),#2608,.F.);+#2601=FACE_BOUND('',#2602,.F.);+#2602=EDGE_LOOP('',(#2603,#1704,#2606,#2607));+#2603=ORIENTED_EDGE('',*,*,#2604,.T.);+#2604=EDGE_CURVE('',#1632,#1701,#2605,.T.);+#2605=LINE('',#1633,#87);+#2606=ORIENTED_EDGE('',*,*,#2593,.F.);+#2607=ORIENTED_EDGE('',*,*,#1636,.F.);+#2608=CYLINDRICAL_SURFACE('',#1640,1.E-01);+#2609=ADVANCED_FACE('',(#2610),#2617,.F.);+#2610=FACE_BOUND('',#2611,.F.);+#2611=EDGE_LOOP('',(#2612,#1699,#2615,#2616));+#2612=ORIENTED_EDGE('',*,*,#2613,.T.);+#2613=EDGE_CURVE('',#1627,#1696,#2614,.T.);+#2614=LINE('',#1628,#87);+#2615=ORIENTED_EDGE('',*,*,#2604,.F.);+#2616=ORIENTED_EDGE('',*,*,#1631,.F.);+#2617=PLANE('',#2618);+#2618=AXIS2_PLACEMENT_3D('',#1628,#851,#74);+#2619=ADVANCED_FACE('',(#2620),#2627,.F.);+#2620=FACE_BOUND('',#2621,.F.);+#2621=EDGE_LOOP('',(#2622,#1694,#2625,#2626));+#2622=ORIENTED_EDGE('',*,*,#2623,.T.);+#2623=EDGE_CURVE('',#1622,#1691,#2624,.T.);+#2624=LINE('',#1623,#87);+#2625=ORIENTED_EDGE('',*,*,#2613,.F.);+#2626=ORIENTED_EDGE('',*,*,#1626,.F.);+#2627=PLANE('',#2628);+#2628=AXIS2_PLACEMENT_3D('',#1623,#74,#13);+#2629=ADVANCED_FACE('',(#2630),#2637,.F.);+#2630=FACE_BOUND('',#2631,.F.);+#2631=EDGE_LOOP('',(#2632,#1689,#2635,#2636));+#2632=ORIENTED_EDGE('',*,*,#2633,.T.);+#2633=EDGE_CURVE('',#1614,#1684,#2634,.T.);+#2634=LINE('',#1615,#87);+#2635=ORIENTED_EDGE('',*,*,#2623,.F.);+#2636=ORIENTED_EDGE('',*,*,#1621,.F.);+#2637=PLANE('',#2638);+#2638=AXIS2_PLACEMENT_3D('',#1615,#13,#28);+#2639=ADVANCED_FACE('',(#2640),#2647,.T.);+#2640=FACE_BOUND('',#2641,.F.);+#2641=EDGE_LOOP('',(#2642,#1682,#2645,#2646));+#2642=ORIENTED_EDGE('',*,*,#2643,.T.);+#2643=EDGE_CURVE('',#1607,#1679,#2644,.T.);+#2644=LINE('',#1608,#87);+#2645=ORIENTED_EDGE('',*,*,#2633,.F.);+#2646=ORIENTED_EDGE('',*,*,#1613,.F.);+#2647=CYLINDRICAL_SURFACE('',#2648,0.2);+#2648=AXIS2_PLACEMENT_3D('',#1618,#60,#1619);+#2649=ADVANCED_FACE('',(#2650),#2655,.F.);+#2650=FACE_BOUND('',#2651,.F.);+#2651=EDGE_LOOP('',(#2652,#1677,#2653,#2654));+#2652=ORIENTED_EDGE('',*,*,#1670,.T.);+#2653=ORIENTED_EDGE('',*,*,#2643,.F.);+#2654=ORIENTED_EDGE('',*,*,#1606,.F.);+#2655=PLANE('',#2656);+#2656=AXIS2_PLACEMENT_3D('',#1600,#2657,#1611);+#2657=DIRECTION('',(0.987285005229,1.096106544673E-16,0.158960115908));+#2658=ADVANCED_FACE('',(#2659),#2666,.T.);+#2659=FACE_BOUND('',#2660,.F.);+#2660=EDGE_LOOP('',(#2661,#1849,#2664,#2665));+#2661=ORIENTED_EDGE('',*,*,#2662,.T.);+#2662=EDGE_CURVE('',#1779,#1846,#2663,.T.);+#2663=LINE('',#1780,#87);+#2664=ORIENTED_EDGE('',*,*,#2228,.F.);+#2665=ORIENTED_EDGE('',*,*,#1783,.F.);+#2666=CYLINDRICAL_SURFACE('',#2667,0.2);+#2667=AXIS2_PLACEMENT_3D('',#1743,#60,#1653);+#2668=ADVANCED_FACE('',(#2669),#2676,.F.);+#2669=FACE_BOUND('',#2670,.F.);+#2670=EDGE_LOOP('',(#2671,#1844,#2674,#2675));+#2671=ORIENTED_EDGE('',*,*,#2672,.T.);+#2672=EDGE_CURVE('',#1773,#1840,#2673,.T.);+#2673=LINE('',#1774,#87);+#2674=ORIENTED_EDGE('',*,*,#2662,.F.);+#2675=ORIENTED_EDGE('',*,*,#1778,.F.);+#2676=PLANE('',#2677);+#2677=AXIS2_PLACEMENT_3D('',#1774,#2599,#1648);+#2678=ADVANCED_FACE('',(#2679),#2686,.F.);+#2679=FACE_BOUND('',#2680,.F.);+#2680=EDGE_LOOP('',(#2681,#1838,#2684,#2685));+#2681=ORIENTED_EDGE('',*,*,#2682,.T.);+#2682=EDGE_CURVE('',#1768,#1835,#2683,.T.);+#2683=LINE('',#1769,#87);+#2684=ORIENTED_EDGE('',*,*,#2672,.F.);+#2685=ORIENTED_EDGE('',*,*,#1772,.F.);+#2686=CYLINDRICAL_SURFACE('',#1776,1.E-01);+#2687=ADVANCED_FACE('',(#2688),#2695,.F.);+#2688=FACE_BOUND('',#2689,.F.);+#2689=EDGE_LOOP('',(#2690,#1833,#2693,#2694));+#2690=ORIENTED_EDGE('',*,*,#2691,.T.);+#2691=EDGE_CURVE('',#1763,#1830,#2692,.T.);+#2692=LINE('',#1764,#87);+#2693=ORIENTED_EDGE('',*,*,#2682,.F.);+#2694=ORIENTED_EDGE('',*,*,#1767,.F.);+#2695=PLANE('',#2696);+#2696=AXIS2_PLACEMENT_3D('',#1764,#851,#74);+#2697=ADVANCED_FACE('',(#2698),#2705,.F.);+#2698=FACE_BOUND('',#2699,.F.);+#2699=EDGE_LOOP('',(#2700,#1828,#2703,#2704));+#2700=ORIENTED_EDGE('',*,*,#2701,.T.);+#2701=EDGE_CURVE('',#1758,#1825,#2702,.T.);+#2702=LINE('',#1759,#87);+#2703=ORIENTED_EDGE('',*,*,#2691,.F.);+#2704=ORIENTED_EDGE('',*,*,#1762,.F.);+#2705=PLANE('',#2706);+#2706=AXIS2_PLACEMENT_3D('',#1759,#74,#13);+#2707=ADVANCED_FACE('',(#2708),#2715,.F.);+#2708=FACE_BOUND('',#2709,.F.);+#2709=EDGE_LOOP('',(#2710,#1823,#2713,#2714));+#2710=ORIENTED_EDGE('',*,*,#2711,.T.);+#2711=EDGE_CURVE('',#1751,#1818,#2712,.T.);+#2712=LINE('',#1752,#87);+#2713=ORIENTED_EDGE('',*,*,#2701,.F.);+#2714=ORIENTED_EDGE('',*,*,#1757,.F.);+#2715=PLANE('',#2716);+#2716=AXIS2_PLACEMENT_3D('',#1752,#13,#28);+#2717=ADVANCED_FACE('',(#2718),#2725,.T.);+#2718=FACE_BOUND('',#2719,.F.);+#2719=EDGE_LOOP('',(#2720,#1816,#2723,#2724));+#2720=ORIENTED_EDGE('',*,*,#2721,.T.);+#2721=EDGE_CURVE('',#1746,#1813,#2722,.T.);+#2722=LINE('',#1747,#87);+#2723=ORIENTED_EDGE('',*,*,#2711,.F.);+#2724=ORIENTED_EDGE('',*,*,#1750,.F.);+#2725=CYLINDRICAL_SURFACE('',#2726,0.2);+#2726=AXIS2_PLACEMENT_3D('',#1755,#60,#1619);+#2727=ADVANCED_FACE('',(#2728),#2733,.F.);+#2728=FACE_BOUND('',#2729,.F.);+#2729=EDGE_LOOP('',(#2730,#1811,#2731,#2732));+#2730=ORIENTED_EDGE('',*,*,#1804,.T.);+#2731=ORIENTED_EDGE('',*,*,#2721,.F.);+#2732=ORIENTED_EDGE('',*,*,#1745,.F.);+#2733=PLANE('',#2734);+#2734=AXIS2_PLACEMENT_3D('',#1740,#2657,#1611);+#2735=ADVANCED_FACE('',(#2736),#2743,.T.);+#2736=FACE_BOUND('',#2737,.F.);+#2737=EDGE_LOOP('',(#2738,#1989,#2741,#2742));+#2738=ORIENTED_EDGE('',*,*,#2739,.T.);+#2739=EDGE_CURVE('',#1919,#1986,#2740,.T.);+#2740=LINE('',#1920,#87);+#2741=ORIENTED_EDGE('',*,*,#2240,.F.);+#2742=ORIENTED_EDGE('',*,*,#1923,.F.);+#2743=CYLINDRICAL_SURFACE('',#2744,0.2);+#2744=AXIS2_PLACEMENT_3D('',#1883,#60,#1653);+#2745=ADVANCED_FACE('',(#2746),#2753,.F.);+#2746=FACE_BOUND('',#2747,.F.);+#2747=EDGE_LOOP('',(#2748,#1984,#2751,#2752));+#2748=ORIENTED_EDGE('',*,*,#2749,.T.);+#2749=EDGE_CURVE('',#1913,#1980,#2750,.T.);+#2750=LINE('',#1914,#87);+#2751=ORIENTED_EDGE('',*,*,#2739,.F.);+#2752=ORIENTED_EDGE('',*,*,#1918,.F.);+#2753=PLANE('',#2754);+#2754=AXIS2_PLACEMENT_3D('',#1914,#2599,#1648);+#2755=ADVANCED_FACE('',(#2756),#2763,.F.);+#2756=FACE_BOUND('',#2757,.F.);+#2757=EDGE_LOOP('',(#2758,#1978,#2761,#2762));+#2758=ORIENTED_EDGE('',*,*,#2759,.T.);+#2759=EDGE_CURVE('',#1908,#1975,#2760,.T.);+#2760=LINE('',#1909,#87);+#2761=ORIENTED_EDGE('',*,*,#2749,.F.);+#2762=ORIENTED_EDGE('',*,*,#1912,.F.);+#2763=CYLINDRICAL_SURFACE('',#1916,1.E-01);+#2764=ADVANCED_FACE('',(#2765),#2772,.F.);+#2765=FACE_BOUND('',#2766,.F.);+#2766=EDGE_LOOP('',(#2767,#1973,#2770,#2771));+#2767=ORIENTED_EDGE('',*,*,#2768,.T.);+#2768=EDGE_CURVE('',#1903,#1970,#2769,.T.);+#2769=LINE('',#1904,#87);+#2770=ORIENTED_EDGE('',*,*,#2759,.F.);+#2771=ORIENTED_EDGE('',*,*,#1907,.F.);+#2772=PLANE('',#2773);+#2773=AXIS2_PLACEMENT_3D('',#1904,#851,#74);+#2774=ADVANCED_FACE('',(#2775),#2782,.F.);+#2775=FACE_BOUND('',#2776,.F.);+#2776=EDGE_LOOP('',(#2777,#1968,#2780,#2781));+#2777=ORIENTED_EDGE('',*,*,#2778,.T.);+#2778=EDGE_CURVE('',#1898,#1965,#2779,.T.);+#2779=LINE('',#1899,#87);+#2780=ORIENTED_EDGE('',*,*,#2768,.F.);+#2781=ORIENTED_EDGE('',*,*,#1902,.F.);+#2782=PLANE('',#2783);+#2783=AXIS2_PLACEMENT_3D('',#1899,#74,#13);+#2784=ADVANCED_FACE('',(#2785),#2792,.F.);+#2785=FACE_BOUND('',#2786,.F.);+#2786=EDGE_LOOP('',(#2787,#1963,#2790,#2791));+#2787=ORIENTED_EDGE('',*,*,#2788,.T.);+#2788=EDGE_CURVE('',#1891,#1958,#2789,.T.);+#2789=LINE('',#1892,#87);+#2790=ORIENTED_EDGE('',*,*,#2778,.F.);+#2791=ORIENTED_EDGE('',*,*,#1897,.F.);+#2792=PLANE('',#2793);+#2793=AXIS2_PLACEMENT_3D('',#1892,#13,#28);+#2794=ADVANCED_FACE('',(#2795),#2802,.T.);+#2795=FACE_BOUND('',#2796,.F.);+#2796=EDGE_LOOP('',(#2797,#1956,#2800,#2801));+#2797=ORIENTED_EDGE('',*,*,#2798,.T.);+#2798=EDGE_CURVE('',#1886,#1953,#2799,.T.);+#2799=LINE('',#1887,#87);+#2800=ORIENTED_EDGE('',*,*,#2788,.F.);+#2801=ORIENTED_EDGE('',*,*,#1890,.F.);+#2802=CYLINDRICAL_SURFACE('',#2803,0.2);+#2803=AXIS2_PLACEMENT_3D('',#1895,#60,#1619);+#2804=ADVANCED_FACE('',(#2805),#2810,.F.);+#2805=FACE_BOUND('',#2806,.F.);+#2806=EDGE_LOOP('',(#2807,#1951,#2808,#2809));+#2807=ORIENTED_EDGE('',*,*,#1944,.T.);+#2808=ORIENTED_EDGE('',*,*,#2798,.F.);+#2809=ORIENTED_EDGE('',*,*,#1885,.F.);+#2810=PLANE('',#2811);+#2811=AXIS2_PLACEMENT_3D('',#1880,#2657,#1611);+#2812=ADVANCED_FACE('',(#2813),#2820,.T.);+#2813=FACE_BOUND('',#2814,.F.);+#2814=EDGE_LOOP('',(#2815,#2129,#2818,#2819));+#2815=ORIENTED_EDGE('',*,*,#2816,.T.);+#2816=EDGE_CURVE('',#2059,#2126,#2817,.T.);+#2817=LINE('',#2060,#87);+#2818=ORIENTED_EDGE('',*,*,#2252,.F.);+#2819=ORIENTED_EDGE('',*,*,#2063,.F.);+#2820=CYLINDRICAL_SURFACE('',#2821,0.2);+#2821=AXIS2_PLACEMENT_3D('',#2023,#60,#1653);+#2822=ADVANCED_FACE('',(#2823),#2830,.F.);+#2823=FACE_BOUND('',#2824,.F.);+#2824=EDGE_LOOP('',(#2825,#2124,#2828,#2829));+#2825=ORIENTED_EDGE('',*,*,#2826,.T.);+#2826=EDGE_CURVE('',#2053,#2120,#2827,.T.);+#2827=LINE('',#2054,#87);+#2828=ORIENTED_EDGE('',*,*,#2816,.F.);+#2829=ORIENTED_EDGE('',*,*,#2058,.F.);+#2830=PLANE('',#2831);+#2831=AXIS2_PLACEMENT_3D('',#2054,#2599,#1648);+#2832=ADVANCED_FACE('',(#2833),#2840,.F.);+#2833=FACE_BOUND('',#2834,.F.);+#2834=EDGE_LOOP('',(#2835,#2118,#2838,#2839));+#2835=ORIENTED_EDGE('',*,*,#2836,.T.);+#2836=EDGE_CURVE('',#2048,#2115,#2837,.T.);+#2837=LINE('',#2049,#87);+#2838=ORIENTED_EDGE('',*,*,#2826,.F.);+#2839=ORIENTED_EDGE('',*,*,#2052,.F.);+#2840=CYLINDRICAL_SURFACE('',#2056,1.E-01);+#2841=ADVANCED_FACE('',(#2842),#2849,.F.);+#2842=FACE_BOUND('',#2843,.F.);+#2843=EDGE_LOOP('',(#2844,#2113,#2847,#2848));+#2844=ORIENTED_EDGE('',*,*,#2845,.T.);+#2845=EDGE_CURVE('',#2043,#2110,#2846,.T.);+#2846=LINE('',#2044,#87);+#2847=ORIENTED_EDGE('',*,*,#2836,.F.);+#2848=ORIENTED_EDGE('',*,*,#2047,.F.);+#2849=PLANE('',#2850);+#2850=AXIS2_PLACEMENT_3D('',#2044,#851,#74);+#2851=ADVANCED_FACE('',(#2852),#2859,.F.);+#2852=FACE_BOUND('',#2853,.F.);+#2853=EDGE_LOOP('',(#2854,#2108,#2857,#2858));+#2854=ORIENTED_EDGE('',*,*,#2855,.T.);+#2855=EDGE_CURVE('',#2038,#2105,#2856,.T.);+#2856=LINE('',#2039,#87);+#2857=ORIENTED_EDGE('',*,*,#2845,.F.);+#2858=ORIENTED_EDGE('',*,*,#2042,.F.);+#2859=PLANE('',#2860);+#2860=AXIS2_PLACEMENT_3D('',#2039,#74,#13);+#2861=ADVANCED_FACE('',(#2862),#2869,.F.);+#2862=FACE_BOUND('',#2863,.F.);+#2863=EDGE_LOOP('',(#2864,#2103,#2867,#2868));+#2864=ORIENTED_EDGE('',*,*,#2865,.T.);+#2865=EDGE_CURVE('',#2031,#2098,#2866,.T.);+#2866=LINE('',#2032,#87);+#2867=ORIENTED_EDGE('',*,*,#2855,.F.);+#2868=ORIENTED_EDGE('',*,*,#2037,.F.);+#2869=PLANE('',#2870);+#2870=AXIS2_PLACEMENT_3D('',#2032,#13,#28);+#2871=ADVANCED_FACE('',(#2872),#2879,.T.);+#2872=FACE_BOUND('',#2873,.F.);+#2873=EDGE_LOOP('',(#2874,#2096,#2877,#2878));+#2874=ORIENTED_EDGE('',*,*,#2875,.T.);+#2875=EDGE_CURVE('',#2026,#2093,#2876,.T.);+#2876=LINE('',#2027,#87);+#2877=ORIENTED_EDGE('',*,*,#2865,.F.);+#2878=ORIENTED_EDGE('',*,*,#2030,.F.);+#2879=CYLINDRICAL_SURFACE('',#2880,0.2);+#2880=AXIS2_PLACEMENT_3D('',#2035,#60,#1619);+#2881=ADVANCED_FACE('',(#2882),#2887,.F.);+#2882=FACE_BOUND('',#2883,.F.);+#2883=EDGE_LOOP('',(#2884,#2091,#2885,#2886));+#2884=ORIENTED_EDGE('',*,*,#2084,.T.);+#2885=ORIENTED_EDGE('',*,*,#2875,.F.);+#2886=ORIENTED_EDGE('',*,*,#2025,.F.);+#2887=PLANE('',#2888);+#2888=AXIS2_PLACEMENT_3D('',#2020,#2657,#1611);+#2889=ADVANCED_FACE('',(#2890),#2893,.F.);+#2890=FACE_BOUND('',#2891,.T.);+#2891=EDGE_LOOP('',(#2892));+#2892=ORIENTED_EDGE('',*,*,#2204,.F.);+#2893=PLANE('',#2894);+#2894=AXIS2_PLACEMENT_3D('',#2209,#851,#88);+#2895=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2899)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#2896,#2897,#2898)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#2896=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#2897=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#2898=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#2899=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2896,'distance_accuracy_value','confusion accuracy');+#2900=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#2901=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#2902,#2912,#2913,#2914,#2915,#2916,#2917,#2918,#2919,#2920,#2921,#2930,#2931,#2932,#2933,#2934,#2935,#2936,#2937,#2938,#2939,#2940,#2941,#2942,#2943,#2944,#2945,#2946,#2947,#2948,#2949,#2950,#2951,#2952,#2953,#2954,#2955,#2956,#2957,#2958,#2959,#2960,#2961,#2962,#2963,#2964,#2965,#2966,#2967,#2968,#2969,#2970,#2971,#2972,#2973,#2974,#2975,#2976,#2977,#2978,#2979,#2980,#2981,#2982,#2983,#2984,#2985,#2986,#2987,#2988,#2989,#2990,#2991,#2992,#2993,#2994,#2995,#2996,#2997,#2998,#2999,#3000,#3001,#3002,#3003,#3004,#3005,#3006,#3007,#3008,#3009,#3010,#3011,#3012,#3013,#3014,#3015,#3016,#3017,#3018,#3019,#3020,#3021,#3022,#3023,#3024,#3025,#3026,#3027,#3028,#3029,#3030,#3031,#3032,#3033,#3034,#3035,#3036,#3037,#3038,#3039,#3040,#3041,#3042,#3043,#3044,#3045,#3046,#3047,#3048,#3049,#3050,#3051,#3052,#3053,#3054,#3055,#3056,#3057,#3058,#3059,#3060,#3061,#3062,#3063,#3064,#3065,#3066,#3067,#3068,#3069,#3070),#2895);+#2902=STYLED_ITEM('color',(#2903),#17);+#2903=PRESENTATION_STYLE_ASSIGNMENT((#2904,#2910));+#2904=SURFACE_STYLE_USAGE(.BOTH.,#2905);+#2905=SURFACE_SIDE_STYLE('',(#2906));+#2906=SURFACE_STYLE_FILL_AREA(#2907);+#2907=FILL_AREA_STYLE('',(#2908));+#2908=FILL_AREA_STYLE_COLOUR('',#2909);+#2909=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#2910=CURVE_STYLE('',#2911,POSITIVE_LENGTH_MEASURE(0.1),#2909);+#2911=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#2912=STYLED_ITEM('color',(#2903),#43);+#2913=STYLED_ITEM('color',(#2903),#119);+#2914=STYLED_ITEM('color',(#2903),#133);+#2915=STYLED_ITEM('color',(#2903),#152);+#2916=STYLED_ITEM('color',(#2903),#166);+#2917=STYLED_ITEM('color',(#2903),#212);+#2918=STYLED_ITEM('color',(#2903),#258);+#2919=STYLED_ITEM('color',(#2903),#272);+#2920=STYLED_ITEM('color',(#2903),#286);+#2921=STYLED_ITEM('color',(#2922),#296);+#2922=PRESENTATION_STYLE_ASSIGNMENT((#2923,#2929));+#2923=SURFACE_STYLE_USAGE(.BOTH.,#2924);+#2924=SURFACE_SIDE_STYLE('',(#2925));+#2925=SURFACE_STYLE_FILL_AREA(#2926);+#2926=FILL_AREA_STYLE('',(#2927));+#2927=FILL_AREA_STYLE_COLOUR('',#2928);+#2928=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#2929=CURVE_STYLE('',#2911,POSITIVE_LENGTH_MEASURE(0.1),#2928);+#2930=STYLED_ITEM('color',(#2922),#316);+#2931=STYLED_ITEM('color',(#2922),#331);+#2932=STYLED_ITEM('color',(#2922),#344);+#2933=STYLED_ITEM('color',(#2903),#353);+#2934=STYLED_ITEM('color',(#2903),#368);+#2935=STYLED_ITEM('color',(#2903),#432);+#2936=STYLED_ITEM('color',(#2903),#443);+#2937=STYLED_ITEM('color',(#2922),#461);+#2938=STYLED_ITEM('color',(#2903),#486);+#2939=STYLED_ITEM('color',(#2922),#504);+#2940=STYLED_ITEM('color',(#2903),#525);+#2941=STYLED_ITEM('color',(#2922),#543);+#2942=STYLED_ITEM('color',(#2903),#564);+#2943=STYLED_ITEM('color',(#2922),#582);+#2944=STYLED_ITEM('color',(#2903),#603);+#2945=STYLED_ITEM('color',(#2903),#613);+#2946=STYLED_ITEM('color',(#2922),#625);+#2947=STYLED_ITEM('color',(#2903),#646);+#2948=STYLED_ITEM('color',(#2922),#664);+#2949=STYLED_ITEM('color',(#2903),#685);+#2950=STYLED_ITEM('color',(#2922),#703);+#2951=STYLED_ITEM('color',(#2903),#724);+#2952=STYLED_ITEM('color',(#2922),#742);+#2953=STYLED_ITEM('color',(#2903),#763);+#2954=STYLED_ITEM('color',(#2903),#780);+#2955=STYLED_ITEM('color',(#2903),#795);+#2956=STYLED_ITEM('color',(#2903),#810);+#2957=STYLED_ITEM('color',(#2922),#821);+#2958=STYLED_ITEM('color',(#2922),#828);+#2959=STYLED_ITEM('color',(#2903),#852);+#2960=STYLED_ITEM('color',(#2903),#898);+#2961=STYLED_ITEM('color',(#2903),#912);+#2962=STYLED_ITEM('color',(#2903),#926);+#2963=STYLED_ITEM('color',(#2903),#940);+#2964=STYLED_ITEM('color',(#2922),#986);+#2965=STYLED_ITEM('color',(#2903),#1006);+#2966=STYLED_ITEM('color',(#2922),#1037);+#2967=STYLED_ITEM('color',(#2922),#1108);+#2968=STYLED_ITEM('color',(#2922),#1126);+#2969=STYLED_ITEM('color',(#2903),#1179);+#2970=STYLED_ITEM('color',(#2922),#1190);+#2971=STYLED_ITEM('color',(#2922),#1250);+#2972=STYLED_ITEM('color',(#2922),#1267);+#2973=STYLED_ITEM('color',(#2903),#1320);+#2974=STYLED_ITEM('color',(#2922),#1331);+#2975=STYLED_ITEM('color',(#2922),#1391);+#2976=STYLED_ITEM('color',(#2922),#1408);+#2977=STYLED_ITEM('color',(#2903),#1461);+#2978=STYLED_ITEM('color',(#2922),#1469);+#2979=STYLED_ITEM('color',(#2922),#1527);+#2980=STYLED_ITEM('color',(#2922),#1544);+#2981=STYLED_ITEM('color',(#2922),#1592);+#2982=STYLED_ITEM('color',(#2922),#1658);+#2983=STYLED_ITEM('color',(#2922),#1674);+#2984=STYLED_ITEM('color',(#2903),#1722);+#2985=STYLED_ITEM('color',(#2922),#1732);+#2986=STYLED_ITEM('color',(#2922),#1792);+#2987=STYLED_ITEM('color',(#2922),#1808);+#2988=STYLED_ITEM('color',(#2903),#1861);+#2989=STYLED_ITEM('color',(#2922),#1872);+#2990=STYLED_ITEM('color',(#2922),#1932);+#2991=STYLED_ITEM('color',(#2922),#1948);+#2992=STYLED_ITEM('color',(#2903),#2001);+#2993=STYLED_ITEM('color',(#2922),#2012);+#2994=STYLED_ITEM('color',(#2922),#2072);+#2995=STYLED_ITEM('color',(#2922),#2088);+#2996=STYLED_ITEM('color',(#2922),#2139);+#2997=STYLED_ITEM('color',(#2922),#2149);+#2998=STYLED_ITEM('color',(#2922),#2161);+#2999=STYLED_ITEM('color',(#2922),#2173);+#3000=STYLED_ITEM('color',(#2903),#2185);+#3001=STYLED_ITEM('color',(#2903),#2214);+#3002=STYLED_ITEM('color',(#2922),#2223);+#3003=STYLED_ITEM('color',(#2922),#2235);+#3004=STYLED_ITEM('color',(#2922),#2247);+#3005=STYLED_ITEM('color',(#2903),#2259);+#3006=STYLED_ITEM('color',(#2922),#2268);+#3007=STYLED_ITEM('color',(#2903),#2278);+#3008=STYLED_ITEM('color',(#2922),#2285);+#3009=STYLED_ITEM('color',(#2922),#2295);+#3010=STYLED_ITEM('color',(#2922),#2306);+#3011=STYLED_ITEM('color',(#2922),#2316);+#3012=STYLED_ITEM('color',(#2922),#2326);+#3013=STYLED_ITEM('color',(#2922),#2336);+#3014=STYLED_ITEM('color',(#2922),#2346);+#3015=STYLED_ITEM('color',(#2922),#2356);+#3016=STYLED_ITEM('color',(#2922),#2365);+#3017=STYLED_ITEM('color',(#2922),#2375);+#3018=STYLED_ITEM('color',(#2922),#2385);+#3019=STYLED_ITEM('color',(#2922),#2395);+#3020=STYLED_ITEM('color',(#2922),#2405);+#3021=STYLED_ITEM('color',(#2922),#2415);+#3022=STYLED_ITEM('color',(#2922),#2425);+#3023=STYLED_ITEM('color',(#2922),#2435);+#3024=STYLED_ITEM('color',(#2922),#2443);+#3025=STYLED_ITEM('color',(#2922),#2453);+#3026=STYLED_ITEM('color',(#2922),#2463);+#3027=STYLED_ITEM('color',(#2922),#2473);+#3028=STYLED_ITEM('color',(#2922),#2483);+#3029=STYLED_ITEM('color',(#2922),#2493);+#3030=STYLED_ITEM('color',(#2922),#2503);+#3031=STYLED_ITEM('color',(#2922),#2513);+#3032=STYLED_ITEM('color',(#2922),#2521);+#3033=STYLED_ITEM('color',(#2922),#2531);+#3034=STYLED_ITEM('color',(#2922),#2541);+#3035=STYLED_ITEM('color',(#2922),#2551);+#3036=STYLED_ITEM('color',(#2922),#2561);+#3037=STYLED_ITEM('color',(#2922),#2571);+#3038=STYLED_ITEM('color',(#2922),#2581);+#3039=STYLED_ITEM('color',(#2922),#2589);+#3040=STYLED_ITEM('color',(#2922),#2600);+#3041=STYLED_ITEM('color',(#2922),#2609);+#3042=STYLED_ITEM('color',(#2922),#2619);+#3043=STYLED_ITEM('color',(#2922),#2629);+#3044=STYLED_ITEM('color',(#2922),#2639);+#3045=STYLED_ITEM('color',(#2922),#2649);+#3046=STYLED_ITEM('color',(#2922),#2658);+#3047=STYLED_ITEM('color',(#2922),#2668);+#3048=STYLED_ITEM('color',(#2922),#2678);+#3049=STYLED_ITEM('color',(#2922),#2687);+#3050=STYLED_ITEM('color',(#2922),#2697);+#3051=STYLED_ITEM('color',(#2922),#2707);+#3052=STYLED_ITEM('color',(#2922),#2717);+#3053=STYLED_ITEM('color',(#2922),#2727);+#3054=STYLED_ITEM('color',(#2922),#2735);+#3055=STYLED_ITEM('color',(#2922),#2745);+#3056=STYLED_ITEM('color',(#2922),#2755);+#3057=STYLED_ITEM('color',(#2922),#2764);+#3058=STYLED_ITEM('color',(#2922),#2774);+#3059=STYLED_ITEM('color',(#2922),#2784);+#3060=STYLED_ITEM('color',(#2922),#2794);+#3061=STYLED_ITEM('color',(#2922),#2804);+#3062=STYLED_ITEM('color',(#2922),#2812);+#3063=STYLED_ITEM('color',(#2922),#2822);+#3064=STYLED_ITEM('color',(#2922),#2832);+#3065=STYLED_ITEM('color',(#2922),#2841);+#3066=STYLED_ITEM('color',(#2922),#2851);+#3067=STYLED_ITEM('color',(#2922),#2861);+#3068=STYLED_ITEM('color',(#2922),#2871);+#3069=STYLED_ITEM('color',(#2922),#2881);+#3070=STYLED_ITEM('color',(#3071),#2889);+#3071=PRESENTATION_STYLE_ASSIGNMENT((#3072,#3078));+#3072=SURFACE_STYLE_USAGE(.BOTH.,#3073);+#3073=SURFACE_SIDE_STYLE('',(#3074));+#3074=SURFACE_STYLE_FILL_AREA(#3075);+#3075=FILL_AREA_STYLE('',(#3076));+#3076=FILL_AREA_STYLE_COLOUR('',#3077);+#3077=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#3078=CURVE_STYLE('',#2911,POSITIVE_LENGTH_MEASURE(0.1),#3077);+ENDSEC;+END-ISO-10303-21;
docs/bd9329efj-e2-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+203@@ -0,0 +1,203 @@+{+ "slug": "bd9329efj-e2",+ "version": "0.1.0",+ "type": "component",+ "description": "ROHM Semicon DC-DC Converters, HTSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "bd9329efj-e2",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bd9329efj-e2.kicad_sym",+ "bd9329efj-e2.kicad_mod",+ "bd9329efj-e2.glb",+ "bd9329efj-e2.step",+ "bd9329efj-e2.lbr",+ "docs/hero.png",+ "docs/bd9329efj-e2-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "bd9329efj-e2-hero.glb",+ "bd9329efj-e2-hero.overlay.json",+ "bd9329efj-e2-etched.glb"+ ],+ "component": {+ "mpn": "BD9329EFJ-E2",+ "manufacturer": "ROHM Semicon",+ "package": "HTSOP-8-EP",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908988910354432",+ "parts": {+ "symbol": "bd9329efj-e2.kicad_sym",+ "footprint": "bd9329efj-e2.kicad_mod",+ "model_3d": "bd9329efj-e2-hero.glb",+ "model_3d_plain": "bd9329efj-e2-etched.glb",+ "model_3d_step": "bd9329efj-e2-etched.step",+ "model_3d_step_plain": "bd9329efj-e2.step",+ "lbr": "bd9329efj-e2.lbr"+ },+ "distributor_links": {+ "lcsc": "C161950",+ "digikey": "846-BD9329EFJ-E2TR-ND",+ "mouser": "755-BD9329EFJ-E2"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T04:40:33Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "846-BD9329EFJ-E2TR-ND",+ "status": "found",+ "lifecycle": "Not For New Designs"+ },+ "mouser": {+ "pn": "755-BD9329EFJ-E2",+ "status": "found",+ "lifecycle": "Not Recommended for New Designs"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "BST",+ "type": "input",+ "description": "High-side gate drive boost input, rated at VSW + 7 V maximum, and an R_BS resistor is used to protect against VIN-BST short destruction."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Power input with a 4.2 V to 18.0 V operating range (12 V typical) and a 20 V absolute maximum rating, with UVLO at 3.75 V typical on rising VIN."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Power switching output driving the inductor, with SW voltage of -0.5 V to 18 V in operation, 20 V absolute maximum, and a switch current limit of 3.5 A minimum."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference that must be kept at a minimum potential in all operating conditions, and the exposed thermal pad is to be shorted to it."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input regulated to 0.9 V typical (±1.5% at room temperature, ±2.0% from -25 °C to 85 °C), with an input bias current of 0.02 µA typical."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "passive",+ "description": "Compensation node of the error amplifier, whose voltage is limited by the SS pin voltage during startup."+ },+ {+ "number": "7",+ "name": "EN",+ "type": "input",+ "description": "Enable input with a 1.0 V to 1.4 V threshold (1.2 V typical) and a 20 V absolute maximum rating; leaving it open shuts the IC down."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "input",+ "description": "Soft-start control input where the soft-start time is TSS = 2.2 × CSS / ISS with ISS of 10 µA typical, giving 22 ms for CSS = 0.1 µF."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The requested MPN BD9329EFJ-E2 does not appear in the datasheet. The document covers BD9329AEFJ, and; The package is printed as HTSOP-J8 with an exposed thermal pad, not HTSOP-8-EP. The datasheet gives ; The datasheet gives no separate electrical limits for BST, COMP, or the exposed pad. The BST limit i",+ "exposed pad 9 added from the footprint"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0892,+ "at": "2026-10-19T04:38:14"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908988910354432",+ "pages": 18,+ "sha256": "85a15b87e8976378",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "bd9329efj-e2.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.3,+ 4.9,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5725ef8fdb2a59de31e3e536dac45cd9ef218380d71f34406b961c302e1ec9b9",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bd9329efj-e2-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.3,+ 4.9,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c687548ac0c416885079ac3a637269ac5493ec17babaf1657d6b5d123e70d753",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+209@@ -0,0 +1,209 @@+{+ "slug": "bd9329efj-e2",+ "version": "0.1.0",+ "type": "component",+ "description": "ROHM Semicon DC-DC Converters, HTSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "bd9329efj-e2",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bd9329efj-e2.kicad_sym",+ "bd9329efj-e2.kicad_mod",+ "bd9329efj-e2.glb",+ "bd9329efj-e2.step",+ "bd9329efj-e2.lbr",+ "docs/hero.png",+ "docs/bd9329efj-e2-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "bd9329efj-e2-hero.glb",+ "bd9329efj-e2-hero.overlay.json",+ "bd9329efj-e2-etched.glb"+ ],+ "component": {+ "mpn": "BD9329EFJ-E2",+ "manufacturer": "ROHM Semicon",+ "package": "HTSOP-8-EP",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908988910354432",+ "parts": {+ "symbol": "bd9329efj-e2.kicad_sym",+ "footprint": "bd9329efj-e2.kicad_mod",+ "model_3d": "bd9329efj-e2-hero.glb",+ "model_3d_plain": "bd9329efj-e2-etched.glb",+ "model_3d_step": "bd9329efj-e2-etched.step",+ "model_3d_step_plain": "bd9329efj-e2.step",+ "lbr": "bd9329efj-e2.lbr"+ },+ "distributor_links": {+ "lcsc": "C161950",+ "digikey": "846-BD9329EFJ-E2TR-ND",+ "mouser": "755-BD9329EFJ-E2"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T04:40:33Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "846-BD9329EFJ-E2TR-ND",+ "status": "found",+ "lifecycle": "Not For New Designs"+ },+ "mouser": {+ "pn": "755-BD9329EFJ-E2",+ "status": "found",+ "lifecycle": "Not Recommended for New Designs"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "BST",+ "type": "input",+ "description": "High-side gate drive boost input, rated at VSW + 7 V maximum, and an R_BS resistor is used to protect against VIN-BST short destruction."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Power input with a 4.2 V to 18.0 V operating range (12 V typical) and a 20 V absolute maximum rating, with UVLO at 3.75 V typical on rising VIN."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Power switching output driving the inductor, with SW voltage of -0.5 V to 18 V in operation, 20 V absolute maximum, and a switch current limit of 3.5 A minimum."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference that must be kept at a minimum potential in all operating conditions, and the exposed thermal pad is to be shorted to it."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input regulated to 0.9 V typical (±1.5% at room temperature, ±2.0% from -25 °C to 85 °C), with an input bias current of 0.02 µA typical."+ },+ {+ "number": "6",+ "name": "COMP",+ "type": "passive",+ "description": "Compensation node of the error amplifier, whose voltage is limited by the SS pin voltage during startup."+ },+ {+ "number": "7",+ "name": "EN",+ "type": "input",+ "description": "Enable input with a 1.0 V to 1.4 V threshold (1.2 V typical) and a 20 V absolute maximum rating; leaving it open shuts the IC down."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "input",+ "description": "Soft-start control input where the soft-start time is TSS = 2.2 × CSS / ISS with ISS of 10 µA typical, giving 22 ms for CSS = 0.1 µF."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The requested MPN BD9329EFJ-E2 does not appear in the datasheet. The document covers BD9329AEFJ, and; The package is printed as HTSOP-J8 with an exposed thermal pad, not HTSOP-8-EP. The datasheet gives ; The datasheet gives no separate electrical limits for BST, COMP, or the exposed pad. The BST limit i",+ "exposed pad 9 added from the footprint"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0892,+ "at": "2026-10-19T04:38:14"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908988910354432",+ "pages": 18,+ "sha256": "85a15b87e8976378",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "bd9329efj-e2.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.3,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5725ef8fdb2a59de31e3e536dac45cd9ef218380d71f34406b961c302e1ec9b9",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bd9329efj-e2-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.3,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c687548ac0c416885079ac3a637269ac5493ec17babaf1657d6b5d123e70d753",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bd9329efj-e2</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bd9329efj-e2</title>