ATTINY4313-SU

@@ -0,0 +1,119 @@+# ATTINY4313-SU++**Microchip Tech** · Global Sourcing Parts · SOIC-20-300mil++ATTINY4313-SU from Microchip Tech, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA2 (RESET/dW/PCINT10) | bidirectional | Port A bit 2 is a bi-directional I/O pin with internal pull-up, tri-stated when reset is active; it doubles as the active-low RESET input unless the RSTDISBL fuse is programmed, and as debugWIRE (dW). |+| 2 | PD0 (RXD/PCINT11) | bidirectional | Port D bit 0 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the RXD (USART receive) alternate function. |+| 3 | PD1 (TXD/PCINT12) | bidirectional | Port D bit 1 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the TXD (USART transmit) alternate function. |+| 4 | PA1/XTAL2/PCINT9 | bidirectional | Port A bit 1 is a bi-directional I/O pin with internal pull-up, tri-stated when reset is active, and it serves as XTAL2, the output from the inverting oscillator amplifier. |+| 5 | PA0 (XTAL1/CLKI/PCINT8) | bidirectional | Port A bit 0 is a bi-directional I/O pin with internal pull-up, tri-stated when reset is active, and it serves as XTAL1, the input to the inverting oscillator amplifier and internal clock circuit. |+| 6 | PD2 (INT0/XCK/CKOUT/PCINT13) | bidirectional | Port D bit 2 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the CKOUT, XCK and INT0 alternate functions shown in Figure 1-1. |+| 7 | PD3 (INT1/PCINT14) | bidirectional | Port D bit 3 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the INT1 external interrupt alternate function. |+| 8 | PD4/T0/PCINT15 | bidirectional | Port D bit 4 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the T0 Timer/Counter0 clock input alternate function. |+| 9 | PD5 (T1/OC0B/PCINT16) | bidirectional | Port D bit 5 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the T1 and OC0B alternate functions shown in Figure 1-1. |+| 10 | GND | power_in | Ground. |+| 11 | PD6 (ICP1/PCINT17) | bidirectional | Port D bit 6 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the ICP1 input capture alternate function. |+| 12 | PB0 (AIN0/PCINT0) | bidirectional | Port B bit 0 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the AIN0 analog comparator positive input alternate function. |+| 13 | PB1 (AIN1/PCINT1) | bidirectional | Port B bit 1 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the AIN1 analog comparator negative input alternate function. |+| 14 | PB2 (OC0A/PCINT2) | bidirectional | Port B bit 2 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the OC0A Timer/Counter0 output compare alternate function. |+| 15 | PB3 (OC1A/PCINT3) | bidirectional | Port B bit 3 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the OC1A Timer/Counter1 output compare alternate function. |+| 16 | PB4 (OC1B/PCINT4) | bidirectional | Port B bit 4 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the OC1B Timer/Counter1 output compare alternate function. |+| 17 | PB5 (MOSI/DI/SDA/PCINT5) | bidirectional | Port B bit 5 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the MOSI/DI/SDA alternate functions used for SPI and USI operation. |+| 18 | PB6 (MISO/DO/PCINT6) | bidirectional | Port B bit 6 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the MISO/DO alternate function. |+| 19 | PB7 (USCK/SCL/SCK/PCINT7) | bidirectional | Port B bit 7 is a bi-directional I/O pin with internal pull-up resistors, tri-stated when reset is active, and it carries the USCK/SCL/SCK alternate functions. |+| 20 | VCC | power_in | Digital supply voltage. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SOIC-20-300mil |+| Category | Global Sourcing Parts |+| Pins | 20 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage | VCC | 1.8 |  | 5.5 | V | VCC = 1.8V to 5.5V (DC characteristics header) | 198 |+| Operating temperature (industrial) | TA | -40 |  | 85 | °C | TA = -40°C to 85°C (DC characteristics header) | 198 |+| Operating temperature |  | -55 |  | 125 | °C |  | 198 |+| Storage temperature |  | -65 |  | 150 | °C |  | 198 |+| Voltage on any pin except RESET with respect to ground |  | -0.5 |  |  | V | Upper limit printed as VCC+0.5V | 198 |+| Voltage on RESET with respect to ground |  | -0.5 |  | 13 | V |  | 198 |+| Maximum operating voltage |  |  |  | 6 | V |  | 198 |+| DC current per I/O pin |  |  |  | 40 | mA |  | 198 |+| DC current VCC and GND pins |  |  |  | 200 | mA |  | 198 |+| Input low voltage (except XTAL1 and RESET) | VIL | -0.5 |  |  | V | VCC = 1.8V - 2.4V; max printed as 0.2VCC | 198 |+| Input low voltage XTAL1 pin | VIL1 | -0.5 |  |  | V | VCC = 1.8V - 5.5V; max printed as 0.1VCC | 198 |+| Input low voltage RESET pin | VIL2 | -0.5 |  |  | V | VCC = 1.8V - 5.5V; max printed as 0.2VCC | 198 |+| Input low voltage RESET pin as I/O | VIL3 | -0.5 |  |  | V | VCC = 1.8V - 2.4V; max printed as 0.2VCC | 198 |+| Output low voltage (except RESET pin) | VOL |  |  | 0.8 | V | IOL = 20 mA, VCC = 5V | 198 |+| Output low voltage (except RESET pin) | VOL |  |  | 0.6 | V | IOL = 10 mA, VCC = 3V | 198 |+| Output high voltage (except RESET pin) | VOH | 4.2 |  |  | V | IOH = -20 mA, VCC = 5V | 198 |+| Output high voltage (except RESET pin) | VOH | 2.4 |  |  | V | IOH = -10 mA, VCC = 3V | 198 |+| Input leakage current I/O pin (low) | IIL |  |  | 1 | µA | VCC = 5.5V, pin low (absolute value) | 198 |+| Input leakage current I/O pin (high) | IIH |  |  | 1 | µA | VCC = 5.5V, pin high (absolute value) | 198 |+| Reset pull-up resistor | RRST | 30 |  | 60 | kΩ |  | 198 |+| Power supply current, active mode | ICC |  | 0.2 | 0.55 | mA | Active 1MHz, VCC = 2V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, active mode | ICC |  | 1.3 | 2.5 | mA | Active 4MHz, VCC = 3V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, active mode | ICC |  | 3.9 | 7 | mA | Active 8MHz, VCC = 5V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, idle mode | ICC |  | 0.03 | 0.15 | mA | Idle 1MHz, VCC = 2V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, idle mode | ICC |  | 0.25 | 0.6 | mA | Idle 4MHz, VCC = 3V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, idle mode | ICC |  | 1 | 2 | mA | Idle 8MHz, VCC = 5V (PRR=0xFF, external clock, no I/O drive) | 199 |+| Power supply current, power-down mode | ICC |  | 4 | 10 | µA | Power-down, WDT enabled, VCC = 3V | 199 |+| Power supply current, power-down mode | ICC |  |  | 2 | µA | Power-down, WDT disabled, VCC = 3V; typ printed as < 0.15 µA | 199 |+| Clock frequency (external clock drive) | 1/tCLCL | 0 |  | 4 | MHz | VCC = 1.8 - 5.5V | 201 |+| Clock frequency (external clock drive) | 1/tCLCL | 0 |  | 10 | MHz | VCC = 2.7 - 5.5V | 201 |+| Clock frequency (external clock drive) | 1/tCLCL | 0 |  | 20 | MHz | VCC = 4.5 - 5.5V | 201 |+| Minimum pulse width on RESET pin | tRST | 2.5 |  |  | µs | VCC = 1.8 - 5.5V (when RESET used as reset) | 201 |+| Min pulse width on brown-out reset | tBOD | 2 |  |  | µs |  | 201 |+| Brown-out detection threshold (BODLEVEL 10) | VBOT | 1.7 | 1.8 | 2 | V | BODLEVEL[1:0] = 10 | 202 |+| Brown-out detection threshold (BODLEVEL 01) | VBOT | 2.5 | 2.7 | 2.9 | V | BODLEVEL[1:0] = 01 | 202 |+| Brown-out detection threshold (BODLEVEL 00) | VBOT | 4.1 | 4.3 | 4.5 | V | BODLEVEL[1:0] = 00 | 202 |+| Release threshold of power-on reset | VPOR | 1.1 | 1.4 | 1.6 | V | TA = -40 - 85°C | 202 |+| Activation threshold of power-on reset | VPOA | 0.6 | 1.3 | 1.6 | V | TA = -40 - 85°C | 202 |+| Analog comparator input offset voltage | VACIO |  |  | 40 | mV | VCC = 5V, VIN = VCC/2; typ printed as < 10 mV | 202 |+| Analog comparator input leakage current | IACLK | -50 |  | 50 | nA | VCC = 5V, VIN = VCC/2 | 202 |+| Digital propagation delay | tDPD |  | 1 | 2 | CLK | VCC = 1.8V - 5.5V | 202 |+| Factory calibration accuracy of internal RC oscillator |  | -10 |  | 10 | % | Factory calibration 4.0/8.0 MHz at VCC = 3V, 25°C | 200 |+| User calibration accuracy of internal RC oscillator |  | -2 |  | 2 | % | Fixed frequency 3.1-4.7 / 7.3-9.1 MHz, fixed VCC 1.8-5.5V, fixed temperature -40-85°C | 200 |+| Internal bandgap reference voltage | VBG | 1 | 1.1 | 1.2 | V | VCC = 2.7V, TA = 25°C | 201 |+| Internal bandgap reference start-up time | tBG |  | 40 | 70 | µs | VCC = 2.7V, TA = 25°C | 201 |+| Programming enable voltage (parallel programming) | VPP | 11.5 |  | 12.5 | V | Parallel programming, VCC = 5V ± 10% | 203 |+| Oscillator frequency (serial programming) | 1/tCLCL | 0 |  | 4 | MHz | TA = -40°C to 85°C, VCC = 1.8 - 5.5V | 205 |+| Oscillator frequency (serial programming) | 1/tCLCL | 0 |  | 20 | MHz | VCC = 4.5 - 5.5V | 205 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts |  | tin |, H: NiPdAu lead finish, U or N: matte tin | 259 |++## CAD (KiCad official)++- Symbol: `ATTINY4313-SU`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `attiny4313-su-etched.step` / `attiny4313-su-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `attiny4313-su.step` / `attiny4313-su.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882158479937536) (274 pp, sha256 `2c4b584c9b0bc5cb`, retrieved 2026-10-20, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/attiny4313-su-datasheet.pdf)

@@ -0,0 +1,524 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "ATTINY4313-SU",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 12.03,+      "dash_mm": 0.3008,+      "gap_mm": 0.1804,+      "pad_stroke_mm": 0.0722+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.962,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.15,+      5.15,+      -5.92,+      5.92+    ],+    "pads_bbox_mm": [+      -5.675,+      5.675,+      -6.015,+      6.015+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "attiny4313-su-etched.glb",+    "glb_sha256": "776f1e3b9264df0f2a43a6ee30a1a03375f3e5d3f39b5432a290f951026b85f4",+    "footprint": "attiny4313-su.kicad_mod",+    "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",+    "pins": "page.json component.pins",+    "pins_sha256": "3f0e52946dcd2217f062df5994bd49c73336d7e2686dd956384dbce3c30f8612"+  },+  "generator": "adom-wiki 1.7.75 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "PA2 (RESET/dW/PCINT10)",+      "x": -5.825,+      "y": -5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "PD0 (RXD/PCINT11)",+      "x": -5.825,+      "y": -4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "PD1 (TXD/PCINT12)",+      "x": -5.825,+      "y": -3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "PA1/XTAL2/PCINT9",+      "x": -5.825,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "PA0 (XTAL1/CLKI/PCINT8)",+      "x": -5.825,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "PD2 (INT0/XCK/CKOUT/PCINT13)",+      "x": -5.825,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "PD3 (INT1/PCINT14)",+      "x": -5.825,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "PD4/T0/PCINT15",+      "x": -5.825,+      "y": 3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "PD5 (T1/OC0B/PCINT16)",+      "x": -5.825,+      "y": 4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "GND",+      "x": -5.825,+      "y": 5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "PD6 (ICP1/PCINT17)",+      "x": 5.825,+      "y": 5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "PB0 (AIN0/PCINT0)",+      "x": 5.825,+      "y": 4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "PB1 (AIN1/PCINT1)",+      "x": 5.825,+      "y": 3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "PB2 (OC0A/PCINT2)",+      "x": 5.825,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "PB3 (OC1A/PCINT3)",+      "x": 5.825,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "PB4 (OC1B/PCINT4)",+      "x": 5.825,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "17",+      "text": "PB5 (MOSI/DI/SDA/PCINT5)",+      "x": 5.825,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "18",+      "text": "PB6 (MISO/DO/PCINT6)",+      "x": 5.825,+      "y": -3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "19",+      "text": "PB7 (USCK/SCL/SCK/PCINT7)",+      "x": 5.825,+      "y": -4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "20",+      "text": "VCC",+      "x": 5.825,+      "y": -5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,372 @@+(footprint "SOIC-20W_7.5x12.8mm_P1.27mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf)")+	(tags "SOIC SO")+	(property "Reference" "REF**"+		(at 0 -7.35 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "SOIC-20W_7.5x12.8mm_P1.27mm"+		(at 0 7.35 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -3.86 -6.51)+		(end 3.86 -6.51)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.86 -6.275)+		(end -3.86 -6.51)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.86 6.51)+		(end -3.86 6.275)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.86 -6.51)+		(end 3.86 -6.275)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.86 6.275)+		(end 3.86 6.51)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.86 6.51)+		(end -3.86 6.51)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -4.65 -6.28)+			(xy -4.99 -6.75)+			(xy -4.31 -6.75)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_line+		(start -5.93 -6.27)+		(end -4 -6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -5.93 6.27)+		(end -5.93 -6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -4 -6.65)+		(end 4 -6.65)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -4 -6.27)+		(end -4 -6.65)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -4 6.27)+		(end -5.93 6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -4 6.65)+		(end -4 6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 4 -6.65)+		(end 4 -6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 4 -6.27)+		(end 5.93 -6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 4 6.27)+		(end 4 6.65)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 4 6.65)+		(end -4 6.65)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.93 -6.27)+		(end 5.93 6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.93 6.27)+		(end 4 6.27)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_poly+		(pts+			(xy -2.75 -6.4)+			(xy 3.75 -6.4)+			(xy 3.75 6.4)+			(xy -3.75 6.4)+			(xy -3.75 -5.4)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -4.65 -5.715)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -4.65 -4.445)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -4.65 -3.175)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -4.65 -1.905)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -4.65 -0.635)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -4.65 0.635)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -4.65 1.905)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -4.65 3.175)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -4.65 4.445)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -4.65 5.715)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at 4.65 5.715)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at 4.65 4.445)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 4.65 3.175)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 4.65 1.905)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 4.65 0.635)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 4.65 -0.635)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 4.65 -1.905)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 4.65 -3.175)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 4.65 -4.445)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 4.65 -5.715)+		(size 2.05 0.6)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-20W_7.5x12.8mm_P1.27mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)

@@ -0,0 +1,93 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "ATTINY4313-SU" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+    (property "Value" "ATTINY4313-SU" (at 0 -17.78 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "ATTINY4313-SU_0_1"+    (rectangle (start -12.70 12.70) (end 12.70 -15.24)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "ATTINY4313-SU_1_1"+    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+      (name "PA2 (RESET/dW/PCINT10)" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+      (name "PD0 (RXD/PCINT11)" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+      (name "PD1 (TXD/PCINT12)" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+      (name "PA1/XTAL2/PCINT9" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+      (name "PA0 (XTAL1/CLKI/PCINT8)" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+      (name "PD2 (INT0/XCK/CKOUT/PCINT13)" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+      (name "PD3 (INT1/PCINT14)" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "PD4/T0/PCINT15" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+      (name "PD5 (T1/OC0B/PCINT16)" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -12.70 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 10.16 180) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+      (name "PB7 (USCK/SCL/SCK/PCINT7)" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "PB6 (MISO/DO/PCINT6)" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "PB5 (MOSI/DI/SDA/PCINT5)" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+      (name "PB4 (OC1B/PCINT4)" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "PB3 (OC1A/PCINT3)" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "PB2 (OC0A/PCINT2)" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "PB1 (AIN1/PCINT1)" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "PB0 (AIN0/PCINT0)" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+      (name "PD6 (ICP1/PCINT17)" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,166 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="SOIC-20W_7.5x12.8mm_P1.27mm">+  <description>SOIC-20W, 7.5 x 12.8 mm, 1.27 mm pitch. SOIC, 20 Pin</description>+  <smd name="1" x="-4.6500" y="5.7150" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="2" x="-4.6500" y="4.4450" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="3" x="-4.6500" y="3.1750" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="4" x="-4.6500" y="1.9050" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="5" x="-4.6500" y="0.6350" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="6" x="-4.6500" y="-0.6350" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="7" x="-4.6500" y="-1.9050" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="8" x="-4.6500" y="-3.1750" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="9" x="-4.6500" y="-4.4450" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="10" x="-4.6500" y="-5.7150" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="11" x="4.6500" y="-5.7150" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="12" x="4.6500" y="-4.4450" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="13" x="4.6500" y="-3.1750" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="14" x="4.6500" y="-1.9050" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="15" x="4.6500" y="-0.6350" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="16" x="4.6500" y="0.6350" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="17" x="4.6500" y="1.9050" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="18" x="4.6500" y="3.1750" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="19" x="4.6500" y="4.4450" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <smd name="20" x="4.6500" y="5.7150" dx="2.0500" dy="0.6000" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-4.6500" y="6.2800"/>+    <vertex x="-4.9900" y="6.7500"/>+    <vertex x="-4.3100" y="6.7500"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-2.7500" y="6.4000"/>+    <vertex x="3.7500" y="6.4000"/>+    <vertex x="3.7500" y="-6.4000"/>+    <vertex x="-3.7500" y="-6.4000"/>+    <vertex x="-3.7500" y="5.4000"/>+  </polygon>+  <wire x1="-3.8600" y1="6.5100" x2="3.8600" y2="6.5100" width="0.1200" layer="21"/>+  <wire x1="-3.8600" y1="6.2750" x2="-3.8600" y2="6.5100" width="0.1200" layer="21"/>+  <wire x1="-3.8600" y1="-6.5100" x2="-3.8600" y2="-6.2750" width="0.1200" layer="21"/>+  <wire x1="3.8600" y1="6.5100" x2="3.8600" y2="6.2750" width="0.1200" layer="21"/>+  <wire x1="3.8600" y1="-6.2750" x2="3.8600" y2="-6.5100" width="0.1200" layer="21"/>+  <wire x1="3.8600" y1="-6.5100" x2="-3.8600" y2="-6.5100" width="0.1200" layer="21"/>+  <text x="0" y="7.340" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-7.340" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="ATTINY4313-SU">+  <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+  <wire x1="12.7" y1="12.7" x2="12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+  <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="PA2_RESET/dW/PCINT10" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="PD0_RXD/PCINT11" x="-17.78" y="7.62" length="middle" direction="io"/>+  <pin name="PD1_TXD/PCINT12" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="PA1/XTAL2/PCINT9" x="-17.78" y="2.54" length="middle" direction="io"/>+  <pin name="PA0_XTAL1/CLKI/PCINT8" x="-17.78" y="0" length="middle" direction="io"/>+  <pin name="PD2_INT0/XCK/CKOUT/PCINT13" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="PD3_INT1/PCINT14" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="PD4/T0/PCINT15" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="PD5_T1/OC0B/PCINT16" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="GND" x="-17.78" y="-12.7" length="middle" direction="pwr"/>+  <pin name="VCC" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>+  <pin name="PB7_USCK/SCL/SCK/PCINT7" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PB6_MISO/DO/PCINT6" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PB5_MOSI/DI/SDA/PCINT5" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PB4_OC1B/PCINT4" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="PB3_OC1A/PCINT3" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PB2_OC0A/PCINT2" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PB1_AIN1/PCINT1" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PB0_AIN0/PCINT0" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="PD6_ICP1/PCINT17" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="ATTINY4313-SU" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="ATTINY4313-SU" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="SOIC-20W_7.5x12.8mm_P1.27mm">+      <connects>+        <connect gate="G$1" pin="PA2_RESET/dW/PCINT10" pad="1"/>+        <connect gate="G$1" pin="PD0_RXD/PCINT11" pad="2"/>+        <connect gate="G$1" pin="PD1_TXD/PCINT12" pad="3"/>+        <connect gate="G$1" pin="PA1/XTAL2/PCINT9" pad="4"/>+        <connect gate="G$1" pin="PA0_XTAL1/CLKI/PCINT8" pad="5"/>+        <connect gate="G$1" pin="PD2_INT0/XCK/CKOUT/PCINT13" pad="6"/>+        <connect gate="G$1" pin="PD3_INT1/PCINT14" pad="7"/>+        <connect gate="G$1" pin="PD4/T0/PCINT15" pad="8"/>+        <connect gate="G$1" pin="PD5_T1/OC0B/PCINT16" pad="9"/>+        <connect gate="G$1" pin="GND" pad="10"/>+        <connect gate="G$1" pin="VCC" pad="20"/>+        <connect gate="G$1" pin="PB7_USCK/SCL/SCK/PCINT7" pad="19"/>+        <connect gate="G$1" pin="PB6_MISO/DO/PCINT6" pad="18"/>+        <connect gate="G$1" pin="PB5_MOSI/DI/SDA/PCINT5" pad="17"/>+        <connect gate="G$1" pin="PB4_OC1B/PCINT4" pad="16"/>+        <connect gate="G$1" pin="PB3_OC1A/PCINT3" pad="15"/>+        <connect gate="G$1" pin="PB2_OC0A/PCINT2" pad="14"/>+        <connect gate="G$1" pin="PB1_AIN1/PCINT1" pad="13"/>+        <connect gate="G$1" pin="PB0_AIN0/PCINT0" pad="12"/>+        <connect gate="G$1" pin="PD6_ICP1/PCINT17" pad="11"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,6626 @@+ISO-10303-21;+HEADER;+/* SOIC-20W_7.5x12.8mm_P1.27mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of SOIC-20W_7.5x12.8mm_P1.27mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'SOIC-20W_7.5x12.8mm_P1.27mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('SOIC-20W_7.5x12.8mm_P1.27mm','SOIC-20W_7.5x12.8mm_P1.27mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#6222);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#96,#109,#128,#141,#234,#327,#340,#353,#362,#377,#441,#452,#471,#496,#514,#535,#553,#574,#592,#613,#631,#652,#670,#691,#709,#730,#748,#769,#787,#808,#826,#847,#857,#869,#890,#908,#929,#947,#968,#986,#1007,#1025,#1046,#1064,#1085,#1103,#1124,#1142,#1163,#1181,#1202,#1220,#1241,#1258,#1273,#1288,#1299,#1323,#1417,#1431,#1445,#1459,#1553,#1573,#1604,#1675,#1693,#1746,#1757,#1817,#1834,#1887,#1898,#1958,#1975,#2028,#2039,#2099,#2116,#2169,#2180,#2240,#2257,#2310,#2321,#2381,#2398,#2451,#2462,#2522,#2539,#2592,#2603,#2663,#2680,#2733,#2744,#2804,#2821,#2874,#2882,#2940,#2957,#3005,#3071,#3087,#3135,#3145,#3205,#3221,#3274,#3285,#3345,#3361,#3414,#3425,#3485,#3501,#3554,#3565,#3625,#3641,#3694,#3705,#3765,#3781,#3834,#3845,#3905,#3921,#3974,#3985,#4045,#4061,#4114,#4125,#4185,#4201,#4254,#4265,#4325,#4341,#4392,#4402,#4414,#4426,#4438,#4450,#4462,#4474,#4486,#4498,#4510,#4539,#4548,#4560,#4572,#4584,#4596,#4608,#4620,#4632,#4644,#4656,#4665,#4675,#4682,#4692,#4703,#4713,#4723,#4733,#4743,#4753,#4762,#4772,#4782,#4792,#4802,#4812,#4822,#4832,#4840,#4850,#4860,#4870,#4880,#4890,#4900,#4910,#4918,#4928,#4938,#4948,#4958,#4968,#4978,#4988,#4996,#5006,#5016,#5026,#5036,#5046,#5056,#5066,#5074,#5084,#5094,#5104,#5114,#5124,#5134,#5144,#5152,#5162,#5172,#5182,#5192,#5202,#5212,#5222,#5230,#5240,#5250,#5260,#5270,#5280,#5290,#5300,#5308,#5318,#5328,#5338,#5348,#5358,#5368,#5378,#5386,#5396,#5406,#5416,#5426,#5436,#5446,#5454,#5465,#5474,#5484,#5494,#5504,#5514,#5523,#5533,#5543,#5552,#5562,#5572,#5582,#5592,#5600,#5610,#5620,#5629,#5639,#5649,#5659,#5669,#5677,#5687,#5697,#5706,#5716,#5726,#5736,#5746,#5754,#5764,#5774,#5783,#5793,#5803,#5813,#5823,#5831,#5841,#5851,#5860,#5870,#5880,#5890,#5900,#5908,#5918,#5928,#5937,#5947,#5957,#5967,#5977,#5985,#5995,#6005,#6014,#6024,#6034,#6044,#6054,#6062,#6072,#6082,#6091,#6101,#6111,#6121,#6131,#6139,#6149,#6159,#6168,#6178,#6188,#6198,#6208,#6216));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-3.481949141309,6.213898282619,0.2));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(3.481949141309,6.213898282619,0.2));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(3.575,6.4,1.375));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-3.575,6.4,1.375));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.F.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(3.563898282619,6.131949141309,0.2));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(3.563898282619,-6.131949141309,0.2));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(3.481949141309,-6.213898282619,0.2));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-3.481949141309,-6.213898282619,0.2));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-3.563898282619,-6.131949141309,0.2));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-3.563898282619,6.131949141309,0.2));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#13,#95);+#95=DIRECTION('',(0.488834854248,-0.872376343829,0.));+#96=ADVANCED_FACE('',(#97),#108,.F.);+#97=FACE_BOUND('',#98,.F.);+#98=EDGE_LOOP('',(#46,#99,#104,#107));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#48,#101,#103,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(3.75,6.225,1.375));+#103=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#102),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#104=ORIENTED_EDGE('',*,*,#105,.F.);+#105=EDGE_CURVE('',#31,#101,#106,.T.);+#106=LINE('',#32,#51);+#107=ORIENTED_EDGE('',*,*,#30,.F.);+#108=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#102)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#109=ADVANCED_FACE('',(#110),#126,.F.);+#110=FACE_BOUND('',#111,.F.);+#111=EDGE_LOOP('',(#112,#113,#118,#123));+#112=ORIENTED_EDGE('',*,*,#35,.T.);+#113=ORIENTED_EDGE('',*,*,#114,.T.);+#114=EDGE_CURVE('',#31,#115,#117,.T.);+#115=VERTEX_POINT('',#116);+#116=CARTESIAN_POINT('',(3.575,6.4,1.575));+#117=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#116),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#118=ORIENTED_EDGE('',*,*,#119,.F.);+#119=EDGE_CURVE('',#120,#115,#122,.T.);+#120=VERTEX_POINT('',#121);+#121=CARTESIAN_POINT('',(-3.575,6.4,1.575));+#122=LINE('',#121,#27);+#123=ORIENTED_EDGE('',*,*,#124,.F.);+#124=EDGE_CURVE('',#36,#120,#125,.T.);+#125=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#121),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#126=PLANE('',#127);+#127=AXIS2_PLACEMENT_3D('',#121,#59,#28);+#128=ADVANCED_FACE('',(#129),#140,.F.);+#129=FACE_BOUND('',#130,.F.);+#130=EDGE_LOOP('',(#88,#131,#132,#137));+#131=ORIENTED_EDGE('',*,*,#40,.T.);+#132=ORIENTED_EDGE('',*,*,#133,.F.);+#133=EDGE_CURVE('',#134,#36,#136,.T.);+#134=VERTEX_POINT('',#135);+#135=CARTESIAN_POINT('',(-3.75,6.225,1.375));+#136=LINE('',#135,#91);+#137=ORIENTED_EDGE('',*,*,#138,.F.);+#138=EDGE_CURVE('',#83,#134,#139,.T.);+#139=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#135),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#140=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#135),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=ADVANCED_FACE('',(#142),#233,.F.);+#142=FACE_BOUND('',#143,.F.);+#143=EDGE_LOOP('',(#81,#144,#145,#151,#155,#159,#163,#167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215,#219,#223,#227,#230));+#144=ORIENTED_EDGE('',*,*,#138,.T.);+#145=ORIENTED_EDGE('',*,*,#146,.F.);+#146=EDGE_CURVE('',#147,#134,#149,.T.);+#147=VERTEX_POINT('',#148);+#148=CARTESIAN_POINT('',(-3.75,5.92,1.375));+#149=LINE('',#150,#86);+#150=CARTESIAN_POINT('',(-3.75,-6.225,1.375));+#151=ORIENTED_EDGE('',*,*,#152,.F.);+#152=EDGE_CURVE('',#153,#147,#149,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(-3.75,5.51,1.375));+#155=ORIENTED_EDGE('',*,*,#156,.F.);+#156=EDGE_CURVE('',#157,#153,#149,.T.);+#157=VERTEX_POINT('',#158);+#158=CARTESIAN_POINT('',(-3.75,4.65,1.375));+#159=ORIENTED_EDGE('',*,*,#160,.F.);+#160=EDGE_CURVE('',#161,#157,#149,.T.);+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(-3.75,4.24,1.375));+#163=ORIENTED_EDGE('',*,*,#164,.F.);+#164=EDGE_CURVE('',#165,#161,#149,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(-3.75,3.38,1.375));+#167=ORIENTED_EDGE('',*,*,#168,.F.);+#168=EDGE_CURVE('',#169,#165,#149,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-3.75,2.97,1.375));+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#169,#149,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-3.75,2.11,1.375));+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#177,#173,#149,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(-3.75,1.7,1.375));+#179=ORIENTED_EDGE('',*,*,#180,.F.);+#180=EDGE_CURVE('',#181,#177,#149,.T.);+#181=VERTEX_POINT('',#182);+#182=CARTESIAN_POINT('',(-3.75,0.84,1.375));+#183=ORIENTED_EDGE('',*,*,#184,.F.);+#184=EDGE_CURVE('',#185,#181,#149,.T.);+#185=VERTEX_POINT('',#186);+#186=CARTESIAN_POINT('',(-3.75,0.43,1.375));+#187=ORIENTED_EDGE('',*,*,#188,.F.);+#188=EDGE_CURVE('',#189,#185,#149,.T.);+#189=VERTEX_POINT('',#190);+#190=CARTESIAN_POINT('',(-3.75,-0.43,1.375));+#191=ORIENTED_EDGE('',*,*,#192,.F.);+#192=EDGE_CURVE('',#193,#189,#149,.T.);+#193=VERTEX_POINT('',#194);+#194=CARTESIAN_POINT('',(-3.75,-0.84,1.375));+#195=ORIENTED_EDGE('',*,*,#196,.F.);+#196=EDGE_CURVE('',#197,#193,#149,.T.);+#197=VERTEX_POINT('',#198);+#198=CARTESIAN_POINT('',(-3.75,-1.7,1.375));+#199=ORIENTED_EDGE('',*,*,#200,.F.);+#200=EDGE_CURVE('',#201,#197,#149,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(-3.75,-2.11,1.375));+#203=ORIENTED_EDGE('',*,*,#204,.F.);+#204=EDGE_CURVE('',#205,#201,#149,.T.);+#205=VERTEX_POINT('',#206);+#206=CARTESIAN_POINT('',(-3.75,-2.97,1.375));+#207=ORIENTED_EDGE('',*,*,#208,.F.);+#208=EDGE_CURVE('',#209,#205,#149,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(-3.75,-3.38,1.375));+#211=ORIENTED_EDGE('',*,*,#212,.F.);+#212=EDGE_CURVE('',#213,#209,#149,.T.);+#213=VERTEX_POINT('',#214);+#214=CARTESIAN_POINT('',(-3.75,-4.24,1.375));+#215=ORIENTED_EDGE('',*,*,#216,.F.);+#216=EDGE_CURVE('',#217,#213,#149,.T.);+#217=VERTEX_POINT('',#218);+#218=CARTESIAN_POINT('',(-3.75,-4.65,1.375));+#219=ORIENTED_EDGE('',*,*,#220,.F.);+#220=EDGE_CURVE('',#221,#217,#149,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(-3.75,-5.51,1.375));+#223=ORIENTED_EDGE('',*,*,#224,.F.);+#224=EDGE_CURVE('',#225,#221,#149,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(-3.75,-5.92,1.375));+#227=ORIENTED_EDGE('',*,*,#228,.F.);+#228=EDGE_CURVE('',#229,#225,#149,.T.);+#229=VERTEX_POINT('',#150);+#230=ORIENTED_EDGE('',*,*,#231,.F.);+#231=EDGE_CURVE('',#76,#229,#232,.T.);+#232=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#150),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#233=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#150),(#84,#135)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,12.45),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#234=ADVANCED_FACE('',(#235),#326,.F.);+#235=FACE_BOUND('',#236,.F.);+#236=EDGE_LOOP('',(#53,#237,#242,#247,#251,#255,#259,#263,#267,#271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319,#323,#325));+#237=ORIENTED_EDGE('',*,*,#238,.T.);+#238=EDGE_CURVE('',#55,#239,#241,.T.);+#239=VERTEX_POINT('',#240);+#240=CARTESIAN_POINT('',(3.75,-6.225,1.375));+#241=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#240),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#242=ORIENTED_EDGE('',*,*,#243,.F.);+#243=EDGE_CURVE('',#244,#239,#246,.T.);+#244=VERTEX_POINT('',#245);+#245=CARTESIAN_POINT('',(3.75,-5.92,1.375));+#246=LINE('',#102,#58);+#247=ORIENTED_EDGE('',*,*,#248,.F.);+#248=EDGE_CURVE('',#249,#244,#246,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(3.75,-5.51,1.375));+#251=ORIENTED_EDGE('',*,*,#252,.F.);+#252=EDGE_CURVE('',#253,#249,#246,.T.);+#253=VERTEX_POINT('',#254);+#254=CARTESIAN_POINT('',(3.75,-4.65,1.375));+#255=ORIENTED_EDGE('',*,*,#256,.F.);+#256=EDGE_CURVE('',#257,#253,#246,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(3.75,-4.24,1.375));+#259=ORIENTED_EDGE('',*,*,#260,.F.);+#260=EDGE_CURVE('',#261,#257,#246,.T.);+#261=VERTEX_POINT('',#262);+#262=CARTESIAN_POINT('',(3.75,-3.38,1.375));+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#261,#246,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(3.75,-2.97,1.375));+#267=ORIENTED_EDGE('',*,*,#268,.F.);+#268=EDGE_CURVE('',#269,#265,#246,.T.);+#269=VERTEX_POINT('',#270);+#270=CARTESIAN_POINT('',(3.75,-2.11,1.375));+#271=ORIENTED_EDGE('',*,*,#272,.F.);+#272=EDGE_CURVE('',#273,#269,#246,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(3.75,-1.7,1.375));+#275=ORIENTED_EDGE('',*,*,#276,.F.);+#276=EDGE_CURVE('',#277,#273,#246,.T.);+#277=VERTEX_POINT('',#278);+#278=CARTESIAN_POINT('',(3.75,-0.84,1.375));+#279=ORIENTED_EDGE('',*,*,#280,.F.);+#280=EDGE_CURVE('',#281,#277,#246,.T.);+#281=VERTEX_POINT('',#282);+#282=CARTESIAN_POINT('',(3.75,-0.43,1.375));+#283=ORIENTED_EDGE('',*,*,#284,.F.);+#284=EDGE_CURVE('',#285,#281,#246,.T.);+#285=VERTEX_POINT('',#286);+#286=CARTESIAN_POINT('',(3.75,0.43,1.375));+#287=ORIENTED_EDGE('',*,*,#288,.F.);+#288=EDGE_CURVE('',#289,#285,#246,.T.);+#289=VERTEX_POINT('',#290);+#290=CARTESIAN_POINT('',(3.75,0.84,1.375));+#291=ORIENTED_EDGE('',*,*,#292,.F.);+#292=EDGE_CURVE('',#293,#289,#246,.T.);+#293=VERTEX_POINT('',#294);+#294=CARTESIAN_POINT('',(3.75,1.7,1.375));+#295=ORIENTED_EDGE('',*,*,#296,.F.);+#296=EDGE_CURVE('',#297,#293,#246,.T.);+#297=VERTEX_POINT('',#298);+#298=CARTESIAN_POINT('',(3.75,2.11,1.375));+#299=ORIENTED_EDGE('',*,*,#300,.F.);+#300=EDGE_CURVE('',#301,#297,#246,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(3.75,2.97,1.375));+#303=ORIENTED_EDGE('',*,*,#304,.F.);+#304=EDGE_CURVE('',#305,#301,#246,.T.);+#305=VERTEX_POINT('',#306);+#306=CARTESIAN_POINT('',(3.75,3.38,1.375));+#307=ORIENTED_EDGE('',*,*,#308,.F.);+#308=EDGE_CURVE('',#309,#305,#246,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(3.75,4.24,1.375));+#311=ORIENTED_EDGE('',*,*,#312,.F.);+#312=EDGE_CURVE('',#313,#309,#246,.T.);+#313=VERTEX_POINT('',#314);+#314=CARTESIAN_POINT('',(3.75,4.65,1.375));+#315=ORIENTED_EDGE('',*,*,#316,.F.);+#316=EDGE_CURVE('',#317,#313,#246,.T.);+#317=VERTEX_POINT('',#318);+#318=CARTESIAN_POINT('',(3.75,5.51,1.375));+#319=ORIENTED_EDGE('',*,*,#320,.F.);+#320=EDGE_CURVE('',#321,#317,#246,.T.);+#321=VERTEX_POINT('',#322);+#322=CARTESIAN_POINT('',(3.75,5.92,1.375));+#323=ORIENTED_EDGE('',*,*,#324,.F.);+#324=EDGE_CURVE('',#101,#321,#246,.T.);+#325=ORIENTED_EDGE('',*,*,#100,.F.);+#326=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#102),(#56,#240)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,12.45),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#327=ADVANCED_FACE('',(#328),#339,.F.);+#328=FACE_BOUND('',#329,.F.);+#329=EDGE_LOOP('',(#74,#330,#331,#336));+#330=ORIENTED_EDGE('',*,*,#231,.T.);+#331=ORIENTED_EDGE('',*,*,#332,.F.);+#332=EDGE_CURVE('',#333,#229,#335,.T.);+#333=VERTEX_POINT('',#334);+#334=CARTESIAN_POINT('',(-3.575,-6.4,1.375));+#335=LINE('',#334,#79);+#336=ORIENTED_EDGE('',*,*,#337,.F.);+#337=EDGE_CURVE('',#69,#333,#338,.T.);+#338=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#334),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#339=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#334),(#77,#150)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#340=ADVANCED_FACE('',(#341),#352,.F.);+#341=FACE_BOUND('',#342,.F.);+#342=EDGE_LOOP('',(#60,#343,#348,#351));+#343=ORIENTED_EDGE('',*,*,#344,.T.);+#344=EDGE_CURVE('',#62,#345,#347,.T.);+#345=VERTEX_POINT('',#346);+#346=CARTESIAN_POINT('',(3.575,-6.4,1.375));+#347=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#346),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#348=ORIENTED_EDGE('',*,*,#349,.F.);+#349=EDGE_CURVE('',#239,#345,#350,.T.);+#350=LINE('',#240,#65);+#351=ORIENTED_EDGE('',*,*,#238,.F.);+#352=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#240),(#63,#346)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#353=ADVANCED_FACE('',(#354),#361,.F.);+#354=FACE_BOUND('',#355,.F.);+#355=EDGE_LOOP('',(#67,#356,#357,#360));+#356=ORIENTED_EDGE('',*,*,#337,.T.);+#357=ORIENTED_EDGE('',*,*,#358,.F.);+#358=EDGE_CURVE('',#345,#333,#359,.T.);+#359=LINE('',#346,#72);+#360=ORIENTED_EDGE('',*,*,#344,.F.);+#361=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#346),(#70,#334)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#362=ADVANCED_FACE('',(#363),#375,.F.);+#363=FACE_BOUND('',#364,.F.);+#364=EDGE_LOOP('',(#365,#366,#371,#374));+#365=ORIENTED_EDGE('',*,*,#105,.T.);+#366=ORIENTED_EDGE('',*,*,#367,.T.);+#367=EDGE_CURVE('',#101,#368,#370,.T.);+#368=VERTEX_POINT('',#369);+#369=CARTESIAN_POINT('',(3.75,6.225,1.575));+#370=B_SPLINE_CURVE_WITH_KNOTS('',1,(#102,#369),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#371=ORIENTED_EDGE('',*,*,#372,.F.);+#372=EDGE_CURVE('',#115,#368,#373,.T.);+#373=LINE('',#116,#51);+#374=ORIENTED_EDGE('',*,*,#114,.F.);+#375=PLANE('',#376);+#376=AXIS2_PLACEMENT_3D('',#116,#66,#52);+#377=ADVANCED_FACE('',(#378),#436,.F.);+#378=FACE_BOUND('',#379,.F.);+#379=EDGE_LOOP('',(#380,#385,#386,#387,#392,#398,#403,#408,#413,#418,#424,#432));+#380=ORIENTED_EDGE('',*,*,#381,.T.);+#381=EDGE_CURVE('',#382,#120,#384,.T.);+#382=VERTEX_POINT('',#383);+#383=CARTESIAN_POINT('',(-3.75,6.225,1.575));+#384=LINE('',#383,#91);+#385=ORIENTED_EDGE('',*,*,#119,.T.);+#386=ORIENTED_EDGE('',*,*,#372,.T.);+#387=ORIENTED_EDGE('',*,*,#388,.T.);+#388=EDGE_CURVE('',#368,#389,#391,.T.);+#389=VERTEX_POINT('',#390);+#390=CARTESIAN_POINT('',(3.75,5.92,1.575));+#391=LINE('',#369,#58);+#392=ORIENTED_EDGE('',*,*,#393,.T.);+#393=EDGE_CURVE('',#389,#394,#396,.T.);+#394=VERTEX_POINT('',#395);+#395=CARTESIAN_POINT('',(3.675,5.92,1.575));+#396=LINE('',#397,#72);+#397=CARTESIAN_POINT('',(4.,5.92,1.575));+#398=ORIENTED_EDGE('',*,*,#399,.F.);+#399=EDGE_CURVE('',#400,#394,#402,.T.);+#400=VERTEX_POINT('',#401);+#401=CARTESIAN_POINT('',(3.675,6.1875,1.575));+#402=LINE('',#401,#58);+#403=ORIENTED_EDGE('',*,*,#404,.F.);+#404=EDGE_CURVE('',#405,#400,#407,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(3.5375,6.325,1.575));+#407=LINE('',#406,#51);+#408=ORIENTED_EDGE('',*,*,#409,.F.);+#409=EDGE_CURVE('',#410,#405,#412,.T.);+#410=VERTEX_POINT('',#411);+#411=CARTESIAN_POINT('',(-3.5375,6.325,1.575));+#412=LINE('',#411,#27);+#413=ORIENTED_EDGE('',*,*,#414,.F.);+#414=EDGE_CURVE('',#415,#410,#417,.T.);+#415=VERTEX_POINT('',#416);+#416=CARTESIAN_POINT('',(-3.675,6.1875,1.575));+#417=LINE('',#416,#91);+#418=ORIENTED_EDGE('',*,*,#419,.F.);+#419=EDGE_CURVE('',#420,#415,#422,.T.);+#420=VERTEX_POINT('',#421);+#421=CARTESIAN_POINT('',(-3.675,5.92,1.575));+#422=LINE('',#423,#86);+#423=CARTESIAN_POINT('',(-3.675,-6.1875,1.575));+#424=ORIENTED_EDGE('',*,*,#425,.F.);+#425=EDGE_CURVE('',#426,#420,#428,.T.);+#426=VERTEX_POINT('',#427);+#427=CARTESIAN_POINT('',(-3.75,5.92,1.575));+#428=LINE('',#429,#430);+#429=CARTESIAN_POINT('',(-4.,5.92,1.575));+#430=VECTOR('',#431,1.);+#431=DIRECTION('',(1.,-1.144237745222E-17,0.));+#432=ORIENTED_EDGE('',*,*,#433,.T.);+#433=EDGE_CURVE('',#426,#382,#434,.T.);+#434=LINE('',#435,#86);+#435=CARTESIAN_POINT('',(-3.75,-6.225,1.575));+#436=PLANE('',#437);+#437=AXIS2_PLACEMENT_3D('',#438,#439,#440);+#438=CARTESIAN_POINT('',(-5.375520964996E-16,6.3625,1.575));+#439=DIRECTION('',(1.366065554584E-31,-2.23112175214E-27,-1.));+#440=DIRECTION('',(1.,9.456076487146E-17,1.366065554581E-31));+#441=ADVANCED_FACE('',(#442),#450,.F.);+#442=FACE_BOUND('',#443,.F.);+#443=EDGE_LOOP('',(#444,#445,#446,#447));+#444=ORIENTED_EDGE('',*,*,#133,.T.);+#445=ORIENTED_EDGE('',*,*,#124,.T.);+#446=ORIENTED_EDGE('',*,*,#381,.F.);+#447=ORIENTED_EDGE('',*,*,#448,.F.);+#448=EDGE_CURVE('',#134,#382,#449,.T.);+#449=B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#383),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#450=PLANE('',#451);+#451=AXIS2_PLACEMENT_3D('',#383,#52,#92);+#452=ADVANCED_FACE('',(#453),#469,.F.);+#453=FACE_BOUND('',#454,.F.);+#454=EDGE_LOOP('',(#455,#459,#460,#467));+#455=ORIENTED_EDGE('',*,*,#456,.F.);+#456=EDGE_CURVE('',#229,#457,#458,.T.);+#457=VERTEX_POINT('',#435);+#458=B_SPLINE_CURVE_WITH_KNOTS('',1,(#150,#435),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#459=ORIENTED_EDGE('',*,*,#228,.T.);+#460=ORIENTED_EDGE('',*,*,#461,.T.);+#461=EDGE_CURVE('',#225,#462,#464,.T.);+#462=VERTEX_POINT('',#463);+#463=CARTESIAN_POINT('',(-3.75,-5.92,1.575));+#464=LINE('',#465,#466);+#465=CARTESIAN_POINT('',(-3.75,-5.92,1.159317458569));+#466=VECTOR('',#13,1.);+#467=ORIENTED_EDGE('',*,*,#468,.F.);+#468=EDGE_CURVE('',#457,#462,#434,.T.);+#469=PLANE('',#470);+#470=AXIS2_PLACEMENT_3D('',#435,#28,#87);+#471=ADVANCED_FACE('',(#472),#494,.F.);+#472=FACE_BOUND('',#473,.F.);+#473=EDGE_LOOP('',(#474,#482,#483,#489));+#474=ORIENTED_EDGE('',*,*,#475,.F.);+#475=EDGE_CURVE('',#225,#476,#478,.T.);+#476=VERTEX_POINT('',#477);+#477=CARTESIAN_POINT('',(-4.,-5.92,1.375));+#478=LINE('',#479,#480);+#479=CARTESIAN_POINT('',(-3.6,-5.92,1.375));+#480=VECTOR('',#481,1.);+#481=DIRECTION('',(-1.,1.144237745222E-17,0.));+#482=ORIENTED_EDGE('',*,*,#224,.T.);+#483=ORIENTED_EDGE('',*,*,#484,.T.);+#484=EDGE_CURVE('',#221,#485,#487,.T.);+#485=VERTEX_POINT('',#486);+#486=CARTESIAN_POINT('',(-4.,-5.51,1.375));+#487=LINE('',#488,#480);+#488=CARTESIAN_POINT('',(-3.6,-5.51,1.375));+#489=ORIENTED_EDGE('',*,*,#490,.F.);+#490=EDGE_CURVE('',#476,#485,#491,.T.);+#491=LINE('',#477,#492);+#492=VECTOR('',#493,1.);+#493=DIRECTION('',(1.144237745222E-17,1.,0.));+#494=PLANE('',#495);+#495=AXIS2_PLACEMENT_3D('',#479,#13,#481);+#496=ADVANCED_FACE('',(#497),#469,.F.);+#497=FACE_BOUND('',#498,.F.);+#498=EDGE_LOOP('',(#499,#505,#506,#512));+#499=ORIENTED_EDGE('',*,*,#500,.F.);+#500=EDGE_CURVE('',#221,#501,#503,.T.);+#501=VERTEX_POINT('',#502);+#502=CARTESIAN_POINT('',(-3.75,-5.51,1.575));+#503=LINE('',#504,#466);+#504=CARTESIAN_POINT('',(-3.75,-5.51,1.159317458569));+#505=ORIENTED_EDGE('',*,*,#220,.T.);+#506=ORIENTED_EDGE('',*,*,#507,.T.);+#507=EDGE_CURVE('',#217,#508,#510,.T.);+#508=VERTEX_POINT('',#509);+#509=CARTESIAN_POINT('',(-3.75,-4.65,1.575));+#510=LINE('',#511,#466);+#511=CARTESIAN_POINT('',(-3.75,-4.65,1.159317458569));+#512=ORIENTED_EDGE('',*,*,#513,.F.);+#513=EDGE_CURVE('',#501,#508,#434,.T.);+#514=ADVANCED_FACE('',(#515),#533,.F.);+#515=FACE_BOUND('',#516,.F.);+#516=EDGE_LOOP('',(#517,#523,#524,#530));+#517=ORIENTED_EDGE('',*,*,#518,.F.);+#518=EDGE_CURVE('',#217,#519,#521,.T.);+#519=VERTEX_POINT('',#520);+#520=CARTESIAN_POINT('',(-4.,-4.65,1.375));+#521=LINE('',#522,#480);+#522=CARTESIAN_POINT('',(-3.6,-4.65,1.375));+#523=ORIENTED_EDGE('',*,*,#216,.T.);+#524=ORIENTED_EDGE('',*,*,#525,.T.);+#525=EDGE_CURVE('',#213,#526,#528,.T.);+#526=VERTEX_POINT('',#527);+#527=CARTESIAN_POINT('',(-4.,-4.24,1.375));+#528=LINE('',#529,#480);+#529=CARTESIAN_POINT('',(-3.6,-4.24,1.375));+#530=ORIENTED_EDGE('',*,*,#531,.F.);+#531=EDGE_CURVE('',#519,#526,#532,.T.);+#532=LINE('',#520,#492);+#533=PLANE('',#534);+#534=AXIS2_PLACEMENT_3D('',#522,#13,#481);+#535=ADVANCED_FACE('',(#536),#469,.F.);+#536=FACE_BOUND('',#537,.F.);+#537=EDGE_LOOP('',(#538,#544,#545,#551));+#538=ORIENTED_EDGE('',*,*,#539,.F.);+#539=EDGE_CURVE('',#213,#540,#542,.T.);+#540=VERTEX_POINT('',#541);+#541=CARTESIAN_POINT('',(-3.75,-4.24,1.575));+#542=LINE('',#543,#466);+#543=CARTESIAN_POINT('',(-3.75,-4.24,1.159317458569));+#544=ORIENTED_EDGE('',*,*,#212,.T.);+#545=ORIENTED_EDGE('',*,*,#546,.T.);+#546=EDGE_CURVE('',#209,#547,#549,.T.);+#547=VERTEX_POINT('',#548);+#548=CARTESIAN_POINT('',(-3.75,-3.38,1.575));+#549=LINE('',#550,#466);+#550=CARTESIAN_POINT('',(-3.75,-3.38,1.159317458569));+#551=ORIENTED_EDGE('',*,*,#552,.F.);+#552=EDGE_CURVE('',#540,#547,#434,.T.);+#553=ADVANCED_FACE('',(#554),#572,.F.);+#554=FACE_BOUND('',#555,.F.);+#555=EDGE_LOOP('',(#556,#562,#563,#569));+#556=ORIENTED_EDGE('',*,*,#557,.F.);+#557=EDGE_CURVE('',#209,#558,#560,.T.);+#558=VERTEX_POINT('',#559);+#559=CARTESIAN_POINT('',(-4.,-3.38,1.375));+#560=LINE('',#561,#480);+#561=CARTESIAN_POINT('',(-3.6,-3.38,1.375));+#562=ORIENTED_EDGE('',*,*,#208,.T.);+#563=ORIENTED_EDGE('',*,*,#564,.T.);+#564=EDGE_CURVE('',#205,#565,#567,.T.);+#565=VERTEX_POINT('',#566);+#566=CARTESIAN_POINT('',(-4.,-2.97,1.375));+#567=LINE('',#568,#480);+#568=CARTESIAN_POINT('',(-3.6,-2.97,1.375));+#569=ORIENTED_EDGE('',*,*,#570,.F.);+#570=EDGE_CURVE('',#558,#565,#571,.T.);+#571=LINE('',#559,#492);+#572=PLANE('',#573);+#573=AXIS2_PLACEMENT_3D('',#561,#13,#481);+#574=ADVANCED_FACE('',(#575),#469,.F.);+#575=FACE_BOUND('',#576,.F.);+#576=EDGE_LOOP('',(#577,#583,#584,#590));+#577=ORIENTED_EDGE('',*,*,#578,.F.);+#578=EDGE_CURVE('',#205,#579,#581,.T.);+#579=VERTEX_POINT('',#580);+#580=CARTESIAN_POINT('',(-3.75,-2.97,1.575));+#581=LINE('',#582,#466);+#582=CARTESIAN_POINT('',(-3.75,-2.97,1.159317458569));+#583=ORIENTED_EDGE('',*,*,#204,.T.);+#584=ORIENTED_EDGE('',*,*,#585,.T.);+#585=EDGE_CURVE('',#201,#586,#588,.T.);+#586=VERTEX_POINT('',#587);+#587=CARTESIAN_POINT('',(-3.75,-2.11,1.575));+#588=LINE('',#589,#466);+#589=CARTESIAN_POINT('',(-3.75,-2.11,1.159317458569));+#590=ORIENTED_EDGE('',*,*,#591,.F.);+#591=EDGE_CURVE('',#579,#586,#434,.T.);+#592=ADVANCED_FACE('',(#593),#611,.F.);+#593=FACE_BOUND('',#594,.F.);+#594=EDGE_LOOP('',(#595,#601,#602,#608));+#595=ORIENTED_EDGE('',*,*,#596,.F.);+#596=EDGE_CURVE('',#201,#597,#599,.T.);+#597=VERTEX_POINT('',#598);+#598=CARTESIAN_POINT('',(-4.,-2.11,1.375));+#599=LINE('',#600,#480);+#600=CARTESIAN_POINT('',(-3.6,-2.11,1.375));+#601=ORIENTED_EDGE('',*,*,#200,.T.);+#602=ORIENTED_EDGE('',*,*,#603,.T.);+#603=EDGE_CURVE('',#197,#604,#606,.T.);+#604=VERTEX_POINT('',#605);+#605=CARTESIAN_POINT('',(-4.,-1.7,1.375));+#606=LINE('',#607,#480);+#607=CARTESIAN_POINT('',(-3.6,-1.7,1.375));+#608=ORIENTED_EDGE('',*,*,#609,.F.);+#609=EDGE_CURVE('',#597,#604,#610,.T.);+#610=LINE('',#598,#492);+#611=PLANE('',#612);+#612=AXIS2_PLACEMENT_3D('',#600,#13,#481);+#613=ADVANCED_FACE('',(#614),#469,.F.);+#614=FACE_BOUND('',#615,.F.);+#615=EDGE_LOOP('',(#616,#622,#623,#629));+#616=ORIENTED_EDGE('',*,*,#617,.F.);+#617=EDGE_CURVE('',#197,#618,#620,.T.);+#618=VERTEX_POINT('',#619);+#619=CARTESIAN_POINT('',(-3.75,-1.7,1.575));+#620=LINE('',#621,#466);+#621=CARTESIAN_POINT('',(-3.75,-1.7,1.159317458569));+#622=ORIENTED_EDGE('',*,*,#196,.T.);+#623=ORIENTED_EDGE('',*,*,#624,.T.);+#624=EDGE_CURVE('',#193,#625,#627,.T.);+#625=VERTEX_POINT('',#626);+#626=CARTESIAN_POINT('',(-3.75,-0.84,1.575));+#627=LINE('',#628,#466);+#628=CARTESIAN_POINT('',(-3.75,-0.84,1.159317458569));+#629=ORIENTED_EDGE('',*,*,#630,.F.);+#630=EDGE_CURVE('',#618,#625,#434,.T.);+#631=ADVANCED_FACE('',(#632),#650,.F.);+#632=FACE_BOUND('',#633,.F.);+#633=EDGE_LOOP('',(#634,#640,#641,#647));+#634=ORIENTED_EDGE('',*,*,#635,.F.);+#635=EDGE_CURVE('',#193,#636,#638,.T.);+#636=VERTEX_POINT('',#637);+#637=CARTESIAN_POINT('',(-4.,-0.84,1.375));+#638=LINE('',#639,#480);+#639=CARTESIAN_POINT('',(-3.6,-0.84,1.375));+#640=ORIENTED_EDGE('',*,*,#192,.T.);+#641=ORIENTED_EDGE('',*,*,#642,.T.);+#642=EDGE_CURVE('',#189,#643,#645,.T.);+#643=VERTEX_POINT('',#644);+#644=CARTESIAN_POINT('',(-4.,-0.43,1.375));+#645=LINE('',#646,#480);+#646=CARTESIAN_POINT('',(-3.6,-0.43,1.375));+#647=ORIENTED_EDGE('',*,*,#648,.F.);+#648=EDGE_CURVE('',#636,#643,#649,.T.);+#649=LINE('',#637,#492);+#650=PLANE('',#651);+#651=AXIS2_PLACEMENT_3D('',#639,#13,#481);+#652=ADVANCED_FACE('',(#653),#469,.F.);+#653=FACE_BOUND('',#654,.F.);+#654=EDGE_LOOP('',(#655,#661,#662,#668));+#655=ORIENTED_EDGE('',*,*,#656,.F.);+#656=EDGE_CURVE('',#189,#657,#659,.T.);+#657=VERTEX_POINT('',#658);+#658=CARTESIAN_POINT('',(-3.75,-0.43,1.575));+#659=LINE('',#660,#466);+#660=CARTESIAN_POINT('',(-3.75,-0.43,1.159317458569));+#661=ORIENTED_EDGE('',*,*,#188,.T.);+#662=ORIENTED_EDGE('',*,*,#663,.T.);+#663=EDGE_CURVE('',#185,#664,#666,.T.);+#664=VERTEX_POINT('',#665);+#665=CARTESIAN_POINT('',(-3.75,0.43,1.575));+#666=LINE('',#667,#466);+#667=CARTESIAN_POINT('',(-3.75,0.43,1.159317458569));+#668=ORIENTED_EDGE('',*,*,#669,.F.);+#669=EDGE_CURVE('',#657,#664,#434,.T.);+#670=ADVANCED_FACE('',(#671),#689,.F.);+#671=FACE_BOUND('',#672,.F.);+#672=EDGE_LOOP('',(#673,#679,#680,#686));+#673=ORIENTED_EDGE('',*,*,#674,.F.);+#674=EDGE_CURVE('',#185,#675,#677,.T.);+#675=VERTEX_POINT('',#676);+#676=CARTESIAN_POINT('',(-4.,0.43,1.375));+#677=LINE('',#678,#480);+#678=CARTESIAN_POINT('',(-3.6,0.43,1.375));+#679=ORIENTED_EDGE('',*,*,#184,.T.);+#680=ORIENTED_EDGE('',*,*,#681,.T.);+#681=EDGE_CURVE('',#181,#682,#684,.T.);+#682=VERTEX_POINT('',#683);+#683=CARTESIAN_POINT('',(-4.,0.84,1.375));+#684=LINE('',#685,#480);+#685=CARTESIAN_POINT('',(-3.6,0.84,1.375));+#686=ORIENTED_EDGE('',*,*,#687,.F.);+#687=EDGE_CURVE('',#675,#682,#688,.T.);+#688=LINE('',#676,#492);+#689=PLANE('',#690);+#690=AXIS2_PLACEMENT_3D('',#678,#13,#481);+#691=ADVANCED_FACE('',(#692),#469,.F.);+#692=FACE_BOUND('',#693,.F.);+#693=EDGE_LOOP('',(#694,#700,#701,#707));+#694=ORIENTED_EDGE('',*,*,#695,.F.);+#695=EDGE_CURVE('',#181,#696,#698,.T.);+#696=VERTEX_POINT('',#697);+#697=CARTESIAN_POINT('',(-3.75,0.84,1.575));+#698=LINE('',#699,#466);+#699=CARTESIAN_POINT('',(-3.75,0.84,1.159317458569));+#700=ORIENTED_EDGE('',*,*,#180,.T.);+#701=ORIENTED_EDGE('',*,*,#702,.T.);+#702=EDGE_CURVE('',#177,#703,#705,.T.);+#703=VERTEX_POINT('',#704);+#704=CARTESIAN_POINT('',(-3.75,1.7,1.575));+#705=LINE('',#706,#466);+#706=CARTESIAN_POINT('',(-3.75,1.7,1.159317458569));+#707=ORIENTED_EDGE('',*,*,#708,.F.);+#708=EDGE_CURVE('',#696,#703,#434,.T.);+#709=ADVANCED_FACE('',(#710),#728,.F.);+#710=FACE_BOUND('',#711,.F.);+#711=EDGE_LOOP('',(#712,#718,#719,#725));+#712=ORIENTED_EDGE('',*,*,#713,.F.);+#713=EDGE_CURVE('',#177,#714,#716,.T.);+#714=VERTEX_POINT('',#715);+#715=CARTESIAN_POINT('',(-4.,1.7,1.375));+#716=LINE('',#717,#480);+#717=CARTESIAN_POINT('',(-3.6,1.7,1.375));+#718=ORIENTED_EDGE('',*,*,#176,.T.);+#719=ORIENTED_EDGE('',*,*,#720,.T.);+#720=EDGE_CURVE('',#173,#721,#723,.T.);+#721=VERTEX_POINT('',#722);+#722=CARTESIAN_POINT('',(-4.,2.11,1.375));+#723=LINE('',#724,#480);+#724=CARTESIAN_POINT('',(-3.6,2.11,1.375));+#725=ORIENTED_EDGE('',*,*,#726,.F.);+#726=EDGE_CURVE('',#714,#721,#727,.T.);+#727=LINE('',#715,#492);+#728=PLANE('',#729);+#729=AXIS2_PLACEMENT_3D('',#717,#13,#481);+#730=ADVANCED_FACE('',(#731),#469,.F.);+#731=FACE_BOUND('',#732,.F.);+#732=EDGE_LOOP('',(#733,#739,#740,#746));+#733=ORIENTED_EDGE('',*,*,#734,.F.);+#734=EDGE_CURVE('',#173,#735,#737,.T.);+#735=VERTEX_POINT('',#736);+#736=CARTESIAN_POINT('',(-3.75,2.11,1.575));+#737=LINE('',#738,#466);+#738=CARTESIAN_POINT('',(-3.75,2.11,1.159317458569));+#739=ORIENTED_EDGE('',*,*,#172,.T.);+#740=ORIENTED_EDGE('',*,*,#741,.T.);+#741=EDGE_CURVE('',#169,#742,#744,.T.);+#742=VERTEX_POINT('',#743);+#743=CARTESIAN_POINT('',(-3.75,2.97,1.575));+#744=LINE('',#745,#466);+#745=CARTESIAN_POINT('',(-3.75,2.97,1.159317458569));+#746=ORIENTED_EDGE('',*,*,#747,.F.);+#747=EDGE_CURVE('',#735,#742,#434,.T.);+#748=ADVANCED_FACE('',(#749),#767,.F.);+#749=FACE_BOUND('',#750,.F.);+#750=EDGE_LOOP('',(#751,#757,#758,#764));+#751=ORIENTED_EDGE('',*,*,#752,.F.);+#752=EDGE_CURVE('',#169,#753,#755,.T.);+#753=VERTEX_POINT('',#754);+#754=CARTESIAN_POINT('',(-4.,2.97,1.375));+#755=LINE('',#756,#480);+#756=CARTESIAN_POINT('',(-3.6,2.97,1.375));+#757=ORIENTED_EDGE('',*,*,#168,.T.);+#758=ORIENTED_EDGE('',*,*,#759,.T.);+#759=EDGE_CURVE('',#165,#760,#762,.T.);+#760=VERTEX_POINT('',#761);+#761=CARTESIAN_POINT('',(-4.,3.38,1.375));+#762=LINE('',#763,#480);+#763=CARTESIAN_POINT('',(-3.6,3.38,1.375));+#764=ORIENTED_EDGE('',*,*,#765,.F.);+#765=EDGE_CURVE('',#753,#760,#766,.T.);+#766=LINE('',#754,#492);+#767=PLANE('',#768);+#768=AXIS2_PLACEMENT_3D('',#756,#13,#481);+#769=ADVANCED_FACE('',(#770),#469,.F.);+#770=FACE_BOUND('',#771,.F.);+#771=EDGE_LOOP('',(#772,#778,#779,#785));+#772=ORIENTED_EDGE('',*,*,#773,.F.);+#773=EDGE_CURVE('',#165,#774,#776,.T.);+#774=VERTEX_POINT('',#775);+#775=CARTESIAN_POINT('',(-3.75,3.38,1.575));+#776=LINE('',#777,#466);+#777=CARTESIAN_POINT('',(-3.75,3.38,1.159317458569));+#778=ORIENTED_EDGE('',*,*,#164,.T.);+#779=ORIENTED_EDGE('',*,*,#780,.T.);+#780=EDGE_CURVE('',#161,#781,#783,.T.);+#781=VERTEX_POINT('',#782);+#782=CARTESIAN_POINT('',(-3.75,4.24,1.575));+#783=LINE('',#784,#466);+#784=CARTESIAN_POINT('',(-3.75,4.24,1.159317458569));+#785=ORIENTED_EDGE('',*,*,#786,.F.);+#786=EDGE_CURVE('',#774,#781,#434,.T.);+#787=ADVANCED_FACE('',(#788),#806,.F.);+#788=FACE_BOUND('',#789,.F.);+#789=EDGE_LOOP('',(#790,#796,#797,#803));+#790=ORIENTED_EDGE('',*,*,#791,.F.);+#791=EDGE_CURVE('',#161,#792,#794,.T.);+#792=VERTEX_POINT('',#793);+#793=CARTESIAN_POINT('',(-4.,4.24,1.375));+#794=LINE('',#795,#480);+#795=CARTESIAN_POINT('',(-3.6,4.24,1.375));+#796=ORIENTED_EDGE('',*,*,#160,.T.);+#797=ORIENTED_EDGE('',*,*,#798,.T.);+#798=EDGE_CURVE('',#157,#799,#801,.T.);+#799=VERTEX_POINT('',#800);+#800=CARTESIAN_POINT('',(-4.,4.65,1.375));+#801=LINE('',#802,#480);+#802=CARTESIAN_POINT('',(-3.6,4.65,1.375));+#803=ORIENTED_EDGE('',*,*,#804,.F.);+#804=EDGE_CURVE('',#792,#799,#805,.T.);+#805=LINE('',#793,#492);+#806=PLANE('',#807);+#807=AXIS2_PLACEMENT_3D('',#795,#13,#481);+#808=ADVANCED_FACE('',(#809),#469,.F.);+#809=FACE_BOUND('',#810,.F.);+#810=EDGE_LOOP('',(#811,#817,#818,#824));+#811=ORIENTED_EDGE('',*,*,#812,.F.);+#812=EDGE_CURVE('',#157,#813,#815,.T.);+#813=VERTEX_POINT('',#814);+#814=CARTESIAN_POINT('',(-3.75,4.65,1.575));+#815=LINE('',#816,#466);+#816=CARTESIAN_POINT('',(-3.75,4.65,1.159317458569));+#817=ORIENTED_EDGE('',*,*,#156,.T.);+#818=ORIENTED_EDGE('',*,*,#819,.T.);+#819=EDGE_CURVE('',#153,#820,#822,.T.);+#820=VERTEX_POINT('',#821);+#821=CARTESIAN_POINT('',(-3.75,5.51,1.575));+#822=LINE('',#823,#466);+#823=CARTESIAN_POINT('',(-3.75,5.51,1.159317458569));+#824=ORIENTED_EDGE('',*,*,#825,.F.);+#825=EDGE_CURVE('',#813,#820,#434,.T.);+#826=ADVANCED_FACE('',(#827),#845,.F.);+#827=FACE_BOUND('',#828,.F.);+#828=EDGE_LOOP('',(#829,#835,#836,#842));+#829=ORIENTED_EDGE('',*,*,#830,.F.);+#830=EDGE_CURVE('',#153,#831,#833,.T.);+#831=VERTEX_POINT('',#832);+#832=CARTESIAN_POINT('',(-4.,5.51,1.375));+#833=LINE('',#834,#480);+#834=CARTESIAN_POINT('',(-3.6,5.51,1.375));+#835=ORIENTED_EDGE('',*,*,#152,.T.);+#836=ORIENTED_EDGE('',*,*,#837,.T.);+#837=EDGE_CURVE('',#147,#838,#840,.T.);+#838=VERTEX_POINT('',#839);+#839=CARTESIAN_POINT('',(-4.,5.92,1.375));+#840=LINE('',#841,#480);+#841=CARTESIAN_POINT('',(-3.6,5.92,1.375));+#842=ORIENTED_EDGE('',*,*,#843,.F.);+#843=EDGE_CURVE('',#831,#838,#844,.T.);+#844=LINE('',#832,#492);+#845=PLANE('',#846);+#846=AXIS2_PLACEMENT_3D('',#834,#13,#481);+#847=ADVANCED_FACE('',(#848),#469,.F.);+#848=FACE_BOUND('',#849,.F.);+#849=EDGE_LOOP('',(#850,#854,#855,#856));+#850=ORIENTED_EDGE('',*,*,#851,.F.);+#851=EDGE_CURVE('',#147,#426,#852,.T.);+#852=LINE('',#853,#466);+#853=CARTESIAN_POINT('',(-3.75,5.92,1.159317458569));+#854=ORIENTED_EDGE('',*,*,#146,.T.);+#855=ORIENTED_EDGE('',*,*,#448,.T.);+#856=ORIENTED_EDGE('',*,*,#433,.F.);+#857=ADVANCED_FACE('',(#858),#867,.F.);+#858=FACE_BOUND('',#859,.F.);+#859=EDGE_LOOP('',(#860,#861,#862,#866));+#860=ORIENTED_EDGE('',*,*,#367,.F.);+#861=ORIENTED_EDGE('',*,*,#324,.T.);+#862=ORIENTED_EDGE('',*,*,#863,.T.);+#863=EDGE_CURVE('',#321,#389,#864,.T.);+#864=LINE('',#865,#466);+#865=CARTESIAN_POINT('',(3.75,5.92,1.159317458569));+#866=ORIENTED_EDGE('',*,*,#388,.F.);+#867=PLANE('',#868);+#868=AXIS2_PLACEMENT_3D('',#369,#73,#59);+#869=ADVANCED_FACE('',(#870),#888,.F.);+#870=FACE_BOUND('',#871,.F.);+#871=EDGE_LOOP('',(#872,#878,#879,#885));+#872=ORIENTED_EDGE('',*,*,#873,.F.);+#873=EDGE_CURVE('',#321,#874,#876,.T.);+#874=VERTEX_POINT('',#875);+#875=CARTESIAN_POINT('',(4.,5.92,1.375));+#876=LINE('',#877,#27);+#877=CARTESIAN_POINT('',(3.6,5.92,1.375));+#878=ORIENTED_EDGE('',*,*,#320,.T.);+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#317,#881,#883,.T.);+#881=VERTEX_POINT('',#882);+#882=CARTESIAN_POINT('',(4.,5.51,1.375));+#883=LINE('',#884,#27);+#884=CARTESIAN_POINT('',(3.6,5.51,1.375));+#885=ORIENTED_EDGE('',*,*,#886,.F.);+#886=EDGE_CURVE('',#874,#881,#887,.T.);+#887=LINE('',#875,#58);+#888=PLANE('',#889);+#889=AXIS2_PLACEMENT_3D('',#877,#13,#28);+#890=ADVANCED_FACE('',(#891),#867,.F.);+#891=FACE_BOUND('',#892,.F.);+#892=EDGE_LOOP('',(#893,#899,#900,#906));+#893=ORIENTED_EDGE('',*,*,#894,.F.);+#894=EDGE_CURVE('',#317,#895,#897,.T.);+#895=VERTEX_POINT('',#896);+#896=CARTESIAN_POINT('',(3.75,5.51,1.575));+#897=LINE('',#898,#466);+#898=CARTESIAN_POINT('',(3.75,5.51,1.159317458569));+#899=ORIENTED_EDGE('',*,*,#316,.T.);+#900=ORIENTED_EDGE('',*,*,#901,.T.);+#901=EDGE_CURVE('',#313,#902,#904,.T.);+#902=VERTEX_POINT('',#903);+#903=CARTESIAN_POINT('',(3.75,4.65,1.575));+#904=LINE('',#905,#466);+#905=CARTESIAN_POINT('',(3.75,4.65,1.159317458569));+#906=ORIENTED_EDGE('',*,*,#907,.F.);+#907=EDGE_CURVE('',#895,#902,#391,.T.);+#908=ADVANCED_FACE('',(#909),#927,.F.);+#909=FACE_BOUND('',#910,.F.);+#910=EDGE_LOOP('',(#911,#917,#918,#924));+#911=ORIENTED_EDGE('',*,*,#912,.F.);+#912=EDGE_CURVE('',#313,#913,#915,.T.);+#913=VERTEX_POINT('',#914);+#914=CARTESIAN_POINT('',(4.,4.65,1.375));+#915=LINE('',#916,#27);+#916=CARTESIAN_POINT('',(3.6,4.65,1.375));+#917=ORIENTED_EDGE('',*,*,#312,.T.);+#918=ORIENTED_EDGE('',*,*,#919,.T.);+#919=EDGE_CURVE('',#309,#920,#922,.T.);+#920=VERTEX_POINT('',#921);+#921=CARTESIAN_POINT('',(4.,4.24,1.375));+#922=LINE('',#923,#27);+#923=CARTESIAN_POINT('',(3.6,4.24,1.375));+#924=ORIENTED_EDGE('',*,*,#925,.F.);+#925=EDGE_CURVE('',#913,#920,#926,.T.);+#926=LINE('',#914,#58);+#927=PLANE('',#928);+#928=AXIS2_PLACEMENT_3D('',#916,#13,#28);+#929=ADVANCED_FACE('',(#930),#867,.F.);+#930=FACE_BOUND('',#931,.F.);+#931=EDGE_LOOP('',(#932,#938,#939,#945));+#932=ORIENTED_EDGE('',*,*,#933,.F.);+#933=EDGE_CURVE('',#309,#934,#936,.T.);+#934=VERTEX_POINT('',#935);+#935=CARTESIAN_POINT('',(3.75,4.24,1.575));+#936=LINE('',#937,#466);+#937=CARTESIAN_POINT('',(3.75,4.24,1.159317458569));+#938=ORIENTED_EDGE('',*,*,#308,.T.);+#939=ORIENTED_EDGE('',*,*,#940,.T.);+#940=EDGE_CURVE('',#305,#941,#943,.T.);+#941=VERTEX_POINT('',#942);+#942=CARTESIAN_POINT('',(3.75,3.38,1.575));+#943=LINE('',#944,#466);+#944=CARTESIAN_POINT('',(3.75,3.38,1.159317458569));+#945=ORIENTED_EDGE('',*,*,#946,.F.);+#946=EDGE_CURVE('',#934,#941,#391,.T.);+#947=ADVANCED_FACE('',(#948),#966,.F.);+#948=FACE_BOUND('',#949,.F.);+#949=EDGE_LOOP('',(#950,#956,#957,#963));+#950=ORIENTED_EDGE('',*,*,#951,.F.);+#951=EDGE_CURVE('',#305,#952,#954,.T.);+#952=VERTEX_POINT('',#953);+#953=CARTESIAN_POINT('',(4.,3.38,1.375));+#954=LINE('',#955,#27);+#955=CARTESIAN_POINT('',(3.6,3.38,1.375));+#956=ORIENTED_EDGE('',*,*,#304,.T.);+#957=ORIENTED_EDGE('',*,*,#958,.T.);+#958=EDGE_CURVE('',#301,#959,#961,.T.);+#959=VERTEX_POINT('',#960);+#960=CARTESIAN_POINT('',(4.,2.97,1.375));+#961=LINE('',#962,#27);+#962=CARTESIAN_POINT('',(3.6,2.97,1.375));+#963=ORIENTED_EDGE('',*,*,#964,.F.);+#964=EDGE_CURVE('',#952,#959,#965,.T.);+#965=LINE('',#953,#58);+#966=PLANE('',#967);+#967=AXIS2_PLACEMENT_3D('',#955,#13,#28);+#968=ADVANCED_FACE('',(#969),#867,.F.);+#969=FACE_BOUND('',#970,.F.);+#970=EDGE_LOOP('',(#971,#977,#978,#984));+#971=ORIENTED_EDGE('',*,*,#972,.F.);+#972=EDGE_CURVE('',#301,#973,#975,.T.);+#973=VERTEX_POINT('',#974);+#974=CARTESIAN_POINT('',(3.75,2.97,1.575));+#975=LINE('',#976,#466);+#976=CARTESIAN_POINT('',(3.75,2.97,1.159317458569));+#977=ORIENTED_EDGE('',*,*,#300,.T.);+#978=ORIENTED_EDGE('',*,*,#979,.T.);+#979=EDGE_CURVE('',#297,#980,#982,.T.);+#980=VERTEX_POINT('',#981);+#981=CARTESIAN_POINT('',(3.75,2.11,1.575));+#982=LINE('',#983,#466);+#983=CARTESIAN_POINT('',(3.75,2.11,1.159317458569));+#984=ORIENTED_EDGE('',*,*,#985,.F.);+#985=EDGE_CURVE('',#973,#980,#391,.T.);+#986=ADVANCED_FACE('',(#987),#1005,.F.);+#987=FACE_BOUND('',#988,.F.);+#988=EDGE_LOOP('',(#989,#995,#996,#1002));+#989=ORIENTED_EDGE('',*,*,#990,.F.);+#990=EDGE_CURVE('',#297,#991,#993,.T.);+#991=VERTEX_POINT('',#992);+#992=CARTESIAN_POINT('',(4.,2.11,1.375));+#993=LINE('',#994,#27);+#994=CARTESIAN_POINT('',(3.6,2.11,1.375));+#995=ORIENTED_EDGE('',*,*,#296,.T.);+#996=ORIENTED_EDGE('',*,*,#997,.T.);+#997=EDGE_CURVE('',#293,#998,#1000,.T.);+#998=VERTEX_POINT('',#999);+#999=CARTESIAN_POINT('',(4.,1.7,1.375));+#1000=LINE('',#1001,#27);+#1001=CARTESIAN_POINT('',(3.6,1.7,1.375));+#1002=ORIENTED_EDGE('',*,*,#1003,.F.);+#1003=EDGE_CURVE('',#991,#998,#1004,.T.);+#1004=LINE('',#992,#58);+#1005=PLANE('',#1006);+#1006=AXIS2_PLACEMENT_3D('',#994,#13,#28);+#1007=ADVANCED_FACE('',(#1008),#867,.F.);+#1008=FACE_BOUND('',#1009,.F.);+#1009=EDGE_LOOP('',(#1010,#1016,#1017,#1023));+#1010=ORIENTED_EDGE('',*,*,#1011,.F.);+#1011=EDGE_CURVE('',#293,#1012,#1014,.T.);+#1012=VERTEX_POINT('',#1013);+#1013=CARTESIAN_POINT('',(3.75,1.7,1.575));+#1014=LINE('',#1015,#466);+#1015=CARTESIAN_POINT('',(3.75,1.7,1.159317458569));+#1016=ORIENTED_EDGE('',*,*,#292,.T.);+#1017=ORIENTED_EDGE('',*,*,#1018,.T.);+#1018=EDGE_CURVE('',#289,#1019,#1021,.T.);+#1019=VERTEX_POINT('',#1020);+#1020=CARTESIAN_POINT('',(3.75,0.84,1.575));+#1021=LINE('',#1022,#466);+#1022=CARTESIAN_POINT('',(3.75,0.84,1.159317458569));+#1023=ORIENTED_EDGE('',*,*,#1024,.F.);+#1024=EDGE_CURVE('',#1012,#1019,#391,.T.);+#1025=ADVANCED_FACE('',(#1026),#1044,.F.);+#1026=FACE_BOUND('',#1027,.F.);+#1027=EDGE_LOOP('',(#1028,#1034,#1035,#1041));+#1028=ORIENTED_EDGE('',*,*,#1029,.F.);+#1029=EDGE_CURVE('',#289,#1030,#1032,.T.);+#1030=VERTEX_POINT('',#1031);+#1031=CARTESIAN_POINT('',(4.,0.84,1.375));+#1032=LINE('',#1033,#27);+#1033=CARTESIAN_POINT('',(3.6,0.84,1.375));+#1034=ORIENTED_EDGE('',*,*,#288,.T.);+#1035=ORIENTED_EDGE('',*,*,#1036,.T.);+#1036=EDGE_CURVE('',#285,#1037,#1039,.T.);+#1037=VERTEX_POINT('',#1038);+#1038=CARTESIAN_POINT('',(4.,0.43,1.375));+#1039=LINE('',#1040,#27);+#1040=CARTESIAN_POINT('',(3.6,0.43,1.375));+#1041=ORIENTED_EDGE('',*,*,#1042,.F.);+#1042=EDGE_CURVE('',#1030,#1037,#1043,.T.);+#1043=LINE('',#1031,#58);+#1044=PLANE('',#1045);+#1045=AXIS2_PLACEMENT_3D('',#1033,#13,#28);+#1046=ADVANCED_FACE('',(#1047),#867,.F.);+#1047=FACE_BOUND('',#1048,.F.);+#1048=EDGE_LOOP('',(#1049,#1055,#1056,#1062));+#1049=ORIENTED_EDGE('',*,*,#1050,.F.);+#1050=EDGE_CURVE('',#285,#1051,#1053,.T.);+#1051=VERTEX_POINT('',#1052);+#1052=CARTESIAN_POINT('',(3.75,0.43,1.575));+#1053=LINE('',#1054,#466);+#1054=CARTESIAN_POINT('',(3.75,0.43,1.159317458569));+#1055=ORIENTED_EDGE('',*,*,#284,.T.);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#281,#1058,#1060,.T.);+#1058=VERTEX_POINT('',#1059);+#1059=CARTESIAN_POINT('',(3.75,-0.43,1.575));+#1060=LINE('',#1061,#466);+#1061=CARTESIAN_POINT('',(3.75,-0.43,1.159317458569));+#1062=ORIENTED_EDGE('',*,*,#1063,.F.);+#1063=EDGE_CURVE('',#1051,#1058,#391,.T.);+#1064=ADVANCED_FACE('',(#1065),#1083,.F.);+#1065=FACE_BOUND('',#1066,.F.);+#1066=EDGE_LOOP('',(#1067,#1073,#1074,#1080));+#1067=ORIENTED_EDGE('',*,*,#1068,.F.);+#1068=EDGE_CURVE('',#281,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(4.,-0.43,1.375));+#1071=LINE('',#1072,#27);+#1072=CARTESIAN_POINT('',(3.6,-0.43,1.375));+#1073=ORIENTED_EDGE('',*,*,#280,.T.);+#1074=ORIENTED_EDGE('',*,*,#1075,.T.);+#1075=EDGE_CURVE('',#277,#1076,#1078,.T.);+#1076=VERTEX_POINT('',#1077);+#1077=CARTESIAN_POINT('',(4.,-0.84,1.375));+#1078=LINE('',#1079,#27);+#1079=CARTESIAN_POINT('',(3.6,-0.84,1.375));+#1080=ORIENTED_EDGE('',*,*,#1081,.F.);+#1081=EDGE_CURVE('',#1069,#1076,#1082,.T.);+#1082=LINE('',#1070,#58);+#1083=PLANE('',#1084);+#1084=AXIS2_PLACEMENT_3D('',#1072,#13,#28);+#1085=ADVANCED_FACE('',(#1086),#867,.F.);+#1086=FACE_BOUND('',#1087,.F.);+#1087=EDGE_LOOP('',(#1088,#1094,#1095,#1101));+#1088=ORIENTED_EDGE('',*,*,#1089,.F.);+#1089=EDGE_CURVE('',#277,#1090,#1092,.T.);+#1090=VERTEX_POINT('',#1091);+#1091=CARTESIAN_POINT('',(3.75,-0.84,1.575));+#1092=LINE('',#1093,#466);+#1093=CARTESIAN_POINT('',(3.75,-0.84,1.159317458569));+#1094=ORIENTED_EDGE('',*,*,#276,.T.);+#1095=ORIENTED_EDGE('',*,*,#1096,.T.);+#1096=EDGE_CURVE('',#273,#1097,#1099,.T.);+#1097=VERTEX_POINT('',#1098);+#1098=CARTESIAN_POINT('',(3.75,-1.7,1.575));+#1099=LINE('',#1100,#466);+#1100=CARTESIAN_POINT('',(3.75,-1.7,1.159317458569));+#1101=ORIENTED_EDGE('',*,*,#1102,.F.);+#1102=EDGE_CURVE('',#1090,#1097,#391,.T.);+#1103=ADVANCED_FACE('',(#1104),#1122,.F.);+#1104=FACE_BOUND('',#1105,.F.);+#1105=EDGE_LOOP('',(#1106,#1112,#1113,#1119));+#1106=ORIENTED_EDGE('',*,*,#1107,.F.);+#1107=EDGE_CURVE('',#273,#1108,#1110,.T.);+#1108=VERTEX_POINT('',#1109);+#1109=CARTESIAN_POINT('',(4.,-1.7,1.375));+#1110=LINE('',#1111,#27);+#1111=CARTESIAN_POINT('',(3.6,-1.7,1.375));+#1112=ORIENTED_EDGE('',*,*,#272,.T.);+#1113=ORIENTED_EDGE('',*,*,#1114,.T.);+#1114=EDGE_CURVE('',#269,#1115,#1117,.T.);+#1115=VERTEX_POINT('',#1116);+#1116=CARTESIAN_POINT('',(4.,-2.11,1.375));+#1117=LINE('',#1118,#27);+#1118=CARTESIAN_POINT('',(3.6,-2.11,1.375));+#1119=ORIENTED_EDGE('',*,*,#1120,.F.);+#1120=EDGE_CURVE('',#1108,#1115,#1121,.T.);+#1121=LINE('',#1109,#58);+#1122=PLANE('',#1123);+#1123=AXIS2_PLACEMENT_3D('',#1111,#13,#28);+#1124=ADVANCED_FACE('',(#1125),#867,.F.);+#1125=FACE_BOUND('',#1126,.F.);+#1126=EDGE_LOOP('',(#1127,#1133,#1134,#1140));+#1127=ORIENTED_EDGE('',*,*,#1128,.F.);+#1128=EDGE_CURVE('',#269,#1129,#1131,.T.);+#1129=VERTEX_POINT('',#1130);+#1130=CARTESIAN_POINT('',(3.75,-2.11,1.575));+#1131=LINE('',#1132,#466);+#1132=CARTESIAN_POINT('',(3.75,-2.11,1.159317458569));+#1133=ORIENTED_EDGE('',*,*,#268,.T.);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#265,#1136,#1138,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(3.75,-2.97,1.575));+#1138=LINE('',#1139,#466);+#1139=CARTESIAN_POINT('',(3.75,-2.97,1.159317458569));+#1140=ORIENTED_EDGE('',*,*,#1141,.F.);+#1141=EDGE_CURVE('',#1129,#1136,#391,.T.);+#1142=ADVANCED_FACE('',(#1143),#1161,.F.);+#1143=FACE_BOUND('',#1144,.F.);+#1144=EDGE_LOOP('',(#1145,#1151,#1152,#1158));+#1145=ORIENTED_EDGE('',*,*,#1146,.F.);+#1146=EDGE_CURVE('',#265,#1147,#1149,.T.);+#1147=VERTEX_POINT('',#1148);+#1148=CARTESIAN_POINT('',(4.,-2.97,1.375));+#1149=LINE('',#1150,#27);+#1150=CARTESIAN_POINT('',(3.6,-2.97,1.375));+#1151=ORIENTED_EDGE('',*,*,#264,.T.);+#1152=ORIENTED_EDGE('',*,*,#1153,.T.);+#1153=EDGE_CURVE('',#261,#1154,#1156,.T.);+#1154=VERTEX_POINT('',#1155);+#1155=CARTESIAN_POINT('',(4.,-3.38,1.375));+#1156=LINE('',#1157,#27);+#1157=CARTESIAN_POINT('',(3.6,-3.38,1.375));+#1158=ORIENTED_EDGE('',*,*,#1159,.F.);+#1159=EDGE_CURVE('',#1147,#1154,#1160,.T.);+#1160=LINE('',#1148,#58);+#1161=PLANE('',#1162);+#1162=AXIS2_PLACEMENT_3D('',#1150,#13,#28);+#1163=ADVANCED_FACE('',(#1164),#867,.F.);+#1164=FACE_BOUND('',#1165,.F.);+#1165=EDGE_LOOP('',(#1166,#1172,#1173,#1179));+#1166=ORIENTED_EDGE('',*,*,#1167,.F.);+#1167=EDGE_CURVE('',#261,#1168,#1170,.T.);+#1168=VERTEX_POINT('',#1169);+#1169=CARTESIAN_POINT('',(3.75,-3.38,1.575));+#1170=LINE('',#1171,#466);+#1171=CARTESIAN_POINT('',(3.75,-3.38,1.159317458569));+#1172=ORIENTED_EDGE('',*,*,#260,.T.);+#1173=ORIENTED_EDGE('',*,*,#1174,.T.);+#1174=EDGE_CURVE('',#257,#1175,#1177,.T.);+#1175=VERTEX_POINT('',#1176);+#1176=CARTESIAN_POINT('',(3.75,-4.24,1.575));+#1177=LINE('',#1178,#466);+#1178=CARTESIAN_POINT('',(3.75,-4.24,1.159317458569));+#1179=ORIENTED_EDGE('',*,*,#1180,.F.);+#1180=EDGE_CURVE('',#1168,#1175,#391,.T.);+#1181=ADVANCED_FACE('',(#1182),#1200,.F.);+#1182=FACE_BOUND('',#1183,.F.);+#1183=EDGE_LOOP('',(#1184,#1190,#1191,#1197));+#1184=ORIENTED_EDGE('',*,*,#1185,.F.);+#1185=EDGE_CURVE('',#257,#1186,#1188,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(4.,-4.24,1.375));+#1188=LINE('',#1189,#27);+#1189=CARTESIAN_POINT('',(3.6,-4.24,1.375));+#1190=ORIENTED_EDGE('',*,*,#256,.T.);+#1191=ORIENTED_EDGE('',*,*,#1192,.T.);+#1192=EDGE_CURVE('',#253,#1193,#1195,.T.);+#1193=VERTEX_POINT('',#1194);+#1194=CARTESIAN_POINT('',(4.,-4.65,1.375));+#1195=LINE('',#1196,#27);+#1196=CARTESIAN_POINT('',(3.6,-4.65,1.375));+#1197=ORIENTED_EDGE('',*,*,#1198,.F.);+#1198=EDGE_CURVE('',#1186,#1193,#1199,.T.);+#1199=LINE('',#1187,#58);+#1200=PLANE('',#1201);+#1201=AXIS2_PLACEMENT_3D('',#1189,#13,#28);+#1202=ADVANCED_FACE('',(#1203),#867,.F.);+#1203=FACE_BOUND('',#1204,.F.);+#1204=EDGE_LOOP('',(#1205,#1211,#1212,#1218));+#1205=ORIENTED_EDGE('',*,*,#1206,.F.);+#1206=EDGE_CURVE('',#253,#1207,#1209,.T.);+#1207=VERTEX_POINT('',#1208);+#1208=CARTESIAN_POINT('',(3.75,-4.65,1.575));+#1209=LINE('',#1210,#466);+#1210=CARTESIAN_POINT('',(3.75,-4.65,1.159317458569));+#1211=ORIENTED_EDGE('',*,*,#252,.T.);+#1212=ORIENTED_EDGE('',*,*,#1213,.T.);+#1213=EDGE_CURVE('',#249,#1214,#1216,.T.);+#1214=VERTEX_POINT('',#1215);+#1215=CARTESIAN_POINT('',(3.75,-5.51,1.575));+#1216=LINE('',#1217,#466);+#1217=CARTESIAN_POINT('',(3.75,-5.51,1.159317458569));+#1218=ORIENTED_EDGE('',*,*,#1219,.F.);+#1219=EDGE_CURVE('',#1207,#1214,#391,.T.);+#1220=ADVANCED_FACE('',(#1221),#1239,.F.);+#1221=FACE_BOUND('',#1222,.F.);+#1222=EDGE_LOOP('',(#1223,#1229,#1230,#1236));+#1223=ORIENTED_EDGE('',*,*,#1224,.F.);+#1224=EDGE_CURVE('',#249,#1225,#1227,.T.);+#1225=VERTEX_POINT('',#1226);+#1226=CARTESIAN_POINT('',(4.,-5.51,1.375));+#1227=LINE('',#1228,#27);+#1228=CARTESIAN_POINT('',(3.6,-5.51,1.375));+#1229=ORIENTED_EDGE('',*,*,#248,.T.);+#1230=ORIENTED_EDGE('',*,*,#1231,.T.);+#1231=EDGE_CURVE('',#244,#1232,#1234,.T.);+#1232=VERTEX_POINT('',#1233);+#1233=CARTESIAN_POINT('',(4.,-5.92,1.375));+#1234=LINE('',#1235,#27);+#1235=CARTESIAN_POINT('',(3.6,-5.92,1.375));+#1236=ORIENTED_EDGE('',*,*,#1237,.F.);+#1237=EDGE_CURVE('',#1225,#1232,#1238,.T.);+#1238=LINE('',#1226,#58);+#1239=PLANE('',#1240);+#1240=AXIS2_PLACEMENT_3D('',#1228,#13,#28);+#1241=ADVANCED_FACE('',(#1242),#867,.F.);+#1242=FACE_BOUND('',#1243,.F.);+#1243=EDGE_LOOP('',(#1244,#1250,#1251,#1256));+#1244=ORIENTED_EDGE('',*,*,#1245,.F.);+#1245=EDGE_CURVE('',#244,#1246,#1248,.T.);+#1246=VERTEX_POINT('',#1247);+#1247=CARTESIAN_POINT('',(3.75,-5.92,1.575));+#1248=LINE('',#1249,#466);+#1249=CARTESIAN_POINT('',(3.75,-5.92,1.159317458569));+#1250=ORIENTED_EDGE('',*,*,#243,.T.);+#1251=ORIENTED_EDGE('',*,*,#1252,.T.);+#1252=EDGE_CURVE('',#239,#1253,#1255,.T.);+#1253=VERTEX_POINT('',#1254);+#1254=CARTESIAN_POINT('',(3.75,-6.225,1.575));+#1255=B_SPLINE_CURVE_WITH_KNOTS('',1,(#240,#1254),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1256=ORIENTED_EDGE('',*,*,#1257,.F.);+#1257=EDGE_CURVE('',#1246,#1253,#391,.T.);+#1258=ADVANCED_FACE('',(#1259),#1271,.F.);+#1259=FACE_BOUND('',#1260,.F.);+#1260=EDGE_LOOP('',(#1261,#1262,#1263,#1268));+#1261=ORIENTED_EDGE('',*,*,#332,.T.);+#1262=ORIENTED_EDGE('',*,*,#456,.T.);+#1263=ORIENTED_EDGE('',*,*,#1264,.F.);+#1264=EDGE_CURVE('',#1265,#457,#1267,.T.);+#1265=VERTEX_POINT('',#1266);+#1266=CARTESIAN_POINT('',(-3.575,-6.4,1.575));+#1267=LINE('',#1266,#79);+#1268=ORIENTED_EDGE('',*,*,#1269,.F.);+#1269=EDGE_CURVE('',#333,#1265,#1270,.T.);+#1270=B_SPLINE_CURVE_WITH_KNOTS('',1,(#334,#1266),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1271=PLANE('',#1272);+#1272=AXIS2_PLACEMENT_3D('',#1266,#92,#80);+#1273=ADVANCED_FACE('',(#1274),#1286,.F.);+#1274=FACE_BOUND('',#1275,.F.);+#1275=EDGE_LOOP('',(#1276,#1277,#1282,#1285));+#1276=ORIENTED_EDGE('',*,*,#349,.T.);+#1277=ORIENTED_EDGE('',*,*,#1278,.T.);+#1278=EDGE_CURVE('',#345,#1279,#1281,.T.);+#1279=VERTEX_POINT('',#1280);+#1280=CARTESIAN_POINT('',(3.575,-6.4,1.575));+#1281=B_SPLINE_CURVE_WITH_KNOTS('',1,(#346,#1280),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1282=ORIENTED_EDGE('',*,*,#1283,.F.);+#1283=EDGE_CURVE('',#1253,#1279,#1284,.T.);+#1284=LINE('',#1254,#65);+#1285=ORIENTED_EDGE('',*,*,#1252,.F.);+#1286=PLANE('',#1287);+#1287=AXIS2_PLACEMENT_3D('',#1254,#80,#66);+#1288=ADVANCED_FACE('',(#1289),#1297,.F.);+#1289=FACE_BOUND('',#1290,.F.);+#1290=EDGE_LOOP('',(#1291,#1292,#1293,#1296));+#1291=ORIENTED_EDGE('',*,*,#358,.T.);+#1292=ORIENTED_EDGE('',*,*,#1269,.T.);+#1293=ORIENTED_EDGE('',*,*,#1294,.F.);+#1294=EDGE_CURVE('',#1279,#1265,#1295,.T.);+#1295=LINE('',#1280,#72);+#1296=ORIENTED_EDGE('',*,*,#1278,.F.);+#1297=PLANE('',#1298);+#1298=AXIS2_PLACEMENT_3D('',#1280,#87,#73);+#1299=ADVANCED_FACE('',(#1300),#1320,.F.);+#1300=FACE_BOUND('',#1301,.F.);+#1301=EDGE_LOOP('',(#1302,#1307,#1311,#1313,#1314,#1318));+#1302=ORIENTED_EDGE('',*,*,#1303,.F.);+#1303=EDGE_CURVE('',#1304,#820,#1306,.T.);+#1304=VERTEX_POINT('',#1305);+#1305=CARTESIAN_POINT('',(-4.,5.51,1.575));+#1306=LINE('',#1305,#430);+#1307=ORIENTED_EDGE('',*,*,#1308,.T.);+#1308=EDGE_CURVE('',#1304,#1309,#1310,.T.);+#1309=VERTEX_POINT('',#429);+#1310=LINE('',#1305,#492);+#1311=ORIENTED_EDGE('',*,*,#1312,.T.);+#1312=EDGE_CURVE('',#1309,#426,#428,.T.);+#1313=ORIENTED_EDGE('',*,*,#425,.T.);+#1314=ORIENTED_EDGE('',*,*,#1315,.F.);+#1315=EDGE_CURVE('',#1316,#420,#422,.T.);+#1316=VERTEX_POINT('',#1317);+#1317=CARTESIAN_POINT('',(-3.675,5.51,1.575));+#1318=ORIENTED_EDGE('',*,*,#1319,.F.);+#1319=EDGE_CURVE('',#820,#1316,#1306,.T.);+#1320=PLANE('',#1321);+#1321=AXIS2_PLACEMENT_3D('',#1305,#1322,#431);+#1322=DIRECTION('',(0.,0.,-1.));+#1323=ADVANCED_FACE('',(#1324),#1416,.F.);+#1324=FACE_BOUND('',#1325,.F.);+#1325=EDGE_LOOP('',(#1326,#1331,#1335,#1339,#1343,#1347,#1351,#1355,#1359,#1363,#1367,#1371,#1375,#1379,#1383,#1387,#1391,#1395,#1399,#1401,#1402,#1403,#1408,#1413));+#1326=ORIENTED_EDGE('',*,*,#1327,.T.);+#1327=EDGE_CURVE('',#1328,#1329,#422,.T.);+#1328=VERTEX_POINT('',#423);+#1329=VERTEX_POINT('',#1330);+#1330=CARTESIAN_POINT('',(-3.675,-5.92,1.575));+#1331=ORIENTED_EDGE('',*,*,#1332,.T.);+#1332=EDGE_CURVE('',#1329,#1333,#422,.T.);+#1333=VERTEX_POINT('',#1334);+#1334=CARTESIAN_POINT('',(-3.675,-5.51,1.575));+#1335=ORIENTED_EDGE('',*,*,#1336,.T.);+#1336=EDGE_CURVE('',#1333,#1337,#422,.T.);+#1337=VERTEX_POINT('',#1338);+#1338=CARTESIAN_POINT('',(-3.675,-4.65,1.575));+#1339=ORIENTED_EDGE('',*,*,#1340,.T.);+#1340=EDGE_CURVE('',#1337,#1341,#422,.T.);+#1341=VERTEX_POINT('',#1342);+#1342=CARTESIAN_POINT('',(-3.675,-4.24,1.575));+#1343=ORIENTED_EDGE('',*,*,#1344,.T.);+#1344=EDGE_CURVE('',#1341,#1345,#422,.T.);+#1345=VERTEX_POINT('',#1346);+#1346=CARTESIAN_POINT('',(-3.675,-3.38,1.575));+#1347=ORIENTED_EDGE('',*,*,#1348,.T.);+#1348=EDGE_CURVE('',#1345,#1349,#422,.T.);+#1349=VERTEX_POINT('',#1350);+#1350=CARTESIAN_POINT('',(-3.675,-2.97,1.575));+#1351=ORIENTED_EDGE('',*,*,#1352,.T.);+#1352=EDGE_CURVE('',#1349,#1353,#422,.T.);+#1353=VERTEX_POINT('',#1354);+#1354=CARTESIAN_POINT('',(-3.675,-2.11,1.575));+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1353,#1357,#422,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(-3.675,-1.7,1.575));+#1359=ORIENTED_EDGE('',*,*,#1360,.T.);+#1360=EDGE_CURVE('',#1357,#1361,#422,.T.);+#1361=VERTEX_POINT('',#1362);+#1362=CARTESIAN_POINT('',(-3.675,-0.84,1.575));+#1363=ORIENTED_EDGE('',*,*,#1364,.T.);+#1364=EDGE_CURVE('',#1361,#1365,#422,.T.);+#1365=VERTEX_POINT('',#1366);+#1366=CARTESIAN_POINT('',(-3.675,-0.43,1.575));+#1367=ORIENTED_EDGE('',*,*,#1368,.T.);+#1368=EDGE_CURVE('',#1365,#1369,#422,.T.);+#1369=VERTEX_POINT('',#1370);+#1370=CARTESIAN_POINT('',(-3.675,0.43,1.575));+#1371=ORIENTED_EDGE('',*,*,#1372,.T.);+#1372=EDGE_CURVE('',#1369,#1373,#422,.T.);+#1373=VERTEX_POINT('',#1374);+#1374=CARTESIAN_POINT('',(-3.675,0.84,1.575));+#1375=ORIENTED_EDGE('',*,*,#1376,.T.);+#1376=EDGE_CURVE('',#1373,#1377,#422,.T.);+#1377=VERTEX_POINT('',#1378);+#1378=CARTESIAN_POINT('',(-3.675,1.7,1.575));+#1379=ORIENTED_EDGE('',*,*,#1380,.T.);+#1380=EDGE_CURVE('',#1377,#1381,#422,.T.);+#1381=VERTEX_POINT('',#1382);+#1382=CARTESIAN_POINT('',(-3.675,2.11,1.575));+#1383=ORIENTED_EDGE('',*,*,#1384,.T.);+#1384=EDGE_CURVE('',#1381,#1385,#422,.T.);+#1385=VERTEX_POINT('',#1386);+#1386=CARTESIAN_POINT('',(-3.675,2.97,1.575));+#1387=ORIENTED_EDGE('',*,*,#1388,.T.);+#1388=EDGE_CURVE('',#1385,#1389,#422,.T.);+#1389=VERTEX_POINT('',#1390);+#1390=CARTESIAN_POINT('',(-3.675,3.38,1.575));+#1391=ORIENTED_EDGE('',*,*,#1392,.T.);+#1392=EDGE_CURVE('',#1389,#1393,#422,.T.);+#1393=VERTEX_POINT('',#1394);+#1394=CARTESIAN_POINT('',(-3.675,4.24,1.575));+#1395=ORIENTED_EDGE('',*,*,#1396,.T.);+#1396=EDGE_CURVE('',#1393,#1397,#422,.T.);+#1397=VERTEX_POINT('',#1398);+#1398=CARTESIAN_POINT('',(-3.675,4.65,1.575));+#1399=ORIENTED_EDGE('',*,*,#1400,.T.);+#1400=EDGE_CURVE('',#1397,#1316,#422,.T.);+#1401=ORIENTED_EDGE('',*,*,#1315,.T.);+#1402=ORIENTED_EDGE('',*,*,#419,.T.);+#1403=ORIENTED_EDGE('',*,*,#1404,.T.);+#1404=EDGE_CURVE('',#415,#1405,#1407,.T.);+#1405=VERTEX_POINT('',#1406);+#1406=CARTESIAN_POINT('',(-3.488898282619,6.094449141309,2.75));+#1407=B_SPLINE_CURVE_WITH_KNOTS('',1,(#416,#1406),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1408=ORIENTED_EDGE('',*,*,#1409,.F.);+#1409=EDGE_CURVE('',#1410,#1405,#1412,.T.);+#1410=VERTEX_POINT('',#1411);+#1411=CARTESIAN_POINT('',(-3.488898282619,-6.094449141309,2.75));+#1412=LINE('',#1411,#86);+#1413=ORIENTED_EDGE('',*,*,#1414,.F.);+#1414=EDGE_CURVE('',#1328,#1410,#1415,.T.);+#1415=B_SPLINE_CURVE_WITH_KNOTS('',1,(#423,#1411),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1416=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#423,#1411),(#416,#1406)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,12.375),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1417=ADVANCED_FACE('',(#1418),#1430,.F.);+#1418=FACE_BOUND('',#1419,.F.);+#1419=EDGE_LOOP('',(#1420,#1421,#1426,#1429));+#1420=ORIENTED_EDGE('',*,*,#414,.T.);+#1421=ORIENTED_EDGE('',*,*,#1422,.T.);+#1422=EDGE_CURVE('',#410,#1423,#1425,.T.);+#1423=VERTEX_POINT('',#1424);+#1424=CARTESIAN_POINT('',(-3.444449141309,6.138898282619,2.75));+#1425=B_SPLINE_CURVE_WITH_KNOTS('',1,(#411,#1424),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1426=ORIENTED_EDGE('',*,*,#1427,.F.);+#1427=EDGE_CURVE('',#1405,#1423,#1428,.T.);+#1428=LINE('',#1406,#91);+#1429=ORIENTED_EDGE('',*,*,#1404,.F.);+#1430=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#416,#1406),(#411,#1424)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1431=ADVANCED_FACE('',(#1432),#1444,.F.);+#1432=FACE_BOUND('',#1433,.F.);+#1433=EDGE_LOOP('',(#1434,#1435,#1440,#1443));+#1434=ORIENTED_EDGE('',*,*,#409,.T.);+#1435=ORIENTED_EDGE('',*,*,#1436,.T.);+#1436=EDGE_CURVE('',#405,#1437,#1439,.T.);+#1437=VERTEX_POINT('',#1438);+#1438=CARTESIAN_POINT('',(3.444449141309,6.138898282619,2.75));+#1439=B_SPLINE_CURVE_WITH_KNOTS('',1,(#406,#1438),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1440=ORIENTED_EDGE('',*,*,#1441,.F.);+#1441=EDGE_CURVE('',#1423,#1437,#1442,.T.);+#1442=LINE('',#1424,#27);+#1443=ORIENTED_EDGE('',*,*,#1422,.F.);+#1444=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#411,#1424),(#406,#1438)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1445=ADVANCED_FACE('',(#1446),#1458,.F.);+#1446=FACE_BOUND('',#1447,.F.);+#1447=EDGE_LOOP('',(#1448,#1449,#1454,#1457));+#1448=ORIENTED_EDGE('',*,*,#404,.T.);+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#400,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(3.488898282619,6.094449141309,2.75));+#1453=B_SPLINE_CURVE_WITH_KNOTS('',1,(#401,#1452),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1454=ORIENTED_EDGE('',*,*,#1455,.F.);+#1455=EDGE_CURVE('',#1437,#1451,#1456,.T.);+#1456=LINE('',#1438,#51);+#1457=ORIENTED_EDGE('',*,*,#1436,.F.);+#1458=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#406,#1438),(#401,#1452)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1459=ADVANCED_FACE('',(#1460),#1552,.F.);+#1460=FACE_BOUND('',#1461,.F.);+#1461=EDGE_LOOP('',(#1462,#1463,#1467,#1471,#1475,#1479,#1483,#1487,#1491,#1495,#1499,#1503,#1507,#1511,#1515,#1519,#1523,#1527,#1531,#1535,#1539,#1543,#1548,#1551));+#1462=ORIENTED_EDGE('',*,*,#399,.T.);+#1463=ORIENTED_EDGE('',*,*,#1464,.T.);+#1464=EDGE_CURVE('',#394,#1465,#402,.T.);+#1465=VERTEX_POINT('',#1466);+#1466=CARTESIAN_POINT('',(3.675,5.51,1.575));+#1467=ORIENTED_EDGE('',*,*,#1468,.T.);+#1468=EDGE_CURVE('',#1465,#1469,#402,.T.);+#1469=VERTEX_POINT('',#1470);+#1470=CARTESIAN_POINT('',(3.675,4.65,1.575));+#1471=ORIENTED_EDGE('',*,*,#1472,.T.);+#1472=EDGE_CURVE('',#1469,#1473,#402,.T.);+#1473=VERTEX_POINT('',#1474);+#1474=CARTESIAN_POINT('',(3.675,4.24,1.575));+#1475=ORIENTED_EDGE('',*,*,#1476,.T.);+#1476=EDGE_CURVE('',#1473,#1477,#402,.T.);+#1477=VERTEX_POINT('',#1478);+#1478=CARTESIAN_POINT('',(3.675,3.38,1.575));+#1479=ORIENTED_EDGE('',*,*,#1480,.T.);+#1480=EDGE_CURVE('',#1477,#1481,#402,.T.);+#1481=VERTEX_POINT('',#1482);+#1482=CARTESIAN_POINT('',(3.675,2.97,1.575));+#1483=ORIENTED_EDGE('',*,*,#1484,.T.);+#1484=EDGE_CURVE('',#1481,#1485,#402,.T.);+#1485=VERTEX_POINT('',#1486);+#1486=CARTESIAN_POINT('',(3.675,2.11,1.575));+#1487=ORIENTED_EDGE('',*,*,#1488,.T.);+#1488=EDGE_CURVE('',#1485,#1489,#402,.T.);+#1489=VERTEX_POINT('',#1490);+#1490=CARTESIAN_POINT('',(3.675,1.7,1.575));+#1491=ORIENTED_EDGE('',*,*,#1492,.T.);+#1492=EDGE_CURVE('',#1489,#1493,#402,.T.);+#1493=VERTEX_POINT('',#1494);+#1494=CARTESIAN_POINT('',(3.675,0.84,1.575));+#1495=ORIENTED_EDGE('',*,*,#1496,.T.);+#1496=EDGE_CURVE('',#1493,#1497,#402,.T.);+#1497=VERTEX_POINT('',#1498);+#1498=CARTESIAN_POINT('',(3.675,0.43,1.575));+#1499=ORIENTED_EDGE('',*,*,#1500,.T.);+#1500=EDGE_CURVE('',#1497,#1501,#402,.T.);+#1501=VERTEX_POINT('',#1502);+#1502=CARTESIAN_POINT('',(3.675,-0.43,1.575));+#1503=ORIENTED_EDGE('',*,*,#1504,.T.);+#1504=EDGE_CURVE('',#1501,#1505,#402,.T.);+#1505=VERTEX_POINT('',#1506);+#1506=CARTESIAN_POINT('',(3.675,-0.84,1.575));+#1507=ORIENTED_EDGE('',*,*,#1508,.T.);+#1508=EDGE_CURVE('',#1505,#1509,#402,.T.);+#1509=VERTEX_POINT('',#1510);+#1510=CARTESIAN_POINT('',(3.675,-1.7,1.575));+#1511=ORIENTED_EDGE('',*,*,#1512,.T.);+#1512=EDGE_CURVE('',#1509,#1513,#402,.T.);+#1513=VERTEX_POINT('',#1514);+#1514=CARTESIAN_POINT('',(3.675,-2.11,1.575));+#1515=ORIENTED_EDGE('',*,*,#1516,.T.);+#1516=EDGE_CURVE('',#1513,#1517,#402,.T.);+#1517=VERTEX_POINT('',#1518);+#1518=CARTESIAN_POINT('',(3.675,-2.97,1.575));+#1519=ORIENTED_EDGE('',*,*,#1520,.T.);+#1520=EDGE_CURVE('',#1517,#1521,#402,.T.);+#1521=VERTEX_POINT('',#1522);+#1522=CARTESIAN_POINT('',(3.675,-3.38,1.575));+#1523=ORIENTED_EDGE('',*,*,#1524,.T.);+#1524=EDGE_CURVE('',#1521,#1525,#402,.T.);+#1525=VERTEX_POINT('',#1526);+#1526=CARTESIAN_POINT('',(3.675,-4.24,1.575));+#1527=ORIENTED_EDGE('',*,*,#1528,.T.);+#1528=EDGE_CURVE('',#1525,#1529,#402,.T.);+#1529=VERTEX_POINT('',#1530);+#1530=CARTESIAN_POINT('',(3.675,-4.65,1.575));+#1531=ORIENTED_EDGE('',*,*,#1532,.T.);+#1532=EDGE_CURVE('',#1529,#1533,#402,.T.);+#1533=VERTEX_POINT('',#1534);+#1534=CARTESIAN_POINT('',(3.675,-5.51,1.575));+#1535=ORIENTED_EDGE('',*,*,#1536,.T.);+#1536=EDGE_CURVE('',#1533,#1537,#402,.T.);+#1537=VERTEX_POINT('',#1538);+#1538=CARTESIAN_POINT('',(3.675,-5.92,1.575));+#1539=ORIENTED_EDGE('',*,*,#1540,.T.);+#1540=EDGE_CURVE('',#1537,#1541,#402,.T.);+#1541=VERTEX_POINT('',#1542);+#1542=CARTESIAN_POINT('',(3.675,-6.1875,1.575));+#1543=ORIENTED_EDGE('',*,*,#1544,.T.);+#1544=EDGE_CURVE('',#1541,#1545,#1547,.T.);+#1545=VERTEX_POINT('',#1546);+#1546=CARTESIAN_POINT('',(3.488898282619,-6.094449141309,2.75));+#1547=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1542,#1546),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1548=ORIENTED_EDGE('',*,*,#1549,.F.);+#1549=EDGE_CURVE('',#1451,#1545,#1550,.T.);+#1550=LINE('',#1452,#58);+#1551=ORIENTED_EDGE('',*,*,#1450,.F.);+#1552=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#401,#1452),(#1542,#1546)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,12.375),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1553=ADVANCED_FACE('',(#1554),#1571,.F.);+#1554=FACE_BOUND('',#1555,.F.);+#1555=EDGE_LOOP('',(#1556,#1559,#1564,#1567,#1569,#1570));+#1556=ORIENTED_EDGE('',*,*,#1557,.F.);+#1557=EDGE_CURVE('',#1558,#389,#396,.T.);+#1558=VERTEX_POINT('',#397);+#1559=ORIENTED_EDGE('',*,*,#1560,.T.);+#1560=EDGE_CURVE('',#1558,#1561,#1563,.T.);+#1561=VERTEX_POINT('',#1562);+#1562=CARTESIAN_POINT('',(4.,5.51,1.575));+#1563=LINE('',#397,#58);+#1564=ORIENTED_EDGE('',*,*,#1565,.T.);+#1565=EDGE_CURVE('',#1561,#895,#1566,.T.);+#1566=LINE('',#1562,#72);+#1567=ORIENTED_EDGE('',*,*,#1568,.T.);+#1568=EDGE_CURVE('',#895,#1465,#1566,.T.);+#1569=ORIENTED_EDGE('',*,*,#1464,.F.);+#1570=ORIENTED_EDGE('',*,*,#393,.F.);+#1571=PLANE('',#1572);+#1572=AXIS2_PLACEMENT_3D('',#397,#1322,#73);+#1573=ADVANCED_FACE('',(#1574),#436,.F.);+#1574=FACE_BOUND('',#1575,.F.);+#1575=EDGE_LOOP('',(#1576,#1577,#1581,#1582,#1587,#1592,#1595,#1596,#1600,#1601,#1602,#1603));+#1576=ORIENTED_EDGE('',*,*,#468,.T.);+#1577=ORIENTED_EDGE('',*,*,#1578,.T.);+#1578=EDGE_CURVE('',#462,#1329,#1579,.T.);+#1579=LINE('',#1580,#430);+#1580=CARTESIAN_POINT('',(-4.,-5.92,1.575));+#1581=ORIENTED_EDGE('',*,*,#1327,.F.);+#1582=ORIENTED_EDGE('',*,*,#1583,.F.);+#1583=EDGE_CURVE('',#1584,#1328,#1586,.T.);+#1584=VERTEX_POINT('',#1585);+#1585=CARTESIAN_POINT('',(-3.5375,-6.325,1.575));+#1586=LINE('',#1585,#79);+#1587=ORIENTED_EDGE('',*,*,#1588,.F.);+#1588=EDGE_CURVE('',#1589,#1584,#1591,.T.);+#1589=VERTEX_POINT('',#1590);+#1590=CARTESIAN_POINT('',(3.5375,-6.325,1.575));+#1591=LINE('',#1590,#72);+#1592=ORIENTED_EDGE('',*,*,#1593,.F.);+#1593=EDGE_CURVE('',#1541,#1589,#1594,.T.);+#1594=LINE('',#1542,#65);+#1595=ORIENTED_EDGE('',*,*,#1540,.F.);+#1596=ORIENTED_EDGE('',*,*,#1597,.F.);+#1597=EDGE_CURVE('',#1246,#1537,#1598,.T.);+#1598=LINE('',#1599,#72);+#1599=CARTESIAN_POINT('',(4.,-5.92,1.575));+#1600=ORIENTED_EDGE('',*,*,#1257,.T.);+#1601=ORIENTED_EDGE('',*,*,#1283,.T.);+#1602=ORIENTED_EDGE('',*,*,#1294,.T.);+#1603=ORIENTED_EDGE('',*,*,#1264,.T.);+#1604=ADVANCED_FACE('',(#1605),#1672,.F.);+#1605=FACE_BOUND('',#1606,.F.);+#1606=EDGE_LOOP('',(#1607,#1608,#1609,#1618,#1625,#1633,#1638,#1643,#1648,#1656,#1663,#1670));+#1607=ORIENTED_EDGE('',*,*,#461,.F.);+#1608=ORIENTED_EDGE('',*,*,#475,.T.);+#1609=ORIENTED_EDGE('',*,*,#1610,.T.);+#1610=EDGE_CURVE('',#476,#1611,#1613,.T.);+#1611=VERTEX_POINT('',#1612);+#1612=CARTESIAN_POINT('',(-4.098480775301,-5.92,1.292364817767));+#1613=CIRCLE('',#1614,1.E-01);+#1614=AXIS2_PLACEMENT_3D('',#1615,#1616,#1617);+#1615=CARTESIAN_POINT('',(-4.,-5.92,1.275));+#1616=DIRECTION('',(-1.144237745222E-17,-1.,6.568586551523E-47));+#1617=DIRECTION('',(8.881784197001E-15,-1.016287272312E-31,1.));+#1618=ORIENTED_EDGE('',*,*,#1619,.T.);+#1619=EDGE_CURVE('',#1611,#1620,#1622,.T.);+#1620=VERTEX_POINT('',#1621);+#1621=CARTESIAN_POINT('',(-4.276476480287,-5.92,0.2479055467));+#1622=LINE('',#1612,#1623);+#1623=VECTOR('',#1624,1.);+#1624=DIRECTION('',(-0.167996923731,1.922284212136E-18,-0.985787519508));+#1625=ORIENTED_EDGE('',*,*,#1626,.T.);+#1626=EDGE_CURVE('',#1620,#1627,#1629,.T.);+#1627=VERTEX_POINT('',#1628);+#1628=CARTESIAN_POINT('',(-4.571918806191,-5.92,-2.22044604925E-16));+#1629=CIRCLE('',#1630,0.3);+#1630=AXIS2_PLACEMENT_3D('',#1631,#493,#1632);+#1631=CARTESIAN_POINT('',(-4.571918806191,-5.92,0.3));+#1632=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#1633=ORIENTED_EDGE('',*,*,#1634,.T.);+#1634=EDGE_CURVE('',#1627,#1635,#1637,.T.);+#1635=VERTEX_POINT('',#1636);+#1636=CARTESIAN_POINT('',(-5.15,-5.92,-2.22044604925E-16));+#1637=LINE('',#1628,#480);+#1638=ORIENTED_EDGE('',*,*,#1639,.T.);+#1639=EDGE_CURVE('',#1635,#1640,#1642,.T.);+#1640=VERTEX_POINT('',#1641);+#1641=CARTESIAN_POINT('',(-5.15,-5.92,0.2));+#1642=LINE('',#1636,#466);+#1643=ORIENTED_EDGE('',*,*,#1644,.T.);+#1644=EDGE_CURVE('',#1640,#1645,#1647,.T.);+#1645=VERTEX_POINT('',#1646);+#1646=CARTESIAN_POINT('',(-4.571918806191,-5.92,0.2));+#1647=LINE('',#1641,#430);+#1648=ORIENTED_EDGE('',*,*,#1649,.T.);+#1649=EDGE_CURVE('',#1645,#1650,#1652,.T.);+#1650=VERTEX_POINT('',#1651);+#1651=CARTESIAN_POINT('',(-4.47343803089,-5.92,0.282635182233));+#1652=CIRCLE('',#1653,1.E-01);+#1653=AXIS2_PLACEMENT_3D('',#1631,#1654,#1655);+#1654=DIRECTION('',(-1.144237745222E-17,-1.,2.189528850508E-47));+#1655=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#1656=ORIENTED_EDGE('',*,*,#1657,.T.);+#1657=EDGE_CURVE('',#1650,#1658,#1660,.T.);+#1658=VERTEX_POINT('',#1659);+#1659=CARTESIAN_POINT('',(-4.295442325904,-5.92,1.3270944533));+#1660=LINE('',#1651,#1661);+#1661=VECTOR('',#1662,1.);+#1662=DIRECTION('',(0.167996923731,-1.922284212136E-18,0.985787519508));+#1663=ORIENTED_EDGE('',*,*,#1664,.T.);+#1664=EDGE_CURVE('',#1658,#1665,#1666,.T.);+#1665=VERTEX_POINT('',#1580);+#1666=CIRCLE('',#1667,0.3);+#1667=AXIS2_PLACEMENT_3D('',#1615,#1668,#1669);+#1668=DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1669=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#1670=ORIENTED_EDGE('',*,*,#1671,.T.);+#1671=EDGE_CURVE('',#1665,#462,#1579,.T.);+#1672=PLANE('',#1673);+#1673=AXIS2_PLACEMENT_3D('',#1674,#493,#13);+#1674=CARTESIAN_POINT('',(-4.341787690374,-5.92,0.743634917138));+#1675=ADVANCED_FACE('',(#1676),#1690,.F.);+#1676=FACE_BOUND('',#1677,.F.);+#1677=EDGE_LOOP('',(#1678,#1679,#1686,#1689));+#1678=ORIENTED_EDGE('',*,*,#490,.T.);+#1679=ORIENTED_EDGE('',*,*,#1680,.T.);+#1680=EDGE_CURVE('',#485,#1681,#1683,.T.);+#1681=VERTEX_POINT('',#1682);+#1682=CARTESIAN_POINT('',(-4.098480775301,-5.51,1.292364817767));+#1683=CIRCLE('',#1684,1.E-01);+#1684=AXIS2_PLACEMENT_3D('',#1685,#1616,#1617);+#1685=CARTESIAN_POINT('',(-4.,-5.51,1.275));+#1686=ORIENTED_EDGE('',*,*,#1687,.F.);+#1687=EDGE_CURVE('',#1611,#1681,#1688,.T.);+#1688=LINE('',#1612,#492);+#1689=ORIENTED_EDGE('',*,*,#1610,.F.);+#1690=CYLINDRICAL_SURFACE('',#1691,1.E-01);+#1691=AXIS2_PLACEMENT_3D('',#1615,#1692,#1617);+#1692=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1693=ADVANCED_FACE('',(#1694),#1743,.T.);+#1694=FACE_BOUND('',#1695,.T.);+#1695=EDGE_LOOP('',(#499,#483,#1679,#1696,#1701,#1708,#1713,#1718,#1723,#1729,#1734,#1740));+#1696=ORIENTED_EDGE('',*,*,#1697,.T.);+#1697=EDGE_CURVE('',#1681,#1698,#1700,.T.);+#1698=VERTEX_POINT('',#1699);+#1699=CARTESIAN_POINT('',(-4.276476480287,-5.51,0.2479055467));+#1700=LINE('',#1682,#1623);+#1701=ORIENTED_EDGE('',*,*,#1702,.T.);+#1702=EDGE_CURVE('',#1698,#1703,#1705,.T.);+#1703=VERTEX_POINT('',#1704);+#1704=CARTESIAN_POINT('',(-4.571918806191,-5.51,-2.22044604925E-16));+#1705=CIRCLE('',#1706,0.3);+#1706=AXIS2_PLACEMENT_3D('',#1707,#493,#1632);+#1707=CARTESIAN_POINT('',(-4.571918806191,-5.51,0.3));+#1708=ORIENTED_EDGE('',*,*,#1709,.T.);+#1709=EDGE_CURVE('',#1703,#1710,#1712,.T.);+#1710=VERTEX_POINT('',#1711);+#1711=CARTESIAN_POINT('',(-5.15,-5.51,-2.22044604925E-16));+#1712=LINE('',#1704,#480);+#1713=ORIENTED_EDGE('',*,*,#1714,.T.);+#1714=EDGE_CURVE('',#1710,#1715,#1717,.T.);+#1715=VERTEX_POINT('',#1716);+#1716=CARTESIAN_POINT('',(-5.15,-5.51,0.2));+#1717=LINE('',#1711,#466);+#1718=ORIENTED_EDGE('',*,*,#1719,.T.);+#1719=EDGE_CURVE('',#1715,#1720,#1722,.T.);+#1720=VERTEX_POINT('',#1721);+#1721=CARTESIAN_POINT('',(-4.571918806191,-5.51,0.2));+#1722=LINE('',#1716,#430);+#1723=ORIENTED_EDGE('',*,*,#1724,.T.);+#1724=EDGE_CURVE('',#1720,#1725,#1727,.T.);+#1725=VERTEX_POINT('',#1726);+#1726=CARTESIAN_POINT('',(-4.47343803089,-5.51,0.282635182233));+#1727=CIRCLE('',#1728,1.E-01);+#1728=AXIS2_PLACEMENT_3D('',#1707,#1654,#1655);+#1729=ORIENTED_EDGE('',*,*,#1730,.T.);+#1730=EDGE_CURVE('',#1725,#1731,#1733,.T.);+#1731=VERTEX_POINT('',#1732);+#1732=CARTESIAN_POINT('',(-4.295442325904,-5.51,1.3270944533));+#1733=LINE('',#1726,#1661);+#1734=ORIENTED_EDGE('',*,*,#1735,.T.);+#1735=EDGE_CURVE('',#1731,#1736,#1738,.T.);+#1736=VERTEX_POINT('',#1737);+#1737=CARTESIAN_POINT('',(-4.,-5.51,1.575));+#1738=CIRCLE('',#1739,0.3);+#1739=AXIS2_PLACEMENT_3D('',#1685,#1668,#1669);+#1740=ORIENTED_EDGE('',*,*,#1741,.T.);+#1741=EDGE_CURVE('',#1736,#501,#1742,.T.);+#1742=LINE('',#1737,#430);+#1743=PLANE('',#1744);+#1744=AXIS2_PLACEMENT_3D('',#1745,#493,#13);+#1745=CARTESIAN_POINT('',(-4.341787690374,-5.51,0.743634917138));+#1746=ADVANCED_FACE('',(#1747),#436,.F.);+#1747=FACE_BOUND('',#1748,.F.);+#1748=EDGE_LOOP('',(#1749,#1750,#1754,#1755));+#1749=ORIENTED_EDGE('',*,*,#513,.T.);+#1750=ORIENTED_EDGE('',*,*,#1751,.T.);+#1751=EDGE_CURVE('',#508,#1337,#1752,.T.);+#1752=LINE('',#1753,#430);+#1753=CARTESIAN_POINT('',(-4.,-4.65,1.575));+#1754=ORIENTED_EDGE('',*,*,#1336,.F.);+#1755=ORIENTED_EDGE('',*,*,#1756,.F.);+#1756=EDGE_CURVE('',#501,#1333,#1742,.T.);+#1757=ADVANCED_FACE('',(#1758),#1814,.F.);+#1758=FACE_BOUND('',#1759,.F.);+#1759=EDGE_LOOP('',(#1760,#1761,#1762,#1769,#1774,#1781,#1786,#1791,#1796,#1802,#1807,#1812));+#1760=ORIENTED_EDGE('',*,*,#507,.F.);+#1761=ORIENTED_EDGE('',*,*,#518,.T.);+#1762=ORIENTED_EDGE('',*,*,#1763,.T.);+#1763=EDGE_CURVE('',#519,#1764,#1766,.T.);+#1764=VERTEX_POINT('',#1765);+#1765=CARTESIAN_POINT('',(-4.098480775301,-4.65,1.292364817767));+#1766=CIRCLE('',#1767,1.E-01);+#1767=AXIS2_PLACEMENT_3D('',#1768,#1616,#1617);+#1768=CARTESIAN_POINT('',(-4.,-4.65,1.275));+#1769=ORIENTED_EDGE('',*,*,#1770,.T.);+#1770=EDGE_CURVE('',#1764,#1771,#1773,.T.);+#1771=VERTEX_POINT('',#1772);+#1772=CARTESIAN_POINT('',(-4.276476480287,-4.65,0.2479055467));+#1773=LINE('',#1765,#1623);+#1774=ORIENTED_EDGE('',*,*,#1775,.T.);+#1775=EDGE_CURVE('',#1771,#1776,#1778,.T.);+#1776=VERTEX_POINT('',#1777);+#1777=CARTESIAN_POINT('',(-4.571918806191,-4.65,-2.22044604925E-16));+#1778=CIRCLE('',#1779,0.3);+#1779=AXIS2_PLACEMENT_3D('',#1780,#493,#1632);+#1780=CARTESIAN_POINT('',(-4.571918806191,-4.65,0.3));+#1781=ORIENTED_EDGE('',*,*,#1782,.T.);+#1782=EDGE_CURVE('',#1776,#1783,#1785,.T.);+#1783=VERTEX_POINT('',#1784);+#1784=CARTESIAN_POINT('',(-5.15,-4.65,-2.22044604925E-16));+#1785=LINE('',#1777,#480);+#1786=ORIENTED_EDGE('',*,*,#1787,.T.);+#1787=EDGE_CURVE('',#1783,#1788,#1790,.T.);+#1788=VERTEX_POINT('',#1789);+#1789=CARTESIAN_POINT('',(-5.15,-4.65,0.2));+#1790=LINE('',#1784,#466);+#1791=ORIENTED_EDGE('',*,*,#1792,.T.);+#1792=EDGE_CURVE('',#1788,#1793,#1795,.T.);+#1793=VERTEX_POINT('',#1794);+#1794=CARTESIAN_POINT('',(-4.571918806191,-4.65,0.2));+#1795=LINE('',#1789,#430);+#1796=ORIENTED_EDGE('',*,*,#1797,.T.);+#1797=EDGE_CURVE('',#1793,#1798,#1800,.T.);+#1798=VERTEX_POINT('',#1799);+#1799=CARTESIAN_POINT('',(-4.47343803089,-4.65,0.282635182233));+#1800=CIRCLE('',#1801,1.E-01);+#1801=AXIS2_PLACEMENT_3D('',#1780,#1654,#1655);+#1802=ORIENTED_EDGE('',*,*,#1803,.T.);+#1803=EDGE_CURVE('',#1798,#1804,#1806,.T.);+#1804=VERTEX_POINT('',#1805);+#1805=CARTESIAN_POINT('',(-4.295442325904,-4.65,1.3270944533));+#1806=LINE('',#1799,#1661);+#1807=ORIENTED_EDGE('',*,*,#1808,.T.);+#1808=EDGE_CURVE('',#1804,#1809,#1810,.T.);+#1809=VERTEX_POINT('',#1753);+#1810=CIRCLE('',#1811,0.3);+#1811=AXIS2_PLACEMENT_3D('',#1768,#1668,#1669);+#1812=ORIENTED_EDGE('',*,*,#1813,.T.);+#1813=EDGE_CURVE('',#1809,#508,#1752,.T.);+#1814=PLANE('',#1815);+#1815=AXIS2_PLACEMENT_3D('',#1816,#493,#13);+#1816=CARTESIAN_POINT('',(-4.341787690374,-4.65,0.743634917138));+#1817=ADVANCED_FACE('',(#1818),#1832,.F.);+#1818=FACE_BOUND('',#1819,.F.);+#1819=EDGE_LOOP('',(#1820,#1821,#1828,#1831));+#1820=ORIENTED_EDGE('',*,*,#531,.T.);+#1821=ORIENTED_EDGE('',*,*,#1822,.T.);+#1822=EDGE_CURVE('',#526,#1823,#1825,.T.);+#1823=VERTEX_POINT('',#1824);+#1824=CARTESIAN_POINT('',(-4.098480775301,-4.24,1.292364817767));+#1825=CIRCLE('',#1826,1.E-01);+#1826=AXIS2_PLACEMENT_3D('',#1827,#1616,#1617);+#1827=CARTESIAN_POINT('',(-4.,-4.24,1.275));+#1828=ORIENTED_EDGE('',*,*,#1829,.F.);+#1829=EDGE_CURVE('',#1764,#1823,#1830,.T.);+#1830=LINE('',#1765,#492);+#1831=ORIENTED_EDGE('',*,*,#1763,.F.);+#1832=CYLINDRICAL_SURFACE('',#1833,1.E-01);+#1833=AXIS2_PLACEMENT_3D('',#1768,#1692,#1617);+#1834=ADVANCED_FACE('',(#1835),#1884,.T.);+#1835=FACE_BOUND('',#1836,.T.);+#1836=EDGE_LOOP('',(#538,#524,#1821,#1837,#1842,#1849,#1854,#1859,#1864,#1870,#1875,#1881));+#1837=ORIENTED_EDGE('',*,*,#1838,.T.);+#1838=EDGE_CURVE('',#1823,#1839,#1841,.T.);+#1839=VERTEX_POINT('',#1840);+#1840=CARTESIAN_POINT('',(-4.276476480287,-4.24,0.2479055467));+#1841=LINE('',#1824,#1623);+#1842=ORIENTED_EDGE('',*,*,#1843,.T.);+#1843=EDGE_CURVE('',#1839,#1844,#1846,.T.);+#1844=VERTEX_POINT('',#1845);+#1845=CARTESIAN_POINT('',(-4.571918806191,-4.24,-2.22044604925E-16));+#1846=CIRCLE('',#1847,0.3);+#1847=AXIS2_PLACEMENT_3D('',#1848,#493,#1632);+#1848=CARTESIAN_POINT('',(-4.571918806191,-4.24,0.3));+#1849=ORIENTED_EDGE('',*,*,#1850,.T.);+#1850=EDGE_CURVE('',#1844,#1851,#1853,.T.);+#1851=VERTEX_POINT('',#1852);+#1852=CARTESIAN_POINT('',(-5.15,-4.24,-2.22044604925E-16));+#1853=LINE('',#1845,#480);+#1854=ORIENTED_EDGE('',*,*,#1855,.T.);+#1855=EDGE_CURVE('',#1851,#1856,#1858,.T.);+#1856=VERTEX_POINT('',#1857);+#1857=CARTESIAN_POINT('',(-5.15,-4.24,0.2));+#1858=LINE('',#1852,#466);+#1859=ORIENTED_EDGE('',*,*,#1860,.T.);+#1860=EDGE_CURVE('',#1856,#1861,#1863,.T.);+#1861=VERTEX_POINT('',#1862);+#1862=CARTESIAN_POINT('',(-4.571918806191,-4.24,0.2));+#1863=LINE('',#1857,#430);+#1864=ORIENTED_EDGE('',*,*,#1865,.T.);+#1865=EDGE_CURVE('',#1861,#1866,#1868,.T.);+#1866=VERTEX_POINT('',#1867);+#1867=CARTESIAN_POINT('',(-4.47343803089,-4.24,0.282635182233));+#1868=CIRCLE('',#1869,1.E-01);+#1869=AXIS2_PLACEMENT_3D('',#1848,#1654,#1655);+#1870=ORIENTED_EDGE('',*,*,#1871,.T.);+#1871=EDGE_CURVE('',#1866,#1872,#1874,.T.);+#1872=VERTEX_POINT('',#1873);+#1873=CARTESIAN_POINT('',(-4.295442325904,-4.24,1.3270944533));+#1874=LINE('',#1867,#1661);+#1875=ORIENTED_EDGE('',*,*,#1876,.T.);+#1876=EDGE_CURVE('',#1872,#1877,#1879,.T.);+#1877=VERTEX_POINT('',#1878);+#1878=CARTESIAN_POINT('',(-4.,-4.24,1.575));+#1879=CIRCLE('',#1880,0.3);+#1880=AXIS2_PLACEMENT_3D('',#1827,#1668,#1669);+#1881=ORIENTED_EDGE('',*,*,#1882,.T.);+#1882=EDGE_CURVE('',#1877,#540,#1883,.T.);+#1883=LINE('',#1878,#430);+#1884=PLANE('',#1885);+#1885=AXIS2_PLACEMENT_3D('',#1886,#493,#13);+#1886=CARTESIAN_POINT('',(-4.341787690374,-4.24,0.743634917138));+#1887=ADVANCED_FACE('',(#1888),#436,.F.);+#1888=FACE_BOUND('',#1889,.F.);+#1889=EDGE_LOOP('',(#1890,#1891,#1895,#1896));+#1890=ORIENTED_EDGE('',*,*,#552,.T.);+#1891=ORIENTED_EDGE('',*,*,#1892,.T.);+#1892=EDGE_CURVE('',#547,#1345,#1893,.T.);+#1893=LINE('',#1894,#430);+#1894=CARTESIAN_POINT('',(-4.,-3.38,1.575));+#1895=ORIENTED_EDGE('',*,*,#1344,.F.);+#1896=ORIENTED_EDGE('',*,*,#1897,.F.);+#1897=EDGE_CURVE('',#540,#1341,#1883,.T.);+#1898=ADVANCED_FACE('',(#1899),#1955,.F.);+#1899=FACE_BOUND('',#1900,.F.);+#1900=EDGE_LOOP('',(#1901,#1902,#1903,#1910,#1915,#1922,#1927,#1932,#1937,#1943,#1948,#1953));+#1901=ORIENTED_EDGE('',*,*,#546,.F.);+#1902=ORIENTED_EDGE('',*,*,#557,.T.);+#1903=ORIENTED_EDGE('',*,*,#1904,.T.);+#1904=EDGE_CURVE('',#558,#1905,#1907,.T.);+#1905=VERTEX_POINT('',#1906);+#1906=CARTESIAN_POINT('',(-4.098480775301,-3.38,1.292364817767));+#1907=CIRCLE('',#1908,1.E-01);+#1908=AXIS2_PLACEMENT_3D('',#1909,#1616,#1617);+#1909=CARTESIAN_POINT('',(-4.,-3.38,1.275));+#1910=ORIENTED_EDGE('',*,*,#1911,.T.);+#1911=EDGE_CURVE('',#1905,#1912,#1914,.T.);+#1912=VERTEX_POINT('',#1913);+#1913=CARTESIAN_POINT('',(-4.276476480287,-3.38,0.2479055467));+#1914=LINE('',#1906,#1623);+#1915=ORIENTED_EDGE('',*,*,#1916,.T.);+#1916=EDGE_CURVE('',#1912,#1917,#1919,.T.);+#1917=VERTEX_POINT('',#1918);+#1918=CARTESIAN_POINT('',(-4.571918806191,-3.38,-2.22044604925E-16));+#1919=CIRCLE('',#1920,0.3);+#1920=AXIS2_PLACEMENT_3D('',#1921,#493,#1632);+#1921=CARTESIAN_POINT('',(-4.571918806191,-3.38,0.3));+#1922=ORIENTED_EDGE('',*,*,#1923,.T.);+#1923=EDGE_CURVE('',#1917,#1924,#1926,.T.);+#1924=VERTEX_POINT('',#1925);+#1925=CARTESIAN_POINT('',(-5.15,-3.38,-2.22044604925E-16));+#1926=LINE('',#1918,#480);+#1927=ORIENTED_EDGE('',*,*,#1928,.T.);+#1928=EDGE_CURVE('',#1924,#1929,#1931,.T.);+#1929=VERTEX_POINT('',#1930);+#1930=CARTESIAN_POINT('',(-5.15,-3.38,0.2));+#1931=LINE('',#1925,#466);+#1932=ORIENTED_EDGE('',*,*,#1933,.T.);+#1933=EDGE_CURVE('',#1929,#1934,#1936,.T.);+#1934=VERTEX_POINT('',#1935);+#1935=CARTESIAN_POINT('',(-4.571918806191,-3.38,0.2));+#1936=LINE('',#1930,#430);+#1937=ORIENTED_EDGE('',*,*,#1938,.T.);+#1938=EDGE_CURVE('',#1934,#1939,#1941,.T.);+#1939=VERTEX_POINT('',#1940);+#1940=CARTESIAN_POINT('',(-4.47343803089,-3.38,0.282635182233));+#1941=CIRCLE('',#1942,1.E-01);+#1942=AXIS2_PLACEMENT_3D('',#1921,#1654,#1655);+#1943=ORIENTED_EDGE('',*,*,#1944,.T.);+#1944=EDGE_CURVE('',#1939,#1945,#1947,.T.);+#1945=VERTEX_POINT('',#1946);+#1946=CARTESIAN_POINT('',(-4.295442325904,-3.38,1.3270944533));+#1947=LINE('',#1940,#1661);+#1948=ORIENTED_EDGE('',*,*,#1949,.T.);+#1949=EDGE_CURVE('',#1945,#1950,#1951,.T.);+#1950=VERTEX_POINT('',#1894);+#1951=CIRCLE('',#1952,0.3);+#1952=AXIS2_PLACEMENT_3D('',#1909,#1668,#1669);+#1953=ORIENTED_EDGE('',*,*,#1954,.T.);+#1954=EDGE_CURVE('',#1950,#547,#1893,.T.);+#1955=PLANE('',#1956);+#1956=AXIS2_PLACEMENT_3D('',#1957,#493,#13);+#1957=CARTESIAN_POINT('',(-4.341787690374,-3.38,0.743634917138));+#1958=ADVANCED_FACE('',(#1959),#1973,.F.);+#1959=FACE_BOUND('',#1960,.F.);+#1960=EDGE_LOOP('',(#1961,#1962,#1969,#1972));+#1961=ORIENTED_EDGE('',*,*,#570,.T.);+#1962=ORIENTED_EDGE('',*,*,#1963,.T.);+#1963=EDGE_CURVE('',#565,#1964,#1966,.T.);+#1964=VERTEX_POINT('',#1965);+#1965=CARTESIAN_POINT('',(-4.098480775301,-2.97,1.292364817767));+#1966=CIRCLE('',#1967,1.E-01);+#1967=AXIS2_PLACEMENT_3D('',#1968,#1616,#1617);+#1968=CARTESIAN_POINT('',(-4.,-2.97,1.275));+#1969=ORIENTED_EDGE('',*,*,#1970,.F.);+#1970=EDGE_CURVE('',#1905,#1964,#1971,.T.);+#1971=LINE('',#1906,#492);+#1972=ORIENTED_EDGE('',*,*,#1904,.F.);+#1973=CYLINDRICAL_SURFACE('',#1974,1.E-01);+#1974=AXIS2_PLACEMENT_3D('',#1909,#1692,#1617);+#1975=ADVANCED_FACE('',(#1976),#2025,.T.);+#1976=FACE_BOUND('',#1977,.T.);+#1977=EDGE_LOOP('',(#577,#563,#1962,#1978,#1983,#1990,#1995,#2000,#2005,#2011,#2016,#2022));+#1978=ORIENTED_EDGE('',*,*,#1979,.T.);+#1979=EDGE_CURVE('',#1964,#1980,#1982,.T.);+#1980=VERTEX_POINT('',#1981);+#1981=CARTESIAN_POINT('',(-4.276476480287,-2.97,0.2479055467));+#1982=LINE('',#1965,#1623);+#1983=ORIENTED_EDGE('',*,*,#1984,.T.);+#1984=EDGE_CURVE('',#1980,#1985,#1987,.T.);+#1985=VERTEX_POINT('',#1986);+#1986=CARTESIAN_POINT('',(-4.571918806191,-2.97,-2.22044604925E-16));+#1987=CIRCLE('',#1988,0.3);+#1988=AXIS2_PLACEMENT_3D('',#1989,#493,#1632);+#1989=CARTESIAN_POINT('',(-4.571918806191,-2.97,0.3));+#1990=ORIENTED_EDGE('',*,*,#1991,.T.);+#1991=EDGE_CURVE('',#1985,#1992,#1994,.T.);+#1992=VERTEX_POINT('',#1993);+#1993=CARTESIAN_POINT('',(-5.15,-2.97,-2.22044604925E-16));+#1994=LINE('',#1986,#480);+#1995=ORIENTED_EDGE('',*,*,#1996,.T.);+#1996=EDGE_CURVE('',#1992,#1997,#1999,.T.);+#1997=VERTEX_POINT('',#1998);+#1998=CARTESIAN_POINT('',(-5.15,-2.97,0.2));+#1999=LINE('',#1993,#466);+#2000=ORIENTED_EDGE('',*,*,#2001,.T.);+#2001=EDGE_CURVE('',#1997,#2002,#2004,.T.);+#2002=VERTEX_POINT('',#2003);+#2003=CARTESIAN_POINT('',(-4.571918806191,-2.97,0.2));+#2004=LINE('',#1998,#430);+#2005=ORIENTED_EDGE('',*,*,#2006,.T.);+#2006=EDGE_CURVE('',#2002,#2007,#2009,.T.);+#2007=VERTEX_POINT('',#2008);+#2008=CARTESIAN_POINT('',(-4.47343803089,-2.97,0.282635182233));+#2009=CIRCLE('',#2010,1.E-01);+#2010=AXIS2_PLACEMENT_3D('',#1989,#1654,#1655);+#2011=ORIENTED_EDGE('',*,*,#2012,.T.);+#2012=EDGE_CURVE('',#2007,#2013,#2015,.T.);+#2013=VERTEX_POINT('',#2014);+#2014=CARTESIAN_POINT('',(-4.295442325904,-2.97,1.3270944533));+#2015=LINE('',#2008,#1661);+#2016=ORIENTED_EDGE('',*,*,#2017,.T.);+#2017=EDGE_CURVE('',#2013,#2018,#2020,.T.);+#2018=VERTEX_POINT('',#2019);+#2019=CARTESIAN_POINT('',(-4.,-2.97,1.575));+#2020=CIRCLE('',#2021,0.3);+#2021=AXIS2_PLACEMENT_3D('',#1968,#1668,#1669);+#2022=ORIENTED_EDGE('',*,*,#2023,.T.);+#2023=EDGE_CURVE('',#2018,#579,#2024,.T.);+#2024=LINE('',#2019,#430);+#2025=PLANE('',#2026);+#2026=AXIS2_PLACEMENT_3D('',#2027,#493,#13);+#2027=CARTESIAN_POINT('',(-4.341787690374,-2.97,0.743634917138));+#2028=ADVANCED_FACE('',(#2029),#436,.F.);+#2029=FACE_BOUND('',#2030,.F.);+#2030=EDGE_LOOP('',(#2031,#2032,#2036,#2037));+#2031=ORIENTED_EDGE('',*,*,#591,.T.);+#2032=ORIENTED_EDGE('',*,*,#2033,.T.);+#2033=EDGE_CURVE('',#586,#1353,#2034,.T.);+#2034=LINE('',#2035,#430);+#2035=CARTESIAN_POINT('',(-4.,-2.11,1.575));+#2036=ORIENTED_EDGE('',*,*,#1352,.F.);+#2037=ORIENTED_EDGE('',*,*,#2038,.F.);+#2038=EDGE_CURVE('',#579,#1349,#2024,.T.);+#2039=ADVANCED_FACE('',(#2040),#2096,.F.);+#2040=FACE_BOUND('',#2041,.F.);+#2041=EDGE_LOOP('',(#2042,#2043,#2044,#2051,#2056,#2063,#2068,#2073,#2078,#2084,#2089,#2094));+#2042=ORIENTED_EDGE('',*,*,#585,.F.);+#2043=ORIENTED_EDGE('',*,*,#596,.T.);+#2044=ORIENTED_EDGE('',*,*,#2045,.T.);+#2045=EDGE_CURVE('',#597,#2046,#2048,.T.);+#2046=VERTEX_POINT('',#2047);+#2047=CARTESIAN_POINT('',(-4.098480775301,-2.11,1.292364817767));+#2048=CIRCLE('',#2049,1.E-01);+#2049=AXIS2_PLACEMENT_3D('',#2050,#1616,#1617);+#2050=CARTESIAN_POINT('',(-4.,-2.11,1.275));+#2051=ORIENTED_EDGE('',*,*,#2052,.T.);+#2052=EDGE_CURVE('',#2046,#2053,#2055,.T.);+#2053=VERTEX_POINT('',#2054);+#2054=CARTESIAN_POINT('',(-4.276476480287,-2.11,0.2479055467));+#2055=LINE('',#2047,#1623);+#2056=ORIENTED_EDGE('',*,*,#2057,.T.);+#2057=EDGE_CURVE('',#2053,#2058,#2060,.T.);+#2058=VERTEX_POINT('',#2059);+#2059=CARTESIAN_POINT('',(-4.571918806191,-2.11,-2.22044604925E-16));+#2060=CIRCLE('',#2061,0.3);+#2061=AXIS2_PLACEMENT_3D('',#2062,#493,#1632);+#2062=CARTESIAN_POINT('',(-4.571918806191,-2.11,0.3));+#2063=ORIENTED_EDGE('',*,*,#2064,.T.);+#2064=EDGE_CURVE('',#2058,#2065,#2067,.T.);+#2065=VERTEX_POINT('',#2066);+#2066=CARTESIAN_POINT('',(-5.15,-2.11,-2.22044604925E-16));+#2067=LINE('',#2059,#480);+#2068=ORIENTED_EDGE('',*,*,#2069,.T.);+#2069=EDGE_CURVE('',#2065,#2070,#2072,.T.);+#2070=VERTEX_POINT('',#2071);+#2071=CARTESIAN_POINT('',(-5.15,-2.11,0.2));+#2072=LINE('',#2066,#466);+#2073=ORIENTED_EDGE('',*,*,#2074,.T.);+#2074=EDGE_CURVE('',#2070,#2075,#2077,.T.);+#2075=VERTEX_POINT('',#2076);+#2076=CARTESIAN_POINT('',(-4.571918806191,-2.11,0.2));+#2077=LINE('',#2071,#430);+#2078=ORIENTED_EDGE('',*,*,#2079,.T.);+#2079=EDGE_CURVE('',#2075,#2080,#2082,.T.);+#2080=VERTEX_POINT('',#2081);+#2081=CARTESIAN_POINT('',(-4.47343803089,-2.11,0.282635182233));+#2082=CIRCLE('',#2083,1.E-01);+#2083=AXIS2_PLACEMENT_3D('',#2062,#1654,#1655);+#2084=ORIENTED_EDGE('',*,*,#2085,.T.);+#2085=EDGE_CURVE('',#2080,#2086,#2088,.T.);+#2086=VERTEX_POINT('',#2087);+#2087=CARTESIAN_POINT('',(-4.295442325904,-2.11,1.3270944533));+#2088=LINE('',#2081,#1661);+#2089=ORIENTED_EDGE('',*,*,#2090,.T.);+#2090=EDGE_CURVE('',#2086,#2091,#2092,.T.);+#2091=VERTEX_POINT('',#2035);+#2092=CIRCLE('',#2093,0.3);+#2093=AXIS2_PLACEMENT_3D('',#2050,#1668,#1669);+#2094=ORIENTED_EDGE('',*,*,#2095,.T.);+#2095=EDGE_CURVE('',#2091,#586,#2034,.T.);+#2096=PLANE('',#2097);+#2097=AXIS2_PLACEMENT_3D('',#2098,#493,#13);+#2098=CARTESIAN_POINT('',(-4.341787690374,-2.11,0.743634917138));+#2099=ADVANCED_FACE('',(#2100),#2114,.F.);+#2100=FACE_BOUND('',#2101,.F.);+#2101=EDGE_LOOP('',(#2102,#2103,#2110,#2113));+#2102=ORIENTED_EDGE('',*,*,#609,.T.);+#2103=ORIENTED_EDGE('',*,*,#2104,.T.);+#2104=EDGE_CURVE('',#604,#2105,#2107,.T.);+#2105=VERTEX_POINT('',#2106);+#2106=CARTESIAN_POINT('',(-4.098480775301,-1.7,1.292364817767));+#2107=CIRCLE('',#2108,1.E-01);+#2108=AXIS2_PLACEMENT_3D('',#2109,#1616,#1617);+#2109=CARTESIAN_POINT('',(-4.,-1.7,1.275));+#2110=ORIENTED_EDGE('',*,*,#2111,.F.);+#2111=EDGE_CURVE('',#2046,#2105,#2112,.T.);+#2112=LINE('',#2047,#492);+#2113=ORIENTED_EDGE('',*,*,#2045,.F.);+#2114=CYLINDRICAL_SURFACE('',#2115,1.E-01);+#2115=AXIS2_PLACEMENT_3D('',#2050,#1692,#1617);+#2116=ADVANCED_FACE('',(#2117),#2166,.T.);+#2117=FACE_BOUND('',#2118,.T.);+#2118=EDGE_LOOP('',(#616,#602,#2103,#2119,#2124,#2131,#2136,#2141,#2146,#2152,#2157,#2163));+#2119=ORIENTED_EDGE('',*,*,#2120,.T.);+#2120=EDGE_CURVE('',#2105,#2121,#2123,.T.);+#2121=VERTEX_POINT('',#2122);+#2122=CARTESIAN_POINT('',(-4.276476480287,-1.7,0.2479055467));+#2123=LINE('',#2106,#1623);+#2124=ORIENTED_EDGE('',*,*,#2125,.T.);+#2125=EDGE_CURVE('',#2121,#2126,#2128,.T.);+#2126=VERTEX_POINT('',#2127);+#2127=CARTESIAN_POINT('',(-4.571918806191,-1.7,-2.22044604925E-16));+#2128=CIRCLE('',#2129,0.3);+#2129=AXIS2_PLACEMENT_3D('',#2130,#493,#1632);+#2130=CARTESIAN_POINT('',(-4.571918806191,-1.7,0.3));+#2131=ORIENTED_EDGE('',*,*,#2132,.T.);+#2132=EDGE_CURVE('',#2126,#2133,#2135,.T.);+#2133=VERTEX_POINT('',#2134);+#2134=CARTESIAN_POINT('',(-5.15,-1.7,-2.22044604925E-16));+#2135=LINE('',#2127,#480);+#2136=ORIENTED_EDGE('',*,*,#2137,.T.);+#2137=EDGE_CURVE('',#2133,#2138,#2140,.T.);+#2138=VERTEX_POINT('',#2139);+#2139=CARTESIAN_POINT('',(-5.15,-1.7,0.2));+#2140=LINE('',#2134,#466);+#2141=ORIENTED_EDGE('',*,*,#2142,.T.);+#2142=EDGE_CURVE('',#2138,#2143,#2145,.T.);+#2143=VERTEX_POINT('',#2144);+#2144=CARTESIAN_POINT('',(-4.571918806191,-1.7,0.2));+#2145=LINE('',#2139,#430);+#2146=ORIENTED_EDGE('',*,*,#2147,.T.);+#2147=EDGE_CURVE('',#2143,#2148,#2150,.T.);+#2148=VERTEX_POINT('',#2149);+#2149=CARTESIAN_POINT('',(-4.47343803089,-1.7,0.282635182233));+#2150=CIRCLE('',#2151,1.E-01);+#2151=AXIS2_PLACEMENT_3D('',#2130,#1654,#1655);+#2152=ORIENTED_EDGE('',*,*,#2153,.T.);+#2153=EDGE_CURVE('',#2148,#2154,#2156,.T.);+#2154=VERTEX_POINT('',#2155);+#2155=CARTESIAN_POINT('',(-4.295442325904,-1.7,1.3270944533));+#2156=LINE('',#2149,#1661);+#2157=ORIENTED_EDGE('',*,*,#2158,.T.);+#2158=EDGE_CURVE('',#2154,#2159,#2161,.T.);+#2159=VERTEX_POINT('',#2160);+#2160=CARTESIAN_POINT('',(-4.,-1.7,1.575));+#2161=CIRCLE('',#2162,0.3);+#2162=AXIS2_PLACEMENT_3D('',#2109,#1668,#1669);+#2163=ORIENTED_EDGE('',*,*,#2164,.T.);+#2164=EDGE_CURVE('',#2159,#618,#2165,.T.);+#2165=LINE('',#2160,#430);+#2166=PLANE('',#2167);+#2167=AXIS2_PLACEMENT_3D('',#2168,#493,#13);+#2168=CARTESIAN_POINT('',(-4.341787690374,-1.7,0.743634917138));+#2169=ADVANCED_FACE('',(#2170),#436,.F.);+#2170=FACE_BOUND('',#2171,.F.);+#2171=EDGE_LOOP('',(#2172,#2173,#2177,#2178));+#2172=ORIENTED_EDGE('',*,*,#630,.T.);+#2173=ORIENTED_EDGE('',*,*,#2174,.T.);+#2174=EDGE_CURVE('',#625,#1361,#2175,.T.);+#2175=LINE('',#2176,#430);+#2176=CARTESIAN_POINT('',(-4.,-0.84,1.575));+#2177=ORIENTED_EDGE('',*,*,#1360,.F.);+#2178=ORIENTED_EDGE('',*,*,#2179,.F.);+#2179=EDGE_CURVE('',#618,#1357,#2165,.T.);+#2180=ADVANCED_FACE('',(#2181),#2237,.F.);+#2181=FACE_BOUND('',#2182,.F.);+#2182=EDGE_LOOP('',(#2183,#2184,#2185,#2192,#2197,#2204,#2209,#2214,#2219,#2225,#2230,#2235));+#2183=ORIENTED_EDGE('',*,*,#624,.F.);+#2184=ORIENTED_EDGE('',*,*,#635,.T.);+#2185=ORIENTED_EDGE('',*,*,#2186,.T.);+#2186=EDGE_CURVE('',#636,#2187,#2189,.T.);+#2187=VERTEX_POINT('',#2188);+#2188=CARTESIAN_POINT('',(-4.098480775301,-0.84,1.292364817767));+#2189=CIRCLE('',#2190,1.E-01);+#2190=AXIS2_PLACEMENT_3D('',#2191,#1616,#1617);+#2191=CARTESIAN_POINT('',(-4.,-0.84,1.275));+#2192=ORIENTED_EDGE('',*,*,#2193,.T.);+#2193=EDGE_CURVE('',#2187,#2194,#2196,.T.);+#2194=VERTEX_POINT('',#2195);+#2195=CARTESIAN_POINT('',(-4.276476480287,-0.84,0.2479055467));+#2196=LINE('',#2188,#1623);+#2197=ORIENTED_EDGE('',*,*,#2198,.T.);+#2198=EDGE_CURVE('',#2194,#2199,#2201,.T.);+#2199=VERTEX_POINT('',#2200);+#2200=CARTESIAN_POINT('',(-4.571918806191,-0.84,-2.22044604925E-16));+#2201=CIRCLE('',#2202,0.3);+#2202=AXIS2_PLACEMENT_3D('',#2203,#493,#1632);+#2203=CARTESIAN_POINT('',(-4.571918806191,-0.84,0.3));+#2204=ORIENTED_EDGE('',*,*,#2205,.T.);+#2205=EDGE_CURVE('',#2199,#2206,#2208,.T.);+#2206=VERTEX_POINT('',#2207);+#2207=CARTESIAN_POINT('',(-5.15,-0.84,-2.22044604925E-16));+#2208=LINE('',#2200,#480);+#2209=ORIENTED_EDGE('',*,*,#2210,.T.);+#2210=EDGE_CURVE('',#2206,#2211,#2213,.T.);+#2211=VERTEX_POINT('',#2212);+#2212=CARTESIAN_POINT('',(-5.15,-0.84,0.2));+#2213=LINE('',#2207,#466);+#2214=ORIENTED_EDGE('',*,*,#2215,.T.);+#2215=EDGE_CURVE('',#2211,#2216,#2218,.T.);+#2216=VERTEX_POINT('',#2217);+#2217=CARTESIAN_POINT('',(-4.571918806191,-0.84,0.2));+#2218=LINE('',#2212,#430);+#2219=ORIENTED_EDGE('',*,*,#2220,.T.);+#2220=EDGE_CURVE('',#2216,#2221,#2223,.T.);+#2221=VERTEX_POINT('',#2222);+#2222=CARTESIAN_POINT('',(-4.47343803089,-0.84,0.282635182233));+#2223=CIRCLE('',#2224,1.E-01);+#2224=AXIS2_PLACEMENT_3D('',#2203,#1654,#1655);+#2225=ORIENTED_EDGE('',*,*,#2226,.T.);+#2226=EDGE_CURVE('',#2221,#2227,#2229,.T.);+#2227=VERTEX_POINT('',#2228);+#2228=CARTESIAN_POINT('',(-4.295442325904,-0.84,1.3270944533));+#2229=LINE('',#2222,#1661);+#2230=ORIENTED_EDGE('',*,*,#2231,.T.);+#2231=EDGE_CURVE('',#2227,#2232,#2233,.T.);+#2232=VERTEX_POINT('',#2176);+#2233=CIRCLE('',#2234,0.3);+#2234=AXIS2_PLACEMENT_3D('',#2191,#1668,#1669);+#2235=ORIENTED_EDGE('',*,*,#2236,.T.);+#2236=EDGE_CURVE('',#2232,#625,#2175,.T.);+#2237=PLANE('',#2238);+#2238=AXIS2_PLACEMENT_3D('',#2239,#493,#13);+#2239=CARTESIAN_POINT('',(-4.341787690374,-0.84,0.743634917138));+#2240=ADVANCED_FACE('',(#2241),#2255,.F.);+#2241=FACE_BOUND('',#2242,.F.);+#2242=EDGE_LOOP('',(#2243,#2244,#2251,#2254));+#2243=ORIENTED_EDGE('',*,*,#648,.T.);+#2244=ORIENTED_EDGE('',*,*,#2245,.T.);+#2245=EDGE_CURVE('',#643,#2246,#2248,.T.);+#2246=VERTEX_POINT('',#2247);+#2247=CARTESIAN_POINT('',(-4.098480775301,-0.43,1.292364817767));+#2248=CIRCLE('',#2249,1.E-01);+#2249=AXIS2_PLACEMENT_3D('',#2250,#1616,#1617);+#2250=CARTESIAN_POINT('',(-4.,-0.43,1.275));+#2251=ORIENTED_EDGE('',*,*,#2252,.F.);+#2252=EDGE_CURVE('',#2187,#2246,#2253,.T.);+#2253=LINE('',#2188,#492);+#2254=ORIENTED_EDGE('',*,*,#2186,.F.);+#2255=CYLINDRICAL_SURFACE('',#2256,1.E-01);+#2256=AXIS2_PLACEMENT_3D('',#2191,#1692,#1617);+#2257=ADVANCED_FACE('',(#2258),#2307,.T.);+#2258=FACE_BOUND('',#2259,.T.);+#2259=EDGE_LOOP('',(#655,#641,#2244,#2260,#2265,#2272,#2277,#2282,#2287,#2293,#2298,#2304));+#2260=ORIENTED_EDGE('',*,*,#2261,.T.);+#2261=EDGE_CURVE('',#2246,#2262,#2264,.T.);+#2262=VERTEX_POINT('',#2263);+#2263=CARTESIAN_POINT('',(-4.276476480287,-0.43,0.2479055467));+#2264=LINE('',#2247,#1623);+#2265=ORIENTED_EDGE('',*,*,#2266,.T.);+#2266=EDGE_CURVE('',#2262,#2267,#2269,.T.);+#2267=VERTEX_POINT('',#2268);+#2268=CARTESIAN_POINT('',(-4.571918806191,-0.43,-2.22044604925E-16));+#2269=CIRCLE('',#2270,0.3);+#2270=AXIS2_PLACEMENT_3D('',#2271,#493,#1632);+#2271=CARTESIAN_POINT('',(-4.571918806191,-0.43,0.3));+#2272=ORIENTED_EDGE('',*,*,#2273,.T.);+#2273=EDGE_CURVE('',#2267,#2274,#2276,.T.);+#2274=VERTEX_POINT('',#2275);+#2275=CARTESIAN_POINT('',(-5.15,-0.43,-2.22044604925E-16));+#2276=LINE('',#2268,#480);+#2277=ORIENTED_EDGE('',*,*,#2278,.T.);+#2278=EDGE_CURVE('',#2274,#2279,#2281,.T.);+#2279=VERTEX_POINT('',#2280);+#2280=CARTESIAN_POINT('',(-5.15,-0.43,0.2));+#2281=LINE('',#2275,#466);+#2282=ORIENTED_EDGE('',*,*,#2283,.T.);+#2283=EDGE_CURVE('',#2279,#2284,#2286,.T.);+#2284=VERTEX_POINT('',#2285);+#2285=CARTESIAN_POINT('',(-4.571918806191,-0.43,0.2));+#2286=LINE('',#2280,#430);+#2287=ORIENTED_EDGE('',*,*,#2288,.T.);+#2288=EDGE_CURVE('',#2284,#2289,#2291,.T.);+#2289=VERTEX_POINT('',#2290);+#2290=CARTESIAN_POINT('',(-4.47343803089,-0.43,0.282635182233));+#2291=CIRCLE('',#2292,1.E-01);+#2292=AXIS2_PLACEMENT_3D('',#2271,#1654,#1655);+#2293=ORIENTED_EDGE('',*,*,#2294,.T.);+#2294=EDGE_CURVE('',#2289,#2295,#2297,.T.);+#2295=VERTEX_POINT('',#2296);+#2296=CARTESIAN_POINT('',(-4.295442325904,-0.43,1.3270944533));+#2297=LINE('',#2290,#1661);+#2298=ORIENTED_EDGE('',*,*,#2299,.T.);+#2299=EDGE_CURVE('',#2295,#2300,#2302,.T.);+#2300=VERTEX_POINT('',#2301);+#2301=CARTESIAN_POINT('',(-4.,-0.43,1.575));+#2302=CIRCLE('',#2303,0.3);+#2303=AXIS2_PLACEMENT_3D('',#2250,#1668,#1669);+#2304=ORIENTED_EDGE('',*,*,#2305,.T.);+#2305=EDGE_CURVE('',#2300,#657,#2306,.T.);+#2306=LINE('',#2301,#430);+#2307=PLANE('',#2308);+#2308=AXIS2_PLACEMENT_3D('',#2309,#493,#13);+#2309=CARTESIAN_POINT('',(-4.341787690374,-0.43,0.743634917138));+#2310=ADVANCED_FACE('',(#2311),#436,.F.);+#2311=FACE_BOUND('',#2312,.F.);+#2312=EDGE_LOOP('',(#2313,#2314,#2318,#2319));+#2313=ORIENTED_EDGE('',*,*,#669,.T.);+#2314=ORIENTED_EDGE('',*,*,#2315,.T.);+#2315=EDGE_CURVE('',#664,#1369,#2316,.T.);+#2316=LINE('',#2317,#430);+#2317=CARTESIAN_POINT('',(-4.,0.43,1.575));+#2318=ORIENTED_EDGE('',*,*,#1368,.F.);+#2319=ORIENTED_EDGE('',*,*,#2320,.F.);+#2320=EDGE_CURVE('',#657,#1365,#2306,.T.);+#2321=ADVANCED_FACE('',(#2322),#2378,.F.);+#2322=FACE_BOUND('',#2323,.F.);+#2323=EDGE_LOOP('',(#2324,#2325,#2326,#2333,#2338,#2345,#2350,#2355,#2360,#2366,#2371,#2376));+#2324=ORIENTED_EDGE('',*,*,#663,.F.);+#2325=ORIENTED_EDGE('',*,*,#674,.T.);+#2326=ORIENTED_EDGE('',*,*,#2327,.T.);+#2327=EDGE_CURVE('',#675,#2328,#2330,.T.);+#2328=VERTEX_POINT('',#2329);+#2329=CARTESIAN_POINT('',(-4.098480775301,0.43,1.292364817767));+#2330=CIRCLE('',#2331,1.E-01);+#2331=AXIS2_PLACEMENT_3D('',#2332,#1616,#1617);+#2332=CARTESIAN_POINT('',(-4.,0.43,1.275));+#2333=ORIENTED_EDGE('',*,*,#2334,.T.);+#2334=EDGE_CURVE('',#2328,#2335,#2337,.T.);+#2335=VERTEX_POINT('',#2336);+#2336=CARTESIAN_POINT('',(-4.276476480287,0.43,0.2479055467));+#2337=LINE('',#2329,#1623);+#2338=ORIENTED_EDGE('',*,*,#2339,.T.);+#2339=EDGE_CURVE('',#2335,#2340,#2342,.T.);+#2340=VERTEX_POINT('',#2341);+#2341=CARTESIAN_POINT('',(-4.571918806191,0.43,-2.22044604925E-16));+#2342=CIRCLE('',#2343,0.3);+#2343=AXIS2_PLACEMENT_3D('',#2344,#493,#1632);+#2344=CARTESIAN_POINT('',(-4.571918806191,0.43,0.3));+#2345=ORIENTED_EDGE('',*,*,#2346,.T.);+#2346=EDGE_CURVE('',#2340,#2347,#2349,.T.);+#2347=VERTEX_POINT('',#2348);+#2348=CARTESIAN_POINT('',(-5.15,0.43,-2.22044604925E-16));+#2349=LINE('',#2341,#480);+#2350=ORIENTED_EDGE('',*,*,#2351,.T.);+#2351=EDGE_CURVE('',#2347,#2352,#2354,.T.);+#2352=VERTEX_POINT('',#2353);+#2353=CARTESIAN_POINT('',(-5.15,0.43,0.2));+#2354=LINE('',#2348,#466);+#2355=ORIENTED_EDGE('',*,*,#2356,.T.);+#2356=EDGE_CURVE('',#2352,#2357,#2359,.T.);+#2357=VERTEX_POINT('',#2358);+#2358=CARTESIAN_POINT('',(-4.571918806191,0.43,0.2));+#2359=LINE('',#2353,#430);+#2360=ORIENTED_EDGE('',*,*,#2361,.T.);+#2361=EDGE_CURVE('',#2357,#2362,#2364,.T.);+#2362=VERTEX_POINT('',#2363);+#2363=CARTESIAN_POINT('',(-4.47343803089,0.43,0.282635182233));+#2364=CIRCLE('',#2365,1.E-01);+#2365=AXIS2_PLACEMENT_3D('',#2344,#1654,#1655);+#2366=ORIENTED_EDGE('',*,*,#2367,.T.);+#2367=EDGE_CURVE('',#2362,#2368,#2370,.T.);+#2368=VERTEX_POINT('',#2369);+#2369=CARTESIAN_POINT('',(-4.295442325904,0.43,1.3270944533));+#2370=LINE('',#2363,#1661);+#2371=ORIENTED_EDGE('',*,*,#2372,.T.);+#2372=EDGE_CURVE('',#2368,#2373,#2374,.T.);+#2373=VERTEX_POINT('',#2317);+#2374=CIRCLE('',#2375,0.3);+#2375=AXIS2_PLACEMENT_3D('',#2332,#1668,#1669);+#2376=ORIENTED_EDGE('',*,*,#2377,.T.);+#2377=EDGE_CURVE('',#2373,#664,#2316,.T.);+#2378=PLANE('',#2379);+#2379=AXIS2_PLACEMENT_3D('',#2380,#493,#13);+#2380=CARTESIAN_POINT('',(-4.341787690374,0.43,0.743634917138));+#2381=ADVANCED_FACE('',(#2382),#2396,.F.);+#2382=FACE_BOUND('',#2383,.F.);+#2383=EDGE_LOOP('',(#2384,#2385,#2392,#2395));+#2384=ORIENTED_EDGE('',*,*,#687,.T.);+#2385=ORIENTED_EDGE('',*,*,#2386,.T.);+#2386=EDGE_CURVE('',#682,#2387,#2389,.T.);+#2387=VERTEX_POINT('',#2388);+#2388=CARTESIAN_POINT('',(-4.098480775301,0.84,1.292364817767));+#2389=CIRCLE('',#2390,1.E-01);+#2390=AXIS2_PLACEMENT_3D('',#2391,#1616,#1617);+#2391=CARTESIAN_POINT('',(-4.,0.84,1.275));+#2392=ORIENTED_EDGE('',*,*,#2393,.F.);+#2393=EDGE_CURVE('',#2328,#2387,#2394,.T.);+#2394=LINE('',#2329,#492);+#2395=ORIENTED_EDGE('',*,*,#2327,.F.);+#2396=CYLINDRICAL_SURFACE('',#2397,1.E-01);+#2397=AXIS2_PLACEMENT_3D('',#2332,#1692,#1617);+#2398=ADVANCED_FACE('',(#2399),#2448,.T.);+#2399=FACE_BOUND('',#2400,.T.);+#2400=EDGE_LOOP('',(#694,#680,#2385,#2401,#2406,#2413,#2418,#2423,#2428,#2434,#2439,#2445));+#2401=ORIENTED_EDGE('',*,*,#2402,.T.);+#2402=EDGE_CURVE('',#2387,#2403,#2405,.T.);+#2403=VERTEX_POINT('',#2404);+#2404=CARTESIAN_POINT('',(-4.276476480287,0.84,0.2479055467));+#2405=LINE('',#2388,#1623);+#2406=ORIENTED_EDGE('',*,*,#2407,.T.);+#2407=EDGE_CURVE('',#2403,#2408,#2410,.T.);+#2408=VERTEX_POINT('',#2409);+#2409=CARTESIAN_POINT('',(-4.571918806191,0.84,-2.22044604925E-16));+#2410=CIRCLE('',#2411,0.3);+#2411=AXIS2_PLACEMENT_3D('',#2412,#493,#1632);+#2412=CARTESIAN_POINT('',(-4.571918806191,0.84,0.3));+#2413=ORIENTED_EDGE('',*,*,#2414,.T.);+#2414=EDGE_CURVE('',#2408,#2415,#2417,.T.);+#2415=VERTEX_POINT('',#2416);+#2416=CARTESIAN_POINT('',(-5.15,0.84,-2.22044604925E-16));+#2417=LINE('',#2409,#480);+#2418=ORIENTED_EDGE('',*,*,#2419,.T.);+#2419=EDGE_CURVE('',#2415,#2420,#2422,.T.);+#2420=VERTEX_POINT('',#2421);+#2421=CARTESIAN_POINT('',(-5.15,0.84,0.2));+#2422=LINE('',#2416,#466);+#2423=ORIENTED_EDGE('',*,*,#2424,.T.);+#2424=EDGE_CURVE('',#2420,#2425,#2427,.T.);+#2425=VERTEX_POINT('',#2426);+#2426=CARTESIAN_POINT('',(-4.571918806191,0.84,0.2));+#2427=LINE('',#2421,#430);+#2428=ORIENTED_EDGE('',*,*,#2429,.T.);+#2429=EDGE_CURVE('',#2425,#2430,#2432,.T.);+#2430=VERTEX_POINT('',#2431);+#2431=CARTESIAN_POINT('',(-4.47343803089,0.84,0.282635182233));+#2432=CIRCLE('',#2433,1.E-01);+#2433=AXIS2_PLACEMENT_3D('',#2412,#1654,#1655);+#2434=ORIENTED_EDGE('',*,*,#2435,.T.);+#2435=EDGE_CURVE('',#2430,#2436,#2438,.T.);+#2436=VERTEX_POINT('',#2437);+#2437=CARTESIAN_POINT('',(-4.295442325904,0.84,1.3270944533));+#2438=LINE('',#2431,#1661);+#2439=ORIENTED_EDGE('',*,*,#2440,.T.);+#2440=EDGE_CURVE('',#2436,#2441,#2443,.T.);+#2441=VERTEX_POINT('',#2442);+#2442=CARTESIAN_POINT('',(-4.,0.84,1.575));+#2443=CIRCLE('',#2444,0.3);+#2444=AXIS2_PLACEMENT_3D('',#2391,#1668,#1669);+#2445=ORIENTED_EDGE('',*,*,#2446,.T.);+#2446=EDGE_CURVE('',#2441,#696,#2447,.T.);+#2447=LINE('',#2442,#430);+#2448=PLANE('',#2449);+#2449=AXIS2_PLACEMENT_3D('',#2450,#493,#13);+#2450=CARTESIAN_POINT('',(-4.341787690374,0.84,0.743634917138));+#2451=ADVANCED_FACE('',(#2452),#436,.F.);+#2452=FACE_BOUND('',#2453,.F.);+#2453=EDGE_LOOP('',(#2454,#2455,#2459,#2460));+#2454=ORIENTED_EDGE('',*,*,#708,.T.);+#2455=ORIENTED_EDGE('',*,*,#2456,.T.);+#2456=EDGE_CURVE('',#703,#1377,#2457,.T.);+#2457=LINE('',#2458,#430);+#2458=CARTESIAN_POINT('',(-4.,1.7,1.575));+#2459=ORIENTED_EDGE('',*,*,#1376,.F.);+#2460=ORIENTED_EDGE('',*,*,#2461,.F.);+#2461=EDGE_CURVE('',#696,#1373,#2447,.T.);+#2462=ADVANCED_FACE('',(#2463),#2519,.F.);+#2463=FACE_BOUND('',#2464,.F.);+#2464=EDGE_LOOP('',(#2465,#2466,#2467,#2474,#2479,#2486,#2491,#2496,#2501,#2507,#2512,#2517));+#2465=ORIENTED_EDGE('',*,*,#702,.F.);+#2466=ORIENTED_EDGE('',*,*,#713,.T.);+#2467=ORIENTED_EDGE('',*,*,#2468,.T.);+#2468=EDGE_CURVE('',#714,#2469,#2471,.T.);+#2469=VERTEX_POINT('',#2470);+#2470=CARTESIAN_POINT('',(-4.098480775301,1.7,1.292364817767));+#2471=CIRCLE('',#2472,1.E-01);+#2472=AXIS2_PLACEMENT_3D('',#2473,#1616,#1617);+#2473=CARTESIAN_POINT('',(-4.,1.7,1.275));+#2474=ORIENTED_EDGE('',*,*,#2475,.T.);+#2475=EDGE_CURVE('',#2469,#2476,#2478,.T.);+#2476=VERTEX_POINT('',#2477);+#2477=CARTESIAN_POINT('',(-4.276476480287,1.7,0.2479055467));+#2478=LINE('',#2470,#1623);+#2479=ORIENTED_EDGE('',*,*,#2480,.T.);+#2480=EDGE_CURVE('',#2476,#2481,#2483,.T.);+#2481=VERTEX_POINT('',#2482);+#2482=CARTESIAN_POINT('',(-4.571918806191,1.7,-2.22044604925E-16));+#2483=CIRCLE('',#2484,0.3);+#2484=AXIS2_PLACEMENT_3D('',#2485,#493,#1632);+#2485=CARTESIAN_POINT('',(-4.571918806191,1.7,0.3));+#2486=ORIENTED_EDGE('',*,*,#2487,.T.);+#2487=EDGE_CURVE('',#2481,#2488,#2490,.T.);+#2488=VERTEX_POINT('',#2489);+#2489=CARTESIAN_POINT('',(-5.15,1.7,-2.22044604925E-16));+#2490=LINE('',#2482,#480);+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2488,#2493,#2495,.T.);+#2493=VERTEX_POINT('',#2494);+#2494=CARTESIAN_POINT('',(-5.15,1.7,0.2));+#2495=LINE('',#2489,#466);+#2496=ORIENTED_EDGE('',*,*,#2497,.T.);+#2497=EDGE_CURVE('',#2493,#2498,#2500,.T.);+#2498=VERTEX_POINT('',#2499);+#2499=CARTESIAN_POINT('',(-4.571918806191,1.7,0.2));+#2500=LINE('',#2494,#430);+#2501=ORIENTED_EDGE('',*,*,#2502,.T.);+#2502=EDGE_CURVE('',#2498,#2503,#2505,.T.);+#2503=VERTEX_POINT('',#2504);+#2504=CARTESIAN_POINT('',(-4.47343803089,1.7,0.282635182233));+#2505=CIRCLE('',#2506,1.E-01);+#2506=AXIS2_PLACEMENT_3D('',#2485,#1654,#1655);+#2507=ORIENTED_EDGE('',*,*,#2508,.T.);+#2508=EDGE_CURVE('',#2503,#2509,#2511,.T.);+#2509=VERTEX_POINT('',#2510);+#2510=CARTESIAN_POINT('',(-4.295442325904,1.7,1.3270944533));+#2511=LINE('',#2504,#1661);+#2512=ORIENTED_EDGE('',*,*,#2513,.T.);+#2513=EDGE_CURVE('',#2509,#2514,#2515,.T.);+#2514=VERTEX_POINT('',#2458);+#2515=CIRCLE('',#2516,0.3);+#2516=AXIS2_PLACEMENT_3D('',#2473,#1668,#1669);+#2517=ORIENTED_EDGE('',*,*,#2518,.T.);+#2518=EDGE_CURVE('',#2514,#703,#2457,.T.);+#2519=PLANE('',#2520);+#2520=AXIS2_PLACEMENT_3D('',#2521,#493,#13);+#2521=CARTESIAN_POINT('',(-4.341787690374,1.7,0.743634917138));+#2522=ADVANCED_FACE('',(#2523),#2537,.F.);+#2523=FACE_BOUND('',#2524,.F.);+#2524=EDGE_LOOP('',(#2525,#2526,#2533,#2536));+#2525=ORIENTED_EDGE('',*,*,#726,.T.);+#2526=ORIENTED_EDGE('',*,*,#2527,.T.);+#2527=EDGE_CURVE('',#721,#2528,#2530,.T.);+#2528=VERTEX_POINT('',#2529);+#2529=CARTESIAN_POINT('',(-4.098480775301,2.11,1.292364817767));+#2530=CIRCLE('',#2531,1.E-01);+#2531=AXIS2_PLACEMENT_3D('',#2532,#1616,#1617);+#2532=CARTESIAN_POINT('',(-4.,2.11,1.275));+#2533=ORIENTED_EDGE('',*,*,#2534,.F.);+#2534=EDGE_CURVE('',#2469,#2528,#2535,.T.);+#2535=LINE('',#2470,#492);+#2536=ORIENTED_EDGE('',*,*,#2468,.F.);+#2537=CYLINDRICAL_SURFACE('',#2538,1.E-01);+#2538=AXIS2_PLACEMENT_3D('',#2473,#1692,#1617);+#2539=ADVANCED_FACE('',(#2540),#2589,.T.);+#2540=FACE_BOUND('',#2541,.T.);+#2541=EDGE_LOOP('',(#733,#719,#2526,#2542,#2547,#2554,#2559,#2564,#2569,#2575,#2580,#2586));+#2542=ORIENTED_EDGE('',*,*,#2543,.T.);+#2543=EDGE_CURVE('',#2528,#2544,#2546,.T.);+#2544=VERTEX_POINT('',#2545);+#2545=CARTESIAN_POINT('',(-4.276476480287,2.11,0.2479055467));+#2546=LINE('',#2529,#1623);+#2547=ORIENTED_EDGE('',*,*,#2548,.T.);+#2548=EDGE_CURVE('',#2544,#2549,#2551,.T.);+#2549=VERTEX_POINT('',#2550);+#2550=CARTESIAN_POINT('',(-4.571918806191,2.11,-2.22044604925E-16));+#2551=CIRCLE('',#2552,0.3);+#2552=AXIS2_PLACEMENT_3D('',#2553,#493,#1632);+#2553=CARTESIAN_POINT('',(-4.571918806191,2.11,0.3));+#2554=ORIENTED_EDGE('',*,*,#2555,.T.);+#2555=EDGE_CURVE('',#2549,#2556,#2558,.T.);+#2556=VERTEX_POINT('',#2557);+#2557=CARTESIAN_POINT('',(-5.15,2.11,-2.22044604925E-16));+#2558=LINE('',#2550,#480);+#2559=ORIENTED_EDGE('',*,*,#2560,.T.);+#2560=EDGE_CURVE('',#2556,#2561,#2563,.T.);+#2561=VERTEX_POINT('',#2562);+#2562=CARTESIAN_POINT('',(-5.15,2.11,0.2));+#2563=LINE('',#2557,#466);+#2564=ORIENTED_EDGE('',*,*,#2565,.T.);+#2565=EDGE_CURVE('',#2561,#2566,#2568,.T.);+#2566=VERTEX_POINT('',#2567);+#2567=CARTESIAN_POINT('',(-4.571918806191,2.11,0.2));+#2568=LINE('',#2562,#430);+#2569=ORIENTED_EDGE('',*,*,#2570,.T.);+#2570=EDGE_CURVE('',#2566,#2571,#2573,.T.);+#2571=VERTEX_POINT('',#2572);+#2572=CARTESIAN_POINT('',(-4.47343803089,2.11,0.282635182233));+#2573=CIRCLE('',#2574,1.E-01);+#2574=AXIS2_PLACEMENT_3D('',#2553,#1654,#1655);+#2575=ORIENTED_EDGE('',*,*,#2576,.T.);+#2576=EDGE_CURVE('',#2571,#2577,#2579,.T.);+#2577=VERTEX_POINT('',#2578);+#2578=CARTESIAN_POINT('',(-4.295442325904,2.11,1.3270944533));+#2579=LINE('',#2572,#1661);+#2580=ORIENTED_EDGE('',*,*,#2581,.T.);+#2581=EDGE_CURVE('',#2577,#2582,#2584,.T.);+#2582=VERTEX_POINT('',#2583);+#2583=CARTESIAN_POINT('',(-4.,2.11,1.575));+#2584=CIRCLE('',#2585,0.3);+#2585=AXIS2_PLACEMENT_3D('',#2532,#1668,#1669);+#2586=ORIENTED_EDGE('',*,*,#2587,.T.);+#2587=EDGE_CURVE('',#2582,#735,#2588,.T.);+#2588=LINE('',#2583,#430);+#2589=PLANE('',#2590);+#2590=AXIS2_PLACEMENT_3D('',#2591,#493,#13);+#2591=CARTESIAN_POINT('',(-4.341787690374,2.11,0.743634917138));+#2592=ADVANCED_FACE('',(#2593),#436,.F.);+#2593=FACE_BOUND('',#2594,.F.);+#2594=EDGE_LOOP('',(#2595,#2596,#2600,#2601));+#2595=ORIENTED_EDGE('',*,*,#747,.T.);+#2596=ORIENTED_EDGE('',*,*,#2597,.T.);+#2597=EDGE_CURVE('',#742,#1385,#2598,.T.);+#2598=LINE('',#2599,#430);+#2599=CARTESIAN_POINT('',(-4.,2.97,1.575));+#2600=ORIENTED_EDGE('',*,*,#1384,.F.);+#2601=ORIENTED_EDGE('',*,*,#2602,.F.);+#2602=EDGE_CURVE('',#735,#1381,#2588,.T.);+#2603=ADVANCED_FACE('',(#2604),#2660,.F.);+#2604=FACE_BOUND('',#2605,.F.);+#2605=EDGE_LOOP('',(#2606,#2607,#2608,#2615,#2620,#2627,#2632,#2637,#2642,#2648,#2653,#2658));+#2606=ORIENTED_EDGE('',*,*,#741,.F.);+#2607=ORIENTED_EDGE('',*,*,#752,.T.);+#2608=ORIENTED_EDGE('',*,*,#2609,.T.);+#2609=EDGE_CURVE('',#753,#2610,#2612,.T.);+#2610=VERTEX_POINT('',#2611);+#2611=CARTESIAN_POINT('',(-4.098480775301,2.97,1.292364817767));+#2612=CIRCLE('',#2613,1.E-01);+#2613=AXIS2_PLACEMENT_3D('',#2614,#1616,#1617);+#2614=CARTESIAN_POINT('',(-4.,2.97,1.275));+#2615=ORIENTED_EDGE('',*,*,#2616,.T.);+#2616=EDGE_CURVE('',#2610,#2617,#2619,.T.);+#2617=VERTEX_POINT('',#2618);+#2618=CARTESIAN_POINT('',(-4.276476480287,2.97,0.2479055467));+#2619=LINE('',#2611,#1623);+#2620=ORIENTED_EDGE('',*,*,#2621,.T.);+#2621=EDGE_CURVE('',#2617,#2622,#2624,.T.);+#2622=VERTEX_POINT('',#2623);+#2623=CARTESIAN_POINT('',(-4.571918806191,2.97,-2.22044604925E-16));+#2624=CIRCLE('',#2625,0.3);+#2625=AXIS2_PLACEMENT_3D('',#2626,#493,#1632);+#2626=CARTESIAN_POINT('',(-4.571918806191,2.97,0.3));+#2627=ORIENTED_EDGE('',*,*,#2628,.T.);+#2628=EDGE_CURVE('',#2622,#2629,#2631,.T.);+#2629=VERTEX_POINT('',#2630);+#2630=CARTESIAN_POINT('',(-5.15,2.97,-2.22044604925E-16));+#2631=LINE('',#2623,#480);+#2632=ORIENTED_EDGE('',*,*,#2633,.T.);+#2633=EDGE_CURVE('',#2629,#2634,#2636,.T.);+#2634=VERTEX_POINT('',#2635);+#2635=CARTESIAN_POINT('',(-5.15,2.97,0.2));+#2636=LINE('',#2630,#466);+#2637=ORIENTED_EDGE('',*,*,#2638,.T.);+#2638=EDGE_CURVE('',#2634,#2639,#2641,.T.);+#2639=VERTEX_POINT('',#2640);+#2640=CARTESIAN_POINT('',(-4.571918806191,2.97,0.2));+#2641=LINE('',#2635,#430);+#2642=ORIENTED_EDGE('',*,*,#2643,.T.);+#2643=EDGE_CURVE('',#2639,#2644,#2646,.T.);+#2644=VERTEX_POINT('',#2645);+#2645=CARTESIAN_POINT('',(-4.47343803089,2.97,0.282635182233));+#2646=CIRCLE('',#2647,1.E-01);+#2647=AXIS2_PLACEMENT_3D('',#2626,#1654,#1655);+#2648=ORIENTED_EDGE('',*,*,#2649,.T.);+#2649=EDGE_CURVE('',#2644,#2650,#2652,.T.);+#2650=VERTEX_POINT('',#2651);+#2651=CARTESIAN_POINT('',(-4.295442325904,2.97,1.3270944533));+#2652=LINE('',#2645,#1661);+#2653=ORIENTED_EDGE('',*,*,#2654,.T.);+#2654=EDGE_CURVE('',#2650,#2655,#2656,.T.);+#2655=VERTEX_POINT('',#2599);+#2656=CIRCLE('',#2657,0.3);+#2657=AXIS2_PLACEMENT_3D('',#2614,#1668,#1669);+#2658=ORIENTED_EDGE('',*,*,#2659,.T.);+#2659=EDGE_CURVE('',#2655,#742,#2598,.T.);+#2660=PLANE('',#2661);+#2661=AXIS2_PLACEMENT_3D('',#2662,#493,#13);+#2662=CARTESIAN_POINT('',(-4.341787690374,2.97,0.743634917138));+#2663=ADVANCED_FACE('',(#2664),#2678,.F.);+#2664=FACE_BOUND('',#2665,.F.);+#2665=EDGE_LOOP('',(#2666,#2667,#2674,#2677));+#2666=ORIENTED_EDGE('',*,*,#765,.T.);+#2667=ORIENTED_EDGE('',*,*,#2668,.T.);+#2668=EDGE_CURVE('',#760,#2669,#2671,.T.);+#2669=VERTEX_POINT('',#2670);+#2670=CARTESIAN_POINT('',(-4.098480775301,3.38,1.292364817767));+#2671=CIRCLE('',#2672,1.E-01);+#2672=AXIS2_PLACEMENT_3D('',#2673,#1616,#1617);+#2673=CARTESIAN_POINT('',(-4.,3.38,1.275));+#2674=ORIENTED_EDGE('',*,*,#2675,.F.);+#2675=EDGE_CURVE('',#2610,#2669,#2676,.T.);+#2676=LINE('',#2611,#492);+#2677=ORIENTED_EDGE('',*,*,#2609,.F.);+#2678=CYLINDRICAL_SURFACE('',#2679,1.E-01);+#2679=AXIS2_PLACEMENT_3D('',#2614,#1692,#1617);+#2680=ADVANCED_FACE('',(#2681),#2730,.T.);+#2681=FACE_BOUND('',#2682,.T.);+#2682=EDGE_LOOP('',(#772,#758,#2667,#2683,#2688,#2695,#2700,#2705,#2710,#2716,#2721,#2727));+#2683=ORIENTED_EDGE('',*,*,#2684,.T.);+#2684=EDGE_CURVE('',#2669,#2685,#2687,.T.);+#2685=VERTEX_POINT('',#2686);+#2686=CARTESIAN_POINT('',(-4.276476480287,3.38,0.2479055467));+#2687=LINE('',#2670,#1623);+#2688=ORIENTED_EDGE('',*,*,#2689,.T.);+#2689=EDGE_CURVE('',#2685,#2690,#2692,.T.);+#2690=VERTEX_POINT('',#2691);+#2691=CARTESIAN_POINT('',(-4.571918806191,3.38,-2.22044604925E-16));+#2692=CIRCLE('',#2693,0.3);+#2693=AXIS2_PLACEMENT_3D('',#2694,#493,#1632);+#2694=CARTESIAN_POINT('',(-4.571918806191,3.38,0.3));+#2695=ORIENTED_EDGE('',*,*,#2696,.T.);+#2696=EDGE_CURVE('',#2690,#2697,#2699,.T.);+#2697=VERTEX_POINT('',#2698);+#2698=CARTESIAN_POINT('',(-5.15,3.38,-2.22044604925E-16));+#2699=LINE('',#2691,#480);+#2700=ORIENTED_EDGE('',*,*,#2701,.T.);+#2701=EDGE_CURVE('',#2697,#2702,#2704,.T.);+#2702=VERTEX_POINT('',#2703);+#2703=CARTESIAN_POINT('',(-5.15,3.38,0.2));+#2704=LINE('',#2698,#466);+#2705=ORIENTED_EDGE('',*,*,#2706,.T.);+#2706=EDGE_CURVE('',#2702,#2707,#2709,.T.);+#2707=VERTEX_POINT('',#2708);+#2708=CARTESIAN_POINT('',(-4.571918806191,3.38,0.2));+#2709=LINE('',#2703,#430);+#2710=ORIENTED_EDGE('',*,*,#2711,.T.);+#2711=EDGE_CURVE('',#2707,#2712,#2714,.T.);+#2712=VERTEX_POINT('',#2713);+#2713=CARTESIAN_POINT('',(-4.47343803089,3.38,0.282635182233));+#2714=CIRCLE('',#2715,1.E-01);+#2715=AXIS2_PLACEMENT_3D('',#2694,#1654,#1655);+#2716=ORIENTED_EDGE('',*,*,#2717,.T.);+#2717=EDGE_CURVE('',#2712,#2718,#2720,.T.);+#2718=VERTEX_POINT('',#2719);+#2719=CARTESIAN_POINT('',(-4.295442325904,3.38,1.3270944533));+#2720=LINE('',#2713,#1661);+#2721=ORIENTED_EDGE('',*,*,#2722,.T.);+#2722=EDGE_CURVE('',#2718,#2723,#2725,.T.);+#2723=VERTEX_POINT('',#2724);+#2724=CARTESIAN_POINT('',(-4.,3.38,1.575));+#2725=CIRCLE('',#2726,0.3);+#2726=AXIS2_PLACEMENT_3D('',#2673,#1668,#1669);+#2727=ORIENTED_EDGE('',*,*,#2728,.T.);+#2728=EDGE_CURVE('',#2723,#774,#2729,.T.);+#2729=LINE('',#2724,#430);+#2730=PLANE('',#2731);+#2731=AXIS2_PLACEMENT_3D('',#2732,#493,#13);+#2732=CARTESIAN_POINT('',(-4.341787690374,3.38,0.743634917138));+#2733=ADVANCED_FACE('',(#2734),#436,.F.);+#2734=FACE_BOUND('',#2735,.F.);+#2735=EDGE_LOOP('',(#2736,#2737,#2741,#2742));+#2736=ORIENTED_EDGE('',*,*,#786,.T.);+#2737=ORIENTED_EDGE('',*,*,#2738,.T.);+#2738=EDGE_CURVE('',#781,#1393,#2739,.T.);+#2739=LINE('',#2740,#430);+#2740=CARTESIAN_POINT('',(-4.,4.24,1.575));+#2741=ORIENTED_EDGE('',*,*,#1392,.F.);+#2742=ORIENTED_EDGE('',*,*,#2743,.F.);+#2743=EDGE_CURVE('',#774,#1389,#2729,.T.);+#2744=ADVANCED_FACE('',(#2745),#2801,.F.);+#2745=FACE_BOUND('',#2746,.F.);+#2746=EDGE_LOOP('',(#2747,#2748,#2749,#2756,#2761,#2768,#2773,#2778,#2783,#2789,#2794,#2799));+#2747=ORIENTED_EDGE('',*,*,#780,.F.);+#2748=ORIENTED_EDGE('',*,*,#791,.T.);+#2749=ORIENTED_EDGE('',*,*,#2750,.T.);+#2750=EDGE_CURVE('',#792,#2751,#2753,.T.);+#2751=VERTEX_POINT('',#2752);+#2752=CARTESIAN_POINT('',(-4.098480775301,4.24,1.292364817767));+#2753=CIRCLE('',#2754,1.E-01);+#2754=AXIS2_PLACEMENT_3D('',#2755,#1616,#1617);+#2755=CARTESIAN_POINT('',(-4.,4.24,1.275));+#2756=ORIENTED_EDGE('',*,*,#2757,.T.);+#2757=EDGE_CURVE('',#2751,#2758,#2760,.T.);+#2758=VERTEX_POINT('',#2759);+#2759=CARTESIAN_POINT('',(-4.276476480287,4.24,0.2479055467));+#2760=LINE('',#2752,#1623);+#2761=ORIENTED_EDGE('',*,*,#2762,.T.);+#2762=EDGE_CURVE('',#2758,#2763,#2765,.T.);+#2763=VERTEX_POINT('',#2764);+#2764=CARTESIAN_POINT('',(-4.571918806191,4.24,-2.22044604925E-16));+#2765=CIRCLE('',#2766,0.3);+#2766=AXIS2_PLACEMENT_3D('',#2767,#493,#1632);+#2767=CARTESIAN_POINT('',(-4.571918806191,4.24,0.3));+#2768=ORIENTED_EDGE('',*,*,#2769,.T.);+#2769=EDGE_CURVE('',#2763,#2770,#2772,.T.);+#2770=VERTEX_POINT('',#2771);+#2771=CARTESIAN_POINT('',(-5.15,4.24,-2.22044604925E-16));+#2772=LINE('',#2764,#480);+#2773=ORIENTED_EDGE('',*,*,#2774,.T.);+#2774=EDGE_CURVE('',#2770,#2775,#2777,.T.);+#2775=VERTEX_POINT('',#2776);+#2776=CARTESIAN_POINT('',(-5.15,4.24,0.2));+#2777=LINE('',#2771,#466);+#2778=ORIENTED_EDGE('',*,*,#2779,.T.);+#2779=EDGE_CURVE('',#2775,#2780,#2782,.T.);+#2780=VERTEX_POINT('',#2781);+#2781=CARTESIAN_POINT('',(-4.571918806191,4.24,0.2));+#2782=LINE('',#2776,#430);+#2783=ORIENTED_EDGE('',*,*,#2784,.T.);+#2784=EDGE_CURVE('',#2780,#2785,#2787,.T.);+#2785=VERTEX_POINT('',#2786);+#2786=CARTESIAN_POINT('',(-4.47343803089,4.24,0.282635182233));+#2787=CIRCLE('',#2788,1.E-01);+#2788=AXIS2_PLACEMENT_3D('',#2767,#1654,#1655);+#2789=ORIENTED_EDGE('',*,*,#2790,.T.);+#2790=EDGE_CURVE('',#2785,#2791,#2793,.T.);+#2791=VERTEX_POINT('',#2792);+#2792=CARTESIAN_POINT('',(-4.295442325904,4.24,1.3270944533));+#2793=LINE('',#2786,#1661);+#2794=ORIENTED_EDGE('',*,*,#2795,.T.);+#2795=EDGE_CURVE('',#2791,#2796,#2797,.T.);+#2796=VERTEX_POINT('',#2740);+#2797=CIRCLE('',#2798,0.3);+#2798=AXIS2_PLACEMENT_3D('',#2755,#1668,#1669);+#2799=ORIENTED_EDGE('',*,*,#2800,.T.);+#2800=EDGE_CURVE('',#2796,#781,#2739,.T.);+#2801=PLANE('',#2802);+#2802=AXIS2_PLACEMENT_3D('',#2803,#493,#13);+#2803=CARTESIAN_POINT('',(-4.341787690374,4.24,0.743634917138));+#2804=ADVANCED_FACE('',(#2805),#2819,.F.);+#2805=FACE_BOUND('',#2806,.F.);+#2806=EDGE_LOOP('',(#2807,#2808,#2815,#2818));+#2807=ORIENTED_EDGE('',*,*,#804,.T.);+#2808=ORIENTED_EDGE('',*,*,#2809,.T.);+#2809=EDGE_CURVE('',#799,#2810,#2812,.T.);+#2810=VERTEX_POINT('',#2811);+#2811=CARTESIAN_POINT('',(-4.098480775301,4.65,1.292364817767));+#2812=CIRCLE('',#2813,1.E-01);+#2813=AXIS2_PLACEMENT_3D('',#2814,#1616,#1617);+#2814=CARTESIAN_POINT('',(-4.,4.65,1.275));+#2815=ORIENTED_EDGE('',*,*,#2816,.F.);+#2816=EDGE_CURVE('',#2751,#2810,#2817,.T.);+#2817=LINE('',#2752,#492);+#2818=ORIENTED_EDGE('',*,*,#2750,.F.);+#2819=CYLINDRICAL_SURFACE('',#2820,1.E-01);+#2820=AXIS2_PLACEMENT_3D('',#2755,#1692,#1617);+#2821=ADVANCED_FACE('',(#2822),#2871,.T.);+#2822=FACE_BOUND('',#2823,.T.);+#2823=EDGE_LOOP('',(#811,#797,#2808,#2824,#2829,#2836,#2841,#2846,#2851,#2857,#2862,#2868));+#2824=ORIENTED_EDGE('',*,*,#2825,.T.);+#2825=EDGE_CURVE('',#2810,#2826,#2828,.T.);+#2826=VERTEX_POINT('',#2827);+#2827=CARTESIAN_POINT('',(-4.276476480287,4.65,0.2479055467));+#2828=LINE('',#2811,#1623);+#2829=ORIENTED_EDGE('',*,*,#2830,.T.);+#2830=EDGE_CURVE('',#2826,#2831,#2833,.T.);+#2831=VERTEX_POINT('',#2832);+#2832=CARTESIAN_POINT('',(-4.571918806191,4.65,-2.22044604925E-16));+#2833=CIRCLE('',#2834,0.3);+#2834=AXIS2_PLACEMENT_3D('',#2835,#493,#1632);+#2835=CARTESIAN_POINT('',(-4.571918806191,4.65,0.3));+#2836=ORIENTED_EDGE('',*,*,#2837,.T.);+#2837=EDGE_CURVE('',#2831,#2838,#2840,.T.);+#2838=VERTEX_POINT('',#2839);+#2839=CARTESIAN_POINT('',(-5.15,4.65,-2.22044604925E-16));+#2840=LINE('',#2832,#480);+#2841=ORIENTED_EDGE('',*,*,#2842,.T.);+#2842=EDGE_CURVE('',#2838,#2843,#2845,.T.);+#2843=VERTEX_POINT('',#2844);+#2844=CARTESIAN_POINT('',(-5.15,4.65,0.2));+#2845=LINE('',#2839,#466);+#2846=ORIENTED_EDGE('',*,*,#2847,.T.);+#2847=EDGE_CURVE('',#2843,#2848,#2850,.T.);+#2848=VERTEX_POINT('',#2849);+#2849=CARTESIAN_POINT('',(-4.571918806191,4.65,0.2));+#2850=LINE('',#2844,#430);+#2851=ORIENTED_EDGE('',*,*,#2852,.T.);+#2852=EDGE_CURVE('',#2848,#2853,#2855,.T.);+#2853=VERTEX_POINT('',#2854);+#2854=CARTESIAN_POINT('',(-4.47343803089,4.65,0.282635182233));+#2855=CIRCLE('',#2856,1.E-01);+#2856=AXIS2_PLACEMENT_3D('',#2835,#1654,#1655);+#2857=ORIENTED_EDGE('',*,*,#2858,.T.);+#2858=EDGE_CURVE('',#2853,#2859,#2861,.T.);+#2859=VERTEX_POINT('',#2860);+#2860=CARTESIAN_POINT('',(-4.295442325904,4.65,1.3270944533));+#2861=LINE('',#2854,#1661);+#2862=ORIENTED_EDGE('',*,*,#2863,.T.);+#2863=EDGE_CURVE('',#2859,#2864,#2866,.T.);+#2864=VERTEX_POINT('',#2865);+#2865=CARTESIAN_POINT('',(-4.,4.65,1.575));+#2866=CIRCLE('',#2867,0.3);+#2867=AXIS2_PLACEMENT_3D('',#2814,#1668,#1669);+#2868=ORIENTED_EDGE('',*,*,#2869,.T.);+#2869=EDGE_CURVE('',#2864,#813,#2870,.T.);+#2870=LINE('',#2865,#430);+#2871=PLANE('',#2872);+#2872=AXIS2_PLACEMENT_3D('',#2873,#493,#13);+#2873=CARTESIAN_POINT('',(-4.341787690374,4.65,0.743634917138));+#2874=ADVANCED_FACE('',(#2875),#436,.F.);+#2875=FACE_BOUND('',#2876,.F.);+#2876=EDGE_LOOP('',(#2877,#2878,#2879,#2880));+#2877=ORIENTED_EDGE('',*,*,#825,.T.);+#2878=ORIENTED_EDGE('',*,*,#1319,.T.);+#2879=ORIENTED_EDGE('',*,*,#1400,.F.);+#2880=ORIENTED_EDGE('',*,*,#2881,.F.);+#2881=EDGE_CURVE('',#813,#1397,#2870,.T.);+#2882=ADVANCED_FACE('',(#2883),#2937,.F.);+#2883=FACE_BOUND('',#2884,.F.);+#2884=EDGE_LOOP('',(#2885,#2886,#2887,#2894,#2899,#2906,#2911,#2916,#2921,#2927,#2932,#2936));+#2885=ORIENTED_EDGE('',*,*,#819,.F.);+#2886=ORIENTED_EDGE('',*,*,#830,.T.);+#2887=ORIENTED_EDGE('',*,*,#2888,.T.);+#2888=EDGE_CURVE('',#831,#2889,#2891,.T.);+#2889=VERTEX_POINT('',#2890);+#2890=CARTESIAN_POINT('',(-4.098480775301,5.51,1.292364817767));+#2891=CIRCLE('',#2892,1.E-01);+#2892=AXIS2_PLACEMENT_3D('',#2893,#1616,#1617);+#2893=CARTESIAN_POINT('',(-4.,5.51,1.275));+#2894=ORIENTED_EDGE('',*,*,#2895,.T.);+#2895=EDGE_CURVE('',#2889,#2896,#2898,.T.);+#2896=VERTEX_POINT('',#2897);+#2897=CARTESIAN_POINT('',(-4.276476480287,5.51,0.2479055467));+#2898=LINE('',#2890,#1623);+#2899=ORIENTED_EDGE('',*,*,#2900,.T.);+#2900=EDGE_CURVE('',#2896,#2901,#2903,.T.);+#2901=VERTEX_POINT('',#2902);+#2902=CARTESIAN_POINT('',(-4.571918806191,5.51,-2.22044604925E-16));+#2903=CIRCLE('',#2904,0.3);+#2904=AXIS2_PLACEMENT_3D('',#2905,#493,#1632);+#2905=CARTESIAN_POINT('',(-4.571918806191,5.51,0.3));+#2906=ORIENTED_EDGE('',*,*,#2907,.T.);+#2907=EDGE_CURVE('',#2901,#2908,#2910,.T.);+#2908=VERTEX_POINT('',#2909);+#2909=CARTESIAN_POINT('',(-5.15,5.51,-2.22044604925E-16));+#2910=LINE('',#2902,#480);+#2911=ORIENTED_EDGE('',*,*,#2912,.T.);+#2912=EDGE_CURVE('',#2908,#2913,#2915,.T.);+#2913=VERTEX_POINT('',#2914);+#2914=CARTESIAN_POINT('',(-5.15,5.51,0.2));+#2915=LINE('',#2909,#466);+#2916=ORIENTED_EDGE('',*,*,#2917,.T.);+#2917=EDGE_CURVE('',#2913,#2918,#2920,.T.);+#2918=VERTEX_POINT('',#2919);+#2919=CARTESIAN_POINT('',(-4.571918806191,5.51,0.2));+#2920=LINE('',#2914,#430);+#2921=ORIENTED_EDGE('',*,*,#2922,.T.);+#2922=EDGE_CURVE('',#2918,#2923,#2925,.T.);+#2923=VERTEX_POINT('',#2924);+#2924=CARTESIAN_POINT('',(-4.47343803089,5.51,0.282635182233));+#2925=CIRCLE('',#2926,1.E-01);+#2926=AXIS2_PLACEMENT_3D('',#2905,#1654,#1655);+#2927=ORIENTED_EDGE('',*,*,#2928,.T.);+#2928=EDGE_CURVE('',#2923,#2929,#2931,.T.);+#2929=VERTEX_POINT('',#2930);+#2930=CARTESIAN_POINT('',(-4.295442325904,5.51,1.3270944533));+#2931=LINE('',#2924,#1661);+#2932=ORIENTED_EDGE('',*,*,#2933,.T.);+#2933=EDGE_CURVE('',#2929,#1304,#2934,.T.);+#2934=CIRCLE('',#2935,0.3);+#2935=AXIS2_PLACEMENT_3D('',#2893,#1668,#1669);+#2936=ORIENTED_EDGE('',*,*,#1303,.T.);+#2937=PLANE('',#2938);+#2938=AXIS2_PLACEMENT_3D('',#2939,#493,#13);+#2939=CARTESIAN_POINT('',(-4.341787690374,5.51,0.743634917138));+#2940=ADVANCED_FACE('',(#2941),#2955,.F.);+#2941=FACE_BOUND('',#2942,.F.);+#2942=EDGE_LOOP('',(#2943,#2944,#2951,#2954));+#2943=ORIENTED_EDGE('',*,*,#843,.T.);+#2944=ORIENTED_EDGE('',*,*,#2945,.T.);+#2945=EDGE_CURVE('',#838,#2946,#2948,.T.);+#2946=VERTEX_POINT('',#2947);+#2947=CARTESIAN_POINT('',(-4.098480775301,5.92,1.292364817767));+#2948=CIRCLE('',#2949,1.E-01);+#2949=AXIS2_PLACEMENT_3D('',#2950,#1616,#1617);+#2950=CARTESIAN_POINT('',(-4.,5.92,1.275));+#2951=ORIENTED_EDGE('',*,*,#2952,.F.);+#2952=EDGE_CURVE('',#2889,#2946,#2953,.T.);+#2953=LINE('',#2890,#492);+#2954=ORIENTED_EDGE('',*,*,#2888,.F.);+#2955=CYLINDRICAL_SURFACE('',#2956,1.E-01);+#2956=AXIS2_PLACEMENT_3D('',#2893,#1692,#1617);+#2957=ADVANCED_FACE('',(#2958),#3002,.T.);+#2958=FACE_BOUND('',#2959,.T.);+#2959=EDGE_LOOP('',(#850,#836,#2944,#2960,#2965,#2972,#2977,#2982,#2987,#2993,#2998,#1311));+#2960=ORIENTED_EDGE('',*,*,#2961,.T.);+#2961=EDGE_CURVE('',#2946,#2962,#2964,.T.);+#2962=VERTEX_POINT('',#2963);+#2963=CARTESIAN_POINT('',(-4.276476480287,5.92,0.2479055467));+#2964=LINE('',#2947,#1623);+#2965=ORIENTED_EDGE('',*,*,#2966,.T.);+#2966=EDGE_CURVE('',#2962,#2967,#2969,.T.);+#2967=VERTEX_POINT('',#2968);+#2968=CARTESIAN_POINT('',(-4.571918806191,5.92,-2.22044604925E-16));+#2969=CIRCLE('',#2970,0.3);+#2970=AXIS2_PLACEMENT_3D('',#2971,#493,#1632);+#2971=CARTESIAN_POINT('',(-4.571918806191,5.92,0.3));+#2972=ORIENTED_EDGE('',*,*,#2973,.T.);+#2973=EDGE_CURVE('',#2967,#2974,#2976,.T.);+#2974=VERTEX_POINT('',#2975);+#2975=CARTESIAN_POINT('',(-5.15,5.92,-2.22044604925E-16));+#2976=LINE('',#2968,#480);+#2977=ORIENTED_EDGE('',*,*,#2978,.T.);+#2978=EDGE_CURVE('',#2974,#2979,#2981,.T.);+#2979=VERTEX_POINT('',#2980);+#2980=CARTESIAN_POINT('',(-5.15,5.92,0.2));+#2981=LINE('',#2975,#466);+#2982=ORIENTED_EDGE('',*,*,#2983,.T.);+#2983=EDGE_CURVE('',#2979,#2984,#2986,.T.);+#2984=VERTEX_POINT('',#2985);+#2985=CARTESIAN_POINT('',(-4.571918806191,5.92,0.2));+#2986=LINE('',#2980,#430);+#2987=ORIENTED_EDGE('',*,*,#2988,.T.);+#2988=EDGE_CURVE('',#2984,#2989,#2991,.T.);+#2989=VERTEX_POINT('',#2990);+#2990=CARTESIAN_POINT('',(-4.47343803089,5.92,0.282635182233));+#2991=CIRCLE('',#2992,1.E-01);+#2992=AXIS2_PLACEMENT_3D('',#2971,#1654,#1655);+#2993=ORIENTED_EDGE('',*,*,#2994,.T.);+#2994=EDGE_CURVE('',#2989,#2995,#2997,.T.);+#2995=VERTEX_POINT('',#2996);+#2996=CARTESIAN_POINT('',(-4.295442325904,5.92,1.3270944533));+#2997=LINE('',#2990,#1661);+#2998=ORIENTED_EDGE('',*,*,#2999,.T.);+#2999=EDGE_CURVE('',#2995,#1309,#3000,.T.);+#3000=CIRCLE('',#3001,0.3);+#3001=AXIS2_PLACEMENT_3D('',#2950,#1668,#1669);+#3002=PLANE('',#3003);+#3003=AXIS2_PLACEMENT_3D('',#3004,#493,#13);+#3004=CARTESIAN_POINT('',(-4.341787690374,5.92,0.743634917138));+#3005=ADVANCED_FACE('',(#3006),#3068,.F.);+#3006=FACE_BOUND('',#3007,.F.);+#3007=EDGE_LOOP('',(#3008,#3009,#3010,#3018,#3025,#3033,#3038,#3043,#3048,#3055,#3062,#3067));+#3008=ORIENTED_EDGE('',*,*,#863,.F.);+#3009=ORIENTED_EDGE('',*,*,#873,.T.);+#3010=ORIENTED_EDGE('',*,*,#3011,.T.);+#3011=EDGE_CURVE('',#874,#3012,#3014,.T.);+#3012=VERTEX_POINT('',#3013);+#3013=CARTESIAN_POINT('',(4.098480775301,5.92,1.292364817767));+#3014=CIRCLE('',#3015,1.E-01);+#3015=AXIS2_PLACEMENT_3D('',#3016,#87,#3017);+#3016=CARTESIAN_POINT('',(4.,5.92,1.275));+#3017=DIRECTION('',(-8.881784197001E-15,-9.860761315263E-31,1.));+#3018=ORIENTED_EDGE('',*,*,#3019,.T.);+#3019=EDGE_CURVE('',#3012,#3020,#3022,.T.);+#3020=VERTEX_POINT('',#3021);+#3021=CARTESIAN_POINT('',(4.276476480287,5.92,0.2479055467));+#3022=LINE('',#3013,#3023);+#3023=VECTOR('',#3024,1.);+#3024=DIRECTION('',(0.167996923731,1.865140527918E-17,-0.985787519508));+#3025=ORIENTED_EDGE('',*,*,#3026,.T.);+#3026=EDGE_CURVE('',#3020,#3027,#3029,.T.);+#3027=VERTEX_POINT('',#3028);+#3028=CARTESIAN_POINT('',(4.571918806191,5.92,-2.22044604925E-16));+#3029=CIRCLE('',#3030,0.3);+#3030=AXIS2_PLACEMENT_3D('',#3031,#59,#3032);+#3031=CARTESIAN_POINT('',(4.571918806191,5.92,0.3));+#3032=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#3033=ORIENTED_EDGE('',*,*,#3034,.T.);+#3034=EDGE_CURVE('',#3027,#3035,#3037,.T.);+#3035=VERTEX_POINT('',#3036);+#3036=CARTESIAN_POINT('',(5.15,5.92,-2.22044604925E-16));+#3037=LINE('',#3028,#27);+#3038=ORIENTED_EDGE('',*,*,#3039,.T.);+#3039=EDGE_CURVE('',#3035,#3040,#3042,.T.);+#3040=VERTEX_POINT('',#3041);+#3041=CARTESIAN_POINT('',(5.15,5.92,0.2));+#3042=LINE('',#3036,#466);+#3043=ORIENTED_EDGE('',*,*,#3044,.T.);+#3044=EDGE_CURVE('',#3040,#3045,#3047,.T.);+#3045=VERTEX_POINT('',#3046);+#3046=CARTESIAN_POINT('',(4.571918806191,5.92,0.2));+#3047=LINE('',#3041,#72);+#3048=ORIENTED_EDGE('',*,*,#3049,.T.);+#3049=EDGE_CURVE('',#3045,#3050,#3052,.T.);+#3050=VERTEX_POINT('',#3051);+#3051=CARTESIAN_POINT('',(4.47343803089,5.92,0.282635182233));+#3052=CIRCLE('',#3053,1.E-01);+#3053=AXIS2_PLACEMENT_3D('',#3031,#87,#3054);+#3054=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#3055=ORIENTED_EDGE('',*,*,#3056,.T.);+#3056=EDGE_CURVE('',#3050,#3057,#3059,.T.);+#3057=VERTEX_POINT('',#3058);+#3058=CARTESIAN_POINT('',(4.295442325904,5.92,1.3270944533));+#3059=LINE('',#3051,#3060);+#3060=VECTOR('',#3061,1.);+#3061=DIRECTION('',(-0.167996923731,-1.865140527918E-17,0.985787519508));+#3062=ORIENTED_EDGE('',*,*,#3063,.T.);+#3063=EDGE_CURVE('',#3057,#1558,#3064,.T.);+#3064=CIRCLE('',#3065,0.3);+#3065=AXIS2_PLACEMENT_3D('',#3016,#59,#3066);+#3066=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#3067=ORIENTED_EDGE('',*,*,#1557,.T.);+#3068=PLANE('',#3069);+#3069=AXIS2_PLACEMENT_3D('',#3070,#59,#13);+#3070=CARTESIAN_POINT('',(4.341787690374,5.92,0.743634917138));+#3071=ADVANCED_FACE('',(#3072),#3086,.F.);+#3072=FACE_BOUND('',#3073,.F.);+#3073=EDGE_LOOP('',(#3074,#3075,#3082,#3085));+#3074=ORIENTED_EDGE('',*,*,#886,.T.);+#3075=ORIENTED_EDGE('',*,*,#3076,.T.);+#3076=EDGE_CURVE('',#881,#3077,#3079,.T.);+#3077=VERTEX_POINT('',#3078);+#3078=CARTESIAN_POINT('',(4.098480775301,5.51,1.292364817767));+#3079=CIRCLE('',#3080,1.E-01);+#3080=AXIS2_PLACEMENT_3D('',#3081,#87,#3017);+#3081=CARTESIAN_POINT('',(4.,5.51,1.275));+#3082=ORIENTED_EDGE('',*,*,#3083,.F.);+#3083=EDGE_CURVE('',#3012,#3077,#3084,.T.);+#3084=LINE('',#3013,#58);+#3085=ORIENTED_EDGE('',*,*,#3011,.F.);+#3086=CYLINDRICAL_SURFACE('',#3015,1.E-01);+#3087=ADVANCED_FACE('',(#3088),#3132,.T.);+#3088=FACE_BOUND('',#3089,.T.);+#3089=EDGE_LOOP('',(#893,#879,#3075,#3090,#3095,#3102,#3107,#3112,#3117,#3123,#3128,#1564));+#3090=ORIENTED_EDGE('',*,*,#3091,.T.);+#3091=EDGE_CURVE('',#3077,#3092,#3094,.T.);+#3092=VERTEX_POINT('',#3093);+#3093=CARTESIAN_POINT('',(4.276476480287,5.51,0.2479055467));+#3094=LINE('',#3078,#3023);+#3095=ORIENTED_EDGE('',*,*,#3096,.T.);+#3096=EDGE_CURVE('',#3092,#3097,#3099,.T.);+#3097=VERTEX_POINT('',#3098);+#3098=CARTESIAN_POINT('',(4.571918806191,5.51,-2.22044604925E-16));+#3099=CIRCLE('',#3100,0.3);+#3100=AXIS2_PLACEMENT_3D('',#3101,#59,#3032);+#3101=CARTESIAN_POINT('',(4.571918806191,5.51,0.3));+#3102=ORIENTED_EDGE('',*,*,#3103,.T.);+#3103=EDGE_CURVE('',#3097,#3104,#3106,.T.);+#3104=VERTEX_POINT('',#3105);+#3105=CARTESIAN_POINT('',(5.15,5.51,-2.22044604925E-16));+#3106=LINE('',#3098,#27);+#3107=ORIENTED_EDGE('',*,*,#3108,.T.);+#3108=EDGE_CURVE('',#3104,#3109,#3111,.T.);+#3109=VERTEX_POINT('',#3110);+#3110=CARTESIAN_POINT('',(5.15,5.51,0.2));+#3111=LINE('',#3105,#466);+#3112=ORIENTED_EDGE('',*,*,#3113,.T.);+#3113=EDGE_CURVE('',#3109,#3114,#3116,.T.);+#3114=VERTEX_POINT('',#3115);+#3115=CARTESIAN_POINT('',(4.571918806191,5.51,0.2));+#3116=LINE('',#3110,#72);+#3117=ORIENTED_EDGE('',*,*,#3118,.T.);+#3118=EDGE_CURVE('',#3114,#3119,#3121,.T.);+#3119=VERTEX_POINT('',#3120);+#3120=CARTESIAN_POINT('',(4.47343803089,5.51,0.282635182233));+#3121=CIRCLE('',#3122,1.E-01);+#3122=AXIS2_PLACEMENT_3D('',#3101,#87,#3054);+#3123=ORIENTED_EDGE('',*,*,#3124,.T.);+#3124=EDGE_CURVE('',#3119,#3125,#3127,.T.);+#3125=VERTEX_POINT('',#3126);+#3126=CARTESIAN_POINT('',(4.295442325904,5.51,1.3270944533));+#3127=LINE('',#3120,#3060);+#3128=ORIENTED_EDGE('',*,*,#3129,.T.);+#3129=EDGE_CURVE('',#3125,#1561,#3130,.T.);+#3130=CIRCLE('',#3131,0.3);+#3131=AXIS2_PLACEMENT_3D('',#3081,#59,#3066);+#3132=PLANE('',#3133);+#3133=AXIS2_PLACEMENT_3D('',#3134,#59,#13);+#3134=CARTESIAN_POINT('',(4.341787690374,5.51,0.743634917138));+#3135=ADVANCED_FACE('',(#3136),#436,.F.);+#3136=FACE_BOUND('',#3137,.F.);+#3137=EDGE_LOOP('',(#3138,#3139,#3140,#3144));+#3138=ORIENTED_EDGE('',*,*,#1568,.F.);+#3139=ORIENTED_EDGE('',*,*,#907,.T.);+#3140=ORIENTED_EDGE('',*,*,#3141,.T.);+#3141=EDGE_CURVE('',#902,#1469,#3142,.T.);+#3142=LINE('',#3143,#72);+#3143=CARTESIAN_POINT('',(4.,4.65,1.575));+#3144=ORIENTED_EDGE('',*,*,#1468,.F.);+#3145=ADVANCED_FACE('',(#3146),#3202,.F.);+#3146=FACE_BOUND('',#3147,.F.);+#3147=EDGE_LOOP('',(#3148,#3149,#3150,#3157,#3162,#3169,#3174,#3179,#3184,#3190,#3195,#3200));+#3148=ORIENTED_EDGE('',*,*,#901,.F.);+#3149=ORIENTED_EDGE('',*,*,#912,.T.);+#3150=ORIENTED_EDGE('',*,*,#3151,.T.);+#3151=EDGE_CURVE('',#913,#3152,#3154,.T.);+#3152=VERTEX_POINT('',#3153);+#3153=CARTESIAN_POINT('',(4.098480775301,4.65,1.292364817767));+#3154=CIRCLE('',#3155,1.E-01);+#3155=AXIS2_PLACEMENT_3D('',#3156,#87,#3017);+#3156=CARTESIAN_POINT('',(4.,4.65,1.275));+#3157=ORIENTED_EDGE('',*,*,#3158,.T.);+#3158=EDGE_CURVE('',#3152,#3159,#3161,.T.);+#3159=VERTEX_POINT('',#3160);+#3160=CARTESIAN_POINT('',(4.276476480287,4.65,0.2479055467));+#3161=LINE('',#3153,#3023);+#3162=ORIENTED_EDGE('',*,*,#3163,.T.);+#3163=EDGE_CURVE('',#3159,#3164,#3166,.T.);+#3164=VERTEX_POINT('',#3165);+#3165=CARTESIAN_POINT('',(4.571918806191,4.65,-2.22044604925E-16));+#3166=CIRCLE('',#3167,0.3);+#3167=AXIS2_PLACEMENT_3D('',#3168,#59,#3032);+#3168=CARTESIAN_POINT('',(4.571918806191,4.65,0.3));+#3169=ORIENTED_EDGE('',*,*,#3170,.T.);+#3170=EDGE_CURVE('',#3164,#3171,#3173,.T.);+#3171=VERTEX_POINT('',#3172);+#3172=CARTESIAN_POINT('',(5.15,4.65,-2.22044604925E-16));+#3173=LINE('',#3165,#27);+#3174=ORIENTED_EDGE('',*,*,#3175,.T.);+#3175=EDGE_CURVE('',#3171,#3176,#3178,.T.);+#3176=VERTEX_POINT('',#3177);+#3177=CARTESIAN_POINT('',(5.15,4.65,0.2));+#3178=LINE('',#3172,#466);+#3179=ORIENTED_EDGE('',*,*,#3180,.T.);+#3180=EDGE_CURVE('',#3176,#3181,#3183,.T.);+#3181=VERTEX_POINT('',#3182);+#3182=CARTESIAN_POINT('',(4.571918806191,4.65,0.2));+#3183=LINE('',#3177,#72);+#3184=ORIENTED_EDGE('',*,*,#3185,.T.);+#3185=EDGE_CURVE('',#3181,#3186,#3188,.T.);+#3186=VERTEX_POINT('',#3187);+#3187=CARTESIAN_POINT('',(4.47343803089,4.65,0.282635182233));+#3188=CIRCLE('',#3189,1.E-01);+#3189=AXIS2_PLACEMENT_3D('',#3168,#87,#3054);+#3190=ORIENTED_EDGE('',*,*,#3191,.T.);+#3191=EDGE_CURVE('',#3186,#3192,#3194,.T.);+#3192=VERTEX_POINT('',#3193);+#3193=CARTESIAN_POINT('',(4.295442325904,4.65,1.3270944533));+#3194=LINE('',#3187,#3060);+#3195=ORIENTED_EDGE('',*,*,#3196,.T.);+#3196=EDGE_CURVE('',#3192,#3197,#3198,.T.);+#3197=VERTEX_POINT('',#3143);+#3198=CIRCLE('',#3199,0.3);+#3199=AXIS2_PLACEMENT_3D('',#3156,#59,#3066);+#3200=ORIENTED_EDGE('',*,*,#3201,.T.);+#3201=EDGE_CURVE('',#3197,#902,#3142,.T.);+#3202=PLANE('',#3203);+#3203=AXIS2_PLACEMENT_3D('',#3204,#59,#13);+#3204=CARTESIAN_POINT('',(4.341787690374,4.65,0.743634917138));+#3205=ADVANCED_FACE('',(#3206),#3220,.F.);+#3206=FACE_BOUND('',#3207,.F.);+#3207=EDGE_LOOP('',(#3208,#3209,#3216,#3219));+#3208=ORIENTED_EDGE('',*,*,#925,.T.);+#3209=ORIENTED_EDGE('',*,*,#3210,.T.);+#3210=EDGE_CURVE('',#920,#3211,#3213,.T.);+#3211=VERTEX_POINT('',#3212);+#3212=CARTESIAN_POINT('',(4.098480775301,4.24,1.292364817767));+#3213=CIRCLE('',#3214,1.E-01);+#3214=AXIS2_PLACEMENT_3D('',#3215,#87,#3017);+#3215=CARTESIAN_POINT('',(4.,4.24,1.275));+#3216=ORIENTED_EDGE('',*,*,#3217,.F.);+#3217=EDGE_CURVE('',#3152,#3211,#3218,.T.);+#3218=LINE('',#3153,#58);+#3219=ORIENTED_EDGE('',*,*,#3151,.F.);+#3220=CYLINDRICAL_SURFACE('',#3155,1.E-01);+#3221=ADVANCED_FACE('',(#3222),#3271,.T.);+#3222=FACE_BOUND('',#3223,.T.);+#3223=EDGE_LOOP('',(#932,#918,#3209,#3224,#3229,#3236,#3241,#3246,#3251,#3257,#3262,#3268));+#3224=ORIENTED_EDGE('',*,*,#3225,.T.);+#3225=EDGE_CURVE('',#3211,#3226,#3228,.T.);+#3226=VERTEX_POINT('',#3227);+#3227=CARTESIAN_POINT('',(4.276476480287,4.24,0.2479055467));+#3228=LINE('',#3212,#3023);+#3229=ORIENTED_EDGE('',*,*,#3230,.T.);+#3230=EDGE_CURVE('',#3226,#3231,#3233,.T.);+#3231=VERTEX_POINT('',#3232);+#3232=CARTESIAN_POINT('',(4.571918806191,4.24,-2.22044604925E-16));+#3233=CIRCLE('',#3234,0.3);+#3234=AXIS2_PLACEMENT_3D('',#3235,#59,#3032);+#3235=CARTESIAN_POINT('',(4.571918806191,4.24,0.3));+#3236=ORIENTED_EDGE('',*,*,#3237,.T.);+#3237=EDGE_CURVE('',#3231,#3238,#3240,.T.);+#3238=VERTEX_POINT('',#3239);+#3239=CARTESIAN_POINT('',(5.15,4.24,-2.22044604925E-16));+#3240=LINE('',#3232,#27);+#3241=ORIENTED_EDGE('',*,*,#3242,.T.);+#3242=EDGE_CURVE('',#3238,#3243,#3245,.T.);+#3243=VERTEX_POINT('',#3244);+#3244=CARTESIAN_POINT('',(5.15,4.24,0.2));+#3245=LINE('',#3239,#466);+#3246=ORIENTED_EDGE('',*,*,#3247,.T.);+#3247=EDGE_CURVE('',#3243,#3248,#3250,.T.);+#3248=VERTEX_POINT('',#3249);+#3249=CARTESIAN_POINT('',(4.571918806191,4.24,0.2));+#3250=LINE('',#3244,#72);+#3251=ORIENTED_EDGE('',*,*,#3252,.T.);+#3252=EDGE_CURVE('',#3248,#3253,#3255,.T.);+#3253=VERTEX_POINT('',#3254);+#3254=CARTESIAN_POINT('',(4.47343803089,4.24,0.282635182233));+#3255=CIRCLE('',#3256,1.E-01);+#3256=AXIS2_PLACEMENT_3D('',#3235,#87,#3054);+#3257=ORIENTED_EDGE('',*,*,#3258,.T.);+#3258=EDGE_CURVE('',#3253,#3259,#3261,.T.);+#3259=VERTEX_POINT('',#3260);+#3260=CARTESIAN_POINT('',(4.295442325904,4.24,1.3270944533));+#3261=LINE('',#3254,#3060);+#3262=ORIENTED_EDGE('',*,*,#3263,.T.);+#3263=EDGE_CURVE('',#3259,#3264,#3266,.T.);+#3264=VERTEX_POINT('',#3265);+#3265=CARTESIAN_POINT('',(4.,4.24,1.575));+#3266=CIRCLE('',#3267,0.3);+#3267=AXIS2_PLACEMENT_3D('',#3215,#59,#3066);+#3268=ORIENTED_EDGE('',*,*,#3269,.T.);+#3269=EDGE_CURVE('',#3264,#934,#3270,.T.);+#3270=LINE('',#3265,#72);+#3271=PLANE('',#3272);+#3272=AXIS2_PLACEMENT_3D('',#3273,#59,#13);+#3273=CARTESIAN_POINT('',(4.341787690374,4.24,0.743634917138));+#3274=ADVANCED_FACE('',(#3275),#436,.F.);+#3275=FACE_BOUND('',#3276,.F.);+#3276=EDGE_LOOP('',(#3277,#3279,#3280,#3284));+#3277=ORIENTED_EDGE('',*,*,#3278,.F.);+#3278=EDGE_CURVE('',#934,#1473,#3270,.T.);+#3279=ORIENTED_EDGE('',*,*,#946,.T.);+#3280=ORIENTED_EDGE('',*,*,#3281,.T.);+#3281=EDGE_CURVE('',#941,#1477,#3282,.T.);+#3282=LINE('',#3283,#72);+#3283=CARTESIAN_POINT('',(4.,3.38,1.575));+#3284=ORIENTED_EDGE('',*,*,#1476,.F.);+#3285=ADVANCED_FACE('',(#3286),#3342,.F.);+#3286=FACE_BOUND('',#3287,.F.);+#3287=EDGE_LOOP('',(#3288,#3289,#3290,#3297,#3302,#3309,#3314,#3319,#3324,#3330,#3335,#3340));+#3288=ORIENTED_EDGE('',*,*,#940,.F.);+#3289=ORIENTED_EDGE('',*,*,#951,.T.);+#3290=ORIENTED_EDGE('',*,*,#3291,.T.);+#3291=EDGE_CURVE('',#952,#3292,#3294,.T.);+#3292=VERTEX_POINT('',#3293);+#3293=CARTESIAN_POINT('',(4.098480775301,3.38,1.292364817767));+#3294=CIRCLE('',#3295,1.E-01);+#3295=AXIS2_PLACEMENT_3D('',#3296,#87,#3017);+#3296=CARTESIAN_POINT('',(4.,3.38,1.275));+#3297=ORIENTED_EDGE('',*,*,#3298,.T.);+#3298=EDGE_CURVE('',#3292,#3299,#3301,.T.);+#3299=VERTEX_POINT('',#3300);+#3300=CARTESIAN_POINT('',(4.276476480287,3.38,0.2479055467));+#3301=LINE('',#3293,#3023);+#3302=ORIENTED_EDGE('',*,*,#3303,.T.);+#3303=EDGE_CURVE('',#3299,#3304,#3306,.T.);+#3304=VERTEX_POINT('',#3305);+#3305=CARTESIAN_POINT('',(4.571918806191,3.38,-2.22044604925E-16));+#3306=CIRCLE('',#3307,0.3);+#3307=AXIS2_PLACEMENT_3D('',#3308,#59,#3032);+#3308=CARTESIAN_POINT('',(4.571918806191,3.38,0.3));+#3309=ORIENTED_EDGE('',*,*,#3310,.T.);+#3310=EDGE_CURVE('',#3304,#3311,#3313,.T.);+#3311=VERTEX_POINT('',#3312);+#3312=CARTESIAN_POINT('',(5.15,3.38,-2.22044604925E-16));+#3313=LINE('',#3305,#27);+#3314=ORIENTED_EDGE('',*,*,#3315,.T.);+#3315=EDGE_CURVE('',#3311,#3316,#3318,.T.);+#3316=VERTEX_POINT('',#3317);+#3317=CARTESIAN_POINT('',(5.15,3.38,0.2));+#3318=LINE('',#3312,#466);+#3319=ORIENTED_EDGE('',*,*,#3320,.T.);+#3320=EDGE_CURVE('',#3316,#3321,#3323,.T.);+#3321=VERTEX_POINT('',#3322);+#3322=CARTESIAN_POINT('',(4.571918806191,3.38,0.2));+#3323=LINE('',#3317,#72);+#3324=ORIENTED_EDGE('',*,*,#3325,.T.);+#3325=EDGE_CURVE('',#3321,#3326,#3328,.T.);+#3326=VERTEX_POINT('',#3327);+#3327=CARTESIAN_POINT('',(4.47343803089,3.38,0.282635182233));+#3328=CIRCLE('',#3329,1.E-01);+#3329=AXIS2_PLACEMENT_3D('',#3308,#87,#3054);+#3330=ORIENTED_EDGE('',*,*,#3331,.T.);+#3331=EDGE_CURVE('',#3326,#3332,#3334,.T.);+#3332=VERTEX_POINT('',#3333);+#3333=CARTESIAN_POINT('',(4.295442325904,3.38,1.3270944533));+#3334=LINE('',#3327,#3060);+#3335=ORIENTED_EDGE('',*,*,#3336,.T.);+#3336=EDGE_CURVE('',#3332,#3337,#3338,.T.);+#3337=VERTEX_POINT('',#3283);+#3338=CIRCLE('',#3339,0.3);+#3339=AXIS2_PLACEMENT_3D('',#3296,#59,#3066);+#3340=ORIENTED_EDGE('',*,*,#3341,.T.);+#3341=EDGE_CURVE('',#3337,#941,#3282,.T.);+#3342=PLANE('',#3343);+#3343=AXIS2_PLACEMENT_3D('',#3344,#59,#13);+#3344=CARTESIAN_POINT('',(4.341787690374,3.38,0.743634917138));+#3345=ADVANCED_FACE('',(#3346),#3360,.F.);+#3346=FACE_BOUND('',#3347,.F.);+#3347=EDGE_LOOP('',(#3348,#3349,#3356,#3359));+#3348=ORIENTED_EDGE('',*,*,#964,.T.);+#3349=ORIENTED_EDGE('',*,*,#3350,.T.);+#3350=EDGE_CURVE('',#959,#3351,#3353,.T.);+#3351=VERTEX_POINT('',#3352);+#3352=CARTESIAN_POINT('',(4.098480775301,2.97,1.292364817767));+#3353=CIRCLE('',#3354,1.E-01);+#3354=AXIS2_PLACEMENT_3D('',#3355,#87,#3017);+#3355=CARTESIAN_POINT('',(4.,2.97,1.275));+#3356=ORIENTED_EDGE('',*,*,#3357,.F.);+#3357=EDGE_CURVE('',#3292,#3351,#3358,.T.);+#3358=LINE('',#3293,#58);+#3359=ORIENTED_EDGE('',*,*,#3291,.F.);+#3360=CYLINDRICAL_SURFACE('',#3295,1.E-01);+#3361=ADVANCED_FACE('',(#3362),#3411,.T.);+#3362=FACE_BOUND('',#3363,.T.);+#3363=EDGE_LOOP('',(#971,#957,#3349,#3364,#3369,#3376,#3381,#3386,#3391,#3397,#3402,#3408));+#3364=ORIENTED_EDGE('',*,*,#3365,.T.);+#3365=EDGE_CURVE('',#3351,#3366,#3368,.T.);+#3366=VERTEX_POINT('',#3367);+#3367=CARTESIAN_POINT('',(4.276476480287,2.97,0.2479055467));+#3368=LINE('',#3352,#3023);+#3369=ORIENTED_EDGE('',*,*,#3370,.T.);+#3370=EDGE_CURVE('',#3366,#3371,#3373,.T.);+#3371=VERTEX_POINT('',#3372);+#3372=CARTESIAN_POINT('',(4.571918806191,2.97,-2.22044604925E-16));+#3373=CIRCLE('',#3374,0.3);+#3374=AXIS2_PLACEMENT_3D('',#3375,#59,#3032);+#3375=CARTESIAN_POINT('',(4.571918806191,2.97,0.3));+#3376=ORIENTED_EDGE('',*,*,#3377,.T.);+#3377=EDGE_CURVE('',#3371,#3378,#3380,.T.);+#3378=VERTEX_POINT('',#3379);+#3379=CARTESIAN_POINT('',(5.15,2.97,-2.22044604925E-16));+#3380=LINE('',#3372,#27);+#3381=ORIENTED_EDGE('',*,*,#3382,.T.);+#3382=EDGE_CURVE('',#3378,#3383,#3385,.T.);+#3383=VERTEX_POINT('',#3384);+#3384=CARTESIAN_POINT('',(5.15,2.97,0.2));+#3385=LINE('',#3379,#466);+#3386=ORIENTED_EDGE('',*,*,#3387,.T.);+#3387=EDGE_CURVE('',#3383,#3388,#3390,.T.);+#3388=VERTEX_POINT('',#3389);+#3389=CARTESIAN_POINT('',(4.571918806191,2.97,0.2));+#3390=LINE('',#3384,#72);+#3391=ORIENTED_EDGE('',*,*,#3392,.T.);+#3392=EDGE_CURVE('',#3388,#3393,#3395,.T.);+#3393=VERTEX_POINT('',#3394);+#3394=CARTESIAN_POINT('',(4.47343803089,2.97,0.282635182233));+#3395=CIRCLE('',#3396,1.E-01);+#3396=AXIS2_PLACEMENT_3D('',#3375,#87,#3054);+#3397=ORIENTED_EDGE('',*,*,#3398,.T.);+#3398=EDGE_CURVE('',#3393,#3399,#3401,.T.);+#3399=VERTEX_POINT('',#3400);+#3400=CARTESIAN_POINT('',(4.295442325904,2.97,1.3270944533));+#3401=LINE('',#3394,#3060);+#3402=ORIENTED_EDGE('',*,*,#3403,.T.);+#3403=EDGE_CURVE('',#3399,#3404,#3406,.T.);+#3404=VERTEX_POINT('',#3405);+#3405=CARTESIAN_POINT('',(4.,2.97,1.575));+#3406=CIRCLE('',#3407,0.3);+#3407=AXIS2_PLACEMENT_3D('',#3355,#59,#3066);+#3408=ORIENTED_EDGE('',*,*,#3409,.T.);+#3409=EDGE_CURVE('',#3404,#973,#3410,.T.);+#3410=LINE('',#3405,#72);+#3411=PLANE('',#3412);+#3412=AXIS2_PLACEMENT_3D('',#3413,#59,#13);+#3413=CARTESIAN_POINT('',(4.341787690374,2.97,0.743634917138));+#3414=ADVANCED_FACE('',(#3415),#436,.F.);+#3415=FACE_BOUND('',#3416,.F.);+#3416=EDGE_LOOP('',(#3417,#3419,#3420,#3424));+#3417=ORIENTED_EDGE('',*,*,#3418,.F.);+#3418=EDGE_CURVE('',#973,#1481,#3410,.T.);+#3419=ORIENTED_EDGE('',*,*,#985,.T.);+#3420=ORIENTED_EDGE('',*,*,#3421,.T.);+#3421=EDGE_CURVE('',#980,#1485,#3422,.T.);+#3422=LINE('',#3423,#72);+#3423=CARTESIAN_POINT('',(4.,2.11,1.575));+#3424=ORIENTED_EDGE('',*,*,#1484,.F.);+#3425=ADVANCED_FACE('',(#3426),#3482,.F.);+#3426=FACE_BOUND('',#3427,.F.);+#3427=EDGE_LOOP('',(#3428,#3429,#3430,#3437,#3442,#3449,#3454,#3459,#3464,#3470,#3475,#3480));+#3428=ORIENTED_EDGE('',*,*,#979,.F.);+#3429=ORIENTED_EDGE('',*,*,#990,.T.);+#3430=ORIENTED_EDGE('',*,*,#3431,.T.);+#3431=EDGE_CURVE('',#991,#3432,#3434,.T.);+#3432=VERTEX_POINT('',#3433);+#3433=CARTESIAN_POINT('',(4.098480775301,2.11,1.292364817767));+#3434=CIRCLE('',#3435,1.E-01);+#3435=AXIS2_PLACEMENT_3D('',#3436,#87,#3017);+#3436=CARTESIAN_POINT('',(4.,2.11,1.275));+#3437=ORIENTED_EDGE('',*,*,#3438,.T.);+#3438=EDGE_CURVE('',#3432,#3439,#3441,.T.);+#3439=VERTEX_POINT('',#3440);+#3440=CARTESIAN_POINT('',(4.276476480287,2.11,0.2479055467));+#3441=LINE('',#3433,#3023);+#3442=ORIENTED_EDGE('',*,*,#3443,.T.);+#3443=EDGE_CURVE('',#3439,#3444,#3446,.T.);+#3444=VERTEX_POINT('',#3445);+#3445=CARTESIAN_POINT('',(4.571918806191,2.11,-2.22044604925E-16));+#3446=CIRCLE('',#3447,0.3);+#3447=AXIS2_PLACEMENT_3D('',#3448,#59,#3032);+#3448=CARTESIAN_POINT('',(4.571918806191,2.11,0.3));+#3449=ORIENTED_EDGE('',*,*,#3450,.T.);+#3450=EDGE_CURVE('',#3444,#3451,#3453,.T.);+#3451=VERTEX_POINT('',#3452);+#3452=CARTESIAN_POINT('',(5.15,2.11,-2.22044604925E-16));+#3453=LINE('',#3445,#27);+#3454=ORIENTED_EDGE('',*,*,#3455,.T.);+#3455=EDGE_CURVE('',#3451,#3456,#3458,.T.);+#3456=VERTEX_POINT('',#3457);+#3457=CARTESIAN_POINT('',(5.15,2.11,0.2));+#3458=LINE('',#3452,#466);+#3459=ORIENTED_EDGE('',*,*,#3460,.T.);+#3460=EDGE_CURVE('',#3456,#3461,#3463,.T.);+#3461=VERTEX_POINT('',#3462);+#3462=CARTESIAN_POINT('',(4.571918806191,2.11,0.2));+#3463=LINE('',#3457,#72);+#3464=ORIENTED_EDGE('',*,*,#3465,.T.);+#3465=EDGE_CURVE('',#3461,#3466,#3468,.T.);+#3466=VERTEX_POINT('',#3467);+#3467=CARTESIAN_POINT('',(4.47343803089,2.11,0.282635182233));+#3468=CIRCLE('',#3469,1.E-01);+#3469=AXIS2_PLACEMENT_3D('',#3448,#87,#3054);+#3470=ORIENTED_EDGE('',*,*,#3471,.T.);+#3471=EDGE_CURVE('',#3466,#3472,#3474,.T.);+#3472=VERTEX_POINT('',#3473);+#3473=CARTESIAN_POINT('',(4.295442325904,2.11,1.3270944533));+#3474=LINE('',#3467,#3060);+#3475=ORIENTED_EDGE('',*,*,#3476,.T.);+#3476=EDGE_CURVE('',#3472,#3477,#3478,.T.);+#3477=VERTEX_POINT('',#3423);+#3478=CIRCLE('',#3479,0.3);+#3479=AXIS2_PLACEMENT_3D('',#3436,#59,#3066);+#3480=ORIENTED_EDGE('',*,*,#3481,.T.);+#3481=EDGE_CURVE('',#3477,#980,#3422,.T.);+#3482=PLANE('',#3483);+#3483=AXIS2_PLACEMENT_3D('',#3484,#59,#13);+#3484=CARTESIAN_POINT('',(4.341787690374,2.11,0.743634917138));+#3485=ADVANCED_FACE('',(#3486),#3500,.F.);+#3486=FACE_BOUND('',#3487,.F.);+#3487=EDGE_LOOP('',(#3488,#3489,#3496,#3499));+#3488=ORIENTED_EDGE('',*,*,#1003,.T.);+#3489=ORIENTED_EDGE('',*,*,#3490,.T.);+#3490=EDGE_CURVE('',#998,#3491,#3493,.T.);+#3491=VERTEX_POINT('',#3492);+#3492=CARTESIAN_POINT('',(4.098480775301,1.7,1.292364817767));+#3493=CIRCLE('',#3494,1.E-01);+#3494=AXIS2_PLACEMENT_3D('',#3495,#87,#3017);+#3495=CARTESIAN_POINT('',(4.,1.7,1.275));+#3496=ORIENTED_EDGE('',*,*,#3497,.F.);+#3497=EDGE_CURVE('',#3432,#3491,#3498,.T.);+#3498=LINE('',#3433,#58);+#3499=ORIENTED_EDGE('',*,*,#3431,.F.);+#3500=CYLINDRICAL_SURFACE('',#3435,1.E-01);+#3501=ADVANCED_FACE('',(#3502),#3551,.T.);+#3502=FACE_BOUND('',#3503,.T.);+#3503=EDGE_LOOP('',(#1010,#996,#3489,#3504,#3509,#3516,#3521,#3526,#3531,#3537,#3542,#3548));+#3504=ORIENTED_EDGE('',*,*,#3505,.T.);+#3505=EDGE_CURVE('',#3491,#3506,#3508,.T.);+#3506=VERTEX_POINT('',#3507);+#3507=CARTESIAN_POINT('',(4.276476480287,1.7,0.2479055467));+#3508=LINE('',#3492,#3023);+#3509=ORIENTED_EDGE('',*,*,#3510,.T.);+#3510=EDGE_CURVE('',#3506,#3511,#3513,.T.);+#3511=VERTEX_POINT('',#3512);+#3512=CARTESIAN_POINT('',(4.571918806191,1.7,-2.22044604925E-16));+#3513=CIRCLE('',#3514,0.3);+#3514=AXIS2_PLACEMENT_3D('',#3515,#59,#3032);+#3515=CARTESIAN_POINT('',(4.571918806191,1.7,0.3));+#3516=ORIENTED_EDGE('',*,*,#3517,.T.);+#3517=EDGE_CURVE('',#3511,#3518,#3520,.T.);+#3518=VERTEX_POINT('',#3519);+#3519=CARTESIAN_POINT('',(5.15,1.7,-2.22044604925E-16));+#3520=LINE('',#3512,#27);+#3521=ORIENTED_EDGE('',*,*,#3522,.T.);+#3522=EDGE_CURVE('',#3518,#3523,#3525,.T.);+#3523=VERTEX_POINT('',#3524);+#3524=CARTESIAN_POINT('',(5.15,1.7,0.2));+#3525=LINE('',#3519,#466);+#3526=ORIENTED_EDGE('',*,*,#3527,.T.);+#3527=EDGE_CURVE('',#3523,#3528,#3530,.T.);+#3528=VERTEX_POINT('',#3529);+#3529=CARTESIAN_POINT('',(4.571918806191,1.7,0.2));+#3530=LINE('',#3524,#72);+#3531=ORIENTED_EDGE('',*,*,#3532,.T.);+#3532=EDGE_CURVE('',#3528,#3533,#3535,.T.);+#3533=VERTEX_POINT('',#3534);+#3534=CARTESIAN_POINT('',(4.47343803089,1.7,0.282635182233));+#3535=CIRCLE('',#3536,1.E-01);+#3536=AXIS2_PLACEMENT_3D('',#3515,#87,#3054);+#3537=ORIENTED_EDGE('',*,*,#3538,.T.);+#3538=EDGE_CURVE('',#3533,#3539,#3541,.T.);+#3539=VERTEX_POINT('',#3540);+#3540=CARTESIAN_POINT('',(4.295442325904,1.7,1.3270944533));+#3541=LINE('',#3534,#3060);+#3542=ORIENTED_EDGE('',*,*,#3543,.T.);+#3543=EDGE_CURVE('',#3539,#3544,#3546,.T.);+#3544=VERTEX_POINT('',#3545);+#3545=CARTESIAN_POINT('',(4.,1.7,1.575));+#3546=CIRCLE('',#3547,0.3);+#3547=AXIS2_PLACEMENT_3D('',#3495,#59,#3066);+#3548=ORIENTED_EDGE('',*,*,#3549,.T.);+#3549=EDGE_CURVE('',#3544,#1012,#3550,.T.);+#3550=LINE('',#3545,#72);+#3551=PLANE('',#3552);+#3552=AXIS2_PLACEMENT_3D('',#3553,#59,#13);+#3553=CARTESIAN_POINT('',(4.341787690374,1.7,0.743634917138));+#3554=ADVANCED_FACE('',(#3555),#436,.F.);+#3555=FACE_BOUND('',#3556,.F.);+#3556=EDGE_LOOP('',(#3557,#3559,#3560,#3564));+#3557=ORIENTED_EDGE('',*,*,#3558,.F.);+#3558=EDGE_CURVE('',#1012,#1489,#3550,.T.);+#3559=ORIENTED_EDGE('',*,*,#1024,.T.);+#3560=ORIENTED_EDGE('',*,*,#3561,.T.);+#3561=EDGE_CURVE('',#1019,#1493,#3562,.T.);+#3562=LINE('',#3563,#72);+#3563=CARTESIAN_POINT('',(4.,0.84,1.575));+#3564=ORIENTED_EDGE('',*,*,#1492,.F.);+#3565=ADVANCED_FACE('',(#3566),#3622,.F.);+#3566=FACE_BOUND('',#3567,.F.);+#3567=EDGE_LOOP('',(#3568,#3569,#3570,#3577,#3582,#3589,#3594,#3599,#3604,#3610,#3615,#3620));+#3568=ORIENTED_EDGE('',*,*,#1018,.F.);+#3569=ORIENTED_EDGE('',*,*,#1029,.T.);+#3570=ORIENTED_EDGE('',*,*,#3571,.T.);+#3571=EDGE_CURVE('',#1030,#3572,#3574,.T.);+#3572=VERTEX_POINT('',#3573);+#3573=CARTESIAN_POINT('',(4.098480775301,0.84,1.292364817767));+#3574=CIRCLE('',#3575,1.E-01);+#3575=AXIS2_PLACEMENT_3D('',#3576,#87,#3017);+#3576=CARTESIAN_POINT('',(4.,0.84,1.275));+#3577=ORIENTED_EDGE('',*,*,#3578,.T.);+#3578=EDGE_CURVE('',#3572,#3579,#3581,.T.);+#3579=VERTEX_POINT('',#3580);+#3580=CARTESIAN_POINT('',(4.276476480287,0.84,0.2479055467));+#3581=LINE('',#3573,#3023);+#3582=ORIENTED_EDGE('',*,*,#3583,.T.);+#3583=EDGE_CURVE('',#3579,#3584,#3586,.T.);+#3584=VERTEX_POINT('',#3585);+#3585=CARTESIAN_POINT('',(4.571918806191,0.84,-2.22044604925E-16));+#3586=CIRCLE('',#3587,0.3);+#3587=AXIS2_PLACEMENT_3D('',#3588,#59,#3032);+#3588=CARTESIAN_POINT('',(4.571918806191,0.84,0.3));+#3589=ORIENTED_EDGE('',*,*,#3590,.T.);+#3590=EDGE_CURVE('',#3584,#3591,#3593,.T.);+#3591=VERTEX_POINT('',#3592);+#3592=CARTESIAN_POINT('',(5.15,0.84,-2.22044604925E-16));+#3593=LINE('',#3585,#27);+#3594=ORIENTED_EDGE('',*,*,#3595,.T.);+#3595=EDGE_CURVE('',#3591,#3596,#3598,.T.);+#3596=VERTEX_POINT('',#3597);+#3597=CARTESIAN_POINT('',(5.15,0.84,0.2));+#3598=LINE('',#3592,#466);+#3599=ORIENTED_EDGE('',*,*,#3600,.T.);+#3600=EDGE_CURVE('',#3596,#3601,#3603,.T.);+#3601=VERTEX_POINT('',#3602);+#3602=CARTESIAN_POINT('',(4.571918806191,0.84,0.2));+#3603=LINE('',#3597,#72);+#3604=ORIENTED_EDGE('',*,*,#3605,.T.);+#3605=EDGE_CURVE('',#3601,#3606,#3608,.T.);+#3606=VERTEX_POINT('',#3607);+#3607=CARTESIAN_POINT('',(4.47343803089,0.84,0.282635182233));+#3608=CIRCLE('',#3609,1.E-01);+#3609=AXIS2_PLACEMENT_3D('',#3588,#87,#3054);+#3610=ORIENTED_EDGE('',*,*,#3611,.T.);+#3611=EDGE_CURVE('',#3606,#3612,#3614,.T.);+#3612=VERTEX_POINT('',#3613);+#3613=CARTESIAN_POINT('',(4.295442325904,0.84,1.3270944533));+#3614=LINE('',#3607,#3060);+#3615=ORIENTED_EDGE('',*,*,#3616,.T.);+#3616=EDGE_CURVE('',#3612,#3617,#3618,.T.);+#3617=VERTEX_POINT('',#3563);+#3618=CIRCLE('',#3619,0.3);+#3619=AXIS2_PLACEMENT_3D('',#3576,#59,#3066);+#3620=ORIENTED_EDGE('',*,*,#3621,.T.);+#3621=EDGE_CURVE('',#3617,#1019,#3562,.T.);+#3622=PLANE('',#3623);+#3623=AXIS2_PLACEMENT_3D('',#3624,#59,#13);+#3624=CARTESIAN_POINT('',(4.341787690374,0.84,0.743634917138));+#3625=ADVANCED_FACE('',(#3626),#3640,.F.);+#3626=FACE_BOUND('',#3627,.F.);+#3627=EDGE_LOOP('',(#3628,#3629,#3636,#3639));+#3628=ORIENTED_EDGE('',*,*,#1042,.T.);+#3629=ORIENTED_EDGE('',*,*,#3630,.T.);+#3630=EDGE_CURVE('',#1037,#3631,#3633,.T.);+#3631=VERTEX_POINT('',#3632);+#3632=CARTESIAN_POINT('',(4.098480775301,0.43,1.292364817767));+#3633=CIRCLE('',#3634,1.E-01);+#3634=AXIS2_PLACEMENT_3D('',#3635,#87,#3017);+#3635=CARTESIAN_POINT('',(4.,0.43,1.275));+#3636=ORIENTED_EDGE('',*,*,#3637,.F.);+#3637=EDGE_CURVE('',#3572,#3631,#3638,.T.);+#3638=LINE('',#3573,#58);+#3639=ORIENTED_EDGE('',*,*,#3571,.F.);+#3640=CYLINDRICAL_SURFACE('',#3575,1.E-01);+#3641=ADVANCED_FACE('',(#3642),#3691,.T.);+#3642=FACE_BOUND('',#3643,.T.);+#3643=EDGE_LOOP('',(#1049,#1035,#3629,#3644,#3649,#3656,#3661,#3666,#3671,#3677,#3682,#3688));+#3644=ORIENTED_EDGE('',*,*,#3645,.T.);+#3645=EDGE_CURVE('',#3631,#3646,#3648,.T.);+#3646=VERTEX_POINT('',#3647);+#3647=CARTESIAN_POINT('',(4.276476480287,0.43,0.2479055467));+#3648=LINE('',#3632,#3023);+#3649=ORIENTED_EDGE('',*,*,#3650,.T.);+#3650=EDGE_CURVE('',#3646,#3651,#3653,.T.);+#3651=VERTEX_POINT('',#3652);+#3652=CARTESIAN_POINT('',(4.571918806191,0.43,-2.22044604925E-16));+#3653=CIRCLE('',#3654,0.3);+#3654=AXIS2_PLACEMENT_3D('',#3655,#59,#3032);+#3655=CARTESIAN_POINT('',(4.571918806191,0.43,0.3));+#3656=ORIENTED_EDGE('',*,*,#3657,.T.);+#3657=EDGE_CURVE('',#3651,#3658,#3660,.T.);+#3658=VERTEX_POINT('',#3659);+#3659=CARTESIAN_POINT('',(5.15,0.43,-2.22044604925E-16));+#3660=LINE('',#3652,#27);+#3661=ORIENTED_EDGE('',*,*,#3662,.T.);+#3662=EDGE_CURVE('',#3658,#3663,#3665,.T.);+#3663=VERTEX_POINT('',#3664);+#3664=CARTESIAN_POINT('',(5.15,0.43,0.2));+#3665=LINE('',#3659,#466);+#3666=ORIENTED_EDGE('',*,*,#3667,.T.);+#3667=EDGE_CURVE('',#3663,#3668,#3670,.T.);+#3668=VERTEX_POINT('',#3669);+#3669=CARTESIAN_POINT('',(4.571918806191,0.43,0.2));+#3670=LINE('',#3664,#72);+#3671=ORIENTED_EDGE('',*,*,#3672,.T.);+#3672=EDGE_CURVE('',#3668,#3673,#3675,.T.);+#3673=VERTEX_POINT('',#3674);+#3674=CARTESIAN_POINT('',(4.47343803089,0.43,0.282635182233));+#3675=CIRCLE('',#3676,1.E-01);+#3676=AXIS2_PLACEMENT_3D('',#3655,#87,#3054);+#3677=ORIENTED_EDGE('',*,*,#3678,.T.);+#3678=EDGE_CURVE('',#3673,#3679,#3681,.T.);+#3679=VERTEX_POINT('',#3680);+#3680=CARTESIAN_POINT('',(4.295442325904,0.43,1.3270944533));+#3681=LINE('',#3674,#3060);+#3682=ORIENTED_EDGE('',*,*,#3683,.T.);+#3683=EDGE_CURVE('',#3679,#3684,#3686,.T.);+#3684=VERTEX_POINT('',#3685);+#3685=CARTESIAN_POINT('',(4.,0.43,1.575));+#3686=CIRCLE('',#3687,0.3);+#3687=AXIS2_PLACEMENT_3D('',#3635,#59,#3066);+#3688=ORIENTED_EDGE('',*,*,#3689,.T.);+#3689=EDGE_CURVE('',#3684,#1051,#3690,.T.);+#3690=LINE('',#3685,#72);+#3691=PLANE('',#3692);+#3692=AXIS2_PLACEMENT_3D('',#3693,#59,#13);+#3693=CARTESIAN_POINT('',(4.341787690374,0.43,0.743634917138));+#3694=ADVANCED_FACE('',(#3695),#436,.F.);+#3695=FACE_BOUND('',#3696,.F.);+#3696=EDGE_LOOP('',(#3697,#3699,#3700,#3704));+#3697=ORIENTED_EDGE('',*,*,#3698,.F.);+#3698=EDGE_CURVE('',#1051,#1497,#3690,.T.);+#3699=ORIENTED_EDGE('',*,*,#1063,.T.);+#3700=ORIENTED_EDGE('',*,*,#3701,.T.);+#3701=EDGE_CURVE('',#1058,#1501,#3702,.T.);+#3702=LINE('',#3703,#72);+#3703=CARTESIAN_POINT('',(4.,-0.43,1.575));+#3704=ORIENTED_EDGE('',*,*,#1500,.F.);+#3705=ADVANCED_FACE('',(#3706),#3762,.F.);+#3706=FACE_BOUND('',#3707,.F.);+#3707=EDGE_LOOP('',(#3708,#3709,#3710,#3717,#3722,#3729,#3734,#3739,#3744,#3750,#3755,#3760));+#3708=ORIENTED_EDGE('',*,*,#1057,.F.);+#3709=ORIENTED_EDGE('',*,*,#1068,.T.);+#3710=ORIENTED_EDGE('',*,*,#3711,.T.);+#3711=EDGE_CURVE('',#1069,#3712,#3714,.T.);+#3712=VERTEX_POINT('',#3713);+#3713=CARTESIAN_POINT('',(4.098480775301,-0.43,1.292364817767));+#3714=CIRCLE('',#3715,1.E-01);+#3715=AXIS2_PLACEMENT_3D('',#3716,#87,#3017);+#3716=CARTESIAN_POINT('',(4.,-0.43,1.275));+#3717=ORIENTED_EDGE('',*,*,#3718,.T.);+#3718=EDGE_CURVE('',#3712,#3719,#3721,.T.);+#3719=VERTEX_POINT('',#3720);+#3720=CARTESIAN_POINT('',(4.276476480287,-0.43,0.2479055467));+#3721=LINE('',#3713,#3023);+#3722=ORIENTED_EDGE('',*,*,#3723,.T.);+#3723=EDGE_CURVE('',#3719,#3724,#3726,.T.);+#3724=VERTEX_POINT('',#3725);+#3725=CARTESIAN_POINT('',(4.571918806191,-0.43,-2.22044604925E-16));+#3726=CIRCLE('',#3727,0.3);+#3727=AXIS2_PLACEMENT_3D('',#3728,#59,#3032);+#3728=CARTESIAN_POINT('',(4.571918806191,-0.43,0.3));+#3729=ORIENTED_EDGE('',*,*,#3730,.T.);+#3730=EDGE_CURVE('',#3724,#3731,#3733,.T.);+#3731=VERTEX_POINT('',#3732);+#3732=CARTESIAN_POINT('',(5.15,-0.43,-2.22044604925E-16));+#3733=LINE('',#3725,#27);+#3734=ORIENTED_EDGE('',*,*,#3735,.T.);+#3735=EDGE_CURVE('',#3731,#3736,#3738,.T.);+#3736=VERTEX_POINT('',#3737);+#3737=CARTESIAN_POINT('',(5.15,-0.43,0.2));+#3738=LINE('',#3732,#466);+#3739=ORIENTED_EDGE('',*,*,#3740,.T.);+#3740=EDGE_CURVE('',#3736,#3741,#3743,.T.);+#3741=VERTEX_POINT('',#3742);+#3742=CARTESIAN_POINT('',(4.571918806191,-0.43,0.2));+#3743=LINE('',#3737,#72);+#3744=ORIENTED_EDGE('',*,*,#3745,.T.);+#3745=EDGE_CURVE('',#3741,#3746,#3748,.T.);+#3746=VERTEX_POINT('',#3747);+#3747=CARTESIAN_POINT('',(4.47343803089,-0.43,0.282635182233));+#3748=CIRCLE('',#3749,1.E-01);+#3749=AXIS2_PLACEMENT_3D('',#3728,#87,#3054);+#3750=ORIENTED_EDGE('',*,*,#3751,.T.);+#3751=EDGE_CURVE('',#3746,#3752,#3754,.T.);+#3752=VERTEX_POINT('',#3753);+#3753=CARTESIAN_POINT('',(4.295442325904,-0.43,1.3270944533));+#3754=LINE('',#3747,#3060);+#3755=ORIENTED_EDGE('',*,*,#3756,.T.);+#3756=EDGE_CURVE('',#3752,#3757,#3758,.T.);+#3757=VERTEX_POINT('',#3703);+#3758=CIRCLE('',#3759,0.3);+#3759=AXIS2_PLACEMENT_3D('',#3716,#59,#3066);+#3760=ORIENTED_EDGE('',*,*,#3761,.T.);+#3761=EDGE_CURVE('',#3757,#1058,#3702,.T.);+#3762=PLANE('',#3763);+#3763=AXIS2_PLACEMENT_3D('',#3764,#59,#13);+#3764=CARTESIAN_POINT('',(4.341787690374,-0.43,0.743634917138));+#3765=ADVANCED_FACE('',(#3766),#3780,.F.);+#3766=FACE_BOUND('',#3767,.F.);+#3767=EDGE_LOOP('',(#3768,#3769,#3776,#3779));+#3768=ORIENTED_EDGE('',*,*,#1081,.T.);+#3769=ORIENTED_EDGE('',*,*,#3770,.T.);+#3770=EDGE_CURVE('',#1076,#3771,#3773,.T.);+#3771=VERTEX_POINT('',#3772);+#3772=CARTESIAN_POINT('',(4.098480775301,-0.84,1.292364817767));+#3773=CIRCLE('',#3774,1.E-01);+#3774=AXIS2_PLACEMENT_3D('',#3775,#87,#3017);+#3775=CARTESIAN_POINT('',(4.,-0.84,1.275));+#3776=ORIENTED_EDGE('',*,*,#3777,.F.);+#3777=EDGE_CURVE('',#3712,#3771,#3778,.T.);+#3778=LINE('',#3713,#58);+#3779=ORIENTED_EDGE('',*,*,#3711,.F.);+#3780=CYLINDRICAL_SURFACE('',#3715,1.E-01);+#3781=ADVANCED_FACE('',(#3782),#3831,.T.);+#3782=FACE_BOUND('',#3783,.T.);+#3783=EDGE_LOOP('',(#1088,#1074,#3769,#3784,#3789,#3796,#3801,#3806,#3811,#3817,#3822,#3828));+#3784=ORIENTED_EDGE('',*,*,#3785,.T.);+#3785=EDGE_CURVE('',#3771,#3786,#3788,.T.);+#3786=VERTEX_POINT('',#3787);+#3787=CARTESIAN_POINT('',(4.276476480287,-0.84,0.2479055467));+#3788=LINE('',#3772,#3023);+#3789=ORIENTED_EDGE('',*,*,#3790,.T.);+#3790=EDGE_CURVE('',#3786,#3791,#3793,.T.);+#3791=VERTEX_POINT('',#3792);+#3792=CARTESIAN_POINT('',(4.571918806191,-0.84,-2.22044604925E-16));+#3793=CIRCLE('',#3794,0.3);+#3794=AXIS2_PLACEMENT_3D('',#3795,#59,#3032);+#3795=CARTESIAN_POINT('',(4.571918806191,-0.84,0.3));+#3796=ORIENTED_EDGE('',*,*,#3797,.T.);+#3797=EDGE_CURVE('',#3791,#3798,#3800,.T.);+#3798=VERTEX_POINT('',#3799);+#3799=CARTESIAN_POINT('',(5.15,-0.84,-2.22044604925E-16));+#3800=LINE('',#3792,#27);+#3801=ORIENTED_EDGE('',*,*,#3802,.T.);+#3802=EDGE_CURVE('',#3798,#3803,#3805,.T.);+#3803=VERTEX_POINT('',#3804);+#3804=CARTESIAN_POINT('',(5.15,-0.84,0.2));+#3805=LINE('',#3799,#466);+#3806=ORIENTED_EDGE('',*,*,#3807,.T.);+#3807=EDGE_CURVE('',#3803,#3808,#3810,.T.);+#3808=VERTEX_POINT('',#3809);+#3809=CARTESIAN_POINT('',(4.571918806191,-0.84,0.2));+#3810=LINE('',#3804,#72);+#3811=ORIENTED_EDGE('',*,*,#3812,.T.);+#3812=EDGE_CURVE('',#3808,#3813,#3815,.T.);+#3813=VERTEX_POINT('',#3814);+#3814=CARTESIAN_POINT('',(4.47343803089,-0.84,0.282635182233));+#3815=CIRCLE('',#3816,1.E-01);+#3816=AXIS2_PLACEMENT_3D('',#3795,#87,#3054);+#3817=ORIENTED_EDGE('',*,*,#3818,.T.);+#3818=EDGE_CURVE('',#3813,#3819,#3821,.T.);+#3819=VERTEX_POINT('',#3820);+#3820=CARTESIAN_POINT('',(4.295442325904,-0.84,1.3270944533));+#3821=LINE('',#3814,#3060);+#3822=ORIENTED_EDGE('',*,*,#3823,.T.);+#3823=EDGE_CURVE('',#3819,#3824,#3826,.T.);+#3824=VERTEX_POINT('',#3825);+#3825=CARTESIAN_POINT('',(4.,-0.84,1.575));+#3826=CIRCLE('',#3827,0.3);+#3827=AXIS2_PLACEMENT_3D('',#3775,#59,#3066);+#3828=ORIENTED_EDGE('',*,*,#3829,.T.);+#3829=EDGE_CURVE('',#3824,#1090,#3830,.T.);+#3830=LINE('',#3825,#72);+#3831=PLANE('',#3832);+#3832=AXIS2_PLACEMENT_3D('',#3833,#59,#13);+#3833=CARTESIAN_POINT('',(4.341787690374,-0.84,0.743634917138));+#3834=ADVANCED_FACE('',(#3835),#436,.F.);+#3835=FACE_BOUND('',#3836,.F.);+#3836=EDGE_LOOP('',(#3837,#3839,#3840,#3844));+#3837=ORIENTED_EDGE('',*,*,#3838,.F.);+#3838=EDGE_CURVE('',#1090,#1505,#3830,.T.);+#3839=ORIENTED_EDGE('',*,*,#1102,.T.);+#3840=ORIENTED_EDGE('',*,*,#3841,.T.);+#3841=EDGE_CURVE('',#1097,#1509,#3842,.T.);+#3842=LINE('',#3843,#72);+#3843=CARTESIAN_POINT('',(4.,-1.7,1.575));+#3844=ORIENTED_EDGE('',*,*,#1508,.F.);+#3845=ADVANCED_FACE('',(#3846),#3902,.F.);+#3846=FACE_BOUND('',#3847,.F.);+#3847=EDGE_LOOP('',(#3848,#3849,#3850,#3857,#3862,#3869,#3874,#3879,#3884,#3890,#3895,#3900));+#3848=ORIENTED_EDGE('',*,*,#1096,.F.);+#3849=ORIENTED_EDGE('',*,*,#1107,.T.);+#3850=ORIENTED_EDGE('',*,*,#3851,.T.);+#3851=EDGE_CURVE('',#1108,#3852,#3854,.T.);+#3852=VERTEX_POINT('',#3853);+#3853=CARTESIAN_POINT('',(4.098480775301,-1.7,1.292364817767));+#3854=CIRCLE('',#3855,1.E-01);+#3855=AXIS2_PLACEMENT_3D('',#3856,#87,#3017);+#3856=CARTESIAN_POINT('',(4.,-1.7,1.275));+#3857=ORIENTED_EDGE('',*,*,#3858,.T.);+#3858=EDGE_CURVE('',#3852,#3859,#3861,.T.);+#3859=VERTEX_POINT('',#3860);+#3860=CARTESIAN_POINT('',(4.276476480287,-1.7,0.2479055467));+#3861=LINE('',#3853,#3023);+#3862=ORIENTED_EDGE('',*,*,#3863,.T.);+#3863=EDGE_CURVE('',#3859,#3864,#3866,.T.);+#3864=VERTEX_POINT('',#3865);+#3865=CARTESIAN_POINT('',(4.571918806191,-1.7,-2.22044604925E-16));+#3866=CIRCLE('',#3867,0.3);+#3867=AXIS2_PLACEMENT_3D('',#3868,#59,#3032);+#3868=CARTESIAN_POINT('',(4.571918806191,-1.7,0.3));+#3869=ORIENTED_EDGE('',*,*,#3870,.T.);+#3870=EDGE_CURVE('',#3864,#3871,#3873,.T.);+#3871=VERTEX_POINT('',#3872);+#3872=CARTESIAN_POINT('',(5.15,-1.7,-2.22044604925E-16));+#3873=LINE('',#3865,#27);+#3874=ORIENTED_EDGE('',*,*,#3875,.T.);+#3875=EDGE_CURVE('',#3871,#3876,#3878,.T.);+#3876=VERTEX_POINT('',#3877);+#3877=CARTESIAN_POINT('',(5.15,-1.7,0.2));+#3878=LINE('',#3872,#466);+#3879=ORIENTED_EDGE('',*,*,#3880,.T.);+#3880=EDGE_CURVE('',#3876,#3881,#3883,.T.);+#3881=VERTEX_POINT('',#3882);+#3882=CARTESIAN_POINT('',(4.571918806191,-1.7,0.2));+#3883=LINE('',#3877,#72);+#3884=ORIENTED_EDGE('',*,*,#3885,.T.);+#3885=EDGE_CURVE('',#3881,#3886,#3888,.T.);+#3886=VERTEX_POINT('',#3887);+#3887=CARTESIAN_POINT('',(4.47343803089,-1.7,0.282635182233));+#3888=CIRCLE('',#3889,1.E-01);+#3889=AXIS2_PLACEMENT_3D('',#3868,#87,#3054);+#3890=ORIENTED_EDGE('',*,*,#3891,.T.);+#3891=EDGE_CURVE('',#3886,#3892,#3894,.T.);+#3892=VERTEX_POINT('',#3893);+#3893=CARTESIAN_POINT('',(4.295442325904,-1.7,1.3270944533));+#3894=LINE('',#3887,#3060);+#3895=ORIENTED_EDGE('',*,*,#3896,.T.);+#3896=EDGE_CURVE('',#3892,#3897,#3898,.T.);+#3897=VERTEX_POINT('',#3843);+#3898=CIRCLE('',#3899,0.3);+#3899=AXIS2_PLACEMENT_3D('',#3856,#59,#3066);+#3900=ORIENTED_EDGE('',*,*,#3901,.T.);+#3901=EDGE_CURVE('',#3897,#1097,#3842,.T.);+#3902=PLANE('',#3903);+#3903=AXIS2_PLACEMENT_3D('',#3904,#59,#13);+#3904=CARTESIAN_POINT('',(4.341787690374,-1.7,0.743634917138));+#3905=ADVANCED_FACE('',(#3906),#3920,.F.);+#3906=FACE_BOUND('',#3907,.F.);+#3907=EDGE_LOOP('',(#3908,#3909,#3916,#3919));+#3908=ORIENTED_EDGE('',*,*,#1120,.T.);+#3909=ORIENTED_EDGE('',*,*,#3910,.T.);+#3910=EDGE_CURVE('',#1115,#3911,#3913,.T.);+#3911=VERTEX_POINT('',#3912);+#3912=CARTESIAN_POINT('',(4.098480775301,-2.11,1.292364817767));+#3913=CIRCLE('',#3914,1.E-01);+#3914=AXIS2_PLACEMENT_3D('',#3915,#87,#3017);+#3915=CARTESIAN_POINT('',(4.,-2.11,1.275));+#3916=ORIENTED_EDGE('',*,*,#3917,.F.);+#3917=EDGE_CURVE('',#3852,#3911,#3918,.T.);+#3918=LINE('',#3853,#58);+#3919=ORIENTED_EDGE('',*,*,#3851,.F.);+#3920=CYLINDRICAL_SURFACE('',#3855,1.E-01);+#3921=ADVANCED_FACE('',(#3922),#3971,.T.);+#3922=FACE_BOUND('',#3923,.T.);+#3923=EDGE_LOOP('',(#1127,#1113,#3909,#3924,#3929,#3936,#3941,#3946,#3951,#3957,#3962,#3968));+#3924=ORIENTED_EDGE('',*,*,#3925,.T.);+#3925=EDGE_CURVE('',#3911,#3926,#3928,.T.);+#3926=VERTEX_POINT('',#3927);+#3927=CARTESIAN_POINT('',(4.276476480287,-2.11,0.2479055467));+#3928=LINE('',#3912,#3023);+#3929=ORIENTED_EDGE('',*,*,#3930,.T.);+#3930=EDGE_CURVE('',#3926,#3931,#3933,.T.);+#3931=VERTEX_POINT('',#3932);+#3932=CARTESIAN_POINT('',(4.571918806191,-2.11,-2.22044604925E-16));+#3933=CIRCLE('',#3934,0.3);+#3934=AXIS2_PLACEMENT_3D('',#3935,#59,#3032);+#3935=CARTESIAN_POINT('',(4.571918806191,-2.11,0.3));+#3936=ORIENTED_EDGE('',*,*,#3937,.T.);+#3937=EDGE_CURVE('',#3931,#3938,#3940,.T.);+#3938=VERTEX_POINT('',#3939);+#3939=CARTESIAN_POINT('',(5.15,-2.11,-2.22044604925E-16));+#3940=LINE('',#3932,#27);+#3941=ORIENTED_EDGE('',*,*,#3942,.T.);+#3942=EDGE_CURVE('',#3938,#3943,#3945,.T.);+#3943=VERTEX_POINT('',#3944);+#3944=CARTESIAN_POINT('',(5.15,-2.11,0.2));+#3945=LINE('',#3939,#466);+#3946=ORIENTED_EDGE('',*,*,#3947,.T.);+#3947=EDGE_CURVE('',#3943,#3948,#3950,.T.);+#3948=VERTEX_POINT('',#3949);+#3949=CARTESIAN_POINT('',(4.571918806191,-2.11,0.2));+#3950=LINE('',#3944,#72);+#3951=ORIENTED_EDGE('',*,*,#3952,.T.);+#3952=EDGE_CURVE('',#3948,#3953,#3955,.T.);+#3953=VERTEX_POINT('',#3954);+#3954=CARTESIAN_POINT('',(4.47343803089,-2.11,0.282635182233));+#3955=CIRCLE('',#3956,1.E-01);+#3956=AXIS2_PLACEMENT_3D('',#3935,#87,#3054);+#3957=ORIENTED_EDGE('',*,*,#3958,.T.);+#3958=EDGE_CURVE('',#3953,#3959,#3961,.T.);+#3959=VERTEX_POINT('',#3960);+#3960=CARTESIAN_POINT('',(4.295442325904,-2.11,1.3270944533));+#3961=LINE('',#3954,#3060);+#3962=ORIENTED_EDGE('',*,*,#3963,.T.);+#3963=EDGE_CURVE('',#3959,#3964,#3966,.T.);+#3964=VERTEX_POINT('',#3965);+#3965=CARTESIAN_POINT('',(4.,-2.11,1.575));+#3966=CIRCLE('',#3967,0.3);+#3967=AXIS2_PLACEMENT_3D('',#3915,#59,#3066);+#3968=ORIENTED_EDGE('',*,*,#3969,.T.);+#3969=EDGE_CURVE('',#3964,#1129,#3970,.T.);+#3970=LINE('',#3965,#72);+#3971=PLANE('',#3972);+#3972=AXIS2_PLACEMENT_3D('',#3973,#59,#13);+#3973=CARTESIAN_POINT('',(4.341787690374,-2.11,0.743634917138));+#3974=ADVANCED_FACE('',(#3975),#436,.F.);+#3975=FACE_BOUND('',#3976,.F.);+#3976=EDGE_LOOP('',(#3977,#3979,#3980,#3984));+#3977=ORIENTED_EDGE('',*,*,#3978,.F.);+#3978=EDGE_CURVE('',#1129,#1513,#3970,.T.);+#3979=ORIENTED_EDGE('',*,*,#1141,.T.);+#3980=ORIENTED_EDGE('',*,*,#3981,.T.);+#3981=EDGE_CURVE('',#1136,#1517,#3982,.T.);+#3982=LINE('',#3983,#72);+#3983=CARTESIAN_POINT('',(4.,-2.97,1.575));+#3984=ORIENTED_EDGE('',*,*,#1516,.F.);+#3985=ADVANCED_FACE('',(#3986),#4042,.F.);+#3986=FACE_BOUND('',#3987,.F.);+#3987=EDGE_LOOP('',(#3988,#3989,#3990,#3997,#4002,#4009,#4014,#4019,#4024,#4030,#4035,#4040));+#3988=ORIENTED_EDGE('',*,*,#1135,.F.);+#3989=ORIENTED_EDGE('',*,*,#1146,.T.);+#3990=ORIENTED_EDGE('',*,*,#3991,.T.);+#3991=EDGE_CURVE('',#1147,#3992,#3994,.T.);+#3992=VERTEX_POINT('',#3993);+#3993=CARTESIAN_POINT('',(4.098480775301,-2.97,1.292364817767));+#3994=CIRCLE('',#3995,1.E-01);+#3995=AXIS2_PLACEMENT_3D('',#3996,#87,#3017);+#3996=CARTESIAN_POINT('',(4.,-2.97,1.275));+#3997=ORIENTED_EDGE('',*,*,#3998,.T.);+#3998=EDGE_CURVE('',#3992,#3999,#4001,.T.);+#3999=VERTEX_POINT('',#4000);+#4000=CARTESIAN_POINT('',(4.276476480287,-2.97,0.2479055467));+#4001=LINE('',#3993,#3023);+#4002=ORIENTED_EDGE('',*,*,#4003,.T.);+#4003=EDGE_CURVE('',#3999,#4004,#4006,.T.);+#4004=VERTEX_POINT('',#4005);+#4005=CARTESIAN_POINT('',(4.571918806191,-2.97,-2.22044604925E-16));+#4006=CIRCLE('',#4007,0.3);+#4007=AXIS2_PLACEMENT_3D('',#4008,#59,#3032);+#4008=CARTESIAN_POINT('',(4.571918806191,-2.97,0.3));+#4009=ORIENTED_EDGE('',*,*,#4010,.T.);+#4010=EDGE_CURVE('',#4004,#4011,#4013,.T.);+#4011=VERTEX_POINT('',#4012);+#4012=CARTESIAN_POINT('',(5.15,-2.97,-2.22044604925E-16));+#4013=LINE('',#4005,#27);+#4014=ORIENTED_EDGE('',*,*,#4015,.T.);+#4015=EDGE_CURVE('',#4011,#4016,#4018,.T.);+#4016=VERTEX_POINT('',#4017);+#4017=CARTESIAN_POINT('',(5.15,-2.97,0.2));+#4018=LINE('',#4012,#466);+#4019=ORIENTED_EDGE('',*,*,#4020,.T.);+#4020=EDGE_CURVE('',#4016,#4021,#4023,.T.);+#4021=VERTEX_POINT('',#4022);+#4022=CARTESIAN_POINT('',(4.571918806191,-2.97,0.2));+#4023=LINE('',#4017,#72);+#4024=ORIENTED_EDGE('',*,*,#4025,.T.);+#4025=EDGE_CURVE('',#4021,#4026,#4028,.T.);+#4026=VERTEX_POINT('',#4027);+#4027=CARTESIAN_POINT('',(4.47343803089,-2.97,0.282635182233));+#4028=CIRCLE('',#4029,1.E-01);+#4029=AXIS2_PLACEMENT_3D('',#4008,#87,#3054);+#4030=ORIENTED_EDGE('',*,*,#4031,.T.);+#4031=EDGE_CURVE('',#4026,#4032,#4034,.T.);+#4032=VERTEX_POINT('',#4033);+#4033=CARTESIAN_POINT('',(4.295442325904,-2.97,1.3270944533));+#4034=LINE('',#4027,#3060);+#4035=ORIENTED_EDGE('',*,*,#4036,.T.);+#4036=EDGE_CURVE('',#4032,#4037,#4038,.T.);+#4037=VERTEX_POINT('',#3983);+#4038=CIRCLE('',#4039,0.3);+#4039=AXIS2_PLACEMENT_3D('',#3996,#59,#3066);+#4040=ORIENTED_EDGE('',*,*,#4041,.T.);+#4041=EDGE_CURVE('',#4037,#1136,#3982,.T.);+#4042=PLANE('',#4043);+#4043=AXIS2_PLACEMENT_3D('',#4044,#59,#13);+#4044=CARTESIAN_POINT('',(4.341787690374,-2.97,0.743634917138));+#4045=ADVANCED_FACE('',(#4046),#4060,.F.);+#4046=FACE_BOUND('',#4047,.F.);+#4047=EDGE_LOOP('',(#4048,#4049,#4056,#4059));+#4048=ORIENTED_EDGE('',*,*,#1159,.T.);+#4049=ORIENTED_EDGE('',*,*,#4050,.T.);+#4050=EDGE_CURVE('',#1154,#4051,#4053,.T.);+#4051=VERTEX_POINT('',#4052);+#4052=CARTESIAN_POINT('',(4.098480775301,-3.38,1.292364817767));+#4053=CIRCLE('',#4054,1.E-01);+#4054=AXIS2_PLACEMENT_3D('',#4055,#87,#3017);+#4055=CARTESIAN_POINT('',(4.,-3.38,1.275));+#4056=ORIENTED_EDGE('',*,*,#4057,.F.);+#4057=EDGE_CURVE('',#3992,#4051,#4058,.T.);+#4058=LINE('',#3993,#58);+#4059=ORIENTED_EDGE('',*,*,#3991,.F.);+#4060=CYLINDRICAL_SURFACE('',#3995,1.E-01);+#4061=ADVANCED_FACE('',(#4062),#4111,.T.);+#4062=FACE_BOUND('',#4063,.T.);+#4063=EDGE_LOOP('',(#1166,#1152,#4049,#4064,#4069,#4076,#4081,#4086,#4091,#4097,#4102,#4108));+#4064=ORIENTED_EDGE('',*,*,#4065,.T.);+#4065=EDGE_CURVE('',#4051,#4066,#4068,.T.);+#4066=VERTEX_POINT('',#4067);+#4067=CARTESIAN_POINT('',(4.276476480287,-3.38,0.2479055467));+#4068=LINE('',#4052,#3023);+#4069=ORIENTED_EDGE('',*,*,#4070,.T.);+#4070=EDGE_CURVE('',#4066,#4071,#4073,.T.);+#4071=VERTEX_POINT('',#4072);+#4072=CARTESIAN_POINT('',(4.571918806191,-3.38,-2.22044604925E-16));+#4073=CIRCLE('',#4074,0.3);+#4074=AXIS2_PLACEMENT_3D('',#4075,#59,#3032);+#4075=CARTESIAN_POINT('',(4.571918806191,-3.38,0.3));+#4076=ORIENTED_EDGE('',*,*,#4077,.T.);+#4077=EDGE_CURVE('',#4071,#4078,#4080,.T.);+#4078=VERTEX_POINT('',#4079);+#4079=CARTESIAN_POINT('',(5.15,-3.38,-2.22044604925E-16));+#4080=LINE('',#4072,#27);+#4081=ORIENTED_EDGE('',*,*,#4082,.T.);+#4082=EDGE_CURVE('',#4078,#4083,#4085,.T.);+#4083=VERTEX_POINT('',#4084);+#4084=CARTESIAN_POINT('',(5.15,-3.38,0.2));+#4085=LINE('',#4079,#466);+#4086=ORIENTED_EDGE('',*,*,#4087,.T.);+#4087=EDGE_CURVE('',#4083,#4088,#4090,.T.);+#4088=VERTEX_POINT('',#4089);+#4089=CARTESIAN_POINT('',(4.571918806191,-3.38,0.2));+#4090=LINE('',#4084,#72);+#4091=ORIENTED_EDGE('',*,*,#4092,.T.);+#4092=EDGE_CURVE('',#4088,#4093,#4095,.T.);+#4093=VERTEX_POINT('',#4094);+#4094=CARTESIAN_POINT('',(4.47343803089,-3.38,0.282635182233));+#4095=CIRCLE('',#4096,1.E-01);+#4096=AXIS2_PLACEMENT_3D('',#4075,#87,#3054);+#4097=ORIENTED_EDGE('',*,*,#4098,.T.);+#4098=EDGE_CURVE('',#4093,#4099,#4101,.T.);+#4099=VERTEX_POINT('',#4100);+#4100=CARTESIAN_POINT('',(4.295442325904,-3.38,1.3270944533));+#4101=LINE('',#4094,#3060);+#4102=ORIENTED_EDGE('',*,*,#4103,.T.);+#4103=EDGE_CURVE('',#4099,#4104,#4106,.T.);+#4104=VERTEX_POINT('',#4105);+#4105=CARTESIAN_POINT('',(4.,-3.38,1.575));+#4106=CIRCLE('',#4107,0.3);+#4107=AXIS2_PLACEMENT_3D('',#4055,#59,#3066);+#4108=ORIENTED_EDGE('',*,*,#4109,.T.);+#4109=EDGE_CURVE('',#4104,#1168,#4110,.T.);+#4110=LINE('',#4105,#72);+#4111=PLANE('',#4112);+#4112=AXIS2_PLACEMENT_3D('',#4113,#59,#13);+#4113=CARTESIAN_POINT('',(4.341787690374,-3.38,0.743634917138));+#4114=ADVANCED_FACE('',(#4115),#436,.F.);+#4115=FACE_BOUND('',#4116,.F.);+#4116=EDGE_LOOP('',(#4117,#4119,#4120,#4124));+#4117=ORIENTED_EDGE('',*,*,#4118,.F.);+#4118=EDGE_CURVE('',#1168,#1521,#4110,.T.);+#4119=ORIENTED_EDGE('',*,*,#1180,.T.);+#4120=ORIENTED_EDGE('',*,*,#4121,.T.);+#4121=EDGE_CURVE('',#1175,#1525,#4122,.T.);+#4122=LINE('',#4123,#72);+#4123=CARTESIAN_POINT('',(4.,-4.24,1.575));+#4124=ORIENTED_EDGE('',*,*,#1524,.F.);+#4125=ADVANCED_FACE('',(#4126),#4182,.F.);+#4126=FACE_BOUND('',#4127,.F.);+#4127=EDGE_LOOP('',(#4128,#4129,#4130,#4137,#4142,#4149,#4154,#4159,#4164,#4170,#4175,#4180));+#4128=ORIENTED_EDGE('',*,*,#1174,.F.);+#4129=ORIENTED_EDGE('',*,*,#1185,.T.);+#4130=ORIENTED_EDGE('',*,*,#4131,.T.);+#4131=EDGE_CURVE('',#1186,#4132,#4134,.T.);+#4132=VERTEX_POINT('',#4133);+#4133=CARTESIAN_POINT('',(4.098480775301,-4.24,1.292364817767));+#4134=CIRCLE('',#4135,1.E-01);+#4135=AXIS2_PLACEMENT_3D('',#4136,#87,#3017);+#4136=CARTESIAN_POINT('',(4.,-4.24,1.275));+#4137=ORIENTED_EDGE('',*,*,#4138,.T.);+#4138=EDGE_CURVE('',#4132,#4139,#4141,.T.);+#4139=VERTEX_POINT('',#4140);+#4140=CARTESIAN_POINT('',(4.276476480287,-4.24,0.2479055467));+#4141=LINE('',#4133,#3023);+#4142=ORIENTED_EDGE('',*,*,#4143,.T.);+#4143=EDGE_CURVE('',#4139,#4144,#4146,.T.);+#4144=VERTEX_POINT('',#4145);+#4145=CARTESIAN_POINT('',(4.571918806191,-4.24,-2.22044604925E-16));+#4146=CIRCLE('',#4147,0.3);+#4147=AXIS2_PLACEMENT_3D('',#4148,#59,#3032);+#4148=CARTESIAN_POINT('',(4.571918806191,-4.24,0.3));+#4149=ORIENTED_EDGE('',*,*,#4150,.T.);+#4150=EDGE_CURVE('',#4144,#4151,#4153,.T.);+#4151=VERTEX_POINT('',#4152);+#4152=CARTESIAN_POINT('',(5.15,-4.24,-2.22044604925E-16));+#4153=LINE('',#4145,#27);+#4154=ORIENTED_EDGE('',*,*,#4155,.T.);+#4155=EDGE_CURVE('',#4151,#4156,#4158,.T.);+#4156=VERTEX_POINT('',#4157);+#4157=CARTESIAN_POINT('',(5.15,-4.24,0.2));+#4158=LINE('',#4152,#466);+#4159=ORIENTED_EDGE('',*,*,#4160,.T.);+#4160=EDGE_CURVE('',#4156,#4161,#4163,.T.);+#4161=VERTEX_POINT('',#4162);+#4162=CARTESIAN_POINT('',(4.571918806191,-4.24,0.2));+#4163=LINE('',#4157,#72);+#4164=ORIENTED_EDGE('',*,*,#4165,.T.);+#4165=EDGE_CURVE('',#4161,#4166,#4168,.T.);+#4166=VERTEX_POINT('',#4167);+#4167=CARTESIAN_POINT('',(4.47343803089,-4.24,0.282635182233));+#4168=CIRCLE('',#4169,1.E-01);+#4169=AXIS2_PLACEMENT_3D('',#4148,#87,#3054);+#4170=ORIENTED_EDGE('',*,*,#4171,.T.);+#4171=EDGE_CURVE('',#4166,#4172,#4174,.T.);+#4172=VERTEX_POINT('',#4173);+#4173=CARTESIAN_POINT('',(4.295442325904,-4.24,1.3270944533));+#4174=LINE('',#4167,#3060);+#4175=ORIENTED_EDGE('',*,*,#4176,.T.);+#4176=EDGE_CURVE('',#4172,#4177,#4178,.T.);+#4177=VERTEX_POINT('',#4123);+#4178=CIRCLE('',#4179,0.3);+#4179=AXIS2_PLACEMENT_3D('',#4136,#59,#3066);+#4180=ORIENTED_EDGE('',*,*,#4181,.T.);+#4181=EDGE_CURVE('',#4177,#1175,#4122,.T.);+#4182=PLANE('',#4183);+#4183=AXIS2_PLACEMENT_3D('',#4184,#59,#13);+#4184=CARTESIAN_POINT('',(4.341787690374,-4.24,0.743634917138));+#4185=ADVANCED_FACE('',(#4186),#4200,.F.);+#4186=FACE_BOUND('',#4187,.F.);+#4187=EDGE_LOOP('',(#4188,#4189,#4196,#4199));+#4188=ORIENTED_EDGE('',*,*,#1198,.T.);+#4189=ORIENTED_EDGE('',*,*,#4190,.T.);+#4190=EDGE_CURVE('',#1193,#4191,#4193,.T.);+#4191=VERTEX_POINT('',#4192);+#4192=CARTESIAN_POINT('',(4.098480775301,-4.65,1.292364817767));+#4193=CIRCLE('',#4194,1.E-01);+#4194=AXIS2_PLACEMENT_3D('',#4195,#87,#3017);+#4195=CARTESIAN_POINT('',(4.,-4.65,1.275));+#4196=ORIENTED_EDGE('',*,*,#4197,.F.);+#4197=EDGE_CURVE('',#4132,#4191,#4198,.T.);+#4198=LINE('',#4133,#58);+#4199=ORIENTED_EDGE('',*,*,#4131,.F.);+#4200=CYLINDRICAL_SURFACE('',#4135,1.E-01);+#4201=ADVANCED_FACE('',(#4202),#4251,.T.);+#4202=FACE_BOUND('',#4203,.T.);+#4203=EDGE_LOOP('',(#1205,#1191,#4189,#4204,#4209,#4216,#4221,#4226,#4231,#4237,#4242,#4248));+#4204=ORIENTED_EDGE('',*,*,#4205,.T.);+#4205=EDGE_CURVE('',#4191,#4206,#4208,.T.);+#4206=VERTEX_POINT('',#4207);+#4207=CARTESIAN_POINT('',(4.276476480287,-4.65,0.2479055467));+#4208=LINE('',#4192,#3023);+#4209=ORIENTED_EDGE('',*,*,#4210,.T.);+#4210=EDGE_CURVE('',#4206,#4211,#4213,.T.);+#4211=VERTEX_POINT('',#4212);+#4212=CARTESIAN_POINT('',(4.571918806191,-4.65,-2.22044604925E-16));+#4213=CIRCLE('',#4214,0.3);+#4214=AXIS2_PLACEMENT_3D('',#4215,#59,#3032);+#4215=CARTESIAN_POINT('',(4.571918806191,-4.65,0.3));+#4216=ORIENTED_EDGE('',*,*,#4217,.T.);+#4217=EDGE_CURVE('',#4211,#4218,#4220,.T.);+#4218=VERTEX_POINT('',#4219);+#4219=CARTESIAN_POINT('',(5.15,-4.65,-2.22044604925E-16));+#4220=LINE('',#4212,#27);+#4221=ORIENTED_EDGE('',*,*,#4222,.T.);+#4222=EDGE_CURVE('',#4218,#4223,#4225,.T.);+#4223=VERTEX_POINT('',#4224);+#4224=CARTESIAN_POINT('',(5.15,-4.65,0.2));+#4225=LINE('',#4219,#466);+#4226=ORIENTED_EDGE('',*,*,#4227,.T.);+#4227=EDGE_CURVE('',#4223,#4228,#4230,.T.);+#4228=VERTEX_POINT('',#4229);+#4229=CARTESIAN_POINT('',(4.571918806191,-4.65,0.2));+#4230=LINE('',#4224,#72);+#4231=ORIENTED_EDGE('',*,*,#4232,.T.);+#4232=EDGE_CURVE('',#4228,#4233,#4235,.T.);+#4233=VERTEX_POINT('',#4234);+#4234=CARTESIAN_POINT('',(4.47343803089,-4.65,0.282635182233));+#4235=CIRCLE('',#4236,1.E-01);+#4236=AXIS2_PLACEMENT_3D('',#4215,#87,#3054);+#4237=ORIENTED_EDGE('',*,*,#4238,.T.);+#4238=EDGE_CURVE('',#4233,#4239,#4241,.T.);+#4239=VERTEX_POINT('',#4240);+#4240=CARTESIAN_POINT('',(4.295442325904,-4.65,1.3270944533));+#4241=LINE('',#4234,#3060);+#4242=ORIENTED_EDGE('',*,*,#4243,.T.);+#4243=EDGE_CURVE('',#4239,#4244,#4246,.T.);+#4244=VERTEX_POINT('',#4245);+#4245=CARTESIAN_POINT('',(4.,-4.65,1.575));+#4246=CIRCLE('',#4247,0.3);+#4247=AXIS2_PLACEMENT_3D('',#4195,#59,#3066);+#4248=ORIENTED_EDGE('',*,*,#4249,.T.);+#4249=EDGE_CURVE('',#4244,#1207,#4250,.T.);+#4250=LINE('',#4245,#72);+#4251=PLANE('',#4252);+#4252=AXIS2_PLACEMENT_3D('',#4253,#59,#13);+#4253=CARTESIAN_POINT('',(4.341787690374,-4.65,0.743634917138));+#4254=ADVANCED_FACE('',(#4255),#436,.F.);+#4255=FACE_BOUND('',#4256,.F.);+#4256=EDGE_LOOP('',(#4257,#4259,#4260,#4264));+#4257=ORIENTED_EDGE('',*,*,#4258,.F.);+#4258=EDGE_CURVE('',#1207,#1529,#4250,.T.);+#4259=ORIENTED_EDGE('',*,*,#1219,.T.);+#4260=ORIENTED_EDGE('',*,*,#4261,.T.);+#4261=EDGE_CURVE('',#1214,#1533,#4262,.T.);+#4262=LINE('',#4263,#72);+#4263=CARTESIAN_POINT('',(4.,-5.51,1.575));+#4264=ORIENTED_EDGE('',*,*,#1532,.F.);+#4265=ADVANCED_FACE('',(#4266),#4322,.F.);+#4266=FACE_BOUND('',#4267,.F.);+#4267=EDGE_LOOP('',(#4268,#4269,#4270,#4277,#4282,#4289,#4294,#4299,#4304,#4310,#4315,#4320));+#4268=ORIENTED_EDGE('',*,*,#1213,.F.);+#4269=ORIENTED_EDGE('',*,*,#1224,.T.);+#4270=ORIENTED_EDGE('',*,*,#4271,.T.);+#4271=EDGE_CURVE('',#1225,#4272,#4274,.T.);+#4272=VERTEX_POINT('',#4273);+#4273=CARTESIAN_POINT('',(4.098480775301,-5.51,1.292364817767));+#4274=CIRCLE('',#4275,1.E-01);+#4275=AXIS2_PLACEMENT_3D('',#4276,#87,#3017);+#4276=CARTESIAN_POINT('',(4.,-5.51,1.275));+#4277=ORIENTED_EDGE('',*,*,#4278,.T.);+#4278=EDGE_CURVE('',#4272,#4279,#4281,.T.);+#4279=VERTEX_POINT('',#4280);+#4280=CARTESIAN_POINT('',(4.276476480287,-5.51,0.2479055467));+#4281=LINE('',#4273,#3023);+#4282=ORIENTED_EDGE('',*,*,#4283,.T.);+#4283=EDGE_CURVE('',#4279,#4284,#4286,.T.);+#4284=VERTEX_POINT('',#4285);+#4285=CARTESIAN_POINT('',(4.571918806191,-5.51,-2.22044604925E-16));+#4286=CIRCLE('',#4287,0.3);+#4287=AXIS2_PLACEMENT_3D('',#4288,#59,#3032);+#4288=CARTESIAN_POINT('',(4.571918806191,-5.51,0.3));+#4289=ORIENTED_EDGE('',*,*,#4290,.T.);+#4290=EDGE_CURVE('',#4284,#4291,#4293,.T.);+#4291=VERTEX_POINT('',#4292);+#4292=CARTESIAN_POINT('',(5.15,-5.51,-2.22044604925E-16));+#4293=LINE('',#4285,#27);+#4294=ORIENTED_EDGE('',*,*,#4295,.T.);+#4295=EDGE_CURVE('',#4291,#4296,#4298,.T.);+#4296=VERTEX_POINT('',#4297);+#4297=CARTESIAN_POINT('',(5.15,-5.51,0.2));+#4298=LINE('',#4292,#466);+#4299=ORIENTED_EDGE('',*,*,#4300,.T.);+#4300=EDGE_CURVE('',#4296,#4301,#4303,.T.);+#4301=VERTEX_POINT('',#4302);+#4302=CARTESIAN_POINT('',(4.571918806191,-5.51,0.2));+#4303=LINE('',#4297,#72);+#4304=ORIENTED_EDGE('',*,*,#4305,.T.);+#4305=EDGE_CURVE('',#4301,#4306,#4308,.T.);+#4306=VERTEX_POINT('',#4307);+#4307=CARTESIAN_POINT('',(4.47343803089,-5.51,0.282635182233));+#4308=CIRCLE('',#4309,1.E-01);+#4309=AXIS2_PLACEMENT_3D('',#4288,#87,#3054);+#4310=ORIENTED_EDGE('',*,*,#4311,.T.);+#4311=EDGE_CURVE('',#4306,#4312,#4314,.T.);+#4312=VERTEX_POINT('',#4313);+#4313=CARTESIAN_POINT('',(4.295442325904,-5.51,1.3270944533));+#4314=LINE('',#4307,#3060);+#4315=ORIENTED_EDGE('',*,*,#4316,.T.);+#4316=EDGE_CURVE('',#4312,#4317,#4318,.T.);+#4317=VERTEX_POINT('',#4263);+#4318=CIRCLE('',#4319,0.3);+#4319=AXIS2_PLACEMENT_3D('',#4276,#59,#3066);+#4320=ORIENTED_EDGE('',*,*,#4321,.T.);+#4321=EDGE_CURVE('',#4317,#1214,#4262,.T.);+#4322=PLANE('',#4323);+#4323=AXIS2_PLACEMENT_3D('',#4324,#59,#13);+#4324=CARTESIAN_POINT('',(4.341787690374,-5.51,0.743634917138));+#4325=ADVANCED_FACE('',(#4326),#4340,.F.);+#4326=FACE_BOUND('',#4327,.F.);+#4327=EDGE_LOOP('',(#4328,#4329,#4336,#4339));+#4328=ORIENTED_EDGE('',*,*,#1237,.T.);+#4329=ORIENTED_EDGE('',*,*,#4330,.T.);+#4330=EDGE_CURVE('',#1232,#4331,#4333,.T.);+#4331=VERTEX_POINT('',#4332);+#4332=CARTESIAN_POINT('',(4.098480775301,-5.92,1.292364817767));+#4333=CIRCLE('',#4334,1.E-01);+#4334=AXIS2_PLACEMENT_3D('',#4335,#87,#3017);+#4335=CARTESIAN_POINT('',(4.,-5.92,1.275));+#4336=ORIENTED_EDGE('',*,*,#4337,.F.);+#4337=EDGE_CURVE('',#4272,#4331,#4338,.T.);+#4338=LINE('',#4273,#58);+#4339=ORIENTED_EDGE('',*,*,#4271,.F.);+#4340=CYLINDRICAL_SURFACE('',#4275,1.E-01);+#4341=ADVANCED_FACE('',(#4342),#4389,.T.);+#4342=FACE_BOUND('',#4343,.T.);+#4343=EDGE_LOOP('',(#1244,#1230,#4329,#4344,#4349,#4356,#4361,#4366,#4371,#4377,#4382,#4387));+#4344=ORIENTED_EDGE('',*,*,#4345,.T.);+#4345=EDGE_CURVE('',#4331,#4346,#4348,.T.);+#4346=VERTEX_POINT('',#4347);+#4347=CARTESIAN_POINT('',(4.276476480287,-5.92,0.2479055467));+#4348=LINE('',#4332,#3023);+#4349=ORIENTED_EDGE('',*,*,#4350,.T.);+#4350=EDGE_CURVE('',#4346,#4351,#4353,.T.);+#4351=VERTEX_POINT('',#4352);+#4352=CARTESIAN_POINT('',(4.571918806191,-5.92,-2.22044604925E-16));+#4353=CIRCLE('',#4354,0.3);+#4354=AXIS2_PLACEMENT_3D('',#4355,#59,#3032);+#4355=CARTESIAN_POINT('',(4.571918806191,-5.92,0.3));+#4356=ORIENTED_EDGE('',*,*,#4357,.T.);+#4357=EDGE_CURVE('',#4351,#4358,#4360,.T.);+#4358=VERTEX_POINT('',#4359);+#4359=CARTESIAN_POINT('',(5.15,-5.92,-2.22044604925E-16));+#4360=LINE('',#4352,#27);+#4361=ORIENTED_EDGE('',*,*,#4362,.T.);+#4362=EDGE_CURVE('',#4358,#4363,#4365,.T.);+#4363=VERTEX_POINT('',#4364);+#4364=CARTESIAN_POINT('',(5.15,-5.92,0.2));+#4365=LINE('',#4359,#466);+#4366=ORIENTED_EDGE('',*,*,#4367,.T.);+#4367=EDGE_CURVE('',#4363,#4368,#4370,.T.);+#4368=VERTEX_POINT('',#4369);+#4369=CARTESIAN_POINT('',(4.571918806191,-5.92,0.2));+#4370=LINE('',#4364,#72);+#4371=ORIENTED_EDGE('',*,*,#4372,.T.);+#4372=EDGE_CURVE('',#4368,#4373,#4375,.T.);+#4373=VERTEX_POINT('',#4374);+#4374=CARTESIAN_POINT('',(4.47343803089,-5.92,0.282635182233));+#4375=CIRCLE('',#4376,1.E-01);+#4376=AXIS2_PLACEMENT_3D('',#4355,#87,#3054);+#4377=ORIENTED_EDGE('',*,*,#4378,.T.);+#4378=EDGE_CURVE('',#4373,#4379,#4381,.T.);+#4379=VERTEX_POINT('',#4380);+#4380=CARTESIAN_POINT('',(4.295442325904,-5.92,1.3270944533));+#4381=LINE('',#4374,#3060);+#4382=ORIENTED_EDGE('',*,*,#4383,.T.);+#4383=EDGE_CURVE('',#4379,#4384,#4385,.T.);+#4384=VERTEX_POINT('',#1599);+#4385=CIRCLE('',#4386,0.3);+#4386=AXIS2_PLACEMENT_3D('',#4335,#59,#3066);+#4387=ORIENTED_EDGE('',*,*,#4388,.T.);+#4388=EDGE_CURVE('',#4384,#1246,#1598,.T.);+#4389=PLANE('',#4390);+#4390=AXIS2_PLACEMENT_3D('',#4391,#59,#13);+#4391=CARTESIAN_POINT('',(4.341787690374,-5.92,0.743634917138));+#4392=ADVANCED_FACE('',(#4393),#4400,.T.);+#4393=FACE_BOUND('',#4394,.F.);+#4394=EDGE_LOOP('',(#4395,#2998,#4398,#4399));+#4395=ORIENTED_EDGE('',*,*,#4396,.T.);+#4396=EDGE_CURVE('',#2929,#2995,#4397,.T.);+#4397=LINE('',#2930,#492);+#4398=ORIENTED_EDGE('',*,*,#1308,.F.);+#4399=ORIENTED_EDGE('',*,*,#2933,.F.);+#4400=CYLINDRICAL_SURFACE('',#4401,0.3);+#4401=AXIS2_PLACEMENT_3D('',#2893,#1692,#1669);+#4402=ADVANCED_FACE('',(#4403),#4412,.F.);+#4403=FACE_BOUND('',#4404,.F.);+#4404=EDGE_LOOP('',(#4405,#4406,#1740,#4409,#4410,#4411));+#4405=ORIENTED_EDGE('',*,*,#1671,.F.);+#4406=ORIENTED_EDGE('',*,*,#4407,.T.);+#4407=EDGE_CURVE('',#1665,#1736,#4408,.T.);+#4408=LINE('',#1580,#492);+#4409=ORIENTED_EDGE('',*,*,#1756,.T.);+#4410=ORIENTED_EDGE('',*,*,#1332,.F.);+#4411=ORIENTED_EDGE('',*,*,#1578,.F.);+#4412=PLANE('',#4413);+#4413=AXIS2_PLACEMENT_3D('',#1580,#1322,#431);+#4414=ADVANCED_FACE('',(#4415),#4424,.F.);+#4415=FACE_BOUND('',#4416,.F.);+#4416=EDGE_LOOP('',(#4417,#4418,#1881,#4421,#4422,#4423));+#4417=ORIENTED_EDGE('',*,*,#1813,.F.);+#4418=ORIENTED_EDGE('',*,*,#4419,.T.);+#4419=EDGE_CURVE('',#1809,#1877,#4420,.T.);+#4420=LINE('',#1753,#492);+#4421=ORIENTED_EDGE('',*,*,#1897,.T.);+#4422=ORIENTED_EDGE('',*,*,#1340,.F.);+#4423=ORIENTED_EDGE('',*,*,#1751,.F.);+#4424=PLANE('',#4425);+#4425=AXIS2_PLACEMENT_3D('',#1753,#1322,#431);+#4426=ADVANCED_FACE('',(#4427),#4436,.F.);+#4427=FACE_BOUND('',#4428,.F.);+#4428=EDGE_LOOP('',(#4429,#4430,#2022,#4433,#4434,#4435));+#4429=ORIENTED_EDGE('',*,*,#1954,.F.);+#4430=ORIENTED_EDGE('',*,*,#4431,.T.);+#4431=EDGE_CURVE('',#1950,#2018,#4432,.T.);+#4432=LINE('',#1894,#492);+#4433=ORIENTED_EDGE('',*,*,#2038,.T.);+#4434=ORIENTED_EDGE('',*,*,#1348,.F.);+#4435=ORIENTED_EDGE('',*,*,#1892,.F.);+#4436=PLANE('',#4437);+#4437=AXIS2_PLACEMENT_3D('',#1894,#1322,#431);+#4438=ADVANCED_FACE('',(#4439),#4448,.F.);+#4439=FACE_BOUND('',#4440,.F.);+#4440=EDGE_LOOP('',(#4441,#4442,#2163,#4445,#4446,#4447));+#4441=ORIENTED_EDGE('',*,*,#2095,.F.);+#4442=ORIENTED_EDGE('',*,*,#4443,.T.);+#4443=EDGE_CURVE('',#2091,#2159,#4444,.T.);+#4444=LINE('',#2035,#492);+#4445=ORIENTED_EDGE('',*,*,#2179,.T.);+#4446=ORIENTED_EDGE('',*,*,#1356,.F.);+#4447=ORIENTED_EDGE('',*,*,#2033,.F.);+#4448=PLANE('',#4449);+#4449=AXIS2_PLACEMENT_3D('',#2035,#1322,#431);+#4450=ADVANCED_FACE('',(#4451),#4460,.F.);+#4451=FACE_BOUND('',#4452,.F.);+#4452=EDGE_LOOP('',(#4453,#4454,#2304,#4457,#4458,#4459));+#4453=ORIENTED_EDGE('',*,*,#2236,.F.);+#4454=ORIENTED_EDGE('',*,*,#4455,.T.);+#4455=EDGE_CURVE('',#2232,#2300,#4456,.T.);+#4456=LINE('',#2176,#492);+#4457=ORIENTED_EDGE('',*,*,#2320,.T.);+#4458=ORIENTED_EDGE('',*,*,#1364,.F.);+#4459=ORIENTED_EDGE('',*,*,#2174,.F.);+#4460=PLANE('',#4461);+#4461=AXIS2_PLACEMENT_3D('',#2176,#1322,#431);+#4462=ADVANCED_FACE('',(#4463),#4472,.F.);+#4463=FACE_BOUND('',#4464,.F.);+#4464=EDGE_LOOP('',(#4465,#4466,#2445,#4469,#4470,#4471));+#4465=ORIENTED_EDGE('',*,*,#2377,.F.);+#4466=ORIENTED_EDGE('',*,*,#4467,.T.);+#4467=EDGE_CURVE('',#2373,#2441,#4468,.T.);+#4468=LINE('',#2317,#492);+#4469=ORIENTED_EDGE('',*,*,#2461,.T.);+#4470=ORIENTED_EDGE('',*,*,#1372,.F.);+#4471=ORIENTED_EDGE('',*,*,#2315,.F.);+#4472=PLANE('',#4473);+#4473=AXIS2_PLACEMENT_3D('',#2317,#1322,#431);+#4474=ADVANCED_FACE('',(#4475),#4484,.F.);+#4475=FACE_BOUND('',#4476,.F.);+#4476=EDGE_LOOP('',(#4477,#4478,#2586,#4481,#4482,#4483));+#4477=ORIENTED_EDGE('',*,*,#2518,.F.);+#4478=ORIENTED_EDGE('',*,*,#4479,.T.);+#4479=EDGE_CURVE('',#2514,#2582,#4480,.T.);+#4480=LINE('',#2458,#492);+#4481=ORIENTED_EDGE('',*,*,#2602,.T.);+#4482=ORIENTED_EDGE('',*,*,#1380,.F.);+#4483=ORIENTED_EDGE('',*,*,#2456,.F.);+#4484=PLANE('',#4485);+#4485=AXIS2_PLACEMENT_3D('',#2458,#1322,#431);+#4486=ADVANCED_FACE('',(#4487),#4496,.F.);+#4487=FACE_BOUND('',#4488,.F.);+#4488=EDGE_LOOP('',(#4489,#4490,#2727,#4493,#4494,#4495));+#4489=ORIENTED_EDGE('',*,*,#2659,.F.);+#4490=ORIENTED_EDGE('',*,*,#4491,.T.);+#4491=EDGE_CURVE('',#2655,#2723,#4492,.T.);+#4492=LINE('',#2599,#492);+#4493=ORIENTED_EDGE('',*,*,#2743,.T.);+#4494=ORIENTED_EDGE('',*,*,#1388,.F.);+#4495=ORIENTED_EDGE('',*,*,#2597,.F.);+#4496=PLANE('',#4497);+#4497=AXIS2_PLACEMENT_3D('',#2599,#1322,#431);+#4498=ADVANCED_FACE('',(#4499),#4508,.F.);+#4499=FACE_BOUND('',#4500,.F.);+#4500=EDGE_LOOP('',(#4501,#4502,#2868,#4505,#4506,#4507));+#4501=ORIENTED_EDGE('',*,*,#2800,.F.);+#4502=ORIENTED_EDGE('',*,*,#4503,.T.);+#4503=EDGE_CURVE('',#2796,#2864,#4504,.T.);+#4504=LINE('',#2740,#492);+#4505=ORIENTED_EDGE('',*,*,#2881,.T.);+#4506=ORIENTED_EDGE('',*,*,#1396,.F.);+#4507=ORIENTED_EDGE('',*,*,#2738,.F.);+#4508=PLANE('',#4509);+#4509=AXIS2_PLACEMENT_3D('',#2740,#1322,#431);+#4510=ADVANCED_FACE('',(#4511,#4526),#4536,.T.);+#4511=FACE_BOUND('',#4512,.T.);+#4512=EDGE_LOOP('',(#1440,#1426,#1408,#4513,#4518,#4523,#1548,#1454));+#4513=ORIENTED_EDGE('',*,*,#4514,.F.);+#4514=EDGE_CURVE('',#4515,#1410,#4517,.T.);+#4515=VERTEX_POINT('',#4516);+#4516=CARTESIAN_POINT('',(-3.444449141309,-6.138898282619,2.75));+#4517=LINE('',#4516,#79);+#4518=ORIENTED_EDGE('',*,*,#4519,.F.);+#4519=EDGE_CURVE('',#4520,#4515,#4522,.T.);+#4520=VERTEX_POINT('',#4521);+#4521=CARTESIAN_POINT('',(3.444449141309,-6.138898282619,2.75));+#4522=LINE('',#4521,#72);+#4523=ORIENTED_EDGE('',*,*,#4524,.F.);+#4524=EDGE_CURVE('',#1545,#4520,#4525,.T.);+#4525=LINE('',#1546,#65);+#4526=FACE_BOUND('',#4527,.T.);+#4527=EDGE_LOOP('',(#4528));+#4528=ORIENTED_EDGE('',*,*,#4529,.T.);+#4529=EDGE_CURVE('',#4530,#4530,#4532,.T.);+#4530=VERTEX_POINT('',#4531);+#4531=CARTESIAN_POINT('',(-2.688898282619,5.038898282619,2.75));+#4532=CIRCLE('',#4533,0.3);+#4533=AXIS2_PLACEMENT_3D('',#4534,#4535,#59);+#4534=CARTESIAN_POINT('',(-2.688898282619,5.338898282619,2.75));+#4535=DIRECTION('',(0.,-0.,-1.));+#4536=PLANE('',#4537);+#4537=AXIS2_PLACEMENT_3D('',#1424,#13,#4538);+#4538=DIRECTION('',(0.489324119914,-0.872102004166,0.));+#4539=ADVANCED_FACE('',(#4540),#4547,.F.);+#4540=FACE_BOUND('',#4541,.F.);+#4541=EDGE_LOOP('',(#4542,#4543,#4513,#4544));+#4542=ORIENTED_EDGE('',*,*,#1583,.T.);+#4543=ORIENTED_EDGE('',*,*,#1414,.T.);+#4544=ORIENTED_EDGE('',*,*,#4545,.F.);+#4545=EDGE_CURVE('',#1584,#4515,#4546,.T.);+#4546=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1585,#4516),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4547=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1585,#4516),(#423,#1411)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4548=ADVANCED_FACE('',(#4549),#4558,.F.);+#4549=FACE_BOUND('',#4550,.F.);+#4550=EDGE_LOOP('',(#4551,#4552,#3268,#4555,#4556,#4557));+#4551=ORIENTED_EDGE('',*,*,#3201,.F.);+#4552=ORIENTED_EDGE('',*,*,#4553,.T.);+#4553=EDGE_CURVE('',#3197,#3264,#4554,.T.);+#4554=LINE('',#3143,#58);+#4555=ORIENTED_EDGE('',*,*,#3278,.T.);+#4556=ORIENTED_EDGE('',*,*,#1472,.F.);+#4557=ORIENTED_EDGE('',*,*,#3141,.F.);+#4558=PLANE('',#4559);+#4559=AXIS2_PLACEMENT_3D('',#3143,#1322,#73);+#4560=ADVANCED_FACE('',(#4561),#4570,.F.);+#4561=FACE_BOUND('',#4562,.F.);+#4562=EDGE_LOOP('',(#4563,#4564,#3408,#4567,#4568,#4569));+#4563=ORIENTED_EDGE('',*,*,#3341,.F.);+#4564=ORIENTED_EDGE('',*,*,#4565,.T.);+#4565=EDGE_CURVE('',#3337,#3404,#4566,.T.);+#4566=LINE('',#3283,#58);+#4567=ORIENTED_EDGE('',*,*,#3418,.T.);+#4568=ORIENTED_EDGE('',*,*,#1480,.F.);+#4569=ORIENTED_EDGE('',*,*,#3281,.F.);+#4570=PLANE('',#4571);+#4571=AXIS2_PLACEMENT_3D('',#3283,#1322,#73);+#4572=ADVANCED_FACE('',(#4573),#4582,.F.);+#4573=FACE_BOUND('',#4574,.F.);+#4574=EDGE_LOOP('',(#4575,#4576,#3548,#4579,#4580,#4581));+#4575=ORIENTED_EDGE('',*,*,#3481,.F.);+#4576=ORIENTED_EDGE('',*,*,#4577,.T.);+#4577=EDGE_CURVE('',#3477,#3544,#4578,.T.);+#4578=LINE('',#3423,#58);+#4579=ORIENTED_EDGE('',*,*,#3558,.T.);+#4580=ORIENTED_EDGE('',*,*,#1488,.F.);+#4581=ORIENTED_EDGE('',*,*,#3421,.F.);+#4582=PLANE('',#4583);+#4583=AXIS2_PLACEMENT_3D('',#3423,#1322,#73);+#4584=ADVANCED_FACE('',(#4585),#4594,.F.);+#4585=FACE_BOUND('',#4586,.F.);+#4586=EDGE_LOOP('',(#4587,#4588,#3688,#4591,#4592,#4593));+#4587=ORIENTED_EDGE('',*,*,#3621,.F.);+#4588=ORIENTED_EDGE('',*,*,#4589,.T.);+#4589=EDGE_CURVE('',#3617,#3684,#4590,.T.);+#4590=LINE('',#3563,#58);+#4591=ORIENTED_EDGE('',*,*,#3698,.T.);+#4592=ORIENTED_EDGE('',*,*,#1496,.F.);+#4593=ORIENTED_EDGE('',*,*,#3561,.F.);+#4594=PLANE('',#4595);+#4595=AXIS2_PLACEMENT_3D('',#3563,#1322,#73);+#4596=ADVANCED_FACE('',(#4597),#4606,.F.);+#4597=FACE_BOUND('',#4598,.F.);+#4598=EDGE_LOOP('',(#4599,#4600,#3828,#4603,#4604,#4605));+#4599=ORIENTED_EDGE('',*,*,#3761,.F.);+#4600=ORIENTED_EDGE('',*,*,#4601,.T.);+#4601=EDGE_CURVE('',#3757,#3824,#4602,.T.);+#4602=LINE('',#3703,#58);+#4603=ORIENTED_EDGE('',*,*,#3838,.T.);+#4604=ORIENTED_EDGE('',*,*,#1504,.F.);+#4605=ORIENTED_EDGE('',*,*,#3701,.F.);+#4606=PLANE('',#4607);+#4607=AXIS2_PLACEMENT_3D('',#3703,#1322,#73);+#4608=ADVANCED_FACE('',(#4609),#4618,.F.);+#4609=FACE_BOUND('',#4610,.F.);+#4610=EDGE_LOOP('',(#4611,#4612,#3968,#4615,#4616,#4617));+#4611=ORIENTED_EDGE('',*,*,#3901,.F.);+#4612=ORIENTED_EDGE('',*,*,#4613,.T.);+#4613=EDGE_CURVE('',#3897,#3964,#4614,.T.);+#4614=LINE('',#3843,#58);+#4615=ORIENTED_EDGE('',*,*,#3978,.T.);+#4616=ORIENTED_EDGE('',*,*,#1512,.F.);+#4617=ORIENTED_EDGE('',*,*,#3841,.F.);+#4618=PLANE('',#4619);+#4619=AXIS2_PLACEMENT_3D('',#3843,#1322,#73);+#4620=ADVANCED_FACE('',(#4621),#4630,.F.);+#4621=FACE_BOUND('',#4622,.F.);+#4622=EDGE_LOOP('',(#4623,#4624,#4108,#4627,#4628,#4629));+#4623=ORIENTED_EDGE('',*,*,#4041,.F.);+#4624=ORIENTED_EDGE('',*,*,#4625,.T.);+#4625=EDGE_CURVE('',#4037,#4104,#4626,.T.);+#4626=LINE('',#3983,#58);+#4627=ORIENTED_EDGE('',*,*,#4118,.T.);+#4628=ORIENTED_EDGE('',*,*,#1520,.F.);+#4629=ORIENTED_EDGE('',*,*,#3981,.F.);+#4630=PLANE('',#4631);+#4631=AXIS2_PLACEMENT_3D('',#3983,#1322,#73);+#4632=ADVANCED_FACE('',(#4633),#4642,.F.);+#4633=FACE_BOUND('',#4634,.F.);+#4634=EDGE_LOOP('',(#4635,#4636,#4248,#4639,#4640,#4641));+#4635=ORIENTED_EDGE('',*,*,#4181,.F.);+#4636=ORIENTED_EDGE('',*,*,#4637,.T.);+#4637=EDGE_CURVE('',#4177,#4244,#4638,.T.);+#4638=LINE('',#4123,#58);+#4639=ORIENTED_EDGE('',*,*,#4258,.T.);+#4640=ORIENTED_EDGE('',*,*,#1528,.F.);+#4641=ORIENTED_EDGE('',*,*,#4121,.F.);+#4642=PLANE('',#4643);+#4643=AXIS2_PLACEMENT_3D('',#4123,#1322,#73);+#4644=ADVANCED_FACE('',(#4645),#4654,.F.);+#4645=FACE_BOUND('',#4646,.F.);+#4646=EDGE_LOOP('',(#4647,#4648,#4387,#4651,#4652,#4653));+#4647=ORIENTED_EDGE('',*,*,#4321,.F.);+#4648=ORIENTED_EDGE('',*,*,#4649,.T.);+#4649=EDGE_CURVE('',#4317,#4384,#4650,.T.);+#4650=LINE('',#4263,#58);+#4651=ORIENTED_EDGE('',*,*,#1597,.T.);+#4652=ORIENTED_EDGE('',*,*,#1536,.F.);+#4653=ORIENTED_EDGE('',*,*,#4261,.F.);+#4654=PLANE('',#4655);+#4655=AXIS2_PLACEMENT_3D('',#4263,#1322,#73);+#4656=ADVANCED_FACE('',(#4657),#4664,.F.);+#4657=FACE_BOUND('',#4658,.F.);+#4658=EDGE_LOOP('',(#4659,#4660,#4523,#4663));+#4659=ORIENTED_EDGE('',*,*,#1593,.T.);+#4660=ORIENTED_EDGE('',*,*,#4661,.T.);+#4661=EDGE_CURVE('',#1589,#4520,#4662,.T.);+#4662=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1590,#4521),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4663=ORIENTED_EDGE('',*,*,#1544,.F.);+#4664=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1542,#1546),(#1590,#4521)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4665=ADVANCED_FACE('',(#4666),#4673,.T.);+#4666=FACE_BOUND('',#4667,.F.);+#4667=EDGE_LOOP('',(#4668,#3128,#4671,#4672));+#4668=ORIENTED_EDGE('',*,*,#4669,.T.);+#4669=EDGE_CURVE('',#3057,#3125,#4670,.T.);+#4670=LINE('',#3058,#58);+#4671=ORIENTED_EDGE('',*,*,#1560,.F.);+#4672=ORIENTED_EDGE('',*,*,#3063,.F.);+#4673=CYLINDRICAL_SURFACE('',#4674,0.3);+#4674=AXIS2_PLACEMENT_3D('',#3016,#87,#3066);+#4675=ADVANCED_FACE('',(#4676),#4681,.F.);+#4676=FACE_BOUND('',#4677,.F.);+#4677=EDGE_LOOP('',(#4678,#4679,#4518,#4680));+#4678=ORIENTED_EDGE('',*,*,#1588,.T.);+#4679=ORIENTED_EDGE('',*,*,#4545,.T.);+#4680=ORIENTED_EDGE('',*,*,#4661,.F.);+#4681=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1590,#4521),(#1585,#4516)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4682=ADVANCED_FACE('',(#4683),#4690,.T.);+#4683=FACE_BOUND('',#4684,.F.);+#4684=EDGE_LOOP('',(#4685,#1734,#4688,#4689));+#4685=ORIENTED_EDGE('',*,*,#4686,.T.);+#4686=EDGE_CURVE('',#1658,#1731,#4687,.T.);+#4687=LINE('',#1659,#492);+#4688=ORIENTED_EDGE('',*,*,#4407,.F.);+#4689=ORIENTED_EDGE('',*,*,#1664,.F.);+#4690=CYLINDRICAL_SURFACE('',#4691,0.3);+#4691=AXIS2_PLACEMENT_3D('',#1615,#1692,#1669);+#4692=ADVANCED_FACE('',(#4693),#4700,.F.);+#4693=FACE_BOUND('',#4694,.F.);+#4694=EDGE_LOOP('',(#4695,#1729,#4698,#4699));+#4695=ORIENTED_EDGE('',*,*,#4696,.T.);+#4696=EDGE_CURVE('',#1650,#1725,#4697,.T.);+#4697=LINE('',#1651,#492);+#4698=ORIENTED_EDGE('',*,*,#4686,.F.);+#4699=ORIENTED_EDGE('',*,*,#1657,.F.);+#4700=PLANE('',#4701);+#4701=AXIS2_PLACEMENT_3D('',#1651,#4702,#1662);+#4702=DIRECTION('',(0.985787519508,-1.127975288589E-17,-0.167996923731));+#4703=ADVANCED_FACE('',(#4704),#4711,.F.);+#4704=FACE_BOUND('',#4705,.F.);+#4705=EDGE_LOOP('',(#4706,#1723,#4709,#4710));+#4706=ORIENTED_EDGE('',*,*,#4707,.T.);+#4707=EDGE_CURVE('',#1645,#1720,#4708,.T.);+#4708=LINE('',#1646,#492);+#4709=ORIENTED_EDGE('',*,*,#4696,.F.);+#4710=ORIENTED_EDGE('',*,*,#1649,.F.);+#4711=CYLINDRICAL_SURFACE('',#4712,1.E-01);+#4712=AXIS2_PLACEMENT_3D('',#1631,#1692,#1655);+#4713=ADVANCED_FACE('',(#4714),#4721,.F.);+#4714=FACE_BOUND('',#4715,.F.);+#4715=EDGE_LOOP('',(#4716,#1718,#4719,#4720));+#4716=ORIENTED_EDGE('',*,*,#4717,.T.);+#4717=EDGE_CURVE('',#1640,#1715,#4718,.T.);+#4718=LINE('',#1641,#492);+#4719=ORIENTED_EDGE('',*,*,#4707,.F.);+#4720=ORIENTED_EDGE('',*,*,#1644,.F.);+#4721=PLANE('',#4722);+#4722=AXIS2_PLACEMENT_3D('',#1641,#1322,#431);+#4723=ADVANCED_FACE('',(#4724),#4731,.F.);+#4724=FACE_BOUND('',#4725,.F.);+#4725=EDGE_LOOP('',(#4726,#1713,#4729,#4730));+#4726=ORIENTED_EDGE('',*,*,#4727,.T.);+#4727=EDGE_CURVE('',#1635,#1710,#4728,.T.);+#4728=LINE('',#1636,#492);+#4729=ORIENTED_EDGE('',*,*,#4717,.F.);+#4730=ORIENTED_EDGE('',*,*,#1639,.F.);+#4731=PLANE('',#4732);+#4732=AXIS2_PLACEMENT_3D('',#1636,#431,#13);+#4733=ADVANCED_FACE('',(#4734),#4741,.F.);+#4734=FACE_BOUND('',#4735,.F.);+#4735=EDGE_LOOP('',(#4736,#1708,#4739,#4740));+#4736=ORIENTED_EDGE('',*,*,#4737,.T.);+#4737=EDGE_CURVE('',#1627,#1703,#4738,.T.);+#4738=LINE('',#1628,#492);+#4739=ORIENTED_EDGE('',*,*,#4727,.F.);+#4740=ORIENTED_EDGE('',*,*,#1634,.F.);+#4741=PLANE('',#4742);+#4742=AXIS2_PLACEMENT_3D('',#1628,#13,#481);+#4743=ADVANCED_FACE('',(#4744),#4751,.T.);+#4744=FACE_BOUND('',#4745,.F.);+#4745=EDGE_LOOP('',(#4746,#1701,#4749,#4750));+#4746=ORIENTED_EDGE('',*,*,#4747,.T.);+#4747=EDGE_CURVE('',#1620,#1698,#4748,.T.);+#4748=LINE('',#1621,#492);+#4749=ORIENTED_EDGE('',*,*,#4737,.F.);+#4750=ORIENTED_EDGE('',*,*,#1626,.F.);+#4751=CYLINDRICAL_SURFACE('',#4752,0.3);+#4752=AXIS2_PLACEMENT_3D('',#1631,#1692,#1632);+#4753=ADVANCED_FACE('',(#4754),#4759,.F.);+#4754=FACE_BOUND('',#4755,.F.);+#4755=EDGE_LOOP('',(#4756,#1696,#4757,#4758));+#4756=ORIENTED_EDGE('',*,*,#1687,.T.);+#4757=ORIENTED_EDGE('',*,*,#4747,.F.);+#4758=ORIENTED_EDGE('',*,*,#1619,.F.);+#4759=PLANE('',#4760);+#4760=AXIS2_PLACEMENT_3D('',#1612,#4761,#1624);+#4761=DIRECTION('',(-0.985787519508,1.127975288589E-17,0.167996923731));+#4762=ADVANCED_FACE('',(#4763),#4770,.T.);+#4763=FACE_BOUND('',#4764,.F.);+#4764=EDGE_LOOP('',(#4765,#1875,#4768,#4769));+#4765=ORIENTED_EDGE('',*,*,#4766,.T.);+#4766=EDGE_CURVE('',#1804,#1872,#4767,.T.);+#4767=LINE('',#1805,#492);+#4768=ORIENTED_EDGE('',*,*,#4419,.F.);+#4769=ORIENTED_EDGE('',*,*,#1808,.F.);+#4770=CYLINDRICAL_SURFACE('',#4771,0.3);+#4771=AXIS2_PLACEMENT_3D('',#1768,#1692,#1669);+#4772=ADVANCED_FACE('',(#4773),#4780,.F.);+#4773=FACE_BOUND('',#4774,.F.);+#4774=EDGE_LOOP('',(#4775,#1870,#4778,#4779));+#4775=ORIENTED_EDGE('',*,*,#4776,.T.);+#4776=EDGE_CURVE('',#1798,#1866,#4777,.T.);+#4777=LINE('',#1799,#492);+#4778=ORIENTED_EDGE('',*,*,#4766,.F.);+#4779=ORIENTED_EDGE('',*,*,#1803,.F.);+#4780=PLANE('',#4781);+#4781=AXIS2_PLACEMENT_3D('',#1799,#4702,#1662);+#4782=ADVANCED_FACE('',(#4783),#4790,.F.);+#4783=FACE_BOUND('',#4784,.F.);+#4784=EDGE_LOOP('',(#4785,#1864,#4788,#4789));+#4785=ORIENTED_EDGE('',*,*,#4786,.T.);+#4786=EDGE_CURVE('',#1793,#1861,#4787,.T.);+#4787=LINE('',#1794,#492);+#4788=ORIENTED_EDGE('',*,*,#4776,.F.);+#4789=ORIENTED_EDGE('',*,*,#1797,.F.);+#4790=CYLINDRICAL_SURFACE('',#4791,1.E-01);+#4791=AXIS2_PLACEMENT_3D('',#1780,#1692,#1655);+#4792=ADVANCED_FACE('',(#4793),#4800,.F.);+#4793=FACE_BOUND('',#4794,.F.);+#4794=EDGE_LOOP('',(#4795,#1859,#4798,#4799));+#4795=ORIENTED_EDGE('',*,*,#4796,.T.);+#4796=EDGE_CURVE('',#1788,#1856,#4797,.T.);+#4797=LINE('',#1789,#492);+#4798=ORIENTED_EDGE('',*,*,#4786,.F.);+#4799=ORIENTED_EDGE('',*,*,#1792,.F.);+#4800=PLANE('',#4801);+#4801=AXIS2_PLACEMENT_3D('',#1789,#1322,#431);+#4802=ADVANCED_FACE('',(#4803),#4810,.F.);+#4803=FACE_BOUND('',#4804,.F.);+#4804=EDGE_LOOP('',(#4805,#1854,#4808,#4809));+#4805=ORIENTED_EDGE('',*,*,#4806,.T.);+#4806=EDGE_CURVE('',#1783,#1851,#4807,.T.);+#4807=LINE('',#1784,#492);+#4808=ORIENTED_EDGE('',*,*,#4796,.F.);+#4809=ORIENTED_EDGE('',*,*,#1787,.F.);+#4810=PLANE('',#4811);+#4811=AXIS2_PLACEMENT_3D('',#1784,#431,#13);+#4812=ADVANCED_FACE('',(#4813),#4820,.F.);+#4813=FACE_BOUND('',#4814,.F.);+#4814=EDGE_LOOP('',(#4815,#1849,#4818,#4819));+#4815=ORIENTED_EDGE('',*,*,#4816,.T.);+#4816=EDGE_CURVE('',#1776,#1844,#4817,.T.);+#4817=LINE('',#1777,#492);+#4818=ORIENTED_EDGE('',*,*,#4806,.F.);+#4819=ORIENTED_EDGE('',*,*,#1782,.F.);+#4820=PLANE('',#4821);+#4821=AXIS2_PLACEMENT_3D('',#1777,#13,#481);+#4822=ADVANCED_FACE('',(#4823),#4830,.T.);+#4823=FACE_BOUND('',#4824,.F.);+#4824=EDGE_LOOP('',(#4825,#1842,#4828,#4829));+#4825=ORIENTED_EDGE('',*,*,#4826,.T.);+#4826=EDGE_CURVE('',#1771,#1839,#4827,.T.);+#4827=LINE('',#1772,#492);+#4828=ORIENTED_EDGE('',*,*,#4816,.F.);+#4829=ORIENTED_EDGE('',*,*,#1775,.F.);+#4830=CYLINDRICAL_SURFACE('',#4831,0.3);+#4831=AXIS2_PLACEMENT_3D('',#1780,#1692,#1632);+#4832=ADVANCED_FACE('',(#4833),#4838,.F.);+#4833=FACE_BOUND('',#4834,.F.);+#4834=EDGE_LOOP('',(#4835,#1837,#4836,#4837));+#4835=ORIENTED_EDGE('',*,*,#1829,.T.);+#4836=ORIENTED_EDGE('',*,*,#4826,.F.);+#4837=ORIENTED_EDGE('',*,*,#1770,.F.);+#4838=PLANE('',#4839);+#4839=AXIS2_PLACEMENT_3D('',#1765,#4761,#1624);+#4840=ADVANCED_FACE('',(#4841),#4848,.T.);+#4841=FACE_BOUND('',#4842,.F.);+#4842=EDGE_LOOP('',(#4843,#2016,#4846,#4847));+#4843=ORIENTED_EDGE('',*,*,#4844,.T.);+#4844=EDGE_CURVE('',#1945,#2013,#4845,.T.);+#4845=LINE('',#1946,#492);+#4846=ORIENTED_EDGE('',*,*,#4431,.F.);+#4847=ORIENTED_EDGE('',*,*,#1949,.F.);+#4848=CYLINDRICAL_SURFACE('',#4849,0.3);+#4849=AXIS2_PLACEMENT_3D('',#1909,#1692,#1669);+#4850=ADVANCED_FACE('',(#4851),#4858,.F.);+#4851=FACE_BOUND('',#4852,.F.);+#4852=EDGE_LOOP('',(#4853,#2011,#4856,#4857));+#4853=ORIENTED_EDGE('',*,*,#4854,.T.);+#4854=EDGE_CURVE('',#1939,#2007,#4855,.T.);+#4855=LINE('',#1940,#492);+#4856=ORIENTED_EDGE('',*,*,#4844,.F.);+#4857=ORIENTED_EDGE('',*,*,#1944,.F.);+#4858=PLANE('',#4859);+#4859=AXIS2_PLACEMENT_3D('',#1940,#4702,#1662);+#4860=ADVANCED_FACE('',(#4861),#4868,.F.);+#4861=FACE_BOUND('',#4862,.F.);+#4862=EDGE_LOOP('',(#4863,#2005,#4866,#4867));+#4863=ORIENTED_EDGE('',*,*,#4864,.T.);+#4864=EDGE_CURVE('',#1934,#2002,#4865,.T.);+#4865=LINE('',#1935,#492);+#4866=ORIENTED_EDGE('',*,*,#4854,.F.);+#4867=ORIENTED_EDGE('',*,*,#1938,.F.);+#4868=CYLINDRICAL_SURFACE('',#4869,1.E-01);+#4869=AXIS2_PLACEMENT_3D('',#1921,#1692,#1655);+#4870=ADVANCED_FACE('',(#4871),#4878,.F.);+#4871=FACE_BOUND('',#4872,.F.);+#4872=EDGE_LOOP('',(#4873,#2000,#4876,#4877));+#4873=ORIENTED_EDGE('',*,*,#4874,.T.);+#4874=EDGE_CURVE('',#1929,#1997,#4875,.T.);+#4875=LINE('',#1930,#492);+#4876=ORIENTED_EDGE('',*,*,#4864,.F.);+#4877=ORIENTED_EDGE('',*,*,#1933,.F.);+#4878=PLANE('',#4879);+#4879=AXIS2_PLACEMENT_3D('',#1930,#1322,#431);+#4880=ADVANCED_FACE('',(#4881),#4888,.F.);+#4881=FACE_BOUND('',#4882,.F.);+#4882=EDGE_LOOP('',(#4883,#1995,#4886,#4887));+#4883=ORIENTED_EDGE('',*,*,#4884,.T.);+#4884=EDGE_CURVE('',#1924,#1992,#4885,.T.);+#4885=LINE('',#1925,#492);+#4886=ORIENTED_EDGE('',*,*,#4874,.F.);+#4887=ORIENTED_EDGE('',*,*,#1928,.F.);+#4888=PLANE('',#4889);+#4889=AXIS2_PLACEMENT_3D('',#1925,#431,#13);+#4890=ADVANCED_FACE('',(#4891),#4898,.F.);+#4891=FACE_BOUND('',#4892,.F.);+#4892=EDGE_LOOP('',(#4893,#1990,#4896,#4897));+#4893=ORIENTED_EDGE('',*,*,#4894,.T.);+#4894=EDGE_CURVE('',#1917,#1985,#4895,.T.);+#4895=LINE('',#1918,#492);+#4896=ORIENTED_EDGE('',*,*,#4884,.F.);+#4897=ORIENTED_EDGE('',*,*,#1923,.F.);+#4898=PLANE('',#4899);+#4899=AXIS2_PLACEMENT_3D('',#1918,#13,#481);+#4900=ADVANCED_FACE('',(#4901),#4908,.T.);+#4901=FACE_BOUND('',#4902,.F.);+#4902=EDGE_LOOP('',(#4903,#1983,#4906,#4907));+#4903=ORIENTED_EDGE('',*,*,#4904,.T.);+#4904=EDGE_CURVE('',#1912,#1980,#4905,.T.);+#4905=LINE('',#1913,#492);+#4906=ORIENTED_EDGE('',*,*,#4894,.F.);+#4907=ORIENTED_EDGE('',*,*,#1916,.F.);+#4908=CYLINDRICAL_SURFACE('',#4909,0.3);+#4909=AXIS2_PLACEMENT_3D('',#1921,#1692,#1632);+#4910=ADVANCED_FACE('',(#4911),#4916,.F.);+#4911=FACE_BOUND('',#4912,.F.);+#4912=EDGE_LOOP('',(#4913,#1978,#4914,#4915));+#4913=ORIENTED_EDGE('',*,*,#1970,.T.);+#4914=ORIENTED_EDGE('',*,*,#4904,.F.);+#4915=ORIENTED_EDGE('',*,*,#1911,.F.);+#4916=PLANE('',#4917);+#4917=AXIS2_PLACEMENT_3D('',#1906,#4761,#1624);+#4918=ADVANCED_FACE('',(#4919),#4926,.T.);+#4919=FACE_BOUND('',#4920,.F.);+#4920=EDGE_LOOP('',(#4921,#2157,#4924,#4925));+#4921=ORIENTED_EDGE('',*,*,#4922,.T.);+#4922=EDGE_CURVE('',#2086,#2154,#4923,.T.);+#4923=LINE('',#2087,#492);+#4924=ORIENTED_EDGE('',*,*,#4443,.F.);+#4925=ORIENTED_EDGE('',*,*,#2090,.F.);+#4926=CYLINDRICAL_SURFACE('',#4927,0.3);+#4927=AXIS2_PLACEMENT_3D('',#2050,#1692,#1669);+#4928=ADVANCED_FACE('',(#4929),#4936,.F.);+#4929=FACE_BOUND('',#4930,.F.);+#4930=EDGE_LOOP('',(#4931,#2152,#4934,#4935));+#4931=ORIENTED_EDGE('',*,*,#4932,.T.);+#4932=EDGE_CURVE('',#2080,#2148,#4933,.T.);+#4933=LINE('',#2081,#492);+#4934=ORIENTED_EDGE('',*,*,#4922,.F.);+#4935=ORIENTED_EDGE('',*,*,#2085,.F.);+#4936=PLANE('',#4937);+#4937=AXIS2_PLACEMENT_3D('',#2081,#4702,#1662);+#4938=ADVANCED_FACE('',(#4939),#4946,.F.);+#4939=FACE_BOUND('',#4940,.F.);+#4940=EDGE_LOOP('',(#4941,#2146,#4944,#4945));+#4941=ORIENTED_EDGE('',*,*,#4942,.T.);+#4942=EDGE_CURVE('',#2075,#2143,#4943,.T.);+#4943=LINE('',#2076,#492);+#4944=ORIENTED_EDGE('',*,*,#4932,.F.);+#4945=ORIENTED_EDGE('',*,*,#2079,.F.);+#4946=CYLINDRICAL_SURFACE('',#4947,1.E-01);+#4947=AXIS2_PLACEMENT_3D('',#2062,#1692,#1655);+#4948=ADVANCED_FACE('',(#4949),#4956,.F.);+#4949=FACE_BOUND('',#4950,.F.);+#4950=EDGE_LOOP('',(#4951,#2141,#4954,#4955));+#4951=ORIENTED_EDGE('',*,*,#4952,.T.);+#4952=EDGE_CURVE('',#2070,#2138,#4953,.T.);+#4953=LINE('',#2071,#492);+#4954=ORIENTED_EDGE('',*,*,#4942,.F.);+#4955=ORIENTED_EDGE('',*,*,#2074,.F.);+#4956=PLANE('',#4957);+#4957=AXIS2_PLACEMENT_3D('',#2071,#1322,#431);+#4958=ADVANCED_FACE('',(#4959),#4966,.F.);+#4959=FACE_BOUND('',#4960,.F.);+#4960=EDGE_LOOP('',(#4961,#2136,#4964,#4965));+#4961=ORIENTED_EDGE('',*,*,#4962,.T.);+#4962=EDGE_CURVE('',#2065,#2133,#4963,.T.);+#4963=LINE('',#2066,#492);+#4964=ORIENTED_EDGE('',*,*,#4952,.F.);+#4965=ORIENTED_EDGE('',*,*,#2069,.F.);+#4966=PLANE('',#4967);+#4967=AXIS2_PLACEMENT_3D('',#2066,#431,#13);+#4968=ADVANCED_FACE('',(#4969),#4976,.F.);+#4969=FACE_BOUND('',#4970,.F.);+#4970=EDGE_LOOP('',(#4971,#2131,#4974,#4975));+#4971=ORIENTED_EDGE('',*,*,#4972,.T.);+#4972=EDGE_CURVE('',#2058,#2126,#4973,.T.);+#4973=LINE('',#2059,#492);+#4974=ORIENTED_EDGE('',*,*,#4962,.F.);+#4975=ORIENTED_EDGE('',*,*,#2064,.F.);+#4976=PLANE('',#4977);+#4977=AXIS2_PLACEMENT_3D('',#2059,#13,#481);+#4978=ADVANCED_FACE('',(#4979),#4986,.T.);+#4979=FACE_BOUND('',#4980,.F.);+#4980=EDGE_LOOP('',(#4981,#2124,#4984,#4985));+#4981=ORIENTED_EDGE('',*,*,#4982,.T.);+#4982=EDGE_CURVE('',#2053,#2121,#4983,.T.);+#4983=LINE('',#2054,#492);+#4984=ORIENTED_EDGE('',*,*,#4972,.F.);+#4985=ORIENTED_EDGE('',*,*,#2057,.F.);+#4986=CYLINDRICAL_SURFACE('',#4987,0.3);+#4987=AXIS2_PLACEMENT_3D('',#2062,#1692,#1632);+#4988=ADVANCED_FACE('',(#4989),#4994,.F.);+#4989=FACE_BOUND('',#4990,.F.);+#4990=EDGE_LOOP('',(#4991,#2119,#4992,#4993));+#4991=ORIENTED_EDGE('',*,*,#2111,.T.);+#4992=ORIENTED_EDGE('',*,*,#4982,.F.);+#4993=ORIENTED_EDGE('',*,*,#2052,.F.);+#4994=PLANE('',#4995);+#4995=AXIS2_PLACEMENT_3D('',#2047,#4761,#1624);+#4996=ADVANCED_FACE('',(#4997),#5004,.T.);+#4997=FACE_BOUND('',#4998,.F.);+#4998=EDGE_LOOP('',(#4999,#2298,#5002,#5003));+#4999=ORIENTED_EDGE('',*,*,#5000,.T.);+#5000=EDGE_CURVE('',#2227,#2295,#5001,.T.);+#5001=LINE('',#2228,#492);+#5002=ORIENTED_EDGE('',*,*,#4455,.F.);+#5003=ORIENTED_EDGE('',*,*,#2231,.F.);+#5004=CYLINDRICAL_SURFACE('',#5005,0.3);+#5005=AXIS2_PLACEMENT_3D('',#2191,#1692,#1669);+#5006=ADVANCED_FACE('',(#5007),#5014,.F.);+#5007=FACE_BOUND('',#5008,.F.);+#5008=EDGE_LOOP('',(#5009,#2293,#5012,#5013));+#5009=ORIENTED_EDGE('',*,*,#5010,.T.);+#5010=EDGE_CURVE('',#2221,#2289,#5011,.T.);+#5011=LINE('',#2222,#492);+#5012=ORIENTED_EDGE('',*,*,#5000,.F.);+#5013=ORIENTED_EDGE('',*,*,#2226,.F.);+#5014=PLANE('',#5015);+#5015=AXIS2_PLACEMENT_3D('',#2222,#4702,#1662);+#5016=ADVANCED_FACE('',(#5017),#5024,.F.);+#5017=FACE_BOUND('',#5018,.F.);+#5018=EDGE_LOOP('',(#5019,#2287,#5022,#5023));+#5019=ORIENTED_EDGE('',*,*,#5020,.T.);+#5020=EDGE_CURVE('',#2216,#2284,#5021,.T.);+#5021=LINE('',#2217,#492);+#5022=ORIENTED_EDGE('',*,*,#5010,.F.);+#5023=ORIENTED_EDGE('',*,*,#2220,.F.);+#5024=CYLINDRICAL_SURFACE('',#5025,1.E-01);+#5025=AXIS2_PLACEMENT_3D('',#2203,#1692,#1655);+#5026=ADVANCED_FACE('',(#5027),#5034,.F.);+#5027=FACE_BOUND('',#5028,.F.);+#5028=EDGE_LOOP('',(#5029,#2282,#5032,#5033));+#5029=ORIENTED_EDGE('',*,*,#5030,.T.);+#5030=EDGE_CURVE('',#2211,#2279,#5031,.T.);+#5031=LINE('',#2212,#492);+#5032=ORIENTED_EDGE('',*,*,#5020,.F.);+#5033=ORIENTED_EDGE('',*,*,#2215,.F.);+#5034=PLANE('',#5035);+#5035=AXIS2_PLACEMENT_3D('',#2212,#1322,#431);+#5036=ADVANCED_FACE('',(#5037),#5044,.F.);+#5037=FACE_BOUND('',#5038,.F.);+#5038=EDGE_LOOP('',(#5039,#2277,#5042,#5043));+#5039=ORIENTED_EDGE('',*,*,#5040,.T.);+#5040=EDGE_CURVE('',#2206,#2274,#5041,.T.);+#5041=LINE('',#2207,#492);+#5042=ORIENTED_EDGE('',*,*,#5030,.F.);+#5043=ORIENTED_EDGE('',*,*,#2210,.F.);+#5044=PLANE('',#5045);+#5045=AXIS2_PLACEMENT_3D('',#2207,#431,#13);+#5046=ADVANCED_FACE('',(#5047),#5054,.F.);+#5047=FACE_BOUND('',#5048,.F.);+#5048=EDGE_LOOP('',(#5049,#2272,#5052,#5053));+#5049=ORIENTED_EDGE('',*,*,#5050,.T.);+#5050=EDGE_CURVE('',#2199,#2267,#5051,.T.);+#5051=LINE('',#2200,#492);+#5052=ORIENTED_EDGE('',*,*,#5040,.F.);+#5053=ORIENTED_EDGE('',*,*,#2205,.F.);+#5054=PLANE('',#5055);+#5055=AXIS2_PLACEMENT_3D('',#2200,#13,#481);+#5056=ADVANCED_FACE('',(#5057),#5064,.T.);+#5057=FACE_BOUND('',#5058,.F.);+#5058=EDGE_LOOP('',(#5059,#2265,#5062,#5063));+#5059=ORIENTED_EDGE('',*,*,#5060,.T.);+#5060=EDGE_CURVE('',#2194,#2262,#5061,.T.);+#5061=LINE('',#2195,#492);+#5062=ORIENTED_EDGE('',*,*,#5050,.F.);+#5063=ORIENTED_EDGE('',*,*,#2198,.F.);+#5064=CYLINDRICAL_SURFACE('',#5065,0.3);+#5065=AXIS2_PLACEMENT_3D('',#2203,#1692,#1632);+#5066=ADVANCED_FACE('',(#5067),#5072,.F.);+#5067=FACE_BOUND('',#5068,.F.);+#5068=EDGE_LOOP('',(#5069,#2260,#5070,#5071));+#5069=ORIENTED_EDGE('',*,*,#2252,.T.);+#5070=ORIENTED_EDGE('',*,*,#5060,.F.);+#5071=ORIENTED_EDGE('',*,*,#2193,.F.);+#5072=PLANE('',#5073);+#5073=AXIS2_PLACEMENT_3D('',#2188,#4761,#1624);+#5074=ADVANCED_FACE('',(#5075),#5082,.T.);+#5075=FACE_BOUND('',#5076,.F.);+#5076=EDGE_LOOP('',(#5077,#2439,#5080,#5081));+#5077=ORIENTED_EDGE('',*,*,#5078,.T.);+#5078=EDGE_CURVE('',#2368,#2436,#5079,.T.);+#5079=LINE('',#2369,#492);+#5080=ORIENTED_EDGE('',*,*,#4467,.F.);+#5081=ORIENTED_EDGE('',*,*,#2372,.F.);+#5082=CYLINDRICAL_SURFACE('',#5083,0.3);+#5083=AXIS2_PLACEMENT_3D('',#2332,#1692,#1669);+#5084=ADVANCED_FACE('',(#5085),#5092,.F.);+#5085=FACE_BOUND('',#5086,.F.);+#5086=EDGE_LOOP('',(#5087,#2434,#5090,#5091));+#5087=ORIENTED_EDGE('',*,*,#5088,.T.);+#5088=EDGE_CURVE('',#2362,#2430,#5089,.T.);+#5089=LINE('',#2363,#492);+#5090=ORIENTED_EDGE('',*,*,#5078,.F.);+#5091=ORIENTED_EDGE('',*,*,#2367,.F.);+#5092=PLANE('',#5093);+#5093=AXIS2_PLACEMENT_3D('',#2363,#4702,#1662);+#5094=ADVANCED_FACE('',(#5095),#5102,.F.);+#5095=FACE_BOUND('',#5096,.F.);+#5096=EDGE_LOOP('',(#5097,#2428,#5100,#5101));+#5097=ORIENTED_EDGE('',*,*,#5098,.T.);+#5098=EDGE_CURVE('',#2357,#2425,#5099,.T.);+#5099=LINE('',#2358,#492);+#5100=ORIENTED_EDGE('',*,*,#5088,.F.);+#5101=ORIENTED_EDGE('',*,*,#2361,.F.);+#5102=CYLINDRICAL_SURFACE('',#5103,1.E-01);+#5103=AXIS2_PLACEMENT_3D('',#2344,#1692,#1655);+#5104=ADVANCED_FACE('',(#5105),#5112,.F.);+#5105=FACE_BOUND('',#5106,.F.);+#5106=EDGE_LOOP('',(#5107,#2423,#5110,#5111));+#5107=ORIENTED_EDGE('',*,*,#5108,.T.);+#5108=EDGE_CURVE('',#2352,#2420,#5109,.T.);+#5109=LINE('',#2353,#492);+#5110=ORIENTED_EDGE('',*,*,#5098,.F.);+#5111=ORIENTED_EDGE('',*,*,#2356,.F.);+#5112=PLANE('',#5113);+#5113=AXIS2_PLACEMENT_3D('',#2353,#1322,#431);+#5114=ADVANCED_FACE('',(#5115),#5122,.F.);+#5115=FACE_BOUND('',#5116,.F.);+#5116=EDGE_LOOP('',(#5117,#2418,#5120,#5121));+#5117=ORIENTED_EDGE('',*,*,#5118,.T.);+#5118=EDGE_CURVE('',#2347,#2415,#5119,.T.);+#5119=LINE('',#2348,#492);+#5120=ORIENTED_EDGE('',*,*,#5108,.F.);+#5121=ORIENTED_EDGE('',*,*,#2351,.F.);+#5122=PLANE('',#5123);+#5123=AXIS2_PLACEMENT_3D('',#2348,#431,#13);+#5124=ADVANCED_FACE('',(#5125),#5132,.F.);+#5125=FACE_BOUND('',#5126,.F.);+#5126=EDGE_LOOP('',(#5127,#2413,#5130,#5131));+#5127=ORIENTED_EDGE('',*,*,#5128,.T.);+#5128=EDGE_CURVE('',#2340,#2408,#5129,.T.);+#5129=LINE('',#2341,#492);+#5130=ORIENTED_EDGE('',*,*,#5118,.F.);+#5131=ORIENTED_EDGE('',*,*,#2346,.F.);+#5132=PLANE('',#5133);+#5133=AXIS2_PLACEMENT_3D('',#2341,#13,#481);+#5134=ADVANCED_FACE('',(#5135),#5142,.T.);+#5135=FACE_BOUND('',#5136,.F.);+#5136=EDGE_LOOP('',(#5137,#2406,#5140,#5141));+#5137=ORIENTED_EDGE('',*,*,#5138,.T.);+#5138=EDGE_CURVE('',#2335,#2403,#5139,.T.);+#5139=LINE('',#2336,#492);+#5140=ORIENTED_EDGE('',*,*,#5128,.F.);+#5141=ORIENTED_EDGE('',*,*,#2339,.F.);+#5142=CYLINDRICAL_SURFACE('',#5143,0.3);+#5143=AXIS2_PLACEMENT_3D('',#2344,#1692,#1632);+#5144=ADVANCED_FACE('',(#5145),#5150,.F.);+#5145=FACE_BOUND('',#5146,.F.);+#5146=EDGE_LOOP('',(#5147,#2401,#5148,#5149));+#5147=ORIENTED_EDGE('',*,*,#2393,.T.);+#5148=ORIENTED_EDGE('',*,*,#5138,.F.);+#5149=ORIENTED_EDGE('',*,*,#2334,.F.);+#5150=PLANE('',#5151);+#5151=AXIS2_PLACEMENT_3D('',#2329,#4761,#1624);+#5152=ADVANCED_FACE('',(#5153),#5160,.T.);+#5153=FACE_BOUND('',#5154,.F.);+#5154=EDGE_LOOP('',(#5155,#2580,#5158,#5159));+#5155=ORIENTED_EDGE('',*,*,#5156,.T.);+#5156=EDGE_CURVE('',#2509,#2577,#5157,.T.);+#5157=LINE('',#2510,#492);+#5158=ORIENTED_EDGE('',*,*,#4479,.F.);+#5159=ORIENTED_EDGE('',*,*,#2513,.F.);+#5160=CYLINDRICAL_SURFACE('',#5161,0.3);+#5161=AXIS2_PLACEMENT_3D('',#2473,#1692,#1669);+#5162=ADVANCED_FACE('',(#5163),#5170,.F.);+#5163=FACE_BOUND('',#5164,.F.);+#5164=EDGE_LOOP('',(#5165,#2575,#5168,#5169));+#5165=ORIENTED_EDGE('',*,*,#5166,.T.);+#5166=EDGE_CURVE('',#2503,#2571,#5167,.T.);+#5167=LINE('',#2504,#492);+#5168=ORIENTED_EDGE('',*,*,#5156,.F.);+#5169=ORIENTED_EDGE('',*,*,#2508,.F.);+#5170=PLANE('',#5171);+#5171=AXIS2_PLACEMENT_3D('',#2504,#4702,#1662);+#5172=ADVANCED_FACE('',(#5173),#5180,.F.);+#5173=FACE_BOUND('',#5174,.F.);+#5174=EDGE_LOOP('',(#5175,#2569,#5178,#5179));+#5175=ORIENTED_EDGE('',*,*,#5176,.T.);+#5176=EDGE_CURVE('',#2498,#2566,#5177,.T.);+#5177=LINE('',#2499,#492);+#5178=ORIENTED_EDGE('',*,*,#5166,.F.);+#5179=ORIENTED_EDGE('',*,*,#2502,.F.);+#5180=CYLINDRICAL_SURFACE('',#5181,1.E-01);+#5181=AXIS2_PLACEMENT_3D('',#2485,#1692,#1655);+#5182=ADVANCED_FACE('',(#5183),#5190,.F.);+#5183=FACE_BOUND('',#5184,.F.);+#5184=EDGE_LOOP('',(#5185,#2564,#5188,#5189));+#5185=ORIENTED_EDGE('',*,*,#5186,.T.);+#5186=EDGE_CURVE('',#2493,#2561,#5187,.T.);+#5187=LINE('',#2494,#492);+#5188=ORIENTED_EDGE('',*,*,#5176,.F.);+#5189=ORIENTED_EDGE('',*,*,#2497,.F.);+#5190=PLANE('',#5191);+#5191=AXIS2_PLACEMENT_3D('',#2494,#1322,#431);+#5192=ADVANCED_FACE('',(#5193),#5200,.F.);+#5193=FACE_BOUND('',#5194,.F.);+#5194=EDGE_LOOP('',(#5195,#2559,#5198,#5199));+#5195=ORIENTED_EDGE('',*,*,#5196,.T.);+#5196=EDGE_CURVE('',#2488,#2556,#5197,.T.);+#5197=LINE('',#2489,#492);+#5198=ORIENTED_EDGE('',*,*,#5186,.F.);+#5199=ORIENTED_EDGE('',*,*,#2492,.F.);+#5200=PLANE('',#5201);+#5201=AXIS2_PLACEMENT_3D('',#2489,#431,#13);+#5202=ADVANCED_FACE('',(#5203),#5210,.F.);+#5203=FACE_BOUND('',#5204,.F.);+#5204=EDGE_LOOP('',(#5205,#2554,#5208,#5209));+#5205=ORIENTED_EDGE('',*,*,#5206,.T.);+#5206=EDGE_CURVE('',#2481,#2549,#5207,.T.);+#5207=LINE('',#2482,#492);+#5208=ORIENTED_EDGE('',*,*,#5196,.F.);+#5209=ORIENTED_EDGE('',*,*,#2487,.F.);+#5210=PLANE('',#5211);+#5211=AXIS2_PLACEMENT_3D('',#2482,#13,#481);+#5212=ADVANCED_FACE('',(#5213),#5220,.T.);+#5213=FACE_BOUND('',#5214,.F.);+#5214=EDGE_LOOP('',(#5215,#2547,#5218,#5219));+#5215=ORIENTED_EDGE('',*,*,#5216,.T.);+#5216=EDGE_CURVE('',#2476,#2544,#5217,.T.);+#5217=LINE('',#2477,#492);+#5218=ORIENTED_EDGE('',*,*,#5206,.F.);+#5219=ORIENTED_EDGE('',*,*,#2480,.F.);+#5220=CYLINDRICAL_SURFACE('',#5221,0.3);+#5221=AXIS2_PLACEMENT_3D('',#2485,#1692,#1632);+#5222=ADVANCED_FACE('',(#5223),#5228,.F.);+#5223=FACE_BOUND('',#5224,.F.);+#5224=EDGE_LOOP('',(#5225,#2542,#5226,#5227));+#5225=ORIENTED_EDGE('',*,*,#2534,.T.);+#5226=ORIENTED_EDGE('',*,*,#5216,.F.);+#5227=ORIENTED_EDGE('',*,*,#2475,.F.);+#5228=PLANE('',#5229);+#5229=AXIS2_PLACEMENT_3D('',#2470,#4761,#1624);+#5230=ADVANCED_FACE('',(#5231),#5238,.T.);+#5231=FACE_BOUND('',#5232,.F.);+#5232=EDGE_LOOP('',(#5233,#2721,#5236,#5237));+#5233=ORIENTED_EDGE('',*,*,#5234,.T.);+#5234=EDGE_CURVE('',#2650,#2718,#5235,.T.);+#5235=LINE('',#2651,#492);+#5236=ORIENTED_EDGE('',*,*,#4491,.F.);+#5237=ORIENTED_EDGE('',*,*,#2654,.F.);+#5238=CYLINDRICAL_SURFACE('',#5239,0.3);+#5239=AXIS2_PLACEMENT_3D('',#2614,#1692,#1669);+#5240=ADVANCED_FACE('',(#5241),#5248,.F.);+#5241=FACE_BOUND('',#5242,.F.);+#5242=EDGE_LOOP('',(#5243,#2716,#5246,#5247));+#5243=ORIENTED_EDGE('',*,*,#5244,.T.);+#5244=EDGE_CURVE('',#2644,#2712,#5245,.T.);+#5245=LINE('',#2645,#492);+#5246=ORIENTED_EDGE('',*,*,#5234,.F.);+#5247=ORIENTED_EDGE('',*,*,#2649,.F.);+#5248=PLANE('',#5249);+#5249=AXIS2_PLACEMENT_3D('',#2645,#4702,#1662);+#5250=ADVANCED_FACE('',(#5251),#5258,.F.);+#5251=FACE_BOUND('',#5252,.F.);+#5252=EDGE_LOOP('',(#5253,#2710,#5256,#5257));+#5253=ORIENTED_EDGE('',*,*,#5254,.T.);+#5254=EDGE_CURVE('',#2639,#2707,#5255,.T.);+#5255=LINE('',#2640,#492);+#5256=ORIENTED_EDGE('',*,*,#5244,.F.);+#5257=ORIENTED_EDGE('',*,*,#2643,.F.);+#5258=CYLINDRICAL_SURFACE('',#5259,1.E-01);+#5259=AXIS2_PLACEMENT_3D('',#2626,#1692,#1655);+#5260=ADVANCED_FACE('',(#5261),#5268,.F.);+#5261=FACE_BOUND('',#5262,.F.);+#5262=EDGE_LOOP('',(#5263,#2705,#5266,#5267));+#5263=ORIENTED_EDGE('',*,*,#5264,.T.);+#5264=EDGE_CURVE('',#2634,#2702,#5265,.T.);+#5265=LINE('',#2635,#492);+#5266=ORIENTED_EDGE('',*,*,#5254,.F.);+#5267=ORIENTED_EDGE('',*,*,#2638,.F.);+#5268=PLANE('',#5269);+#5269=AXIS2_PLACEMENT_3D('',#2635,#1322,#431);+#5270=ADVANCED_FACE('',(#5271),#5278,.F.);+#5271=FACE_BOUND('',#5272,.F.);+#5272=EDGE_LOOP('',(#5273,#2700,#5276,#5277));+#5273=ORIENTED_EDGE('',*,*,#5274,.T.);+#5274=EDGE_CURVE('',#2629,#2697,#5275,.T.);+#5275=LINE('',#2630,#492);+#5276=ORIENTED_EDGE('',*,*,#5264,.F.);+#5277=ORIENTED_EDGE('',*,*,#2633,.F.);+#5278=PLANE('',#5279);+#5279=AXIS2_PLACEMENT_3D('',#2630,#431,#13);+#5280=ADVANCED_FACE('',(#5281),#5288,.F.);+#5281=FACE_BOUND('',#5282,.F.);+#5282=EDGE_LOOP('',(#5283,#2695,#5286,#5287));+#5283=ORIENTED_EDGE('',*,*,#5284,.T.);+#5284=EDGE_CURVE('',#2622,#2690,#5285,.T.);+#5285=LINE('',#2623,#492);+#5286=ORIENTED_EDGE('',*,*,#5274,.F.);+#5287=ORIENTED_EDGE('',*,*,#2628,.F.);+#5288=PLANE('',#5289);+#5289=AXIS2_PLACEMENT_3D('',#2623,#13,#481);+#5290=ADVANCED_FACE('',(#5291),#5298,.T.);+#5291=FACE_BOUND('',#5292,.F.);+#5292=EDGE_LOOP('',(#5293,#2688,#5296,#5297));+#5293=ORIENTED_EDGE('',*,*,#5294,.T.);+#5294=EDGE_CURVE('',#2617,#2685,#5295,.T.);+#5295=LINE('',#2618,#492);+#5296=ORIENTED_EDGE('',*,*,#5284,.F.);+#5297=ORIENTED_EDGE('',*,*,#2621,.F.);+#5298=CYLINDRICAL_SURFACE('',#5299,0.3);+#5299=AXIS2_PLACEMENT_3D('',#2626,#1692,#1632);+#5300=ADVANCED_FACE('',(#5301),#5306,.F.);+#5301=FACE_BOUND('',#5302,.F.);+#5302=EDGE_LOOP('',(#5303,#2683,#5304,#5305));+#5303=ORIENTED_EDGE('',*,*,#2675,.T.);+#5304=ORIENTED_EDGE('',*,*,#5294,.F.);+#5305=ORIENTED_EDGE('',*,*,#2616,.F.);+#5306=PLANE('',#5307);+#5307=AXIS2_PLACEMENT_3D('',#2611,#4761,#1624);+#5308=ADVANCED_FACE('',(#5309),#5316,.T.);+#5309=FACE_BOUND('',#5310,.F.);+#5310=EDGE_LOOP('',(#5311,#2862,#5314,#5315));+#5311=ORIENTED_EDGE('',*,*,#5312,.T.);+#5312=EDGE_CURVE('',#2791,#2859,#5313,.T.);+#5313=LINE('',#2792,#492);+#5314=ORIENTED_EDGE('',*,*,#4503,.F.);+#5315=ORIENTED_EDGE('',*,*,#2795,.F.);+#5316=CYLINDRICAL_SURFACE('',#5317,0.3);+#5317=AXIS2_PLACEMENT_3D('',#2755,#1692,#1669);+#5318=ADVANCED_FACE('',(#5319),#5326,.F.);+#5319=FACE_BOUND('',#5320,.F.);+#5320=EDGE_LOOP('',(#5321,#2857,#5324,#5325));+#5321=ORIENTED_EDGE('',*,*,#5322,.T.);+#5322=EDGE_CURVE('',#2785,#2853,#5323,.T.);+#5323=LINE('',#2786,#492);+#5324=ORIENTED_EDGE('',*,*,#5312,.F.);+#5325=ORIENTED_EDGE('',*,*,#2790,.F.);+#5326=PLANE('',#5327);+#5327=AXIS2_PLACEMENT_3D('',#2786,#4702,#1662);+#5328=ADVANCED_FACE('',(#5329),#5336,.F.);+#5329=FACE_BOUND('',#5330,.F.);+#5330=EDGE_LOOP('',(#5331,#2851,#5334,#5335));+#5331=ORIENTED_EDGE('',*,*,#5332,.T.);+#5332=EDGE_CURVE('',#2780,#2848,#5333,.T.);+#5333=LINE('',#2781,#492);+#5334=ORIENTED_EDGE('',*,*,#5322,.F.);+#5335=ORIENTED_EDGE('',*,*,#2784,.F.);+#5336=CYLINDRICAL_SURFACE('',#5337,1.E-01);+#5337=AXIS2_PLACEMENT_3D('',#2767,#1692,#1655);+#5338=ADVANCED_FACE('',(#5339),#5346,.F.);+#5339=FACE_BOUND('',#5340,.F.);+#5340=EDGE_LOOP('',(#5341,#2846,#5344,#5345));+#5341=ORIENTED_EDGE('',*,*,#5342,.T.);+#5342=EDGE_CURVE('',#2775,#2843,#5343,.T.);+#5343=LINE('',#2776,#492);+#5344=ORIENTED_EDGE('',*,*,#5332,.F.);+#5345=ORIENTED_EDGE('',*,*,#2779,.F.);+#5346=PLANE('',#5347);+#5347=AXIS2_PLACEMENT_3D('',#2776,#1322,#431);+#5348=ADVANCED_FACE('',(#5349),#5356,.F.);+#5349=FACE_BOUND('',#5350,.F.);+#5350=EDGE_LOOP('',(#5351,#2841,#5354,#5355));+#5351=ORIENTED_EDGE('',*,*,#5352,.T.);+#5352=EDGE_CURVE('',#2770,#2838,#5353,.T.);+#5353=LINE('',#2771,#492);+#5354=ORIENTED_EDGE('',*,*,#5342,.F.);+#5355=ORIENTED_EDGE('',*,*,#2774,.F.);+#5356=PLANE('',#5357);+#5357=AXIS2_PLACEMENT_3D('',#2771,#431,#13);+#5358=ADVANCED_FACE('',(#5359),#5366,.F.);+#5359=FACE_BOUND('',#5360,.F.);+#5360=EDGE_LOOP('',(#5361,#2836,#5364,#5365));+#5361=ORIENTED_EDGE('',*,*,#5362,.T.);+#5362=EDGE_CURVE('',#2763,#2831,#5363,.T.);+#5363=LINE('',#2764,#492);+#5364=ORIENTED_EDGE('',*,*,#5352,.F.);+#5365=ORIENTED_EDGE('',*,*,#2769,.F.);+#5366=PLANE('',#5367);+#5367=AXIS2_PLACEMENT_3D('',#2764,#13,#481);+#5368=ADVANCED_FACE('',(#5369),#5376,.T.);+#5369=FACE_BOUND('',#5370,.F.);+#5370=EDGE_LOOP('',(#5371,#2829,#5374,#5375));+#5371=ORIENTED_EDGE('',*,*,#5372,.T.);+#5372=EDGE_CURVE('',#2758,#2826,#5373,.T.);+#5373=LINE('',#2759,#492);+#5374=ORIENTED_EDGE('',*,*,#5362,.F.);+#5375=ORIENTED_EDGE('',*,*,#2762,.F.);+#5376=CYLINDRICAL_SURFACE('',#5377,0.3);+#5377=AXIS2_PLACEMENT_3D('',#2767,#1692,#1632);+#5378=ADVANCED_FACE('',(#5379),#5384,.F.);+#5379=FACE_BOUND('',#5380,.F.);+#5380=EDGE_LOOP('',(#5381,#2824,#5382,#5383));+#5381=ORIENTED_EDGE('',*,*,#2816,.T.);+#5382=ORIENTED_EDGE('',*,*,#5372,.F.);+#5383=ORIENTED_EDGE('',*,*,#2757,.F.);+#5384=PLANE('',#5385);+#5385=AXIS2_PLACEMENT_3D('',#2752,#4761,#1624);+#5386=ADVANCED_FACE('',(#5387),#5394,.F.);+#5387=FACE_BOUND('',#5388,.F.);+#5388=EDGE_LOOP('',(#5389,#2993,#5392,#5393));+#5389=ORIENTED_EDGE('',*,*,#5390,.T.);+#5390=EDGE_CURVE('',#2923,#2989,#5391,.T.);+#5391=LINE('',#2924,#492);+#5392=ORIENTED_EDGE('',*,*,#4396,.F.);+#5393=ORIENTED_EDGE('',*,*,#2928,.F.);+#5394=PLANE('',#5395);+#5395=AXIS2_PLACEMENT_3D('',#2924,#4702,#1662);+#5396=ADVANCED_FACE('',(#5397),#5404,.F.);+#5397=FACE_BOUND('',#5398,.F.);+#5398=EDGE_LOOP('',(#5399,#2987,#5402,#5403));+#5399=ORIENTED_EDGE('',*,*,#5400,.T.);+#5400=EDGE_CURVE('',#2918,#2984,#5401,.T.);+#5401=LINE('',#2919,#492);+#5402=ORIENTED_EDGE('',*,*,#5390,.F.);+#5403=ORIENTED_EDGE('',*,*,#2922,.F.);+#5404=CYLINDRICAL_SURFACE('',#5405,1.E-01);+#5405=AXIS2_PLACEMENT_3D('',#2905,#1692,#1655);+#5406=ADVANCED_FACE('',(#5407),#5414,.F.);+#5407=FACE_BOUND('',#5408,.F.);+#5408=EDGE_LOOP('',(#5409,#2982,#5412,#5413));+#5409=ORIENTED_EDGE('',*,*,#5410,.T.);+#5410=EDGE_CURVE('',#2913,#2979,#5411,.T.);+#5411=LINE('',#2914,#492);+#5412=ORIENTED_EDGE('',*,*,#5400,.F.);+#5413=ORIENTED_EDGE('',*,*,#2917,.F.);+#5414=PLANE('',#5415);+#5415=AXIS2_PLACEMENT_3D('',#2914,#1322,#431);+#5416=ADVANCED_FACE('',(#5417),#5424,.F.);+#5417=FACE_BOUND('',#5418,.F.);+#5418=EDGE_LOOP('',(#5419,#2977,#5422,#5423));+#5419=ORIENTED_EDGE('',*,*,#5420,.T.);+#5420=EDGE_CURVE('',#2908,#2974,#5421,.T.);+#5421=LINE('',#2909,#492);+#5422=ORIENTED_EDGE('',*,*,#5410,.F.);+#5423=ORIENTED_EDGE('',*,*,#2912,.F.);+#5424=PLANE('',#5425);+#5425=AXIS2_PLACEMENT_3D('',#2909,#431,#13);+#5426=ADVANCED_FACE('',(#5427),#5434,.F.);+#5427=FACE_BOUND('',#5428,.F.);+#5428=EDGE_LOOP('',(#5429,#2972,#5432,#5433));+#5429=ORIENTED_EDGE('',*,*,#5430,.T.);+#5430=EDGE_CURVE('',#2901,#2967,#5431,.T.);+#5431=LINE('',#2902,#492);+#5432=ORIENTED_EDGE('',*,*,#5420,.F.);+#5433=ORIENTED_EDGE('',*,*,#2907,.F.);+#5434=PLANE('',#5435);+#5435=AXIS2_PLACEMENT_3D('',#2902,#13,#481);+#5436=ADVANCED_FACE('',(#5437),#5444,.T.);+#5437=FACE_BOUND('',#5438,.F.);+#5438=EDGE_LOOP('',(#5439,#2965,#5442,#5443));+#5439=ORIENTED_EDGE('',*,*,#5440,.T.);+#5440=EDGE_CURVE('',#2896,#2962,#5441,.T.);+#5441=LINE('',#2897,#492);+#5442=ORIENTED_EDGE('',*,*,#5430,.F.);+#5443=ORIENTED_EDGE('',*,*,#2900,.F.);+#5444=CYLINDRICAL_SURFACE('',#5445,0.3);+#5445=AXIS2_PLACEMENT_3D('',#2905,#1692,#1632);+#5446=ADVANCED_FACE('',(#5447),#5452,.F.);+#5447=FACE_BOUND('',#5448,.F.);+#5448=EDGE_LOOP('',(#5449,#2960,#5450,#5451));+#5449=ORIENTED_EDGE('',*,*,#2952,.T.);+#5450=ORIENTED_EDGE('',*,*,#5440,.F.);+#5451=ORIENTED_EDGE('',*,*,#2895,.F.);+#5452=PLANE('',#5453);+#5453=AXIS2_PLACEMENT_3D('',#2890,#4761,#1624);+#5454=ADVANCED_FACE('',(#5455),#5462,.F.);+#5455=FACE_BOUND('',#5456,.F.);+#5456=EDGE_LOOP('',(#5457,#3123,#5460,#5461));+#5457=ORIENTED_EDGE('',*,*,#5458,.T.);+#5458=EDGE_CURVE('',#3050,#3119,#5459,.T.);+#5459=LINE('',#3051,#58);+#5460=ORIENTED_EDGE('',*,*,#4669,.F.);+#5461=ORIENTED_EDGE('',*,*,#3056,.F.);+#5462=PLANE('',#5463);+#5463=AXIS2_PLACEMENT_3D('',#3051,#5464,#3061);+#5464=DIRECTION('',(-0.985787519508,-1.094444001546E-16,-0.167996923731));+#5465=ADVANCED_FACE('',(#5466),#5473,.F.);+#5466=FACE_BOUND('',#5467,.F.);+#5467=EDGE_LOOP('',(#5468,#3117,#5471,#5472));+#5468=ORIENTED_EDGE('',*,*,#5469,.T.);+#5469=EDGE_CURVE('',#3045,#3114,#5470,.T.);+#5470=LINE('',#3046,#58);+#5471=ORIENTED_EDGE('',*,*,#5458,.F.);+#5472=ORIENTED_EDGE('',*,*,#3049,.F.);+#5473=CYLINDRICAL_SURFACE('',#3053,1.E-01);+#5474=ADVANCED_FACE('',(#5475),#5482,.F.);+#5475=FACE_BOUND('',#5476,.F.);+#5476=EDGE_LOOP('',(#5477,#3112,#5480,#5481));+#5477=ORIENTED_EDGE('',*,*,#5478,.T.);+#5478=EDGE_CURVE('',#3040,#3109,#5479,.T.);+#5479=LINE('',#3041,#58);+#5480=ORIENTED_EDGE('',*,*,#5469,.F.);+#5481=ORIENTED_EDGE('',*,*,#3044,.F.);+#5482=PLANE('',#5483);+#5483=AXIS2_PLACEMENT_3D('',#3041,#1322,#73);+#5484=ADVANCED_FACE('',(#5485),#5492,.F.);+#5485=FACE_BOUND('',#5486,.F.);+#5486=EDGE_LOOP('',(#5487,#3107,#5490,#5491));+#5487=ORIENTED_EDGE('',*,*,#5488,.T.);+#5488=EDGE_CURVE('',#3035,#3104,#5489,.T.);+#5489=LINE('',#3036,#58);+#5490=ORIENTED_EDGE('',*,*,#5478,.F.);+#5491=ORIENTED_EDGE('',*,*,#3039,.F.);+#5492=PLANE('',#5493);+#5493=AXIS2_PLACEMENT_3D('',#3036,#73,#13);+#5494=ADVANCED_FACE('',(#5495),#5502,.F.);+#5495=FACE_BOUND('',#5496,.F.);+#5496=EDGE_LOOP('',(#5497,#3102,#5500,#5501));+#5497=ORIENTED_EDGE('',*,*,#5498,.T.);+#5498=EDGE_CURVE('',#3027,#3097,#5499,.T.);+#5499=LINE('',#3028,#58);+#5500=ORIENTED_EDGE('',*,*,#5488,.F.);+#5501=ORIENTED_EDGE('',*,*,#3034,.F.);+#5502=PLANE('',#5503);+#5503=AXIS2_PLACEMENT_3D('',#3028,#13,#28);+#5504=ADVANCED_FACE('',(#5505),#5512,.T.);+#5505=FACE_BOUND('',#5506,.F.);+#5506=EDGE_LOOP('',(#5507,#3095,#5510,#5511));+#5507=ORIENTED_EDGE('',*,*,#5508,.T.);+#5508=EDGE_CURVE('',#3020,#3092,#5509,.T.);+#5509=LINE('',#3021,#58);+#5510=ORIENTED_EDGE('',*,*,#5498,.F.);+#5511=ORIENTED_EDGE('',*,*,#3026,.F.);+#5512=CYLINDRICAL_SURFACE('',#5513,0.3);+#5513=AXIS2_PLACEMENT_3D('',#3031,#87,#3032);+#5514=ADVANCED_FACE('',(#5515),#5520,.F.);+#5515=FACE_BOUND('',#5516,.F.);+#5516=EDGE_LOOP('',(#5517,#3090,#5518,#5519));+#5517=ORIENTED_EDGE('',*,*,#3083,.T.);+#5518=ORIENTED_EDGE('',*,*,#5508,.F.);+#5519=ORIENTED_EDGE('',*,*,#3019,.F.);+#5520=PLANE('',#5521);+#5521=AXIS2_PLACEMENT_3D('',#3013,#5522,#3024);+#5522=DIRECTION('',(0.985787519508,1.094444001546E-16,0.167996923731));+#5523=ADVANCED_FACE('',(#5524),#5531,.T.);+#5524=FACE_BOUND('',#5525,.F.);+#5525=EDGE_LOOP('',(#5526,#3262,#5529,#5530));+#5526=ORIENTED_EDGE('',*,*,#5527,.T.);+#5527=EDGE_CURVE('',#3192,#3259,#5528,.T.);+#5528=LINE('',#3193,#58);+#5529=ORIENTED_EDGE('',*,*,#4553,.F.);+#5530=ORIENTED_EDGE('',*,*,#3196,.F.);+#5531=CYLINDRICAL_SURFACE('',#5532,0.3);+#5532=AXIS2_PLACEMENT_3D('',#3156,#87,#3066);+#5533=ADVANCED_FACE('',(#5534),#5541,.F.);+#5534=FACE_BOUND('',#5535,.F.);+#5535=EDGE_LOOP('',(#5536,#3257,#5539,#5540));+#5536=ORIENTED_EDGE('',*,*,#5537,.T.);+#5537=EDGE_CURVE('',#3186,#3253,#5538,.T.);+#5538=LINE('',#3187,#58);+#5539=ORIENTED_EDGE('',*,*,#5527,.F.);+#5540=ORIENTED_EDGE('',*,*,#3191,.F.);+#5541=PLANE('',#5542);+#5542=AXIS2_PLACEMENT_3D('',#3187,#5464,#3061);+#5543=ADVANCED_FACE('',(#5544),#5551,.F.);+#5544=FACE_BOUND('',#5545,.F.);+#5545=EDGE_LOOP('',(#5546,#3251,#5549,#5550));+#5546=ORIENTED_EDGE('',*,*,#5547,.T.);+#5547=EDGE_CURVE('',#3181,#3248,#5548,.T.);+#5548=LINE('',#3182,#58);+#5549=ORIENTED_EDGE('',*,*,#5537,.F.);+#5550=ORIENTED_EDGE('',*,*,#3185,.F.);+#5551=CYLINDRICAL_SURFACE('',#3189,1.E-01);+#5552=ADVANCED_FACE('',(#5553),#5560,.F.);+#5553=FACE_BOUND('',#5554,.F.);+#5554=EDGE_LOOP('',(#5555,#3246,#5558,#5559));+#5555=ORIENTED_EDGE('',*,*,#5556,.T.);+#5556=EDGE_CURVE('',#3176,#3243,#5557,.T.);+#5557=LINE('',#3177,#58);+#5558=ORIENTED_EDGE('',*,*,#5547,.F.);+#5559=ORIENTED_EDGE('',*,*,#3180,.F.);+#5560=PLANE('',#5561);+#5561=AXIS2_PLACEMENT_3D('',#3177,#1322,#73);+#5562=ADVANCED_FACE('',(#5563),#5570,.F.);+#5563=FACE_BOUND('',#5564,.F.);+#5564=EDGE_LOOP('',(#5565,#3241,#5568,#5569));+#5565=ORIENTED_EDGE('',*,*,#5566,.T.);+#5566=EDGE_CURVE('',#3171,#3238,#5567,.T.);+#5567=LINE('',#3172,#58);+#5568=ORIENTED_EDGE('',*,*,#5556,.F.);+#5569=ORIENTED_EDGE('',*,*,#3175,.F.);+#5570=PLANE('',#5571);+#5571=AXIS2_PLACEMENT_3D('',#3172,#73,#13);+#5572=ADVANCED_FACE('',(#5573),#5580,.F.);+#5573=FACE_BOUND('',#5574,.F.);+#5574=EDGE_LOOP('',(#5575,#3236,#5578,#5579));+#5575=ORIENTED_EDGE('',*,*,#5576,.T.);+#5576=EDGE_CURVE('',#3164,#3231,#5577,.T.);+#5577=LINE('',#3165,#58);+#5578=ORIENTED_EDGE('',*,*,#5566,.F.);+#5579=ORIENTED_EDGE('',*,*,#3170,.F.);+#5580=PLANE('',#5581);+#5581=AXIS2_PLACEMENT_3D('',#3165,#13,#28);+#5582=ADVANCED_FACE('',(#5583),#5590,.T.);+#5583=FACE_BOUND('',#5584,.F.);+#5584=EDGE_LOOP('',(#5585,#3229,#5588,#5589));+#5585=ORIENTED_EDGE('',*,*,#5586,.T.);+#5586=EDGE_CURVE('',#3159,#3226,#5587,.T.);+#5587=LINE('',#3160,#58);+#5588=ORIENTED_EDGE('',*,*,#5576,.F.);+#5589=ORIENTED_EDGE('',*,*,#3163,.F.);+#5590=CYLINDRICAL_SURFACE('',#5591,0.3);+#5591=AXIS2_PLACEMENT_3D('',#3168,#87,#3032);+#5592=ADVANCED_FACE('',(#5593),#5598,.F.);+#5593=FACE_BOUND('',#5594,.F.);+#5594=EDGE_LOOP('',(#5595,#3224,#5596,#5597));+#5595=ORIENTED_EDGE('',*,*,#3217,.T.);+#5596=ORIENTED_EDGE('',*,*,#5586,.F.);+#5597=ORIENTED_EDGE('',*,*,#3158,.F.);+#5598=PLANE('',#5599);+#5599=AXIS2_PLACEMENT_3D('',#3153,#5522,#3024);+#5600=ADVANCED_FACE('',(#5601),#5608,.T.);+#5601=FACE_BOUND('',#5602,.F.);+#5602=EDGE_LOOP('',(#5603,#3402,#5606,#5607));+#5603=ORIENTED_EDGE('',*,*,#5604,.T.);+#5604=EDGE_CURVE('',#3332,#3399,#5605,.T.);+#5605=LINE('',#3333,#58);+#5606=ORIENTED_EDGE('',*,*,#4565,.F.);+#5607=ORIENTED_EDGE('',*,*,#3336,.F.);+#5608=CYLINDRICAL_SURFACE('',#5609,0.3);+#5609=AXIS2_PLACEMENT_3D('',#3296,#87,#3066);+#5610=ADVANCED_FACE('',(#5611),#5618,.F.);+#5611=FACE_BOUND('',#5612,.F.);+#5612=EDGE_LOOP('',(#5613,#3397,#5616,#5617));+#5613=ORIENTED_EDGE('',*,*,#5614,.T.);+#5614=EDGE_CURVE('',#3326,#3393,#5615,.T.);+#5615=LINE('',#3327,#58);+#5616=ORIENTED_EDGE('',*,*,#5604,.F.);+#5617=ORIENTED_EDGE('',*,*,#3331,.F.);+#5618=PLANE('',#5619);+#5619=AXIS2_PLACEMENT_3D('',#3327,#5464,#3061);+#5620=ADVANCED_FACE('',(#5621),#5628,.F.);+#5621=FACE_BOUND('',#5622,.F.);+#5622=EDGE_LOOP('',(#5623,#3391,#5626,#5627));+#5623=ORIENTED_EDGE('',*,*,#5624,.T.);+#5624=EDGE_CURVE('',#3321,#3388,#5625,.T.);+#5625=LINE('',#3322,#58);+#5626=ORIENTED_EDGE('',*,*,#5614,.F.);+#5627=ORIENTED_EDGE('',*,*,#3325,.F.);+#5628=CYLINDRICAL_SURFACE('',#3329,1.E-01);+#5629=ADVANCED_FACE('',(#5630),#5637,.F.);+#5630=FACE_BOUND('',#5631,.F.);+#5631=EDGE_LOOP('',(#5632,#3386,#5635,#5636));+#5632=ORIENTED_EDGE('',*,*,#5633,.T.);+#5633=EDGE_CURVE('',#3316,#3383,#5634,.T.);+#5634=LINE('',#3317,#58);+#5635=ORIENTED_EDGE('',*,*,#5624,.F.);+#5636=ORIENTED_EDGE('',*,*,#3320,.F.);+#5637=PLANE('',#5638);+#5638=AXIS2_PLACEMENT_3D('',#3317,#1322,#73);+#5639=ADVANCED_FACE('',(#5640),#5647,.F.);+#5640=FACE_BOUND('',#5641,.F.);+#5641=EDGE_LOOP('',(#5642,#3381,#5645,#5646));+#5642=ORIENTED_EDGE('',*,*,#5643,.T.);+#5643=EDGE_CURVE('',#3311,#3378,#5644,.T.);+#5644=LINE('',#3312,#58);+#5645=ORIENTED_EDGE('',*,*,#5633,.F.);+#5646=ORIENTED_EDGE('',*,*,#3315,.F.);+#5647=PLANE('',#5648);+#5648=AXIS2_PLACEMENT_3D('',#3312,#73,#13);+#5649=ADVANCED_FACE('',(#5650),#5657,.F.);+#5650=FACE_BOUND('',#5651,.F.);+#5651=EDGE_LOOP('',(#5652,#3376,#5655,#5656));+#5652=ORIENTED_EDGE('',*,*,#5653,.T.);+#5653=EDGE_CURVE('',#3304,#3371,#5654,.T.);+#5654=LINE('',#3305,#58);+#5655=ORIENTED_EDGE('',*,*,#5643,.F.);+#5656=ORIENTED_EDGE('',*,*,#3310,.F.);+#5657=PLANE('',#5658);+#5658=AXIS2_PLACEMENT_3D('',#3305,#13,#28);+#5659=ADVANCED_FACE('',(#5660),#5667,.T.);+#5660=FACE_BOUND('',#5661,.F.);+#5661=EDGE_LOOP('',(#5662,#3369,#5665,#5666));+#5662=ORIENTED_EDGE('',*,*,#5663,.T.);+#5663=EDGE_CURVE('',#3299,#3366,#5664,.T.);+#5664=LINE('',#3300,#58);+#5665=ORIENTED_EDGE('',*,*,#5653,.F.);+#5666=ORIENTED_EDGE('',*,*,#3303,.F.);+#5667=CYLINDRICAL_SURFACE('',#5668,0.3);+#5668=AXIS2_PLACEMENT_3D('',#3308,#87,#3032);+#5669=ADVANCED_FACE('',(#5670),#5675,.F.);+#5670=FACE_BOUND('',#5671,.F.);+#5671=EDGE_LOOP('',(#5672,#3364,#5673,#5674));+#5672=ORIENTED_EDGE('',*,*,#3357,.T.);+#5673=ORIENTED_EDGE('',*,*,#5663,.F.);+#5674=ORIENTED_EDGE('',*,*,#3298,.F.);+#5675=PLANE('',#5676);+#5676=AXIS2_PLACEMENT_3D('',#3293,#5522,#3024);+#5677=ADVANCED_FACE('',(#5678),#5685,.T.);+#5678=FACE_BOUND('',#5679,.F.);+#5679=EDGE_LOOP('',(#5680,#3542,#5683,#5684));+#5680=ORIENTED_EDGE('',*,*,#5681,.T.);+#5681=EDGE_CURVE('',#3472,#3539,#5682,.T.);+#5682=LINE('',#3473,#58);+#5683=ORIENTED_EDGE('',*,*,#4577,.F.);+#5684=ORIENTED_EDGE('',*,*,#3476,.F.);+#5685=CYLINDRICAL_SURFACE('',#5686,0.3);+#5686=AXIS2_PLACEMENT_3D('',#3436,#87,#3066);+#5687=ADVANCED_FACE('',(#5688),#5695,.F.);+#5688=FACE_BOUND('',#5689,.F.);+#5689=EDGE_LOOP('',(#5690,#3537,#5693,#5694));+#5690=ORIENTED_EDGE('',*,*,#5691,.T.);+#5691=EDGE_CURVE('',#3466,#3533,#5692,.T.);+#5692=LINE('',#3467,#58);+#5693=ORIENTED_EDGE('',*,*,#5681,.F.);+#5694=ORIENTED_EDGE('',*,*,#3471,.F.);+#5695=PLANE('',#5696);+#5696=AXIS2_PLACEMENT_3D('',#3467,#5464,#3061);+#5697=ADVANCED_FACE('',(#5698),#5705,.F.);+#5698=FACE_BOUND('',#5699,.F.);+#5699=EDGE_LOOP('',(#5700,#3531,#5703,#5704));+#5700=ORIENTED_EDGE('',*,*,#5701,.T.);+#5701=EDGE_CURVE('',#3461,#3528,#5702,.T.);+#5702=LINE('',#3462,#58);+#5703=ORIENTED_EDGE('',*,*,#5691,.F.);+#5704=ORIENTED_EDGE('',*,*,#3465,.F.);+#5705=CYLINDRICAL_SURFACE('',#3469,1.E-01);+#5706=ADVANCED_FACE('',(#5707),#5714,.F.);+#5707=FACE_BOUND('',#5708,.F.);+#5708=EDGE_LOOP('',(#5709,#3526,#5712,#5713));+#5709=ORIENTED_EDGE('',*,*,#5710,.T.);+#5710=EDGE_CURVE('',#3456,#3523,#5711,.T.);+#5711=LINE('',#3457,#58);+#5712=ORIENTED_EDGE('',*,*,#5701,.F.);+#5713=ORIENTED_EDGE('',*,*,#3460,.F.);+#5714=PLANE('',#5715);+#5715=AXIS2_PLACEMENT_3D('',#3457,#1322,#73);+#5716=ADVANCED_FACE('',(#5717),#5724,.F.);+#5717=FACE_BOUND('',#5718,.F.);+#5718=EDGE_LOOP('',(#5719,#3521,#5722,#5723));+#5719=ORIENTED_EDGE('',*,*,#5720,.T.);+#5720=EDGE_CURVE('',#3451,#3518,#5721,.T.);+#5721=LINE('',#3452,#58);+#5722=ORIENTED_EDGE('',*,*,#5710,.F.);+#5723=ORIENTED_EDGE('',*,*,#3455,.F.);+#5724=PLANE('',#5725);+#5725=AXIS2_PLACEMENT_3D('',#3452,#73,#13);+#5726=ADVANCED_FACE('',(#5727),#5734,.F.);+#5727=FACE_BOUND('',#5728,.F.);+#5728=EDGE_LOOP('',(#5729,#3516,#5732,#5733));+#5729=ORIENTED_EDGE('',*,*,#5730,.T.);+#5730=EDGE_CURVE('',#3444,#3511,#5731,.T.);+#5731=LINE('',#3445,#58);+#5732=ORIENTED_EDGE('',*,*,#5720,.F.);+#5733=ORIENTED_EDGE('',*,*,#3450,.F.);+#5734=PLANE('',#5735);+#5735=AXIS2_PLACEMENT_3D('',#3445,#13,#28);+#5736=ADVANCED_FACE('',(#5737),#5744,.T.);+#5737=FACE_BOUND('',#5738,.F.);+#5738=EDGE_LOOP('',(#5739,#3509,#5742,#5743));+#5739=ORIENTED_EDGE('',*,*,#5740,.T.);+#5740=EDGE_CURVE('',#3439,#3506,#5741,.T.);+#5741=LINE('',#3440,#58);+#5742=ORIENTED_EDGE('',*,*,#5730,.F.);+#5743=ORIENTED_EDGE('',*,*,#3443,.F.);+#5744=CYLINDRICAL_SURFACE('',#5745,0.3);+#5745=AXIS2_PLACEMENT_3D('',#3448,#87,#3032);+#5746=ADVANCED_FACE('',(#5747),#5752,.F.);+#5747=FACE_BOUND('',#5748,.F.);+#5748=EDGE_LOOP('',(#5749,#3504,#5750,#5751));+#5749=ORIENTED_EDGE('',*,*,#3497,.T.);+#5750=ORIENTED_EDGE('',*,*,#5740,.F.);+#5751=ORIENTED_EDGE('',*,*,#3438,.F.);+#5752=PLANE('',#5753);+#5753=AXIS2_PLACEMENT_3D('',#3433,#5522,#3024);+#5754=ADVANCED_FACE('',(#5755),#5762,.T.);+#5755=FACE_BOUND('',#5756,.F.);+#5756=EDGE_LOOP('',(#5757,#3682,#5760,#5761));+#5757=ORIENTED_EDGE('',*,*,#5758,.T.);+#5758=EDGE_CURVE('',#3612,#3679,#5759,.T.);+#5759=LINE('',#3613,#58);+#5760=ORIENTED_EDGE('',*,*,#4589,.F.);+#5761=ORIENTED_EDGE('',*,*,#3616,.F.);+#5762=CYLINDRICAL_SURFACE('',#5763,0.3);+#5763=AXIS2_PLACEMENT_3D('',#3576,#87,#3066);+#5764=ADVANCED_FACE('',(#5765),#5772,.F.);+#5765=FACE_BOUND('',#5766,.F.);+#5766=EDGE_LOOP('',(#5767,#3677,#5770,#5771));+#5767=ORIENTED_EDGE('',*,*,#5768,.T.);+#5768=EDGE_CURVE('',#3606,#3673,#5769,.T.);+#5769=LINE('',#3607,#58);+#5770=ORIENTED_EDGE('',*,*,#5758,.F.);+#5771=ORIENTED_EDGE('',*,*,#3611,.F.);+#5772=PLANE('',#5773);+#5773=AXIS2_PLACEMENT_3D('',#3607,#5464,#3061);+#5774=ADVANCED_FACE('',(#5775),#5782,.F.);+#5775=FACE_BOUND('',#5776,.F.);+#5776=EDGE_LOOP('',(#5777,#3671,#5780,#5781));+#5777=ORIENTED_EDGE('',*,*,#5778,.T.);+#5778=EDGE_CURVE('',#3601,#3668,#5779,.T.);+#5779=LINE('',#3602,#58);+#5780=ORIENTED_EDGE('',*,*,#5768,.F.);+#5781=ORIENTED_EDGE('',*,*,#3605,.F.);+#5782=CYLINDRICAL_SURFACE('',#3609,1.E-01);+#5783=ADVANCED_FACE('',(#5784),#5791,.F.);+#5784=FACE_BOUND('',#5785,.F.);+#5785=EDGE_LOOP('',(#5786,#3666,#5789,#5790));+#5786=ORIENTED_EDGE('',*,*,#5787,.T.);+#5787=EDGE_CURVE('',#3596,#3663,#5788,.T.);+#5788=LINE('',#3597,#58);+#5789=ORIENTED_EDGE('',*,*,#5778,.F.);+#5790=ORIENTED_EDGE('',*,*,#3600,.F.);+#5791=PLANE('',#5792);+#5792=AXIS2_PLACEMENT_3D('',#3597,#1322,#73);+#5793=ADVANCED_FACE('',(#5794),#5801,.F.);+#5794=FACE_BOUND('',#5795,.F.);+#5795=EDGE_LOOP('',(#5796,#3661,#5799,#5800));+#5796=ORIENTED_EDGE('',*,*,#5797,.T.);+#5797=EDGE_CURVE('',#3591,#3658,#5798,.T.);+#5798=LINE('',#3592,#58);+#5799=ORIENTED_EDGE('',*,*,#5787,.F.);+#5800=ORIENTED_EDGE('',*,*,#3595,.F.);+#5801=PLANE('',#5802);+#5802=AXIS2_PLACEMENT_3D('',#3592,#73,#13);+#5803=ADVANCED_FACE('',(#5804),#5811,.F.);+#5804=FACE_BOUND('',#5805,.F.);+#5805=EDGE_LOOP('',(#5806,#3656,#5809,#5810));+#5806=ORIENTED_EDGE('',*,*,#5807,.T.);+#5807=EDGE_CURVE('',#3584,#3651,#5808,.T.);+#5808=LINE('',#3585,#58);+#5809=ORIENTED_EDGE('',*,*,#5797,.F.);+#5810=ORIENTED_EDGE('',*,*,#3590,.F.);+#5811=PLANE('',#5812);+#5812=AXIS2_PLACEMENT_3D('',#3585,#13,#28);+#5813=ADVANCED_FACE('',(#5814),#5821,.T.);+#5814=FACE_BOUND('',#5815,.F.);+#5815=EDGE_LOOP('',(#5816,#3649,#5819,#5820));+#5816=ORIENTED_EDGE('',*,*,#5817,.T.);+#5817=EDGE_CURVE('',#3579,#3646,#5818,.T.);+#5818=LINE('',#3580,#58);+#5819=ORIENTED_EDGE('',*,*,#5807,.F.);+#5820=ORIENTED_EDGE('',*,*,#3583,.F.);+#5821=CYLINDRICAL_SURFACE('',#5822,0.3);+#5822=AXIS2_PLACEMENT_3D('',#3588,#87,#3032);+#5823=ADVANCED_FACE('',(#5824),#5829,.F.);+#5824=FACE_BOUND('',#5825,.F.);+#5825=EDGE_LOOP('',(#5826,#3644,#5827,#5828));+#5826=ORIENTED_EDGE('',*,*,#3637,.T.);+#5827=ORIENTED_EDGE('',*,*,#5817,.F.);+#5828=ORIENTED_EDGE('',*,*,#3578,.F.);+#5829=PLANE('',#5830);+#5830=AXIS2_PLACEMENT_3D('',#3573,#5522,#3024);+#5831=ADVANCED_FACE('',(#5832),#5839,.T.);+#5832=FACE_BOUND('',#5833,.F.);+#5833=EDGE_LOOP('',(#5834,#3822,#5837,#5838));+#5834=ORIENTED_EDGE('',*,*,#5835,.T.);+#5835=EDGE_CURVE('',#3752,#3819,#5836,.T.);+#5836=LINE('',#3753,#58);+#5837=ORIENTED_EDGE('',*,*,#4601,.F.);+#5838=ORIENTED_EDGE('',*,*,#3756,.F.);+#5839=CYLINDRICAL_SURFACE('',#5840,0.3);+#5840=AXIS2_PLACEMENT_3D('',#3716,#87,#3066);+#5841=ADVANCED_FACE('',(#5842),#5849,.F.);+#5842=FACE_BOUND('',#5843,.F.);+#5843=EDGE_LOOP('',(#5844,#3817,#5847,#5848));+#5844=ORIENTED_EDGE('',*,*,#5845,.T.);+#5845=EDGE_CURVE('',#3746,#3813,#5846,.T.);+#5846=LINE('',#3747,#58);+#5847=ORIENTED_EDGE('',*,*,#5835,.F.);+#5848=ORIENTED_EDGE('',*,*,#3751,.F.);+#5849=PLANE('',#5850);+#5850=AXIS2_PLACEMENT_3D('',#3747,#5464,#3061);+#5851=ADVANCED_FACE('',(#5852),#5859,.F.);+#5852=FACE_BOUND('',#5853,.F.);+#5853=EDGE_LOOP('',(#5854,#3811,#5857,#5858));+#5854=ORIENTED_EDGE('',*,*,#5855,.T.);+#5855=EDGE_CURVE('',#3741,#3808,#5856,.T.);+#5856=LINE('',#3742,#58);+#5857=ORIENTED_EDGE('',*,*,#5845,.F.);+#5858=ORIENTED_EDGE('',*,*,#3745,.F.);+#5859=CYLINDRICAL_SURFACE('',#3749,1.E-01);+#5860=ADVANCED_FACE('',(#5861),#5868,.F.);+#5861=FACE_BOUND('',#5862,.F.);+#5862=EDGE_LOOP('',(#5863,#3806,#5866,#5867));+#5863=ORIENTED_EDGE('',*,*,#5864,.T.);+#5864=EDGE_CURVE('',#3736,#3803,#5865,.T.);+#5865=LINE('',#3737,#58);+#5866=ORIENTED_EDGE('',*,*,#5855,.F.);+#5867=ORIENTED_EDGE('',*,*,#3740,.F.);+#5868=PLANE('',#5869);+#5869=AXIS2_PLACEMENT_3D('',#3737,#1322,#73);+#5870=ADVANCED_FACE('',(#5871),#5878,.F.);+#5871=FACE_BOUND('',#5872,.F.);+#5872=EDGE_LOOP('',(#5873,#3801,#5876,#5877));+#5873=ORIENTED_EDGE('',*,*,#5874,.T.);+#5874=EDGE_CURVE('',#3731,#3798,#5875,.T.);+#5875=LINE('',#3732,#58);+#5876=ORIENTED_EDGE('',*,*,#5864,.F.);+#5877=ORIENTED_EDGE('',*,*,#3735,.F.);+#5878=PLANE('',#5879);+#5879=AXIS2_PLACEMENT_3D('',#3732,#73,#13);+#5880=ADVANCED_FACE('',(#5881),#5888,.F.);+#5881=FACE_BOUND('',#5882,.F.);+#5882=EDGE_LOOP('',(#5883,#3796,#5886,#5887));+#5883=ORIENTED_EDGE('',*,*,#5884,.T.);+#5884=EDGE_CURVE('',#3724,#3791,#5885,.T.);+#5885=LINE('',#3725,#58);+#5886=ORIENTED_EDGE('',*,*,#5874,.F.);+#5887=ORIENTED_EDGE('',*,*,#3730,.F.);+#5888=PLANE('',#5889);+#5889=AXIS2_PLACEMENT_3D('',#3725,#13,#28);+#5890=ADVANCED_FACE('',(#5891),#5898,.T.);+#5891=FACE_BOUND('',#5892,.F.);+#5892=EDGE_LOOP('',(#5893,#3789,#5896,#5897));+#5893=ORIENTED_EDGE('',*,*,#5894,.T.);+#5894=EDGE_CURVE('',#3719,#3786,#5895,.T.);+#5895=LINE('',#3720,#58);+#5896=ORIENTED_EDGE('',*,*,#5884,.F.);+#5897=ORIENTED_EDGE('',*,*,#3723,.F.);+#5898=CYLINDRICAL_SURFACE('',#5899,0.3);+#5899=AXIS2_PLACEMENT_3D('',#3728,#87,#3032);+#5900=ADVANCED_FACE('',(#5901),#5906,.F.);+#5901=FACE_BOUND('',#5902,.F.);+#5902=EDGE_LOOP('',(#5903,#3784,#5904,#5905));+#5903=ORIENTED_EDGE('',*,*,#3777,.T.);+#5904=ORIENTED_EDGE('',*,*,#5894,.F.);+#5905=ORIENTED_EDGE('',*,*,#3718,.F.);+#5906=PLANE('',#5907);+#5907=AXIS2_PLACEMENT_3D('',#3713,#5522,#3024);+#5908=ADVANCED_FACE('',(#5909),#5916,.T.);+#5909=FACE_BOUND('',#5910,.F.);+#5910=EDGE_LOOP('',(#5911,#3962,#5914,#5915));+#5911=ORIENTED_EDGE('',*,*,#5912,.T.);+#5912=EDGE_CURVE('',#3892,#3959,#5913,.T.);+#5913=LINE('',#3893,#58);+#5914=ORIENTED_EDGE('',*,*,#4613,.F.);+#5915=ORIENTED_EDGE('',*,*,#3896,.F.);+#5916=CYLINDRICAL_SURFACE('',#5917,0.3);+#5917=AXIS2_PLACEMENT_3D('',#3856,#87,#3066);+#5918=ADVANCED_FACE('',(#5919),#5926,.F.);+#5919=FACE_BOUND('',#5920,.F.);+#5920=EDGE_LOOP('',(#5921,#3957,#5924,#5925));+#5921=ORIENTED_EDGE('',*,*,#5922,.T.);+#5922=EDGE_CURVE('',#3886,#3953,#5923,.T.);+#5923=LINE('',#3887,#58);+#5924=ORIENTED_EDGE('',*,*,#5912,.F.);+#5925=ORIENTED_EDGE('',*,*,#3891,.F.);+#5926=PLANE('',#5927);+#5927=AXIS2_PLACEMENT_3D('',#3887,#5464,#3061);+#5928=ADVANCED_FACE('',(#5929),#5936,.F.);+#5929=FACE_BOUND('',#5930,.F.);+#5930=EDGE_LOOP('',(#5931,#3951,#5934,#5935));+#5931=ORIENTED_EDGE('',*,*,#5932,.T.);+#5932=EDGE_CURVE('',#3881,#3948,#5933,.T.);+#5933=LINE('',#3882,#58);+#5934=ORIENTED_EDGE('',*,*,#5922,.F.);+#5935=ORIENTED_EDGE('',*,*,#3885,.F.);+#5936=CYLINDRICAL_SURFACE('',#3889,1.E-01);+#5937=ADVANCED_FACE('',(#5938),#5945,.F.);+#5938=FACE_BOUND('',#5939,.F.);+#5939=EDGE_LOOP('',(#5940,#3946,#5943,#5944));+#5940=ORIENTED_EDGE('',*,*,#5941,.T.);+#5941=EDGE_CURVE('',#3876,#3943,#5942,.T.);+#5942=LINE('',#3877,#58);+#5943=ORIENTED_EDGE('',*,*,#5932,.F.);+#5944=ORIENTED_EDGE('',*,*,#3880,.F.);+#5945=PLANE('',#5946);+#5946=AXIS2_PLACEMENT_3D('',#3877,#1322,#73);+#5947=ADVANCED_FACE('',(#5948),#5955,.F.);+#5948=FACE_BOUND('',#5949,.F.);+#5949=EDGE_LOOP('',(#5950,#3941,#5953,#5954));+#5950=ORIENTED_EDGE('',*,*,#5951,.T.);+#5951=EDGE_CURVE('',#3871,#3938,#5952,.T.);+#5952=LINE('',#3872,#58);+#5953=ORIENTED_EDGE('',*,*,#5941,.F.);+#5954=ORIENTED_EDGE('',*,*,#3875,.F.);+#5955=PLANE('',#5956);+#5956=AXIS2_PLACEMENT_3D('',#3872,#73,#13);+#5957=ADVANCED_FACE('',(#5958),#5965,.F.);+#5958=FACE_BOUND('',#5959,.F.);+#5959=EDGE_LOOP('',(#5960,#3936,#5963,#5964));+#5960=ORIENTED_EDGE('',*,*,#5961,.T.);+#5961=EDGE_CURVE('',#3864,#3931,#5962,.T.);+#5962=LINE('',#3865,#58);+#5963=ORIENTED_EDGE('',*,*,#5951,.F.);+#5964=ORIENTED_EDGE('',*,*,#3870,.F.);+#5965=PLANE('',#5966);+#5966=AXIS2_PLACEMENT_3D('',#3865,#13,#28);+#5967=ADVANCED_FACE('',(#5968),#5975,.T.);+#5968=FACE_BOUND('',#5969,.F.);+#5969=EDGE_LOOP('',(#5970,#3929,#5973,#5974));+#5970=ORIENTED_EDGE('',*,*,#5971,.T.);+#5971=EDGE_CURVE('',#3859,#3926,#5972,.T.);+#5972=LINE('',#3860,#58);+#5973=ORIENTED_EDGE('',*,*,#5961,.F.);+#5974=ORIENTED_EDGE('',*,*,#3863,.F.);+#5975=CYLINDRICAL_SURFACE('',#5976,0.3);+#5976=AXIS2_PLACEMENT_3D('',#3868,#87,#3032);+#5977=ADVANCED_FACE('',(#5978),#5983,.F.);+#5978=FACE_BOUND('',#5979,.F.);+#5979=EDGE_LOOP('',(#5980,#3924,#5981,#5982));+#5980=ORIENTED_EDGE('',*,*,#3917,.T.);+#5981=ORIENTED_EDGE('',*,*,#5971,.F.);+#5982=ORIENTED_EDGE('',*,*,#3858,.F.);+#5983=PLANE('',#5984);+#5984=AXIS2_PLACEMENT_3D('',#3853,#5522,#3024);+#5985=ADVANCED_FACE('',(#5986),#5993,.T.);+#5986=FACE_BOUND('',#5987,.F.);+#5987=EDGE_LOOP('',(#5988,#4102,#5991,#5992));+#5988=ORIENTED_EDGE('',*,*,#5989,.T.);+#5989=EDGE_CURVE('',#4032,#4099,#5990,.T.);+#5990=LINE('',#4033,#58);+#5991=ORIENTED_EDGE('',*,*,#4625,.F.);+#5992=ORIENTED_EDGE('',*,*,#4036,.F.);+#5993=CYLINDRICAL_SURFACE('',#5994,0.3);+#5994=AXIS2_PLACEMENT_3D('',#3996,#87,#3066);+#5995=ADVANCED_FACE('',(#5996),#6003,.F.);+#5996=FACE_BOUND('',#5997,.F.);+#5997=EDGE_LOOP('',(#5998,#4097,#6001,#6002));+#5998=ORIENTED_EDGE('',*,*,#5999,.T.);+#5999=EDGE_CURVE('',#4026,#4093,#6000,.T.);+#6000=LINE('',#4027,#58);+#6001=ORIENTED_EDGE('',*,*,#5989,.F.);+#6002=ORIENTED_EDGE('',*,*,#4031,.F.);+#6003=PLANE('',#6004);+#6004=AXIS2_PLACEMENT_3D('',#4027,#5464,#3061);+#6005=ADVANCED_FACE('',(#6006),#6013,.F.);+#6006=FACE_BOUND('',#6007,.F.);+#6007=EDGE_LOOP('',(#6008,#4091,#6011,#6012));+#6008=ORIENTED_EDGE('',*,*,#6009,.T.);+#6009=EDGE_CURVE('',#4021,#4088,#6010,.T.);+#6010=LINE('',#4022,#58);+#6011=ORIENTED_EDGE('',*,*,#5999,.F.);+#6012=ORIENTED_EDGE('',*,*,#4025,.F.);+#6013=CYLINDRICAL_SURFACE('',#4029,1.E-01);+#6014=ADVANCED_FACE('',(#6015),#6022,.F.);+#6015=FACE_BOUND('',#6016,.F.);+#6016=EDGE_LOOP('',(#6017,#4086,#6020,#6021));+#6017=ORIENTED_EDGE('',*,*,#6018,.T.);+#6018=EDGE_CURVE('',#4016,#4083,#6019,.T.);+#6019=LINE('',#4017,#58);+#6020=ORIENTED_EDGE('',*,*,#6009,.F.);+#6021=ORIENTED_EDGE('',*,*,#4020,.F.);+#6022=PLANE('',#6023);+#6023=AXIS2_PLACEMENT_3D('',#4017,#1322,#73);+#6024=ADVANCED_FACE('',(#6025),#6032,.F.);+#6025=FACE_BOUND('',#6026,.F.);+#6026=EDGE_LOOP('',(#6027,#4081,#6030,#6031));+#6027=ORIENTED_EDGE('',*,*,#6028,.T.);+#6028=EDGE_CURVE('',#4011,#4078,#6029,.T.);+#6029=LINE('',#4012,#58);+#6030=ORIENTED_EDGE('',*,*,#6018,.F.);+#6031=ORIENTED_EDGE('',*,*,#4015,.F.);+#6032=PLANE('',#6033);+#6033=AXIS2_PLACEMENT_3D('',#4012,#73,#13);+#6034=ADVANCED_FACE('',(#6035),#6042,.F.);+#6035=FACE_BOUND('',#6036,.F.);+#6036=EDGE_LOOP('',(#6037,#4076,#6040,#6041));+#6037=ORIENTED_EDGE('',*,*,#6038,.T.);+#6038=EDGE_CURVE('',#4004,#4071,#6039,.T.);+#6039=LINE('',#4005,#58);+#6040=ORIENTED_EDGE('',*,*,#6028,.F.);+#6041=ORIENTED_EDGE('',*,*,#4010,.F.);+#6042=PLANE('',#6043);+#6043=AXIS2_PLACEMENT_3D('',#4005,#13,#28);+#6044=ADVANCED_FACE('',(#6045),#6052,.T.);+#6045=FACE_BOUND('',#6046,.F.);+#6046=EDGE_LOOP('',(#6047,#4069,#6050,#6051));+#6047=ORIENTED_EDGE('',*,*,#6048,.T.);+#6048=EDGE_CURVE('',#3999,#4066,#6049,.T.);+#6049=LINE('',#4000,#58);+#6050=ORIENTED_EDGE('',*,*,#6038,.F.);+#6051=ORIENTED_EDGE('',*,*,#4003,.F.);+#6052=CYLINDRICAL_SURFACE('',#6053,0.3);+#6053=AXIS2_PLACEMENT_3D('',#4008,#87,#3032);+#6054=ADVANCED_FACE('',(#6055),#6060,.F.);+#6055=FACE_BOUND('',#6056,.F.);+#6056=EDGE_LOOP('',(#6057,#4064,#6058,#6059));+#6057=ORIENTED_EDGE('',*,*,#4057,.T.);+#6058=ORIENTED_EDGE('',*,*,#6048,.F.);+#6059=ORIENTED_EDGE('',*,*,#3998,.F.);+#6060=PLANE('',#6061);+#6061=AXIS2_PLACEMENT_3D('',#3993,#5522,#3024);+#6062=ADVANCED_FACE('',(#6063),#6070,.T.);+#6063=FACE_BOUND('',#6064,.F.);+#6064=EDGE_LOOP('',(#6065,#4242,#6068,#6069));+#6065=ORIENTED_EDGE('',*,*,#6066,.T.);+#6066=EDGE_CURVE('',#4172,#4239,#6067,.T.);+#6067=LINE('',#4173,#58);+#6068=ORIENTED_EDGE('',*,*,#4637,.F.);+#6069=ORIENTED_EDGE('',*,*,#4176,.F.);+#6070=CYLINDRICAL_SURFACE('',#6071,0.3);+#6071=AXIS2_PLACEMENT_3D('',#4136,#87,#3066);+#6072=ADVANCED_FACE('',(#6073),#6080,.F.);+#6073=FACE_BOUND('',#6074,.F.);+#6074=EDGE_LOOP('',(#6075,#4237,#6078,#6079));+#6075=ORIENTED_EDGE('',*,*,#6076,.T.);+#6076=EDGE_CURVE('',#4166,#4233,#6077,.T.);+#6077=LINE('',#4167,#58);+#6078=ORIENTED_EDGE('',*,*,#6066,.F.);+#6079=ORIENTED_EDGE('',*,*,#4171,.F.);+#6080=PLANE('',#6081);+#6081=AXIS2_PLACEMENT_3D('',#4167,#5464,#3061);+#6082=ADVANCED_FACE('',(#6083),#6090,.F.);+#6083=FACE_BOUND('',#6084,.F.);+#6084=EDGE_LOOP('',(#6085,#4231,#6088,#6089));+#6085=ORIENTED_EDGE('',*,*,#6086,.T.);+#6086=EDGE_CURVE('',#4161,#4228,#6087,.T.);+#6087=LINE('',#4162,#58);+#6088=ORIENTED_EDGE('',*,*,#6076,.F.);+#6089=ORIENTED_EDGE('',*,*,#4165,.F.);+#6090=CYLINDRICAL_SURFACE('',#4169,1.E-01);+#6091=ADVANCED_FACE('',(#6092),#6099,.F.);+#6092=FACE_BOUND('',#6093,.F.);+#6093=EDGE_LOOP('',(#6094,#4226,#6097,#6098));+#6094=ORIENTED_EDGE('',*,*,#6095,.T.);+#6095=EDGE_CURVE('',#4156,#4223,#6096,.T.);+#6096=LINE('',#4157,#58);+#6097=ORIENTED_EDGE('',*,*,#6086,.F.);+#6098=ORIENTED_EDGE('',*,*,#4160,.F.);+#6099=PLANE('',#6100);+#6100=AXIS2_PLACEMENT_3D('',#4157,#1322,#73);+#6101=ADVANCED_FACE('',(#6102),#6109,.F.);+#6102=FACE_BOUND('',#6103,.F.);+#6103=EDGE_LOOP('',(#6104,#4221,#6107,#6108));+#6104=ORIENTED_EDGE('',*,*,#6105,.T.);+#6105=EDGE_CURVE('',#4151,#4218,#6106,.T.);+#6106=LINE('',#4152,#58);+#6107=ORIENTED_EDGE('',*,*,#6095,.F.);+#6108=ORIENTED_EDGE('',*,*,#4155,.F.);+#6109=PLANE('',#6110);+#6110=AXIS2_PLACEMENT_3D('',#4152,#73,#13);+#6111=ADVANCED_FACE('',(#6112),#6119,.F.);+#6112=FACE_BOUND('',#6113,.F.);+#6113=EDGE_LOOP('',(#6114,#4216,#6117,#6118));+#6114=ORIENTED_EDGE('',*,*,#6115,.T.);+#6115=EDGE_CURVE('',#4144,#4211,#6116,.T.);+#6116=LINE('',#4145,#58);+#6117=ORIENTED_EDGE('',*,*,#6105,.F.);+#6118=ORIENTED_EDGE('',*,*,#4150,.F.);+#6119=PLANE('',#6120);+#6120=AXIS2_PLACEMENT_3D('',#4145,#13,#28);+#6121=ADVANCED_FACE('',(#6122),#6129,.T.);+#6122=FACE_BOUND('',#6123,.F.);+#6123=EDGE_LOOP('',(#6124,#4209,#6127,#6128));+#6124=ORIENTED_EDGE('',*,*,#6125,.T.);+#6125=EDGE_CURVE('',#4139,#4206,#6126,.T.);+#6126=LINE('',#4140,#58);+#6127=ORIENTED_EDGE('',*,*,#6115,.F.);+#6128=ORIENTED_EDGE('',*,*,#4143,.F.);+#6129=CYLINDRICAL_SURFACE('',#6130,0.3);+#6130=AXIS2_PLACEMENT_3D('',#4148,#87,#3032);+#6131=ADVANCED_FACE('',(#6132),#6137,.F.);+#6132=FACE_BOUND('',#6133,.F.);+#6133=EDGE_LOOP('',(#6134,#4204,#6135,#6136));+#6134=ORIENTED_EDGE('',*,*,#4197,.T.);+#6135=ORIENTED_EDGE('',*,*,#6125,.F.);+#6136=ORIENTED_EDGE('',*,*,#4138,.F.);+#6137=PLANE('',#6138);+#6138=AXIS2_PLACEMENT_3D('',#4133,#5522,#3024);+#6139=ADVANCED_FACE('',(#6140),#6147,.T.);+#6140=FACE_BOUND('',#6141,.F.);+#6141=EDGE_LOOP('',(#6142,#4382,#6145,#6146));+#6142=ORIENTED_EDGE('',*,*,#6143,.T.);+#6143=EDGE_CURVE('',#4312,#4379,#6144,.T.);+#6144=LINE('',#4313,#58);+#6145=ORIENTED_EDGE('',*,*,#4649,.F.);+#6146=ORIENTED_EDGE('',*,*,#4316,.F.);+#6147=CYLINDRICAL_SURFACE('',#6148,0.3);+#6148=AXIS2_PLACEMENT_3D('',#4276,#87,#3066);+#6149=ADVANCED_FACE('',(#6150),#6157,.F.);+#6150=FACE_BOUND('',#6151,.F.);+#6151=EDGE_LOOP('',(#6152,#4377,#6155,#6156));+#6152=ORIENTED_EDGE('',*,*,#6153,.T.);+#6153=EDGE_CURVE('',#4306,#4373,#6154,.T.);+#6154=LINE('',#4307,#58);+#6155=ORIENTED_EDGE('',*,*,#6143,.F.);+#6156=ORIENTED_EDGE('',*,*,#4311,.F.);+#6157=PLANE('',#6158);+#6158=AXIS2_PLACEMENT_3D('',#4307,#5464,#3061);+#6159=ADVANCED_FACE('',(#6160),#6167,.F.);+#6160=FACE_BOUND('',#6161,.F.);+#6161=EDGE_LOOP('',(#6162,#4371,#6165,#6166));+#6162=ORIENTED_EDGE('',*,*,#6163,.T.);+#6163=EDGE_CURVE('',#4301,#4368,#6164,.T.);+#6164=LINE('',#4302,#58);+#6165=ORIENTED_EDGE('',*,*,#6153,.F.);+#6166=ORIENTED_EDGE('',*,*,#4305,.F.);+#6167=CYLINDRICAL_SURFACE('',#4309,1.E-01);+#6168=ADVANCED_FACE('',(#6169),#6176,.F.);+#6169=FACE_BOUND('',#6170,.F.);+#6170=EDGE_LOOP('',(#6171,#4366,#6174,#6175));+#6171=ORIENTED_EDGE('',*,*,#6172,.T.);+#6172=EDGE_CURVE('',#4296,#4363,#6173,.T.);+#6173=LINE('',#4297,#58);+#6174=ORIENTED_EDGE('',*,*,#6163,.F.);+#6175=ORIENTED_EDGE('',*,*,#4300,.F.);+#6176=PLANE('',#6177);+#6177=AXIS2_PLACEMENT_3D('',#4297,#1322,#73);+#6178=ADVANCED_FACE('',(#6179),#6186,.F.);+#6179=FACE_BOUND('',#6180,.F.);+#6180=EDGE_LOOP('',(#6181,#4361,#6184,#6185));+#6181=ORIENTED_EDGE('',*,*,#6182,.T.);+#6182=EDGE_CURVE('',#4291,#4358,#6183,.T.);+#6183=LINE('',#4292,#58);+#6184=ORIENTED_EDGE('',*,*,#6172,.F.);+#6185=ORIENTED_EDGE('',*,*,#4295,.F.);+#6186=PLANE('',#6187);+#6187=AXIS2_PLACEMENT_3D('',#4292,#73,#13);+#6188=ADVANCED_FACE('',(#6189),#6196,.F.);+#6189=FACE_BOUND('',#6190,.F.);+#6190=EDGE_LOOP('',(#6191,#4356,#6194,#6195));+#6191=ORIENTED_EDGE('',*,*,#6192,.T.);+#6192=EDGE_CURVE('',#4284,#4351,#6193,.T.);+#6193=LINE('',#4285,#58);+#6194=ORIENTED_EDGE('',*,*,#6182,.F.);+#6195=ORIENTED_EDGE('',*,*,#4290,.F.);+#6196=PLANE('',#6197);+#6197=AXIS2_PLACEMENT_3D('',#4285,#13,#28);+#6198=ADVANCED_FACE('',(#6199),#6206,.T.);+#6199=FACE_BOUND('',#6200,.F.);+#6200=EDGE_LOOP('',(#6201,#4349,#6204,#6205));+#6201=ORIENTED_EDGE('',*,*,#6202,.T.);+#6202=EDGE_CURVE('',#4279,#4346,#6203,.T.);+#6203=LINE('',#4280,#58);+#6204=ORIENTED_EDGE('',*,*,#6192,.F.);+#6205=ORIENTED_EDGE('',*,*,#4283,.F.);+#6206=CYLINDRICAL_SURFACE('',#6207,0.3);+#6207=AXIS2_PLACEMENT_3D('',#4288,#87,#3032);+#6208=ADVANCED_FACE('',(#6209),#6214,.F.);+#6209=FACE_BOUND('',#6210,.F.);+#6210=EDGE_LOOP('',(#6211,#4344,#6212,#6213));+#6211=ORIENTED_EDGE('',*,*,#4337,.T.);+#6212=ORIENTED_EDGE('',*,*,#6202,.F.);+#6213=ORIENTED_EDGE('',*,*,#4278,.F.);+#6214=PLANE('',#6215);+#6215=AXIS2_PLACEMENT_3D('',#4273,#5522,#3024);+#6216=ADVANCED_FACE('',(#6217),#6220,.F.);+#6217=FACE_BOUND('',#6218,.T.);+#6218=EDGE_LOOP('',(#6219));+#6219=ORIENTED_EDGE('',*,*,#4529,.F.);+#6220=PLANE('',#6221);+#6221=AXIS2_PLACEMENT_3D('',#4534,#1322,#59);+#6222=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6226)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#6223,#6224,#6225)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#6223=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#6224=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#6225=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#6226=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6223,'distance_accuracy_value','confusion accuracy');+#6227=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#6228=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#6229,#6239,#6240,#6241,#6242,#6243,#6244,#6245,#6246,#6247,#6248,#6249,#6250,#6251,#6252,#6261,#6262,#6263,#6264,#6265,#6266,#6267,#6268,#6269,#6270,#6271,#6272,#6273,#6274,#6275,#6276,#6277,#6278,#6279,#6280,#6281,#6282,#6283,#6284,#6285,#6286,#6287,#6288,#6289,#6290,#6291,#6292,#6293,#6294,#6295,#6296,#6297,#6298,#6299,#6300,#6301,#6302,#6303,#6304,#6305,#6306,#6307,#6308,#6309,#6310,#6311,#6312,#6313,#6314,#6315,#6316,#6317,#6318,#6319,#6320,#6321,#6322,#6323,#6324,#6325,#6326,#6327,#6328,#6329,#6330,#6331,#6332,#6333,#6334,#6335,#6336,#6337,#6338,#6339,#6340,#6341,#6342,#6343,#6344,#6345,#6346,#6347,#6348,#6349,#6350,#6351,#6352,#6353,#6354,#6355,#6356,#6357,#6358,#6359,#6360,#6361,#6362,#6363,#6364,#6365,#6366,#6367,#6368,#6369,#6370,#6371,#6372,#6373,#6374,#6375,#6376,#6377,#6378,#6379,#6380,#6381,#6382,#6383,#6384,#6385,#6386,#6387,#6388,#6389,#6390,#6391,#6392,#6393,#6394,#6395,#6396,#6397,#6398,#6399,#6400,#6401,#6402,#6403,#6404,#6405,#6406,#6407,#6408,#6409,#6410,#6411,#6412,#6413,#6414,#6415,#6416,#6417,#6418,#6419,#6420,#6421,#6422,#6423,#6424,#6425,#6426,#6427,#6428,#6429,#6430,#6431,#6432,#6433,#6434,#6435,#6436,#6437,#6438,#6439,#6440,#6441,#6442,#6443,#6444,#6445,#6446,#6447,#6448,#6449,#6450,#6451,#6452,#6453,#6454,#6455,#6456,#6457,#6458,#6459,#6460,#6461,#6462,#6463,#6464,#6465,#6466,#6467,#6468,#6469,#6470,#6471,#6472,#6473,#6474,#6475,#6476,#6477,#6478,#6479,#6480,#6481,#6482,#6483,#6484,#6485,#6486,#6487,#6488,#6489,#6490,#6491,#6492,#6493,#6494,#6495,#6496,#6497,#6498,#6499,#6500,#6501,#6502,#6503,#6504,#6505,#6506,#6507,#6508,#6509,#6510,#6511,#6512,#6513,#6514,#6515,#6516,#6517,#6518,#6519,#6520,#6521,#6522,#6523,#6524,#6525,#6526,#6527,#6528,#6529,#6530,#6531,#6532,#6533,#6534,#6535,#6536,#6537,#6538,#6539,#6540,#6541,#6542,#6543,#6544,#6545,#6546,#6547,#6548,#6549,#6550,#6551,#6552,#6553,#6554,#6555,#6556,#6557,#6558,#6559,#6560,#6561,#6562,#6563,#6564,#6565,#6566,#6567,#6568,#6569,#6570,#6571,#6572),#6222);+#6229=STYLED_ITEM('color',(#6230),#17);+#6230=PRESENTATION_STYLE_ASSIGNMENT((#6231,#6237));+#6231=SURFACE_STYLE_USAGE(.BOTH.,#6232);+#6232=SURFACE_SIDE_STYLE('',(#6233));+#6233=SURFACE_STYLE_FILL_AREA(#6234);+#6234=FILL_AREA_STYLE('',(#6235));+#6235=FILL_AREA_STYLE_COLOUR('',#6236);+#6236=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#6237=CURVE_STYLE('',#6238,POSITIVE_LENGTH_MEASURE(0.1),#6236);+#6238=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#6239=STYLED_ITEM('color',(#6230),#43);+#6240=STYLED_ITEM('color',(#6230),#96);+#6241=STYLED_ITEM('color',(#6230),#109);+#6242=STYLED_ITEM('color',(#6230),#128);+#6243=STYLED_ITEM('color',(#6230),#141);+#6244=STYLED_ITEM('color',(#6230),#234);+#6245=STYLED_ITEM('color',(#6230),#327);+#6246=STYLED_ITEM('color',(#6230),#340);+#6247=STYLED_ITEM('color',(#6230),#353);+#6248=STYLED_ITEM('color',(#6230),#362);+#6249=STYLED_ITEM('color',(#6230),#377);+#6250=STYLED_ITEM('color',(#6230),#441);+#6251=STYLED_ITEM('color',(#6230),#452);+#6252=STYLED_ITEM('color',(#6253),#471);+#6253=PRESENTATION_STYLE_ASSIGNMENT((#6254,#6260));+#6254=SURFACE_STYLE_USAGE(.BOTH.,#6255);+#6255=SURFACE_SIDE_STYLE('',(#6256));+#6256=SURFACE_STYLE_FILL_AREA(#6257);+#6257=FILL_AREA_STYLE('',(#6258));+#6258=FILL_AREA_STYLE_COLOUR('',#6259);+#6259=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#6260=CURVE_STYLE('',#6238,POSITIVE_LENGTH_MEASURE(0.1),#6259);+#6261=STYLED_ITEM('color',(#6230),#496);+#6262=STYLED_ITEM('color',(#6253),#514);+#6263=STYLED_ITEM('color',(#6230),#535);+#6264=STYLED_ITEM('color',(#6253),#553);+#6265=STYLED_ITEM('color',(#6230),#574);+#6266=STYLED_ITEM('color',(#6253),#592);+#6267=STYLED_ITEM('color',(#6230),#613);+#6268=STYLED_ITEM('color',(#6253),#631);+#6269=STYLED_ITEM('color',(#6230),#652);+#6270=STYLED_ITEM('color',(#6253),#670);+#6271=STYLED_ITEM('color',(#6230),#691);+#6272=STYLED_ITEM('color',(#6253),#709);+#6273=STYLED_ITEM('color',(#6230),#730);+#6274=STYLED_ITEM('color',(#6253),#748);+#6275=STYLED_ITEM('color',(#6230),#769);+#6276=STYLED_ITEM('color',(#6253),#787);+#6277=STYLED_ITEM('color',(#6230),#808);+#6278=STYLED_ITEM('color',(#6253),#826);+#6279=STYLED_ITEM('color',(#6230),#847);+#6280=STYLED_ITEM('color',(#6230),#857);+#6281=STYLED_ITEM('color',(#6253),#869);+#6282=STYLED_ITEM('color',(#6230),#890);+#6283=STYLED_ITEM('color',(#6253),#908);+#6284=STYLED_ITEM('color',(#6230),#929);+#6285=STYLED_ITEM('color',(#6253),#947);+#6286=STYLED_ITEM('color',(#6230),#968);+#6287=STYLED_ITEM('color',(#6253),#986);+#6288=STYLED_ITEM('color',(#6230),#1007);+#6289=STYLED_ITEM('color',(#6253),#1025);+#6290=STYLED_ITEM('color',(#6230),#1046);+#6291=STYLED_ITEM('color',(#6253),#1064);+#6292=STYLED_ITEM('color',(#6230),#1085);+#6293=STYLED_ITEM('color',(#6253),#1103);+#6294=STYLED_ITEM('color',(#6230),#1124);+#6295=STYLED_ITEM('color',(#6253),#1142);+#6296=STYLED_ITEM('color',(#6230),#1163);+#6297=STYLED_ITEM('color',(#6253),#1181);+#6298=STYLED_ITEM('color',(#6230),#1202);+#6299=STYLED_ITEM('color',(#6253),#1220);+#6300=STYLED_ITEM('color',(#6230),#1241);+#6301=STYLED_ITEM('color',(#6230),#1258);+#6302=STYLED_ITEM('color',(#6230),#1273);+#6303=STYLED_ITEM('color',(#6230),#1288);+#6304=STYLED_ITEM('color',(#6253),#1299);+#6305=STYLED_ITEM('color',(#6230),#1323);+#6306=STYLED_ITEM('color',(#6230),#1417);+#6307=STYLED_ITEM('color',(#6230),#1431);+#6308=STYLED_ITEM('color',(#6230),#1445);+#6309=STYLED_ITEM('color',(#6230),#1459);+#6310=STYLED_ITEM('color',(#6253),#1553);+#6311=STYLED_ITEM('color',(#6230),#1573);+#6312=STYLED_ITEM('color',(#6253),#1604);+#6313=STYLED_ITEM('color',(#6253),#1675);+#6314=STYLED_ITEM('color',(#6253),#1693);+#6315=STYLED_ITEM('color',(#6230),#1746);+#6316=STYLED_ITEM('color',(#6253),#1757);+#6317=STYLED_ITEM('color',(#6253),#1817);+#6318=STYLED_ITEM('color',(#6253),#1834);+#6319=STYLED_ITEM('color',(#6230),#1887);+#6320=STYLED_ITEM('color',(#6253),#1898);+#6321=STYLED_ITEM('color',(#6253),#1958);+#6322=STYLED_ITEM('color',(#6253),#1975);+#6323=STYLED_ITEM('color',(#6230),#2028);+#6324=STYLED_ITEM('color',(#6253),#2039);+#6325=STYLED_ITEM('color',(#6253),#2099);+#6326=STYLED_ITEM('color',(#6253),#2116);+#6327=STYLED_ITEM('color',(#6230),#2169);+#6328=STYLED_ITEM('color',(#6253),#2180);+#6329=STYLED_ITEM('color',(#6253),#2240);+#6330=STYLED_ITEM('color',(#6253),#2257);+#6331=STYLED_ITEM('color',(#6230),#2310);+#6332=STYLED_ITEM('color',(#6253),#2321);+#6333=STYLED_ITEM('color',(#6253),#2381);+#6334=STYLED_ITEM('color',(#6253),#2398);+#6335=STYLED_ITEM('color',(#6230),#2451);+#6336=STYLED_ITEM('color',(#6253),#2462);+#6337=STYLED_ITEM('color',(#6253),#2522);+#6338=STYLED_ITEM('color',(#6253),#2539);+#6339=STYLED_ITEM('color',(#6230),#2592);+#6340=STYLED_ITEM('color',(#6253),#2603);+#6341=STYLED_ITEM('color',(#6253),#2663);+#6342=STYLED_ITEM('color',(#6253),#2680);+#6343=STYLED_ITEM('color',(#6230),#2733);+#6344=STYLED_ITEM('color',(#6253),#2744);+#6345=STYLED_ITEM('color',(#6253),#2804);+#6346=STYLED_ITEM('color',(#6253),#2821);+#6347=STYLED_ITEM('color',(#6230),#2874);+#6348=STYLED_ITEM('color',(#6253),#2882);+#6349=STYLED_ITEM('color',(#6253),#2940);+#6350=STYLED_ITEM('color',(#6253),#2957);+#6351=STYLED_ITEM('color',(#6253),#3005);+#6352=STYLED_ITEM('color',(#6253),#3071);+#6353=STYLED_ITEM('color',(#6253),#3087);+#6354=STYLED_ITEM('color',(#6230),#3135);+#6355=STYLED_ITEM('color',(#6253),#3145);+#6356=STYLED_ITEM('color',(#6253),#3205);+#6357=STYLED_ITEM('color',(#6253),#3221);+#6358=STYLED_ITEM('color',(#6230),#3274);+#6359=STYLED_ITEM('color',(#6253),#3285);+#6360=STYLED_ITEM('color',(#6253),#3345);+#6361=STYLED_ITEM('color',(#6253),#3361);+#6362=STYLED_ITEM('color',(#6230),#3414);+#6363=STYLED_ITEM('color',(#6253),#3425);+#6364=STYLED_ITEM('color',(#6253),#3485);+#6365=STYLED_ITEM('color',(#6253),#3501);+#6366=STYLED_ITEM('color',(#6230),#3554);+#6367=STYLED_ITEM('color',(#6253),#3565);+#6368=STYLED_ITEM('color',(#6253),#3625);+#6369=STYLED_ITEM('color',(#6253),#3641);+#6370=STYLED_ITEM('color',(#6230),#3694);+#6371=STYLED_ITEM('color',(#6253),#3705);+#6372=STYLED_ITEM('color',(#6253),#3765);+#6373=STYLED_ITEM('color',(#6253),#3781);+#6374=STYLED_ITEM('color',(#6230),#3834);+#6375=STYLED_ITEM('color',(#6253),#3845);+#6376=STYLED_ITEM('color',(#6253),#3905);+#6377=STYLED_ITEM('color',(#6253),#3921);+#6378=STYLED_ITEM('color',(#6230),#3974);+#6379=STYLED_ITEM('color',(#6253),#3985);+#6380=STYLED_ITEM('color',(#6253),#4045);+#6381=STYLED_ITEM('color',(#6253),#4061);+#6382=STYLED_ITEM('color',(#6230),#4114);+#6383=STYLED_ITEM('color',(#6253),#4125);+#6384=STYLED_ITEM('color',(#6253),#4185);+#6385=STYLED_ITEM('color',(#6253),#4201);+#6386=STYLED_ITEM('color',(#6230),#4254);+#6387=STYLED_ITEM('color',(#6253),#4265);+#6388=STYLED_ITEM('color',(#6253),#4325);+#6389=STYLED_ITEM('color',(#6253),#4341);+#6390=STYLED_ITEM('color',(#6253),#4392);+#6391=STYLED_ITEM('color',(#6253),#4402);+#6392=STYLED_ITEM('color',(#6253),#4414);+#6393=STYLED_ITEM('color',(#6253),#4426);+#6394=STYLED_ITEM('color',(#6253),#4438);+#6395=STYLED_ITEM('color',(#6253),#4450);+#6396=STYLED_ITEM('color',(#6253),#4462);+#6397=STYLED_ITEM('color',(#6253),#4474);+#6398=STYLED_ITEM('color',(#6253),#4486);+#6399=STYLED_ITEM('color',(#6253),#4498);+#6400=STYLED_ITEM('color',(#6230),#4510);+#6401=STYLED_ITEM('color',(#6230),#4539);+#6402=STYLED_ITEM('color',(#6253),#4548);+#6403=STYLED_ITEM('color',(#6253),#4560);+#6404=STYLED_ITEM('color',(#6253),#4572);+#6405=STYLED_ITEM('color',(#6253),#4584);+#6406=STYLED_ITEM('color',(#6253),#4596);+#6407=STYLED_ITEM('color',(#6253),#4608);+#6408=STYLED_ITEM('color',(#6253),#4620);+#6409=STYLED_ITEM('color',(#6253),#4632);+#6410=STYLED_ITEM('color',(#6253),#4644);+#6411=STYLED_ITEM('color',(#6230),#4656);+#6412=STYLED_ITEM('color',(#6253),#4665);+#6413=STYLED_ITEM('color',(#6230),#4675);+#6414=STYLED_ITEM('color',(#6253),#4682);+#6415=STYLED_ITEM('color',(#6253),#4692);+#6416=STYLED_ITEM('color',(#6253),#4703);+#6417=STYLED_ITEM('color',(#6253),#4713);+#6418=STYLED_ITEM('color',(#6253),#4723);+#6419=STYLED_ITEM('color',(#6253),#4733);+#6420=STYLED_ITEM('color',(#6253),#4743);+#6421=STYLED_ITEM('color',(#6253),#4753);+#6422=STYLED_ITEM('color',(#6253),#4762);+#6423=STYLED_ITEM('color',(#6253),#4772);+#6424=STYLED_ITEM('color',(#6253),#4782);+#6425=STYLED_ITEM('color',(#6253),#4792);+#6426=STYLED_ITEM('color',(#6253),#4802);+#6427=STYLED_ITEM('color',(#6253),#4812);+#6428=STYLED_ITEM('color',(#6253),#4822);+#6429=STYLED_ITEM('color',(#6253),#4832);+#6430=STYLED_ITEM('color',(#6253),#4840);+#6431=STYLED_ITEM('color',(#6253),#4850);+#6432=STYLED_ITEM('color',(#6253),#4860);+#6433=STYLED_ITEM('color',(#6253),#4870);+#6434=STYLED_ITEM('color',(#6253),#4880);+#6435=STYLED_ITEM('color',(#6253),#4890);+#6436=STYLED_ITEM('color',(#6253),#4900);+#6437=STYLED_ITEM('color',(#6253),#4910);+#6438=STYLED_ITEM('color',(#6253),#4918);+#6439=STYLED_ITEM('color',(#6253),#4928);+#6440=STYLED_ITEM('color',(#6253),#4938);+#6441=STYLED_ITEM('color',(#6253),#4948);+#6442=STYLED_ITEM('color',(#6253),#4958);+#6443=STYLED_ITEM('color',(#6253),#4968);+#6444=STYLED_ITEM('color',(#6253),#4978);+#6445=STYLED_ITEM('color',(#6253),#4988);+#6446=STYLED_ITEM('color',(#6253),#4996);+#6447=STYLED_ITEM('color',(#6253),#5006);+#6448=STYLED_ITEM('color',(#6253),#5016);+#6449=STYLED_ITEM('color',(#6253),#5026);+#6450=STYLED_ITEM('color',(#6253),#5036);+#6451=STYLED_ITEM('color',(#6253),#5046);+#6452=STYLED_ITEM('color',(#6253),#5056);+#6453=STYLED_ITEM('color',(#6253),#5066);+#6454=STYLED_ITEM('color',(#6253),#5074);+#6455=STYLED_ITEM('color',(#6253),#5084);+#6456=STYLED_ITEM('color',(#6253),#5094);+#6457=STYLED_ITEM('color',(#6253),#5104);+#6458=STYLED_ITEM('color',(#6253),#5114);+#6459=STYLED_ITEM('color',(#6253),#5124);+#6460=STYLED_ITEM('color',(#6253),#5134);+#6461=STYLED_ITEM('color',(#6253),#5144);+#6462=STYLED_ITEM('color',(#6253),#5152);+#6463=STYLED_ITEM('color',(#6253),#5162);+#6464=STYLED_ITEM('color',(#6253),#5172);+#6465=STYLED_ITEM('color',(#6253),#5182);+#6466=STYLED_ITEM('color',(#6253),#5192);+#6467=STYLED_ITEM('color',(#6253),#5202);+#6468=STYLED_ITEM('color',(#6253),#5212);+#6469=STYLED_ITEM('color',(#6253),#5222);+#6470=STYLED_ITEM('color',(#6253),#5230);+#6471=STYLED_ITEM('color',(#6253),#5240);+#6472=STYLED_ITEM('color',(#6253),#5250);+#6473=STYLED_ITEM('color',(#6253),#5260);+#6474=STYLED_ITEM('color',(#6253),#5270);+#6475=STYLED_ITEM('color',(#6253),#5280);+#6476=STYLED_ITEM('color',(#6253),#5290);+#6477=STYLED_ITEM('color',(#6253),#5300);+#6478=STYLED_ITEM('color',(#6253),#5308);+#6479=STYLED_ITEM('color',(#6253),#5318);+#6480=STYLED_ITEM('color',(#6253),#5328);+#6481=STYLED_ITEM('color',(#6253),#5338);+#6482=STYLED_ITEM('color',(#6253),#5348);+#6483=STYLED_ITEM('color',(#6253),#5358);+#6484=STYLED_ITEM('color',(#6253),#5368);+#6485=STYLED_ITEM('color',(#6253),#5378);+#6486=STYLED_ITEM('color',(#6253),#5386);+#6487=STYLED_ITEM('color',(#6253),#5396);+#6488=STYLED_ITEM('color',(#6253),#5406);+#6489=STYLED_ITEM('color',(#6253),#5416);+#6490=STYLED_ITEM('color',(#6253),#5426);+#6491=STYLED_ITEM('color',(#6253),#5436);+#6492=STYLED_ITEM('color',(#6253),#5446);+#6493=STYLED_ITEM('color',(#6253),#5454);+#6494=STYLED_ITEM('color',(#6253),#5465);+#6495=STYLED_ITEM('color',(#6253),#5474);+#6496=STYLED_ITEM('color',(#6253),#5484);+#6497=STYLED_ITEM('color',(#6253),#5494);+#6498=STYLED_ITEM('color',(#6253),#5504);+#6499=STYLED_ITEM('color',(#6253),#5514);+#6500=STYLED_ITEM('color',(#6253),#5523);+#6501=STYLED_ITEM('color',(#6253),#5533);+#6502=STYLED_ITEM('color',(#6253),#5543);+#6503=STYLED_ITEM('color',(#6253),#5552);+#6504=STYLED_ITEM('color',(#6253),#5562);+#6505=STYLED_ITEM('color',(#6253),#5572);+#6506=STYLED_ITEM('color',(#6253),#5582);+#6507=STYLED_ITEM('color',(#6253),#5592);+#6508=STYLED_ITEM('color',(#6253),#5600);+#6509=STYLED_ITEM('color',(#6253),#5610);+#6510=STYLED_ITEM('color',(#6253),#5620);+#6511=STYLED_ITEM('color',(#6253),#5629);+#6512=STYLED_ITEM('color',(#6253),#5639);+#6513=STYLED_ITEM('color',(#6253),#5649);+#6514=STYLED_ITEM('color',(#6253),#5659);+#6515=STYLED_ITEM('color',(#6253),#5669);+#6516=STYLED_ITEM('color',(#6253),#5677);+#6517=STYLED_ITEM('color',(#6253),#5687);+#6518=STYLED_ITEM('color',(#6253),#5697);+#6519=STYLED_ITEM('color',(#6253),#5706);+#6520=STYLED_ITEM('color',(#6253),#5716);+#6521=STYLED_ITEM('color',(#6253),#5726);+#6522=STYLED_ITEM('color',(#6253),#5736);+#6523=STYLED_ITEM('color',(#6253),#5746);+#6524=STYLED_ITEM('color',(#6253),#5754);+#6525=STYLED_ITEM('color',(#6253),#5764);+#6526=STYLED_ITEM('color',(#6253),#5774);+#6527=STYLED_ITEM('color',(#6253),#5783);+#6528=STYLED_ITEM('color',(#6253),#5793);+#6529=STYLED_ITEM('color',(#6253),#5803);+#6530=STYLED_ITEM('color',(#6253),#5813);+#6531=STYLED_ITEM('color',(#6253),#5823);+#6532=STYLED_ITEM('color',(#6253),#5831);+#6533=STYLED_ITEM('color',(#6253),#5841);+#6534=STYLED_ITEM('color',(#6253),#5851);+#6535=STYLED_ITEM('color',(#6253),#5860);+#6536=STYLED_ITEM('color',(#6253),#5870);+#6537=STYLED_ITEM('color',(#6253),#5880);+#6538=STYLED_ITEM('color',(#6253),#5890);+#6539=STYLED_ITEM('color',(#6253),#5900);+#6540=STYLED_ITEM('color',(#6253),#5908);+#6541=STYLED_ITEM('color',(#6253),#5918);+#6542=STYLED_ITEM('color',(#6253),#5928);+#6543=STYLED_ITEM('color',(#6253),#5937);+#6544=STYLED_ITEM('color',(#6253),#5947);+#6545=STYLED_ITEM('color',(#6253),#5957);+#6546=STYLED_ITEM('color',(#6253),#5967);+#6547=STYLED_ITEM('color',(#6253),#5977);+#6548=STYLED_ITEM('color',(#6253),#5985);+#6549=STYLED_ITEM('color',(#6253),#5995);+#6550=STYLED_ITEM('color',(#6253),#6005);+#6551=STYLED_ITEM('color',(#6253),#6014);+#6552=STYLED_ITEM('color',(#6253),#6024);+#6553=STYLED_ITEM('color',(#6253),#6034);+#6554=STYLED_ITEM('color',(#6253),#6044);+#6555=STYLED_ITEM('color',(#6253),#6054);+#6556=STYLED_ITEM('color',(#6253),#6062);+#6557=STYLED_ITEM('color',(#6253),#6072);+#6558=STYLED_ITEM('color',(#6253),#6082);+#6559=STYLED_ITEM('color',(#6253),#6091);+#6560=STYLED_ITEM('color',(#6253),#6101);+#6561=STYLED_ITEM('color',(#6253),#6111);+#6562=STYLED_ITEM('color',(#6253),#6121);+#6563=STYLED_ITEM('color',(#6253),#6131);+#6564=STYLED_ITEM('color',(#6253),#6139);+#6565=STYLED_ITEM('color',(#6253),#6149);+#6566=STYLED_ITEM('color',(#6253),#6159);+#6567=STYLED_ITEM('color',(#6253),#6168);+#6568=STYLED_ITEM('color',(#6253),#6178);+#6569=STYLED_ITEM('color',(#6253),#6188);+#6570=STYLED_ITEM('color',(#6253),#6198);+#6571=STYLED_ITEM('color',(#6253),#6208);+#6572=STYLED_ITEM('color',(#6573),#6216);+#6573=PRESENTATION_STYLE_ASSIGNMENT((#6574,#6580));+#6574=SURFACE_STYLE_USAGE(.BOTH.,#6575);+#6575=SURFACE_SIDE_STYLE('',(#6576));+#6576=SURFACE_STYLE_FILL_AREA(#6577);+#6577=FILL_AREA_STYLE('',(#6578));+#6578=FILL_AREA_STYLE_COLOUR('',#6579);+#6579=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#6580=CURVE_STYLE('',#6238,POSITIVE_LENGTH_MEASURE(0.1),#6579);+ENDSEC;+END-ISO-10303-21;