bd33ka5fp-e2

@@ -33,5 +33,54 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "BD33KA5FP-E2",+    "manufacturer": "ROHM",+    "package": "TO-252-2(DPAK)",+    "pin_count": 4,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "bd33ka5fp-e2.kicad_sym",+      "footprint": "bd33ka5fp-e2.kicad_mod",+      "model_3d": "bd33ka5fp-e2-etched.glb",+      "model_3d_plain": "bd33ka5fp-e2.glb",+      "model_3d_step": "bd33ka5fp-e2-etched.step",+      "model_3d_step_plain": "bd33ka5fp-e2.step",+      "lbr": "bd33ka5fp-e2.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "Vcc",+        "type": "power_in",+        "description": "Input power supply. Recommended operating range 2.3V to 5.5V (absolute max 7.0V). Attach a decoupling capacitor (≥1μF ceramic) between Vcc and GND close to the pin."+      },+      {+        "number": "2",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected on the BDxxKA5FP TO252-3 no-switch variant. Datasheet explicitly notes 'N.C.(2PIN)' for BDxxKA5FP. Leave floating or tie to GND for mechanical support."+      },+      {+        "number": "3",+        "name": "Vo",+        "type": "power_out",+        "description": "Regulated 3.3V output, up to 500mA peak. Attach a ≥1μF low-ESR ceramic (X5R/X7R) anti-oscillation capacitor between Vo and GND. Load regulation typ. 25mV (Io=0→500mA); line regulation typ. 10mV."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground, exposed on the TO252-3 heat-sink tab (FIN). Datasheet explicitly notes 'GND(FIN)' for BDxxKA5FP. Solder to a wide copper ground plane for thermal dissipation (θja=104.2 ℃/W on a 70×70×1.6mm board with 7×7mm² copper)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}