AT45DB321E-SHF-T

@@ -8,14 +8,14 @@ AT45DB321E-SHF-T from Dialog Semiconductor Adesto Adesto Technologies, in a SOIC  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | SI | input | Serial Input (MOSI). Shifts command, address, and write data into the device on the rising edge of SCK. Ignored while CS is deasserted. |-| 2 | SCK | input | Serial Clock. Provides the clock reference for the SPI interface; input data on SI is latched on the rising edge and output data on SO is clocked out on the falling edge. Supports up to 85MHz (RapidS). |-| 3 | RESET | input | Active-low hardware reset. A low level terminates the operation in progress and holds the internal state machine in idle. Internally supported by a power-on reset; if unused, it is recommended to be driven high externally. |-| 4 | CS | input | Active-low Chip Select. Asserting CS selects the device; deasserting places it in standby (not Deep Power-Down) and tri-states SO. A high-to-low transition begins an operation and low-to-high ends it. |-| 5 | WP | input | Active-low Write Protect. When asserted, sectors specified in the Sector Protection Register are protected from program/erase regardless of software-controlled protection. Internally pulled high; recommended to tie to VCC when unused. |-| 6 | VCC | power_in | Device power supply, 2.3V to 3.6V. Operating outside this range may produce spurious results. |-| 7 | GND | power_in | Ground reference for the power supply and I/O. Connect to the system ground. |-| 8 | SO | output | Serial Output (MISO). Shifts data out on the falling edge of SCK; tri-stated (high impedance) when CS is deasserted. Clock-to-output time (tV) is 6ns maximum. |+| 1 | SI | input | Serial Input. Shifts command, address, and data into the device on the rising edge of SCK. Ignored while CS is deasserted. |+| 2 | SCK | input | Serial Clock. Provides the clock reference; SI is latched on the rising edge, SO is clocked out on the falling edge. |+| 3 | RESET | input | Active-low hardware reset. Low state terminates any in-progress operation and holds the device in reset. Internally pulled and safe during power-on; recommended to be driven high externally when not used. |+| 4 | CS | input | Active-low Chip Select. Enables the device when asserted; when deasserted the device is deselected, SO becomes high-impedance, and inputs are ignored. |+| 5 | WP | input | Active-low Write Protect. When asserted, sectors specified in the Sector Protection Register are protected against program/erase, independent of software protection. Internally pulled high; recommended to tie to VCC when hardware protection is unused. |+| 6 | VCC | power_in | Device power supply, 2.3 V to 3.6 V. |+| 7 | GND | power_in | Ground reference for the power supply. Connect to system ground. |+| 8 | SO | output | Serial Output. Data is clocked out on the falling edge of SCK. High-impedance whenever CS is deasserted. |  ## Key specifications @@ -33,8 +33,8 @@ AT45DB321E-SHF-T from Dialog Semiconductor Adesto Adesto Technologies, in a SOIC - `AT45DB321E-SHF-TSHF2B-T` - `AT45DB321E-SHF-TSHFHA-T` - `AT45DB321E-SHF-TSHFHC-T`-- `AT45DB321E-SHF-TMHF`-- `AT45DB321E-SHF-TCCF`+- `AT45DB321E-SHF-TMWHF-Y`+- `AT45DB321E-SHF-TMWHF2B-T`  ## CAD (KiCad official) 

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Dialog Semiconductor Adesto Adesto Technologies NOR FLASH, SOIC-8-208mil</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="AT45DB321E-SHF-T">+  <description>Dialog Semiconductor Adesto Adesto Technologies NOR FLASH, SOIC-8-208mil</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="AT45DB321E-SHF-T" prefix="U">-  <description></description>+  <description>Dialog Semiconductor Adesto Adesto Technologies NOR FLASH, SOIC-8-208mil</description>   <gates>     <gate name="G$1" symbol="AT45DB321E-SHF-T" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="VCC" pad="6"/>         <connect gate="G$1" pin="WP" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="AT45DB321E-SHF-T" constant="no"/>+          <attribute name="MANUFACTURER" value="Dialog Semiconductor Adesto Adesto Technologies" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -32,49 +32,49 @@         "number": "1",         "name": "SI",         "type": "input",-        "description": "Serial Input (MOSI). Shifts command, address, and write data into the device on the rising edge of SCK. Ignored while CS is deasserted."+        "description": "Serial Input. Shifts command, address, and data into the device on the rising edge of SCK. Ignored while CS is deasserted."       },       {         "number": "2",         "name": "SCK",         "type": "input",-        "description": "Serial Clock. Provides the clock reference for the SPI interface; input data on SI is latched on the rising edge and output data on SO is clocked out on the falling edge. Supports up to 85MHz (RapidS)."+        "description": "Serial Clock. Provides the clock reference; SI is latched on the rising edge, SO is clocked out on the falling edge."       },       {         "number": "3",         "name": "RESET",         "type": "input",-        "description": "Active-low hardware reset. A low level terminates the operation in progress and holds the internal state machine in idle. Internally supported by a power-on reset; if unused, it is recommended to be driven high externally."+        "description": "Active-low hardware reset. Low state terminates any in-progress operation and holds the device in reset. Internally pulled and safe during power-on; recommended to be driven high externally when not used."       },       {         "number": "4",         "name": "CS",         "type": "input",-        "description": "Active-low Chip Select. Asserting CS selects the device; deasserting places it in standby (not Deep Power-Down) and tri-states SO. A high-to-low transition begins an operation and low-to-high ends it."+        "description": "Active-low Chip Select. Enables the device when asserted; when deasserted the device is deselected, SO becomes high-impedance, and inputs are ignored."       },       {         "number": "5",         "name": "WP",         "type": "input",-        "description": "Active-low Write Protect. When asserted, sectors specified in the Sector Protection Register are protected from program/erase regardless of software-controlled protection. Internally pulled high; recommended to tie to VCC when unused."+        "description": "Active-low Write Protect. When asserted, sectors specified in the Sector Protection Register are protected against program/erase, independent of software protection. Internally pulled high; recommended to tie to VCC when hardware protection is unused."       },       {         "number": "6",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply, 2.3V to 3.6V. Operating outside this range may produce spurious results."+        "description": "Device power supply, 2.3 V to 3.6 V."       },       {         "number": "7",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for the power supply and I/O. Connect to the system ground."+        "description": "Ground reference for the power supply. Connect to system ground."       },       {         "number": "8",         "name": "SO",         "type": "output",-        "description": "Serial Output (MISO). Shifts data out on the falling edge of SCK; tri-stated (high impedance) when CS is deasserted. Clock-to-output time (tV) is 6ns maximum."+        "description": "Serial Output. Data is clocked out on the falling edge of SCK. High-impedance whenever CS is deasserted."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/at45db321e-shf-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file