component
BD63006MUV-E2
Public Made by Adomby adom
ROHM Semicon Brushless DC (BLDC) Motor Driver, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+24−21@@ -38,25 +38,25 @@ "number": "1", "name": "LPE", "type": "input",- "description": "Motor lock protection timing selector (1.1sec if H/M or disabled if L); pulled up to VREG through 100k\u03a9."+ "description": "Motor lock protection timing selector (1.1sec if H/M or disabled if L); pulled up to VREG through 100kΩ." }, { "number": "2", "name": "FGO", "type": "tri_state",- "description": "Open-drain Hall signal output (1FG or 3FG); inactive during stand-by; requires external 10k\u03a9 to 100k\u03a9 pull-up."+ "description": "Open-drain Hall signal output (1FG or 3FG); inactive during stand-by; requires external 10kΩ to 100kΩ pull-up." }, { "number": "3", "name": "CP1", "type": "passive",- "description": "Charge pump positive capacitor connection terminal; connect 0.1\u00b5F or greater capacitor between CP1 and CP2."+ "description": "Charge pump positive capacitor connection terminal; connect 0.1µF or greater capacitor between CP1 and CP2." }, { "number": "4", "name": "CP2", "type": "passive",- "description": "Charge pump negative capacitor connection terminal; connect 0.1\u00b5F or greater capacitor between CP1 and CP2."+ "description": "Charge pump negative capacitor connection terminal; connect 0.1µF or greater capacitor between CP1 and CP2." }, { "number": "5",@@ -80,67 +80,67 @@ "number": "8", "name": "U", "type": "tri_state",- "description": "U phase tri-state driver output with 1\u00b5s (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error."+ "description": "U phase tri-state driver output with 1µs (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error." }, { "number": "9", "name": "V", "type": "power_in",- "description": "V phase tri-state driver output with 1\u00b5s (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error."+ "description": "V phase tri-state driver output with 1µs (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error." }, { "number": "10", "name": "W", "type": "tri_state",- "description": "W phase tri-state driver output with 1\u00b5s (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error."+ "description": "W phase tri-state driver output with 1µs (Typ) dead time; outputs Hi-z during UVLO, OVLO, OCP, TSD, or Hall error." }, { "number": "11", "name": "RNF", "type": "passive",- "description": "Current sense resistor terminal; connect 0.15\u03a9 to 0.5\u03a9 resistor between RNF and GND for overcurrent detection."+ "description": "Current sense resistor terminal; connect 0.15Ω to 0.5Ω resistor between RNF and GND for overcurrent detection." }, { "number": "12", "name": "RCL", "type": "input",- "description": "Current limit comparator input; connects to RNF voltage for overcurrent detection threshold at 0.2V \u00b110%."+ "description": "Current limit comparator input; connects to RNF voltage for overcurrent detection threshold at 0.2V ±10%." }, { "number": "13", "name": "HUP", "type": "input",- "description": "U phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "U phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "14", "name": "HUN", "type": "input",- "description": "U phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "U phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "15", "name": "HVP", "type": "input",- "description": "V phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "V phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "16", "name": "HVN", "type": "input",- "description": "V phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "V phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "17", "name": "HWP", "type": "input",- "description": "W phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "W phase Hall comparator positive input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "18", "name": "HWN", "type": "input",- "description": "W phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and \u00b115mV (Typ) hysteresis."+ "description": "W phase Hall comparator negative input; accepts differential Hall signal with 50mVp-p minimum and ±15mV (Typ) hysteresis." }, { "number": "19",@@ -152,31 +152,31 @@ "number": "20", "name": "ENB", "type": "input",- "description": "Enable control input (negative logic); pulled up to VREG through 100k\u03a9; enables motor operation when ENB < 0.8V."+ "description": "Enable control input (negative logic); pulled up to VREG through 100kΩ; enables motor operation when ENB < 0.8V." }, { "number": "21", "name": "CW", "type": "input",- "description": "Rotation direction control; pulled up to VREG through 100k\u03a9; selects clockwise (H) or counterclockwise (L) rotation."+ "description": "Rotation direction control; pulled up to VREG through 100kΩ; selects clockwise (H) or counterclockwise (L) rotation." }, { "number": "22", "name": "PWMB", "type": "input",- "description": "PWM speed control input (negative logic); pulled up to VREG through 100k\u03a9; minimum 1ms pulse width for synchronous rectification."+ "description": "PWM speed control input (negative logic); pulled up to VREG through 100kΩ; minimum 1ms pulse width for synchronous rectification." }, { "number": "23", "name": "BRKB", "type": "input",- "description": "Brake control input (negative logic); pulled up to VREG through 100k\u03a9; forces short brake (all outputs low) when BRKB < 0.8V."+ "description": "Brake control input (negative logic); pulled up to VREG through 100kΩ; forces short brake (all outputs low) when BRKB < 0.8V." }, { "number": "24", "name": "FGSW", "type": "input",- "description": "FG output format selector; pulled up to VREG through 100k\u03a9; selects 3FG output (H) or 1FG output (L)."+ "description": "FG output format selector; pulled up to VREG through 100kΩ; selects 3FG output (H) or 1FG output (L)." }, { "number": "25",@@ -262,5 +262,8 @@ "docs/bd63006muv-e2-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }