component
AZ1117ID-3.3TRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-2. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json: fold the "TAB" entry into pin 2. On TO-252-2 the tab is not a separate pad - it is that lead - so nothing was ever unconnected, but the page listed it as its own pin and pads.json reported pin-not-in-symbol for a pin that cannot exist. Target chosen because net VOUT matches pin 2; the tab's description is merged into that pin rather than dropped.
2 files changed
+4−17
pads.json+2−9@@ -24,14 +24,7 @@ "3" ], "paste_apertures": 4,- "issues": [- {- "kind": "pin-not-in-symbol",- "pin": "TAB",- "name": "VOUT",- "detail": "page.json describes pin \"TAB\" (VOUT) from the datasheet, but the symbol has no such pin, so nothing can connect to it"- }- ],+ "issues": [], "pads": [ { "pad": "1",@@ -84,7 +77,7 @@ "pin": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3V output (Typ 3.3V, ±1% initial accuracy, ±1.5% over temperature). Rated for ≥1A load current with 1.35A typical current limit. Requires a minimum 10µF low-ESR (<20Ω) ceramic capacitor to ground for stability.",+ "description": "Regulated 3.3V output (Typ 3.3V, ±1% initial accuracy, ±1.5% over temperature). Rated for ≥1A load current with 1.35A typical current limit. Requires a minimum 10µF low-ESR (<20Ω) ceramic capacitor to ground for stability. Also the package tab: exposed thermal tab, electrically connected to VOUT (pin 2). Provides the primary heat conduction path to the PCB copper - thermal resistance θ_JA drops from 100°C/W (no heatsink) to 70°C/W (soldered to 100mm² 2oz copper, 8×0.5mm vias). Solder to a copper pour that is also the V_OUT net.", "is_pin1": false, "source": { "geometry": "TO-252-2.kicad_mod",
page.json+2−8@@ -15,7 +15,7 @@ "mpn": "AZ1117ID-3.3TRG1", "manufacturer": "Diodes Incorporated AZ1117ID 3 3TRG1", "package": "TO-252-2",- "pin_count": 4,+ "pin_count": 3, "category": "PMIC", "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators", "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2111301930_Diodes-Incorporated-AZ1117ID-3-3TRG1_C2926306.pdf",@@ -40,19 +40,13 @@ "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3V output (Typ 3.3V, \u00b11% initial accuracy, \u00b11.5% over temperature). Rated for \u22651A load current with 1.35A typical current limit. Requires a minimum 10\u00b5F low-ESR (<20\u03a9) ceramic capacitor to ground for stability."+ "description": "Regulated 3.3V output (Typ 3.3V, \u00b11% initial accuracy, \u00b11.5% over temperature). Rated for \u22651A load current with 1.35A typical current limit. Requires a minimum 10\u00b5F low-ESR (<20\u03a9) ceramic capacitor to ground for stability. Also the package tab: exposed thermal tab, electrically connected to VOUT (pin 2). Provides the primary heat conduction path to the PCB copper - thermal resistance \u03b8_JA drops from 100\u00b0C/W (no heatsink) to 70\u00b0C/W (soldered to 100mm\u00b2 2oz copper, 8\u00d70.5mm vias). Solder to a copper pour that is also the V_OUT net." }, { "number": "3", "name": "VIN", "type": "power_in", "description": "Unregulated input supply. Recommended operating range is up to 15V; absolute maximum is 18V. For 3.3V output, V_IN must exceed V_OUT by the dropout voltage (typ 1.3V, max 1.4V on TO252-2 at I_OUT = 0.8A). Bypass with \u226510\u00b5F capacitor to ground."- },- {- "number": "TAB",- "name": "VOUT",- "type": "power_out",- "description": "Exposed thermal tab, electrically connected to VOUT (pin 2). Provides the primary heat conduction path to the PCB copper - thermal resistance \u03b8_JA drops from 100\u00b0C/W (no heatsink) to 70\u00b0C/W (soldered to 100mm\u00b2 2oz copper, 8\u00d70.5mm vias). Solder to a copper pour that is also the V_OUT net." } ], "provenance": {