bd433m5fp-ce2

@@ -31,5 +31,54 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "BD433M5FP-CE2",+    "manufacturer": "ROHM",+    "package": "TO-252",+    "pin_count": 4,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "bd433m5fp-ce2.kicad_sym",+      "footprint": "bd433m5fp-ce2.kicad_mod",+      "model_3d": "bd433m5fp-ce2-etched.glb",+      "model_3d_plain": "bd433m5fp-ce2.glb",+      "model_3d_step": "bd433m5fp-ce2-etched.step",+      "model_3d_step_plain": "bd433m5fp-ce2.step",+      "lbr": "bd433m5fp-ce2.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input pin. Absolute maximum -0.3 V to +45.0 V; recommended operating range 4.0 V to 42 V (start-up 3.0 V min at IOUT = 0 mA). Bypass to GND with CIN ≥ 0.1 µF located close to the pin."+      },+      {+        "number": "2",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not Connected internally. May be left open, but ROHM recommends shorting to GND on the PCB for best practice."+      },+      {+        "number": "3",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 3.3 V (Typ., ±2 %) output pin. Delivers up to 500 mA. Requires COUT ≥ 10 µF (Typ., ≥ 6 µF over temp/DC-bias) between VOUT and GND for stable operation; ceramic (X5R/X7R), tantalum, or electrolytic accepted. Absolute max VOUT range -0.3 V to +8.0 V."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / exposed thermal tab (FIN) on the back of the TO-252-3 package. Also serves as the primary heat-sinking path - solder to a copper pour for improved θJA. Keep at the lowest system potential under all operating conditions."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}