component
AT32F415CBT7
Public Made by Adomby adom
ARTERY Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+356−8@@ -1,13 +1,366 @@ {+ "schema_version": 1,+ "type": "component", "slug": "at32f415cbt7",+ "title": "AT32F415CBT7",+ "brief": "ARTERY Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "ARTERY Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "mcu", "at32f415cbt7" ],+ "component": {+ "mpn": "AT32F415CBT7",+ "manufacturer": "ARTERY",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "MCU",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/94e56713813e1932acfff126ab71a6be.pdf",+ "parts": {+ "symbol": "at32f415cbt7.kicad_sym",+ "footprint": "at32f415cbt7.kicad_mod",+ "model_3d": "at32f415cbt7.glb",+ "model_3d_step": "at32f415cbt7.step",+ "lbr": "at32f415cbt7.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup domain supply. Powers LEXT oscillator, ERTC and 20x 32-bit battery-backed BPR registers when VDD is absent."+ },+ {+ "number": "2",+ "name": "PC13/TAMPER-RTC",+ "type": "bidirectional",+ "description": "GPIO PC13 with alternate TAMPER-RTC. Powered from backup switch; limited to ~3 mA source current so cannot drive LEDs directly."+ },+ {+ "number": "3",+ "name": "PC14/LEXT_IN",+ "type": "bidirectional",+ "description": "GPIO PC14, default alternate is LEXT_IN (32 kHz low-speed external crystal input)."+ },+ {+ "number": "4",+ "name": "PC15/LEXT_OUT",+ "type": "bidirectional",+ "description": "GPIO PC15, default alternate is LEXT_OUT (32 kHz LSE crystal output)."+ },+ {+ "number": "5",+ "name": "PD0/HEXT_IN",+ "type": "bidirectional",+ "description": "Default HEXT_IN (4-25 MHz high-speed external crystal input). Can be remapped to GPIO PD0 by firmware."+ },+ {+ "number": "6",+ "name": "PD1/HEXT_OUT",+ "type": "bidirectional",+ "description": "Default HEXT_OUT (HEXT crystal driver output). Can be remapped to GPIO PD1 by firmware."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low bidirectional reset. External pull-up to VDD; driven low on POR/LVR/watchdog/software reset."+ },+ {+ "number": "8",+ "name": "VSSA/VREF-",+ "type": "power_in",+ "description": "Analog ground / ADC negative reference. Tie to VSS with a low-impedance path."+ },+ {+ "number": "9",+ "name": "VDDA/VREF+",+ "type": "power_in",+ "description": "Analog supply / ADC positive reference (2.6-3.6 V). Decouple to VSSA."+ },+ {+ "number": "10",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0 with WKUP wake-from-standby, ADC1_IN0, CMP1 IN/OUT, USART2_CTS, TMR2/5 channels and TMR1_EXT remap."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1. Alt: ADC1_IN1, CMP1_INP1, USART2_RTS, TMR2_CH2, TMR5_CH2."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2. Alt: ADC1_IN2, CMP2 IN/OUT, USART2_TX, TMR2_CH3, TMR5_CH3, TMR9_CH1; SDIO1_CK remap."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3. Alt: ADC1_IN3, CMP2_INP1, USART2_RX, TMR2_CH4, TMR5_CH4, TMR9_CH2; SDIO1_CMD remap."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4 (5 V-tolerant? no; standard IO). Alt: ADC1_IN4, CMP1/2_INM4, USART2_CK, SPI1_CS, I2S1_WS; SDIO1_D4/D0 remap."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5. Alt: ADC1_IN5, CMP1_INP0, CMP1/2_INM5, SPI1_SCK, I2S1_CK; USART3_CK / SDIO1_D5/D1 remap."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6. Alt: ADC1_IN6, SPI1_MISO, TMR3_CH1; CMP1_OUT / USART3_RX / SDIO1_D6/D2 / TMR1_BRK / TMR10_CH1 remap."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7. Alt: ADC1_IN7, CMP2_INP0, SPI1_MOSI, I2S1_SD, TMR3_CH2; CMP2_OUT / USART3_TX / SDIO1_D7/D3 / TMR1_CH1C / TMR11_CH1 remap."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0. Alt: ADC1_IN8, I2S1_MCK, TMR3_CH3; USART3_RTS / TMR1_CH2C remap."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1. Alt: ADC1_IN9, TMR3_CH4; USART3_CTS / TMR1_CH3C remap."+ },+ {+ "number": "20",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "GPIO PB2 (5 V-tolerant), also sampled as BOOT1 at reset for boot-mode selection."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10 (5 V-tolerant). Alt: I2C2_SCL, USART3_TX; TMR2_CH3 remap."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11 (5 V-tolerant). Alt: I2C2_SDA, USART3_RX; TMR2_CH4 remap."+ },+ {+ "number": "23",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "24",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 2.6-3.6 V."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12 (5 V-tolerant). Alt: USART3_CK, I2C2_SMBA, SPI2_CS, I2S2_WS, TMR1_BRK."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13 (5 V-tolerant). Alt: TMR1_CH1C, USART3_CTS, SPI2_SCK, I2S2_CK."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14 (5 V-tolerant). Alt: TMR1_CH2C, USART3_RTS, SPI2_MISO; TMR9_CH1 remap."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15 (5 V-tolerant). Alt: TMR1_CH3C, ERTC_REFIN, SPI2_MOSI, I2S2_SD; TMR9_CH2 remap."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8 (5 V-tolerant). Alt: OTGFS1_SOF, CLKOUT, USART1_CK, TMR1_CH1; I2C2_SCL remap."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9 (5 V-tolerant). Alt: OTGFS1_VBUS, USART1_TX, TMR1_CH2; I2C2_SMBA remap."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10. Alt: OTGFS1_ID, USART1_RX, TMR1_CH3."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11. Alt: OTGFS1_D-, USART1_CTS, CAN1_RX, TMR1_CH4; CMP1_OUT remap."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12. Alt: OTGFS1_D+, USART1_RTS, CAN1_TX, TMR1_EXT; CMP2_OUT remap."+ },+ {+ "number": "34",+ "name": "PA13/JTMS-SWDIO",+ "type": "bidirectional",+ "description": "Default JTMS/SWDIO debug pin (5 V-tolerant). Can be freed to GPIO PA13 by remap."+ },+ {+ "number": "35",+ "name": "PF6",+ "type": "bidirectional",+ "description": "GPIO PF6 (5 V-tolerant). Remap: I2C1_SCL / I2C2_SCL."+ },+ {+ "number": "36",+ "name": "PF7",+ "type": "bidirectional",+ "description": "GPIO PF7 (5 V-tolerant). Remap: I2C1_SDA / I2C2_SDA."+ },+ {+ "number": "37",+ "name": "PA14/JTCK-SWCLK",+ "type": "bidirectional",+ "description": "Default JTCK/SWCLK debug clock (5 V-tolerant). Can be freed to GPIO PA14 by remap."+ },+ {+ "number": "38",+ "name": "PA15/JTDI",+ "type": "bidirectional",+ "description": "Default JTDI debug pin (5 V-tolerant). Remap: PA15 GPIO, SPI1/2_CS, I2S1/2_WS, TMR2_CH1, TMR2_EXT."+ },+ {+ "number": "39",+ "name": "PB3/JTDO",+ "type": "bidirectional",+ "description": "Default JTDO/SWO debug pin (5 V-tolerant). Remap: PB3 GPIO, SPI1/2_SCK, I2S1/2_CK, TMR2_CH2."+ },+ {+ "number": "40",+ "name": "PB4/NJTRST",+ "type": "bidirectional",+ "description": "Default NJTRST JTAG reset (5 V-tolerant, active low). Remap: PB4 GPIO, SPI1/2_MISO, I2C2_SDA, TMR3_CH1."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 (5 V-tolerant). Alt: I2C1_SMBA; remap SPI1_MOSI/I2S1_SD, SPI2_MOSI/I2S2_SD, TMR3_CH2."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6 (5 V-tolerant). Alt: I2C1_SCL, TMR4_CH1; USART1_TX / I2S1_MCK remap."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7 (5 V-tolerant). Alt: I2C1_SDA, TMR4_CH2; USART1_RX remap."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot-mode select input sampled at reset (with BOOT1/PB2) to select flash, system-memory (bootloader), or SRAM boot."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO PB8 (5 V-tolerant). Alt: SDIO1_D4, TMR4_CH3, TMR10_CH1; I2C1_SCL / CAN1_RX remap."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO PB9 (5 V-tolerant). Alt: SDIO1_D5, TMR4_CH4, TMR11_CH1; I2C1_SDA / CAN1_TX remap."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital supply, 2.6-3.6 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/94e56713813e1932acfff126ab71a6be.pdf",+ "pages": 75,+ "sha256": "7bd001051ee57bd1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "ARTERY",+ "Package": "LQFP-48(7x7)",+ "Category": "MCU",+ "Pins": "48"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "at32f415cbt7"+ ],+ "discovery_pitch": "AT32F415CBT7 (ARTERY) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +378,5 @@ "docs/at32f415cbt7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }