az1117cd-3-3trg1

@@ -0,0 +1,150 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AZ1117CD-3.3TRG1",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 3,+      "span_mm": 12.7,+      "dash_mm": 0.3175,+      "gap_mm": 0.1905,+      "pad_stroke_mm": 0.0762+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 5,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 3,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.848,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.79,+      4.11,+      -3.25,+      3.25+    ],+    "pads_bbox_mm": [+      -6.14,+      4.46,+      -2.9,+      2.9+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "az1117cd-3-3trg1-etched.glb",+    "glb_sha256": "9ca90958bf18aa65c1e0a7f5cb5f9cc01c74736def0587d93089a0d0c6c6f0f6",+    "footprint": "az1117cd-3-3trg1.kicad_mod",+    "footprint_sha256": "18c28e5e147d5e9b17a8ccf47f4992abde94d1436cc611e6f7e395af6edc4969",+    "pins": "page.json component.pins",+    "pins_sha256": "bef07d56e3b2ad5961edadfb1f8b0928cc99d0dc9a483f1c94824c2475e0f7f1"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "GND",+      "x": -6.29,+      "y": -2.28,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "OUTPUT",+      "x": 4.61,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "INPUT",+      "x": -6.29,+      "y": 2.28,+      "align": "right",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -5.04,+        -2.28+      ],+      "size_mm": [+        2.2,+        1.2+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        1.26,+        0.0+      ],+      "size_mm": [+        6.4,+        5.8+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -5.04,+        2.28+      ],+      "size_mm": [+        2.2,+        1.2+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "az1117cd-3-3trg1",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Diodes Incorporated AZ1117CD 3 3TRG1 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252-2. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -26,7 +26,9 @@     "viewers/symbol.html",     "viewers/footprint.html",     "az1117cd-3-3trg1-etched.step",-    "az1117cd-3-3trg1-etched.glb"+    "az1117cd-3-3trg1-etched.glb",+    "az1117cd-3-3trg1-hero.glb",+    "az1117cd-3-3trg1-hero.overlay.json"   ],   "metadata": {     "characteristics": {@@ -60,5 +62,106 @@       ]     }   },-  "visibility": "public"+  "visibility": "public",+  "component": {+    "mpn": "AZ1117CD-3.3TRG1",+    "manufacturer": "Diodes Incorporated AZ1117CD 3 3TRG1",+    "package": "TO-252-2",+    "pin_count": 3,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AZ1117CD-3.3TRG1.pdf",+    "parts": {+      "symbol": "az1117cd-3-3trg1.kicad_sym",+      "footprint": "az1117cd-3-3trg1.kicad_mod",+      "model_3d": "az1117cd-3-3trg1-hero.glb",+      "model_3d_plain": "az1117cd-3-3trg1.glb",+      "model_3d_step": "az1117cd-3-3trg1-etched.step",+      "model_3d_step_plain": "az1117cd-3-3trg1.step",+      "lbr": "az1117cd-3-3trg1.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / adjust pin. On the fixed 3.3V (AZ1117C-3.3) version the internal adjust resistor divider is factory-connected, so this pin serves as the device ground reference. Connect directly to the system ground plane."+      },+      {+        "number": "2",+        "name": "OUTPUT",+        "type": "power_out",+        "description": "Regulated 3.3V output (3.267V-3.333V typ at TJ=+25°C; 3.235V-3.365V over -20°C to +125°C). Requires a minimum 10µF output capacitor with ESR < 20Ω (low-ESR ceramic is compatible). Current limit is 1.35A typical."+      },+      {+        "number": "3",+        "name": "INPUT",+        "type": "power_in",+        "description": "Unregulated input supply pin. Absolute maximum 18V; recommended operating maximum 15V. Requires ≥1.5V headroom above VOUT for regulation; dropout at 0.8A is typically 1.3V (TO252-2). A 10µF input capacitor is recommended for stability and transient response."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "lcsc": "C460427",+      "digikey": "AZ1117CD-3.3TRG1DITR-ND",+      "mouser": false+    },+    "distributor_check": {+      "checked_at": "2026-10-05T18:53:30Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": "AZ1117CD-3.3TRG1DITR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "models_3d": [+      {+        "file": "az1117cd-3-3trg1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.9,+          6.5,+          2.32+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "3eb4c99603a4fe837c2fe9308bc174769ded87a785a0df48d2dc441432ee8b4c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "az1117cd-3-3trg1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.9,+          6.5,+          2.32+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "f252c5d699c945d58c5d2b2144917a7c920c15b46bcc1f33c714893c39625835",+        "checked": "2026-10-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  } }