component
AT24CSW020-STUM-T
Public Made by Adomby adom
Microchip Tech EEPROM, TSOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -44,7 +44,7 @@ "number": "3", "name": "SDA", "type": "bidirectional",- "description": "Serial Data. Open-drain bidirectional I/O used to transfer data serially to/from the device. Requires an external pull-up resistor (<=10 k\u03a9); may be wire-ORed with other open-drain/open-collector devices on the same bus."+ "description": "Serial Data. Open-drain bidirectional I/O used to transfer data serially to/from the device. Requires an external pull-up resistor (<=10 kΩ); may be wire-ORed with other open-drain/open-collector devices on the same bus." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "WP", "type": "input",- "description": "Write-Protect input. Tied to GND allows normal write operations; tied directly to VCC inhibits all writes to the protected memory (full array and Security Register). Internally pulled down to GND if left floating (CMOS trip point ~0.5 x VCC). Microchip recommends driving to a known state; when using a pull-up, <=10 k\u03a9."+ "description": "Write-Protect input. Tied to GND allows normal write operations; tied directly to VCC inhibits all writes to the protected memory (full array and Security Register). Internally pulled down to GND if left floating (CMOS trip point ~0.5 x VCC). Microchip recommends driving to a known state; when using a pull-up, <=10 kΩ." } ], "provenance": {@@ -130,5 +130,8 @@ "docs/at24csw020-stum-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }