BAV199-7-F
Public Made by Adomby adom
Diodes Incorporated Diodes - General Purpose, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Incorrect common-cathode pin functions on dual-series BAV199
Versions: BAV199-7-F catalog/package 0.1.0; adom-wiki 1.7.69; adom-lbr 2.47.4. Found during custom electronic-load component review on 2026-10-11. No desktop Bridge is involved in the error.
The page metadata, README and native symbol label pin2 A2 and pin3 K/common cathode. Diodes Incorporated's primary BAV199 datasheet DS30232 Rev11-2 (November2022), page1 internal schematic, shows a dual-series device: pin1 A1, pin2 K2, pin3 K1/A2; forward conduction paths 1→3 and3→2.
Source: https://www.diodes.com/datasheet/download/BAV199.pdf
Reproduce: download page.json and bav199-7-f.kicad_sym from version0.1.0 and compare the pin descriptions/internal topology with the manufacturer schematic. Matching symbol/footprint pin-number sets passes despite incorrect functions. The stored two-model extraction consensus is therefore not sufficient evidence of topology.
Prepared correction: pin names/descriptions, D reference prefix, footprint binding, regenerated EAGLE/hub libraries and symbol viewer. Three pins survive native rendering/export and EAGLE lint passes. Existing package geometry is preserved; virtual marked board-use model is kept when rebuilding the hero. Publication/readback will be recorded separately. No board nets are changed by this repair. The load's current D3 mapping already uses the correct series arrangement.
No new interactive screenshot was captured because the user closed the task browser. Source files are attached for exact reproduction.