component
AT24HC02C-SSHM-T
Public Made by Adomby adom
Microchip EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,19 +32,19 @@ "number": "1", "name": "A0", "type": "input",- "description": "Device address input, hard-wired to GND or VCC to set the least-significant bit of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up \u2264 10 k\u03a9."+ "description": "Device address input, hard-wired to GND or VCC to set the least-significant bit of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up ≤ 10 kΩ." }, { "number": "2", "name": "A1", "type": "input",- "description": "Device address input, hard-wired to GND or VCC to set the middle bit of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up \u2264 10 k\u03a9."+ "description": "Device address input, hard-wired to GND or VCC to set the middle bit of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up ≤ 10 kΩ." }, { "number": "3", "name": "A2", "type": "input",- "description": "Device address input, hard-wired to GND or VCC to set the most-significant of the three cascade bits of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up \u2264 10 k\u03a9."+ "description": "Device address input, hard-wired to GND or VCC to set the most-significant of the three cascade bits of the I2C slave address. Internally pulled down to GND if left floating; recommended external pull-up ≤ 10 kΩ." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "Serial data pin, open-drain bidirectional I/O for the I2C bus. Requires external pull-up (\u2264 10 k\u03a9 recommended) and may be wire-ORed with other open-drain devices on the same bus."+ "description": "Serial data pin, open-drain bidirectional I/O for the I2C bus. Requires external pull-up (≤ 10 kΩ recommended) and may be wire-ORed with other open-drain devices on the same bus." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "WP", "type": "input",- "description": "Write-Protect input. Tie to GND for normal write operations; tie to VCC to inhibit writes to the upper-half (1K) of the array. Internally pulled down to GND if left floating; recommended external pull-up \u2264 10 k\u03a9."+ "description": "Write-Protect input. Tie to GND for normal write operations; tie to VCC to inhibit writes to the upper-half (1K) of the array. Internally pulled down to GND if left floating; recommended external pull-up ≤ 10 kΩ." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/at24hc02c-sshm-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }