ATMEGA8-16AU

@@ -0,0 +1,117 @@+# ATMEGA8-16AU++**Microchip Tech** · Pre-ordered MCUs · TQFP-32(7x7)++ATMEGA8-16AU from Microchip Tech, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PD3 (INT1) | bidirectional | Port D bit 3 is a bidirectional I/O pin with internal pull-up that can also serve as external interrupt source INT1. |+| 2 | PD4 (XCK/T0) | bidirectional | Port D bit 4 is a bidirectional I/O pin with internal pull-up that also serves as USART external clock XCK and Timer/Counter0 external counter input T0. |+| 3 | GND | power_in | Ground. |+| 4 | VCC | power_in | Digital supply voltage. |+| 5 | GND | power_in | Ground. |+| 6 | VCC | power_in | Digital supply voltage. |+| 7 | PB6 (XTAL1/TOSC1) | input | Port B bit 6 serves as input to the inverting oscillator amplifier and to the internal clock operating circuit, or as TOSC1 for the asynchronous timer. |+| 8 | PB7 (XTAL2/TOSC2) | output | Port B bit 7 serves as output of the inverting oscillator amplifier (XTAL2), or as TOSC2 when the asynchronous timer is enabled. |+| 9 | PD5 (T1) | bidirectional | Port D bit 5 is a bidirectional I/O pin with internal pull-up that also serves as Timer/Counter1 external counter input T1. |+| 10 | PD6 (AIN0) | bidirectional | Port D bit 6 is a bidirectional I/O pin that serves as Analog Comparator positive input AIN0 and should be configured as input with pull-up off when used as comparator input. |+| 11 | PD7 (AIN1) | bidirectional | Port D bit 7 is a bidirectional I/O pin that serves as Analog Comparator negative input AIN1 and should be configured as input with pull-up off when used as comparator input. |+| 12 | PB0 (ICP1) | bidirectional | Port B bit 0 is a bidirectional I/O pin that serves as Input Capture pin ICP1 for Timer/Counter1. |+| 13 | PB1 (OC1A) | bidirectional | Port B bit 1 is a bidirectional I/O pin that serves as Timer/Counter1 Output Compare A output OC1A when configured as output. |+| 14 | PB2 (SS/OC1B) | bidirectional | Port B bit 2 is a bidirectional I/O pin that serves as SPI Slave Select SS and Timer/Counter1 Output Compare B output OC1B. |+| 15 | PB3 (MOSI/OC2) | bidirectional | Port B bit 3 is a bidirectional I/O pin that serves as SPI Master Output/Slave Input MOSI and Timer/Counter2 Output Compare output OC2. |+| 16 | PB4 (MISO) | bidirectional | Port B bit 4 is a bidirectional I/O pin with internal pull-up that serves as SPI Master Input/Slave Output MISO. |+| 17 | PB5 (SCK) | bidirectional | Port B bit 5 is a bidirectional I/O pin with internal pull-up that serves as SPI clock SCK. |+| 18 | AVCC | power_in | Supply voltage pin for the A/D Converter, Port C(3..0) and ADC(7..6), which should be externally connected to VCC even if the ADC is not used. |+| 19 | ADC6 | input | Analog input channel 6 of the A/D converter, available in TQFP and QFN/MLF packages only, powered from the analog supply with 10-bit accuracy. |+| 20 | AREF | input | Analog reference pin for the A/D Converter. |+| 21 | GND | power_in | Ground. |+| 22 | ADC7 | input | Analog input channel 7 of the A/D converter, available in TQFP and QFN/MLF packages only, powered from the analog supply with 10-bit accuracy. |+| 23 | PC0 (ADC0) | bidirectional | Port C bit 0 is a bidirectional I/O pin that can also serve as ADC input channel 0 using analog power. |+| 24 | PC1 (ADC1) | bidirectional | Port C bit 1 is a bidirectional I/O pin that can also serve as ADC input channel 1 using analog power. |+| 25 | PC2 (ADC2) | bidirectional | Port C bit 2 is a bidirectional I/O pin that can also serve as ADC input channel 2 using analog power. |+| 26 | PC3 (ADC3) | bidirectional | Port C bit 3 is a bidirectional I/O pin that can also serve as ADC input channel 3 using analog power. |+| 27 | PC4 (ADC4/SDA) | bidirectional | Port C bit 4 is a bidirectional I/O pin that serves as Two-wire Serial Interface data SDA when enabled and as ADC input channel 4 using digital power. |+| 28 | PC5 (ADC5/SCL) | bidirectional | Port C bit 5 is a bidirectional I/O pin that serves as Two-wire Serial Interface clock SCL when enabled and as ADC input channel 5 using digital power. |+| 29 | PC6 (RESET) | input | Reset input when the RSTDISBL fuse is unprogrammed; a low level longer than the minimum pulse length generates a reset, otherwise the pin is an I/O pin. |+| 30 | PD0 (RXD) | bidirectional | Port D bit 0 is a bidirectional I/O pin that serves as USART receive data input RXD when the USART receiver is enabled. |+| 31 | PD1 (TXD) | bidirectional | Port D bit 1 is a bidirectional I/O pin that serves as USART transmit data output TXD when the USART transmitter is enabled. |+| 32 | PD2 (INT0) | bidirectional | Port D bit 2 is a bidirectional I/O pin that can serve as external interrupt source INT0. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | TQFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Operating voltage (ATmega8) | VCC | 4.5 |  | 5.5 | V | ATmega8 (16 MHz speed grade) | 1 |+| Speed grade oscillator frequency | 1/tCLCL | 0 |  | 16 | MHz | VCC = 4.5V - 5.5V | 237 |+| Maximum operating voltage |  |  |  | 6 | V |  | 235 |+| Voltage on RESET with respect to Ground |  | -0.5 |  | 13 | V |  | 235 |+| Storage temperature |  | -65 |  | 150 | C |  | 235 |+| Operating temperature |  | -55 |  | 125 | C |  | 235 |+| DC current per I/O pin |  |  |  | 40 | mA |  | 235 |+| DC current VCC and GND pins |  |  |  | 300 | mA |  | 235 |+| Power-on Reset threshold voltage (rising) | VPOT | 1.4 |  | 2.3 | V | rising | 38 |+| Power-on Reset threshold voltage (falling) | VPOT | 1.3 |  | 2.3 | V | falling | 38 |+| RESET pin threshold voltage | VRST | 0.2 | 0.9 |  | VCC |  | 38 |+| Minimum pulse width on RESET pin | tRST | 1.5 |  |  | µs |  | 38 |+| Brown-out reset threshold voltage | VBOT | 3.7 | 4 | 4.5 | V | BODLEVEL = 0 | 38 |+| Bandgap reference voltage | VBG | 1.15 | 1.3 | 1.4 | V |  | 42 |+| Internal voltage reference | VINT | 2.3 | 2.56 | 2.9 | V |  | 241 |+| Input low voltage except XTAL1 and RESET pins | VIL | -0.5 |  | 0.2 | VCC | VCC = 2.7V - 5.5V | 235 |+| Input high voltage except XTAL1 and RESET pins | VIH | 0.6 |  |  | VCC | VCC = 2.7V - 5.5V | 235 |+| Input low voltage XTAL1 pin | VIL1 | -0.5 |  | 0.1 | VCC | VCC = 2.7V - 5.5V | 235 |+| Input high voltage XTAL1 pin | VIH1 | 0.8 |  |  | VCC | VCC = 2.7V - 5.5V | 235 |+| Input low voltage RESET pin | VIL2 | -0.5 |  | 0.2 | VCC | VCC = 2.7V - 5.5V | 235 |+| Input high voltage RESET pin | VIH2 | 0.9 |  |  | VCC | VCC = 2.7V - 5.5V | 235 |+| Input low voltage RESET pin as I/O | VIL3 | -0.5 |  | 0.2 | VCC | VCC = 2.7V - 5.5V | 235 |+| Input high voltage RESET pin as I/O | VIH3 | 0.6 |  |  | VCC | VCC = 2.7V - 5.5V | 235 |+| Output low voltage (Ports B,C,D) | VOL |  |  | 0.9 | V | IOL = 20mA, VCC = 5V | 235 |+| Output low voltage (Ports B,C,D) | VOL |  |  | 0.6 | V | IOL = 10mA, VCC = 3V | 235 |+| Output high voltage (Ports B,C,D) | VOH | 4.2 |  |  | V | IOH = -20mA, VCC = 5V | 235 |+| Output high voltage (Ports B,C,D) | VOH | 2.2 |  |  | V | IOH = -10mA, VCC = 3V | 235 |+| Input leakage current I/O pin (pin low) | IIL |  |  | 1 | µA | Vcc = 5.5V, pin low (absolute value) | 235 |+| Input leakage current I/O pin (pin high) | IIH |  |  | 1 | µA | Vcc = 5.5V, pin high (absolute value) | 235 |+| Reset pull-up resistor | RRST | 30 |  | 80 | k |  | 235 |+| I/O pin pull-up resistor | Rpu | 20 |  | 50 | k |  | 235 |+| Power supply current active | ICC |  | 11 | 15 | mA | Active 8MHz, VCC = 5V (ATmega8) | 235 |+| Power supply current idle | ICC |  | 4.5 | 7 | mA | Idle 8MHz, VCC = 5V (ATmega8) | 235 |+| Power-down mode current, WDT enabled | ICC |  | 22 | 28 | µA | WDT enabled, VCC = 3V | 235 |+| Power-down mode current, WDT disabled | ICC |  | 1 | 3 | µA | WDT disabled, VCC = 3V | 235 |+| Analog comparator input offset voltage | VACIO |  |  | 40 | mV | VCC = 5V, Vin = VCC/2 | 235 |+| Analog comparator input leakage current | IACLK | -50 |  | 50 | nA | VCC = 5V, Vin = VCC/2 | 235 |+| Analog comparator propagation delay | tACPD |  |  | 750 | ns | VCC = 2.7V | 235 |+| Analog comparator propagation delay | tACPD |  |  | 500 | ns | VCC = 5.0V | 235 |+| Clock period | tCLCL | 62.5 |  |  | ns | VCC = 4.5V - 5.5V | 237 |+| High time | tCHCX | 25 |  |  | ns | VCC = 4.5V - 5.5V | 237 |+| Low time | tCLCX | 25 |  |  | ns | VCC = 4.5V - 5.5V | 237 |++## CAD (KiCad official)++- Symbol: `ATMEGA8-16AU`+- Footprint: `Package_QFP:TQFP-32_7x7mm_P0.8mm`+- 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `atmega8-16au-etched.step` / `atmega8-16au-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `atmega8-16au.step` / `atmega8-16au.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2486-8-bit-AVR-microcontroller-ATmega8_L_datasheet.pdf) (331 pp, sha256 `279c22ef16189af1`, retrieved 2026-10-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/atmega8-16au-datasheet.pdf)

@@ -0,0 +1,788 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "ATMEGA8-16AU",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 32,+      "span_mm": 9.8,+      "dash_mm": 0.245,+      "gap_mm": 0.147,+      "pad_stroke_mm": 0.0588+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 32,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.784,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -4.5,+      4.5,+      -4.5,+      4.5+    ],+    "pads_bbox_mm": [+      -4.9,+      4.9,+      -4.9,+      4.9+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "atmega8-16au-etched.glb",+    "glb_sha256": "0c6c7cb151a63baa5c9ed454b870a5c4679fa2260283e7f4e44df632751e121d",+    "footprint": "atmega8-16au.kicad_mod",+    "footprint_sha256": "1d0afd4669db1be952670216fc9442ae8c30a3a7adb0e32d0bf048ed6bc558da",+    "pins": "page.json component.pins",+    "pins_sha256": "0a2dd2a23a4de98cf84adccfa55dfaa5c514cdf3283a01b1c670f2f876c3a8aa"+  },+  "generator": "adom-wiki 1.8.0 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "PD3 (INT1)",+      "x": -5.0,+      "y": -2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "2",+      "text": "PD4 (XCK/T0)",+      "x": -5.0,+      "y": -2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "3",+      "text": "GND",+      "x": -5.0,+      "y": -1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "4",+      "text": "VCC",+      "x": -5.0,+      "y": -0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "5",+      "text": "GND",+      "x": -5.0,+      "y": 0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "6",+      "text": "VCC",+      "x": -5.0,+      "y": 1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "7",+      "text": "PB6 (XTAL1/TOSC1)",+      "x": -5.0,+      "y": 2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "8",+      "text": "PB7 (XTAL2/TOSC2)",+      "x": -5.0,+      "y": 2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "9",+      "text": "PD5 (T1)",+      "x": -2.8,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "10",+      "text": "PD6 (AIN0)",+      "x": -2.0,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "11",+      "text": "PD7 (AIN1)",+      "x": -1.2,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "12",+      "text": "PB0 (ICP1)",+      "x": -0.4,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "13",+      "text": "PB1 (OC1A)",+      "x": 0.4,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "14",+      "text": "PB2 (SS/OC1B)",+      "x": 1.2,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "15",+      "text": "PB3 (MOSI/OC2)",+      "x": 2.0,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "16",+      "text": "PB4 (MISO)",+      "x": 2.8,+      "y": 5.0,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "17",+      "text": "PB5 (SCK)",+      "x": 5.0,+      "y": 2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "18",+      "text": "AVCC",+      "x": 5.0,+      "y": 2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "19",+      "text": "ADC6",+      "x": 5.0,+      "y": 1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "20",+      "text": "AREF",+      "x": 5.0,+      "y": 0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "21",+      "text": "GND",+      "x": 5.0,+      "y": -0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "22",+      "text": "ADC7",+      "x": 5.0,+      "y": -1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "23",+      "text": "PC0 (ADC0)",+      "x": 5.0,+      "y": -2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "24",+      "text": "PC1 (ADC1)",+      "x": 5.0,+      "y": -2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "25",+      "text": "PC2 (ADC2)",+      "x": 2.8,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "26",+      "text": "PC3 (ADC3)",+      "x": 2.0,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "27",+      "text": "PC4 (ADC4/SDA)",+      "x": 1.2,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "28",+      "text": "PC5 (ADC5/SCL)",+      "x": 0.4,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "29",+      "text": "PC6 (RESET)",+      "x": -0.4,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "30",+      "text": "PD0 (RXD)",+      "x": -1.2,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "31",+      "text": "PD1 (TXD)",+      "x": -2.0,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "32",+      "text": "PD2 (INT0)",+      "x": -2.8,+      "y": -5.0,+      "align": "left",+      "vertical": true,+      "h": 0.4+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        -2.8+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        -2.0+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        -1.2+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        -0.4+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        0.4+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        1.2+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        2.0+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.1625,+        2.8+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -1.2,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -0.4,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        0.4,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        1.2,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8,+        4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        2.8+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        2.0+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        1.2+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        0.4+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        -0.4+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        -1.2+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        -2.0+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        4.1625,+        -2.8+      ],+      "size_mm": [+        1.475,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        2.8,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        1.2,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        0.4,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -0.4,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -1.2,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -2.8,+        -4.1625+      ],+      "size_mm": [+        0.55,+        1.475+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,360 @@+(footprint "TQFP-32_7x7mm_P0.8mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "TQFP, 32 Pin (JEDEC MS-026 variation ABA, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BZ.pdf#page=656)")+	(tags "TQFP QFP")+	(property "Reference" "REF**"+		(at 0 -5.85 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "TQFP-32_7x7mm_P0.8mm"+		(at 0 5.85 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -3.61 -3.61)+		(end -3.335 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.61 -3.335)+		(end -3.61 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.61 3.61)+		(end -3.61 3.335)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.335 3.61)+		(end -3.61 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.335 -3.61)+		(end 3.61 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 -3.61)+		(end 3.61 -3.335)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 3.335)+		(end 3.61 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 3.61)+		(end 3.335 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -4.25 -3.34)+			(xy -4.59 -3.81)+			(xy -3.91 -3.81)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -2.5 -3.5)+			(xy 3.5 -3.5)+			(xy 3.5 3.5)+			(xy -3.5 3.5)+			(xy -3.5 -2.5)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -4.1625 -2.8)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -4.1625 -2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -4.1625 -1.2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -4.1625 -0.4)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -4.1625 0.4)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -4.1625 1.2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -4.1625 2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -4.1625 2.8)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -2.8 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -2 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at -1.2 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at -0.4 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 0.4 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 1.2 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 2 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 2.8 4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 4.1625 2.8)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 4.1625 2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 4.1625 1.2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 4.1625 0.4)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "21" smd roundrect+		(at 4.1625 -0.4)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "22" smd roundrect+		(at 4.1625 -1.2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "23" smd roundrect+		(at 4.1625 -2)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "24" smd roundrect+		(at 4.1625 -2.8)+		(size 1.475 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "25" smd roundrect+		(at 2.8 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "26" smd roundrect+		(at 2 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "27" smd roundrect+		(at 1.2 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "28" smd roundrect+		(at 0.4 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "29" smd roundrect+		(at -0.4 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "30" smd roundrect+		(at -1.2 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "31" smd roundrect+		(at -2 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "32" smd roundrect+		(at -2.8 -4.1625)+		(size 0.55 1.475)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_QFP.3dshapes/TQFP-32_7x7mm_P0.8mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -5.15 -3.33) (xy -3.75 -3.33) (xy -3.75 -3.75) (xy -3.33 -3.75) (xy -3.33 -5.15) (xy 3.33 -5.15) (xy 3.33 -3.75) (xy 3.75 -3.75) (xy 3.75 -3.33) (xy 5.15 -3.33) (xy 5.15 3.33) (xy 3.75 3.33) (xy 3.75 3.75) (xy 3.33 3.75) (xy 3.33 5.15) (xy -3.33 5.15) (xy -3.33 3.75) (xy -3.75 3.75) (xy -3.75 3.33) (xy -5.15 3.33))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,141 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "ATMEGA8-16AU" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 22.86 0) (effects (font (size 1.27 1.27))))+    (property "Value" "ATMEGA8-16AU" (at 0 -25.40 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "ATMEGA8-16AU_0_1"+    (rectangle (start -12.70 20.32) (end 12.70 -22.86)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "ATMEGA8-16AU_1_1"+    (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+      (name "PD3 (INT1)" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+      (name "PD4 (XCK/T0)" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 12.70 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 10.16 0) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 7.62 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 5.08 0) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 2.54 0) (length 5.08)+      (name "PB6 (XTAL1/TOSC1)" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at -17.78 0.00 0) (length 5.08)+      (name "PB7 (XTAL2/TOSC2)" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+      (name "PD5 (T1)" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+      (name "PD6 (AIN0)" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "PD7 (AIN1)" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+      (name "PB0 (ICP1)" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+      (name "PB1 (OC1A)" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+      (name "PB2 (SS/OC1B)" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+      (name "PB3 (MOSI/OC2)" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -20.32 0) (length 5.08)+      (name "PB4 (MISO)" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+      (name "PD2 (INT0)" (effects (font (size 1.27 1.27))))+      (number "32" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 15.24 180) (length 5.08)+      (name "PD1 (TXD)" (effects (font (size 1.27 1.27))))+      (number "31" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+      (name "PD0 (RXD)" (effects (font (size 1.27 1.27))))+      (number "30" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 10.16 180) (length 5.08)+      (name "PC6 (RESET)" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+      (name "PC5 (ADC5/SCL)" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "PC4 (ADC4/SDA)" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "PC3 (ADC3)" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+      (name "PC2 (ADC2)" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "PC1 (ADC1)" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "PC0 (ADC0)" (effects (font (size 1.27 1.27))))+      (number "23" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -7.62 180) (length 5.08)+      (name "ADC7" (effects (font (size 1.27 1.27))))+      (number "22" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -10.16 180) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "21" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -12.70 180) (length 5.08)+      (name "AREF" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -15.24 180) (length 5.08)+      (name "ADC6" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -17.78 180) (length 5.08)+      (name "AVCC" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -20.32 180) (length 5.08)+      (name "PB5 (SCK)" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,204 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TQFP-32_7x7mm_P0.8mm">+  <description>TQFP-32, 7 x 7 mm, 0.8 mm pitch</description>+  <smd name="1" x="-4.1625" y="2.8000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="2" x="-4.1625" y="2.0000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="3" x="-4.1625" y="1.2000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="4" x="-4.1625" y="0.4000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="5" x="-4.1625" y="-0.4000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="6" x="-4.1625" y="-1.2000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="7" x="-4.1625" y="-2.0000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="8" x="-4.1625" y="-2.8000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="9" x="-2.8000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="10" x="-2.0000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="11" x="-1.2000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="12" x="-0.4000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="13" x="0.4000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="14" x="1.2000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="15" x="2.0000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="16" x="2.8000" y="-4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="17" x="4.1625" y="-2.8000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="18" x="4.1625" y="-2.0000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="19" x="4.1625" y="-1.2000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="20" x="4.1625" y="-0.4000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="21" x="4.1625" y="0.4000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="22" x="4.1625" y="1.2000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="23" x="4.1625" y="2.0000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="24" x="4.1625" y="2.8000" dx="1.4750" dy="0.5500" layer="1" roundness="50"/>+  <smd name="25" x="2.8000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="26" x="2.0000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="27" x="1.2000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="28" x="0.4000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="29" x="-0.4000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="30" x="-1.2000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="31" x="-2.0000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <smd name="32" x="-2.8000" y="4.1625" dx="0.5500" dy="1.4750" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-4.2500" y="3.3400"/>+    <vertex x="-4.5900" y="3.8100"/>+    <vertex x="-3.9100" y="3.8100"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-2.5000" y="3.5000"/>+    <vertex x="3.5000" y="3.5000"/>+    <vertex x="3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="2.5000"/>+  </polygon>+  <wire x1="-3.6100" y1="3.6100" x2="-3.3350" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="3.3350" x2="-3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="-3.6100" x2="-3.6100" y2="-3.3350" width="0.1200" layer="21"/>+  <wire x1="-3.3350" y1="-3.6100" x2="-3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.3350" y1="3.6100" x2="3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="3.6100" x2="3.6100" y2="3.3350" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.3350" x2="3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.6100" x2="3.3350" y2="-3.6100" width="0.1200" layer="21"/>+  <text x="0" y="5.500" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-5.500" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="ATMEGA8-16AU">+  <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>+  <wire x1="12.7" y1="20.32" x2="12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-22.86" x2="-12.7" y2="20.32" width="0.254" layer="94"/>+  <text x="0.0000" y="22.8600" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-25.4000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="PD3_INT1" x="-17.78" y="17.78" length="middle" direction="io"/>+  <pin name="PD4_XCK/T0" x="-17.78" y="15.24" length="middle" direction="io"/>+  <pin name="GND" x="-17.78" y="12.7" length="middle" direction="pwr"/>+  <pin name="VCC" x="-17.78" y="10.16" length="middle" direction="pwr"/>+  <pin name="GND@2" x="-17.78" y="7.62" length="middle" direction="pwr"/>+  <pin name="VCC@2" x="-17.78" y="5.08" length="middle" direction="pwr"/>+  <pin name="PB6_XTAL1/TOSC1" x="-17.78" y="2.54" length="middle" direction="in"/>+  <pin name="PB7_XTAL2/TOSC2" x="-17.78" y="0" length="middle" direction="out"/>+  <pin name="PD5_T1" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="PD6_AIN0" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="PD7_AIN1" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="PB0_ICP1" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="PB1_OC1A" x="-17.78" y="-12.7" length="middle" direction="io"/>+  <pin name="PB2_SS/OC1B" x="-17.78" y="-15.24" length="middle" direction="io"/>+  <pin name="PB3_MOSI/OC2" x="-17.78" y="-17.78" length="middle" direction="io"/>+  <pin name="PB4_MISO" x="-17.78" y="-20.32" length="middle" direction="io"/>+  <pin name="PD2_INT0" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>+  <pin name="PD1_TXD" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>+  <pin name="PD0_RXD" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="PC6_RESET" x="17.78" y="10.16" length="middle" direction="in" rot="R180"/>+  <pin name="PC5_ADC5/SCL" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PC4_ADC4/SDA" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PC3_ADC3" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PC2_ADC2" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="PC1_ADC1" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PC0_ADC0" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="ADC7" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+  <pin name="GND@3" x="17.78" y="-10.16" length="middle" direction="pwr" rot="R180"/>+  <pin name="AREF" x="17.78" y="-12.7" length="middle" direction="in" rot="R180"/>+  <pin name="ADC6" x="17.78" y="-15.24" length="middle" direction="in" rot="R180"/>+  <pin name="AVCC" x="17.78" y="-17.78" length="middle" direction="pwr" rot="R180"/>+  <pin name="PB5_SCK" x="17.78" y="-20.32" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="ATMEGA8-16AU" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="ATMEGA8-16AU" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="TQFP-32_7x7mm_P0.8mm">+      <connects>+        <connect gate="G$1" pin="PD3_INT1" pad="1"/>+        <connect gate="G$1" pin="PD4_XCK/T0" pad="2"/>+        <connect gate="G$1" pin="GND" pad="3"/>+        <connect gate="G$1" pin="VCC" pad="4"/>+        <connect gate="G$1" pin="GND@2" pad="5"/>+        <connect gate="G$1" pin="VCC@2" pad="6"/>+        <connect gate="G$1" pin="PB6_XTAL1/TOSC1" pad="7"/>+        <connect gate="G$1" pin="PB7_XTAL2/TOSC2" pad="8"/>+        <connect gate="G$1" pin="PD5_T1" pad="9"/>+        <connect gate="G$1" pin="PD6_AIN0" pad="10"/>+        <connect gate="G$1" pin="PD7_AIN1" pad="11"/>+        <connect gate="G$1" pin="PB0_ICP1" pad="12"/>+        <connect gate="G$1" pin="PB1_OC1A" pad="13"/>+        <connect gate="G$1" pin="PB2_SS/OC1B" pad="14"/>+        <connect gate="G$1" pin="PB3_MOSI/OC2" pad="15"/>+        <connect gate="G$1" pin="PB4_MISO" pad="16"/>+        <connect gate="G$1" pin="PD2_INT0" pad="32"/>+        <connect gate="G$1" pin="PD1_TXD" pad="31"/>+        <connect gate="G$1" pin="PD0_RXD" pad="30"/>+        <connect gate="G$1" pin="PC6_RESET" pad="29"/>+        <connect gate="G$1" pin="PC5_ADC5/SCL" pad="28"/>+        <connect gate="G$1" pin="PC4_ADC4/SDA" pad="27"/>+        <connect gate="G$1" pin="PC3_ADC3" pad="26"/>+        <connect gate="G$1" pin="PC2_ADC2" pad="25"/>+        <connect gate="G$1" pin="PC1_ADC1" pad="24"/>+        <connect gate="G$1" pin="PC0_ADC0" pad="23"/>+        <connect gate="G$1" pin="ADC7" pad="22"/>+        <connect gate="G$1" pin="GND@3" pad="21"/>+        <connect gate="G$1" pin="AREF" pad="20"/>+        <connect gate="G$1" pin="ADC6" pad="19"/>+        <connect gate="G$1" pin="AVCC" pad="18"/>+        <connect gate="G$1" pin="PB5_SCK" pad="17"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,10602 @@+ISO-10303-21;+HEADER;+/* TQFP-32_7x7mm_P0.8mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of TQFP-32_7x7mm_P0.8mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'TQFP-32_7x7mm_P0.8mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('TQFP-32_7x7mm_P0.8mm','TQFP-32_7x7mm_P0.8mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#10010);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#114,#140,#195,#249,#274,#287,#309,#322,#344,#357,#379,#392,#414,#427,#449,#462,#484,#497,#519,#552,#572,#656,#693,#730,#794,#813,#831,#858,#938,#954,#1029,#1096,#1106,#1118,#1181,#1248,#1258,#1270,#1333,#1400,#1410,#1422,#1485,#1552,#1562,#1574,#1637,#1704,#1714,#1726,#1789,#1856,#1866,#1878,#1941,#2008,#2018,#2030,#2093,#2160,#2170,#2192,#2212,#2228,#2235,#2260,#2287,#2300,#2322,#2335,#2357,#2370,#2392,#2405,#2427,#2440,#2462,#2475,#2497,#2510,#2532,#2563,#2589,#2626,#2652,#2671,#2675,#2693,#2768,#2845,#2911,#2924,#2935,#2972,#2994,#3007,#3029,#3042,#3064,#3077,#3099,#3112,#3134,#3147,#3169,#3182,#3199,#3209,#3247,#3258,#3268,#3278,#3288,#3298,#3308,#3319,#3328,#3336,#3346,#3356,#3366,#3376,#3386,#3396,#3406,#3415,#3423,#3433,#3443,#3453,#3463,#3473,#3483,#3493,#3502,#3510,#3520,#3530,#3540,#3550,#3560,#3570,#3580,#3589,#3597,#3607,#3617,#3627,#3637,#3647,#3657,#3667,#3676,#3684,#3694,#3704,#3714,#3724,#3734,#3744,#3754,#3763,#3771,#3781,#3791,#3801,#3811,#3821,#3831,#3841,#3850,#3858,#3868,#3878,#3888,#3898,#3908,#3918,#3928,#3937,#3945,#4016,#4083,#4093,#4173,#4183,#4249,#4258,#4321,#4386,#4396,#4405,#4468,#4533,#4543,#4552,#4615,#4680,#4690,#4699,#4762,#4827,#4837,#4846,#4909,#4974,#4984,#4993,#5056,#5121,#5131,#5140,#5203,#5268,#5278,#5302,#5322,#5335,#5341,#5360,#5371,#5381,#5391,#5401,#5411,#5421,#5432,#5442,#5450,#5462,#5483,#5496,#5517,#5530,#5551,#5564,#5585,#5598,#5619,#5632,#5653,#5666,#5687,#5697,#5710,#5721,#5734,#5756,#5814,#5869,#5879,#5937,#5992,#6002,#6060,#6115,#6125,#6183,#6238,#6248,#6306,#6361,#6371,#6429,#6484,#6494,#6552,#6607,#6617,#6628,#6637,#6647,#6657,#6667,#6677,#6688,#6697,#6705,#6714,#6724,#6734,#6744,#6754,#6764,#6774,#6784,#6797,#6819,#6832,#6854,#6867,#6889,#6902,#6924,#6937,#6959,#6972,#6994,#7002,#7012,#7021,#7031,#7041,#7051,#7061,#7071,#7078,#7088,#7097,#7107,#7117,#7127,#7137,#7147,#7154,#7164,#7173,#7183,#7193,#7203,#7213,#7223,#7230,#7240,#7249,#7259,#7269,#7279,#7289,#7299,#7306,#7316,#7325,#7335,#7345,#7355,#7365,#7375,#7382,#7392,#7401,#7411,#7421,#7431,#7441,#7451,#7458,#7468,#7477,#7487,#7497,#7507,#7517,#7527,#7534,#7608,#7675,#7685,#7749,#7759,#7769,#7779,#7789,#7799,#7809,#7819,#7880,#7946,#7956,#7966,#7976,#7986,#7996,#8006,#8016,#8024,#8034,#8044,#8054,#8064,#8074,#8084,#8092,#8102,#8112,#8122,#8132,#8142,#8152,#8160,#8170,#8180,#8190,#8200,#8210,#8220,#8228,#8238,#8248,#8258,#8268,#8278,#8288,#8296,#8306,#8316,#8326,#8336,#8346,#8356,#8364,#8374,#8384,#8394,#8404,#8414,#8424,#8432,#8441,#8504,#8569,#8579,#8588,#8651,#8716,#8726,#8735,#8798,#8863,#8873,#8882,#8945,#9010,#9020,#9029,#9092,#9157,#9167,#9176,#9239,#9304,#9314,#9320,#9331,#9340,#9350,#9360,#9370,#9380,#9391,#9400,#9408,#9418,#9428,#9438,#9448,#9458,#9468,#9478,#9488,#9497,#9507,#9517,#9527,#9537,#9547,#9554,#9564,#9573,#9583,#9593,#9603,#9613,#9623,#9630,#9640,#9649,#9659,#9669,#9679,#9689,#9699,#9706,#9716,#9725,#9735,#9745,#9755,#9765,#9775,#9782,#9792,#9801,#9811,#9821,#9831,#9841,#9851,#9858,#9868,#9877,#9887,#9897,#9907,#9917,#9927,#9934,#9944,#9953,#9963,#9973,#9983,#9993,#10003));+#17=ADVANCED_FACE('',(#18),#113,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#28,#38,#44,#51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(3.2875,3.425,0.65));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(3.243883862813,3.337767725625,1.060395584541));+#26=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#27),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#27=CARTESIAN_POINT('',(3.239674773624,3.329349547248,1.1));+#28=ORIENTED_EDGE('',*,*,#29,.F.);+#29=EDGE_CURVE('',#30,#24,#32,.T.);+#30=VERTEX_POINT('',#31);+#31=CARTESIAN_POINT('',(-3.243883862813,3.337767725625,1.060395584541));+#32=B_SPLINE_CURVE_WITH_KNOTS('',2,(#33,#34,#35,#36,#37),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#33=CARTESIAN_POINT('',(-3.597392929117,3.337767725625,1.060395584541));+#34=CARTESIAN_POINT('',(-3.438778452201,3.337767725625,1.060395584541));+#35=CARTESIAN_POINT('',(1.849879391266E-15,3.337767725625,1.060395584541));+#36=CARTESIAN_POINT('',(3.438778452201,3.337767725625,1.060395584541));+#37=CARTESIAN_POINT('',(3.597392929117,3.337767725625,1.060395584541));+#38=ORIENTED_EDGE('',*,*,#39,.F.);+#39=EDGE_CURVE('',#40,#30,#42,.T.);+#40=VERTEX_POINT('',#41);+#41=CARTESIAN_POINT('',(-3.2875,3.425,0.65));+#42=B_SPLINE_CURVE_WITH_KNOTS('',1,(#41,#43),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=CARTESIAN_POINT('',(-3.239674773624,3.329349547248,1.1));+#44=ORIENTED_EDGE('',*,*,#45,.T.);+#45=EDGE_CURVE('',#40,#46,#48,.T.);+#46=VERTEX_POINT('',#47);+#47=CARTESIAN_POINT('',(-2.985,3.425,0.65));+#48=LINE('',#41,#49);+#49=VECTOR('',#50,1.);+#50=DIRECTION('',(1.,1.110223024625E-16,0.));+#51=ORIENTED_EDGE('',*,*,#52,.T.);+#52=EDGE_CURVE('',#46,#53,#48,.T.);+#53=VERTEX_POINT('',#54);+#54=CARTESIAN_POINT('',(-2.615,3.425,0.65));+#55=ORIENTED_EDGE('',*,*,#56,.T.);+#56=EDGE_CURVE('',#53,#57,#48,.T.);+#57=VERTEX_POINT('',#58);+#58=CARTESIAN_POINT('',(-2.185,3.425,0.65));+#59=ORIENTED_EDGE('',*,*,#60,.T.);+#60=EDGE_CURVE('',#57,#61,#48,.T.);+#61=VERTEX_POINT('',#62);+#62=CARTESIAN_POINT('',(-1.815,3.425,0.65));+#63=ORIENTED_EDGE('',*,*,#64,.T.);+#64=EDGE_CURVE('',#61,#65,#48,.T.);+#65=VERTEX_POINT('',#66);+#66=CARTESIAN_POINT('',(-1.385,3.425,0.65));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#65,#69,#48,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-1.015,3.425,0.65));+#71=ORIENTED_EDGE('',*,*,#72,.T.);+#72=EDGE_CURVE('',#69,#73,#48,.T.);+#73=VERTEX_POINT('',#74);+#74=CARTESIAN_POINT('',(-0.585,3.425,0.65));+#75=ORIENTED_EDGE('',*,*,#76,.T.);+#76=EDGE_CURVE('',#73,#77,#48,.T.);+#77=VERTEX_POINT('',#78);+#78=CARTESIAN_POINT('',(-0.215,3.425,0.65));+#79=ORIENTED_EDGE('',*,*,#80,.T.);+#80=EDGE_CURVE('',#77,#81,#48,.T.);+#81=VERTEX_POINT('',#82);+#82=CARTESIAN_POINT('',(0.215,3.425,0.65));+#83=ORIENTED_EDGE('',*,*,#84,.T.);+#84=EDGE_CURVE('',#81,#85,#48,.T.);+#85=VERTEX_POINT('',#86);+#86=CARTESIAN_POINT('',(0.585,3.425,0.65));+#87=ORIENTED_EDGE('',*,*,#88,.T.);+#88=EDGE_CURVE('',#85,#89,#48,.T.);+#89=VERTEX_POINT('',#90);+#90=CARTESIAN_POINT('',(1.015,3.425,0.65));+#91=ORIENTED_EDGE('',*,*,#92,.T.);+#92=EDGE_CURVE('',#89,#93,#48,.T.);+#93=VERTEX_POINT('',#94);+#94=CARTESIAN_POINT('',(1.385,3.425,0.65));+#95=ORIENTED_EDGE('',*,*,#96,.T.);+#96=EDGE_CURVE('',#93,#97,#48,.T.);+#97=VERTEX_POINT('',#98);+#98=CARTESIAN_POINT('',(1.815,3.425,0.65));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#97,#101,#48,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(2.185,3.425,0.65));+#103=ORIENTED_EDGE('',*,*,#104,.T.);+#104=EDGE_CURVE('',#101,#105,#48,.T.);+#105=VERTEX_POINT('',#106);+#106=CARTESIAN_POINT('',(2.615,3.425,0.65));+#107=ORIENTED_EDGE('',*,*,#108,.T.);+#108=EDGE_CURVE('',#105,#109,#48,.T.);+#109=VERTEX_POINT('',#110);+#110=CARTESIAN_POINT('',(2.985,3.425,0.65));+#111=ORIENTED_EDGE('',*,*,#112,.T.);+#112=EDGE_CURVE('',#109,#22,#48,.T.);+#113=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#41,#43),(#23,#27)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#114=ADVANCED_FACE('',(#115),#139,.F.);+#115=FACE_BOUND('',#116,.F.);+#116=EDGE_LOOP('',(#117,#125,#133,#134));+#117=ORIENTED_EDGE('',*,*,#118,.T.);+#118=EDGE_CURVE('',#119,#121,#123,.T.);+#119=VERTEX_POINT('',#120);+#120=CARTESIAN_POINT('',(3.425,3.2875,0.65));+#121=VERTEX_POINT('',#122);+#122=CARTESIAN_POINT('',(3.3376399943,3.24381999715,1.060996513181));+#123=B_SPLINE_CURVE_WITH_KNOTS('',1,(#120,#124),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#124=CARTESIAN_POINT('',(3.329349547248,3.239674773624,1.1));+#125=ORIENTED_EDGE('',*,*,#126,.F.);+#126=EDGE_CURVE('',#24,#121,#127,.T.);+#127=B_SPLINE_CURVE_WITH_KNOTS('',2,(#128,#129,#130,#131,#132),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#128=CARTESIAN_POINT('',(3.130758682288,3.450701309162,1.060996513181));+#129=CARTESIAN_POINT('',(3.174189720907,3.407270270542,1.060996513181));+#130=CARTESIAN_POINT('',(3.290729995725,3.290729995725,1.060996513181));+#131=CARTESIAN_POINT('',(3.407270270542,3.174189720907,1.060996513181));+#132=CARTESIAN_POINT('',(3.450701309162,3.130758682288,1.060996513181));+#133=ORIENTED_EDGE('',*,*,#21,.F.);+#134=ORIENTED_EDGE('',*,*,#135,.T.);+#135=EDGE_CURVE('',#22,#119,#136,.T.);+#136=LINE('',#23,#137);+#137=VECTOR('',#138,1.);+#138=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#139=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#27),(#120,#124)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#140=ADVANCED_FACE('',(#141),#189,.T.);+#141=FACE_BOUND('',#142,.T.);+#142=EDGE_LOOP('',(#143,#162,#172,#28));+#143=ORIENTED_EDGE('',*,*,#144,.T.);+#144=EDGE_CURVE('',#30,#145,#147,.T.);+#145=VERTEX_POINT('',#146);+#146=CARTESIAN_POINT('',(-3.223620276513,3.288860345589,1.1));+#147=B_SPLINE_CURVE_WITH_KNOTS('',7,(#148,#149,#150,#151,#152,#153,#154,#155,#156,#157,#158,#159,#160,#161),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.286681552728,1.),.UNSPECIFIED.);+#148=CARTESIAN_POINT('',(-3.243823866033,3.337636125417,1.060996513181));+#149=CARTESIAN_POINT('',(-3.243590354488,3.337072378679,1.063497050063));+#150=CARTESIAN_POINT('',(-3.243290060371,3.336347404548,1.066015748327));+#151=CARTESIAN_POINT('',(-3.242919620687,3.33545308404,1.068536093722));+#152=CARTESIAN_POINT('',(-3.242476816019,3.334384059005,1.071038720499));+#153=CARTESIAN_POINT('',(-3.241960849015,3.333138404465,1.073502508088));+#154=CARTESIAN_POINT('',(-3.241372622876,3.331718300944,1.075905677782));+#155=CARTESIAN_POINT('',(-3.239078777948,3.326180469407,1.084002507176));+#156=CARTESIAN_POINT('',(-3.237012894266,3.321192985446,1.089270513692));+#157=CARTESIAN_POINT('',(-3.234560817847,3.315273147265,1.093707686532));+#158=CARTESIAN_POINT('',(-3.231834076556,3.308690215723,1.097002219095));+#159=CARTESIAN_POINT('',(-3.229019288325,3.301894710567,1.099057933665));+#160=CARTESIAN_POINT('',(-3.226250672934,3.295210685754,1.100000213131));+#161=CARTESIAN_POINT('',(-3.2236202767,3.288860345589,1.1));+#162=ORIENTED_EDGE('',*,*,#163,.T.);+#163=EDGE_CURVE('',#145,#164,#166,.T.);+#164=VERTEX_POINT('',#165);+#165=CARTESIAN_POINT('',(3.223620276513,3.288860345589,1.1));+#166=B_SPLINE_CURVE_WITH_KNOTS('',2,(#167,#168,#169,#170,#171),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#167=CARTESIAN_POINT('',(-3.597392929117,3.288860345589,1.1));+#168=CARTESIAN_POINT('',(-3.438778452201,3.288860345589,1.1));+#169=CARTESIAN_POINT('',(1.855309201205E-15,3.288860345589,1.1));+#170=CARTESIAN_POINT('',(3.438778452201,3.288860345589,1.1));+#171=CARTESIAN_POINT('',(3.597392929117,3.288860345589,1.1));+#172=ORIENTED_EDGE('',*,*,#173,.F.);+#173=EDGE_CURVE('',#24,#164,#174,.T.);+#174=B_SPLINE_CURVE_WITH_KNOTS('',7,(#175,#176,#177,#178,#179,#180,#181,#182,#183,#184,#185,#186,#187,#188),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.289168780874,1.),.UNSPECIFIED.);+#175=CARTESIAN_POINT('',(3.243823866033,3.337636125417,1.060996513181));+#176=CARTESIAN_POINT('',(3.243588328558,3.337067487652,1.063518744543));+#177=CARTESIAN_POINT('',(3.243284845367,3.336334814415,1.066059452332));+#178=CARTESIAN_POINT('',(3.242909963205,3.335429768817,1.068601692902));+#179=CARTESIAN_POINT('',(3.242461415505,3.334346878875,1.071125564715));+#180=CARTESIAN_POINT('',(3.241938410917,3.333084234106,1.073609358161));+#181=CARTESIAN_POINT('',(3.241341921848,3.331644182106,1.076030705385));+#182=CARTESIAN_POINT('',(3.239035487356,3.326075956674,1.084112576185));+#183=CARTESIAN_POINT('',(3.236970110629,3.32108969644,1.089347702233));+#184=CARTESIAN_POINT('',(3.234522780613,3.315181317867,1.093753597325));+#185=CARTESIAN_POINT('',(3.231804634554,3.30861913543,1.097023634859));+#186=CARTESIAN_POINT('',(3.228999981841,3.30184810156,1.099064519351));+#187=CARTESIAN_POINT('',(3.226241501592,3.295188543631,1.100000205221));+#188=CARTESIAN_POINT('',(3.22362027663,3.288860345589,1.1));+#189=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#33,#34,#35,#36,#37),(#190,#191,#192,#193,#194),(#167,#168,#169,#170,#171)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,6.560327950568),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#190=CARTESIAN_POINT('',(-3.597392929117,3.329349547248,1.1));+#191=CARTESIAN_POINT('',(-3.438778452201,3.329349547248,1.1));+#192=CARTESIAN_POINT('',(1.344676064215E-15,3.329349547248,1.1));+#193=CARTESIAN_POINT('',(3.438778452201,3.329349547248,1.1));+#194=CARTESIAN_POINT('',(3.597392929117,3.329349547248,1.1));+#195=ADVANCED_FACE('',(#196),#244,.F.);+#196=FACE_BOUND('',#197,.F.);+#197=EDGE_LOOP('',(#198,#207,#212,#218,#219,#224,#232,#240));+#198=ORIENTED_EDGE('',*,*,#199,.T.);+#199=EDGE_CURVE('',#200,#202,#204,.T.);+#200=VERTEX_POINT('',#201);+#201=CARTESIAN_POINT('',(-3.5,3.325,0.65));+#202=VERTEX_POINT('',#203);+#203=CARTESIAN_POINT('',(-3.325,3.5,0.65));+#204=LINE('',#201,#205);+#205=VECTOR('',#206,1.);+#206=DIRECTION('',(0.707106781187,0.707106781187,0.));+#207=ORIENTED_EDGE('',*,*,#208,.T.);+#208=EDGE_CURVE('',#202,#209,#211,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(-2.985,3.5,0.65));+#211=LINE('',#203,#49);+#212=ORIENTED_EDGE('',*,*,#213,.T.);+#213=EDGE_CURVE('',#209,#46,#214,.T.);+#214=LINE('',#215,#216);+#215=CARTESIAN_POINT('',(-2.985,3.7,0.65));+#216=VECTOR('',#217,1.);+#217=DIRECTION('',(0.,-1.,0.));+#218=ORIENTED_EDGE('',*,*,#45,.F.);+#219=ORIENTED_EDGE('',*,*,#220,.F.);+#220=EDGE_CURVE('',#221,#40,#223,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(-3.425,3.2875,0.65));+#223=LINE('',#222,#205);+#224=ORIENTED_EDGE('',*,*,#225,.F.);+#225=EDGE_CURVE('',#226,#221,#228,.T.);+#226=VERTEX_POINT('',#227);+#227=CARTESIAN_POINT('',(-3.425,2.985,0.65));+#228=LINE('',#229,#230);+#229=CARTESIAN_POINT('',(-3.425,-3.2875,0.65));+#230=VECTOR('',#231,1.);+#231=DIRECTION('',(-1.110223024625E-16,1.,0.));+#232=ORIENTED_EDGE('',*,*,#233,.F.);+#233=EDGE_CURVE('',#234,#226,#236,.T.);+#234=VERTEX_POINT('',#235);+#235=CARTESIAN_POINT('',(-3.5,2.985,0.65));+#236=LINE('',#237,#238);+#237=CARTESIAN_POINT('',(-3.7,2.985,0.65));+#238=VECTOR('',#239,1.);+#239=DIRECTION('',(1.,-1.144237745222E-17,0.));+#240=ORIENTED_EDGE('',*,*,#241,.T.);+#241=EDGE_CURVE('',#234,#200,#242,.T.);+#242=LINE('',#243,#230);+#243=CARTESIAN_POINT('',(-3.5,-3.325,0.65));+#244=PLANE('',#245);+#245=AXIS2_PLACEMENT_3D('',#246,#247,#248);+#246=CARTESIAN_POINT('',(-5.67922660231E-16,3.4625,0.65));+#247=DIRECTION('',(3.052644763437E-18,8.495500553818E-28,-1.));+#248=DIRECTION('',(1.,1.177642739465E-16,3.052644763437E-18));+#249=ADVANCED_FACE('',(#250),#271,.F.);+#250=FACE_BOUND('',#251,.F.);+#251=EDGE_LOOP('',(#252,#255,#262,#267,#269,#270));+#252=ORIENTED_EDGE('',*,*,#253,.F.);+#253=EDGE_CURVE('',#254,#209,#214,.T.);+#254=VERTEX_POINT('',#215);+#255=ORIENTED_EDGE('',*,*,#256,.T.);+#256=EDGE_CURVE('',#254,#257,#259,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(-2.615,3.7,0.65));+#259=LINE('',#215,#260);+#260=VECTOR('',#261,1.);+#261=DIRECTION('',(1.,0.,0.));+#262=ORIENTED_EDGE('',*,*,#263,.T.);+#263=EDGE_CURVE('',#257,#264,#266,.T.);+#264=VERTEX_POINT('',#265);+#265=CARTESIAN_POINT('',(-2.615,3.5,0.65));+#266=LINE('',#258,#216);+#267=ORIENTED_EDGE('',*,*,#268,.T.);+#268=EDGE_CURVE('',#264,#53,#266,.T.);+#269=ORIENTED_EDGE('',*,*,#52,.F.);+#270=ORIENTED_EDGE('',*,*,#213,.F.);+#271=PLANE('',#272);+#272=AXIS2_PLACEMENT_3D('',#215,#273,#217);+#273=DIRECTION('',(0.,0.,-1.));+#274=ADVANCED_FACE('',(#275),#244,.F.);+#275=FACE_BOUND('',#276,.F.);+#276=EDGE_LOOP('',(#277,#278,#282,#286));+#277=ORIENTED_EDGE('',*,*,#268,.F.);+#278=ORIENTED_EDGE('',*,*,#279,.T.);+#279=EDGE_CURVE('',#264,#280,#211,.T.);+#280=VERTEX_POINT('',#281);+#281=CARTESIAN_POINT('',(-2.185,3.5,0.65));+#282=ORIENTED_EDGE('',*,*,#283,.T.);+#283=EDGE_CURVE('',#280,#57,#284,.T.);+#284=LINE('',#285,#216);+#285=CARTESIAN_POINT('',(-2.185,3.7,0.65));+#286=ORIENTED_EDGE('',*,*,#56,.F.);+#287=ADVANCED_FACE('',(#288),#307,.F.);+#288=FACE_BOUND('',#289,.F.);+#289=EDGE_LOOP('',(#290,#293,#298,#303,#305,#306));+#290=ORIENTED_EDGE('',*,*,#291,.F.);+#291=EDGE_CURVE('',#292,#280,#284,.T.);+#292=VERTEX_POINT('',#285);+#293=ORIENTED_EDGE('',*,*,#294,.T.);+#294=EDGE_CURVE('',#292,#295,#297,.T.);+#295=VERTEX_POINT('',#296);+#296=CARTESIAN_POINT('',(-1.815,3.7,0.65));+#297=LINE('',#285,#260);+#298=ORIENTED_EDGE('',*,*,#299,.T.);+#299=EDGE_CURVE('',#295,#300,#302,.T.);+#300=VERTEX_POINT('',#301);+#301=CARTESIAN_POINT('',(-1.815,3.5,0.65));+#302=LINE('',#296,#216);+#303=ORIENTED_EDGE('',*,*,#304,.T.);+#304=EDGE_CURVE('',#300,#61,#302,.T.);+#305=ORIENTED_EDGE('',*,*,#60,.F.);+#306=ORIENTED_EDGE('',*,*,#283,.F.);+#307=PLANE('',#308);+#308=AXIS2_PLACEMENT_3D('',#285,#273,#217);+#309=ADVANCED_FACE('',(#310),#244,.F.);+#310=FACE_BOUND('',#311,.F.);+#311=EDGE_LOOP('',(#312,#313,#317,#321));+#312=ORIENTED_EDGE('',*,*,#304,.F.);+#313=ORIENTED_EDGE('',*,*,#314,.T.);+#314=EDGE_CURVE('',#300,#315,#211,.T.);+#315=VERTEX_POINT('',#316);+#316=CARTESIAN_POINT('',(-1.385,3.5,0.65));+#317=ORIENTED_EDGE('',*,*,#318,.T.);+#318=EDGE_CURVE('',#315,#65,#319,.T.);+#319=LINE('',#320,#216);+#320=CARTESIAN_POINT('',(-1.385,3.7,0.65));+#321=ORIENTED_EDGE('',*,*,#64,.F.);+#322=ADVANCED_FACE('',(#323),#342,.F.);+#323=FACE_BOUND('',#324,.F.);+#324=EDGE_LOOP('',(#325,#328,#333,#338,#340,#341));+#325=ORIENTED_EDGE('',*,*,#326,.F.);+#326=EDGE_CURVE('',#327,#315,#319,.T.);+#327=VERTEX_POINT('',#320);+#328=ORIENTED_EDGE('',*,*,#329,.T.);+#329=EDGE_CURVE('',#327,#330,#332,.T.);+#330=VERTEX_POINT('',#331);+#331=CARTESIAN_POINT('',(-1.015,3.7,0.65));+#332=LINE('',#320,#260);+#333=ORIENTED_EDGE('',*,*,#334,.T.);+#334=EDGE_CURVE('',#330,#335,#337,.T.);+#335=VERTEX_POINT('',#336);+#336=CARTESIAN_POINT('',(-1.015,3.5,0.65));+#337=LINE('',#331,#216);+#338=ORIENTED_EDGE('',*,*,#339,.T.);+#339=EDGE_CURVE('',#335,#69,#337,.T.);+#340=ORIENTED_EDGE('',*,*,#68,.F.);+#341=ORIENTED_EDGE('',*,*,#318,.F.);+#342=PLANE('',#343);+#343=AXIS2_PLACEMENT_3D('',#320,#273,#217);+#344=ADVANCED_FACE('',(#345),#244,.F.);+#345=FACE_BOUND('',#346,.F.);+#346=EDGE_LOOP('',(#347,#348,#352,#356));+#347=ORIENTED_EDGE('',*,*,#339,.F.);+#348=ORIENTED_EDGE('',*,*,#349,.T.);+#349=EDGE_CURVE('',#335,#350,#211,.T.);+#350=VERTEX_POINT('',#351);+#351=CARTESIAN_POINT('',(-0.585,3.5,0.65));+#352=ORIENTED_EDGE('',*,*,#353,.T.);+#353=EDGE_CURVE('',#350,#73,#354,.T.);+#354=LINE('',#355,#216);+#355=CARTESIAN_POINT('',(-0.585,3.7,0.65));+#356=ORIENTED_EDGE('',*,*,#72,.F.);+#357=ADVANCED_FACE('',(#358),#377,.F.);+#358=FACE_BOUND('',#359,.F.);+#359=EDGE_LOOP('',(#360,#363,#368,#373,#375,#376));+#360=ORIENTED_EDGE('',*,*,#361,.F.);+#361=EDGE_CURVE('',#362,#350,#354,.T.);+#362=VERTEX_POINT('',#355);+#363=ORIENTED_EDGE('',*,*,#364,.T.);+#364=EDGE_CURVE('',#362,#365,#367,.T.);+#365=VERTEX_POINT('',#366);+#366=CARTESIAN_POINT('',(-0.215,3.7,0.65));+#367=LINE('',#355,#260);+#368=ORIENTED_EDGE('',*,*,#369,.T.);+#369=EDGE_CURVE('',#365,#370,#372,.T.);+#370=VERTEX_POINT('',#371);+#371=CARTESIAN_POINT('',(-0.215,3.5,0.65));+#372=LINE('',#366,#216);+#373=ORIENTED_EDGE('',*,*,#374,.T.);+#374=EDGE_CURVE('',#370,#77,#372,.T.);+#375=ORIENTED_EDGE('',*,*,#76,.F.);+#376=ORIENTED_EDGE('',*,*,#353,.F.);+#377=PLANE('',#378);+#378=AXIS2_PLACEMENT_3D('',#355,#273,#217);+#379=ADVANCED_FACE('',(#380),#244,.F.);+#380=FACE_BOUND('',#381,.F.);+#381=EDGE_LOOP('',(#382,#383,#387,#391));+#382=ORIENTED_EDGE('',*,*,#374,.F.);+#383=ORIENTED_EDGE('',*,*,#384,.T.);+#384=EDGE_CURVE('',#370,#385,#211,.T.);+#385=VERTEX_POINT('',#386);+#386=CARTESIAN_POINT('',(0.215,3.5,0.65));+#387=ORIENTED_EDGE('',*,*,#388,.T.);+#388=EDGE_CURVE('',#385,#81,#389,.T.);+#389=LINE('',#390,#216);+#390=CARTESIAN_POINT('',(0.215,3.7,0.65));+#391=ORIENTED_EDGE('',*,*,#80,.F.);+#392=ADVANCED_FACE('',(#393),#412,.F.);+#393=FACE_BOUND('',#394,.F.);+#394=EDGE_LOOP('',(#395,#398,#403,#408,#410,#411));+#395=ORIENTED_EDGE('',*,*,#396,.F.);+#396=EDGE_CURVE('',#397,#385,#389,.T.);+#397=VERTEX_POINT('',#390);+#398=ORIENTED_EDGE('',*,*,#399,.T.);+#399=EDGE_CURVE('',#397,#400,#402,.T.);+#400=VERTEX_POINT('',#401);+#401=CARTESIAN_POINT('',(0.585,3.7,0.65));+#402=LINE('',#390,#260);+#403=ORIENTED_EDGE('',*,*,#404,.T.);+#404=EDGE_CURVE('',#400,#405,#407,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(0.585,3.5,0.65));+#407=LINE('',#401,#216);+#408=ORIENTED_EDGE('',*,*,#409,.T.);+#409=EDGE_CURVE('',#405,#85,#407,.T.);+#410=ORIENTED_EDGE('',*,*,#84,.F.);+#411=ORIENTED_EDGE('',*,*,#388,.F.);+#412=PLANE('',#413);+#413=AXIS2_PLACEMENT_3D('',#390,#273,#217);+#414=ADVANCED_FACE('',(#415),#244,.F.);+#415=FACE_BOUND('',#416,.F.);+#416=EDGE_LOOP('',(#417,#418,#422,#426));+#417=ORIENTED_EDGE('',*,*,#409,.F.);+#418=ORIENTED_EDGE('',*,*,#419,.T.);+#419=EDGE_CURVE('',#405,#420,#211,.T.);+#420=VERTEX_POINT('',#421);+#421=CARTESIAN_POINT('',(1.015,3.5,0.65));+#422=ORIENTED_EDGE('',*,*,#423,.T.);+#423=EDGE_CURVE('',#420,#89,#424,.T.);+#424=LINE('',#425,#216);+#425=CARTESIAN_POINT('',(1.015,3.7,0.65));+#426=ORIENTED_EDGE('',*,*,#88,.F.);+#427=ADVANCED_FACE('',(#428),#447,.F.);+#428=FACE_BOUND('',#429,.F.);+#429=EDGE_LOOP('',(#430,#433,#438,#443,#445,#446));+#430=ORIENTED_EDGE('',*,*,#431,.F.);+#431=EDGE_CURVE('',#432,#420,#424,.T.);+#432=VERTEX_POINT('',#425);+#433=ORIENTED_EDGE('',*,*,#434,.T.);+#434=EDGE_CURVE('',#432,#435,#437,.T.);+#435=VERTEX_POINT('',#436);+#436=CARTESIAN_POINT('',(1.385,3.7,0.65));+#437=LINE('',#425,#260);+#438=ORIENTED_EDGE('',*,*,#439,.T.);+#439=EDGE_CURVE('',#435,#440,#442,.T.);+#440=VERTEX_POINT('',#441);+#441=CARTESIAN_POINT('',(1.385,3.5,0.65));+#442=LINE('',#436,#216);+#443=ORIENTED_EDGE('',*,*,#444,.T.);+#444=EDGE_CURVE('',#440,#93,#442,.T.);+#445=ORIENTED_EDGE('',*,*,#92,.F.);+#446=ORIENTED_EDGE('',*,*,#423,.F.);+#447=PLANE('',#448);+#448=AXIS2_PLACEMENT_3D('',#425,#273,#217);+#449=ADVANCED_FACE('',(#450),#244,.F.);+#450=FACE_BOUND('',#451,.F.);+#451=EDGE_LOOP('',(#452,#453,#457,#461));+#452=ORIENTED_EDGE('',*,*,#444,.F.);+#453=ORIENTED_EDGE('',*,*,#454,.T.);+#454=EDGE_CURVE('',#440,#455,#211,.T.);+#455=VERTEX_POINT('',#456);+#456=CARTESIAN_POINT('',(1.815,3.5,0.65));+#457=ORIENTED_EDGE('',*,*,#458,.T.);+#458=EDGE_CURVE('',#455,#97,#459,.T.);+#459=LINE('',#460,#216);+#460=CARTESIAN_POINT('',(1.815,3.7,0.65));+#461=ORIENTED_EDGE('',*,*,#96,.F.);+#462=ADVANCED_FACE('',(#463),#482,.F.);+#463=FACE_BOUND('',#464,.F.);+#464=EDGE_LOOP('',(#465,#468,#473,#478,#480,#481));+#465=ORIENTED_EDGE('',*,*,#466,.F.);+#466=EDGE_CURVE('',#467,#455,#459,.T.);+#467=VERTEX_POINT('',#460);+#468=ORIENTED_EDGE('',*,*,#469,.T.);+#469=EDGE_CURVE('',#467,#470,#472,.T.);+#470=VERTEX_POINT('',#471);+#471=CARTESIAN_POINT('',(2.185,3.7,0.65));+#472=LINE('',#460,#260);+#473=ORIENTED_EDGE('',*,*,#474,.T.);+#474=EDGE_CURVE('',#470,#475,#477,.T.);+#475=VERTEX_POINT('',#476);+#476=CARTESIAN_POINT('',(2.185,3.5,0.65));+#477=LINE('',#471,#216);+#478=ORIENTED_EDGE('',*,*,#479,.T.);+#479=EDGE_CURVE('',#475,#101,#477,.T.);+#480=ORIENTED_EDGE('',*,*,#100,.F.);+#481=ORIENTED_EDGE('',*,*,#458,.F.);+#482=PLANE('',#483);+#483=AXIS2_PLACEMENT_3D('',#460,#273,#217);+#484=ADVANCED_FACE('',(#485),#244,.F.);+#485=FACE_BOUND('',#486,.F.);+#486=EDGE_LOOP('',(#487,#488,#492,#496));+#487=ORIENTED_EDGE('',*,*,#479,.F.);+#488=ORIENTED_EDGE('',*,*,#489,.T.);+#489=EDGE_CURVE('',#475,#490,#211,.T.);+#490=VERTEX_POINT('',#491);+#491=CARTESIAN_POINT('',(2.615,3.5,0.65));+#492=ORIENTED_EDGE('',*,*,#493,.T.);+#493=EDGE_CURVE('',#490,#105,#494,.T.);+#494=LINE('',#495,#216);+#495=CARTESIAN_POINT('',(2.615,3.7,0.65));+#496=ORIENTED_EDGE('',*,*,#104,.F.);+#497=ADVANCED_FACE('',(#498),#517,.F.);+#498=FACE_BOUND('',#499,.F.);+#499=EDGE_LOOP('',(#500,#503,#508,#513,#515,#516));+#500=ORIENTED_EDGE('',*,*,#501,.F.);+#501=EDGE_CURVE('',#502,#490,#494,.T.);+#502=VERTEX_POINT('',#495);+#503=ORIENTED_EDGE('',*,*,#504,.T.);+#504=EDGE_CURVE('',#502,#505,#507,.T.);+#505=VERTEX_POINT('',#506);+#506=CARTESIAN_POINT('',(2.985,3.7,0.65));+#507=LINE('',#495,#260);+#508=ORIENTED_EDGE('',*,*,#509,.T.);+#509=EDGE_CURVE('',#505,#510,#512,.T.);+#510=VERTEX_POINT('',#511);+#511=CARTESIAN_POINT('',(2.985,3.5,0.65));+#512=LINE('',#506,#216);+#513=ORIENTED_EDGE('',*,*,#514,.T.);+#514=EDGE_CURVE('',#510,#109,#512,.T.);+#515=ORIENTED_EDGE('',*,*,#108,.F.);+#516=ORIENTED_EDGE('',*,*,#493,.F.);+#517=PLANE('',#518);+#518=AXIS2_PLACEMENT_3D('',#495,#273,#217);+#519=ADVANCED_FACE('',(#520),#244,.F.);+#520=FACE_BOUND('',#521,.F.);+#521=EDGE_LOOP('',(#522,#523,#527,#532,#539,#547,#550,#551));+#522=ORIENTED_EDGE('',*,*,#514,.F.);+#523=ORIENTED_EDGE('',*,*,#524,.T.);+#524=EDGE_CURVE('',#510,#525,#211,.T.);+#525=VERTEX_POINT('',#526);+#526=CARTESIAN_POINT('',(3.325,3.5,0.65));+#527=ORIENTED_EDGE('',*,*,#528,.T.);+#528=EDGE_CURVE('',#525,#529,#531,.T.);+#529=VERTEX_POINT('',#530);+#530=CARTESIAN_POINT('',(3.5,3.325,0.65));+#531=LINE('',#526,#137);+#532=ORIENTED_EDGE('',*,*,#533,.T.);+#533=EDGE_CURVE('',#529,#534,#536,.T.);+#534=VERTEX_POINT('',#535);+#535=CARTESIAN_POINT('',(3.5,2.985,0.65));+#536=LINE('',#530,#537);+#537=VECTOR('',#538,1.);+#538=DIRECTION('',(1.110223024625E-16,-1.,0.));+#539=ORIENTED_EDGE('',*,*,#540,.T.);+#540=EDGE_CURVE('',#534,#541,#543,.T.);+#541=VERTEX_POINT('',#542);+#542=CARTESIAN_POINT('',(3.425,2.985,0.65));+#543=LINE('',#544,#545);+#544=CARTESIAN_POINT('',(3.7,2.985,0.65));+#545=VECTOR('',#546,1.);+#546=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#547=ORIENTED_EDGE('',*,*,#548,.F.);+#548=EDGE_CURVE('',#119,#541,#549,.T.);+#549=LINE('',#120,#537);+#550=ORIENTED_EDGE('',*,*,#135,.F.);+#551=ORIENTED_EDGE('',*,*,#112,.F.);+#552=ADVANCED_FACE('',(#553),#571,.F.);+#553=FACE_BOUND('',#554,.F.);+#554=EDGE_LOOP('',(#555,#556,#566,#570));+#555=ORIENTED_EDGE('',*,*,#39,.T.);+#556=ORIENTED_EDGE('',*,*,#557,.F.);+#557=EDGE_CURVE('',#558,#30,#560,.T.);+#558=VERTEX_POINT('',#559);+#559=CARTESIAN_POINT('',(-3.337767725625,3.243883862813,1.060395584541));+#560=B_SPLINE_CURVE_WITH_KNOTS('',2,(#561,#562,#563,#564,#565),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#561=CARTESIAN_POINT('',(-3.450701309162,3.130758682288,1.060996513181));+#562=CARTESIAN_POINT('',(-3.407270270542,3.174189720907,1.060996513181));+#563=CARTESIAN_POINT('',(-3.290729995725,3.290729995725,1.060996513181));+#564=CARTESIAN_POINT('',(-3.174189720907,3.407270270542,1.060996513181));+#565=CARTESIAN_POINT('',(-3.130758682288,3.450701309162,1.060996513181));+#566=ORIENTED_EDGE('',*,*,#567,.F.);+#567=EDGE_CURVE('',#221,#558,#568,.T.);+#568=B_SPLINE_CURVE_WITH_KNOTS('',1,(#222,#569),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#569=CARTESIAN_POINT('',(-3.329349547248,3.239674773624,1.1));+#570=ORIENTED_EDGE('',*,*,#220,.T.);+#571=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#222,#569),(#41,#43)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#572=ADVANCED_FACE('',(#573),#655,.F.);+#573=FACE_BOUND('',#574,.F.);+#574=EDGE_LOOP('',(#575,#583,#591,#592,#593,#597,#601,#605,#609,#613,#617,#621,#625,#629,#633,#637,#641,#645,#649,#653));+#575=ORIENTED_EDGE('',*,*,#576,.T.);+#576=EDGE_CURVE('',#577,#579,#581,.T.);+#577=VERTEX_POINT('',#578);+#578=CARTESIAN_POINT('',(3.425,-3.2875,0.65));+#579=VERTEX_POINT('',#580);+#580=CARTESIAN_POINT('',(3.337767725625,-3.243883862813,1.060395584541));+#581=B_SPLINE_CURVE_WITH_KNOTS('',1,(#578,#582),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#582=CARTESIAN_POINT('',(3.329349547248,-3.239674773624,1.1));+#583=ORIENTED_EDGE('',*,*,#584,.F.);+#584=EDGE_CURVE('',#121,#579,#585,.T.);+#585=B_SPLINE_CURVE_WITH_KNOTS('',2,(#586,#587,#588,#589,#590),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#586=CARTESIAN_POINT('',(3.337767725625,3.597392929117,1.060395584541));+#587=CARTESIAN_POINT('',(3.337767725625,3.438778452201,1.060395584541));+#588=CARTESIAN_POINT('',(3.337767725625,-1.405790181416E-15,1.060395584541));+#589=CARTESIAN_POINT('',(3.337767725625,-3.438778452201,1.060395584541));+#590=CARTESIAN_POINT('',(3.337767725625,-3.597392929117,1.060395584541));+#591=ORIENTED_EDGE('',*,*,#118,.F.);+#592=ORIENTED_EDGE('',*,*,#548,.T.);+#593=ORIENTED_EDGE('',*,*,#594,.T.);+#594=EDGE_CURVE('',#541,#595,#549,.T.);+#595=VERTEX_POINT('',#596);+#596=CARTESIAN_POINT('',(3.425,2.615,0.65));+#597=ORIENTED_EDGE('',*,*,#598,.T.);+#598=EDGE_CURVE('',#595,#599,#549,.T.);+#599=VERTEX_POINT('',#600);+#600=CARTESIAN_POINT('',(3.425,2.185,0.65));+#601=ORIENTED_EDGE('',*,*,#602,.T.);+#602=EDGE_CURVE('',#599,#603,#549,.T.);+#603=VERTEX_POINT('',#604);+#604=CARTESIAN_POINT('',(3.425,1.815,0.65));+#605=ORIENTED_EDGE('',*,*,#606,.T.);+#606=EDGE_CURVE('',#603,#607,#549,.T.);+#607=VERTEX_POINT('',#608);+#608=CARTESIAN_POINT('',(3.425,1.385,0.65));+#609=ORIENTED_EDGE('',*,*,#610,.T.);+#610=EDGE_CURVE('',#607,#611,#549,.T.);+#611=VERTEX_POINT('',#612);+#612=CARTESIAN_POINT('',(3.425,1.015,0.65));+#613=ORIENTED_EDGE('',*,*,#614,.T.);+#614=EDGE_CURVE('',#611,#615,#549,.T.);+#615=VERTEX_POINT('',#616);+#616=CARTESIAN_POINT('',(3.425,0.585,0.65));+#617=ORIENTED_EDGE('',*,*,#618,.T.);+#618=EDGE_CURVE('',#615,#619,#549,.T.);+#619=VERTEX_POINT('',#620);+#620=CARTESIAN_POINT('',(3.425,0.215,0.65));+#621=ORIENTED_EDGE('',*,*,#622,.T.);+#622=EDGE_CURVE('',#619,#623,#549,.T.);+#623=VERTEX_POINT('',#624);+#624=CARTESIAN_POINT('',(3.425,-0.215,0.65));+#625=ORIENTED_EDGE('',*,*,#626,.T.);+#626=EDGE_CURVE('',#623,#627,#549,.T.);+#627=VERTEX_POINT('',#628);+#628=CARTESIAN_POINT('',(3.425,-0.585,0.65));+#629=ORIENTED_EDGE('',*,*,#630,.T.);+#630=EDGE_CURVE('',#627,#631,#549,.T.);+#631=VERTEX_POINT('',#632);+#632=CARTESIAN_POINT('',(3.425,-1.015,0.65));+#633=ORIENTED_EDGE('',*,*,#634,.T.);+#634=EDGE_CURVE('',#631,#635,#549,.T.);+#635=VERTEX_POINT('',#636);+#636=CARTESIAN_POINT('',(3.425,-1.385,0.65));+#637=ORIENTED_EDGE('',*,*,#638,.T.);+#638=EDGE_CURVE('',#635,#639,#549,.T.);+#639=VERTEX_POINT('',#640);+#640=CARTESIAN_POINT('',(3.425,-1.815,0.65));+#641=ORIENTED_EDGE('',*,*,#642,.T.);+#642=EDGE_CURVE('',#639,#643,#549,.T.);+#643=VERTEX_POINT('',#644);+#644=CARTESIAN_POINT('',(3.425,-2.185,0.65));+#645=ORIENTED_EDGE('',*,*,#646,.T.);+#646=EDGE_CURVE('',#643,#647,#549,.T.);+#647=VERTEX_POINT('',#648);+#648=CARTESIAN_POINT('',(3.425,-2.615,0.65));+#649=ORIENTED_EDGE('',*,*,#650,.T.);+#650=EDGE_CURVE('',#647,#651,#549,.T.);+#651=VERTEX_POINT('',#652);+#652=CARTESIAN_POINT('',(3.425,-2.985,0.65));+#653=ORIENTED_EDGE('',*,*,#654,.T.);+#654=EDGE_CURVE('',#651,#577,#549,.T.);+#655=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#120,#124),(#578,#582)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#656=ADVANCED_FACE('',(#657),#687,.T.);+#657=FACE_BOUND('',#658,.T.);+#658=EDGE_LOOP('',(#659,#660,#670,#125));+#659=ORIENTED_EDGE('',*,*,#173,.T.);+#660=ORIENTED_EDGE('',*,*,#661,.T.);+#661=EDGE_CURVE('',#164,#662,#664,.T.);+#662=VERTEX_POINT('',#663);+#663=CARTESIAN_POINT('',(3.288860345589,3.223620276513,1.1));+#664=B_SPLINE_CURVE_WITH_KNOTS('',2,(#665,#666,#667,#668,#669),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#665=CARTESIAN_POINT('',(3.096268997613,3.416211624488,1.1));+#666=CARTESIAN_POINT('',(3.139700036233,3.372780585868,1.1));+#667=CARTESIAN_POINT('',(3.256240311051,3.256240311051,1.1));+#668=CARTESIAN_POINT('',(3.372780585868,3.139700036233,1.1));+#669=CARTESIAN_POINT('',(3.416211624488,3.096268997613,1.1));+#670=ORIENTED_EDGE('',*,*,#671,.F.);+#671=EDGE_CURVE('',#121,#662,#672,.T.);+#672=B_SPLINE_CURVE_WITH_KNOTS('',7,(#673,#674,#675,#676,#677,#678,#679,#680,#681,#682,#683,#684,#685,#686),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290672570848,1.),.UNSPECIFIED.);+#673=CARTESIAN_POINT('',(3.337636125417,3.243823866033,1.060996513181));+#674=CARTESIAN_POINT('',(3.337064530514,3.243587103672,1.063531861129));+#675=CARTESIAN_POINT('',(3.336327190489,3.243281687433,1.066085877419));+#676=CARTESIAN_POINT('',(3.335415635143,3.242904108846,1.068641354877));+#677=CARTESIAN_POINT('',(3.334324323088,3.242452072592,1.071178063152));+#678=CARTESIAN_POINT('',(3.33305135363,3.241924791378,1.073673931311));+#679=CARTESIAN_POINT('',(3.331599178641,3.241323280803,1.076106230435));+#680=CARTESIAN_POINT('',(3.326012603342,3.239009245547,1.084178976274));+#681=CARTESIAN_POINT('',(3.32102716953,3.236944211247,1.089394237371));+#682=CARTESIAN_POINT('',(3.315125783445,3.234499777094,1.093781264423));+#683=CARTESIAN_POINT('',(3.308576161939,3.231786835039,1.097036548798));+#684=CARTESIAN_POINT('',(3.301819927552,3.228988311124,1.099068483835));+#685=CARTESIAN_POINT('',(3.295175155407,3.226235956384,1.100000203694));+#686=CARTESIAN_POINT('',(3.288860345589,3.223620276512,1.1));+#687=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#128,#129,#130,#131,#132),(#688,#689,#690,#691,#692),(#665,#666,#667,#668,#669)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.206784146731),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#688=CARTESIAN_POINT('',(3.124540846999,3.444483473874,1.1));+#689=CARTESIAN_POINT('',(3.167971885619,3.401052435254,1.1));+#690=CARTESIAN_POINT('',(3.284512160436,3.284512160436,1.1));+#691=CARTESIAN_POINT('',(3.401052435254,3.167971885619,1.1));+#692=CARTESIAN_POINT('',(3.444483473874,3.124540846999,1.1));+#693=ADVANCED_FACE('',(#694),#724,.T.);+#694=FACE_BOUND('',#695,.T.);+#695=EDGE_LOOP('',(#696,#715,#723,#556));+#696=ORIENTED_EDGE('',*,*,#697,.T.);+#697=EDGE_CURVE('',#558,#698,#700,.T.);+#698=VERTEX_POINT('',#699);+#699=CARTESIAN_POINT('',(-3.288860345589,3.223620276513,1.1));+#700=B_SPLINE_CURVE_WITH_KNOTS('',7,(#701,#702,#703,#704,#705,#706,#707,#708,#709,#710,#711,#712,#713,#714),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290672659968,1.),.UNSPECIFIED.);+#701=CARTESIAN_POINT('',(-3.337636125417,3.243823866033,1.060996513181));+#702=CARTESIAN_POINT('',(-3.337064530339,3.243587103599,1.063531861906));+#703=CARTESIAN_POINT('',(-3.336327190038,3.243281687247,1.066085878982));+#704=CARTESIAN_POINT('',(-3.335415634305,3.242904108499,1.068641357225));+#705=CARTESIAN_POINT('',(-3.33432432175,3.242452072038,1.071178066262));+#706=CARTESIAN_POINT('',(-3.333051351679,3.24192479057,1.073673935137));+#707=CARTESIAN_POINT('',(-3.331599175971,3.241323279697,1.076106234908));+#708=CARTESIAN_POINT('',(-3.326012599585,3.239009243991,1.084178980204));+#709=CARTESIAN_POINT('',(-3.321027165823,3.236944209491,1.089394240125));+#710=CARTESIAN_POINT('',(-3.315125780154,3.234499776534,1.09378126606));+#711=CARTESIAN_POINT('',(-3.308576159394,3.231786832632,1.097036549562));+#712=CARTESIAN_POINT('',(-3.301819925882,3.228988311736,1.099068484069));+#713=CARTESIAN_POINT('',(-3.295175154615,3.226235955311,1.100000203694));+#714=CARTESIAN_POINT('',(-3.288860345589,3.223620276749,1.1));+#715=ORIENTED_EDGE('',*,*,#716,.T.);+#716=EDGE_CURVE('',#698,#145,#717,.T.);+#717=B_SPLINE_CURVE_WITH_KNOTS('',2,(#718,#719,#720,#721,#722),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#718=CARTESIAN_POINT('',(-3.416211624488,3.096268997613,1.1));+#719=CARTESIAN_POINT('',(-3.372780585868,3.139700036233,1.1));+#720=CARTESIAN_POINT('',(-3.256240311051,3.256240311051,1.1));+#721=CARTESIAN_POINT('',(-3.139700036233,3.372780585868,1.1));+#722=CARTESIAN_POINT('',(-3.096268997613,3.416211624488,1.1));+#723=ORIENTED_EDGE('',*,*,#144,.F.);+#724=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#561,#562,#563,#564,#565),(#725,#726,#727,#728,#729),(#718,#719,#720,#721,#722)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.206784146731),(-0.162823960534,-3.998243284624E-02,0.166801713885,0.289643241573),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#725=CARTESIAN_POINT('',(-3.444483473874,3.124540846999,1.1));+#726=CARTESIAN_POINT('',(-3.401052435254,3.167971885619,1.1));+#727=CARTESIAN_POINT('',(-3.284512160436,3.284512160436,1.1));+#728=CARTESIAN_POINT('',(-3.167971885619,3.401052435254,1.1));+#729=CARTESIAN_POINT('',(-3.124540846999,3.444483473874,1.1));+#730=ADVANCED_FACE('',(#731,#781),#791,.F.);+#731=FACE_BOUND('',#732,.F.);+#732=EDGE_LOOP('',(#162,#660,#733,#743,#753,#763,#773,#715));+#733=ORIENTED_EDGE('',*,*,#734,.T.);+#734=EDGE_CURVE('',#662,#735,#737,.T.);+#735=VERTEX_POINT('',#736);+#736=CARTESIAN_POINT('',(3.288860345589,-3.223620276513,1.1));+#737=B_SPLINE_CURVE_WITH_KNOTS('',2,(#738,#739,#740,#741,#742),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#738=CARTESIAN_POINT('',(3.288860345589,3.597392929117,1.1));+#739=CARTESIAN_POINT('',(3.288860345589,3.438778452201,1.1));+#740=CARTESIAN_POINT('',(3.288860345589,-2.299398411055E-15,1.1));+#741=CARTESIAN_POINT('',(3.288860345589,-3.438778452201,1.1));+#742=CARTESIAN_POINT('',(3.288860345589,-3.597392929117,1.1));+#743=ORIENTED_EDGE('',*,*,#744,.T.);+#744=EDGE_CURVE('',#735,#745,#747,.T.);+#745=VERTEX_POINT('',#746);+#746=CARTESIAN_POINT('',(3.223620276513,-3.288860345589,1.1));+#747=B_SPLINE_CURVE_WITH_KNOTS('',2,(#748,#749,#750,#751,#752),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#748=CARTESIAN_POINT('',(3.416211624488,-3.096268997613,1.1));+#749=CARTESIAN_POINT('',(3.372780585868,-3.139700036233,1.1));+#750=CARTESIAN_POINT('',(3.256240311051,-3.256240311051,1.1));+#751=CARTESIAN_POINT('',(3.139700036233,-3.372780585868,1.1));+#752=CARTESIAN_POINT('',(3.096268997613,-3.416211624488,1.1));+#753=ORIENTED_EDGE('',*,*,#754,.T.);+#754=EDGE_CURVE('',#745,#755,#757,.T.);+#755=VERTEX_POINT('',#756);+#756=CARTESIAN_POINT('',(-3.223620276513,-3.288860345589,1.1));+#757=B_SPLINE_CURVE_WITH_KNOTS('',2,(#758,#759,#760,#761,#762),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#758=CARTESIAN_POINT('',(3.597392929117,-3.288860345589,1.1));+#759=CARTESIAN_POINT('',(3.438778452201,-3.288860345589,1.1));+#760=CARTESIAN_POINT('',(8.09226057895E-16,-3.288860345589,1.1));+#761=CARTESIAN_POINT('',(-3.438778452201,-3.288860345589,1.1));+#762=CARTESIAN_POINT('',(-3.597392929117,-3.288860345589,1.1));+#763=ORIENTED_EDGE('',*,*,#764,.T.);+#764=EDGE_CURVE('',#755,#765,#767,.T.);+#765=VERTEX_POINT('',#766);+#766=CARTESIAN_POINT('',(-3.288860345589,-3.223620276513,1.1));+#767=B_SPLINE_CURVE_WITH_KNOTS('',2,(#768,#769,#770,#771,#772),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#768=CARTESIAN_POINT('',(-3.096268997613,-3.416211624488,1.1));+#769=CARTESIAN_POINT('',(-3.139700036233,-3.372780585868,1.1));+#770=CARTESIAN_POINT('',(-3.256240311051,-3.256240311051,1.1));+#771=CARTESIAN_POINT('',(-3.372780585868,-3.139700036233,1.1));+#772=CARTESIAN_POINT('',(-3.416211624488,-3.096268997613,1.1));+#773=ORIENTED_EDGE('',*,*,#774,.T.);+#774=EDGE_CURVE('',#765,#698,#775,.T.);+#775=B_SPLINE_CURVE_WITH_KNOTS('',2,(#776,#777,#778,#779,#780),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#776=CARTESIAN_POINT('',(-3.288860345589,-3.597392929117,1.1));+#777=CARTESIAN_POINT('',(-3.288860345589,-3.438778452201,1.1));+#778=CARTESIAN_POINT('',(-3.288860345589,-8.09226057895E-16,1.1));+#779=CARTESIAN_POINT('',(-3.288860345589,3.438778452201,1.1));+#780=CARTESIAN_POINT('',(-3.288860345589,3.597392929117,1.1));+#781=FACE_BOUND('',#782,.F.);+#782=EDGE_LOOP('',(#783));+#783=ORIENTED_EDGE('',*,*,#784,.F.);+#784=EDGE_CURVE('',#785,#785,#787,.T.);+#785=VERTEX_POINT('',#786);+#786=CARTESIAN_POINT('',(-2.629349547248,2.379349547248,1.1));+#787=CIRCLE('',#788,0.25);+#788=AXIS2_PLACEMENT_3D('',#789,#790,#538);+#789=CARTESIAN_POINT('',(-2.629349547248,2.629349547248,1.1));+#790=DIRECTION('',(0.,-0.,-1.));+#791=PLANE('',#792);+#792=AXIS2_PLACEMENT_3D('',#43,#273,#793);+#793=DIRECTION('',(0.697388978835,-0.716692829739,0.));+#794=ADVANCED_FACE('',(#795),#811,.F.);+#795=FACE_BOUND('',#796,.F.);+#796=EDGE_LOOP('',(#797,#804,#807,#808));+#797=ORIENTED_EDGE('',*,*,#798,.T.);+#798=EDGE_CURVE('',#799,#801,#803,.T.);+#799=VERTEX_POINT('',#800);+#800=CARTESIAN_POINT('',(-3.5,3.325,0.55));+#801=VERTEX_POINT('',#802);+#802=CARTESIAN_POINT('',(-3.325,3.5,0.55));+#803=LINE('',#800,#205);+#804=ORIENTED_EDGE('',*,*,#805,.T.);+#805=EDGE_CURVE('',#801,#202,#806,.T.);+#806=B_SPLINE_CURVE_WITH_KNOTS('',1,(#802,#203),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#807=ORIENTED_EDGE('',*,*,#199,.F.);+#808=ORIENTED_EDGE('',*,*,#809,.F.);+#809=EDGE_CURVE('',#799,#200,#810,.T.);+#810=B_SPLINE_CURVE_WITH_KNOTS('',1,(#800,#201),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#811=PLANE('',#812);+#812=AXIS2_PLACEMENT_3D('',#201,#138,#206);+#813=ADVANCED_FACE('',(#814),#829,.F.);+#814=FACE_BOUND('',#815,.F.);+#815=EDGE_LOOP('',(#816,#823,#827,#828));+#816=ORIENTED_EDGE('',*,*,#817,.F.);+#817=EDGE_CURVE('',#818,#234,#820,.T.);+#818=VERTEX_POINT('',#819);+#819=CARTESIAN_POINT('',(-3.5,2.985,0.55));+#820=LINE('',#821,#822);+#821=CARTESIAN_POINT('',(-3.5,2.985,0.478548768437));+#822=VECTOR('',#13,1.);+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#818,#799,#825,.T.);+#825=LINE('',#826,#230);+#826=CARTESIAN_POINT('',(-3.5,-3.325,0.55));+#827=ORIENTED_EDGE('',*,*,#809,.T.);+#828=ORIENTED_EDGE('',*,*,#241,.F.);+#829=PLANE('',#830);+#830=AXIS2_PLACEMENT_3D('',#243,#50,#231);+#831=ADVANCED_FACE('',(#832),#856,.F.);+#832=FACE_BOUND('',#833,.F.);+#833=EDGE_LOOP('',(#834,#841,#847,#849,#850,#854));+#834=ORIENTED_EDGE('',*,*,#835,.F.);+#835=EDGE_CURVE('',#836,#838,#840,.T.);+#836=VERTEX_POINT('',#837);+#837=CARTESIAN_POINT('',(-3.7,2.615,0.65));+#838=VERTEX_POINT('',#839);+#839=CARTESIAN_POINT('',(-3.5,2.615,0.65));+#840=LINE('',#837,#238);+#841=ORIENTED_EDGE('',*,*,#842,.T.);+#842=EDGE_CURVE('',#836,#843,#844,.T.);+#843=VERTEX_POINT('',#237);+#844=LINE('',#837,#845);+#845=VECTOR('',#846,1.);+#846=DIRECTION('',(1.144237745222E-17,1.,0.));+#847=ORIENTED_EDGE('',*,*,#848,.T.);+#848=EDGE_CURVE('',#843,#234,#236,.T.);+#849=ORIENTED_EDGE('',*,*,#233,.T.);+#850=ORIENTED_EDGE('',*,*,#851,.F.);+#851=EDGE_CURVE('',#852,#226,#228,.T.);+#852=VERTEX_POINT('',#853);+#853=CARTESIAN_POINT('',(-3.425,2.615,0.65));+#854=ORIENTED_EDGE('',*,*,#855,.F.);+#855=EDGE_CURVE('',#838,#852,#840,.T.);+#856=PLANE('',#857);+#857=AXIS2_PLACEMENT_3D('',#837,#273,#239);+#858=ADVANCED_FACE('',(#859),#937,.F.);+#859=FACE_BOUND('',#860,.F.);+#860=EDGE_LOOP('',(#861,#862,#872,#877,#881,#885,#889,#893,#897,#901,#905,#909,#913,#917,#921,#925,#929,#933,#935,#936));+#861=ORIENTED_EDGE('',*,*,#567,.T.);+#862=ORIENTED_EDGE('',*,*,#863,.F.);+#863=EDGE_CURVE('',#864,#558,#866,.T.);+#864=VERTEX_POINT('',#865);+#865=CARTESIAN_POINT('',(-3.3376399943,-3.24381999715,1.060996513181));+#866=B_SPLINE_CURVE_WITH_KNOTS('',2,(#867,#868,#869,#870,#871),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#867=CARTESIAN_POINT('',(-3.337767725625,-3.597392929117,1.060395584541));+#868=CARTESIAN_POINT('',(-3.337767725625,-3.438778452201,1.060395584541));+#869=CARTESIAN_POINT('',(-3.337767725625,-3.70566657984E-16,1.060395584541));+#870=CARTESIAN_POINT('',(-3.337767725625,3.438778452201,1.060395584541));+#871=CARTESIAN_POINT('',(-3.337767725625,3.597392929117,1.060395584541));+#872=ORIENTED_EDGE('',*,*,#873,.F.);+#873=EDGE_CURVE('',#874,#864,#875,.T.);+#874=VERTEX_POINT('',#229);+#875=B_SPLINE_CURVE_WITH_KNOTS('',1,(#229,#876),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#876=CARTESIAN_POINT('',(-3.329349547248,-3.239674773624,1.1));+#877=ORIENTED_EDGE('',*,*,#878,.T.);+#878=EDGE_CURVE('',#874,#879,#228,.T.);+#879=VERTEX_POINT('',#880);+#880=CARTESIAN_POINT('',(-3.425,-2.985,0.65));+#881=ORIENTED_EDGE('',*,*,#882,.T.);+#882=EDGE_CURVE('',#879,#883,#228,.T.);+#883=VERTEX_POINT('',#884);+#884=CARTESIAN_POINT('',(-3.425,-2.615,0.65));+#885=ORIENTED_EDGE('',*,*,#886,.T.);+#886=EDGE_CURVE('',#883,#887,#228,.T.);+#887=VERTEX_POINT('',#888);+#888=CARTESIAN_POINT('',(-3.425,-2.185,0.65));+#889=ORIENTED_EDGE('',*,*,#890,.T.);+#890=EDGE_CURVE('',#887,#891,#228,.T.);+#891=VERTEX_POINT('',#892);+#892=CARTESIAN_POINT('',(-3.425,-1.815,0.65));+#893=ORIENTED_EDGE('',*,*,#894,.T.);+#894=EDGE_CURVE('',#891,#895,#228,.T.);+#895=VERTEX_POINT('',#896);+#896=CARTESIAN_POINT('',(-3.425,-1.385,0.65));+#897=ORIENTED_EDGE('',*,*,#898,.T.);+#898=EDGE_CURVE('',#895,#899,#228,.T.);+#899=VERTEX_POINT('',#900);+#900=CARTESIAN_POINT('',(-3.425,-1.015,0.65));+#901=ORIENTED_EDGE('',*,*,#902,.T.);+#902=EDGE_CURVE('',#899,#903,#228,.T.);+#903=VERTEX_POINT('',#904);+#904=CARTESIAN_POINT('',(-3.425,-0.585,0.65));+#905=ORIENTED_EDGE('',*,*,#906,.T.);+#906=EDGE_CURVE('',#903,#907,#228,.T.);+#907=VERTEX_POINT('',#908);+#908=CARTESIAN_POINT('',(-3.425,-0.215,0.65));+#909=ORIENTED_EDGE('',*,*,#910,.T.);+#910=EDGE_CURVE('',#907,#911,#228,.T.);+#911=VERTEX_POINT('',#912);+#912=CARTESIAN_POINT('',(-3.425,0.215,0.65));+#913=ORIENTED_EDGE('',*,*,#914,.T.);+#914=EDGE_CURVE('',#911,#915,#228,.T.);+#915=VERTEX_POINT('',#916);+#916=CARTESIAN_POINT('',(-3.425,0.585,0.65));+#917=ORIENTED_EDGE('',*,*,#918,.T.);+#918=EDGE_CURVE('',#915,#919,#228,.T.);+#919=VERTEX_POINT('',#920);+#920=CARTESIAN_POINT('',(-3.425,1.015,0.65));+#921=ORIENTED_EDGE('',*,*,#922,.T.);+#922=EDGE_CURVE('',#919,#923,#228,.T.);+#923=VERTEX_POINT('',#924);+#924=CARTESIAN_POINT('',(-3.425,1.385,0.65));+#925=ORIENTED_EDGE('',*,*,#926,.T.);+#926=EDGE_CURVE('',#923,#927,#228,.T.);+#927=VERTEX_POINT('',#928);+#928=CARTESIAN_POINT('',(-3.425,1.815,0.65));+#929=ORIENTED_EDGE('',*,*,#930,.T.);+#930=EDGE_CURVE('',#927,#931,#228,.T.);+#931=VERTEX_POINT('',#932);+#932=CARTESIAN_POINT('',(-3.425,2.185,0.65));+#933=ORIENTED_EDGE('',*,*,#934,.T.);+#934=EDGE_CURVE('',#931,#852,#228,.T.);+#935=ORIENTED_EDGE('',*,*,#851,.T.);+#936=ORIENTED_EDGE('',*,*,#225,.T.);+#937=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#229,#876),(#222,#569)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#938=ADVANCED_FACE('',(#939),#952,.F.);+#939=FACE_BOUND('',#940,.F.);+#940=EDGE_LOOP('',(#941,#942,#947,#951));+#941=ORIENTED_EDGE('',*,*,#805,.F.);+#942=ORIENTED_EDGE('',*,*,#943,.T.);+#943=EDGE_CURVE('',#801,#944,#946,.T.);+#944=VERTEX_POINT('',#945);+#945=CARTESIAN_POINT('',(-2.985,3.5,0.55));+#946=LINE('',#802,#49);+#947=ORIENTED_EDGE('',*,*,#948,.T.);+#948=EDGE_CURVE('',#944,#209,#949,.T.);+#949=LINE('',#950,#822);+#950=CARTESIAN_POINT('',(-2.985,3.5,0.478548768437));+#951=ORIENTED_EDGE('',*,*,#208,.F.);+#952=PLANE('',#953);+#953=AXIS2_PLACEMENT_3D('',#203,#538,#50);+#954=ADVANCED_FACE('',(#955),#1026,.F.);+#955=FACE_BOUND('',#956,.F.);+#956=EDGE_LOOP('',(#957,#958,#966,#975,#982,#990,#995,#1000,#1005,#1013,#1020,#1025));+#957=ORIENTED_EDGE('',*,*,#948,.F.);+#958=ORIENTED_EDGE('',*,*,#959,.T.);+#959=EDGE_CURVE('',#944,#960,#962,.T.);+#960=VERTEX_POINT('',#961);+#961=CARTESIAN_POINT('',(-2.985,3.7,0.55));+#962=LINE('',#963,#964);+#963=CARTESIAN_POINT('',(-2.985,3.35,0.55));+#964=VECTOR('',#965,1.);+#965=DIRECTION('',(0.,1.,0.));+#966=ORIENTED_EDGE('',*,*,#967,.T.);+#967=EDGE_CURVE('',#960,#968,#970,.T.);+#968=VERTEX_POINT('',#969);+#969=CARTESIAN_POINT('',(-2.985,3.798480775301,0.467364817767));+#970=CIRCLE('',#971,0.1);+#971=AXIS2_PLACEMENT_3D('',#972,#973,#974);+#972=CARTESIAN_POINT('',(-2.985,3.7,0.45));+#973=DIRECTION('',(-1.,0.,0.));+#974=DIRECTION('',(0.,4.440892098501E-15,1.));+#975=ORIENTED_EDGE('',*,*,#976,.T.);+#976=EDGE_CURVE('',#968,#977,#979,.T.);+#977=VERTEX_POINT('',#978);+#978=CARTESIAN_POINT('',(-2.985,3.847120194575,0.165270364467));+#979=LINE('',#969,#980);+#980=VECTOR('',#981,1.);+#981=DIRECTION('',(0.,0.158960115908,-0.987285005229));+#982=ORIENTED_EDGE('',*,*,#983,.T.);+#983=EDGE_CURVE('',#977,#984,#986,.T.);+#984=VERTEX_POINT('',#985);+#985=CARTESIAN_POINT('',(-2.985,4.044081745177,-2.22044604925E-16));+#986=CIRCLE('',#987,0.2);+#987=AXIS2_PLACEMENT_3D('',#988,#261,#989);+#988=CARTESIAN_POINT('',(-2.985,4.044081745177,0.2));+#989=DIRECTION('',(0.,-0.984807753012,-0.173648177667));+#990=ORIENTED_EDGE('',*,*,#991,.T.);+#991=EDGE_CURVE('',#984,#992,#994,.T.);+#992=VERTEX_POINT('',#993);+#993=CARTESIAN_POINT('',(-2.985,4.5,-2.22044604925E-16));+#994=LINE('',#985,#964);+#995=ORIENTED_EDGE('',*,*,#996,.T.);+#996=EDGE_CURVE('',#992,#997,#999,.T.);+#997=VERTEX_POINT('',#998);+#998=CARTESIAN_POINT('',(-2.985,4.5,1.E-01));+#999=LINE('',#993,#822);+#1000=ORIENTED_EDGE('',*,*,#1001,.T.);+#1001=EDGE_CURVE('',#997,#1002,#1004,.T.);+#1002=VERTEX_POINT('',#1003);+#1003=CARTESIAN_POINT('',(-2.985,4.044081745177,1.E-01));+#1004=LINE('',#998,#216);+#1005=ORIENTED_EDGE('',*,*,#1006,.T.);+#1006=EDGE_CURVE('',#1002,#1007,#1009,.T.);+#1007=VERTEX_POINT('',#1008);+#1008=CARTESIAN_POINT('',(-2.985,3.945600969876,0.182635182233));+#1009=CIRCLE('',#1010,1.E-01);+#1010=AXIS2_PLACEMENT_3D('',#988,#1011,#1012);+#1011=DIRECTION('',(-1.,0.,-0.));+#1012=DIRECTION('',(0.,8.881784197001E-15,-1.));+#1013=ORIENTED_EDGE('',*,*,#1014,.T.);+#1014=EDGE_CURVE('',#1007,#1015,#1017,.T.);+#1015=VERTEX_POINT('',#1016);+#1016=CARTESIAN_POINT('',(-2.985,3.896961550602,0.484729635533));+#1017=LINE('',#1008,#1018);+#1018=VECTOR('',#1019,1.);+#1019=DIRECTION('',(0.,-0.158960115908,0.987285005229));+#1020=ORIENTED_EDGE('',*,*,#1021,.T.);+#1021=EDGE_CURVE('',#1015,#254,#1022,.T.);+#1022=CIRCLE('',#1023,0.2);+#1023=AXIS2_PLACEMENT_3D('',#972,#14,#1024);+#1024=DIRECTION('',(0.,0.984807753012,0.173648177667));+#1025=ORIENTED_EDGE('',*,*,#253,.T.);+#1026=PLANE('',#1027);+#1027=AXIS2_PLACEMENT_3D('',#1028,#261,#13);+#1028=CARTESIAN_POINT('',(-2.985,3.912728288784,0.307097536874));+#1029=ADVANCED_FACE('',(#1030),#1093,.T.);+#1030=FACE_BOUND('',#1031,.T.);+#1031=EDGE_LOOP('',(#1032,#1038,#1044,#1051,#1056,#1063,#1068,#1073,#1078,#1084,#1089,#262));+#1032=ORIENTED_EDGE('',*,*,#1033,.F.);+#1033=EDGE_CURVE('',#1034,#264,#1036,.T.);+#1034=VERTEX_POINT('',#1035);+#1035=CARTESIAN_POINT('',(-2.615,3.5,0.55));+#1036=LINE('',#1037,#822);+#1037=CARTESIAN_POINT('',(-2.615,3.5,0.478548768437));+#1038=ORIENTED_EDGE('',*,*,#1039,.T.);+#1039=EDGE_CURVE('',#1034,#1040,#1042,.T.);+#1040=VERTEX_POINT('',#1041);+#1041=CARTESIAN_POINT('',(-2.615,3.7,0.55));+#1042=LINE('',#1043,#964);+#1043=CARTESIAN_POINT('',(-2.615,3.35,0.55));+#1044=ORIENTED_EDGE('',*,*,#1045,.T.);+#1045=EDGE_CURVE('',#1040,#1046,#1048,.T.);+#1046=VERTEX_POINT('',#1047);+#1047=CARTESIAN_POINT('',(-2.615,3.798480775301,0.467364817767));+#1048=CIRCLE('',#1049,0.1);+#1049=AXIS2_PLACEMENT_3D('',#1050,#973,#974);+#1050=CARTESIAN_POINT('',(-2.615,3.7,0.45));+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1046,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-2.615,3.847120194575,0.165270364467));+#1055=LINE('',#1047,#980);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1053,#1058,#1060,.T.);+#1058=VERTEX_POINT('',#1059);+#1059=CARTESIAN_POINT('',(-2.615,4.044081745177,-2.22044604925E-16));+#1060=CIRCLE('',#1061,0.2);+#1061=AXIS2_PLACEMENT_3D('',#1062,#261,#989);+#1062=CARTESIAN_POINT('',(-2.615,4.044081745177,0.2));+#1063=ORIENTED_EDGE('',*,*,#1064,.T.);+#1064=EDGE_CURVE('',#1058,#1065,#1067,.T.);+#1065=VERTEX_POINT('',#1066);+#1066=CARTESIAN_POINT('',(-2.615,4.5,-2.22044604925E-16));+#1067=LINE('',#1059,#964);+#1068=ORIENTED_EDGE('',*,*,#1069,.T.);+#1069=EDGE_CURVE('',#1065,#1070,#1072,.T.);+#1070=VERTEX_POINT('',#1071);+#1071=CARTESIAN_POINT('',(-2.615,4.5,1.E-01));+#1072=LINE('',#1066,#822);+#1073=ORIENTED_EDGE('',*,*,#1074,.T.);+#1074=EDGE_CURVE('',#1070,#1075,#1077,.T.);+#1075=VERTEX_POINT('',#1076);+#1076=CARTESIAN_POINT('',(-2.615,4.044081745177,1.E-01));+#1077=LINE('',#1071,#216);+#1078=ORIENTED_EDGE('',*,*,#1079,.T.);+#1079=EDGE_CURVE('',#1075,#1080,#1082,.T.);+#1080=VERTEX_POINT('',#1081);+#1081=CARTESIAN_POINT('',(-2.615,3.945600969876,0.182635182233));+#1082=CIRCLE('',#1083,1.E-01);+#1083=AXIS2_PLACEMENT_3D('',#1062,#1011,#1012);+#1084=ORIENTED_EDGE('',*,*,#1085,.T.);+#1085=EDGE_CURVE('',#1080,#1086,#1088,.T.);+#1086=VERTEX_POINT('',#1087);+#1087=CARTESIAN_POINT('',(-2.615,3.896961550602,0.484729635533));+#1088=LINE('',#1081,#1018);+#1089=ORIENTED_EDGE('',*,*,#1090,.T.);+#1090=EDGE_CURVE('',#1086,#257,#1091,.T.);+#1091=CIRCLE('',#1092,0.2);+#1092=AXIS2_PLACEMENT_3D('',#1050,#14,#1024);+#1093=PLANE('',#1094);+#1094=AXIS2_PLACEMENT_3D('',#1095,#261,#13);+#1095=CARTESIAN_POINT('',(-2.615,3.912728288784,0.307097536874));+#1096=ADVANCED_FACE('',(#1097),#1104,.T.);+#1097=FACE_BOUND('',#1098,.F.);+#1098=EDGE_LOOP('',(#1099,#1089,#1102,#1103));+#1099=ORIENTED_EDGE('',*,*,#1100,.T.);+#1100=EDGE_CURVE('',#1015,#1086,#1101,.T.);+#1101=LINE('',#1016,#260);+#1102=ORIENTED_EDGE('',*,*,#256,.F.);+#1103=ORIENTED_EDGE('',*,*,#1021,.F.);+#1104=CYLINDRICAL_SURFACE('',#1105,0.2);+#1105=AXIS2_PLACEMENT_3D('',#972,#973,#1024);+#1106=ADVANCED_FACE('',(#1107),#952,.F.);+#1107=FACE_BOUND('',#1108,.F.);+#1108=EDGE_LOOP('',(#1032,#1109,#1113,#1117));+#1109=ORIENTED_EDGE('',*,*,#1110,.T.);+#1110=EDGE_CURVE('',#1034,#1111,#946,.T.);+#1111=VERTEX_POINT('',#1112);+#1112=CARTESIAN_POINT('',(-2.185,3.5,0.55));+#1113=ORIENTED_EDGE('',*,*,#1114,.T.);+#1114=EDGE_CURVE('',#1111,#280,#1115,.T.);+#1115=LINE('',#1116,#822);+#1116=CARTESIAN_POINT('',(-2.185,3.5,0.478548768437));+#1117=ORIENTED_EDGE('',*,*,#279,.F.);+#1118=ADVANCED_FACE('',(#1119),#1178,.F.);+#1119=FACE_BOUND('',#1120,.F.);+#1120=EDGE_LOOP('',(#1121,#1122,#1128,#1135,#1140,#1147,#1152,#1157,#1162,#1168,#1173,#1177));+#1121=ORIENTED_EDGE('',*,*,#1114,.F.);+#1122=ORIENTED_EDGE('',*,*,#1123,.T.);+#1123=EDGE_CURVE('',#1111,#1124,#1126,.T.);+#1124=VERTEX_POINT('',#1125);+#1125=CARTESIAN_POINT('',(-2.185,3.7,0.55));+#1126=LINE('',#1127,#964);+#1127=CARTESIAN_POINT('',(-2.185,3.35,0.55));+#1128=ORIENTED_EDGE('',*,*,#1129,.T.);+#1129=EDGE_CURVE('',#1124,#1130,#1132,.T.);+#1130=VERTEX_POINT('',#1131);+#1131=CARTESIAN_POINT('',(-2.185,3.798480775301,0.467364817767));+#1132=CIRCLE('',#1133,0.1);+#1133=AXIS2_PLACEMENT_3D('',#1134,#973,#974);+#1134=CARTESIAN_POINT('',(-2.185,3.7,0.45));+#1135=ORIENTED_EDGE('',*,*,#1136,.T.);+#1136=EDGE_CURVE('',#1130,#1137,#1139,.T.);+#1137=VERTEX_POINT('',#1138);+#1138=CARTESIAN_POINT('',(-2.185,3.847120194575,0.165270364467));+#1139=LINE('',#1131,#980);+#1140=ORIENTED_EDGE('',*,*,#1141,.T.);+#1141=EDGE_CURVE('',#1137,#1142,#1144,.T.);+#1142=VERTEX_POINT('',#1143);+#1143=CARTESIAN_POINT('',(-2.185,4.044081745177,-2.22044604925E-16));+#1144=CIRCLE('',#1145,0.2);+#1145=AXIS2_PLACEMENT_3D('',#1146,#261,#989);+#1146=CARTESIAN_POINT('',(-2.185,4.044081745177,0.2));+#1147=ORIENTED_EDGE('',*,*,#1148,.T.);+#1148=EDGE_CURVE('',#1142,#1149,#1151,.T.);+#1149=VERTEX_POINT('',#1150);+#1150=CARTESIAN_POINT('',(-2.185,4.5,-2.22044604925E-16));+#1151=LINE('',#1143,#964);+#1152=ORIENTED_EDGE('',*,*,#1153,.T.);+#1153=EDGE_CURVE('',#1149,#1154,#1156,.T.);+#1154=VERTEX_POINT('',#1155);+#1155=CARTESIAN_POINT('',(-2.185,4.5,1.E-01));+#1156=LINE('',#1150,#822);+#1157=ORIENTED_EDGE('',*,*,#1158,.T.);+#1158=EDGE_CURVE('',#1154,#1159,#1161,.T.);+#1159=VERTEX_POINT('',#1160);+#1160=CARTESIAN_POINT('',(-2.185,4.044081745177,1.E-01));+#1161=LINE('',#1155,#216);+#1162=ORIENTED_EDGE('',*,*,#1163,.T.);+#1163=EDGE_CURVE('',#1159,#1164,#1166,.T.);+#1164=VERTEX_POINT('',#1165);+#1165=CARTESIAN_POINT('',(-2.185,3.945600969876,0.182635182233));+#1166=CIRCLE('',#1167,1.E-01);+#1167=AXIS2_PLACEMENT_3D('',#1146,#1011,#1012);+#1168=ORIENTED_EDGE('',*,*,#1169,.T.);+#1169=EDGE_CURVE('',#1164,#1170,#1172,.T.);+#1170=VERTEX_POINT('',#1171);+#1171=CARTESIAN_POINT('',(-2.185,3.896961550602,0.484729635533));+#1172=LINE('',#1165,#1018);+#1173=ORIENTED_EDGE('',*,*,#1174,.T.);+#1174=EDGE_CURVE('',#1170,#292,#1175,.T.);+#1175=CIRCLE('',#1176,0.2);+#1176=AXIS2_PLACEMENT_3D('',#1134,#14,#1024);+#1177=ORIENTED_EDGE('',*,*,#291,.T.);+#1178=PLANE('',#1179);+#1179=AXIS2_PLACEMENT_3D('',#1180,#261,#13);+#1180=CARTESIAN_POINT('',(-2.185,3.912728288784,0.307097536874));+#1181=ADVANCED_FACE('',(#1182),#1245,.T.);+#1182=FACE_BOUND('',#1183,.T.);+#1183=EDGE_LOOP('',(#1184,#1190,#1196,#1203,#1208,#1215,#1220,#1225,#1230,#1236,#1241,#298));+#1184=ORIENTED_EDGE('',*,*,#1185,.F.);+#1185=EDGE_CURVE('',#1186,#300,#1188,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(-1.815,3.5,0.55));+#1188=LINE('',#1189,#822);+#1189=CARTESIAN_POINT('',(-1.815,3.5,0.478548768437));+#1190=ORIENTED_EDGE('',*,*,#1191,.T.);+#1191=EDGE_CURVE('',#1186,#1192,#1194,.T.);+#1192=VERTEX_POINT('',#1193);+#1193=CARTESIAN_POINT('',(-1.815,3.7,0.55));+#1194=LINE('',#1195,#964);+#1195=CARTESIAN_POINT('',(-1.815,3.35,0.55));+#1196=ORIENTED_EDGE('',*,*,#1197,.T.);+#1197=EDGE_CURVE('',#1192,#1198,#1200,.T.);+#1198=VERTEX_POINT('',#1199);+#1199=CARTESIAN_POINT('',(-1.815,3.798480775301,0.467364817767));+#1200=CIRCLE('',#1201,0.1);+#1201=AXIS2_PLACEMENT_3D('',#1202,#973,#974);+#1202=CARTESIAN_POINT('',(-1.815,3.7,0.45));+#1203=ORIENTED_EDGE('',*,*,#1204,.T.);+#1204=EDGE_CURVE('',#1198,#1205,#1207,.T.);+#1205=VERTEX_POINT('',#1206);+#1206=CARTESIAN_POINT('',(-1.815,3.847120194575,0.165270364467));+#1207=LINE('',#1199,#980);+#1208=ORIENTED_EDGE('',*,*,#1209,.T.);+#1209=EDGE_CURVE('',#1205,#1210,#1212,.T.);+#1210=VERTEX_POINT('',#1211);+#1211=CARTESIAN_POINT('',(-1.815,4.044081745177,-2.22044604925E-16));+#1212=CIRCLE('',#1213,0.2);+#1213=AXIS2_PLACEMENT_3D('',#1214,#261,#989);+#1214=CARTESIAN_POINT('',(-1.815,4.044081745177,0.2));+#1215=ORIENTED_EDGE('',*,*,#1216,.T.);+#1216=EDGE_CURVE('',#1210,#1217,#1219,.T.);+#1217=VERTEX_POINT('',#1218);+#1218=CARTESIAN_POINT('',(-1.815,4.5,-2.22044604925E-16));+#1219=LINE('',#1211,#964);+#1220=ORIENTED_EDGE('',*,*,#1221,.T.);+#1221=EDGE_CURVE('',#1217,#1222,#1224,.T.);+#1222=VERTEX_POINT('',#1223);+#1223=CARTESIAN_POINT('',(-1.815,4.5,1.E-01));+#1224=LINE('',#1218,#822);+#1225=ORIENTED_EDGE('',*,*,#1226,.T.);+#1226=EDGE_CURVE('',#1222,#1227,#1229,.T.);+#1227=VERTEX_POINT('',#1228);+#1228=CARTESIAN_POINT('',(-1.815,4.044081745177,1.E-01));+#1229=LINE('',#1223,#216);+#1230=ORIENTED_EDGE('',*,*,#1231,.T.);+#1231=EDGE_CURVE('',#1227,#1232,#1234,.T.);+#1232=VERTEX_POINT('',#1233);+#1233=CARTESIAN_POINT('',(-1.815,3.945600969876,0.182635182233));+#1234=CIRCLE('',#1235,1.E-01);+#1235=AXIS2_PLACEMENT_3D('',#1214,#1011,#1012);+#1236=ORIENTED_EDGE('',*,*,#1237,.T.);+#1237=EDGE_CURVE('',#1232,#1238,#1240,.T.);+#1238=VERTEX_POINT('',#1239);+#1239=CARTESIAN_POINT('',(-1.815,3.896961550602,0.484729635533));+#1240=LINE('',#1233,#1018);+#1241=ORIENTED_EDGE('',*,*,#1242,.T.);+#1242=EDGE_CURVE('',#1238,#295,#1243,.T.);+#1243=CIRCLE('',#1244,0.2);+#1244=AXIS2_PLACEMENT_3D('',#1202,#14,#1024);+#1245=PLANE('',#1246);+#1246=AXIS2_PLACEMENT_3D('',#1247,#261,#13);+#1247=CARTESIAN_POINT('',(-1.815,3.912728288784,0.307097536874));+#1248=ADVANCED_FACE('',(#1249),#1256,.T.);+#1249=FACE_BOUND('',#1250,.F.);+#1250=EDGE_LOOP('',(#1251,#1241,#1254,#1255));+#1251=ORIENTED_EDGE('',*,*,#1252,.T.);+#1252=EDGE_CURVE('',#1170,#1238,#1253,.T.);+#1253=LINE('',#1171,#260);+#1254=ORIENTED_EDGE('',*,*,#294,.F.);+#1255=ORIENTED_EDGE('',*,*,#1174,.F.);+#1256=CYLINDRICAL_SURFACE('',#1257,0.2);+#1257=AXIS2_PLACEMENT_3D('',#1134,#973,#1024);+#1258=ADVANCED_FACE('',(#1259),#952,.F.);+#1259=FACE_BOUND('',#1260,.F.);+#1260=EDGE_LOOP('',(#1184,#1261,#1265,#1269));+#1261=ORIENTED_EDGE('',*,*,#1262,.T.);+#1262=EDGE_CURVE('',#1186,#1263,#946,.T.);+#1263=VERTEX_POINT('',#1264);+#1264=CARTESIAN_POINT('',(-1.385,3.5,0.55));+#1265=ORIENTED_EDGE('',*,*,#1266,.T.);+#1266=EDGE_CURVE('',#1263,#315,#1267,.T.);+#1267=LINE('',#1268,#822);+#1268=CARTESIAN_POINT('',(-1.385,3.5,0.478548768437));+#1269=ORIENTED_EDGE('',*,*,#314,.F.);+#1270=ADVANCED_FACE('',(#1271),#1330,.F.);+#1271=FACE_BOUND('',#1272,.F.);+#1272=EDGE_LOOP('',(#1273,#1274,#1280,#1287,#1292,#1299,#1304,#1309,#1314,#1320,#1325,#1329));+#1273=ORIENTED_EDGE('',*,*,#1266,.F.);+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1263,#1276,#1278,.T.);+#1276=VERTEX_POINT('',#1277);+#1277=CARTESIAN_POINT('',(-1.385,3.7,0.55));+#1278=LINE('',#1279,#964);+#1279=CARTESIAN_POINT('',(-1.385,3.35,0.55));+#1280=ORIENTED_EDGE('',*,*,#1281,.T.);+#1281=EDGE_CURVE('',#1276,#1282,#1284,.T.);+#1282=VERTEX_POINT('',#1283);+#1283=CARTESIAN_POINT('',(-1.385,3.798480775301,0.467364817767));+#1284=CIRCLE('',#1285,0.1);+#1285=AXIS2_PLACEMENT_3D('',#1286,#973,#974);+#1286=CARTESIAN_POINT('',(-1.385,3.7,0.45));+#1287=ORIENTED_EDGE('',*,*,#1288,.T.);+#1288=EDGE_CURVE('',#1282,#1289,#1291,.T.);+#1289=VERTEX_POINT('',#1290);+#1290=CARTESIAN_POINT('',(-1.385,3.847120194575,0.165270364467));+#1291=LINE('',#1283,#980);+#1292=ORIENTED_EDGE('',*,*,#1293,.T.);+#1293=EDGE_CURVE('',#1289,#1294,#1296,.T.);+#1294=VERTEX_POINT('',#1295);+#1295=CARTESIAN_POINT('',(-1.385,4.044081745177,-2.22044604925E-16));+#1296=CIRCLE('',#1297,0.2);+#1297=AXIS2_PLACEMENT_3D('',#1298,#261,#989);+#1298=CARTESIAN_POINT('',(-1.385,4.044081745177,0.2));+#1299=ORIENTED_EDGE('',*,*,#1300,.T.);+#1300=EDGE_CURVE('',#1294,#1301,#1303,.T.);+#1301=VERTEX_POINT('',#1302);+#1302=CARTESIAN_POINT('',(-1.385,4.5,-2.22044604925E-16));+#1303=LINE('',#1295,#964);+#1304=ORIENTED_EDGE('',*,*,#1305,.T.);+#1305=EDGE_CURVE('',#1301,#1306,#1308,.T.);+#1306=VERTEX_POINT('',#1307);+#1307=CARTESIAN_POINT('',(-1.385,4.5,1.E-01));+#1308=LINE('',#1302,#822);+#1309=ORIENTED_EDGE('',*,*,#1310,.T.);+#1310=EDGE_CURVE('',#1306,#1311,#1313,.T.);+#1311=VERTEX_POINT('',#1312);+#1312=CARTESIAN_POINT('',(-1.385,4.044081745177,1.E-01));+#1313=LINE('',#1307,#216);+#1314=ORIENTED_EDGE('',*,*,#1315,.T.);+#1315=EDGE_CURVE('',#1311,#1316,#1318,.T.);+#1316=VERTEX_POINT('',#1317);+#1317=CARTESIAN_POINT('',(-1.385,3.945600969876,0.182635182233));+#1318=CIRCLE('',#1319,1.E-01);+#1319=AXIS2_PLACEMENT_3D('',#1298,#1011,#1012);+#1320=ORIENTED_EDGE('',*,*,#1321,.T.);+#1321=EDGE_CURVE('',#1316,#1322,#1324,.T.);+#1322=VERTEX_POINT('',#1323);+#1323=CARTESIAN_POINT('',(-1.385,3.896961550602,0.484729635533));+#1324=LINE('',#1317,#1018);+#1325=ORIENTED_EDGE('',*,*,#1326,.T.);+#1326=EDGE_CURVE('',#1322,#327,#1327,.T.);+#1327=CIRCLE('',#1328,0.2);+#1328=AXIS2_PLACEMENT_3D('',#1286,#14,#1024);+#1329=ORIENTED_EDGE('',*,*,#326,.T.);+#1330=PLANE('',#1331);+#1331=AXIS2_PLACEMENT_3D('',#1332,#261,#13);+#1332=CARTESIAN_POINT('',(-1.385,3.912728288784,0.307097536874));+#1333=ADVANCED_FACE('',(#1334),#1397,.T.);+#1334=FACE_BOUND('',#1335,.T.);+#1335=EDGE_LOOP('',(#1336,#1342,#1348,#1355,#1360,#1367,#1372,#1377,#1382,#1388,#1393,#333));+#1336=ORIENTED_EDGE('',*,*,#1337,.F.);+#1337=EDGE_CURVE('',#1338,#335,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(-1.015,3.5,0.55));+#1340=LINE('',#1341,#822);+#1341=CARTESIAN_POINT('',(-1.015,3.5,0.478548768437));+#1342=ORIENTED_EDGE('',*,*,#1343,.T.);+#1343=EDGE_CURVE('',#1338,#1344,#1346,.T.);+#1344=VERTEX_POINT('',#1345);+#1345=CARTESIAN_POINT('',(-1.015,3.7,0.55));+#1346=LINE('',#1347,#964);+#1347=CARTESIAN_POINT('',(-1.015,3.35,0.55));+#1348=ORIENTED_EDGE('',*,*,#1349,.T.);+#1349=EDGE_CURVE('',#1344,#1350,#1352,.T.);+#1350=VERTEX_POINT('',#1351);+#1351=CARTESIAN_POINT('',(-1.015,3.798480775301,0.467364817767));+#1352=CIRCLE('',#1353,0.1);+#1353=AXIS2_PLACEMENT_3D('',#1354,#973,#974);+#1354=CARTESIAN_POINT('',(-1.015,3.7,0.45));+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1350,#1357,#1359,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(-1.015,3.847120194575,0.165270364467));+#1359=LINE('',#1351,#980);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#1357,#1362,#1364,.T.);+#1362=VERTEX_POINT('',#1363);+#1363=CARTESIAN_POINT('',(-1.015,4.044081745177,-2.22044604925E-16));+#1364=CIRCLE('',#1365,0.2);+#1365=AXIS2_PLACEMENT_3D('',#1366,#261,#989);+#1366=CARTESIAN_POINT('',(-1.015,4.044081745177,0.2));+#1367=ORIENTED_EDGE('',*,*,#1368,.T.);+#1368=EDGE_CURVE('',#1362,#1369,#1371,.T.);+#1369=VERTEX_POINT('',#1370);+#1370=CARTESIAN_POINT('',(-1.015,4.5,-2.22044604925E-16));+#1371=LINE('',#1363,#964);+#1372=ORIENTED_EDGE('',*,*,#1373,.T.);+#1373=EDGE_CURVE('',#1369,#1374,#1376,.T.);+#1374=VERTEX_POINT('',#1375);+#1375=CARTESIAN_POINT('',(-1.015,4.5,1.E-01));+#1376=LINE('',#1370,#822);+#1377=ORIENTED_EDGE('',*,*,#1378,.T.);+#1378=EDGE_CURVE('',#1374,#1379,#1381,.T.);+#1379=VERTEX_POINT('',#1380);+#1380=CARTESIAN_POINT('',(-1.015,4.044081745177,1.E-01));+#1381=LINE('',#1375,#216);+#1382=ORIENTED_EDGE('',*,*,#1383,.T.);+#1383=EDGE_CURVE('',#1379,#1384,#1386,.T.);+#1384=VERTEX_POINT('',#1385);+#1385=CARTESIAN_POINT('',(-1.015,3.945600969876,0.182635182233));+#1386=CIRCLE('',#1387,1.E-01);+#1387=AXIS2_PLACEMENT_3D('',#1366,#1011,#1012);+#1388=ORIENTED_EDGE('',*,*,#1389,.T.);+#1389=EDGE_CURVE('',#1384,#1390,#1392,.T.);+#1390=VERTEX_POINT('',#1391);+#1391=CARTESIAN_POINT('',(-1.015,3.896961550602,0.484729635533));+#1392=LINE('',#1385,#1018);+#1393=ORIENTED_EDGE('',*,*,#1394,.T.);+#1394=EDGE_CURVE('',#1390,#330,#1395,.T.);+#1395=CIRCLE('',#1396,0.2);+#1396=AXIS2_PLACEMENT_3D('',#1354,#14,#1024);+#1397=PLANE('',#1398);+#1398=AXIS2_PLACEMENT_3D('',#1399,#261,#13);+#1399=CARTESIAN_POINT('',(-1.015,3.912728288784,0.307097536874));+#1400=ADVANCED_FACE('',(#1401),#1408,.T.);+#1401=FACE_BOUND('',#1402,.F.);+#1402=EDGE_LOOP('',(#1403,#1393,#1406,#1407));+#1403=ORIENTED_EDGE('',*,*,#1404,.T.);+#1404=EDGE_CURVE('',#1322,#1390,#1405,.T.);+#1405=LINE('',#1323,#260);+#1406=ORIENTED_EDGE('',*,*,#329,.F.);+#1407=ORIENTED_EDGE('',*,*,#1326,.F.);+#1408=CYLINDRICAL_SURFACE('',#1409,0.2);+#1409=AXIS2_PLACEMENT_3D('',#1286,#973,#1024);+#1410=ADVANCED_FACE('',(#1411),#952,.F.);+#1411=FACE_BOUND('',#1412,.F.);+#1412=EDGE_LOOP('',(#1336,#1413,#1417,#1421));+#1413=ORIENTED_EDGE('',*,*,#1414,.T.);+#1414=EDGE_CURVE('',#1338,#1415,#946,.T.);+#1415=VERTEX_POINT('',#1416);+#1416=CARTESIAN_POINT('',(-0.585,3.5,0.55));+#1417=ORIENTED_EDGE('',*,*,#1418,.T.);+#1418=EDGE_CURVE('',#1415,#350,#1419,.T.);+#1419=LINE('',#1420,#822);+#1420=CARTESIAN_POINT('',(-0.585,3.5,0.478548768437));+#1421=ORIENTED_EDGE('',*,*,#349,.F.);+#1422=ADVANCED_FACE('',(#1423),#1482,.F.);+#1423=FACE_BOUND('',#1424,.F.);+#1424=EDGE_LOOP('',(#1425,#1426,#1432,#1439,#1444,#1451,#1456,#1461,#1466,#1472,#1477,#1481));+#1425=ORIENTED_EDGE('',*,*,#1418,.F.);+#1426=ORIENTED_EDGE('',*,*,#1427,.T.);+#1427=EDGE_CURVE('',#1415,#1428,#1430,.T.);+#1428=VERTEX_POINT('',#1429);+#1429=CARTESIAN_POINT('',(-0.585,3.7,0.55));+#1430=LINE('',#1431,#964);+#1431=CARTESIAN_POINT('',(-0.585,3.35,0.55));+#1432=ORIENTED_EDGE('',*,*,#1433,.T.);+#1433=EDGE_CURVE('',#1428,#1434,#1436,.T.);+#1434=VERTEX_POINT('',#1435);+#1435=CARTESIAN_POINT('',(-0.585,3.798480775301,0.467364817767));+#1436=CIRCLE('',#1437,0.1);+#1437=AXIS2_PLACEMENT_3D('',#1438,#973,#974);+#1438=CARTESIAN_POINT('',(-0.585,3.7,0.45));+#1439=ORIENTED_EDGE('',*,*,#1440,.T.);+#1440=EDGE_CURVE('',#1434,#1441,#1443,.T.);+#1441=VERTEX_POINT('',#1442);+#1442=CARTESIAN_POINT('',(-0.585,3.847120194575,0.165270364467));+#1443=LINE('',#1435,#980);+#1444=ORIENTED_EDGE('',*,*,#1445,.T.);+#1445=EDGE_CURVE('',#1441,#1446,#1448,.T.);+#1446=VERTEX_POINT('',#1447);+#1447=CARTESIAN_POINT('',(-0.585,4.044081745177,-2.22044604925E-16));+#1448=CIRCLE('',#1449,0.2);+#1449=AXIS2_PLACEMENT_3D('',#1450,#261,#989);+#1450=CARTESIAN_POINT('',(-0.585,4.044081745177,0.2));+#1451=ORIENTED_EDGE('',*,*,#1452,.T.);+#1452=EDGE_CURVE('',#1446,#1453,#1455,.T.);+#1453=VERTEX_POINT('',#1454);+#1454=CARTESIAN_POINT('',(-0.585,4.5,-2.22044604925E-16));+#1455=LINE('',#1447,#964);+#1456=ORIENTED_EDGE('',*,*,#1457,.T.);+#1457=EDGE_CURVE('',#1453,#1458,#1460,.T.);+#1458=VERTEX_POINT('',#1459);+#1459=CARTESIAN_POINT('',(-0.585,4.5,1.E-01));+#1460=LINE('',#1454,#822);+#1461=ORIENTED_EDGE('',*,*,#1462,.T.);+#1462=EDGE_CURVE('',#1458,#1463,#1465,.T.);+#1463=VERTEX_POINT('',#1464);+#1464=CARTESIAN_POINT('',(-0.585,4.044081745177,1.E-01));+#1465=LINE('',#1459,#216);+#1466=ORIENTED_EDGE('',*,*,#1467,.T.);+#1467=EDGE_CURVE('',#1463,#1468,#1470,.T.);+#1468=VERTEX_POINT('',#1469);+#1469=CARTESIAN_POINT('',(-0.585,3.945600969876,0.182635182233));+#1470=CIRCLE('',#1471,1.E-01);+#1471=AXIS2_PLACEMENT_3D('',#1450,#1011,#1012);+#1472=ORIENTED_EDGE('',*,*,#1473,.T.);+#1473=EDGE_CURVE('',#1468,#1474,#1476,.T.);+#1474=VERTEX_POINT('',#1475);+#1475=CARTESIAN_POINT('',(-0.585,3.896961550602,0.484729635533));+#1476=LINE('',#1469,#1018);+#1477=ORIENTED_EDGE('',*,*,#1478,.T.);+#1478=EDGE_CURVE('',#1474,#362,#1479,.T.);+#1479=CIRCLE('',#1480,0.2);+#1480=AXIS2_PLACEMENT_3D('',#1438,#14,#1024);+#1481=ORIENTED_EDGE('',*,*,#361,.T.);+#1482=PLANE('',#1483);+#1483=AXIS2_PLACEMENT_3D('',#1484,#261,#13);+#1484=CARTESIAN_POINT('',(-0.585,3.912728288784,0.307097536874));+#1485=ADVANCED_FACE('',(#1486),#1549,.T.);+#1486=FACE_BOUND('',#1487,.T.);+#1487=EDGE_LOOP('',(#1488,#1494,#1500,#1507,#1512,#1519,#1524,#1529,#1534,#1540,#1545,#368));+#1488=ORIENTED_EDGE('',*,*,#1489,.F.);+#1489=EDGE_CURVE('',#1490,#370,#1492,.T.);+#1490=VERTEX_POINT('',#1491);+#1491=CARTESIAN_POINT('',(-0.215,3.5,0.55));+#1492=LINE('',#1493,#822);+#1493=CARTESIAN_POINT('',(-0.215,3.5,0.478548768437));+#1494=ORIENTED_EDGE('',*,*,#1495,.T.);+#1495=EDGE_CURVE('',#1490,#1496,#1498,.T.);+#1496=VERTEX_POINT('',#1497);+#1497=CARTESIAN_POINT('',(-0.215,3.7,0.55));+#1498=LINE('',#1499,#964);+#1499=CARTESIAN_POINT('',(-0.215,3.35,0.55));+#1500=ORIENTED_EDGE('',*,*,#1501,.T.);+#1501=EDGE_CURVE('',#1496,#1502,#1504,.T.);+#1502=VERTEX_POINT('',#1503);+#1503=CARTESIAN_POINT('',(-0.215,3.798480775301,0.467364817767));+#1504=CIRCLE('',#1505,0.1);+#1505=AXIS2_PLACEMENT_3D('',#1506,#973,#974);+#1506=CARTESIAN_POINT('',(-0.215,3.7,0.45));+#1507=ORIENTED_EDGE('',*,*,#1508,.T.);+#1508=EDGE_CURVE('',#1502,#1509,#1511,.T.);+#1509=VERTEX_POINT('',#1510);+#1510=CARTESIAN_POINT('',(-0.215,3.847120194575,0.165270364467));+#1511=LINE('',#1503,#980);+#1512=ORIENTED_EDGE('',*,*,#1513,.T.);+#1513=EDGE_CURVE('',#1509,#1514,#1516,.T.);+#1514=VERTEX_POINT('',#1515);+#1515=CARTESIAN_POINT('',(-0.215,4.044081745177,-2.22044604925E-16));+#1516=CIRCLE('',#1517,0.2);+#1517=AXIS2_PLACEMENT_3D('',#1518,#261,#989);+#1518=CARTESIAN_POINT('',(-0.215,4.044081745177,0.2));+#1519=ORIENTED_EDGE('',*,*,#1520,.T.);+#1520=EDGE_CURVE('',#1514,#1521,#1523,.T.);+#1521=VERTEX_POINT('',#1522);+#1522=CARTESIAN_POINT('',(-0.215,4.5,-2.22044604925E-16));+#1523=LINE('',#1515,#964);+#1524=ORIENTED_EDGE('',*,*,#1525,.T.);+#1525=EDGE_CURVE('',#1521,#1526,#1528,.T.);+#1526=VERTEX_POINT('',#1527);+#1527=CARTESIAN_POINT('',(-0.215,4.5,1.E-01));+#1528=LINE('',#1522,#822);+#1529=ORIENTED_EDGE('',*,*,#1530,.T.);+#1530=EDGE_CURVE('',#1526,#1531,#1533,.T.);+#1531=VERTEX_POINT('',#1532);+#1532=CARTESIAN_POINT('',(-0.215,4.044081745177,1.E-01));+#1533=LINE('',#1527,#216);+#1534=ORIENTED_EDGE('',*,*,#1535,.T.);+#1535=EDGE_CURVE('',#1531,#1536,#1538,.T.);+#1536=VERTEX_POINT('',#1537);+#1537=CARTESIAN_POINT('',(-0.215,3.945600969876,0.182635182233));+#1538=CIRCLE('',#1539,1.E-01);+#1539=AXIS2_PLACEMENT_3D('',#1518,#1011,#1012);+#1540=ORIENTED_EDGE('',*,*,#1541,.T.);+#1541=EDGE_CURVE('',#1536,#1542,#1544,.T.);+#1542=VERTEX_POINT('',#1543);+#1543=CARTESIAN_POINT('',(-0.215,3.896961550602,0.484729635533));+#1544=LINE('',#1537,#1018);+#1545=ORIENTED_EDGE('',*,*,#1546,.T.);+#1546=EDGE_CURVE('',#1542,#365,#1547,.T.);+#1547=CIRCLE('',#1548,0.2);+#1548=AXIS2_PLACEMENT_3D('',#1506,#14,#1024);+#1549=PLANE('',#1550);+#1550=AXIS2_PLACEMENT_3D('',#1551,#261,#13);+#1551=CARTESIAN_POINT('',(-0.215,3.912728288784,0.307097536874));+#1552=ADVANCED_FACE('',(#1553),#1560,.T.);+#1553=FACE_BOUND('',#1554,.F.);+#1554=EDGE_LOOP('',(#1555,#1545,#1558,#1559));+#1555=ORIENTED_EDGE('',*,*,#1556,.T.);+#1556=EDGE_CURVE('',#1474,#1542,#1557,.T.);+#1557=LINE('',#1475,#260);+#1558=ORIENTED_EDGE('',*,*,#364,.F.);+#1559=ORIENTED_EDGE('',*,*,#1478,.F.);+#1560=CYLINDRICAL_SURFACE('',#1561,0.2);+#1561=AXIS2_PLACEMENT_3D('',#1438,#973,#1024);+#1562=ADVANCED_FACE('',(#1563),#952,.F.);+#1563=FACE_BOUND('',#1564,.F.);+#1564=EDGE_LOOP('',(#1488,#1565,#1569,#1573));+#1565=ORIENTED_EDGE('',*,*,#1566,.T.);+#1566=EDGE_CURVE('',#1490,#1567,#946,.T.);+#1567=VERTEX_POINT('',#1568);+#1568=CARTESIAN_POINT('',(0.215,3.5,0.55));+#1569=ORIENTED_EDGE('',*,*,#1570,.T.);+#1570=EDGE_CURVE('',#1567,#385,#1571,.T.);+#1571=LINE('',#1572,#822);+#1572=CARTESIAN_POINT('',(0.215,3.5,0.478548768437));+#1573=ORIENTED_EDGE('',*,*,#384,.F.);+#1574=ADVANCED_FACE('',(#1575),#1634,.F.);+#1575=FACE_BOUND('',#1576,.F.);+#1576=EDGE_LOOP('',(#1577,#1578,#1584,#1591,#1596,#1603,#1608,#1613,#1618,#1624,#1629,#1633));+#1577=ORIENTED_EDGE('',*,*,#1570,.F.);+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#1567,#1580,#1582,.T.);+#1580=VERTEX_POINT('',#1581);+#1581=CARTESIAN_POINT('',(0.215,3.7,0.55));+#1582=LINE('',#1583,#964);+#1583=CARTESIAN_POINT('',(0.215,3.35,0.55));+#1584=ORIENTED_EDGE('',*,*,#1585,.T.);+#1585=EDGE_CURVE('',#1580,#1586,#1588,.T.);+#1586=VERTEX_POINT('',#1587);+#1587=CARTESIAN_POINT('',(0.215,3.798480775301,0.467364817767));+#1588=CIRCLE('',#1589,0.1);+#1589=AXIS2_PLACEMENT_3D('',#1590,#973,#974);+#1590=CARTESIAN_POINT('',(0.215,3.7,0.45));+#1591=ORIENTED_EDGE('',*,*,#1592,.T.);+#1592=EDGE_CURVE('',#1586,#1593,#1595,.T.);+#1593=VERTEX_POINT('',#1594);+#1594=CARTESIAN_POINT('',(0.215,3.847120194575,0.165270364467));+#1595=LINE('',#1587,#980);+#1596=ORIENTED_EDGE('',*,*,#1597,.T.);+#1597=EDGE_CURVE('',#1593,#1598,#1600,.T.);+#1598=VERTEX_POINT('',#1599);+#1599=CARTESIAN_POINT('',(0.215,4.044081745177,-2.22044604925E-16));+#1600=CIRCLE('',#1601,0.2);+#1601=AXIS2_PLACEMENT_3D('',#1602,#261,#989);+#1602=CARTESIAN_POINT('',(0.215,4.044081745177,0.2));+#1603=ORIENTED_EDGE('',*,*,#1604,.T.);+#1604=EDGE_CURVE('',#1598,#1605,#1607,.T.);+#1605=VERTEX_POINT('',#1606);+#1606=CARTESIAN_POINT('',(0.215,4.5,-2.22044604925E-16));+#1607=LINE('',#1599,#964);+#1608=ORIENTED_EDGE('',*,*,#1609,.T.);+#1609=EDGE_CURVE('',#1605,#1610,#1612,.T.);+#1610=VERTEX_POINT('',#1611);+#1611=CARTESIAN_POINT('',(0.215,4.5,1.E-01));+#1612=LINE('',#1606,#822);+#1613=ORIENTED_EDGE('',*,*,#1614,.T.);+#1614=EDGE_CURVE('',#1610,#1615,#1617,.T.);+#1615=VERTEX_POINT('',#1616);+#1616=CARTESIAN_POINT('',(0.215,4.044081745177,1.E-01));+#1617=LINE('',#1611,#216);+#1618=ORIENTED_EDGE('',*,*,#1619,.T.);+#1619=EDGE_CURVE('',#1615,#1620,#1622,.T.);+#1620=VERTEX_POINT('',#1621);+#1621=CARTESIAN_POINT('',(0.215,3.945600969876,0.182635182233));+#1622=CIRCLE('',#1623,1.E-01);+#1623=AXIS2_PLACEMENT_3D('',#1602,#1011,#1012);+#1624=ORIENTED_EDGE('',*,*,#1625,.T.);+#1625=EDGE_CURVE('',#1620,#1626,#1628,.T.);+#1626=VERTEX_POINT('',#1627);+#1627=CARTESIAN_POINT('',(0.215,3.896961550602,0.484729635533));+#1628=LINE('',#1621,#1018);+#1629=ORIENTED_EDGE('',*,*,#1630,.T.);+#1630=EDGE_CURVE('',#1626,#397,#1631,.T.);+#1631=CIRCLE('',#1632,0.2);+#1632=AXIS2_PLACEMENT_3D('',#1590,#14,#1024);+#1633=ORIENTED_EDGE('',*,*,#396,.T.);+#1634=PLANE('',#1635);+#1635=AXIS2_PLACEMENT_3D('',#1636,#261,#13);+#1636=CARTESIAN_POINT('',(0.215,3.912728288784,0.307097536874));+#1637=ADVANCED_FACE('',(#1638),#1701,.T.);+#1638=FACE_BOUND('',#1639,.T.);+#1639=EDGE_LOOP('',(#1640,#1646,#1652,#1659,#1664,#1671,#1676,#1681,#1686,#1692,#1697,#403));+#1640=ORIENTED_EDGE('',*,*,#1641,.F.);+#1641=EDGE_CURVE('',#1642,#405,#1644,.T.);+#1642=VERTEX_POINT('',#1643);+#1643=CARTESIAN_POINT('',(0.585,3.5,0.55));+#1644=LINE('',#1645,#822);+#1645=CARTESIAN_POINT('',(0.585,3.5,0.478548768437));+#1646=ORIENTED_EDGE('',*,*,#1647,.T.);+#1647=EDGE_CURVE('',#1642,#1648,#1650,.T.);+#1648=VERTEX_POINT('',#1649);+#1649=CARTESIAN_POINT('',(0.585,3.7,0.55));+#1650=LINE('',#1651,#964);+#1651=CARTESIAN_POINT('',(0.585,3.35,0.55));+#1652=ORIENTED_EDGE('',*,*,#1653,.T.);+#1653=EDGE_CURVE('',#1648,#1654,#1656,.T.);+#1654=VERTEX_POINT('',#1655);+#1655=CARTESIAN_POINT('',(0.585,3.798480775301,0.467364817767));+#1656=CIRCLE('',#1657,0.1);+#1657=AXIS2_PLACEMENT_3D('',#1658,#973,#974);+#1658=CARTESIAN_POINT('',(0.585,3.7,0.45));+#1659=ORIENTED_EDGE('',*,*,#1660,.T.);+#1660=EDGE_CURVE('',#1654,#1661,#1663,.T.);+#1661=VERTEX_POINT('',#1662);+#1662=CARTESIAN_POINT('',(0.585,3.847120194575,0.165270364467));+#1663=LINE('',#1655,#980);+#1664=ORIENTED_EDGE('',*,*,#1665,.T.);+#1665=EDGE_CURVE('',#1661,#1666,#1668,.T.);+#1666=VERTEX_POINT('',#1667);+#1667=CARTESIAN_POINT('',(0.585,4.044081745177,-2.22044604925E-16));+#1668=CIRCLE('',#1669,0.2);+#1669=AXIS2_PLACEMENT_3D('',#1670,#261,#989);+#1670=CARTESIAN_POINT('',(0.585,4.044081745177,0.2));+#1671=ORIENTED_EDGE('',*,*,#1672,.T.);+#1672=EDGE_CURVE('',#1666,#1673,#1675,.T.);+#1673=VERTEX_POINT('',#1674);+#1674=CARTESIAN_POINT('',(0.585,4.5,-2.22044604925E-16));+#1675=LINE('',#1667,#964);+#1676=ORIENTED_EDGE('',*,*,#1677,.T.);+#1677=EDGE_CURVE('',#1673,#1678,#1680,.T.);+#1678=VERTEX_POINT('',#1679);+#1679=CARTESIAN_POINT('',(0.585,4.5,1.E-01));+#1680=LINE('',#1674,#822);+#1681=ORIENTED_EDGE('',*,*,#1682,.T.);+#1682=EDGE_CURVE('',#1678,#1683,#1685,.T.);+#1683=VERTEX_POINT('',#1684);+#1684=CARTESIAN_POINT('',(0.585,4.044081745177,1.E-01));+#1685=LINE('',#1679,#216);+#1686=ORIENTED_EDGE('',*,*,#1687,.T.);+#1687=EDGE_CURVE('',#1683,#1688,#1690,.T.);+#1688=VERTEX_POINT('',#1689);+#1689=CARTESIAN_POINT('',(0.585,3.945600969876,0.182635182233));+#1690=CIRCLE('',#1691,1.E-01);+#1691=AXIS2_PLACEMENT_3D('',#1670,#1011,#1012);+#1692=ORIENTED_EDGE('',*,*,#1693,.T.);+#1693=EDGE_CURVE('',#1688,#1694,#1696,.T.);+#1694=VERTEX_POINT('',#1695);+#1695=CARTESIAN_POINT('',(0.585,3.896961550602,0.484729635533));+#1696=LINE('',#1689,#1018);+#1697=ORIENTED_EDGE('',*,*,#1698,.T.);+#1698=EDGE_CURVE('',#1694,#400,#1699,.T.);+#1699=CIRCLE('',#1700,0.2);+#1700=AXIS2_PLACEMENT_3D('',#1658,#14,#1024);+#1701=PLANE('',#1702);+#1702=AXIS2_PLACEMENT_3D('',#1703,#261,#13);+#1703=CARTESIAN_POINT('',(0.585,3.912728288784,0.307097536874));+#1704=ADVANCED_FACE('',(#1705),#1712,.T.);+#1705=FACE_BOUND('',#1706,.F.);+#1706=EDGE_LOOP('',(#1707,#1697,#1710,#1711));+#1707=ORIENTED_EDGE('',*,*,#1708,.T.);+#1708=EDGE_CURVE('',#1626,#1694,#1709,.T.);+#1709=LINE('',#1627,#260);+#1710=ORIENTED_EDGE('',*,*,#399,.F.);+#1711=ORIENTED_EDGE('',*,*,#1630,.F.);+#1712=CYLINDRICAL_SURFACE('',#1713,0.2);+#1713=AXIS2_PLACEMENT_3D('',#1590,#973,#1024);+#1714=ADVANCED_FACE('',(#1715),#952,.F.);+#1715=FACE_BOUND('',#1716,.F.);+#1716=EDGE_LOOP('',(#1640,#1717,#1721,#1725));+#1717=ORIENTED_EDGE('',*,*,#1718,.T.);+#1718=EDGE_CURVE('',#1642,#1719,#946,.T.);+#1719=VERTEX_POINT('',#1720);+#1720=CARTESIAN_POINT('',(1.015,3.5,0.55));+#1721=ORIENTED_EDGE('',*,*,#1722,.T.);+#1722=EDGE_CURVE('',#1719,#420,#1723,.T.);+#1723=LINE('',#1724,#822);+#1724=CARTESIAN_POINT('',(1.015,3.5,0.478548768437));+#1725=ORIENTED_EDGE('',*,*,#419,.F.);+#1726=ADVANCED_FACE('',(#1727),#1786,.F.);+#1727=FACE_BOUND('',#1728,.F.);+#1728=EDGE_LOOP('',(#1729,#1730,#1736,#1743,#1748,#1755,#1760,#1765,#1770,#1776,#1781,#1785));+#1729=ORIENTED_EDGE('',*,*,#1722,.F.);+#1730=ORIENTED_EDGE('',*,*,#1731,.T.);+#1731=EDGE_CURVE('',#1719,#1732,#1734,.T.);+#1732=VERTEX_POINT('',#1733);+#1733=CARTESIAN_POINT('',(1.015,3.7,0.55));+#1734=LINE('',#1735,#964);+#1735=CARTESIAN_POINT('',(1.015,3.35,0.55));+#1736=ORIENTED_EDGE('',*,*,#1737,.T.);+#1737=EDGE_CURVE('',#1732,#1738,#1740,.T.);+#1738=VERTEX_POINT('',#1739);+#1739=CARTESIAN_POINT('',(1.015,3.798480775301,0.467364817767));+#1740=CIRCLE('',#1741,0.1);+#1741=AXIS2_PLACEMENT_3D('',#1742,#973,#974);+#1742=CARTESIAN_POINT('',(1.015,3.7,0.45));+#1743=ORIENTED_EDGE('',*,*,#1744,.T.);+#1744=EDGE_CURVE('',#1738,#1745,#1747,.T.);+#1745=VERTEX_POINT('',#1746);+#1746=CARTESIAN_POINT('',(1.015,3.847120194575,0.165270364467));+#1747=LINE('',#1739,#980);+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#1745,#1750,#1752,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(1.015,4.044081745177,-2.22044604925E-16));+#1752=CIRCLE('',#1753,0.2);+#1753=AXIS2_PLACEMENT_3D('',#1754,#261,#989);+#1754=CARTESIAN_POINT('',(1.015,4.044081745177,0.2));+#1755=ORIENTED_EDGE('',*,*,#1756,.T.);+#1756=EDGE_CURVE('',#1750,#1757,#1759,.T.);+#1757=VERTEX_POINT('',#1758);+#1758=CARTESIAN_POINT('',(1.015,4.5,-2.22044604925E-16));+#1759=LINE('',#1751,#964);+#1760=ORIENTED_EDGE('',*,*,#1761,.T.);+#1761=EDGE_CURVE('',#1757,#1762,#1764,.T.);+#1762=VERTEX_POINT('',#1763);+#1763=CARTESIAN_POINT('',(1.015,4.5,1.E-01));+#1764=LINE('',#1758,#822);+#1765=ORIENTED_EDGE('',*,*,#1766,.T.);+#1766=EDGE_CURVE('',#1762,#1767,#1769,.T.);+#1767=VERTEX_POINT('',#1768);+#1768=CARTESIAN_POINT('',(1.015,4.044081745177,1.E-01));+#1769=LINE('',#1763,#216);+#1770=ORIENTED_EDGE('',*,*,#1771,.T.);+#1771=EDGE_CURVE('',#1767,#1772,#1774,.T.);+#1772=VERTEX_POINT('',#1773);+#1773=CARTESIAN_POINT('',(1.015,3.945600969876,0.182635182233));+#1774=CIRCLE('',#1775,1.E-01);+#1775=AXIS2_PLACEMENT_3D('',#1754,#1011,#1012);+#1776=ORIENTED_EDGE('',*,*,#1777,.T.);+#1777=EDGE_CURVE('',#1772,#1778,#1780,.T.);+#1778=VERTEX_POINT('',#1779);+#1779=CARTESIAN_POINT('',(1.015,3.896961550602,0.484729635533));+#1780=LINE('',#1773,#1018);+#1781=ORIENTED_EDGE('',*,*,#1782,.T.);+#1782=EDGE_CURVE('',#1778,#432,#1783,.T.);+#1783=CIRCLE('',#1784,0.2);+#1784=AXIS2_PLACEMENT_3D('',#1742,#14,#1024);+#1785=ORIENTED_EDGE('',*,*,#431,.T.);+#1786=PLANE('',#1787);+#1787=AXIS2_PLACEMENT_3D('',#1788,#261,#13);+#1788=CARTESIAN_POINT('',(1.015,3.912728288784,0.307097536874));+#1789=ADVANCED_FACE('',(#1790),#1853,.T.);+#1790=FACE_BOUND('',#1791,.T.);+#1791=EDGE_LOOP('',(#1792,#1798,#1804,#1811,#1816,#1823,#1828,#1833,#1838,#1844,#1849,#438));+#1792=ORIENTED_EDGE('',*,*,#1793,.F.);+#1793=EDGE_CURVE('',#1794,#440,#1796,.T.);+#1794=VERTEX_POINT('',#1795);+#1795=CARTESIAN_POINT('',(1.385,3.5,0.55));+#1796=LINE('',#1797,#822);+#1797=CARTESIAN_POINT('',(1.385,3.5,0.478548768437));+#1798=ORIENTED_EDGE('',*,*,#1799,.T.);+#1799=EDGE_CURVE('',#1794,#1800,#1802,.T.);+#1800=VERTEX_POINT('',#1801);+#1801=CARTESIAN_POINT('',(1.385,3.7,0.55));+#1802=LINE('',#1803,#964);+#1803=CARTESIAN_POINT('',(1.385,3.35,0.55));+#1804=ORIENTED_EDGE('',*,*,#1805,.T.);+#1805=EDGE_CURVE('',#1800,#1806,#1808,.T.);+#1806=VERTEX_POINT('',#1807);+#1807=CARTESIAN_POINT('',(1.385,3.798480775301,0.467364817767));+#1808=CIRCLE('',#1809,0.1);+#1809=AXIS2_PLACEMENT_3D('',#1810,#973,#974);+#1810=CARTESIAN_POINT('',(1.385,3.7,0.45));+#1811=ORIENTED_EDGE('',*,*,#1812,.T.);+#1812=EDGE_CURVE('',#1806,#1813,#1815,.T.);+#1813=VERTEX_POINT('',#1814);+#1814=CARTESIAN_POINT('',(1.385,3.847120194575,0.165270364467));+#1815=LINE('',#1807,#980);+#1816=ORIENTED_EDGE('',*,*,#1817,.T.);+#1817=EDGE_CURVE('',#1813,#1818,#1820,.T.);+#1818=VERTEX_POINT('',#1819);+#1819=CARTESIAN_POINT('',(1.385,4.044081745177,-2.22044604925E-16));+#1820=CIRCLE('',#1821,0.2);+#1821=AXIS2_PLACEMENT_3D('',#1822,#261,#989);+#1822=CARTESIAN_POINT('',(1.385,4.044081745177,0.2));+#1823=ORIENTED_EDGE('',*,*,#1824,.T.);+#1824=EDGE_CURVE('',#1818,#1825,#1827,.T.);+#1825=VERTEX_POINT('',#1826);+#1826=CARTESIAN_POINT('',(1.385,4.5,-2.22044604925E-16));+#1827=LINE('',#1819,#964);+#1828=ORIENTED_EDGE('',*,*,#1829,.T.);+#1829=EDGE_CURVE('',#1825,#1830,#1832,.T.);+#1830=VERTEX_POINT('',#1831);+#1831=CARTESIAN_POINT('',(1.385,4.5,1.E-01));+#1832=LINE('',#1826,#822);+#1833=ORIENTED_EDGE('',*,*,#1834,.T.);+#1834=EDGE_CURVE('',#1830,#1835,#1837,.T.);+#1835=VERTEX_POINT('',#1836);+#1836=CARTESIAN_POINT('',(1.385,4.044081745177,1.E-01));+#1837=LINE('',#1831,#216);+#1838=ORIENTED_EDGE('',*,*,#1839,.T.);+#1839=EDGE_CURVE('',#1835,#1840,#1842,.T.);+#1840=VERTEX_POINT('',#1841);+#1841=CARTESIAN_POINT('',(1.385,3.945600969876,0.182635182233));+#1842=CIRCLE('',#1843,1.E-01);+#1843=AXIS2_PLACEMENT_3D('',#1822,#1011,#1012);+#1844=ORIENTED_EDGE('',*,*,#1845,.T.);+#1845=EDGE_CURVE('',#1840,#1846,#1848,.T.);+#1846=VERTEX_POINT('',#1847);+#1847=CARTESIAN_POINT('',(1.385,3.896961550602,0.484729635533));+#1848=LINE('',#1841,#1018);+#1849=ORIENTED_EDGE('',*,*,#1850,.T.);+#1850=EDGE_CURVE('',#1846,#435,#1851,.T.);+#1851=CIRCLE('',#1852,0.2);+#1852=AXIS2_PLACEMENT_3D('',#1810,#14,#1024);+#1853=PLANE('',#1854);+#1854=AXIS2_PLACEMENT_3D('',#1855,#261,#13);+#1855=CARTESIAN_POINT('',(1.385,3.912728288784,0.307097536874));+#1856=ADVANCED_FACE('',(#1857),#1864,.T.);+#1857=FACE_BOUND('',#1858,.F.);+#1858=EDGE_LOOP('',(#1859,#1849,#1862,#1863));+#1859=ORIENTED_EDGE('',*,*,#1860,.T.);+#1860=EDGE_CURVE('',#1778,#1846,#1861,.T.);+#1861=LINE('',#1779,#260);+#1862=ORIENTED_EDGE('',*,*,#434,.F.);+#1863=ORIENTED_EDGE('',*,*,#1782,.F.);+#1864=CYLINDRICAL_SURFACE('',#1865,0.2);+#1865=AXIS2_PLACEMENT_3D('',#1742,#973,#1024);+#1866=ADVANCED_FACE('',(#1867),#952,.F.);+#1867=FACE_BOUND('',#1868,.F.);+#1868=EDGE_LOOP('',(#1792,#1869,#1873,#1877));+#1869=ORIENTED_EDGE('',*,*,#1870,.T.);+#1870=EDGE_CURVE('',#1794,#1871,#946,.T.);+#1871=VERTEX_POINT('',#1872);+#1872=CARTESIAN_POINT('',(1.815,3.5,0.55));+#1873=ORIENTED_EDGE('',*,*,#1874,.T.);+#1874=EDGE_CURVE('',#1871,#455,#1875,.T.);+#1875=LINE('',#1876,#822);+#1876=CARTESIAN_POINT('',(1.815,3.5,0.478548768437));+#1877=ORIENTED_EDGE('',*,*,#454,.F.);+#1878=ADVANCED_FACE('',(#1879),#1938,.F.);+#1879=FACE_BOUND('',#1880,.F.);+#1880=EDGE_LOOP('',(#1881,#1882,#1888,#1895,#1900,#1907,#1912,#1917,#1922,#1928,#1933,#1937));+#1881=ORIENTED_EDGE('',*,*,#1874,.F.);+#1882=ORIENTED_EDGE('',*,*,#1883,.T.);+#1883=EDGE_CURVE('',#1871,#1884,#1886,.T.);+#1884=VERTEX_POINT('',#1885);+#1885=CARTESIAN_POINT('',(1.815,3.7,0.55));+#1886=LINE('',#1887,#964);+#1887=CARTESIAN_POINT('',(1.815,3.35,0.55));+#1888=ORIENTED_EDGE('',*,*,#1889,.T.);+#1889=EDGE_CURVE('',#1884,#1890,#1892,.T.);+#1890=VERTEX_POINT('',#1891);+#1891=CARTESIAN_POINT('',(1.815,3.798480775301,0.467364817767));+#1892=CIRCLE('',#1893,0.1);+#1893=AXIS2_PLACEMENT_3D('',#1894,#973,#974);+#1894=CARTESIAN_POINT('',(1.815,3.7,0.45));+#1895=ORIENTED_EDGE('',*,*,#1896,.T.);+#1896=EDGE_CURVE('',#1890,#1897,#1899,.T.);+#1897=VERTEX_POINT('',#1898);+#1898=CARTESIAN_POINT('',(1.815,3.847120194575,0.165270364467));+#1899=LINE('',#1891,#980);+#1900=ORIENTED_EDGE('',*,*,#1901,.T.);+#1901=EDGE_CURVE('',#1897,#1902,#1904,.T.);+#1902=VERTEX_POINT('',#1903);+#1903=CARTESIAN_POINT('',(1.815,4.044081745177,-2.22044604925E-16));+#1904=CIRCLE('',#1905,0.2);+#1905=AXIS2_PLACEMENT_3D('',#1906,#261,#989);+#1906=CARTESIAN_POINT('',(1.815,4.044081745177,0.2));+#1907=ORIENTED_EDGE('',*,*,#1908,.T.);+#1908=EDGE_CURVE('',#1902,#1909,#1911,.T.);+#1909=VERTEX_POINT('',#1910);+#1910=CARTESIAN_POINT('',(1.815,4.5,-2.22044604925E-16));+#1911=LINE('',#1903,#964);+#1912=ORIENTED_EDGE('',*,*,#1913,.T.);+#1913=EDGE_CURVE('',#1909,#1914,#1916,.T.);+#1914=VERTEX_POINT('',#1915);+#1915=CARTESIAN_POINT('',(1.815,4.5,1.E-01));+#1916=LINE('',#1910,#822);+#1917=ORIENTED_EDGE('',*,*,#1918,.T.);+#1918=EDGE_CURVE('',#1914,#1919,#1921,.T.);+#1919=VERTEX_POINT('',#1920);+#1920=CARTESIAN_POINT('',(1.815,4.044081745177,1.E-01));+#1921=LINE('',#1915,#216);+#1922=ORIENTED_EDGE('',*,*,#1923,.T.);+#1923=EDGE_CURVE('',#1919,#1924,#1926,.T.);+#1924=VERTEX_POINT('',#1925);+#1925=CARTESIAN_POINT('',(1.815,3.945600969876,0.182635182233));+#1926=CIRCLE('',#1927,1.E-01);+#1927=AXIS2_PLACEMENT_3D('',#1906,#1011,#1012);+#1928=ORIENTED_EDGE('',*,*,#1929,.T.);+#1929=EDGE_CURVE('',#1924,#1930,#1932,.T.);+#1930=VERTEX_POINT('',#1931);+#1931=CARTESIAN_POINT('',(1.815,3.896961550602,0.484729635533));+#1932=LINE('',#1925,#1018);+#1933=ORIENTED_EDGE('',*,*,#1934,.T.);+#1934=EDGE_CURVE('',#1930,#467,#1935,.T.);+#1935=CIRCLE('',#1936,0.2);+#1936=AXIS2_PLACEMENT_3D('',#1894,#14,#1024);+#1937=ORIENTED_EDGE('',*,*,#466,.T.);+#1938=PLANE('',#1939);+#1939=AXIS2_PLACEMENT_3D('',#1940,#261,#13);+#1940=CARTESIAN_POINT('',(1.815,3.912728288784,0.307097536874));+#1941=ADVANCED_FACE('',(#1942),#2005,.T.);+#1942=FACE_BOUND('',#1943,.T.);+#1943=EDGE_LOOP('',(#1944,#1950,#1956,#1963,#1968,#1975,#1980,#1985,#1990,#1996,#2001,#473));+#1944=ORIENTED_EDGE('',*,*,#1945,.F.);+#1945=EDGE_CURVE('',#1946,#475,#1948,.T.);+#1946=VERTEX_POINT('',#1947);+#1947=CARTESIAN_POINT('',(2.185,3.5,0.55));+#1948=LINE('',#1949,#822);+#1949=CARTESIAN_POINT('',(2.185,3.5,0.478548768437));+#1950=ORIENTED_EDGE('',*,*,#1951,.T.);+#1951=EDGE_CURVE('',#1946,#1952,#1954,.T.);+#1952=VERTEX_POINT('',#1953);+#1953=CARTESIAN_POINT('',(2.185,3.7,0.55));+#1954=LINE('',#1955,#964);+#1955=CARTESIAN_POINT('',(2.185,3.35,0.55));+#1956=ORIENTED_EDGE('',*,*,#1957,.T.);+#1957=EDGE_CURVE('',#1952,#1958,#1960,.T.);+#1958=VERTEX_POINT('',#1959);+#1959=CARTESIAN_POINT('',(2.185,3.798480775301,0.467364817767));+#1960=CIRCLE('',#1961,0.1);+#1961=AXIS2_PLACEMENT_3D('',#1962,#973,#974);+#1962=CARTESIAN_POINT('',(2.185,3.7,0.45));+#1963=ORIENTED_EDGE('',*,*,#1964,.T.);+#1964=EDGE_CURVE('',#1958,#1965,#1967,.T.);+#1965=VERTEX_POINT('',#1966);+#1966=CARTESIAN_POINT('',(2.185,3.847120194575,0.165270364467));+#1967=LINE('',#1959,#980);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#1965,#1970,#1972,.T.);+#1970=VERTEX_POINT('',#1971);+#1971=CARTESIAN_POINT('',(2.185,4.044081745177,-2.22044604925E-16));+#1972=CIRCLE('',#1973,0.2);+#1973=AXIS2_PLACEMENT_3D('',#1974,#261,#989);+#1974=CARTESIAN_POINT('',(2.185,4.044081745177,0.2));+#1975=ORIENTED_EDGE('',*,*,#1976,.T.);+#1976=EDGE_CURVE('',#1970,#1977,#1979,.T.);+#1977=VERTEX_POINT('',#1978);+#1978=CARTESIAN_POINT('',(2.185,4.5,-2.22044604925E-16));+#1979=LINE('',#1971,#964);+#1980=ORIENTED_EDGE('',*,*,#1981,.T.);+#1981=EDGE_CURVE('',#1977,#1982,#1984,.T.);+#1982=VERTEX_POINT('',#1983);+#1983=CARTESIAN_POINT('',(2.185,4.5,1.E-01));+#1984=LINE('',#1978,#822);+#1985=ORIENTED_EDGE('',*,*,#1986,.T.);+#1986=EDGE_CURVE('',#1982,#1987,#1989,.T.);+#1987=VERTEX_POINT('',#1988);+#1988=CARTESIAN_POINT('',(2.185,4.044081745177,1.E-01));+#1989=LINE('',#1983,#216);+#1990=ORIENTED_EDGE('',*,*,#1991,.T.);+#1991=EDGE_CURVE('',#1987,#1992,#1994,.T.);+#1992=VERTEX_POINT('',#1993);+#1993=CARTESIAN_POINT('',(2.185,3.945600969876,0.182635182233));+#1994=CIRCLE('',#1995,1.E-01);+#1995=AXIS2_PLACEMENT_3D('',#1974,#1011,#1012);+#1996=ORIENTED_EDGE('',*,*,#1997,.T.);+#1997=EDGE_CURVE('',#1992,#1998,#2000,.T.);+#1998=VERTEX_POINT('',#1999);+#1999=CARTESIAN_POINT('',(2.185,3.896961550602,0.484729635533));+#2000=LINE('',#1993,#1018);+#2001=ORIENTED_EDGE('',*,*,#2002,.T.);+#2002=EDGE_CURVE('',#1998,#470,#2003,.T.);+#2003=CIRCLE('',#2004,0.2);+#2004=AXIS2_PLACEMENT_3D('',#1962,#14,#1024);+#2005=PLANE('',#2006);+#2006=AXIS2_PLACEMENT_3D('',#2007,#261,#13);+#2007=CARTESIAN_POINT('',(2.185,3.912728288784,0.307097536874));+#2008=ADVANCED_FACE('',(#2009),#2016,.T.);+#2009=FACE_BOUND('',#2010,.F.);+#2010=EDGE_LOOP('',(#2011,#2001,#2014,#2015));+#2011=ORIENTED_EDGE('',*,*,#2012,.T.);+#2012=EDGE_CURVE('',#1930,#1998,#2013,.T.);+#2013=LINE('',#1931,#260);+#2014=ORIENTED_EDGE('',*,*,#469,.F.);+#2015=ORIENTED_EDGE('',*,*,#1934,.F.);+#2016=CYLINDRICAL_SURFACE('',#2017,0.2);+#2017=AXIS2_PLACEMENT_3D('',#1894,#973,#1024);+#2018=ADVANCED_FACE('',(#2019),#952,.F.);+#2019=FACE_BOUND('',#2020,.F.);+#2020=EDGE_LOOP('',(#1944,#2021,#2025,#2029));+#2021=ORIENTED_EDGE('',*,*,#2022,.T.);+#2022=EDGE_CURVE('',#1946,#2023,#946,.T.);+#2023=VERTEX_POINT('',#2024);+#2024=CARTESIAN_POINT('',(2.615,3.5,0.55));+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#2023,#490,#2027,.T.);+#2027=LINE('',#2028,#822);+#2028=CARTESIAN_POINT('',(2.615,3.5,0.478548768437));+#2029=ORIENTED_EDGE('',*,*,#489,.F.);+#2030=ADVANCED_FACE('',(#2031),#2090,.F.);+#2031=FACE_BOUND('',#2032,.F.);+#2032=EDGE_LOOP('',(#2033,#2034,#2040,#2047,#2052,#2059,#2064,#2069,#2074,#2080,#2085,#2089));+#2033=ORIENTED_EDGE('',*,*,#2026,.F.);+#2034=ORIENTED_EDGE('',*,*,#2035,.T.);+#2035=EDGE_CURVE('',#2023,#2036,#2038,.T.);+#2036=VERTEX_POINT('',#2037);+#2037=CARTESIAN_POINT('',(2.615,3.7,0.55));+#2038=LINE('',#2039,#964);+#2039=CARTESIAN_POINT('',(2.615,3.35,0.55));+#2040=ORIENTED_EDGE('',*,*,#2041,.T.);+#2041=EDGE_CURVE('',#2036,#2042,#2044,.T.);+#2042=VERTEX_POINT('',#2043);+#2043=CARTESIAN_POINT('',(2.615,3.798480775301,0.467364817767));+#2044=CIRCLE('',#2045,0.1);+#2045=AXIS2_PLACEMENT_3D('',#2046,#973,#974);+#2046=CARTESIAN_POINT('',(2.615,3.7,0.45));+#2047=ORIENTED_EDGE('',*,*,#2048,.T.);+#2048=EDGE_CURVE('',#2042,#2049,#2051,.T.);+#2049=VERTEX_POINT('',#2050);+#2050=CARTESIAN_POINT('',(2.615,3.847120194575,0.165270364467));+#2051=LINE('',#2043,#980);+#2052=ORIENTED_EDGE('',*,*,#2053,.T.);+#2053=EDGE_CURVE('',#2049,#2054,#2056,.T.);+#2054=VERTEX_POINT('',#2055);+#2055=CARTESIAN_POINT('',(2.615,4.044081745177,-2.22044604925E-16));+#2056=CIRCLE('',#2057,0.2);+#2057=AXIS2_PLACEMENT_3D('',#2058,#261,#989);+#2058=CARTESIAN_POINT('',(2.615,4.044081745177,0.2));+#2059=ORIENTED_EDGE('',*,*,#2060,.T.);+#2060=EDGE_CURVE('',#2054,#2061,#2063,.T.);+#2061=VERTEX_POINT('',#2062);+#2062=CARTESIAN_POINT('',(2.615,4.5,-2.22044604925E-16));+#2063=LINE('',#2055,#964);+#2064=ORIENTED_EDGE('',*,*,#2065,.T.);+#2065=EDGE_CURVE('',#2061,#2066,#2068,.T.);+#2066=VERTEX_POINT('',#2067);+#2067=CARTESIAN_POINT('',(2.615,4.5,1.E-01));+#2068=LINE('',#2062,#822);+#2069=ORIENTED_EDGE('',*,*,#2070,.T.);+#2070=EDGE_CURVE('',#2066,#2071,#2073,.T.);+#2071=VERTEX_POINT('',#2072);+#2072=CARTESIAN_POINT('',(2.615,4.044081745177,1.E-01));+#2073=LINE('',#2067,#216);+#2074=ORIENTED_EDGE('',*,*,#2075,.T.);+#2075=EDGE_CURVE('',#2071,#2076,#2078,.T.);+#2076=VERTEX_POINT('',#2077);+#2077=CARTESIAN_POINT('',(2.615,3.945600969876,0.182635182233));+#2078=CIRCLE('',#2079,1.E-01);+#2079=AXIS2_PLACEMENT_3D('',#2058,#1011,#1012);+#2080=ORIENTED_EDGE('',*,*,#2081,.T.);+#2081=EDGE_CURVE('',#2076,#2082,#2084,.T.);+#2082=VERTEX_POINT('',#2083);+#2083=CARTESIAN_POINT('',(2.615,3.896961550602,0.484729635533));+#2084=LINE('',#2077,#1018);+#2085=ORIENTED_EDGE('',*,*,#2086,.T.);+#2086=EDGE_CURVE('',#2082,#502,#2087,.T.);+#2087=CIRCLE('',#2088,0.2);+#2088=AXIS2_PLACEMENT_3D('',#2046,#14,#1024);+#2089=ORIENTED_EDGE('',*,*,#501,.T.);+#2090=PLANE('',#2091);+#2091=AXIS2_PLACEMENT_3D('',#2092,#261,#13);+#2092=CARTESIAN_POINT('',(2.615,3.912728288784,0.307097536874));+#2093=ADVANCED_FACE('',(#2094),#2157,.T.);+#2094=FACE_BOUND('',#2095,.T.);+#2095=EDGE_LOOP('',(#2096,#2102,#2108,#2115,#2120,#2127,#2132,#2137,#2142,#2148,#2153,#508));+#2096=ORIENTED_EDGE('',*,*,#2097,.F.);+#2097=EDGE_CURVE('',#2098,#510,#2100,.T.);+#2098=VERTEX_POINT('',#2099);+#2099=CARTESIAN_POINT('',(2.985,3.5,0.55));+#2100=LINE('',#2101,#822);+#2101=CARTESIAN_POINT('',(2.985,3.5,0.478548768437));+#2102=ORIENTED_EDGE('',*,*,#2103,.T.);+#2103=EDGE_CURVE('',#2098,#2104,#2106,.T.);+#2104=VERTEX_POINT('',#2105);+#2105=CARTESIAN_POINT('',(2.985,3.7,0.55));+#2106=LINE('',#2107,#964);+#2107=CARTESIAN_POINT('',(2.985,3.35,0.55));+#2108=ORIENTED_EDGE('',*,*,#2109,.T.);+#2109=EDGE_CURVE('',#2104,#2110,#2112,.T.);+#2110=VERTEX_POINT('',#2111);+#2111=CARTESIAN_POINT('',(2.985,3.798480775301,0.467364817767));+#2112=CIRCLE('',#2113,0.1);+#2113=AXIS2_PLACEMENT_3D('',#2114,#973,#974);+#2114=CARTESIAN_POINT('',(2.985,3.7,0.45));+#2115=ORIENTED_EDGE('',*,*,#2116,.T.);+#2116=EDGE_CURVE('',#2110,#2117,#2119,.T.);+#2117=VERTEX_POINT('',#2118);+#2118=CARTESIAN_POINT('',(2.985,3.847120194575,0.165270364467));+#2119=LINE('',#2111,#980);+#2120=ORIENTED_EDGE('',*,*,#2121,.T.);+#2121=EDGE_CURVE('',#2117,#2122,#2124,.T.);+#2122=VERTEX_POINT('',#2123);+#2123=CARTESIAN_POINT('',(2.985,4.044081745177,-2.22044604925E-16));+#2124=CIRCLE('',#2125,0.2);+#2125=AXIS2_PLACEMENT_3D('',#2126,#261,#989);+#2126=CARTESIAN_POINT('',(2.985,4.044081745177,0.2));+#2127=ORIENTED_EDGE('',*,*,#2128,.T.);+#2128=EDGE_CURVE('',#2122,#2129,#2131,.T.);+#2129=VERTEX_POINT('',#2130);+#2130=CARTESIAN_POINT('',(2.985,4.5,-2.22044604925E-16));+#2131=LINE('',#2123,#964);+#2132=ORIENTED_EDGE('',*,*,#2133,.T.);+#2133=EDGE_CURVE('',#2129,#2134,#2136,.T.);+#2134=VERTEX_POINT('',#2135);+#2135=CARTESIAN_POINT('',(2.985,4.5,1.E-01));+#2136=LINE('',#2130,#822);+#2137=ORIENTED_EDGE('',*,*,#2138,.T.);+#2138=EDGE_CURVE('',#2134,#2139,#2141,.T.);+#2139=VERTEX_POINT('',#2140);+#2140=CARTESIAN_POINT('',(2.985,4.044081745177,1.E-01));+#2141=LINE('',#2135,#216);+#2142=ORIENTED_EDGE('',*,*,#2143,.T.);+#2143=EDGE_CURVE('',#2139,#2144,#2146,.T.);+#2144=VERTEX_POINT('',#2145);+#2145=CARTESIAN_POINT('',(2.985,3.945600969876,0.182635182233));+#2146=CIRCLE('',#2147,1.E-01);+#2147=AXIS2_PLACEMENT_3D('',#2126,#1011,#1012);+#2148=ORIENTED_EDGE('',*,*,#2149,.T.);+#2149=EDGE_CURVE('',#2144,#2150,#2152,.T.);+#2150=VERTEX_POINT('',#2151);+#2151=CARTESIAN_POINT('',(2.985,3.896961550602,0.484729635533));+#2152=LINE('',#2145,#1018);+#2153=ORIENTED_EDGE('',*,*,#2154,.T.);+#2154=EDGE_CURVE('',#2150,#505,#2155,.T.);+#2155=CIRCLE('',#2156,0.2);+#2156=AXIS2_PLACEMENT_3D('',#2114,#14,#1024);+#2157=PLANE('',#2158);+#2158=AXIS2_PLACEMENT_3D('',#2159,#261,#13);+#2159=CARTESIAN_POINT('',(2.985,3.912728288784,0.307097536874));+#2160=ADVANCED_FACE('',(#2161),#2168,.T.);+#2161=FACE_BOUND('',#2162,.F.);+#2162=EDGE_LOOP('',(#2163,#2153,#2166,#2167));+#2163=ORIENTED_EDGE('',*,*,#2164,.T.);+#2164=EDGE_CURVE('',#2082,#2150,#2165,.T.);+#2165=LINE('',#2083,#260);+#2166=ORIENTED_EDGE('',*,*,#504,.F.);+#2167=ORIENTED_EDGE('',*,*,#2086,.F.);+#2168=CYLINDRICAL_SURFACE('',#2169,0.2);+#2169=AXIS2_PLACEMENT_3D('',#2046,#973,#1024);+#2170=ADVANCED_FACE('',(#2171),#2190,.F.);+#2171=FACE_BOUND('',#2172,.F.);+#2172=EDGE_LOOP('',(#2173,#2176,#2181,#2186,#2188,#2189));+#2173=ORIENTED_EDGE('',*,*,#2174,.F.);+#2174=EDGE_CURVE('',#2175,#534,#543,.T.);+#2175=VERTEX_POINT('',#544);+#2176=ORIENTED_EDGE('',*,*,#2177,.T.);+#2177=EDGE_CURVE('',#2175,#2178,#2180,.T.);+#2178=VERTEX_POINT('',#2179);+#2179=CARTESIAN_POINT('',(3.7,2.615,0.65));+#2180=LINE('',#544,#537);+#2181=ORIENTED_EDGE('',*,*,#2182,.T.);+#2182=EDGE_CURVE('',#2178,#2183,#2185,.T.);+#2183=VERTEX_POINT('',#2184);+#2184=CARTESIAN_POINT('',(3.5,2.615,0.65));+#2185=LINE('',#2179,#545);+#2186=ORIENTED_EDGE('',*,*,#2187,.T.);+#2187=EDGE_CURVE('',#2183,#595,#2185,.T.);+#2188=ORIENTED_EDGE('',*,*,#594,.F.);+#2189=ORIENTED_EDGE('',*,*,#540,.F.);+#2190=PLANE('',#2191);+#2191=AXIS2_PLACEMENT_3D('',#544,#273,#546);+#2192=ADVANCED_FACE('',(#2193),#2210,.F.);+#2193=FACE_BOUND('',#2194,.F.);+#2194=EDGE_LOOP('',(#2195,#2200,#2205,#2209));+#2195=ORIENTED_EDGE('',*,*,#2196,.F.);+#2196=EDGE_CURVE('',#2197,#529,#2199,.T.);+#2197=VERTEX_POINT('',#2198);+#2198=CARTESIAN_POINT('',(3.5,3.325,0.55));+#2199=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2198,#530),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2200=ORIENTED_EDGE('',*,*,#2201,.T.);+#2201=EDGE_CURVE('',#2197,#2202,#2204,.T.);+#2202=VERTEX_POINT('',#2203);+#2203=CARTESIAN_POINT('',(3.5,2.985,0.55));+#2204=LINE('',#2198,#537);+#2205=ORIENTED_EDGE('',*,*,#2206,.T.);+#2206=EDGE_CURVE('',#2202,#534,#2207,.T.);+#2207=LINE('',#2208,#822);+#2208=CARTESIAN_POINT('',(3.5,2.985,0.478548768437));+#2209=ORIENTED_EDGE('',*,*,#533,.F.);+#2210=PLANE('',#2211);+#2211=AXIS2_PLACEMENT_3D('',#530,#546,#538);+#2212=ADVANCED_FACE('',(#2213),#2225,.F.);+#2213=FACE_BOUND('',#2214,.F.);+#2214=EDGE_LOOP('',(#2215,#2220,#2221,#2222));+#2215=ORIENTED_EDGE('',*,*,#2216,.T.);+#2216=EDGE_CURVE('',#2217,#2197,#2219,.T.);+#2217=VERTEX_POINT('',#2218);+#2218=CARTESIAN_POINT('',(3.325,3.5,0.55));+#2219=LINE('',#2218,#137);+#2220=ORIENTED_EDGE('',*,*,#2196,.T.);+#2221=ORIENTED_EDGE('',*,*,#528,.F.);+#2222=ORIENTED_EDGE('',*,*,#2223,.F.);+#2223=EDGE_CURVE('',#2217,#525,#2224,.T.);+#2224=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2218,#526),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2225=PLANE('',#2226);+#2226=AXIS2_PLACEMENT_3D('',#526,#2227,#138);+#2227=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2228=ADVANCED_FACE('',(#2229),#952,.F.);+#2229=FACE_BOUND('',#2230,.F.);+#2230=EDGE_LOOP('',(#2096,#2231,#2233,#2234));+#2231=ORIENTED_EDGE('',*,*,#2232,.T.);+#2232=EDGE_CURVE('',#2098,#2217,#946,.T.);+#2233=ORIENTED_EDGE('',*,*,#2223,.T.);+#2234=ORIENTED_EDGE('',*,*,#524,.F.);+#2235=ADVANCED_FACE('',(#2236),#2259,.F.);+#2236=FACE_BOUND('',#2237,.F.);+#2237=EDGE_LOOP('',(#2238,#2246,#2254,#2255));+#2238=ORIENTED_EDGE('',*,*,#2239,.T.);+#2239=EDGE_CURVE('',#2240,#2242,#2244,.T.);+#2240=VERTEX_POINT('',#2241);+#2241=CARTESIAN_POINT('',(3.2875,-3.425,0.65));+#2242=VERTEX_POINT('',#2243);+#2243=CARTESIAN_POINT('',(3.24381999715,-3.3376399943,1.060996513181));+#2244=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2241,#2245),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2245=CARTESIAN_POINT('',(3.239674773624,-3.329349547248,1.1));+#2246=ORIENTED_EDGE('',*,*,#2247,.F.);+#2247=EDGE_CURVE('',#579,#2242,#2248,.T.);+#2248=B_SPLINE_CURVE_WITH_KNOTS('',2,(#2249,#2250,#2251,#2252,#2253),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#2249=CARTESIAN_POINT('',(3.450701309162,-3.130758682288,1.060996513181));+#2250=CARTESIAN_POINT('',(3.407270270542,-3.174189720907,1.060996513181));+#2251=CARTESIAN_POINT('',(3.290729995725,-3.290729995725,1.060996513181));+#2252=CARTESIAN_POINT('',(3.174189720907,-3.407270270542,1.060996513181));+#2253=CARTESIAN_POINT('',(3.130758682288,-3.450701309162,1.060996513181));+#2254=ORIENTED_EDGE('',*,*,#576,.F.);+#2255=ORIENTED_EDGE('',*,*,#2256,.T.);+#2256=EDGE_CURVE('',#577,#2240,#2257,.T.);+#2257=LINE('',#578,#2258);+#2258=VECTOR('',#2227,1.);+#2259=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#578,#582),(#2241,#2245)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2260=ADVANCED_FACE('',(#2261),#2281,.T.);+#2261=FACE_BOUND('',#2262,.T.);+#2262=EDGE_LOOP('',(#2263,#733,#2264,#583));+#2263=ORIENTED_EDGE('',*,*,#671,.T.);+#2264=ORIENTED_EDGE('',*,*,#2265,.F.);+#2265=EDGE_CURVE('',#579,#735,#2266,.T.);+#2266=B_SPLINE_CURVE_WITH_KNOTS('',7,(#2267,#2268,#2269,#2270,#2271,#2272,#2273,#2274,#2275,#2276,#2277,#2278,#2279,#2280),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290676316612,1.),.UNSPECIFIED.);+#2267=CARTESIAN_POINT('',(3.337636125417,-3.243823866033,1.060996513181));+#2268=CARTESIAN_POINT('',(3.337064523148,-3.243587100621,1.063531893801));+#2269=CARTESIAN_POINT('',(3.336327171489,-3.243281679563,1.066085943239));+#2270=CARTESIAN_POINT('',(3.335415599904,-3.242904094249,1.068641453668));+#2271=CARTESIAN_POINT('',(3.334324266833,-3.24245204929,1.071178193911));+#2272=CARTESIAN_POINT('',(3.333051271608,-3.241924757403,1.073674092128));+#2273=CARTESIAN_POINT('',(3.331599066364,-3.241323234296,1.076106418494));+#2274=CARTESIAN_POINT('',(3.326012445383,-3.239009180118,1.084179141528));+#2275=CARTESIAN_POINT('',(3.321027013711,-3.236944146471,1.089394353159));+#2276=CARTESIAN_POINT('',(3.315125645099,-3.234499720639,1.093781333253));+#2277=CARTESIAN_POINT('',(3.308576054906,-3.231786789275,1.097036580925));+#2278=CARTESIAN_POINT('',(3.301819857373,-3.228988283433,1.099068493706));+#2279=CARTESIAN_POINT('',(3.295175122061,-3.226235941784,1.100000203686));+#2280=CARTESIAN_POINT('',(3.288860345589,-3.223620276763,1.1));+#2281=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#586,#587,#588,#589,#590),(#2282,#2283,#2284,#2285,#2286),(#738,#739,#740,#741,#742)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,6.560327950568),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2282=CARTESIAN_POINT('',(3.329349547248,3.597392929117,1.1));+#2283=CARTESIAN_POINT('',(3.329349547248,3.438778452201,1.1));+#2284=CARTESIAN_POINT('',(3.329349547248,-3.344702200311E-15,1.1));+#2285=CARTESIAN_POINT('',(3.329349547248,-3.438778452201,1.1));+#2286=CARTESIAN_POINT('',(3.329349547248,-3.597392929117,1.1));+#2287=ADVANCED_FACE('',(#2288),#244,.F.);+#2288=FACE_BOUND('',#2289,.F.);+#2289=EDGE_LOOP('',(#2290,#2291,#2295,#2299));+#2290=ORIENTED_EDGE('',*,*,#2187,.F.);+#2291=ORIENTED_EDGE('',*,*,#2292,.T.);+#2292=EDGE_CURVE('',#2183,#2293,#536,.T.);+#2293=VERTEX_POINT('',#2294);+#2294=CARTESIAN_POINT('',(3.5,2.185,0.65));+#2295=ORIENTED_EDGE('',*,*,#2296,.T.);+#2296=EDGE_CURVE('',#2293,#599,#2297,.T.);+#2297=LINE('',#2298,#545);+#2298=CARTESIAN_POINT('',(3.7,2.185,0.65));+#2299=ORIENTED_EDGE('',*,*,#598,.F.);+#2300=ADVANCED_FACE('',(#2301),#2320,.F.);+#2301=FACE_BOUND('',#2302,.F.);+#2302=EDGE_LOOP('',(#2303,#2306,#2311,#2316,#2318,#2319));+#2303=ORIENTED_EDGE('',*,*,#2304,.F.);+#2304=EDGE_CURVE('',#2305,#2293,#2297,.T.);+#2305=VERTEX_POINT('',#2298);+#2306=ORIENTED_EDGE('',*,*,#2307,.T.);+#2307=EDGE_CURVE('',#2305,#2308,#2310,.T.);+#2308=VERTEX_POINT('',#2309);+#2309=CARTESIAN_POINT('',(3.7,1.815,0.65));+#2310=LINE('',#2298,#537);+#2311=ORIENTED_EDGE('',*,*,#2312,.T.);+#2312=EDGE_CURVE('',#2308,#2313,#2315,.T.);+#2313=VERTEX_POINT('',#2314);+#2314=CARTESIAN_POINT('',(3.5,1.815,0.65));+#2315=LINE('',#2309,#545);+#2316=ORIENTED_EDGE('',*,*,#2317,.T.);+#2317=EDGE_CURVE('',#2313,#603,#2315,.T.);+#2318=ORIENTED_EDGE('',*,*,#602,.F.);+#2319=ORIENTED_EDGE('',*,*,#2296,.F.);+#2320=PLANE('',#2321);+#2321=AXIS2_PLACEMENT_3D('',#2298,#273,#546);+#2322=ADVANCED_FACE('',(#2323),#244,.F.);+#2323=FACE_BOUND('',#2324,.F.);+#2324=EDGE_LOOP('',(#2325,#2326,#2330,#2334));+#2325=ORIENTED_EDGE('',*,*,#2317,.F.);+#2326=ORIENTED_EDGE('',*,*,#2327,.T.);+#2327=EDGE_CURVE('',#2313,#2328,#536,.T.);+#2328=VERTEX_POINT('',#2329);+#2329=CARTESIAN_POINT('',(3.5,1.385,0.65));+#2330=ORIENTED_EDGE('',*,*,#2331,.T.);+#2331=EDGE_CURVE('',#2328,#607,#2332,.T.);+#2332=LINE('',#2333,#545);+#2333=CARTESIAN_POINT('',(3.7,1.385,0.65));+#2334=ORIENTED_EDGE('',*,*,#606,.F.);+#2335=ADVANCED_FACE('',(#2336),#2355,.F.);+#2336=FACE_BOUND('',#2337,.F.);+#2337=EDGE_LOOP('',(#2338,#2341,#2346,#2351,#2353,#2354));+#2338=ORIENTED_EDGE('',*,*,#2339,.F.);+#2339=EDGE_CURVE('',#2340,#2328,#2332,.T.);+#2340=VERTEX_POINT('',#2333);+#2341=ORIENTED_EDGE('',*,*,#2342,.T.);+#2342=EDGE_CURVE('',#2340,#2343,#2345,.T.);+#2343=VERTEX_POINT('',#2344);+#2344=CARTESIAN_POINT('',(3.7,1.015,0.65));+#2345=LINE('',#2333,#537);+#2346=ORIENTED_EDGE('',*,*,#2347,.T.);+#2347=EDGE_CURVE('',#2343,#2348,#2350,.T.);+#2348=VERTEX_POINT('',#2349);+#2349=CARTESIAN_POINT('',(3.5,1.015,0.65));+#2350=LINE('',#2344,#545);+#2351=ORIENTED_EDGE('',*,*,#2352,.T.);+#2352=EDGE_CURVE('',#2348,#611,#2350,.T.);+#2353=ORIENTED_EDGE('',*,*,#610,.F.);+#2354=ORIENTED_EDGE('',*,*,#2331,.F.);+#2355=PLANE('',#2356);+#2356=AXIS2_PLACEMENT_3D('',#2333,#273,#546);+#2357=ADVANCED_FACE('',(#2358),#244,.F.);+#2358=FACE_BOUND('',#2359,.F.);+#2359=EDGE_LOOP('',(#2360,#2361,#2365,#2369));+#2360=ORIENTED_EDGE('',*,*,#2352,.F.);+#2361=ORIENTED_EDGE('',*,*,#2362,.T.);+#2362=EDGE_CURVE('',#2348,#2363,#536,.T.);+#2363=VERTEX_POINT('',#2364);+#2364=CARTESIAN_POINT('',(3.5,0.585,0.65));+#2365=ORIENTED_EDGE('',*,*,#2366,.T.);+#2366=EDGE_CURVE('',#2363,#615,#2367,.T.);+#2367=LINE('',#2368,#545);+#2368=CARTESIAN_POINT('',(3.7,0.585,0.65));+#2369=ORIENTED_EDGE('',*,*,#614,.F.);+#2370=ADVANCED_FACE('',(#2371),#2390,.F.);+#2371=FACE_BOUND('',#2372,.F.);+#2372=EDGE_LOOP('',(#2373,#2376,#2381,#2386,#2388,#2389));+#2373=ORIENTED_EDGE('',*,*,#2374,.F.);+#2374=EDGE_CURVE('',#2375,#2363,#2367,.T.);+#2375=VERTEX_POINT('',#2368);+#2376=ORIENTED_EDGE('',*,*,#2377,.T.);+#2377=EDGE_CURVE('',#2375,#2378,#2380,.T.);+#2378=VERTEX_POINT('',#2379);+#2379=CARTESIAN_POINT('',(3.7,0.215,0.65));+#2380=LINE('',#2368,#537);+#2381=ORIENTED_EDGE('',*,*,#2382,.T.);+#2382=EDGE_CURVE('',#2378,#2383,#2385,.T.);+#2383=VERTEX_POINT('',#2384);+#2384=CARTESIAN_POINT('',(3.5,0.215,0.65));+#2385=LINE('',#2379,#545);+#2386=ORIENTED_EDGE('',*,*,#2387,.T.);+#2387=EDGE_CURVE('',#2383,#619,#2385,.T.);+#2388=ORIENTED_EDGE('',*,*,#618,.F.);+#2389=ORIENTED_EDGE('',*,*,#2366,.F.);+#2390=PLANE('',#2391);+#2391=AXIS2_PLACEMENT_3D('',#2368,#273,#546);+#2392=ADVANCED_FACE('',(#2393),#244,.F.);+#2393=FACE_BOUND('',#2394,.F.);+#2394=EDGE_LOOP('',(#2395,#2396,#2400,#2404));+#2395=ORIENTED_EDGE('',*,*,#2387,.F.);+#2396=ORIENTED_EDGE('',*,*,#2397,.T.);+#2397=EDGE_CURVE('',#2383,#2398,#536,.T.);+#2398=VERTEX_POINT('',#2399);+#2399=CARTESIAN_POINT('',(3.5,-0.215,0.65));+#2400=ORIENTED_EDGE('',*,*,#2401,.T.);+#2401=EDGE_CURVE('',#2398,#623,#2402,.T.);+#2402=LINE('',#2403,#545);+#2403=CARTESIAN_POINT('',(3.7,-0.215,0.65));+#2404=ORIENTED_EDGE('',*,*,#622,.F.);+#2405=ADVANCED_FACE('',(#2406),#2425,.F.);+#2406=FACE_BOUND('',#2407,.F.);+#2407=EDGE_LOOP('',(#2408,#2411,#2416,#2421,#2423,#2424));+#2408=ORIENTED_EDGE('',*,*,#2409,.F.);+#2409=EDGE_CURVE('',#2410,#2398,#2402,.T.);+#2410=VERTEX_POINT('',#2403);+#2411=ORIENTED_EDGE('',*,*,#2412,.T.);+#2412=EDGE_CURVE('',#2410,#2413,#2415,.T.);+#2413=VERTEX_POINT('',#2414);+#2414=CARTESIAN_POINT('',(3.7,-0.585,0.65));+#2415=LINE('',#2403,#537);+#2416=ORIENTED_EDGE('',*,*,#2417,.T.);+#2417=EDGE_CURVE('',#2413,#2418,#2420,.T.);+#2418=VERTEX_POINT('',#2419);+#2419=CARTESIAN_POINT('',(3.5,-0.585,0.65));+#2420=LINE('',#2414,#545);+#2421=ORIENTED_EDGE('',*,*,#2422,.T.);+#2422=EDGE_CURVE('',#2418,#627,#2420,.T.);+#2423=ORIENTED_EDGE('',*,*,#626,.F.);+#2424=ORIENTED_EDGE('',*,*,#2401,.F.);+#2425=PLANE('',#2426);+#2426=AXIS2_PLACEMENT_3D('',#2403,#273,#546);+#2427=ADVANCED_FACE('',(#2428),#244,.F.);+#2428=FACE_BOUND('',#2429,.F.);+#2429=EDGE_LOOP('',(#2430,#2431,#2435,#2439));+#2430=ORIENTED_EDGE('',*,*,#2422,.F.);+#2431=ORIENTED_EDGE('',*,*,#2432,.T.);+#2432=EDGE_CURVE('',#2418,#2433,#536,.T.);+#2433=VERTEX_POINT('',#2434);+#2434=CARTESIAN_POINT('',(3.5,-1.015,0.65));+#2435=ORIENTED_EDGE('',*,*,#2436,.T.);+#2436=EDGE_CURVE('',#2433,#631,#2437,.T.);+#2437=LINE('',#2438,#545);+#2438=CARTESIAN_POINT('',(3.7,-1.015,0.65));+#2439=ORIENTED_EDGE('',*,*,#630,.F.);+#2440=ADVANCED_FACE('',(#2441),#2460,.F.);+#2441=FACE_BOUND('',#2442,.F.);+#2442=EDGE_LOOP('',(#2443,#2446,#2451,#2456,#2458,#2459));+#2443=ORIENTED_EDGE('',*,*,#2444,.F.);+#2444=EDGE_CURVE('',#2445,#2433,#2437,.T.);+#2445=VERTEX_POINT('',#2438);+#2446=ORIENTED_EDGE('',*,*,#2447,.T.);+#2447=EDGE_CURVE('',#2445,#2448,#2450,.T.);+#2448=VERTEX_POINT('',#2449);+#2449=CARTESIAN_POINT('',(3.7,-1.385,0.65));+#2450=LINE('',#2438,#537);+#2451=ORIENTED_EDGE('',*,*,#2452,.T.);+#2452=EDGE_CURVE('',#2448,#2453,#2455,.T.);+#2453=VERTEX_POINT('',#2454);+#2454=CARTESIAN_POINT('',(3.5,-1.385,0.65));+#2455=LINE('',#2449,#545);+#2456=ORIENTED_EDGE('',*,*,#2457,.T.);+#2457=EDGE_CURVE('',#2453,#635,#2455,.T.);+#2458=ORIENTED_EDGE('',*,*,#634,.F.);+#2459=ORIENTED_EDGE('',*,*,#2436,.F.);+#2460=PLANE('',#2461);+#2461=AXIS2_PLACEMENT_3D('',#2438,#273,#546);+#2462=ADVANCED_FACE('',(#2463),#244,.F.);+#2463=FACE_BOUND('',#2464,.F.);+#2464=EDGE_LOOP('',(#2465,#2466,#2470,#2474));+#2465=ORIENTED_EDGE('',*,*,#2457,.F.);+#2466=ORIENTED_EDGE('',*,*,#2467,.T.);+#2467=EDGE_CURVE('',#2453,#2468,#536,.T.);+#2468=VERTEX_POINT('',#2469);+#2469=CARTESIAN_POINT('',(3.5,-1.815,0.65));+#2470=ORIENTED_EDGE('',*,*,#2471,.T.);+#2471=EDGE_CURVE('',#2468,#639,#2472,.T.);+#2472=LINE('',#2473,#545);+#2473=CARTESIAN_POINT('',(3.7,-1.815,0.65));+#2474=ORIENTED_EDGE('',*,*,#638,.F.);+#2475=ADVANCED_FACE('',(#2476),#2495,.F.);+#2476=FACE_BOUND('',#2477,.F.);+#2477=EDGE_LOOP('',(#2478,#2481,#2486,#2491,#2493,#2494));+#2478=ORIENTED_EDGE('',*,*,#2479,.F.);+#2479=EDGE_CURVE('',#2480,#2468,#2472,.T.);+#2480=VERTEX_POINT('',#2473);+#2481=ORIENTED_EDGE('',*,*,#2482,.T.);+#2482=EDGE_CURVE('',#2480,#2483,#2485,.T.);+#2483=VERTEX_POINT('',#2484);+#2484=CARTESIAN_POINT('',(3.7,-2.185,0.65));+#2485=LINE('',#2473,#537);+#2486=ORIENTED_EDGE('',*,*,#2487,.T.);+#2487=EDGE_CURVE('',#2483,#2488,#2490,.T.);+#2488=VERTEX_POINT('',#2489);+#2489=CARTESIAN_POINT('',(3.5,-2.185,0.65));+#2490=LINE('',#2484,#545);+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2488,#643,#2490,.T.);+#2493=ORIENTED_EDGE('',*,*,#642,.F.);+#2494=ORIENTED_EDGE('',*,*,#2471,.F.);+#2495=PLANE('',#2496);+#2496=AXIS2_PLACEMENT_3D('',#2473,#273,#546);+#2497=ADVANCED_FACE('',(#2498),#244,.F.);+#2498=FACE_BOUND('',#2499,.F.);+#2499=EDGE_LOOP('',(#2500,#2501,#2505,#2509));+#2500=ORIENTED_EDGE('',*,*,#2492,.F.);+#2501=ORIENTED_EDGE('',*,*,#2502,.T.);+#2502=EDGE_CURVE('',#2488,#2503,#536,.T.);+#2503=VERTEX_POINT('',#2504);+#2504=CARTESIAN_POINT('',(3.5,-2.615,0.65));+#2505=ORIENTED_EDGE('',*,*,#2506,.T.);+#2506=EDGE_CURVE('',#2503,#647,#2507,.T.);+#2507=LINE('',#2508,#545);+#2508=CARTESIAN_POINT('',(3.7,-2.615,0.65));+#2509=ORIENTED_EDGE('',*,*,#646,.F.);+#2510=ADVANCED_FACE('',(#2511),#2530,.F.);+#2511=FACE_BOUND('',#2512,.F.);+#2512=EDGE_LOOP('',(#2513,#2516,#2521,#2526,#2528,#2529));+#2513=ORIENTED_EDGE('',*,*,#2514,.F.);+#2514=EDGE_CURVE('',#2515,#2503,#2507,.T.);+#2515=VERTEX_POINT('',#2508);+#2516=ORIENTED_EDGE('',*,*,#2517,.T.);+#2517=EDGE_CURVE('',#2515,#2518,#2520,.T.);+#2518=VERTEX_POINT('',#2519);+#2519=CARTESIAN_POINT('',(3.7,-2.985,0.65));+#2520=LINE('',#2508,#537);+#2521=ORIENTED_EDGE('',*,*,#2522,.T.);+#2522=EDGE_CURVE('',#2518,#2523,#2525,.T.);+#2523=VERTEX_POINT('',#2524);+#2524=CARTESIAN_POINT('',(3.5,-2.985,0.65));+#2525=LINE('',#2519,#545);+#2526=ORIENTED_EDGE('',*,*,#2527,.T.);+#2527=EDGE_CURVE('',#2523,#651,#2525,.T.);+#2528=ORIENTED_EDGE('',*,*,#650,.F.);+#2529=ORIENTED_EDGE('',*,*,#2506,.F.);+#2530=PLANE('',#2531);+#2531=AXIS2_PLACEMENT_3D('',#2508,#273,#546);+#2532=ADVANCED_FACE('',(#2533),#244,.F.);+#2533=FACE_BOUND('',#2534,.F.);+#2534=EDGE_LOOP('',(#2535,#2536,#2540,#2545,#2550,#2558,#2561,#2562));+#2535=ORIENTED_EDGE('',*,*,#2527,.F.);+#2536=ORIENTED_EDGE('',*,*,#2537,.T.);+#2537=EDGE_CURVE('',#2523,#2538,#536,.T.);+#2538=VERTEX_POINT('',#2539);+#2539=CARTESIAN_POINT('',(3.5,-3.325,0.65));+#2540=ORIENTED_EDGE('',*,*,#2541,.T.);+#2541=EDGE_CURVE('',#2538,#2542,#2544,.T.);+#2542=VERTEX_POINT('',#2543);+#2543=CARTESIAN_POINT('',(3.325,-3.5,0.65));+#2544=LINE('',#2539,#2258);+#2545=ORIENTED_EDGE('',*,*,#2546,.T.);+#2546=EDGE_CURVE('',#2542,#2547,#2549,.T.);+#2547=VERTEX_POINT('',#2548);+#2548=CARTESIAN_POINT('',(2.985,-3.5,0.65));+#2549=LINE('',#2543,#545);+#2550=ORIENTED_EDGE('',*,*,#2551,.T.);+#2551=EDGE_CURVE('',#2547,#2552,#2554,.T.);+#2552=VERTEX_POINT('',#2553);+#2553=CARTESIAN_POINT('',(2.985,-3.425,0.65));+#2554=LINE('',#2555,#2556);+#2555=CARTESIAN_POINT('',(2.985,-3.7,0.65));+#2556=VECTOR('',#2557,1.);+#2557=DIRECTION('',(1.110223024625E-16,1.,0.));+#2558=ORIENTED_EDGE('',*,*,#2559,.F.);+#2559=EDGE_CURVE('',#2240,#2552,#2560,.T.);+#2560=LINE('',#2241,#545);+#2561=ORIENTED_EDGE('',*,*,#2256,.F.);+#2562=ORIENTED_EDGE('',*,*,#654,.F.);+#2563=ADVANCED_FACE('',(#2564),#2583,.T.);+#2564=FACE_BOUND('',#2565,.T.);+#2565=EDGE_LOOP('',(#2566,#773,#2582,#862));+#2566=ORIENTED_EDGE('',*,*,#2567,.T.);+#2567=EDGE_CURVE('',#864,#765,#2568,.T.);+#2568=B_SPLINE_CURVE_WITH_KNOTS('',7,(#2569,#2570,#2571,#2572,#2573,#2574,#2575,#2576,#2577,#2578,#2579,#2580,#2581,#766),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290672594197,1.),.UNSPECIFIED.);+#2569=CARTESIAN_POINT('',(-3.337636125417,-3.243823866033,1.060996513181));+#2570=CARTESIAN_POINT('',(-3.337064530468,-3.243587103653,1.063531861332));+#2571=CARTESIAN_POINT('',(-3.336327190371,-3.243281687384,1.066085877829));+#2572=CARTESIAN_POINT('',(-3.335415634923,-3.242904108755,1.068641355493));+#2573=CARTESIAN_POINT('',(-3.334324322738,-3.242452072447,1.071178063967));+#2574=CARTESIAN_POINT('',(-3.333051353119,-3.241924791167,1.073673932313));+#2575=CARTESIAN_POINT('',(-3.331599177941,-3.241323280513,1.076106231607));+#2576=CARTESIAN_POINT('',(-3.326012602358,-3.239009245139,1.084178977304));+#2577=CARTESIAN_POINT('',(-3.321027168558,-3.236944210845,1.089394238093));+#2578=CARTESIAN_POINT('',(-3.315125782582,-3.234499776737,1.093781264853));+#2579=CARTESIAN_POINT('',(-3.308576161272,-3.231786834762,1.097036548997));+#2580=CARTESIAN_POINT('',(-3.301819927114,-3.228988310943,1.099068483897));+#2581=CARTESIAN_POINT('',(-3.295175155199,-3.226235956297,1.100000203694));+#2582=ORIENTED_EDGE('',*,*,#697,.F.);+#2583=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#867,#868,#869,#870,#871),(#2584,#2585,#2586,#2587,#2588),(#776,#777,#778,#779,#780)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,6.560327950568),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2584=CARTESIAN_POINT('',(-3.329349547248,-3.597392929117,1.1));+#2585=CARTESIAN_POINT('',(-3.329349547248,-3.438778452201,1.1));+#2586=CARTESIAN_POINT('',(-3.329349547248,2.018039864464E-16,1.1));+#2587=CARTESIAN_POINT('',(-3.329349547248,3.438778452201,1.1));+#2588=CARTESIAN_POINT('',(-3.329349547248,3.597392929117,1.1));+#2589=ADVANCED_FACE('',(#2590),#2620,.T.);+#2590=FACE_BOUND('',#2591,.T.);+#2591=EDGE_LOOP('',(#2592,#763,#2611,#2612));+#2592=ORIENTED_EDGE('',*,*,#2593,.T.);+#2593=EDGE_CURVE('',#2594,#755,#2596,.T.);+#2594=VERTEX_POINT('',#2595);+#2595=CARTESIAN_POINT('',(-3.243883862813,-3.337767725625,1.060395584541));+#2596=B_SPLINE_CURVE_WITH_KNOTS('',7,(#2597,#2598,#2599,#2600,#2601,#2602,#2603,#2604,#2605,#2606,#2607,#2608,#2609,#2610),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.287025739869,1.),.UNSPECIFIED.);+#2597=CARTESIAN_POINT('',(-3.243823866033,-3.337636125417,1.060996513181));+#2598=CARTESIAN_POINT('',(-3.243590074136,-3.33707170185,1.063500052185));+#2599=CARTESIAN_POINT('',(-3.243289339319,-3.336345663776,1.066021795974));+#2600=CARTESIAN_POINT('',(-3.242918286209,-3.335449862325,1.068545171289));+#2601=CARTESIAN_POINT('',(-3.24247468885,-3.334378923565,1.071050738929));+#2602=CARTESIAN_POINT('',(-3.241957750618,-3.333130924274,1.073517297564));+#2603=CARTESIAN_POINT('',(-3.241368384131,-3.331708067707,1.075922987542));+#2604=CARTESIAN_POINT('',(-3.239072795704,-3.326166026994,1.084017756892));+#2605=CARTESIAN_POINT('',(-3.237006977938,-3.321178701923,1.089281210497));+#2606=CARTESIAN_POINT('',(-3.234555554287,-3.315260440785,1.093714054636));+#2607=CARTESIAN_POINT('',(-3.231830003213,-3.308680380332,1.097005181254));+#2608=CARTESIAN_POINT('',(-3.229016615441,-3.301888259063,1.099058851353));+#2609=CARTESIAN_POINT('',(-3.226249404295,-3.295207622193,1.100000210007));+#2610=CARTESIAN_POINT('',(-3.223620276598,-3.288860345589,1.1));+#2611=ORIENTED_EDGE('',*,*,#2567,.F.);+#2612=ORIENTED_EDGE('',*,*,#2613,.F.);+#2613=EDGE_CURVE('',#2594,#864,#2614,.T.);+#2614=B_SPLINE_CURVE_WITH_KNOTS('',2,(#2615,#2616,#2617,#2618,#2619),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.);+#2615=CARTESIAN_POINT('',(-3.130758682288,-3.450701309162,1.060996513181));+#2616=CARTESIAN_POINT('',(-3.174189720907,-3.407270270542,1.060996513181));+#2617=CARTESIAN_POINT('',(-3.290729995725,-3.290729995725,1.060996513181));+#2618=CARTESIAN_POINT('',(-3.407270270542,-3.174189720907,1.060996513181));+#2619=CARTESIAN_POINT('',(-3.450701309162,-3.130758682288,1.060996513181));+#2620=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#2615,#2616,#2617,#2618,#2619),(#2621,#2622,#2623,#2624,#2625),(#768,#769,#770,#771,#772)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.206784146731),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2621=CARTESIAN_POINT('',(-3.124540846999,-3.444483473874,1.1));+#2622=CARTESIAN_POINT('',(-3.167971885619,-3.401052435254,1.1));+#2623=CARTESIAN_POINT('',(-3.284512160436,-3.284512160436,1.1));+#2624=CARTESIAN_POINT('',(-3.401052435254,-3.167971885619,1.1));+#2625=CARTESIAN_POINT('',(-3.444483473874,-3.124540846999,1.1));+#2626=ADVANCED_FACE('',(#2627),#2646,.T.);+#2627=FACE_BOUND('',#2628,.T.);+#2628=EDGE_LOOP('',(#2629,#743,#2630,#2246));+#2629=ORIENTED_EDGE('',*,*,#2265,.T.);+#2630=ORIENTED_EDGE('',*,*,#2631,.F.);+#2631=EDGE_CURVE('',#2242,#745,#2632,.T.);+#2632=B_SPLINE_CURVE_WITH_KNOTS('',7,(#2633,#2634,#2635,#2636,#2637,#2638,#2639,#2640,#2641,#2642,#2643,#2644,#2645,#746),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.286680792148,1.),.UNSPECIFIED.);+#2633=CARTESIAN_POINT('',(3.243823866033,-3.337636125417,1.060996513181));+#2634=CARTESIAN_POINT('',(3.243590355108,-3.337072380174,1.063497043429));+#2635=CARTESIAN_POINT('',(3.24329006196,-3.336347408385,1.066015734973));+#2636=CARTESIAN_POINT('',(3.242919623636,-3.335453091159,1.068536073664));+#2637=CARTESIAN_POINT('',(3.242476820726,-3.334384070369,1.071038693924));+#2638=CARTESIAN_POINT('',(3.241960855868,-3.33313842101,1.073502475387));+#2639=CARTESIAN_POINT('',(3.241372632239,-3.331718323548,1.075905639529));+#2640=CARTESIAN_POINT('',(3.239078791164,-3.326180501314,1.084002473472));+#2641=CARTESIAN_POINT('',(3.237012907485,-3.321193016919,1.089270490344));+#2642=CARTESIAN_POINT('',(3.234560828938,-3.315273175634,1.093707671457));+#2643=CARTESIAN_POINT('',(3.231834086482,-3.308690237015,1.097002214065));+#2644=CARTESIAN_POINT('',(3.229019293316,-3.301894725178,1.099057930414));+#2645=CARTESIAN_POINT('',(3.226250676282,-3.295210692388,1.100000213604));+#2646=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#2249,#2250,#2251,#2252,#2253),(#2647,#2648,#2649,#2650,#2651),(#748,#749,#750,#751,#752)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.206784146731),(-0.162823960534,-3.998243284625E-02,0.166801713885,0.289643241573),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2647=CARTESIAN_POINT('',(3.444483473874,-3.124540846999,1.1));+#2648=CARTESIAN_POINT('',(3.401052435254,-3.167971885619,1.1));+#2649=CARTESIAN_POINT('',(3.284512160436,-3.284512160436,1.1));+#2650=CARTESIAN_POINT('',(3.167971885619,-3.401052435254,1.1));+#2651=CARTESIAN_POINT('',(3.124540846999,-3.444483473874,1.1));+#2652=ADVANCED_FACE('',(#2653),#2665,.T.);+#2653=FACE_BOUND('',#2654,.T.);+#2654=EDGE_LOOP('',(#2655,#753,#2656,#2657));+#2655=ORIENTED_EDGE('',*,*,#2631,.T.);+#2656=ORIENTED_EDGE('',*,*,#2593,.F.);+#2657=ORIENTED_EDGE('',*,*,#2658,.F.);+#2658=EDGE_CURVE('',#2242,#2594,#2659,.T.);+#2659=B_SPLINE_CURVE_WITH_KNOTS('',2,(#2660,#2661,#2662,#2663,#2664),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.);+#2660=CARTESIAN_POINT('',(3.597392929117,-3.337767725625,1.060395584541));+#2661=CARTESIAN_POINT('',(3.438778452201,-3.337767725625,1.060395584541));+#2662=CARTESIAN_POINT('',(8.146558678341E-16,-3.337767725625,1.060395584541));+#2663=CARTESIAN_POINT('',(-3.438778452201,-3.337767725625,1.060395584541));+#2664=CARTESIAN_POINT('',(-3.597392929117,-3.337767725625,1.060395584541));+#2665=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#2660,#2661,#2662,#2663,#2664),(#2666,#2667,#2668,#2669,#2670),(#758,#759,#760,#761,#762)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,6.560327950568),(-0.357718155493,-4.048920165976E-02,6.519838748908,6.837067702742),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#2666=CARTESIAN_POINT('',(3.597392929117,-3.329349547248,1.1));+#2667=CARTESIAN_POINT('',(3.438778452201,-3.329349547248,1.1));+#2668=CARTESIAN_POINT('',(1.226786110765E-15,-3.329349547248,1.1));+#2669=CARTESIAN_POINT('',(-3.438778452201,-3.329349547248,1.1));+#2670=CARTESIAN_POINT('',(-3.597392929117,-3.329349547248,1.1));+#2671=ADVANCED_FACE('',(#2672),#2673,.F.);+#2672=FACE_BOUND('',#782,.T.);+#2673=PLANE('',#2674);+#2674=AXIS2_PLACEMENT_3D('',#789,#273,#538);+#2675=ADVANCED_FACE('',(#2676),#2692,.F.);+#2676=FACE_BOUND('',#2677,.F.);+#2677=EDGE_LOOP('',(#2678,#2685,#2688,#2689));+#2678=ORIENTED_EDGE('',*,*,#2679,.T.);+#2679=EDGE_CURVE('',#2680,#2682,#2684,.T.);+#2680=VERTEX_POINT('',#2681);+#2681=CARTESIAN_POINT('',(-3.404349547248,3.277174773624,0.1));+#2682=VERTEX_POINT('',#2683);+#2683=CARTESIAN_POINT('',(-3.277174773624,3.404349547248,0.1));+#2684=LINE('',#2681,#205);+#2685=ORIENTED_EDGE('',*,*,#2686,.T.);+#2686=EDGE_CURVE('',#2682,#801,#2687,.T.);+#2687=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2683,#802),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2688=ORIENTED_EDGE('',*,*,#798,.F.);+#2689=ORIENTED_EDGE('',*,*,#2690,.F.);+#2690=EDGE_CURVE('',#2680,#799,#2691,.T.);+#2691=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2681,#800),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2692=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2681,#800),(#2683,#802)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2693=ADVANCED_FACE('',(#2694),#2765,.T.);+#2694=FACE_BOUND('',#2695,.T.);+#2695=EDGE_LOOP('',(#816,#2696,#2704,#2713,#2720,#2729,#2734,#2739,#2744,#2752,#2759,#847));+#2696=ORIENTED_EDGE('',*,*,#2697,.T.);+#2697=EDGE_CURVE('',#818,#2698,#2700,.T.);+#2698=VERTEX_POINT('',#2699);+#2699=CARTESIAN_POINT('',(-3.7,2.985,0.55));+#2700=LINE('',#2701,#2702);+#2701=CARTESIAN_POINT('',(-3.35,2.985,0.55));+#2702=VECTOR('',#2703,1.);+#2703=DIRECTION('',(-1.,1.144237745222E-17,0.));+#2704=ORIENTED_EDGE('',*,*,#2705,.T.);+#2705=EDGE_CURVE('',#2698,#2706,#2708,.T.);+#2706=VERTEX_POINT('',#2707);+#2707=CARTESIAN_POINT('',(-3.798480775301,2.985,0.467364817767));+#2708=CIRCLE('',#2709,0.1);+#2709=AXIS2_PLACEMENT_3D('',#2710,#2711,#2712);+#2710=CARTESIAN_POINT('',(-3.7,2.985,0.45));+#2711=DIRECTION('',(-1.144237745222E-17,-1.,4.379057701015E-47));+#2712=DIRECTION('',(-4.440892098501E-15,5.081436361562E-32,1.));+#2713=ORIENTED_EDGE('',*,*,#2714,.T.);+#2714=EDGE_CURVE('',#2706,#2715,#2717,.T.);+#2715=VERTEX_POINT('',#2716);+#2716=CARTESIAN_POINT('',(-3.847120194575,2.985,0.165270364467));+#2717=LINE('',#2707,#2718);+#2718=VECTOR('',#2719,1.);+#2719=DIRECTION('',(-0.158960115908,1.818881646068E-18,-0.987285005229));+#2720=ORIENTED_EDGE('',*,*,#2721,.T.);+#2721=EDGE_CURVE('',#2715,#2722,#2724,.T.);+#2722=VERTEX_POINT('',#2723);+#2723=CARTESIAN_POINT('',(-4.044081745177,2.985,-2.22044604925E-16));+#2724=CIRCLE('',#2725,0.2);+#2725=AXIS2_PLACEMENT_3D('',#2726,#2727,#2728);+#2726=CARTESIAN_POINT('',(-4.044081745177,2.985,0.2));+#2727=DIRECTION('',(1.144237745222E-17,1.,1.925929944387E-33));+#2728=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#2729=ORIENTED_EDGE('',*,*,#2730,.T.);+#2730=EDGE_CURVE('',#2722,#2731,#2733,.T.);+#2731=VERTEX_POINT('',#2732);+#2732=CARTESIAN_POINT('',(-4.5,2.985,-2.22044604925E-16));+#2733=LINE('',#2723,#2702);+#2734=ORIENTED_EDGE('',*,*,#2735,.T.);+#2735=EDGE_CURVE('',#2731,#2736,#2738,.T.);+#2736=VERTEX_POINT('',#2737);+#2737=CARTESIAN_POINT('',(-4.5,2.985,1.E-01));+#2738=LINE('',#2732,#822);+#2739=ORIENTED_EDGE('',*,*,#2740,.T.);+#2740=EDGE_CURVE('',#2736,#2741,#2743,.T.);+#2741=VERTEX_POINT('',#2742);+#2742=CARTESIAN_POINT('',(-4.044081745177,2.985,1.E-01));+#2743=LINE('',#2737,#238);+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#2741,#2746,#2748,.T.);+#2746=VERTEX_POINT('',#2747);+#2747=CARTESIAN_POINT('',(-3.945600969876,2.985,0.182635182233));+#2748=CIRCLE('',#2749,1.E-01);+#2749=AXIS2_PLACEMENT_3D('',#2726,#2750,#2751);+#2750=DIRECTION('',(-1.144237745222E-17,-1.,-4.379057701015E-47));+#2751=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#2752=ORIENTED_EDGE('',*,*,#2753,.T.);+#2753=EDGE_CURVE('',#2746,#2754,#2756,.T.);+#2754=VERTEX_POINT('',#2755);+#2755=CARTESIAN_POINT('',(-3.896961550602,2.985,0.484729635533));+#2756=LINE('',#2747,#2757);+#2757=VECTOR('',#2758,1.);+#2758=DIRECTION('',(0.158960115908,-1.818881646068E-18,0.987285005229));+#2759=ORIENTED_EDGE('',*,*,#2760,.T.);+#2760=EDGE_CURVE('',#2754,#843,#2761,.T.);+#2761=CIRCLE('',#2762,0.2);+#2762=AXIS2_PLACEMENT_3D('',#2710,#2763,#2764);+#2763=DIRECTION('',(1.144237745222E-17,1.,2.311115933265E-33));+#2764=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#2765=PLANE('',#2766);+#2766=AXIS2_PLACEMENT_3D('',#2767,#846,#13);+#2767=CARTESIAN_POINT('',(-3.912728288784,2.985,0.307097536874));+#2768=ADVANCED_FACE('',(#2769),#2844,.F.);+#2769=FACE_BOUND('',#2770,.F.);+#2770=EDGE_LOOP('',(#2771,#2776,#2777,#2778,#2782,#2786,#2790,#2794,#2798,#2802,#2806,#2810,#2814,#2818,#2822,#2826,#2830,#2834,#2838,#2841));+#2771=ORIENTED_EDGE('',*,*,#2772,.T.);+#2772=EDGE_CURVE('',#2773,#2680,#2775,.T.);+#2773=VERTEX_POINT('',#2774);+#2774=CARTESIAN_POINT('',(-3.404349547248,-3.277174773624,0.1));+#2775=LINE('',#2774,#230);+#2776=ORIENTED_EDGE('',*,*,#2690,.T.);+#2777=ORIENTED_EDGE('',*,*,#824,.F.);+#2778=ORIENTED_EDGE('',*,*,#2779,.F.);+#2779=EDGE_CURVE('',#2780,#818,#825,.T.);+#2780=VERTEX_POINT('',#2781);+#2781=CARTESIAN_POINT('',(-3.5,2.615,0.55));+#2782=ORIENTED_EDGE('',*,*,#2783,.F.);+#2783=EDGE_CURVE('',#2784,#2780,#825,.T.);+#2784=VERTEX_POINT('',#2785);+#2785=CARTESIAN_POINT('',(-3.5,2.185,0.55));+#2786=ORIENTED_EDGE('',*,*,#2787,.F.);+#2787=EDGE_CURVE('',#2788,#2784,#825,.T.);+#2788=VERTEX_POINT('',#2789);+#2789=CARTESIAN_POINT('',(-3.5,1.815,0.55));+#2790=ORIENTED_EDGE('',*,*,#2791,.F.);+#2791=EDGE_CURVE('',#2792,#2788,#825,.T.);+#2792=VERTEX_POINT('',#2793);+#2793=CARTESIAN_POINT('',(-3.5,1.385,0.55));+#2794=ORIENTED_EDGE('',*,*,#2795,.F.);+#2795=EDGE_CURVE('',#2796,#2792,#825,.T.);+#2796=VERTEX_POINT('',#2797);+#2797=CARTESIAN_POINT('',(-3.5,1.015,0.55));+#2798=ORIENTED_EDGE('',*,*,#2799,.F.);+#2799=EDGE_CURVE('',#2800,#2796,#825,.T.);+#2800=VERTEX_POINT('',#2801);+#2801=CARTESIAN_POINT('',(-3.5,0.585,0.55));+#2802=ORIENTED_EDGE('',*,*,#2803,.F.);+#2803=EDGE_CURVE('',#2804,#2800,#825,.T.);+#2804=VERTEX_POINT('',#2805);+#2805=CARTESIAN_POINT('',(-3.5,0.215,0.55));+#2806=ORIENTED_EDGE('',*,*,#2807,.F.);+#2807=EDGE_CURVE('',#2808,#2804,#825,.T.);+#2808=VERTEX_POINT('',#2809);+#2809=CARTESIAN_POINT('',(-3.5,-0.215,0.55));+#2810=ORIENTED_EDGE('',*,*,#2811,.F.);+#2811=EDGE_CURVE('',#2812,#2808,#825,.T.);+#2812=VERTEX_POINT('',#2813);+#2813=CARTESIAN_POINT('',(-3.5,-0.585,0.55));+#2814=ORIENTED_EDGE('',*,*,#2815,.F.);+#2815=EDGE_CURVE('',#2816,#2812,#825,.T.);+#2816=VERTEX_POINT('',#2817);+#2817=CARTESIAN_POINT('',(-3.5,-1.015,0.55));+#2818=ORIENTED_EDGE('',*,*,#2819,.F.);+#2819=EDGE_CURVE('',#2820,#2816,#825,.T.);+#2820=VERTEX_POINT('',#2821);+#2821=CARTESIAN_POINT('',(-3.5,-1.385,0.55));+#2822=ORIENTED_EDGE('',*,*,#2823,.F.);+#2823=EDGE_CURVE('',#2824,#2820,#825,.T.);+#2824=VERTEX_POINT('',#2825);+#2825=CARTESIAN_POINT('',(-3.5,-1.815,0.55));+#2826=ORIENTED_EDGE('',*,*,#2827,.F.);+#2827=EDGE_CURVE('',#2828,#2824,#825,.T.);+#2828=VERTEX_POINT('',#2829);+#2829=CARTESIAN_POINT('',(-3.5,-2.185,0.55));+#2830=ORIENTED_EDGE('',*,*,#2831,.F.);+#2831=EDGE_CURVE('',#2832,#2828,#825,.T.);+#2832=VERTEX_POINT('',#2833);+#2833=CARTESIAN_POINT('',(-3.5,-2.615,0.55));+#2834=ORIENTED_EDGE('',*,*,#2835,.F.);+#2835=EDGE_CURVE('',#2836,#2832,#825,.T.);+#2836=VERTEX_POINT('',#2837);+#2837=CARTESIAN_POINT('',(-3.5,-2.985,0.55));+#2838=ORIENTED_EDGE('',*,*,#2839,.F.);+#2839=EDGE_CURVE('',#2840,#2836,#825,.T.);+#2840=VERTEX_POINT('',#826);+#2841=ORIENTED_EDGE('',*,*,#2842,.F.);+#2842=EDGE_CURVE('',#2773,#2840,#2843,.T.);+#2843=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2774,#826),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2844=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2774,#826),(#2681,#800)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2845=ADVANCED_FACE('',(#2846),#2908,.F.);+#2846=FACE_BOUND('',#2847,.F.);+#2847=EDGE_LOOP('',(#2848,#2852,#2858,#2865,#2870,#2877,#2882,#2887,#2892,#2898,#2903,#2907));+#2848=ORIENTED_EDGE('',*,*,#2849,.F.);+#2849=EDGE_CURVE('',#2780,#838,#2850,.T.);+#2850=LINE('',#2851,#822);+#2851=CARTESIAN_POINT('',(-3.5,2.615,0.478548768437));+#2852=ORIENTED_EDGE('',*,*,#2853,.T.);+#2853=EDGE_CURVE('',#2780,#2854,#2856,.T.);+#2854=VERTEX_POINT('',#2855);+#2855=CARTESIAN_POINT('',(-3.7,2.615,0.55));+#2856=LINE('',#2857,#2702);+#2857=CARTESIAN_POINT('',(-3.35,2.615,0.55));+#2858=ORIENTED_EDGE('',*,*,#2859,.T.);+#2859=EDGE_CURVE('',#2854,#2860,#2862,.T.);+#2860=VERTEX_POINT('',#2861);+#2861=CARTESIAN_POINT('',(-3.798480775301,2.615,0.467364817767));+#2862=CIRCLE('',#2863,0.1);+#2863=AXIS2_PLACEMENT_3D('',#2864,#2711,#2712);+#2864=CARTESIAN_POINT('',(-3.7,2.615,0.45));+#2865=ORIENTED_EDGE('',*,*,#2866,.T.);+#2866=EDGE_CURVE('',#2860,#2867,#2869,.T.);+#2867=VERTEX_POINT('',#2868);+#2868=CARTESIAN_POINT('',(-3.847120194575,2.615,0.165270364467));+#2869=LINE('',#2861,#2718);+#2870=ORIENTED_EDGE('',*,*,#2871,.T.);+#2871=EDGE_CURVE('',#2867,#2872,#2874,.T.);+#2872=VERTEX_POINT('',#2873);+#2873=CARTESIAN_POINT('',(-4.044081745177,2.615,-2.22044604925E-16));+#2874=CIRCLE('',#2875,0.2);+#2875=AXIS2_PLACEMENT_3D('',#2876,#2727,#2728);+#2876=CARTESIAN_POINT('',(-4.044081745177,2.615,0.2));+#2877=ORIENTED_EDGE('',*,*,#2878,.T.);+#2878=EDGE_CURVE('',#2872,#2879,#2881,.T.);+#2879=VERTEX_POINT('',#2880);+#2880=CARTESIAN_POINT('',(-4.5,2.615,-2.22044604925E-16));+#2881=LINE('',#2873,#2702);+#2882=ORIENTED_EDGE('',*,*,#2883,.T.);+#2883=EDGE_CURVE('',#2879,#2884,#2886,.T.);+#2884=VERTEX_POINT('',#2885);+#2885=CARTESIAN_POINT('',(-4.5,2.615,1.E-01));+#2886=LINE('',#2880,#822);+#2887=ORIENTED_EDGE('',*,*,#2888,.T.);+#2888=EDGE_CURVE('',#2884,#2889,#2891,.T.);+#2889=VERTEX_POINT('',#2890);+#2890=CARTESIAN_POINT('',(-4.044081745177,2.615,1.E-01));+#2891=LINE('',#2885,#238);+#2892=ORIENTED_EDGE('',*,*,#2893,.T.);+#2893=EDGE_CURVE('',#2889,#2894,#2896,.T.);+#2894=VERTEX_POINT('',#2895);+#2895=CARTESIAN_POINT('',(-3.945600969876,2.615,0.182635182233));+#2896=CIRCLE('',#2897,1.E-01);+#2897=AXIS2_PLACEMENT_3D('',#2876,#2750,#2751);+#2898=ORIENTED_EDGE('',*,*,#2899,.T.);+#2899=EDGE_CURVE('',#2894,#2900,#2902,.T.);+#2900=VERTEX_POINT('',#2901);+#2901=CARTESIAN_POINT('',(-3.896961550602,2.615,0.484729635533));+#2902=LINE('',#2895,#2757);+#2903=ORIENTED_EDGE('',*,*,#2904,.T.);+#2904=EDGE_CURVE('',#2900,#836,#2905,.T.);+#2905=CIRCLE('',#2906,0.2);+#2906=AXIS2_PLACEMENT_3D('',#2864,#2763,#2764);+#2907=ORIENTED_EDGE('',*,*,#835,.T.);+#2908=PLANE('',#2909);+#2909=AXIS2_PLACEMENT_3D('',#2910,#846,#13);+#2910=CARTESIAN_POINT('',(-3.912728288784,2.615,0.307097536874));+#2911=ADVANCED_FACE('',(#2912),#244,.F.);+#2912=FACE_BOUND('',#2913,.F.);+#2913=EDGE_LOOP('',(#2914,#2918,#2919,#2920));+#2914=ORIENTED_EDGE('',*,*,#2915,.T.);+#2915=EDGE_CURVE('',#2916,#838,#242,.T.);+#2916=VERTEX_POINT('',#2917);+#2917=CARTESIAN_POINT('',(-3.5,2.185,0.65));+#2918=ORIENTED_EDGE('',*,*,#855,.T.);+#2919=ORIENTED_EDGE('',*,*,#934,.F.);+#2920=ORIENTED_EDGE('',*,*,#2921,.F.);+#2921=EDGE_CURVE('',#2916,#931,#2922,.T.);+#2922=LINE('',#2923,#238);+#2923=CARTESIAN_POINT('',(-3.7,2.185,0.65));+#2924=ADVANCED_FACE('',(#2925),#2932,.T.);+#2925=FACE_BOUND('',#2926,.F.);+#2926=EDGE_LOOP('',(#2927,#2759,#2930,#2931));+#2927=ORIENTED_EDGE('',*,*,#2928,.T.);+#2928=EDGE_CURVE('',#2900,#2754,#2929,.T.);+#2929=LINE('',#2901,#845);+#2930=ORIENTED_EDGE('',*,*,#842,.F.);+#2931=ORIENTED_EDGE('',*,*,#2904,.F.);+#2932=CYLINDRICAL_SURFACE('',#2933,0.2);+#2933=AXIS2_PLACEMENT_3D('',#2864,#2934,#2764);+#2934=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2935=ADVANCED_FACE('',(#2936),#244,.F.);+#2936=FACE_BOUND('',#2937,.F.);+#2937=EDGE_LOOP('',(#2938,#2943,#2947,#2948,#2955,#2959,#2965,#2969));+#2938=ORIENTED_EDGE('',*,*,#2939,.T.);+#2939=EDGE_CURVE('',#2940,#2941,#242,.T.);+#2940=VERTEX_POINT('',#243);+#2941=VERTEX_POINT('',#2942);+#2942=CARTESIAN_POINT('',(-3.5,-2.985,0.65));+#2943=ORIENTED_EDGE('',*,*,#2944,.T.);+#2944=EDGE_CURVE('',#2941,#879,#2945,.T.);+#2945=LINE('',#2946,#238);+#2946=CARTESIAN_POINT('',(-3.7,-2.985,0.65));+#2947=ORIENTED_EDGE('',*,*,#878,.F.);+#2948=ORIENTED_EDGE('',*,*,#2949,.F.);+#2949=EDGE_CURVE('',#2950,#874,#2952,.T.);+#2950=VERTEX_POINT('',#2951);+#2951=CARTESIAN_POINT('',(-3.2875,-3.425,0.65));+#2952=LINE('',#2951,#2953);+#2953=VECTOR('',#2954,1.);+#2954=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2955=ORIENTED_EDGE('',*,*,#2956,.F.);+#2956=EDGE_CURVE('',#2957,#2950,#2560,.T.);+#2957=VERTEX_POINT('',#2958);+#2958=CARTESIAN_POINT('',(-2.985,-3.425,0.65));+#2959=ORIENTED_EDGE('',*,*,#2960,.F.);+#2960=EDGE_CURVE('',#2961,#2957,#2963,.T.);+#2961=VERTEX_POINT('',#2962);+#2962=CARTESIAN_POINT('',(-2.985,-3.5,0.65));+#2963=LINE('',#2964,#2556);+#2964=CARTESIAN_POINT('',(-2.985,-3.7,0.65));+#2965=ORIENTED_EDGE('',*,*,#2966,.T.);+#2966=EDGE_CURVE('',#2961,#2967,#2549,.T.);+#2967=VERTEX_POINT('',#2968);+#2968=CARTESIAN_POINT('',(-3.325,-3.5,0.65));+#2969=ORIENTED_EDGE('',*,*,#2970,.T.);+#2970=EDGE_CURVE('',#2967,#2940,#2971,.T.);+#2971=LINE('',#2968,#2953);+#2972=ADVANCED_FACE('',(#2973),#2992,.F.);+#2973=FACE_BOUND('',#2974,.F.);+#2974=EDGE_LOOP('',(#2975,#2978,#2983,#2988,#2990,#2991));+#2975=ORIENTED_EDGE('',*,*,#2976,.F.);+#2976=EDGE_CURVE('',#2977,#2941,#2945,.T.);+#2977=VERTEX_POINT('',#2946);+#2978=ORIENTED_EDGE('',*,*,#2979,.T.);+#2979=EDGE_CURVE('',#2977,#2980,#2982,.T.);+#2980=VERTEX_POINT('',#2981);+#2981=CARTESIAN_POINT('',(-3.7,-2.615,0.65));+#2982=LINE('',#2946,#845);+#2983=ORIENTED_EDGE('',*,*,#2984,.T.);+#2984=EDGE_CURVE('',#2980,#2985,#2987,.T.);+#2985=VERTEX_POINT('',#2986);+#2986=CARTESIAN_POINT('',(-3.5,-2.615,0.65));+#2987=LINE('',#2981,#238);+#2988=ORIENTED_EDGE('',*,*,#2989,.T.);+#2989=EDGE_CURVE('',#2985,#883,#2987,.T.);+#2990=ORIENTED_EDGE('',*,*,#882,.F.);+#2991=ORIENTED_EDGE('',*,*,#2944,.F.);+#2992=PLANE('',#2993);+#2993=AXIS2_PLACEMENT_3D('',#2946,#273,#239);+#2994=ADVANCED_FACE('',(#2995),#244,.F.);+#2995=FACE_BOUND('',#2996,.F.);+#2996=EDGE_LOOP('',(#2997,#3001,#3005,#3006));+#2997=ORIENTED_EDGE('',*,*,#2998,.T.);+#2998=EDGE_CURVE('',#2985,#2999,#242,.T.);+#2999=VERTEX_POINT('',#3000);+#3000=CARTESIAN_POINT('',(-3.5,-2.185,0.65));+#3001=ORIENTED_EDGE('',*,*,#3002,.T.);+#3002=EDGE_CURVE('',#2999,#887,#3003,.T.);+#3003=LINE('',#3004,#238);+#3004=CARTESIAN_POINT('',(-3.7,-2.185,0.65));+#3005=ORIENTED_EDGE('',*,*,#886,.F.);+#3006=ORIENTED_EDGE('',*,*,#2989,.F.);+#3007=ADVANCED_FACE('',(#3008),#3027,.F.);+#3008=FACE_BOUND('',#3009,.F.);+#3009=EDGE_LOOP('',(#3010,#3013,#3018,#3023,#3025,#3026));+#3010=ORIENTED_EDGE('',*,*,#3011,.F.);+#3011=EDGE_CURVE('',#3012,#2999,#3003,.T.);+#3012=VERTEX_POINT('',#3004);+#3013=ORIENTED_EDGE('',*,*,#3014,.T.);+#3014=EDGE_CURVE('',#3012,#3015,#3017,.T.);+#3015=VERTEX_POINT('',#3016);+#3016=CARTESIAN_POINT('',(-3.7,-1.815,0.65));+#3017=LINE('',#3004,#845);+#3018=ORIENTED_EDGE('',*,*,#3019,.T.);+#3019=EDGE_CURVE('',#3015,#3020,#3022,.T.);+#3020=VERTEX_POINT('',#3021);+#3021=CARTESIAN_POINT('',(-3.5,-1.815,0.65));+#3022=LINE('',#3016,#238);+#3023=ORIENTED_EDGE('',*,*,#3024,.T.);+#3024=EDGE_CURVE('',#3020,#891,#3022,.T.);+#3025=ORIENTED_EDGE('',*,*,#890,.F.);+#3026=ORIENTED_EDGE('',*,*,#3002,.F.);+#3027=PLANE('',#3028);+#3028=AXIS2_PLACEMENT_3D('',#3004,#273,#239);+#3029=ADVANCED_FACE('',(#3030),#244,.F.);+#3030=FACE_BOUND('',#3031,.F.);+#3031=EDGE_LOOP('',(#3032,#3036,#3040,#3041));+#3032=ORIENTED_EDGE('',*,*,#3033,.T.);+#3033=EDGE_CURVE('',#3020,#3034,#242,.T.);+#3034=VERTEX_POINT('',#3035);+#3035=CARTESIAN_POINT('',(-3.5,-1.385,0.65));+#3036=ORIENTED_EDGE('',*,*,#3037,.T.);+#3037=EDGE_CURVE('',#3034,#895,#3038,.T.);+#3038=LINE('',#3039,#238);+#3039=CARTESIAN_POINT('',(-3.7,-1.385,0.65));+#3040=ORIENTED_EDGE('',*,*,#894,.F.);+#3041=ORIENTED_EDGE('',*,*,#3024,.F.);+#3042=ADVANCED_FACE('',(#3043),#3062,.F.);+#3043=FACE_BOUND('',#3044,.F.);+#3044=EDGE_LOOP('',(#3045,#3048,#3053,#3058,#3060,#3061));+#3045=ORIENTED_EDGE('',*,*,#3046,.F.);+#3046=EDGE_CURVE('',#3047,#3034,#3038,.T.);+#3047=VERTEX_POINT('',#3039);+#3048=ORIENTED_EDGE('',*,*,#3049,.T.);+#3049=EDGE_CURVE('',#3047,#3050,#3052,.T.);+#3050=VERTEX_POINT('',#3051);+#3051=CARTESIAN_POINT('',(-3.7,-1.015,0.65));+#3052=LINE('',#3039,#845);+#3053=ORIENTED_EDGE('',*,*,#3054,.T.);+#3054=EDGE_CURVE('',#3050,#3055,#3057,.T.);+#3055=VERTEX_POINT('',#3056);+#3056=CARTESIAN_POINT('',(-3.5,-1.015,0.65));+#3057=LINE('',#3051,#238);+#3058=ORIENTED_EDGE('',*,*,#3059,.T.);+#3059=EDGE_CURVE('',#3055,#899,#3057,.T.);+#3060=ORIENTED_EDGE('',*,*,#898,.F.);+#3061=ORIENTED_EDGE('',*,*,#3037,.F.);+#3062=PLANE('',#3063);+#3063=AXIS2_PLACEMENT_3D('',#3039,#273,#239);+#3064=ADVANCED_FACE('',(#3065),#244,.F.);+#3065=FACE_BOUND('',#3066,.F.);+#3066=EDGE_LOOP('',(#3067,#3071,#3075,#3076));+#3067=ORIENTED_EDGE('',*,*,#3068,.T.);+#3068=EDGE_CURVE('',#3055,#3069,#242,.T.);+#3069=VERTEX_POINT('',#3070);+#3070=CARTESIAN_POINT('',(-3.5,-0.585,0.65));+#3071=ORIENTED_EDGE('',*,*,#3072,.T.);+#3072=EDGE_CURVE('',#3069,#903,#3073,.T.);+#3073=LINE('',#3074,#238);+#3074=CARTESIAN_POINT('',(-3.7,-0.585,0.65));+#3075=ORIENTED_EDGE('',*,*,#902,.F.);+#3076=ORIENTED_EDGE('',*,*,#3059,.F.);+#3077=ADVANCED_FACE('',(#3078),#3097,.F.);+#3078=FACE_BOUND('',#3079,.F.);+#3079=EDGE_LOOP('',(#3080,#3083,#3088,#3093,#3095,#3096));+#3080=ORIENTED_EDGE('',*,*,#3081,.F.);+#3081=EDGE_CURVE('',#3082,#3069,#3073,.T.);+#3082=VERTEX_POINT('',#3074);+#3083=ORIENTED_EDGE('',*,*,#3084,.T.);+#3084=EDGE_CURVE('',#3082,#3085,#3087,.T.);+#3085=VERTEX_POINT('',#3086);+#3086=CARTESIAN_POINT('',(-3.7,-0.215,0.65));+#3087=LINE('',#3074,#845);+#3088=ORIENTED_EDGE('',*,*,#3089,.T.);+#3089=EDGE_CURVE('',#3085,#3090,#3092,.T.);+#3090=VERTEX_POINT('',#3091);+#3091=CARTESIAN_POINT('',(-3.5,-0.215,0.65));+#3092=LINE('',#3086,#238);+#3093=ORIENTED_EDGE('',*,*,#3094,.T.);+#3094=EDGE_CURVE('',#3090,#907,#3092,.T.);+#3095=ORIENTED_EDGE('',*,*,#906,.F.);+#3096=ORIENTED_EDGE('',*,*,#3072,.F.);+#3097=PLANE('',#3098);+#3098=AXIS2_PLACEMENT_3D('',#3074,#273,#239);+#3099=ADVANCED_FACE('',(#3100),#244,.F.);+#3100=FACE_BOUND('',#3101,.F.);+#3101=EDGE_LOOP('',(#3102,#3106,#3110,#3111));+#3102=ORIENTED_EDGE('',*,*,#3103,.T.);+#3103=EDGE_CURVE('',#3090,#3104,#242,.T.);+#3104=VERTEX_POINT('',#3105);+#3105=CARTESIAN_POINT('',(-3.5,0.215,0.65));+#3106=ORIENTED_EDGE('',*,*,#3107,.T.);+#3107=EDGE_CURVE('',#3104,#911,#3108,.T.);+#3108=LINE('',#3109,#238);+#3109=CARTESIAN_POINT('',(-3.7,0.215,0.65));+#3110=ORIENTED_EDGE('',*,*,#910,.F.);+#3111=ORIENTED_EDGE('',*,*,#3094,.F.);+#3112=ADVANCED_FACE('',(#3113),#3132,.F.);+#3113=FACE_BOUND('',#3114,.F.);+#3114=EDGE_LOOP('',(#3115,#3118,#3123,#3128,#3130,#3131));+#3115=ORIENTED_EDGE('',*,*,#3116,.F.);+#3116=EDGE_CURVE('',#3117,#3104,#3108,.T.);+#3117=VERTEX_POINT('',#3109);+#3118=ORIENTED_EDGE('',*,*,#3119,.T.);+#3119=EDGE_CURVE('',#3117,#3120,#3122,.T.);+#3120=VERTEX_POINT('',#3121);+#3121=CARTESIAN_POINT('',(-3.7,0.585,0.65));+#3122=LINE('',#3109,#845);+#3123=ORIENTED_EDGE('',*,*,#3124,.T.);+#3124=EDGE_CURVE('',#3120,#3125,#3127,.T.);+#3125=VERTEX_POINT('',#3126);+#3126=CARTESIAN_POINT('',(-3.5,0.585,0.65));+#3127=LINE('',#3121,#238);+#3128=ORIENTED_EDGE('',*,*,#3129,.T.);+#3129=EDGE_CURVE('',#3125,#915,#3127,.T.);+#3130=ORIENTED_EDGE('',*,*,#914,.F.);+#3131=ORIENTED_EDGE('',*,*,#3107,.F.);+#3132=PLANE('',#3133);+#3133=AXIS2_PLACEMENT_3D('',#3109,#273,#239);+#3134=ADVANCED_FACE('',(#3135),#244,.F.);+#3135=FACE_BOUND('',#3136,.F.);+#3136=EDGE_LOOP('',(#3137,#3141,#3145,#3146));+#3137=ORIENTED_EDGE('',*,*,#3138,.T.);+#3138=EDGE_CURVE('',#3125,#3139,#242,.T.);+#3139=VERTEX_POINT('',#3140);+#3140=CARTESIAN_POINT('',(-3.5,1.015,0.65));+#3141=ORIENTED_EDGE('',*,*,#3142,.T.);+#3142=EDGE_CURVE('',#3139,#919,#3143,.T.);+#3143=LINE('',#3144,#238);+#3144=CARTESIAN_POINT('',(-3.7,1.015,0.65));+#3145=ORIENTED_EDGE('',*,*,#918,.F.);+#3146=ORIENTED_EDGE('',*,*,#3129,.F.);+#3147=ADVANCED_FACE('',(#3148),#3167,.F.);+#3148=FACE_BOUND('',#3149,.F.);+#3149=EDGE_LOOP('',(#3150,#3153,#3158,#3163,#3165,#3166));+#3150=ORIENTED_EDGE('',*,*,#3151,.F.);+#3151=EDGE_CURVE('',#3152,#3139,#3143,.T.);+#3152=VERTEX_POINT('',#3144);+#3153=ORIENTED_EDGE('',*,*,#3154,.T.);+#3154=EDGE_CURVE('',#3152,#3155,#3157,.T.);+#3155=VERTEX_POINT('',#3156);+#3156=CARTESIAN_POINT('',(-3.7,1.385,0.65));+#3157=LINE('',#3144,#845);+#3158=ORIENTED_EDGE('',*,*,#3159,.T.);+#3159=EDGE_CURVE('',#3155,#3160,#3162,.T.);+#3160=VERTEX_POINT('',#3161);+#3161=CARTESIAN_POINT('',(-3.5,1.385,0.65));+#3162=LINE('',#3156,#238);+#3163=ORIENTED_EDGE('',*,*,#3164,.T.);+#3164=EDGE_CURVE('',#3160,#923,#3162,.T.);+#3165=ORIENTED_EDGE('',*,*,#922,.F.);+#3166=ORIENTED_EDGE('',*,*,#3142,.F.);+#3167=PLANE('',#3168);+#3168=AXIS2_PLACEMENT_3D('',#3144,#273,#239);+#3169=ADVANCED_FACE('',(#3170),#244,.F.);+#3170=FACE_BOUND('',#3171,.F.);+#3171=EDGE_LOOP('',(#3172,#3176,#3180,#3181));+#3172=ORIENTED_EDGE('',*,*,#3173,.T.);+#3173=EDGE_CURVE('',#3160,#3174,#242,.T.);+#3174=VERTEX_POINT('',#3175);+#3175=CARTESIAN_POINT('',(-3.5,1.815,0.65));+#3176=ORIENTED_EDGE('',*,*,#3177,.T.);+#3177=EDGE_CURVE('',#3174,#927,#3178,.T.);+#3178=LINE('',#3179,#238);+#3179=CARTESIAN_POINT('',(-3.7,1.815,0.65));+#3180=ORIENTED_EDGE('',*,*,#926,.F.);+#3181=ORIENTED_EDGE('',*,*,#3164,.F.);+#3182=ADVANCED_FACE('',(#3183),#3197,.F.);+#3183=FACE_BOUND('',#3184,.F.);+#3184=EDGE_LOOP('',(#3185,#3188,#3192,#3194,#3195,#3196));+#3185=ORIENTED_EDGE('',*,*,#3186,.F.);+#3186=EDGE_CURVE('',#3187,#3174,#3178,.T.);+#3187=VERTEX_POINT('',#3179);+#3188=ORIENTED_EDGE('',*,*,#3189,.T.);+#3189=EDGE_CURVE('',#3187,#3190,#3191,.T.);+#3190=VERTEX_POINT('',#2923);+#3191=LINE('',#3179,#845);+#3192=ORIENTED_EDGE('',*,*,#3193,.T.);+#3193=EDGE_CURVE('',#3190,#2916,#2922,.T.);+#3194=ORIENTED_EDGE('',*,*,#2921,.T.);+#3195=ORIENTED_EDGE('',*,*,#930,.F.);+#3196=ORIENTED_EDGE('',*,*,#3177,.F.);+#3197=PLANE('',#3198);+#3198=AXIS2_PLACEMENT_3D('',#3179,#273,#239);+#3199=ADVANCED_FACE('',(#3200),#3208,.F.);+#3200=FACE_BOUND('',#3201,.F.);+#3201=EDGE_LOOP('',(#3202,#2612,#3203,#3207));+#3202=ORIENTED_EDGE('',*,*,#873,.T.);+#3203=ORIENTED_EDGE('',*,*,#3204,.F.);+#3204=EDGE_CURVE('',#2950,#2594,#3205,.T.);+#3205=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2951,#3206),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3206=CARTESIAN_POINT('',(-3.239674773624,-3.329349547248,1.1));+#3207=ORIENTED_EDGE('',*,*,#2949,.T.);+#3208=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2951,#3206),(#229,#876)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3209=ADVANCED_FACE('',(#3210),#3246,.F.);+#3210=FACE_BOUND('',#3211,.F.);+#3211=EDGE_LOOP('',(#3212,#3217,#3220,#3221,#3223,#3224,#3226,#3227,#3229,#3230,#3232,#3233,#3235,#3236,#3238,#3239,#3241,#3242,#3244,#3245));+#3212=ORIENTED_EDGE('',*,*,#3213,.T.);+#3213=EDGE_CURVE('',#2682,#3214,#3216,.T.);+#3214=VERTEX_POINT('',#3215);+#3215=CARTESIAN_POINT('',(3.277174773624,3.404349547248,0.1));+#3216=LINE('',#2683,#49);+#3217=ORIENTED_EDGE('',*,*,#3218,.T.);+#3218=EDGE_CURVE('',#3214,#2217,#3219,.T.);+#3219=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3215,#2218),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3220=ORIENTED_EDGE('',*,*,#2232,.F.);+#3221=ORIENTED_EDGE('',*,*,#3222,.F.);+#3222=EDGE_CURVE('',#2023,#2098,#946,.T.);+#3223=ORIENTED_EDGE('',*,*,#2022,.F.);+#3224=ORIENTED_EDGE('',*,*,#3225,.F.);+#3225=EDGE_CURVE('',#1871,#1946,#946,.T.);+#3226=ORIENTED_EDGE('',*,*,#1870,.F.);+#3227=ORIENTED_EDGE('',*,*,#3228,.F.);+#3228=EDGE_CURVE('',#1719,#1794,#946,.T.);+#3229=ORIENTED_EDGE('',*,*,#1718,.F.);+#3230=ORIENTED_EDGE('',*,*,#3231,.F.);+#3231=EDGE_CURVE('',#1567,#1642,#946,.T.);+#3232=ORIENTED_EDGE('',*,*,#1566,.F.);+#3233=ORIENTED_EDGE('',*,*,#3234,.F.);+#3234=EDGE_CURVE('',#1415,#1490,#946,.T.);+#3235=ORIENTED_EDGE('',*,*,#1414,.F.);+#3236=ORIENTED_EDGE('',*,*,#3237,.F.);+#3237=EDGE_CURVE('',#1263,#1338,#946,.T.);+#3238=ORIENTED_EDGE('',*,*,#1262,.F.);+#3239=ORIENTED_EDGE('',*,*,#3240,.F.);+#3240=EDGE_CURVE('',#1111,#1186,#946,.T.);+#3241=ORIENTED_EDGE('',*,*,#1110,.F.);+#3242=ORIENTED_EDGE('',*,*,#3243,.F.);+#3243=EDGE_CURVE('',#944,#1034,#946,.T.);+#3244=ORIENTED_EDGE('',*,*,#943,.F.);+#3245=ORIENTED_EDGE('',*,*,#2686,.F.);+#3246=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2683,#802),(#3215,#2218)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3247=ADVANCED_FACE('',(#3248),#3255,.F.);+#3248=FACE_BOUND('',#3249,.F.);+#3249=EDGE_LOOP('',(#3250,#1084,#3253,#3254));+#3250=ORIENTED_EDGE('',*,*,#3251,.T.);+#3251=EDGE_CURVE('',#1007,#1080,#3252,.T.);+#3252=LINE('',#1008,#260);+#3253=ORIENTED_EDGE('',*,*,#1100,.F.);+#3254=ORIENTED_EDGE('',*,*,#1014,.F.);+#3255=PLANE('',#3256);+#3256=AXIS2_PLACEMENT_3D('',#1008,#3257,#1019);+#3257=DIRECTION('',(0.,-0.987285005229,-0.158960115908));+#3258=ADVANCED_FACE('',(#3259),#3266,.F.);+#3259=FACE_BOUND('',#3260,.F.);+#3260=EDGE_LOOP('',(#3261,#1078,#3264,#3265));+#3261=ORIENTED_EDGE('',*,*,#3262,.T.);+#3262=EDGE_CURVE('',#1002,#1075,#3263,.T.);+#3263=LINE('',#1003,#260);+#3264=ORIENTED_EDGE('',*,*,#3251,.F.);+#3265=ORIENTED_EDGE('',*,*,#1006,.F.);+#3266=CYLINDRICAL_SURFACE('',#3267,1.E-01);+#3267=AXIS2_PLACEMENT_3D('',#988,#973,#1012);+#3268=ADVANCED_FACE('',(#3269),#3276,.F.);+#3269=FACE_BOUND('',#3270,.F.);+#3270=EDGE_LOOP('',(#3271,#1073,#3274,#3275));+#3271=ORIENTED_EDGE('',*,*,#3272,.T.);+#3272=EDGE_CURVE('',#997,#1070,#3273,.T.);+#3273=LINE('',#998,#260);+#3274=ORIENTED_EDGE('',*,*,#3262,.F.);+#3275=ORIENTED_EDGE('',*,*,#1001,.F.);+#3276=PLANE('',#3277);+#3277=AXIS2_PLACEMENT_3D('',#998,#273,#217);+#3278=ADVANCED_FACE('',(#3279),#3286,.F.);+#3279=FACE_BOUND('',#3280,.F.);+#3280=EDGE_LOOP('',(#3281,#1068,#3284,#3285));+#3281=ORIENTED_EDGE('',*,*,#3282,.T.);+#3282=EDGE_CURVE('',#992,#1065,#3283,.T.);+#3283=LINE('',#993,#260);+#3284=ORIENTED_EDGE('',*,*,#3272,.F.);+#3285=ORIENTED_EDGE('',*,*,#996,.F.);+#3286=PLANE('',#3287);+#3287=AXIS2_PLACEMENT_3D('',#993,#217,#13);+#3288=ADVANCED_FACE('',(#3289),#3296,.F.);+#3289=FACE_BOUND('',#3290,.F.);+#3290=EDGE_LOOP('',(#3291,#1063,#3294,#3295));+#3291=ORIENTED_EDGE('',*,*,#3292,.T.);+#3292=EDGE_CURVE('',#984,#1058,#3293,.T.);+#3293=LINE('',#985,#260);+#3294=ORIENTED_EDGE('',*,*,#3282,.F.);+#3295=ORIENTED_EDGE('',*,*,#991,.F.);+#3296=PLANE('',#3297);+#3297=AXIS2_PLACEMENT_3D('',#985,#13,#965);+#3298=ADVANCED_FACE('',(#3299),#3306,.T.);+#3299=FACE_BOUND('',#3300,.F.);+#3300=EDGE_LOOP('',(#3301,#1056,#3304,#3305));+#3301=ORIENTED_EDGE('',*,*,#3302,.T.);+#3302=EDGE_CURVE('',#977,#1053,#3303,.T.);+#3303=LINE('',#978,#260);+#3304=ORIENTED_EDGE('',*,*,#3292,.F.);+#3305=ORIENTED_EDGE('',*,*,#983,.F.);+#3306=CYLINDRICAL_SURFACE('',#3307,0.2);+#3307=AXIS2_PLACEMENT_3D('',#988,#973,#989);+#3308=ADVANCED_FACE('',(#3309),#3316,.F.);+#3309=FACE_BOUND('',#3310,.F.);+#3310=EDGE_LOOP('',(#3311,#1051,#3314,#3315));+#3311=ORIENTED_EDGE('',*,*,#3312,.T.);+#3312=EDGE_CURVE('',#968,#1046,#3313,.T.);+#3313=LINE('',#969,#260);+#3314=ORIENTED_EDGE('',*,*,#3302,.F.);+#3315=ORIENTED_EDGE('',*,*,#976,.F.);+#3316=PLANE('',#3317);+#3317=AXIS2_PLACEMENT_3D('',#969,#3318,#981);+#3318=DIRECTION('',(0.,0.987285005229,0.158960115908));+#3319=ADVANCED_FACE('',(#3320),#3327,.F.);+#3320=FACE_BOUND('',#3321,.F.);+#3321=EDGE_LOOP('',(#3322,#1044,#3325,#3326));+#3322=ORIENTED_EDGE('',*,*,#3323,.T.);+#3323=EDGE_CURVE('',#960,#1040,#3324,.T.);+#3324=LINE('',#961,#260);+#3325=ORIENTED_EDGE('',*,*,#3312,.F.);+#3326=ORIENTED_EDGE('',*,*,#967,.F.);+#3327=CYLINDRICAL_SURFACE('',#971,0.1);+#3328=ADVANCED_FACE('',(#3329),#3334,.F.);+#3329=FACE_BOUND('',#3330,.F.);+#3330=EDGE_LOOP('',(#3331,#3332,#1038,#3333));+#3331=ORIENTED_EDGE('',*,*,#959,.F.);+#3332=ORIENTED_EDGE('',*,*,#3243,.T.);+#3333=ORIENTED_EDGE('',*,*,#3323,.F.);+#3334=PLANE('',#3335);+#3335=AXIS2_PLACEMENT_3D('',#963,#13,#965);+#3336=ADVANCED_FACE('',(#3337),#3344,.F.);+#3337=FACE_BOUND('',#3338,.F.);+#3338=EDGE_LOOP('',(#3339,#1236,#3342,#3343));+#3339=ORIENTED_EDGE('',*,*,#3340,.T.);+#3340=EDGE_CURVE('',#1164,#1232,#3341,.T.);+#3341=LINE('',#1165,#260);+#3342=ORIENTED_EDGE('',*,*,#1252,.F.);+#3343=ORIENTED_EDGE('',*,*,#1169,.F.);+#3344=PLANE('',#3345);+#3345=AXIS2_PLACEMENT_3D('',#1165,#3257,#1019);+#3346=ADVANCED_FACE('',(#3347),#3354,.F.);+#3347=FACE_BOUND('',#3348,.F.);+#3348=EDGE_LOOP('',(#3349,#1230,#3352,#3353));+#3349=ORIENTED_EDGE('',*,*,#3350,.T.);+#3350=EDGE_CURVE('',#1159,#1227,#3351,.T.);+#3351=LINE('',#1160,#260);+#3352=ORIENTED_EDGE('',*,*,#3340,.F.);+#3353=ORIENTED_EDGE('',*,*,#1163,.F.);+#3354=CYLINDRICAL_SURFACE('',#3355,1.E-01);+#3355=AXIS2_PLACEMENT_3D('',#1146,#973,#1012);+#3356=ADVANCED_FACE('',(#3357),#3364,.F.);+#3357=FACE_BOUND('',#3358,.F.);+#3358=EDGE_LOOP('',(#3359,#1225,#3362,#3363));+#3359=ORIENTED_EDGE('',*,*,#3360,.T.);+#3360=EDGE_CURVE('',#1154,#1222,#3361,.T.);+#3361=LINE('',#1155,#260);+#3362=ORIENTED_EDGE('',*,*,#3350,.F.);+#3363=ORIENTED_EDGE('',*,*,#1158,.F.);+#3364=PLANE('',#3365);+#3365=AXIS2_PLACEMENT_3D('',#1155,#273,#217);+#3366=ADVANCED_FACE('',(#3367),#3374,.F.);+#3367=FACE_BOUND('',#3368,.F.);+#3368=EDGE_LOOP('',(#3369,#1220,#3372,#3373));+#3369=ORIENTED_EDGE('',*,*,#3370,.T.);+#3370=EDGE_CURVE('',#1149,#1217,#3371,.T.);+#3371=LINE('',#1150,#260);+#3372=ORIENTED_EDGE('',*,*,#3360,.F.);+#3373=ORIENTED_EDGE('',*,*,#1153,.F.);+#3374=PLANE('',#3375);+#3375=AXIS2_PLACEMENT_3D('',#1150,#217,#13);+#3376=ADVANCED_FACE('',(#3377),#3384,.F.);+#3377=FACE_BOUND('',#3378,.F.);+#3378=EDGE_LOOP('',(#3379,#1215,#3382,#3383));+#3379=ORIENTED_EDGE('',*,*,#3380,.T.);+#3380=EDGE_CURVE('',#1142,#1210,#3381,.T.);+#3381=LINE('',#1143,#260);+#3382=ORIENTED_EDGE('',*,*,#3370,.F.);+#3383=ORIENTED_EDGE('',*,*,#1148,.F.);+#3384=PLANE('',#3385);+#3385=AXIS2_PLACEMENT_3D('',#1143,#13,#965);+#3386=ADVANCED_FACE('',(#3387),#3394,.T.);+#3387=FACE_BOUND('',#3388,.F.);+#3388=EDGE_LOOP('',(#3389,#1208,#3392,#3393));+#3389=ORIENTED_EDGE('',*,*,#3390,.T.);+#3390=EDGE_CURVE('',#1137,#1205,#3391,.T.);+#3391=LINE('',#1138,#260);+#3392=ORIENTED_EDGE('',*,*,#3380,.F.);+#3393=ORIENTED_EDGE('',*,*,#1141,.F.);+#3394=CYLINDRICAL_SURFACE('',#3395,0.2);+#3395=AXIS2_PLACEMENT_3D('',#1146,#973,#989);+#3396=ADVANCED_FACE('',(#3397),#3404,.F.);+#3397=FACE_BOUND('',#3398,.F.);+#3398=EDGE_LOOP('',(#3399,#1203,#3402,#3403));+#3399=ORIENTED_EDGE('',*,*,#3400,.T.);+#3400=EDGE_CURVE('',#1130,#1198,#3401,.T.);+#3401=LINE('',#1131,#260);+#3402=ORIENTED_EDGE('',*,*,#3390,.F.);+#3403=ORIENTED_EDGE('',*,*,#1136,.F.);+#3404=PLANE('',#3405);+#3405=AXIS2_PLACEMENT_3D('',#1131,#3318,#981);+#3406=ADVANCED_FACE('',(#3407),#3414,.F.);+#3407=FACE_BOUND('',#3408,.F.);+#3408=EDGE_LOOP('',(#3409,#1196,#3412,#3413));+#3409=ORIENTED_EDGE('',*,*,#3410,.T.);+#3410=EDGE_CURVE('',#1124,#1192,#3411,.T.);+#3411=LINE('',#1125,#260);+#3412=ORIENTED_EDGE('',*,*,#3400,.F.);+#3413=ORIENTED_EDGE('',*,*,#1129,.F.);+#3414=CYLINDRICAL_SURFACE('',#1133,0.1);+#3415=ADVANCED_FACE('',(#3416),#3421,.F.);+#3416=FACE_BOUND('',#3417,.F.);+#3417=EDGE_LOOP('',(#3418,#3419,#1190,#3420));+#3418=ORIENTED_EDGE('',*,*,#1123,.F.);+#3419=ORIENTED_EDGE('',*,*,#3240,.T.);+#3420=ORIENTED_EDGE('',*,*,#3410,.F.);+#3421=PLANE('',#3422);+#3422=AXIS2_PLACEMENT_3D('',#1127,#13,#965);+#3423=ADVANCED_FACE('',(#3424),#3431,.F.);+#3424=FACE_BOUND('',#3425,.F.);+#3425=EDGE_LOOP('',(#3426,#1388,#3429,#3430));+#3426=ORIENTED_EDGE('',*,*,#3427,.T.);+#3427=EDGE_CURVE('',#1316,#1384,#3428,.T.);+#3428=LINE('',#1317,#260);+#3429=ORIENTED_EDGE('',*,*,#1404,.F.);+#3430=ORIENTED_EDGE('',*,*,#1321,.F.);+#3431=PLANE('',#3432);+#3432=AXIS2_PLACEMENT_3D('',#1317,#3257,#1019);+#3433=ADVANCED_FACE('',(#3434),#3441,.F.);+#3434=FACE_BOUND('',#3435,.F.);+#3435=EDGE_LOOP('',(#3436,#1382,#3439,#3440));+#3436=ORIENTED_EDGE('',*,*,#3437,.T.);+#3437=EDGE_CURVE('',#1311,#1379,#3438,.T.);+#3438=LINE('',#1312,#260);+#3439=ORIENTED_EDGE('',*,*,#3427,.F.);+#3440=ORIENTED_EDGE('',*,*,#1315,.F.);+#3441=CYLINDRICAL_SURFACE('',#3442,1.E-01);+#3442=AXIS2_PLACEMENT_3D('',#1298,#973,#1012);+#3443=ADVANCED_FACE('',(#3444),#3451,.F.);+#3444=FACE_BOUND('',#3445,.F.);+#3445=EDGE_LOOP('',(#3446,#1377,#3449,#3450));+#3446=ORIENTED_EDGE('',*,*,#3447,.T.);+#3447=EDGE_CURVE('',#1306,#1374,#3448,.T.);+#3448=LINE('',#1307,#260);+#3449=ORIENTED_EDGE('',*,*,#3437,.F.);+#3450=ORIENTED_EDGE('',*,*,#1310,.F.);+#3451=PLANE('',#3452);+#3452=AXIS2_PLACEMENT_3D('',#1307,#273,#217);+#3453=ADVANCED_FACE('',(#3454),#3461,.F.);+#3454=FACE_BOUND('',#3455,.F.);+#3455=EDGE_LOOP('',(#3456,#1372,#3459,#3460));+#3456=ORIENTED_EDGE('',*,*,#3457,.T.);+#3457=EDGE_CURVE('',#1301,#1369,#3458,.T.);+#3458=LINE('',#1302,#260);+#3459=ORIENTED_EDGE('',*,*,#3447,.F.);+#3460=ORIENTED_EDGE('',*,*,#1305,.F.);+#3461=PLANE('',#3462);+#3462=AXIS2_PLACEMENT_3D('',#1302,#217,#13);+#3463=ADVANCED_FACE('',(#3464),#3471,.F.);+#3464=FACE_BOUND('',#3465,.F.);+#3465=EDGE_LOOP('',(#3466,#1367,#3469,#3470));+#3466=ORIENTED_EDGE('',*,*,#3467,.T.);+#3467=EDGE_CURVE('',#1294,#1362,#3468,.T.);+#3468=LINE('',#1295,#260);+#3469=ORIENTED_EDGE('',*,*,#3457,.F.);+#3470=ORIENTED_EDGE('',*,*,#1300,.F.);+#3471=PLANE('',#3472);+#3472=AXIS2_PLACEMENT_3D('',#1295,#13,#965);+#3473=ADVANCED_FACE('',(#3474),#3481,.T.);+#3474=FACE_BOUND('',#3475,.F.);+#3475=EDGE_LOOP('',(#3476,#1360,#3479,#3480));+#3476=ORIENTED_EDGE('',*,*,#3477,.T.);+#3477=EDGE_CURVE('',#1289,#1357,#3478,.T.);+#3478=LINE('',#1290,#260);+#3479=ORIENTED_EDGE('',*,*,#3467,.F.);+#3480=ORIENTED_EDGE('',*,*,#1293,.F.);+#3481=CYLINDRICAL_SURFACE('',#3482,0.2);+#3482=AXIS2_PLACEMENT_3D('',#1298,#973,#989);+#3483=ADVANCED_FACE('',(#3484),#3491,.F.);+#3484=FACE_BOUND('',#3485,.F.);+#3485=EDGE_LOOP('',(#3486,#1355,#3489,#3490));+#3486=ORIENTED_EDGE('',*,*,#3487,.T.);+#3487=EDGE_CURVE('',#1282,#1350,#3488,.T.);+#3488=LINE('',#1283,#260);+#3489=ORIENTED_EDGE('',*,*,#3477,.F.);+#3490=ORIENTED_EDGE('',*,*,#1288,.F.);+#3491=PLANE('',#3492);+#3492=AXIS2_PLACEMENT_3D('',#1283,#3318,#981);+#3493=ADVANCED_FACE('',(#3494),#3501,.F.);+#3494=FACE_BOUND('',#3495,.F.);+#3495=EDGE_LOOP('',(#3496,#1348,#3499,#3500));+#3496=ORIENTED_EDGE('',*,*,#3497,.T.);+#3497=EDGE_CURVE('',#1276,#1344,#3498,.T.);+#3498=LINE('',#1277,#260);+#3499=ORIENTED_EDGE('',*,*,#3487,.F.);+#3500=ORIENTED_EDGE('',*,*,#1281,.F.);+#3501=CYLINDRICAL_SURFACE('',#1285,0.1);+#3502=ADVANCED_FACE('',(#3503),#3508,.F.);+#3503=FACE_BOUND('',#3504,.F.);+#3504=EDGE_LOOP('',(#3505,#3506,#1342,#3507));+#3505=ORIENTED_EDGE('',*,*,#1275,.F.);+#3506=ORIENTED_EDGE('',*,*,#3237,.T.);+#3507=ORIENTED_EDGE('',*,*,#3497,.F.);+#3508=PLANE('',#3509);+#3509=AXIS2_PLACEMENT_3D('',#1279,#13,#965);+#3510=ADVANCED_FACE('',(#3511),#3518,.F.);+#3511=FACE_BOUND('',#3512,.F.);+#3512=EDGE_LOOP('',(#3513,#1540,#3516,#3517));+#3513=ORIENTED_EDGE('',*,*,#3514,.T.);+#3514=EDGE_CURVE('',#1468,#1536,#3515,.T.);+#3515=LINE('',#1469,#260);+#3516=ORIENTED_EDGE('',*,*,#1556,.F.);+#3517=ORIENTED_EDGE('',*,*,#1473,.F.);+#3518=PLANE('',#3519);+#3519=AXIS2_PLACEMENT_3D('',#1469,#3257,#1019);+#3520=ADVANCED_FACE('',(#3521),#3528,.F.);+#3521=FACE_BOUND('',#3522,.F.);+#3522=EDGE_LOOP('',(#3523,#1534,#3526,#3527));+#3523=ORIENTED_EDGE('',*,*,#3524,.T.);+#3524=EDGE_CURVE('',#1463,#1531,#3525,.T.);+#3525=LINE('',#1464,#260);+#3526=ORIENTED_EDGE('',*,*,#3514,.F.);+#3527=ORIENTED_EDGE('',*,*,#1467,.F.);+#3528=CYLINDRICAL_SURFACE('',#3529,1.E-01);+#3529=AXIS2_PLACEMENT_3D('',#1450,#973,#1012);+#3530=ADVANCED_FACE('',(#3531),#3538,.F.);+#3531=FACE_BOUND('',#3532,.F.);+#3532=EDGE_LOOP('',(#3533,#1529,#3536,#3537));+#3533=ORIENTED_EDGE('',*,*,#3534,.T.);+#3534=EDGE_CURVE('',#1458,#1526,#3535,.T.);+#3535=LINE('',#1459,#260);+#3536=ORIENTED_EDGE('',*,*,#3524,.F.);+#3537=ORIENTED_EDGE('',*,*,#1462,.F.);+#3538=PLANE('',#3539);+#3539=AXIS2_PLACEMENT_3D('',#1459,#273,#217);+#3540=ADVANCED_FACE('',(#3541),#3548,.F.);+#3541=FACE_BOUND('',#3542,.F.);+#3542=EDGE_LOOP('',(#3543,#1524,#3546,#3547));+#3543=ORIENTED_EDGE('',*,*,#3544,.T.);+#3544=EDGE_CURVE('',#1453,#1521,#3545,.T.);+#3545=LINE('',#1454,#260);+#3546=ORIENTED_EDGE('',*,*,#3534,.F.);+#3547=ORIENTED_EDGE('',*,*,#1457,.F.);+#3548=PLANE('',#3549);+#3549=AXIS2_PLACEMENT_3D('',#1454,#217,#13);+#3550=ADVANCED_FACE('',(#3551),#3558,.F.);+#3551=FACE_BOUND('',#3552,.F.);+#3552=EDGE_LOOP('',(#3553,#1519,#3556,#3557));+#3553=ORIENTED_EDGE('',*,*,#3554,.T.);+#3554=EDGE_CURVE('',#1446,#1514,#3555,.T.);+#3555=LINE('',#1447,#260);+#3556=ORIENTED_EDGE('',*,*,#3544,.F.);+#3557=ORIENTED_EDGE('',*,*,#1452,.F.);+#3558=PLANE('',#3559);+#3559=AXIS2_PLACEMENT_3D('',#1447,#13,#965);+#3560=ADVANCED_FACE('',(#3561),#3568,.T.);+#3561=FACE_BOUND('',#3562,.F.);+#3562=EDGE_LOOP('',(#3563,#1512,#3566,#3567));+#3563=ORIENTED_EDGE('',*,*,#3564,.T.);+#3564=EDGE_CURVE('',#1441,#1509,#3565,.T.);+#3565=LINE('',#1442,#260);+#3566=ORIENTED_EDGE('',*,*,#3554,.F.);+#3567=ORIENTED_EDGE('',*,*,#1445,.F.);+#3568=CYLINDRICAL_SURFACE('',#3569,0.2);+#3569=AXIS2_PLACEMENT_3D('',#1450,#973,#989);+#3570=ADVANCED_FACE('',(#3571),#3578,.F.);+#3571=FACE_BOUND('',#3572,.F.);+#3572=EDGE_LOOP('',(#3573,#1507,#3576,#3577));+#3573=ORIENTED_EDGE('',*,*,#3574,.T.);+#3574=EDGE_CURVE('',#1434,#1502,#3575,.T.);+#3575=LINE('',#1435,#260);+#3576=ORIENTED_EDGE('',*,*,#3564,.F.);+#3577=ORIENTED_EDGE('',*,*,#1440,.F.);+#3578=PLANE('',#3579);+#3579=AXIS2_PLACEMENT_3D('',#1435,#3318,#981);+#3580=ADVANCED_FACE('',(#3581),#3588,.F.);+#3581=FACE_BOUND('',#3582,.F.);+#3582=EDGE_LOOP('',(#3583,#1500,#3586,#3587));+#3583=ORIENTED_EDGE('',*,*,#3584,.T.);+#3584=EDGE_CURVE('',#1428,#1496,#3585,.T.);+#3585=LINE('',#1429,#260);+#3586=ORIENTED_EDGE('',*,*,#3574,.F.);+#3587=ORIENTED_EDGE('',*,*,#1433,.F.);+#3588=CYLINDRICAL_SURFACE('',#1437,0.1);+#3589=ADVANCED_FACE('',(#3590),#3595,.F.);+#3590=FACE_BOUND('',#3591,.F.);+#3591=EDGE_LOOP('',(#3592,#3593,#1494,#3594));+#3592=ORIENTED_EDGE('',*,*,#1427,.F.);+#3593=ORIENTED_EDGE('',*,*,#3234,.T.);+#3594=ORIENTED_EDGE('',*,*,#3584,.F.);+#3595=PLANE('',#3596);+#3596=AXIS2_PLACEMENT_3D('',#1431,#13,#965);+#3597=ADVANCED_FACE('',(#3598),#3605,.F.);+#3598=FACE_BOUND('',#3599,.F.);+#3599=EDGE_LOOP('',(#3600,#1692,#3603,#3604));+#3600=ORIENTED_EDGE('',*,*,#3601,.T.);+#3601=EDGE_CURVE('',#1620,#1688,#3602,.T.);+#3602=LINE('',#1621,#260);+#3603=ORIENTED_EDGE('',*,*,#1708,.F.);+#3604=ORIENTED_EDGE('',*,*,#1625,.F.);+#3605=PLANE('',#3606);+#3606=AXIS2_PLACEMENT_3D('',#1621,#3257,#1019);+#3607=ADVANCED_FACE('',(#3608),#3615,.F.);+#3608=FACE_BOUND('',#3609,.F.);+#3609=EDGE_LOOP('',(#3610,#1686,#3613,#3614));+#3610=ORIENTED_EDGE('',*,*,#3611,.T.);+#3611=EDGE_CURVE('',#1615,#1683,#3612,.T.);+#3612=LINE('',#1616,#260);+#3613=ORIENTED_EDGE('',*,*,#3601,.F.);+#3614=ORIENTED_EDGE('',*,*,#1619,.F.);+#3615=CYLINDRICAL_SURFACE('',#3616,1.E-01);+#3616=AXIS2_PLACEMENT_3D('',#1602,#973,#1012);+#3617=ADVANCED_FACE('',(#3618),#3625,.F.);+#3618=FACE_BOUND('',#3619,.F.);+#3619=EDGE_LOOP('',(#3620,#1681,#3623,#3624));+#3620=ORIENTED_EDGE('',*,*,#3621,.T.);+#3621=EDGE_CURVE('',#1610,#1678,#3622,.T.);+#3622=LINE('',#1611,#260);+#3623=ORIENTED_EDGE('',*,*,#3611,.F.);+#3624=ORIENTED_EDGE('',*,*,#1614,.F.);+#3625=PLANE('',#3626);+#3626=AXIS2_PLACEMENT_3D('',#1611,#273,#217);+#3627=ADVANCED_FACE('',(#3628),#3635,.F.);+#3628=FACE_BOUND('',#3629,.F.);+#3629=EDGE_LOOP('',(#3630,#1676,#3633,#3634));+#3630=ORIENTED_EDGE('',*,*,#3631,.T.);+#3631=EDGE_CURVE('',#1605,#1673,#3632,.T.);+#3632=LINE('',#1606,#260);+#3633=ORIENTED_EDGE('',*,*,#3621,.F.);+#3634=ORIENTED_EDGE('',*,*,#1609,.F.);+#3635=PLANE('',#3636);+#3636=AXIS2_PLACEMENT_3D('',#1606,#217,#13);+#3637=ADVANCED_FACE('',(#3638),#3645,.F.);+#3638=FACE_BOUND('',#3639,.F.);+#3639=EDGE_LOOP('',(#3640,#1671,#3643,#3644));+#3640=ORIENTED_EDGE('',*,*,#3641,.T.);+#3641=EDGE_CURVE('',#1598,#1666,#3642,.T.);+#3642=LINE('',#1599,#260);+#3643=ORIENTED_EDGE('',*,*,#3631,.F.);+#3644=ORIENTED_EDGE('',*,*,#1604,.F.);+#3645=PLANE('',#3646);+#3646=AXIS2_PLACEMENT_3D('',#1599,#13,#965);+#3647=ADVANCED_FACE('',(#3648),#3655,.T.);+#3648=FACE_BOUND('',#3649,.F.);+#3649=EDGE_LOOP('',(#3650,#1664,#3653,#3654));+#3650=ORIENTED_EDGE('',*,*,#3651,.T.);+#3651=EDGE_CURVE('',#1593,#1661,#3652,.T.);+#3652=LINE('',#1594,#260);+#3653=ORIENTED_EDGE('',*,*,#3641,.F.);+#3654=ORIENTED_EDGE('',*,*,#1597,.F.);+#3655=CYLINDRICAL_SURFACE('',#3656,0.2);+#3656=AXIS2_PLACEMENT_3D('',#1602,#973,#989);+#3657=ADVANCED_FACE('',(#3658),#3665,.F.);+#3658=FACE_BOUND('',#3659,.F.);+#3659=EDGE_LOOP('',(#3660,#1659,#3663,#3664));+#3660=ORIENTED_EDGE('',*,*,#3661,.T.);+#3661=EDGE_CURVE('',#1586,#1654,#3662,.T.);+#3662=LINE('',#1587,#260);+#3663=ORIENTED_EDGE('',*,*,#3651,.F.);+#3664=ORIENTED_EDGE('',*,*,#1592,.F.);+#3665=PLANE('',#3666);+#3666=AXIS2_PLACEMENT_3D('',#1587,#3318,#981);+#3667=ADVANCED_FACE('',(#3668),#3675,.F.);+#3668=FACE_BOUND('',#3669,.F.);+#3669=EDGE_LOOP('',(#3670,#1652,#3673,#3674));+#3670=ORIENTED_EDGE('',*,*,#3671,.T.);+#3671=EDGE_CURVE('',#1580,#1648,#3672,.T.);+#3672=LINE('',#1581,#260);+#3673=ORIENTED_EDGE('',*,*,#3661,.F.);+#3674=ORIENTED_EDGE('',*,*,#1585,.F.);+#3675=CYLINDRICAL_SURFACE('',#1589,0.1);+#3676=ADVANCED_FACE('',(#3677),#3682,.F.);+#3677=FACE_BOUND('',#3678,.F.);+#3678=EDGE_LOOP('',(#3679,#3680,#1646,#3681));+#3679=ORIENTED_EDGE('',*,*,#1579,.F.);+#3680=ORIENTED_EDGE('',*,*,#3231,.T.);+#3681=ORIENTED_EDGE('',*,*,#3671,.F.);+#3682=PLANE('',#3683);+#3683=AXIS2_PLACEMENT_3D('',#1583,#13,#965);+#3684=ADVANCED_FACE('',(#3685),#3692,.F.);+#3685=FACE_BOUND('',#3686,.F.);+#3686=EDGE_LOOP('',(#3687,#1844,#3690,#3691));+#3687=ORIENTED_EDGE('',*,*,#3688,.T.);+#3688=EDGE_CURVE('',#1772,#1840,#3689,.T.);+#3689=LINE('',#1773,#260);+#3690=ORIENTED_EDGE('',*,*,#1860,.F.);+#3691=ORIENTED_EDGE('',*,*,#1777,.F.);+#3692=PLANE('',#3693);+#3693=AXIS2_PLACEMENT_3D('',#1773,#3257,#1019);+#3694=ADVANCED_FACE('',(#3695),#3702,.F.);+#3695=FACE_BOUND('',#3696,.F.);+#3696=EDGE_LOOP('',(#3697,#1838,#3700,#3701));+#3697=ORIENTED_EDGE('',*,*,#3698,.T.);+#3698=EDGE_CURVE('',#1767,#1835,#3699,.T.);+#3699=LINE('',#1768,#260);+#3700=ORIENTED_EDGE('',*,*,#3688,.F.);+#3701=ORIENTED_EDGE('',*,*,#1771,.F.);+#3702=CYLINDRICAL_SURFACE('',#3703,1.E-01);+#3703=AXIS2_PLACEMENT_3D('',#1754,#973,#1012);+#3704=ADVANCED_FACE('',(#3705),#3712,.F.);+#3705=FACE_BOUND('',#3706,.F.);+#3706=EDGE_LOOP('',(#3707,#1833,#3710,#3711));+#3707=ORIENTED_EDGE('',*,*,#3708,.T.);+#3708=EDGE_CURVE('',#1762,#1830,#3709,.T.);+#3709=LINE('',#1763,#260);+#3710=ORIENTED_EDGE('',*,*,#3698,.F.);+#3711=ORIENTED_EDGE('',*,*,#1766,.F.);+#3712=PLANE('',#3713);+#3713=AXIS2_PLACEMENT_3D('',#1763,#273,#217);+#3714=ADVANCED_FACE('',(#3715),#3722,.F.);+#3715=FACE_BOUND('',#3716,.F.);+#3716=EDGE_LOOP('',(#3717,#1828,#3720,#3721));+#3717=ORIENTED_EDGE('',*,*,#3718,.T.);+#3718=EDGE_CURVE('',#1757,#1825,#3719,.T.);+#3719=LINE('',#1758,#260);+#3720=ORIENTED_EDGE('',*,*,#3708,.F.);+#3721=ORIENTED_EDGE('',*,*,#1761,.F.);+#3722=PLANE('',#3723);+#3723=AXIS2_PLACEMENT_3D('',#1758,#217,#13);+#3724=ADVANCED_FACE('',(#3725),#3732,.F.);+#3725=FACE_BOUND('',#3726,.F.);+#3726=EDGE_LOOP('',(#3727,#1823,#3730,#3731));+#3727=ORIENTED_EDGE('',*,*,#3728,.T.);+#3728=EDGE_CURVE('',#1750,#1818,#3729,.T.);+#3729=LINE('',#1751,#260);+#3730=ORIENTED_EDGE('',*,*,#3718,.F.);+#3731=ORIENTED_EDGE('',*,*,#1756,.F.);+#3732=PLANE('',#3733);+#3733=AXIS2_PLACEMENT_3D('',#1751,#13,#965);+#3734=ADVANCED_FACE('',(#3735),#3742,.T.);+#3735=FACE_BOUND('',#3736,.F.);+#3736=EDGE_LOOP('',(#3737,#1816,#3740,#3741));+#3737=ORIENTED_EDGE('',*,*,#3738,.T.);+#3738=EDGE_CURVE('',#1745,#1813,#3739,.T.);+#3739=LINE('',#1746,#260);+#3740=ORIENTED_EDGE('',*,*,#3728,.F.);+#3741=ORIENTED_EDGE('',*,*,#1749,.F.);+#3742=CYLINDRICAL_SURFACE('',#3743,0.2);+#3743=AXIS2_PLACEMENT_3D('',#1754,#973,#989);+#3744=ADVANCED_FACE('',(#3745),#3752,.F.);+#3745=FACE_BOUND('',#3746,.F.);+#3746=EDGE_LOOP('',(#3747,#1811,#3750,#3751));+#3747=ORIENTED_EDGE('',*,*,#3748,.T.);+#3748=EDGE_CURVE('',#1738,#1806,#3749,.T.);+#3749=LINE('',#1739,#260);+#3750=ORIENTED_EDGE('',*,*,#3738,.F.);+#3751=ORIENTED_EDGE('',*,*,#1744,.F.);+#3752=PLANE('',#3753);+#3753=AXIS2_PLACEMENT_3D('',#1739,#3318,#981);+#3754=ADVANCED_FACE('',(#3755),#3762,.F.);+#3755=FACE_BOUND('',#3756,.F.);+#3756=EDGE_LOOP('',(#3757,#1804,#3760,#3761));+#3757=ORIENTED_EDGE('',*,*,#3758,.T.);+#3758=EDGE_CURVE('',#1732,#1800,#3759,.T.);+#3759=LINE('',#1733,#260);+#3760=ORIENTED_EDGE('',*,*,#3748,.F.);+#3761=ORIENTED_EDGE('',*,*,#1737,.F.);+#3762=CYLINDRICAL_SURFACE('',#1741,0.1);+#3763=ADVANCED_FACE('',(#3764),#3769,.F.);+#3764=FACE_BOUND('',#3765,.F.);+#3765=EDGE_LOOP('',(#3766,#3767,#1798,#3768));+#3766=ORIENTED_EDGE('',*,*,#1731,.F.);+#3767=ORIENTED_EDGE('',*,*,#3228,.T.);+#3768=ORIENTED_EDGE('',*,*,#3758,.F.);+#3769=PLANE('',#3770);+#3770=AXIS2_PLACEMENT_3D('',#1735,#13,#965);+#3771=ADVANCED_FACE('',(#3772),#3779,.F.);+#3772=FACE_BOUND('',#3773,.F.);+#3773=EDGE_LOOP('',(#3774,#1996,#3777,#3778));+#3774=ORIENTED_EDGE('',*,*,#3775,.T.);+#3775=EDGE_CURVE('',#1924,#1992,#3776,.T.);+#3776=LINE('',#1925,#260);+#3777=ORIENTED_EDGE('',*,*,#2012,.F.);+#3778=ORIENTED_EDGE('',*,*,#1929,.F.);+#3779=PLANE('',#3780);+#3780=AXIS2_PLACEMENT_3D('',#1925,#3257,#1019);+#3781=ADVANCED_FACE('',(#3782),#3789,.F.);+#3782=FACE_BOUND('',#3783,.F.);+#3783=EDGE_LOOP('',(#3784,#1990,#3787,#3788));+#3784=ORIENTED_EDGE('',*,*,#3785,.T.);+#3785=EDGE_CURVE('',#1919,#1987,#3786,.T.);+#3786=LINE('',#1920,#260);+#3787=ORIENTED_EDGE('',*,*,#3775,.F.);+#3788=ORIENTED_EDGE('',*,*,#1923,.F.);+#3789=CYLINDRICAL_SURFACE('',#3790,1.E-01);+#3790=AXIS2_PLACEMENT_3D('',#1906,#973,#1012);+#3791=ADVANCED_FACE('',(#3792),#3799,.F.);+#3792=FACE_BOUND('',#3793,.F.);+#3793=EDGE_LOOP('',(#3794,#1985,#3797,#3798));+#3794=ORIENTED_EDGE('',*,*,#3795,.T.);+#3795=EDGE_CURVE('',#1914,#1982,#3796,.T.);+#3796=LINE('',#1915,#260);+#3797=ORIENTED_EDGE('',*,*,#3785,.F.);+#3798=ORIENTED_EDGE('',*,*,#1918,.F.);+#3799=PLANE('',#3800);+#3800=AXIS2_PLACEMENT_3D('',#1915,#273,#217);+#3801=ADVANCED_FACE('',(#3802),#3809,.F.);+#3802=FACE_BOUND('',#3803,.F.);+#3803=EDGE_LOOP('',(#3804,#1980,#3807,#3808));+#3804=ORIENTED_EDGE('',*,*,#3805,.T.);+#3805=EDGE_CURVE('',#1909,#1977,#3806,.T.);+#3806=LINE('',#1910,#260);+#3807=ORIENTED_EDGE('',*,*,#3795,.F.);+#3808=ORIENTED_EDGE('',*,*,#1913,.F.);+#3809=PLANE('',#3810);+#3810=AXIS2_PLACEMENT_3D('',#1910,#217,#13);+#3811=ADVANCED_FACE('',(#3812),#3819,.F.);+#3812=FACE_BOUND('',#3813,.F.);+#3813=EDGE_LOOP('',(#3814,#1975,#3817,#3818));+#3814=ORIENTED_EDGE('',*,*,#3815,.T.);+#3815=EDGE_CURVE('',#1902,#1970,#3816,.T.);+#3816=LINE('',#1903,#260);+#3817=ORIENTED_EDGE('',*,*,#3805,.F.);+#3818=ORIENTED_EDGE('',*,*,#1908,.F.);+#3819=PLANE('',#3820);+#3820=AXIS2_PLACEMENT_3D('',#1903,#13,#965);+#3821=ADVANCED_FACE('',(#3822),#3829,.T.);+#3822=FACE_BOUND('',#3823,.F.);+#3823=EDGE_LOOP('',(#3824,#1968,#3827,#3828));+#3824=ORIENTED_EDGE('',*,*,#3825,.T.);+#3825=EDGE_CURVE('',#1897,#1965,#3826,.T.);+#3826=LINE('',#1898,#260);+#3827=ORIENTED_EDGE('',*,*,#3815,.F.);+#3828=ORIENTED_EDGE('',*,*,#1901,.F.);+#3829=CYLINDRICAL_SURFACE('',#3830,0.2);+#3830=AXIS2_PLACEMENT_3D('',#1906,#973,#989);+#3831=ADVANCED_FACE('',(#3832),#3839,.F.);+#3832=FACE_BOUND('',#3833,.F.);+#3833=EDGE_LOOP('',(#3834,#1963,#3837,#3838));+#3834=ORIENTED_EDGE('',*,*,#3835,.T.);+#3835=EDGE_CURVE('',#1890,#1958,#3836,.T.);+#3836=LINE('',#1891,#260);+#3837=ORIENTED_EDGE('',*,*,#3825,.F.);+#3838=ORIENTED_EDGE('',*,*,#1896,.F.);+#3839=PLANE('',#3840);+#3840=AXIS2_PLACEMENT_3D('',#1891,#3318,#981);+#3841=ADVANCED_FACE('',(#3842),#3849,.F.);+#3842=FACE_BOUND('',#3843,.F.);+#3843=EDGE_LOOP('',(#3844,#1956,#3847,#3848));+#3844=ORIENTED_EDGE('',*,*,#3845,.T.);+#3845=EDGE_CURVE('',#1884,#1952,#3846,.T.);+#3846=LINE('',#1885,#260);+#3847=ORIENTED_EDGE('',*,*,#3835,.F.);+#3848=ORIENTED_EDGE('',*,*,#1889,.F.);+#3849=CYLINDRICAL_SURFACE('',#1893,0.1);+#3850=ADVANCED_FACE('',(#3851),#3856,.F.);+#3851=FACE_BOUND('',#3852,.F.);+#3852=EDGE_LOOP('',(#3853,#3854,#1950,#3855));+#3853=ORIENTED_EDGE('',*,*,#1883,.F.);+#3854=ORIENTED_EDGE('',*,*,#3225,.T.);+#3855=ORIENTED_EDGE('',*,*,#3845,.F.);+#3856=PLANE('',#3857);+#3857=AXIS2_PLACEMENT_3D('',#1887,#13,#965);+#3858=ADVANCED_FACE('',(#3859),#3866,.F.);+#3859=FACE_BOUND('',#3860,.F.);+#3860=EDGE_LOOP('',(#3861,#2148,#3864,#3865));+#3861=ORIENTED_EDGE('',*,*,#3862,.T.);+#3862=EDGE_CURVE('',#2076,#2144,#3863,.T.);+#3863=LINE('',#2077,#260);+#3864=ORIENTED_EDGE('',*,*,#2164,.F.);+#3865=ORIENTED_EDGE('',*,*,#2081,.F.);+#3866=PLANE('',#3867);+#3867=AXIS2_PLACEMENT_3D('',#2077,#3257,#1019);+#3868=ADVANCED_FACE('',(#3869),#3876,.F.);+#3869=FACE_BOUND('',#3870,.F.);+#3870=EDGE_LOOP('',(#3871,#2142,#3874,#3875));+#3871=ORIENTED_EDGE('',*,*,#3872,.T.);+#3872=EDGE_CURVE('',#2071,#2139,#3873,.T.);+#3873=LINE('',#2072,#260);+#3874=ORIENTED_EDGE('',*,*,#3862,.F.);+#3875=ORIENTED_EDGE('',*,*,#2075,.F.);+#3876=CYLINDRICAL_SURFACE('',#3877,1.E-01);+#3877=AXIS2_PLACEMENT_3D('',#2058,#973,#1012);+#3878=ADVANCED_FACE('',(#3879),#3886,.F.);+#3879=FACE_BOUND('',#3880,.F.);+#3880=EDGE_LOOP('',(#3881,#2137,#3884,#3885));+#3881=ORIENTED_EDGE('',*,*,#3882,.T.);+#3882=EDGE_CURVE('',#2066,#2134,#3883,.T.);+#3883=LINE('',#2067,#260);+#3884=ORIENTED_EDGE('',*,*,#3872,.F.);+#3885=ORIENTED_EDGE('',*,*,#2070,.F.);+#3886=PLANE('',#3887);+#3887=AXIS2_PLACEMENT_3D('',#2067,#273,#217);+#3888=ADVANCED_FACE('',(#3889),#3896,.F.);+#3889=FACE_BOUND('',#3890,.F.);+#3890=EDGE_LOOP('',(#3891,#2132,#3894,#3895));+#3891=ORIENTED_EDGE('',*,*,#3892,.T.);+#3892=EDGE_CURVE('',#2061,#2129,#3893,.T.);+#3893=LINE('',#2062,#260);+#3894=ORIENTED_EDGE('',*,*,#3882,.F.);+#3895=ORIENTED_EDGE('',*,*,#2065,.F.);+#3896=PLANE('',#3897);+#3897=AXIS2_PLACEMENT_3D('',#2062,#217,#13);+#3898=ADVANCED_FACE('',(#3899),#3906,.F.);+#3899=FACE_BOUND('',#3900,.F.);+#3900=EDGE_LOOP('',(#3901,#2127,#3904,#3905));+#3901=ORIENTED_EDGE('',*,*,#3902,.T.);+#3902=EDGE_CURVE('',#2054,#2122,#3903,.T.);+#3903=LINE('',#2055,#260);+#3904=ORIENTED_EDGE('',*,*,#3892,.F.);+#3905=ORIENTED_EDGE('',*,*,#2060,.F.);+#3906=PLANE('',#3907);+#3907=AXIS2_PLACEMENT_3D('',#2055,#13,#965);+#3908=ADVANCED_FACE('',(#3909),#3916,.T.);+#3909=FACE_BOUND('',#3910,.F.);+#3910=EDGE_LOOP('',(#3911,#2120,#3914,#3915));+#3911=ORIENTED_EDGE('',*,*,#3912,.T.);+#3912=EDGE_CURVE('',#2049,#2117,#3913,.T.);+#3913=LINE('',#2050,#260);+#3914=ORIENTED_EDGE('',*,*,#3902,.F.);+#3915=ORIENTED_EDGE('',*,*,#2053,.F.);+#3916=CYLINDRICAL_SURFACE('',#3917,0.2);+#3917=AXIS2_PLACEMENT_3D('',#2058,#973,#989);+#3918=ADVANCED_FACE('',(#3919),#3926,.F.);+#3919=FACE_BOUND('',#3920,.F.);+#3920=EDGE_LOOP('',(#3921,#2115,#3924,#3925));+#3921=ORIENTED_EDGE('',*,*,#3922,.T.);+#3922=EDGE_CURVE('',#2042,#2110,#3923,.T.);+#3923=LINE('',#2043,#260);+#3924=ORIENTED_EDGE('',*,*,#3912,.F.);+#3925=ORIENTED_EDGE('',*,*,#2048,.F.);+#3926=PLANE('',#3927);+#3927=AXIS2_PLACEMENT_3D('',#2043,#3318,#981);+#3928=ADVANCED_FACE('',(#3929),#3936,.F.);+#3929=FACE_BOUND('',#3930,.F.);+#3930=EDGE_LOOP('',(#3931,#2108,#3934,#3935));+#3931=ORIENTED_EDGE('',*,*,#3932,.T.);+#3932=EDGE_CURVE('',#2036,#2104,#3933,.T.);+#3933=LINE('',#2037,#260);+#3934=ORIENTED_EDGE('',*,*,#3922,.F.);+#3935=ORIENTED_EDGE('',*,*,#2041,.F.);+#3936=CYLINDRICAL_SURFACE('',#2045,0.1);+#3937=ADVANCED_FACE('',(#3938),#3943,.F.);+#3938=FACE_BOUND('',#3939,.F.);+#3939=EDGE_LOOP('',(#3940,#3941,#2102,#3942));+#3940=ORIENTED_EDGE('',*,*,#2035,.F.);+#3941=ORIENTED_EDGE('',*,*,#3222,.T.);+#3942=ORIENTED_EDGE('',*,*,#3932,.F.);+#3943=PLANE('',#3944);+#3944=AXIS2_PLACEMENT_3D('',#2039,#13,#965);+#3945=ADVANCED_FACE('',(#3946),#4013,.F.);+#3946=FACE_BOUND('',#3947,.F.);+#3947=EDGE_LOOP('',(#3948,#3949,#3955,#3963,#3970,#3978,#3983,#3988,#3993,#4000,#4007,#4012));+#3948=ORIENTED_EDGE('',*,*,#2206,.F.);+#3949=ORIENTED_EDGE('',*,*,#3950,.T.);+#3950=EDGE_CURVE('',#2202,#3951,#3953,.T.);+#3951=VERTEX_POINT('',#3952);+#3952=CARTESIAN_POINT('',(3.7,2.985,0.55));+#3953=LINE('',#3954,#49);+#3954=CARTESIAN_POINT('',(3.35,2.985,0.55));+#3955=ORIENTED_EDGE('',*,*,#3956,.T.);+#3956=EDGE_CURVE('',#3951,#3957,#3959,.T.);+#3957=VERTEX_POINT('',#3958);+#3958=CARTESIAN_POINT('',(3.798480775301,2.985,0.467364817767));+#3959=CIRCLE('',#3960,0.1);+#3960=AXIS2_PLACEMENT_3D('',#3961,#231,#3962);+#3961=CARTESIAN_POINT('',(3.7,2.985,0.45));+#3962=DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#3963=ORIENTED_EDGE('',*,*,#3964,.T.);+#3964=EDGE_CURVE('',#3957,#3965,#3967,.T.);+#3965=VERTEX_POINT('',#3966);+#3966=CARTESIAN_POINT('',(3.847120194575,2.985,0.165270364467));+#3967=LINE('',#3958,#3968);+#3968=VECTOR('',#3969,1.);+#3969=DIRECTION('',(0.158960115908,1.764811806781E-17,-0.987285005229));+#3970=ORIENTED_EDGE('',*,*,#3971,.T.);+#3971=EDGE_CURVE('',#3965,#3972,#3974,.T.);+#3972=VERTEX_POINT('',#3973);+#3973=CARTESIAN_POINT('',(4.044081745177,2.985,-2.22044604925E-16));+#3974=CIRCLE('',#3975,0.2);+#3975=AXIS2_PLACEMENT_3D('',#3976,#538,#3977);+#3976=CARTESIAN_POINT('',(4.044081745177,2.985,0.2));+#3977=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#3978=ORIENTED_EDGE('',*,*,#3979,.T.);+#3979=EDGE_CURVE('',#3972,#3980,#3982,.T.);+#3980=VERTEX_POINT('',#3981);+#3981=CARTESIAN_POINT('',(4.5,2.985,-2.22044604925E-16));+#3982=LINE('',#3973,#49);+#3983=ORIENTED_EDGE('',*,*,#3984,.T.);+#3984=EDGE_CURVE('',#3980,#3985,#3987,.T.);+#3985=VERTEX_POINT('',#3986);+#3986=CARTESIAN_POINT('',(4.5,2.985,1.E-01));+#3987=LINE('',#3981,#822);+#3988=ORIENTED_EDGE('',*,*,#3989,.T.);+#3989=EDGE_CURVE('',#3985,#3990,#3992,.T.);+#3990=VERTEX_POINT('',#3991);+#3991=CARTESIAN_POINT('',(4.044081745177,2.985,1.E-01));+#3992=LINE('',#3986,#545);+#3993=ORIENTED_EDGE('',*,*,#3994,.T.);+#3994=EDGE_CURVE('',#3990,#3995,#3997,.T.);+#3995=VERTEX_POINT('',#3996);+#3996=CARTESIAN_POINT('',(3.945600969876,2.985,0.182635182233));+#3997=CIRCLE('',#3998,1.E-01);+#3998=AXIS2_PLACEMENT_3D('',#3976,#231,#3999);+#3999=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#4000=ORIENTED_EDGE('',*,*,#4001,.T.);+#4001=EDGE_CURVE('',#3995,#4002,#4004,.T.);+#4002=VERTEX_POINT('',#4003);+#4003=CARTESIAN_POINT('',(3.896961550602,2.985,0.484729635533));+#4004=LINE('',#3996,#4005);+#4005=VECTOR('',#4006,1.);+#4006=DIRECTION('',(-0.158960115908,-1.764811806781E-17,0.987285005229));+#4007=ORIENTED_EDGE('',*,*,#4008,.T.);+#4008=EDGE_CURVE('',#4002,#2175,#4009,.T.);+#4009=CIRCLE('',#4010,0.2);+#4010=AXIS2_PLACEMENT_3D('',#3961,#538,#4011);+#4011=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#4012=ORIENTED_EDGE('',*,*,#2174,.T.);+#4013=PLANE('',#4014);+#4014=AXIS2_PLACEMENT_3D('',#4015,#538,#13);+#4015=CARTESIAN_POINT('',(3.912728288784,2.985,0.307097536874));+#4016=ADVANCED_FACE('',(#4017),#4080,.T.);+#4017=FACE_BOUND('',#4018,.T.);+#4018=EDGE_LOOP('',(#4019,#4025,#4031,#4038,#4043,#4050,#4055,#4060,#4065,#4071,#4076,#2181));+#4019=ORIENTED_EDGE('',*,*,#4020,.F.);+#4020=EDGE_CURVE('',#4021,#2183,#4023,.T.);+#4021=VERTEX_POINT('',#4022);+#4022=CARTESIAN_POINT('',(3.5,2.615,0.55));+#4023=LINE('',#4024,#822);+#4024=CARTESIAN_POINT('',(3.5,2.615,0.478548768437));+#4025=ORIENTED_EDGE('',*,*,#4026,.T.);+#4026=EDGE_CURVE('',#4021,#4027,#4029,.T.);+#4027=VERTEX_POINT('',#4028);+#4028=CARTESIAN_POINT('',(3.7,2.615,0.55));+#4029=LINE('',#4030,#49);+#4030=CARTESIAN_POINT('',(3.35,2.615,0.55));+#4031=ORIENTED_EDGE('',*,*,#4032,.T.);+#4032=EDGE_CURVE('',#4027,#4033,#4035,.T.);+#4033=VERTEX_POINT('',#4034);+#4034=CARTESIAN_POINT('',(3.798480775301,2.615,0.467364817767));+#4035=CIRCLE('',#4036,0.1);+#4036=AXIS2_PLACEMENT_3D('',#4037,#231,#3962);+#4037=CARTESIAN_POINT('',(3.7,2.615,0.45));+#4038=ORIENTED_EDGE('',*,*,#4039,.T.);+#4039=EDGE_CURVE('',#4033,#4040,#4042,.T.);+#4040=VERTEX_POINT('',#4041);+#4041=CARTESIAN_POINT('',(3.847120194575,2.615,0.165270364467));+#4042=LINE('',#4034,#3968);+#4043=ORIENTED_EDGE('',*,*,#4044,.T.);+#4044=EDGE_CURVE('',#4040,#4045,#4047,.T.);+#4045=VERTEX_POINT('',#4046);+#4046=CARTESIAN_POINT('',(4.044081745177,2.615,-2.22044604925E-16));+#4047=CIRCLE('',#4048,0.2);+#4048=AXIS2_PLACEMENT_3D('',#4049,#538,#3977);+#4049=CARTESIAN_POINT('',(4.044081745177,2.615,0.2));+#4050=ORIENTED_EDGE('',*,*,#4051,.T.);+#4051=EDGE_CURVE('',#4045,#4052,#4054,.T.);+#4052=VERTEX_POINT('',#4053);+#4053=CARTESIAN_POINT('',(4.5,2.615,-2.22044604925E-16));+#4054=LINE('',#4046,#49);+#4055=ORIENTED_EDGE('',*,*,#4056,.T.);+#4056=EDGE_CURVE('',#4052,#4057,#4059,.T.);+#4057=VERTEX_POINT('',#4058);+#4058=CARTESIAN_POINT('',(4.5,2.615,1.E-01));+#4059=LINE('',#4053,#822);+#4060=ORIENTED_EDGE('',*,*,#4061,.T.);+#4061=EDGE_CURVE('',#4057,#4062,#4064,.T.);+#4062=VERTEX_POINT('',#4063);+#4063=CARTESIAN_POINT('',(4.044081745177,2.615,1.E-01));+#4064=LINE('',#4058,#545);+#4065=ORIENTED_EDGE('',*,*,#4066,.T.);+#4066=EDGE_CURVE('',#4062,#4067,#4069,.T.);+#4067=VERTEX_POINT('',#4068);+#4068=CARTESIAN_POINT('',(3.945600969876,2.615,0.182635182233));+#4069=CIRCLE('',#4070,1.E-01);+#4070=AXIS2_PLACEMENT_3D('',#4049,#231,#3999);+#4071=ORIENTED_EDGE('',*,*,#4072,.T.);+#4072=EDGE_CURVE('',#4067,#4073,#4075,.T.);+#4073=VERTEX_POINT('',#4074);+#4074=CARTESIAN_POINT('',(3.896961550602,2.615,0.484729635533));+#4075=LINE('',#4068,#4005);+#4076=ORIENTED_EDGE('',*,*,#4077,.T.);+#4077=EDGE_CURVE('',#4073,#2178,#4078,.T.);+#4078=CIRCLE('',#4079,0.2);+#4079=AXIS2_PLACEMENT_3D('',#4037,#538,#4011);+#4080=PLANE('',#4081);+#4081=AXIS2_PLACEMENT_3D('',#4082,#538,#13);+#4082=CARTESIAN_POINT('',(3.912728288784,2.615,0.307097536874));+#4083=ADVANCED_FACE('',(#4084),#4091,.T.);+#4084=FACE_BOUND('',#4085,.F.);+#4085=EDGE_LOOP('',(#4086,#4076,#4089,#4090));+#4086=ORIENTED_EDGE('',*,*,#4087,.T.);+#4087=EDGE_CURVE('',#4002,#4073,#4088,.T.);+#4088=LINE('',#4003,#537);+#4089=ORIENTED_EDGE('',*,*,#2177,.F.);+#4090=ORIENTED_EDGE('',*,*,#4008,.F.);+#4091=CYLINDRICAL_SURFACE('',#4092,0.2);+#4092=AXIS2_PLACEMENT_3D('',#3961,#231,#4011);+#4093=ADVANCED_FACE('',(#4094),#4172,.F.);+#4094=FACE_BOUND('',#4095,.F.);+#4095=EDGE_LOOP('',(#4096,#4103,#4108,#4112,#4116,#4120,#4124,#4128,#4132,#4136,#4140,#4144,#4148,#4152,#4156,#4160,#4164,#4166,#4168,#4169));+#4096=ORIENTED_EDGE('',*,*,#4097,.T.);+#4097=EDGE_CURVE('',#4098,#4100,#4102,.T.);+#4098=VERTEX_POINT('',#4099);+#4099=CARTESIAN_POINT('',(3.404349547248,3.277174773624,0.1));+#4100=VERTEX_POINT('',#4101);+#4101=CARTESIAN_POINT('',(3.404349547248,-3.277174773624,0.1));+#4102=LINE('',#4099,#537);+#4103=ORIENTED_EDGE('',*,*,#4104,.T.);+#4104=EDGE_CURVE('',#4100,#4105,#4107,.T.);+#4105=VERTEX_POINT('',#4106);+#4106=CARTESIAN_POINT('',(3.5,-3.325,0.55));+#4107=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4101,#4106),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4108=ORIENTED_EDGE('',*,*,#4109,.F.);+#4109=EDGE_CURVE('',#4110,#4105,#2204,.T.);+#4110=VERTEX_POINT('',#4111);+#4111=CARTESIAN_POINT('',(3.5,-2.985,0.55));+#4112=ORIENTED_EDGE('',*,*,#4113,.F.);+#4113=EDGE_CURVE('',#4114,#4110,#2204,.T.);+#4114=VERTEX_POINT('',#4115);+#4115=CARTESIAN_POINT('',(3.5,-2.615,0.55));+#4116=ORIENTED_EDGE('',*,*,#4117,.F.);+#4117=EDGE_CURVE('',#4118,#4114,#2204,.T.);+#4118=VERTEX_POINT('',#4119);+#4119=CARTESIAN_POINT('',(3.5,-2.185,0.55));+#4120=ORIENTED_EDGE('',*,*,#4121,.F.);+#4121=EDGE_CURVE('',#4122,#4118,#2204,.T.);+#4122=VERTEX_POINT('',#4123);+#4123=CARTESIAN_POINT('',(3.5,-1.815,0.55));+#4124=ORIENTED_EDGE('',*,*,#4125,.F.);+#4125=EDGE_CURVE('',#4126,#4122,#2204,.T.);+#4126=VERTEX_POINT('',#4127);+#4127=CARTESIAN_POINT('',(3.5,-1.385,0.55));+#4128=ORIENTED_EDGE('',*,*,#4129,.F.);+#4129=EDGE_CURVE('',#4130,#4126,#2204,.T.);+#4130=VERTEX_POINT('',#4131);+#4131=CARTESIAN_POINT('',(3.5,-1.015,0.55));+#4132=ORIENTED_EDGE('',*,*,#4133,.F.);+#4133=EDGE_CURVE('',#4134,#4130,#2204,.T.);+#4134=VERTEX_POINT('',#4135);+#4135=CARTESIAN_POINT('',(3.5,-0.585,0.55));+#4136=ORIENTED_EDGE('',*,*,#4137,.F.);+#4137=EDGE_CURVE('',#4138,#4134,#2204,.T.);+#4138=VERTEX_POINT('',#4139);+#4139=CARTESIAN_POINT('',(3.5,-0.215,0.55));+#4140=ORIENTED_EDGE('',*,*,#4141,.F.);+#4141=EDGE_CURVE('',#4142,#4138,#2204,.T.);+#4142=VERTEX_POINT('',#4143);+#4143=CARTESIAN_POINT('',(3.5,0.215,0.55));+#4144=ORIENTED_EDGE('',*,*,#4145,.F.);+#4145=EDGE_CURVE('',#4146,#4142,#2204,.T.);+#4146=VERTEX_POINT('',#4147);+#4147=CARTESIAN_POINT('',(3.5,0.585,0.55));+#4148=ORIENTED_EDGE('',*,*,#4149,.F.);+#4149=EDGE_CURVE('',#4150,#4146,#2204,.T.);+#4150=VERTEX_POINT('',#4151);+#4151=CARTESIAN_POINT('',(3.5,1.015,0.55));+#4152=ORIENTED_EDGE('',*,*,#4153,.F.);+#4153=EDGE_CURVE('',#4154,#4150,#2204,.T.);+#4154=VERTEX_POINT('',#4155);+#4155=CARTESIAN_POINT('',(3.5,1.385,0.55));+#4156=ORIENTED_EDGE('',*,*,#4157,.F.);+#4157=EDGE_CURVE('',#4158,#4154,#2204,.T.);+#4158=VERTEX_POINT('',#4159);+#4159=CARTESIAN_POINT('',(3.5,1.815,0.55));+#4160=ORIENTED_EDGE('',*,*,#4161,.F.);+#4161=EDGE_CURVE('',#4162,#4158,#2204,.T.);+#4162=VERTEX_POINT('',#4163);+#4163=CARTESIAN_POINT('',(3.5,2.185,0.55));+#4164=ORIENTED_EDGE('',*,*,#4165,.F.);+#4165=EDGE_CURVE('',#4021,#4162,#2204,.T.);+#4166=ORIENTED_EDGE('',*,*,#4167,.F.);+#4167=EDGE_CURVE('',#2202,#4021,#2204,.T.);+#4168=ORIENTED_EDGE('',*,*,#2201,.F.);+#4169=ORIENTED_EDGE('',*,*,#4170,.F.);+#4170=EDGE_CURVE('',#4098,#2197,#4171,.T.);+#4171=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4099,#2198),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4172=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4099,#2198),(#4101,#4106)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4173=ADVANCED_FACE('',(#4174),#4182,.F.);+#4174=FACE_BOUND('',#4175,.F.);+#4175=EDGE_LOOP('',(#4176,#4179,#4180,#4181));+#4176=ORIENTED_EDGE('',*,*,#4177,.T.);+#4177=EDGE_CURVE('',#3214,#4098,#4178,.T.);+#4178=LINE('',#3215,#137);+#4179=ORIENTED_EDGE('',*,*,#4170,.T.);+#4180=ORIENTED_EDGE('',*,*,#2216,.F.);+#4181=ORIENTED_EDGE('',*,*,#3218,.F.);+#4182=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3215,#2218),(#4099,#2198)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4183=ADVANCED_FACE('',(#4184),#4248,.F.);+#4184=FACE_BOUND('',#4185,.F.);+#4185=EDGE_LOOP('',(#4186,#2657,#4187,#4188,#4189,#4193,#4197,#4201,#4205,#4209,#4213,#4217,#4221,#4225,#4229,#4233,#4237,#4241,#4245,#4247));+#4186=ORIENTED_EDGE('',*,*,#3204,.T.);+#4187=ORIENTED_EDGE('',*,*,#2239,.F.);+#4188=ORIENTED_EDGE('',*,*,#2559,.T.);+#4189=ORIENTED_EDGE('',*,*,#4190,.T.);+#4190=EDGE_CURVE('',#2552,#4191,#2560,.T.);+#4191=VERTEX_POINT('',#4192);+#4192=CARTESIAN_POINT('',(2.615,-3.425,0.65));+#4193=ORIENTED_EDGE('',*,*,#4194,.T.);+#4194=EDGE_CURVE('',#4191,#4195,#2560,.T.);+#4195=VERTEX_POINT('',#4196);+#4196=CARTESIAN_POINT('',(2.185,-3.425,0.65));+#4197=ORIENTED_EDGE('',*,*,#4198,.T.);+#4198=EDGE_CURVE('',#4195,#4199,#2560,.T.);+#4199=VERTEX_POINT('',#4200);+#4200=CARTESIAN_POINT('',(1.815,-3.425,0.65));+#4201=ORIENTED_EDGE('',*,*,#4202,.T.);+#4202=EDGE_CURVE('',#4199,#4203,#2560,.T.);+#4203=VERTEX_POINT('',#4204);+#4204=CARTESIAN_POINT('',(1.385,-3.425,0.65));+#4205=ORIENTED_EDGE('',*,*,#4206,.T.);+#4206=EDGE_CURVE('',#4203,#4207,#2560,.T.);+#4207=VERTEX_POINT('',#4208);+#4208=CARTESIAN_POINT('',(1.015,-3.425,0.65));+#4209=ORIENTED_EDGE('',*,*,#4210,.T.);+#4210=EDGE_CURVE('',#4207,#4211,#2560,.T.);+#4211=VERTEX_POINT('',#4212);+#4212=CARTESIAN_POINT('',(0.585,-3.425,0.65));+#4213=ORIENTED_EDGE('',*,*,#4214,.T.);+#4214=EDGE_CURVE('',#4211,#4215,#2560,.T.);+#4215=VERTEX_POINT('',#4216);+#4216=CARTESIAN_POINT('',(0.215,-3.425,0.65));+#4217=ORIENTED_EDGE('',*,*,#4218,.T.);+#4218=EDGE_CURVE('',#4215,#4219,#2560,.T.);+#4219=VERTEX_POINT('',#4220);+#4220=CARTESIAN_POINT('',(-0.215,-3.425,0.65));+#4221=ORIENTED_EDGE('',*,*,#4222,.T.);+#4222=EDGE_CURVE('',#4219,#4223,#2560,.T.);+#4223=VERTEX_POINT('',#4224);+#4224=CARTESIAN_POINT('',(-0.585,-3.425,0.65));+#4225=ORIENTED_EDGE('',*,*,#4226,.T.);+#4226=EDGE_CURVE('',#4223,#4227,#2560,.T.);+#4227=VERTEX_POINT('',#4228);+#4228=CARTESIAN_POINT('',(-1.015,-3.425,0.65));+#4229=ORIENTED_EDGE('',*,*,#4230,.T.);+#4230=EDGE_CURVE('',#4227,#4231,#2560,.T.);+#4231=VERTEX_POINT('',#4232);+#4232=CARTESIAN_POINT('',(-1.385,-3.425,0.65));+#4233=ORIENTED_EDGE('',*,*,#4234,.T.);+#4234=EDGE_CURVE('',#4231,#4235,#2560,.T.);+#4235=VERTEX_POINT('',#4236);+#4236=CARTESIAN_POINT('',(-1.815,-3.425,0.65));+#4237=ORIENTED_EDGE('',*,*,#4238,.T.);+#4238=EDGE_CURVE('',#4235,#4239,#2560,.T.);+#4239=VERTEX_POINT('',#4240);+#4240=CARTESIAN_POINT('',(-2.185,-3.425,0.65));+#4241=ORIENTED_EDGE('',*,*,#4242,.T.);+#4242=EDGE_CURVE('',#4239,#4243,#2560,.T.);+#4243=VERTEX_POINT('',#4244);+#4244=CARTESIAN_POINT('',(-2.615,-3.425,0.65));+#4245=ORIENTED_EDGE('',*,*,#4246,.T.);+#4246=EDGE_CURVE('',#4243,#2957,#2560,.T.);+#4247=ORIENTED_EDGE('',*,*,#2956,.T.);+#4248=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2241,#2245),(#2951,#3206)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4249=ADVANCED_FACE('',(#4250),#2210,.F.);+#4250=FACE_BOUND('',#4251,.F.);+#4251=EDGE_LOOP('',(#4019,#4252,#4253,#4257));+#4252=ORIENTED_EDGE('',*,*,#4165,.T.);+#4253=ORIENTED_EDGE('',*,*,#4254,.T.);+#4254=EDGE_CURVE('',#4162,#2293,#4255,.T.);+#4255=LINE('',#4256,#822);+#4256=CARTESIAN_POINT('',(3.5,2.185,0.478548768437));+#4257=ORIENTED_EDGE('',*,*,#2292,.F.);+#4258=ADVANCED_FACE('',(#4259),#4318,.F.);+#4259=FACE_BOUND('',#4260,.F.);+#4260=EDGE_LOOP('',(#4261,#4262,#4268,#4275,#4280,#4287,#4292,#4297,#4302,#4308,#4313,#4317));+#4261=ORIENTED_EDGE('',*,*,#4254,.F.);+#4262=ORIENTED_EDGE('',*,*,#4263,.T.);+#4263=EDGE_CURVE('',#4162,#4264,#4266,.T.);+#4264=VERTEX_POINT('',#4265);+#4265=CARTESIAN_POINT('',(3.7,2.185,0.55));+#4266=LINE('',#4267,#49);+#4267=CARTESIAN_POINT('',(3.35,2.185,0.55));+#4268=ORIENTED_EDGE('',*,*,#4269,.T.);+#4269=EDGE_CURVE('',#4264,#4270,#4272,.T.);+#4270=VERTEX_POINT('',#4271);+#4271=CARTESIAN_POINT('',(3.798480775301,2.185,0.467364817767));+#4272=CIRCLE('',#4273,0.1);+#4273=AXIS2_PLACEMENT_3D('',#4274,#231,#3962);+#4274=CARTESIAN_POINT('',(3.7,2.185,0.45));+#4275=ORIENTED_EDGE('',*,*,#4276,.T.);+#4276=EDGE_CURVE('',#4270,#4277,#4279,.T.);+#4277=VERTEX_POINT('',#4278);+#4278=CARTESIAN_POINT('',(3.847120194575,2.185,0.165270364467));+#4279=LINE('',#4271,#3968);+#4280=ORIENTED_EDGE('',*,*,#4281,.T.);+#4281=EDGE_CURVE('',#4277,#4282,#4284,.T.);+#4282=VERTEX_POINT('',#4283);+#4283=CARTESIAN_POINT('',(4.044081745177,2.185,-2.22044604925E-16));+#4284=CIRCLE('',#4285,0.2);+#4285=AXIS2_PLACEMENT_3D('',#4286,#538,#3977);+#4286=CARTESIAN_POINT('',(4.044081745177,2.185,0.2));+#4287=ORIENTED_EDGE('',*,*,#4288,.T.);+#4288=EDGE_CURVE('',#4282,#4289,#4291,.T.);+#4289=VERTEX_POINT('',#4290);+#4290=CARTESIAN_POINT('',(4.5,2.185,-2.22044604925E-16));+#4291=LINE('',#4283,#49);+#4292=ORIENTED_EDGE('',*,*,#4293,.T.);+#4293=EDGE_CURVE('',#4289,#4294,#4296,.T.);+#4294=VERTEX_POINT('',#4295);+#4295=CARTESIAN_POINT('',(4.5,2.185,1.E-01));+#4296=LINE('',#4290,#822);+#4297=ORIENTED_EDGE('',*,*,#4298,.T.);+#4298=EDGE_CURVE('',#4294,#4299,#4301,.T.);+#4299=VERTEX_POINT('',#4300);+#4300=CARTESIAN_POINT('',(4.044081745177,2.185,1.E-01));+#4301=LINE('',#4295,#545);+#4302=ORIENTED_EDGE('',*,*,#4303,.T.);+#4303=EDGE_CURVE('',#4299,#4304,#4306,.T.);+#4304=VERTEX_POINT('',#4305);+#4305=CARTESIAN_POINT('',(3.945600969876,2.185,0.182635182233));+#4306=CIRCLE('',#4307,1.E-01);+#4307=AXIS2_PLACEMENT_3D('',#4286,#231,#3999);+#4308=ORIENTED_EDGE('',*,*,#4309,.T.);+#4309=EDGE_CURVE('',#4304,#4310,#4312,.T.);+#4310=VERTEX_POINT('',#4311);+#4311=CARTESIAN_POINT('',(3.896961550602,2.185,0.484729635533));+#4312=LINE('',#4305,#4005);+#4313=ORIENTED_EDGE('',*,*,#4314,.T.);+#4314=EDGE_CURVE('',#4310,#2305,#4315,.T.);+#4315=CIRCLE('',#4316,0.2);+#4316=AXIS2_PLACEMENT_3D('',#4274,#538,#4011);+#4317=ORIENTED_EDGE('',*,*,#2304,.T.);+#4318=PLANE('',#4319);+#4319=AXIS2_PLACEMENT_3D('',#4320,#538,#13);+#4320=CARTESIAN_POINT('',(3.912728288784,2.185,0.307097536874));+#4321=ADVANCED_FACE('',(#4322),#4383,.T.);+#4322=FACE_BOUND('',#4323,.T.);+#4323=EDGE_LOOP('',(#4324,#4328,#4334,#4341,#4346,#4353,#4358,#4363,#4368,#4374,#4379,#2311));+#4324=ORIENTED_EDGE('',*,*,#4325,.F.);+#4325=EDGE_CURVE('',#4158,#2313,#4326,.T.);+#4326=LINE('',#4327,#822);+#4327=CARTESIAN_POINT('',(3.5,1.815,0.478548768437));+#4328=ORIENTED_EDGE('',*,*,#4329,.T.);+#4329=EDGE_CURVE('',#4158,#4330,#4332,.T.);+#4330=VERTEX_POINT('',#4331);+#4331=CARTESIAN_POINT('',(3.7,1.815,0.55));+#4332=LINE('',#4333,#49);+#4333=CARTESIAN_POINT('',(3.35,1.815,0.55));+#4334=ORIENTED_EDGE('',*,*,#4335,.T.);+#4335=EDGE_CURVE('',#4330,#4336,#4338,.T.);+#4336=VERTEX_POINT('',#4337);+#4337=CARTESIAN_POINT('',(3.798480775301,1.815,0.467364817767));+#4338=CIRCLE('',#4339,0.1);+#4339=AXIS2_PLACEMENT_3D('',#4340,#231,#3962);+#4340=CARTESIAN_POINT('',(3.7,1.815,0.45));+#4341=ORIENTED_EDGE('',*,*,#4342,.T.);+#4342=EDGE_CURVE('',#4336,#4343,#4345,.T.);+#4343=VERTEX_POINT('',#4344);+#4344=CARTESIAN_POINT('',(3.847120194575,1.815,0.165270364467));+#4345=LINE('',#4337,#3968);+#4346=ORIENTED_EDGE('',*,*,#4347,.T.);+#4347=EDGE_CURVE('',#4343,#4348,#4350,.T.);+#4348=VERTEX_POINT('',#4349);+#4349=CARTESIAN_POINT('',(4.044081745177,1.815,-2.22044604925E-16));+#4350=CIRCLE('',#4351,0.2);+#4351=AXIS2_PLACEMENT_3D('',#4352,#538,#3977);+#4352=CARTESIAN_POINT('',(4.044081745177,1.815,0.2));+#4353=ORIENTED_EDGE('',*,*,#4354,.T.);+#4354=EDGE_CURVE('',#4348,#4355,#4357,.T.);+#4355=VERTEX_POINT('',#4356);+#4356=CARTESIAN_POINT('',(4.5,1.815,-2.22044604925E-16));+#4357=LINE('',#4349,#49);+#4358=ORIENTED_EDGE('',*,*,#4359,.T.);+#4359=EDGE_CURVE('',#4355,#4360,#4362,.T.);+#4360=VERTEX_POINT('',#4361);+#4361=CARTESIAN_POINT('',(4.5,1.815,1.E-01));+#4362=LINE('',#4356,#822);+#4363=ORIENTED_EDGE('',*,*,#4364,.T.);+#4364=EDGE_CURVE('',#4360,#4365,#4367,.T.);+#4365=VERTEX_POINT('',#4366);+#4366=CARTESIAN_POINT('',(4.044081745177,1.815,1.E-01));+#4367=LINE('',#4361,#545);+#4368=ORIENTED_EDGE('',*,*,#4369,.T.);+#4369=EDGE_CURVE('',#4365,#4370,#4372,.T.);+#4370=VERTEX_POINT('',#4371);+#4371=CARTESIAN_POINT('',(3.945600969876,1.815,0.182635182233));+#4372=CIRCLE('',#4373,1.E-01);+#4373=AXIS2_PLACEMENT_3D('',#4352,#231,#3999);+#4374=ORIENTED_EDGE('',*,*,#4375,.T.);+#4375=EDGE_CURVE('',#4370,#4376,#4378,.T.);+#4376=VERTEX_POINT('',#4377);+#4377=CARTESIAN_POINT('',(3.896961550602,1.815,0.484729635533));+#4378=LINE('',#4371,#4005);+#4379=ORIENTED_EDGE('',*,*,#4380,.T.);+#4380=EDGE_CURVE('',#4376,#2308,#4381,.T.);+#4381=CIRCLE('',#4382,0.2);+#4382=AXIS2_PLACEMENT_3D('',#4340,#538,#4011);+#4383=PLANE('',#4384);+#4384=AXIS2_PLACEMENT_3D('',#4385,#538,#13);+#4385=CARTESIAN_POINT('',(3.912728288784,1.815,0.307097536874));+#4386=ADVANCED_FACE('',(#4387),#4394,.T.);+#4387=FACE_BOUND('',#4388,.F.);+#4388=EDGE_LOOP('',(#4389,#4379,#4392,#4393));+#4389=ORIENTED_EDGE('',*,*,#4390,.T.);+#4390=EDGE_CURVE('',#4310,#4376,#4391,.T.);+#4391=LINE('',#4311,#537);+#4392=ORIENTED_EDGE('',*,*,#2307,.F.);+#4393=ORIENTED_EDGE('',*,*,#4314,.F.);+#4394=CYLINDRICAL_SURFACE('',#4395,0.2);+#4395=AXIS2_PLACEMENT_3D('',#4274,#231,#4011);+#4396=ADVANCED_FACE('',(#4397),#2210,.F.);+#4397=FACE_BOUND('',#4398,.F.);+#4398=EDGE_LOOP('',(#4324,#4399,#4400,#4404));+#4399=ORIENTED_EDGE('',*,*,#4157,.T.);+#4400=ORIENTED_EDGE('',*,*,#4401,.T.);+#4401=EDGE_CURVE('',#4154,#2328,#4402,.T.);+#4402=LINE('',#4403,#822);+#4403=CARTESIAN_POINT('',(3.5,1.385,0.478548768437));+#4404=ORIENTED_EDGE('',*,*,#2327,.F.);+#4405=ADVANCED_FACE('',(#4406),#4465,.F.);+#4406=FACE_BOUND('',#4407,.F.);+#4407=EDGE_LOOP('',(#4408,#4409,#4415,#4422,#4427,#4434,#4439,#4444,#4449,#4455,#4460,#4464));+#4408=ORIENTED_EDGE('',*,*,#4401,.F.);+#4409=ORIENTED_EDGE('',*,*,#4410,.T.);+#4410=EDGE_CURVE('',#4154,#4411,#4413,.T.);+#4411=VERTEX_POINT('',#4412);+#4412=CARTESIAN_POINT('',(3.7,1.385,0.55));+#4413=LINE('',#4414,#49);+#4414=CARTESIAN_POINT('',(3.35,1.385,0.55));+#4415=ORIENTED_EDGE('',*,*,#4416,.T.);+#4416=EDGE_CURVE('',#4411,#4417,#4419,.T.);+#4417=VERTEX_POINT('',#4418);+#4418=CARTESIAN_POINT('',(3.798480775301,1.385,0.467364817767));+#4419=CIRCLE('',#4420,0.1);+#4420=AXIS2_PLACEMENT_3D('',#4421,#231,#3962);+#4421=CARTESIAN_POINT('',(3.7,1.385,0.45));+#4422=ORIENTED_EDGE('',*,*,#4423,.T.);+#4423=EDGE_CURVE('',#4417,#4424,#4426,.T.);+#4424=VERTEX_POINT('',#4425);+#4425=CARTESIAN_POINT('',(3.847120194575,1.385,0.165270364467));+#4426=LINE('',#4418,#3968);+#4427=ORIENTED_EDGE('',*,*,#4428,.T.);+#4428=EDGE_CURVE('',#4424,#4429,#4431,.T.);+#4429=VERTEX_POINT('',#4430);+#4430=CARTESIAN_POINT('',(4.044081745177,1.385,-2.22044604925E-16));+#4431=CIRCLE('',#4432,0.2);+#4432=AXIS2_PLACEMENT_3D('',#4433,#538,#3977);+#4433=CARTESIAN_POINT('',(4.044081745177,1.385,0.2));+#4434=ORIENTED_EDGE('',*,*,#4435,.T.);+#4435=EDGE_CURVE('',#4429,#4436,#4438,.T.);+#4436=VERTEX_POINT('',#4437);+#4437=CARTESIAN_POINT('',(4.5,1.385,-2.22044604925E-16));+#4438=LINE('',#4430,#49);+#4439=ORIENTED_EDGE('',*,*,#4440,.T.);+#4440=EDGE_CURVE('',#4436,#4441,#4443,.T.);+#4441=VERTEX_POINT('',#4442);+#4442=CARTESIAN_POINT('',(4.5,1.385,1.E-01));+#4443=LINE('',#4437,#822);+#4444=ORIENTED_EDGE('',*,*,#4445,.T.);+#4445=EDGE_CURVE('',#4441,#4446,#4448,.T.);+#4446=VERTEX_POINT('',#4447);+#4447=CARTESIAN_POINT('',(4.044081745177,1.385,1.E-01));+#4448=LINE('',#4442,#545);+#4449=ORIENTED_EDGE('',*,*,#4450,.T.);+#4450=EDGE_CURVE('',#4446,#4451,#4453,.T.);+#4451=VERTEX_POINT('',#4452);+#4452=CARTESIAN_POINT('',(3.945600969876,1.385,0.182635182233));+#4453=CIRCLE('',#4454,1.E-01);+#4454=AXIS2_PLACEMENT_3D('',#4433,#231,#3999);+#4455=ORIENTED_EDGE('',*,*,#4456,.T.);+#4456=EDGE_CURVE('',#4451,#4457,#4459,.T.);+#4457=VERTEX_POINT('',#4458);+#4458=CARTESIAN_POINT('',(3.896961550602,1.385,0.484729635533));+#4459=LINE('',#4452,#4005);+#4460=ORIENTED_EDGE('',*,*,#4461,.T.);+#4461=EDGE_CURVE('',#4457,#2340,#4462,.T.);+#4462=CIRCLE('',#4463,0.2);+#4463=AXIS2_PLACEMENT_3D('',#4421,#538,#4011);+#4464=ORIENTED_EDGE('',*,*,#2339,.T.);+#4465=PLANE('',#4466);+#4466=AXIS2_PLACEMENT_3D('',#4467,#538,#13);+#4467=CARTESIAN_POINT('',(3.912728288784,1.385,0.307097536874));+#4468=ADVANCED_FACE('',(#4469),#4530,.T.);+#4469=FACE_BOUND('',#4470,.T.);+#4470=EDGE_LOOP('',(#4471,#4475,#4481,#4488,#4493,#4500,#4505,#4510,#4515,#4521,#4526,#2346));+#4471=ORIENTED_EDGE('',*,*,#4472,.F.);+#4472=EDGE_CURVE('',#4150,#2348,#4473,.T.);+#4473=LINE('',#4474,#822);+#4474=CARTESIAN_POINT('',(3.5,1.015,0.478548768437));+#4475=ORIENTED_EDGE('',*,*,#4476,.T.);+#4476=EDGE_CURVE('',#4150,#4477,#4479,.T.);+#4477=VERTEX_POINT('',#4478);+#4478=CARTESIAN_POINT('',(3.7,1.015,0.55));+#4479=LINE('',#4480,#49);+#4480=CARTESIAN_POINT('',(3.35,1.015,0.55));+#4481=ORIENTED_EDGE('',*,*,#4482,.T.);+#4482=EDGE_CURVE('',#4477,#4483,#4485,.T.);+#4483=VERTEX_POINT('',#4484);+#4484=CARTESIAN_POINT('',(3.798480775301,1.015,0.467364817767));+#4485=CIRCLE('',#4486,0.1);+#4486=AXIS2_PLACEMENT_3D('',#4487,#231,#3962);+#4487=CARTESIAN_POINT('',(3.7,1.015,0.45));+#4488=ORIENTED_EDGE('',*,*,#4489,.T.);+#4489=EDGE_CURVE('',#4483,#4490,#4492,.T.);+#4490=VERTEX_POINT('',#4491);+#4491=CARTESIAN_POINT('',(3.847120194575,1.015,0.165270364467));+#4492=LINE('',#4484,#3968);+#4493=ORIENTED_EDGE('',*,*,#4494,.T.);+#4494=EDGE_CURVE('',#4490,#4495,#4497,.T.);+#4495=VERTEX_POINT('',#4496);+#4496=CARTESIAN_POINT('',(4.044081745177,1.015,-2.22044604925E-16));+#4497=CIRCLE('',#4498,0.2);+#4498=AXIS2_PLACEMENT_3D('',#4499,#538,#3977);+#4499=CARTESIAN_POINT('',(4.044081745177,1.015,0.2));+#4500=ORIENTED_EDGE('',*,*,#4501,.T.);+#4501=EDGE_CURVE('',#4495,#4502,#4504,.T.);+#4502=VERTEX_POINT('',#4503);+#4503=CARTESIAN_POINT('',(4.5,1.015,-2.22044604925E-16));+#4504=LINE('',#4496,#49);+#4505=ORIENTED_EDGE('',*,*,#4506,.T.);+#4506=EDGE_CURVE('',#4502,#4507,#4509,.T.);+#4507=VERTEX_POINT('',#4508);+#4508=CARTESIAN_POINT('',(4.5,1.015,1.E-01));+#4509=LINE('',#4503,#822);+#4510=ORIENTED_EDGE('',*,*,#4511,.T.);+#4511=EDGE_CURVE('',#4507,#4512,#4514,.T.);+#4512=VERTEX_POINT('',#4513);+#4513=CARTESIAN_POINT('',(4.044081745177,1.015,1.E-01));+#4514=LINE('',#4508,#545);+#4515=ORIENTED_EDGE('',*,*,#4516,.T.);+#4516=EDGE_CURVE('',#4512,#4517,#4519,.T.);+#4517=VERTEX_POINT('',#4518);+#4518=CARTESIAN_POINT('',(3.945600969876,1.015,0.182635182233));+#4519=CIRCLE('',#4520,1.E-01);+#4520=AXIS2_PLACEMENT_3D('',#4499,#231,#3999);+#4521=ORIENTED_EDGE('',*,*,#4522,.T.);+#4522=EDGE_CURVE('',#4517,#4523,#4525,.T.);+#4523=VERTEX_POINT('',#4524);+#4524=CARTESIAN_POINT('',(3.896961550602,1.015,0.484729635533));+#4525=LINE('',#4518,#4005);+#4526=ORIENTED_EDGE('',*,*,#4527,.T.);+#4527=EDGE_CURVE('',#4523,#2343,#4528,.T.);+#4528=CIRCLE('',#4529,0.2);+#4529=AXIS2_PLACEMENT_3D('',#4487,#538,#4011);+#4530=PLANE('',#4531);+#4531=AXIS2_PLACEMENT_3D('',#4532,#538,#13);+#4532=CARTESIAN_POINT('',(3.912728288784,1.015,0.307097536874));+#4533=ADVANCED_FACE('',(#4534),#4541,.T.);+#4534=FACE_BOUND('',#4535,.F.);+#4535=EDGE_LOOP('',(#4536,#4526,#4539,#4540));+#4536=ORIENTED_EDGE('',*,*,#4537,.T.);+#4537=EDGE_CURVE('',#4457,#4523,#4538,.T.);+#4538=LINE('',#4458,#537);+#4539=ORIENTED_EDGE('',*,*,#2342,.F.);+#4540=ORIENTED_EDGE('',*,*,#4461,.F.);+#4541=CYLINDRICAL_SURFACE('',#4542,0.2);+#4542=AXIS2_PLACEMENT_3D('',#4421,#231,#4011);+#4543=ADVANCED_FACE('',(#4544),#2210,.F.);+#4544=FACE_BOUND('',#4545,.F.);+#4545=EDGE_LOOP('',(#4471,#4546,#4547,#4551));+#4546=ORIENTED_EDGE('',*,*,#4149,.T.);+#4547=ORIENTED_EDGE('',*,*,#4548,.T.);+#4548=EDGE_CURVE('',#4146,#2363,#4549,.T.);+#4549=LINE('',#4550,#822);+#4550=CARTESIAN_POINT('',(3.5,0.585,0.478548768437));+#4551=ORIENTED_EDGE('',*,*,#2362,.F.);+#4552=ADVANCED_FACE('',(#4553),#4612,.F.);+#4553=FACE_BOUND('',#4554,.F.);+#4554=EDGE_LOOP('',(#4555,#4556,#4562,#4569,#4574,#4581,#4586,#4591,#4596,#4602,#4607,#4611));+#4555=ORIENTED_EDGE('',*,*,#4548,.F.);+#4556=ORIENTED_EDGE('',*,*,#4557,.T.);+#4557=EDGE_CURVE('',#4146,#4558,#4560,.T.);+#4558=VERTEX_POINT('',#4559);+#4559=CARTESIAN_POINT('',(3.7,0.585,0.55));+#4560=LINE('',#4561,#49);+#4561=CARTESIAN_POINT('',(3.35,0.585,0.55));+#4562=ORIENTED_EDGE('',*,*,#4563,.T.);+#4563=EDGE_CURVE('',#4558,#4564,#4566,.T.);+#4564=VERTEX_POINT('',#4565);+#4565=CARTESIAN_POINT('',(3.798480775301,0.585,0.467364817767));+#4566=CIRCLE('',#4567,0.1);+#4567=AXIS2_PLACEMENT_3D('',#4568,#231,#3962);+#4568=CARTESIAN_POINT('',(3.7,0.585,0.45));+#4569=ORIENTED_EDGE('',*,*,#4570,.T.);+#4570=EDGE_CURVE('',#4564,#4571,#4573,.T.);+#4571=VERTEX_POINT('',#4572);+#4572=CARTESIAN_POINT('',(3.847120194575,0.585,0.165270364467));+#4573=LINE('',#4565,#3968);+#4574=ORIENTED_EDGE('',*,*,#4575,.T.);+#4575=EDGE_CURVE('',#4571,#4576,#4578,.T.);+#4576=VERTEX_POINT('',#4577);+#4577=CARTESIAN_POINT('',(4.044081745177,0.585,-2.22044604925E-16));+#4578=CIRCLE('',#4579,0.2);+#4579=AXIS2_PLACEMENT_3D('',#4580,#538,#3977);+#4580=CARTESIAN_POINT('',(4.044081745177,0.585,0.2));+#4581=ORIENTED_EDGE('',*,*,#4582,.T.);+#4582=EDGE_CURVE('',#4576,#4583,#4585,.T.);+#4583=VERTEX_POINT('',#4584);+#4584=CARTESIAN_POINT('',(4.5,0.585,-2.22044604925E-16));+#4585=LINE('',#4577,#49);+#4586=ORIENTED_EDGE('',*,*,#4587,.T.);+#4587=EDGE_CURVE('',#4583,#4588,#4590,.T.);+#4588=VERTEX_POINT('',#4589);+#4589=CARTESIAN_POINT('',(4.5,0.585,1.E-01));+#4590=LINE('',#4584,#822);+#4591=ORIENTED_EDGE('',*,*,#4592,.T.);+#4592=EDGE_CURVE('',#4588,#4593,#4595,.T.);+#4593=VERTEX_POINT('',#4594);+#4594=CARTESIAN_POINT('',(4.044081745177,0.585,1.E-01));+#4595=LINE('',#4589,#545);+#4596=ORIENTED_EDGE('',*,*,#4597,.T.);+#4597=EDGE_CURVE('',#4593,#4598,#4600,.T.);+#4598=VERTEX_POINT('',#4599);+#4599=CARTESIAN_POINT('',(3.945600969876,0.585,0.182635182233));+#4600=CIRCLE('',#4601,1.E-01);+#4601=AXIS2_PLACEMENT_3D('',#4580,#231,#3999);+#4602=ORIENTED_EDGE('',*,*,#4603,.T.);+#4603=EDGE_CURVE('',#4598,#4604,#4606,.T.);+#4604=VERTEX_POINT('',#4605);+#4605=CARTESIAN_POINT('',(3.896961550602,0.585,0.484729635533));+#4606=LINE('',#4599,#4005);+#4607=ORIENTED_EDGE('',*,*,#4608,.T.);+#4608=EDGE_CURVE('',#4604,#2375,#4609,.T.);+#4609=CIRCLE('',#4610,0.2);+#4610=AXIS2_PLACEMENT_3D('',#4568,#538,#4011);+#4611=ORIENTED_EDGE('',*,*,#2374,.T.);+#4612=PLANE('',#4613);+#4613=AXIS2_PLACEMENT_3D('',#4614,#538,#13);+#4614=CARTESIAN_POINT('',(3.912728288784,0.585,0.307097536874));+#4615=ADVANCED_FACE('',(#4616),#4677,.T.);+#4616=FACE_BOUND('',#4617,.T.);+#4617=EDGE_LOOP('',(#4618,#4622,#4628,#4635,#4640,#4647,#4652,#4657,#4662,#4668,#4673,#2381));+#4618=ORIENTED_EDGE('',*,*,#4619,.F.);+#4619=EDGE_CURVE('',#4142,#2383,#4620,.T.);+#4620=LINE('',#4621,#822);+#4621=CARTESIAN_POINT('',(3.5,0.215,0.478548768437));+#4622=ORIENTED_EDGE('',*,*,#4623,.T.);+#4623=EDGE_CURVE('',#4142,#4624,#4626,.T.);+#4624=VERTEX_POINT('',#4625);+#4625=CARTESIAN_POINT('',(3.7,0.215,0.55));+#4626=LINE('',#4627,#49);+#4627=CARTESIAN_POINT('',(3.35,0.215,0.55));+#4628=ORIENTED_EDGE('',*,*,#4629,.T.);+#4629=EDGE_CURVE('',#4624,#4630,#4632,.T.);+#4630=VERTEX_POINT('',#4631);+#4631=CARTESIAN_POINT('',(3.798480775301,0.215,0.467364817767));+#4632=CIRCLE('',#4633,0.1);+#4633=AXIS2_PLACEMENT_3D('',#4634,#231,#3962);+#4634=CARTESIAN_POINT('',(3.7,0.215,0.45));+#4635=ORIENTED_EDGE('',*,*,#4636,.T.);+#4636=EDGE_CURVE('',#4630,#4637,#4639,.T.);+#4637=VERTEX_POINT('',#4638);+#4638=CARTESIAN_POINT('',(3.847120194575,0.215,0.165270364467));+#4639=LINE('',#4631,#3968);+#4640=ORIENTED_EDGE('',*,*,#4641,.T.);+#4641=EDGE_CURVE('',#4637,#4642,#4644,.T.);+#4642=VERTEX_POINT('',#4643);+#4643=CARTESIAN_POINT('',(4.044081745177,0.215,-2.22044604925E-16));+#4644=CIRCLE('',#4645,0.2);+#4645=AXIS2_PLACEMENT_3D('',#4646,#538,#3977);+#4646=CARTESIAN_POINT('',(4.044081745177,0.215,0.2));+#4647=ORIENTED_EDGE('',*,*,#4648,.T.);+#4648=EDGE_CURVE('',#4642,#4649,#4651,.T.);+#4649=VERTEX_POINT('',#4650);+#4650=CARTESIAN_POINT('',(4.5,0.215,-2.22044604925E-16));+#4651=LINE('',#4643,#49);+#4652=ORIENTED_EDGE('',*,*,#4653,.T.);+#4653=EDGE_CURVE('',#4649,#4654,#4656,.T.);+#4654=VERTEX_POINT('',#4655);+#4655=CARTESIAN_POINT('',(4.5,0.215,1.E-01));+#4656=LINE('',#4650,#822);+#4657=ORIENTED_EDGE('',*,*,#4658,.T.);+#4658=EDGE_CURVE('',#4654,#4659,#4661,.T.);+#4659=VERTEX_POINT('',#4660);+#4660=CARTESIAN_POINT('',(4.044081745177,0.215,1.E-01));+#4661=LINE('',#4655,#545);+#4662=ORIENTED_EDGE('',*,*,#4663,.T.);+#4663=EDGE_CURVE('',#4659,#4664,#4666,.T.);+#4664=VERTEX_POINT('',#4665);+#4665=CARTESIAN_POINT('',(3.945600969876,0.215,0.182635182233));+#4666=CIRCLE('',#4667,1.E-01);+#4667=AXIS2_PLACEMENT_3D('',#4646,#231,#3999);+#4668=ORIENTED_EDGE('',*,*,#4669,.T.);+#4669=EDGE_CURVE('',#4664,#4670,#4672,.T.);+#4670=VERTEX_POINT('',#4671);+#4671=CARTESIAN_POINT('',(3.896961550602,0.215,0.484729635533));+#4672=LINE('',#4665,#4005);+#4673=ORIENTED_EDGE('',*,*,#4674,.T.);+#4674=EDGE_CURVE('',#4670,#2378,#4675,.T.);+#4675=CIRCLE('',#4676,0.2);+#4676=AXIS2_PLACEMENT_3D('',#4634,#538,#4011);+#4677=PLANE('',#4678);+#4678=AXIS2_PLACEMENT_3D('',#4679,#538,#13);+#4679=CARTESIAN_POINT('',(3.912728288784,0.215,0.307097536874));+#4680=ADVANCED_FACE('',(#4681),#4688,.T.);+#4681=FACE_BOUND('',#4682,.F.);+#4682=EDGE_LOOP('',(#4683,#4673,#4686,#4687));+#4683=ORIENTED_EDGE('',*,*,#4684,.T.);+#4684=EDGE_CURVE('',#4604,#4670,#4685,.T.);+#4685=LINE('',#4605,#537);+#4686=ORIENTED_EDGE('',*,*,#2377,.F.);+#4687=ORIENTED_EDGE('',*,*,#4608,.F.);+#4688=CYLINDRICAL_SURFACE('',#4689,0.2);+#4689=AXIS2_PLACEMENT_3D('',#4568,#231,#4011);+#4690=ADVANCED_FACE('',(#4691),#2210,.F.);+#4691=FACE_BOUND('',#4692,.F.);+#4692=EDGE_LOOP('',(#4618,#4693,#4694,#4698));+#4693=ORIENTED_EDGE('',*,*,#4141,.T.);+#4694=ORIENTED_EDGE('',*,*,#4695,.T.);+#4695=EDGE_CURVE('',#4138,#2398,#4696,.T.);+#4696=LINE('',#4697,#822);+#4697=CARTESIAN_POINT('',(3.5,-0.215,0.478548768437));+#4698=ORIENTED_EDGE('',*,*,#2397,.F.);+#4699=ADVANCED_FACE('',(#4700),#4759,.F.);+#4700=FACE_BOUND('',#4701,.F.);+#4701=EDGE_LOOP('',(#4702,#4703,#4709,#4716,#4721,#4728,#4733,#4738,#4743,#4749,#4754,#4758));+#4702=ORIENTED_EDGE('',*,*,#4695,.F.);+#4703=ORIENTED_EDGE('',*,*,#4704,.T.);+#4704=EDGE_CURVE('',#4138,#4705,#4707,.T.);+#4705=VERTEX_POINT('',#4706);+#4706=CARTESIAN_POINT('',(3.7,-0.215,0.55));+#4707=LINE('',#4708,#49);+#4708=CARTESIAN_POINT('',(3.35,-0.215,0.55));+#4709=ORIENTED_EDGE('',*,*,#4710,.T.);+#4710=EDGE_CURVE('',#4705,#4711,#4713,.T.);+#4711=VERTEX_POINT('',#4712);+#4712=CARTESIAN_POINT('',(3.798480775301,-0.215,0.467364817767));+#4713=CIRCLE('',#4714,0.1);+#4714=AXIS2_PLACEMENT_3D('',#4715,#231,#3962);+#4715=CARTESIAN_POINT('',(3.7,-0.215,0.45));+#4716=ORIENTED_EDGE('',*,*,#4717,.T.);+#4717=EDGE_CURVE('',#4711,#4718,#4720,.T.);+#4718=VERTEX_POINT('',#4719);+#4719=CARTESIAN_POINT('',(3.847120194575,-0.215,0.165270364467));+#4720=LINE('',#4712,#3968);+#4721=ORIENTED_EDGE('',*,*,#4722,.T.);+#4722=EDGE_CURVE('',#4718,#4723,#4725,.T.);+#4723=VERTEX_POINT('',#4724);+#4724=CARTESIAN_POINT('',(4.044081745177,-0.215,-2.22044604925E-16));+#4725=CIRCLE('',#4726,0.2);+#4726=AXIS2_PLACEMENT_3D('',#4727,#538,#3977);+#4727=CARTESIAN_POINT('',(4.044081745177,-0.215,0.2));+#4728=ORIENTED_EDGE('',*,*,#4729,.T.);+#4729=EDGE_CURVE('',#4723,#4730,#4732,.T.);+#4730=VERTEX_POINT('',#4731);+#4731=CARTESIAN_POINT('',(4.5,-0.215,-2.22044604925E-16));+#4732=LINE('',#4724,#49);+#4733=ORIENTED_EDGE('',*,*,#4734,.T.);+#4734=EDGE_CURVE('',#4730,#4735,#4737,.T.);+#4735=VERTEX_POINT('',#4736);+#4736=CARTESIAN_POINT('',(4.5,-0.215,1.E-01));+#4737=LINE('',#4731,#822);+#4738=ORIENTED_EDGE('',*,*,#4739,.T.);+#4739=EDGE_CURVE('',#4735,#4740,#4742,.T.);+#4740=VERTEX_POINT('',#4741);+#4741=CARTESIAN_POINT('',(4.044081745177,-0.215,1.E-01));+#4742=LINE('',#4736,#545);+#4743=ORIENTED_EDGE('',*,*,#4744,.T.);+#4744=EDGE_CURVE('',#4740,#4745,#4747,.T.);+#4745=VERTEX_POINT('',#4746);+#4746=CARTESIAN_POINT('',(3.945600969876,-0.215,0.182635182233));+#4747=CIRCLE('',#4748,1.E-01);+#4748=AXIS2_PLACEMENT_3D('',#4727,#231,#3999);+#4749=ORIENTED_EDGE('',*,*,#4750,.T.);+#4750=EDGE_CURVE('',#4745,#4751,#4753,.T.);+#4751=VERTEX_POINT('',#4752);+#4752=CARTESIAN_POINT('',(3.896961550602,-0.215,0.484729635533));+#4753=LINE('',#4746,#4005);+#4754=ORIENTED_EDGE('',*,*,#4755,.T.);+#4755=EDGE_CURVE('',#4751,#2410,#4756,.T.);+#4756=CIRCLE('',#4757,0.2);+#4757=AXIS2_PLACEMENT_3D('',#4715,#538,#4011);+#4758=ORIENTED_EDGE('',*,*,#2409,.T.);+#4759=PLANE('',#4760);+#4760=AXIS2_PLACEMENT_3D('',#4761,#538,#13);+#4761=CARTESIAN_POINT('',(3.912728288784,-0.215,0.307097536874));+#4762=ADVANCED_FACE('',(#4763),#4824,.T.);+#4763=FACE_BOUND('',#4764,.T.);+#4764=EDGE_LOOP('',(#4765,#4769,#4775,#4782,#4787,#4794,#4799,#4804,#4809,#4815,#4820,#2416));+#4765=ORIENTED_EDGE('',*,*,#4766,.F.);+#4766=EDGE_CURVE('',#4134,#2418,#4767,.T.);+#4767=LINE('',#4768,#822);+#4768=CARTESIAN_POINT('',(3.5,-0.585,0.478548768437));+#4769=ORIENTED_EDGE('',*,*,#4770,.T.);+#4770=EDGE_CURVE('',#4134,#4771,#4773,.T.);+#4771=VERTEX_POINT('',#4772);+#4772=CARTESIAN_POINT('',(3.7,-0.585,0.55));+#4773=LINE('',#4774,#49);+#4774=CARTESIAN_POINT('',(3.35,-0.585,0.55));+#4775=ORIENTED_EDGE('',*,*,#4776,.T.);+#4776=EDGE_CURVE('',#4771,#4777,#4779,.T.);+#4777=VERTEX_POINT('',#4778);+#4778=CARTESIAN_POINT('',(3.798480775301,-0.585,0.467364817767));+#4779=CIRCLE('',#4780,0.1);+#4780=AXIS2_PLACEMENT_3D('',#4781,#231,#3962);+#4781=CARTESIAN_POINT('',(3.7,-0.585,0.45));+#4782=ORIENTED_EDGE('',*,*,#4783,.T.);+#4783=EDGE_CURVE('',#4777,#4784,#4786,.T.);+#4784=VERTEX_POINT('',#4785);+#4785=CARTESIAN_POINT('',(3.847120194575,-0.585,0.165270364467));+#4786=LINE('',#4778,#3968);+#4787=ORIENTED_EDGE('',*,*,#4788,.T.);+#4788=EDGE_CURVE('',#4784,#4789,#4791,.T.);+#4789=VERTEX_POINT('',#4790);+#4790=CARTESIAN_POINT('',(4.044081745177,-0.585,-2.22044604925E-16));+#4791=CIRCLE('',#4792,0.2);+#4792=AXIS2_PLACEMENT_3D('',#4793,#538,#3977);+#4793=CARTESIAN_POINT('',(4.044081745177,-0.585,0.2));+#4794=ORIENTED_EDGE('',*,*,#4795,.T.);+#4795=EDGE_CURVE('',#4789,#4796,#4798,.T.);+#4796=VERTEX_POINT('',#4797);+#4797=CARTESIAN_POINT('',(4.5,-0.585,-2.22044604925E-16));+#4798=LINE('',#4790,#49);+#4799=ORIENTED_EDGE('',*,*,#4800,.T.);+#4800=EDGE_CURVE('',#4796,#4801,#4803,.T.);+#4801=VERTEX_POINT('',#4802);+#4802=CARTESIAN_POINT('',(4.5,-0.585,1.E-01));+#4803=LINE('',#4797,#822);+#4804=ORIENTED_EDGE('',*,*,#4805,.T.);+#4805=EDGE_CURVE('',#4801,#4806,#4808,.T.);+#4806=VERTEX_POINT('',#4807);+#4807=CARTESIAN_POINT('',(4.044081745177,-0.585,1.E-01));+#4808=LINE('',#4802,#545);+#4809=ORIENTED_EDGE('',*,*,#4810,.T.);+#4810=EDGE_CURVE('',#4806,#4811,#4813,.T.);+#4811=VERTEX_POINT('',#4812);+#4812=CARTESIAN_POINT('',(3.945600969876,-0.585,0.182635182233));+#4813=CIRCLE('',#4814,1.E-01);+#4814=AXIS2_PLACEMENT_3D('',#4793,#231,#3999);+#4815=ORIENTED_EDGE('',*,*,#4816,.T.);+#4816=EDGE_CURVE('',#4811,#4817,#4819,.T.);+#4817=VERTEX_POINT('',#4818);+#4818=CARTESIAN_POINT('',(3.896961550602,-0.585,0.484729635533));+#4819=LINE('',#4812,#4005);+#4820=ORIENTED_EDGE('',*,*,#4821,.T.);+#4821=EDGE_CURVE('',#4817,#2413,#4822,.T.);+#4822=CIRCLE('',#4823,0.2);+#4823=AXIS2_PLACEMENT_3D('',#4781,#538,#4011);+#4824=PLANE('',#4825);+#4825=AXIS2_PLACEMENT_3D('',#4826,#538,#13);+#4826=CARTESIAN_POINT('',(3.912728288784,-0.585,0.307097536874));+#4827=ADVANCED_FACE('',(#4828),#4835,.T.);+#4828=FACE_BOUND('',#4829,.F.);+#4829=EDGE_LOOP('',(#4830,#4820,#4833,#4834));+#4830=ORIENTED_EDGE('',*,*,#4831,.T.);+#4831=EDGE_CURVE('',#4751,#4817,#4832,.T.);+#4832=LINE('',#4752,#537);+#4833=ORIENTED_EDGE('',*,*,#2412,.F.);+#4834=ORIENTED_EDGE('',*,*,#4755,.F.);+#4835=CYLINDRICAL_SURFACE('',#4836,0.2);+#4836=AXIS2_PLACEMENT_3D('',#4715,#231,#4011);+#4837=ADVANCED_FACE('',(#4838),#2210,.F.);+#4838=FACE_BOUND('',#4839,.F.);+#4839=EDGE_LOOP('',(#4765,#4840,#4841,#4845));+#4840=ORIENTED_EDGE('',*,*,#4133,.T.);+#4841=ORIENTED_EDGE('',*,*,#4842,.T.);+#4842=EDGE_CURVE('',#4130,#2433,#4843,.T.);+#4843=LINE('',#4844,#822);+#4844=CARTESIAN_POINT('',(3.5,-1.015,0.478548768437));+#4845=ORIENTED_EDGE('',*,*,#2432,.F.);+#4846=ADVANCED_FACE('',(#4847),#4906,.F.);+#4847=FACE_BOUND('',#4848,.F.);+#4848=EDGE_LOOP('',(#4849,#4850,#4856,#4863,#4868,#4875,#4880,#4885,#4890,#4896,#4901,#4905));+#4849=ORIENTED_EDGE('',*,*,#4842,.F.);+#4850=ORIENTED_EDGE('',*,*,#4851,.T.);+#4851=EDGE_CURVE('',#4130,#4852,#4854,.T.);+#4852=VERTEX_POINT('',#4853);+#4853=CARTESIAN_POINT('',(3.7,-1.015,0.55));+#4854=LINE('',#4855,#49);+#4855=CARTESIAN_POINT('',(3.35,-1.015,0.55));+#4856=ORIENTED_EDGE('',*,*,#4857,.T.);+#4857=EDGE_CURVE('',#4852,#4858,#4860,.T.);+#4858=VERTEX_POINT('',#4859);+#4859=CARTESIAN_POINT('',(3.798480775301,-1.015,0.467364817767));+#4860=CIRCLE('',#4861,0.1);+#4861=AXIS2_PLACEMENT_3D('',#4862,#231,#3962);+#4862=CARTESIAN_POINT('',(3.7,-1.015,0.45));+#4863=ORIENTED_EDGE('',*,*,#4864,.T.);+#4864=EDGE_CURVE('',#4858,#4865,#4867,.T.);+#4865=VERTEX_POINT('',#4866);+#4866=CARTESIAN_POINT('',(3.847120194575,-1.015,0.165270364467));+#4867=LINE('',#4859,#3968);+#4868=ORIENTED_EDGE('',*,*,#4869,.T.);+#4869=EDGE_CURVE('',#4865,#4870,#4872,.T.);+#4870=VERTEX_POINT('',#4871);+#4871=CARTESIAN_POINT('',(4.044081745177,-1.015,-2.22044604925E-16));+#4872=CIRCLE('',#4873,0.2);+#4873=AXIS2_PLACEMENT_3D('',#4874,#538,#3977);+#4874=CARTESIAN_POINT('',(4.044081745177,-1.015,0.2));+#4875=ORIENTED_EDGE('',*,*,#4876,.T.);+#4876=EDGE_CURVE('',#4870,#4877,#4879,.T.);+#4877=VERTEX_POINT('',#4878);+#4878=CARTESIAN_POINT('',(4.5,-1.015,-2.22044604925E-16));+#4879=LINE('',#4871,#49);+#4880=ORIENTED_EDGE('',*,*,#4881,.T.);+#4881=EDGE_CURVE('',#4877,#4882,#4884,.T.);+#4882=VERTEX_POINT('',#4883);+#4883=CARTESIAN_POINT('',(4.5,-1.015,1.E-01));+#4884=LINE('',#4878,#822);+#4885=ORIENTED_EDGE('',*,*,#4886,.T.);+#4886=EDGE_CURVE('',#4882,#4887,#4889,.T.);+#4887=VERTEX_POINT('',#4888);+#4888=CARTESIAN_POINT('',(4.044081745177,-1.015,1.E-01));+#4889=LINE('',#4883,#545);+#4890=ORIENTED_EDGE('',*,*,#4891,.T.);+#4891=EDGE_CURVE('',#4887,#4892,#4894,.T.);+#4892=VERTEX_POINT('',#4893);+#4893=CARTESIAN_POINT('',(3.945600969876,-1.015,0.182635182233));+#4894=CIRCLE('',#4895,1.E-01);+#4895=AXIS2_PLACEMENT_3D('',#4874,#231,#3999);+#4896=ORIENTED_EDGE('',*,*,#4897,.T.);+#4897=EDGE_CURVE('',#4892,#4898,#4900,.T.);+#4898=VERTEX_POINT('',#4899);+#4899=CARTESIAN_POINT('',(3.896961550602,-1.015,0.484729635533));+#4900=LINE('',#4893,#4005);+#4901=ORIENTED_EDGE('',*,*,#4902,.T.);+#4902=EDGE_CURVE('',#4898,#2445,#4903,.T.);+#4903=CIRCLE('',#4904,0.2);+#4904=AXIS2_PLACEMENT_3D('',#4862,#538,#4011);+#4905=ORIENTED_EDGE('',*,*,#2444,.T.);+#4906=PLANE('',#4907);+#4907=AXIS2_PLACEMENT_3D('',#4908,#538,#13);+#4908=CARTESIAN_POINT('',(3.912728288784,-1.015,0.307097536874));+#4909=ADVANCED_FACE('',(#4910),#4971,.T.);+#4910=FACE_BOUND('',#4911,.T.);+#4911=EDGE_LOOP('',(#4912,#4916,#4922,#4929,#4934,#4941,#4946,#4951,#4956,#4962,#4967,#2451));+#4912=ORIENTED_EDGE('',*,*,#4913,.F.);+#4913=EDGE_CURVE('',#4126,#2453,#4914,.T.);+#4914=LINE('',#4915,#822);+#4915=CARTESIAN_POINT('',(3.5,-1.385,0.478548768437));+#4916=ORIENTED_EDGE('',*,*,#4917,.T.);+#4917=EDGE_CURVE('',#4126,#4918,#4920,.T.);+#4918=VERTEX_POINT('',#4919);+#4919=CARTESIAN_POINT('',(3.7,-1.385,0.55));+#4920=LINE('',#4921,#49);+#4921=CARTESIAN_POINT('',(3.35,-1.385,0.55));+#4922=ORIENTED_EDGE('',*,*,#4923,.T.);+#4923=EDGE_CURVE('',#4918,#4924,#4926,.T.);+#4924=VERTEX_POINT('',#4925);+#4925=CARTESIAN_POINT('',(3.798480775301,-1.385,0.467364817767));+#4926=CIRCLE('',#4927,0.1);+#4927=AXIS2_PLACEMENT_3D('',#4928,#231,#3962);+#4928=CARTESIAN_POINT('',(3.7,-1.385,0.45));+#4929=ORIENTED_EDGE('',*,*,#4930,.T.);+#4930=EDGE_CURVE('',#4924,#4931,#4933,.T.);+#4931=VERTEX_POINT('',#4932);+#4932=CARTESIAN_POINT('',(3.847120194575,-1.385,0.165270364467));+#4933=LINE('',#4925,#3968);+#4934=ORIENTED_EDGE('',*,*,#4935,.T.);+#4935=EDGE_CURVE('',#4931,#4936,#4938,.T.);+#4936=VERTEX_POINT('',#4937);+#4937=CARTESIAN_POINT('',(4.044081745177,-1.385,-2.22044604925E-16));+#4938=CIRCLE('',#4939,0.2);+#4939=AXIS2_PLACEMENT_3D('',#4940,#538,#3977);+#4940=CARTESIAN_POINT('',(4.044081745177,-1.385,0.2));+#4941=ORIENTED_EDGE('',*,*,#4942,.T.);+#4942=EDGE_CURVE('',#4936,#4943,#4945,.T.);+#4943=VERTEX_POINT('',#4944);+#4944=CARTESIAN_POINT('',(4.5,-1.385,-2.22044604925E-16));+#4945=LINE('',#4937,#49);+#4946=ORIENTED_EDGE('',*,*,#4947,.T.);+#4947=EDGE_CURVE('',#4943,#4948,#4950,.T.);+#4948=VERTEX_POINT('',#4949);+#4949=CARTESIAN_POINT('',(4.5,-1.385,1.E-01));+#4950=LINE('',#4944,#822);+#4951=ORIENTED_EDGE('',*,*,#4952,.T.);+#4952=EDGE_CURVE('',#4948,#4953,#4955,.T.);+#4953=VERTEX_POINT('',#4954);+#4954=CARTESIAN_POINT('',(4.044081745177,-1.385,1.E-01));+#4955=LINE('',#4949,#545);+#4956=ORIENTED_EDGE('',*,*,#4957,.T.);+#4957=EDGE_CURVE('',#4953,#4958,#4960,.T.);+#4958=VERTEX_POINT('',#4959);+#4959=CARTESIAN_POINT('',(3.945600969876,-1.385,0.182635182233));+#4960=CIRCLE('',#4961,1.E-01);+#4961=AXIS2_PLACEMENT_3D('',#4940,#231,#3999);+#4962=ORIENTED_EDGE('',*,*,#4963,.T.);+#4963=EDGE_CURVE('',#4958,#4964,#4966,.T.);+#4964=VERTEX_POINT('',#4965);+#4965=CARTESIAN_POINT('',(3.896961550602,-1.385,0.484729635533));+#4966=LINE('',#4959,#4005);+#4967=ORIENTED_EDGE('',*,*,#4968,.T.);+#4968=EDGE_CURVE('',#4964,#2448,#4969,.T.);+#4969=CIRCLE('',#4970,0.2);+#4970=AXIS2_PLACEMENT_3D('',#4928,#538,#4011);+#4971=PLANE('',#4972);+#4972=AXIS2_PLACEMENT_3D('',#4973,#538,#13);+#4973=CARTESIAN_POINT('',(3.912728288784,-1.385,0.307097536874));+#4974=ADVANCED_FACE('',(#4975),#4982,.T.);+#4975=FACE_BOUND('',#4976,.F.);+#4976=EDGE_LOOP('',(#4977,#4967,#4980,#4981));+#4977=ORIENTED_EDGE('',*,*,#4978,.T.);+#4978=EDGE_CURVE('',#4898,#4964,#4979,.T.);+#4979=LINE('',#4899,#537);+#4980=ORIENTED_EDGE('',*,*,#2447,.F.);+#4981=ORIENTED_EDGE('',*,*,#4902,.F.);+#4982=CYLINDRICAL_SURFACE('',#4983,0.2);+#4983=AXIS2_PLACEMENT_3D('',#4862,#231,#4011);+#4984=ADVANCED_FACE('',(#4985),#2210,.F.);+#4985=FACE_BOUND('',#4986,.F.);+#4986=EDGE_LOOP('',(#4912,#4987,#4988,#4992));+#4987=ORIENTED_EDGE('',*,*,#4125,.T.);+#4988=ORIENTED_EDGE('',*,*,#4989,.T.);+#4989=EDGE_CURVE('',#4122,#2468,#4990,.T.);+#4990=LINE('',#4991,#822);+#4991=CARTESIAN_POINT('',(3.5,-1.815,0.478548768437));+#4992=ORIENTED_EDGE('',*,*,#2467,.F.);+#4993=ADVANCED_FACE('',(#4994),#5053,.F.);+#4994=FACE_BOUND('',#4995,.F.);+#4995=EDGE_LOOP('',(#4996,#4997,#5003,#5010,#5015,#5022,#5027,#5032,#5037,#5043,#5048,#5052));+#4996=ORIENTED_EDGE('',*,*,#4989,.F.);+#4997=ORIENTED_EDGE('',*,*,#4998,.T.);+#4998=EDGE_CURVE('',#4122,#4999,#5001,.T.);+#4999=VERTEX_POINT('',#5000);+#5000=CARTESIAN_POINT('',(3.7,-1.815,0.55));+#5001=LINE('',#5002,#49);+#5002=CARTESIAN_POINT('',(3.35,-1.815,0.55));+#5003=ORIENTED_EDGE('',*,*,#5004,.T.);+#5004=EDGE_CURVE('',#4999,#5005,#5007,.T.);+#5005=VERTEX_POINT('',#5006);+#5006=CARTESIAN_POINT('',(3.798480775301,-1.815,0.467364817767));+#5007=CIRCLE('',#5008,0.1);+#5008=AXIS2_PLACEMENT_3D('',#5009,#231,#3962);+#5009=CARTESIAN_POINT('',(3.7,-1.815,0.45));+#5010=ORIENTED_EDGE('',*,*,#5011,.T.);+#5011=EDGE_CURVE('',#5005,#5012,#5014,.T.);+#5012=VERTEX_POINT('',#5013);+#5013=CARTESIAN_POINT('',(3.847120194575,-1.815,0.165270364467));+#5014=LINE('',#5006,#3968);+#5015=ORIENTED_EDGE('',*,*,#5016,.T.);+#5016=EDGE_CURVE('',#5012,#5017,#5019,.T.);+#5017=VERTEX_POINT('',#5018);+#5018=CARTESIAN_POINT('',(4.044081745177,-1.815,-2.22044604925E-16));+#5019=CIRCLE('',#5020,0.2);+#5020=AXIS2_PLACEMENT_3D('',#5021,#538,#3977);+#5021=CARTESIAN_POINT('',(4.044081745177,-1.815,0.2));+#5022=ORIENTED_EDGE('',*,*,#5023,.T.);+#5023=EDGE_CURVE('',#5017,#5024,#5026,.T.);+#5024=VERTEX_POINT('',#5025);+#5025=CARTESIAN_POINT('',(4.5,-1.815,-2.22044604925E-16));+#5026=LINE('',#5018,#49);+#5027=ORIENTED_EDGE('',*,*,#5028,.T.);+#5028=EDGE_CURVE('',#5024,#5029,#5031,.T.);+#5029=VERTEX_POINT('',#5030);+#5030=CARTESIAN_POINT('',(4.5,-1.815,1.E-01));+#5031=LINE('',#5025,#822);+#5032=ORIENTED_EDGE('',*,*,#5033,.T.);+#5033=EDGE_CURVE('',#5029,#5034,#5036,.T.);+#5034=VERTEX_POINT('',#5035);+#5035=CARTESIAN_POINT('',(4.044081745177,-1.815,1.E-01));+#5036=LINE('',#5030,#545);+#5037=ORIENTED_EDGE('',*,*,#5038,.T.);+#5038=EDGE_CURVE('',#5034,#5039,#5041,.T.);+#5039=VERTEX_POINT('',#5040);+#5040=CARTESIAN_POINT('',(3.945600969876,-1.815,0.182635182233));+#5041=CIRCLE('',#5042,1.E-01);+#5042=AXIS2_PLACEMENT_3D('',#5021,#231,#3999);+#5043=ORIENTED_EDGE('',*,*,#5044,.T.);+#5044=EDGE_CURVE('',#5039,#5045,#5047,.T.);+#5045=VERTEX_POINT('',#5046);+#5046=CARTESIAN_POINT('',(3.896961550602,-1.815,0.484729635533));+#5047=LINE('',#5040,#4005);+#5048=ORIENTED_EDGE('',*,*,#5049,.T.);+#5049=EDGE_CURVE('',#5045,#2480,#5050,.T.);+#5050=CIRCLE('',#5051,0.2);+#5051=AXIS2_PLACEMENT_3D('',#5009,#538,#4011);+#5052=ORIENTED_EDGE('',*,*,#2479,.T.);+#5053=PLANE('',#5054);+#5054=AXIS2_PLACEMENT_3D('',#5055,#538,#13);+#5055=CARTESIAN_POINT('',(3.912728288784,-1.815,0.307097536874));+#5056=ADVANCED_FACE('',(#5057),#5118,.T.);+#5057=FACE_BOUND('',#5058,.T.);+#5058=EDGE_LOOP('',(#5059,#5063,#5069,#5076,#5081,#5088,#5093,#5098,#5103,#5109,#5114,#2486));+#5059=ORIENTED_EDGE('',*,*,#5060,.F.);+#5060=EDGE_CURVE('',#4118,#2488,#5061,.T.);+#5061=LINE('',#5062,#822);+#5062=CARTESIAN_POINT('',(3.5,-2.185,0.478548768437));+#5063=ORIENTED_EDGE('',*,*,#5064,.T.);+#5064=EDGE_CURVE('',#4118,#5065,#5067,.T.);+#5065=VERTEX_POINT('',#5066);+#5066=CARTESIAN_POINT('',(3.7,-2.185,0.55));+#5067=LINE('',#5068,#49);+#5068=CARTESIAN_POINT('',(3.35,-2.185,0.55));+#5069=ORIENTED_EDGE('',*,*,#5070,.T.);+#5070=EDGE_CURVE('',#5065,#5071,#5073,.T.);+#5071=VERTEX_POINT('',#5072);+#5072=CARTESIAN_POINT('',(3.798480775301,-2.185,0.467364817767));+#5073=CIRCLE('',#5074,0.1);+#5074=AXIS2_PLACEMENT_3D('',#5075,#231,#3962);+#5075=CARTESIAN_POINT('',(3.7,-2.185,0.45));+#5076=ORIENTED_EDGE('',*,*,#5077,.T.);+#5077=EDGE_CURVE('',#5071,#5078,#5080,.T.);+#5078=VERTEX_POINT('',#5079);+#5079=CARTESIAN_POINT('',(3.847120194575,-2.185,0.165270364467));+#5080=LINE('',#5072,#3968);+#5081=ORIENTED_EDGE('',*,*,#5082,.T.);+#5082=EDGE_CURVE('',#5078,#5083,#5085,.T.);+#5083=VERTEX_POINT('',#5084);+#5084=CARTESIAN_POINT('',(4.044081745177,-2.185,-2.22044604925E-16));+#5085=CIRCLE('',#5086,0.2);+#5086=AXIS2_PLACEMENT_3D('',#5087,#538,#3977);+#5087=CARTESIAN_POINT('',(4.044081745177,-2.185,0.2));+#5088=ORIENTED_EDGE('',*,*,#5089,.T.);+#5089=EDGE_CURVE('',#5083,#5090,#5092,.T.);+#5090=VERTEX_POINT('',#5091);+#5091=CARTESIAN_POINT('',(4.5,-2.185,-2.22044604925E-16));+#5092=LINE('',#5084,#49);+#5093=ORIENTED_EDGE('',*,*,#5094,.T.);+#5094=EDGE_CURVE('',#5090,#5095,#5097,.T.);+#5095=VERTEX_POINT('',#5096);+#5096=CARTESIAN_POINT('',(4.5,-2.185,1.E-01));+#5097=LINE('',#5091,#822);+#5098=ORIENTED_EDGE('',*,*,#5099,.T.);+#5099=EDGE_CURVE('',#5095,#5100,#5102,.T.);+#5100=VERTEX_POINT('',#5101);+#5101=CARTESIAN_POINT('',(4.044081745177,-2.185,1.E-01));+#5102=LINE('',#5096,#545);+#5103=ORIENTED_EDGE('',*,*,#5104,.T.);+#5104=EDGE_CURVE('',#5100,#5105,#5107,.T.);+#5105=VERTEX_POINT('',#5106);+#5106=CARTESIAN_POINT('',(3.945600969876,-2.185,0.182635182233));+#5107=CIRCLE('',#5108,1.E-01);+#5108=AXIS2_PLACEMENT_3D('',#5087,#231,#3999);+#5109=ORIENTED_EDGE('',*,*,#5110,.T.);+#5110=EDGE_CURVE('',#5105,#5111,#5113,.T.);+#5111=VERTEX_POINT('',#5112);+#5112=CARTESIAN_POINT('',(3.896961550602,-2.185,0.484729635533));+#5113=LINE('',#5106,#4005);+#5114=ORIENTED_EDGE('',*,*,#5115,.T.);+#5115=EDGE_CURVE('',#5111,#2483,#5116,.T.);+#5116=CIRCLE('',#5117,0.2);+#5117=AXIS2_PLACEMENT_3D('',#5075,#538,#4011);+#5118=PLANE('',#5119);+#5119=AXIS2_PLACEMENT_3D('',#5120,#538,#13);+#5120=CARTESIAN_POINT('',(3.912728288784,-2.185,0.307097536874));+#5121=ADVANCED_FACE('',(#5122),#5129,.T.);+#5122=FACE_BOUND('',#5123,.F.);+#5123=EDGE_LOOP('',(#5124,#5114,#5127,#5128));+#5124=ORIENTED_EDGE('',*,*,#5125,.T.);+#5125=EDGE_CURVE('',#5045,#5111,#5126,.T.);+#5126=LINE('',#5046,#537);+#5127=ORIENTED_EDGE('',*,*,#2482,.F.);+#5128=ORIENTED_EDGE('',*,*,#5049,.F.);+#5129=CYLINDRICAL_SURFACE('',#5130,0.2);+#5130=AXIS2_PLACEMENT_3D('',#5009,#231,#4011);+#5131=ADVANCED_FACE('',(#5132),#2210,.F.);+#5132=FACE_BOUND('',#5133,.F.);+#5133=EDGE_LOOP('',(#5059,#5134,#5135,#5139));+#5134=ORIENTED_EDGE('',*,*,#4117,.T.);+#5135=ORIENTED_EDGE('',*,*,#5136,.T.);+#5136=EDGE_CURVE('',#4114,#2503,#5137,.T.);+#5137=LINE('',#5138,#822);+#5138=CARTESIAN_POINT('',(3.5,-2.615,0.478548768437));+#5139=ORIENTED_EDGE('',*,*,#2502,.F.);+#5140=ADVANCED_FACE('',(#5141),#5200,.F.);+#5141=FACE_BOUND('',#5142,.F.);+#5142=EDGE_LOOP('',(#5143,#5144,#5150,#5157,#5162,#5169,#5174,#5179,#5184,#5190,#5195,#5199));+#5143=ORIENTED_EDGE('',*,*,#5136,.F.);+#5144=ORIENTED_EDGE('',*,*,#5145,.T.);+#5145=EDGE_CURVE('',#4114,#5146,#5148,.T.);+#5146=VERTEX_POINT('',#5147);+#5147=CARTESIAN_POINT('',(3.7,-2.615,0.55));+#5148=LINE('',#5149,#49);+#5149=CARTESIAN_POINT('',(3.35,-2.615,0.55));+#5150=ORIENTED_EDGE('',*,*,#5151,.T.);+#5151=EDGE_CURVE('',#5146,#5152,#5154,.T.);+#5152=VERTEX_POINT('',#5153);+#5153=CARTESIAN_POINT('',(3.798480775301,-2.615,0.467364817767));+#5154=CIRCLE('',#5155,0.1);+#5155=AXIS2_PLACEMENT_3D('',#5156,#231,#3962);+#5156=CARTESIAN_POINT('',(3.7,-2.615,0.45));+#5157=ORIENTED_EDGE('',*,*,#5158,.T.);+#5158=EDGE_CURVE('',#5152,#5159,#5161,.T.);+#5159=VERTEX_POINT('',#5160);+#5160=CARTESIAN_POINT('',(3.847120194575,-2.615,0.165270364467));+#5161=LINE('',#5153,#3968);+#5162=ORIENTED_EDGE('',*,*,#5163,.T.);+#5163=EDGE_CURVE('',#5159,#5164,#5166,.T.);+#5164=VERTEX_POINT('',#5165);+#5165=CARTESIAN_POINT('',(4.044081745177,-2.615,-2.22044604925E-16));+#5166=CIRCLE('',#5167,0.2);+#5167=AXIS2_PLACEMENT_3D('',#5168,#538,#3977);+#5168=CARTESIAN_POINT('',(4.044081745177,-2.615,0.2));+#5169=ORIENTED_EDGE('',*,*,#5170,.T.);+#5170=EDGE_CURVE('',#5164,#5171,#5173,.T.);+#5171=VERTEX_POINT('',#5172);+#5172=CARTESIAN_POINT('',(4.5,-2.615,-2.22044604925E-16));+#5173=LINE('',#5165,#49);+#5174=ORIENTED_EDGE('',*,*,#5175,.T.);+#5175=EDGE_CURVE('',#5171,#5176,#5178,.T.);+#5176=VERTEX_POINT('',#5177);+#5177=CARTESIAN_POINT('',(4.5,-2.615,1.E-01));+#5178=LINE('',#5172,#822);+#5179=ORIENTED_EDGE('',*,*,#5180,.T.);+#5180=EDGE_CURVE('',#5176,#5181,#5183,.T.);+#5181=VERTEX_POINT('',#5182);+#5182=CARTESIAN_POINT('',(4.044081745177,-2.615,1.E-01));+#5183=LINE('',#5177,#545);+#5184=ORIENTED_EDGE('',*,*,#5185,.T.);+#5185=EDGE_CURVE('',#5181,#5186,#5188,.T.);+#5186=VERTEX_POINT('',#5187);+#5187=CARTESIAN_POINT('',(3.945600969876,-2.615,0.182635182233));+#5188=CIRCLE('',#5189,1.E-01);+#5189=AXIS2_PLACEMENT_3D('',#5168,#231,#3999);+#5190=ORIENTED_EDGE('',*,*,#5191,.T.);+#5191=EDGE_CURVE('',#5186,#5192,#5194,.T.);+#5192=VERTEX_POINT('',#5193);+#5193=CARTESIAN_POINT('',(3.896961550602,-2.615,0.484729635533));+#5194=LINE('',#5187,#4005);+#5195=ORIENTED_EDGE('',*,*,#5196,.T.);+#5196=EDGE_CURVE('',#5192,#2515,#5197,.T.);+#5197=CIRCLE('',#5198,0.2);+#5198=AXIS2_PLACEMENT_3D('',#5156,#538,#4011);+#5199=ORIENTED_EDGE('',*,*,#2514,.T.);+#5200=PLANE('',#5201);+#5201=AXIS2_PLACEMENT_3D('',#5202,#538,#13);+#5202=CARTESIAN_POINT('',(3.912728288784,-2.615,0.307097536874));+#5203=ADVANCED_FACE('',(#5204),#5265,.T.);+#5204=FACE_BOUND('',#5205,.T.);+#5205=EDGE_LOOP('',(#5206,#5210,#5216,#5223,#5228,#5235,#5240,#5245,#5250,#5256,#5261,#2521));+#5206=ORIENTED_EDGE('',*,*,#5207,.F.);+#5207=EDGE_CURVE('',#4110,#2523,#5208,.T.);+#5208=LINE('',#5209,#822);+#5209=CARTESIAN_POINT('',(3.5,-2.985,0.478548768437));+#5210=ORIENTED_EDGE('',*,*,#5211,.T.);+#5211=EDGE_CURVE('',#4110,#5212,#5214,.T.);+#5212=VERTEX_POINT('',#5213);+#5213=CARTESIAN_POINT('',(3.7,-2.985,0.55));+#5214=LINE('',#5215,#49);+#5215=CARTESIAN_POINT('',(3.35,-2.985,0.55));+#5216=ORIENTED_EDGE('',*,*,#5217,.T.);+#5217=EDGE_CURVE('',#5212,#5218,#5220,.T.);+#5218=VERTEX_POINT('',#5219);+#5219=CARTESIAN_POINT('',(3.798480775301,-2.985,0.467364817767));+#5220=CIRCLE('',#5221,0.1);+#5221=AXIS2_PLACEMENT_3D('',#5222,#231,#3962);+#5222=CARTESIAN_POINT('',(3.7,-2.985,0.45));+#5223=ORIENTED_EDGE('',*,*,#5224,.T.);+#5224=EDGE_CURVE('',#5218,#5225,#5227,.T.);+#5225=VERTEX_POINT('',#5226);+#5226=CARTESIAN_POINT('',(3.847120194575,-2.985,0.165270364467));+#5227=LINE('',#5219,#3968);+#5228=ORIENTED_EDGE('',*,*,#5229,.T.);+#5229=EDGE_CURVE('',#5225,#5230,#5232,.T.);+#5230=VERTEX_POINT('',#5231);+#5231=CARTESIAN_POINT('',(4.044081745177,-2.985,-2.22044604925E-16));+#5232=CIRCLE('',#5233,0.2);+#5233=AXIS2_PLACEMENT_3D('',#5234,#538,#3977);+#5234=CARTESIAN_POINT('',(4.044081745177,-2.985,0.2));+#5235=ORIENTED_EDGE('',*,*,#5236,.T.);+#5236=EDGE_CURVE('',#5230,#5237,#5239,.T.);+#5237=VERTEX_POINT('',#5238);+#5238=CARTESIAN_POINT('',(4.5,-2.985,-2.22044604925E-16));+#5239=LINE('',#5231,#49);+#5240=ORIENTED_EDGE('',*,*,#5241,.T.);+#5241=EDGE_CURVE('',#5237,#5242,#5244,.T.);+#5242=VERTEX_POINT('',#5243);+#5243=CARTESIAN_POINT('',(4.5,-2.985,1.E-01));+#5244=LINE('',#5238,#822);+#5245=ORIENTED_EDGE('',*,*,#5246,.T.);+#5246=EDGE_CURVE('',#5242,#5247,#5249,.T.);+#5247=VERTEX_POINT('',#5248);+#5248=CARTESIAN_POINT('',(4.044081745177,-2.985,1.E-01));+#5249=LINE('',#5243,#545);+#5250=ORIENTED_EDGE('',*,*,#5251,.T.);+#5251=EDGE_CURVE('',#5247,#5252,#5254,.T.);+#5252=VERTEX_POINT('',#5253);+#5253=CARTESIAN_POINT('',(3.945600969876,-2.985,0.182635182233));+#5254=CIRCLE('',#5255,1.E-01);+#5255=AXIS2_PLACEMENT_3D('',#5234,#231,#3999);+#5256=ORIENTED_EDGE('',*,*,#5257,.T.);+#5257=EDGE_CURVE('',#5252,#5258,#5260,.T.);+#5258=VERTEX_POINT('',#5259);+#5259=CARTESIAN_POINT('',(3.896961550602,-2.985,0.484729635533));+#5260=LINE('',#5253,#4005);+#5261=ORIENTED_EDGE('',*,*,#5262,.T.);+#5262=EDGE_CURVE('',#5258,#2518,#5263,.T.);+#5263=CIRCLE('',#5264,0.2);+#5264=AXIS2_PLACEMENT_3D('',#5222,#538,#4011);+#5265=PLANE('',#5266);+#5266=AXIS2_PLACEMENT_3D('',#5267,#538,#13);+#5267=CARTESIAN_POINT('',(3.912728288784,-2.985,0.307097536874));+#5268=ADVANCED_FACE('',(#5269),#5276,.T.);+#5269=FACE_BOUND('',#5270,.F.);+#5270=EDGE_LOOP('',(#5271,#5261,#5274,#5275));+#5271=ORIENTED_EDGE('',*,*,#5272,.T.);+#5272=EDGE_CURVE('',#5192,#5258,#5273,.T.);+#5273=LINE('',#5193,#537);+#5274=ORIENTED_EDGE('',*,*,#2517,.F.);+#5275=ORIENTED_EDGE('',*,*,#5196,.F.);+#5276=CYLINDRICAL_SURFACE('',#5277,0.2);+#5277=AXIS2_PLACEMENT_3D('',#5156,#231,#4011);+#5278=ADVANCED_FACE('',(#5279),#5300,.F.);+#5279=FACE_BOUND('',#5280,.F.);+#5280=EDGE_LOOP('',(#5281,#5284,#5291,#5296,#5298,#5299));+#5281=ORIENTED_EDGE('',*,*,#5282,.F.);+#5282=EDGE_CURVE('',#5283,#2547,#2554,.T.);+#5283=VERTEX_POINT('',#2555);+#5284=ORIENTED_EDGE('',*,*,#5285,.T.);+#5285=EDGE_CURVE('',#5283,#5286,#5288,.T.);+#5286=VERTEX_POINT('',#5287);+#5287=CARTESIAN_POINT('',(2.615,-3.7,0.65));+#5288=LINE('',#2555,#5289);+#5289=VECTOR('',#5290,1.);+#5290=DIRECTION('',(-1.,1.110223024625E-16,0.));+#5291=ORIENTED_EDGE('',*,*,#5292,.T.);+#5292=EDGE_CURVE('',#5286,#5293,#5295,.T.);+#5293=VERTEX_POINT('',#5294);+#5294=CARTESIAN_POINT('',(2.615,-3.5,0.65));+#5295=LINE('',#5287,#2556);+#5296=ORIENTED_EDGE('',*,*,#5297,.T.);+#5297=EDGE_CURVE('',#5293,#4191,#5295,.T.);+#5298=ORIENTED_EDGE('',*,*,#4190,.F.);+#5299=ORIENTED_EDGE('',*,*,#2551,.F.);+#5300=PLANE('',#5301);+#5301=AXIS2_PLACEMENT_3D('',#2555,#273,#2557);+#5302=ADVANCED_FACE('',(#5303),#5320,.F.);+#5303=FACE_BOUND('',#5304,.F.);+#5304=EDGE_LOOP('',(#5305,#5310,#5315,#5319));+#5305=ORIENTED_EDGE('',*,*,#5306,.F.);+#5306=EDGE_CURVE('',#5307,#2542,#5309,.T.);+#5307=VERTEX_POINT('',#5308);+#5308=CARTESIAN_POINT('',(3.325,-3.5,0.55));+#5309=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5308,#2543),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5310=ORIENTED_EDGE('',*,*,#5311,.T.);+#5311=EDGE_CURVE('',#5307,#5312,#5314,.T.);+#5312=VERTEX_POINT('',#5313);+#5313=CARTESIAN_POINT('',(2.985,-3.5,0.55));+#5314=LINE('',#5308,#545);+#5315=ORIENTED_EDGE('',*,*,#5316,.T.);+#5316=EDGE_CURVE('',#5312,#2547,#5317,.T.);+#5317=LINE('',#5318,#822);+#5318=CARTESIAN_POINT('',(2.985,-3.5,0.478548768437));+#5319=ORIENTED_EDGE('',*,*,#2546,.F.);+#5320=PLANE('',#5321);+#5321=AXIS2_PLACEMENT_3D('',#2543,#231,#546);+#5322=ADVANCED_FACE('',(#5323),#5333,.F.);+#5323=FACE_BOUND('',#5324,.F.);+#5324=EDGE_LOOP('',(#5325,#5328,#5329,#5330));+#5325=ORIENTED_EDGE('',*,*,#5326,.T.);+#5326=EDGE_CURVE('',#4105,#5307,#5327,.T.);+#5327=LINE('',#4106,#2258);+#5328=ORIENTED_EDGE('',*,*,#5306,.T.);+#5329=ORIENTED_EDGE('',*,*,#2541,.F.);+#5330=ORIENTED_EDGE('',*,*,#5331,.F.);+#5331=EDGE_CURVE('',#4105,#2538,#5332,.T.);+#5332=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4106,#2539),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5333=PLANE('',#5334);+#5334=AXIS2_PLACEMENT_3D('',#2539,#2954,#2227);+#5335=ADVANCED_FACE('',(#5336),#2210,.F.);+#5336=FACE_BOUND('',#5337,.F.);+#5337=EDGE_LOOP('',(#5206,#5338,#5339,#5340));+#5338=ORIENTED_EDGE('',*,*,#4109,.T.);+#5339=ORIENTED_EDGE('',*,*,#5331,.T.);+#5340=ORIENTED_EDGE('',*,*,#2537,.F.);+#5341=ADVANCED_FACE('',(#5342),#5357,.F.);+#5342=FACE_BOUND('',#5343,.T.);+#5343=EDGE_LOOP('',(#3212,#4176,#4096,#5344,#5349,#5354,#2771,#2678));+#5344=ORIENTED_EDGE('',*,*,#5345,.T.);+#5345=EDGE_CURVE('',#4100,#5346,#5348,.T.);+#5346=VERTEX_POINT('',#5347);+#5347=CARTESIAN_POINT('',(3.277174773624,-3.404349547248,0.1));+#5348=LINE('',#4101,#2258);+#5349=ORIENTED_EDGE('',*,*,#5350,.T.);+#5350=EDGE_CURVE('',#5346,#5351,#5353,.T.);+#5351=VERTEX_POINT('',#5352);+#5352=CARTESIAN_POINT('',(-3.277174773624,-3.404349547248,0.1));+#5353=LINE('',#5347,#545);+#5354=ORIENTED_EDGE('',*,*,#5355,.T.);+#5355=EDGE_CURVE('',#5351,#2773,#5356,.T.);+#5356=LINE('',#5352,#2953);+#5357=PLANE('',#5358);+#5358=AXIS2_PLACEMENT_3D('',#2683,#13,#5359);+#5359=DIRECTION('',(0.693522239557,-0.720435217934,0.));+#5360=ADVANCED_FACE('',(#5361),#5368,.F.);+#5361=FACE_BOUND('',#5362,.F.);+#5362=EDGE_LOOP('',(#5363,#2752,#5366,#5367));+#5363=ORIENTED_EDGE('',*,*,#5364,.T.);+#5364=EDGE_CURVE('',#2894,#2746,#5365,.T.);+#5365=LINE('',#2895,#845);+#5366=ORIENTED_EDGE('',*,*,#2928,.F.);+#5367=ORIENTED_EDGE('',*,*,#2899,.F.);+#5368=PLANE('',#5369);+#5369=AXIS2_PLACEMENT_3D('',#2895,#5370,#2758);+#5370=DIRECTION('',(0.987285005229,-1.129688768275E-17,-0.158960115908));+#5371=ADVANCED_FACE('',(#5372),#5379,.F.);+#5372=FACE_BOUND('',#5373,.F.);+#5373=EDGE_LOOP('',(#5374,#2744,#5377,#5378));+#5374=ORIENTED_EDGE('',*,*,#5375,.T.);+#5375=EDGE_CURVE('',#2889,#2741,#5376,.T.);+#5376=LINE('',#2890,#845);+#5377=ORIENTED_EDGE('',*,*,#5364,.F.);+#5378=ORIENTED_EDGE('',*,*,#2893,.F.);+#5379=CYLINDRICAL_SURFACE('',#5380,1.E-01);+#5380=AXIS2_PLACEMENT_3D('',#2876,#2934,#2751);+#5381=ADVANCED_FACE('',(#5382),#5389,.F.);+#5382=FACE_BOUND('',#5383,.F.);+#5383=EDGE_LOOP('',(#5384,#2739,#5387,#5388));+#5384=ORIENTED_EDGE('',*,*,#5385,.T.);+#5385=EDGE_CURVE('',#2884,#2736,#5386,.T.);+#5386=LINE('',#2885,#845);+#5387=ORIENTED_EDGE('',*,*,#5375,.F.);+#5388=ORIENTED_EDGE('',*,*,#2888,.F.);+#5389=PLANE('',#5390);+#5390=AXIS2_PLACEMENT_3D('',#2885,#273,#239);+#5391=ADVANCED_FACE('',(#5392),#5399,.F.);+#5392=FACE_BOUND('',#5393,.F.);+#5393=EDGE_LOOP('',(#5394,#2734,#5397,#5398));+#5394=ORIENTED_EDGE('',*,*,#5395,.T.);+#5395=EDGE_CURVE('',#2879,#2731,#5396,.T.);+#5396=LINE('',#2880,#845);+#5397=ORIENTED_EDGE('',*,*,#5385,.F.);+#5398=ORIENTED_EDGE('',*,*,#2883,.F.);+#5399=PLANE('',#5400);+#5400=AXIS2_PLACEMENT_3D('',#2880,#239,#13);+#5401=ADVANCED_FACE('',(#5402),#5409,.F.);+#5402=FACE_BOUND('',#5403,.F.);+#5403=EDGE_LOOP('',(#5404,#2729,#5407,#5408));+#5404=ORIENTED_EDGE('',*,*,#5405,.T.);+#5405=EDGE_CURVE('',#2872,#2722,#5406,.T.);+#5406=LINE('',#2873,#845);+#5407=ORIENTED_EDGE('',*,*,#5395,.F.);+#5408=ORIENTED_EDGE('',*,*,#2878,.F.);+#5409=PLANE('',#5410);+#5410=AXIS2_PLACEMENT_3D('',#2873,#13,#2703);+#5411=ADVANCED_FACE('',(#5412),#5419,.T.);+#5412=FACE_BOUND('',#5413,.F.);+#5413=EDGE_LOOP('',(#5414,#2720,#5417,#5418));+#5414=ORIENTED_EDGE('',*,*,#5415,.T.);+#5415=EDGE_CURVE('',#2867,#2715,#5416,.T.);+#5416=LINE('',#2868,#845);+#5417=ORIENTED_EDGE('',*,*,#5405,.F.);+#5418=ORIENTED_EDGE('',*,*,#2871,.F.);+#5419=CYLINDRICAL_SURFACE('',#5420,0.2);+#5420=AXIS2_PLACEMENT_3D('',#2876,#2934,#2728);+#5421=ADVANCED_FACE('',(#5422),#5429,.F.);+#5422=FACE_BOUND('',#5423,.F.);+#5423=EDGE_LOOP('',(#5424,#2713,#5427,#5428));+#5424=ORIENTED_EDGE('',*,*,#5425,.T.);+#5425=EDGE_CURVE('',#2860,#2706,#5426,.T.);+#5426=LINE('',#2861,#845);+#5427=ORIENTED_EDGE('',*,*,#5415,.F.);+#5428=ORIENTED_EDGE('',*,*,#2866,.F.);+#5429=PLANE('',#5430);+#5430=AXIS2_PLACEMENT_3D('',#2861,#5431,#2719);+#5431=DIRECTION('',(-0.987285005229,1.129688768275E-17,0.158960115908));+#5432=ADVANCED_FACE('',(#5433),#5440,.F.);+#5433=FACE_BOUND('',#5434,.F.);+#5434=EDGE_LOOP('',(#5435,#2704,#5438,#5439));+#5435=ORIENTED_EDGE('',*,*,#5436,.T.);+#5436=EDGE_CURVE('',#2854,#2698,#5437,.T.);+#5437=LINE('',#2855,#845);+#5438=ORIENTED_EDGE('',*,*,#5425,.F.);+#5439=ORIENTED_EDGE('',*,*,#2859,.F.);+#5440=CYLINDRICAL_SURFACE('',#5441,0.1);+#5441=AXIS2_PLACEMENT_3D('',#2864,#2934,#2712);+#5442=ADVANCED_FACE('',(#5443),#5448,.F.);+#5443=FACE_BOUND('',#5444,.F.);+#5444=EDGE_LOOP('',(#5445,#5446,#2696,#5447));+#5445=ORIENTED_EDGE('',*,*,#2853,.F.);+#5446=ORIENTED_EDGE('',*,*,#2779,.T.);+#5447=ORIENTED_EDGE('',*,*,#5436,.F.);+#5448=PLANE('',#5449);+#5449=AXIS2_PLACEMENT_3D('',#2857,#13,#2703);+#5450=ADVANCED_FACE('',(#5451),#829,.F.);+#5451=FACE_BOUND('',#5452,.F.);+#5452=EDGE_LOOP('',(#5453,#5456,#5457,#5461));+#5453=ORIENTED_EDGE('',*,*,#5454,.F.);+#5454=EDGE_CURVE('',#2840,#2940,#5455,.T.);+#5455=B_SPLINE_CURVE_WITH_KNOTS('',1,(#826,#243),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5456=ORIENTED_EDGE('',*,*,#2839,.T.);+#5457=ORIENTED_EDGE('',*,*,#5458,.T.);+#5458=EDGE_CURVE('',#2836,#2941,#5459,.T.);+#5459=LINE('',#5460,#822);+#5460=CARTESIAN_POINT('',(-3.5,-2.985,0.478548768437));+#5461=ORIENTED_EDGE('',*,*,#2939,.F.);+#5462=ADVANCED_FACE('',(#5463),#5481,.F.);+#5463=FACE_BOUND('',#5464,.F.);+#5464=EDGE_LOOP('',(#5465,#5471,#5472,#5478));+#5465=ORIENTED_EDGE('',*,*,#5466,.F.);+#5466=EDGE_CURVE('',#2836,#5467,#5469,.T.);+#5467=VERTEX_POINT('',#5468);+#5468=CARTESIAN_POINT('',(-3.7,-2.985,0.55));+#5469=LINE('',#5470,#2702);+#5470=CARTESIAN_POINT('',(-3.35,-2.985,0.55));+#5471=ORIENTED_EDGE('',*,*,#2835,.T.);+#5472=ORIENTED_EDGE('',*,*,#5473,.T.);+#5473=EDGE_CURVE('',#2832,#5474,#5476,.T.);+#5474=VERTEX_POINT('',#5475);+#5475=CARTESIAN_POINT('',(-3.7,-2.615,0.55));+#5476=LINE('',#5477,#2702);+#5477=CARTESIAN_POINT('',(-3.35,-2.615,0.55));+#5478=ORIENTED_EDGE('',*,*,#5479,.F.);+#5479=EDGE_CURVE('',#5467,#5474,#5480,.T.);+#5480=LINE('',#5468,#845);+#5481=PLANE('',#5482);+#5482=AXIS2_PLACEMENT_3D('',#5470,#13,#2703);+#5483=ADVANCED_FACE('',(#5484),#829,.F.);+#5484=FACE_BOUND('',#5485,.F.);+#5485=EDGE_LOOP('',(#5486,#5490,#5491,#5495));+#5486=ORIENTED_EDGE('',*,*,#5487,.F.);+#5487=EDGE_CURVE('',#2832,#2985,#5488,.T.);+#5488=LINE('',#5489,#822);+#5489=CARTESIAN_POINT('',(-3.5,-2.615,0.478548768437));+#5490=ORIENTED_EDGE('',*,*,#2831,.T.);+#5491=ORIENTED_EDGE('',*,*,#5492,.T.);+#5492=EDGE_CURVE('',#2828,#2999,#5493,.T.);+#5493=LINE('',#5494,#822);+#5494=CARTESIAN_POINT('',(-3.5,-2.185,0.478548768437));+#5495=ORIENTED_EDGE('',*,*,#2998,.F.);+#5496=ADVANCED_FACE('',(#5497),#5515,.F.);+#5497=FACE_BOUND('',#5498,.F.);+#5498=EDGE_LOOP('',(#5499,#5505,#5506,#5512));+#5499=ORIENTED_EDGE('',*,*,#5500,.F.);+#5500=EDGE_CURVE('',#2828,#5501,#5503,.T.);+#5501=VERTEX_POINT('',#5502);+#5502=CARTESIAN_POINT('',(-3.7,-2.185,0.55));+#5503=LINE('',#5504,#2702);+#5504=CARTESIAN_POINT('',(-3.35,-2.185,0.55));+#5505=ORIENTED_EDGE('',*,*,#2827,.T.);+#5506=ORIENTED_EDGE('',*,*,#5507,.T.);+#5507=EDGE_CURVE('',#2824,#5508,#5510,.T.);+#5508=VERTEX_POINT('',#5509);+#5509=CARTESIAN_POINT('',(-3.7,-1.815,0.55));+#5510=LINE('',#5511,#2702);+#5511=CARTESIAN_POINT('',(-3.35,-1.815,0.55));+#5512=ORIENTED_EDGE('',*,*,#5513,.F.);+#5513=EDGE_CURVE('',#5501,#5508,#5514,.T.);+#5514=LINE('',#5502,#845);+#5515=PLANE('',#5516);+#5516=AXIS2_PLACEMENT_3D('',#5504,#13,#2703);+#5517=ADVANCED_FACE('',(#5518),#829,.F.);+#5518=FACE_BOUND('',#5519,.F.);+#5519=EDGE_LOOP('',(#5520,#5524,#5525,#5529));+#5520=ORIENTED_EDGE('',*,*,#5521,.F.);+#5521=EDGE_CURVE('',#2824,#3020,#5522,.T.);+#5522=LINE('',#5523,#822);+#5523=CARTESIAN_POINT('',(-3.5,-1.815,0.478548768437));+#5524=ORIENTED_EDGE('',*,*,#2823,.T.);+#5525=ORIENTED_EDGE('',*,*,#5526,.T.);+#5526=EDGE_CURVE('',#2820,#3034,#5527,.T.);+#5527=LINE('',#5528,#822);+#5528=CARTESIAN_POINT('',(-3.5,-1.385,0.478548768437));+#5529=ORIENTED_EDGE('',*,*,#3033,.F.);+#5530=ADVANCED_FACE('',(#5531),#5549,.F.);+#5531=FACE_BOUND('',#5532,.F.);+#5532=EDGE_LOOP('',(#5533,#5539,#5540,#5546));+#5533=ORIENTED_EDGE('',*,*,#5534,.F.);+#5534=EDGE_CURVE('',#2820,#5535,#5537,.T.);+#5535=VERTEX_POINT('',#5536);+#5536=CARTESIAN_POINT('',(-3.7,-1.385,0.55));+#5537=LINE('',#5538,#2702);+#5538=CARTESIAN_POINT('',(-3.35,-1.385,0.55));+#5539=ORIENTED_EDGE('',*,*,#2819,.T.);+#5540=ORIENTED_EDGE('',*,*,#5541,.T.);+#5541=EDGE_CURVE('',#2816,#5542,#5544,.T.);+#5542=VERTEX_POINT('',#5543);+#5543=CARTESIAN_POINT('',(-3.7,-1.015,0.55));+#5544=LINE('',#5545,#2702);+#5545=CARTESIAN_POINT('',(-3.35,-1.015,0.55));+#5546=ORIENTED_EDGE('',*,*,#5547,.F.);+#5547=EDGE_CURVE('',#5535,#5542,#5548,.T.);+#5548=LINE('',#5536,#845);+#5549=PLANE('',#5550);+#5550=AXIS2_PLACEMENT_3D('',#5538,#13,#2703);+#5551=ADVANCED_FACE('',(#5552),#829,.F.);+#5552=FACE_BOUND('',#5553,.F.);+#5553=EDGE_LOOP('',(#5554,#5558,#5559,#5563));+#5554=ORIENTED_EDGE('',*,*,#5555,.F.);+#5555=EDGE_CURVE('',#2816,#3055,#5556,.T.);+#5556=LINE('',#5557,#822);+#5557=CARTESIAN_POINT('',(-3.5,-1.015,0.478548768437));+#5558=ORIENTED_EDGE('',*,*,#2815,.T.);+#5559=ORIENTED_EDGE('',*,*,#5560,.T.);+#5560=EDGE_CURVE('',#2812,#3069,#5561,.T.);+#5561=LINE('',#5562,#822);+#5562=CARTESIAN_POINT('',(-3.5,-0.585,0.478548768437));+#5563=ORIENTED_EDGE('',*,*,#3068,.F.);+#5564=ADVANCED_FACE('',(#5565),#5583,.F.);+#5565=FACE_BOUND('',#5566,.F.);+#5566=EDGE_LOOP('',(#5567,#5573,#5574,#5580));+#5567=ORIENTED_EDGE('',*,*,#5568,.F.);+#5568=EDGE_CURVE('',#2812,#5569,#5571,.T.);+#5569=VERTEX_POINT('',#5570);+#5570=CARTESIAN_POINT('',(-3.7,-0.585,0.55));+#5571=LINE('',#5572,#2702);+#5572=CARTESIAN_POINT('',(-3.35,-0.585,0.55));+#5573=ORIENTED_EDGE('',*,*,#2811,.T.);+#5574=ORIENTED_EDGE('',*,*,#5575,.T.);+#5575=EDGE_CURVE('',#2808,#5576,#5578,.T.);+#5576=VERTEX_POINT('',#5577);+#5577=CARTESIAN_POINT('',(-3.7,-0.215,0.55));+#5578=LINE('',#5579,#2702);+#5579=CARTESIAN_POINT('',(-3.35,-0.215,0.55));+#5580=ORIENTED_EDGE('',*,*,#5581,.F.);+#5581=EDGE_CURVE('',#5569,#5576,#5582,.T.);+#5582=LINE('',#5570,#845);+#5583=PLANE('',#5584);+#5584=AXIS2_PLACEMENT_3D('',#5572,#13,#2703);+#5585=ADVANCED_FACE('',(#5586),#829,.F.);+#5586=FACE_BOUND('',#5587,.F.);+#5587=EDGE_LOOP('',(#5588,#5592,#5593,#5597));+#5588=ORIENTED_EDGE('',*,*,#5589,.F.);+#5589=EDGE_CURVE('',#2808,#3090,#5590,.T.);+#5590=LINE('',#5591,#822);+#5591=CARTESIAN_POINT('',(-3.5,-0.215,0.478548768437));+#5592=ORIENTED_EDGE('',*,*,#2807,.T.);+#5593=ORIENTED_EDGE('',*,*,#5594,.T.);+#5594=EDGE_CURVE('',#2804,#3104,#5595,.T.);+#5595=LINE('',#5596,#822);+#5596=CARTESIAN_POINT('',(-3.5,0.215,0.478548768437));+#5597=ORIENTED_EDGE('',*,*,#3103,.F.);+#5598=ADVANCED_FACE('',(#5599),#5617,.F.);+#5599=FACE_BOUND('',#5600,.F.);+#5600=EDGE_LOOP('',(#5601,#5607,#5608,#5614));+#5601=ORIENTED_EDGE('',*,*,#5602,.F.);+#5602=EDGE_CURVE('',#2804,#5603,#5605,.T.);+#5603=VERTEX_POINT('',#5604);+#5604=CARTESIAN_POINT('',(-3.7,0.215,0.55));+#5605=LINE('',#5606,#2702);+#5606=CARTESIAN_POINT('',(-3.35,0.215,0.55));+#5607=ORIENTED_EDGE('',*,*,#2803,.T.);+#5608=ORIENTED_EDGE('',*,*,#5609,.T.);+#5609=EDGE_CURVE('',#2800,#5610,#5612,.T.);+#5610=VERTEX_POINT('',#5611);+#5611=CARTESIAN_POINT('',(-3.7,0.585,0.55));+#5612=LINE('',#5613,#2702);+#5613=CARTESIAN_POINT('',(-3.35,0.585,0.55));+#5614=ORIENTED_EDGE('',*,*,#5615,.F.);+#5615=EDGE_CURVE('',#5603,#5610,#5616,.T.);+#5616=LINE('',#5604,#845);+#5617=PLANE('',#5618);+#5618=AXIS2_PLACEMENT_3D('',#5606,#13,#2703);+#5619=ADVANCED_FACE('',(#5620),#829,.F.);+#5620=FACE_BOUND('',#5621,.F.);+#5621=EDGE_LOOP('',(#5622,#5626,#5627,#5631));+#5622=ORIENTED_EDGE('',*,*,#5623,.F.);+#5623=EDGE_CURVE('',#2800,#3125,#5624,.T.);+#5624=LINE('',#5625,#822);+#5625=CARTESIAN_POINT('',(-3.5,0.585,0.478548768437));+#5626=ORIENTED_EDGE('',*,*,#2799,.T.);+#5627=ORIENTED_EDGE('',*,*,#5628,.T.);+#5628=EDGE_CURVE('',#2796,#3139,#5629,.T.);+#5629=LINE('',#5630,#822);+#5630=CARTESIAN_POINT('',(-3.5,1.015,0.478548768437));+#5631=ORIENTED_EDGE('',*,*,#3138,.F.);+#5632=ADVANCED_FACE('',(#5633),#5651,.F.);+#5633=FACE_BOUND('',#5634,.F.);+#5634=EDGE_LOOP('',(#5635,#5641,#5642,#5648));+#5635=ORIENTED_EDGE('',*,*,#5636,.F.);+#5636=EDGE_CURVE('',#2796,#5637,#5639,.T.);+#5637=VERTEX_POINT('',#5638);+#5638=CARTESIAN_POINT('',(-3.7,1.015,0.55));+#5639=LINE('',#5640,#2702);+#5640=CARTESIAN_POINT('',(-3.35,1.015,0.55));+#5641=ORIENTED_EDGE('',*,*,#2795,.T.);+#5642=ORIENTED_EDGE('',*,*,#5643,.T.);+#5643=EDGE_CURVE('',#2792,#5644,#5646,.T.);+#5644=VERTEX_POINT('',#5645);+#5645=CARTESIAN_POINT('',(-3.7,1.385,0.55));+#5646=LINE('',#5647,#2702);+#5647=CARTESIAN_POINT('',(-3.35,1.385,0.55));+#5648=ORIENTED_EDGE('',*,*,#5649,.F.);+#5649=EDGE_CURVE('',#5637,#5644,#5650,.T.);+#5650=LINE('',#5638,#845);+#5651=PLANE('',#5652);+#5652=AXIS2_PLACEMENT_3D('',#5640,#13,#2703);+#5653=ADVANCED_FACE('',(#5654),#829,.F.);+#5654=FACE_BOUND('',#5655,.F.);+#5655=EDGE_LOOP('',(#5656,#5660,#5661,#5665));+#5656=ORIENTED_EDGE('',*,*,#5657,.F.);+#5657=EDGE_CURVE('',#2792,#3160,#5658,.T.);+#5658=LINE('',#5659,#822);+#5659=CARTESIAN_POINT('',(-3.5,1.385,0.478548768437));+#5660=ORIENTED_EDGE('',*,*,#2791,.T.);+#5661=ORIENTED_EDGE('',*,*,#5662,.T.);+#5662=EDGE_CURVE('',#2788,#3174,#5663,.T.);+#5663=LINE('',#5664,#822);+#5664=CARTESIAN_POINT('',(-3.5,1.815,0.478548768437));+#5665=ORIENTED_EDGE('',*,*,#3173,.F.);+#5666=ADVANCED_FACE('',(#5667),#5685,.F.);+#5667=FACE_BOUND('',#5668,.F.);+#5668=EDGE_LOOP('',(#5669,#5675,#5676,#5682));+#5669=ORIENTED_EDGE('',*,*,#5670,.F.);+#5670=EDGE_CURVE('',#2788,#5671,#5673,.T.);+#5671=VERTEX_POINT('',#5672);+#5672=CARTESIAN_POINT('',(-3.7,1.815,0.55));+#5673=LINE('',#5674,#2702);+#5674=CARTESIAN_POINT('',(-3.35,1.815,0.55));+#5675=ORIENTED_EDGE('',*,*,#2787,.T.);+#5676=ORIENTED_EDGE('',*,*,#5677,.T.);+#5677=EDGE_CURVE('',#2784,#5678,#5680,.T.);+#5678=VERTEX_POINT('',#5679);+#5679=CARTESIAN_POINT('',(-3.7,2.185,0.55));+#5680=LINE('',#5681,#2702);+#5681=CARTESIAN_POINT('',(-3.35,2.185,0.55));+#5682=ORIENTED_EDGE('',*,*,#5683,.F.);+#5683=EDGE_CURVE('',#5671,#5678,#5684,.T.);+#5684=LINE('',#5672,#845);+#5685=PLANE('',#5686);+#5686=AXIS2_PLACEMENT_3D('',#5674,#13,#2703);+#5687=ADVANCED_FACE('',(#5688),#829,.F.);+#5688=FACE_BOUND('',#5689,.F.);+#5689=EDGE_LOOP('',(#5690,#5694,#5695,#5696));+#5690=ORIENTED_EDGE('',*,*,#5691,.F.);+#5691=EDGE_CURVE('',#2784,#2916,#5692,.T.);+#5692=LINE('',#5693,#822);+#5693=CARTESIAN_POINT('',(-3.5,2.185,0.478548768437));+#5694=ORIENTED_EDGE('',*,*,#2783,.T.);+#5695=ORIENTED_EDGE('',*,*,#2849,.T.);+#5696=ORIENTED_EDGE('',*,*,#2915,.F.);+#5697=ADVANCED_FACE('',(#5698),#5709,.F.);+#5698=FACE_BOUND('',#5699,.F.);+#5699=EDGE_LOOP('',(#5354,#5700,#5701,#5706));+#5700=ORIENTED_EDGE('',*,*,#2842,.T.);+#5701=ORIENTED_EDGE('',*,*,#5702,.F.);+#5702=EDGE_CURVE('',#5703,#2840,#5705,.T.);+#5703=VERTEX_POINT('',#5704);+#5704=CARTESIAN_POINT('',(-3.325,-3.5,0.55));+#5705=LINE('',#5704,#2953);+#5706=ORIENTED_EDGE('',*,*,#5707,.F.);+#5707=EDGE_CURVE('',#5351,#5703,#5708,.T.);+#5708=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5352,#5704),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5709=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#5352,#5704),(#2774,#826)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5710=ADVANCED_FACE('',(#5711),#5719,.F.);+#5711=FACE_BOUND('',#5712,.F.);+#5712=EDGE_LOOP('',(#5713,#5714,#5715,#5716));+#5713=ORIENTED_EDGE('',*,*,#5702,.T.);+#5714=ORIENTED_EDGE('',*,*,#5454,.T.);+#5715=ORIENTED_EDGE('',*,*,#2970,.F.);+#5716=ORIENTED_EDGE('',*,*,#5717,.F.);+#5717=EDGE_CURVE('',#5703,#2967,#5718,.T.);+#5718=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5704,#2968),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5719=PLANE('',#5720);+#5720=AXIS2_PLACEMENT_3D('',#2968,#206,#2954);+#5721=ADVANCED_FACE('',(#5722),#5320,.F.);+#5722=FACE_BOUND('',#5723,.F.);+#5723=EDGE_LOOP('',(#5724,#5730,#5732,#5733));+#5724=ORIENTED_EDGE('',*,*,#5725,.F.);+#5725=EDGE_CURVE('',#5726,#2961,#5728,.T.);+#5726=VERTEX_POINT('',#5727);+#5727=CARTESIAN_POINT('',(-2.985,-3.5,0.55));+#5728=LINE('',#5729,#822);+#5729=CARTESIAN_POINT('',(-2.985,-3.5,0.478548768437));+#5730=ORIENTED_EDGE('',*,*,#5731,.T.);+#5731=EDGE_CURVE('',#5726,#5703,#5314,.T.);+#5732=ORIENTED_EDGE('',*,*,#5717,.T.);+#5733=ORIENTED_EDGE('',*,*,#2966,.F.);+#5734=ADVANCED_FACE('',(#5735),#5754,.F.);+#5735=FACE_BOUND('',#5736,.F.);+#5736=EDGE_LOOP('',(#5737,#5744,#5748,#5750,#5751,#5752));+#5737=ORIENTED_EDGE('',*,*,#5738,.F.);+#5738=EDGE_CURVE('',#5739,#5741,#5743,.T.);+#5739=VERTEX_POINT('',#5740);+#5740=CARTESIAN_POINT('',(-2.615,-3.7,0.65));+#5741=VERTEX_POINT('',#5742);+#5742=CARTESIAN_POINT('',(-2.615,-3.5,0.65));+#5743=LINE('',#5740,#2556);+#5744=ORIENTED_EDGE('',*,*,#5745,.T.);+#5745=EDGE_CURVE('',#5739,#5746,#5747,.T.);+#5746=VERTEX_POINT('',#2964);+#5747=LINE('',#5740,#5289);+#5748=ORIENTED_EDGE('',*,*,#5749,.T.);+#5749=EDGE_CURVE('',#5746,#2961,#2963,.T.);+#5750=ORIENTED_EDGE('',*,*,#2960,.T.);+#5751=ORIENTED_EDGE('',*,*,#4246,.F.);+#5752=ORIENTED_EDGE('',*,*,#5753,.F.);+#5753=EDGE_CURVE('',#5741,#4243,#5743,.T.);+#5754=PLANE('',#5755);+#5755=AXIS2_PLACEMENT_3D('',#5740,#273,#2557);+#5756=ADVANCED_FACE('',(#5757),#5811,.F.);+#5757=FACE_BOUND('',#5758,.F.);+#5758=EDGE_LOOP('',(#5759,#5760,#5761,#5768,#5773,#5780,#5785,#5790,#5795,#5801,#5806,#5810));+#5759=ORIENTED_EDGE('',*,*,#5458,.F.);+#5760=ORIENTED_EDGE('',*,*,#5466,.T.);+#5761=ORIENTED_EDGE('',*,*,#5762,.T.);+#5762=EDGE_CURVE('',#5467,#5763,#5765,.T.);+#5763=VERTEX_POINT('',#5764);+#5764=CARTESIAN_POINT('',(-3.798480775301,-2.985,0.467364817767));+#5765=CIRCLE('',#5766,0.1);+#5766=AXIS2_PLACEMENT_3D('',#5767,#2711,#2712);+#5767=CARTESIAN_POINT('',(-3.7,-2.985,0.45));+#5768=ORIENTED_EDGE('',*,*,#5769,.T.);+#5769=EDGE_CURVE('',#5763,#5770,#5772,.T.);+#5770=VERTEX_POINT('',#5771);+#5771=CARTESIAN_POINT('',(-3.847120194575,-2.985,0.165270364467));+#5772=LINE('',#5764,#2718);+#5773=ORIENTED_EDGE('',*,*,#5774,.T.);+#5774=EDGE_CURVE('',#5770,#5775,#5777,.T.);+#5775=VERTEX_POINT('',#5776);+#5776=CARTESIAN_POINT('',(-4.044081745177,-2.985,-2.22044604925E-16));+#5777=CIRCLE('',#5778,0.2);+#5778=AXIS2_PLACEMENT_3D('',#5779,#2727,#2728);+#5779=CARTESIAN_POINT('',(-4.044081745177,-2.985,0.2));+#5780=ORIENTED_EDGE('',*,*,#5781,.T.);+#5781=EDGE_CURVE('',#5775,#5782,#5784,.T.);+#5782=VERTEX_POINT('',#5783);+#5783=CARTESIAN_POINT('',(-4.5,-2.985,-2.22044604925E-16));+#5784=LINE('',#5776,#2702);+#5785=ORIENTED_EDGE('',*,*,#5786,.T.);+#5786=EDGE_CURVE('',#5782,#5787,#5789,.T.);+#5787=VERTEX_POINT('',#5788);+#5788=CARTESIAN_POINT('',(-4.5,-2.985,1.E-01));+#5789=LINE('',#5783,#822);+#5790=ORIENTED_EDGE('',*,*,#5791,.T.);+#5791=EDGE_CURVE('',#5787,#5792,#5794,.T.);+#5792=VERTEX_POINT('',#5793);+#5793=CARTESIAN_POINT('',(-4.044081745177,-2.985,1.E-01));+#5794=LINE('',#5788,#238);+#5795=ORIENTED_EDGE('',*,*,#5796,.T.);+#5796=EDGE_CURVE('',#5792,#5797,#5799,.T.);+#5797=VERTEX_POINT('',#5798);+#5798=CARTESIAN_POINT('',(-3.945600969876,-2.985,0.182635182233));+#5799=CIRCLE('',#5800,1.E-01);+#5800=AXIS2_PLACEMENT_3D('',#5779,#2750,#2751);+#5801=ORIENTED_EDGE('',*,*,#5802,.T.);+#5802=EDGE_CURVE('',#5797,#5803,#5805,.T.);+#5803=VERTEX_POINT('',#5804);+#5804=CARTESIAN_POINT('',(-3.896961550602,-2.985,0.484729635533));+#5805=LINE('',#5798,#2757);+#5806=ORIENTED_EDGE('',*,*,#5807,.T.);+#5807=EDGE_CURVE('',#5803,#2977,#5808,.T.);+#5808=CIRCLE('',#5809,0.2);+#5809=AXIS2_PLACEMENT_3D('',#5767,#2763,#2764);+#5810=ORIENTED_EDGE('',*,*,#2976,.T.);+#5811=PLANE('',#5812);+#5812=AXIS2_PLACEMENT_3D('',#5813,#846,#13);+#5813=CARTESIAN_POINT('',(-3.912728288784,-2.985,0.307097536874));+#5814=ADVANCED_FACE('',(#5815),#5866,.T.);+#5815=FACE_BOUND('',#5816,.T.);+#5816=EDGE_LOOP('',(#5486,#5472,#5817,#5824,#5829,#5836,#5841,#5846,#5851,#5857,#5862,#2983));+#5817=ORIENTED_EDGE('',*,*,#5818,.T.);+#5818=EDGE_CURVE('',#5474,#5819,#5821,.T.);+#5819=VERTEX_POINT('',#5820);+#5820=CARTESIAN_POINT('',(-3.798480775301,-2.615,0.467364817767));+#5821=CIRCLE('',#5822,0.1);+#5822=AXIS2_PLACEMENT_3D('',#5823,#2711,#2712);+#5823=CARTESIAN_POINT('',(-3.7,-2.615,0.45));+#5824=ORIENTED_EDGE('',*,*,#5825,.T.);+#5825=EDGE_CURVE('',#5819,#5826,#5828,.T.);+#5826=VERTEX_POINT('',#5827);+#5827=CARTESIAN_POINT('',(-3.847120194575,-2.615,0.165270364467));+#5828=LINE('',#5820,#2718);+#5829=ORIENTED_EDGE('',*,*,#5830,.T.);+#5830=EDGE_CURVE('',#5826,#5831,#5833,.T.);+#5831=VERTEX_POINT('',#5832);+#5832=CARTESIAN_POINT('',(-4.044081745177,-2.615,-2.22044604925E-16));+#5833=CIRCLE('',#5834,0.2);+#5834=AXIS2_PLACEMENT_3D('',#5835,#2727,#2728);+#5835=CARTESIAN_POINT('',(-4.044081745177,-2.615,0.2));+#5836=ORIENTED_EDGE('',*,*,#5837,.T.);+#5837=EDGE_CURVE('',#5831,#5838,#5840,.T.);+#5838=VERTEX_POINT('',#5839);+#5839=CARTESIAN_POINT('',(-4.5,-2.615,-2.22044604925E-16));+#5840=LINE('',#5832,#2702);+#5841=ORIENTED_EDGE('',*,*,#5842,.T.);+#5842=EDGE_CURVE('',#5838,#5843,#5845,.T.);+#5843=VERTEX_POINT('',#5844);+#5844=CARTESIAN_POINT('',(-4.5,-2.615,1.E-01));+#5845=LINE('',#5839,#822);+#5846=ORIENTED_EDGE('',*,*,#5847,.T.);+#5847=EDGE_CURVE('',#5843,#5848,#5850,.T.);+#5848=VERTEX_POINT('',#5849);+#5849=CARTESIAN_POINT('',(-4.044081745177,-2.615,1.E-01));+#5850=LINE('',#5844,#238);+#5851=ORIENTED_EDGE('',*,*,#5852,.T.);+#5852=EDGE_CURVE('',#5848,#5853,#5855,.T.);+#5853=VERTEX_POINT('',#5854);+#5854=CARTESIAN_POINT('',(-3.945600969876,-2.615,0.182635182233));+#5855=CIRCLE('',#5856,1.E-01);+#5856=AXIS2_PLACEMENT_3D('',#5835,#2750,#2751);+#5857=ORIENTED_EDGE('',*,*,#5858,.T.);+#5858=EDGE_CURVE('',#5853,#5859,#5861,.T.);+#5859=VERTEX_POINT('',#5860);+#5860=CARTESIAN_POINT('',(-3.896961550602,-2.615,0.484729635533));+#5861=LINE('',#5854,#2757);+#5862=ORIENTED_EDGE('',*,*,#5863,.T.);+#5863=EDGE_CURVE('',#5859,#2980,#5864,.T.);+#5864=CIRCLE('',#5865,0.2);+#5865=AXIS2_PLACEMENT_3D('',#5823,#2763,#2764);+#5866=PLANE('',#5867);+#5867=AXIS2_PLACEMENT_3D('',#5868,#846,#13);+#5868=CARTESIAN_POINT('',(-3.912728288784,-2.615,0.307097536874));+#5869=ADVANCED_FACE('',(#5870),#5877,.T.);+#5870=FACE_BOUND('',#5871,.F.);+#5871=EDGE_LOOP('',(#5872,#5862,#5875,#5876));+#5872=ORIENTED_EDGE('',*,*,#5873,.T.);+#5873=EDGE_CURVE('',#5803,#5859,#5874,.T.);+#5874=LINE('',#5804,#845);+#5875=ORIENTED_EDGE('',*,*,#2979,.F.);+#5876=ORIENTED_EDGE('',*,*,#5807,.F.);+#5877=CYLINDRICAL_SURFACE('',#5878,0.2);+#5878=AXIS2_PLACEMENT_3D('',#5767,#2934,#2764);+#5879=ADVANCED_FACE('',(#5880),#5934,.F.);+#5880=FACE_BOUND('',#5881,.F.);+#5881=EDGE_LOOP('',(#5882,#5883,#5884,#5891,#5896,#5903,#5908,#5913,#5918,#5924,#5929,#5933));+#5882=ORIENTED_EDGE('',*,*,#5492,.F.);+#5883=ORIENTED_EDGE('',*,*,#5500,.T.);+#5884=ORIENTED_EDGE('',*,*,#5885,.T.);+#5885=EDGE_CURVE('',#5501,#5886,#5888,.T.);+#5886=VERTEX_POINT('',#5887);+#5887=CARTESIAN_POINT('',(-3.798480775301,-2.185,0.467364817767));+#5888=CIRCLE('',#5889,0.1);+#5889=AXIS2_PLACEMENT_3D('',#5890,#2711,#2712);+#5890=CARTESIAN_POINT('',(-3.7,-2.185,0.45));+#5891=ORIENTED_EDGE('',*,*,#5892,.T.);+#5892=EDGE_CURVE('',#5886,#5893,#5895,.T.);+#5893=VERTEX_POINT('',#5894);+#5894=CARTESIAN_POINT('',(-3.847120194575,-2.185,0.165270364467));+#5895=LINE('',#5887,#2718);+#5896=ORIENTED_EDGE('',*,*,#5897,.T.);+#5897=EDGE_CURVE('',#5893,#5898,#5900,.T.);+#5898=VERTEX_POINT('',#5899);+#5899=CARTESIAN_POINT('',(-4.044081745177,-2.185,-2.22044604925E-16));+#5900=CIRCLE('',#5901,0.2);+#5901=AXIS2_PLACEMENT_3D('',#5902,#2727,#2728);+#5902=CARTESIAN_POINT('',(-4.044081745177,-2.185,0.2));+#5903=ORIENTED_EDGE('',*,*,#5904,.T.);+#5904=EDGE_CURVE('',#5898,#5905,#5907,.T.);+#5905=VERTEX_POINT('',#5906);+#5906=CARTESIAN_POINT('',(-4.5,-2.185,-2.22044604925E-16));+#5907=LINE('',#5899,#2702);+#5908=ORIENTED_EDGE('',*,*,#5909,.T.);+#5909=EDGE_CURVE('',#5905,#5910,#5912,.T.);+#5910=VERTEX_POINT('',#5911);+#5911=CARTESIAN_POINT('',(-4.5,-2.185,1.E-01));+#5912=LINE('',#5906,#822);+#5913=ORIENTED_EDGE('',*,*,#5914,.T.);+#5914=EDGE_CURVE('',#5910,#5915,#5917,.T.);+#5915=VERTEX_POINT('',#5916);+#5916=CARTESIAN_POINT('',(-4.044081745177,-2.185,1.E-01));+#5917=LINE('',#5911,#238);+#5918=ORIENTED_EDGE('',*,*,#5919,.T.);+#5919=EDGE_CURVE('',#5915,#5920,#5922,.T.);+#5920=VERTEX_POINT('',#5921);+#5921=CARTESIAN_POINT('',(-3.945600969876,-2.185,0.182635182233));+#5922=CIRCLE('',#5923,1.E-01);+#5923=AXIS2_PLACEMENT_3D('',#5902,#2750,#2751);+#5924=ORIENTED_EDGE('',*,*,#5925,.T.);+#5925=EDGE_CURVE('',#5920,#5926,#5928,.T.);+#5926=VERTEX_POINT('',#5927);+#5927=CARTESIAN_POINT('',(-3.896961550602,-2.185,0.484729635533));+#5928=LINE('',#5921,#2757);+#5929=ORIENTED_EDGE('',*,*,#5930,.T.);+#5930=EDGE_CURVE('',#5926,#3012,#5931,.T.);+#5931=CIRCLE('',#5932,0.2);+#5932=AXIS2_PLACEMENT_3D('',#5890,#2763,#2764);+#5933=ORIENTED_EDGE('',*,*,#3011,.T.);+#5934=PLANE('',#5935);+#5935=AXIS2_PLACEMENT_3D('',#5936,#846,#13);+#5936=CARTESIAN_POINT('',(-3.912728288784,-2.185,0.307097536874));+#5937=ADVANCED_FACE('',(#5938),#5989,.T.);+#5938=FACE_BOUND('',#5939,.T.);+#5939=EDGE_LOOP('',(#5520,#5506,#5940,#5947,#5952,#5959,#5964,#5969,#5974,#5980,#5985,#3018));+#5940=ORIENTED_EDGE('',*,*,#5941,.T.);+#5941=EDGE_CURVE('',#5508,#5942,#5944,.T.);+#5942=VERTEX_POINT('',#5943);+#5943=CARTESIAN_POINT('',(-3.798480775301,-1.815,0.467364817767));+#5944=CIRCLE('',#5945,0.1);+#5945=AXIS2_PLACEMENT_3D('',#5946,#2711,#2712);+#5946=CARTESIAN_POINT('',(-3.7,-1.815,0.45));+#5947=ORIENTED_EDGE('',*,*,#5948,.T.);+#5948=EDGE_CURVE('',#5942,#5949,#5951,.T.);+#5949=VERTEX_POINT('',#5950);+#5950=CARTESIAN_POINT('',(-3.847120194575,-1.815,0.165270364467));+#5951=LINE('',#5943,#2718);+#5952=ORIENTED_EDGE('',*,*,#5953,.T.);+#5953=EDGE_CURVE('',#5949,#5954,#5956,.T.);+#5954=VERTEX_POINT('',#5955);+#5955=CARTESIAN_POINT('',(-4.044081745177,-1.815,-2.22044604925E-16));+#5956=CIRCLE('',#5957,0.2);+#5957=AXIS2_PLACEMENT_3D('',#5958,#2727,#2728);+#5958=CARTESIAN_POINT('',(-4.044081745177,-1.815,0.2));+#5959=ORIENTED_EDGE('',*,*,#5960,.T.);+#5960=EDGE_CURVE('',#5954,#5961,#5963,.T.);+#5961=VERTEX_POINT('',#5962);+#5962=CARTESIAN_POINT('',(-4.5,-1.815,-2.22044604925E-16));+#5963=LINE('',#5955,#2702);+#5964=ORIENTED_EDGE('',*,*,#5965,.T.);+#5965=EDGE_CURVE('',#5961,#5966,#5968,.T.);+#5966=VERTEX_POINT('',#5967);+#5967=CARTESIAN_POINT('',(-4.5,-1.815,1.E-01));+#5968=LINE('',#5962,#822);+#5969=ORIENTED_EDGE('',*,*,#5970,.T.);+#5970=EDGE_CURVE('',#5966,#5971,#5973,.T.);+#5971=VERTEX_POINT('',#5972);+#5972=CARTESIAN_POINT('',(-4.044081745177,-1.815,1.E-01));+#5973=LINE('',#5967,#238);+#5974=ORIENTED_EDGE('',*,*,#5975,.T.);+#5975=EDGE_CURVE('',#5971,#5976,#5978,.T.);+#5976=VERTEX_POINT('',#5977);+#5977=CARTESIAN_POINT('',(-3.945600969876,-1.815,0.182635182233));+#5978=CIRCLE('',#5979,1.E-01);+#5979=AXIS2_PLACEMENT_3D('',#5958,#2750,#2751);+#5980=ORIENTED_EDGE('',*,*,#5981,.T.);+#5981=EDGE_CURVE('',#5976,#5982,#5984,.T.);+#5982=VERTEX_POINT('',#5983);+#5983=CARTESIAN_POINT('',(-3.896961550602,-1.815,0.484729635533));+#5984=LINE('',#5977,#2757);+#5985=ORIENTED_EDGE('',*,*,#5986,.T.);+#5986=EDGE_CURVE('',#5982,#3015,#5987,.T.);+#5987=CIRCLE('',#5988,0.2);+#5988=AXIS2_PLACEMENT_3D('',#5946,#2763,#2764);+#5989=PLANE('',#5990);+#5990=AXIS2_PLACEMENT_3D('',#5991,#846,#13);+#5991=CARTESIAN_POINT('',(-3.912728288784,-1.815,0.307097536874));+#5992=ADVANCED_FACE('',(#5993),#6000,.T.);+#5993=FACE_BOUND('',#5994,.F.);+#5994=EDGE_LOOP('',(#5995,#5985,#5998,#5999));+#5995=ORIENTED_EDGE('',*,*,#5996,.T.);+#5996=EDGE_CURVE('',#5926,#5982,#5997,.T.);+#5997=LINE('',#5927,#845);+#5998=ORIENTED_EDGE('',*,*,#3014,.F.);+#5999=ORIENTED_EDGE('',*,*,#5930,.F.);+#6000=CYLINDRICAL_SURFACE('',#6001,0.2);+#6001=AXIS2_PLACEMENT_3D('',#5890,#2934,#2764);+#6002=ADVANCED_FACE('',(#6003),#6057,.F.);+#6003=FACE_BOUND('',#6004,.F.);+#6004=EDGE_LOOP('',(#6005,#6006,#6007,#6014,#6019,#6026,#6031,#6036,#6041,#6047,#6052,#6056));+#6005=ORIENTED_EDGE('',*,*,#5526,.F.);+#6006=ORIENTED_EDGE('',*,*,#5534,.T.);+#6007=ORIENTED_EDGE('',*,*,#6008,.T.);+#6008=EDGE_CURVE('',#5535,#6009,#6011,.T.);+#6009=VERTEX_POINT('',#6010);+#6010=CARTESIAN_POINT('',(-3.798480775301,-1.385,0.467364817767));+#6011=CIRCLE('',#6012,0.1);+#6012=AXIS2_PLACEMENT_3D('',#6013,#2711,#2712);+#6013=CARTESIAN_POINT('',(-3.7,-1.385,0.45));+#6014=ORIENTED_EDGE('',*,*,#6015,.T.);+#6015=EDGE_CURVE('',#6009,#6016,#6018,.T.);+#6016=VERTEX_POINT('',#6017);+#6017=CARTESIAN_POINT('',(-3.847120194575,-1.385,0.165270364467));+#6018=LINE('',#6010,#2718);+#6019=ORIENTED_EDGE('',*,*,#6020,.T.);+#6020=EDGE_CURVE('',#6016,#6021,#6023,.T.);+#6021=VERTEX_POINT('',#6022);+#6022=CARTESIAN_POINT('',(-4.044081745177,-1.385,-2.22044604925E-16));+#6023=CIRCLE('',#6024,0.2);+#6024=AXIS2_PLACEMENT_3D('',#6025,#2727,#2728);+#6025=CARTESIAN_POINT('',(-4.044081745177,-1.385,0.2));+#6026=ORIENTED_EDGE('',*,*,#6027,.T.);+#6027=EDGE_CURVE('',#6021,#6028,#6030,.T.);+#6028=VERTEX_POINT('',#6029);+#6029=CARTESIAN_POINT('',(-4.5,-1.385,-2.22044604925E-16));+#6030=LINE('',#6022,#2702);+#6031=ORIENTED_EDGE('',*,*,#6032,.T.);+#6032=EDGE_CURVE('',#6028,#6033,#6035,.T.);+#6033=VERTEX_POINT('',#6034);+#6034=CARTESIAN_POINT('',(-4.5,-1.385,1.E-01));+#6035=LINE('',#6029,#822);+#6036=ORIENTED_EDGE('',*,*,#6037,.T.);+#6037=EDGE_CURVE('',#6033,#6038,#6040,.T.);+#6038=VERTEX_POINT('',#6039);+#6039=CARTESIAN_POINT('',(-4.044081745177,-1.385,1.E-01));+#6040=LINE('',#6034,#238);+#6041=ORIENTED_EDGE('',*,*,#6042,.T.);+#6042=EDGE_CURVE('',#6038,#6043,#6045,.T.);+#6043=VERTEX_POINT('',#6044);+#6044=CARTESIAN_POINT('',(-3.945600969876,-1.385,0.182635182233));+#6045=CIRCLE('',#6046,1.E-01);+#6046=AXIS2_PLACEMENT_3D('',#6025,#2750,#2751);+#6047=ORIENTED_EDGE('',*,*,#6048,.T.);+#6048=EDGE_CURVE('',#6043,#6049,#6051,.T.);+#6049=VERTEX_POINT('',#6050);+#6050=CARTESIAN_POINT('',(-3.896961550602,-1.385,0.484729635533));+#6051=LINE('',#6044,#2757);+#6052=ORIENTED_EDGE('',*,*,#6053,.T.);+#6053=EDGE_CURVE('',#6049,#3047,#6054,.T.);+#6054=CIRCLE('',#6055,0.2);+#6055=AXIS2_PLACEMENT_3D('',#6013,#2763,#2764);+#6056=ORIENTED_EDGE('',*,*,#3046,.T.);+#6057=PLANE('',#6058);+#6058=AXIS2_PLACEMENT_3D('',#6059,#846,#13);+#6059=CARTESIAN_POINT('',(-3.912728288784,-1.385,0.307097536874));+#6060=ADVANCED_FACE('',(#6061),#6112,.T.);+#6061=FACE_BOUND('',#6062,.T.);+#6062=EDGE_LOOP('',(#5554,#5540,#6063,#6070,#6075,#6082,#6087,#6092,#6097,#6103,#6108,#3053));+#6063=ORIENTED_EDGE('',*,*,#6064,.T.);+#6064=EDGE_CURVE('',#5542,#6065,#6067,.T.);+#6065=VERTEX_POINT('',#6066);+#6066=CARTESIAN_POINT('',(-3.798480775301,-1.015,0.467364817767));+#6067=CIRCLE('',#6068,0.1);+#6068=AXIS2_PLACEMENT_3D('',#6069,#2711,#2712);+#6069=CARTESIAN_POINT('',(-3.7,-1.015,0.45));+#6070=ORIENTED_EDGE('',*,*,#6071,.T.);+#6071=EDGE_CURVE('',#6065,#6072,#6074,.T.);+#6072=VERTEX_POINT('',#6073);+#6073=CARTESIAN_POINT('',(-3.847120194575,-1.015,0.165270364467));+#6074=LINE('',#6066,#2718);+#6075=ORIENTED_EDGE('',*,*,#6076,.T.);+#6076=EDGE_CURVE('',#6072,#6077,#6079,.T.);+#6077=VERTEX_POINT('',#6078);+#6078=CARTESIAN_POINT('',(-4.044081745177,-1.015,-2.22044604925E-16));+#6079=CIRCLE('',#6080,0.2);+#6080=AXIS2_PLACEMENT_3D('',#6081,#2727,#2728);+#6081=CARTESIAN_POINT('',(-4.044081745177,-1.015,0.2));+#6082=ORIENTED_EDGE('',*,*,#6083,.T.);+#6083=EDGE_CURVE('',#6077,#6084,#6086,.T.);+#6084=VERTEX_POINT('',#6085);+#6085=CARTESIAN_POINT('',(-4.5,-1.015,-2.22044604925E-16));+#6086=LINE('',#6078,#2702);+#6087=ORIENTED_EDGE('',*,*,#6088,.T.);+#6088=EDGE_CURVE('',#6084,#6089,#6091,.T.);+#6089=VERTEX_POINT('',#6090);+#6090=CARTESIAN_POINT('',(-4.5,-1.015,1.E-01));+#6091=LINE('',#6085,#822);+#6092=ORIENTED_EDGE('',*,*,#6093,.T.);+#6093=EDGE_CURVE('',#6089,#6094,#6096,.T.);+#6094=VERTEX_POINT('',#6095);+#6095=CARTESIAN_POINT('',(-4.044081745177,-1.015,1.E-01));+#6096=LINE('',#6090,#238);+#6097=ORIENTED_EDGE('',*,*,#6098,.T.);+#6098=EDGE_CURVE('',#6094,#6099,#6101,.T.);+#6099=VERTEX_POINT('',#6100);+#6100=CARTESIAN_POINT('',(-3.945600969876,-1.015,0.182635182233));+#6101=CIRCLE('',#6102,1.E-01);+#6102=AXIS2_PLACEMENT_3D('',#6081,#2750,#2751);+#6103=ORIENTED_EDGE('',*,*,#6104,.T.);+#6104=EDGE_CURVE('',#6099,#6105,#6107,.T.);+#6105=VERTEX_POINT('',#6106);+#6106=CARTESIAN_POINT('',(-3.896961550602,-1.015,0.484729635533));+#6107=LINE('',#6100,#2757);+#6108=ORIENTED_EDGE('',*,*,#6109,.T.);+#6109=EDGE_CURVE('',#6105,#3050,#6110,.T.);+#6110=CIRCLE('',#6111,0.2);+#6111=AXIS2_PLACEMENT_3D('',#6069,#2763,#2764);+#6112=PLANE('',#6113);+#6113=AXIS2_PLACEMENT_3D('',#6114,#846,#13);+#6114=CARTESIAN_POINT('',(-3.912728288784,-1.015,0.307097536874));+#6115=ADVANCED_FACE('',(#6116),#6123,.T.);+#6116=FACE_BOUND('',#6117,.F.);+#6117=EDGE_LOOP('',(#6118,#6108,#6121,#6122));+#6118=ORIENTED_EDGE('',*,*,#6119,.T.);+#6119=EDGE_CURVE('',#6049,#6105,#6120,.T.);+#6120=LINE('',#6050,#845);+#6121=ORIENTED_EDGE('',*,*,#3049,.F.);+#6122=ORIENTED_EDGE('',*,*,#6053,.F.);+#6123=CYLINDRICAL_SURFACE('',#6124,0.2);+#6124=AXIS2_PLACEMENT_3D('',#6013,#2934,#2764);+#6125=ADVANCED_FACE('',(#6126),#6180,.F.);+#6126=FACE_BOUND('',#6127,.F.);+#6127=EDGE_LOOP('',(#6128,#6129,#6130,#6137,#6142,#6149,#6154,#6159,#6164,#6170,#6175,#6179));+#6128=ORIENTED_EDGE('',*,*,#5560,.F.);+#6129=ORIENTED_EDGE('',*,*,#5568,.T.);+#6130=ORIENTED_EDGE('',*,*,#6131,.T.);+#6131=EDGE_CURVE('',#5569,#6132,#6134,.T.);+#6132=VERTEX_POINT('',#6133);+#6133=CARTESIAN_POINT('',(-3.798480775301,-0.585,0.467364817767));+#6134=CIRCLE('',#6135,0.1);+#6135=AXIS2_PLACEMENT_3D('',#6136,#2711,#2712);+#6136=CARTESIAN_POINT('',(-3.7,-0.585,0.45));+#6137=ORIENTED_EDGE('',*,*,#6138,.T.);+#6138=EDGE_CURVE('',#6132,#6139,#6141,.T.);+#6139=VERTEX_POINT('',#6140);+#6140=CARTESIAN_POINT('',(-3.847120194575,-0.585,0.165270364467));+#6141=LINE('',#6133,#2718);+#6142=ORIENTED_EDGE('',*,*,#6143,.T.);+#6143=EDGE_CURVE('',#6139,#6144,#6146,.T.);+#6144=VERTEX_POINT('',#6145);+#6145=CARTESIAN_POINT('',(-4.044081745177,-0.585,-2.22044604925E-16));+#6146=CIRCLE('',#6147,0.2);+#6147=AXIS2_PLACEMENT_3D('',#6148,#2727,#2728);+#6148=CARTESIAN_POINT('',(-4.044081745177,-0.585,0.2));+#6149=ORIENTED_EDGE('',*,*,#6150,.T.);+#6150=EDGE_CURVE('',#6144,#6151,#6153,.T.);+#6151=VERTEX_POINT('',#6152);+#6152=CARTESIAN_POINT('',(-4.5,-0.585,-2.22044604925E-16));+#6153=LINE('',#6145,#2702);+#6154=ORIENTED_EDGE('',*,*,#6155,.T.);+#6155=EDGE_CURVE('',#6151,#6156,#6158,.T.);+#6156=VERTEX_POINT('',#6157);+#6157=CARTESIAN_POINT('',(-4.5,-0.585,1.E-01));+#6158=LINE('',#6152,#822);+#6159=ORIENTED_EDGE('',*,*,#6160,.T.);+#6160=EDGE_CURVE('',#6156,#6161,#6163,.T.);+#6161=VERTEX_POINT('',#6162);+#6162=CARTESIAN_POINT('',(-4.044081745177,-0.585,1.E-01));+#6163=LINE('',#6157,#238);+#6164=ORIENTED_EDGE('',*,*,#6165,.T.);+#6165=EDGE_CURVE('',#6161,#6166,#6168,.T.);+#6166=VERTEX_POINT('',#6167);+#6167=CARTESIAN_POINT('',(-3.945600969876,-0.585,0.182635182233));+#6168=CIRCLE('',#6169,1.E-01);+#6169=AXIS2_PLACEMENT_3D('',#6148,#2750,#2751);+#6170=ORIENTED_EDGE('',*,*,#6171,.T.);+#6171=EDGE_CURVE('',#6166,#6172,#6174,.T.);+#6172=VERTEX_POINT('',#6173);+#6173=CARTESIAN_POINT('',(-3.896961550602,-0.585,0.484729635533));+#6174=LINE('',#6167,#2757);+#6175=ORIENTED_EDGE('',*,*,#6176,.T.);+#6176=EDGE_CURVE('',#6172,#3082,#6177,.T.);+#6177=CIRCLE('',#6178,0.2);+#6178=AXIS2_PLACEMENT_3D('',#6136,#2763,#2764);+#6179=ORIENTED_EDGE('',*,*,#3081,.T.);+#6180=PLANE('',#6181);+#6181=AXIS2_PLACEMENT_3D('',#6182,#846,#13);+#6182=CARTESIAN_POINT('',(-3.912728288784,-0.585,0.307097536874));+#6183=ADVANCED_FACE('',(#6184),#6235,.T.);+#6184=FACE_BOUND('',#6185,.T.);+#6185=EDGE_LOOP('',(#5588,#5574,#6186,#6193,#6198,#6205,#6210,#6215,#6220,#6226,#6231,#3088));+#6186=ORIENTED_EDGE('',*,*,#6187,.T.);+#6187=EDGE_CURVE('',#5576,#6188,#6190,.T.);+#6188=VERTEX_POINT('',#6189);+#6189=CARTESIAN_POINT('',(-3.798480775301,-0.215,0.467364817767));+#6190=CIRCLE('',#6191,0.1);+#6191=AXIS2_PLACEMENT_3D('',#6192,#2711,#2712);+#6192=CARTESIAN_POINT('',(-3.7,-0.215,0.45));+#6193=ORIENTED_EDGE('',*,*,#6194,.T.);+#6194=EDGE_CURVE('',#6188,#6195,#6197,.T.);+#6195=VERTEX_POINT('',#6196);+#6196=CARTESIAN_POINT('',(-3.847120194575,-0.215,0.165270364467));+#6197=LINE('',#6189,#2718);+#6198=ORIENTED_EDGE('',*,*,#6199,.T.);+#6199=EDGE_CURVE('',#6195,#6200,#6202,.T.);+#6200=VERTEX_POINT('',#6201);+#6201=CARTESIAN_POINT('',(-4.044081745177,-0.215,-2.22044604925E-16));+#6202=CIRCLE('',#6203,0.2);+#6203=AXIS2_PLACEMENT_3D('',#6204,#2727,#2728);+#6204=CARTESIAN_POINT('',(-4.044081745177,-0.215,0.2));+#6205=ORIENTED_EDGE('',*,*,#6206,.T.);+#6206=EDGE_CURVE('',#6200,#6207,#6209,.T.);+#6207=VERTEX_POINT('',#6208);+#6208=CARTESIAN_POINT('',(-4.5,-0.215,-2.22044604925E-16));+#6209=LINE('',#6201,#2702);+#6210=ORIENTED_EDGE('',*,*,#6211,.T.);+#6211=EDGE_CURVE('',#6207,#6212,#6214,.T.);+#6212=VERTEX_POINT('',#6213);+#6213=CARTESIAN_POINT('',(-4.5,-0.215,1.E-01));+#6214=LINE('',#6208,#822);+#6215=ORIENTED_EDGE('',*,*,#6216,.T.);+#6216=EDGE_CURVE('',#6212,#6217,#6219,.T.);+#6217=VERTEX_POINT('',#6218);+#6218=CARTESIAN_POINT('',(-4.044081745177,-0.215,1.E-01));+#6219=LINE('',#6213,#238);+#6220=ORIENTED_EDGE('',*,*,#6221,.T.);+#6221=EDGE_CURVE('',#6217,#6222,#6224,.T.);+#6222=VERTEX_POINT('',#6223);+#6223=CARTESIAN_POINT('',(-3.945600969876,-0.215,0.182635182233));+#6224=CIRCLE('',#6225,1.E-01);+#6225=AXIS2_PLACEMENT_3D('',#6204,#2750,#2751);+#6226=ORIENTED_EDGE('',*,*,#6227,.T.);+#6227=EDGE_CURVE('',#6222,#6228,#6230,.T.);+#6228=VERTEX_POINT('',#6229);+#6229=CARTESIAN_POINT('',(-3.896961550602,-0.215,0.484729635533));+#6230=LINE('',#6223,#2757);+#6231=ORIENTED_EDGE('',*,*,#6232,.T.);+#6232=EDGE_CURVE('',#6228,#3085,#6233,.T.);+#6233=CIRCLE('',#6234,0.2);+#6234=AXIS2_PLACEMENT_3D('',#6192,#2763,#2764);+#6235=PLANE('',#6236);+#6236=AXIS2_PLACEMENT_3D('',#6237,#846,#13);+#6237=CARTESIAN_POINT('',(-3.912728288784,-0.215,0.307097536874));+#6238=ADVANCED_FACE('',(#6239),#6246,.T.);+#6239=FACE_BOUND('',#6240,.F.);+#6240=EDGE_LOOP('',(#6241,#6231,#6244,#6245));+#6241=ORIENTED_EDGE('',*,*,#6242,.T.);+#6242=EDGE_CURVE('',#6172,#6228,#6243,.T.);+#6243=LINE('',#6173,#845);+#6244=ORIENTED_EDGE('',*,*,#3084,.F.);+#6245=ORIENTED_EDGE('',*,*,#6176,.F.);+#6246=CYLINDRICAL_SURFACE('',#6247,0.2);+#6247=AXIS2_PLACEMENT_3D('',#6136,#2934,#2764);+#6248=ADVANCED_FACE('',(#6249),#6303,.F.);+#6249=FACE_BOUND('',#6250,.F.);+#6250=EDGE_LOOP('',(#6251,#6252,#6253,#6260,#6265,#6272,#6277,#6282,#6287,#6293,#6298,#6302));+#6251=ORIENTED_EDGE('',*,*,#5594,.F.);+#6252=ORIENTED_EDGE('',*,*,#5602,.T.);+#6253=ORIENTED_EDGE('',*,*,#6254,.T.);+#6254=EDGE_CURVE('',#5603,#6255,#6257,.T.);+#6255=VERTEX_POINT('',#6256);+#6256=CARTESIAN_POINT('',(-3.798480775301,0.215,0.467364817767));+#6257=CIRCLE('',#6258,0.1);+#6258=AXIS2_PLACEMENT_3D('',#6259,#2711,#2712);+#6259=CARTESIAN_POINT('',(-3.7,0.215,0.45));+#6260=ORIENTED_EDGE('',*,*,#6261,.T.);+#6261=EDGE_CURVE('',#6255,#6262,#6264,.T.);+#6262=VERTEX_POINT('',#6263);+#6263=CARTESIAN_POINT('',(-3.847120194575,0.215,0.165270364467));+#6264=LINE('',#6256,#2718);+#6265=ORIENTED_EDGE('',*,*,#6266,.T.);+#6266=EDGE_CURVE('',#6262,#6267,#6269,.T.);+#6267=VERTEX_POINT('',#6268);+#6268=CARTESIAN_POINT('',(-4.044081745177,0.215,-2.22044604925E-16));+#6269=CIRCLE('',#6270,0.2);+#6270=AXIS2_PLACEMENT_3D('',#6271,#2727,#2728);+#6271=CARTESIAN_POINT('',(-4.044081745177,0.215,0.2));+#6272=ORIENTED_EDGE('',*,*,#6273,.T.);+#6273=EDGE_CURVE('',#6267,#6274,#6276,.T.);+#6274=VERTEX_POINT('',#6275);+#6275=CARTESIAN_POINT('',(-4.5,0.215,-2.22044604925E-16));+#6276=LINE('',#6268,#2702);+#6277=ORIENTED_EDGE('',*,*,#6278,.T.);+#6278=EDGE_CURVE('',#6274,#6279,#6281,.T.);+#6279=VERTEX_POINT('',#6280);+#6280=CARTESIAN_POINT('',(-4.5,0.215,1.E-01));+#6281=LINE('',#6275,#822);+#6282=ORIENTED_EDGE('',*,*,#6283,.T.);+#6283=EDGE_CURVE('',#6279,#6284,#6286,.T.);+#6284=VERTEX_POINT('',#6285);+#6285=CARTESIAN_POINT('',(-4.044081745177,0.215,1.E-01));+#6286=LINE('',#6280,#238);+#6287=ORIENTED_EDGE('',*,*,#6288,.T.);+#6288=EDGE_CURVE('',#6284,#6289,#6291,.T.);+#6289=VERTEX_POINT('',#6290);+#6290=CARTESIAN_POINT('',(-3.945600969876,0.215,0.182635182233));+#6291=CIRCLE('',#6292,1.E-01);+#6292=AXIS2_PLACEMENT_3D('',#6271,#2750,#2751);+#6293=ORIENTED_EDGE('',*,*,#6294,.T.);+#6294=EDGE_CURVE('',#6289,#6295,#6297,.T.);+#6295=VERTEX_POINT('',#6296);+#6296=CARTESIAN_POINT('',(-3.896961550602,0.215,0.484729635533));+#6297=LINE('',#6290,#2757);+#6298=ORIENTED_EDGE('',*,*,#6299,.T.);+#6299=EDGE_CURVE('',#6295,#3117,#6300,.T.);+#6300=CIRCLE('',#6301,0.2);+#6301=AXIS2_PLACEMENT_3D('',#6259,#2763,#2764);+#6302=ORIENTED_EDGE('',*,*,#3116,.T.);+#6303=PLANE('',#6304);+#6304=AXIS2_PLACEMENT_3D('',#6305,#846,#13);+#6305=CARTESIAN_POINT('',(-3.912728288784,0.215,0.307097536874));+#6306=ADVANCED_FACE('',(#6307),#6358,.T.);+#6307=FACE_BOUND('',#6308,.T.);+#6308=EDGE_LOOP('',(#5622,#5608,#6309,#6316,#6321,#6328,#6333,#6338,#6343,#6349,#6354,#3123));+#6309=ORIENTED_EDGE('',*,*,#6310,.T.);+#6310=EDGE_CURVE('',#5610,#6311,#6313,.T.);+#6311=VERTEX_POINT('',#6312);+#6312=CARTESIAN_POINT('',(-3.798480775301,0.585,0.467364817767));+#6313=CIRCLE('',#6314,0.1);+#6314=AXIS2_PLACEMENT_3D('',#6315,#2711,#2712);+#6315=CARTESIAN_POINT('',(-3.7,0.585,0.45));+#6316=ORIENTED_EDGE('',*,*,#6317,.T.);+#6317=EDGE_CURVE('',#6311,#6318,#6320,.T.);+#6318=VERTEX_POINT('',#6319);+#6319=CARTESIAN_POINT('',(-3.847120194575,0.585,0.165270364467));+#6320=LINE('',#6312,#2718);+#6321=ORIENTED_EDGE('',*,*,#6322,.T.);+#6322=EDGE_CURVE('',#6318,#6323,#6325,.T.);+#6323=VERTEX_POINT('',#6324);+#6324=CARTESIAN_POINT('',(-4.044081745177,0.585,-2.22044604925E-16));+#6325=CIRCLE('',#6326,0.2);+#6326=AXIS2_PLACEMENT_3D('',#6327,#2727,#2728);+#6327=CARTESIAN_POINT('',(-4.044081745177,0.585,0.2));+#6328=ORIENTED_EDGE('',*,*,#6329,.T.);+#6329=EDGE_CURVE('',#6323,#6330,#6332,.T.);+#6330=VERTEX_POINT('',#6331);+#6331=CARTESIAN_POINT('',(-4.5,0.585,-2.22044604925E-16));+#6332=LINE('',#6324,#2702);+#6333=ORIENTED_EDGE('',*,*,#6334,.T.);+#6334=EDGE_CURVE('',#6330,#6335,#6337,.T.);+#6335=VERTEX_POINT('',#6336);+#6336=CARTESIAN_POINT('',(-4.5,0.585,1.E-01));+#6337=LINE('',#6331,#822);+#6338=ORIENTED_EDGE('',*,*,#6339,.T.);+#6339=EDGE_CURVE('',#6335,#6340,#6342,.T.);+#6340=VERTEX_POINT('',#6341);+#6341=CARTESIAN_POINT('',(-4.044081745177,0.585,1.E-01));+#6342=LINE('',#6336,#238);+#6343=ORIENTED_EDGE('',*,*,#6344,.T.);+#6344=EDGE_CURVE('',#6340,#6345,#6347,.T.);+#6345=VERTEX_POINT('',#6346);+#6346=CARTESIAN_POINT('',(-3.945600969876,0.585,0.182635182233));+#6347=CIRCLE('',#6348,1.E-01);+#6348=AXIS2_PLACEMENT_3D('',#6327,#2750,#2751);+#6349=ORIENTED_EDGE('',*,*,#6350,.T.);+#6350=EDGE_CURVE('',#6345,#6351,#6353,.T.);+#6351=VERTEX_POINT('',#6352);+#6352=CARTESIAN_POINT('',(-3.896961550602,0.585,0.484729635533));+#6353=LINE('',#6346,#2757);+#6354=ORIENTED_EDGE('',*,*,#6355,.T.);+#6355=EDGE_CURVE('',#6351,#3120,#6356,.T.);+#6356=CIRCLE('',#6357,0.2);+#6357=AXIS2_PLACEMENT_3D('',#6315,#2763,#2764);+#6358=PLANE('',#6359);+#6359=AXIS2_PLACEMENT_3D('',#6360,#846,#13);+#6360=CARTESIAN_POINT('',(-3.912728288784,0.585,0.307097536874));+#6361=ADVANCED_FACE('',(#6362),#6369,.T.);+#6362=FACE_BOUND('',#6363,.F.);+#6363=EDGE_LOOP('',(#6364,#6354,#6367,#6368));+#6364=ORIENTED_EDGE('',*,*,#6365,.T.);+#6365=EDGE_CURVE('',#6295,#6351,#6366,.T.);+#6366=LINE('',#6296,#845);+#6367=ORIENTED_EDGE('',*,*,#3119,.F.);+#6368=ORIENTED_EDGE('',*,*,#6299,.F.);+#6369=CYLINDRICAL_SURFACE('',#6370,0.2);+#6370=AXIS2_PLACEMENT_3D('',#6259,#2934,#2764);+#6371=ADVANCED_FACE('',(#6372),#6426,.F.);+#6372=FACE_BOUND('',#6373,.F.);+#6373=EDGE_LOOP('',(#6374,#6375,#6376,#6383,#6388,#6395,#6400,#6405,#6410,#6416,#6421,#6425));+#6374=ORIENTED_EDGE('',*,*,#5628,.F.);+#6375=ORIENTED_EDGE('',*,*,#5636,.T.);+#6376=ORIENTED_EDGE('',*,*,#6377,.T.);+#6377=EDGE_CURVE('',#5637,#6378,#6380,.T.);+#6378=VERTEX_POINT('',#6379);+#6379=CARTESIAN_POINT('',(-3.798480775301,1.015,0.467364817767));+#6380=CIRCLE('',#6381,0.1);+#6381=AXIS2_PLACEMENT_3D('',#6382,#2711,#2712);+#6382=CARTESIAN_POINT('',(-3.7,1.015,0.45));+#6383=ORIENTED_EDGE('',*,*,#6384,.T.);+#6384=EDGE_CURVE('',#6378,#6385,#6387,.T.);+#6385=VERTEX_POINT('',#6386);+#6386=CARTESIAN_POINT('',(-3.847120194575,1.015,0.165270364467));+#6387=LINE('',#6379,#2718);+#6388=ORIENTED_EDGE('',*,*,#6389,.T.);+#6389=EDGE_CURVE('',#6385,#6390,#6392,.T.);+#6390=VERTEX_POINT('',#6391);+#6391=CARTESIAN_POINT('',(-4.044081745177,1.015,-2.22044604925E-16));+#6392=CIRCLE('',#6393,0.2);+#6393=AXIS2_PLACEMENT_3D('',#6394,#2727,#2728);+#6394=CARTESIAN_POINT('',(-4.044081745177,1.015,0.2));+#6395=ORIENTED_EDGE('',*,*,#6396,.T.);+#6396=EDGE_CURVE('',#6390,#6397,#6399,.T.);+#6397=VERTEX_POINT('',#6398);+#6398=CARTESIAN_POINT('',(-4.5,1.015,-2.22044604925E-16));+#6399=LINE('',#6391,#2702);+#6400=ORIENTED_EDGE('',*,*,#6401,.T.);+#6401=EDGE_CURVE('',#6397,#6402,#6404,.T.);+#6402=VERTEX_POINT('',#6403);+#6403=CARTESIAN_POINT('',(-4.5,1.015,1.E-01));+#6404=LINE('',#6398,#822);+#6405=ORIENTED_EDGE('',*,*,#6406,.T.);+#6406=EDGE_CURVE('',#6402,#6407,#6409,.T.);+#6407=VERTEX_POINT('',#6408);+#6408=CARTESIAN_POINT('',(-4.044081745177,1.015,1.E-01));+#6409=LINE('',#6403,#238);+#6410=ORIENTED_EDGE('',*,*,#6411,.T.);+#6411=EDGE_CURVE('',#6407,#6412,#6414,.T.);+#6412=VERTEX_POINT('',#6413);+#6413=CARTESIAN_POINT('',(-3.945600969876,1.015,0.182635182233));+#6414=CIRCLE('',#6415,1.E-01);+#6415=AXIS2_PLACEMENT_3D('',#6394,#2750,#2751);+#6416=ORIENTED_EDGE('',*,*,#6417,.T.);+#6417=EDGE_CURVE('',#6412,#6418,#6420,.T.);+#6418=VERTEX_POINT('',#6419);+#6419=CARTESIAN_POINT('',(-3.896961550602,1.015,0.484729635533));+#6420=LINE('',#6413,#2757);+#6421=ORIENTED_EDGE('',*,*,#6422,.T.);+#6422=EDGE_CURVE('',#6418,#3152,#6423,.T.);+#6423=CIRCLE('',#6424,0.2);+#6424=AXIS2_PLACEMENT_3D('',#6382,#2763,#2764);+#6425=ORIENTED_EDGE('',*,*,#3151,.T.);+#6426=PLANE('',#6427);+#6427=AXIS2_PLACEMENT_3D('',#6428,#846,#13);+#6428=CARTESIAN_POINT('',(-3.912728288784,1.015,0.307097536874));+#6429=ADVANCED_FACE('',(#6430),#6481,.T.);+#6430=FACE_BOUND('',#6431,.T.);+#6431=EDGE_LOOP('',(#5656,#5642,#6432,#6439,#6444,#6451,#6456,#6461,#6466,#6472,#6477,#3158));+#6432=ORIENTED_EDGE('',*,*,#6433,.T.);+#6433=EDGE_CURVE('',#5644,#6434,#6436,.T.);+#6434=VERTEX_POINT('',#6435);+#6435=CARTESIAN_POINT('',(-3.798480775301,1.385,0.467364817767));+#6436=CIRCLE('',#6437,0.1);+#6437=AXIS2_PLACEMENT_3D('',#6438,#2711,#2712);+#6438=CARTESIAN_POINT('',(-3.7,1.385,0.45));+#6439=ORIENTED_EDGE('',*,*,#6440,.T.);+#6440=EDGE_CURVE('',#6434,#6441,#6443,.T.);+#6441=VERTEX_POINT('',#6442);+#6442=CARTESIAN_POINT('',(-3.847120194575,1.385,0.165270364467));+#6443=LINE('',#6435,#2718);+#6444=ORIENTED_EDGE('',*,*,#6445,.T.);+#6445=EDGE_CURVE('',#6441,#6446,#6448,.T.);+#6446=VERTEX_POINT('',#6447);+#6447=CARTESIAN_POINT('',(-4.044081745177,1.385,-2.22044604925E-16));+#6448=CIRCLE('',#6449,0.2);+#6449=AXIS2_PLACEMENT_3D('',#6450,#2727,#2728);+#6450=CARTESIAN_POINT('',(-4.044081745177,1.385,0.2));+#6451=ORIENTED_EDGE('',*,*,#6452,.T.);+#6452=EDGE_CURVE('',#6446,#6453,#6455,.T.);+#6453=VERTEX_POINT('',#6454);+#6454=CARTESIAN_POINT('',(-4.5,1.385,-2.22044604925E-16));+#6455=LINE('',#6447,#2702);+#6456=ORIENTED_EDGE('',*,*,#6457,.T.);+#6457=EDGE_CURVE('',#6453,#6458,#6460,.T.);+#6458=VERTEX_POINT('',#6459);+#6459=CARTESIAN_POINT('',(-4.5,1.385,1.E-01));+#6460=LINE('',#6454,#822);+#6461=ORIENTED_EDGE('',*,*,#6462,.T.);+#6462=EDGE_CURVE('',#6458,#6463,#6465,.T.);+#6463=VERTEX_POINT('',#6464);+#6464=CARTESIAN_POINT('',(-4.044081745177,1.385,1.E-01));+#6465=LINE('',#6459,#238);+#6466=ORIENTED_EDGE('',*,*,#6467,.T.);+#6467=EDGE_CURVE('',#6463,#6468,#6470,.T.);+#6468=VERTEX_POINT('',#6469);+#6469=CARTESIAN_POINT('',(-3.945600969876,1.385,0.182635182233));+#6470=CIRCLE('',#6471,1.E-01);+#6471=AXIS2_PLACEMENT_3D('',#6450,#2750,#2751);+#6472=ORIENTED_EDGE('',*,*,#6473,.T.);+#6473=EDGE_CURVE('',#6468,#6474,#6476,.T.);+#6474=VERTEX_POINT('',#6475);+#6475=CARTESIAN_POINT('',(-3.896961550602,1.385,0.484729635533));+#6476=LINE('',#6469,#2757);+#6477=ORIENTED_EDGE('',*,*,#6478,.T.);+#6478=EDGE_CURVE('',#6474,#3155,#6479,.T.);+#6479=CIRCLE('',#6480,0.2);+#6480=AXIS2_PLACEMENT_3D('',#6438,#2763,#2764);+#6481=PLANE('',#6482);+#6482=AXIS2_PLACEMENT_3D('',#6483,#846,#13);+#6483=CARTESIAN_POINT('',(-3.912728288784,1.385,0.307097536874));+#6484=ADVANCED_FACE('',(#6485),#6492,.T.);+#6485=FACE_BOUND('',#6486,.F.);+#6486=EDGE_LOOP('',(#6487,#6477,#6490,#6491));+#6487=ORIENTED_EDGE('',*,*,#6488,.T.);+#6488=EDGE_CURVE('',#6418,#6474,#6489,.T.);+#6489=LINE('',#6419,#845);+#6490=ORIENTED_EDGE('',*,*,#3154,.F.);+#6491=ORIENTED_EDGE('',*,*,#6422,.F.);+#6492=CYLINDRICAL_SURFACE('',#6493,0.2);+#6493=AXIS2_PLACEMENT_3D('',#6382,#2934,#2764);+#6494=ADVANCED_FACE('',(#6495),#6549,.F.);+#6495=FACE_BOUND('',#6496,.F.);+#6496=EDGE_LOOP('',(#6497,#6498,#6499,#6506,#6511,#6518,#6523,#6528,#6533,#6539,#6544,#6548));+#6497=ORIENTED_EDGE('',*,*,#5662,.F.);+#6498=ORIENTED_EDGE('',*,*,#5670,.T.);+#6499=ORIENTED_EDGE('',*,*,#6500,.T.);+#6500=EDGE_CURVE('',#5671,#6501,#6503,.T.);+#6501=VERTEX_POINT('',#6502);+#6502=CARTESIAN_POINT('',(-3.798480775301,1.815,0.467364817767));+#6503=CIRCLE('',#6504,0.1);+#6504=AXIS2_PLACEMENT_3D('',#6505,#2711,#2712);+#6505=CARTESIAN_POINT('',(-3.7,1.815,0.45));+#6506=ORIENTED_EDGE('',*,*,#6507,.T.);+#6507=EDGE_CURVE('',#6501,#6508,#6510,.T.);+#6508=VERTEX_POINT('',#6509);+#6509=CARTESIAN_POINT('',(-3.847120194575,1.815,0.165270364467));+#6510=LINE('',#6502,#2718);+#6511=ORIENTED_EDGE('',*,*,#6512,.T.);+#6512=EDGE_CURVE('',#6508,#6513,#6515,.T.);+#6513=VERTEX_POINT('',#6514);+#6514=CARTESIAN_POINT('',(-4.044081745177,1.815,-2.22044604925E-16));+#6515=CIRCLE('',#6516,0.2);+#6516=AXIS2_PLACEMENT_3D('',#6517,#2727,#2728);+#6517=CARTESIAN_POINT('',(-4.044081745177,1.815,0.2));+#6518=ORIENTED_EDGE('',*,*,#6519,.T.);+#6519=EDGE_CURVE('',#6513,#6520,#6522,.T.);+#6520=VERTEX_POINT('',#6521);+#6521=CARTESIAN_POINT('',(-4.5,1.815,-2.22044604925E-16));+#6522=LINE('',#6514,#2702);+#6523=ORIENTED_EDGE('',*,*,#6524,.T.);+#6524=EDGE_CURVE('',#6520,#6525,#6527,.T.);+#6525=VERTEX_POINT('',#6526);+#6526=CARTESIAN_POINT('',(-4.5,1.815,1.E-01));+#6527=LINE('',#6521,#822);+#6528=ORIENTED_EDGE('',*,*,#6529,.T.);+#6529=EDGE_CURVE('',#6525,#6530,#6532,.T.);+#6530=VERTEX_POINT('',#6531);+#6531=CARTESIAN_POINT('',(-4.044081745177,1.815,1.E-01));+#6532=LINE('',#6526,#238);+#6533=ORIENTED_EDGE('',*,*,#6534,.T.);+#6534=EDGE_CURVE('',#6530,#6535,#6537,.T.);+#6535=VERTEX_POINT('',#6536);+#6536=CARTESIAN_POINT('',(-3.945600969876,1.815,0.182635182233));+#6537=CIRCLE('',#6538,1.E-01);+#6538=AXIS2_PLACEMENT_3D('',#6517,#2750,#2751);+#6539=ORIENTED_EDGE('',*,*,#6540,.T.);+#6540=EDGE_CURVE('',#6535,#6541,#6543,.T.);+#6541=VERTEX_POINT('',#6542);+#6542=CARTESIAN_POINT('',(-3.896961550602,1.815,0.484729635533));+#6543=LINE('',#6536,#2757);+#6544=ORIENTED_EDGE('',*,*,#6545,.T.);+#6545=EDGE_CURVE('',#6541,#3187,#6546,.T.);+#6546=CIRCLE('',#6547,0.2);+#6547=AXIS2_PLACEMENT_3D('',#6505,#2763,#2764);+#6548=ORIENTED_EDGE('',*,*,#3186,.T.);+#6549=PLANE('',#6550);+#6550=AXIS2_PLACEMENT_3D('',#6551,#846,#13);+#6551=CARTESIAN_POINT('',(-3.912728288784,1.815,0.307097536874));+#6552=ADVANCED_FACE('',(#6553),#6604,.T.);+#6553=FACE_BOUND('',#6554,.T.);+#6554=EDGE_LOOP('',(#5690,#5676,#6555,#6562,#6567,#6574,#6579,#6584,#6589,#6595,#6600,#3192));+#6555=ORIENTED_EDGE('',*,*,#6556,.T.);+#6556=EDGE_CURVE('',#5678,#6557,#6559,.T.);+#6557=VERTEX_POINT('',#6558);+#6558=CARTESIAN_POINT('',(-3.798480775301,2.185,0.467364817767));+#6559=CIRCLE('',#6560,0.1);+#6560=AXIS2_PLACEMENT_3D('',#6561,#2711,#2712);+#6561=CARTESIAN_POINT('',(-3.7,2.185,0.45));+#6562=ORIENTED_EDGE('',*,*,#6563,.T.);+#6563=EDGE_CURVE('',#6557,#6564,#6566,.T.);+#6564=VERTEX_POINT('',#6565);+#6565=CARTESIAN_POINT('',(-3.847120194575,2.185,0.165270364467));+#6566=LINE('',#6558,#2718);+#6567=ORIENTED_EDGE('',*,*,#6568,.T.);+#6568=EDGE_CURVE('',#6564,#6569,#6571,.T.);+#6569=VERTEX_POINT('',#6570);+#6570=CARTESIAN_POINT('',(-4.044081745177,2.185,-2.22044604925E-16));+#6571=CIRCLE('',#6572,0.2);+#6572=AXIS2_PLACEMENT_3D('',#6573,#2727,#2728);+#6573=CARTESIAN_POINT('',(-4.044081745177,2.185,0.2));+#6574=ORIENTED_EDGE('',*,*,#6575,.T.);+#6575=EDGE_CURVE('',#6569,#6576,#6578,.T.);+#6576=VERTEX_POINT('',#6577);+#6577=CARTESIAN_POINT('',(-4.5,2.185,-2.22044604925E-16));+#6578=LINE('',#6570,#2702);+#6579=ORIENTED_EDGE('',*,*,#6580,.T.);+#6580=EDGE_CURVE('',#6576,#6581,#6583,.T.);+#6581=VERTEX_POINT('',#6582);+#6582=CARTESIAN_POINT('',(-4.5,2.185,1.E-01));+#6583=LINE('',#6577,#822);+#6584=ORIENTED_EDGE('',*,*,#6585,.T.);+#6585=EDGE_CURVE('',#6581,#6586,#6588,.T.);+#6586=VERTEX_POINT('',#6587);+#6587=CARTESIAN_POINT('',(-4.044081745177,2.185,1.E-01));+#6588=LINE('',#6582,#238);+#6589=ORIENTED_EDGE('',*,*,#6590,.T.);+#6590=EDGE_CURVE('',#6586,#6591,#6593,.T.);+#6591=VERTEX_POINT('',#6592);+#6592=CARTESIAN_POINT('',(-3.945600969876,2.185,0.182635182233));+#6593=CIRCLE('',#6594,1.E-01);+#6594=AXIS2_PLACEMENT_3D('',#6573,#2750,#2751);+#6595=ORIENTED_EDGE('',*,*,#6596,.T.);+#6596=EDGE_CURVE('',#6591,#6597,#6599,.T.);+#6597=VERTEX_POINT('',#6598);+#6598=CARTESIAN_POINT('',(-3.896961550602,2.185,0.484729635533));+#6599=LINE('',#6592,#2757);+#6600=ORIENTED_EDGE('',*,*,#6601,.T.);+#6601=EDGE_CURVE('',#6597,#3190,#6602,.T.);+#6602=CIRCLE('',#6603,0.2);+#6603=AXIS2_PLACEMENT_3D('',#6561,#2763,#2764);+#6604=PLANE('',#6605);+#6605=AXIS2_PLACEMENT_3D('',#6606,#846,#13);+#6606=CARTESIAN_POINT('',(-3.912728288784,2.185,0.307097536874));+#6607=ADVANCED_FACE('',(#6608),#6615,.T.);+#6608=FACE_BOUND('',#6609,.F.);+#6609=EDGE_LOOP('',(#6610,#6600,#6613,#6614));+#6610=ORIENTED_EDGE('',*,*,#6611,.T.);+#6611=EDGE_CURVE('',#6541,#6597,#6612,.T.);+#6612=LINE('',#6542,#845);+#6613=ORIENTED_EDGE('',*,*,#3189,.F.);+#6614=ORIENTED_EDGE('',*,*,#6545,.F.);+#6615=CYLINDRICAL_SURFACE('',#6616,0.2);+#6616=AXIS2_PLACEMENT_3D('',#6505,#2934,#2764);+#6617=ADVANCED_FACE('',(#6618),#6625,.F.);+#6618=FACE_BOUND('',#6619,.F.);+#6619=EDGE_LOOP('',(#6620,#4071,#6623,#6624));+#6620=ORIENTED_EDGE('',*,*,#6621,.T.);+#6621=EDGE_CURVE('',#3995,#4067,#6622,.T.);+#6622=LINE('',#3996,#537);+#6623=ORIENTED_EDGE('',*,*,#4087,.F.);+#6624=ORIENTED_EDGE('',*,*,#4001,.F.);+#6625=PLANE('',#6626);+#6626=AXIS2_PLACEMENT_3D('',#3996,#6627,#4006);+#6627=DIRECTION('',(-0.987285005229,-1.096106544673E-16,-0.158960115908));+#6628=ADVANCED_FACE('',(#6629),#6636,.F.);+#6629=FACE_BOUND('',#6630,.F.);+#6630=EDGE_LOOP('',(#6631,#4065,#6634,#6635));+#6631=ORIENTED_EDGE('',*,*,#6632,.T.);+#6632=EDGE_CURVE('',#3990,#4062,#6633,.T.);+#6633=LINE('',#3991,#537);+#6634=ORIENTED_EDGE('',*,*,#6621,.F.);+#6635=ORIENTED_EDGE('',*,*,#3994,.F.);+#6636=CYLINDRICAL_SURFACE('',#3998,1.E-01);+#6637=ADVANCED_FACE('',(#6638),#6645,.F.);+#6638=FACE_BOUND('',#6639,.F.);+#6639=EDGE_LOOP('',(#6640,#4060,#6643,#6644));+#6640=ORIENTED_EDGE('',*,*,#6641,.T.);+#6641=EDGE_CURVE('',#3985,#4057,#6642,.T.);+#6642=LINE('',#3986,#537);+#6643=ORIENTED_EDGE('',*,*,#6632,.F.);+#6644=ORIENTED_EDGE('',*,*,#3989,.F.);+#6645=PLANE('',#6646);+#6646=AXIS2_PLACEMENT_3D('',#3986,#273,#546);+#6647=ADVANCED_FACE('',(#6648),#6655,.F.);+#6648=FACE_BOUND('',#6649,.F.);+#6649=EDGE_LOOP('',(#6650,#4055,#6653,#6654));+#6650=ORIENTED_EDGE('',*,*,#6651,.T.);+#6651=EDGE_CURVE('',#3980,#4052,#6652,.T.);+#6652=LINE('',#3981,#537);+#6653=ORIENTED_EDGE('',*,*,#6641,.F.);+#6654=ORIENTED_EDGE('',*,*,#3984,.F.);+#6655=PLANE('',#6656);+#6656=AXIS2_PLACEMENT_3D('',#3981,#546,#13);+#6657=ADVANCED_FACE('',(#6658),#6665,.F.);+#6658=FACE_BOUND('',#6659,.F.);+#6659=EDGE_LOOP('',(#6660,#4050,#6663,#6664));+#6660=ORIENTED_EDGE('',*,*,#6661,.T.);+#6661=EDGE_CURVE('',#3972,#4045,#6662,.T.);+#6662=LINE('',#3973,#537);+#6663=ORIENTED_EDGE('',*,*,#6651,.F.);+#6664=ORIENTED_EDGE('',*,*,#3979,.F.);+#6665=PLANE('',#6666);+#6666=AXIS2_PLACEMENT_3D('',#3973,#13,#50);+#6667=ADVANCED_FACE('',(#6668),#6675,.T.);+#6668=FACE_BOUND('',#6669,.F.);+#6669=EDGE_LOOP('',(#6670,#4043,#6673,#6674));+#6670=ORIENTED_EDGE('',*,*,#6671,.T.);+#6671=EDGE_CURVE('',#3965,#4040,#6672,.T.);+#6672=LINE('',#3966,#537);+#6673=ORIENTED_EDGE('',*,*,#6661,.F.);+#6674=ORIENTED_EDGE('',*,*,#3971,.F.);+#6675=CYLINDRICAL_SURFACE('',#6676,0.2);+#6676=AXIS2_PLACEMENT_3D('',#3976,#231,#3977);+#6677=ADVANCED_FACE('',(#6678),#6685,.F.);+#6678=FACE_BOUND('',#6679,.F.);+#6679=EDGE_LOOP('',(#6680,#4038,#6683,#6684));+#6680=ORIENTED_EDGE('',*,*,#6681,.T.);+#6681=EDGE_CURVE('',#3957,#4033,#6682,.T.);+#6682=LINE('',#3958,#537);+#6683=ORIENTED_EDGE('',*,*,#6671,.F.);+#6684=ORIENTED_EDGE('',*,*,#3964,.F.);+#6685=PLANE('',#6686);+#6686=AXIS2_PLACEMENT_3D('',#3958,#6687,#3969);+#6687=DIRECTION('',(0.987285005229,1.096106544673E-16,0.158960115908));+#6688=ADVANCED_FACE('',(#6689),#6696,.F.);+#6689=FACE_BOUND('',#6690,.F.);+#6690=EDGE_LOOP('',(#6691,#4031,#6694,#6695));+#6691=ORIENTED_EDGE('',*,*,#6692,.T.);+#6692=EDGE_CURVE('',#3951,#4027,#6693,.T.);+#6693=LINE('',#3952,#537);+#6694=ORIENTED_EDGE('',*,*,#6681,.F.);+#6695=ORIENTED_EDGE('',*,*,#3956,.F.);+#6696=CYLINDRICAL_SURFACE('',#3960,0.1);+#6697=ADVANCED_FACE('',(#6698),#6703,.F.);+#6698=FACE_BOUND('',#6699,.F.);+#6699=EDGE_LOOP('',(#6700,#6701,#4025,#6702));+#6700=ORIENTED_EDGE('',*,*,#3950,.F.);+#6701=ORIENTED_EDGE('',*,*,#4167,.T.);+#6702=ORIENTED_EDGE('',*,*,#6692,.F.);+#6703=PLANE('',#6704);+#6704=AXIS2_PLACEMENT_3D('',#3954,#13,#50);+#6705=ADVANCED_FACE('',(#6706),#6713,.F.);+#6706=FACE_BOUND('',#6707,.F.);+#6707=EDGE_LOOP('',(#5344,#6708,#6711,#6712));+#6708=ORIENTED_EDGE('',*,*,#6709,.T.);+#6709=EDGE_CURVE('',#5346,#5307,#6710,.T.);+#6710=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5347,#5308),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6711=ORIENTED_EDGE('',*,*,#5326,.F.);+#6712=ORIENTED_EDGE('',*,*,#4104,.F.);+#6713=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4101,#4106),(#5347,#5308)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6714=ADVANCED_FACE('',(#6715),#6722,.F.);+#6715=FACE_BOUND('',#6716,.F.);+#6716=EDGE_LOOP('',(#6717,#6718,#4328,#6719));+#6717=ORIENTED_EDGE('',*,*,#4263,.F.);+#6718=ORIENTED_EDGE('',*,*,#4161,.T.);+#6719=ORIENTED_EDGE('',*,*,#6720,.F.);+#6720=EDGE_CURVE('',#4264,#4330,#6721,.T.);+#6721=LINE('',#4265,#537);+#6722=PLANE('',#6723);+#6723=AXIS2_PLACEMENT_3D('',#4267,#13,#50);+#6724=ADVANCED_FACE('',(#6725),#6732,.F.);+#6725=FACE_BOUND('',#6726,.F.);+#6726=EDGE_LOOP('',(#6727,#6728,#4475,#6729));+#6727=ORIENTED_EDGE('',*,*,#4410,.F.);+#6728=ORIENTED_EDGE('',*,*,#4153,.T.);+#6729=ORIENTED_EDGE('',*,*,#6730,.F.);+#6730=EDGE_CURVE('',#4411,#4477,#6731,.T.);+#6731=LINE('',#4412,#537);+#6732=PLANE('',#6733);+#6733=AXIS2_PLACEMENT_3D('',#4414,#13,#50);+#6734=ADVANCED_FACE('',(#6735),#6742,.F.);+#6735=FACE_BOUND('',#6736,.F.);+#6736=EDGE_LOOP('',(#6737,#6738,#4622,#6739));+#6737=ORIENTED_EDGE('',*,*,#4557,.F.);+#6738=ORIENTED_EDGE('',*,*,#4145,.T.);+#6739=ORIENTED_EDGE('',*,*,#6740,.F.);+#6740=EDGE_CURVE('',#4558,#4624,#6741,.T.);+#6741=LINE('',#4559,#537);+#6742=PLANE('',#6743);+#6743=AXIS2_PLACEMENT_3D('',#4561,#13,#50);+#6744=ADVANCED_FACE('',(#6745),#6752,.F.);+#6745=FACE_BOUND('',#6746,.F.);+#6746=EDGE_LOOP('',(#6747,#6748,#4769,#6749));+#6747=ORIENTED_EDGE('',*,*,#4704,.F.);+#6748=ORIENTED_EDGE('',*,*,#4137,.T.);+#6749=ORIENTED_EDGE('',*,*,#6750,.F.);+#6750=EDGE_CURVE('',#4705,#4771,#6751,.T.);+#6751=LINE('',#4706,#537);+#6752=PLANE('',#6753);+#6753=AXIS2_PLACEMENT_3D('',#4708,#13,#50);+#6754=ADVANCED_FACE('',(#6755),#6762,.F.);+#6755=FACE_BOUND('',#6756,.F.);+#6756=EDGE_LOOP('',(#6757,#6758,#4916,#6759));+#6757=ORIENTED_EDGE('',*,*,#4851,.F.);+#6758=ORIENTED_EDGE('',*,*,#4129,.T.);+#6759=ORIENTED_EDGE('',*,*,#6760,.F.);+#6760=EDGE_CURVE('',#4852,#4918,#6761,.T.);+#6761=LINE('',#4853,#537);+#6762=PLANE('',#6763);+#6763=AXIS2_PLACEMENT_3D('',#4855,#13,#50);+#6764=ADVANCED_FACE('',(#6765),#6772,.F.);+#6765=FACE_BOUND('',#6766,.F.);+#6766=EDGE_LOOP('',(#6767,#6768,#5063,#6769));+#6767=ORIENTED_EDGE('',*,*,#4998,.F.);+#6768=ORIENTED_EDGE('',*,*,#4121,.T.);+#6769=ORIENTED_EDGE('',*,*,#6770,.F.);+#6770=EDGE_CURVE('',#4999,#5065,#6771,.T.);+#6771=LINE('',#5000,#537);+#6772=PLANE('',#6773);+#6773=AXIS2_PLACEMENT_3D('',#5002,#13,#50);+#6774=ADVANCED_FACE('',(#6775),#6782,.F.);+#6775=FACE_BOUND('',#6776,.F.);+#6776=EDGE_LOOP('',(#6777,#6778,#5210,#6779));+#6777=ORIENTED_EDGE('',*,*,#5145,.F.);+#6778=ORIENTED_EDGE('',*,*,#4113,.T.);+#6779=ORIENTED_EDGE('',*,*,#6780,.F.);+#6780=EDGE_CURVE('',#5146,#5212,#6781,.T.);+#6781=LINE('',#5147,#537);+#6782=PLANE('',#6783);+#6783=AXIS2_PLACEMENT_3D('',#5149,#13,#50);+#6784=ADVANCED_FACE('',(#6785),#244,.F.);+#6785=FACE_BOUND('',#6786,.F.);+#6786=EDGE_LOOP('',(#6787,#6791,#6795,#6796));+#6787=ORIENTED_EDGE('',*,*,#6788,.T.);+#6788=EDGE_CURVE('',#5293,#6789,#2549,.T.);+#6789=VERTEX_POINT('',#6790);+#6790=CARTESIAN_POINT('',(2.185,-3.5,0.65));+#6791=ORIENTED_EDGE('',*,*,#6792,.T.);+#6792=EDGE_CURVE('',#6789,#4195,#6793,.T.);+#6793=LINE('',#6794,#2556);+#6794=CARTESIAN_POINT('',(2.185,-3.7,0.65));+#6795=ORIENTED_EDGE('',*,*,#4194,.F.);+#6796=ORIENTED_EDGE('',*,*,#5297,.F.);+#6797=ADVANCED_FACE('',(#6798),#6817,.F.);+#6798=FACE_BOUND('',#6799,.F.);+#6799=EDGE_LOOP('',(#6800,#6803,#6808,#6813,#6815,#6816));+#6800=ORIENTED_EDGE('',*,*,#6801,.F.);+#6801=EDGE_CURVE('',#6802,#6789,#6793,.T.);+#6802=VERTEX_POINT('',#6794);+#6803=ORIENTED_EDGE('',*,*,#6804,.T.);+#6804=EDGE_CURVE('',#6802,#6805,#6807,.T.);+#6805=VERTEX_POINT('',#6806);+#6806=CARTESIAN_POINT('',(1.815,-3.7,0.65));+#6807=LINE('',#6794,#5289);+#6808=ORIENTED_EDGE('',*,*,#6809,.T.);+#6809=EDGE_CURVE('',#6805,#6810,#6812,.T.);+#6810=VERTEX_POINT('',#6811);+#6811=CARTESIAN_POINT('',(1.815,-3.5,0.65));+#6812=LINE('',#6806,#2556);+#6813=ORIENTED_EDGE('',*,*,#6814,.T.);+#6814=EDGE_CURVE('',#6810,#4199,#6812,.T.);+#6815=ORIENTED_EDGE('',*,*,#4198,.F.);+#6816=ORIENTED_EDGE('',*,*,#6792,.F.);+#6817=PLANE('',#6818);+#6818=AXIS2_PLACEMENT_3D('',#6794,#273,#2557);+#6819=ADVANCED_FACE('',(#6820),#244,.F.);+#6820=FACE_BOUND('',#6821,.F.);+#6821=EDGE_LOOP('',(#6822,#6826,#6830,#6831));+#6822=ORIENTED_EDGE('',*,*,#6823,.T.);+#6823=EDGE_CURVE('',#6810,#6824,#2549,.T.);+#6824=VERTEX_POINT('',#6825);+#6825=CARTESIAN_POINT('',(1.385,-3.5,0.65));+#6826=ORIENTED_EDGE('',*,*,#6827,.T.);+#6827=EDGE_CURVE('',#6824,#4203,#6828,.T.);+#6828=LINE('',#6829,#2556);+#6829=CARTESIAN_POINT('',(1.385,-3.7,0.65));+#6830=ORIENTED_EDGE('',*,*,#4202,.F.);+#6831=ORIENTED_EDGE('',*,*,#6814,.F.);+#6832=ADVANCED_FACE('',(#6833),#6852,.F.);+#6833=FACE_BOUND('',#6834,.F.);+#6834=EDGE_LOOP('',(#6835,#6838,#6843,#6848,#6850,#6851));+#6835=ORIENTED_EDGE('',*,*,#6836,.F.);+#6836=EDGE_CURVE('',#6837,#6824,#6828,.T.);+#6837=VERTEX_POINT('',#6829);+#6838=ORIENTED_EDGE('',*,*,#6839,.T.);+#6839=EDGE_CURVE('',#6837,#6840,#6842,.T.);+#6840=VERTEX_POINT('',#6841);+#6841=CARTESIAN_POINT('',(1.015,-3.7,0.65));+#6842=LINE('',#6829,#5289);+#6843=ORIENTED_EDGE('',*,*,#6844,.T.);+#6844=EDGE_CURVE('',#6840,#6845,#6847,.T.);+#6845=VERTEX_POINT('',#6846);+#6846=CARTESIAN_POINT('',(1.015,-3.5,0.65));+#6847=LINE('',#6841,#2556);+#6848=ORIENTED_EDGE('',*,*,#6849,.T.);+#6849=EDGE_CURVE('',#6845,#4207,#6847,.T.);+#6850=ORIENTED_EDGE('',*,*,#4206,.F.);+#6851=ORIENTED_EDGE('',*,*,#6827,.F.);+#6852=PLANE('',#6853);+#6853=AXIS2_PLACEMENT_3D('',#6829,#273,#2557);+#6854=ADVANCED_FACE('',(#6855),#244,.F.);+#6855=FACE_BOUND('',#6856,.F.);+#6856=EDGE_LOOP('',(#6857,#6861,#6865,#6866));+#6857=ORIENTED_EDGE('',*,*,#6858,.T.);+#6858=EDGE_CURVE('',#6845,#6859,#2549,.T.);+#6859=VERTEX_POINT('',#6860);+#6860=CARTESIAN_POINT('',(0.585,-3.5,0.65));+#6861=ORIENTED_EDGE('',*,*,#6862,.T.);+#6862=EDGE_CURVE('',#6859,#4211,#6863,.T.);+#6863=LINE('',#6864,#2556);+#6864=CARTESIAN_POINT('',(0.585,-3.7,0.65));+#6865=ORIENTED_EDGE('',*,*,#4210,.F.);+#6866=ORIENTED_EDGE('',*,*,#6849,.F.);+#6867=ADVANCED_FACE('',(#6868),#6887,.F.);+#6868=FACE_BOUND('',#6869,.F.);+#6869=EDGE_LOOP('',(#6870,#6873,#6878,#6883,#6885,#6886));+#6870=ORIENTED_EDGE('',*,*,#6871,.F.);+#6871=EDGE_CURVE('',#6872,#6859,#6863,.T.);+#6872=VERTEX_POINT('',#6864);+#6873=ORIENTED_EDGE('',*,*,#6874,.T.);+#6874=EDGE_CURVE('',#6872,#6875,#6877,.T.);+#6875=VERTEX_POINT('',#6876);+#6876=CARTESIAN_POINT('',(0.215,-3.7,0.65));+#6877=LINE('',#6864,#5289);+#6878=ORIENTED_EDGE('',*,*,#6879,.T.);+#6879=EDGE_CURVE('',#6875,#6880,#6882,.T.);+#6880=VERTEX_POINT('',#6881);+#6881=CARTESIAN_POINT('',(0.215,-3.5,0.65));+#6882=LINE('',#6876,#2556);+#6883=ORIENTED_EDGE('',*,*,#6884,.T.);+#6884=EDGE_CURVE('',#6880,#4215,#6882,.T.);+#6885=ORIENTED_EDGE('',*,*,#4214,.F.);+#6886=ORIENTED_EDGE('',*,*,#6862,.F.);+#6887=PLANE('',#6888);+#6888=AXIS2_PLACEMENT_3D('',#6864,#273,#2557);+#6889=ADVANCED_FACE('',(#6890),#244,.F.);+#6890=FACE_BOUND('',#6891,.F.);+#6891=EDGE_LOOP('',(#6892,#6896,#6900,#6901));+#6892=ORIENTED_EDGE('',*,*,#6893,.T.);+#6893=EDGE_CURVE('',#6880,#6894,#2549,.T.);+#6894=VERTEX_POINT('',#6895);+#6895=CARTESIAN_POINT('',(-0.215,-3.5,0.65));+#6896=ORIENTED_EDGE('',*,*,#6897,.T.);+#6897=EDGE_CURVE('',#6894,#4219,#6898,.T.);+#6898=LINE('',#6899,#2556);+#6899=CARTESIAN_POINT('',(-0.215,-3.7,0.65));+#6900=ORIENTED_EDGE('',*,*,#4218,.F.);+#6901=ORIENTED_EDGE('',*,*,#6884,.F.);+#6902=ADVANCED_FACE('',(#6903),#6922,.F.);+#6903=FACE_BOUND('',#6904,.F.);+#6904=EDGE_LOOP('',(#6905,#6908,#6913,#6918,#6920,#6921));+#6905=ORIENTED_EDGE('',*,*,#6906,.F.);+#6906=EDGE_CURVE('',#6907,#6894,#6898,.T.);+#6907=VERTEX_POINT('',#6899);+#6908=ORIENTED_EDGE('',*,*,#6909,.T.);+#6909=EDGE_CURVE('',#6907,#6910,#6912,.T.);+#6910=VERTEX_POINT('',#6911);+#6911=CARTESIAN_POINT('',(-0.585,-3.7,0.65));+#6912=LINE('',#6899,#5289);+#6913=ORIENTED_EDGE('',*,*,#6914,.T.);+#6914=EDGE_CURVE('',#6910,#6915,#6917,.T.);+#6915=VERTEX_POINT('',#6916);+#6916=CARTESIAN_POINT('',(-0.585,-3.5,0.65));+#6917=LINE('',#6911,#2556);+#6918=ORIENTED_EDGE('',*,*,#6919,.T.);+#6919=EDGE_CURVE('',#6915,#4223,#6917,.T.);+#6920=ORIENTED_EDGE('',*,*,#4222,.F.);+#6921=ORIENTED_EDGE('',*,*,#6897,.F.);+#6922=PLANE('',#6923);+#6923=AXIS2_PLACEMENT_3D('',#6899,#273,#2557);+#6924=ADVANCED_FACE('',(#6925),#244,.F.);+#6925=FACE_BOUND('',#6926,.F.);+#6926=EDGE_LOOP('',(#6927,#6931,#6935,#6936));+#6927=ORIENTED_EDGE('',*,*,#6928,.T.);+#6928=EDGE_CURVE('',#6915,#6929,#2549,.T.);+#6929=VERTEX_POINT('',#6930);+#6930=CARTESIAN_POINT('',(-1.015,-3.5,0.65));+#6931=ORIENTED_EDGE('',*,*,#6932,.T.);+#6932=EDGE_CURVE('',#6929,#4227,#6933,.T.);+#6933=LINE('',#6934,#2556);+#6934=CARTESIAN_POINT('',(-1.015,-3.7,0.65));+#6935=ORIENTED_EDGE('',*,*,#4226,.F.);+#6936=ORIENTED_EDGE('',*,*,#6919,.F.);+#6937=ADVANCED_FACE('',(#6938),#6957,.F.);+#6938=FACE_BOUND('',#6939,.F.);+#6939=EDGE_LOOP('',(#6940,#6943,#6948,#6953,#6955,#6956));+#6940=ORIENTED_EDGE('',*,*,#6941,.F.);+#6941=EDGE_CURVE('',#6942,#6929,#6933,.T.);+#6942=VERTEX_POINT('',#6934);+#6943=ORIENTED_EDGE('',*,*,#6944,.T.);+#6944=EDGE_CURVE('',#6942,#6945,#6947,.T.);+#6945=VERTEX_POINT('',#6946);+#6946=CARTESIAN_POINT('',(-1.385,-3.7,0.65));+#6947=LINE('',#6934,#5289);+#6948=ORIENTED_EDGE('',*,*,#6949,.T.);+#6949=EDGE_CURVE('',#6945,#6950,#6952,.T.);+#6950=VERTEX_POINT('',#6951);+#6951=CARTESIAN_POINT('',(-1.385,-3.5,0.65));+#6952=LINE('',#6946,#2556);+#6953=ORIENTED_EDGE('',*,*,#6954,.T.);+#6954=EDGE_CURVE('',#6950,#4231,#6952,.T.);+#6955=ORIENTED_EDGE('',*,*,#4230,.F.);+#6956=ORIENTED_EDGE('',*,*,#6932,.F.);+#6957=PLANE('',#6958);+#6958=AXIS2_PLACEMENT_3D('',#6934,#273,#2557);+#6959=ADVANCED_FACE('',(#6960),#244,.F.);+#6960=FACE_BOUND('',#6961,.F.);+#6961=EDGE_LOOP('',(#6962,#6966,#6970,#6971));+#6962=ORIENTED_EDGE('',*,*,#6963,.T.);+#6963=EDGE_CURVE('',#6950,#6964,#2549,.T.);+#6964=VERTEX_POINT('',#6965);+#6965=CARTESIAN_POINT('',(-1.815,-3.5,0.65));+#6966=ORIENTED_EDGE('',*,*,#6967,.T.);+#6967=EDGE_CURVE('',#6964,#4235,#6968,.T.);+#6968=LINE('',#6969,#2556);+#6969=CARTESIAN_POINT('',(-1.815,-3.7,0.65));+#6970=ORIENTED_EDGE('',*,*,#4234,.F.);+#6971=ORIENTED_EDGE('',*,*,#6954,.F.);+#6972=ADVANCED_FACE('',(#6973),#6992,.F.);+#6973=FACE_BOUND('',#6974,.F.);+#6974=EDGE_LOOP('',(#6975,#6978,#6983,#6988,#6990,#6991));+#6975=ORIENTED_EDGE('',*,*,#6976,.F.);+#6976=EDGE_CURVE('',#6977,#6964,#6968,.T.);+#6977=VERTEX_POINT('',#6969);+#6978=ORIENTED_EDGE('',*,*,#6979,.T.);+#6979=EDGE_CURVE('',#6977,#6980,#6982,.T.);+#6980=VERTEX_POINT('',#6981);+#6981=CARTESIAN_POINT('',(-2.185,-3.7,0.65));+#6982=LINE('',#6969,#5289);+#6983=ORIENTED_EDGE('',*,*,#6984,.T.);+#6984=EDGE_CURVE('',#6980,#6985,#6987,.T.);+#6985=VERTEX_POINT('',#6986);+#6986=CARTESIAN_POINT('',(-2.185,-3.5,0.65));+#6987=LINE('',#6981,#2556);+#6988=ORIENTED_EDGE('',*,*,#6989,.T.);+#6989=EDGE_CURVE('',#6985,#4239,#6987,.T.);+#6990=ORIENTED_EDGE('',*,*,#4238,.F.);+#6991=ORIENTED_EDGE('',*,*,#6967,.F.);+#6992=PLANE('',#6993);+#6993=AXIS2_PLACEMENT_3D('',#6969,#273,#2557);+#6994=ADVANCED_FACE('',(#6995),#244,.F.);+#6995=FACE_BOUND('',#6996,.F.);+#6996=EDGE_LOOP('',(#6997,#6999,#7000,#7001));+#6997=ORIENTED_EDGE('',*,*,#6998,.T.);+#6998=EDGE_CURVE('',#6985,#5741,#2549,.T.);+#6999=ORIENTED_EDGE('',*,*,#5753,.T.);+#7000=ORIENTED_EDGE('',*,*,#4242,.F.);+#7001=ORIENTED_EDGE('',*,*,#6989,.F.);+#7002=ADVANCED_FACE('',(#7003),#7010,.F.);+#7003=FACE_BOUND('',#7004,.F.);+#7004=EDGE_LOOP('',(#7005,#4374,#7008,#7009));+#7005=ORIENTED_EDGE('',*,*,#7006,.T.);+#7006=EDGE_CURVE('',#4304,#4370,#7007,.T.);+#7007=LINE('',#4305,#537);+#7008=ORIENTED_EDGE('',*,*,#4390,.F.);+#7009=ORIENTED_EDGE('',*,*,#4309,.F.);+#7010=PLANE('',#7011);+#7011=AXIS2_PLACEMENT_3D('',#4305,#6627,#4006);+#7012=ADVANCED_FACE('',(#7013),#7020,.F.);+#7013=FACE_BOUND('',#7014,.F.);+#7014=EDGE_LOOP('',(#7015,#4368,#7018,#7019));+#7015=ORIENTED_EDGE('',*,*,#7016,.T.);+#7016=EDGE_CURVE('',#4299,#4365,#7017,.T.);+#7017=LINE('',#4300,#537);+#7018=ORIENTED_EDGE('',*,*,#7006,.F.);+#7019=ORIENTED_EDGE('',*,*,#4303,.F.);+#7020=CYLINDRICAL_SURFACE('',#4307,1.E-01);+#7021=ADVANCED_FACE('',(#7022),#7029,.F.);+#7022=FACE_BOUND('',#7023,.F.);+#7023=EDGE_LOOP('',(#7024,#4363,#7027,#7028));+#7024=ORIENTED_EDGE('',*,*,#7025,.T.);+#7025=EDGE_CURVE('',#4294,#4360,#7026,.T.);+#7026=LINE('',#4295,#537);+#7027=ORIENTED_EDGE('',*,*,#7016,.F.);+#7028=ORIENTED_EDGE('',*,*,#4298,.F.);+#7029=PLANE('',#7030);+#7030=AXIS2_PLACEMENT_3D('',#4295,#273,#546);+#7031=ADVANCED_FACE('',(#7032),#7039,.F.);+#7032=FACE_BOUND('',#7033,.F.);+#7033=EDGE_LOOP('',(#7034,#4358,#7037,#7038));+#7034=ORIENTED_EDGE('',*,*,#7035,.T.);+#7035=EDGE_CURVE('',#4289,#4355,#7036,.T.);+#7036=LINE('',#4290,#537);+#7037=ORIENTED_EDGE('',*,*,#7025,.F.);+#7038=ORIENTED_EDGE('',*,*,#4293,.F.);+#7039=PLANE('',#7040);+#7040=AXIS2_PLACEMENT_3D('',#4290,#546,#13);+#7041=ADVANCED_FACE('',(#7042),#7049,.F.);+#7042=FACE_BOUND('',#7043,.F.);+#7043=EDGE_LOOP('',(#7044,#4353,#7047,#7048));+#7044=ORIENTED_EDGE('',*,*,#7045,.T.);+#7045=EDGE_CURVE('',#4282,#4348,#7046,.T.);+#7046=LINE('',#4283,#537);+#7047=ORIENTED_EDGE('',*,*,#7035,.F.);+#7048=ORIENTED_EDGE('',*,*,#4288,.F.);+#7049=PLANE('',#7050);+#7050=AXIS2_PLACEMENT_3D('',#4283,#13,#50);+#7051=ADVANCED_FACE('',(#7052),#7059,.T.);+#7052=FACE_BOUND('',#7053,.F.);+#7053=EDGE_LOOP('',(#7054,#4346,#7057,#7058));+#7054=ORIENTED_EDGE('',*,*,#7055,.T.);+#7055=EDGE_CURVE('',#4277,#4343,#7056,.T.);+#7056=LINE('',#4278,#537);+#7057=ORIENTED_EDGE('',*,*,#7045,.F.);+#7058=ORIENTED_EDGE('',*,*,#4281,.F.);+#7059=CYLINDRICAL_SURFACE('',#7060,0.2);+#7060=AXIS2_PLACEMENT_3D('',#4286,#231,#3977);+#7061=ADVANCED_FACE('',(#7062),#7069,.F.);+#7062=FACE_BOUND('',#7063,.F.);+#7063=EDGE_LOOP('',(#7064,#4341,#7067,#7068));+#7064=ORIENTED_EDGE('',*,*,#7065,.T.);+#7065=EDGE_CURVE('',#4270,#4336,#7066,.T.);+#7066=LINE('',#4271,#537);+#7067=ORIENTED_EDGE('',*,*,#7055,.F.);+#7068=ORIENTED_EDGE('',*,*,#4276,.F.);+#7069=PLANE('',#7070);+#7070=AXIS2_PLACEMENT_3D('',#4271,#6687,#3969);+#7071=ADVANCED_FACE('',(#7072),#7077,.F.);+#7072=FACE_BOUND('',#7073,.F.);+#7073=EDGE_LOOP('',(#7074,#4334,#7075,#7076));+#7074=ORIENTED_EDGE('',*,*,#6720,.T.);+#7075=ORIENTED_EDGE('',*,*,#7065,.F.);+#7076=ORIENTED_EDGE('',*,*,#4269,.F.);+#7077=CYLINDRICAL_SURFACE('',#4273,0.1);+#7078=ADVANCED_FACE('',(#7079),#7086,.F.);+#7079=FACE_BOUND('',#7080,.F.);+#7080=EDGE_LOOP('',(#7081,#4521,#7084,#7085));+#7081=ORIENTED_EDGE('',*,*,#7082,.T.);+#7082=EDGE_CURVE('',#4451,#4517,#7083,.T.);+#7083=LINE('',#4452,#537);+#7084=ORIENTED_EDGE('',*,*,#4537,.F.);+#7085=ORIENTED_EDGE('',*,*,#4456,.F.);+#7086=PLANE('',#7087);+#7087=AXIS2_PLACEMENT_3D('',#4452,#6627,#4006);+#7088=ADVANCED_FACE('',(#7089),#7096,.F.);+#7089=FACE_BOUND('',#7090,.F.);+#7090=EDGE_LOOP('',(#7091,#4515,#7094,#7095));+#7091=ORIENTED_EDGE('',*,*,#7092,.T.);+#7092=EDGE_CURVE('',#4446,#4512,#7093,.T.);+#7093=LINE('',#4447,#537);+#7094=ORIENTED_EDGE('',*,*,#7082,.F.);+#7095=ORIENTED_EDGE('',*,*,#4450,.F.);+#7096=CYLINDRICAL_SURFACE('',#4454,1.E-01);+#7097=ADVANCED_FACE('',(#7098),#7105,.F.);+#7098=FACE_BOUND('',#7099,.F.);+#7099=EDGE_LOOP('',(#7100,#4510,#7103,#7104));+#7100=ORIENTED_EDGE('',*,*,#7101,.T.);+#7101=EDGE_CURVE('',#4441,#4507,#7102,.T.);+#7102=LINE('',#4442,#537);+#7103=ORIENTED_EDGE('',*,*,#7092,.F.);+#7104=ORIENTED_EDGE('',*,*,#4445,.F.);+#7105=PLANE('',#7106);+#7106=AXIS2_PLACEMENT_3D('',#4442,#273,#546);+#7107=ADVANCED_FACE('',(#7108),#7115,.F.);+#7108=FACE_BOUND('',#7109,.F.);+#7109=EDGE_LOOP('',(#7110,#4505,#7113,#7114));+#7110=ORIENTED_EDGE('',*,*,#7111,.T.);+#7111=EDGE_CURVE('',#4436,#4502,#7112,.T.);+#7112=LINE('',#4437,#537);+#7113=ORIENTED_EDGE('',*,*,#7101,.F.);+#7114=ORIENTED_EDGE('',*,*,#4440,.F.);+#7115=PLANE('',#7116);+#7116=AXIS2_PLACEMENT_3D('',#4437,#546,#13);+#7117=ADVANCED_FACE('',(#7118),#7125,.F.);+#7118=FACE_BOUND('',#7119,.F.);+#7119=EDGE_LOOP('',(#7120,#4500,#7123,#7124));+#7120=ORIENTED_EDGE('',*,*,#7121,.T.);+#7121=EDGE_CURVE('',#4429,#4495,#7122,.T.);+#7122=LINE('',#4430,#537);+#7123=ORIENTED_EDGE('',*,*,#7111,.F.);+#7124=ORIENTED_EDGE('',*,*,#4435,.F.);+#7125=PLANE('',#7126);+#7126=AXIS2_PLACEMENT_3D('',#4430,#13,#50);+#7127=ADVANCED_FACE('',(#7128),#7135,.T.);+#7128=FACE_BOUND('',#7129,.F.);+#7129=EDGE_LOOP('',(#7130,#4493,#7133,#7134));+#7130=ORIENTED_EDGE('',*,*,#7131,.T.);+#7131=EDGE_CURVE('',#4424,#4490,#7132,.T.);+#7132=LINE('',#4425,#537);+#7133=ORIENTED_EDGE('',*,*,#7121,.F.);+#7134=ORIENTED_EDGE('',*,*,#4428,.F.);+#7135=CYLINDRICAL_SURFACE('',#7136,0.2);+#7136=AXIS2_PLACEMENT_3D('',#4433,#231,#3977);+#7137=ADVANCED_FACE('',(#7138),#7145,.F.);+#7138=FACE_BOUND('',#7139,.F.);+#7139=EDGE_LOOP('',(#7140,#4488,#7143,#7144));+#7140=ORIENTED_EDGE('',*,*,#7141,.T.);+#7141=EDGE_CURVE('',#4417,#4483,#7142,.T.);+#7142=LINE('',#4418,#537);+#7143=ORIENTED_EDGE('',*,*,#7131,.F.);+#7144=ORIENTED_EDGE('',*,*,#4423,.F.);+#7145=PLANE('',#7146);+#7146=AXIS2_PLACEMENT_3D('',#4418,#6687,#3969);+#7147=ADVANCED_FACE('',(#7148),#7153,.F.);+#7148=FACE_BOUND('',#7149,.F.);+#7149=EDGE_LOOP('',(#7150,#4481,#7151,#7152));+#7150=ORIENTED_EDGE('',*,*,#6730,.T.);+#7151=ORIENTED_EDGE('',*,*,#7141,.F.);+#7152=ORIENTED_EDGE('',*,*,#4416,.F.);+#7153=CYLINDRICAL_SURFACE('',#4420,0.1);+#7154=ADVANCED_FACE('',(#7155),#7162,.F.);+#7155=FACE_BOUND('',#7156,.F.);+#7156=EDGE_LOOP('',(#7157,#4668,#7160,#7161));+#7157=ORIENTED_EDGE('',*,*,#7158,.T.);+#7158=EDGE_CURVE('',#4598,#4664,#7159,.T.);+#7159=LINE('',#4599,#537);+#7160=ORIENTED_EDGE('',*,*,#4684,.F.);+#7161=ORIENTED_EDGE('',*,*,#4603,.F.);+#7162=PLANE('',#7163);+#7163=AXIS2_PLACEMENT_3D('',#4599,#6627,#4006);+#7164=ADVANCED_FACE('',(#7165),#7172,.F.);+#7165=FACE_BOUND('',#7166,.F.);+#7166=EDGE_LOOP('',(#7167,#4662,#7170,#7171));+#7167=ORIENTED_EDGE('',*,*,#7168,.T.);+#7168=EDGE_CURVE('',#4593,#4659,#7169,.T.);+#7169=LINE('',#4594,#537);+#7170=ORIENTED_EDGE('',*,*,#7158,.F.);+#7171=ORIENTED_EDGE('',*,*,#4597,.F.);+#7172=CYLINDRICAL_SURFACE('',#4601,1.E-01);+#7173=ADVANCED_FACE('',(#7174),#7181,.F.);+#7174=FACE_BOUND('',#7175,.F.);+#7175=EDGE_LOOP('',(#7176,#4657,#7179,#7180));+#7176=ORIENTED_EDGE('',*,*,#7177,.T.);+#7177=EDGE_CURVE('',#4588,#4654,#7178,.T.);+#7178=LINE('',#4589,#537);+#7179=ORIENTED_EDGE('',*,*,#7168,.F.);+#7180=ORIENTED_EDGE('',*,*,#4592,.F.);+#7181=PLANE('',#7182);+#7182=AXIS2_PLACEMENT_3D('',#4589,#273,#546);+#7183=ADVANCED_FACE('',(#7184),#7191,.F.);+#7184=FACE_BOUND('',#7185,.F.);+#7185=EDGE_LOOP('',(#7186,#4652,#7189,#7190));+#7186=ORIENTED_EDGE('',*,*,#7187,.T.);+#7187=EDGE_CURVE('',#4583,#4649,#7188,.T.);+#7188=LINE('',#4584,#537);+#7189=ORIENTED_EDGE('',*,*,#7177,.F.);+#7190=ORIENTED_EDGE('',*,*,#4587,.F.);+#7191=PLANE('',#7192);+#7192=AXIS2_PLACEMENT_3D('',#4584,#546,#13);+#7193=ADVANCED_FACE('',(#7194),#7201,.F.);+#7194=FACE_BOUND('',#7195,.F.);+#7195=EDGE_LOOP('',(#7196,#4647,#7199,#7200));+#7196=ORIENTED_EDGE('',*,*,#7197,.T.);+#7197=EDGE_CURVE('',#4576,#4642,#7198,.T.);+#7198=LINE('',#4577,#537);+#7199=ORIENTED_EDGE('',*,*,#7187,.F.);+#7200=ORIENTED_EDGE('',*,*,#4582,.F.);+#7201=PLANE('',#7202);+#7202=AXIS2_PLACEMENT_3D('',#4577,#13,#50);+#7203=ADVANCED_FACE('',(#7204),#7211,.T.);+#7204=FACE_BOUND('',#7205,.F.);+#7205=EDGE_LOOP('',(#7206,#4640,#7209,#7210));+#7206=ORIENTED_EDGE('',*,*,#7207,.T.);+#7207=EDGE_CURVE('',#4571,#4637,#7208,.T.);+#7208=LINE('',#4572,#537);+#7209=ORIENTED_EDGE('',*,*,#7197,.F.);+#7210=ORIENTED_EDGE('',*,*,#4575,.F.);+#7211=CYLINDRICAL_SURFACE('',#7212,0.2);+#7212=AXIS2_PLACEMENT_3D('',#4580,#231,#3977);+#7213=ADVANCED_FACE('',(#7214),#7221,.F.);+#7214=FACE_BOUND('',#7215,.F.);+#7215=EDGE_LOOP('',(#7216,#4635,#7219,#7220));+#7216=ORIENTED_EDGE('',*,*,#7217,.T.);+#7217=EDGE_CURVE('',#4564,#4630,#7218,.T.);+#7218=LINE('',#4565,#537);+#7219=ORIENTED_EDGE('',*,*,#7207,.F.);+#7220=ORIENTED_EDGE('',*,*,#4570,.F.);+#7221=PLANE('',#7222);+#7222=AXIS2_PLACEMENT_3D('',#4565,#6687,#3969);+#7223=ADVANCED_FACE('',(#7224),#7229,.F.);+#7224=FACE_BOUND('',#7225,.F.);+#7225=EDGE_LOOP('',(#7226,#4628,#7227,#7228));+#7226=ORIENTED_EDGE('',*,*,#6740,.T.);+#7227=ORIENTED_EDGE('',*,*,#7217,.F.);+#7228=ORIENTED_EDGE('',*,*,#4563,.F.);+#7229=CYLINDRICAL_SURFACE('',#4567,0.1);+#7230=ADVANCED_FACE('',(#7231),#7238,.F.);+#7231=FACE_BOUND('',#7232,.F.);+#7232=EDGE_LOOP('',(#7233,#4815,#7236,#7237));+#7233=ORIENTED_EDGE('',*,*,#7234,.T.);+#7234=EDGE_CURVE('',#4745,#4811,#7235,.T.);+#7235=LINE('',#4746,#537);+#7236=ORIENTED_EDGE('',*,*,#4831,.F.);+#7237=ORIENTED_EDGE('',*,*,#4750,.F.);+#7238=PLANE('',#7239);+#7239=AXIS2_PLACEMENT_3D('',#4746,#6627,#4006);+#7240=ADVANCED_FACE('',(#7241),#7248,.F.);+#7241=FACE_BOUND('',#7242,.F.);+#7242=EDGE_LOOP('',(#7243,#4809,#7246,#7247));+#7243=ORIENTED_EDGE('',*,*,#7244,.T.);+#7244=EDGE_CURVE('',#4740,#4806,#7245,.T.);+#7245=LINE('',#4741,#537);+#7246=ORIENTED_EDGE('',*,*,#7234,.F.);+#7247=ORIENTED_EDGE('',*,*,#4744,.F.);+#7248=CYLINDRICAL_SURFACE('',#4748,1.E-01);+#7249=ADVANCED_FACE('',(#7250),#7257,.F.);+#7250=FACE_BOUND('',#7251,.F.);+#7251=EDGE_LOOP('',(#7252,#4804,#7255,#7256));+#7252=ORIENTED_EDGE('',*,*,#7253,.T.);+#7253=EDGE_CURVE('',#4735,#4801,#7254,.T.);+#7254=LINE('',#4736,#537);+#7255=ORIENTED_EDGE('',*,*,#7244,.F.);+#7256=ORIENTED_EDGE('',*,*,#4739,.F.);+#7257=PLANE('',#7258);+#7258=AXIS2_PLACEMENT_3D('',#4736,#273,#546);+#7259=ADVANCED_FACE('',(#7260),#7267,.F.);+#7260=FACE_BOUND('',#7261,.F.);+#7261=EDGE_LOOP('',(#7262,#4799,#7265,#7266));+#7262=ORIENTED_EDGE('',*,*,#7263,.T.);+#7263=EDGE_CURVE('',#4730,#4796,#7264,.T.);+#7264=LINE('',#4731,#537);+#7265=ORIENTED_EDGE('',*,*,#7253,.F.);+#7266=ORIENTED_EDGE('',*,*,#4734,.F.);+#7267=PLANE('',#7268);+#7268=AXIS2_PLACEMENT_3D('',#4731,#546,#13);+#7269=ADVANCED_FACE('',(#7270),#7277,.F.);+#7270=FACE_BOUND('',#7271,.F.);+#7271=EDGE_LOOP('',(#7272,#4794,#7275,#7276));+#7272=ORIENTED_EDGE('',*,*,#7273,.T.);+#7273=EDGE_CURVE('',#4723,#4789,#7274,.T.);+#7274=LINE('',#4724,#537);+#7275=ORIENTED_EDGE('',*,*,#7263,.F.);+#7276=ORIENTED_EDGE('',*,*,#4729,.F.);+#7277=PLANE('',#7278);+#7278=AXIS2_PLACEMENT_3D('',#4724,#13,#50);+#7279=ADVANCED_FACE('',(#7280),#7287,.T.);+#7280=FACE_BOUND('',#7281,.F.);+#7281=EDGE_LOOP('',(#7282,#4787,#7285,#7286));+#7282=ORIENTED_EDGE('',*,*,#7283,.T.);+#7283=EDGE_CURVE('',#4718,#4784,#7284,.T.);+#7284=LINE('',#4719,#537);+#7285=ORIENTED_EDGE('',*,*,#7273,.F.);+#7286=ORIENTED_EDGE('',*,*,#4722,.F.);+#7287=CYLINDRICAL_SURFACE('',#7288,0.2);+#7288=AXIS2_PLACEMENT_3D('',#4727,#231,#3977);+#7289=ADVANCED_FACE('',(#7290),#7297,.F.);+#7290=FACE_BOUND('',#7291,.F.);+#7291=EDGE_LOOP('',(#7292,#4782,#7295,#7296));+#7292=ORIENTED_EDGE('',*,*,#7293,.T.);+#7293=EDGE_CURVE('',#4711,#4777,#7294,.T.);+#7294=LINE('',#4712,#537);+#7295=ORIENTED_EDGE('',*,*,#7283,.F.);+#7296=ORIENTED_EDGE('',*,*,#4717,.F.);+#7297=PLANE('',#7298);+#7298=AXIS2_PLACEMENT_3D('',#4712,#6687,#3969);+#7299=ADVANCED_FACE('',(#7300),#7305,.F.);+#7300=FACE_BOUND('',#7301,.F.);+#7301=EDGE_LOOP('',(#7302,#4775,#7303,#7304));+#7302=ORIENTED_EDGE('',*,*,#6750,.T.);+#7303=ORIENTED_EDGE('',*,*,#7293,.F.);+#7304=ORIENTED_EDGE('',*,*,#4710,.F.);+#7305=CYLINDRICAL_SURFACE('',#4714,0.1);+#7306=ADVANCED_FACE('',(#7307),#7314,.F.);+#7307=FACE_BOUND('',#7308,.F.);+#7308=EDGE_LOOP('',(#7309,#4962,#7312,#7313));+#7309=ORIENTED_EDGE('',*,*,#7310,.T.);+#7310=EDGE_CURVE('',#4892,#4958,#7311,.T.);+#7311=LINE('',#4893,#537);+#7312=ORIENTED_EDGE('',*,*,#4978,.F.);+#7313=ORIENTED_EDGE('',*,*,#4897,.F.);+#7314=PLANE('',#7315);+#7315=AXIS2_PLACEMENT_3D('',#4893,#6627,#4006);+#7316=ADVANCED_FACE('',(#7317),#7324,.F.);+#7317=FACE_BOUND('',#7318,.F.);+#7318=EDGE_LOOP('',(#7319,#4956,#7322,#7323));+#7319=ORIENTED_EDGE('',*,*,#7320,.T.);+#7320=EDGE_CURVE('',#4887,#4953,#7321,.T.);+#7321=LINE('',#4888,#537);+#7322=ORIENTED_EDGE('',*,*,#7310,.F.);+#7323=ORIENTED_EDGE('',*,*,#4891,.F.);+#7324=CYLINDRICAL_SURFACE('',#4895,1.E-01);+#7325=ADVANCED_FACE('',(#7326),#7333,.F.);+#7326=FACE_BOUND('',#7327,.F.);+#7327=EDGE_LOOP('',(#7328,#4951,#7331,#7332));+#7328=ORIENTED_EDGE('',*,*,#7329,.T.);+#7329=EDGE_CURVE('',#4882,#4948,#7330,.T.);+#7330=LINE('',#4883,#537);+#7331=ORIENTED_EDGE('',*,*,#7320,.F.);+#7332=ORIENTED_EDGE('',*,*,#4886,.F.);+#7333=PLANE('',#7334);+#7334=AXIS2_PLACEMENT_3D('',#4883,#273,#546);+#7335=ADVANCED_FACE('',(#7336),#7343,.F.);+#7336=FACE_BOUND('',#7337,.F.);+#7337=EDGE_LOOP('',(#7338,#4946,#7341,#7342));+#7338=ORIENTED_EDGE('',*,*,#7339,.T.);+#7339=EDGE_CURVE('',#4877,#4943,#7340,.T.);+#7340=LINE('',#4878,#537);+#7341=ORIENTED_EDGE('',*,*,#7329,.F.);+#7342=ORIENTED_EDGE('',*,*,#4881,.F.);+#7343=PLANE('',#7344);+#7344=AXIS2_PLACEMENT_3D('',#4878,#546,#13);+#7345=ADVANCED_FACE('',(#7346),#7353,.F.);+#7346=FACE_BOUND('',#7347,.F.);+#7347=EDGE_LOOP('',(#7348,#4941,#7351,#7352));+#7348=ORIENTED_EDGE('',*,*,#7349,.T.);+#7349=EDGE_CURVE('',#4870,#4936,#7350,.T.);+#7350=LINE('',#4871,#537);+#7351=ORIENTED_EDGE('',*,*,#7339,.F.);+#7352=ORIENTED_EDGE('',*,*,#4876,.F.);+#7353=PLANE('',#7354);+#7354=AXIS2_PLACEMENT_3D('',#4871,#13,#50);+#7355=ADVANCED_FACE('',(#7356),#7363,.T.);+#7356=FACE_BOUND('',#7357,.F.);+#7357=EDGE_LOOP('',(#7358,#4934,#7361,#7362));+#7358=ORIENTED_EDGE('',*,*,#7359,.T.);+#7359=EDGE_CURVE('',#4865,#4931,#7360,.T.);+#7360=LINE('',#4866,#537);+#7361=ORIENTED_EDGE('',*,*,#7349,.F.);+#7362=ORIENTED_EDGE('',*,*,#4869,.F.);+#7363=CYLINDRICAL_SURFACE('',#7364,0.2);+#7364=AXIS2_PLACEMENT_3D('',#4874,#231,#3977);+#7365=ADVANCED_FACE('',(#7366),#7373,.F.);+#7366=FACE_BOUND('',#7367,.F.);+#7367=EDGE_LOOP('',(#7368,#4929,#7371,#7372));+#7368=ORIENTED_EDGE('',*,*,#7369,.T.);+#7369=EDGE_CURVE('',#4858,#4924,#7370,.T.);+#7370=LINE('',#4859,#537);+#7371=ORIENTED_EDGE('',*,*,#7359,.F.);+#7372=ORIENTED_EDGE('',*,*,#4864,.F.);+#7373=PLANE('',#7374);+#7374=AXIS2_PLACEMENT_3D('',#4859,#6687,#3969);+#7375=ADVANCED_FACE('',(#7376),#7381,.F.);+#7376=FACE_BOUND('',#7377,.F.);+#7377=EDGE_LOOP('',(#7378,#4922,#7379,#7380));+#7378=ORIENTED_EDGE('',*,*,#6760,.T.);+#7379=ORIENTED_EDGE('',*,*,#7369,.F.);+#7380=ORIENTED_EDGE('',*,*,#4857,.F.);+#7381=CYLINDRICAL_SURFACE('',#4861,0.1);+#7382=ADVANCED_FACE('',(#7383),#7390,.F.);+#7383=FACE_BOUND('',#7384,.F.);+#7384=EDGE_LOOP('',(#7385,#5109,#7388,#7389));+#7385=ORIENTED_EDGE('',*,*,#7386,.T.);+#7386=EDGE_CURVE('',#5039,#5105,#7387,.T.);+#7387=LINE('',#5040,#537);+#7388=ORIENTED_EDGE('',*,*,#5125,.F.);+#7389=ORIENTED_EDGE('',*,*,#5044,.F.);+#7390=PLANE('',#7391);+#7391=AXIS2_PLACEMENT_3D('',#5040,#6627,#4006);+#7392=ADVANCED_FACE('',(#7393),#7400,.F.);+#7393=FACE_BOUND('',#7394,.F.);+#7394=EDGE_LOOP('',(#7395,#5103,#7398,#7399));+#7395=ORIENTED_EDGE('',*,*,#7396,.T.);+#7396=EDGE_CURVE('',#5034,#5100,#7397,.T.);+#7397=LINE('',#5035,#537);+#7398=ORIENTED_EDGE('',*,*,#7386,.F.);+#7399=ORIENTED_EDGE('',*,*,#5038,.F.);+#7400=CYLINDRICAL_SURFACE('',#5042,1.E-01);+#7401=ADVANCED_FACE('',(#7402),#7409,.F.);+#7402=FACE_BOUND('',#7403,.F.);+#7403=EDGE_LOOP('',(#7404,#5098,#7407,#7408));+#7404=ORIENTED_EDGE('',*,*,#7405,.T.);+#7405=EDGE_CURVE('',#5029,#5095,#7406,.T.);+#7406=LINE('',#5030,#537);+#7407=ORIENTED_EDGE('',*,*,#7396,.F.);+#7408=ORIENTED_EDGE('',*,*,#5033,.F.);+#7409=PLANE('',#7410);+#7410=AXIS2_PLACEMENT_3D('',#5030,#273,#546);+#7411=ADVANCED_FACE('',(#7412),#7419,.F.);+#7412=FACE_BOUND('',#7413,.F.);+#7413=EDGE_LOOP('',(#7414,#5093,#7417,#7418));+#7414=ORIENTED_EDGE('',*,*,#7415,.T.);+#7415=EDGE_CURVE('',#5024,#5090,#7416,.T.);+#7416=LINE('',#5025,#537);+#7417=ORIENTED_EDGE('',*,*,#7405,.F.);+#7418=ORIENTED_EDGE('',*,*,#5028,.F.);+#7419=PLANE('',#7420);+#7420=AXIS2_PLACEMENT_3D('',#5025,#546,#13);+#7421=ADVANCED_FACE('',(#7422),#7429,.F.);+#7422=FACE_BOUND('',#7423,.F.);+#7423=EDGE_LOOP('',(#7424,#5088,#7427,#7428));+#7424=ORIENTED_EDGE('',*,*,#7425,.T.);+#7425=EDGE_CURVE('',#5017,#5083,#7426,.T.);+#7426=LINE('',#5018,#537);+#7427=ORIENTED_EDGE('',*,*,#7415,.F.);+#7428=ORIENTED_EDGE('',*,*,#5023,.F.);+#7429=PLANE('',#7430);+#7430=AXIS2_PLACEMENT_3D('',#5018,#13,#50);+#7431=ADVANCED_FACE('',(#7432),#7439,.T.);+#7432=FACE_BOUND('',#7433,.F.);+#7433=EDGE_LOOP('',(#7434,#5081,#7437,#7438));+#7434=ORIENTED_EDGE('',*,*,#7435,.T.);+#7435=EDGE_CURVE('',#5012,#5078,#7436,.T.);+#7436=LINE('',#5013,#537);+#7437=ORIENTED_EDGE('',*,*,#7425,.F.);+#7438=ORIENTED_EDGE('',*,*,#5016,.F.);+#7439=CYLINDRICAL_SURFACE('',#7440,0.2);+#7440=AXIS2_PLACEMENT_3D('',#5021,#231,#3977);+#7441=ADVANCED_FACE('',(#7442),#7449,.F.);+#7442=FACE_BOUND('',#7443,.F.);+#7443=EDGE_LOOP('',(#7444,#5076,#7447,#7448));+#7444=ORIENTED_EDGE('',*,*,#7445,.T.);+#7445=EDGE_CURVE('',#5005,#5071,#7446,.T.);+#7446=LINE('',#5006,#537);+#7447=ORIENTED_EDGE('',*,*,#7435,.F.);+#7448=ORIENTED_EDGE('',*,*,#5011,.F.);+#7449=PLANE('',#7450);+#7450=AXIS2_PLACEMENT_3D('',#5006,#6687,#3969);+#7451=ADVANCED_FACE('',(#7452),#7457,.F.);+#7452=FACE_BOUND('',#7453,.F.);+#7453=EDGE_LOOP('',(#7454,#5069,#7455,#7456));+#7454=ORIENTED_EDGE('',*,*,#6770,.T.);+#7455=ORIENTED_EDGE('',*,*,#7445,.F.);+#7456=ORIENTED_EDGE('',*,*,#5004,.F.);+#7457=CYLINDRICAL_SURFACE('',#5008,0.1);+#7458=ADVANCED_FACE('',(#7459),#7466,.F.);+#7459=FACE_BOUND('',#7460,.F.);+#7460=EDGE_LOOP('',(#7461,#5256,#7464,#7465));+#7461=ORIENTED_EDGE('',*,*,#7462,.T.);+#7462=EDGE_CURVE('',#5186,#5252,#7463,.T.);+#7463=LINE('',#5187,#537);+#7464=ORIENTED_EDGE('',*,*,#5272,.F.);+#7465=ORIENTED_EDGE('',*,*,#5191,.F.);+#7466=PLANE('',#7467);+#7467=AXIS2_PLACEMENT_3D('',#5187,#6627,#4006);+#7468=ADVANCED_FACE('',(#7469),#7476,.F.);+#7469=FACE_BOUND('',#7470,.F.);+#7470=EDGE_LOOP('',(#7471,#5250,#7474,#7475));+#7471=ORIENTED_EDGE('',*,*,#7472,.T.);+#7472=EDGE_CURVE('',#5181,#5247,#7473,.T.);+#7473=LINE('',#5182,#537);+#7474=ORIENTED_EDGE('',*,*,#7462,.F.);+#7475=ORIENTED_EDGE('',*,*,#5185,.F.);+#7476=CYLINDRICAL_SURFACE('',#5189,1.E-01);+#7477=ADVANCED_FACE('',(#7478),#7485,.F.);+#7478=FACE_BOUND('',#7479,.F.);+#7479=EDGE_LOOP('',(#7480,#5245,#7483,#7484));+#7480=ORIENTED_EDGE('',*,*,#7481,.T.);+#7481=EDGE_CURVE('',#5176,#5242,#7482,.T.);+#7482=LINE('',#5177,#537);+#7483=ORIENTED_EDGE('',*,*,#7472,.F.);+#7484=ORIENTED_EDGE('',*,*,#5180,.F.);+#7485=PLANE('',#7486);+#7486=AXIS2_PLACEMENT_3D('',#5177,#273,#546);+#7487=ADVANCED_FACE('',(#7488),#7495,.F.);+#7488=FACE_BOUND('',#7489,.F.);+#7489=EDGE_LOOP('',(#7490,#5240,#7493,#7494));+#7490=ORIENTED_EDGE('',*,*,#7491,.T.);+#7491=EDGE_CURVE('',#5171,#5237,#7492,.T.);+#7492=LINE('',#5172,#537);+#7493=ORIENTED_EDGE('',*,*,#7481,.F.);+#7494=ORIENTED_EDGE('',*,*,#5175,.F.);+#7495=PLANE('',#7496);+#7496=AXIS2_PLACEMENT_3D('',#5172,#546,#13);+#7497=ADVANCED_FACE('',(#7498),#7505,.F.);+#7498=FACE_BOUND('',#7499,.F.);+#7499=EDGE_LOOP('',(#7500,#5235,#7503,#7504));+#7500=ORIENTED_EDGE('',*,*,#7501,.T.);+#7501=EDGE_CURVE('',#5164,#5230,#7502,.T.);+#7502=LINE('',#5165,#537);+#7503=ORIENTED_EDGE('',*,*,#7491,.F.);+#7504=ORIENTED_EDGE('',*,*,#5170,.F.);+#7505=PLANE('',#7506);+#7506=AXIS2_PLACEMENT_3D('',#5165,#13,#50);+#7507=ADVANCED_FACE('',(#7508),#7515,.T.);+#7508=FACE_BOUND('',#7509,.F.);+#7509=EDGE_LOOP('',(#7510,#5228,#7513,#7514));+#7510=ORIENTED_EDGE('',*,*,#7511,.T.);+#7511=EDGE_CURVE('',#5159,#5225,#7512,.T.);+#7512=LINE('',#5160,#537);+#7513=ORIENTED_EDGE('',*,*,#7501,.F.);+#7514=ORIENTED_EDGE('',*,*,#5163,.F.);+#7515=CYLINDRICAL_SURFACE('',#7516,0.2);+#7516=AXIS2_PLACEMENT_3D('',#5168,#231,#3977);+#7517=ADVANCED_FACE('',(#7518),#7525,.F.);+#7518=FACE_BOUND('',#7519,.F.);+#7519=EDGE_LOOP('',(#7520,#5223,#7523,#7524));+#7520=ORIENTED_EDGE('',*,*,#7521,.T.);+#7521=EDGE_CURVE('',#5152,#5218,#7522,.T.);+#7522=LINE('',#5153,#537);+#7523=ORIENTED_EDGE('',*,*,#7511,.F.);+#7524=ORIENTED_EDGE('',*,*,#5158,.F.);+#7525=PLANE('',#7526);+#7526=AXIS2_PLACEMENT_3D('',#5153,#6687,#3969);+#7527=ADVANCED_FACE('',(#7528),#7533,.F.);+#7528=FACE_BOUND('',#7529,.F.);+#7529=EDGE_LOOP('',(#7530,#5216,#7531,#7532));+#7530=ORIENTED_EDGE('',*,*,#6780,.T.);+#7531=ORIENTED_EDGE('',*,*,#7521,.F.);+#7532=ORIENTED_EDGE('',*,*,#5151,.F.);+#7533=CYLINDRICAL_SURFACE('',#5155,0.1);+#7534=ADVANCED_FACE('',(#7535),#7605,.F.);+#7535=FACE_BOUND('',#7536,.F.);+#7536=EDGE_LOOP('',(#7537,#7538,#7546,#7555,#7562,#7570,#7575,#7580,#7585,#7592,#7599,#7604));+#7537=ORIENTED_EDGE('',*,*,#5316,.F.);+#7538=ORIENTED_EDGE('',*,*,#7539,.T.);+#7539=EDGE_CURVE('',#5312,#7540,#7542,.T.);+#7540=VERTEX_POINT('',#7541);+#7541=CARTESIAN_POINT('',(2.985,-3.7,0.55));+#7542=LINE('',#7543,#7544);+#7543=CARTESIAN_POINT('',(2.985,-3.35,0.55));+#7544=VECTOR('',#7545,1.);+#7545=DIRECTION('',(-1.110223024625E-16,-1.,0.));+#7546=ORIENTED_EDGE('',*,*,#7547,.T.);+#7547=EDGE_CURVE('',#7540,#7548,#7550,.T.);+#7548=VERTEX_POINT('',#7549);+#7549=CARTESIAN_POINT('',(2.985,-3.798480775301,0.467364817767));+#7550=CIRCLE('',#7551,0.1);+#7551=AXIS2_PLACEMENT_3D('',#7552,#7553,#7554);+#7552=CARTESIAN_POINT('',(2.985,-3.7,0.45));+#7553=DIRECTION('',(1.,-1.110223024625E-16,0.));+#7554=DIRECTION('',(-4.930380657631E-31,-4.440892098501E-15,1.));+#7555=ORIENTED_EDGE('',*,*,#7556,.T.);+#7556=EDGE_CURVE('',#7548,#7557,#7559,.T.);+#7557=VERTEX_POINT('',#7558);+#7558=CARTESIAN_POINT('',(2.985,-3.847120194575,0.165270364467));+#7559=LINE('',#7549,#7560);+#7560=VECTOR('',#7561,1.);+#7561=DIRECTION('',(-1.764811806781E-17,-0.158960115908,-0.987285005229));+#7562=ORIENTED_EDGE('',*,*,#7563,.T.);+#7563=EDGE_CURVE('',#7557,#7564,#7566,.T.);+#7564=VERTEX_POINT('',#7565);+#7565=CARTESIAN_POINT('',(2.985,-4.044081745177,-2.22044604925E-16));+#7566=CIRCLE('',#7567,0.2);+#7567=AXIS2_PLACEMENT_3D('',#7568,#5290,#7569);+#7568=CARTESIAN_POINT('',(2.985,-4.044081745177,0.2));+#7569=DIRECTION('',(1.093356242224E-16,0.984807753012,-0.173648177667));+#7570=ORIENTED_EDGE('',*,*,#7571,.T.);+#7571=EDGE_CURVE('',#7564,#7572,#7574,.T.);+#7572=VERTEX_POINT('',#7573);+#7573=CARTESIAN_POINT('',(2.985,-4.5,-2.22044604925E-16));+#7574=LINE('',#7565,#7544);+#7575=ORIENTED_EDGE('',*,*,#7576,.T.);+#7576=EDGE_CURVE('',#7572,#7577,#7579,.T.);+#7577=VERTEX_POINT('',#7578);+#7578=CARTESIAN_POINT('',(2.985,-4.5,1.E-01));+#7579=LINE('',#7573,#822);+#7580=ORIENTED_EDGE('',*,*,#7581,.T.);+#7581=EDGE_CURVE('',#7577,#7582,#7584,.T.);+#7582=VERTEX_POINT('',#7583);+#7583=CARTESIAN_POINT('',(2.985,-4.044081745177,1.E-01));+#7584=LINE('',#7578,#2556);+#7585=ORIENTED_EDGE('',*,*,#7586,.T.);+#7586=EDGE_CURVE('',#7582,#7587,#7589,.T.);+#7587=VERTEX_POINT('',#7588);+#7588=CARTESIAN_POINT('',(2.985,-3.945600969876,0.182635182233));+#7589=CIRCLE('',#7590,1.E-01);+#7590=AXIS2_PLACEMENT_3D('',#7568,#7553,#7591);+#7591=DIRECTION('',(-9.860761315263E-31,-8.881784197001E-15,-1.));+#7592=ORIENTED_EDGE('',*,*,#7593,.T.);+#7593=EDGE_CURVE('',#7587,#7594,#7596,.T.);+#7594=VERTEX_POINT('',#7595);+#7595=CARTESIAN_POINT('',(2.985,-3.896961550602,0.484729635533));+#7596=LINE('',#7588,#7597);+#7597=VECTOR('',#7598,1.);+#7598=DIRECTION('',(1.764811806781E-17,0.158960115908,0.987285005229));+#7599=ORIENTED_EDGE('',*,*,#7600,.T.);+#7600=EDGE_CURVE('',#7594,#5283,#7601,.T.);+#7601=CIRCLE('',#7602,0.2);+#7602=AXIS2_PLACEMENT_3D('',#7552,#5290,#7603);+#7603=DIRECTION('',(-1.093356242224E-16,-0.984807753012,0.173648177667));+#7604=ORIENTED_EDGE('',*,*,#5282,.T.);+#7605=PLANE('',#7606);+#7606=AXIS2_PLACEMENT_3D('',#7607,#5290,#13);+#7607=CARTESIAN_POINT('',(2.985,-3.912728288784,0.307097536874));+#7608=ADVANCED_FACE('',(#7609),#7672,.T.);+#7609=FACE_BOUND('',#7610,.T.);+#7610=EDGE_LOOP('',(#7611,#7617,#7623,#7630,#7635,#7642,#7647,#7652,#7657,#7663,#7668,#5291));+#7611=ORIENTED_EDGE('',*,*,#7612,.F.);+#7612=EDGE_CURVE('',#7613,#5293,#7615,.T.);+#7613=VERTEX_POINT('',#7614);+#7614=CARTESIAN_POINT('',(2.615,-3.5,0.55));+#7615=LINE('',#7616,#822);+#7616=CARTESIAN_POINT('',(2.615,-3.5,0.478548768437));+#7617=ORIENTED_EDGE('',*,*,#7618,.T.);+#7618=EDGE_CURVE('',#7613,#7619,#7621,.T.);+#7619=VERTEX_POINT('',#7620);+#7620=CARTESIAN_POINT('',(2.615,-3.7,0.55));+#7621=LINE('',#7622,#7544);+#7622=CARTESIAN_POINT('',(2.615,-3.35,0.55));+#7623=ORIENTED_EDGE('',*,*,#7624,.T.);+#7624=EDGE_CURVE('',#7619,#7625,#7627,.T.);+#7625=VERTEX_POINT('',#7626);+#7626=CARTESIAN_POINT('',(2.615,-3.798480775301,0.467364817767));+#7627=CIRCLE('',#7628,0.1);+#7628=AXIS2_PLACEMENT_3D('',#7629,#7553,#7554);+#7629=CARTESIAN_POINT('',(2.615,-3.7,0.45));+#7630=ORIENTED_EDGE('',*,*,#7631,.T.);+#7631=EDGE_CURVE('',#7625,#7632,#7634,.T.);+#7632=VERTEX_POINT('',#7633);+#7633=CARTESIAN_POINT('',(2.615,-3.847120194575,0.165270364467));+#7634=LINE('',#7626,#7560);+#7635=ORIENTED_EDGE('',*,*,#7636,.T.);+#7636=EDGE_CURVE('',#7632,#7637,#7639,.T.);+#7637=VERTEX_POINT('',#7638);+#7638=CARTESIAN_POINT('',(2.615,-4.044081745177,-2.22044604925E-16));+#7639=CIRCLE('',#7640,0.2);+#7640=AXIS2_PLACEMENT_3D('',#7641,#5290,#7569);+#7641=CARTESIAN_POINT('',(2.615,-4.044081745177,0.2));+#7642=ORIENTED_EDGE('',*,*,#7643,.T.);+#7643=EDGE_CURVE('',#7637,#7644,#7646,.T.);+#7644=VERTEX_POINT('',#7645);+#7645=CARTESIAN_POINT('',(2.615,-4.5,-2.22044604925E-16));+#7646=LINE('',#7638,#7544);+#7647=ORIENTED_EDGE('',*,*,#7648,.T.);+#7648=EDGE_CURVE('',#7644,#7649,#7651,.T.);+#7649=VERTEX_POINT('',#7650);+#7650=CARTESIAN_POINT('',(2.615,-4.5,1.E-01));+#7651=LINE('',#7645,#822);+#7652=ORIENTED_EDGE('',*,*,#7653,.T.);+#7653=EDGE_CURVE('',#7649,#7654,#7656,.T.);+#7654=VERTEX_POINT('',#7655);+#7655=CARTESIAN_POINT('',(2.615,-4.044081745177,1.E-01));+#7656=LINE('',#7650,#2556);+#7657=ORIENTED_EDGE('',*,*,#7658,.T.);+#7658=EDGE_CURVE('',#7654,#7659,#7661,.T.);+#7659=VERTEX_POINT('',#7660);+#7660=CARTESIAN_POINT('',(2.615,-3.945600969876,0.182635182233));+#7661=CIRCLE('',#7662,1.E-01);+#7662=AXIS2_PLACEMENT_3D('',#7641,#7553,#7591);+#7663=ORIENTED_EDGE('',*,*,#7664,.T.);+#7664=EDGE_CURVE('',#7659,#7665,#7667,.T.);+#7665=VERTEX_POINT('',#7666);+#7666=CARTESIAN_POINT('',(2.615,-3.896961550602,0.484729635533));+#7667=LINE('',#7660,#7597);+#7668=ORIENTED_EDGE('',*,*,#7669,.T.);+#7669=EDGE_CURVE('',#7665,#5286,#7670,.T.);+#7670=CIRCLE('',#7671,0.2);+#7671=AXIS2_PLACEMENT_3D('',#7629,#5290,#7603);+#7672=PLANE('',#7673);+#7673=AXIS2_PLACEMENT_3D('',#7674,#5290,#13);+#7674=CARTESIAN_POINT('',(2.615,-3.912728288784,0.307097536874));+#7675=ADVANCED_FACE('',(#7676),#7683,.T.);+#7676=FACE_BOUND('',#7677,.F.);+#7677=EDGE_LOOP('',(#7678,#7668,#7681,#7682));+#7678=ORIENTED_EDGE('',*,*,#7679,.T.);+#7679=EDGE_CURVE('',#7594,#7665,#7680,.T.);+#7680=LINE('',#7595,#5289);+#7681=ORIENTED_EDGE('',*,*,#5285,.F.);+#7682=ORIENTED_EDGE('',*,*,#7600,.F.);+#7683=CYLINDRICAL_SURFACE('',#7684,0.2);+#7684=AXIS2_PLACEMENT_3D('',#7552,#7553,#7603);+#7685=ADVANCED_FACE('',(#7686),#7748,.F.);+#7686=FACE_BOUND('',#7687,.F.);+#7687=EDGE_LOOP('',(#5349,#7688,#7689,#7690,#7694,#7698,#7702,#7706,#7710,#7714,#7718,#7722,#7726,#7730,#7734,#7738,#7742,#7744,#7746,#7747));+#7688=ORIENTED_EDGE('',*,*,#5707,.T.);+#7689=ORIENTED_EDGE('',*,*,#5731,.F.);+#7690=ORIENTED_EDGE('',*,*,#7691,.F.);+#7691=EDGE_CURVE('',#7692,#5726,#5314,.T.);+#7692=VERTEX_POINT('',#7693);+#7693=CARTESIAN_POINT('',(-2.615,-3.5,0.55));+#7694=ORIENTED_EDGE('',*,*,#7695,.F.);+#7695=EDGE_CURVE('',#7696,#7692,#5314,.T.);+#7696=VERTEX_POINT('',#7697);+#7697=CARTESIAN_POINT('',(-2.185,-3.5,0.55));+#7698=ORIENTED_EDGE('',*,*,#7699,.F.);+#7699=EDGE_CURVE('',#7700,#7696,#5314,.T.);+#7700=VERTEX_POINT('',#7701);+#7701=CARTESIAN_POINT('',(-1.815,-3.5,0.55));+#7702=ORIENTED_EDGE('',*,*,#7703,.F.);+#7703=EDGE_CURVE('',#7704,#7700,#5314,.T.);+#7704=VERTEX_POINT('',#7705);+#7705=CARTESIAN_POINT('',(-1.385,-3.5,0.55));+#7706=ORIENTED_EDGE('',*,*,#7707,.F.);+#7707=EDGE_CURVE('',#7708,#7704,#5314,.T.);+#7708=VERTEX_POINT('',#7709);+#7709=CARTESIAN_POINT('',(-1.015,-3.5,0.55));+#7710=ORIENTED_EDGE('',*,*,#7711,.F.);+#7711=EDGE_CURVE('',#7712,#7708,#5314,.T.);+#7712=VERTEX_POINT('',#7713);+#7713=CARTESIAN_POINT('',(-0.585,-3.5,0.55));+#7714=ORIENTED_EDGE('',*,*,#7715,.F.);+#7715=EDGE_CURVE('',#7716,#7712,#5314,.T.);+#7716=VERTEX_POINT('',#7717);+#7717=CARTESIAN_POINT('',(-0.215,-3.5,0.55));+#7718=ORIENTED_EDGE('',*,*,#7719,.F.);+#7719=EDGE_CURVE('',#7720,#7716,#5314,.T.);+#7720=VERTEX_POINT('',#7721);+#7721=CARTESIAN_POINT('',(0.215,-3.5,0.55));+#7722=ORIENTED_EDGE('',*,*,#7723,.F.);+#7723=EDGE_CURVE('',#7724,#7720,#5314,.T.);+#7724=VERTEX_POINT('',#7725);+#7725=CARTESIAN_POINT('',(0.585,-3.5,0.55));+#7726=ORIENTED_EDGE('',*,*,#7727,.F.);+#7727=EDGE_CURVE('',#7728,#7724,#5314,.T.);+#7728=VERTEX_POINT('',#7729);+#7729=CARTESIAN_POINT('',(1.015,-3.5,0.55));+#7730=ORIENTED_EDGE('',*,*,#7731,.F.);+#7731=EDGE_CURVE('',#7732,#7728,#5314,.T.);+#7732=VERTEX_POINT('',#7733);+#7733=CARTESIAN_POINT('',(1.385,-3.5,0.55));+#7734=ORIENTED_EDGE('',*,*,#7735,.F.);+#7735=EDGE_CURVE('',#7736,#7732,#5314,.T.);+#7736=VERTEX_POINT('',#7737);+#7737=CARTESIAN_POINT('',(1.815,-3.5,0.55));+#7738=ORIENTED_EDGE('',*,*,#7739,.F.);+#7739=EDGE_CURVE('',#7740,#7736,#5314,.T.);+#7740=VERTEX_POINT('',#7741);+#7741=CARTESIAN_POINT('',(2.185,-3.5,0.55));+#7742=ORIENTED_EDGE('',*,*,#7743,.F.);+#7743=EDGE_CURVE('',#7613,#7740,#5314,.T.);+#7744=ORIENTED_EDGE('',*,*,#7745,.F.);+#7745=EDGE_CURVE('',#5312,#7613,#5314,.T.);+#7746=ORIENTED_EDGE('',*,*,#5311,.F.);+#7747=ORIENTED_EDGE('',*,*,#6709,.F.);+#7748=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#5347,#5308),(#5352,#5704)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7749=ADVANCED_FACE('',(#7750),#7757,.F.);+#7750=FACE_BOUND('',#7751,.F.);+#7751=EDGE_LOOP('',(#7752,#5817,#7753,#7756));+#7752=ORIENTED_EDGE('',*,*,#5479,.T.);+#7753=ORIENTED_EDGE('',*,*,#7754,.F.);+#7754=EDGE_CURVE('',#5763,#5819,#7755,.T.);+#7755=LINE('',#5764,#845);+#7756=ORIENTED_EDGE('',*,*,#5762,.F.);+#7757=CYLINDRICAL_SURFACE('',#7758,0.1);+#7758=AXIS2_PLACEMENT_3D('',#5767,#2934,#2712);+#7759=ADVANCED_FACE('',(#7760),#7767,.F.);+#7760=FACE_BOUND('',#7761,.F.);+#7761=EDGE_LOOP('',(#7762,#5940,#7763,#7766));+#7762=ORIENTED_EDGE('',*,*,#5513,.T.);+#7763=ORIENTED_EDGE('',*,*,#7764,.F.);+#7764=EDGE_CURVE('',#5886,#5942,#7765,.T.);+#7765=LINE('',#5887,#845);+#7766=ORIENTED_EDGE('',*,*,#5885,.F.);+#7767=CYLINDRICAL_SURFACE('',#7768,0.1);+#7768=AXIS2_PLACEMENT_3D('',#5890,#2934,#2712);+#7769=ADVANCED_FACE('',(#7770),#7777,.F.);+#7770=FACE_BOUND('',#7771,.F.);+#7771=EDGE_LOOP('',(#7772,#6063,#7773,#7776));+#7772=ORIENTED_EDGE('',*,*,#5547,.T.);+#7773=ORIENTED_EDGE('',*,*,#7774,.F.);+#7774=EDGE_CURVE('',#6009,#6065,#7775,.T.);+#7775=LINE('',#6010,#845);+#7776=ORIENTED_EDGE('',*,*,#6008,.F.);+#7777=CYLINDRICAL_SURFACE('',#7778,0.1);+#7778=AXIS2_PLACEMENT_3D('',#6013,#2934,#2712);+#7779=ADVANCED_FACE('',(#7780),#7787,.F.);+#7780=FACE_BOUND('',#7781,.F.);+#7781=EDGE_LOOP('',(#7782,#6186,#7783,#7786));+#7782=ORIENTED_EDGE('',*,*,#5581,.T.);+#7783=ORIENTED_EDGE('',*,*,#7784,.F.);+#7784=EDGE_CURVE('',#6132,#6188,#7785,.T.);+#7785=LINE('',#6133,#845);+#7786=ORIENTED_EDGE('',*,*,#6131,.F.);+#7787=CYLINDRICAL_SURFACE('',#7788,0.1);+#7788=AXIS2_PLACEMENT_3D('',#6136,#2934,#2712);+#7789=ADVANCED_FACE('',(#7790),#7797,.F.);+#7790=FACE_BOUND('',#7791,.F.);+#7791=EDGE_LOOP('',(#7792,#6309,#7793,#7796));+#7792=ORIENTED_EDGE('',*,*,#5615,.T.);+#7793=ORIENTED_EDGE('',*,*,#7794,.F.);+#7794=EDGE_CURVE('',#6255,#6311,#7795,.T.);+#7795=LINE('',#6256,#845);+#7796=ORIENTED_EDGE('',*,*,#6254,.F.);+#7797=CYLINDRICAL_SURFACE('',#7798,0.1);+#7798=AXIS2_PLACEMENT_3D('',#6259,#2934,#2712);+#7799=ADVANCED_FACE('',(#7800),#7807,.F.);+#7800=FACE_BOUND('',#7801,.F.);+#7801=EDGE_LOOP('',(#7802,#6432,#7803,#7806));+#7802=ORIENTED_EDGE('',*,*,#5649,.T.);+#7803=ORIENTED_EDGE('',*,*,#7804,.F.);+#7804=EDGE_CURVE('',#6378,#6434,#7805,.T.);+#7805=LINE('',#6379,#845);+#7806=ORIENTED_EDGE('',*,*,#6377,.F.);+#7807=CYLINDRICAL_SURFACE('',#7808,0.1);+#7808=AXIS2_PLACEMENT_3D('',#6382,#2934,#2712);+#7809=ADVANCED_FACE('',(#7810),#7817,.F.);+#7810=FACE_BOUND('',#7811,.F.);+#7811=EDGE_LOOP('',(#7812,#6555,#7813,#7816));+#7812=ORIENTED_EDGE('',*,*,#5683,.T.);+#7813=ORIENTED_EDGE('',*,*,#7814,.F.);+#7814=EDGE_CURVE('',#6501,#6557,#7815,.T.);+#7815=LINE('',#6502,#845);+#7816=ORIENTED_EDGE('',*,*,#6500,.F.);+#7817=CYLINDRICAL_SURFACE('',#7818,0.1);+#7818=AXIS2_PLACEMENT_3D('',#6505,#2934,#2712);+#7819=ADVANCED_FACE('',(#7820),#7877,.T.);+#7820=FACE_BOUND('',#7821,.T.);+#7821=EDGE_LOOP('',(#5724,#7822,#7828,#7835,#7840,#7847,#7852,#7857,#7862,#7868,#7873,#5748));+#7822=ORIENTED_EDGE('',*,*,#7823,.T.);+#7823=EDGE_CURVE('',#5726,#7824,#7826,.T.);+#7824=VERTEX_POINT('',#7825);+#7825=CARTESIAN_POINT('',(-2.985,-3.7,0.55));+#7826=LINE('',#7827,#7544);+#7827=CARTESIAN_POINT('',(-2.985,-3.35,0.55));+#7828=ORIENTED_EDGE('',*,*,#7829,.T.);+#7829=EDGE_CURVE('',#7824,#7830,#7832,.T.);+#7830=VERTEX_POINT('',#7831);+#7831=CARTESIAN_POINT('',(-2.985,-3.798480775301,0.467364817767));+#7832=CIRCLE('',#7833,0.1);+#7833=AXIS2_PLACEMENT_3D('',#7834,#7553,#7554);+#7834=CARTESIAN_POINT('',(-2.985,-3.7,0.45));+#7835=ORIENTED_EDGE('',*,*,#7836,.T.);+#7836=EDGE_CURVE('',#7830,#7837,#7839,.T.);+#7837=VERTEX_POINT('',#7838);+#7838=CARTESIAN_POINT('',(-2.985,-3.847120194575,0.165270364467));+#7839=LINE('',#7831,#7560);+#7840=ORIENTED_EDGE('',*,*,#7841,.T.);+#7841=EDGE_CURVE('',#7837,#7842,#7844,.T.);+#7842=VERTEX_POINT('',#7843);+#7843=CARTESIAN_POINT('',(-2.985,-4.044081745177,-2.22044604925E-16));+#7844=CIRCLE('',#7845,0.2);+#7845=AXIS2_PLACEMENT_3D('',#7846,#5290,#7569);+#7846=CARTESIAN_POINT('',(-2.985,-4.044081745177,0.2));+#7847=ORIENTED_EDGE('',*,*,#7848,.T.);+#7848=EDGE_CURVE('',#7842,#7849,#7851,.T.);+#7849=VERTEX_POINT('',#7850);+#7850=CARTESIAN_POINT('',(-2.985,-4.5,-2.22044604925E-16));+#7851=LINE('',#7843,#7544);+#7852=ORIENTED_EDGE('',*,*,#7853,.T.);+#7853=EDGE_CURVE('',#7849,#7854,#7856,.T.);+#7854=VERTEX_POINT('',#7855);+#7855=CARTESIAN_POINT('',(-2.985,-4.5,1.E-01));+#7856=LINE('',#7850,#822);+#7857=ORIENTED_EDGE('',*,*,#7858,.T.);+#7858=EDGE_CURVE('',#7854,#7859,#7861,.T.);+#7859=VERTEX_POINT('',#7860);+#7860=CARTESIAN_POINT('',(-2.985,-4.044081745177,1.E-01));+#7861=LINE('',#7855,#2556);+#7862=ORIENTED_EDGE('',*,*,#7863,.T.);+#7863=EDGE_CURVE('',#7859,#7864,#7866,.T.);+#7864=VERTEX_POINT('',#7865);+#7865=CARTESIAN_POINT('',(-2.985,-3.945600969876,0.182635182233));+#7866=CIRCLE('',#7867,1.E-01);+#7867=AXIS2_PLACEMENT_3D('',#7846,#7553,#7591);+#7868=ORIENTED_EDGE('',*,*,#7869,.T.);+#7869=EDGE_CURVE('',#7864,#7870,#7872,.T.);+#7870=VERTEX_POINT('',#7871);+#7871=CARTESIAN_POINT('',(-2.985,-3.896961550602,0.484729635533));+#7872=LINE('',#7865,#7597);+#7873=ORIENTED_EDGE('',*,*,#7874,.T.);+#7874=EDGE_CURVE('',#7870,#5746,#7875,.T.);+#7875=CIRCLE('',#7876,0.2);+#7876=AXIS2_PLACEMENT_3D('',#7834,#5290,#7603);+#7877=PLANE('',#7878);+#7878=AXIS2_PLACEMENT_3D('',#7879,#5290,#13);+#7879=CARTESIAN_POINT('',(-2.985,-3.912728288784,0.307097536874));+#7880=ADVANCED_FACE('',(#7881),#7943,.F.);+#7881=FACE_BOUND('',#7882,.F.);+#7882=EDGE_LOOP('',(#7883,#7887,#7893,#7900,#7905,#7912,#7917,#7922,#7927,#7933,#7938,#7942));+#7883=ORIENTED_EDGE('',*,*,#7884,.F.);+#7884=EDGE_CURVE('',#7692,#5741,#7885,.T.);+#7885=LINE('',#7886,#822);+#7886=CARTESIAN_POINT('',(-2.615,-3.5,0.478548768437));+#7887=ORIENTED_EDGE('',*,*,#7888,.T.);+#7888=EDGE_CURVE('',#7692,#7889,#7891,.T.);+#7889=VERTEX_POINT('',#7890);+#7890=CARTESIAN_POINT('',(-2.615,-3.7,0.55));+#7891=LINE('',#7892,#7544);+#7892=CARTESIAN_POINT('',(-2.615,-3.35,0.55));+#7893=ORIENTED_EDGE('',*,*,#7894,.T.);+#7894=EDGE_CURVE('',#7889,#7895,#7897,.T.);+#7895=VERTEX_POINT('',#7896);+#7896=CARTESIAN_POINT('',(-2.615,-3.798480775301,0.467364817767));+#7897=CIRCLE('',#7898,0.1);+#7898=AXIS2_PLACEMENT_3D('',#7899,#7553,#7554);+#7899=CARTESIAN_POINT('',(-2.615,-3.7,0.45));+#7900=ORIENTED_EDGE('',*,*,#7901,.T.);+#7901=EDGE_CURVE('',#7895,#7902,#7904,.T.);+#7902=VERTEX_POINT('',#7903);+#7903=CARTESIAN_POINT('',(-2.615,-3.847120194575,0.165270364467));+#7904=LINE('',#7896,#7560);+#7905=ORIENTED_EDGE('',*,*,#7906,.T.);+#7906=EDGE_CURVE('',#7902,#7907,#7909,.T.);+#7907=VERTEX_POINT('',#7908);+#7908=CARTESIAN_POINT('',(-2.615,-4.044081745177,-2.22044604925E-16));+#7909=CIRCLE('',#7910,0.2);+#7910=AXIS2_PLACEMENT_3D('',#7911,#5290,#7569);+#7911=CARTESIAN_POINT('',(-2.615,-4.044081745177,0.2));+#7912=ORIENTED_EDGE('',*,*,#7913,.T.);+#7913=EDGE_CURVE('',#7907,#7914,#7916,.T.);+#7914=VERTEX_POINT('',#7915);+#7915=CARTESIAN_POINT('',(-2.615,-4.5,-2.22044604925E-16));+#7916=LINE('',#7908,#7544);+#7917=ORIENTED_EDGE('',*,*,#7918,.T.);+#7918=EDGE_CURVE('',#7914,#7919,#7921,.T.);+#7919=VERTEX_POINT('',#7920);+#7920=CARTESIAN_POINT('',(-2.615,-4.5,1.E-01));+#7921=LINE('',#7915,#822);+#7922=ORIENTED_EDGE('',*,*,#7923,.T.);+#7923=EDGE_CURVE('',#7919,#7924,#7926,.T.);+#7924=VERTEX_POINT('',#7925);+#7925=CARTESIAN_POINT('',(-2.615,-4.044081745177,1.E-01));+#7926=LINE('',#7920,#2556);+#7927=ORIENTED_EDGE('',*,*,#7928,.T.);+#7928=EDGE_CURVE('',#7924,#7929,#7931,.T.);+#7929=VERTEX_POINT('',#7930);+#7930=CARTESIAN_POINT('',(-2.615,-3.945600969876,0.182635182233));+#7931=CIRCLE('',#7932,1.E-01);+#7932=AXIS2_PLACEMENT_3D('',#7911,#7553,#7591);+#7933=ORIENTED_EDGE('',*,*,#7934,.T.);+#7934=EDGE_CURVE('',#7929,#7935,#7937,.T.);+#7935=VERTEX_POINT('',#7936);+#7936=CARTESIAN_POINT('',(-2.615,-3.896961550602,0.484729635533));+#7937=LINE('',#7930,#7597);+#7938=ORIENTED_EDGE('',*,*,#7939,.T.);+#7939=EDGE_CURVE('',#7935,#5739,#7940,.T.);+#7940=CIRCLE('',#7941,0.2);+#7941=AXIS2_PLACEMENT_3D('',#7899,#5290,#7603);+#7942=ORIENTED_EDGE('',*,*,#5738,.T.);+#7943=PLANE('',#7944);+#7944=AXIS2_PLACEMENT_3D('',#7945,#5290,#13);+#7945=CARTESIAN_POINT('',(-2.615,-3.912728288784,0.307097536874));+#7946=ADVANCED_FACE('',(#7947),#7954,.T.);+#7947=FACE_BOUND('',#7948,.F.);+#7948=EDGE_LOOP('',(#7949,#7873,#7952,#7953));+#7949=ORIENTED_EDGE('',*,*,#7950,.T.);+#7950=EDGE_CURVE('',#7935,#7870,#7951,.T.);+#7951=LINE('',#7936,#5289);+#7952=ORIENTED_EDGE('',*,*,#5745,.F.);+#7953=ORIENTED_EDGE('',*,*,#7939,.F.);+#7954=CYLINDRICAL_SURFACE('',#7955,0.2);+#7955=AXIS2_PLACEMENT_3D('',#7899,#7553,#7603);+#7956=ADVANCED_FACE('',(#7957),#7964,.F.);+#7957=FACE_BOUND('',#7958,.F.);+#7958=EDGE_LOOP('',(#7959,#5857,#7962,#7963));+#7959=ORIENTED_EDGE('',*,*,#7960,.T.);+#7960=EDGE_CURVE('',#5797,#5853,#7961,.T.);+#7961=LINE('',#5798,#845);+#7962=ORIENTED_EDGE('',*,*,#5873,.F.);+#7963=ORIENTED_EDGE('',*,*,#5802,.F.);+#7964=PLANE('',#7965);+#7965=AXIS2_PLACEMENT_3D('',#5798,#5370,#2758);+#7966=ADVANCED_FACE('',(#7967),#7974,.F.);+#7967=FACE_BOUND('',#7968,.F.);+#7968=EDGE_LOOP('',(#7969,#5851,#7972,#7973));+#7969=ORIENTED_EDGE('',*,*,#7970,.T.);+#7970=EDGE_CURVE('',#5792,#5848,#7971,.T.);+#7971=LINE('',#5793,#845);+#7972=ORIENTED_EDGE('',*,*,#7960,.F.);+#7973=ORIENTED_EDGE('',*,*,#5796,.F.);+#7974=CYLINDRICAL_SURFACE('',#7975,1.E-01);+#7975=AXIS2_PLACEMENT_3D('',#5779,#2934,#2751);+#7976=ADVANCED_FACE('',(#7977),#7984,.F.);+#7977=FACE_BOUND('',#7978,.F.);+#7978=EDGE_LOOP('',(#7979,#5846,#7982,#7983));+#7979=ORIENTED_EDGE('',*,*,#7980,.T.);+#7980=EDGE_CURVE('',#5787,#5843,#7981,.T.);+#7981=LINE('',#5788,#845);+#7982=ORIENTED_EDGE('',*,*,#7970,.F.);+#7983=ORIENTED_EDGE('',*,*,#5791,.F.);+#7984=PLANE('',#7985);+#7985=AXIS2_PLACEMENT_3D('',#5788,#273,#239);+#7986=ADVANCED_FACE('',(#7987),#7994,.F.);+#7987=FACE_BOUND('',#7988,.F.);+#7988=EDGE_LOOP('',(#7989,#5841,#7992,#7993));+#7989=ORIENTED_EDGE('',*,*,#7990,.T.);+#7990=EDGE_CURVE('',#5782,#5838,#7991,.T.);+#7991=LINE('',#5783,#845);+#7992=ORIENTED_EDGE('',*,*,#7980,.F.);+#7993=ORIENTED_EDGE('',*,*,#5786,.F.);+#7994=PLANE('',#7995);+#7995=AXIS2_PLACEMENT_3D('',#5783,#239,#13);+#7996=ADVANCED_FACE('',(#7997),#8004,.F.);+#7997=FACE_BOUND('',#7998,.F.);+#7998=EDGE_LOOP('',(#7999,#5836,#8002,#8003));+#7999=ORIENTED_EDGE('',*,*,#8000,.T.);+#8000=EDGE_CURVE('',#5775,#5831,#8001,.T.);+#8001=LINE('',#5776,#845);+#8002=ORIENTED_EDGE('',*,*,#7990,.F.);+#8003=ORIENTED_EDGE('',*,*,#5781,.F.);+#8004=PLANE('',#8005);+#8005=AXIS2_PLACEMENT_3D('',#5776,#13,#2703);+#8006=ADVANCED_FACE('',(#8007),#8014,.T.);+#8007=FACE_BOUND('',#8008,.F.);+#8008=EDGE_LOOP('',(#8009,#5829,#8012,#8013));+#8009=ORIENTED_EDGE('',*,*,#8010,.T.);+#8010=EDGE_CURVE('',#5770,#5826,#8011,.T.);+#8011=LINE('',#5771,#845);+#8012=ORIENTED_EDGE('',*,*,#8000,.F.);+#8013=ORIENTED_EDGE('',*,*,#5774,.F.);+#8014=CYLINDRICAL_SURFACE('',#8015,0.2);+#8015=AXIS2_PLACEMENT_3D('',#5779,#2934,#2728);+#8016=ADVANCED_FACE('',(#8017),#8022,.F.);+#8017=FACE_BOUND('',#8018,.F.);+#8018=EDGE_LOOP('',(#8019,#5824,#8020,#8021));+#8019=ORIENTED_EDGE('',*,*,#7754,.T.);+#8020=ORIENTED_EDGE('',*,*,#8010,.F.);+#8021=ORIENTED_EDGE('',*,*,#5769,.F.);+#8022=PLANE('',#8023);+#8023=AXIS2_PLACEMENT_3D('',#5764,#5431,#2719);+#8024=ADVANCED_FACE('',(#8025),#8032,.F.);+#8025=FACE_BOUND('',#8026,.F.);+#8026=EDGE_LOOP('',(#8027,#5980,#8030,#8031));+#8027=ORIENTED_EDGE('',*,*,#8028,.T.);+#8028=EDGE_CURVE('',#5920,#5976,#8029,.T.);+#8029=LINE('',#5921,#845);+#8030=ORIENTED_EDGE('',*,*,#5996,.F.);+#8031=ORIENTED_EDGE('',*,*,#5925,.F.);+#8032=PLANE('',#8033);+#8033=AXIS2_PLACEMENT_3D('',#5921,#5370,#2758);+#8034=ADVANCED_FACE('',(#8035),#8042,.F.);+#8035=FACE_BOUND('',#8036,.F.);+#8036=EDGE_LOOP('',(#8037,#5974,#8040,#8041));+#8037=ORIENTED_EDGE('',*,*,#8038,.T.);+#8038=EDGE_CURVE('',#5915,#5971,#8039,.T.);+#8039=LINE('',#5916,#845);+#8040=ORIENTED_EDGE('',*,*,#8028,.F.);+#8041=ORIENTED_EDGE('',*,*,#5919,.F.);+#8042=CYLINDRICAL_SURFACE('',#8043,1.E-01);+#8043=AXIS2_PLACEMENT_3D('',#5902,#2934,#2751);+#8044=ADVANCED_FACE('',(#8045),#8052,.F.);+#8045=FACE_BOUND('',#8046,.F.);+#8046=EDGE_LOOP('',(#8047,#5969,#8050,#8051));+#8047=ORIENTED_EDGE('',*,*,#8048,.T.);+#8048=EDGE_CURVE('',#5910,#5966,#8049,.T.);+#8049=LINE('',#5911,#845);+#8050=ORIENTED_EDGE('',*,*,#8038,.F.);+#8051=ORIENTED_EDGE('',*,*,#5914,.F.);+#8052=PLANE('',#8053);+#8053=AXIS2_PLACEMENT_3D('',#5911,#273,#239);+#8054=ADVANCED_FACE('',(#8055),#8062,.F.);+#8055=FACE_BOUND('',#8056,.F.);+#8056=EDGE_LOOP('',(#8057,#5964,#8060,#8061));+#8057=ORIENTED_EDGE('',*,*,#8058,.T.);+#8058=EDGE_CURVE('',#5905,#5961,#8059,.T.);+#8059=LINE('',#5906,#845);+#8060=ORIENTED_EDGE('',*,*,#8048,.F.);+#8061=ORIENTED_EDGE('',*,*,#5909,.F.);+#8062=PLANE('',#8063);+#8063=AXIS2_PLACEMENT_3D('',#5906,#239,#13);+#8064=ADVANCED_FACE('',(#8065),#8072,.F.);+#8065=FACE_BOUND('',#8066,.F.);+#8066=EDGE_LOOP('',(#8067,#5959,#8070,#8071));+#8067=ORIENTED_EDGE('',*,*,#8068,.T.);+#8068=EDGE_CURVE('',#5898,#5954,#8069,.T.);+#8069=LINE('',#5899,#845);+#8070=ORIENTED_EDGE('',*,*,#8058,.F.);+#8071=ORIENTED_EDGE('',*,*,#5904,.F.);+#8072=PLANE('',#8073);+#8073=AXIS2_PLACEMENT_3D('',#5899,#13,#2703);+#8074=ADVANCED_FACE('',(#8075),#8082,.T.);+#8075=FACE_BOUND('',#8076,.F.);+#8076=EDGE_LOOP('',(#8077,#5952,#8080,#8081));+#8077=ORIENTED_EDGE('',*,*,#8078,.T.);+#8078=EDGE_CURVE('',#5893,#5949,#8079,.T.);+#8079=LINE('',#5894,#845);+#8080=ORIENTED_EDGE('',*,*,#8068,.F.);+#8081=ORIENTED_EDGE('',*,*,#5897,.F.);+#8082=CYLINDRICAL_SURFACE('',#8083,0.2);+#8083=AXIS2_PLACEMENT_3D('',#5902,#2934,#2728);+#8084=ADVANCED_FACE('',(#8085),#8090,.F.);+#8085=FACE_BOUND('',#8086,.F.);+#8086=EDGE_LOOP('',(#8087,#5947,#8088,#8089));+#8087=ORIENTED_EDGE('',*,*,#7764,.T.);+#8088=ORIENTED_EDGE('',*,*,#8078,.F.);+#8089=ORIENTED_EDGE('',*,*,#5892,.F.);+#8090=PLANE('',#8091);+#8091=AXIS2_PLACEMENT_3D('',#5887,#5431,#2719);+#8092=ADVANCED_FACE('',(#8093),#8100,.F.);+#8093=FACE_BOUND('',#8094,.F.);+#8094=EDGE_LOOP('',(#8095,#6103,#8098,#8099));+#8095=ORIENTED_EDGE('',*,*,#8096,.T.);+#8096=EDGE_CURVE('',#6043,#6099,#8097,.T.);+#8097=LINE('',#6044,#845);+#8098=ORIENTED_EDGE('',*,*,#6119,.F.);+#8099=ORIENTED_EDGE('',*,*,#6048,.F.);+#8100=PLANE('',#8101);+#8101=AXIS2_PLACEMENT_3D('',#6044,#5370,#2758);+#8102=ADVANCED_FACE('',(#8103),#8110,.F.);+#8103=FACE_BOUND('',#8104,.F.);+#8104=EDGE_LOOP('',(#8105,#6097,#8108,#8109));+#8105=ORIENTED_EDGE('',*,*,#8106,.T.);+#8106=EDGE_CURVE('',#6038,#6094,#8107,.T.);+#8107=LINE('',#6039,#845);+#8108=ORIENTED_EDGE('',*,*,#8096,.F.);+#8109=ORIENTED_EDGE('',*,*,#6042,.F.);+#8110=CYLINDRICAL_SURFACE('',#8111,1.E-01);+#8111=AXIS2_PLACEMENT_3D('',#6025,#2934,#2751);+#8112=ADVANCED_FACE('',(#8113),#8120,.F.);+#8113=FACE_BOUND('',#8114,.F.);+#8114=EDGE_LOOP('',(#8115,#6092,#8118,#8119));+#8115=ORIENTED_EDGE('',*,*,#8116,.T.);+#8116=EDGE_CURVE('',#6033,#6089,#8117,.T.);+#8117=LINE('',#6034,#845);+#8118=ORIENTED_EDGE('',*,*,#8106,.F.);+#8119=ORIENTED_EDGE('',*,*,#6037,.F.);+#8120=PLANE('',#8121);+#8121=AXIS2_PLACEMENT_3D('',#6034,#273,#239);+#8122=ADVANCED_FACE('',(#8123),#8130,.F.);+#8123=FACE_BOUND('',#8124,.F.);+#8124=EDGE_LOOP('',(#8125,#6087,#8128,#8129));+#8125=ORIENTED_EDGE('',*,*,#8126,.T.);+#8126=EDGE_CURVE('',#6028,#6084,#8127,.T.);+#8127=LINE('',#6029,#845);+#8128=ORIENTED_EDGE('',*,*,#8116,.F.);+#8129=ORIENTED_EDGE('',*,*,#6032,.F.);+#8130=PLANE('',#8131);+#8131=AXIS2_PLACEMENT_3D('',#6029,#239,#13);+#8132=ADVANCED_FACE('',(#8133),#8140,.F.);+#8133=FACE_BOUND('',#8134,.F.);+#8134=EDGE_LOOP('',(#8135,#6082,#8138,#8139));+#8135=ORIENTED_EDGE('',*,*,#8136,.T.);+#8136=EDGE_CURVE('',#6021,#6077,#8137,.T.);+#8137=LINE('',#6022,#845);+#8138=ORIENTED_EDGE('',*,*,#8126,.F.);+#8139=ORIENTED_EDGE('',*,*,#6027,.F.);+#8140=PLANE('',#8141);+#8141=AXIS2_PLACEMENT_3D('',#6022,#13,#2703);+#8142=ADVANCED_FACE('',(#8143),#8150,.T.);+#8143=FACE_BOUND('',#8144,.F.);+#8144=EDGE_LOOP('',(#8145,#6075,#8148,#8149));+#8145=ORIENTED_EDGE('',*,*,#8146,.T.);+#8146=EDGE_CURVE('',#6016,#6072,#8147,.T.);+#8147=LINE('',#6017,#845);+#8148=ORIENTED_EDGE('',*,*,#8136,.F.);+#8149=ORIENTED_EDGE('',*,*,#6020,.F.);+#8150=CYLINDRICAL_SURFACE('',#8151,0.2);+#8151=AXIS2_PLACEMENT_3D('',#6025,#2934,#2728);+#8152=ADVANCED_FACE('',(#8153),#8158,.F.);+#8153=FACE_BOUND('',#8154,.F.);+#8154=EDGE_LOOP('',(#8155,#6070,#8156,#8157));+#8155=ORIENTED_EDGE('',*,*,#7774,.T.);+#8156=ORIENTED_EDGE('',*,*,#8146,.F.);+#8157=ORIENTED_EDGE('',*,*,#6015,.F.);+#8158=PLANE('',#8159);+#8159=AXIS2_PLACEMENT_3D('',#6010,#5431,#2719);+#8160=ADVANCED_FACE('',(#8161),#8168,.F.);+#8161=FACE_BOUND('',#8162,.F.);+#8162=EDGE_LOOP('',(#8163,#6226,#8166,#8167));+#8163=ORIENTED_EDGE('',*,*,#8164,.T.);+#8164=EDGE_CURVE('',#6166,#6222,#8165,.T.);+#8165=LINE('',#6167,#845);+#8166=ORIENTED_EDGE('',*,*,#6242,.F.);+#8167=ORIENTED_EDGE('',*,*,#6171,.F.);+#8168=PLANE('',#8169);+#8169=AXIS2_PLACEMENT_3D('',#6167,#5370,#2758);+#8170=ADVANCED_FACE('',(#8171),#8178,.F.);+#8171=FACE_BOUND('',#8172,.F.);+#8172=EDGE_LOOP('',(#8173,#6220,#8176,#8177));+#8173=ORIENTED_EDGE('',*,*,#8174,.T.);+#8174=EDGE_CURVE('',#6161,#6217,#8175,.T.);+#8175=LINE('',#6162,#845);+#8176=ORIENTED_EDGE('',*,*,#8164,.F.);+#8177=ORIENTED_EDGE('',*,*,#6165,.F.);+#8178=CYLINDRICAL_SURFACE('',#8179,1.E-01);+#8179=AXIS2_PLACEMENT_3D('',#6148,#2934,#2751);+#8180=ADVANCED_FACE('',(#8181),#8188,.F.);+#8181=FACE_BOUND('',#8182,.F.);+#8182=EDGE_LOOP('',(#8183,#6215,#8186,#8187));+#8183=ORIENTED_EDGE('',*,*,#8184,.T.);+#8184=EDGE_CURVE('',#6156,#6212,#8185,.T.);+#8185=LINE('',#6157,#845);+#8186=ORIENTED_EDGE('',*,*,#8174,.F.);+#8187=ORIENTED_EDGE('',*,*,#6160,.F.);+#8188=PLANE('',#8189);+#8189=AXIS2_PLACEMENT_3D('',#6157,#273,#239);+#8190=ADVANCED_FACE('',(#8191),#8198,.F.);+#8191=FACE_BOUND('',#8192,.F.);+#8192=EDGE_LOOP('',(#8193,#6210,#8196,#8197));+#8193=ORIENTED_EDGE('',*,*,#8194,.T.);+#8194=EDGE_CURVE('',#6151,#6207,#8195,.T.);+#8195=LINE('',#6152,#845);+#8196=ORIENTED_EDGE('',*,*,#8184,.F.);+#8197=ORIENTED_EDGE('',*,*,#6155,.F.);+#8198=PLANE('',#8199);+#8199=AXIS2_PLACEMENT_3D('',#6152,#239,#13);+#8200=ADVANCED_FACE('',(#8201),#8208,.F.);+#8201=FACE_BOUND('',#8202,.F.);+#8202=EDGE_LOOP('',(#8203,#6205,#8206,#8207));+#8203=ORIENTED_EDGE('',*,*,#8204,.T.);+#8204=EDGE_CURVE('',#6144,#6200,#8205,.T.);+#8205=LINE('',#6145,#845);+#8206=ORIENTED_EDGE('',*,*,#8194,.F.);+#8207=ORIENTED_EDGE('',*,*,#6150,.F.);+#8208=PLANE('',#8209);+#8209=AXIS2_PLACEMENT_3D('',#6145,#13,#2703);+#8210=ADVANCED_FACE('',(#8211),#8218,.T.);+#8211=FACE_BOUND('',#8212,.F.);+#8212=EDGE_LOOP('',(#8213,#6198,#8216,#8217));+#8213=ORIENTED_EDGE('',*,*,#8214,.T.);+#8214=EDGE_CURVE('',#6139,#6195,#8215,.T.);+#8215=LINE('',#6140,#845);+#8216=ORIENTED_EDGE('',*,*,#8204,.F.);+#8217=ORIENTED_EDGE('',*,*,#6143,.F.);+#8218=CYLINDRICAL_SURFACE('',#8219,0.2);+#8219=AXIS2_PLACEMENT_3D('',#6148,#2934,#2728);+#8220=ADVANCED_FACE('',(#8221),#8226,.F.);+#8221=FACE_BOUND('',#8222,.F.);+#8222=EDGE_LOOP('',(#8223,#6193,#8224,#8225));+#8223=ORIENTED_EDGE('',*,*,#7784,.T.);+#8224=ORIENTED_EDGE('',*,*,#8214,.F.);+#8225=ORIENTED_EDGE('',*,*,#6138,.F.);+#8226=PLANE('',#8227);+#8227=AXIS2_PLACEMENT_3D('',#6133,#5431,#2719);+#8228=ADVANCED_FACE('',(#8229),#8236,.F.);+#8229=FACE_BOUND('',#8230,.F.);+#8230=EDGE_LOOP('',(#8231,#6349,#8234,#8235));+#8231=ORIENTED_EDGE('',*,*,#8232,.T.);+#8232=EDGE_CURVE('',#6289,#6345,#8233,.T.);+#8233=LINE('',#6290,#845);+#8234=ORIENTED_EDGE('',*,*,#6365,.F.);+#8235=ORIENTED_EDGE('',*,*,#6294,.F.);+#8236=PLANE('',#8237);+#8237=AXIS2_PLACEMENT_3D('',#6290,#5370,#2758);+#8238=ADVANCED_FACE('',(#8239),#8246,.F.);+#8239=FACE_BOUND('',#8240,.F.);+#8240=EDGE_LOOP('',(#8241,#6343,#8244,#8245));+#8241=ORIENTED_EDGE('',*,*,#8242,.T.);+#8242=EDGE_CURVE('',#6284,#6340,#8243,.T.);+#8243=LINE('',#6285,#845);+#8244=ORIENTED_EDGE('',*,*,#8232,.F.);+#8245=ORIENTED_EDGE('',*,*,#6288,.F.);+#8246=CYLINDRICAL_SURFACE('',#8247,1.E-01);+#8247=AXIS2_PLACEMENT_3D('',#6271,#2934,#2751);+#8248=ADVANCED_FACE('',(#8249),#8256,.F.);+#8249=FACE_BOUND('',#8250,.F.);+#8250=EDGE_LOOP('',(#8251,#6338,#8254,#8255));+#8251=ORIENTED_EDGE('',*,*,#8252,.T.);+#8252=EDGE_CURVE('',#6279,#6335,#8253,.T.);+#8253=LINE('',#6280,#845);+#8254=ORIENTED_EDGE('',*,*,#8242,.F.);+#8255=ORIENTED_EDGE('',*,*,#6283,.F.);+#8256=PLANE('',#8257);+#8257=AXIS2_PLACEMENT_3D('',#6280,#273,#239);+#8258=ADVANCED_FACE('',(#8259),#8266,.F.);+#8259=FACE_BOUND('',#8260,.F.);+#8260=EDGE_LOOP('',(#8261,#6333,#8264,#8265));+#8261=ORIENTED_EDGE('',*,*,#8262,.T.);+#8262=EDGE_CURVE('',#6274,#6330,#8263,.T.);+#8263=LINE('',#6275,#845);+#8264=ORIENTED_EDGE('',*,*,#8252,.F.);+#8265=ORIENTED_EDGE('',*,*,#6278,.F.);+#8266=PLANE('',#8267);+#8267=AXIS2_PLACEMENT_3D('',#6275,#239,#13);+#8268=ADVANCED_FACE('',(#8269),#8276,.F.);+#8269=FACE_BOUND('',#8270,.F.);+#8270=EDGE_LOOP('',(#8271,#6328,#8274,#8275));+#8271=ORIENTED_EDGE('',*,*,#8272,.T.);+#8272=EDGE_CURVE('',#6267,#6323,#8273,.T.);+#8273=LINE('',#6268,#845);+#8274=ORIENTED_EDGE('',*,*,#8262,.F.);+#8275=ORIENTED_EDGE('',*,*,#6273,.F.);+#8276=PLANE('',#8277);+#8277=AXIS2_PLACEMENT_3D('',#6268,#13,#2703);+#8278=ADVANCED_FACE('',(#8279),#8286,.T.);+#8279=FACE_BOUND('',#8280,.F.);+#8280=EDGE_LOOP('',(#8281,#6321,#8284,#8285));+#8281=ORIENTED_EDGE('',*,*,#8282,.T.);+#8282=EDGE_CURVE('',#6262,#6318,#8283,.T.);+#8283=LINE('',#6263,#845);+#8284=ORIENTED_EDGE('',*,*,#8272,.F.);+#8285=ORIENTED_EDGE('',*,*,#6266,.F.);+#8286=CYLINDRICAL_SURFACE('',#8287,0.2);+#8287=AXIS2_PLACEMENT_3D('',#6271,#2934,#2728);+#8288=ADVANCED_FACE('',(#8289),#8294,.F.);+#8289=FACE_BOUND('',#8290,.F.);+#8290=EDGE_LOOP('',(#8291,#6316,#8292,#8293));+#8291=ORIENTED_EDGE('',*,*,#7794,.T.);+#8292=ORIENTED_EDGE('',*,*,#8282,.F.);+#8293=ORIENTED_EDGE('',*,*,#6261,.F.);+#8294=PLANE('',#8295);+#8295=AXIS2_PLACEMENT_3D('',#6256,#5431,#2719);+#8296=ADVANCED_FACE('',(#8297),#8304,.F.);+#8297=FACE_BOUND('',#8298,.F.);+#8298=EDGE_LOOP('',(#8299,#6472,#8302,#8303));+#8299=ORIENTED_EDGE('',*,*,#8300,.T.);+#8300=EDGE_CURVE('',#6412,#6468,#8301,.T.);+#8301=LINE('',#6413,#845);+#8302=ORIENTED_EDGE('',*,*,#6488,.F.);+#8303=ORIENTED_EDGE('',*,*,#6417,.F.);+#8304=PLANE('',#8305);+#8305=AXIS2_PLACEMENT_3D('',#6413,#5370,#2758);+#8306=ADVANCED_FACE('',(#8307),#8314,.F.);+#8307=FACE_BOUND('',#8308,.F.);+#8308=EDGE_LOOP('',(#8309,#6466,#8312,#8313));+#8309=ORIENTED_EDGE('',*,*,#8310,.T.);+#8310=EDGE_CURVE('',#6407,#6463,#8311,.T.);+#8311=LINE('',#6408,#845);+#8312=ORIENTED_EDGE('',*,*,#8300,.F.);+#8313=ORIENTED_EDGE('',*,*,#6411,.F.);+#8314=CYLINDRICAL_SURFACE('',#8315,1.E-01);+#8315=AXIS2_PLACEMENT_3D('',#6394,#2934,#2751);+#8316=ADVANCED_FACE('',(#8317),#8324,.F.);+#8317=FACE_BOUND('',#8318,.F.);+#8318=EDGE_LOOP('',(#8319,#6461,#8322,#8323));+#8319=ORIENTED_EDGE('',*,*,#8320,.T.);+#8320=EDGE_CURVE('',#6402,#6458,#8321,.T.);+#8321=LINE('',#6403,#845);+#8322=ORIENTED_EDGE('',*,*,#8310,.F.);+#8323=ORIENTED_EDGE('',*,*,#6406,.F.);+#8324=PLANE('',#8325);+#8325=AXIS2_PLACEMENT_3D('',#6403,#273,#239);+#8326=ADVANCED_FACE('',(#8327),#8334,.F.);+#8327=FACE_BOUND('',#8328,.F.);+#8328=EDGE_LOOP('',(#8329,#6456,#8332,#8333));+#8329=ORIENTED_EDGE('',*,*,#8330,.T.);+#8330=EDGE_CURVE('',#6397,#6453,#8331,.T.);+#8331=LINE('',#6398,#845);+#8332=ORIENTED_EDGE('',*,*,#8320,.F.);+#8333=ORIENTED_EDGE('',*,*,#6401,.F.);+#8334=PLANE('',#8335);+#8335=AXIS2_PLACEMENT_3D('',#6398,#239,#13);+#8336=ADVANCED_FACE('',(#8337),#8344,.F.);+#8337=FACE_BOUND('',#8338,.F.);+#8338=EDGE_LOOP('',(#8339,#6451,#8342,#8343));+#8339=ORIENTED_EDGE('',*,*,#8340,.T.);+#8340=EDGE_CURVE('',#6390,#6446,#8341,.T.);+#8341=LINE('',#6391,#845);+#8342=ORIENTED_EDGE('',*,*,#8330,.F.);+#8343=ORIENTED_EDGE('',*,*,#6396,.F.);+#8344=PLANE('',#8345);+#8345=AXIS2_PLACEMENT_3D('',#6391,#13,#2703);+#8346=ADVANCED_FACE('',(#8347),#8354,.T.);+#8347=FACE_BOUND('',#8348,.F.);+#8348=EDGE_LOOP('',(#8349,#6444,#8352,#8353));+#8349=ORIENTED_EDGE('',*,*,#8350,.T.);+#8350=EDGE_CURVE('',#6385,#6441,#8351,.T.);+#8351=LINE('',#6386,#845);+#8352=ORIENTED_EDGE('',*,*,#8340,.F.);+#8353=ORIENTED_EDGE('',*,*,#6389,.F.);+#8354=CYLINDRICAL_SURFACE('',#8355,0.2);+#8355=AXIS2_PLACEMENT_3D('',#6394,#2934,#2728);+#8356=ADVANCED_FACE('',(#8357),#8362,.F.);+#8357=FACE_BOUND('',#8358,.F.);+#8358=EDGE_LOOP('',(#8359,#6439,#8360,#8361));+#8359=ORIENTED_EDGE('',*,*,#7804,.T.);+#8360=ORIENTED_EDGE('',*,*,#8350,.F.);+#8361=ORIENTED_EDGE('',*,*,#6384,.F.);+#8362=PLANE('',#8363);+#8363=AXIS2_PLACEMENT_3D('',#6379,#5431,#2719);+#8364=ADVANCED_FACE('',(#8365),#8372,.F.);+#8365=FACE_BOUND('',#8366,.F.);+#8366=EDGE_LOOP('',(#8367,#6595,#8370,#8371));+#8367=ORIENTED_EDGE('',*,*,#8368,.T.);+#8368=EDGE_CURVE('',#6535,#6591,#8369,.T.);+#8369=LINE('',#6536,#845);+#8370=ORIENTED_EDGE('',*,*,#6611,.F.);+#8371=ORIENTED_EDGE('',*,*,#6540,.F.);+#8372=PLANE('',#8373);+#8373=AXIS2_PLACEMENT_3D('',#6536,#5370,#2758);+#8374=ADVANCED_FACE('',(#8375),#8382,.F.);+#8375=FACE_BOUND('',#8376,.F.);+#8376=EDGE_LOOP('',(#8377,#6589,#8380,#8381));+#8377=ORIENTED_EDGE('',*,*,#8378,.T.);+#8378=EDGE_CURVE('',#6530,#6586,#8379,.T.);+#8379=LINE('',#6531,#845);+#8380=ORIENTED_EDGE('',*,*,#8368,.F.);+#8381=ORIENTED_EDGE('',*,*,#6534,.F.);+#8382=CYLINDRICAL_SURFACE('',#8383,1.E-01);+#8383=AXIS2_PLACEMENT_3D('',#6517,#2934,#2751);+#8384=ADVANCED_FACE('',(#8385),#8392,.F.);+#8385=FACE_BOUND('',#8386,.F.);+#8386=EDGE_LOOP('',(#8387,#6584,#8390,#8391));+#8387=ORIENTED_EDGE('',*,*,#8388,.T.);+#8388=EDGE_CURVE('',#6525,#6581,#8389,.T.);+#8389=LINE('',#6526,#845);+#8390=ORIENTED_EDGE('',*,*,#8378,.F.);+#8391=ORIENTED_EDGE('',*,*,#6529,.F.);+#8392=PLANE('',#8393);+#8393=AXIS2_PLACEMENT_3D('',#6526,#273,#239);+#8394=ADVANCED_FACE('',(#8395),#8402,.F.);+#8395=FACE_BOUND('',#8396,.F.);+#8396=EDGE_LOOP('',(#8397,#6579,#8400,#8401));+#8397=ORIENTED_EDGE('',*,*,#8398,.T.);+#8398=EDGE_CURVE('',#6520,#6576,#8399,.T.);+#8399=LINE('',#6521,#845);+#8400=ORIENTED_EDGE('',*,*,#8388,.F.);+#8401=ORIENTED_EDGE('',*,*,#6524,.F.);+#8402=PLANE('',#8403);+#8403=AXIS2_PLACEMENT_3D('',#6521,#239,#13);+#8404=ADVANCED_FACE('',(#8405),#8412,.F.);+#8405=FACE_BOUND('',#8406,.F.);+#8406=EDGE_LOOP('',(#8407,#6574,#8410,#8411));+#8407=ORIENTED_EDGE('',*,*,#8408,.T.);+#8408=EDGE_CURVE('',#6513,#6569,#8409,.T.);+#8409=LINE('',#6514,#845);+#8410=ORIENTED_EDGE('',*,*,#8398,.F.);+#8411=ORIENTED_EDGE('',*,*,#6519,.F.);+#8412=PLANE('',#8413);+#8413=AXIS2_PLACEMENT_3D('',#6514,#13,#2703);+#8414=ADVANCED_FACE('',(#8415),#8422,.T.);+#8415=FACE_BOUND('',#8416,.F.);+#8416=EDGE_LOOP('',(#8417,#6567,#8420,#8421));+#8417=ORIENTED_EDGE('',*,*,#8418,.T.);+#8418=EDGE_CURVE('',#6508,#6564,#8419,.T.);+#8419=LINE('',#6509,#845);+#8420=ORIENTED_EDGE('',*,*,#8408,.F.);+#8421=ORIENTED_EDGE('',*,*,#6512,.F.);+#8422=CYLINDRICAL_SURFACE('',#8423,0.2);+#8423=AXIS2_PLACEMENT_3D('',#6517,#2934,#2728);+#8424=ADVANCED_FACE('',(#8425),#8430,.F.);+#8425=FACE_BOUND('',#8426,.F.);+#8426=EDGE_LOOP('',(#8427,#6562,#8428,#8429));+#8427=ORIENTED_EDGE('',*,*,#7814,.T.);+#8428=ORIENTED_EDGE('',*,*,#8418,.F.);+#8429=ORIENTED_EDGE('',*,*,#6507,.F.);+#8430=PLANE('',#8431);+#8431=AXIS2_PLACEMENT_3D('',#6502,#5431,#2719);+#8432=ADVANCED_FACE('',(#8433),#5320,.F.);+#8433=FACE_BOUND('',#8434,.F.);+#8434=EDGE_LOOP('',(#7611,#8435,#8436,#8440));+#8435=ORIENTED_EDGE('',*,*,#7743,.T.);+#8436=ORIENTED_EDGE('',*,*,#8437,.T.);+#8437=EDGE_CURVE('',#7740,#6789,#8438,.T.);+#8438=LINE('',#8439,#822);+#8439=CARTESIAN_POINT('',(2.185,-3.5,0.478548768437));+#8440=ORIENTED_EDGE('',*,*,#6788,.F.);+#8441=ADVANCED_FACE('',(#8442),#8501,.F.);+#8442=FACE_BOUND('',#8443,.F.);+#8443=EDGE_LOOP('',(#8444,#8445,#8451,#8458,#8463,#8470,#8475,#8480,#8485,#8491,#8496,#8500));+#8444=ORIENTED_EDGE('',*,*,#8437,.F.);+#8445=ORIENTED_EDGE('',*,*,#8446,.T.);+#8446=EDGE_CURVE('',#7740,#8447,#8449,.T.);+#8447=VERTEX_POINT('',#8448);+#8448=CARTESIAN_POINT('',(2.185,-3.7,0.55));+#8449=LINE('',#8450,#7544);+#8450=CARTESIAN_POINT('',(2.185,-3.35,0.55));+#8451=ORIENTED_EDGE('',*,*,#8452,.T.);+#8452=EDGE_CURVE('',#8447,#8453,#8455,.T.);+#8453=VERTEX_POINT('',#8454);+#8454=CARTESIAN_POINT('',(2.185,-3.798480775301,0.467364817767));+#8455=CIRCLE('',#8456,0.1);+#8456=AXIS2_PLACEMENT_3D('',#8457,#7553,#7554);+#8457=CARTESIAN_POINT('',(2.185,-3.7,0.45));+#8458=ORIENTED_EDGE('',*,*,#8459,.T.);+#8459=EDGE_CURVE('',#8453,#8460,#8462,.T.);+#8460=VERTEX_POINT('',#8461);+#8461=CARTESIAN_POINT('',(2.185,-3.847120194575,0.165270364467));+#8462=LINE('',#8454,#7560);+#8463=ORIENTED_EDGE('',*,*,#8464,.T.);+#8464=EDGE_CURVE('',#8460,#8465,#8467,.T.);+#8465=VERTEX_POINT('',#8466);+#8466=CARTESIAN_POINT('',(2.185,-4.044081745177,-2.22044604925E-16));+#8467=CIRCLE('',#8468,0.2);+#8468=AXIS2_PLACEMENT_3D('',#8469,#5290,#7569);+#8469=CARTESIAN_POINT('',(2.185,-4.044081745177,0.2));+#8470=ORIENTED_EDGE('',*,*,#8471,.T.);+#8471=EDGE_CURVE('',#8465,#8472,#8474,.T.);+#8472=VERTEX_POINT('',#8473);+#8473=CARTESIAN_POINT('',(2.185,-4.5,-2.22044604925E-16));+#8474=LINE('',#8466,#7544);+#8475=ORIENTED_EDGE('',*,*,#8476,.T.);+#8476=EDGE_CURVE('',#8472,#8477,#8479,.T.);+#8477=VERTEX_POINT('',#8478);+#8478=CARTESIAN_POINT('',(2.185,-4.5,1.E-01));+#8479=LINE('',#8473,#822);+#8480=ORIENTED_EDGE('',*,*,#8481,.T.);+#8481=EDGE_CURVE('',#8477,#8482,#8484,.T.);+#8482=VERTEX_POINT('',#8483);+#8483=CARTESIAN_POINT('',(2.185,-4.044081745177,1.E-01));+#8484=LINE('',#8478,#2556);+#8485=ORIENTED_EDGE('',*,*,#8486,.T.);+#8486=EDGE_CURVE('',#8482,#8487,#8489,.T.);+#8487=VERTEX_POINT('',#8488);+#8488=CARTESIAN_POINT('',(2.185,-3.945600969876,0.182635182233));+#8489=CIRCLE('',#8490,1.E-01);+#8490=AXIS2_PLACEMENT_3D('',#8469,#7553,#7591);+#8491=ORIENTED_EDGE('',*,*,#8492,.T.);+#8492=EDGE_CURVE('',#8487,#8493,#8495,.T.);+#8493=VERTEX_POINT('',#8494);+#8494=CARTESIAN_POINT('',(2.185,-3.896961550602,0.484729635533));+#8495=LINE('',#8488,#7597);+#8496=ORIENTED_EDGE('',*,*,#8497,.T.);+#8497=EDGE_CURVE('',#8493,#6802,#8498,.T.);+#8498=CIRCLE('',#8499,0.2);+#8499=AXIS2_PLACEMENT_3D('',#8457,#5290,#7603);+#8500=ORIENTED_EDGE('',*,*,#6801,.T.);+#8501=PLANE('',#8502);+#8502=AXIS2_PLACEMENT_3D('',#8503,#5290,#13);+#8503=CARTESIAN_POINT('',(2.185,-3.912728288784,0.307097536874));+#8504=ADVANCED_FACE('',(#8505),#8566,.T.);+#8505=FACE_BOUND('',#8506,.T.);+#8506=EDGE_LOOP('',(#8507,#8511,#8517,#8524,#8529,#8536,#8541,#8546,#8551,#8557,#8562,#6808));+#8507=ORIENTED_EDGE('',*,*,#8508,.F.);+#8508=EDGE_CURVE('',#7736,#6810,#8509,.T.);+#8509=LINE('',#8510,#822);+#8510=CARTESIAN_POINT('',(1.815,-3.5,0.478548768437));+#8511=ORIENTED_EDGE('',*,*,#8512,.T.);+#8512=EDGE_CURVE('',#7736,#8513,#8515,.T.);+#8513=VERTEX_POINT('',#8514);+#8514=CARTESIAN_POINT('',(1.815,-3.7,0.55));+#8515=LINE('',#8516,#7544);+#8516=CARTESIAN_POINT('',(1.815,-3.35,0.55));+#8517=ORIENTED_EDGE('',*,*,#8518,.T.);+#8518=EDGE_CURVE('',#8513,#8519,#8521,.T.);+#8519=VERTEX_POINT('',#8520);+#8520=CARTESIAN_POINT('',(1.815,-3.798480775301,0.467364817767));+#8521=CIRCLE('',#8522,0.1);+#8522=AXIS2_PLACEMENT_3D('',#8523,#7553,#7554);+#8523=CARTESIAN_POINT('',(1.815,-3.7,0.45));+#8524=ORIENTED_EDGE('',*,*,#8525,.T.);+#8525=EDGE_CURVE('',#8519,#8526,#8528,.T.);+#8526=VERTEX_POINT('',#8527);+#8527=CARTESIAN_POINT('',(1.815,-3.847120194575,0.165270364467));+#8528=LINE('',#8520,#7560);+#8529=ORIENTED_EDGE('',*,*,#8530,.T.);+#8530=EDGE_CURVE('',#8526,#8531,#8533,.T.);+#8531=VERTEX_POINT('',#8532);+#8532=CARTESIAN_POINT('',(1.815,-4.044081745177,-2.22044604925E-16));+#8533=CIRCLE('',#8534,0.2);+#8534=AXIS2_PLACEMENT_3D('',#8535,#5290,#7569);+#8535=CARTESIAN_POINT('',(1.815,-4.044081745177,0.2));+#8536=ORIENTED_EDGE('',*,*,#8537,.T.);+#8537=EDGE_CURVE('',#8531,#8538,#8540,.T.);+#8538=VERTEX_POINT('',#8539);+#8539=CARTESIAN_POINT('',(1.815,-4.5,-2.22044604925E-16));+#8540=LINE('',#8532,#7544);+#8541=ORIENTED_EDGE('',*,*,#8542,.T.);+#8542=EDGE_CURVE('',#8538,#8543,#8545,.T.);+#8543=VERTEX_POINT('',#8544);+#8544=CARTESIAN_POINT('',(1.815,-4.5,1.E-01));+#8545=LINE('',#8539,#822);+#8546=ORIENTED_EDGE('',*,*,#8547,.T.);+#8547=EDGE_CURVE('',#8543,#8548,#8550,.T.);+#8548=VERTEX_POINT('',#8549);+#8549=CARTESIAN_POINT('',(1.815,-4.044081745177,1.E-01));+#8550=LINE('',#8544,#2556);+#8551=ORIENTED_EDGE('',*,*,#8552,.T.);+#8552=EDGE_CURVE('',#8548,#8553,#8555,.T.);+#8553=VERTEX_POINT('',#8554);+#8554=CARTESIAN_POINT('',(1.815,-3.945600969876,0.182635182233));+#8555=CIRCLE('',#8556,1.E-01);+#8556=AXIS2_PLACEMENT_3D('',#8535,#7553,#7591);+#8557=ORIENTED_EDGE('',*,*,#8558,.T.);+#8558=EDGE_CURVE('',#8553,#8559,#8561,.T.);+#8559=VERTEX_POINT('',#8560);+#8560=CARTESIAN_POINT('',(1.815,-3.896961550602,0.484729635533));+#8561=LINE('',#8554,#7597);+#8562=ORIENTED_EDGE('',*,*,#8563,.T.);+#8563=EDGE_CURVE('',#8559,#6805,#8564,.T.);+#8564=CIRCLE('',#8565,0.2);+#8565=AXIS2_PLACEMENT_3D('',#8523,#5290,#7603);+#8566=PLANE('',#8567);+#8567=AXIS2_PLACEMENT_3D('',#8568,#5290,#13);+#8568=CARTESIAN_POINT('',(1.815,-3.912728288784,0.307097536874));+#8569=ADVANCED_FACE('',(#8570),#8577,.T.);+#8570=FACE_BOUND('',#8571,.F.);+#8571=EDGE_LOOP('',(#8572,#8562,#8575,#8576));+#8572=ORIENTED_EDGE('',*,*,#8573,.T.);+#8573=EDGE_CURVE('',#8493,#8559,#8574,.T.);+#8574=LINE('',#8494,#5289);+#8575=ORIENTED_EDGE('',*,*,#6804,.F.);+#8576=ORIENTED_EDGE('',*,*,#8497,.F.);+#8577=CYLINDRICAL_SURFACE('',#8578,0.2);+#8578=AXIS2_PLACEMENT_3D('',#8457,#7553,#7603);+#8579=ADVANCED_FACE('',(#8580),#5320,.F.);+#8580=FACE_BOUND('',#8581,.F.);+#8581=EDGE_LOOP('',(#8507,#8582,#8583,#8587));+#8582=ORIENTED_EDGE('',*,*,#7735,.T.);+#8583=ORIENTED_EDGE('',*,*,#8584,.T.);+#8584=EDGE_CURVE('',#7732,#6824,#8585,.T.);+#8585=LINE('',#8586,#822);+#8586=CARTESIAN_POINT('',(1.385,-3.5,0.478548768437));+#8587=ORIENTED_EDGE('',*,*,#6823,.F.);+#8588=ADVANCED_FACE('',(#8589),#8648,.F.);+#8589=FACE_BOUND('',#8590,.F.);+#8590=EDGE_LOOP('',(#8591,#8592,#8598,#8605,#8610,#8617,#8622,#8627,#8632,#8638,#8643,#8647));+#8591=ORIENTED_EDGE('',*,*,#8584,.F.);+#8592=ORIENTED_EDGE('',*,*,#8593,.T.);+#8593=EDGE_CURVE('',#7732,#8594,#8596,.T.);+#8594=VERTEX_POINT('',#8595);+#8595=CARTESIAN_POINT('',(1.385,-3.7,0.55));+#8596=LINE('',#8597,#7544);+#8597=CARTESIAN_POINT('',(1.385,-3.35,0.55));+#8598=ORIENTED_EDGE('',*,*,#8599,.T.);+#8599=EDGE_CURVE('',#8594,#8600,#8602,.T.);+#8600=VERTEX_POINT('',#8601);+#8601=CARTESIAN_POINT('',(1.385,-3.798480775301,0.467364817767));+#8602=CIRCLE('',#8603,0.1);+#8603=AXIS2_PLACEMENT_3D('',#8604,#7553,#7554);+#8604=CARTESIAN_POINT('',(1.385,-3.7,0.45));+#8605=ORIENTED_EDGE('',*,*,#8606,.T.);+#8606=EDGE_CURVE('',#8600,#8607,#8609,.T.);+#8607=VERTEX_POINT('',#8608);+#8608=CARTESIAN_POINT('',(1.385,-3.847120194575,0.165270364467));+#8609=LINE('',#8601,#7560);+#8610=ORIENTED_EDGE('',*,*,#8611,.T.);+#8611=EDGE_CURVE('',#8607,#8612,#8614,.T.);+#8612=VERTEX_POINT('',#8613);+#8613=CARTESIAN_POINT('',(1.385,-4.044081745177,-2.22044604925E-16));+#8614=CIRCLE('',#8615,0.2);+#8615=AXIS2_PLACEMENT_3D('',#8616,#5290,#7569);+#8616=CARTESIAN_POINT('',(1.385,-4.044081745177,0.2));+#8617=ORIENTED_EDGE('',*,*,#8618,.T.);+#8618=EDGE_CURVE('',#8612,#8619,#8621,.T.);+#8619=VERTEX_POINT('',#8620);+#8620=CARTESIAN_POINT('',(1.385,-4.5,-2.22044604925E-16));+#8621=LINE('',#8613,#7544);+#8622=ORIENTED_EDGE('',*,*,#8623,.T.);+#8623=EDGE_CURVE('',#8619,#8624,#8626,.T.);+#8624=VERTEX_POINT('',#8625);+#8625=CARTESIAN_POINT('',(1.385,-4.5,1.E-01));+#8626=LINE('',#8620,#822);+#8627=ORIENTED_EDGE('',*,*,#8628,.T.);+#8628=EDGE_CURVE('',#8624,#8629,#8631,.T.);+#8629=VERTEX_POINT('',#8630);+#8630=CARTESIAN_POINT('',(1.385,-4.044081745177,1.E-01));+#8631=LINE('',#8625,#2556);+#8632=ORIENTED_EDGE('',*,*,#8633,.T.);+#8633=EDGE_CURVE('',#8629,#8634,#8636,.T.);+#8634=VERTEX_POINT('',#8635);+#8635=CARTESIAN_POINT('',(1.385,-3.945600969876,0.182635182233));+#8636=CIRCLE('',#8637,1.E-01);+#8637=AXIS2_PLACEMENT_3D('',#8616,#7553,#7591);+#8638=ORIENTED_EDGE('',*,*,#8639,.T.);+#8639=EDGE_CURVE('',#8634,#8640,#8642,.T.);+#8640=VERTEX_POINT('',#8641);+#8641=CARTESIAN_POINT('',(1.385,-3.896961550602,0.484729635533));+#8642=LINE('',#8635,#7597);+#8643=ORIENTED_EDGE('',*,*,#8644,.T.);+#8644=EDGE_CURVE('',#8640,#6837,#8645,.T.);+#8645=CIRCLE('',#8646,0.2);+#8646=AXIS2_PLACEMENT_3D('',#8604,#5290,#7603);+#8647=ORIENTED_EDGE('',*,*,#6836,.T.);+#8648=PLANE('',#8649);+#8649=AXIS2_PLACEMENT_3D('',#8650,#5290,#13);+#8650=CARTESIAN_POINT('',(1.385,-3.912728288784,0.307097536874));+#8651=ADVANCED_FACE('',(#8652),#8713,.T.);+#8652=FACE_BOUND('',#8653,.T.);+#8653=EDGE_LOOP('',(#8654,#8658,#8664,#8671,#8676,#8683,#8688,#8693,#8698,#8704,#8709,#6843));+#8654=ORIENTED_EDGE('',*,*,#8655,.F.);+#8655=EDGE_CURVE('',#7728,#6845,#8656,.T.);+#8656=LINE('',#8657,#822);+#8657=CARTESIAN_POINT('',(1.015,-3.5,0.478548768437));+#8658=ORIENTED_EDGE('',*,*,#8659,.T.);+#8659=EDGE_CURVE('',#7728,#8660,#8662,.T.);+#8660=VERTEX_POINT('',#8661);+#8661=CARTESIAN_POINT('',(1.015,-3.7,0.55));+#8662=LINE('',#8663,#7544);+#8663=CARTESIAN_POINT('',(1.015,-3.35,0.55));+#8664=ORIENTED_EDGE('',*,*,#8665,.T.);+#8665=EDGE_CURVE('',#8660,#8666,#8668,.T.);+#8666=VERTEX_POINT('',#8667);+#8667=CARTESIAN_POINT('',(1.015,-3.798480775301,0.467364817767));+#8668=CIRCLE('',#8669,0.1);+#8669=AXIS2_PLACEMENT_3D('',#8670,#7553,#7554);+#8670=CARTESIAN_POINT('',(1.015,-3.7,0.45));+#8671=ORIENTED_EDGE('',*,*,#8672,.T.);+#8672=EDGE_CURVE('',#8666,#8673,#8675,.T.);+#8673=VERTEX_POINT('',#8674);+#8674=CARTESIAN_POINT('',(1.015,-3.847120194575,0.165270364467));+#8675=LINE('',#8667,#7560);+#8676=ORIENTED_EDGE('',*,*,#8677,.T.);+#8677=EDGE_CURVE('',#8673,#8678,#8680,.T.);+#8678=VERTEX_POINT('',#8679);+#8679=CARTESIAN_POINT('',(1.015,-4.044081745177,-2.22044604925E-16));+#8680=CIRCLE('',#8681,0.2);+#8681=AXIS2_PLACEMENT_3D('',#8682,#5290,#7569);+#8682=CARTESIAN_POINT('',(1.015,-4.044081745177,0.2));+#8683=ORIENTED_EDGE('',*,*,#8684,.T.);+#8684=EDGE_CURVE('',#8678,#8685,#8687,.T.);+#8685=VERTEX_POINT('',#8686);+#8686=CARTESIAN_POINT('',(1.015,-4.5,-2.22044604925E-16));+#8687=LINE('',#8679,#7544);+#8688=ORIENTED_EDGE('',*,*,#8689,.T.);+#8689=EDGE_CURVE('',#8685,#8690,#8692,.T.);+#8690=VERTEX_POINT('',#8691);+#8691=CARTESIAN_POINT('',(1.015,-4.5,1.E-01));+#8692=LINE('',#8686,#822);+#8693=ORIENTED_EDGE('',*,*,#8694,.T.);+#8694=EDGE_CURVE('',#8690,#8695,#8697,.T.);+#8695=VERTEX_POINT('',#8696);+#8696=CARTESIAN_POINT('',(1.015,-4.044081745177,1.E-01));+#8697=LINE('',#8691,#2556);+#8698=ORIENTED_EDGE('',*,*,#8699,.T.);+#8699=EDGE_CURVE('',#8695,#8700,#8702,.T.);+#8700=VERTEX_POINT('',#8701);+#8701=CARTESIAN_POINT('',(1.015,-3.945600969876,0.182635182233));+#8702=CIRCLE('',#8703,1.E-01);+#8703=AXIS2_PLACEMENT_3D('',#8682,#7553,#7591);+#8704=ORIENTED_EDGE('',*,*,#8705,.T.);+#8705=EDGE_CURVE('',#8700,#8706,#8708,.T.);+#8706=VERTEX_POINT('',#8707);+#8707=CARTESIAN_POINT('',(1.015,-3.896961550602,0.484729635533));+#8708=LINE('',#8701,#7597);+#8709=ORIENTED_EDGE('',*,*,#8710,.T.);+#8710=EDGE_CURVE('',#8706,#6840,#8711,.T.);+#8711=CIRCLE('',#8712,0.2);+#8712=AXIS2_PLACEMENT_3D('',#8670,#5290,#7603);+#8713=PLANE('',#8714);+#8714=AXIS2_PLACEMENT_3D('',#8715,#5290,#13);+#8715=CARTESIAN_POINT('',(1.015,-3.912728288784,0.307097536874));+#8716=ADVANCED_FACE('',(#8717),#8724,.T.);+#8717=FACE_BOUND('',#8718,.F.);+#8718=EDGE_LOOP('',(#8719,#8709,#8722,#8723));+#8719=ORIENTED_EDGE('',*,*,#8720,.T.);+#8720=EDGE_CURVE('',#8640,#8706,#8721,.T.);+#8721=LINE('',#8641,#5289);+#8722=ORIENTED_EDGE('',*,*,#6839,.F.);+#8723=ORIENTED_EDGE('',*,*,#8644,.F.);+#8724=CYLINDRICAL_SURFACE('',#8725,0.2);+#8725=AXIS2_PLACEMENT_3D('',#8604,#7553,#7603);+#8726=ADVANCED_FACE('',(#8727),#5320,.F.);+#8727=FACE_BOUND('',#8728,.F.);+#8728=EDGE_LOOP('',(#8654,#8729,#8730,#8734));+#8729=ORIENTED_EDGE('',*,*,#7727,.T.);+#8730=ORIENTED_EDGE('',*,*,#8731,.T.);+#8731=EDGE_CURVE('',#7724,#6859,#8732,.T.);+#8732=LINE('',#8733,#822);+#8733=CARTESIAN_POINT('',(0.585,-3.5,0.478548768437));+#8734=ORIENTED_EDGE('',*,*,#6858,.F.);+#8735=ADVANCED_FACE('',(#8736),#8795,.F.);+#8736=FACE_BOUND('',#8737,.F.);+#8737=EDGE_LOOP('',(#8738,#8739,#8745,#8752,#8757,#8764,#8769,#8774,#8779,#8785,#8790,#8794));+#8738=ORIENTED_EDGE('',*,*,#8731,.F.);+#8739=ORIENTED_EDGE('',*,*,#8740,.T.);+#8740=EDGE_CURVE('',#7724,#8741,#8743,.T.);+#8741=VERTEX_POINT('',#8742);+#8742=CARTESIAN_POINT('',(0.585,-3.7,0.55));+#8743=LINE('',#8744,#7544);+#8744=CARTESIAN_POINT('',(0.585,-3.35,0.55));+#8745=ORIENTED_EDGE('',*,*,#8746,.T.);+#8746=EDGE_CURVE('',#8741,#8747,#8749,.T.);+#8747=VERTEX_POINT('',#8748);+#8748=CARTESIAN_POINT('',(0.585,-3.798480775301,0.467364817767));+#8749=CIRCLE('',#8750,0.1);+#8750=AXIS2_PLACEMENT_3D('',#8751,#7553,#7554);+#8751=CARTESIAN_POINT('',(0.585,-3.7,0.45));+#8752=ORIENTED_EDGE('',*,*,#8753,.T.);+#8753=EDGE_CURVE('',#8747,#8754,#8756,.T.);+#8754=VERTEX_POINT('',#8755);+#8755=CARTESIAN_POINT('',(0.585,-3.847120194575,0.165270364467));+#8756=LINE('',#8748,#7560);+#8757=ORIENTED_EDGE('',*,*,#8758,.T.);+#8758=EDGE_CURVE('',#8754,#8759,#8761,.T.);+#8759=VERTEX_POINT('',#8760);+#8760=CARTESIAN_POINT('',(0.585,-4.044081745177,-2.22044604925E-16));+#8761=CIRCLE('',#8762,0.2);+#8762=AXIS2_PLACEMENT_3D('',#8763,#5290,#7569);+#8763=CARTESIAN_POINT('',(0.585,-4.044081745177,0.2));+#8764=ORIENTED_EDGE('',*,*,#8765,.T.);+#8765=EDGE_CURVE('',#8759,#8766,#8768,.T.);+#8766=VERTEX_POINT('',#8767);+#8767=CARTESIAN_POINT('',(0.585,-4.5,-2.22044604925E-16));+#8768=LINE('',#8760,#7544);+#8769=ORIENTED_EDGE('',*,*,#8770,.T.);+#8770=EDGE_CURVE('',#8766,#8771,#8773,.T.);+#8771=VERTEX_POINT('',#8772);+#8772=CARTESIAN_POINT('',(0.585,-4.5,1.E-01));+#8773=LINE('',#8767,#822);+#8774=ORIENTED_EDGE('',*,*,#8775,.T.);+#8775=EDGE_CURVE('',#8771,#8776,#8778,.T.);+#8776=VERTEX_POINT('',#8777);+#8777=CARTESIAN_POINT('',(0.585,-4.044081745177,1.E-01));+#8778=LINE('',#8772,#2556);+#8779=ORIENTED_EDGE('',*,*,#8780,.T.);+#8780=EDGE_CURVE('',#8776,#8781,#8783,.T.);+#8781=VERTEX_POINT('',#8782);+#8782=CARTESIAN_POINT('',(0.585,-3.945600969876,0.182635182233));+#8783=CIRCLE('',#8784,1.E-01);+#8784=AXIS2_PLACEMENT_3D('',#8763,#7553,#7591);+#8785=ORIENTED_EDGE('',*,*,#8786,.T.);+#8786=EDGE_CURVE('',#8781,#8787,#8789,.T.);+#8787=VERTEX_POINT('',#8788);+#8788=CARTESIAN_POINT('',(0.585,-3.896961550602,0.484729635533));+#8789=LINE('',#8782,#7597);+#8790=ORIENTED_EDGE('',*,*,#8791,.T.);+#8791=EDGE_CURVE('',#8787,#6872,#8792,.T.);+#8792=CIRCLE('',#8793,0.2);+#8793=AXIS2_PLACEMENT_3D('',#8751,#5290,#7603);+#8794=ORIENTED_EDGE('',*,*,#6871,.T.);+#8795=PLANE('',#8796);+#8796=AXIS2_PLACEMENT_3D('',#8797,#5290,#13);+#8797=CARTESIAN_POINT('',(0.585,-3.912728288784,0.307097536874));+#8798=ADVANCED_FACE('',(#8799),#8860,.T.);+#8799=FACE_BOUND('',#8800,.T.);+#8800=EDGE_LOOP('',(#8801,#8805,#8811,#8818,#8823,#8830,#8835,#8840,#8845,#8851,#8856,#6878));+#8801=ORIENTED_EDGE('',*,*,#8802,.F.);+#8802=EDGE_CURVE('',#7720,#6880,#8803,.T.);+#8803=LINE('',#8804,#822);+#8804=CARTESIAN_POINT('',(0.215,-3.5,0.478548768437));+#8805=ORIENTED_EDGE('',*,*,#8806,.T.);+#8806=EDGE_CURVE('',#7720,#8807,#8809,.T.);+#8807=VERTEX_POINT('',#8808);+#8808=CARTESIAN_POINT('',(0.215,-3.7,0.55));+#8809=LINE('',#8810,#7544);+#8810=CARTESIAN_POINT('',(0.215,-3.35,0.55));+#8811=ORIENTED_EDGE('',*,*,#8812,.T.);+#8812=EDGE_CURVE('',#8807,#8813,#8815,.T.);+#8813=VERTEX_POINT('',#8814);+#8814=CARTESIAN_POINT('',(0.215,-3.798480775301,0.467364817767));+#8815=CIRCLE('',#8816,0.1);+#8816=AXIS2_PLACEMENT_3D('',#8817,#7553,#7554);+#8817=CARTESIAN_POINT('',(0.215,-3.7,0.45));+#8818=ORIENTED_EDGE('',*,*,#8819,.T.);+#8819=EDGE_CURVE('',#8813,#8820,#8822,.T.);+#8820=VERTEX_POINT('',#8821);+#8821=CARTESIAN_POINT('',(0.215,-3.847120194575,0.165270364467));+#8822=LINE('',#8814,#7560);+#8823=ORIENTED_EDGE('',*,*,#8824,.T.);+#8824=EDGE_CURVE('',#8820,#8825,#8827,.T.);+#8825=VERTEX_POINT('',#8826);+#8826=CARTESIAN_POINT('',(0.215,-4.044081745177,-2.22044604925E-16));+#8827=CIRCLE('',#8828,0.2);+#8828=AXIS2_PLACEMENT_3D('',#8829,#5290,#7569);+#8829=CARTESIAN_POINT('',(0.215,-4.044081745177,0.2));+#8830=ORIENTED_EDGE('',*,*,#8831,.T.);+#8831=EDGE_CURVE('',#8825,#8832,#8834,.T.);+#8832=VERTEX_POINT('',#8833);+#8833=CARTESIAN_POINT('',(0.215,-4.5,-2.22044604925E-16));+#8834=LINE('',#8826,#7544);+#8835=ORIENTED_EDGE('',*,*,#8836,.T.);+#8836=EDGE_CURVE('',#8832,#8837,#8839,.T.);+#8837=VERTEX_POINT('',#8838);+#8838=CARTESIAN_POINT('',(0.215,-4.5,1.E-01));+#8839=LINE('',#8833,#822);+#8840=ORIENTED_EDGE('',*,*,#8841,.T.);+#8841=EDGE_CURVE('',#8837,#8842,#8844,.T.);+#8842=VERTEX_POINT('',#8843);+#8843=CARTESIAN_POINT('',(0.215,-4.044081745177,1.E-01));+#8844=LINE('',#8838,#2556);+#8845=ORIENTED_EDGE('',*,*,#8846,.T.);+#8846=EDGE_CURVE('',#8842,#8847,#8849,.T.);+#8847=VERTEX_POINT('',#8848);+#8848=CARTESIAN_POINT('',(0.215,-3.945600969876,0.182635182233));+#8849=CIRCLE('',#8850,1.E-01);+#8850=AXIS2_PLACEMENT_3D('',#8829,#7553,#7591);+#8851=ORIENTED_EDGE('',*,*,#8852,.T.);+#8852=EDGE_CURVE('',#8847,#8853,#8855,.T.);+#8853=VERTEX_POINT('',#8854);+#8854=CARTESIAN_POINT('',(0.215,-3.896961550602,0.484729635533));+#8855=LINE('',#8848,#7597);+#8856=ORIENTED_EDGE('',*,*,#8857,.T.);+#8857=EDGE_CURVE('',#8853,#6875,#8858,.T.);+#8858=CIRCLE('',#8859,0.2);+#8859=AXIS2_PLACEMENT_3D('',#8817,#5290,#7603);+#8860=PLANE('',#8861);+#8861=AXIS2_PLACEMENT_3D('',#8862,#5290,#13);+#8862=CARTESIAN_POINT('',(0.215,-3.912728288784,0.307097536874));+#8863=ADVANCED_FACE('',(#8864),#8871,.T.);+#8864=FACE_BOUND('',#8865,.F.);+#8865=EDGE_LOOP('',(#8866,#8856,#8869,#8870));+#8866=ORIENTED_EDGE('',*,*,#8867,.T.);+#8867=EDGE_CURVE('',#8787,#8853,#8868,.T.);+#8868=LINE('',#8788,#5289);+#8869=ORIENTED_EDGE('',*,*,#6874,.F.);+#8870=ORIENTED_EDGE('',*,*,#8791,.F.);+#8871=CYLINDRICAL_SURFACE('',#8872,0.2);+#8872=AXIS2_PLACEMENT_3D('',#8751,#7553,#7603);+#8873=ADVANCED_FACE('',(#8874),#5320,.F.);+#8874=FACE_BOUND('',#8875,.F.);+#8875=EDGE_LOOP('',(#8801,#8876,#8877,#8881));+#8876=ORIENTED_EDGE('',*,*,#7719,.T.);+#8877=ORIENTED_EDGE('',*,*,#8878,.T.);+#8878=EDGE_CURVE('',#7716,#6894,#8879,.T.);+#8879=LINE('',#8880,#822);+#8880=CARTESIAN_POINT('',(-0.215,-3.5,0.478548768437));+#8881=ORIENTED_EDGE('',*,*,#6893,.F.);+#8882=ADVANCED_FACE('',(#8883),#8942,.F.);+#8883=FACE_BOUND('',#8884,.F.);+#8884=EDGE_LOOP('',(#8885,#8886,#8892,#8899,#8904,#8911,#8916,#8921,#8926,#8932,#8937,#8941));+#8885=ORIENTED_EDGE('',*,*,#8878,.F.);+#8886=ORIENTED_EDGE('',*,*,#8887,.T.);+#8887=EDGE_CURVE('',#7716,#8888,#8890,.T.);+#8888=VERTEX_POINT('',#8889);+#8889=CARTESIAN_POINT('',(-0.215,-3.7,0.55));+#8890=LINE('',#8891,#7544);+#8891=CARTESIAN_POINT('',(-0.215,-3.35,0.55));+#8892=ORIENTED_EDGE('',*,*,#8893,.T.);+#8893=EDGE_CURVE('',#8888,#8894,#8896,.T.);+#8894=VERTEX_POINT('',#8895);+#8895=CARTESIAN_POINT('',(-0.215,-3.798480775301,0.467364817767));+#8896=CIRCLE('',#8897,0.1);+#8897=AXIS2_PLACEMENT_3D('',#8898,#7553,#7554);+#8898=CARTESIAN_POINT('',(-0.215,-3.7,0.45));+#8899=ORIENTED_EDGE('',*,*,#8900,.T.);+#8900=EDGE_CURVE('',#8894,#8901,#8903,.T.);+#8901=VERTEX_POINT('',#8902);+#8902=CARTESIAN_POINT('',(-0.215,-3.847120194575,0.165270364467));+#8903=LINE('',#8895,#7560);+#8904=ORIENTED_EDGE('',*,*,#8905,.T.);+#8905=EDGE_CURVE('',#8901,#8906,#8908,.T.);+#8906=VERTEX_POINT('',#8907);+#8907=CARTESIAN_POINT('',(-0.215,-4.044081745177,-2.22044604925E-16));+#8908=CIRCLE('',#8909,0.2);+#8909=AXIS2_PLACEMENT_3D('',#8910,#5290,#7569);+#8910=CARTESIAN_POINT('',(-0.215,-4.044081745177,0.2));+#8911=ORIENTED_EDGE('',*,*,#8912,.T.);+#8912=EDGE_CURVE('',#8906,#8913,#8915,.T.);+#8913=VERTEX_POINT('',#8914);+#8914=CARTESIAN_POINT('',(-0.215,-4.5,-2.22044604925E-16));+#8915=LINE('',#8907,#7544);+#8916=ORIENTED_EDGE('',*,*,#8917,.T.);+#8917=EDGE_CURVE('',#8913,#8918,#8920,.T.);+#8918=VERTEX_POINT('',#8919);+#8919=CARTESIAN_POINT('',(-0.215,-4.5,1.E-01));+#8920=LINE('',#8914,#822);+#8921=ORIENTED_EDGE('',*,*,#8922,.T.);+#8922=EDGE_CURVE('',#8918,#8923,#8925,.T.);+#8923=VERTEX_POINT('',#8924);+#8924=CARTESIAN_POINT('',(-0.215,-4.044081745177,1.E-01));+#8925=LINE('',#8919,#2556);+#8926=ORIENTED_EDGE('',*,*,#8927,.T.);+#8927=EDGE_CURVE('',#8923,#8928,#8930,.T.);+#8928=VERTEX_POINT('',#8929);+#8929=CARTESIAN_POINT('',(-0.215,-3.945600969876,0.182635182233));+#8930=CIRCLE('',#8931,1.E-01);+#8931=AXIS2_PLACEMENT_3D('',#8910,#7553,#7591);+#8932=ORIENTED_EDGE('',*,*,#8933,.T.);+#8933=EDGE_CURVE('',#8928,#8934,#8936,.T.);+#8934=VERTEX_POINT('',#8935);+#8935=CARTESIAN_POINT('',(-0.215,-3.896961550602,0.484729635533));+#8936=LINE('',#8929,#7597);+#8937=ORIENTED_EDGE('',*,*,#8938,.T.);+#8938=EDGE_CURVE('',#8934,#6907,#8939,.T.);+#8939=CIRCLE('',#8940,0.2);+#8940=AXIS2_PLACEMENT_3D('',#8898,#5290,#7603);+#8941=ORIENTED_EDGE('',*,*,#6906,.T.);+#8942=PLANE('',#8943);+#8943=AXIS2_PLACEMENT_3D('',#8944,#5290,#13);+#8944=CARTESIAN_POINT('',(-0.215,-3.912728288784,0.307097536874));+#8945=ADVANCED_FACE('',(#8946),#9007,.T.);+#8946=FACE_BOUND('',#8947,.T.);+#8947=EDGE_LOOP('',(#8948,#8952,#8958,#8965,#8970,#8977,#8982,#8987,#8992,#8998,#9003,#6913));+#8948=ORIENTED_EDGE('',*,*,#8949,.F.);+#8949=EDGE_CURVE('',#7712,#6915,#8950,.T.);+#8950=LINE('',#8951,#822);+#8951=CARTESIAN_POINT('',(-0.585,-3.5,0.478548768437));+#8952=ORIENTED_EDGE('',*,*,#8953,.T.);+#8953=EDGE_CURVE('',#7712,#8954,#8956,.T.);+#8954=VERTEX_POINT('',#8955);+#8955=CARTESIAN_POINT('',(-0.585,-3.7,0.55));+#8956=LINE('',#8957,#7544);+#8957=CARTESIAN_POINT('',(-0.585,-3.35,0.55));+#8958=ORIENTED_EDGE('',*,*,#8959,.T.);+#8959=EDGE_CURVE('',#8954,#8960,#8962,.T.);+#8960=VERTEX_POINT('',#8961);+#8961=CARTESIAN_POINT('',(-0.585,-3.798480775301,0.467364817767));+#8962=CIRCLE('',#8963,0.1);+#8963=AXIS2_PLACEMENT_3D('',#8964,#7553,#7554);+#8964=CARTESIAN_POINT('',(-0.585,-3.7,0.45));+#8965=ORIENTED_EDGE('',*,*,#8966,.T.);+#8966=EDGE_CURVE('',#8960,#8967,#8969,.T.);+#8967=VERTEX_POINT('',#8968);+#8968=CARTESIAN_POINT('',(-0.585,-3.847120194575,0.165270364467));+#8969=LINE('',#8961,#7560);+#8970=ORIENTED_EDGE('',*,*,#8971,.T.);+#8971=EDGE_CURVE('',#8967,#8972,#8974,.T.);+#8972=VERTEX_POINT('',#8973);+#8973=CARTESIAN_POINT('',(-0.585,-4.044081745177,-2.22044604925E-16));+#8974=CIRCLE('',#8975,0.2);+#8975=AXIS2_PLACEMENT_3D('',#8976,#5290,#7569);+#8976=CARTESIAN_POINT('',(-0.585,-4.044081745177,0.2));+#8977=ORIENTED_EDGE('',*,*,#8978,.T.);+#8978=EDGE_CURVE('',#8972,#8979,#8981,.T.);+#8979=VERTEX_POINT('',#8980);+#8980=CARTESIAN_POINT('',(-0.585,-4.5,-2.22044604925E-16));+#8981=LINE('',#8973,#7544);+#8982=ORIENTED_EDGE('',*,*,#8983,.T.);+#8983=EDGE_CURVE('',#8979,#8984,#8986,.T.);+#8984=VERTEX_POINT('',#8985);+#8985=CARTESIAN_POINT('',(-0.585,-4.5,1.E-01));+#8986=LINE('',#8980,#822);+#8987=ORIENTED_EDGE('',*,*,#8988,.T.);+#8988=EDGE_CURVE('',#8984,#8989,#8991,.T.);+#8989=VERTEX_POINT('',#8990);+#8990=CARTESIAN_POINT('',(-0.585,-4.044081745177,1.E-01));+#8991=LINE('',#8985,#2556);+#8992=ORIENTED_EDGE('',*,*,#8993,.T.);+#8993=EDGE_CURVE('',#8989,#8994,#8996,.T.);+#8994=VERTEX_POINT('',#8995);+#8995=CARTESIAN_POINT('',(-0.585,-3.945600969876,0.182635182233));+#8996=CIRCLE('',#8997,1.E-01);+#8997=AXIS2_PLACEMENT_3D('',#8976,#7553,#7591);+#8998=ORIENTED_EDGE('',*,*,#8999,.T.);+#8999=EDGE_CURVE('',#8994,#9000,#9002,.T.);+#9000=VERTEX_POINT('',#9001);+#9001=CARTESIAN_POINT('',(-0.585,-3.896961550602,0.484729635533));+#9002=LINE('',#8995,#7597);+#9003=ORIENTED_EDGE('',*,*,#9004,.T.);+#9004=EDGE_CURVE('',#9000,#6910,#9005,.T.);+#9005=CIRCLE('',#9006,0.2);+#9006=AXIS2_PLACEMENT_3D('',#8964,#5290,#7603);+#9007=PLANE('',#9008);+#9008=AXIS2_PLACEMENT_3D('',#9009,#5290,#13);+#9009=CARTESIAN_POINT('',(-0.585,-3.912728288784,0.307097536874));+#9010=ADVANCED_FACE('',(#9011),#9018,.T.);+#9011=FACE_BOUND('',#9012,.F.);+#9012=EDGE_LOOP('',(#9013,#9003,#9016,#9017));+#9013=ORIENTED_EDGE('',*,*,#9014,.T.);+#9014=EDGE_CURVE('',#8934,#9000,#9015,.T.);+#9015=LINE('',#8935,#5289);+#9016=ORIENTED_EDGE('',*,*,#6909,.F.);+#9017=ORIENTED_EDGE('',*,*,#8938,.F.);+#9018=CYLINDRICAL_SURFACE('',#9019,0.2);+#9019=AXIS2_PLACEMENT_3D('',#8898,#7553,#7603);+#9020=ADVANCED_FACE('',(#9021),#5320,.F.);+#9021=FACE_BOUND('',#9022,.F.);+#9022=EDGE_LOOP('',(#8948,#9023,#9024,#9028));+#9023=ORIENTED_EDGE('',*,*,#7711,.T.);+#9024=ORIENTED_EDGE('',*,*,#9025,.T.);+#9025=EDGE_CURVE('',#7708,#6929,#9026,.T.);+#9026=LINE('',#9027,#822);+#9027=CARTESIAN_POINT('',(-1.015,-3.5,0.478548768437));+#9028=ORIENTED_EDGE('',*,*,#6928,.F.);+#9029=ADVANCED_FACE('',(#9030),#9089,.F.);+#9030=FACE_BOUND('',#9031,.F.);+#9031=EDGE_LOOP('',(#9032,#9033,#9039,#9046,#9051,#9058,#9063,#9068,#9073,#9079,#9084,#9088));+#9032=ORIENTED_EDGE('',*,*,#9025,.F.);+#9033=ORIENTED_EDGE('',*,*,#9034,.T.);+#9034=EDGE_CURVE('',#7708,#9035,#9037,.T.);+#9035=VERTEX_POINT('',#9036);+#9036=CARTESIAN_POINT('',(-1.015,-3.7,0.55));+#9037=LINE('',#9038,#7544);+#9038=CARTESIAN_POINT('',(-1.015,-3.35,0.55));+#9039=ORIENTED_EDGE('',*,*,#9040,.T.);+#9040=EDGE_CURVE('',#9035,#9041,#9043,.T.);+#9041=VERTEX_POINT('',#9042);+#9042=CARTESIAN_POINT('',(-1.015,-3.798480775301,0.467364817767));+#9043=CIRCLE('',#9044,0.1);+#9044=AXIS2_PLACEMENT_3D('',#9045,#7553,#7554);+#9045=CARTESIAN_POINT('',(-1.015,-3.7,0.45));+#9046=ORIENTED_EDGE('',*,*,#9047,.T.);+#9047=EDGE_CURVE('',#9041,#9048,#9050,.T.);+#9048=VERTEX_POINT('',#9049);+#9049=CARTESIAN_POINT('',(-1.015,-3.847120194575,0.165270364467));+#9050=LINE('',#9042,#7560);+#9051=ORIENTED_EDGE('',*,*,#9052,.T.);+#9052=EDGE_CURVE('',#9048,#9053,#9055,.T.);+#9053=VERTEX_POINT('',#9054);+#9054=CARTESIAN_POINT('',(-1.015,-4.044081745177,-2.22044604925E-16));+#9055=CIRCLE('',#9056,0.2);+#9056=AXIS2_PLACEMENT_3D('',#9057,#5290,#7569);+#9057=CARTESIAN_POINT('',(-1.015,-4.044081745177,0.2));+#9058=ORIENTED_EDGE('',*,*,#9059,.T.);+#9059=EDGE_CURVE('',#9053,#9060,#9062,.T.);+#9060=VERTEX_POINT('',#9061);+#9061=CARTESIAN_POINT('',(-1.015,-4.5,-2.22044604925E-16));+#9062=LINE('',#9054,#7544);+#9063=ORIENTED_EDGE('',*,*,#9064,.T.);+#9064=EDGE_CURVE('',#9060,#9065,#9067,.T.);+#9065=VERTEX_POINT('',#9066);+#9066=CARTESIAN_POINT('',(-1.015,-4.5,1.E-01));+#9067=LINE('',#9061,#822);+#9068=ORIENTED_EDGE('',*,*,#9069,.T.);+#9069=EDGE_CURVE('',#9065,#9070,#9072,.T.);+#9070=VERTEX_POINT('',#9071);+#9071=CARTESIAN_POINT('',(-1.015,-4.044081745177,1.E-01));+#9072=LINE('',#9066,#2556);+#9073=ORIENTED_EDGE('',*,*,#9074,.T.);+#9074=EDGE_CURVE('',#9070,#9075,#9077,.T.);+#9075=VERTEX_POINT('',#9076);+#9076=CARTESIAN_POINT('',(-1.015,-3.945600969876,0.182635182233));+#9077=CIRCLE('',#9078,1.E-01);+#9078=AXIS2_PLACEMENT_3D('',#9057,#7553,#7591);+#9079=ORIENTED_EDGE('',*,*,#9080,.T.);+#9080=EDGE_CURVE('',#9075,#9081,#9083,.T.);+#9081=VERTEX_POINT('',#9082);+#9082=CARTESIAN_POINT('',(-1.015,-3.896961550602,0.484729635533));+#9083=LINE('',#9076,#7597);+#9084=ORIENTED_EDGE('',*,*,#9085,.T.);+#9085=EDGE_CURVE('',#9081,#6942,#9086,.T.);+#9086=CIRCLE('',#9087,0.2);+#9087=AXIS2_PLACEMENT_3D('',#9045,#5290,#7603);+#9088=ORIENTED_EDGE('',*,*,#6941,.T.);+#9089=PLANE('',#9090);+#9090=AXIS2_PLACEMENT_3D('',#9091,#5290,#13);+#9091=CARTESIAN_POINT('',(-1.015,-3.912728288784,0.307097536874));+#9092=ADVANCED_FACE('',(#9093),#9154,.T.);+#9093=FACE_BOUND('',#9094,.T.);+#9094=EDGE_LOOP('',(#9095,#9099,#9105,#9112,#9117,#9124,#9129,#9134,#9139,#9145,#9150,#6948));+#9095=ORIENTED_EDGE('',*,*,#9096,.F.);+#9096=EDGE_CURVE('',#7704,#6950,#9097,.T.);+#9097=LINE('',#9098,#822);+#9098=CARTESIAN_POINT('',(-1.385,-3.5,0.478548768437));+#9099=ORIENTED_EDGE('',*,*,#9100,.T.);+#9100=EDGE_CURVE('',#7704,#9101,#9103,.T.);+#9101=VERTEX_POINT('',#9102);+#9102=CARTESIAN_POINT('',(-1.385,-3.7,0.55));+#9103=LINE('',#9104,#7544);+#9104=CARTESIAN_POINT('',(-1.385,-3.35,0.55));+#9105=ORIENTED_EDGE('',*,*,#9106,.T.);+#9106=EDGE_CURVE('',#9101,#9107,#9109,.T.);+#9107=VERTEX_POINT('',#9108);+#9108=CARTESIAN_POINT('',(-1.385,-3.798480775301,0.467364817767));+#9109=CIRCLE('',#9110,0.1);+#9110=AXIS2_PLACEMENT_3D('',#9111,#7553,#7554);+#9111=CARTESIAN_POINT('',(-1.385,-3.7,0.45));+#9112=ORIENTED_EDGE('',*,*,#9113,.T.);+#9113=EDGE_CURVE('',#9107,#9114,#9116,.T.);+#9114=VERTEX_POINT('',#9115);+#9115=CARTESIAN_POINT('',(-1.385,-3.847120194575,0.165270364467));+#9116=LINE('',#9108,#7560);+#9117=ORIENTED_EDGE('',*,*,#9118,.T.);+#9118=EDGE_CURVE('',#9114,#9119,#9121,.T.);+#9119=VERTEX_POINT('',#9120);+#9120=CARTESIAN_POINT('',(-1.385,-4.044081745177,-2.22044604925E-16));+#9121=CIRCLE('',#9122,0.2);+#9122=AXIS2_PLACEMENT_3D('',#9123,#5290,#7569);+#9123=CARTESIAN_POINT('',(-1.385,-4.044081745177,0.2));+#9124=ORIENTED_EDGE('',*,*,#9125,.T.);+#9125=EDGE_CURVE('',#9119,#9126,#9128,.T.);+#9126=VERTEX_POINT('',#9127);+#9127=CARTESIAN_POINT('',(-1.385,-4.5,-2.22044604925E-16));+#9128=LINE('',#9120,#7544);+#9129=ORIENTED_EDGE('',*,*,#9130,.T.);+#9130=EDGE_CURVE('',#9126,#9131,#9133,.T.);+#9131=VERTEX_POINT('',#9132);+#9132=CARTESIAN_POINT('',(-1.385,-4.5,1.E-01));+#9133=LINE('',#9127,#822);+#9134=ORIENTED_EDGE('',*,*,#9135,.T.);+#9135=EDGE_CURVE('',#9131,#9136,#9138,.T.);+#9136=VERTEX_POINT('',#9137);+#9137=CARTESIAN_POINT('',(-1.385,-4.044081745177,1.E-01));+#9138=LINE('',#9132,#2556);+#9139=ORIENTED_EDGE('',*,*,#9140,.T.);+#9140=EDGE_CURVE('',#9136,#9141,#9143,.T.);+#9141=VERTEX_POINT('',#9142);+#9142=CARTESIAN_POINT('',(-1.385,-3.945600969876,0.182635182233));+#9143=CIRCLE('',#9144,1.E-01);+#9144=AXIS2_PLACEMENT_3D('',#9123,#7553,#7591);+#9145=ORIENTED_EDGE('',*,*,#9146,.T.);+#9146=EDGE_CURVE('',#9141,#9147,#9149,.T.);+#9147=VERTEX_POINT('',#9148);+#9148=CARTESIAN_POINT('',(-1.385,-3.896961550602,0.484729635533));+#9149=LINE('',#9142,#7597);+#9150=ORIENTED_EDGE('',*,*,#9151,.T.);+#9151=EDGE_CURVE('',#9147,#6945,#9152,.T.);+#9152=CIRCLE('',#9153,0.2);+#9153=AXIS2_PLACEMENT_3D('',#9111,#5290,#7603);+#9154=PLANE('',#9155);+#9155=AXIS2_PLACEMENT_3D('',#9156,#5290,#13);+#9156=CARTESIAN_POINT('',(-1.385,-3.912728288784,0.307097536874));+#9157=ADVANCED_FACE('',(#9158),#9165,.T.);+#9158=FACE_BOUND('',#9159,.F.);+#9159=EDGE_LOOP('',(#9160,#9150,#9163,#9164));+#9160=ORIENTED_EDGE('',*,*,#9161,.T.);+#9161=EDGE_CURVE('',#9081,#9147,#9162,.T.);+#9162=LINE('',#9082,#5289);+#9163=ORIENTED_EDGE('',*,*,#6944,.F.);+#9164=ORIENTED_EDGE('',*,*,#9085,.F.);+#9165=CYLINDRICAL_SURFACE('',#9166,0.2);+#9166=AXIS2_PLACEMENT_3D('',#9045,#7553,#7603);+#9167=ADVANCED_FACE('',(#9168),#5320,.F.);+#9168=FACE_BOUND('',#9169,.F.);+#9169=EDGE_LOOP('',(#9095,#9170,#9171,#9175));+#9170=ORIENTED_EDGE('',*,*,#7703,.T.);+#9171=ORIENTED_EDGE('',*,*,#9172,.T.);+#9172=EDGE_CURVE('',#7700,#6964,#9173,.T.);+#9173=LINE('',#9174,#822);+#9174=CARTESIAN_POINT('',(-1.815,-3.5,0.478548768437));+#9175=ORIENTED_EDGE('',*,*,#6963,.F.);+#9176=ADVANCED_FACE('',(#9177),#9236,.F.);+#9177=FACE_BOUND('',#9178,.F.);+#9178=EDGE_LOOP('',(#9179,#9180,#9186,#9193,#9198,#9205,#9210,#9215,#9220,#9226,#9231,#9235));+#9179=ORIENTED_EDGE('',*,*,#9172,.F.);+#9180=ORIENTED_EDGE('',*,*,#9181,.T.);+#9181=EDGE_CURVE('',#7700,#9182,#9184,.T.);+#9182=VERTEX_POINT('',#9183);+#9183=CARTESIAN_POINT('',(-1.815,-3.7,0.55));+#9184=LINE('',#9185,#7544);+#9185=CARTESIAN_POINT('',(-1.815,-3.35,0.55));+#9186=ORIENTED_EDGE('',*,*,#9187,.T.);+#9187=EDGE_CURVE('',#9182,#9188,#9190,.T.);+#9188=VERTEX_POINT('',#9189);+#9189=CARTESIAN_POINT('',(-1.815,-3.798480775301,0.467364817767));+#9190=CIRCLE('',#9191,0.1);+#9191=AXIS2_PLACEMENT_3D('',#9192,#7553,#7554);+#9192=CARTESIAN_POINT('',(-1.815,-3.7,0.45));+#9193=ORIENTED_EDGE('',*,*,#9194,.T.);+#9194=EDGE_CURVE('',#9188,#9195,#9197,.T.);+#9195=VERTEX_POINT('',#9196);+#9196=CARTESIAN_POINT('',(-1.815,-3.847120194575,0.165270364467));+#9197=LINE('',#9189,#7560);+#9198=ORIENTED_EDGE('',*,*,#9199,.T.);+#9199=EDGE_CURVE('',#9195,#9200,#9202,.T.);+#9200=VERTEX_POINT('',#9201);+#9201=CARTESIAN_POINT('',(-1.815,-4.044081745177,-2.22044604925E-16));+#9202=CIRCLE('',#9203,0.2);+#9203=AXIS2_PLACEMENT_3D('',#9204,#5290,#7569);+#9204=CARTESIAN_POINT('',(-1.815,-4.044081745177,0.2));+#9205=ORIENTED_EDGE('',*,*,#9206,.T.);+#9206=EDGE_CURVE('',#9200,#9207,#9209,.T.);+#9207=VERTEX_POINT('',#9208);+#9208=CARTESIAN_POINT('',(-1.815,-4.5,-2.22044604925E-16));+#9209=LINE('',#9201,#7544);+#9210=ORIENTED_EDGE('',*,*,#9211,.T.);+#9211=EDGE_CURVE('',#9207,#9212,#9214,.T.);+#9212=VERTEX_POINT('',#9213);+#9213=CARTESIAN_POINT('',(-1.815,-4.5,1.E-01));+#9214=LINE('',#9208,#822);+#9215=ORIENTED_EDGE('',*,*,#9216,.T.);+#9216=EDGE_CURVE('',#9212,#9217,#9219,.T.);+#9217=VERTEX_POINT('',#9218);+#9218=CARTESIAN_POINT('',(-1.815,-4.044081745177,1.E-01));+#9219=LINE('',#9213,#2556);+#9220=ORIENTED_EDGE('',*,*,#9221,.T.);+#9221=EDGE_CURVE('',#9217,#9222,#9224,.T.);+#9222=VERTEX_POINT('',#9223);+#9223=CARTESIAN_POINT('',(-1.815,-3.945600969876,0.182635182233));+#9224=CIRCLE('',#9225,1.E-01);+#9225=AXIS2_PLACEMENT_3D('',#9204,#7553,#7591);+#9226=ORIENTED_EDGE('',*,*,#9227,.T.);+#9227=EDGE_CURVE('',#9222,#9228,#9230,.T.);+#9228=VERTEX_POINT('',#9229);+#9229=CARTESIAN_POINT('',(-1.815,-3.896961550602,0.484729635533));+#9230=LINE('',#9223,#7597);+#9231=ORIENTED_EDGE('',*,*,#9232,.T.);+#9232=EDGE_CURVE('',#9228,#6977,#9233,.T.);+#9233=CIRCLE('',#9234,0.2);+#9234=AXIS2_PLACEMENT_3D('',#9192,#5290,#7603);+#9235=ORIENTED_EDGE('',*,*,#6976,.T.);+#9236=PLANE('',#9237);+#9237=AXIS2_PLACEMENT_3D('',#9238,#5290,#13);+#9238=CARTESIAN_POINT('',(-1.815,-3.912728288784,0.307097536874));+#9239=ADVANCED_FACE('',(#9240),#9301,.T.);+#9240=FACE_BOUND('',#9241,.T.);+#9241=EDGE_LOOP('',(#9242,#9246,#9252,#9259,#9264,#9271,#9276,#9281,#9286,#9292,#9297,#6983));+#9242=ORIENTED_EDGE('',*,*,#9243,.F.);+#9243=EDGE_CURVE('',#7696,#6985,#9244,.T.);+#9244=LINE('',#9245,#822);+#9245=CARTESIAN_POINT('',(-2.185,-3.5,0.478548768437));+#9246=ORIENTED_EDGE('',*,*,#9247,.T.);+#9247=EDGE_CURVE('',#7696,#9248,#9250,.T.);+#9248=VERTEX_POINT('',#9249);+#9249=CARTESIAN_POINT('',(-2.185,-3.7,0.55));+#9250=LINE('',#9251,#7544);+#9251=CARTESIAN_POINT('',(-2.185,-3.35,0.55));+#9252=ORIENTED_EDGE('',*,*,#9253,.T.);+#9253=EDGE_CURVE('',#9248,#9254,#9256,.T.);+#9254=VERTEX_POINT('',#9255);+#9255=CARTESIAN_POINT('',(-2.185,-3.798480775301,0.467364817767));+#9256=CIRCLE('',#9257,0.1);+#9257=AXIS2_PLACEMENT_3D('',#9258,#7553,#7554);+#9258=CARTESIAN_POINT('',(-2.185,-3.7,0.45));+#9259=ORIENTED_EDGE('',*,*,#9260,.T.);+#9260=EDGE_CURVE('',#9254,#9261,#9263,.T.);+#9261=VERTEX_POINT('',#9262);+#9262=CARTESIAN_POINT('',(-2.185,-3.847120194575,0.165270364467));+#9263=LINE('',#9255,#7560);+#9264=ORIENTED_EDGE('',*,*,#9265,.T.);+#9265=EDGE_CURVE('',#9261,#9266,#9268,.T.);+#9266=VERTEX_POINT('',#9267);+#9267=CARTESIAN_POINT('',(-2.185,-4.044081745177,-2.22044604925E-16));+#9268=CIRCLE('',#9269,0.2);+#9269=AXIS2_PLACEMENT_3D('',#9270,#5290,#7569);+#9270=CARTESIAN_POINT('',(-2.185,-4.044081745177,0.2));+#9271=ORIENTED_EDGE('',*,*,#9272,.T.);+#9272=EDGE_CURVE('',#9266,#9273,#9275,.T.);+#9273=VERTEX_POINT('',#9274);+#9274=CARTESIAN_POINT('',(-2.185,-4.5,-2.22044604925E-16));+#9275=LINE('',#9267,#7544);+#9276=ORIENTED_EDGE('',*,*,#9277,.T.);+#9277=EDGE_CURVE('',#9273,#9278,#9280,.T.);+#9278=VERTEX_POINT('',#9279);+#9279=CARTESIAN_POINT('',(-2.185,-4.5,1.E-01));+#9280=LINE('',#9274,#822);+#9281=ORIENTED_EDGE('',*,*,#9282,.T.);+#9282=EDGE_CURVE('',#9278,#9283,#9285,.T.);+#9283=VERTEX_POINT('',#9284);+#9284=CARTESIAN_POINT('',(-2.185,-4.044081745177,1.E-01));+#9285=LINE('',#9279,#2556);+#9286=ORIENTED_EDGE('',*,*,#9287,.T.);+#9287=EDGE_CURVE('',#9283,#9288,#9290,.T.);+#9288=VERTEX_POINT('',#9289);+#9289=CARTESIAN_POINT('',(-2.185,-3.945600969876,0.182635182233));+#9290=CIRCLE('',#9291,1.E-01);+#9291=AXIS2_PLACEMENT_3D('',#9270,#7553,#7591);+#9292=ORIENTED_EDGE('',*,*,#9293,.T.);+#9293=EDGE_CURVE('',#9288,#9294,#9296,.T.);+#9294=VERTEX_POINT('',#9295);+#9295=CARTESIAN_POINT('',(-2.185,-3.896961550602,0.484729635533));+#9296=LINE('',#9289,#7597);+#9297=ORIENTED_EDGE('',*,*,#9298,.T.);+#9298=EDGE_CURVE('',#9294,#6980,#9299,.T.);+#9299=CIRCLE('',#9300,0.2);+#9300=AXIS2_PLACEMENT_3D('',#9258,#5290,#7603);+#9301=PLANE('',#9302);+#9302=AXIS2_PLACEMENT_3D('',#9303,#5290,#13);+#9303=CARTESIAN_POINT('',(-2.185,-3.912728288784,0.307097536874));+#9304=ADVANCED_FACE('',(#9305),#9312,.T.);+#9305=FACE_BOUND('',#9306,.F.);+#9306=EDGE_LOOP('',(#9307,#9297,#9310,#9311));+#9307=ORIENTED_EDGE('',*,*,#9308,.T.);+#9308=EDGE_CURVE('',#9228,#9294,#9309,.T.);+#9309=LINE('',#9229,#5289);+#9310=ORIENTED_EDGE('',*,*,#6979,.F.);+#9311=ORIENTED_EDGE('',*,*,#9232,.F.);+#9312=CYLINDRICAL_SURFACE('',#9313,0.2);+#9313=AXIS2_PLACEMENT_3D('',#9192,#7553,#7603);+#9314=ADVANCED_FACE('',(#9315),#5320,.F.);+#9315=FACE_BOUND('',#9316,.F.);+#9316=EDGE_LOOP('',(#9242,#9317,#9318,#9319));+#9317=ORIENTED_EDGE('',*,*,#7695,.T.);+#9318=ORIENTED_EDGE('',*,*,#7884,.T.);+#9319=ORIENTED_EDGE('',*,*,#6998,.F.);+#9320=ADVANCED_FACE('',(#9321),#9328,.F.);+#9321=FACE_BOUND('',#9322,.F.);+#9322=EDGE_LOOP('',(#9323,#7663,#9326,#9327));+#9323=ORIENTED_EDGE('',*,*,#9324,.T.);+#9324=EDGE_CURVE('',#7587,#7659,#9325,.T.);+#9325=LINE('',#7588,#5289);+#9326=ORIENTED_EDGE('',*,*,#7679,.F.);+#9327=ORIENTED_EDGE('',*,*,#7593,.F.);+#9328=PLANE('',#9329);+#9329=AXIS2_PLACEMENT_3D('',#7588,#9330,#7598);+#9330=DIRECTION('',(1.096106544673E-16,0.987285005229,-0.158960115908));+#9331=ADVANCED_FACE('',(#9332),#9339,.F.);+#9332=FACE_BOUND('',#9333,.F.);+#9333=EDGE_LOOP('',(#9334,#7657,#9337,#9338));+#9334=ORIENTED_EDGE('',*,*,#9335,.T.);+#9335=EDGE_CURVE('',#7582,#7654,#9336,.T.);+#9336=LINE('',#7583,#5289);+#9337=ORIENTED_EDGE('',*,*,#9324,.F.);+#9338=ORIENTED_EDGE('',*,*,#7586,.F.);+#9339=CYLINDRICAL_SURFACE('',#7590,1.E-01);+#9340=ADVANCED_FACE('',(#9341),#9348,.F.);+#9341=FACE_BOUND('',#9342,.F.);+#9342=EDGE_LOOP('',(#9343,#7652,#9346,#9347));+#9343=ORIENTED_EDGE('',*,*,#9344,.T.);+#9344=EDGE_CURVE('',#7577,#7649,#9345,.T.);+#9345=LINE('',#7578,#5289);+#9346=ORIENTED_EDGE('',*,*,#9335,.F.);+#9347=ORIENTED_EDGE('',*,*,#7581,.F.);+#9348=PLANE('',#9349);+#9349=AXIS2_PLACEMENT_3D('',#7578,#273,#2557);+#9350=ADVANCED_FACE('',(#9351),#9358,.F.);+#9351=FACE_BOUND('',#9352,.F.);+#9352=EDGE_LOOP('',(#9353,#7647,#9356,#9357));+#9353=ORIENTED_EDGE('',*,*,#9354,.T.);+#9354=EDGE_CURVE('',#7572,#7644,#9355,.T.);+#9355=LINE('',#7573,#5289);+#9356=ORIENTED_EDGE('',*,*,#9344,.F.);+#9357=ORIENTED_EDGE('',*,*,#7576,.F.);+#9358=PLANE('',#9359);+#9359=AXIS2_PLACEMENT_3D('',#7573,#2557,#13);+#9360=ADVANCED_FACE('',(#9361),#9368,.F.);+#9361=FACE_BOUND('',#9362,.F.);+#9362=EDGE_LOOP('',(#9363,#7642,#9366,#9367));+#9363=ORIENTED_EDGE('',*,*,#9364,.T.);+#9364=EDGE_CURVE('',#7564,#7637,#9365,.T.);+#9365=LINE('',#7565,#5289);+#9366=ORIENTED_EDGE('',*,*,#9354,.F.);+#9367=ORIENTED_EDGE('',*,*,#7571,.F.);+#9368=PLANE('',#9369);+#9369=AXIS2_PLACEMENT_3D('',#7565,#13,#7545);+#9370=ADVANCED_FACE('',(#9371),#9378,.T.);+#9371=FACE_BOUND('',#9372,.F.);+#9372=EDGE_LOOP('',(#9373,#7635,#9376,#9377));+#9373=ORIENTED_EDGE('',*,*,#9374,.T.);+#9374=EDGE_CURVE('',#7557,#7632,#9375,.T.);+#9375=LINE('',#7558,#5289);+#9376=ORIENTED_EDGE('',*,*,#9364,.F.);+#9377=ORIENTED_EDGE('',*,*,#7563,.F.);+#9378=CYLINDRICAL_SURFACE('',#9379,0.2);+#9379=AXIS2_PLACEMENT_3D('',#7568,#7553,#7569);+#9380=ADVANCED_FACE('',(#9381),#9388,.F.);+#9381=FACE_BOUND('',#9382,.F.);+#9382=EDGE_LOOP('',(#9383,#7630,#9386,#9387));+#9383=ORIENTED_EDGE('',*,*,#9384,.T.);+#9384=EDGE_CURVE('',#7548,#7625,#9385,.T.);+#9385=LINE('',#7549,#5289);+#9386=ORIENTED_EDGE('',*,*,#9374,.F.);+#9387=ORIENTED_EDGE('',*,*,#7556,.F.);+#9388=PLANE('',#9389);+#9389=AXIS2_PLACEMENT_3D('',#7549,#9390,#7561);+#9390=DIRECTION('',(-1.096106544673E-16,-0.987285005229,0.158960115908));+#9391=ADVANCED_FACE('',(#9392),#9399,.F.);+#9392=FACE_BOUND('',#9393,.F.);+#9393=EDGE_LOOP('',(#9394,#7623,#9397,#9398));+#9394=ORIENTED_EDGE('',*,*,#9395,.T.);+#9395=EDGE_CURVE('',#7540,#7619,#9396,.T.);+#9396=LINE('',#7541,#5289);+#9397=ORIENTED_EDGE('',*,*,#9384,.F.);+#9398=ORIENTED_EDGE('',*,*,#7547,.F.);+#9399=CYLINDRICAL_SURFACE('',#7551,0.1);+#9400=ADVANCED_FACE('',(#9401),#9406,.F.);+#9401=FACE_BOUND('',#9402,.F.);+#9402=EDGE_LOOP('',(#9403,#9404,#7617,#9405));+#9403=ORIENTED_EDGE('',*,*,#7539,.F.);+#9404=ORIENTED_EDGE('',*,*,#7745,.T.);+#9405=ORIENTED_EDGE('',*,*,#9395,.F.);+#9406=PLANE('',#9407);+#9407=AXIS2_PLACEMENT_3D('',#7543,#13,#7545);+#9408=ADVANCED_FACE('',(#9409),#9416,.F.);+#9409=FACE_BOUND('',#9410,.F.);+#9410=EDGE_LOOP('',(#9411,#9412,#8511,#9413));+#9411=ORIENTED_EDGE('',*,*,#8446,.F.);+#9412=ORIENTED_EDGE('',*,*,#7739,.T.);+#9413=ORIENTED_EDGE('',*,*,#9414,.F.);+#9414=EDGE_CURVE('',#8447,#8513,#9415,.T.);+#9415=LINE('',#8448,#5289);+#9416=PLANE('',#9417);+#9417=AXIS2_PLACEMENT_3D('',#8450,#13,#7545);+#9418=ADVANCED_FACE('',(#9419),#9426,.F.);+#9419=FACE_BOUND('',#9420,.F.);+#9420=EDGE_LOOP('',(#9421,#9422,#8658,#9423));+#9421=ORIENTED_EDGE('',*,*,#8593,.F.);+#9422=ORIENTED_EDGE('',*,*,#7731,.T.);+#9423=ORIENTED_EDGE('',*,*,#9424,.F.);+#9424=EDGE_CURVE('',#8594,#8660,#9425,.T.);+#9425=LINE('',#8595,#5289);+#9426=PLANE('',#9427);+#9427=AXIS2_PLACEMENT_3D('',#8597,#13,#7545);+#9428=ADVANCED_FACE('',(#9429),#9436,.F.);+#9429=FACE_BOUND('',#9430,.F.);+#9430=EDGE_LOOP('',(#9431,#9432,#8805,#9433));+#9431=ORIENTED_EDGE('',*,*,#8740,.F.);+#9432=ORIENTED_EDGE('',*,*,#7723,.T.);+#9433=ORIENTED_EDGE('',*,*,#9434,.F.);+#9434=EDGE_CURVE('',#8741,#8807,#9435,.T.);+#9435=LINE('',#8742,#5289);+#9436=PLANE('',#9437);+#9437=AXIS2_PLACEMENT_3D('',#8744,#13,#7545);+#9438=ADVANCED_FACE('',(#9439),#9446,.F.);+#9439=FACE_BOUND('',#9440,.F.);+#9440=EDGE_LOOP('',(#9441,#9442,#8952,#9443));+#9441=ORIENTED_EDGE('',*,*,#8887,.F.);+#9442=ORIENTED_EDGE('',*,*,#7715,.T.);+#9443=ORIENTED_EDGE('',*,*,#9444,.F.);+#9444=EDGE_CURVE('',#8888,#8954,#9445,.T.);+#9445=LINE('',#8889,#5289);+#9446=PLANE('',#9447);+#9447=AXIS2_PLACEMENT_3D('',#8891,#13,#7545);+#9448=ADVANCED_FACE('',(#9449),#9456,.F.);+#9449=FACE_BOUND('',#9450,.F.);+#9450=EDGE_LOOP('',(#9451,#9452,#9099,#9453));+#9451=ORIENTED_EDGE('',*,*,#9034,.F.);+#9452=ORIENTED_EDGE('',*,*,#7707,.T.);+#9453=ORIENTED_EDGE('',*,*,#9454,.F.);+#9454=EDGE_CURVE('',#9035,#9101,#9455,.T.);+#9455=LINE('',#9036,#5289);+#9456=PLANE('',#9457);+#9457=AXIS2_PLACEMENT_3D('',#9038,#13,#7545);+#9458=ADVANCED_FACE('',(#9459),#9466,.F.);+#9459=FACE_BOUND('',#9460,.F.);+#9460=EDGE_LOOP('',(#9461,#9462,#9246,#9463));+#9461=ORIENTED_EDGE('',*,*,#9181,.F.);+#9462=ORIENTED_EDGE('',*,*,#7699,.T.);+#9463=ORIENTED_EDGE('',*,*,#9464,.F.);+#9464=EDGE_CURVE('',#9182,#9248,#9465,.T.);+#9465=LINE('',#9183,#5289);+#9466=PLANE('',#9467);+#9467=AXIS2_PLACEMENT_3D('',#9185,#13,#7545);+#9468=ADVANCED_FACE('',(#9469),#9476,.F.);+#9469=FACE_BOUND('',#9470,.F.);+#9470=EDGE_LOOP('',(#9471,#9472,#7822,#9473));+#9471=ORIENTED_EDGE('',*,*,#7888,.F.);+#9472=ORIENTED_EDGE('',*,*,#7691,.T.);+#9473=ORIENTED_EDGE('',*,*,#9474,.F.);+#9474=EDGE_CURVE('',#7889,#7824,#9475,.T.);+#9475=LINE('',#7890,#5289);+#9476=PLANE('',#9477);+#9477=AXIS2_PLACEMENT_3D('',#7892,#13,#7545);+#9478=ADVANCED_FACE('',(#9479),#9486,.F.);+#9479=FACE_BOUND('',#9480,.F.);+#9480=EDGE_LOOP('',(#9481,#7868,#9484,#9485));+#9481=ORIENTED_EDGE('',*,*,#9482,.T.);+#9482=EDGE_CURVE('',#7929,#7864,#9483,.T.);+#9483=LINE('',#7930,#5289);+#9484=ORIENTED_EDGE('',*,*,#7950,.F.);+#9485=ORIENTED_EDGE('',*,*,#7934,.F.);+#9486=PLANE('',#9487);+#9487=AXIS2_PLACEMENT_3D('',#7930,#9330,#7598);+#9488=ADVANCED_FACE('',(#9489),#9496,.F.);+#9489=FACE_BOUND('',#9490,.F.);+#9490=EDGE_LOOP('',(#9491,#7862,#9494,#9495));+#9491=ORIENTED_EDGE('',*,*,#9492,.T.);+#9492=EDGE_CURVE('',#7924,#7859,#9493,.T.);+#9493=LINE('',#7925,#5289);+#9494=ORIENTED_EDGE('',*,*,#9482,.F.);+#9495=ORIENTED_EDGE('',*,*,#7928,.F.);+#9496=CYLINDRICAL_SURFACE('',#7932,1.E-01);+#9497=ADVANCED_FACE('',(#9498),#9505,.F.);+#9498=FACE_BOUND('',#9499,.F.);+#9499=EDGE_LOOP('',(#9500,#7857,#9503,#9504));+#9500=ORIENTED_EDGE('',*,*,#9501,.T.);+#9501=EDGE_CURVE('',#7919,#7854,#9502,.T.);+#9502=LINE('',#7920,#5289);+#9503=ORIENTED_EDGE('',*,*,#9492,.F.);+#9504=ORIENTED_EDGE('',*,*,#7923,.F.);+#9505=PLANE('',#9506);+#9506=AXIS2_PLACEMENT_3D('',#7920,#273,#2557);+#9507=ADVANCED_FACE('',(#9508),#9515,.F.);+#9508=FACE_BOUND('',#9509,.F.);+#9509=EDGE_LOOP('',(#9510,#7852,#9513,#9514));+#9510=ORIENTED_EDGE('',*,*,#9511,.T.);+#9511=EDGE_CURVE('',#7914,#7849,#9512,.T.);+#9512=LINE('',#7915,#5289);+#9513=ORIENTED_EDGE('',*,*,#9501,.F.);+#9514=ORIENTED_EDGE('',*,*,#7918,.F.);+#9515=PLANE('',#9516);+#9516=AXIS2_PLACEMENT_3D('',#7915,#2557,#13);+#9517=ADVANCED_FACE('',(#9518),#9525,.F.);+#9518=FACE_BOUND('',#9519,.F.);+#9519=EDGE_LOOP('',(#9520,#7847,#9523,#9524));+#9520=ORIENTED_EDGE('',*,*,#9521,.T.);+#9521=EDGE_CURVE('',#7907,#7842,#9522,.T.);+#9522=LINE('',#7908,#5289);+#9523=ORIENTED_EDGE('',*,*,#9511,.F.);+#9524=ORIENTED_EDGE('',*,*,#7913,.F.);+#9525=PLANE('',#9526);+#9526=AXIS2_PLACEMENT_3D('',#7908,#13,#7545);+#9527=ADVANCED_FACE('',(#9528),#9535,.T.);+#9528=FACE_BOUND('',#9529,.F.);+#9529=EDGE_LOOP('',(#9530,#7840,#9533,#9534));+#9530=ORIENTED_EDGE('',*,*,#9531,.T.);+#9531=EDGE_CURVE('',#7902,#7837,#9532,.T.);+#9532=LINE('',#7903,#5289);+#9533=ORIENTED_EDGE('',*,*,#9521,.F.);+#9534=ORIENTED_EDGE('',*,*,#7906,.F.);+#9535=CYLINDRICAL_SURFACE('',#9536,0.2);+#9536=AXIS2_PLACEMENT_3D('',#7911,#7553,#7569);+#9537=ADVANCED_FACE('',(#9538),#9545,.F.);+#9538=FACE_BOUND('',#9539,.F.);+#9539=EDGE_LOOP('',(#9540,#7835,#9543,#9544));+#9540=ORIENTED_EDGE('',*,*,#9541,.T.);+#9541=EDGE_CURVE('',#7895,#7830,#9542,.T.);+#9542=LINE('',#7896,#5289);+#9543=ORIENTED_EDGE('',*,*,#9531,.F.);+#9544=ORIENTED_EDGE('',*,*,#7901,.F.);+#9545=PLANE('',#9546);+#9546=AXIS2_PLACEMENT_3D('',#7896,#9390,#7561);+#9547=ADVANCED_FACE('',(#9548),#9553,.F.);+#9548=FACE_BOUND('',#9549,.F.);+#9549=EDGE_LOOP('',(#9550,#7828,#9551,#9552));+#9550=ORIENTED_EDGE('',*,*,#9474,.T.);+#9551=ORIENTED_EDGE('',*,*,#9541,.F.);+#9552=ORIENTED_EDGE('',*,*,#7894,.F.);+#9553=CYLINDRICAL_SURFACE('',#7898,0.1);+#9554=ADVANCED_FACE('',(#9555),#9562,.F.);+#9555=FACE_BOUND('',#9556,.F.);+#9556=EDGE_LOOP('',(#9557,#8557,#9560,#9561));+#9557=ORIENTED_EDGE('',*,*,#9558,.T.);+#9558=EDGE_CURVE('',#8487,#8553,#9559,.T.);+#9559=LINE('',#8488,#5289);+#9560=ORIENTED_EDGE('',*,*,#8573,.F.);+#9561=ORIENTED_EDGE('',*,*,#8492,.F.);+#9562=PLANE('',#9563);+#9563=AXIS2_PLACEMENT_3D('',#8488,#9330,#7598);+#9564=ADVANCED_FACE('',(#9565),#9572,.F.);+#9565=FACE_BOUND('',#9566,.F.);+#9566=EDGE_LOOP('',(#9567,#8551,#9570,#9571));+#9567=ORIENTED_EDGE('',*,*,#9568,.T.);+#9568=EDGE_CURVE('',#8482,#8548,#9569,.T.);+#9569=LINE('',#8483,#5289);+#9570=ORIENTED_EDGE('',*,*,#9558,.F.);+#9571=ORIENTED_EDGE('',*,*,#8486,.F.);+#9572=CYLINDRICAL_SURFACE('',#8490,1.E-01);+#9573=ADVANCED_FACE('',(#9574),#9581,.F.);+#9574=FACE_BOUND('',#9575,.F.);+#9575=EDGE_LOOP('',(#9576,#8546,#9579,#9580));+#9576=ORIENTED_EDGE('',*,*,#9577,.T.);+#9577=EDGE_CURVE('',#8477,#8543,#9578,.T.);+#9578=LINE('',#8478,#5289);+#9579=ORIENTED_EDGE('',*,*,#9568,.F.);+#9580=ORIENTED_EDGE('',*,*,#8481,.F.);+#9581=PLANE('',#9582);+#9582=AXIS2_PLACEMENT_3D('',#8478,#273,#2557);+#9583=ADVANCED_FACE('',(#9584),#9591,.F.);+#9584=FACE_BOUND('',#9585,.F.);+#9585=EDGE_LOOP('',(#9586,#8541,#9589,#9590));+#9586=ORIENTED_EDGE('',*,*,#9587,.T.);+#9587=EDGE_CURVE('',#8472,#8538,#9588,.T.);+#9588=LINE('',#8473,#5289);+#9589=ORIENTED_EDGE('',*,*,#9577,.F.);+#9590=ORIENTED_EDGE('',*,*,#8476,.F.);+#9591=PLANE('',#9592);+#9592=AXIS2_PLACEMENT_3D('',#8473,#2557,#13);+#9593=ADVANCED_FACE('',(#9594),#9601,.F.);+#9594=FACE_BOUND('',#9595,.F.);+#9595=EDGE_LOOP('',(#9596,#8536,#9599,#9600));+#9596=ORIENTED_EDGE('',*,*,#9597,.T.);+#9597=EDGE_CURVE('',#8465,#8531,#9598,.T.);+#9598=LINE('',#8466,#5289);+#9599=ORIENTED_EDGE('',*,*,#9587,.F.);+#9600=ORIENTED_EDGE('',*,*,#8471,.F.);+#9601=PLANE('',#9602);+#9602=AXIS2_PLACEMENT_3D('',#8466,#13,#7545);+#9603=ADVANCED_FACE('',(#9604),#9611,.T.);+#9604=FACE_BOUND('',#9605,.F.);+#9605=EDGE_LOOP('',(#9606,#8529,#9609,#9610));+#9606=ORIENTED_EDGE('',*,*,#9607,.T.);+#9607=EDGE_CURVE('',#8460,#8526,#9608,.T.);+#9608=LINE('',#8461,#5289);+#9609=ORIENTED_EDGE('',*,*,#9597,.F.);+#9610=ORIENTED_EDGE('',*,*,#8464,.F.);+#9611=CYLINDRICAL_SURFACE('',#9612,0.2);+#9612=AXIS2_PLACEMENT_3D('',#8469,#7553,#7569);+#9613=ADVANCED_FACE('',(#9614),#9621,.F.);+#9614=FACE_BOUND('',#9615,.F.);+#9615=EDGE_LOOP('',(#9616,#8524,#9619,#9620));+#9616=ORIENTED_EDGE('',*,*,#9617,.T.);+#9617=EDGE_CURVE('',#8453,#8519,#9618,.T.);+#9618=LINE('',#8454,#5289);+#9619=ORIENTED_EDGE('',*,*,#9607,.F.);+#9620=ORIENTED_EDGE('',*,*,#8459,.F.);+#9621=PLANE('',#9622);+#9622=AXIS2_PLACEMENT_3D('',#8454,#9390,#7561);+#9623=ADVANCED_FACE('',(#9624),#9629,.F.);+#9624=FACE_BOUND('',#9625,.F.);+#9625=EDGE_LOOP('',(#9626,#8517,#9627,#9628));+#9626=ORIENTED_EDGE('',*,*,#9414,.T.);+#9627=ORIENTED_EDGE('',*,*,#9617,.F.);+#9628=ORIENTED_EDGE('',*,*,#8452,.F.);+#9629=CYLINDRICAL_SURFACE('',#8456,0.1);+#9630=ADVANCED_FACE('',(#9631),#9638,.F.);+#9631=FACE_BOUND('',#9632,.F.);+#9632=EDGE_LOOP('',(#9633,#8704,#9636,#9637));+#9633=ORIENTED_EDGE('',*,*,#9634,.T.);+#9634=EDGE_CURVE('',#8634,#8700,#9635,.T.);+#9635=LINE('',#8635,#5289);+#9636=ORIENTED_EDGE('',*,*,#8720,.F.);+#9637=ORIENTED_EDGE('',*,*,#8639,.F.);+#9638=PLANE('',#9639);+#9639=AXIS2_PLACEMENT_3D('',#8635,#9330,#7598);+#9640=ADVANCED_FACE('',(#9641),#9648,.F.);+#9641=FACE_BOUND('',#9642,.F.);+#9642=EDGE_LOOP('',(#9643,#8698,#9646,#9647));+#9643=ORIENTED_EDGE('',*,*,#9644,.T.);+#9644=EDGE_CURVE('',#8629,#8695,#9645,.T.);+#9645=LINE('',#8630,#5289);+#9646=ORIENTED_EDGE('',*,*,#9634,.F.);+#9647=ORIENTED_EDGE('',*,*,#8633,.F.);+#9648=CYLINDRICAL_SURFACE('',#8637,1.E-01);+#9649=ADVANCED_FACE('',(#9650),#9657,.F.);+#9650=FACE_BOUND('',#9651,.F.);+#9651=EDGE_LOOP('',(#9652,#8693,#9655,#9656));+#9652=ORIENTED_EDGE('',*,*,#9653,.T.);+#9653=EDGE_CURVE('',#8624,#8690,#9654,.T.);+#9654=LINE('',#8625,#5289);+#9655=ORIENTED_EDGE('',*,*,#9644,.F.);+#9656=ORIENTED_EDGE('',*,*,#8628,.F.);+#9657=PLANE('',#9658);+#9658=AXIS2_PLACEMENT_3D('',#8625,#273,#2557);+#9659=ADVANCED_FACE('',(#9660),#9667,.F.);+#9660=FACE_BOUND('',#9661,.F.);+#9661=EDGE_LOOP('',(#9662,#8688,#9665,#9666));+#9662=ORIENTED_EDGE('',*,*,#9663,.T.);+#9663=EDGE_CURVE('',#8619,#8685,#9664,.T.);+#9664=LINE('',#8620,#5289);+#9665=ORIENTED_EDGE('',*,*,#9653,.F.);+#9666=ORIENTED_EDGE('',*,*,#8623,.F.);+#9667=PLANE('',#9668);+#9668=AXIS2_PLACEMENT_3D('',#8620,#2557,#13);+#9669=ADVANCED_FACE('',(#9670),#9677,.F.);+#9670=FACE_BOUND('',#9671,.F.);+#9671=EDGE_LOOP('',(#9672,#8683,#9675,#9676));+#9672=ORIENTED_EDGE('',*,*,#9673,.T.);+#9673=EDGE_CURVE('',#8612,#8678,#9674,.T.);+#9674=LINE('',#8613,#5289);+#9675=ORIENTED_EDGE('',*,*,#9663,.F.);+#9676=ORIENTED_EDGE('',*,*,#8618,.F.);+#9677=PLANE('',#9678);+#9678=AXIS2_PLACEMENT_3D('',#8613,#13,#7545);+#9679=ADVANCED_FACE('',(#9680),#9687,.T.);+#9680=FACE_BOUND('',#9681,.F.);+#9681=EDGE_LOOP('',(#9682,#8676,#9685,#9686));+#9682=ORIENTED_EDGE('',*,*,#9683,.T.);+#9683=EDGE_CURVE('',#8607,#8673,#9684,.T.);+#9684=LINE('',#8608,#5289);+#9685=ORIENTED_EDGE('',*,*,#9673,.F.);+#9686=ORIENTED_EDGE('',*,*,#8611,.F.);+#9687=CYLINDRICAL_SURFACE('',#9688,0.2);+#9688=AXIS2_PLACEMENT_3D('',#8616,#7553,#7569);+#9689=ADVANCED_FACE('',(#9690),#9697,.F.);+#9690=FACE_BOUND('',#9691,.F.);+#9691=EDGE_LOOP('',(#9692,#8671,#9695,#9696));+#9692=ORIENTED_EDGE('',*,*,#9693,.T.);+#9693=EDGE_CURVE('',#8600,#8666,#9694,.T.);+#9694=LINE('',#8601,#5289);+#9695=ORIENTED_EDGE('',*,*,#9683,.F.);+#9696=ORIENTED_EDGE('',*,*,#8606,.F.);+#9697=PLANE('',#9698);+#9698=AXIS2_PLACEMENT_3D('',#8601,#9390,#7561);+#9699=ADVANCED_FACE('',(#9700),#9705,.F.);+#9700=FACE_BOUND('',#9701,.F.);+#9701=EDGE_LOOP('',(#9702,#8664,#9703,#9704));+#9702=ORIENTED_EDGE('',*,*,#9424,.T.);+#9703=ORIENTED_EDGE('',*,*,#9693,.F.);+#9704=ORIENTED_EDGE('',*,*,#8599,.F.);+#9705=CYLINDRICAL_SURFACE('',#8603,0.1);+#9706=ADVANCED_FACE('',(#9707),#9714,.F.);+#9707=FACE_BOUND('',#9708,.F.);+#9708=EDGE_LOOP('',(#9709,#8851,#9712,#9713));+#9709=ORIENTED_EDGE('',*,*,#9710,.T.);+#9710=EDGE_CURVE('',#8781,#8847,#9711,.T.);+#9711=LINE('',#8782,#5289);+#9712=ORIENTED_EDGE('',*,*,#8867,.F.);+#9713=ORIENTED_EDGE('',*,*,#8786,.F.);+#9714=PLANE('',#9715);+#9715=AXIS2_PLACEMENT_3D('',#8782,#9330,#7598);+#9716=ADVANCED_FACE('',(#9717),#9724,.F.);+#9717=FACE_BOUND('',#9718,.F.);+#9718=EDGE_LOOP('',(#9719,#8845,#9722,#9723));+#9719=ORIENTED_EDGE('',*,*,#9720,.T.);+#9720=EDGE_CURVE('',#8776,#8842,#9721,.T.);+#9721=LINE('',#8777,#5289);+#9722=ORIENTED_EDGE('',*,*,#9710,.F.);+#9723=ORIENTED_EDGE('',*,*,#8780,.F.);+#9724=CYLINDRICAL_SURFACE('',#8784,1.E-01);+#9725=ADVANCED_FACE('',(#9726),#9733,.F.);+#9726=FACE_BOUND('',#9727,.F.);+#9727=EDGE_LOOP('',(#9728,#8840,#9731,#9732));+#9728=ORIENTED_EDGE('',*,*,#9729,.T.);+#9729=EDGE_CURVE('',#8771,#8837,#9730,.T.);+#9730=LINE('',#8772,#5289);+#9731=ORIENTED_EDGE('',*,*,#9720,.F.);+#9732=ORIENTED_EDGE('',*,*,#8775,.F.);+#9733=PLANE('',#9734);+#9734=AXIS2_PLACEMENT_3D('',#8772,#273,#2557);+#9735=ADVANCED_FACE('',(#9736),#9743,.F.);+#9736=FACE_BOUND('',#9737,.F.);+#9737=EDGE_LOOP('',(#9738,#8835,#9741,#9742));+#9738=ORIENTED_EDGE('',*,*,#9739,.T.);+#9739=EDGE_CURVE('',#8766,#8832,#9740,.T.);+#9740=LINE('',#8767,#5289);+#9741=ORIENTED_EDGE('',*,*,#9729,.F.);+#9742=ORIENTED_EDGE('',*,*,#8770,.F.);+#9743=PLANE('',#9744);+#9744=AXIS2_PLACEMENT_3D('',#8767,#2557,#13);+#9745=ADVANCED_FACE('',(#9746),#9753,.F.);+#9746=FACE_BOUND('',#9747,.F.);+#9747=EDGE_LOOP('',(#9748,#8830,#9751,#9752));+#9748=ORIENTED_EDGE('',*,*,#9749,.T.);+#9749=EDGE_CURVE('',#8759,#8825,#9750,.T.);+#9750=LINE('',#8760,#5289);+#9751=ORIENTED_EDGE('',*,*,#9739,.F.);+#9752=ORIENTED_EDGE('',*,*,#8765,.F.);+#9753=PLANE('',#9754);+#9754=AXIS2_PLACEMENT_3D('',#8760,#13,#7545);+#9755=ADVANCED_FACE('',(#9756),#9763,.T.);+#9756=FACE_BOUND('',#9757,.F.);+#9757=EDGE_LOOP('',(#9758,#8823,#9761,#9762));+#9758=ORIENTED_EDGE('',*,*,#9759,.T.);+#9759=EDGE_CURVE('',#8754,#8820,#9760,.T.);+#9760=LINE('',#8755,#5289);+#9761=ORIENTED_EDGE('',*,*,#9749,.F.);+#9762=ORIENTED_EDGE('',*,*,#8758,.F.);+#9763=CYLINDRICAL_SURFACE('',#9764,0.2);+#9764=AXIS2_PLACEMENT_3D('',#8763,#7553,#7569);+#9765=ADVANCED_FACE('',(#9766),#9773,.F.);+#9766=FACE_BOUND('',#9767,.F.);+#9767=EDGE_LOOP('',(#9768,#8818,#9771,#9772));+#9768=ORIENTED_EDGE('',*,*,#9769,.T.);+#9769=EDGE_CURVE('',#8747,#8813,#9770,.T.);+#9770=LINE('',#8748,#5289);+#9771=ORIENTED_EDGE('',*,*,#9759,.F.);+#9772=ORIENTED_EDGE('',*,*,#8753,.F.);+#9773=PLANE('',#9774);+#9774=AXIS2_PLACEMENT_3D('',#8748,#9390,#7561);+#9775=ADVANCED_FACE('',(#9776),#9781,.F.);+#9776=FACE_BOUND('',#9777,.F.);+#9777=EDGE_LOOP('',(#9778,#8811,#9779,#9780));+#9778=ORIENTED_EDGE('',*,*,#9434,.T.);+#9779=ORIENTED_EDGE('',*,*,#9769,.F.);+#9780=ORIENTED_EDGE('',*,*,#8746,.F.);+#9781=CYLINDRICAL_SURFACE('',#8750,0.1);+#9782=ADVANCED_FACE('',(#9783),#9790,.F.);+#9783=FACE_BOUND('',#9784,.F.);+#9784=EDGE_LOOP('',(#9785,#8998,#9788,#9789));+#9785=ORIENTED_EDGE('',*,*,#9786,.T.);+#9786=EDGE_CURVE('',#8928,#8994,#9787,.T.);+#9787=LINE('',#8929,#5289);+#9788=ORIENTED_EDGE('',*,*,#9014,.F.);+#9789=ORIENTED_EDGE('',*,*,#8933,.F.);+#9790=PLANE('',#9791);+#9791=AXIS2_PLACEMENT_3D('',#8929,#9330,#7598);+#9792=ADVANCED_FACE('',(#9793),#9800,.F.);+#9793=FACE_BOUND('',#9794,.F.);+#9794=EDGE_LOOP('',(#9795,#8992,#9798,#9799));+#9795=ORIENTED_EDGE('',*,*,#9796,.T.);+#9796=EDGE_CURVE('',#8923,#8989,#9797,.T.);+#9797=LINE('',#8924,#5289);+#9798=ORIENTED_EDGE('',*,*,#9786,.F.);+#9799=ORIENTED_EDGE('',*,*,#8927,.F.);+#9800=CYLINDRICAL_SURFACE('',#8931,1.E-01);+#9801=ADVANCED_FACE('',(#9802),#9809,.F.);+#9802=FACE_BOUND('',#9803,.F.);+#9803=EDGE_LOOP('',(#9804,#8987,#9807,#9808));+#9804=ORIENTED_EDGE('',*,*,#9805,.T.);+#9805=EDGE_CURVE('',#8918,#8984,#9806,.T.);+#9806=LINE('',#8919,#5289);+#9807=ORIENTED_EDGE('',*,*,#9796,.F.);+#9808=ORIENTED_EDGE('',*,*,#8922,.F.);+#9809=PLANE('',#9810);+#9810=AXIS2_PLACEMENT_3D('',#8919,#273,#2557);+#9811=ADVANCED_FACE('',(#9812),#9819,.F.);+#9812=FACE_BOUND('',#9813,.F.);+#9813=EDGE_LOOP('',(#9814,#8982,#9817,#9818));+#9814=ORIENTED_EDGE('',*,*,#9815,.T.);+#9815=EDGE_CURVE('',#8913,#8979,#9816,.T.);+#9816=LINE('',#8914,#5289);+#9817=ORIENTED_EDGE('',*,*,#9805,.F.);+#9818=ORIENTED_EDGE('',*,*,#8917,.F.);+#9819=PLANE('',#9820);+#9820=AXIS2_PLACEMENT_3D('',#8914,#2557,#13);+#9821=ADVANCED_FACE('',(#9822),#9829,.F.);+#9822=FACE_BOUND('',#9823,.F.);+#9823=EDGE_LOOP('',(#9824,#8977,#9827,#9828));+#9824=ORIENTED_EDGE('',*,*,#9825,.T.);+#9825=EDGE_CURVE('',#8906,#8972,#9826,.T.);+#9826=LINE('',#8907,#5289);+#9827=ORIENTED_EDGE('',*,*,#9815,.F.);+#9828=ORIENTED_EDGE('',*,*,#8912,.F.);+#9829=PLANE('',#9830);+#9830=AXIS2_PLACEMENT_3D('',#8907,#13,#7545);+#9831=ADVANCED_FACE('',(#9832),#9839,.T.);+#9832=FACE_BOUND('',#9833,.F.);+#9833=EDGE_LOOP('',(#9834,#8970,#9837,#9838));+#9834=ORIENTED_EDGE('',*,*,#9835,.T.);+#9835=EDGE_CURVE('',#8901,#8967,#9836,.T.);+#9836=LINE('',#8902,#5289);+#9837=ORIENTED_EDGE('',*,*,#9825,.F.);+#9838=ORIENTED_EDGE('',*,*,#8905,.F.);+#9839=CYLINDRICAL_SURFACE('',#9840,0.2);+#9840=AXIS2_PLACEMENT_3D('',#8910,#7553,#7569);+#9841=ADVANCED_FACE('',(#9842),#9849,.F.);+#9842=FACE_BOUND('',#9843,.F.);+#9843=EDGE_LOOP('',(#9844,#8965,#9847,#9848));+#9844=ORIENTED_EDGE('',*,*,#9845,.T.);+#9845=EDGE_CURVE('',#8894,#8960,#9846,.T.);+#9846=LINE('',#8895,#5289);+#9847=ORIENTED_EDGE('',*,*,#9835,.F.);+#9848=ORIENTED_EDGE('',*,*,#8900,.F.);+#9849=PLANE('',#9850);+#9850=AXIS2_PLACEMENT_3D('',#8895,#9390,#7561);+#9851=ADVANCED_FACE('',(#9852),#9857,.F.);+#9852=FACE_BOUND('',#9853,.F.);+#9853=EDGE_LOOP('',(#9854,#8958,#9855,#9856));+#9854=ORIENTED_EDGE('',*,*,#9444,.T.);+#9855=ORIENTED_EDGE('',*,*,#9845,.F.);+#9856=ORIENTED_EDGE('',*,*,#8893,.F.);+#9857=CYLINDRICAL_SURFACE('',#8897,0.1);+#9858=ADVANCED_FACE('',(#9859),#9866,.F.);+#9859=FACE_BOUND('',#9860,.F.);+#9860=EDGE_LOOP('',(#9861,#9145,#9864,#9865));+#9861=ORIENTED_EDGE('',*,*,#9862,.T.);+#9862=EDGE_CURVE('',#9075,#9141,#9863,.T.);+#9863=LINE('',#9076,#5289);+#9864=ORIENTED_EDGE('',*,*,#9161,.F.);+#9865=ORIENTED_EDGE('',*,*,#9080,.F.);+#9866=PLANE('',#9867);+#9867=AXIS2_PLACEMENT_3D('',#9076,#9330,#7598);+#9868=ADVANCED_FACE('',(#9869),#9876,.F.);+#9869=FACE_BOUND('',#9870,.F.);+#9870=EDGE_LOOP('',(#9871,#9139,#9874,#9875));+#9871=ORIENTED_EDGE('',*,*,#9872,.T.);+#9872=EDGE_CURVE('',#9070,#9136,#9873,.T.);+#9873=LINE('',#9071,#5289);+#9874=ORIENTED_EDGE('',*,*,#9862,.F.);+#9875=ORIENTED_EDGE('',*,*,#9074,.F.);+#9876=CYLINDRICAL_SURFACE('',#9078,1.E-01);+#9877=ADVANCED_FACE('',(#9878),#9885,.F.);+#9878=FACE_BOUND('',#9879,.F.);+#9879=EDGE_LOOP('',(#9880,#9134,#9883,#9884));+#9880=ORIENTED_EDGE('',*,*,#9881,.T.);+#9881=EDGE_CURVE('',#9065,#9131,#9882,.T.);+#9882=LINE('',#9066,#5289);+#9883=ORIENTED_EDGE('',*,*,#9872,.F.);+#9884=ORIENTED_EDGE('',*,*,#9069,.F.);+#9885=PLANE('',#9886);+#9886=AXIS2_PLACEMENT_3D('',#9066,#273,#2557);+#9887=ADVANCED_FACE('',(#9888),#9895,.F.);+#9888=FACE_BOUND('',#9889,.F.);+#9889=EDGE_LOOP('',(#9890,#9129,#9893,#9894));+#9890=ORIENTED_EDGE('',*,*,#9891,.T.);+#9891=EDGE_CURVE('',#9060,#9126,#9892,.T.);+#9892=LINE('',#9061,#5289);+#9893=ORIENTED_EDGE('',*,*,#9881,.F.);+#9894=ORIENTED_EDGE('',*,*,#9064,.F.);+#9895=PLANE('',#9896);+#9896=AXIS2_PLACEMENT_3D('',#9061,#2557,#13);+#9897=ADVANCED_FACE('',(#9898),#9905,.F.);+#9898=FACE_BOUND('',#9899,.F.);+#9899=EDGE_LOOP('',(#9900,#9124,#9903,#9904));+#9900=ORIENTED_EDGE('',*,*,#9901,.T.);+#9901=EDGE_CURVE('',#9053,#9119,#9902,.T.);+#9902=LINE('',#9054,#5289);+#9903=ORIENTED_EDGE('',*,*,#9891,.F.);+#9904=ORIENTED_EDGE('',*,*,#9059,.F.);+#9905=PLANE('',#9906);+#9906=AXIS2_PLACEMENT_3D('',#9054,#13,#7545);+#9907=ADVANCED_FACE('',(#9908),#9915,.T.);+#9908=FACE_BOUND('',#9909,.F.);+#9909=EDGE_LOOP('',(#9910,#9117,#9913,#9914));+#9910=ORIENTED_EDGE('',*,*,#9911,.T.);+#9911=EDGE_CURVE('',#9048,#9114,#9912,.T.);+#9912=LINE('',#9049,#5289);+#9913=ORIENTED_EDGE('',*,*,#9901,.F.);+#9914=ORIENTED_EDGE('',*,*,#9052,.F.);+#9915=CYLINDRICAL_SURFACE('',#9916,0.2);+#9916=AXIS2_PLACEMENT_3D('',#9057,#7553,#7569);+#9917=ADVANCED_FACE('',(#9918),#9925,.F.);+#9918=FACE_BOUND('',#9919,.F.);+#9919=EDGE_LOOP('',(#9920,#9112,#9923,#9924));+#9920=ORIENTED_EDGE('',*,*,#9921,.T.);+#9921=EDGE_CURVE('',#9041,#9107,#9922,.T.);+#9922=LINE('',#9042,#5289);+#9923=ORIENTED_EDGE('',*,*,#9911,.F.);+#9924=ORIENTED_EDGE('',*,*,#9047,.F.);+#9925=PLANE('',#9926);+#9926=AXIS2_PLACEMENT_3D('',#9042,#9390,#7561);+#9927=ADVANCED_FACE('',(#9928),#9933,.F.);+#9928=FACE_BOUND('',#9929,.F.);+#9929=EDGE_LOOP('',(#9930,#9105,#9931,#9932));+#9930=ORIENTED_EDGE('',*,*,#9454,.T.);+#9931=ORIENTED_EDGE('',*,*,#9921,.F.);+#9932=ORIENTED_EDGE('',*,*,#9040,.F.);+#9933=CYLINDRICAL_SURFACE('',#9044,0.1);+#9934=ADVANCED_FACE('',(#9935),#9942,.F.);+#9935=FACE_BOUND('',#9936,.F.);+#9936=EDGE_LOOP('',(#9937,#9292,#9940,#9941));+#9937=ORIENTED_EDGE('',*,*,#9938,.T.);+#9938=EDGE_CURVE('',#9222,#9288,#9939,.T.);+#9939=LINE('',#9223,#5289);+#9940=ORIENTED_EDGE('',*,*,#9308,.F.);+#9941=ORIENTED_EDGE('',*,*,#9227,.F.);+#9942=PLANE('',#9943);+#9943=AXIS2_PLACEMENT_3D('',#9223,#9330,#7598);+#9944=ADVANCED_FACE('',(#9945),#9952,.F.);+#9945=FACE_BOUND('',#9946,.F.);+#9946=EDGE_LOOP('',(#9947,#9286,#9950,#9951));+#9947=ORIENTED_EDGE('',*,*,#9948,.T.);+#9948=EDGE_CURVE('',#9217,#9283,#9949,.T.);+#9949=LINE('',#9218,#5289);+#9950=ORIENTED_EDGE('',*,*,#9938,.F.);+#9951=ORIENTED_EDGE('',*,*,#9221,.F.);+#9952=CYLINDRICAL_SURFACE('',#9225,1.E-01);+#9953=ADVANCED_FACE('',(#9954),#9961,.F.);+#9954=FACE_BOUND('',#9955,.F.);+#9955=EDGE_LOOP('',(#9956,#9281,#9959,#9960));+#9956=ORIENTED_EDGE('',*,*,#9957,.T.);+#9957=EDGE_CURVE('',#9212,#9278,#9958,.T.);+#9958=LINE('',#9213,#5289);+#9959=ORIENTED_EDGE('',*,*,#9948,.F.);+#9960=ORIENTED_EDGE('',*,*,#9216,.F.);+#9961=PLANE('',#9962);+#9962=AXIS2_PLACEMENT_3D('',#9213,#273,#2557);+#9963=ADVANCED_FACE('',(#9964),#9971,.F.);+#9964=FACE_BOUND('',#9965,.F.);+#9965=EDGE_LOOP('',(#9966,#9276,#9969,#9970));+#9966=ORIENTED_EDGE('',*,*,#9967,.T.);+#9967=EDGE_CURVE('',#9207,#9273,#9968,.T.);+#9968=LINE('',#9208,#5289);+#9969=ORIENTED_EDGE('',*,*,#9957,.F.);+#9970=ORIENTED_EDGE('',*,*,#9211,.F.);+#9971=PLANE('',#9972);+#9972=AXIS2_PLACEMENT_3D('',#9208,#2557,#13);+#9973=ADVANCED_FACE('',(#9974),#9981,.F.);+#9974=FACE_BOUND('',#9975,.F.);+#9975=EDGE_LOOP('',(#9976,#9271,#9979,#9980));+#9976=ORIENTED_EDGE('',*,*,#9977,.T.);+#9977=EDGE_CURVE('',#9200,#9266,#9978,.T.);+#9978=LINE('',#9201,#5289);+#9979=ORIENTED_EDGE('',*,*,#9967,.F.);+#9980=ORIENTED_EDGE('',*,*,#9206,.F.);+#9981=PLANE('',#9982);+#9982=AXIS2_PLACEMENT_3D('',#9201,#13,#7545);+#9983=ADVANCED_FACE('',(#9984),#9991,.T.);+#9984=FACE_BOUND('',#9985,.F.);+#9985=EDGE_LOOP('',(#9986,#9264,#9989,#9990));+#9986=ORIENTED_EDGE('',*,*,#9987,.T.);+#9987=EDGE_CURVE('',#9195,#9261,#9988,.T.);+#9988=LINE('',#9196,#5289);+#9989=ORIENTED_EDGE('',*,*,#9977,.F.);+#9990=ORIENTED_EDGE('',*,*,#9199,.F.);+#9991=CYLINDRICAL_SURFACE('',#9992,0.2);+#9992=AXIS2_PLACEMENT_3D('',#9204,#7553,#7569);+#9993=ADVANCED_FACE('',(#9994),#10001,.F.);+#9994=FACE_BOUND('',#9995,.F.);+#9995=EDGE_LOOP('',(#9996,#9259,#9999,#10000));+#9996=ORIENTED_EDGE('',*,*,#9997,.T.);+#9997=EDGE_CURVE('',#9188,#9254,#9998,.T.);+#9998=LINE('',#9189,#5289);+#9999=ORIENTED_EDGE('',*,*,#9987,.F.);+#10000=ORIENTED_EDGE('',*,*,#9194,.F.);+#10001=PLANE('',#10002);+#10002=AXIS2_PLACEMENT_3D('',#9189,#9390,#7561);+#10003=ADVANCED_FACE('',(#10004),#10009,.F.);+#10004=FACE_BOUND('',#10005,.F.);+#10005=EDGE_LOOP('',(#10006,#9252,#10007,#10008));+#10006=ORIENTED_EDGE('',*,*,#9464,.T.);+#10007=ORIENTED_EDGE('',*,*,#9997,.F.);+#10008=ORIENTED_EDGE('',*,*,#9187,.F.);+#10009=CYLINDRICAL_SURFACE('',#9191,0.1);+#10010=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10014)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#10011,#10012,#10013)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#10011=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#10012=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#10013=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#10014=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-05),#10011,'distance_accuracy_value','confusion accuracy');+#10015=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#10016=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#10017,#10027,#10028,#10029,#10030,#10039,#10040,#10041,#10042,#10043,#10044,#10045,#10046,#10047,#10048,#10049,#10050,#10051,#10052,#10053,#10054,#10055,#10056,#10057,#10058,#10059,#10060,#10061,#10062,#10063,#10064,#10065,#10066,#10067,#10068,#10069,#10070,#10071,#10072,#10073,#10074,#10075,#10076,#10077,#10078,#10079,#10080,#10081,#10082,#10083,#10084,#10085,#10086,#10087,#10088,#10089,#10090,#10091,#10092,#10093,#10094,#10095,#10096,#10097,#10098,#10099,#10100,#10101,#10102,#10103,#10104,#10105,#10106,#10107,#10108,#10109,#10110,#10111,#10112,#10113,#10114,#10115,#10116,#10117,#10118,#10119,#10120,#10129,#10130,#10131,#10132,#10133,#10134,#10135,#10136,#10137,#10138,#10139,#10140,#10141,#10142,#10143,#10144,#10145,#10146,#10147,#10148,#10149,#10150,#10151,#10152,#10153,#10154,#10155,#10156,#10157,#10158,#10159,#10160,#10161,#10162,#10163,#10164,#10165,#10166,#10167,#10168,#10169,#10170,#10171,#10172,#10173,#10174,#10175,#10176,#10177,#10178,#10179,#10180,#10181,#10182,#10183,#10184,#10185,#10186,#10187,#10188,#10189,#10190,#10191,#10192,#10193,#10194,#10195,#10196,#10197,#10198,#10199,#10200,#10201,#10202,#10203,#10204,#10205,#10206,#10207,#10208,#10209,#10210,#10211,#10212,#10213,#10214,#10215,#10216,#10217,#10218,#10219,#10220,#10221,#10222,#10223,#10224,#10225,#10226,#10227,#10228,#10229,#10230,#10231,#10232,#10233,#10234,#10235,#10236,#10237,#10238,#10239,#10240,#10241,#10242,#10243,#10244,#10245,#10246,#10247,#10248,#10249,#10250,#10251,#10252,#10253,#10254,#10255,#10256,#10257,#10258,#10259,#10260,#10261,#10262,#10263,#10264,#10265,#10266,#10267,#10268,#10269,#10270,#10271,#10272,#10273,#10274,#10275,#10276,#10277,#10278,#10279,#10280,#10281,#10282,#10283,#10284,#10285,#10286,#10287,#10288,#10289,#10290,#10291,#10292,#10293,#10294,#10295,#10296,#10297,#10298,#10299,#10300,#10301,#10302,#10303,#10304,#10305,#10306,#10307,#10308,#10309,#10310,#10311,#10312,#10313,#10314,#10315,#10316,#10317,#10318,#10319,#10320,#10321,#10322,#10323,#10324,#10325,#10326,#10327,#10328,#10329,#10330,#10331,#10332,#10333,#10334,#10335,#10336,#10337,#10338,#10339,#10340,#10341,#10342,#10343,#10344,#10345,#10346,#10347,#10348,#10349,#10350,#10351,#10352,#10353,#10354,#10355,#10356,#10357,#10358,#10359,#10360,#10361,#10362,#10363,#10364,#10365,#10366,#10367,#10368,#10369,#10370,#10371,#10372,#10373,#10374,#10375,#10376,#10377,#10378,#10379,#10380,#10381,#10382,#10383,#10384,#10385,#10386,#10387,#10388,#10389,#10390,#10391,#10392,#10393,#10394,#10395,#10396,#10397,#10398,#10399,#10400,#10401,#10402,#10403,#10404,#10405,#10406,#10407,#10408,#10409,#10410,#10411,#10412,#10413,#10414,#10415,#10416,#10417,#10418,#10419,#10420,#10421,#10422,#10423,#10424,#10425,#10426,#10427,#10428,#10429,#10430,#10431,#10432,#10433,#10434,#10435,#10436,#10437,#10438,#10439,#10440,#10441,#10442,#10443,#10444,#10445,#10446,#10447,#10448,#10449,#10450,#10451,#10452,#10453,#10454,#10455,#10456,#10457,#10458,#10459,#10460,#10461,#10462,#10463,#10464,#10465,#10466,#10467,#10468,#10469,#10470,#10471,#10472,#10473,#10474,#10475,#10476,#10477,#10478,#10479,#10480,#10481,#10482,#10483,#10484,#10485,#10486,#10487,#10488,#10489,#10490,#10491,#10492,#10493,#10494,#10495,#10496,#10497,#10498,#10499,#10500,#10501,#10502,#10503,#10504,#10505,#10506,#10507,#10508,#10509,#10510,#10511,#10512,#10513,#10514,#10515,#10516,#10517,#10518,#10519,#10520,#10521,#10522,#10523,#10524,#10525,#10526,#10527,#10528,#10529,#10530,#10531,#10532,#10533,#10534,#10535,#10536,#10537,#10538,#10539,#10540,#10541,#10542,#10543,#10544,#10545,#10546,#10547,#10548,#10549,#10550,#10551,#10552,#10553,#10554,#10555,#10556),#10010);+#10017=STYLED_ITEM('color',(#10018),#17);+#10018=PRESENTATION_STYLE_ASSIGNMENT((#10019,#10025));+#10019=SURFACE_STYLE_USAGE(.BOTH.,#10020);+#10020=SURFACE_SIDE_STYLE('',(#10021));+#10021=SURFACE_STYLE_FILL_AREA(#10022);+#10022=FILL_AREA_STYLE('',(#10023));+#10023=FILL_AREA_STYLE_COLOUR('',#10024);+#10024=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#10025=CURVE_STYLE('',#10026,POSITIVE_LENGTH_MEASURE(0.1),#10024);+#10026=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#10027=STYLED_ITEM('color',(#10018),#114);+#10028=STYLED_ITEM('color',(#10018),#140);+#10029=STYLED_ITEM('color',(#10018),#195);+#10030=STYLED_ITEM('color',(#10031),#249);+#10031=PRESENTATION_STYLE_ASSIGNMENT((#10032,#10038));+#10032=SURFACE_STYLE_USAGE(.BOTH.,#10033);+#10033=SURFACE_SIDE_STYLE('',(#10034));+#10034=SURFACE_STYLE_FILL_AREA(#10035);+#10035=FILL_AREA_STYLE('',(#10036));+#10036=FILL_AREA_STYLE_COLOUR('',#10037);+#10037=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#10038=CURVE_STYLE('',#10026,POSITIVE_LENGTH_MEASURE(0.1),#10037);+#10039=STYLED_ITEM('color',(#10018),#274);+#10040=STYLED_ITEM('color',(#10031),#287);+#10041=STYLED_ITEM('color',(#10018),#309);+#10042=STYLED_ITEM('color',(#10031),#322);+#10043=STYLED_ITEM('color',(#10018),#344);+#10044=STYLED_ITEM('color',(#10031),#357);+#10045=STYLED_ITEM('color',(#10018),#379);+#10046=STYLED_ITEM('color',(#10031),#392);+#10047=STYLED_ITEM('color',(#10018),#414);+#10048=STYLED_ITEM('color',(#10031),#427);+#10049=STYLED_ITEM('color',(#10018),#449);+#10050=STYLED_ITEM('color',(#10031),#462);+#10051=STYLED_ITEM('color',(#10018),#484);+#10052=STYLED_ITEM('color',(#10031),#497);+#10053=STYLED_ITEM('color',(#10018),#519);+#10054=STYLED_ITEM('color',(#10018),#552);+#10055=STYLED_ITEM('color',(#10018),#572);+#10056=STYLED_ITEM('color',(#10018),#656);+#10057=STYLED_ITEM('color',(#10018),#693);+#10058=STYLED_ITEM('color',(#10018),#730);+#10059=STYLED_ITEM('color',(#10018),#794);+#10060=STYLED_ITEM('color',(#10018),#813);+#10061=STYLED_ITEM('color',(#10031),#831);+#10062=STYLED_ITEM('color',(#10018),#858);+#10063=STYLED_ITEM('color',(#10018),#938);+#10064=STYLED_ITEM('color',(#10031),#954);+#10065=STYLED_ITEM('color',(#10031),#1029);+#10066=STYLED_ITEM('color',(#10031),#1096);+#10067=STYLED_ITEM('color',(#10018),#1106);+#10068=STYLED_ITEM('color',(#10031),#1118);+#10069=STYLED_ITEM('color',(#10031),#1181);+#10070=STYLED_ITEM('color',(#10031),#1248);+#10071=STYLED_ITEM('color',(#10018),#1258);+#10072=STYLED_ITEM('color',(#10031),#1270);+#10073=STYLED_ITEM('color',(#10031),#1333);+#10074=STYLED_ITEM('color',(#10031),#1400);+#10075=STYLED_ITEM('color',(#10018),#1410);+#10076=STYLED_ITEM('color',(#10031),#1422);+#10077=STYLED_ITEM('color',(#10031),#1485);+#10078=STYLED_ITEM('color',(#10031),#1552);+#10079=STYLED_ITEM('color',(#10018),#1562);+#10080=STYLED_ITEM('color',(#10031),#1574);+#10081=STYLED_ITEM('color',(#10031),#1637);+#10082=STYLED_ITEM('color',(#10031),#1704);+#10083=STYLED_ITEM('color',(#10018),#1714);+#10084=STYLED_ITEM('color',(#10031),#1726);+#10085=STYLED_ITEM('color',(#10031),#1789);+#10086=STYLED_ITEM('color',(#10031),#1856);+#10087=STYLED_ITEM('color',(#10018),#1866);+#10088=STYLED_ITEM('color',(#10031),#1878);+#10089=STYLED_ITEM('color',(#10031),#1941);+#10090=STYLED_ITEM('color',(#10031),#2008);+#10091=STYLED_ITEM('color',(#10018),#2018);+#10092=STYLED_ITEM('color',(#10031),#2030);+#10093=STYLED_ITEM('color',(#10031),#2093);+#10094=STYLED_ITEM('color',(#10031),#2160);+#10095=STYLED_ITEM('color',(#10031),#2170);+#10096=STYLED_ITEM('color',(#10018),#2192);+#10097=STYLED_ITEM('color',(#10018),#2212);+#10098=STYLED_ITEM('color',(#10018),#2228);+#10099=STYLED_ITEM('color',(#10018),#2235);+#10100=STYLED_ITEM('color',(#10018),#2260);+#10101=STYLED_ITEM('color',(#10018),#2287);+#10102=STYLED_ITEM('color',(#10031),#2300);+#10103=STYLED_ITEM('color',(#10018),#2322);+#10104=STYLED_ITEM('color',(#10031),#2335);+#10105=STYLED_ITEM('color',(#10018),#2357);+#10106=STYLED_ITEM('color',(#10031),#2370);+#10107=STYLED_ITEM('color',(#10018),#2392);+#10108=STYLED_ITEM('color',(#10031),#2405);+#10109=STYLED_ITEM('color',(#10018),#2427);+#10110=STYLED_ITEM('color',(#10031),#2440);+#10111=STYLED_ITEM('color',(#10018),#2462);+#10112=STYLED_ITEM('color',(#10031),#2475);+#10113=STYLED_ITEM('color',(#10018),#2497);+#10114=STYLED_ITEM('color',(#10031),#2510);+#10115=STYLED_ITEM('color',(#10018),#2532);+#10116=STYLED_ITEM('color',(#10018),#2563);+#10117=STYLED_ITEM('color',(#10018),#2589);+#10118=STYLED_ITEM('color',(#10018),#2626);+#10119=STYLED_ITEM('color',(#10018),#2652);+#10120=STYLED_ITEM('color',(#10121),#2671);+#10121=PRESENTATION_STYLE_ASSIGNMENT((#10122,#10128));+#10122=SURFACE_STYLE_USAGE(.BOTH.,#10123);+#10123=SURFACE_SIDE_STYLE('',(#10124));+#10124=SURFACE_STYLE_FILL_AREA(#10125);+#10125=FILL_AREA_STYLE('',(#10126));+#10126=FILL_AREA_STYLE_COLOUR('',#10127);+#10127=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#10128=CURVE_STYLE('',#10026,POSITIVE_LENGTH_MEASURE(0.1),#10127);+#10129=STYLED_ITEM('color',(#10018),#2675);+#10130=STYLED_ITEM('color',(#10031),#2693);+#10131=STYLED_ITEM('color',(#10018),#2768);+#10132=STYLED_ITEM('color',(#10031),#2845);+#10133=STYLED_ITEM('color',(#10018),#2911);+#10134=STYLED_ITEM('color',(#10031),#2924);+#10135=STYLED_ITEM('color',(#10018),#2935);+#10136=STYLED_ITEM('color',(#10031),#2972);+#10137=STYLED_ITEM('color',(#10018),#2994);+#10138=STYLED_ITEM('color',(#10031),#3007);+#10139=STYLED_ITEM('color',(#10018),#3029);+#10140=STYLED_ITEM('color',(#10031),#3042);+#10141=STYLED_ITEM('color',(#10018),#3064);+#10142=STYLED_ITEM('color',(#10031),#3077);+#10143=STYLED_ITEM('color',(#10018),#3099);+#10144=STYLED_ITEM('color',(#10031),#3112);+#10145=STYLED_ITEM('color',(#10018),#3134);+#10146=STYLED_ITEM('color',(#10031),#3147);+#10147=STYLED_ITEM('color',(#10018),#3169);+#10148=STYLED_ITEM('color',(#10031),#3182);+#10149=STYLED_ITEM('color',(#10018),#3199);+#10150=STYLED_ITEM('color',(#10018),#3209);+#10151=STYLED_ITEM('color',(#10031),#3247);+#10152=STYLED_ITEM('color',(#10031),#3258);+#10153=STYLED_ITEM('color',(#10031),#3268);+#10154=STYLED_ITEM('color',(#10031),#3278);+#10155=STYLED_ITEM('color',(#10031),#3288);+#10156=STYLED_ITEM('color',(#10031),#3298);+#10157=STYLED_ITEM('color',(#10031),#3308);+#10158=STYLED_ITEM('color',(#10031),#3319);+#10159=STYLED_ITEM('color',(#10031),#3328);+#10160=STYLED_ITEM('color',(#10031),#3336);+#10161=STYLED_ITEM('color',(#10031),#3346);+#10162=STYLED_ITEM('color',(#10031),#3356);+#10163=STYLED_ITEM('color',(#10031),#3366);+#10164=STYLED_ITEM('color',(#10031),#3376);+#10165=STYLED_ITEM('color',(#10031),#3386);+#10166=STYLED_ITEM('color',(#10031),#3396);+#10167=STYLED_ITEM('color',(#10031),#3406);+#10168=STYLED_ITEM('color',(#10031),#3415);+#10169=STYLED_ITEM('color',(#10031),#3423);+#10170=STYLED_ITEM('color',(#10031),#3433);+#10171=STYLED_ITEM('color',(#10031),#3443);+#10172=STYLED_ITEM('color',(#10031),#3453);+#10173=STYLED_ITEM('color',(#10031),#3463);+#10174=STYLED_ITEM('color',(#10031),#3473);+#10175=STYLED_ITEM('color',(#10031),#3483);+#10176=STYLED_ITEM('color',(#10031),#3493);+#10177=STYLED_ITEM('color',(#10031),#3502);+#10178=STYLED_ITEM('color',(#10031),#3510);+#10179=STYLED_ITEM('color',(#10031),#3520);+#10180=STYLED_ITEM('color',(#10031),#3530);+#10181=STYLED_ITEM('color',(#10031),#3540);+#10182=STYLED_ITEM('color',(#10031),#3550);+#10183=STYLED_ITEM('color',(#10031),#3560);+#10184=STYLED_ITEM('color',(#10031),#3570);+#10185=STYLED_ITEM('color',(#10031),#3580);+#10186=STYLED_ITEM('color',(#10031),#3589);+#10187=STYLED_ITEM('color',(#10031),#3597);+#10188=STYLED_ITEM('color',(#10031),#3607);+#10189=STYLED_ITEM('color',(#10031),#3617);+#10190=STYLED_ITEM('color',(#10031),#3627);+#10191=STYLED_ITEM('color',(#10031),#3637);+#10192=STYLED_ITEM('color',(#10031),#3647);+#10193=STYLED_ITEM('color',(#10031),#3657);+#10194=STYLED_ITEM('color',(#10031),#3667);+#10195=STYLED_ITEM('color',(#10031),#3676);+#10196=STYLED_ITEM('color',(#10031),#3684);+#10197=STYLED_ITEM('color',(#10031),#3694);+#10198=STYLED_ITEM('color',(#10031),#3704);+#10199=STYLED_ITEM('color',(#10031),#3714);+#10200=STYLED_ITEM('color',(#10031),#3724);+#10201=STYLED_ITEM('color',(#10031),#3734);+#10202=STYLED_ITEM('color',(#10031),#3744);+#10203=STYLED_ITEM('color',(#10031),#3754);+#10204=STYLED_ITEM('color',(#10031),#3763);+#10205=STYLED_ITEM('color',(#10031),#3771);+#10206=STYLED_ITEM('color',(#10031),#3781);+#10207=STYLED_ITEM('color',(#10031),#3791);+#10208=STYLED_ITEM('color',(#10031),#3801);+#10209=STYLED_ITEM('color',(#10031),#3811);+#10210=STYLED_ITEM('color',(#10031),#3821);+#10211=STYLED_ITEM('color',(#10031),#3831);+#10212=STYLED_ITEM('color',(#10031),#3841);+#10213=STYLED_ITEM('color',(#10031),#3850);+#10214=STYLED_ITEM('color',(#10031),#3858);+#10215=STYLED_ITEM('color',(#10031),#3868);+#10216=STYLED_ITEM('color',(#10031),#3878);+#10217=STYLED_ITEM('color',(#10031),#3888);+#10218=STYLED_ITEM('color',(#10031),#3898);+#10219=STYLED_ITEM('color',(#10031),#3908);+#10220=STYLED_ITEM('color',(#10031),#3918);+#10221=STYLED_ITEM('color',(#10031),#3928);+#10222=STYLED_ITEM('color',(#10031),#3937);+#10223=STYLED_ITEM('color',(#10031),#3945);+#10224=STYLED_ITEM('color',(#10031),#4016);+#10225=STYLED_ITEM('color',(#10031),#4083);+#10226=STYLED_ITEM('color',(#10018),#4093);+#10227=STYLED_ITEM('color',(#10018),#4173);+#10228=STYLED_ITEM('color',(#10018),#4183);+#10229=STYLED_ITEM('color',(#10018),#4249);+#10230=STYLED_ITEM('color',(#10031),#4258);+#10231=STYLED_ITEM('color',(#10031),#4321);+#10232=STYLED_ITEM('color',(#10031),#4386);+#10233=STYLED_ITEM('color',(#10018),#4396);+#10234=STYLED_ITEM('color',(#10031),#4405);+#10235=STYLED_ITEM('color',(#10031),#4468);+#10236=STYLED_ITEM('color',(#10031),#4533);+#10237=STYLED_ITEM('color',(#10018),#4543);+#10238=STYLED_ITEM('color',(#10031),#4552);+#10239=STYLED_ITEM('color',(#10031),#4615);+#10240=STYLED_ITEM('color',(#10031),#4680);+#10241=STYLED_ITEM('color',(#10018),#4690);+#10242=STYLED_ITEM('color',(#10031),#4699);+#10243=STYLED_ITEM('color',(#10031),#4762);+#10244=STYLED_ITEM('color',(#10031),#4827);+#10245=STYLED_ITEM('color',(#10018),#4837);+#10246=STYLED_ITEM('color',(#10031),#4846);+#10247=STYLED_ITEM('color',(#10031),#4909);+#10248=STYLED_ITEM('color',(#10031),#4974);+#10249=STYLED_ITEM('color',(#10018),#4984);+#10250=STYLED_ITEM('color',(#10031),#4993);+#10251=STYLED_ITEM('color',(#10031),#5056);+#10252=STYLED_ITEM('color',(#10031),#5121);+#10253=STYLED_ITEM('color',(#10018),#5131);+#10254=STYLED_ITEM('color',(#10031),#5140);+#10255=STYLED_ITEM('color',(#10031),#5203);+#10256=STYLED_ITEM('color',(#10031),#5268);+#10257=STYLED_ITEM('color',(#10031),#5278);+#10258=STYLED_ITEM('color',(#10018),#5302);+#10259=STYLED_ITEM('color',(#10018),#5322);+#10260=STYLED_ITEM('color',(#10018),#5335);+#10261=STYLED_ITEM('color',(#10018),#5341);+#10262=STYLED_ITEM('color',(#10031),#5360);+#10263=STYLED_ITEM('color',(#10031),#5371);+#10264=STYLED_ITEM('color',(#10031),#5381);+#10265=STYLED_ITEM('color',(#10031),#5391);+#10266=STYLED_ITEM('color',(#10031),#5401);+#10267=STYLED_ITEM('color',(#10031),#5411);+#10268=STYLED_ITEM('color',(#10031),#5421);+#10269=STYLED_ITEM('color',(#10031),#5432);+#10270=STYLED_ITEM('color',(#10031),#5442);+#10271=STYLED_ITEM('color',(#10018),#5450);+#10272=STYLED_ITEM('color',(#10031),#5462);+#10273=STYLED_ITEM('color',(#10018),#5483);+#10274=STYLED_ITEM('color',(#10031),#5496);+#10275=STYLED_ITEM('color',(#10018),#5517);+#10276=STYLED_ITEM('color',(#10031),#5530);+#10277=STYLED_ITEM('color',(#10018),#5551);+#10278=STYLED_ITEM('color',(#10031),#5564);+#10279=STYLED_ITEM('color',(#10018),#5585);+#10280=STYLED_ITEM('color',(#10031),#5598);+#10281=STYLED_ITEM('color',(#10018),#5619);+#10282=STYLED_ITEM('color',(#10031),#5632);+#10283=STYLED_ITEM('color',(#10018),#5653);+#10284=STYLED_ITEM('color',(#10031),#5666);+#10285=STYLED_ITEM('color',(#10018),#5687);+#10286=STYLED_ITEM('color',(#10018),#5697);+#10287=STYLED_ITEM('color',(#10018),#5710);+#10288=STYLED_ITEM('color',(#10018),#5721);+#10289=STYLED_ITEM('color',(#10031),#5734);+#10290=STYLED_ITEM('color',(#10031),#5756);+#10291=STYLED_ITEM('color',(#10031),#5814);+#10292=STYLED_ITEM('color',(#10031),#5869);+#10293=STYLED_ITEM('color',(#10031),#5879);+#10294=STYLED_ITEM('color',(#10031),#5937);+#10295=STYLED_ITEM('color',(#10031),#5992);+#10296=STYLED_ITEM('color',(#10031),#6002);+#10297=STYLED_ITEM('color',(#10031),#6060);+#10298=STYLED_ITEM('color',(#10031),#6115);+#10299=STYLED_ITEM('color',(#10031),#6125);+#10300=STYLED_ITEM('color',(#10031),#6183);+#10301=STYLED_ITEM('color',(#10031),#6238);+#10302=STYLED_ITEM('color',(#10031),#6248);+#10303=STYLED_ITEM('color',(#10031),#6306);+#10304=STYLED_ITEM('color',(#10031),#6361);+#10305=STYLED_ITEM('color',(#10031),#6371);+#10306=STYLED_ITEM('color',(#10031),#6429);+#10307=STYLED_ITEM('color',(#10031),#6484);+#10308=STYLED_ITEM('color',(#10031),#6494);+#10309=STYLED_ITEM('color',(#10031),#6552);+#10310=STYLED_ITEM('color',(#10031),#6607);+#10311=STYLED_ITEM('color',(#10031),#6617);+#10312=STYLED_ITEM('color',(#10031),#6628);+#10313=STYLED_ITEM('color',(#10031),#6637);+#10314=STYLED_ITEM('color',(#10031),#6647);+#10315=STYLED_ITEM('color',(#10031),#6657);+#10316=STYLED_ITEM('color',(#10031),#6667);+#10317=STYLED_ITEM('color',(#10031),#6677);+#10318=STYLED_ITEM('color',(#10031),#6688);+#10319=STYLED_ITEM('color',(#10031),#6697);+#10320=STYLED_ITEM('color',(#10018),#6705);+#10321=STYLED_ITEM('color',(#10031),#6714);+#10322=STYLED_ITEM('color',(#10031),#6724);+#10323=STYLED_ITEM('color',(#10031),#6734);+#10324=STYLED_ITEM('color',(#10031),#6744);+#10325=STYLED_ITEM('color',(#10031),#6754);+#10326=STYLED_ITEM('color',(#10031),#6764);+#10327=STYLED_ITEM('color',(#10031),#6774);+#10328=STYLED_ITEM('color',(#10018),#6784);+#10329=STYLED_ITEM('color',(#10031),#6797);+#10330=STYLED_ITEM('color',(#10018),#6819);+#10331=STYLED_ITEM('color',(#10031),#6832);+#10332=STYLED_ITEM('color',(#10018),#6854);+#10333=STYLED_ITEM('color',(#10031),#6867);+#10334=STYLED_ITEM('color',(#10018),#6889);+#10335=STYLED_ITEM('color',(#10031),#6902);+#10336=STYLED_ITEM('color',(#10018),#6924);+#10337=STYLED_ITEM('color',(#10031),#6937);+#10338=STYLED_ITEM('color',(#10018),#6959);+#10339=STYLED_ITEM('color',(#10031),#6972);+#10340=STYLED_ITEM('color',(#10018),#6994);+#10341=STYLED_ITEM('color',(#10031),#7002);+#10342=STYLED_ITEM('color',(#10031),#7012);+#10343=STYLED_ITEM('color',(#10031),#7021);+#10344=STYLED_ITEM('color',(#10031),#7031);+#10345=STYLED_ITEM('color',(#10031),#7041);+#10346=STYLED_ITEM('color',(#10031),#7051);+#10347=STYLED_ITEM('color',(#10031),#7061);+#10348=STYLED_ITEM('color',(#10031),#7071);+#10349=STYLED_ITEM('color',(#10031),#7078);+#10350=STYLED_ITEM('color',(#10031),#7088);+#10351=STYLED_ITEM('color',(#10031),#7097);+#10352=STYLED_ITEM('color',(#10031),#7107);+#10353=STYLED_ITEM('color',(#10031),#7117);+#10354=STYLED_ITEM('color',(#10031),#7127);+#10355=STYLED_ITEM('color',(#10031),#7137);+#10356=STYLED_ITEM('color',(#10031),#7147);+#10357=STYLED_ITEM('color',(#10031),#7154);+#10358=STYLED_ITEM('color',(#10031),#7164);+#10359=STYLED_ITEM('color',(#10031),#7173);+#10360=STYLED_ITEM('color',(#10031),#7183);+#10361=STYLED_ITEM('color',(#10031),#7193);+#10362=STYLED_ITEM('color',(#10031),#7203);+#10363=STYLED_ITEM('color',(#10031),#7213);+#10364=STYLED_ITEM('color',(#10031),#7223);+#10365=STYLED_ITEM('color',(#10031),#7230);+#10366=STYLED_ITEM('color',(#10031),#7240);+#10367=STYLED_ITEM('color',(#10031),#7249);+#10368=STYLED_ITEM('color',(#10031),#7259);+#10369=STYLED_ITEM('color',(#10031),#7269);+#10370=STYLED_ITEM('color',(#10031),#7279);+#10371=STYLED_ITEM('color',(#10031),#7289);+#10372=STYLED_ITEM('color',(#10031),#7299);+#10373=STYLED_ITEM('color',(#10031),#7306);+#10374=STYLED_ITEM('color',(#10031),#7316);+#10375=STYLED_ITEM('color',(#10031),#7325);+#10376=STYLED_ITEM('color',(#10031),#7335);+#10377=STYLED_ITEM('color',(#10031),#7345);+#10378=STYLED_ITEM('color',(#10031),#7355);+#10379=STYLED_ITEM('color',(#10031),#7365);+#10380=STYLED_ITEM('color',(#10031),#7375);+#10381=STYLED_ITEM('color',(#10031),#7382);+#10382=STYLED_ITEM('color',(#10031),#7392);+#10383=STYLED_ITEM('color',(#10031),#7401);+#10384=STYLED_ITEM('color',(#10031),#7411);+#10385=STYLED_ITEM('color',(#10031),#7421);+#10386=STYLED_ITEM('color',(#10031),#7431);+#10387=STYLED_ITEM('color',(#10031),#7441);+#10388=STYLED_ITEM('color',(#10031),#7451);+#10389=STYLED_ITEM('color',(#10031),#7458);+#10390=STYLED_ITEM('color',(#10031),#7468);+#10391=STYLED_ITEM('color',(#10031),#7477);+#10392=STYLED_ITEM('color',(#10031),#7487);+#10393=STYLED_ITEM('color',(#10031),#7497);+#10394=STYLED_ITEM('color',(#10031),#7507);+#10395=STYLED_ITEM('color',(#10031),#7517);+#10396=STYLED_ITEM('color',(#10031),#7527);+#10397=STYLED_ITEM('color',(#10031),#7534);+#10398=STYLED_ITEM('color',(#10031),#7608);+#10399=STYLED_ITEM('color',(#10031),#7675);+#10400=STYLED_ITEM('color',(#10018),#7685);+#10401=STYLED_ITEM('color',(#10031),#7749);+#10402=STYLED_ITEM('color',(#10031),#7759);+#10403=STYLED_ITEM('color',(#10031),#7769);+#10404=STYLED_ITEM('color',(#10031),#7779);+#10405=STYLED_ITEM('color',(#10031),#7789);+#10406=STYLED_ITEM('color',(#10031),#7799);+#10407=STYLED_ITEM('color',(#10031),#7809);+#10408=STYLED_ITEM('color',(#10031),#7819);+#10409=STYLED_ITEM('color',(#10031),#7880);+#10410=STYLED_ITEM('color',(#10031),#7946);+#10411=STYLED_ITEM('color',(#10031),#7956);+#10412=STYLED_ITEM('color',(#10031),#7966);+#10413=STYLED_ITEM('color',(#10031),#7976);+#10414=STYLED_ITEM('color',(#10031),#7986);+#10415=STYLED_ITEM('color',(#10031),#7996);+#10416=STYLED_ITEM('color',(#10031),#8006);+#10417=STYLED_ITEM('color',(#10031),#8016);+#10418=STYLED_ITEM('color',(#10031),#8024);+#10419=STYLED_ITEM('color',(#10031),#8034);+#10420=STYLED_ITEM('color',(#10031),#8044);+#10421=STYLED_ITEM('color',(#10031),#8054);+#10422=STYLED_ITEM('color',(#10031),#8064);+#10423=STYLED_ITEM('color',(#10031),#8074);+#10424=STYLED_ITEM('color',(#10031),#8084);+#10425=STYLED_ITEM('color',(#10031),#8092);+#10426=STYLED_ITEM('color',(#10031),#8102);+#10427=STYLED_ITEM('color',(#10031),#8112);+#10428=STYLED_ITEM('color',(#10031),#8122);+#10429=STYLED_ITEM('color',(#10031),#8132);+#10430=STYLED_ITEM('color',(#10031),#8142);+#10431=STYLED_ITEM('color',(#10031),#8152);+#10432=STYLED_ITEM('color',(#10031),#8160);+#10433=STYLED_ITEM('color',(#10031),#8170);+#10434=STYLED_ITEM('color',(#10031),#8180);+#10435=STYLED_ITEM('color',(#10031),#8190);+#10436=STYLED_ITEM('color',(#10031),#8200);+#10437=STYLED_ITEM('color',(#10031),#8210);+#10438=STYLED_ITEM('color',(#10031),#8220);+#10439=STYLED_ITEM('color',(#10031),#8228);+#10440=STYLED_ITEM('color',(#10031),#8238);+#10441=STYLED_ITEM('color',(#10031),#8248);+#10442=STYLED_ITEM('color',(#10031),#8258);+#10443=STYLED_ITEM('color',(#10031),#8268);+#10444=STYLED_ITEM('color',(#10031),#8278);+#10445=STYLED_ITEM('color',(#10031),#8288);+#10446=STYLED_ITEM('color',(#10031),#8296);+#10447=STYLED_ITEM('color',(#10031),#8306);+#10448=STYLED_ITEM('color',(#10031),#8316);+#10449=STYLED_ITEM('color',(#10031),#8326);+#10450=STYLED_ITEM('color',(#10031),#8336);+#10451=STYLED_ITEM('color',(#10031),#8346);+#10452=STYLED_ITEM('color',(#10031),#8356);+#10453=STYLED_ITEM('color',(#10031),#8364);+#10454=STYLED_ITEM('color',(#10031),#8374);+#10455=STYLED_ITEM('color',(#10031),#8384);+#10456=STYLED_ITEM('color',(#10031),#8394);+#10457=STYLED_ITEM('color',(#10031),#8404);+#10458=STYLED_ITEM('color',(#10031),#8414);+#10459=STYLED_ITEM('color',(#10031),#8424);+#10460=STYLED_ITEM('color',(#10018),#8432);+#10461=STYLED_ITEM('color',(#10031),#8441);+#10462=STYLED_ITEM('color',(#10031),#8504);+#10463=STYLED_ITEM('color',(#10031),#8569);+#10464=STYLED_ITEM('color',(#10018),#8579);+#10465=STYLED_ITEM('color',(#10031),#8588);+#10466=STYLED_ITEM('color',(#10031),#8651);+#10467=STYLED_ITEM('color',(#10031),#8716);+#10468=STYLED_ITEM('color',(#10018),#8726);+#10469=STYLED_ITEM('color',(#10031),#8735);+#10470=STYLED_ITEM('color',(#10031),#8798);+#10471=STYLED_ITEM('color',(#10031),#8863);+#10472=STYLED_ITEM('color',(#10018),#8873);+#10473=STYLED_ITEM('color',(#10031),#8882);+#10474=STYLED_ITEM('color',(#10031),#8945);+#10475=STYLED_ITEM('color',(#10031),#9010);+#10476=STYLED_ITEM('color',(#10018),#9020);+#10477=STYLED_ITEM('color',(#10031),#9029);+#10478=STYLED_ITEM('color',(#10031),#9092);+#10479=STYLED_ITEM('color',(#10031),#9157);+#10480=STYLED_ITEM('color',(#10018),#9167);+#10481=STYLED_ITEM('color',(#10031),#9176);+#10482=STYLED_ITEM('color',(#10031),#9239);+#10483=STYLED_ITEM('color',(#10031),#9304);+#10484=STYLED_ITEM('color',(#10018),#9314);+#10485=STYLED_ITEM('color',(#10031),#9320);+#10486=STYLED_ITEM('color',(#10031),#9331);+#10487=STYLED_ITEM('color',(#10031),#9340);+#10488=STYLED_ITEM('color',(#10031),#9350);+#10489=STYLED_ITEM('color',(#10031),#9360);+#10490=STYLED_ITEM('color',(#10031),#9370);+#10491=STYLED_ITEM('color',(#10031),#9380);+#10492=STYLED_ITEM('color',(#10031),#9391);+#10493=STYLED_ITEM('color',(#10031),#9400);+#10494=STYLED_ITEM('color',(#10031),#9408);+#10495=STYLED_ITEM('color',(#10031),#9418);+#10496=STYLED_ITEM('color',(#10031),#9428);+#10497=STYLED_ITEM('color',(#10031),#9438);+#10498=STYLED_ITEM('color',(#10031),#9448);+#10499=STYLED_ITEM('color',(#10031),#9458);+#10500=STYLED_ITEM('color',(#10031),#9468);+#10501=STYLED_ITEM('color',(#10031),#9478);+#10502=STYLED_ITEM('color',(#10031),#9488);+#10503=STYLED_ITEM('color',(#10031),#9497);+#10504=STYLED_ITEM('color',(#10031),#9507);+#10505=STYLED_ITEM('color',(#10031),#9517);+#10506=STYLED_ITEM('color',(#10031),#9527);+#10507=STYLED_ITEM('color',(#10031),#9537);+#10508=STYLED_ITEM('color',(#10031),#9547);+#10509=STYLED_ITEM('color',(#10031),#9554);+#10510=STYLED_ITEM('color',(#10031),#9564);+#10511=STYLED_ITEM('color',(#10031),#9573);+#10512=STYLED_ITEM('color',(#10031),#9583);+#10513=STYLED_ITEM('color',(#10031),#9593);+#10514=STYLED_ITEM('color',(#10031),#9603);+#10515=STYLED_ITEM('color',(#10031),#9613);+#10516=STYLED_ITEM('color',(#10031),#9623);+#10517=STYLED_ITEM('color',(#10031),#9630);+#10518=STYLED_ITEM('color',(#10031),#9640);+#10519=STYLED_ITEM('color',(#10031),#9649);+#10520=STYLED_ITEM('color',(#10031),#9659);+#10521=STYLED_ITEM('color',(#10031),#9669);+#10522=STYLED_ITEM('color',(#10031),#9679);+#10523=STYLED_ITEM('color',(#10031),#9689);+#10524=STYLED_ITEM('color',(#10031),#9699);+#10525=STYLED_ITEM('color',(#10031),#9706);+#10526=STYLED_ITEM('color',(#10031),#9716);+#10527=STYLED_ITEM('color',(#10031),#9725);+#10528=STYLED_ITEM('color',(#10031),#9735);+#10529=STYLED_ITEM('color',(#10031),#9745);+#10530=STYLED_ITEM('color',(#10031),#9755);+#10531=STYLED_ITEM('color',(#10031),#9765);+#10532=STYLED_ITEM('color',(#10031),#9775);+#10533=STYLED_ITEM('color',(#10031),#9782);+#10534=STYLED_ITEM('color',(#10031),#9792);+#10535=STYLED_ITEM('color',(#10031),#9801);+#10536=STYLED_ITEM('color',(#10031),#9811);+#10537=STYLED_ITEM('color',(#10031),#9821);+#10538=STYLED_ITEM('color',(#10031),#9831);+#10539=STYLED_ITEM('color',(#10031),#9841);+#10540=STYLED_ITEM('color',(#10031),#9851);+#10541=STYLED_ITEM('color',(#10031),#9858);+#10542=STYLED_ITEM('color',(#10031),#9868);+#10543=STYLED_ITEM('color',(#10031),#9877);+#10544=STYLED_ITEM('color',(#10031),#9887);+#10545=STYLED_ITEM('color',(#10031),#9897);+#10546=STYLED_ITEM('color',(#10031),#9907);+#10547=STYLED_ITEM('color',(#10031),#9917);+#10548=STYLED_ITEM('color',(#10031),#9927);+#10549=STYLED_ITEM('color',(#10031),#9934);+#10550=STYLED_ITEM('color',(#10031),#9944);+#10551=STYLED_ITEM('color',(#10031),#9953);+#10552=STYLED_ITEM('color',(#10031),#9963);+#10553=STYLED_ITEM('color',(#10031),#9973);+#10554=STYLED_ITEM('color',(#10031),#9983);+#10555=STYLED_ITEM('color',(#10031),#9993);+#10556=STYLED_ITEM('color',(#10031),#10003);+ENDSEC;+END-ISO-10303-21;