component
AVR32DB28-I
Public Made by Adomby adom
Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+278−8@@ -1,13 +1,288 @@ {+ "schema_version": 1,+ "type": "component", "slug": "avr32db28-i",+ "title": "AVR32DB28-I",+ "brief": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "embedded processors & controllers", "avr32db28-i" ],+ "component": {+ "mpn": "AVR32DB28-I",+ "manufacturer": "Microchip Tech",+ "package": "SSOP-28",+ "pin_count": 28,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590442912581382144",+ "parts": {+ "symbol": "avr32db28-i.kicad_sym",+ "footprint": "avr32db28-i.kicad_mod",+ "model_3d": "avr32db28-i.glb",+ "model_3d_step": "avr32db28-i.step",+ "lbr": "avr32db28-i.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 7. Alternate functions: CLKOUT (system clock output), CCL LUT0/LUT1/LUT2 OUT, TCB0 XDIR (alt), SPI0 SS (alt), TCD0 WOD, EVSYS EVOUTA (alt). Supports asynchronous external interrupt detection."+ },+ {+ "number": "2",+ "name": "PC0",+ "type": "bidirectional",+ "description": "General-purpose I/O port C pin 0 in the VDDIO2 power domain (MVIO). Alternate functions: USART1 TxD, SPI1 MOSI, TCA0 WO0 (alt), TCB2 WO, CCL LUT1 IN0."+ },+ {+ "number": "3",+ "name": "PC1",+ "type": "bidirectional",+ "description": "General-purpose I/O port C pin 1 in the VDDIO2 power domain (MVIO). Alternate functions: USART1 RxD, SPI1 MISO, TCA0 WO1 (alt), TCB3 WO (alt), CCL LUT1 IN1."+ },+ {+ "number": "4",+ "name": "PC2",+ "type": "bidirectional",+ "description": "General-purpose I/O port C pin 2 in the VDDIO2 power domain (MVIO). Alternate functions: TWI Fm+ capable, USART1 XCK, SPI1 SCK, TWI0 SDA (host/client, alt position), TCA0 WO2 (alt), EVSYS EVOUTC, CCL LUT1 IN2."+ },+ {+ "number": "5",+ "name": "PC3",+ "type": "bidirectional",+ "description": "General-purpose I/O port C pin 3 in the VDDIO2 power domain (MVIO). Alternate functions: TWI Fm+ capable, USART1 XDIR, SPI1 SS, TWI0 SCL (host/client, alt position), TCA0 WO3 (alt), CCL LUT1 OUT."+ },+ {+ "number": "6",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "Multi-Voltage I/O (MVIO) supply input for PORTC. Independent 1.8-5.5 V supply that sets the digital I/O levels for PC0-PC3 on this device. Requires local decoupling (typ. 1 \u00b5F + 100 nF) referenced to the nearest GND pin."+ },+ {+ "number": "7",+ "name": "PD1",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 1 in the AVDD power domain. Analog function: ADC0 AIN1, OPAMP0 INP, ZCD0 ZCIN. Alternate digital functions: TCA0 WO1 (alt), CCL LUT2 IN1."+ },+ {+ "number": "8",+ "name": "PD2",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 2 in the AVDD power domain. Analog function: ADC0 AIN2, AC0/AC1/AC2 AINP0, OPAMP0 OUT (op-amp 0 output). Alternate digital functions: TCA0 WO2 (alt), EVSYS EVOUTD, CCL LUT2 IN2."+ },+ {+ "number": "9",+ "name": "PD3",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 3 in the AVDD power domain. Analog function: ADC0 AIN3, AC0 AINN0, AC1 AINP1, OPAMP0 INN. Alternate digital functions: TCA0 WO3 (alt), CCL LUT2 OUT."+ },+ {+ "number": "10",+ "name": "PD4",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 4 in the AVDD power domain. Analog function: ADC0 AIN4, AC1 AINP2, AC2 AINP1, OPAMP1 INP. Alternate digital functions: TCA0 WO4 (alt)."+ },+ {+ "number": "11",+ "name": "PD5",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 5 in the AVDD power domain. Analog function: ADC0 AIN5, AC1 AINN0, OPAMP1 OUT (op-amp 1 output). Alternate digital functions: TCA0 WO5 (alt)."+ },+ {+ "number": "12",+ "name": "PD6",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 6 in the AVDD power domain. Analog function: ADC0 AIN6, AC0/AC1/AC2 AINP3, DAC0 OUT (10-bit DAC output). Alternate digital function: CCL LUT2 OUT (alt)."+ },+ {+ "number": "13",+ "name": "PD7",+ "type": "bidirectional",+ "description": "General-purpose I/O port D pin 7 in the AVDD power domain. Analog function: VREFA (external analog reference input for ADC/DAC), ADC0 AIN7, AC0/AC1 AINN2, AC2 AINN0/AINN2, OPAMP1 INN. Alternate digital function: EVSYS EVOUTD (alt)."+ },+ {+ "number": "14",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog supply pin (1.8-5.5 V). Internally connected to VDD on this device family, but must be externally tied to the same supply as VDD with a dedicated local decoupling capacitor (typ. 1 \u00b5F + 100 nF) to the nearest AGND pin."+ },+ {+ "number": "15",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground return (AGND) for the AVDD domain. Must be tied to the board ground plane; provides the return path for the analog decoupling capacitor on AVDD."+ },+ {+ "number": "16",+ "name": "PF0",+ "type": "bidirectional",+ "description": "General-purpose I/O port F pin 0 in the VDD power domain. Special function: XTAL32K1 (input for external 32.768 kHz crystal oscillator). Alternate functions: USART2 TxD, TCA0 WO0 (alt), TCD0 WOA (alt), CCL LUT3 IN0."+ },+ {+ "number": "17",+ "name": "PF1",+ "type": "bidirectional",+ "description": "General-purpose I/O port F pin 1 in the VDD power domain. Special function: XTAL32K2 (feedback/output for external 32.768 kHz crystal oscillator). Alternate functions: USART2 RxD, TCA0 WO1 (alt), TCD0 WOB (alt), CCL LUT3 IN1."+ },+ {+ "number": "18",+ "name": "PF6",+ "type": "input",+ "description": "External RESET input (active-low). Configurable via RSTPINCFG in the System Configuration fuses to act as either the dedicated RESET pin or an input-only PORTF pin. Internal pull-up is present; external pull-up not normally required. A logic-low level triggers a device Reset."+ },+ {+ "number": "19",+ "name": "UPDI",+ "type": "bidirectional",+ "description": "Unified Program and Debug Interface - dedicated single-wire pin for programming and debugging the device. Half-duplex UART-like protocol; connect through a series resistor to the programmer's UPDI line. Also usable as GPIO after configuring the UPDI pin function."+ },+ {+ "number": "20",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply input (1.8-5.5 V). Provides power to the CPU core, digital peripherals, and PORTA/PORTD/PORTF I/O. Requires local decoupling (typ. 1 \u00b5F + 100 nF) referenced to the adjacent GND pin."+ },+ {+ "number": "21",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground return for VDD. Must be tied to the board ground plane; carries the return current for the VDD decoupling capacitor."+ },+ {+ "number": "22",+ "name": "PA0",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 0. Special functions: XTALHF1 (input for external high-frequency crystal oscillator), EXTCLK (external clock input). Alternate functions: USART0 TxD, TCA0 WO0, CCL LUT0 IN0."+ },+ {+ "number": "23",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 1. Special function: XTALHF2 (feedback/output for external high-frequency crystal oscillator). Alternate functions: USART0 RxD, TCA0 WO1, CCL LUT0 IN1."+ },+ {+ "number": "24",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 2. Fm+ (1 MHz) TWI capable. Alternate functions: USART0 XCK, TWI0 SDA (host/client), TCA0 WO2, TCB0 WO, EVSYS EVOUTA, CCL LUT0 IN2."+ },+ {+ "number": "25",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 3. Fm+ (1 MHz) TWI capable. Alternate functions: USART0 XDIR, TWI0 SCL (host/client), TCA0 WO3, TCB1 WO, CCL LUT0 OUT."+ },+ {+ "number": "26",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 4. Alternate functions: USART0 TxD (alt), SPI0 MOSI, TCA0 WO4, TCD0 WOA."+ },+ {+ "number": "27",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 5. Alternate functions: USART0 RxD (alt), SPI0 MISO, TCA0 WO5, TCD0 WOB."+ },+ {+ "number": "28",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O port A pin 6. Alternate functions: USART0 XCK (alt), SPI0 SCK, TCD0 WOC, CCL LUT0 OUT (alt)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590442912581382144",+ "pages": null,+ "sha256": "adfeb5005d481e53",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 28,+ "described": 28,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip Tech",+ "Package": "SSOP-28",+ "Category": "Embedded Processors & Controllers",+ "Pins": "28"+ }+ },+ "variants": [+ {+ "mpn": "AVR32DB28-II/SO",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IT-I/SO",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IE/SO",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IT-E/SO",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-II/SS",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IT-I/SS",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IE/SS",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IT-E/SS",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-II/SP",+ "kind": "packaging"+ },+ {+ "mpn": "AVR32DB28-IE/SP",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "avr32db28-i"+ ],+ "discovery_pitch": "AVR32DB28-I (Microchip Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +300,5 @@ "docs/avr32db28-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }