attiny88-au

@@ -33,5 +33,222 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "ATTINY88-AU",+    "manufacturer": "Microchip",+    "package": "TQFP-32(7x7)",+    "pin_count": 32,+    "category": "Microcontrollers (MCU/MPU/SOC)",+    "parts": {+      "symbol": "attiny88-au.kicad_sym",+      "footprint": "attiny88-au.kicad_mod",+      "model_3d": "attiny88-au-etched.glb",+      "model_3d_plain": "attiny88-au.glb",+      "model_3d_step": "attiny88-au-etched.step",+      "model_3d_step_plain": "attiny88-au.step",+      "lbr": "attiny88-au.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "PD3",+        "type": "bidirectional",+        "description": "Port D bit 3, general-purpose I/O with internal pull-up. Alt: PCINT19 (pin-change interrupt), INT1 (external interrupt 1)."+      },+      {+        "number": "2",+        "name": "PD4",+        "type": "bidirectional",+        "description": "Port D bit 4, general-purpose I/O with internal pull-up. Alt: PCINT20, T0 (Timer/Counter0 external clock input)."+      },+      {+        "number": "3",+        "name": "PA2",+        "type": "bidirectional",+        "description": "Port A bit 2, general-purpose I/O with internal pull-up (32-lead packages only). Alt: PCINT26."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Digital supply voltage, 1.8-5.5 V. Bypass with local decoupling capacitor to GND."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Digital ground return."+      },+      {+        "number": "6",+        "name": "PA3",+        "type": "bidirectional",+        "description": "Port A bit 3, general-purpose I/O with internal pull-up (32-lead packages only). Alt: PCINT27."+      },+      {+        "number": "7",+        "name": "PB6/CLKI",+        "type": "bidirectional",+        "description": "Port B bit 6, general-purpose I/O with internal pull-up. Alt: PCINT6, CLKI (external clock / crystal oscillator input, depending on CKSEL fuse)."+      },+      {+        "number": "8",+        "name": "PB7",+        "type": "bidirectional",+        "description": "Port B bit 7, general-purpose I/O with internal pull-up. Alt: PCINT7. In external crystal mode this pin pairs with PB6 as XTAL2 (oscillator output)."+      },+      {+        "number": "9",+        "name": "PD5",+        "type": "bidirectional",+        "description": "Port D bit 5, general-purpose I/O with internal pull-up. Alt: PCINT21, T1 (Timer/Counter1 external clock input)."+      },+      {+        "number": "10",+        "name": "PD6",+        "type": "bidirectional",+        "description": "Port D bit 6, general-purpose I/O with internal pull-up. Alt: PCINT22, AIN0 (analog comparator positive input)."+      },+      {+        "number": "11",+        "name": "PD7",+        "type": "bidirectional",+        "description": "Port D bit 7, general-purpose I/O with internal pull-up. Alt: PCINT23, AIN1 (analog comparator negative input)."+      },+      {+        "number": "12",+        "name": "PB0",+        "type": "bidirectional",+        "description": "Port B bit 0, general-purpose I/O with internal pull-up. Alt: PCINT0, CLKO (system clock output when CKOUT fuse programmed), ICP1 (Timer/Counter1 input capture)."+      },+      {+        "number": "13",+        "name": "PB1",+        "type": "bidirectional",+        "description": "Port B bit 1, general-purpose I/O with internal pull-up. Alt: PCINT1, OC1A (Timer/Counter1 compare-match output A / PWM)."+      },+      {+        "number": "14",+        "name": "PB2/SS",+        "type": "bidirectional",+        "description": "Port B bit 2, general-purpose I/O with internal pull-up. Alt: PCINT2, SS (SPI slave-select, active-low), OC1B (Timer/Counter1 compare-match output B / PWM)."+      },+      {+        "number": "15",+        "name": "PB3/MOSI",+        "type": "bidirectional",+        "description": "Port B bit 3, general-purpose I/O with internal pull-up. Alt: PCINT3, MOSI (SPI master-out / slave-in data)."+      },+      {+        "number": "16",+        "name": "PB4/MISO",+        "type": "bidirectional",+        "description": "Port B bit 4, general-purpose I/O with internal pull-up. Alt: PCINT4, MISO (SPI master-in / slave-out data)."+      },+      {+        "number": "17",+        "name": "PB5/SCK",+        "type": "bidirectional",+        "description": "Port B bit 5, general-purpose I/O with internal pull-up. Alt: PCINT5, SCK (SPI clock)."+      },+      {+        "number": "18",+        "name": "AVCC",+        "type": "power_in",+        "description": "Analog supply pin for the ADC and for I/O pins PC7, PC[5:0] and (32-lead only) PA[1:0]. Must be connected to VCC even if the ADC is unused; connect through an LC low-pass filter when ADC accuracy matters."+      },+      {+        "number": "19",+        "name": "PA0",+        "type": "bidirectional",+        "description": "Port A bit 0, general-purpose I/O with internal pull-up (32-lead only), powered from AVCC. Alt: ADC6 (ADC channel 6, 10-bit), PCINT24."+      },+      {+        "number": "20",+        "name": "PC7",+        "type": "bidirectional",+        "description": "Port C bit 7, general-purpose I/O with internal pull-up, powered from AVCC. Alt: PCINT15."+      },+      {+        "number": "21",+        "name": "GND",+        "type": "power_in",+        "description": "Analog/second ground return; tie to system GND plane."+      },+      {+        "number": "22",+        "name": "PA1",+        "type": "bidirectional",+        "description": "Port A bit 1, general-purpose I/O with internal pull-up (32-lead only), powered from AVCC. Alt: ADC7 (ADC channel 7, 10-bit), PCINT25."+      },+      {+        "number": "23",+        "name": "PC0",+        "type": "bidirectional",+        "description": "Port C bit 0, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC0 (ADC channel 0), PCINT8."+      },+      {+        "number": "24",+        "name": "PC1",+        "type": "bidirectional",+        "description": "Port C bit 1, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC1 (ADC channel 1), PCINT9."+      },+      {+        "number": "25",+        "name": "PC2",+        "type": "bidirectional",+        "description": "Port C bit 2, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC2 (ADC channel 2), PCINT10."+      },+      {+        "number": "26",+        "name": "PC3",+        "type": "bidirectional",+        "description": "Port C bit 3, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC3 (ADC channel 3), PCINT11."+      },+      {+        "number": "27",+        "name": "PC4/SDA",+        "type": "bidirectional",+        "description": "Port C bit 4, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC4 (ADC channel 4), SDA (2-wire/I2C data line), PCINT12."+      },+      {+        "number": "28",+        "name": "PC5/SCL",+        "type": "bidirectional",+        "description": "Port C bit 5, general-purpose I/O with internal pull-up, powered from AVCC. Alt: ADC5 (ADC channel 5), SCL (2-wire/I2C clock line), PCINT13."+      },+      {+        "number": "29",+        "name": "PC6/RESET",+        "type": "input",+        "description": "Reset input (active-low) by default; asserting low for longer than the minimum pulse width triggers a reset even when the clock is stopped. If the RSTDISBL fuse is programmed, this pin becomes a general-purpose I/O (PC6) with electrical characteristics that differ from the rest of Port C."+      },+      {+        "number": "30",+        "name": "PD0",+        "type": "bidirectional",+        "description": "Port D bit 0, general-purpose I/O with internal pull-up. Alt: PCINT16."+      },+      {+        "number": "31",+        "name": "PD1",+        "type": "bidirectional",+        "description": "Port D bit 1, general-purpose I/O with internal pull-up. Alt: PCINT17."+      },+      {+        "number": "32",+        "name": "PD2",+        "type": "bidirectional",+        "description": "Port D bit 2, general-purpose I/O with internal pull-up. Alt: PCINT18, INT0 (external interrupt 0)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}