az1117cd-3-3trg1

@@ -33,5 +33,49 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AZ1117CD-3.3TRG1",+    "manufacturer": "Diodes Incorporated AZ1117CD 3 3TRG1",+    "package": "TO-252-2",+    "pin_count": 3,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AZ1117CD-3.3TRG1.pdf",+    "parts": {+      "symbol": "az1117cd-3-3trg1.kicad_sym",+      "footprint": "az1117cd-3-3trg1.kicad_mod",+      "model_3d": "az1117cd-3-3trg1-etched.glb",+      "model_3d_plain": "az1117cd-3-3trg1.glb",+      "model_3d_step": "az1117cd-3-3trg1-etched.step",+      "model_3d_step_plain": "az1117cd-3-3trg1.step",+      "lbr": "az1117cd-3-3trg1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / adjust pin. On the fixed 3.3V (AZ1117C-3.3) version the internal adjust resistor divider is factory-connected, so this pin serves as the device ground reference. Connect directly to the system ground plane."+      },+      {+        "number": "2",+        "name": "OUTPUT",+        "type": "power_out",+        "description": "Regulated 3.3V output (3.267V-3.333V typ at TJ=+25°C; 3.235V-3.365V over -20°C to +125°C). Requires a minimum 10µF output capacitor with ESR < 20Ω (low-ESR ceramic is compatible). Current limit is 1.35A typical."+      },+      {+        "number": "3",+        "name": "INPUT",+        "type": "power_in",+        "description": "Unregulated input supply pin. Absolute maximum 18V; recommended operating maximum 15V. Requires ≥1.5V headroom above VOUT for regulation; dropout at 0.8A is typically 1.3V (TO252-2). A 10µF input capacitor is recommended for stability and transient response."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}