ba3474f-e2

@@ -33,5 +33,114 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "BA3474F-E2",+    "manufacturer": "ROHM",+    "package": "SOP-14-175mil",+    "pin_count": 14,+    "category": "Operational Amplifier",+    "parts": {+      "symbol": "ba3474f-e2.kicad_sym",+      "footprint": "ba3474f-e2.kicad_mod",+      "model_3d": "ba3474f-e2-etched.glb",+      "model_3d_plain": "ba3474f-e2.glb",+      "model_3d_step": "ba3474f-e2-etched.step",+      "model_3d_step_plain": "ba3474f-e2.step",+      "lbr": "ba3474f-e2.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT1",+        "type": "output",+        "description": "Op-amp channel 1 output. Drives up to ±30mA (typ) source/sink; output swing typically reaches within ~1V of VCC and ~0.1V of VEE with a 10kΩ load."+      },+      {+        "number": "2",+        "name": "-IN1",+        "type": "input",+        "description": "Op-amp channel 1 inverting input. Input bias current 100nA (typ), 500nA (max). Common-mode input range extends from VEE-0.3V up to VCC-2.0V (typ 0 to VCC-2.0V for normal operation)."+      },+      {+        "number": "3",+        "name": "+IN1",+        "type": "input",+        "description": "Op-amp channel 1 non-inverting input. Input bias current 100nA (typ). Operates with input voltage near the GND (VEE) rail."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply pin. Single-supply +3.0V to +36.0V or dual supply +1.5V to +18.0V. Total quiescent supply current 8mA (typ), 11mA (max) with no load."+      },+      {+        "number": "5",+        "name": "+IN2",+        "type": "input",+        "description": "Op-amp channel 2 non-inverting input. Input bias current 100nA (typ). Operates with input voltage near the GND (VEE) rail."+      },+      {+        "number": "6",+        "name": "-IN2",+        "type": "input",+        "description": "Op-amp channel 2 inverting input. Input bias current 100nA (typ), 500nA (max)."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Op-amp channel 2 output. Drives up to ±30mA (typ) source/sink. Channel separation from adjacent channels is 120dB (typ) at 1kHz."+      },+      {+        "number": "8",+        "name": "OUT3",+        "type": "output",+        "description": "Op-amp channel 3 output. Drives up to ±30mA (typ) source/sink."+      },+      {+        "number": "9",+        "name": "-IN3",+        "type": "input",+        "description": "Op-amp channel 3 inverting input. Input bias current 100nA (typ), 500nA (max)."+      },+      {+        "number": "10",+        "name": "+IN3",+        "type": "input",+        "description": "Op-amp channel 3 non-inverting input. Input bias current 100nA (typ). Operates with input voltage near the GND (VEE) rail."+      },+      {+        "number": "11",+        "name": "VEE",+        "type": "power_in",+        "description": "Negative supply pin (or GND in single-supply operation). Supply differential VCC-VEE rated for +36V maximum. In single-supply use, connect to GND."+      },+      {+        "number": "12",+        "name": "+IN4",+        "type": "input",+        "description": "Op-amp channel 4 non-inverting input. Input bias current 100nA (typ). Operates with input voltage near the GND (VEE) rail."+      },+      {+        "number": "13",+        "name": "-IN4",+        "type": "input",+        "description": "Op-amp channel 4 inverting input. Input bias current 100nA (typ), 500nA (max)."+      },+      {+        "number": "14",+        "name": "OUT4",+        "type": "output",+        "description": "Op-amp channel 4 output. Drives up to ±30mA (typ) source/sink. Output swing 3.7V min / 4V typ (high) at VCC=5V, RL=2kΩ."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}