component
AT24CS32-STUM-T
Public Made by Adomby adom
Microchip Memory, SOT-23-5. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.
← Commit history
Publish 0.1.1
3 files changed
+11299−11542
diff truncated
README.md+12−9@@ -4,17 +4,17 @@ **Microchip** · Memory · SOT-23-5 -AT24CS32-STUM-T from Microchip, in a SOT-23-5. Symbol, footprint and 3D model are the ones used on Adom board designs (KiCad official libraries). Pin functions are extracted from the manufacturer datasheet with page references. **Staged for validation: see the open items in the verification log above.**+AT24CS32-STUM-T from Microchip, in a SOT-23-5. Symbol and footprint are the ones used on Adom board designs (KiCad official libraries); the 3D model is KiCad's TSOT-23-5 library model, checked against Microchip's NMB package drawing. Pin functions are extracted from the manufacturer datasheet with page references. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | SCL | input | I2C serial clock input. Positive-edge clocks data into the EEPROM and negative-edge clocks data out. Schmitt-trigger / filtered input for noise suppression. CIN = 6 pF typ. [datasheet p.2] |-| 2 | GND | power_in | Device ground reference. Return path for all supply and signal currents. [datasheet p.2] |-| 3 | SDA | bidirectional | I2C serial data. Bidirectional, open-drain output; requires an external pull-up to VCC and may be wire-ORed with other open-drain devices on the bus. CI/O = 8 pF typ. Supports 400kHz (1.7V) and 1MHz (2.5V/5.0V) operation. [datasheet p.2] |-| 4 | VCC | power_in | Power supply, 1.7V to 5.5V (absolute max 6.25V). Typical ICC = 0.4 mA read / 2.0 mA write at 5.0V; standby ISB2 ≤ 6.0 µA at 5.5V. Decouple with a local ceramic bypass capacitor to GND. [datasheet p.2] |-| 5 | WP | input | Write Protect. Tie to GND for normal read/write operation of the full array; tie to VCC to inhibit all write operations while still allowing reads. Provides hardware data protection. [datasheet p.2] |+| 1 | SCL | input | Serial Clock: clocks data into and out of the device; data on SDA is latched on the rising edge of SCL and clocked out on the falling edge. Force SCL high when the bus is idle or pull it high with an external resistor. [datasheet p.5] |+| 2 | GND | power_in | Ground: the ground reference for the power supply; connect to the system ground. [datasheet p.5] |+| 3 | SDA | bidirectional | Serial Data: open-drain bidirectional input/output for data transfer; pull high with an external resistor not exceeding 10 kΩ; may be wire-ORed with other open-drain or open-collector pins on the bus. [datasheet p.5] |+| 4 | VCC | power_in | Device Power Supply [datasheet p.6]; VCC = 1.7 V to 5.5 V. [datasheet p.1] |+| 5 | WP | input | Write-Protect: connected to GND allows normal write operations; connected directly to VCC inhibits all write operations to the protected memory. Internally pulled down to GND if left floating; tie it to a known state (pull-up of 10 kΩ or less). [datasheet p.5] | ## Key specifications @@ -25,20 +25,23 @@ AT24CS32-STUM-T from Microchip, in a SOT-23-5. Symbol, footprint and 3D model ar | Category | Memory | | Pins | 5 | | LCSC | C147891 |+| Ordering code | AT24CS32-STUM-T (SOT23, package drawing code NMB, tape and reel) |+| Mouser | 556-AT24CS32-STUM-T |+| DigiKey | AT24CS32-STUM-TTR-ND | | Distributor summary (LCSC listing, not datasheet) | -40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 32Kbit 5ms Hardware write protection function、Noise suppression function I2C SOT-23-5 EEPROM ROHS | ## CAD - Symbol: `at24cs32-stum-t` (source library `Memory_EEPROM:AT24CS32-STUM`) - Footprint: `Package_TO_SOT_SMD:SOT-23-5`-- 3D model path in footprint: `${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step`+- 3D model path in footprint: `${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/TSOT-23-5.step` (KiCad library model, CC-BY-SA 4.0 with the KiCad library exception; checked against Microchip drawing C04-21344 Rev B; original bytes in `vendor/`, checks in `provenance/3d-model.json`) - 3D files: `at24cs32-stum-t-etched.step` / `at24cs32-stum-t-etched.glb` carry the MPN etch as a separate `Adom.LaserEtch` part; `at24cs32-stum-t.step` / `at24cs32-stum-t.glb` are the bare model. - EAGLE/Fusion library: `at24cs32-stum-t.lbr` (adom-lbr) ## Provenance -- **Datasheet:** [Microchip datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881255526518784) (sha256 `6183943ff98038a1`, retrieved 2026-10-08, tier: lcsc)-- **CAD:** KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards.+- **Datasheet:** [Microchip AT24CS32 data sheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MPD/ProductDocuments/DataSheets/AT24CS32-32Kbit-I2C-Serial-EEPROM-Unique-Serial-Number-DS20006341.pdf) (DS20006341B, Revision B (May 2024), sha256 `4a659cafd5a526fc`, retrieved 2026-10-27, tier: mfr)+- **CAD:** Footprint and symbol: KiCad official libraries (CC-BY-SA 4.0) as used on Adom boards. 3D model: KiCad library TSOT-23-5.step (CC-BY-SA 4.0 with the KiCad library exception, KiCad library team), checked against Microchip's NMB TSOT drawing C04-21344 Rev B; original bytes in vendor/, see provenance/3d-model.json. - **Pins:** KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7). [Datasheet PDF](docs/at24cs32-stum-t-datasheet.pdf)
at24cs32-stum-t-etched.glb⋯ 1 unchanged line ⋯
at24cs32-stum-t-etched.step+11287−11533@@ -1,8 +1,8 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-10-08T17:42:23',('Author'),(- 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+FILE_NAME('Open CASCADE Shape Model','2026-10-27T23:51:40',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.8','Open CASCADE 7.8' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); ENDSEC;@@ -15,34423 +15,14395 @@ DATA; #4 = PRODUCT_DEFINITION_SHAPE('','',#5); #5 = PRODUCT_DEFINITION('design','',#6,#9); #6 = PRODUCT_DEFINITION_FORMATION('','',#7);-#7 = PRODUCT('AT24CS32-STUM-T','AT24CS32-STUM-T','',(#8));+#7 = PRODUCT('Adom.Chip','Adom.Chip','',(#8)); #8 = PRODUCT_CONTEXT('',#2,'mechanical'); #9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#7186); #11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); #12 = CARTESIAN_POINT('',(0.,0.,0.)); #13 = DIRECTION('',(0.,0.,1.)); #14 = DIRECTION('',(1.,0.,-0.));-#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);-#16 = CARTESIAN_POINT('',(0.,0.,0.));-#17 = DIRECTION('',(0.,0.,1.));-#18 = DIRECTION('',(1.,0.,-0.));-#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);-#20 = CARTESIAN_POINT('',(0.,0.,6.9999E-03));-#21 = DIRECTION('',(0.,0.,1.));-#22 = DIRECTION('',(1.,0.,-0.));-#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) -GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(-(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',- '3D Context with UNIT and UNCERTAINTY') );-#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );-#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );-#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#24,- 'distance_accuracy_value','confusion accuracy');-#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));-#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);-#30 = PRODUCT_DEFINITION_SHAPE('','',#31);-#31 = PRODUCT_DEFINITION('design','',#32,#35);-#32 = PRODUCT_DEFINITION_FORMATION('','',#33);-#33 = PRODUCT('SOT-23-5','SOT-23-5','',(#34));-#34 = PRODUCT_CONTEXT('',#2,'mechanical');-#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#7208);-#37 = MANIFOLD_SOLID_BREP('',#38);-#38 = CLOSED_SHELL('',(#39,#156,#337,#390,#465,#513,#734,#899,#952,#1005- ,#1037,#1083,#1351,#1375,#1453,#1534,#1615,#1696,#1777,#1858,#1885,- #1917,#1998,#2079,#2160,#2228,#2274,#2320,#2347,#2467,#2671,#2718,- #2765,#2812,#2961,#3059,#3183,#3468,#3522,#3740,#3787,#4072,#4126,- #4344,#4371,#4629,#4683,#4879,#5137,#5191,#5387,#5414,#5699,#5753,- #5971,#5998,#6027,#6056,#6163,#6189,#6218,#6244,#6271,#6278,#6305,- #6332,#6359,#6386,#6413,#6440,#6467,#6474,#6501,#6528,#6555,#6582,- #6609,#6636,#6663,#6670,#6697,#6724,#6751,#6778,#6805,#6832,#6839,- #6866,#6893,#6920,#6947,#6974,#7001,#7008,#7035,#7062,#7089,#7116,- #7143,#7170,#7197,#7204));-#39 = ADVANCED_FACE('',(#40),#54,.F.);-#40 = FACE_BOUND('',#41,.F.);-#41 = EDGE_LOOP('',(#42,#76,#103,#131));-#42 = ORIENTED_EDGE('',*,*,#43,.T.);-#43 = EDGE_CURVE('',#44,#46,#48,.T.);-#44 = VERTEX_POINT('',#45);-#45 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));-#46 = VERTEX_POINT('',#47);-#47 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));-#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#134,#315,#368,#443,#491,#712,#877,#930,#983,+ #1015,#1061,#1329,#1353,#1431,#1512,#1593,#1674,#1755,#1836,#1863,+ #1895,#1976,#2057,#2138,#2206,#2252,#2298,#2325,#2445,#2649,#2696,+ #2743,#2790,#2939,#3037,#3161,#3446,#3500,#3718,#3765,#4050,#4104,+ #4322,#4349,#4607,#4661,#4857,#5115,#5169,#5365,#5392,#5677,#5731,+ #5949,#5976,#6005,#6034,#6141,#6167,#6196,#6222,#6249,#6256,#6283,+ #6310,#6337,#6364,#6391,#6418,#6445,#6452,#6479,#6506,#6533,#6560,+ #6587,#6614,#6641,#6648,#6675,#6702,#6729,#6756,#6783,#6810,#6817,+ #6844,#6871,#6898,#6925,#6952,#6979,#6986,#7013,#7040,#7067,#7094,+ #7121,#7148,#7175,#7182));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#54,#81,#109));+#20 = ORIENTED_EDGE('',*,*,#21,.T.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(0.680405353927,1.400810707854,0.1));+#26 = SURFACE_CURVE('',#27,(#31,#42),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(1.,1.110223024625E-16,0.));+#31 = PCURVE('',#32,#37);+#32 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#33,#34)+ ,(#35,#36)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#33 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#34 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#35 = CARTESIAN_POINT('',(0.680405353927,1.400810707854,0.1));+#36 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#41);+#38 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39,#40),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.360810707854),.PIECEWISE_BEZIER_KNOTS.);+#39 = CARTESIAN_POINT('',(-6.456413101085E-17,-3.169082947721E-17));+#40 = CARTESIAN_POINT('',(1.41,-1.240142923308E-17));+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#42 = PCURVE('',#43,#48);+#43 = PLANE('',#44);+#44 = AXIS2_PLACEMENT_3D('',#45,#46,#47);+#45 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#46 = DIRECTION('',(0.,0.,1.));+#47 = DIRECTION('',(0.436909980015,-0.899505235873,0.));+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#53); #49 = LINE('',#50,#51);-#50 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#50 = CARTESIAN_POINT('',(0.,0.)); #51 = VECTOR('',#52,1.);-#52 = DIRECTION('',(1.,1.110223024625E-16,0.));-#53 = PCURVE('',#54,#59);-#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#55,#56)- ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),- .PIECEWISE_BEZIER_KNOTS.);-#55 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));-#56 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#57 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));-#58 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);-#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,- 2),(0.,1.318648457444),.PIECEWISE_BEZIER_KNOTS.);-#61 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));-#62 = CARTESIAN_POINT('',(1.41,-3.650222601257E-17));-#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#64 = PCURVE('',#65,#70);-#65 = PLANE('',#66);-#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);-#67 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));-#68 = DIRECTION('',(0.,0.,1.));-#69 = DIRECTION('',(0.436587433964,-0.899661832304,0.));-#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);-#71 = LINE('',#72,#73);-#72 = CARTESIAN_POINT('',(0.,0.));-#73 = VECTOR('',#74,1.);-#74 = DIRECTION('',(0.436587433964,0.899661832304));-#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#76 = ORIENTED_EDGE('',*,*,#77,.T.);-#77 = EDGE_CURVE('',#46,#78,#80,.T.);-#78 = VERTEX_POINT('',#79);-#79 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);-#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,- 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#82 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));-#83 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#84 = PCURVE('',#54,#85);-#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);-#86 = LINE('',#87,#88);-#87 = CARTESIAN_POINT('',(1.41,-7.837603163075E-17));-#88 = VECTOR('',#89,1.);-#89 = DIRECTION('',(0.,1.));-#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#52 = DIRECTION('',(0.436909980015,0.899505235873));+#53 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#91 = PCURVE('',#92,#97);-#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#93,#94)- ,(#95,#96+#54 = ORIENTED_EDGE('',*,*,#55,.T.);+#55 = EDGE_CURVE('',#24,#56,#58,.T.);+#56 = VERTEX_POINT('',#57);+#57 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#58 = SURFACE_CURVE('',#59,(#62,#69),.PCURVE_S1.);+#59 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60,#61),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#60 = CARTESIAN_POINT('',(0.680405353927,1.400810707854,0.1));+#61 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#62 = PCURVE('',#32,#63);+#63 = DEFINITIONAL_REPRESENTATION('',(#64),#68);+#64 = LINE('',#65,#66);+#65 = CARTESIAN_POINT('',(1.41,-9.016706823829E-17));+#66 = VECTOR('',#67,1.);+#67 = DIRECTION('',(0.,1.));+#68 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#69 = PCURVE('',#70,#75);+#70 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#71,#72)+ ,(#73,#74 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#93 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));-#94 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#95 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));-#96 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);-#98 = LINE('',#99,#100);-#99 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));-#100 = VECTOR('',#101,1.);-#101 = DIRECTION('',(-2.801248917812E-16,1.));-#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#103 = ORIENTED_EDGE('',*,*,#104,.F.);-#104 = EDGE_CURVE('',#105,#78,#107,.T.);-#105 = VERTEX_POINT('',#106);-#106 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);-#108 = LINE('',#109,#110);-#109 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#110 = VECTOR('',#111,1.);-#111 = DIRECTION('',(1.,1.110223024625E-16,0.));-#112 = PCURVE('',#54,#113);-#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);-#114 = LINE('',#115,#116);-#115 = CARTESIAN_POINT('',(1.664985591449E-16,1.));-#116 = VECTOR('',#117,1.);-#117 = DIRECTION('',(1.,7.873922160462E-17));-#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#119 = PCURVE('',#120,#125);-#120 = PLANE('',#121);-#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);-#122 = CARTESIAN_POINT('',(-0.705,1.45,0.9));-#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#124 = DIRECTION('',(1.,1.110223024625E-16,0.));-#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);-#126 = LINE('',#127,#128);-#127 = CARTESIAN_POINT('',(0.,-0.15));-#128 = VECTOR('',#129,1.);-#129 = DIRECTION('',(1.,0.));-#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#131 = ORIENTED_EDGE('',*,*,#132,.F.);-#132 = EDGE_CURVE('',#44,#105,#133,.T.);-#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);-#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+#71 = CARTESIAN_POINT('',(0.680405353927,1.400810707854,0.1));+#72 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#73 = CARTESIAN_POINT('',(0.750810707854,1.330405353927,0.1));+#74 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#75 = DEFINITIONAL_REPRESENTATION('',(#76),#80);+#76 = LINE('',#77,#78);+#77 = CARTESIAN_POINT('',(-4.024982009691E-17,-3.326528190151E-17));+#78 = VECTOR('',#79,1.);+#79 = DIRECTION('',(1.047063456038E-17,1.));+#80 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#81 = ORIENTED_EDGE('',*,*,#82,.F.);+#82 = EDGE_CURVE('',#83,#56,#85,.T.);+#83 = VERTEX_POINT('',#84);+#84 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#85 = SURFACE_CURVE('',#86,(#90,#97),.PCURVE_S1.);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(1.,1.110223024625E-16,0.));+#90 = PCURVE('',#32,#91);+#91 = DEFINITIONAL_REPRESENTATION('',(#92),#96);+#92 = LINE('',#93,#94);+#93 = CARTESIAN_POINT('',(8.198236826606E-17,1.));+#94 = VECTOR('',#95,1.);+#95 = DIRECTION('',(1.,0.));+#96 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#97 = PCURVE('',#98,#103);+#98 = PLANE('',#99);+#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102);+#100 = CARTESIAN_POINT('',(-0.705,1.45,0.6));+#101 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#102 = DIRECTION('',(1.,1.110223024625E-16,0.));+#103 = DEFINITIONAL_REPRESENTATION('',(#104),#108);+#104 = LINE('',#105,#106);+#105 = CARTESIAN_POINT('',(0.,-0.15));+#106 = VECTOR('',#107,1.);+#107 = DIRECTION('',(1.,0.));+#108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#109 = ORIENTED_EDGE('',*,*,#110,.F.);+#110 = EDGE_CURVE('',#22,#83,#111,.T.);+#111 = SURFACE_CURVE('',#112,(#115,#122),.PCURVE_S1.);+#112 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#113,#114),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#135 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));-#136 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#137 = PCURVE('',#54,#138);-#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);-#139 = LINE('',#140,#141);-#140 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));-#141 = VECTOR('',#142,1.);-#142 = DIRECTION('',(1.663168722973E-16,1.));-#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#144 = PCURVE('',#145,#150);-#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#146,#147)- ,(#148,#149+#113 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#114 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#115 = PCURVE('',#32,#116);+#116 = DEFINITIONAL_REPRESENTATION('',(#117),#121);+#117 = LINE('',#118,#119);+#118 = CARTESIAN_POINT('',(-6.456413101085E-17,-3.169082947721E-17));+#119 = VECTOR('',#120,1.);+#120 = DIRECTION('',(3.55241968144E-17,1.));+#121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#122 = PCURVE('',#123,#128);+#123 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#124,#125)+ ,(#126,#127 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#146 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));-#147 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#148 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));-#149 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);-#151 = LINE('',#152,#153);-#152 = CARTESIAN_POINT('',(0.134350288425,-6.07217739169E-17));-#153 = VECTOR('',#154,1.);-#154 = DIRECTION('',(3.330669073875E-16,1.));-#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#156 = ADVANCED_FACE('',(#157),#65,.F.);-#157 = FACE_BOUND('',#158,.T.);-#158 = EDGE_LOOP('',(#159,#160,#182,#209,#236,#263,#290,#317));-#159 = ORIENTED_EDGE('',*,*,#43,.T.);+#124 = CARTESIAN_POINT('',(-0.750810707854,1.330405353927,0.1));+#125 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#126 = CARTESIAN_POINT('',(-0.680405353927,1.400810707854,0.1));+#127 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#128 = DEFINITIONAL_REPRESENTATION('',(#129),#133);+#129 = LINE('',#130,#131);+#130 = CARTESIAN_POINT('',(0.134350288425,-6.59404249265E-17));+#131 = VECTOR('',#132,1.);+#132 = DIRECTION('',(-2.775557561563E-17,1.));+#133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#134 = ADVANCED_FACE('',(#135),#43,.F.);+#135 = FACE_BOUND('',#136,.T.);+#136 = EDGE_LOOP('',(#137,#138,#160,#187,#214,#241,#268,#295));+#137 = ORIENTED_EDGE('',*,*,#21,.T.);+#138 = ORIENTED_EDGE('',*,*,#139,.T.);+#139 = EDGE_CURVE('',#24,#140,#142,.T.);+#140 = VERTEX_POINT('',#141);+#141 = CARTESIAN_POINT('',(0.750810707854,1.330405353927,0.1));+#142 = SURFACE_CURVE('',#143,(#147,#154),.PCURVE_S1.);+#143 = LINE('',#144,#145);+#144 = CARTESIAN_POINT('',(0.680405353927,1.400810707854,0.1));+#145 = VECTOR('',#146,1.);+#146 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#147 = PCURVE('',#43,#148);+#148 = DEFINITIONAL_REPRESENTATION('',(#149),#153);+#149 = LINE('',#150,#151);+#150 = CARTESIAN_POINT('',(0.594551779173,1.224056356747));+#151 = VECTOR('',#152,1.);+#152 = DIRECTION('',(0.944988261635,0.327104242362));+#153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#154 = PCURVE('',#70,#155);+#155 = DEFINITIONAL_REPRESENTATION('',(#156),#159);+#156 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157,#158),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,9.956820638724E-02),.PIECEWISE_BEZIER_KNOTS.);+#157 = CARTESIAN_POINT('',(-4.024982009691E-17,-3.326528190151E-17));+#158 = CARTESIAN_POINT('',(0.134350288425,-3.32381768472E-17));+#159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) ); #160 = ORIENTED_EDGE('',*,*,#161,.T.);-#161 = EDGE_CURVE('',#46,#162,#164,.T.);+#161 = EDGE_CURVE('',#140,#162,#164,.T.); #162 = VERTEX_POINT('',#163);-#163 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#163 = CARTESIAN_POINT('',(0.750810707854,-1.330405353927,0.1)); #164 = SURFACE_CURVE('',#165,(#169,#176),.PCURVE_S1.); #165 = LINE('',#166,#167);-#166 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#166 = CARTESIAN_POINT('',(0.750810707854,1.330405353927,0.1)); #167 = VECTOR('',#168,1.);-#168 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#169 = PCURVE('',#65,#170);+#168 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#169 = PCURVE('',#43,#170); #170 = DEFINITIONAL_REPRESENTATION('',(#171),#175); #171 = LINE('',#172,#173);-#172 = CARTESIAN_POINT('',(0.575705346336,1.186337687389));+#172 = CARTESIAN_POINT('',(0.688642565441,1.256625539461)); #173 = VECTOR('',#174,1.);-#174 = DIRECTION('',(0.944870917534,0.32744304726));+#174 = DIRECTION('',(0.899505235873,-0.436909980015)); #175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#176 = PCURVE('',#92,#177);-#177 = DEFINITIONAL_REPRESENTATION('',(#178),#181);-#178 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#179,#180),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);-#179 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));-#180 = CARTESIAN_POINT('',(0.134350288425,-1.442696974105E-17));-#181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#182 = ORIENTED_EDGE('',*,*,#183,.T.);-#183 = EDGE_CURVE('',#162,#184,#186,.T.);-#184 = VERTEX_POINT('',#185);-#185 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));-#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);-#187 = LINE('',#188,#189);-#188 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));-#189 = VECTOR('',#190,1.);-#190 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#191 = PCURVE('',#65,#192);-#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);-#193 = LINE('',#194,#195);-#194 = CARTESIAN_POINT('',(0.641614810774,1.209178474928));-#195 = VECTOR('',#196,1.);-#196 = DIRECTION('',(0.899661832304,-0.436587433964));-#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#198 = PCURVE('',#199,#204);-#199 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#200,#201)- ,(#202,#203+#176 = PCURVE('',#177,#182);+#177 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#178,#179)+ ,(#180,#181 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#200 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));-#201 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#202 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));-#203 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#204 = DEFINITIONAL_REPRESENTATION('',(#205),#208);-#205 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#206,#207),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,2.618648457444),.PIECEWISE_BEZIER_KNOTS.);-#206 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));-#207 = CARTESIAN_POINT('',(2.71,1.356324907117E-17));-#208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#209 = ORIENTED_EDGE('',*,*,#210,.T.);-#210 = EDGE_CURVE('',#184,#211,#213,.T.);-#211 = VERTEX_POINT('',#212);-#212 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));-#213 = SURFACE_CURVE('',#214,(#218,#225),.PCURVE_S1.);-#214 = LINE('',#215,#216);-#215 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));-#216 = VECTOR('',#217,1.);-#217 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#218 = PCURVE('',#65,#219);-#219 = DEFINITIONAL_REPRESENTATION('',(#220),#224);-#220 = LINE('',#221,#222);-#221 = CARTESIAN_POINT('',(2.997512880158,6.590946443822E-02));-#222 = VECTOR('',#223,1.);-#223 = DIRECTION('',(0.32744304726,-0.944870917534));-#224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#225 = PCURVE('',#226,#231);-#226 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#227,#228)- ,(#229,#230+#178 = CARTESIAN_POINT('',(0.750810707854,1.330405353927,0.1));+#179 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#180 = CARTESIAN_POINT('',(0.750810707854,-1.330405353927,0.1));+#181 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#182 = DEFINITIONAL_REPRESENTATION('',(#183),#186);+#183 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#184,#185),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.660810707854),.PIECEWISE_BEZIER_KNOTS.);+#184 = CARTESIAN_POINT('',(-1.186202227649E-17,-7.532053044332E-17));+#185 = CARTESIAN_POINT('',(2.71,3.169091550399E-17));+#186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#187 = ORIENTED_EDGE('',*,*,#188,.T.);+#188 = EDGE_CURVE('',#162,#189,#191,.T.);+#189 = VERTEX_POINT('',#190);+#190 = CARTESIAN_POINT('',(0.680405353927,-1.400810707854,0.1));+#191 = SURFACE_CURVE('',#192,(#196,#203),.PCURVE_S1.);+#192 = LINE('',#193,#194);+#193 = CARTESIAN_POINT('',(0.750810707854,-1.330405353927,0.1));+#194 = VECTOR('',#195,1.);+#195 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#196 = PCURVE('',#43,#197);+#197 = DEFINITIONAL_REPRESENTATION('',(#198),#202);+#198 = LINE('',#199,#200);+#199 = CARTESIAN_POINT('',(3.082055728823,9.409078626818E-02));+#200 = VECTOR('',#201,1.);+#201 = DIRECTION('',(0.327104242362,-0.944988261635));+#202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#203 = PCURVE('',#204,#209);+#204 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#205,#206)+ ,(#207,#208 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#227 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));-#228 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#229 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));-#230 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#231 = DEFINITIONAL_REPRESENTATION('',(#232),#235);-#232 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#233,#234),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);-#233 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));-#234 = CARTESIAN_POINT('',(0.134350288425,-8.488214501621E-17));-#235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#236 = ORIENTED_EDGE('',*,*,#237,.T.);-#237 = EDGE_CURVE('',#211,#238,#240,.T.);-#238 = VERTEX_POINT('',#239);-#239 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));-#240 = SURFACE_CURVE('',#241,(#245,#252),.PCURVE_S1.);-#241 = LINE('',#242,#243);-#242 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));-#243 = VECTOR('',#244,1.);-#244 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#245 = PCURVE('',#65,#246);-#246 = DEFINITIONAL_REPRESENTATION('',(#247),#251);-#247 = LINE('',#248,#249);-#248 = CARTESIAN_POINT('',(3.020353667697,5.397904345728E-13));-#249 = VECTOR('',#250,1.);-#250 = DIRECTION('',(-0.436587433964,-0.899661832304));-#251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#252 = PCURVE('',#253,#258);-#253 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#254,#255)- ,(#256,#257+#205 = CARTESIAN_POINT('',(0.750810707854,-1.330405353927,0.1));+#206 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#207 = CARTESIAN_POINT('',(0.680405353927,-1.400810707854,0.1));+#208 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#209 = DEFINITIONAL_REPRESENTATION('',(#210),#213);+#210 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#211,#212),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,9.956820638724E-02),.PIECEWISE_BEZIER_KNOTS.);+#211 = CARTESIAN_POINT('',(6.486696845055E-17,-6.595397745365E-17));+#212 = CARTESIAN_POINT('',(0.134350288425,-6.59404249265E-17));+#213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#214 = ORIENTED_EDGE('',*,*,#215,.T.);+#215 = EDGE_CURVE('',#189,#216,#218,.T.);+#216 = VERTEX_POINT('',#217);+#217 = CARTESIAN_POINT('',(-0.680405353927,-1.400810707854,0.1));+#218 = SURFACE_CURVE('',#219,(#223,#230),.PCURVE_S1.);+#219 = LINE('',#220,#221);+#220 = CARTESIAN_POINT('',(0.680405353927,-1.400810707854,0.1));+#221 = VECTOR('',#222,1.);+#222 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#223 = PCURVE('',#43,#224);+#224 = DEFINITIONAL_REPRESENTATION('',(#225),#229);+#225 = LINE('',#226,#227);+#226 = CARTESIAN_POINT('',(3.114624911537,1.381117442634E-13));+#227 = VECTOR('',#228,1.);+#228 = DIRECTION('',(-0.436909980015,-0.899505235873));+#229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#230 = PCURVE('',#231,#236);+#231 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#232,#233)+ ,(#234,#235 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#254 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));-#255 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#256 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));-#257 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#258 = DEFINITIONAL_REPRESENTATION('',(#259),#262);-#259 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#260,#261),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,1.318648457444),.PIECEWISE_BEZIER_KNOTS.);-#260 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));-#261 = CARTESIAN_POINT('',(1.41,-3.650222601257E-17));-#262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#263 = ORIENTED_EDGE('',*,*,#264,.T.);-#264 = EDGE_CURVE('',#238,#265,#267,.T.);-#265 = VERTEX_POINT('',#266);-#266 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));-#267 = SURFACE_CURVE('',#268,(#272,#279),.PCURVE_S1.);-#268 = LINE('',#269,#270);-#269 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));-#270 = VECTOR('',#271,1.);-#271 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#272 = PCURVE('',#65,#273);-#273 = DEFINITIONAL_REPRESENTATION('',(#274),#278);-#274 = LINE('',#275,#276);-#275 = CARTESIAN_POINT('',(2.444648321361,-1.186337687388));-#276 = VECTOR('',#277,1.);-#277 = DIRECTION('',(-0.944870917534,-0.32744304726));-#278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#279 = PCURVE('',#280,#285);-#280 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#281,#282)- ,(#283,#284+#232 = CARTESIAN_POINT('',(0.680405353927,-1.400810707854,0.1));+#233 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#234 = CARTESIAN_POINT('',(-0.680405353927,-1.400810707854,0.1));+#235 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#236 = DEFINITIONAL_REPRESENTATION('',(#237),#240);+#237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#238,#239),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.360810707854),.PIECEWISE_BEZIER_KNOTS.);+#238 = CARTESIAN_POINT('',(-6.456413101085E-17,-3.169082947721E-17));+#239 = CARTESIAN_POINT('',(1.41,-1.240142923308E-17));+#240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#241 = ORIENTED_EDGE('',*,*,#242,.T.);+#242 = EDGE_CURVE('',#216,#243,#245,.T.);+#243 = VERTEX_POINT('',#244);+#244 = CARTESIAN_POINT('',(-0.750810707854,-1.330405353927,0.1));+#245 = SURFACE_CURVE('',#246,(#250,#257),.PCURVE_S1.);+#246 = LINE('',#247,#248);+#247 = CARTESIAN_POINT('',(-0.680405353927,-1.400810707854,0.1));+#248 = VECTOR('',#249,1.);+#249 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#250 = PCURVE('',#43,#251);+#251 = DEFINITIONAL_REPRESENTATION('',(#252),#256);+#252 = LINE('',#253,#254);+#253 = CARTESIAN_POINT('',(2.520073132364,-1.224056356747));+#254 = VECTOR('',#255,1.);+#255 = DIRECTION('',(-0.944988261635,-0.327104242362));+#256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#257 = PCURVE('',#258,#263);+#258 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#259,#260)+ ,(#261,#262 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#281 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));-#282 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#283 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));-#284 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#285 = DEFINITIONAL_REPRESENTATION('',(#286),#289);-#286 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#287,#288),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);-#287 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));-#288 = CARTESIAN_POINT('',(0.134350288425,-1.442696974105E-17));-#289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#290 = ORIENTED_EDGE('',*,*,#291,.T.);-#291 = EDGE_CURVE('',#265,#292,#294,.T.);-#292 = VERTEX_POINT('',#293);-#293 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));-#294 = SURFACE_CURVE('',#295,(#299,#306),.PCURVE_S1.);-#295 = LINE('',#296,#297);-#296 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));-#297 = VECTOR('',#298,1.);-#298 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#299 = PCURVE('',#65,#300);-#300 = DEFINITIONAL_REPRESENTATION('',(#301),#305);-#301 = LINE('',#302,#303);-#302 = CARTESIAN_POINT('',(2.378738856923,-1.209178474927));-#303 = VECTOR('',#304,1.);-#304 = DIRECTION('',(-0.899661832304,0.436587433964));-#305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#306 = PCURVE('',#307,#312);-#307 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#308,#309)- ,(#310,#311+#259 = CARTESIAN_POINT('',(-0.680405353927,-1.400810707854,0.1));+#260 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#261 = CARTESIAN_POINT('',(-0.750810707854,-1.330405353927,0.1));+#262 = CARTESIAN_POINT('',(-0.8,-1.355,0.45));+#263 = DEFINITIONAL_REPRESENTATION('',(#264),#267);+#264 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#265,#266),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,9.956820638724E-02),.PIECEWISE_BEZIER_KNOTS.);+#265 = CARTESIAN_POINT('',(-4.024982009691E-17,-3.326528190151E-17));+#266 = CARTESIAN_POINT('',(0.134350288425,-3.32381768472E-17));+#267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#268 = ORIENTED_EDGE('',*,*,#269,.T.);+#269 = EDGE_CURVE('',#243,#270,#272,.T.);+#270 = VERTEX_POINT('',#271);+#271 = CARTESIAN_POINT('',(-0.750810707854,1.330405353927,0.1));+#272 = SURFACE_CURVE('',#273,(#277,#284),.PCURVE_S1.);+#273 = LINE('',#274,#275);+#274 = CARTESIAN_POINT('',(-0.750810707854,-1.330405353927,0.1));+#275 = VECTOR('',#276,1.);+#276 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#277 = PCURVE('',#43,#278);+#278 = DEFINITIONAL_REPRESENTATION('',(#279),#283);+#279 = LINE('',#280,#281);+#280 = CARTESIAN_POINT('',(2.425982346096,-1.25662553946));+#281 = VECTOR('',#282,1.);+#282 = DIRECTION('',(-0.899505235873,0.436909980015));+#283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#284 = PCURVE('',#285,#290);+#285 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#286,#287)+ ,(#288,#289 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#308 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));-#309 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#310 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));-#311 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#312 = DEFINITIONAL_REPRESENTATION('',(#313),#316);-#313 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#314,#315),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,2.618648457444),.PIECEWISE_BEZIER_KNOTS.);-#314 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));-#315 = CARTESIAN_POINT('',(2.71,1.356324907117E-17));-#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#317 = ORIENTED_EDGE('',*,*,#318,.T.);-#318 = EDGE_CURVE('',#292,#44,#319,.T.);-#319 = SURFACE_CURVE('',#320,(#324,#331),.PCURVE_S1.);-#320 = LINE('',#321,#322);-#321 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));-#322 = VECTOR('',#323,1.);-#323 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#324 = PCURVE('',#65,#325);-#325 = DEFINITIONAL_REPRESENTATION('',(#326),#330);-#326 = LINE('',#327,#328);-#327 = CARTESIAN_POINT('',(2.284078753856E-02,-6.590946443768E-02));-#328 = VECTOR('',#329,1.);-#329 = DIRECTION('',(-0.32744304726,0.944870917534));-#330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#331 = PCURVE('',#145,#332);-#332 = DEFINITIONAL_REPRESENTATION('',(#333),#336);-#333 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#334,#335),.UNSPECIFIED.,.F.,.F.,- (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);-#334 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));-#335 = CARTESIAN_POINT('',(0.134350288425,-8.488214501621E-17));-#336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#337 = ADVANCED_FACE('',(#338),#92,.F.);-#338 = FACE_BOUND('',#339,.F.);-#339 = EDGE_LOOP('',(#340,#341,#363,#389));-#340 = ORIENTED_EDGE('',*,*,#161,.T.);-#341 = ORIENTED_EDGE('',*,*,#342,.T.);-#342 = EDGE_CURVE('',#162,#343,#345,.T.);-#343 = VERTEX_POINT('',#344);-#344 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#345 = SURFACE_CURVE('',#346,(#349,#356),.PCURVE_S1.);-#346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#347,#348),.UNSPECIFIED.,.F.,.F.,+#286 = CARTESIAN_POINT('',(-0.750810707854,-1.330405353927,0.1));+#287 = CARTESIAN_POINT('',(-0.8,-1.355,0.45));+#288 = CARTESIAN_POINT('',(-0.750810707854,1.330405353927,0.1));+#289 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#290 = DEFINITIONAL_REPRESENTATION('',(#291),#294);+#291 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#292,#293),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.660810707854),.PIECEWISE_BEZIER_KNOTS.);+#292 = CARTESIAN_POINT('',(-1.186202227649E-17,-7.532053044332E-17));+#293 = CARTESIAN_POINT('',(2.71,3.169091550399E-17));+#294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#295 = ORIENTED_EDGE('',*,*,#296,.T.);+#296 = EDGE_CURVE('',#270,#22,#297,.T.);+#297 = SURFACE_CURVE('',#298,(#302,#309),.PCURVE_S1.);+#298 = LINE('',#299,#300);+#299 = CARTESIAN_POINT('',(-0.750810707854,1.330405353927,0.1));+#300 = VECTOR('',#301,1.);+#301 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#302 = PCURVE('',#43,#303);+#303 = DEFINITIONAL_REPRESENTATION('',(#304),#308);+#304 = LINE('',#305,#306);+#305 = CARTESIAN_POINT('',(3.256918271364E-02,-9.409078626804E-02));+#306 = VECTOR('',#307,1.);+#307 = DIRECTION('',(-0.327104242362,0.944988261635));+#308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#309 = PCURVE('',#123,#310);+#310 = DEFINITIONAL_REPRESENTATION('',(#311),#314);+#311 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#312,#313),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,9.956820638724E-02),.PIECEWISE_BEZIER_KNOTS.);+#312 = CARTESIAN_POINT('',(6.486696845055E-17,-6.595397745365E-17));+#313 = CARTESIAN_POINT('',(0.134350288425,-6.59404249265E-17));+#314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#315 = ADVANCED_FACE('',(#316),#70,.F.);+#316 = FACE_BOUND('',#317,.F.);+#317 = EDGE_LOOP('',(#318,#319,#341,#367));+#318 = ORIENTED_EDGE('',*,*,#139,.T.);+#319 = ORIENTED_EDGE('',*,*,#320,.T.);+#320 = EDGE_CURVE('',#140,#321,#323,.T.);+#321 = VERTEX_POINT('',#322);+#322 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#323 = SURFACE_CURVE('',#324,(#327,#334),.PCURVE_S1.);+#324 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#325,#326),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#347 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));-#348 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#349 = PCURVE('',#92,#350);-#350 = DEFINITIONAL_REPRESENTATION('',(#351),#355);-#351 = LINE('',#352,#353);-#352 = CARTESIAN_POINT('',(0.134350288425,-5.619963771465E-17));-#353 = VECTOR('',#354,1.);-#354 = DIRECTION('',(-2.498001805407E-16,1.));-#355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#356 = PCURVE('',#199,#357);-#357 = DEFINITIONAL_REPRESENTATION('',(#358),#362);-#358 = LINE('',#359,#360);-#359 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));-#360 = VECTOR('',#361,1.);-#361 = DIRECTION('',(3.83337513339E-16,1.));-#362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#363 = ORIENTED_EDGE('',*,*,#364,.F.);-#364 = EDGE_CURVE('',#78,#343,#365,.T.);-#365 = SURFACE_CURVE('',#366,(#370,#377),.PCURVE_S1.);-#366 = LINE('',#367,#368);-#367 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#368 = VECTOR('',#369,1.);-#369 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#370 = PCURVE('',#92,#371);-#371 = DEFINITIONAL_REPRESENTATION('',(#372),#376);-#372 = LINE('',#373,#374);-#373 = CARTESIAN_POINT('',(-1.880156086189E-16,1.));-#374 = VECTOR('',#375,1.);-#375 = DIRECTION('',(1.,0.));-#376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#377 = PCURVE('',#378,#383);-#378 = PLANE('',#379);-#379 = AXIS2_PLACEMENT_3D('',#380,#381,#382);-#380 = CARTESIAN_POINT('',(0.705,1.45,0.9));-#381 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#382 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);-#384 = LINE('',#385,#386);-#385 = CARTESIAN_POINT('',(0.,-0.15));-#386 = VECTOR('',#387,1.);-#387 = DIRECTION('',(1.,0.));-#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#389 = ORIENTED_EDGE('',*,*,#77,.F.);-#390 = ADVANCED_FACE('',(#391),#120,.F.);-#391 = FACE_BOUND('',#392,.F.);-#392 = EDGE_LOOP('',(#393,#394,#414,#442));-#393 = ORIENTED_EDGE('',*,*,#104,.T.);-#394 = ORIENTED_EDGE('',*,*,#395,.T.);-#395 = EDGE_CURVE('',#78,#396,#398,.T.);-#396 = VERTEX_POINT('',#397);-#397 = CARTESIAN_POINT('',(0.705,1.45,0.9));-#398 = SURFACE_CURVE('',#399,(#402,#408),.PCURVE_S1.);-#399 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#400,#401),.UNSPECIFIED.,.F.,.F.,+#325 = CARTESIAN_POINT('',(0.750810707854,1.330405353927,0.1));+#326 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#327 = PCURVE('',#70,#328);+#328 = DEFINITIONAL_REPRESENTATION('',(#329),#333);+#329 = LINE('',#330,#331);+#330 = CARTESIAN_POINT('',(0.134350288425,-1.108159887982E-16));+#331 = VECTOR('',#332,1.);+#332 = DIRECTION('',(-1.665334536938E-16,1.));+#333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#334 = PCURVE('',#177,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(-1.186202227649E-17,-7.532053044332E-17));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(4.723672666789E-17,1.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#341 = ORIENTED_EDGE('',*,*,#342,.F.);+#342 = EDGE_CURVE('',#56,#321,#343,.T.);+#343 = SURFACE_CURVE('',#344,(#348,#355),.PCURVE_S1.);+#344 = LINE('',#345,#346);+#345 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#346 = VECTOR('',#347,1.);+#347 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#348 = PCURVE('',#70,#349);+#349 = DEFINITIONAL_REPRESENTATION('',(#350),#354);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-1.879261029204E-16,1.));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(1.,0.));+#354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#355 = PCURVE('',#356,#361);+#356 = PLANE('',#357);+#357 = AXIS2_PLACEMENT_3D('',#358,#359,#360);+#358 = CARTESIAN_POINT('',(0.705,1.45,0.6));+#359 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#360 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,-0.15));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = ORIENTED_EDGE('',*,*,#55,.F.);+#368 = ADVANCED_FACE('',(#369),#98,.F.);+#369 = FACE_BOUND('',#370,.F.);+#370 = EDGE_LOOP('',(#371,#372,#392,#420));+#371 = ORIENTED_EDGE('',*,*,#82,.T.);+#372 = ORIENTED_EDGE('',*,*,#373,.T.);+#373 = EDGE_CURVE('',#56,#374,#376,.T.);+#374 = VERTEX_POINT('',#375);+#375 = CARTESIAN_POINT('',(0.705,1.45,0.6));+#376 = SURFACE_CURVE('',#377,(#380,#386),.PCURVE_S1.);+#377 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#378,#379),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#400 = CARTESIAN_POINT('',(0.705,1.45,0.75));-#401 = CARTESIAN_POINT('',(0.705,1.45,0.9));-#402 = PCURVE('',#120,#403);-#403 = DEFINITIONAL_REPRESENTATION('',(#404),#407);-#404 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#405,#406),.UNSPECIFIED.,.F.,.F.,+#378 = CARTESIAN_POINT('',(0.705,1.45,0.45));+#379 = CARTESIAN_POINT('',(0.705,1.45,0.6));+#380 = PCURVE('',#98,#381);+#381 = DEFINITIONAL_REPRESENTATION('',(#382),#385);+#382 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#383,#384),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#405 = CARTESIAN_POINT('',(1.41,-0.15));-#406 = CARTESIAN_POINT('',(1.41,0.));-#407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#383 = CARTESIAN_POINT('',(1.41,-0.15));+#384 = CARTESIAN_POINT('',(1.41,0.));+#385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#408 = PCURVE('',#378,#409);-#409 = DEFINITIONAL_REPRESENTATION('',(#410),#413);-#410 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#411,#412),.UNSPECIFIED.,.F.,.F.,+#386 = PCURVE('',#356,#387);+#387 = DEFINITIONAL_REPRESENTATION('',(#388),#391);+#388 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#389,#390),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#411 = CARTESIAN_POINT('',(0.,-0.15));-#412 = CARTESIAN_POINT('',(0.,0.));-#413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#414 = ORIENTED_EDGE('',*,*,#415,.F.);-#415 = EDGE_CURVE('',#416,#396,#418,.T.);-#416 = VERTEX_POINT('',#417);-#417 = CARTESIAN_POINT('',(-0.705,1.45,0.9));-#418 = SURFACE_CURVE('',#419,(#423,#430),.PCURVE_S1.);-#419 = LINE('',#420,#421);-#420 = CARTESIAN_POINT('',(-0.705,1.45,0.9));-#421 = VECTOR('',#422,1.);-#422 = DIRECTION('',(1.,1.110223024625E-16,0.));-#423 = PCURVE('',#120,#424);-#424 = DEFINITIONAL_REPRESENTATION('',(#425),#429);-#425 = LINE('',#426,#427);-#426 = CARTESIAN_POINT('',(0.,0.));-#427 = VECTOR('',#428,1.);-#428 = DIRECTION('',(1.,0.));-#429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#430 = PCURVE('',#431,#436);-#431 = PLANE('',#432);-#432 = AXIS2_PLACEMENT_3D('',#433,#434,#435);-#433 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));-#434 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));-#435 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));-#436 = DEFINITIONAL_REPRESENTATION('',(#437),#441);-#437 = LINE('',#438,#439);-#438 = CARTESIAN_POINT('',(-0.705,-1.25E-02));-#439 = VECTOR('',#440,1.);-#440 = DIRECTION('',(1.,4.08998344385E-17));-#441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#442 = ORIENTED_EDGE('',*,*,#443,.F.);-#443 = EDGE_CURVE('',#105,#416,#444,.T.);-#444 = SURFACE_CURVE('',#445,(#448,#454),.PCURVE_S1.);-#445 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#446,#447),.UNSPECIFIED.,.F.,.F.,+#389 = CARTESIAN_POINT('',(0.,-0.15));+#390 = CARTESIAN_POINT('',(0.,0.));+#391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#392 = ORIENTED_EDGE('',*,*,#393,.F.);+#393 = EDGE_CURVE('',#394,#374,#396,.T.);+#394 = VERTEX_POINT('',#395);+#395 = CARTESIAN_POINT('',(-0.705,1.45,0.6));+#396 = SURFACE_CURVE('',#397,(#401,#408),.PCURVE_S1.);+#397 = LINE('',#398,#399);+#398 = CARTESIAN_POINT('',(-0.705,1.45,0.6));+#399 = VECTOR('',#400,1.);+#400 = DIRECTION('',(1.,1.110223024625E-16,0.));+#401 = PCURVE('',#98,#402);+#402 = DEFINITIONAL_REPRESENTATION('',(#403),#407);+#403 = LINE('',#404,#405);+#404 = CARTESIAN_POINT('',(0.,0.));+#405 = VECTOR('',#406,1.);+#406 = DIRECTION('',(1.,0.));+#407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#408 = PCURVE('',#409,#414);+#409 = PLANE('',#410);+#410 = AXIS2_PLACEMENT_3D('',#411,#412,#413);+#411 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.6));+#412 = DIRECTION('',(2.888762391192E-17,8.634073551009E-28,-1.));+#413 = DIRECTION('',(1.,1.51922136901E-16,2.888762391192E-17));+#414 = DEFINITIONAL_REPRESENTATION('',(#415),#419);+#415 = LINE('',#416,#417);+#416 = CARTESIAN_POINT('',(-0.705,-1.25E-02));+#417 = VECTOR('',#418,1.);+#418 = DIRECTION('',(1.,4.08998344385E-17));+#419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#420 = ORIENTED_EDGE('',*,*,#421,.F.);+#421 = EDGE_CURVE('',#83,#394,#422,.T.);+#422 = SURFACE_CURVE('',#423,(#426,#432),.PCURVE_S1.);+#423 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#424,#425),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#446 = CARTESIAN_POINT('',(-0.705,1.45,0.75));-#447 = CARTESIAN_POINT('',(-0.705,1.45,0.9));-#448 = PCURVE('',#120,#449);-#449 = DEFINITIONAL_REPRESENTATION('',(#450),#453);-#450 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#451,#452),.UNSPECIFIED.,.F.,.F.,+#424 = CARTESIAN_POINT('',(-0.705,1.45,0.45));+#425 = CARTESIAN_POINT('',(-0.705,1.45,0.6));+#426 = PCURVE('',#98,#427);+#427 = DEFINITIONAL_REPRESENTATION('',(#428),#431);+#428 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#429,#430),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#451 = CARTESIAN_POINT('',(0.,-0.15));-#452 = CARTESIAN_POINT('',(0.,0.));-#453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#454 = PCURVE('',#455,#460);-#455 = PLANE('',#456);-#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459);-#457 = CARTESIAN_POINT('',(-0.8,1.355,0.9));-#458 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#459 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#460 = DEFINITIONAL_REPRESENTATION('',(#461),#464);-#461 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#462,#463),.UNSPECIFIED.,.F.,.F.,+#429 = CARTESIAN_POINT('',(0.,-0.15));+#430 = CARTESIAN_POINT('',(0.,0.));+#431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#432 = PCURVE('',#433,#438);+#433 = PLANE('',#434);+#434 = AXIS2_PLACEMENT_3D('',#435,#436,#437);+#435 = CARTESIAN_POINT('',(-0.8,1.355,0.6));+#436 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#437 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#438 = DEFINITIONAL_REPRESENTATION('',(#439),#442);+#439 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#440,#441),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#462 = CARTESIAN_POINT('',(0.134350288425,-0.15));-#463 = CARTESIAN_POINT('',(0.134350288425,0.));-#464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#465 = ADVANCED_FACE('',(#466),#145,.F.);-#466 = FACE_BOUND('',#467,.F.);-#467 = EDGE_LOOP('',(#468,#469,#470,#493));-#468 = ORIENTED_EDGE('',*,*,#318,.T.);-#469 = ORIENTED_EDGE('',*,*,#132,.T.);-#470 = ORIENTED_EDGE('',*,*,#471,.F.);-#471 = EDGE_CURVE('',#472,#105,#474,.T.);-#472 = VERTEX_POINT('',#473);-#473 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#474 = SURFACE_CURVE('',#475,(#479,#486),.PCURVE_S1.);-#475 = LINE('',#476,#477);-#476 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#477 = VECTOR('',#478,1.);-#478 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#479 = PCURVE('',#145,#480);-#480 = DEFINITIONAL_REPRESENTATION('',(#481),#485);-#481 = LINE('',#482,#483);-#482 = CARTESIAN_POINT('',(-2.980584140513E-17,1.));-#483 = VECTOR('',#484,1.);-#484 = DIRECTION('',(1.,0.));-#485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#486 = PCURVE('',#455,#487);-#487 = DEFINITIONAL_REPRESENTATION('',(#488),#492);-#488 = LINE('',#489,#490);-#489 = CARTESIAN_POINT('',(0.,-0.15));-#490 = VECTOR('',#491,1.);-#491 = DIRECTION('',(1.,0.));-#492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#493 = ORIENTED_EDGE('',*,*,#494,.F.);-#494 = EDGE_CURVE('',#292,#472,#495,.T.);-#495 = SURFACE_CURVE('',#496,(#499,#506),.PCURVE_S1.);-#496 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#497,#498),.UNSPECIFIED.,.F.,.F.,+#440 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#441 = CARTESIAN_POINT('',(0.134350288425,0.));+#442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#443 = ADVANCED_FACE('',(#444),#123,.F.);+#444 = FACE_BOUND('',#445,.F.);+#445 = EDGE_LOOP('',(#446,#447,#448,#471));+#446 = ORIENTED_EDGE('',*,*,#296,.T.);+#447 = ORIENTED_EDGE('',*,*,#110,.T.);+#448 = ORIENTED_EDGE('',*,*,#449,.F.);+#449 = EDGE_CURVE('',#450,#83,#452,.T.);+#450 = VERTEX_POINT('',#451);+#451 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#452 = SURFACE_CURVE('',#453,(#457,#464),.PCURVE_S1.);+#453 = LINE('',#454,#455);+#454 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#455 = VECTOR('',#456,1.);+#456 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#457 = PCURVE('',#123,#458);+#458 = DEFINITIONAL_REPRESENTATION('',(#459),#463);+#459 = LINE('',#460,#461);+#460 = CARTESIAN_POINT('',(4.776915883756E-17,1.));+#461 = VECTOR('',#462,1.);+#462 = DIRECTION('',(1.,0.));+#463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#464 = PCURVE('',#433,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,-0.15));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#471 = ORIENTED_EDGE('',*,*,#472,.F.);+#472 = EDGE_CURVE('',#270,#450,#473,.T.);+#473 = SURFACE_CURVE('',#474,(#477,#484),.PCURVE_S1.);+#474 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#475,#476),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#497 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));-#498 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#499 = PCURVE('',#145,#500);-#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#475 = CARTESIAN_POINT('',(-0.750810707854,1.330405353927,0.1));+#476 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#477 = PCURVE('',#123,#478);+#478 = DEFINITIONAL_REPRESENTATION('',(#479),#483);+#479 = LINE('',#480,#481);+#480 = CARTESIAN_POINT('',(6.486696845055E-17,-6.595397745365E-17));+#481 = VECTOR('',#482,1.);+#482 = DIRECTION('',(-9.773191460854E-17,1.));+#483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#484 = PCURVE('',#285,#485);+#485 = DEFINITIONAL_REPRESENTATION('',(#486),#490);+#486 = LINE('',#487,#488);+#487 = CARTESIAN_POINT('',(2.71,-1.675573537744E-16));+#488 = VECTOR('',#489,1.);+#489 = DIRECTION('',(0.,1.));+#490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#491 = ADVANCED_FACE('',(#492),#285,.F.);+#492 = FACE_BOUND('',#493,.F.);+#493 = EDGE_LOOP('',(#494,#495,#496,#524,#552,#580,#608,#636,#664,#692)+ );+#494 = ORIENTED_EDGE('',*,*,#269,.T.);+#495 = ORIENTED_EDGE('',*,*,#472,.T.);+#496 = ORIENTED_EDGE('',*,*,#497,.F.);+#497 = EDGE_CURVE('',#498,#450,#500,.T.);+#498 = VERTEX_POINT('',#499);+#499 = CARTESIAN_POINT('',(-0.8,1.125,0.45));+#500 = SURFACE_CURVE('',#501,(#505,#512),.PCURVE_S1.); #501 = LINE('',#502,#503);-#502 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));+#502 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #503 = VECTOR('',#504,1.);-#504 = DIRECTION('',(4.118507024083E-16,1.));-#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#506 = PCURVE('',#307,#507);-#507 = DEFINITIONAL_REPRESENTATION('',(#508),#512);-#508 = LINE('',#509,#510);-#509 = CARTESIAN_POINT('',(2.71,-4.77063817192E-18));-#510 = VECTOR('',#511,1.);-#511 = DIRECTION('',(-4.440892098501E-16,1.));-#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#513 = ADVANCED_FACE('',(#514),#307,.F.);-#514 = FACE_BOUND('',#515,.F.);-#515 = EDGE_LOOP('',(#516,#517,#518,#546,#574,#602,#630,#658,#686,#714)- );-#516 = ORIENTED_EDGE('',*,*,#291,.T.);-#517 = ORIENTED_EDGE('',*,*,#494,.T.);-#518 = ORIENTED_EDGE('',*,*,#519,.F.);-#519 = EDGE_CURVE('',#520,#472,#522,.T.);-#520 = VERTEX_POINT('',#521);-#521 = CARTESIAN_POINT('',(-0.8,1.2,0.75));-#522 = SURFACE_CURVE('',#523,(#527,#534),.PCURVE_S1.);-#523 = LINE('',#524,#525);-#524 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#525 = VECTOR('',#526,1.);-#526 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#527 = PCURVE('',#307,#528);-#528 = DEFINITIONAL_REPRESENTATION('',(#529),#533);+#504 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#505 = PCURVE('',#285,#506);+#506 = DEFINITIONAL_REPRESENTATION('',(#507),#511);+#507 = LINE('',#508,#509);+#508 = CARTESIAN_POINT('',(0.,1.));+#509 = VECTOR('',#510,1.);+#510 = DIRECTION('',(1.,0.));+#511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#512 = PCURVE('',#513,#518);+#513 = PLANE('',#514);+#514 = AXIS2_PLACEMENT_3D('',#515,#516,#517);+#515 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#516 = DIRECTION('',(1.,1.110223024625E-16,0.));+#517 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#518 = DEFINITIONAL_REPRESENTATION('',(#519),#523);+#519 = LINE('',#520,#521);+#520 = CARTESIAN_POINT('',(0.,-0.15));+#521 = VECTOR('',#522,1.);+#522 = DIRECTION('',(1.,0.));+#523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#524 = ORIENTED_EDGE('',*,*,#525,.F.);+#525 = EDGE_CURVE('',#526,#498,#528,.T.);+#526 = VERTEX_POINT('',#527);+#527 = CARTESIAN_POINT('',(-0.8,0.775,0.45));+#528 = SURFACE_CURVE('',#529,(#533,#540),.PCURVE_S1.); #529 = LINE('',#530,#531);-#530 = CARTESIAN_POINT('',(0.,1.));+#530 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #531 = VECTOR('',#532,1.);-#532 = DIRECTION('',(1.,0.));-#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#534 = PCURVE('',#535,#540);-#535 = PLANE('',#536);-#536 = AXIS2_PLACEMENT_3D('',#537,#538,#539);-#537 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#538 = DIRECTION('',(1.,1.110223024625E-16,0.));-#539 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#540 = DEFINITIONAL_REPRESENTATION('',(#541),#545);-#541 = LINE('',#542,#543);-#542 = CARTESIAN_POINT('',(0.,-0.15));-#543 = VECTOR('',#544,1.);-#544 = DIRECTION('',(1.,0.));-#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#546 = ORIENTED_EDGE('',*,*,#547,.F.);-#547 = EDGE_CURVE('',#548,#520,#550,.T.);-#548 = VERTEX_POINT('',#549);-#549 = CARTESIAN_POINT('',(-0.8,0.7,0.75));-#550 = SURFACE_CURVE('',#551,(#555,#562),.PCURVE_S1.);-#551 = LINE('',#552,#553);-#552 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#553 = VECTOR('',#554,1.);-#554 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#555 = PCURVE('',#307,#556);-#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#532 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#533 = PCURVE('',#285,#534);+#534 = DEFINITIONAL_REPRESENTATION('',(#535),#539);+#535 = LINE('',#536,#537);+#536 = CARTESIAN_POINT('',(0.,1.));+#537 = VECTOR('',#538,1.);+#538 = DIRECTION('',(1.,-6.344131569287E-16));+#539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#540 = PCURVE('',#541,#546);+#541 = PLANE('',#542);+#542 = AXIS2_PLACEMENT_3D('',#543,#544,#545);+#543 = CARTESIAN_POINT('',(-0.75,0.775,0.45));+#544 = DIRECTION('',(0.,0.,1.));+#545 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#546 = DEFINITIONAL_REPRESENTATION('',(#547),#551);+#547 = LINE('',#548,#549);+#548 = CARTESIAN_POINT('',(5.E-02,2.13));+#549 = VECTOR('',#550,1.);+#550 = DIRECTION('',(1.224646799147E-16,-1.));+#551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#552 = ORIENTED_EDGE('',*,*,#553,.F.);+#553 = EDGE_CURVE('',#554,#526,#556,.T.);+#554 = VERTEX_POINT('',#555);+#555 = CARTESIAN_POINT('',(-0.8,0.175,0.45));+#556 = SURFACE_CURVE('',#557,(#561,#568),.PCURVE_S1.); #557 = LINE('',#558,#559);-#558 = CARTESIAN_POINT('',(0.,1.));+#558 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #559 = VECTOR('',#560,1.);-#560 = DIRECTION('',(1.,0.));-#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#562 = PCURVE('',#563,#568);-#563 = PLANE('',#564);-#564 = AXIS2_PLACEMENT_3D('',#565,#566,#567);-#565 = CARTESIAN_POINT('',(-0.75,0.7,0.75));-#566 = DIRECTION('',(0.,0.,1.));-#567 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#568 = DEFINITIONAL_REPRESENTATION('',(#569),#573);-#569 = LINE('',#570,#571);-#570 = CARTESIAN_POINT('',(5.E-02,2.055));-#571 = VECTOR('',#572,1.);-#572 = DIRECTION('',(1.224646799147E-16,-1.));-#573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#574 = ORIENTED_EDGE('',*,*,#575,.F.);-#575 = EDGE_CURVE('',#576,#548,#578,.T.);-#576 = VERTEX_POINT('',#577);-#577 = CARTESIAN_POINT('',(-0.8,0.25,0.75));-#578 = SURFACE_CURVE('',#579,(#583,#590),.PCURVE_S1.);-#579 = LINE('',#580,#581);-#580 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#581 = VECTOR('',#582,1.);-#582 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#583 = PCURVE('',#307,#584);-#584 = DEFINITIONAL_REPRESENTATION('',(#585),#589);+#560 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#561 = PCURVE('',#285,#562);+#562 = DEFINITIONAL_REPRESENTATION('',(#563),#567);+#563 = LINE('',#564,#565);+#564 = CARTESIAN_POINT('',(0.,1.));+#565 = VECTOR('',#566,1.);+#566 = DIRECTION('',(1.,-3.700743415417E-16));+#567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#568 = PCURVE('',#569,#574);+#569 = PLANE('',#570);+#570 = AXIS2_PLACEMENT_3D('',#571,#572,#573);+#571 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#572 = DIRECTION('',(1.,1.110223024625E-16,0.));+#573 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#579);+#575 = LINE('',#576,#577);+#576 = CARTESIAN_POINT('',(0.,-0.15));+#577 = VECTOR('',#578,1.);+#578 = DIRECTION('',(1.,0.));+#579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#580 = ORIENTED_EDGE('',*,*,#581,.F.);+#581 = EDGE_CURVE('',#582,#554,#584,.T.);+#582 = VERTEX_POINT('',#583);+#583 = CARTESIAN_POINT('',(-0.8,-0.175,0.45));+#584 = SURFACE_CURVE('',#585,(#589,#596),.PCURVE_S1.); #585 = LINE('',#586,#587);-#586 = CARTESIAN_POINT('',(0.,1.));+#586 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #587 = VECTOR('',#588,1.);-#588 = DIRECTION('',(1.,0.));-#589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#590 = PCURVE('',#591,#596);-#591 = PLANE('',#592);-#592 = AXIS2_PLACEMENT_3D('',#593,#594,#595);-#593 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#594 = DIRECTION('',(1.,1.110223024625E-16,0.));-#595 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#596 = DEFINITIONAL_REPRESENTATION('',(#597),#601);-#597 = LINE('',#598,#599);-#598 = CARTESIAN_POINT('',(0.,-0.15));-#599 = VECTOR('',#600,1.);-#600 = DIRECTION('',(1.,0.));-#601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#602 = ORIENTED_EDGE('',*,*,#603,.F.);-#603 = EDGE_CURVE('',#604,#576,#606,.T.);-#604 = VERTEX_POINT('',#605);-#605 = CARTESIAN_POINT('',(-0.8,-0.25,0.75));-#606 = SURFACE_CURVE('',#607,(#611,#618),.PCURVE_S1.);-#607 = LINE('',#608,#609);-#608 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#609 = VECTOR('',#610,1.);-#610 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#611 = PCURVE('',#307,#612);-#612 = DEFINITIONAL_REPRESENTATION('',(#613),#617);+#588 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#589 = PCURVE('',#285,#590);+#590 = DEFINITIONAL_REPRESENTATION('',(#591),#595);+#591 = LINE('',#592,#593);+#592 = CARTESIAN_POINT('',(0.,1.));+#593 = VECTOR('',#594,1.);+#594 = DIRECTION('',(1.,0.));+#595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#596 = PCURVE('',#597,#602);+#597 = PLANE('',#598);+#598 = AXIS2_PLACEMENT_3D('',#599,#600,#601);+#599 = CARTESIAN_POINT('',(-0.75,-0.175,0.45));+#600 = DIRECTION('',(0.,0.,1.));+#601 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#602 = DEFINITIONAL_REPRESENTATION('',(#603),#607);+#603 = LINE('',#604,#605);+#604 = CARTESIAN_POINT('',(5.E-02,1.18));+#605 = VECTOR('',#606,1.);+#606 = DIRECTION('',(1.224646799147E-16,-1.));+#607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#608 = ORIENTED_EDGE('',*,*,#609,.F.);+#609 = EDGE_CURVE('',#610,#582,#612,.T.);+#610 = VERTEX_POINT('',#611);+#611 = CARTESIAN_POINT('',(-0.8,-0.775,0.45));+#612 = SURFACE_CURVE('',#613,(#617,#624),.PCURVE_S1.); #613 = LINE('',#614,#615);-#614 = CARTESIAN_POINT('',(0.,1.));+#614 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #615 = VECTOR('',#616,1.);-#616 = DIRECTION('',(1.,2.22044604925E-16));-#617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#618 = PCURVE('',#619,#624);-#619 = PLANE('',#620);-#620 = AXIS2_PLACEMENT_3D('',#621,#622,#623);-#621 = CARTESIAN_POINT('',(-0.75,-0.25,0.75));-#622 = DIRECTION('',(0.,0.,1.));-#623 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#624 = DEFINITIONAL_REPRESENTATION('',(#625),#629);-#625 = LINE('',#626,#627);-#626 = CARTESIAN_POINT('',(5.E-02,1.105));-#627 = VECTOR('',#628,1.);-#628 = DIRECTION('',(1.224646799147E-16,-1.));-#629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#630 = ORIENTED_EDGE('',*,*,#631,.F.);-#631 = EDGE_CURVE('',#632,#604,#634,.T.);-#632 = VERTEX_POINT('',#633);-#633 = CARTESIAN_POINT('',(-0.8,-0.7,0.75));-#634 = SURFACE_CURVE('',#635,(#639,#646),.PCURVE_S1.);-#635 = LINE('',#636,#637);-#636 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#637 = VECTOR('',#638,1.);-#638 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#639 = PCURVE('',#307,#640);-#640 = DEFINITIONAL_REPRESENTATION('',(#641),#645);+#616 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#617 = PCURVE('',#285,#618);+#618 = DEFINITIONAL_REPRESENTATION('',(#619),#623);+#619 = LINE('',#620,#621);+#620 = CARTESIAN_POINT('',(0.,1.));+#621 = VECTOR('',#622,1.);+#622 = DIRECTION('',(1.,0.));+#623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#624 = PCURVE('',#625,#630);+#625 = PLANE('',#626);+#626 = AXIS2_PLACEMENT_3D('',#627,#628,#629);+#627 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#628 = DIRECTION('',(1.,1.110223024625E-16,0.));+#629 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#635);+#631 = LINE('',#632,#633);+#632 = CARTESIAN_POINT('',(0.,-0.15));+#633 = VECTOR('',#634,1.);+#634 = DIRECTION('',(1.,0.));+#635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#636 = ORIENTED_EDGE('',*,*,#637,.F.);+#637 = EDGE_CURVE('',#638,#610,#640,.T.);+#638 = VERTEX_POINT('',#639);+#639 = CARTESIAN_POINT('',(-0.8,-1.125,0.45));+#640 = SURFACE_CURVE('',#641,(#645,#652),.PCURVE_S1.); #641 = LINE('',#642,#643);-#642 = CARTESIAN_POINT('',(0.,1.));+#642 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #643 = VECTOR('',#644,1.);-#644 = DIRECTION('',(1.,0.));-#645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#646 = PCURVE('',#647,#652);-#647 = PLANE('',#648);-#648 = AXIS2_PLACEMENT_3D('',#649,#650,#651);-#649 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#650 = DIRECTION('',(1.,1.110223024625E-16,0.));-#651 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#652 = DEFINITIONAL_REPRESENTATION('',(#653),#657);-#653 = LINE('',#654,#655);-#654 = CARTESIAN_POINT('',(0.,-0.15));-#655 = VECTOR('',#656,1.);-#656 = DIRECTION('',(1.,0.));-#657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#658 = ORIENTED_EDGE('',*,*,#659,.F.);-#659 = EDGE_CURVE('',#660,#632,#662,.T.);-#660 = VERTEX_POINT('',#661);-#661 = CARTESIAN_POINT('',(-0.8,-1.2,0.75));-#662 = SURFACE_CURVE('',#663,(#667,#674),.PCURVE_S1.);-#663 = LINE('',#664,#665);-#664 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#665 = VECTOR('',#666,1.);-#666 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#667 = PCURVE('',#307,#668);-#668 = DEFINITIONAL_REPRESENTATION('',(#669),#673);+#644 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#645 = PCURVE('',#285,#646);+#646 = DEFINITIONAL_REPRESENTATION('',(#647),#651);+#647 = LINE('',#648,#649);+#648 = CARTESIAN_POINT('',(2.775557561563E-17,1.));+#649 = VECTOR('',#650,1.);+#650 = DIRECTION('',(1.,0.));+#651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#652 = PCURVE('',#653,#658);+#653 = PLANE('',#654);+#654 = AXIS2_PLACEMENT_3D('',#655,#656,#657);+#655 = CARTESIAN_POINT('',(-0.75,-1.125,0.45));+#656 = DIRECTION('',(0.,0.,1.));+#657 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#658 = DEFINITIONAL_REPRESENTATION('',(#659),#663);+#659 = LINE('',#660,#661);+#660 = CARTESIAN_POINT('',(5.E-02,0.23));+#661 = VECTOR('',#662,1.);+#662 = DIRECTION('',(1.224646799147E-16,-1.));+#663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#664 = ORIENTED_EDGE('',*,*,#665,.F.);+#665 = EDGE_CURVE('',#666,#638,#668,.T.);+#666 = VERTEX_POINT('',#667);+#667 = CARTESIAN_POINT('',(-0.8,-1.355,0.45));+#668 = SURFACE_CURVE('',#669,(#673,#680),.PCURVE_S1.); #669 = LINE('',#670,#671);-#670 = CARTESIAN_POINT('',(2.775557561563E-17,1.));+#670 = CARTESIAN_POINT('',(-0.8,-1.355,0.45)); #671 = VECTOR('',#672,1.);-#672 = DIRECTION('',(1.,0.));-#673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#674 = PCURVE('',#675,#680);-#675 = PLANE('',#676);-#676 = AXIS2_PLACEMENT_3D('',#677,#678,#679);-#677 = CARTESIAN_POINT('',(-0.75,-1.2,0.75));-#678 = DIRECTION('',(0.,0.,1.));-#679 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#680 = DEFINITIONAL_REPRESENTATION('',(#681),#685);-#681 = LINE('',#682,#683);-#682 = CARTESIAN_POINT('',(5.E-02,0.155));-#683 = VECTOR('',#684,1.);-#684 = DIRECTION('',(1.224646799147E-16,-1.));-#685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#686 = ORIENTED_EDGE('',*,*,#687,.F.);-#687 = EDGE_CURVE('',#688,#660,#690,.T.);-#688 = VERTEX_POINT('',#689);-#689 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#690 = SURFACE_CURVE('',#691,(#695,#702),.PCURVE_S1.);-#691 = LINE('',#692,#693);-#692 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#693 = VECTOR('',#694,1.);-#694 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#695 = PCURVE('',#307,#696);-#696 = DEFINITIONAL_REPRESENTATION('',(#697),#701);-#697 = LINE('',#698,#699);-#698 = CARTESIAN_POINT('',(9.931166044437E-17,1.));-#699 = VECTOR('',#700,1.);-#700 = DIRECTION('',(1.,-7.16272919113E-16));-#701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#702 = PCURVE('',#703,#708);-#703 = PLANE('',#704);-#704 = AXIS2_PLACEMENT_3D('',#705,#706,#707);-#705 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#706 = DIRECTION('',(1.,1.110223024625E-16,0.));-#707 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#708 = DEFINITIONAL_REPRESENTATION('',(#709),#713);-#709 = LINE('',#710,#711);-#710 = CARTESIAN_POINT('',(0.,-0.15));-#711 = VECTOR('',#712,1.);-#712 = DIRECTION('',(1.,0.));-#713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#714 = ORIENTED_EDGE('',*,*,#715,.F.);-#715 = EDGE_CURVE('',#265,#688,#716,.T.);-#716 = SURFACE_CURVE('',#717,(#720,#727),.PCURVE_S1.);-#717 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#718,#719),.UNSPECIFIED.,.F.,.F.,+#672 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#673 = PCURVE('',#285,#674);+#674 = DEFINITIONAL_REPRESENTATION('',(#675),#679);+#675 = LINE('',#676,#677);+#676 = CARTESIAN_POINT('',(3.53747043914E-17,1.));+#677 = VECTOR('',#678,1.);+#678 = DIRECTION('',(1.,0.));+#679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#680 = PCURVE('',#681,#686);+#681 = PLANE('',#682);+#682 = AXIS2_PLACEMENT_3D('',#683,#684,#685);+#683 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#684 = DIRECTION('',(1.,1.110223024625E-16,0.));+#685 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#686 = DEFINITIONAL_REPRESENTATION('',(#687),#691);+#687 = LINE('',#688,#689);+#688 = CARTESIAN_POINT('',(0.,-0.15));+#689 = VECTOR('',#690,1.);+#690 = DIRECTION('',(1.,0.));+#691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#692 = ORIENTED_EDGE('',*,*,#693,.F.);+#693 = EDGE_CURVE('',#243,#666,#694,.T.);+#694 = SURFACE_CURVE('',#695,(#698,#705),.PCURVE_S1.);+#695 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#696,#697),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#718 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));-#719 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#720 = PCURVE('',#307,#721);-#721 = DEFINITIONAL_REPRESENTATION('',(#722),#726);-#722 = LINE('',#723,#724);-#723 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));-#724 = VECTOR('',#725,1.);-#725 = DIRECTION('',(3.83337513339E-16,1.));-#726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#727 = PCURVE('',#280,#728);-#728 = DEFINITIONAL_REPRESENTATION('',(#729),#733);-#729 = LINE('',#730,#731);-#730 = CARTESIAN_POINT('',(0.134350288425,-5.619963771465E-17));-#731 = VECTOR('',#732,1.);-#732 = DIRECTION('',(-2.498001805407E-16,1.));-#733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#734 = ADVANCED_FACE('',(#735),#199,.F.);-#735 = FACE_BOUND('',#736,.F.);-#736 = EDGE_LOOP('',(#737,#738,#760,#788,#816,#844,#872,#898));-#737 = ORIENTED_EDGE('',*,*,#183,.T.);-#738 = ORIENTED_EDGE('',*,*,#739,.T.);-#739 = EDGE_CURVE('',#184,#740,#742,.T.);-#740 = VERTEX_POINT('',#741);-#741 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#742 = SURFACE_CURVE('',#743,(#746,#753),.PCURVE_S1.);-#743 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#744,#745),.UNSPECIFIED.,.F.,.F.,+#696 = CARTESIAN_POINT('',(-0.750810707854,-1.330405353927,0.1));+#697 = CARTESIAN_POINT('',(-0.8,-1.355,0.45));+#698 = PCURVE('',#285,#699);+#699 = DEFINITIONAL_REPRESENTATION('',(#700),#704);+#700 = LINE('',#701,#702);+#701 = CARTESIAN_POINT('',(-1.186202227649E-17,-7.532053044332E-17));+#702 = VECTOR('',#703,1.);+#703 = DIRECTION('',(4.723672666789E-17,1.));+#704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#705 = PCURVE('',#258,#706);+#706 = DEFINITIONAL_REPRESENTATION('',(#707),#711);+#707 = LINE('',#708,#709);+#708 = CARTESIAN_POINT('',(0.134350288425,-1.108159887982E-16));+#709 = VECTOR('',#710,1.);+#710 = DIRECTION('',(-1.665334536938E-16,1.));+#711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#712 = ADVANCED_FACE('',(#713),#177,.F.);+#713 = FACE_BOUND('',#714,.F.);+#714 = EDGE_LOOP('',(#715,#716,#738,#766,#794,#822,#850,#876));+#715 = ORIENTED_EDGE('',*,*,#161,.T.);+#716 = ORIENTED_EDGE('',*,*,#717,.T.);+#717 = EDGE_CURVE('',#162,#718,#720,.T.);+#718 = VERTEX_POINT('',#719);+#719 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#720 = SURFACE_CURVE('',#721,(#724,#731),.PCURVE_S1.);+#721 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#722,#723),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#744 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));-#745 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#746 = PCURVE('',#199,#747);-#747 = DEFINITIONAL_REPRESENTATION('',(#748),#752);-#748 = LINE('',#749,#750);-#749 = CARTESIAN_POINT('',(2.71,-4.77063817192E-18));-#750 = VECTOR('',#751,1.);-#751 = DIRECTION('',(-4.440892098501E-16,1.));-#752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#753 = PCURVE('',#226,#754);-#754 = DEFINITIONAL_REPRESENTATION('',(#755),#759);-#755 = LINE('',#756,#757);-#756 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));-#757 = VECTOR('',#758,1.);-#758 = DIRECTION('',(4.118507024083E-16,1.));-#759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#760 = ORIENTED_EDGE('',*,*,#761,.F.);-#761 = EDGE_CURVE('',#762,#740,#764,.T.);-#762 = VERTEX_POINT('',#763);-#763 = CARTESIAN_POINT('',(0.8,-1.2,0.75));-#764 = SURFACE_CURVE('',#765,(#769,#776),.PCURVE_S1.);-#765 = LINE('',#766,#767);-#766 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#767 = VECTOR('',#768,1.);-#768 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#769 = PCURVE('',#199,#770);-#770 = DEFINITIONAL_REPRESENTATION('',(#771),#775);+#722 = CARTESIAN_POINT('',(0.750810707854,-1.330405353927,0.1));+#723 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#724 = PCURVE('',#177,#725);+#725 = DEFINITIONAL_REPRESENTATION('',(#726),#730);+#726 = LINE('',#727,#728);+#727 = CARTESIAN_POINT('',(2.71,-1.675573537744E-16));+#728 = VECTOR('',#729,1.);+#729 = DIRECTION('',(0.,1.));+#730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#731 = PCURVE('',#204,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#737);+#733 = LINE('',#734,#735);+#734 = CARTESIAN_POINT('',(6.486696845055E-17,-6.595397745365E-17));+#735 = VECTOR('',#736,1.);+#736 = DIRECTION('',(-9.773191460854E-17,1.));+#737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#738 = ORIENTED_EDGE('',*,*,#739,.F.);+#739 = EDGE_CURVE('',#740,#718,#742,.T.);+#740 = VERTEX_POINT('',#741);+#741 = CARTESIAN_POINT('',(0.8,-1.125,0.45));+#742 = SURFACE_CURVE('',#743,(#747,#754),.PCURVE_S1.);+#743 = LINE('',#744,#745);+#744 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#745 = VECTOR('',#746,1.);+#746 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#747 = PCURVE('',#177,#748);+#748 = DEFINITIONAL_REPRESENTATION('',(#749),#753);+#749 = LINE('',#750,#751);+#750 = CARTESIAN_POINT('',(0.,1.));+#751 = VECTOR('',#752,1.);+#752 = DIRECTION('',(1.,0.));+#753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#754 = PCURVE('',#755,#760);+#755 = PLANE('',#756);+#756 = AXIS2_PLACEMENT_3D('',#757,#758,#759);+#757 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#758 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#759 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#760 = DEFINITIONAL_REPRESENTATION('',(#761),#765);+#761 = LINE('',#762,#763);+#762 = CARTESIAN_POINT('',(0.,-0.15));+#763 = VECTOR('',#764,1.);+#764 = DIRECTION('',(1.,0.));+#765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#766 = ORIENTED_EDGE('',*,*,#767,.F.);+#767 = EDGE_CURVE('',#768,#740,#770,.T.);+#768 = VERTEX_POINT('',#769);+#769 = CARTESIAN_POINT('',(0.8,-0.775,0.45));+#770 = SURFACE_CURVE('',#771,(#775,#782),.PCURVE_S1.); #771 = LINE('',#772,#773);-#772 = CARTESIAN_POINT('',(0.,1.));+#772 = CARTESIAN_POINT('',(0.8,1.355,0.45)); #773 = VECTOR('',#774,1.);-#774 = DIRECTION('',(1.,0.));-#775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#776 = PCURVE('',#777,#782);-#777 = PLANE('',#778);-#778 = AXIS2_PLACEMENT_3D('',#779,#780,#781);-#779 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#780 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#781 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#782 = DEFINITIONAL_REPRESENTATION('',(#783),#787);-#783 = LINE('',#784,#785);-#784 = CARTESIAN_POINT('',(0.,-0.15));-#785 = VECTOR('',#786,1.);-#786 = DIRECTION('',(1.,0.));-#787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#788 = ORIENTED_EDGE('',*,*,#789,.F.);-#789 = EDGE_CURVE('',#790,#762,#792,.T.);-#790 = VERTEX_POINT('',#791);-#791 = CARTESIAN_POINT('',(0.8,-0.7,0.75));-#792 = SURFACE_CURVE('',#793,(#797,#804),.PCURVE_S1.);-#793 = LINE('',#794,#795);-#794 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#795 = VECTOR('',#796,1.);-#796 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#797 = PCURVE('',#199,#798);-#798 = DEFINITIONAL_REPRESENTATION('',(#799),#803);+#774 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#775 = PCURVE('',#177,#776);+#776 = DEFINITIONAL_REPRESENTATION('',(#777),#781);+#777 = LINE('',#778,#779);+#778 = CARTESIAN_POINT('',(0.,1.));+#779 = VECTOR('',#780,1.);+#780 = DIRECTION('',(1.,-6.344131569287E-16));+#781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#782 = PCURVE('',#783,#788);+#783 = PLANE('',#784);+#784 = AXIS2_PLACEMENT_3D('',#785,#786,#787);+#785 = CARTESIAN_POINT('',(0.75,-0.775,0.45));+#786 = DIRECTION('',(0.,0.,1.));+#787 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#793);+#789 = LINE('',#790,#791);+#790 = CARTESIAN_POINT('',(5.E-02,2.13));+#791 = VECTOR('',#792,1.);+#792 = DIRECTION('',(0.,-1.));+#793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#794 = ORIENTED_EDGE('',*,*,#795,.F.);+#795 = EDGE_CURVE('',#796,#768,#798,.T.);+#796 = VERTEX_POINT('',#797);+#797 = CARTESIAN_POINT('',(0.8,0.775,0.45));+#798 = SURFACE_CURVE('',#799,(#803,#810),.PCURVE_S1.); #799 = LINE('',#800,#801);-#800 = CARTESIAN_POINT('',(0.,1.));+#800 = CARTESIAN_POINT('',(0.8,1.355,0.45)); #801 = VECTOR('',#802,1.);-#802 = DIRECTION('',(1.,0.));-#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#804 = PCURVE('',#805,#810);-#805 = PLANE('',#806);-#806 = AXIS2_PLACEMENT_3D('',#807,#808,#809);-#807 = CARTESIAN_POINT('',(0.75,-0.7,0.75));-#808 = DIRECTION('',(0.,0.,1.));-#809 = DIRECTION('',(1.,1.110223024625E-16,-0.));-#810 = DEFINITIONAL_REPRESENTATION('',(#811),#815);-#811 = LINE('',#812,#813);-#812 = CARTESIAN_POINT('',(5.E-02,2.055));-#813 = VECTOR('',#814,1.);-#814 = DIRECTION('',(0.,-1.));-#815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#816 = ORIENTED_EDGE('',*,*,#817,.F.);-#817 = EDGE_CURVE('',#818,#790,#820,.T.);-#818 = VERTEX_POINT('',#819);-#819 = CARTESIAN_POINT('',(0.8,0.7,0.75));-#820 = SURFACE_CURVE('',#821,(#825,#832),.PCURVE_S1.);-#821 = LINE('',#822,#823);-#822 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#823 = VECTOR('',#824,1.);-#824 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#825 = PCURVE('',#199,#826);-#826 = DEFINITIONAL_REPRESENTATION('',(#827),#831);+#802 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#803 = PCURVE('',#177,#804);+#804 = DEFINITIONAL_REPRESENTATION('',(#805),#809);+#805 = LINE('',#806,#807);+#806 = CARTESIAN_POINT('',(0.,1.));+#807 = VECTOR('',#808,1.);+#808 = DIRECTION('',(1.,0.));+#809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#810 = PCURVE('',#811,#816);+#811 = PLANE('',#812);+#812 = AXIS2_PLACEMENT_3D('',#813,#814,#815);+#813 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#814 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#815 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#816 = DEFINITIONAL_REPRESENTATION('',(#817),#821);+#817 = LINE('',#818,#819);+#818 = CARTESIAN_POINT('',(0.,-0.15));+#819 = VECTOR('',#820,1.);+#820 = DIRECTION('',(1.,0.));+#821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#822 = ORIENTED_EDGE('',*,*,#823,.F.);+#823 = EDGE_CURVE('',#824,#796,#826,.T.);+#824 = VERTEX_POINT('',#825);+#825 = CARTESIAN_POINT('',(0.8,1.125,0.45));+#826 = SURFACE_CURVE('',#827,(#831,#838),.PCURVE_S1.); #827 = LINE('',#828,#829);-#828 = CARTESIAN_POINT('',(0.,1.));+#828 = CARTESIAN_POINT('',(0.8,1.355,0.45)); #829 = VECTOR('',#830,1.);-#830 = DIRECTION('',(1.,7.930164461608E-17));-#831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#832 = PCURVE('',#833,#838);-#833 = PLANE('',#834);-#834 = AXIS2_PLACEMENT_3D('',#835,#836,#837);-#835 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#836 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#838 = DEFINITIONAL_REPRESENTATION('',(#839),#843);-#839 = LINE('',#840,#841);-#840 = CARTESIAN_POINT('',(0.,-0.15));-#841 = VECTOR('',#842,1.);-#842 = DIRECTION('',(1.,0.));-#843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#844 = ORIENTED_EDGE('',*,*,#845,.F.);-#845 = EDGE_CURVE('',#846,#818,#848,.T.);-#846 = VERTEX_POINT('',#847);-#847 = CARTESIAN_POINT('',(0.8,1.2,0.75));-#848 = SURFACE_CURVE('',#849,(#853,#860),.PCURVE_S1.);-#849 = LINE('',#850,#851);-#850 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#851 = VECTOR('',#852,1.);-#852 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#853 = PCURVE('',#199,#854);-#854 = DEFINITIONAL_REPRESENTATION('',(#855),#859);-#855 = LINE('',#856,#857);-#856 = CARTESIAN_POINT('',(2.775557561563E-17,1.));-#857 = VECTOR('',#858,1.);-#858 = DIRECTION('',(1.,0.));-#859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#860 = PCURVE('',#861,#866);-#861 = PLANE('',#862);-#862 = AXIS2_PLACEMENT_3D('',#863,#864,#865);-#863 = CARTESIAN_POINT('',(0.75,1.2,0.75));-#864 = DIRECTION('',(0.,0.,1.));-#865 = DIRECTION('',(1.,1.110223024625E-16,-0.));-#866 = DEFINITIONAL_REPRESENTATION('',(#867),#871);-#867 = LINE('',#868,#869);-#868 = CARTESIAN_POINT('',(5.E-02,0.155));-#869 = VECTOR('',#870,1.);-#870 = DIRECTION('',(0.,-1.));-#871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#872 = ORIENTED_EDGE('',*,*,#873,.F.);-#873 = EDGE_CURVE('',#343,#846,#874,.T.);-#874 = SURFACE_CURVE('',#875,(#879,#886),.PCURVE_S1.);-#875 = LINE('',#876,#877);-#876 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#877 = VECTOR('',#878,1.);-#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#879 = PCURVE('',#199,#880);-#880 = DEFINITIONAL_REPRESENTATION('',(#881),#885);-#881 = LINE('',#882,#883);-#882 = CARTESIAN_POINT('',(9.931166044437E-17,1.));-#883 = VECTOR('',#884,1.);-#884 = DIRECTION('',(1.,-7.16272919113E-16));-#885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#886 = PCURVE('',#887,#892);-#887 = PLANE('',#888);-#888 = AXIS2_PLACEMENT_3D('',#889,#890,#891);-#889 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#890 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#891 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#830 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#831 = PCURVE('',#177,#832);+#832 = DEFINITIONAL_REPRESENTATION('',(#833),#837);+#833 = LINE('',#834,#835);+#834 = CARTESIAN_POINT('',(2.775557561563E-17,1.));+#835 = VECTOR('',#836,1.);+#836 = DIRECTION('',(1.,0.));+#837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#838 = PCURVE('',#839,#844);+#839 = PLANE('',#840);+#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843);+#841 = CARTESIAN_POINT('',(0.75,1.125,0.45));+#842 = DIRECTION('',(0.,0.,1.));+#843 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#844 = DEFINITIONAL_REPRESENTATION('',(#845),#849);+#845 = LINE('',#846,#847);+#846 = CARTESIAN_POINT('',(5.E-02,0.23));+#847 = VECTOR('',#848,1.);+#848 = DIRECTION('',(0.,-1.));+#849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#850 = ORIENTED_EDGE('',*,*,#851,.F.);+#851 = EDGE_CURVE('',#321,#824,#852,.T.);+#852 = SURFACE_CURVE('',#853,(#857,#864),.PCURVE_S1.);+#853 = LINE('',#854,#855);+#854 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#855 = VECTOR('',#856,1.);+#856 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#857 = PCURVE('',#177,#858);+#858 = DEFINITIONAL_REPRESENTATION('',(#859),#863);+#859 = LINE('',#860,#861);+#860 = CARTESIAN_POINT('',(3.53747043914E-17,1.));+#861 = VECTOR('',#862,1.);+#862 = DIRECTION('',(1.,0.));+#863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#864 = PCURVE('',#865,#870);+#865 = PLANE('',#866);+#866 = AXIS2_PLACEMENT_3D('',#867,#868,#869);+#867 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#868 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#869 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#870 = DEFINITIONAL_REPRESENTATION('',(#871),#875);+#871 = LINE('',#872,#873);+#872 = CARTESIAN_POINT('',(0.,-0.15));+#873 = VECTOR('',#874,1.);+#874 = DIRECTION('',(1.,0.));+#875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#876 = ORIENTED_EDGE('',*,*,#320,.F.);+#877 = ADVANCED_FACE('',(#878),#258,.F.);+#878 = FACE_BOUND('',#879,.F.);+#879 = EDGE_LOOP('',(#880,#881,#882,#910));+#880 = ORIENTED_EDGE('',*,*,#242,.T.);+#881 = ORIENTED_EDGE('',*,*,#693,.T.);+#882 = ORIENTED_EDGE('',*,*,#883,.F.);+#883 = EDGE_CURVE('',#884,#666,#886,.T.);+#884 = VERTEX_POINT('',#885);+#885 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#886 = SURFACE_CURVE('',#887,(#891,#898),.PCURVE_S1.);+#887 = LINE('',#888,#889);+#888 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#889 = VECTOR('',#890,1.);+#890 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#891 = PCURVE('',#258,#892); #892 = DEFINITIONAL_REPRESENTATION('',(#893),#897); #893 = LINE('',#894,#895);-#894 = CARTESIAN_POINT('',(0.,-0.15));+#894 = CARTESIAN_POINT('',(-1.879261029204E-16,1.)); #895 = VECTOR('',#896,1.); #896 = DIRECTION('',(1.,0.)); #897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#898 = ORIENTED_EDGE('',*,*,#342,.F.);-#899 = ADVANCED_FACE('',(#900),#280,.F.);-#900 = FACE_BOUND('',#901,.F.);-#901 = EDGE_LOOP('',(#902,#903,#904,#932));-#902 = ORIENTED_EDGE('',*,*,#264,.T.);-#903 = ORIENTED_EDGE('',*,*,#715,.T.);-#904 = ORIENTED_EDGE('',*,*,#905,.F.);-#905 = EDGE_CURVE('',#906,#688,#908,.T.);-#906 = VERTEX_POINT('',#907);-#907 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#908 = SURFACE_CURVE('',#909,(#913,#920),.PCURVE_S1.);-#909 = LINE('',#910,#911);-#910 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#911 = VECTOR('',#912,1.);-#912 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#913 = PCURVE('',#280,#914);-#914 = DEFINITIONAL_REPRESENTATION('',(#915),#919);-#915 = LINE('',#916,#917);-#916 = CARTESIAN_POINT('',(-1.880156086189E-16,1.));-#917 = VECTOR('',#918,1.);-#918 = DIRECTION('',(1.,0.));-#919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#920 = PCURVE('',#921,#926);-#921 = PLANE('',#922);-#922 = AXIS2_PLACEMENT_3D('',#923,#924,#925);-#923 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));-#924 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#925 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#926 = DEFINITIONAL_REPRESENTATION('',(#927),#931);-#927 = LINE('',#928,#929);-#928 = CARTESIAN_POINT('',(0.,-0.15));-#929 = VECTOR('',#930,1.);-#930 = DIRECTION('',(1.,0.));-#931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#932 = ORIENTED_EDGE('',*,*,#933,.F.);-#933 = EDGE_CURVE('',#238,#906,#934,.T.);-#934 = SURFACE_CURVE('',#935,(#938,#945),.PCURVE_S1.);-#935 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#936,#937),.UNSPECIFIED.,.F.,.F.,+#898 = PCURVE('',#899,#904);+#899 = PLANE('',#900);+#900 = AXIS2_PLACEMENT_3D('',#901,#902,#903);+#901 = CARTESIAN_POINT('',(-0.705,-1.45,0.6));+#902 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#903 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#904 = DEFINITIONAL_REPRESENTATION('',(#905),#909);+#905 = LINE('',#906,#907);+#906 = CARTESIAN_POINT('',(0.,-0.15));+#907 = VECTOR('',#908,1.);+#908 = DIRECTION('',(1.,0.));+#909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#910 = ORIENTED_EDGE('',*,*,#911,.F.);+#911 = EDGE_CURVE('',#216,#884,#912,.T.);+#912 = SURFACE_CURVE('',#913,(#916,#923),.PCURVE_S1.);+#913 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#914,#915),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#936 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));-#937 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#938 = PCURVE('',#280,#939);-#939 = DEFINITIONAL_REPRESENTATION('',(#940),#944);-#940 = LINE('',#941,#942);-#941 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));-#942 = VECTOR('',#943,1.);-#943 = DIRECTION('',(-2.801248917812E-16,1.));-#944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#945 = PCURVE('',#253,#946);-#946 = DEFINITIONAL_REPRESENTATION('',(#947),#951);-#947 = LINE('',#948,#949);-#948 = CARTESIAN_POINT('',(1.41,-7.837603163075E-17));-#949 = VECTOR('',#950,1.);-#950 = DIRECTION('',(0.,1.));-#951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#952 = ADVANCED_FACE('',(#953),#226,.F.);-#953 = FACE_BOUND('',#954,.F.);-#954 = EDGE_LOOP('',(#955,#956,#978,#1004));-#955 = ORIENTED_EDGE('',*,*,#210,.T.);-#956 = ORIENTED_EDGE('',*,*,#957,.T.);-#957 = EDGE_CURVE('',#211,#958,#960,.T.);-#958 = VERTEX_POINT('',#959);-#959 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#960 = SURFACE_CURVE('',#961,(#964,#971),.PCURVE_S1.);-#961 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#962,#963),.UNSPECIFIED.,.F.,.F.,+#914 = CARTESIAN_POINT('',(-0.680405353927,-1.400810707854,0.1));+#915 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#916 = PCURVE('',#258,#917);+#917 = DEFINITIONAL_REPRESENTATION('',(#918),#922);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(-4.024982009691E-17,-3.326528190151E-17));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.047063456038E-17,1.));+#922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#923 = PCURVE('',#231,#924);+#924 = DEFINITIONAL_REPRESENTATION('',(#925),#929);+#925 = LINE('',#926,#927);+#926 = CARTESIAN_POINT('',(1.41,-9.016706823829E-17));+#927 = VECTOR('',#928,1.);+#928 = DIRECTION('',(0.,1.));+#929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#930 = ADVANCED_FACE('',(#931),#204,.F.);+#931 = FACE_BOUND('',#932,.F.);+#932 = EDGE_LOOP('',(#933,#934,#956,#982));+#933 = ORIENTED_EDGE('',*,*,#188,.T.);+#934 = ORIENTED_EDGE('',*,*,#935,.T.);+#935 = EDGE_CURVE('',#189,#936,#938,.T.);+#936 = VERTEX_POINT('',#937);+#937 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#938 = SURFACE_CURVE('',#939,(#942,#949),.PCURVE_S1.);+#939 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#940,#941),.UNSPECIFIED.,.F.,.F., (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#962 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));-#963 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#964 = PCURVE('',#226,#965);-#965 = DEFINITIONAL_REPRESENTATION('',(#966),#970);-#966 = LINE('',#967,#968);-#967 = CARTESIAN_POINT('',(0.134350288425,-6.07217739169E-17));-#968 = VECTOR('',#969,1.);-#969 = DIRECTION('',(3.330669073875E-16,1.));-#970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#971 = PCURVE('',#253,#972);-#972 = DEFINITIONAL_REPRESENTATION('',(#973),#977);-#973 = LINE('',#974,#975);-#974 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));-#975 = VECTOR('',#976,1.);-#976 = DIRECTION('',(1.663168722973E-16,1.));-#977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#978 = ORIENTED_EDGE('',*,*,#979,.F.);-#979 = EDGE_CURVE('',#740,#958,#980,.T.);-#980 = SURFACE_CURVE('',#981,(#985,#992),.PCURVE_S1.);-#981 = LINE('',#982,#983);-#982 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#983 = VECTOR('',#984,1.);-#984 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#985 = PCURVE('',#226,#986);-#986 = DEFINITIONAL_REPRESENTATION('',(#987),#991);-#987 = LINE('',#988,#989);-#988 = CARTESIAN_POINT('',(-2.980584140513E-17,1.));-#989 = VECTOR('',#990,1.);-#990 = DIRECTION('',(1.,0.));-#991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#992 = PCURVE('',#993,#998);-#993 = PLANE('',#994);-#994 = AXIS2_PLACEMENT_3D('',#995,#996,#997);-#995 = CARTESIAN_POINT('',(0.8,-1.355,0.9));-#996 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#997 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#998 = DEFINITIONAL_REPRESENTATION('',(#999),#1003);-#999 = LINE('',#1000,#1001);-#1000 = CARTESIAN_POINT('',(-0.,-0.15));-#1001 = VECTOR('',#1002,1.);-#1002 = DIRECTION('',(1.,0.));-#1003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1004 = ORIENTED_EDGE('',*,*,#739,.F.);-#1005 = ADVANCED_FACE('',(#1006),#253,.F.);-#1006 = FACE_BOUND('',#1007,.F.);-#1007 = EDGE_LOOP('',(#1008,#1009,#1010,#1036));-#1008 = ORIENTED_EDGE('',*,*,#237,.T.);-#1009 = ORIENTED_EDGE('',*,*,#933,.T.);-#1010 = ORIENTED_EDGE('',*,*,#1011,.F.);-#1011 = EDGE_CURVE('',#958,#906,#1012,.T.);-#1012 = SURFACE_CURVE('',#1013,(#1017,#1024),.PCURVE_S1.);-#1013 = LINE('',#1014,#1015);-#1014 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#1015 = VECTOR('',#1016,1.);-#1016 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#1017 = PCURVE('',#253,#1018);-#1018 = DEFINITIONAL_REPRESENTATION('',(#1019),#1023);-#1019 = LINE('',#1020,#1021);-#1020 = CARTESIAN_POINT('',(1.664985591449E-16,1.));-#1021 = VECTOR('',#1022,1.);-#1022 = DIRECTION('',(1.,7.873922160462E-17));-#1023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1024 = PCURVE('',#1025,#1030);-#1025 = PLANE('',#1026);-#1026 = AXIS2_PLACEMENT_3D('',#1027,#1028,#1029);-#1027 = CARTESIAN_POINT('',(0.705,-1.45,0.9));-#1028 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1029 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#1030 = DEFINITIONAL_REPRESENTATION('',(#1031),#1035);-#1031 = LINE('',#1032,#1033);-#1032 = CARTESIAN_POINT('',(-0.,-0.15));-#1033 = VECTOR('',#1034,1.);-#1034 = DIRECTION('',(1.,0.));-#1035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1036 = ORIENTED_EDGE('',*,*,#957,.F.);-#1037 = ADVANCED_FACE('',(#1038),#378,.F.);-#1038 = FACE_BOUND('',#1039,.F.);-#1039 = EDGE_LOOP('',(#1040,#1041,#1061,#1082));-#1040 = ORIENTED_EDGE('',*,*,#364,.T.);-#1041 = ORIENTED_EDGE('',*,*,#1042,.T.);-#1042 = EDGE_CURVE('',#343,#1043,#1045,.T.);-#1043 = VERTEX_POINT('',#1044);-#1044 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#1045 = SURFACE_CURVE('',#1046,(#1049,#1055),.PCURVE_S1.);-#1046 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1047,#1048),.UNSPECIFIED.,.F.,+#940 = CARTESIAN_POINT('',(0.680405353927,-1.400810707854,0.1));+#941 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#942 = PCURVE('',#204,#943);+#943 = DEFINITIONAL_REPRESENTATION('',(#944),#948);+#944 = LINE('',#945,#946);+#945 = CARTESIAN_POINT('',(0.134350288425,-6.59404249265E-17));+#946 = VECTOR('',#947,1.);+#947 = DIRECTION('',(-2.775557561563E-17,1.));+#948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#949 = PCURVE('',#231,#950);+#950 = DEFINITIONAL_REPRESENTATION('',(#951),#955);+#951 = LINE('',#952,#953);+#952 = CARTESIAN_POINT('',(-6.456413101085E-17,-3.169082947721E-17));+#953 = VECTOR('',#954,1.);+#954 = DIRECTION('',(3.55241968144E-17,1.));+#955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#956 = ORIENTED_EDGE('',*,*,#957,.F.);+#957 = EDGE_CURVE('',#718,#936,#958,.T.);+#958 = SURFACE_CURVE('',#959,(#963,#970),.PCURVE_S1.);+#959 = LINE('',#960,#961);+#960 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#961 = VECTOR('',#962,1.);+#962 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#963 = PCURVE('',#204,#964);+#964 = DEFINITIONAL_REPRESENTATION('',(#965),#969);+#965 = LINE('',#966,#967);+#966 = CARTESIAN_POINT('',(4.776915883756E-17,1.));+#967 = VECTOR('',#968,1.);+#968 = DIRECTION('',(1.,0.));+#969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#970 = PCURVE('',#971,#976);+#971 = PLANE('',#972);+#972 = AXIS2_PLACEMENT_3D('',#973,#974,#975);+#973 = CARTESIAN_POINT('',(0.8,-1.355,0.6));+#974 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#975 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#976 = DEFINITIONAL_REPRESENTATION('',(#977),#981);+#977 = LINE('',#978,#979);+#978 = CARTESIAN_POINT('',(-0.,-0.15));+#979 = VECTOR('',#980,1.);+#980 = DIRECTION('',(1.,0.));+#981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#982 = ORIENTED_EDGE('',*,*,#717,.F.);+#983 = ADVANCED_FACE('',(#984),#231,.F.);+#984 = FACE_BOUND('',#985,.F.);+#985 = EDGE_LOOP('',(#986,#987,#988,#1014));+#986 = ORIENTED_EDGE('',*,*,#215,.T.);+#987 = ORIENTED_EDGE('',*,*,#911,.T.);+#988 = ORIENTED_EDGE('',*,*,#989,.F.);+#989 = EDGE_CURVE('',#936,#884,#990,.T.);+#990 = SURFACE_CURVE('',#991,(#995,#1002),.PCURVE_S1.);+#991 = LINE('',#992,#993);+#992 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#993 = VECTOR('',#994,1.);+#994 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#995 = PCURVE('',#231,#996);+#996 = DEFINITIONAL_REPRESENTATION('',(#997),#1001);+#997 = LINE('',#998,#999);+#998 = CARTESIAN_POINT('',(8.198236826606E-17,1.));+#999 = VECTOR('',#1000,1.);+#1000 = DIRECTION('',(1.,0.));+#1001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1002 = PCURVE('',#1003,#1008);+#1003 = PLANE('',#1004);+#1004 = AXIS2_PLACEMENT_3D('',#1005,#1006,#1007);+#1005 = CARTESIAN_POINT('',(0.705,-1.45,0.6));+#1006 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1007 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1008 = DEFINITIONAL_REPRESENTATION('',(#1009),#1013);+#1009 = LINE('',#1010,#1011);+#1010 = CARTESIAN_POINT('',(-0.,-0.15));+#1011 = VECTOR('',#1012,1.);+#1012 = DIRECTION('',(1.,0.));+#1013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1014 = ORIENTED_EDGE('',*,*,#935,.F.);+#1015 = ADVANCED_FACE('',(#1016),#356,.F.);+#1016 = FACE_BOUND('',#1017,.F.);+#1017 = EDGE_LOOP('',(#1018,#1019,#1039,#1060));+#1018 = ORIENTED_EDGE('',*,*,#342,.T.);+#1019 = ORIENTED_EDGE('',*,*,#1020,.T.);+#1020 = EDGE_CURVE('',#321,#1021,#1023,.T.);+#1021 = VERTEX_POINT('',#1022);+#1022 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#1023 = SURFACE_CURVE('',#1024,(#1027,#1033),.PCURVE_S1.);+#1024 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1025,#1026),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1047 = CARTESIAN_POINT('',(0.8,1.355,0.75));-#1048 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#1049 = PCURVE('',#378,#1050);-#1050 = DEFINITIONAL_REPRESENTATION('',(#1051),#1054);-#1051 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1052,#1053),.UNSPECIFIED.,.F.,+#1025 = CARTESIAN_POINT('',(0.8,1.355,0.45));+#1026 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#1027 = PCURVE('',#356,#1028);+#1028 = DEFINITIONAL_REPRESENTATION('',(#1029),#1032);+#1029 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1030,#1031),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1052 = CARTESIAN_POINT('',(0.134350288425,-0.15));-#1053 = CARTESIAN_POINT('',(0.134350288425,0.));-#1054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#1030 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#1031 = CARTESIAN_POINT('',(0.134350288425,0.));+#1032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1055 = PCURVE('',#887,#1056);-#1056 = DEFINITIONAL_REPRESENTATION('',(#1057),#1060);-#1057 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1058,#1059),.UNSPECIFIED.,.F.,+#1033 = PCURVE('',#865,#1034);+#1034 = DEFINITIONAL_REPRESENTATION('',(#1035),#1038);+#1035 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1036,#1037),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1058 = CARTESIAN_POINT('',(0.,-0.15));-#1059 = CARTESIAN_POINT('',(0.,0.));-#1060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1061 = ORIENTED_EDGE('',*,*,#1062,.F.);-#1062 = EDGE_CURVE('',#396,#1043,#1063,.T.);-#1063 = SURFACE_CURVE('',#1064,(#1068,#1075),.PCURVE_S1.);-#1064 = LINE('',#1065,#1066);-#1065 = CARTESIAN_POINT('',(0.705,1.45,0.9));-#1066 = VECTOR('',#1067,1.);-#1067 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#1068 = PCURVE('',#378,#1069);-#1069 = DEFINITIONAL_REPRESENTATION('',(#1070),#1074);-#1070 = LINE('',#1071,#1072);-#1071 = CARTESIAN_POINT('',(0.,0.));-#1072 = VECTOR('',#1073,1.);-#1073 = DIRECTION('',(1.,0.));-#1074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1075 = PCURVE('',#431,#1076);-#1076 = DEFINITIONAL_REPRESENTATION('',(#1077),#1081);-#1077 = LINE('',#1078,#1079);-#1078 = CARTESIAN_POINT('',(0.705,-1.25E-02));-#1079 = VECTOR('',#1080,1.);-#1080 = DIRECTION('',(0.707106781187,0.707106781187));-#1081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1082 = ORIENTED_EDGE('',*,*,#395,.F.);-#1083 = ADVANCED_FACE('',(#1084),#431,.F.);-#1084 = FACE_BOUND('',#1085,.F.);-#1085 = EDGE_LOOP('',(#1086,#1109,#1110,#1111,#1134,#1162,#1190,#1218,- #1246,#1274,#1302,#1330));-#1086 = ORIENTED_EDGE('',*,*,#1087,.T.);-#1087 = EDGE_CURVE('',#1088,#416,#1090,.T.);-#1088 = VERTEX_POINT('',#1089);-#1089 = CARTESIAN_POINT('',(-0.8,1.355,0.9));-#1090 = SURFACE_CURVE('',#1091,(#1095,#1102),.PCURVE_S1.);-#1091 = LINE('',#1092,#1093);-#1092 = CARTESIAN_POINT('',(-0.8,1.355,0.9));-#1093 = VECTOR('',#1094,1.);-#1094 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#1095 = PCURVE('',#431,#1096);-#1096 = DEFINITIONAL_REPRESENTATION('',(#1097),#1101);-#1097 = LINE('',#1098,#1099);-#1098 = CARTESIAN_POINT('',(-0.8,8.25E-02));-#1099 = VECTOR('',#1100,1.);-#1100 = DIRECTION('',(0.707106781187,-0.707106781187));-#1101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1102 = PCURVE('',#455,#1103);-#1103 = DEFINITIONAL_REPRESENTATION('',(#1104),#1108);-#1104 = LINE('',#1105,#1106);-#1105 = CARTESIAN_POINT('',(0.,0.));-#1106 = VECTOR('',#1107,1.);-#1107 = DIRECTION('',(1.,0.));-#1108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1109 = ORIENTED_EDGE('',*,*,#415,.T.);-#1110 = ORIENTED_EDGE('',*,*,#1062,.T.);-#1111 = ORIENTED_EDGE('',*,*,#1112,.T.);-#1112 = EDGE_CURVE('',#1043,#1113,#1115,.T.);-#1113 = VERTEX_POINT('',#1114);-#1114 = CARTESIAN_POINT('',(0.8,1.2,0.9));-#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.);-#1116 = LINE('',#1117,#1118);-#1117 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#1118 = VECTOR('',#1119,1.);-#1119 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#1120 = PCURVE('',#431,#1121);-#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);-#1122 = LINE('',#1123,#1124);-#1123 = CARTESIAN_POINT('',(0.8,8.25E-02));-#1124 = VECTOR('',#1125,1.);-#1125 = DIRECTION('',(-4.08998344385E-17,1.));-#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1127 = PCURVE('',#887,#1128);-#1128 = DEFINITIONAL_REPRESENTATION('',(#1129),#1133);-#1129 = LINE('',#1130,#1131);-#1130 = CARTESIAN_POINT('',(0.,0.));-#1131 = VECTOR('',#1132,1.);-#1132 = DIRECTION('',(1.,0.));-#1133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1134 = ORIENTED_EDGE('',*,*,#1135,.T.);-#1135 = EDGE_CURVE('',#1113,#1136,#1138,.T.);-#1136 = VERTEX_POINT('',#1137);-#1137 = CARTESIAN_POINT('',(0.775,1.2,0.9));-#1138 = SURFACE_CURVE('',#1139,(#1143,#1150),.PCURVE_S1.);-#1139 = LINE('',#1140,#1141);-#1140 = CARTESIAN_POINT('',(0.85,1.2,0.9));-#1141 = VECTOR('',#1142,1.);-#1142 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#1143 = PCURVE('',#431,#1144);-#1144 = DEFINITIONAL_REPRESENTATION('',(#1145),#1149);+#1036 = CARTESIAN_POINT('',(0.,-0.15));+#1037 = CARTESIAN_POINT('',(0.,0.));+#1038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1039 = ORIENTED_EDGE('',*,*,#1040,.F.);+#1040 = EDGE_CURVE('',#374,#1021,#1041,.T.);+#1041 = SURFACE_CURVE('',#1042,(#1046,#1053),.PCURVE_S1.);+#1042 = LINE('',#1043,#1044);+#1043 = CARTESIAN_POINT('',(0.705,1.45,0.6));+#1044 = VECTOR('',#1045,1.);+#1045 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1046 = PCURVE('',#356,#1047);+#1047 = DEFINITIONAL_REPRESENTATION('',(#1048),#1052);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(0.,0.));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,0.));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1053 = PCURVE('',#409,#1054);+#1054 = DEFINITIONAL_REPRESENTATION('',(#1055),#1059);+#1055 = LINE('',#1056,#1057);+#1056 = CARTESIAN_POINT('',(0.705,-1.25E-02));+#1057 = VECTOR('',#1058,1.);+#1058 = DIRECTION('',(0.707106781187,0.707106781187));+#1059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1060 = ORIENTED_EDGE('',*,*,#373,.F.);+#1061 = ADVANCED_FACE('',(#1062),#409,.F.);+#1062 = FACE_BOUND('',#1063,.F.);+#1063 = EDGE_LOOP('',(#1064,#1087,#1088,#1089,#1112,#1140,#1168,#1196,+ #1224,#1252,#1280,#1308));+#1064 = ORIENTED_EDGE('',*,*,#1065,.T.);+#1065 = EDGE_CURVE('',#1066,#394,#1068,.T.);+#1066 = VERTEX_POINT('',#1067);+#1067 = CARTESIAN_POINT('',(-0.8,1.355,0.6));+#1068 = SURFACE_CURVE('',#1069,(#1073,#1080),.PCURVE_S1.);+#1069 = LINE('',#1070,#1071);+#1070 = CARTESIAN_POINT('',(-0.8,1.355,0.6));+#1071 = VECTOR('',#1072,1.);+#1072 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1073 = PCURVE('',#409,#1074);+#1074 = DEFINITIONAL_REPRESENTATION('',(#1075),#1079);+#1075 = LINE('',#1076,#1077);+#1076 = CARTESIAN_POINT('',(-0.8,8.25E-02));+#1077 = VECTOR('',#1078,1.);+#1078 = DIRECTION('',(0.707106781187,-0.707106781187));+#1079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1080 = PCURVE('',#433,#1081);+#1081 = DEFINITIONAL_REPRESENTATION('',(#1082),#1086);+#1082 = LINE('',#1083,#1084);+#1083 = CARTESIAN_POINT('',(0.,0.));+#1084 = VECTOR('',#1085,1.);+#1085 = DIRECTION('',(1.,0.));+#1086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1087 = ORIENTED_EDGE('',*,*,#393,.T.);+#1088 = ORIENTED_EDGE('',*,*,#1040,.T.);+#1089 = ORIENTED_EDGE('',*,*,#1090,.T.);+#1090 = EDGE_CURVE('',#1021,#1091,#1093,.T.);+#1091 = VERTEX_POINT('',#1092);+#1092 = CARTESIAN_POINT('',(0.8,1.125,0.6));+#1093 = SURFACE_CURVE('',#1094,(#1098,#1105),.PCURVE_S1.);+#1094 = LINE('',#1095,#1096);+#1095 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#1096 = VECTOR('',#1097,1.);+#1097 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1098 = PCURVE('',#409,#1099);+#1099 = DEFINITIONAL_REPRESENTATION('',(#1100),#1104);+#1100 = LINE('',#1101,#1102);+#1101 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1102 = VECTOR('',#1103,1.);+#1103 = DIRECTION('',(-4.08998344385E-17,1.));+#1104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1105 = PCURVE('',#865,#1106);+#1106 = DEFINITIONAL_REPRESENTATION('',(#1107),#1111);+#1107 = LINE('',#1108,#1109);+#1108 = CARTESIAN_POINT('',(0.,0.));+#1109 = VECTOR('',#1110,1.);+#1110 = DIRECTION('',(1.,0.));+#1111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1112 = ORIENTED_EDGE('',*,*,#1113,.T.);+#1113 = EDGE_CURVE('',#1091,#1114,#1116,.T.);+#1114 = VERTEX_POINT('',#1115);+#1115 = CARTESIAN_POINT('',(0.775,1.125,0.6));+#1116 = SURFACE_CURVE('',#1117,(#1121,#1128),.PCURVE_S1.);+#1117 = LINE('',#1118,#1119);+#1118 = CARTESIAN_POINT('',(0.85,1.125,0.6));+#1119 = VECTOR('',#1120,1.);+#1120 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1121 = PCURVE('',#409,#1122);+#1122 = DEFINITIONAL_REPRESENTATION('',(#1123),#1127);+#1123 = LINE('',#1124,#1125);+#1124 = CARTESIAN_POINT('',(0.85,0.3125));+#1125 = VECTOR('',#1126,1.);+#1126 = DIRECTION('',(-1.,-4.08998344385E-17));+#1127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1128 = PCURVE('',#1129,#1134);+#1129 = PLANE('',#1130);+#1130 = AXIS2_PLACEMENT_3D('',#1131,#1132,#1133);+#1131 = CARTESIAN_POINT('',(0.85,1.125,0.6));+#1132 = DIRECTION('',(0.,0.,-1.));+#1133 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#1134 = DEFINITIONAL_REPRESENTATION('',(#1135),#1139);+#1135 = LINE('',#1136,#1137);+#1136 = CARTESIAN_POINT('',(-0.,0.));+#1137 = VECTOR('',#1138,1.);+#1138 = DIRECTION('',(1.,0.));+#1139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1140 = ORIENTED_EDGE('',*,*,#1141,.F.);+#1141 = EDGE_CURVE('',#1142,#1114,#1144,.T.);+#1142 = VERTEX_POINT('',#1143);+#1143 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#1144 = SURFACE_CURVE('',#1145,(#1149,#1156),.PCURVE_S1.); #1145 = LINE('',#1146,#1147);-#1146 = CARTESIAN_POINT('',(0.85,0.2375));+#1146 = CARTESIAN_POINT('',(0.775,1.3425,0.6)); #1147 = VECTOR('',#1148,1.);-#1148 = DIRECTION('',(-1.,-4.08998344385E-17));-#1149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1150 = PCURVE('',#1151,#1156);-#1151 = PLANE('',#1152);-#1152 = AXIS2_PLACEMENT_3D('',#1153,#1154,#1155);-#1153 = CARTESIAN_POINT('',(0.85,1.2,0.9));-#1154 = DIRECTION('',(0.,0.,-1.));-#1155 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));-#1156 = DEFINITIONAL_REPRESENTATION('',(#1157),#1161);-#1157 = LINE('',#1158,#1159);-#1158 = CARTESIAN_POINT('',(-0.,0.));-#1159 = VECTOR('',#1160,1.);-#1160 = DIRECTION('',(1.,0.));-#1161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1162 = ORIENTED_EDGE('',*,*,#1163,.F.);-#1163 = EDGE_CURVE('',#1164,#1136,#1166,.T.);-#1164 = VERTEX_POINT('',#1165);-#1165 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#1166 = SURFACE_CURVE('',#1167,(#1171,#1178),.PCURVE_S1.);-#1167 = LINE('',#1168,#1169);-#1168 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#1169 = VECTOR('',#1170,1.);-#1170 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#1171 = PCURVE('',#431,#1172);-#1172 = DEFINITIONAL_REPRESENTATION('',(#1173),#1177);-#1173 = LINE('',#1174,#1175);-#1174 = CARTESIAN_POINT('',(0.775,9.5E-02));-#1175 = VECTOR('',#1176,1.);-#1176 = DIRECTION('',(-4.08998344385E-17,1.));-#1177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1178 = PCURVE('',#1179,#1184);-#1179 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#1180,#1181)- ,(#1182,#1183+#1148 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1149 = PCURVE('',#409,#1150);+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(0.775,9.5E-02));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-4.08998344385E-17,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = PCURVE('',#1157,#1162);+#1157 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1158,#1159)+ ,(#1160,#1161 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#1180 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#1181 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));-#1182 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));-#1183 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));-#1184 = DEFINITIONAL_REPRESENTATION('',(#1185),#1189);-#1185 = LINE('',#1186,#1187);-#1186 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));-#1187 = VECTOR('',#1188,1.);-#1188 = DIRECTION('',(1.,2.178642469984E-16));-#1189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1190 = ORIENTED_EDGE('',*,*,#1191,.F.);-#1191 = EDGE_CURVE('',#1192,#1164,#1194,.T.);-#1192 = VERTEX_POINT('',#1193);-#1193 = CARTESIAN_POINT('',(0.6925,1.425,0.9));-#1194 = SURFACE_CURVE('',#1195,(#1199,#1206),.PCURVE_S1.);-#1195 = LINE('',#1196,#1197);-#1196 = CARTESIAN_POINT('',(0.6925,1.425,0.9));-#1197 = VECTOR('',#1198,1.);-#1198 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#1199 = PCURVE('',#431,#1200);-#1200 = DEFINITIONAL_REPRESENTATION('',(#1201),#1205);-#1201 = LINE('',#1202,#1203);-#1202 = CARTESIAN_POINT('',(0.6925,1.25E-02));-#1203 = VECTOR('',#1204,1.);-#1204 = DIRECTION('',(0.707106781187,0.707106781187));-#1205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1206 = PCURVE('',#1207,#1212);-#1207 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#1208,#1209)- ,(#1210,#1211+#1158 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#1159 = CARTESIAN_POINT('',(0.725810707854,1.317905353927,0.95));+#1160 = CARTESIAN_POINT('',(0.775,-1.3425,0.6));+#1161 = CARTESIAN_POINT('',(0.725810707854,-1.317905353927,0.95));+#1162 = DEFINITIONAL_REPRESENTATION('',(#1163),#1167);+#1163 = LINE('',#1164,#1165);+#1164 = CARTESIAN_POINT('',(1.099090803126E-16,2.017322039476E-16));+#1165 = VECTOR('',#1166,1.);+#1166 = DIRECTION('',(1.,-6.776394184736E-16));+#1167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1168 = ORIENTED_EDGE('',*,*,#1169,.F.);+#1169 = EDGE_CURVE('',#1170,#1142,#1172,.T.);+#1170 = VERTEX_POINT('',#1171);+#1171 = CARTESIAN_POINT('',(0.6925,1.425,0.6));+#1172 = SURFACE_CURVE('',#1173,(#1177,#1184),.PCURVE_S1.);+#1173 = LINE('',#1174,#1175);+#1174 = CARTESIAN_POINT('',(0.6925,1.425,0.6));+#1175 = VECTOR('',#1176,1.);+#1176 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1177 = PCURVE('',#409,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.6925,1.25E-02));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(0.707106781187,0.707106781187));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = PCURVE('',#1185,#1190);+#1185 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1186,#1187)+ ,(#1188,#1189 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#1208 = CARTESIAN_POINT('',(0.6925,1.425,0.9));-#1209 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));-#1210 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#1211 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));-#1212 = DEFINITIONAL_REPRESENTATION('',(#1213),#1217);-#1213 = LINE('',#1214,#1215);-#1214 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));-#1215 = VECTOR('',#1216,1.);-#1216 = DIRECTION('',(1.,1.674888819215E-19));-#1217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1218 = ORIENTED_EDGE('',*,*,#1219,.F.);-#1219 = EDGE_CURVE('',#1220,#1192,#1222,.T.);-#1220 = VERTEX_POINT('',#1221);-#1221 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));-#1222 = SURFACE_CURVE('',#1223,(#1227,#1234),.PCURVE_S1.);-#1223 = LINE('',#1224,#1225);-#1224 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));-#1225 = VECTOR('',#1226,1.);-#1226 = DIRECTION('',(1.,1.110223024625E-16,0.));-#1227 = PCURVE('',#431,#1228);-#1228 = DEFINITIONAL_REPRESENTATION('',(#1229),#1233);-#1229 = LINE('',#1230,#1231);-#1230 = CARTESIAN_POINT('',(-0.6925,1.25E-02));-#1231 = VECTOR('',#1232,1.);-#1232 = DIRECTION('',(1.,4.08998344385E-17));-#1233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1234 = PCURVE('',#1235,#1240);-#1235 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#1236,#1237)- ,(#1238,#1239+#1186 = CARTESIAN_POINT('',(0.6925,1.425,0.6));+#1187 = CARTESIAN_POINT('',(0.667905353927,1.375810707854,0.95));+#1188 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#1189 = CARTESIAN_POINT('',(0.725810707854,1.317905353927,0.95));+#1190 = DEFINITIONAL_REPRESENTATION('',(#1191),#1195);+#1191 = LINE('',#1192,#1193);+#1192 = CARTESIAN_POINT('',(7.190486470684E-18,-1.362249252212E-17));+#1193 = VECTOR('',#1194,1.);+#1194 = DIRECTION('',(1.,2.801123887969E-16));+#1195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1196 = ORIENTED_EDGE('',*,*,#1197,.F.);+#1197 = EDGE_CURVE('',#1198,#1170,#1200,.T.);+#1198 = VERTEX_POINT('',#1199);+#1199 = CARTESIAN_POINT('',(-0.6925,1.425,0.6));+#1200 = SURFACE_CURVE('',#1201,(#1205,#1212),.PCURVE_S1.);+#1201 = LINE('',#1202,#1203);+#1202 = CARTESIAN_POINT('',(-0.6925,1.425,0.6));+#1203 = VECTOR('',#1204,1.);+#1204 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1205 = PCURVE('',#409,#1206);+#1206 = DEFINITIONAL_REPRESENTATION('',(#1207),#1211);+#1207 = LINE('',#1208,#1209);+#1208 = CARTESIAN_POINT('',(-0.6925,1.25E-02));+#1209 = VECTOR('',#1210,1.);+#1210 = DIRECTION('',(1.,4.08998344385E-17));+#1211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1212 = PCURVE('',#1213,#1218);+#1213 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1214,#1215)+ ,(#1216,#1217 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#1236 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));-#1237 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#1238 = CARTESIAN_POINT('',(0.6925,1.425,0.9));-#1239 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));-#1240 = DEFINITIONAL_REPRESENTATION('',(#1241),#1245);-#1241 = LINE('',#1242,#1243);-#1242 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));-#1243 = VECTOR('',#1244,1.);-#1244 = DIRECTION('',(1.,-6.800608070842E-17));-#1245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1246 = ORIENTED_EDGE('',*,*,#1247,.F.);-#1247 = EDGE_CURVE('',#1248,#1220,#1250,.T.);-#1248 = VERTEX_POINT('',#1249);-#1249 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));-#1250 = SURFACE_CURVE('',#1251,(#1255,#1262),.PCURVE_S1.);-#1251 = LINE('',#1252,#1253);-#1252 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));-#1253 = VECTOR('',#1254,1.);-#1254 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#1255 = PCURVE('',#431,#1256);-#1256 = DEFINITIONAL_REPRESENTATION('',(#1257),#1261);-#1257 = LINE('',#1258,#1259);-#1258 = CARTESIAN_POINT('',(-0.775,9.5E-02));-#1259 = VECTOR('',#1260,1.);-#1260 = DIRECTION('',(0.707106781187,-0.707106781187));-#1261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1262 = PCURVE('',#1263,#1268);-#1263 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#1264,#1265)- ,(#1266,#1267+#1214 = CARTESIAN_POINT('',(-0.6925,1.425,0.6));+#1215 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#1216 = CARTESIAN_POINT('',(0.6925,1.425,0.6));+#1217 = CARTESIAN_POINT('',(0.667905353927,1.375810707854,0.95));+#1218 = DEFINITIONAL_REPRESENTATION('',(#1219),#1223);+#1219 = LINE('',#1220,#1221);+#1220 = CARTESIAN_POINT('',(1.731707792598E-16,1.593979877619E-16));+#1221 = VECTOR('',#1222,1.);+#1222 = DIRECTION('',(1.,-1.263123829481E-16));+#1223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1224 = ORIENTED_EDGE('',*,*,#1225,.F.);+#1225 = EDGE_CURVE('',#1226,#1198,#1228,.T.);+#1226 = VERTEX_POINT('',#1227);+#1227 = CARTESIAN_POINT('',(-0.775,1.3425,0.6));+#1228 = SURFACE_CURVE('',#1229,(#1233,#1240),.PCURVE_S1.);+#1229 = LINE('',#1230,#1231);+#1230 = CARTESIAN_POINT('',(-0.775,1.3425,0.6));+#1231 = VECTOR('',#1232,1.);+#1232 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1233 = PCURVE('',#409,#1234);+#1234 = DEFINITIONAL_REPRESENTATION('',(#1235),#1239);+#1235 = LINE('',#1236,#1237);+#1236 = CARTESIAN_POINT('',(-0.775,9.5E-02));+#1237 = VECTOR('',#1238,1.);+#1238 = DIRECTION('',(0.707106781187,-0.707106781187));+#1239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1240 = PCURVE('',#1241,#1246);+#1241 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1242,#1243)+ ,(#1244,#1245 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#1264 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));-#1265 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));-#1266 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));-#1267 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#1268 = DEFINITIONAL_REPRESENTATION('',(#1269),#1273);-#1269 = LINE('',#1270,#1271);-#1270 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));-#1271 = VECTOR('',#1272,1.);-#1272 = DIRECTION('',(1.,-1.674891034764E-19));-#1273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1274 = ORIENTED_EDGE('',*,*,#1275,.F.);-#1275 = EDGE_CURVE('',#1276,#1248,#1278,.T.);-#1276 = VERTEX_POINT('',#1277);-#1277 = CARTESIAN_POINT('',(-0.775,1.2,0.9));-#1278 = SURFACE_CURVE('',#1279,(#1283,#1290),.PCURVE_S1.);-#1279 = LINE('',#1280,#1281);-#1280 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#1281 = VECTOR('',#1282,1.);-#1282 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1283 = PCURVE('',#431,#1284);-#1284 = DEFINITIONAL_REPRESENTATION('',(#1285),#1289);-#1285 = LINE('',#1286,#1287);-#1286 = CARTESIAN_POINT('',(-0.775,2.78));-#1287 = VECTOR('',#1288,1.);-#1288 = DIRECTION('',(4.08998344385E-17,-1.));-#1289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1290 = PCURVE('',#1291,#1296);-#1291 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#1292,#1293)- ,(#1294,#1295+#1242 = CARTESIAN_POINT('',(-0.775,1.3425,0.6));+#1243 = CARTESIAN_POINT('',(-0.725810707854,1.317905353927,0.95));+#1244 = CARTESIAN_POINT('',(-0.6925,1.425,0.6));+#1245 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#1246 = DEFINITIONAL_REPRESENTATION('',(#1247),#1251);+#1247 = LINE('',#1248,#1249);+#1248 = CARTESIAN_POINT('',(-7.188991775997E-17,1.905895346403E-17));+#1249 = VECTOR('',#1250,1.);+#1250 = DIRECTION('',(1.,-2.8011238924E-16));+#1251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1252 = ORIENTED_EDGE('',*,*,#1253,.F.);+#1253 = EDGE_CURVE('',#1254,#1226,#1256,.T.);+#1254 = VERTEX_POINT('',#1255);+#1255 = CARTESIAN_POINT('',(-0.775,1.125,0.6));+#1256 = SURFACE_CURVE('',#1257,(#1261,#1268),.PCURVE_S1.);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1261 = PCURVE('',#409,#1262);+#1262 = DEFINITIONAL_REPRESENTATION('',(#1263),#1267);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(-0.775,2.78));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(4.08998344385E-17,-1.));+#1267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1268 = PCURVE('',#1269,#1274);+#1269 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1270,#1271)+ ,(#1272,#1273 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#1292 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#1293 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));-#1294 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));-#1295 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));-#1296 = DEFINITIONAL_REPRESENTATION('',(#1297),#1301);-#1297 = LINE('',#1298,#1299);-#1298 = CARTESIAN_POINT('',(0.,4.522763122905E-16));-#1299 = VECTOR('',#1300,1.);-#1300 = DIRECTION('',(1.,-2.173887241661E-16));-#1301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1302 = ORIENTED_EDGE('',*,*,#1303,.F.);-#1303 = EDGE_CURVE('',#1304,#1276,#1306,.T.);-#1304 = VERTEX_POINT('',#1305);-#1305 = CARTESIAN_POINT('',(-0.8,1.2,0.9));-#1306 = SURFACE_CURVE('',#1307,(#1311,#1318),.PCURVE_S1.);-#1307 = LINE('',#1308,#1309);-#1308 = CARTESIAN_POINT('',(-0.85,1.2,0.9));-#1309 = VECTOR('',#1310,1.);-#1310 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#1311 = PCURVE('',#431,#1312);-#1312 = DEFINITIONAL_REPRESENTATION('',(#1313),#1317);-#1313 = LINE('',#1314,#1315);-#1314 = CARTESIAN_POINT('',(-0.85,0.2375));-#1315 = VECTOR('',#1316,1.);-#1316 = DIRECTION('',(1.,1.633645143532E-16));-#1317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1318 = PCURVE('',#1319,#1324);-#1319 = PLANE('',#1320);-#1320 = AXIS2_PLACEMENT_3D('',#1321,#1322,#1323);-#1321 = CARTESIAN_POINT('',(-0.85,0.7,0.9));-#1322 = DIRECTION('',(0.,0.,-1.));-#1323 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#1324 = DEFINITIONAL_REPRESENTATION('',(#1325),#1329);-#1325 = LINE('',#1326,#1327);-#1326 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#1327 = VECTOR('',#1328,1.);-#1328 = DIRECTION('',(1.,0.));-#1329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1330 = ORIENTED_EDGE('',*,*,#1331,.T.);-#1331 = EDGE_CURVE('',#1304,#1088,#1332,.T.);-#1332 = SURFACE_CURVE('',#1333,(#1337,#1344),.PCURVE_S1.);-#1333 = LINE('',#1334,#1335);-#1334 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1335 = VECTOR('',#1336,1.);-#1336 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1337 = PCURVE('',#431,#1338);-#1338 = DEFINITIONAL_REPRESENTATION('',(#1339),#1343);-#1339 = LINE('',#1340,#1341);-#1340 = CARTESIAN_POINT('',(-0.8,2.7925));-#1341 = VECTOR('',#1342,1.);-#1342 = DIRECTION('',(4.08998344385E-17,-1.));-#1343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1344 = PCURVE('',#535,#1345);-#1345 = DEFINITIONAL_REPRESENTATION('',(#1346),#1350);-#1346 = LINE('',#1347,#1348);-#1347 = CARTESIAN_POINT('',(0.,0.));-#1348 = VECTOR('',#1349,1.);-#1349 = DIRECTION('',(1.,0.));-#1350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1351 = ADVANCED_FACE('',(#1352),#455,.F.);-#1352 = FACE_BOUND('',#1353,.F.);-#1353 = EDGE_LOOP('',(#1354,#1355,#1356,#1357));-#1354 = ORIENTED_EDGE('',*,*,#471,.T.);-#1355 = ORIENTED_EDGE('',*,*,#443,.T.);-#1356 = ORIENTED_EDGE('',*,*,#1087,.F.);-#1357 = ORIENTED_EDGE('',*,*,#1358,.F.);-#1358 = EDGE_CURVE('',#472,#1088,#1359,.T.);-#1359 = SURFACE_CURVE('',#1360,(#1363,#1369),.PCURVE_S1.);-#1360 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1361,#1362),.UNSPECIFIED.,.F.,+#1270 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#1271 = CARTESIAN_POINT('',(-0.725810707854,-1.317905353927,0.95));+#1272 = CARTESIAN_POINT('',(-0.775,1.3425,0.6));+#1273 = CARTESIAN_POINT('',(-0.725810707854,1.317905353927,0.95));+#1274 = DEFINITIONAL_REPRESENTATION('',(#1275),#1279);+#1275 = LINE('',#1276,#1277);+#1276 = CARTESIAN_POINT('',(0.,1.958490441718E-15));+#1277 = VECTOR('',#1278,1.);+#1278 = DIRECTION('',(1.,-7.519260680943E-16));+#1279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1280 = ORIENTED_EDGE('',*,*,#1281,.F.);+#1281 = EDGE_CURVE('',#1282,#1254,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(-0.8,1.125,0.6));+#1284 = SURFACE_CURVE('',#1285,(#1289,#1296),.PCURVE_S1.);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(-0.85,1.125,0.6));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1289 = PCURVE('',#409,#1290);+#1290 = DEFINITIONAL_REPRESENTATION('',(#1291),#1295);+#1291 = LINE('',#1292,#1293);+#1292 = CARTESIAN_POINT('',(-0.85,0.3125));+#1293 = VECTOR('',#1294,1.);+#1294 = DIRECTION('',(1.,1.633645143532E-16));+#1295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1296 = PCURVE('',#1297,#1302);+#1297 = PLANE('',#1298);+#1298 = AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);+#1299 = CARTESIAN_POINT('',(-0.85,0.775,0.6));+#1300 = DIRECTION('',(0.,0.,-1.));+#1301 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1302 = DEFINITIONAL_REPRESENTATION('',(#1303),#1307);+#1303 = LINE('',#1304,#1305);+#1304 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#1305 = VECTOR('',#1306,1.);+#1306 = DIRECTION('',(1.,0.));+#1307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1308 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1309 = EDGE_CURVE('',#1282,#1066,#1310,.T.);+#1310 = SURFACE_CURVE('',#1311,(#1315,#1322),.PCURVE_S1.);+#1311 = LINE('',#1312,#1313);+#1312 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1313 = VECTOR('',#1314,1.);+#1314 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1315 = PCURVE('',#409,#1316);+#1316 = DEFINITIONAL_REPRESENTATION('',(#1317),#1321);+#1317 = LINE('',#1318,#1319);+#1318 = CARTESIAN_POINT('',(-0.8,2.7925));+#1319 = VECTOR('',#1320,1.);+#1320 = DIRECTION('',(4.08998344385E-17,-1.));+#1321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1322 = PCURVE('',#513,#1323);+#1323 = DEFINITIONAL_REPRESENTATION('',(#1324),#1328);+#1324 = LINE('',#1325,#1326);+#1325 = CARTESIAN_POINT('',(0.,0.));+#1326 = VECTOR('',#1327,1.);+#1327 = DIRECTION('',(1.,0.));+#1328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1329 = ADVANCED_FACE('',(#1330),#433,.F.);+#1330 = FACE_BOUND('',#1331,.F.);+#1331 = EDGE_LOOP('',(#1332,#1333,#1334,#1335));+#1332 = ORIENTED_EDGE('',*,*,#449,.T.);+#1333 = ORIENTED_EDGE('',*,*,#421,.T.);+#1334 = ORIENTED_EDGE('',*,*,#1065,.F.);+#1335 = ORIENTED_EDGE('',*,*,#1336,.F.);+#1336 = EDGE_CURVE('',#450,#1066,#1337,.T.);+#1337 = SURFACE_CURVE('',#1338,(#1341,#1347),.PCURVE_S1.);+#1338 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1339,#1340),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1361 = CARTESIAN_POINT('',(-0.8,1.355,0.75));-#1362 = CARTESIAN_POINT('',(-0.8,1.355,0.9));-#1363 = PCURVE('',#455,#1364);-#1364 = DEFINITIONAL_REPRESENTATION('',(#1365),#1368);-#1365 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1366,#1367),.UNSPECIFIED.,.F.,+#1339 = CARTESIAN_POINT('',(-0.8,1.355,0.45));+#1340 = CARTESIAN_POINT('',(-0.8,1.355,0.6));+#1341 = PCURVE('',#433,#1342);+#1342 = DEFINITIONAL_REPRESENTATION('',(#1343),#1346);+#1343 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1344,#1345),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1366 = CARTESIAN_POINT('',(0.,-0.15));-#1367 = CARTESIAN_POINT('',(0.,0.));-#1368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#1344 = CARTESIAN_POINT('',(0.,-0.15));+#1345 = CARTESIAN_POINT('',(0.,0.));+#1346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1369 = PCURVE('',#535,#1370);-#1370 = DEFINITIONAL_REPRESENTATION('',(#1371),#1374);-#1371 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1372,#1373),.UNSPECIFIED.,.F.,+#1347 = PCURVE('',#513,#1348);+#1348 = DEFINITIONAL_REPRESENTATION('',(#1349),#1352);+#1349 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1350,#1351),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1372 = CARTESIAN_POINT('',(2.71,-0.15));-#1373 = CARTESIAN_POINT('',(2.71,0.));-#1374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1375 = ADVANCED_FACE('',(#1376),#703,.F.);-#1376 = FACE_BOUND('',#1377,.F.);-#1377 = EDGE_LOOP('',(#1378,#1398,#1399,#1427));-#1378 = ORIENTED_EDGE('',*,*,#1379,.F.);-#1379 = EDGE_CURVE('',#688,#1380,#1382,.T.);-#1380 = VERTEX_POINT('',#1381);-#1381 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1382 = SURFACE_CURVE('',#1383,(#1386,#1392),.PCURVE_S1.);-#1383 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1384,#1385),.UNSPECIFIED.,.F.,+#1350 = CARTESIAN_POINT('',(2.71,-0.15));+#1351 = CARTESIAN_POINT('',(2.71,0.));+#1352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1353 = ADVANCED_FACE('',(#1354),#681,.F.);+#1354 = FACE_BOUND('',#1355,.F.);+#1355 = EDGE_LOOP('',(#1356,#1376,#1377,#1405));+#1356 = ORIENTED_EDGE('',*,*,#1357,.F.);+#1357 = EDGE_CURVE('',#666,#1358,#1360,.T.);+#1358 = VERTEX_POINT('',#1359);+#1359 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1360 = SURFACE_CURVE('',#1361,(#1364,#1370),.PCURVE_S1.);+#1361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1362,#1363),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1384 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));-#1385 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1386 = PCURVE('',#703,#1387);-#1387 = DEFINITIONAL_REPRESENTATION('',(#1388),#1391);-#1388 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1389,#1390),.UNSPECIFIED.,.F.,+#1362 = CARTESIAN_POINT('',(-0.8,-1.355,0.45));+#1363 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1364 = PCURVE('',#681,#1365);+#1365 = DEFINITIONAL_REPRESENTATION('',(#1366),#1369);+#1366 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1367,#1368),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1389 = CARTESIAN_POINT('',(0.,-0.15));-#1390 = CARTESIAN_POINT('',(0.,0.));-#1391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#1367 = CARTESIAN_POINT('',(0.,-0.15));+#1368 = CARTESIAN_POINT('',(0.,0.));+#1369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1392 = PCURVE('',#921,#1393);-#1393 = DEFINITIONAL_REPRESENTATION('',(#1394),#1397);-#1394 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1395,#1396),.UNSPECIFIED.,.F.,+#1370 = PCURVE('',#899,#1371);+#1371 = DEFINITIONAL_REPRESENTATION('',(#1372),#1375);+#1372 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#1373,#1374),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#1395 = CARTESIAN_POINT('',(0.134350288425,-0.15));-#1396 = CARTESIAN_POINT('',(0.134350288425,0.));-#1397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1398 = ORIENTED_EDGE('',*,*,#687,.T.);-#1399 = ORIENTED_EDGE('',*,*,#1400,.T.);-#1400 = EDGE_CURVE('',#660,#1401,#1403,.T.);-#1401 = VERTEX_POINT('',#1402);-#1402 = CARTESIAN_POINT('',(-0.8,-1.2,0.9));-#1403 = SURFACE_CURVE('',#1404,(#1408,#1415),.PCURVE_S1.);-#1404 = LINE('',#1405,#1406);-#1405 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658));-#1406 = VECTOR('',#1407,1.);-#1407 = DIRECTION('',(0.,0.,1.));-#1408 = PCURVE('',#703,#1409);-#1409 = DEFINITIONAL_REPRESENTATION('',(#1410),#1414);-#1410 = LINE('',#1411,#1412);-#1411 = CARTESIAN_POINT('',(0.155,-0.229152182342));-#1412 = VECTOR('',#1413,1.);-#1413 = DIRECTION('',(0.,1.));-#1414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1415 = PCURVE('',#1416,#1421);-#1416 = PLANE('',#1417);-#1417 = AXIS2_PLACEMENT_3D('',#1418,#1419,#1420);-#1418 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315));-#1419 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1420 = DIRECTION('',(0.,-0.,1.));-#1421 = DEFINITIONAL_REPRESENTATION('',(#1422),#1426);-#1422 = LINE('',#1423,#1424);-#1423 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1424 = VECTOR('',#1425,1.);-#1425 = DIRECTION('',(1.,0.));-#1426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1427 = ORIENTED_EDGE('',*,*,#1428,.F.);-#1428 = EDGE_CURVE('',#1380,#1401,#1429,.T.);-#1429 = SURFACE_CURVE('',#1430,(#1434,#1441),.PCURVE_S1.);-#1430 = LINE('',#1431,#1432);-#1431 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1432 = VECTOR('',#1433,1.);-#1433 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1434 = PCURVE('',#703,#1435);-#1435 = DEFINITIONAL_REPRESENTATION('',(#1436),#1440);-#1436 = LINE('',#1437,#1438);-#1437 = CARTESIAN_POINT('',(0.,0.));-#1438 = VECTOR('',#1439,1.);-#1439 = DIRECTION('',(1.,0.));-#1440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1441 = PCURVE('',#1442,#1447);-#1442 = PLANE('',#1443);-#1443 = AXIS2_PLACEMENT_3D('',#1444,#1445,#1446);-#1444 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));-#1445 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));-#1446 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));-#1447 = DEFINITIONAL_REPRESENTATION('',(#1448),#1452);-#1448 = LINE('',#1449,#1450);-#1449 = CARTESIAN_POINT('',(-0.8,2.7925));-#1450 = VECTOR('',#1451,1.);-#1451 = DIRECTION('',(4.08998344385E-17,-1.));-#1452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1453 = ADVANCED_FACE('',(#1454),#675,.F.);-#1454 = FACE_BOUND('',#1455,.F.);-#1455 = EDGE_LOOP('',(#1456,#1479,#1480,#1508));-#1456 = ORIENTED_EDGE('',*,*,#1457,.F.);-#1457 = EDGE_CURVE('',#660,#1458,#1460,.T.);-#1458 = VERTEX_POINT('',#1459);-#1459 = CARTESIAN_POINT('',(-0.85,-1.2,0.75));-#1460 = SURFACE_CURVE('',#1461,(#1465,#1472),.PCURVE_S1.);-#1461 = LINE('',#1462,#1463);-#1462 = CARTESIAN_POINT('',(-0.75,-1.2,0.75));-#1463 = VECTOR('',#1464,1.);-#1464 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1465 = PCURVE('',#675,#1466);-#1466 = DEFINITIONAL_REPRESENTATION('',(#1467),#1471);-#1467 = LINE('',#1468,#1469);-#1468 = CARTESIAN_POINT('',(0.,0.));-#1469 = VECTOR('',#1470,1.);-#1470 = DIRECTION('',(1.,0.));-#1471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1472 = PCURVE('',#1416,#1473);-#1473 = DEFINITIONAL_REPRESENTATION('',(#1474),#1478);-#1474 = LINE('',#1475,#1476);-#1475 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1476 = VECTOR('',#1477,1.);-#1477 = DIRECTION('',(0.,-1.));-#1478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1479 = ORIENTED_EDGE('',*,*,#659,.T.);-#1480 = ORIENTED_EDGE('',*,*,#1481,.T.);-#1481 = EDGE_CURVE('',#632,#1482,#1484,.T.);-#1482 = VERTEX_POINT('',#1483);-#1483 = CARTESIAN_POINT('',(-0.85,-0.7,0.75));-#1484 = SURFACE_CURVE('',#1485,(#1489,#1496),.PCURVE_S1.);-#1485 = LINE('',#1486,#1487);-#1486 = CARTESIAN_POINT('',(-0.75,-0.7,0.75));-#1487 = VECTOR('',#1488,1.);-#1488 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1489 = PCURVE('',#675,#1490);-#1490 = DEFINITIONAL_REPRESENTATION('',(#1491),#1495);-#1491 = LINE('',#1492,#1493);-#1492 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#1493 = VECTOR('',#1494,1.);-#1494 = DIRECTION('',(1.,0.));-#1495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1496 = PCURVE('',#1497,#1502);-#1497 = PLANE('',#1498);-#1498 = AXIS2_PLACEMENT_3D('',#1499,#1500,#1501);-#1499 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315));-#1500 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1501 = DIRECTION('',(0.,-0.,1.));-#1502 = DEFINITIONAL_REPRESENTATION('',(#1503),#1507);-#1503 = LINE('',#1504,#1505);-#1504 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1505 = VECTOR('',#1506,1.);-#1506 = DIRECTION('',(0.,-1.));-#1507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1508 = ORIENTED_EDGE('',*,*,#1509,.F.);-#1509 = EDGE_CURVE('',#1458,#1482,#1510,.T.);-#1510 = SURFACE_CURVE('',#1511,(#1515,#1522),.PCURVE_S1.);-#1511 = LINE('',#1512,#1513);-#1512 = CARTESIAN_POINT('',(-0.85,-1.2,0.75));-#1513 = VECTOR('',#1514,1.);-#1514 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1515 = PCURVE('',#675,#1516);-#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);-#1517 = LINE('',#1518,#1519);-#1518 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));-#1519 = VECTOR('',#1520,1.);-#1520 = DIRECTION('',(0.,-1.));-#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1522 = PCURVE('',#1523,#1528);-#1523 = CYLINDRICAL_SURFACE('',#1524,0.1);-#1524 = AXIS2_PLACEMENT_3D('',#1525,#1526,#1527);-#1525 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));-#1526 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#1527 = DIRECTION('',(0.,0.,1.));-#1528 = DEFINITIONAL_REPRESENTATION('',(#1529),#1533);-#1529 = LINE('',#1530,#1531);-#1530 = CARTESIAN_POINT('',(0.,0.));-#1531 = VECTOR('',#1532,1.);-#1532 = DIRECTION('',(0.,-1.));-#1533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1534 = ADVANCED_FACE('',(#1535),#647,.F.);-#1535 = FACE_BOUND('',#1536,.F.);-#1536 = EDGE_LOOP('',(#1537,#1560,#1561,#1589));-#1537 = ORIENTED_EDGE('',*,*,#1538,.F.);-#1538 = EDGE_CURVE('',#632,#1539,#1541,.T.);-#1539 = VERTEX_POINT('',#1540);-#1540 = CARTESIAN_POINT('',(-0.8,-0.7,0.9));-#1541 = SURFACE_CURVE('',#1542,(#1546,#1553),.PCURVE_S1.);-#1542 = LINE('',#1543,#1544);-#1543 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658));-#1544 = VECTOR('',#1545,1.);-#1545 = DIRECTION('',(0.,0.,1.));-#1546 = PCURVE('',#647,#1547);-#1547 = DEFINITIONAL_REPRESENTATION('',(#1548),#1552);-#1548 = LINE('',#1549,#1550);-#1549 = CARTESIAN_POINT('',(0.655,-0.229152182342));-#1550 = VECTOR('',#1551,1.);-#1551 = DIRECTION('',(0.,1.));-#1552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1553 = PCURVE('',#1497,#1554);-#1554 = DEFINITIONAL_REPRESENTATION('',(#1555),#1559);-#1555 = LINE('',#1556,#1557);-#1556 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1557 = VECTOR('',#1558,1.);-#1558 = DIRECTION('',(1.,0.));-#1559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1560 = ORIENTED_EDGE('',*,*,#631,.T.);-#1561 = ORIENTED_EDGE('',*,*,#1562,.T.);-#1562 = EDGE_CURVE('',#604,#1563,#1565,.T.);-#1563 = VERTEX_POINT('',#1564);-#1564 = CARTESIAN_POINT('',(-0.8,-0.25,0.9));-#1565 = SURFACE_CURVE('',#1566,(#1570,#1577),.PCURVE_S1.);-#1566 = LINE('',#1567,#1568);-#1567 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658));-#1568 = VECTOR('',#1569,1.);-#1569 = DIRECTION('',(0.,0.,1.));-#1570 = PCURVE('',#647,#1571);-#1571 = DEFINITIONAL_REPRESENTATION('',(#1572),#1576);-#1572 = LINE('',#1573,#1574);-#1573 = CARTESIAN_POINT('',(1.105,-0.229152182342));-#1574 = VECTOR('',#1575,1.);-#1575 = DIRECTION('',(0.,1.));-#1576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1577 = PCURVE('',#1578,#1583);-#1578 = PLANE('',#1579);-#1579 = AXIS2_PLACEMENT_3D('',#1580,#1581,#1582);-#1580 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315));-#1581 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1582 = DIRECTION('',(0.,-0.,1.));-#1583 = DEFINITIONAL_REPRESENTATION('',(#1584),#1588);-#1584 = LINE('',#1585,#1586);-#1585 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1586 = VECTOR('',#1587,1.);-#1587 = DIRECTION('',(1.,0.));-#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1589 = ORIENTED_EDGE('',*,*,#1590,.F.);-#1590 = EDGE_CURVE('',#1539,#1563,#1591,.T.);-#1591 = SURFACE_CURVE('',#1592,(#1596,#1603),.PCURVE_S1.);-#1592 = LINE('',#1593,#1594);-#1593 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1594 = VECTOR('',#1595,1.);-#1595 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1596 = PCURVE('',#647,#1597);-#1597 = DEFINITIONAL_REPRESENTATION('',(#1598),#1602);-#1598 = LINE('',#1599,#1600);-#1599 = CARTESIAN_POINT('',(0.,0.));-#1600 = VECTOR('',#1601,1.);-#1601 = DIRECTION('',(1.,0.));-#1602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1603 = PCURVE('',#1604,#1609);-#1604 = PLANE('',#1605);-#1605 = AXIS2_PLACEMENT_3D('',#1606,#1607,#1608);-#1606 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));-#1607 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));-#1608 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));-#1609 = DEFINITIONAL_REPRESENTATION('',(#1610),#1614);-#1610 = LINE('',#1611,#1612);-#1611 = CARTESIAN_POINT('',(-0.8,2.7925));-#1612 = VECTOR('',#1613,1.);-#1613 = DIRECTION('',(4.08998344385E-17,-1.));-#1614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1615 = ADVANCED_FACE('',(#1616),#619,.F.);-#1616 = FACE_BOUND('',#1617,.F.);-#1617 = EDGE_LOOP('',(#1618,#1641,#1642,#1670));-#1618 = ORIENTED_EDGE('',*,*,#1619,.F.);-#1619 = EDGE_CURVE('',#604,#1620,#1622,.T.);-#1620 = VERTEX_POINT('',#1621);-#1621 = CARTESIAN_POINT('',(-0.85,-0.25,0.75));-#1622 = SURFACE_CURVE('',#1623,(#1627,#1634),.PCURVE_S1.);-#1623 = LINE('',#1624,#1625);-#1624 = CARTESIAN_POINT('',(-0.75,-0.25,0.75));-#1625 = VECTOR('',#1626,1.);-#1626 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1627 = PCURVE('',#619,#1628);-#1628 = DEFINITIONAL_REPRESENTATION('',(#1629),#1633);-#1629 = LINE('',#1630,#1631);-#1630 = CARTESIAN_POINT('',(0.,0.));-#1631 = VECTOR('',#1632,1.);-#1632 = DIRECTION('',(1.,0.));-#1633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1634 = PCURVE('',#1578,#1635);-#1635 = DEFINITIONAL_REPRESENTATION('',(#1636),#1640);-#1636 = LINE('',#1637,#1638);-#1637 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1638 = VECTOR('',#1639,1.);-#1639 = DIRECTION('',(0.,-1.));-#1640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1641 = ORIENTED_EDGE('',*,*,#603,.T.);-#1642 = ORIENTED_EDGE('',*,*,#1643,.T.);-#1643 = EDGE_CURVE('',#576,#1644,#1646,.T.);-#1644 = VERTEX_POINT('',#1645);-#1645 = CARTESIAN_POINT('',(-0.85,0.25,0.75));-#1646 = SURFACE_CURVE('',#1647,(#1651,#1658),.PCURVE_S1.);-#1647 = LINE('',#1648,#1649);-#1648 = CARTESIAN_POINT('',(-0.75,0.25,0.75));-#1649 = VECTOR('',#1650,1.);-#1650 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1651 = PCURVE('',#619,#1652);-#1652 = DEFINITIONAL_REPRESENTATION('',(#1653),#1657);-#1653 = LINE('',#1654,#1655);-#1654 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#1655 = VECTOR('',#1656,1.);-#1656 = DIRECTION('',(1.,0.));-#1657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1658 = PCURVE('',#1659,#1664);-#1659 = PLANE('',#1660);-#1660 = AXIS2_PLACEMENT_3D('',#1661,#1662,#1663);-#1661 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315));-#1662 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1663 = DIRECTION('',(0.,-0.,1.));-#1664 = DEFINITIONAL_REPRESENTATION('',(#1665),#1669);-#1665 = LINE('',#1666,#1667);-#1666 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1667 = VECTOR('',#1668,1.);-#1668 = DIRECTION('',(0.,-1.));-#1669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1670 = ORIENTED_EDGE('',*,*,#1671,.F.);-#1671 = EDGE_CURVE('',#1620,#1644,#1672,.T.);-#1672 = SURFACE_CURVE('',#1673,(#1677,#1684),.PCURVE_S1.);-#1673 = LINE('',#1674,#1675);-#1674 = CARTESIAN_POINT('',(-0.85,-0.25,0.75));-#1675 = VECTOR('',#1676,1.);-#1676 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1677 = PCURVE('',#619,#1678);-#1678 = DEFINITIONAL_REPRESENTATION('',(#1679),#1683);-#1679 = LINE('',#1680,#1681);-#1680 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));-#1681 = VECTOR('',#1682,1.);-#1682 = DIRECTION('',(0.,-1.));-#1683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1684 = PCURVE('',#1685,#1690);-#1685 = CYLINDRICAL_SURFACE('',#1686,0.1);-#1686 = AXIS2_PLACEMENT_3D('',#1687,#1688,#1689);-#1687 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));-#1688 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#1689 = DIRECTION('',(0.,0.,1.));-#1690 = DEFINITIONAL_REPRESENTATION('',(#1691),#1695);-#1691 = LINE('',#1692,#1693);-#1692 = CARTESIAN_POINT('',(0.,0.));-#1693 = VECTOR('',#1694,1.);-#1694 = DIRECTION('',(0.,-1.));-#1695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1696 = ADVANCED_FACE('',(#1697),#591,.F.);-#1697 = FACE_BOUND('',#1698,.F.);-#1698 = EDGE_LOOP('',(#1699,#1722,#1723,#1751));-#1699 = ORIENTED_EDGE('',*,*,#1700,.F.);-#1700 = EDGE_CURVE('',#576,#1701,#1703,.T.);-#1701 = VERTEX_POINT('',#1702);-#1702 = CARTESIAN_POINT('',(-0.8,0.25,0.9));-#1703 = SURFACE_CURVE('',#1704,(#1708,#1715),.PCURVE_S1.);-#1704 = LINE('',#1705,#1706);-#1705 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658));-#1706 = VECTOR('',#1707,1.);-#1707 = DIRECTION('',(0.,0.,1.));-#1708 = PCURVE('',#591,#1709);-#1709 = DEFINITIONAL_REPRESENTATION('',(#1710),#1714);-#1710 = LINE('',#1711,#1712);-#1711 = CARTESIAN_POINT('',(1.605,-0.229152182342));-#1712 = VECTOR('',#1713,1.);-#1713 = DIRECTION('',(0.,1.));-#1714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1715 = PCURVE('',#1659,#1716);-#1716 = DEFINITIONAL_REPRESENTATION('',(#1717),#1721);-#1717 = LINE('',#1718,#1719);-#1718 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1719 = VECTOR('',#1720,1.);-#1720 = DIRECTION('',(1.,0.));-#1721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1722 = ORIENTED_EDGE('',*,*,#575,.T.);-#1723 = ORIENTED_EDGE('',*,*,#1724,.T.);-#1724 = EDGE_CURVE('',#548,#1725,#1727,.T.);-#1725 = VERTEX_POINT('',#1726);-#1726 = CARTESIAN_POINT('',(-0.8,0.7,0.9));-#1727 = SURFACE_CURVE('',#1728,(#1732,#1739),.PCURVE_S1.);-#1728 = LINE('',#1729,#1730);-#1729 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658));-#1730 = VECTOR('',#1731,1.);-#1731 = DIRECTION('',(0.,0.,1.));-#1732 = PCURVE('',#591,#1733);-#1733 = DEFINITIONAL_REPRESENTATION('',(#1734),#1738);-#1734 = LINE('',#1735,#1736);-#1735 = CARTESIAN_POINT('',(2.055,-0.229152182342));-#1736 = VECTOR('',#1737,1.);-#1737 = DIRECTION('',(0.,1.));-#1738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1739 = PCURVE('',#1740,#1745);-#1740 = PLANE('',#1741);-#1741 = AXIS2_PLACEMENT_3D('',#1742,#1743,#1744);-#1742 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315));-#1743 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1744 = DIRECTION('',(0.,-0.,1.));-#1745 = DEFINITIONAL_REPRESENTATION('',(#1746),#1750);-#1746 = LINE('',#1747,#1748);-#1747 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1748 = VECTOR('',#1749,1.);-#1749 = DIRECTION('',(1.,0.));-#1750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1751 = ORIENTED_EDGE('',*,*,#1752,.F.);-#1752 = EDGE_CURVE('',#1701,#1725,#1753,.T.);-#1753 = SURFACE_CURVE('',#1754,(#1758,#1765),.PCURVE_S1.);-#1754 = LINE('',#1755,#1756);-#1755 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));-#1756 = VECTOR('',#1757,1.);-#1757 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1758 = PCURVE('',#591,#1759);-#1759 = DEFINITIONAL_REPRESENTATION('',(#1760),#1764);-#1760 = LINE('',#1761,#1762);-#1761 = CARTESIAN_POINT('',(0.,0.));-#1762 = VECTOR('',#1763,1.);-#1763 = DIRECTION('',(1.,0.));-#1764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1765 = PCURVE('',#1766,#1771);-#1766 = PLANE('',#1767);-#1767 = AXIS2_PLACEMENT_3D('',#1768,#1769,#1770);-#1768 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));-#1769 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));-#1770 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));-#1771 = DEFINITIONAL_REPRESENTATION('',(#1772),#1776);-#1772 = LINE('',#1773,#1774);-#1773 = CARTESIAN_POINT('',(-0.8,2.7925));-#1774 = VECTOR('',#1775,1.);-#1775 = DIRECTION('',(4.08998344385E-17,-1.));-#1776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1777 = ADVANCED_FACE('',(#1778),#563,.F.);-#1778 = FACE_BOUND('',#1779,.F.);-#1779 = EDGE_LOOP('',(#1780,#1803,#1804,#1832));-#1780 = ORIENTED_EDGE('',*,*,#1781,.F.);-#1781 = EDGE_CURVE('',#548,#1782,#1784,.T.);-#1782 = VERTEX_POINT('',#1783);-#1783 = CARTESIAN_POINT('',(-0.85,0.7,0.75));-#1784 = SURFACE_CURVE('',#1785,(#1789,#1796),.PCURVE_S1.);-#1785 = LINE('',#1786,#1787);-#1786 = CARTESIAN_POINT('',(-0.75,0.7,0.75));-#1787 = VECTOR('',#1788,1.);-#1788 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1789 = PCURVE('',#563,#1790);-#1790 = DEFINITIONAL_REPRESENTATION('',(#1791),#1795);-#1791 = LINE('',#1792,#1793);-#1792 = CARTESIAN_POINT('',(0.,0.));-#1793 = VECTOR('',#1794,1.);-#1794 = DIRECTION('',(1.,0.));-#1795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1796 = PCURVE('',#1740,#1797);-#1797 = DEFINITIONAL_REPRESENTATION('',(#1798),#1802);-#1798 = LINE('',#1799,#1800);-#1799 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1800 = VECTOR('',#1801,1.);-#1801 = DIRECTION('',(0.,-1.));-#1802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1803 = ORIENTED_EDGE('',*,*,#547,.T.);-#1804 = ORIENTED_EDGE('',*,*,#1805,.T.);-#1805 = EDGE_CURVE('',#520,#1806,#1808,.T.);-#1806 = VERTEX_POINT('',#1807);-#1807 = CARTESIAN_POINT('',(-0.85,1.2,0.75));-#1808 = SURFACE_CURVE('',#1809,(#1813,#1820),.PCURVE_S1.);-#1809 = LINE('',#1810,#1811);-#1810 = CARTESIAN_POINT('',(-0.75,1.2,0.75));-#1811 = VECTOR('',#1812,1.);-#1812 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#1813 = PCURVE('',#563,#1814);-#1814 = DEFINITIONAL_REPRESENTATION('',(#1815),#1819);-#1815 = LINE('',#1816,#1817);-#1816 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#1817 = VECTOR('',#1818,1.);-#1818 = DIRECTION('',(1.,0.));-#1819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1820 = PCURVE('',#1821,#1826);-#1821 = PLANE('',#1822);-#1822 = AXIS2_PLACEMENT_3D('',#1823,#1824,#1825);-#1823 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315));-#1824 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1825 = DIRECTION('',(0.,-0.,1.));-#1826 = DEFINITIONAL_REPRESENTATION('',(#1827),#1831);-#1827 = LINE('',#1828,#1829);-#1828 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1829 = VECTOR('',#1830,1.);-#1830 = DIRECTION('',(0.,-1.));-#1831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1832 = ORIENTED_EDGE('',*,*,#1833,.F.);-#1833 = EDGE_CURVE('',#1782,#1806,#1834,.T.);-#1834 = SURFACE_CURVE('',#1835,(#1839,#1846),.PCURVE_S1.);-#1835 = LINE('',#1836,#1837);-#1836 = CARTESIAN_POINT('',(-0.85,0.7,0.75));-#1837 = VECTOR('',#1838,1.);-#1838 = DIRECTION('',(1.144237745222E-17,1.,0.));-#1839 = PCURVE('',#563,#1840);-#1840 = DEFINITIONAL_REPRESENTATION('',(#1841),#1845);-#1841 = LINE('',#1842,#1843);-#1842 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));-#1843 = VECTOR('',#1844,1.);-#1844 = DIRECTION('',(0.,-1.));-#1845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1846 = PCURVE('',#1847,#1852);-#1847 = CYLINDRICAL_SURFACE('',#1848,0.1);-#1848 = AXIS2_PLACEMENT_3D('',#1849,#1850,#1851);-#1849 = CARTESIAN_POINT('',(-0.85,0.7,0.65));-#1850 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#1851 = DIRECTION('',(0.,0.,1.));-#1852 = DEFINITIONAL_REPRESENTATION('',(#1853),#1857);-#1853 = LINE('',#1854,#1855);-#1854 = CARTESIAN_POINT('',(0.,0.));-#1855 = VECTOR('',#1856,1.);-#1856 = DIRECTION('',(0.,-1.));-#1857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1858 = ADVANCED_FACE('',(#1859),#535,.F.);-#1859 = FACE_BOUND('',#1860,.F.);-#1860 = EDGE_LOOP('',(#1861,#1882,#1883,#1884));-#1861 = ORIENTED_EDGE('',*,*,#1862,.F.);-#1862 = EDGE_CURVE('',#520,#1304,#1863,.T.);-#1863 = SURFACE_CURVE('',#1864,(#1868,#1875),.PCURVE_S1.);-#1864 = LINE('',#1865,#1866);-#1865 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658));-#1866 = VECTOR('',#1867,1.);-#1867 = DIRECTION('',(0.,0.,1.));-#1868 = PCURVE('',#535,#1869);-#1869 = DEFINITIONAL_REPRESENTATION('',(#1870),#1874);-#1870 = LINE('',#1871,#1872);-#1871 = CARTESIAN_POINT('',(2.555,-0.229152182342));-#1872 = VECTOR('',#1873,1.);-#1873 = DIRECTION('',(0.,1.));-#1874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1875 = PCURVE('',#1821,#1876);+#1373 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#1374 = CARTESIAN_POINT('',(0.134350288425,0.));+#1375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1376 = ORIENTED_EDGE('',*,*,#665,.T.);+#1377 = ORIENTED_EDGE('',*,*,#1378,.T.);+#1378 = EDGE_CURVE('',#638,#1379,#1381,.T.);+#1379 = VERTEX_POINT('',#1380);+#1380 = CARTESIAN_POINT('',(-0.8,-1.125,0.6));+#1381 = SURFACE_CURVE('',#1382,(#1386,#1393),.PCURVE_S1.);+#1382 = LINE('',#1383,#1384);+#1383 = CARTESIAN_POINT('',(-0.8,-1.125,0.441412655976));+#1384 = VECTOR('',#1385,1.);+#1385 = DIRECTION('',(0.,0.,1.));+#1386 = PCURVE('',#681,#1387);+#1387 = DEFINITIONAL_REPRESENTATION('',(#1388),#1392);+#1388 = LINE('',#1389,#1390);+#1389 = CARTESIAN_POINT('',(0.23,-0.158587344024));+#1390 = VECTOR('',#1391,1.);+#1391 = DIRECTION('',(0.,1.));+#1392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1393 = PCURVE('',#1394,#1399);+#1394 = PLANE('',#1395);+#1395 = AXIS2_PLACEMENT_3D('',#1396,#1397,#1398);+#1396 = CARTESIAN_POINT('',(-1.064349127789,-1.125,0.282825311951));+#1397 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1398 = DIRECTION('',(0.,-0.,1.));+#1399 = DEFINITIONAL_REPRESENTATION('',(#1400),#1404);+#1400 = LINE('',#1401,#1402);+#1401 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1402 = VECTOR('',#1403,1.);+#1403 = DIRECTION('',(1.,0.));+#1404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1405 = ORIENTED_EDGE('',*,*,#1406,.F.);+#1406 = EDGE_CURVE('',#1358,#1379,#1407,.T.);+#1407 = SURFACE_CURVE('',#1408,(#1412,#1419),.PCURVE_S1.);+#1408 = LINE('',#1409,#1410);+#1409 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1410 = VECTOR('',#1411,1.);+#1411 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1412 = PCURVE('',#681,#1413);+#1413 = DEFINITIONAL_REPRESENTATION('',(#1414),#1418);+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(0.,0.));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(1.,0.));+#1418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1419 = PCURVE('',#1420,#1425);+#1420 = PLANE('',#1421);+#1421 = AXIS2_PLACEMENT_3D('',#1422,#1423,#1424);+#1422 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.6));+#1423 = DIRECTION('',(2.888762391192E-17,8.634073551009E-28,-1.));+#1424 = DIRECTION('',(1.,1.51922136901E-16,2.888762391192E-17));+#1425 = DEFINITIONAL_REPRESENTATION('',(#1426),#1430);+#1426 = LINE('',#1427,#1428);+#1427 = CARTESIAN_POINT('',(-0.8,2.7925));+#1428 = VECTOR('',#1429,1.);+#1429 = DIRECTION('',(4.08998344385E-17,-1.));+#1430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1431 = ADVANCED_FACE('',(#1432),#653,.F.);+#1432 = FACE_BOUND('',#1433,.F.);+#1433 = EDGE_LOOP('',(#1434,#1457,#1458,#1486));+#1434 = ORIENTED_EDGE('',*,*,#1435,.F.);+#1435 = EDGE_CURVE('',#638,#1436,#1438,.T.);+#1436 = VERTEX_POINT('',#1437);+#1437 = CARTESIAN_POINT('',(-0.85,-1.125,0.45));+#1438 = SURFACE_CURVE('',#1439,(#1443,#1450),.PCURVE_S1.);+#1439 = LINE('',#1440,#1441);+#1440 = CARTESIAN_POINT('',(-0.75,-1.125,0.45));+#1441 = VECTOR('',#1442,1.);+#1442 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1443 = PCURVE('',#653,#1444);+#1444 = DEFINITIONAL_REPRESENTATION('',(#1445),#1449);+#1445 = LINE('',#1446,#1447);+#1446 = CARTESIAN_POINT('',(0.,0.));+#1447 = VECTOR('',#1448,1.);+#1448 = DIRECTION('',(1.,0.));+#1449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1450 = PCURVE('',#1394,#1451);+#1451 = DEFINITIONAL_REPRESENTATION('',(#1452),#1456);+#1452 = LINE('',#1453,#1454);+#1453 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1454 = VECTOR('',#1455,1.);+#1455 = DIRECTION('',(0.,-1.));+#1456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1457 = ORIENTED_EDGE('',*,*,#637,.T.);+#1458 = ORIENTED_EDGE('',*,*,#1459,.T.);+#1459 = EDGE_CURVE('',#610,#1460,#1462,.T.);+#1460 = VERTEX_POINT('',#1461);+#1461 = CARTESIAN_POINT('',(-0.85,-0.775,0.45));+#1462 = SURFACE_CURVE('',#1463,(#1467,#1474),.PCURVE_S1.);+#1463 = LINE('',#1464,#1465);+#1464 = CARTESIAN_POINT('',(-0.75,-0.775,0.45));+#1465 = VECTOR('',#1466,1.);+#1466 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1467 = PCURVE('',#653,#1468);+#1468 = DEFINITIONAL_REPRESENTATION('',(#1469),#1473);+#1469 = LINE('',#1470,#1471);+#1470 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#1471 = VECTOR('',#1472,1.);+#1472 = DIRECTION('',(1.,0.));+#1473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1474 = PCURVE('',#1475,#1480);+#1475 = PLANE('',#1476);+#1476 = AXIS2_PLACEMENT_3D('',#1477,#1478,#1479);+#1477 = CARTESIAN_POINT('',(-1.064349127789,-0.775,0.282825311951));+#1478 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1479 = DIRECTION('',(0.,-0.,1.));+#1480 = DEFINITIONAL_REPRESENTATION('',(#1481),#1485);+#1481 = LINE('',#1482,#1483);+#1482 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1483 = VECTOR('',#1484,1.);+#1484 = DIRECTION('',(0.,-1.));+#1485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1486 = ORIENTED_EDGE('',*,*,#1487,.F.);+#1487 = EDGE_CURVE('',#1436,#1460,#1488,.T.);+#1488 = SURFACE_CURVE('',#1489,(#1493,#1500),.PCURVE_S1.);+#1489 = LINE('',#1490,#1491);+#1490 = CARTESIAN_POINT('',(-0.85,-1.125,0.45));+#1491 = VECTOR('',#1492,1.);+#1492 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1493 = PCURVE('',#653,#1494);+#1494 = DEFINITIONAL_REPRESENTATION('',(#1495),#1499);+#1495 = LINE('',#1496,#1497);+#1496 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#1497 = VECTOR('',#1498,1.);+#1498 = DIRECTION('',(0.,-1.));+#1499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1500 = PCURVE('',#1501,#1506);+#1501 = CYLINDRICAL_SURFACE('',#1502,0.1);+#1502 = AXIS2_PLACEMENT_3D('',#1503,#1504,#1505);+#1503 = CARTESIAN_POINT('',(-0.85,-1.125,0.35));+#1504 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1505 = DIRECTION('',(0.,0.,1.));+#1506 = DEFINITIONAL_REPRESENTATION('',(#1507),#1511);+#1507 = LINE('',#1508,#1509);+#1508 = CARTESIAN_POINT('',(0.,0.));+#1509 = VECTOR('',#1510,1.);+#1510 = DIRECTION('',(0.,-1.));+#1511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1512 = ADVANCED_FACE('',(#1513),#625,.F.);+#1513 = FACE_BOUND('',#1514,.F.);+#1514 = EDGE_LOOP('',(#1515,#1538,#1539,#1567));+#1515 = ORIENTED_EDGE('',*,*,#1516,.F.);+#1516 = EDGE_CURVE('',#610,#1517,#1519,.T.);+#1517 = VERTEX_POINT('',#1518);+#1518 = CARTESIAN_POINT('',(-0.8,-0.775,0.6));+#1519 = SURFACE_CURVE('',#1520,(#1524,#1531),.PCURVE_S1.);+#1520 = LINE('',#1521,#1522);+#1521 = CARTESIAN_POINT('',(-0.8,-0.775,0.441412655976));+#1522 = VECTOR('',#1523,1.);+#1523 = DIRECTION('',(0.,0.,1.));+#1524 = PCURVE('',#625,#1525);+#1525 = DEFINITIONAL_REPRESENTATION('',(#1526),#1530);+#1526 = LINE('',#1527,#1528);+#1527 = CARTESIAN_POINT('',(0.58,-0.158587344024));+#1528 = VECTOR('',#1529,1.);+#1529 = DIRECTION('',(0.,1.));+#1530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1531 = PCURVE('',#1475,#1532);+#1532 = DEFINITIONAL_REPRESENTATION('',(#1533),#1537);+#1533 = LINE('',#1534,#1535);+#1534 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1535 = VECTOR('',#1536,1.);+#1536 = DIRECTION('',(1.,0.));+#1537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1538 = ORIENTED_EDGE('',*,*,#609,.T.);+#1539 = ORIENTED_EDGE('',*,*,#1540,.T.);+#1540 = EDGE_CURVE('',#582,#1541,#1543,.T.);+#1541 = VERTEX_POINT('',#1542);+#1542 = CARTESIAN_POINT('',(-0.8,-0.175,0.6));+#1543 = SURFACE_CURVE('',#1544,(#1548,#1555),.PCURVE_S1.);+#1544 = LINE('',#1545,#1546);+#1545 = CARTESIAN_POINT('',(-0.8,-0.175,0.441412655976));+#1546 = VECTOR('',#1547,1.);+#1547 = DIRECTION('',(0.,0.,1.));+#1548 = PCURVE('',#625,#1549);+#1549 = DEFINITIONAL_REPRESENTATION('',(#1550),#1554);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(1.18,-0.158587344024));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(0.,1.));+#1554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1555 = PCURVE('',#1556,#1561);+#1556 = PLANE('',#1557);+#1557 = AXIS2_PLACEMENT_3D('',#1558,#1559,#1560);+#1558 = CARTESIAN_POINT('',(-1.064349127789,-0.175,0.282825311951));+#1559 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1560 = DIRECTION('',(0.,-0.,1.));+#1561 = DEFINITIONAL_REPRESENTATION('',(#1562),#1566);+#1562 = LINE('',#1563,#1564);+#1563 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1564 = VECTOR('',#1565,1.);+#1565 = DIRECTION('',(1.,0.));+#1566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1567 = ORIENTED_EDGE('',*,*,#1568,.F.);+#1568 = EDGE_CURVE('',#1517,#1541,#1569,.T.);+#1569 = SURFACE_CURVE('',#1570,(#1574,#1581),.PCURVE_S1.);+#1570 = LINE('',#1571,#1572);+#1571 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1572 = VECTOR('',#1573,1.);+#1573 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1574 = PCURVE('',#625,#1575);+#1575 = DEFINITIONAL_REPRESENTATION('',(#1576),#1580);+#1576 = LINE('',#1577,#1578);+#1577 = CARTESIAN_POINT('',(0.,0.));+#1578 = VECTOR('',#1579,1.);+#1579 = DIRECTION('',(1.,0.));+#1580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1581 = PCURVE('',#1582,#1587);+#1582 = PLANE('',#1583);+#1583 = AXIS2_PLACEMENT_3D('',#1584,#1585,#1586);+#1584 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.6));+#1585 = DIRECTION('',(2.888762391192E-17,8.634073551009E-28,-1.));+#1586 = DIRECTION('',(1.,1.51922136901E-16,2.888762391192E-17));+#1587 = DEFINITIONAL_REPRESENTATION('',(#1588),#1592);+#1588 = LINE('',#1589,#1590);+#1589 = CARTESIAN_POINT('',(-0.8,2.7925));+#1590 = VECTOR('',#1591,1.);+#1591 = DIRECTION('',(4.08998344385E-17,-1.));+#1592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1593 = ADVANCED_FACE('',(#1594),#597,.F.);+#1594 = FACE_BOUND('',#1595,.F.);+#1595 = EDGE_LOOP('',(#1596,#1619,#1620,#1648));+#1596 = ORIENTED_EDGE('',*,*,#1597,.F.);+#1597 = EDGE_CURVE('',#582,#1598,#1600,.T.);+#1598 = VERTEX_POINT('',#1599);+#1599 = CARTESIAN_POINT('',(-0.85,-0.175,0.45));+#1600 = SURFACE_CURVE('',#1601,(#1605,#1612),.PCURVE_S1.);+#1601 = LINE('',#1602,#1603);+#1602 = CARTESIAN_POINT('',(-0.75,-0.175,0.45));+#1603 = VECTOR('',#1604,1.);+#1604 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1605 = PCURVE('',#597,#1606);+#1606 = DEFINITIONAL_REPRESENTATION('',(#1607),#1611);+#1607 = LINE('',#1608,#1609);+#1608 = CARTESIAN_POINT('',(0.,0.));+#1609 = VECTOR('',#1610,1.);+#1610 = DIRECTION('',(1.,0.));+#1611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1612 = PCURVE('',#1556,#1613);+#1613 = DEFINITIONAL_REPRESENTATION('',(#1614),#1618);+#1614 = LINE('',#1615,#1616);+#1615 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1616 = VECTOR('',#1617,1.);+#1617 = DIRECTION('',(0.,-1.));+#1618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1619 = ORIENTED_EDGE('',*,*,#581,.T.);+#1620 = ORIENTED_EDGE('',*,*,#1621,.T.);+#1621 = EDGE_CURVE('',#554,#1622,#1624,.T.);+#1622 = VERTEX_POINT('',#1623);+#1623 = CARTESIAN_POINT('',(-0.85,0.175,0.45));+#1624 = SURFACE_CURVE('',#1625,(#1629,#1636),.PCURVE_S1.);+#1625 = LINE('',#1626,#1627);+#1626 = CARTESIAN_POINT('',(-0.75,0.175,0.45));+#1627 = VECTOR('',#1628,1.);+#1628 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1629 = PCURVE('',#597,#1630);+#1630 = DEFINITIONAL_REPRESENTATION('',(#1631),#1635);+#1631 = LINE('',#1632,#1633);+#1632 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#1633 = VECTOR('',#1634,1.);+#1634 = DIRECTION('',(1.,0.));+#1635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1636 = PCURVE('',#1637,#1642);+#1637 = PLANE('',#1638);+#1638 = AXIS2_PLACEMENT_3D('',#1639,#1640,#1641);+#1639 = CARTESIAN_POINT('',(-1.064349127789,0.175,0.282825311951));+#1640 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1641 = DIRECTION('',(0.,-0.,1.));+#1642 = DEFINITIONAL_REPRESENTATION('',(#1643),#1647);+#1643 = LINE('',#1644,#1645);+#1644 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1645 = VECTOR('',#1646,1.);+#1646 = DIRECTION('',(0.,-1.));+#1647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1648 = ORIENTED_EDGE('',*,*,#1649,.F.);+#1649 = EDGE_CURVE('',#1598,#1622,#1650,.T.);+#1650 = SURFACE_CURVE('',#1651,(#1655,#1662),.PCURVE_S1.);+#1651 = LINE('',#1652,#1653);+#1652 = CARTESIAN_POINT('',(-0.85,-0.175,0.45));+#1653 = VECTOR('',#1654,1.);+#1654 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1655 = PCURVE('',#597,#1656);+#1656 = DEFINITIONAL_REPRESENTATION('',(#1657),#1661);+#1657 = LINE('',#1658,#1659);+#1658 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#1659 = VECTOR('',#1660,1.);+#1660 = DIRECTION('',(0.,-1.));+#1661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1662 = PCURVE('',#1663,#1668);+#1663 = CYLINDRICAL_SURFACE('',#1664,0.1);+#1664 = AXIS2_PLACEMENT_3D('',#1665,#1666,#1667);+#1665 = CARTESIAN_POINT('',(-0.85,-0.175,0.35));+#1666 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1667 = DIRECTION('',(0.,0.,1.));+#1668 = DEFINITIONAL_REPRESENTATION('',(#1669),#1673);+#1669 = LINE('',#1670,#1671);+#1670 = CARTESIAN_POINT('',(0.,0.));+#1671 = VECTOR('',#1672,1.);+#1672 = DIRECTION('',(0.,-1.));+#1673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1674 = ADVANCED_FACE('',(#1675),#569,.F.);+#1675 = FACE_BOUND('',#1676,.F.);+#1676 = EDGE_LOOP('',(#1677,#1700,#1701,#1729));+#1677 = ORIENTED_EDGE('',*,*,#1678,.F.);+#1678 = EDGE_CURVE('',#554,#1679,#1681,.T.);+#1679 = VERTEX_POINT('',#1680);+#1680 = CARTESIAN_POINT('',(-0.8,0.175,0.6));+#1681 = SURFACE_CURVE('',#1682,(#1686,#1693),.PCURVE_S1.);+#1682 = LINE('',#1683,#1684);+#1683 = CARTESIAN_POINT('',(-0.8,0.175,0.441412655976));+#1684 = VECTOR('',#1685,1.);+#1685 = DIRECTION('',(0.,0.,1.));+#1686 = PCURVE('',#569,#1687);+#1687 = DEFINITIONAL_REPRESENTATION('',(#1688),#1692);+#1688 = LINE('',#1689,#1690);+#1689 = CARTESIAN_POINT('',(1.53,-0.158587344024));+#1690 = VECTOR('',#1691,1.);+#1691 = DIRECTION('',(0.,1.));+#1692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1693 = PCURVE('',#1637,#1694);+#1694 = DEFINITIONAL_REPRESENTATION('',(#1695),#1699);+#1695 = LINE('',#1696,#1697);+#1696 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1697 = VECTOR('',#1698,1.);+#1698 = DIRECTION('',(1.,0.));+#1699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1700 = ORIENTED_EDGE('',*,*,#553,.T.);+#1701 = ORIENTED_EDGE('',*,*,#1702,.T.);+#1702 = EDGE_CURVE('',#526,#1703,#1705,.T.);+#1703 = VERTEX_POINT('',#1704);+#1704 = CARTESIAN_POINT('',(-0.8,0.775,0.6));+#1705 = SURFACE_CURVE('',#1706,(#1710,#1717),.PCURVE_S1.);+#1706 = LINE('',#1707,#1708);+#1707 = CARTESIAN_POINT('',(-0.8,0.775,0.441412655976));+#1708 = VECTOR('',#1709,1.);+#1709 = DIRECTION('',(0.,0.,1.));+#1710 = PCURVE('',#569,#1711);+#1711 = DEFINITIONAL_REPRESENTATION('',(#1712),#1716);+#1712 = LINE('',#1713,#1714);+#1713 = CARTESIAN_POINT('',(2.13,-0.158587344024));+#1714 = VECTOR('',#1715,1.);+#1715 = DIRECTION('',(0.,1.));+#1716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1717 = PCURVE('',#1718,#1723);+#1718 = PLANE('',#1719);+#1719 = AXIS2_PLACEMENT_3D('',#1720,#1721,#1722);+#1720 = CARTESIAN_POINT('',(-1.064349127789,0.775,0.282825311951));+#1721 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1722 = DIRECTION('',(0.,-0.,1.));+#1723 = DEFINITIONAL_REPRESENTATION('',(#1724),#1728);+#1724 = LINE('',#1725,#1726);+#1725 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1726 = VECTOR('',#1727,1.);+#1727 = DIRECTION('',(1.,0.));+#1728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1729 = ORIENTED_EDGE('',*,*,#1730,.F.);+#1730 = EDGE_CURVE('',#1679,#1703,#1731,.T.);+#1731 = SURFACE_CURVE('',#1732,(#1736,#1743),.PCURVE_S1.);+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-0.8,-1.355,0.6));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1736 = PCURVE('',#569,#1737);+#1737 = DEFINITIONAL_REPRESENTATION('',(#1738),#1742);+#1738 = LINE('',#1739,#1740);+#1739 = CARTESIAN_POINT('',(0.,0.));+#1740 = VECTOR('',#1741,1.);+#1741 = DIRECTION('',(1.,0.));+#1742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1743 = PCURVE('',#1744,#1749);+#1744 = PLANE('',#1745);+#1745 = AXIS2_PLACEMENT_3D('',#1746,#1747,#1748);+#1746 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.6));+#1747 = DIRECTION('',(2.888762391192E-17,8.634073551009E-28,-1.));+#1748 = DIRECTION('',(1.,1.51922136901E-16,2.888762391192E-17));+#1749 = DEFINITIONAL_REPRESENTATION('',(#1750),#1754);+#1750 = LINE('',#1751,#1752);+#1751 = CARTESIAN_POINT('',(-0.8,2.7925));+#1752 = VECTOR('',#1753,1.);+#1753 = DIRECTION('',(4.08998344385E-17,-1.));+#1754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1755 = ADVANCED_FACE('',(#1756),#541,.F.);+#1756 = FACE_BOUND('',#1757,.F.);+#1757 = EDGE_LOOP('',(#1758,#1781,#1782,#1810));+#1758 = ORIENTED_EDGE('',*,*,#1759,.F.);+#1759 = EDGE_CURVE('',#526,#1760,#1762,.T.);+#1760 = VERTEX_POINT('',#1761);+#1761 = CARTESIAN_POINT('',(-0.85,0.775,0.45));+#1762 = SURFACE_CURVE('',#1763,(#1767,#1774),.PCURVE_S1.);+#1763 = LINE('',#1764,#1765);+#1764 = CARTESIAN_POINT('',(-0.75,0.775,0.45));+#1765 = VECTOR('',#1766,1.);+#1766 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1767 = PCURVE('',#541,#1768);+#1768 = DEFINITIONAL_REPRESENTATION('',(#1769),#1773);+#1769 = LINE('',#1770,#1771);+#1770 = CARTESIAN_POINT('',(0.,0.));+#1771 = VECTOR('',#1772,1.);+#1772 = DIRECTION('',(1.,0.));+#1773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1774 = PCURVE('',#1718,#1775);+#1775 = DEFINITIONAL_REPRESENTATION('',(#1776),#1780);+#1776 = LINE('',#1777,#1778);+#1777 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1778 = VECTOR('',#1779,1.);+#1779 = DIRECTION('',(0.,-1.));+#1780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1781 = ORIENTED_EDGE('',*,*,#525,.T.);+#1782 = ORIENTED_EDGE('',*,*,#1783,.T.);+#1783 = EDGE_CURVE('',#498,#1784,#1786,.T.);+#1784 = VERTEX_POINT('',#1785);+#1785 = CARTESIAN_POINT('',(-0.85,1.125,0.45));+#1786 = SURFACE_CURVE('',#1787,(#1791,#1798),.PCURVE_S1.);+#1787 = LINE('',#1788,#1789);+#1788 = CARTESIAN_POINT('',(-0.75,1.125,0.45));+#1789 = VECTOR('',#1790,1.);+#1790 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#1791 = PCURVE('',#541,#1792);+#1792 = DEFINITIONAL_REPRESENTATION('',(#1793),#1797);+#1793 = LINE('',#1794,#1795);+#1794 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#1795 = VECTOR('',#1796,1.);+#1796 = DIRECTION('',(1.,0.));+#1797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1798 = PCURVE('',#1799,#1804);+#1799 = PLANE('',#1800);+#1800 = AXIS2_PLACEMENT_3D('',#1801,#1802,#1803);+#1801 = CARTESIAN_POINT('',(-1.064349127789,1.125,0.282825311951));+#1802 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1803 = DIRECTION('',(0.,-0.,1.));+#1804 = DEFINITIONAL_REPRESENTATION('',(#1805),#1809);+#1805 = LINE('',#1806,#1807);+#1806 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1807 = VECTOR('',#1808,1.);+#1808 = DIRECTION('',(0.,-1.));+#1809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1810 = ORIENTED_EDGE('',*,*,#1811,.F.);+#1811 = EDGE_CURVE('',#1760,#1784,#1812,.T.);+#1812 = SURFACE_CURVE('',#1813,(#1817,#1824),.PCURVE_S1.);+#1813 = LINE('',#1814,#1815);+#1814 = CARTESIAN_POINT('',(-0.85,0.775,0.45));+#1815 = VECTOR('',#1816,1.);+#1816 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1817 = PCURVE('',#541,#1818);+#1818 = DEFINITIONAL_REPRESENTATION('',(#1819),#1823);+#1819 = LINE('',#1820,#1821);+#1820 = CARTESIAN_POINT('',(1.E-01,1.144237745222E-18));+#1821 = VECTOR('',#1822,1.);+#1822 = DIRECTION('',(0.,-1.));+#1823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1824 = PCURVE('',#1825,#1830);+#1825 = CYLINDRICAL_SURFACE('',#1826,0.1);+#1826 = AXIS2_PLACEMENT_3D('',#1827,#1828,#1829);+#1827 = CARTESIAN_POINT('',(-0.85,0.775,0.35));+#1828 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1829 = DIRECTION('',(0.,0.,1.));+#1830 = DEFINITIONAL_REPRESENTATION('',(#1831),#1835);+#1831 = LINE('',#1832,#1833);+#1832 = CARTESIAN_POINT('',(0.,0.));+#1833 = VECTOR('',#1834,1.);+#1834 = DIRECTION('',(0.,-1.));+#1835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1836 = ADVANCED_FACE('',(#1837),#513,.F.);+#1837 = FACE_BOUND('',#1838,.F.);+#1838 = EDGE_LOOP('',(#1839,#1860,#1861,#1862));+#1839 = ORIENTED_EDGE('',*,*,#1840,.F.);+#1840 = EDGE_CURVE('',#498,#1282,#1841,.T.);+#1841 = SURFACE_CURVE('',#1842,(#1846,#1853),.PCURVE_S1.);+#1842 = LINE('',#1843,#1844);+#1843 = CARTESIAN_POINT('',(-0.8,1.125,0.441412655976));+#1844 = VECTOR('',#1845,1.);+#1845 = DIRECTION('',(0.,0.,1.));+#1846 = PCURVE('',#513,#1847);+#1847 = DEFINITIONAL_REPRESENTATION('',(#1848),#1852);+#1848 = LINE('',#1849,#1850);+#1849 = CARTESIAN_POINT('',(2.48,-0.158587344024));+#1850 = VECTOR('',#1851,1.);+#1851 = DIRECTION('',(0.,1.));+#1852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1853 = PCURVE('',#1799,#1854);+#1854 = DEFINITIONAL_REPRESENTATION('',(#1855),#1859);+#1855 = LINE('',#1856,#1857);+#1856 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1857 = VECTOR('',#1858,1.);+#1858 = DIRECTION('',(1.,0.));+#1859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1860 = ORIENTED_EDGE('',*,*,#497,.T.);+#1861 = ORIENTED_EDGE('',*,*,#1336,.T.);+#1862 = ORIENTED_EDGE('',*,*,#1309,.F.);+#1863 = ADVANCED_FACE('',(#1864),#865,.F.);+#1864 = FACE_BOUND('',#1865,.F.);+#1865 = EDGE_LOOP('',(#1866,#1867,#1868,#1894));+#1866 = ORIENTED_EDGE('',*,*,#1020,.F.);+#1867 = ORIENTED_EDGE('',*,*,#851,.T.);+#1868 = ORIENTED_EDGE('',*,*,#1869,.T.);+#1869 = EDGE_CURVE('',#824,#1091,#1870,.T.);+#1870 = SURFACE_CURVE('',#1871,(#1875,#1882),.PCURVE_S1.);+#1871 = LINE('',#1872,#1873);+#1872 = CARTESIAN_POINT('',(0.8,1.125,0.441412655976));+#1873 = VECTOR('',#1874,1.);+#1874 = DIRECTION('',(0.,0.,1.));+#1875 = PCURVE('',#865,#1876); #1876 = DEFINITIONAL_REPRESENTATION('',(#1877),#1881); #1877 = LINE('',#1878,#1879);-#1878 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));+#1878 = CARTESIAN_POINT('',(0.23,-0.158587344024)); #1879 = VECTOR('',#1880,1.);-#1880 = DIRECTION('',(1.,0.));+#1880 = DIRECTION('',(0.,1.)); #1881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#1882 = ORIENTED_EDGE('',*,*,#519,.T.);-#1883 = ORIENTED_EDGE('',*,*,#1358,.T.);-#1884 = ORIENTED_EDGE('',*,*,#1331,.F.);-#1885 = ADVANCED_FACE('',(#1886),#887,.F.);-#1886 = FACE_BOUND('',#1887,.F.);-#1887 = EDGE_LOOP('',(#1888,#1889,#1890,#1916));-#1888 = ORIENTED_EDGE('',*,*,#1042,.F.);-#1889 = ORIENTED_EDGE('',*,*,#873,.T.);-#1890 = ORIENTED_EDGE('',*,*,#1891,.T.);-#1891 = EDGE_CURVE('',#846,#1113,#1892,.T.);-#1892 = SURFACE_CURVE('',#1893,(#1897,#1904),.PCURVE_S1.);-#1893 = LINE('',#1894,#1895);-#1894 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658));-#1895 = VECTOR('',#1896,1.);-#1896 = DIRECTION('',(0.,0.,1.));-#1897 = PCURVE('',#887,#1898);-#1898 = DEFINITIONAL_REPRESENTATION('',(#1899),#1903);-#1899 = LINE('',#1900,#1901);-#1900 = CARTESIAN_POINT('',(0.155,-0.229152182342));-#1901 = VECTOR('',#1902,1.);-#1902 = DIRECTION('',(0.,1.));-#1903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1904 = PCURVE('',#1905,#1910);-#1905 = PLANE('',#1906);-#1906 = AXIS2_PLACEMENT_3D('',#1907,#1908,#1909);-#1907 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315));-#1908 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#1909 = DIRECTION('',(0.,0.,1.));-#1910 = DEFINITIONAL_REPRESENTATION('',(#1911),#1915);-#1911 = LINE('',#1912,#1913);-#1912 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#1913 = VECTOR('',#1914,1.);-#1914 = DIRECTION('',(1.,0.));-#1915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1916 = ORIENTED_EDGE('',*,*,#1112,.F.);-#1917 = ADVANCED_FACE('',(#1918),#861,.F.);-#1918 = FACE_BOUND('',#1919,.F.);-#1919 = EDGE_LOOP('',(#1920,#1943,#1944,#1972));-#1920 = ORIENTED_EDGE('',*,*,#1921,.F.);-#1921 = EDGE_CURVE('',#846,#1922,#1924,.T.);-#1922 = VERTEX_POINT('',#1923);-#1923 = CARTESIAN_POINT('',(0.85,1.2,0.75));-#1924 = SURFACE_CURVE('',#1925,(#1929,#1936),.PCURVE_S1.);-#1925 = LINE('',#1926,#1927);-#1926 = CARTESIAN_POINT('',(0.75,1.2,0.75));-#1927 = VECTOR('',#1928,1.);-#1928 = DIRECTION('',(1.,1.110223024625E-16,0.));-#1929 = PCURVE('',#861,#1930);-#1930 = DEFINITIONAL_REPRESENTATION('',(#1931),#1935);-#1931 = LINE('',#1932,#1933);-#1932 = CARTESIAN_POINT('',(0.,0.));-#1933 = VECTOR('',#1934,1.);-#1934 = DIRECTION('',(1.,0.));-#1935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1936 = PCURVE('',#1905,#1937);-#1937 = DEFINITIONAL_REPRESENTATION('',(#1938),#1942);-#1938 = LINE('',#1939,#1940);-#1939 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1940 = VECTOR('',#1941,1.);-#1941 = DIRECTION('',(0.,-1.));-#1942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1943 = ORIENTED_EDGE('',*,*,#845,.T.);-#1944 = ORIENTED_EDGE('',*,*,#1945,.T.);-#1945 = EDGE_CURVE('',#818,#1946,#1948,.T.);-#1946 = VERTEX_POINT('',#1947);-#1947 = CARTESIAN_POINT('',(0.85,0.7,0.75));-#1948 = SURFACE_CURVE('',#1949,(#1953,#1960),.PCURVE_S1.);-#1949 = LINE('',#1950,#1951);-#1950 = CARTESIAN_POINT('',(0.75,0.7,0.75));-#1951 = VECTOR('',#1952,1.);-#1952 = DIRECTION('',(1.,1.110223024625E-16,0.));-#1953 = PCURVE('',#861,#1954);-#1954 = DEFINITIONAL_REPRESENTATION('',(#1955),#1959);-#1955 = LINE('',#1956,#1957);-#1956 = CARTESIAN_POINT('',(-5.551115123125E-17,-0.5));-#1957 = VECTOR('',#1958,1.);-#1958 = DIRECTION('',(1.,0.));-#1959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1960 = PCURVE('',#1961,#1966);-#1961 = PLANE('',#1962);-#1962 = AXIS2_PLACEMENT_3D('',#1963,#1964,#1965);-#1963 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315));-#1964 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#1965 = DIRECTION('',(0.,0.,1.));-#1966 = DEFINITIONAL_REPRESENTATION('',(#1967),#1971);-#1967 = LINE('',#1968,#1969);-#1968 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#1969 = VECTOR('',#1970,1.);-#1970 = DIRECTION('',(0.,-1.));-#1971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1972 = ORIENTED_EDGE('',*,*,#1973,.F.);-#1973 = EDGE_CURVE('',#1922,#1946,#1974,.T.);-#1974 = SURFACE_CURVE('',#1975,(#1979,#1986),.PCURVE_S1.);-#1975 = LINE('',#1976,#1977);-#1976 = CARTESIAN_POINT('',(0.85,1.2,0.75));-#1977 = VECTOR('',#1978,1.);-#1978 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#1979 = PCURVE('',#861,#1980);-#1980 = DEFINITIONAL_REPRESENTATION('',(#1981),#1985);-#1981 = LINE('',#1982,#1983);-#1982 = CARTESIAN_POINT('',(1.E-01,-1.110223024625E-17));-#1983 = VECTOR('',#1984,1.);-#1984 = DIRECTION('',(0.,-1.));-#1985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1986 = PCURVE('',#1987,#1992);-#1987 = CYLINDRICAL_SURFACE('',#1988,0.1);-#1988 = AXIS2_PLACEMENT_3D('',#1989,#1990,#1991);-#1989 = CARTESIAN_POINT('',(0.85,1.2,0.65));-#1990 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#1991 = DIRECTION('',(0.,0.,1.));-#1992 = DEFINITIONAL_REPRESENTATION('',(#1993),#1997);-#1993 = LINE('',#1994,#1995);-#1994 = CARTESIAN_POINT('',(0.,0.));-#1995 = VECTOR('',#1996,1.);-#1996 = DIRECTION('',(0.,-1.));-#1997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#1998 = ADVANCED_FACE('',(#1999),#833,.F.);-#1999 = FACE_BOUND('',#2000,.F.);-#2000 = EDGE_LOOP('',(#2001,#2024,#2025,#2053));-#2001 = ORIENTED_EDGE('',*,*,#2002,.F.);-#2002 = EDGE_CURVE('',#818,#2003,#2005,.T.);-#2003 = VERTEX_POINT('',#2004);-#2004 = CARTESIAN_POINT('',(0.8,0.7,0.9));-#2005 = SURFACE_CURVE('',#2006,(#2010,#2017),.PCURVE_S1.);-#2006 = LINE('',#2007,#2008);-#2007 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658));-#2008 = VECTOR('',#2009,1.);-#2009 = DIRECTION('',(0.,0.,1.));-#2010 = PCURVE('',#833,#2011);-#2011 = DEFINITIONAL_REPRESENTATION('',(#2012),#2016);-#2012 = LINE('',#2013,#2014);-#2013 = CARTESIAN_POINT('',(0.655,-0.229152182342));-#2014 = VECTOR('',#2015,1.);-#2015 = DIRECTION('',(0.,1.));-#2016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2017 = PCURVE('',#1961,#2018);-#2018 = DEFINITIONAL_REPRESENTATION('',(#2019),#2023);-#2019 = LINE('',#2020,#2021);-#2020 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#2021 = VECTOR('',#2022,1.);-#2022 = DIRECTION('',(1.,0.));-#2023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2024 = ORIENTED_EDGE('',*,*,#817,.T.);-#2025 = ORIENTED_EDGE('',*,*,#2026,.T.);-#2026 = EDGE_CURVE('',#790,#2027,#2029,.T.);-#2027 = VERTEX_POINT('',#2028);-#2028 = CARTESIAN_POINT('',(0.8,-0.7,0.9));-#2029 = SURFACE_CURVE('',#2030,(#2034,#2041),.PCURVE_S1.);-#2030 = LINE('',#2031,#2032);-#2031 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658));-#2032 = VECTOR('',#2033,1.);-#2033 = DIRECTION('',(0.,0.,1.));-#2034 = PCURVE('',#833,#2035);-#2035 = DEFINITIONAL_REPRESENTATION('',(#2036),#2040);-#2036 = LINE('',#2037,#2038);-#2037 = CARTESIAN_POINT('',(2.055,-0.229152182342));-#2038 = VECTOR('',#2039,1.);-#2039 = DIRECTION('',(0.,1.));-#2040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2041 = PCURVE('',#2042,#2047);-#2042 = PLANE('',#2043);-#2043 = AXIS2_PLACEMENT_3D('',#2044,#2045,#2046);-#2044 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315));-#2045 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2046 = DIRECTION('',(0.,0.,1.));-#2047 = DEFINITIONAL_REPRESENTATION('',(#2048),#2052);-#2048 = LINE('',#2049,#2050);-#2049 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#2050 = VECTOR('',#2051,1.);-#2051 = DIRECTION('',(1.,0.));-#2052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2053 = ORIENTED_EDGE('',*,*,#2054,.F.);-#2054 = EDGE_CURVE('',#2003,#2027,#2055,.T.);-#2055 = SURFACE_CURVE('',#2056,(#2060,#2067),.PCURVE_S1.);-#2056 = LINE('',#2057,#2058);-#2057 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#2058 = VECTOR('',#2059,1.);-#2059 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2060 = PCURVE('',#833,#2061);-#2061 = DEFINITIONAL_REPRESENTATION('',(#2062),#2066);-#2062 = LINE('',#2063,#2064);-#2063 = CARTESIAN_POINT('',(0.,0.));-#2064 = VECTOR('',#2065,1.);-#2065 = DIRECTION('',(1.,0.));-#2066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2067 = PCURVE('',#2068,#2073);-#2068 = PLANE('',#2069);-#2069 = AXIS2_PLACEMENT_3D('',#2070,#2071,#2072);-#2070 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));-#2071 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));-#2072 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));-#2073 = DEFINITIONAL_REPRESENTATION('',(#2074),#2078);-#2074 = LINE('',#2075,#2076);-#2075 = CARTESIAN_POINT('',(0.8,8.25E-02));-#2076 = VECTOR('',#2077,1.);-#2077 = DIRECTION('',(-4.08998344385E-17,1.));-#2078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2079 = ADVANCED_FACE('',(#2080),#805,.F.);-#2080 = FACE_BOUND('',#2081,.F.);-#2081 = EDGE_LOOP('',(#2082,#2105,#2106,#2134));-#2082 = ORIENTED_EDGE('',*,*,#2083,.F.);-#2083 = EDGE_CURVE('',#790,#2084,#2086,.T.);-#2084 = VERTEX_POINT('',#2085);-#2085 = CARTESIAN_POINT('',(0.85,-0.7,0.75));-#2086 = SURFACE_CURVE('',#2087,(#2091,#2098),.PCURVE_S1.);-#2087 = LINE('',#2088,#2089);-#2088 = CARTESIAN_POINT('',(0.75,-0.7,0.75));-#2089 = VECTOR('',#2090,1.);-#2090 = DIRECTION('',(1.,1.110223024625E-16,0.));-#2091 = PCURVE('',#805,#2092);-#2092 = DEFINITIONAL_REPRESENTATION('',(#2093),#2097);-#2093 = LINE('',#2094,#2095);-#2094 = CARTESIAN_POINT('',(0.,0.));-#2095 = VECTOR('',#2096,1.);-#2096 = DIRECTION('',(1.,0.));-#2097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2098 = PCURVE('',#2042,#2099);-#2099 = DEFINITIONAL_REPRESENTATION('',(#2100),#2104);-#2100 = LINE('',#2101,#2102);-#2101 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#2102 = VECTOR('',#2103,1.);-#2103 = DIRECTION('',(0.,-1.));-#2104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2105 = ORIENTED_EDGE('',*,*,#789,.T.);-#2106 = ORIENTED_EDGE('',*,*,#2107,.T.);-#2107 = EDGE_CURVE('',#762,#2108,#2110,.T.);-#2108 = VERTEX_POINT('',#2109);-#2109 = CARTESIAN_POINT('',(0.85,-1.2,0.75));-#2110 = SURFACE_CURVE('',#2111,(#2115,#2122),.PCURVE_S1.);-#2111 = LINE('',#2112,#2113);-#2112 = CARTESIAN_POINT('',(0.75,-1.2,0.75));-#2113 = VECTOR('',#2114,1.);-#2114 = DIRECTION('',(1.,1.110223024625E-16,0.));-#2115 = PCURVE('',#805,#2116);-#2116 = DEFINITIONAL_REPRESENTATION('',(#2117),#2121);-#2117 = LINE('',#2118,#2119);-#2118 = CARTESIAN_POINT('',(-5.551115123125E-17,-0.5));-#2119 = VECTOR('',#2120,1.);-#2120 = DIRECTION('',(1.,0.));-#2121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2122 = PCURVE('',#2123,#2128);-#2123 = PLANE('',#2124);-#2124 = AXIS2_PLACEMENT_3D('',#2125,#2126,#2127);-#2125 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315));-#2126 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2127 = DIRECTION('',(0.,0.,1.));-#2128 = DEFINITIONAL_REPRESENTATION('',(#2129),#2133);-#2129 = LINE('',#2130,#2131);-#2130 = CARTESIAN_POINT('',(0.308304364685,0.319123385139));-#2131 = VECTOR('',#2132,1.);-#2132 = DIRECTION('',(0.,-1.));-#2133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2134 = ORIENTED_EDGE('',*,*,#2135,.F.);-#2135 = EDGE_CURVE('',#2084,#2108,#2136,.T.);-#2136 = SURFACE_CURVE('',#2137,(#2141,#2148),.PCURVE_S1.);-#2137 = LINE('',#2138,#2139);-#2138 = CARTESIAN_POINT('',(0.85,-0.7,0.75));-#2139 = VECTOR('',#2140,1.);-#2140 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2141 = PCURVE('',#805,#2142);-#2142 = DEFINITIONAL_REPRESENTATION('',(#2143),#2147);-#2143 = LINE('',#2144,#2145);-#2144 = CARTESIAN_POINT('',(1.E-01,-1.110223024625E-17));-#2145 = VECTOR('',#2146,1.);-#2146 = DIRECTION('',(0.,-1.));-#2147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2148 = PCURVE('',#2149,#2154);-#2149 = CYLINDRICAL_SURFACE('',#2150,0.1);-#2150 = AXIS2_PLACEMENT_3D('',#2151,#2152,#2153);-#2151 = CARTESIAN_POINT('',(0.85,-0.7,0.65));-#2152 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2153 = DIRECTION('',(0.,0.,1.));-#2154 = DEFINITIONAL_REPRESENTATION('',(#2155),#2159);-#2155 = LINE('',#2156,#2157);-#2156 = CARTESIAN_POINT('',(0.,0.));-#2157 = VECTOR('',#2158,1.);-#2158 = DIRECTION('',(0.,-1.));-#2159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2160 = ADVANCED_FACE('',(#2161),#777,.F.);-#2161 = FACE_BOUND('',#2162,.F.);-#2162 = EDGE_LOOP('',(#2163,#2186,#2187,#2207));-#2163 = ORIENTED_EDGE('',*,*,#2164,.F.);-#2164 = EDGE_CURVE('',#762,#2165,#2167,.T.);-#2165 = VERTEX_POINT('',#2166);-#2166 = CARTESIAN_POINT('',(0.8,-1.2,0.9));-#2167 = SURFACE_CURVE('',#2168,(#2172,#2179),.PCURVE_S1.);-#2168 = LINE('',#2169,#2170);-#2169 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658));-#2170 = VECTOR('',#2171,1.);-#2171 = DIRECTION('',(0.,0.,1.));-#2172 = PCURVE('',#777,#2173);-#2173 = DEFINITIONAL_REPRESENTATION('',(#2174),#2178);-#2174 = LINE('',#2175,#2176);-#2175 = CARTESIAN_POINT('',(2.555,-0.229152182342));-#2176 = VECTOR('',#2177,1.);-#2177 = DIRECTION('',(0.,1.));-#2178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2179 = PCURVE('',#2123,#2180);-#2180 = DEFINITIONAL_REPRESENTATION('',(#2181),#2185);-#2181 = LINE('',#2182,#2183);-#2182 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));-#2183 = VECTOR('',#2184,1.);-#2184 = DIRECTION('',(1.,0.));-#2185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2186 = ORIENTED_EDGE('',*,*,#761,.T.);-#2187 = ORIENTED_EDGE('',*,*,#2188,.T.);-#2188 = EDGE_CURVE('',#740,#2189,#2191,.T.);-#2189 = VERTEX_POINT('',#2190);-#2190 = CARTESIAN_POINT('',(0.8,-1.355,0.9));-#2191 = SURFACE_CURVE('',#2192,(#2195,#2201),.PCURVE_S1.);-#2192 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2193,#2194),.UNSPECIFIED.,.F.,+#1882 = PCURVE('',#1883,#1888);+#1883 = PLANE('',#1884);+#1884 = AXIS2_PLACEMENT_3D('',#1885,#1886,#1887);+#1885 = CARTESIAN_POINT('',(1.064349127789,1.125,0.282825311951));+#1886 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1887 = DIRECTION('',(0.,0.,1.));+#1888 = DEFINITIONAL_REPRESENTATION('',(#1889),#1893);+#1889 = LINE('',#1890,#1891);+#1890 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1891 = VECTOR('',#1892,1.);+#1892 = DIRECTION('',(1.,0.));+#1893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1894 = ORIENTED_EDGE('',*,*,#1090,.F.);+#1895 = ADVANCED_FACE('',(#1896),#839,.F.);+#1896 = FACE_BOUND('',#1897,.F.);+#1897 = EDGE_LOOP('',(#1898,#1921,#1922,#1950));+#1898 = ORIENTED_EDGE('',*,*,#1899,.F.);+#1899 = EDGE_CURVE('',#824,#1900,#1902,.T.);+#1900 = VERTEX_POINT('',#1901);+#1901 = CARTESIAN_POINT('',(0.85,1.125,0.45));+#1902 = SURFACE_CURVE('',#1903,(#1907,#1914),.PCURVE_S1.);+#1903 = LINE('',#1904,#1905);+#1904 = CARTESIAN_POINT('',(0.75,1.125,0.45));+#1905 = VECTOR('',#1906,1.);+#1906 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1907 = PCURVE('',#839,#1908);+#1908 = DEFINITIONAL_REPRESENTATION('',(#1909),#1913);+#1909 = LINE('',#1910,#1911);+#1910 = CARTESIAN_POINT('',(0.,0.));+#1911 = VECTOR('',#1912,1.);+#1912 = DIRECTION('',(1.,0.));+#1913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1914 = PCURVE('',#1883,#1915);+#1915 = DEFINITIONAL_REPRESENTATION('',(#1916),#1920);+#1916 = LINE('',#1917,#1918);+#1917 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1918 = VECTOR('',#1919,1.);+#1919 = DIRECTION('',(0.,-1.));+#1920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1921 = ORIENTED_EDGE('',*,*,#823,.T.);+#1922 = ORIENTED_EDGE('',*,*,#1923,.T.);+#1923 = EDGE_CURVE('',#796,#1924,#1926,.T.);+#1924 = VERTEX_POINT('',#1925);+#1925 = CARTESIAN_POINT('',(0.85,0.775,0.45));+#1926 = SURFACE_CURVE('',#1927,(#1931,#1938),.PCURVE_S1.);+#1927 = LINE('',#1928,#1929);+#1928 = CARTESIAN_POINT('',(0.75,0.775,0.45));+#1929 = VECTOR('',#1930,1.);+#1930 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1931 = PCURVE('',#839,#1932);+#1932 = DEFINITIONAL_REPRESENTATION('',(#1933),#1937);+#1933 = LINE('',#1934,#1935);+#1934 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35));+#1935 = VECTOR('',#1936,1.);+#1936 = DIRECTION('',(1.,0.));+#1937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1938 = PCURVE('',#1939,#1944);+#1939 = PLANE('',#1940);+#1940 = AXIS2_PLACEMENT_3D('',#1941,#1942,#1943);+#1941 = CARTESIAN_POINT('',(1.064349127789,0.775,0.282825311951));+#1942 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1943 = DIRECTION('',(0.,0.,1.));+#1944 = DEFINITIONAL_REPRESENTATION('',(#1945),#1949);+#1945 = LINE('',#1946,#1947);+#1946 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#1947 = VECTOR('',#1948,1.);+#1948 = DIRECTION('',(0.,-1.));+#1949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1950 = ORIENTED_EDGE('',*,*,#1951,.F.);+#1951 = EDGE_CURVE('',#1900,#1924,#1952,.T.);+#1952 = SURFACE_CURVE('',#1953,(#1957,#1964),.PCURVE_S1.);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(0.85,1.125,0.45));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1957 = PCURVE('',#839,#1958);+#1958 = DEFINITIONAL_REPRESENTATION('',(#1959),#1963);+#1959 = LINE('',#1960,#1961);+#1960 = CARTESIAN_POINT('',(1.E-01,-1.110223024625E-17));+#1961 = VECTOR('',#1962,1.);+#1962 = DIRECTION('',(0.,-1.));+#1963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1964 = PCURVE('',#1965,#1970);+#1965 = CYLINDRICAL_SURFACE('',#1966,0.1);+#1966 = AXIS2_PLACEMENT_3D('',#1967,#1968,#1969);+#1967 = CARTESIAN_POINT('',(0.85,1.125,0.35));+#1968 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1969 = DIRECTION('',(0.,0.,1.));+#1970 = DEFINITIONAL_REPRESENTATION('',(#1971),#1975);+#1971 = LINE('',#1972,#1973);+#1972 = CARTESIAN_POINT('',(0.,0.));+#1973 = VECTOR('',#1974,1.);+#1974 = DIRECTION('',(0.,-1.));+#1975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1976 = ADVANCED_FACE('',(#1977),#811,.F.);+#1977 = FACE_BOUND('',#1978,.F.);+#1978 = EDGE_LOOP('',(#1979,#2002,#2003,#2031));+#1979 = ORIENTED_EDGE('',*,*,#1980,.F.);+#1980 = EDGE_CURVE('',#796,#1981,#1983,.T.);+#1981 = VERTEX_POINT('',#1982);+#1982 = CARTESIAN_POINT('',(0.8,0.775,0.6));+#1983 = SURFACE_CURVE('',#1984,(#1988,#1995),.PCURVE_S1.);+#1984 = LINE('',#1985,#1986);+#1985 = CARTESIAN_POINT('',(0.8,0.775,0.441412655976));+#1986 = VECTOR('',#1987,1.);+#1987 = DIRECTION('',(0.,0.,1.));+#1988 = PCURVE('',#811,#1989);+#1989 = DEFINITIONAL_REPRESENTATION('',(#1990),#1994);+#1990 = LINE('',#1991,#1992);+#1991 = CARTESIAN_POINT('',(0.58,-0.158587344024));+#1992 = VECTOR('',#1993,1.);+#1993 = DIRECTION('',(0.,1.));+#1994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1995 = PCURVE('',#1939,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.,0.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2002 = ORIENTED_EDGE('',*,*,#795,.T.);+#2003 = ORIENTED_EDGE('',*,*,#2004,.T.);+#2004 = EDGE_CURVE('',#768,#2005,#2007,.T.);+#2005 = VERTEX_POINT('',#2006);+#2006 = CARTESIAN_POINT('',(0.8,-0.775,0.6));+#2007 = SURFACE_CURVE('',#2008,(#2012,#2019),.PCURVE_S1.);+#2008 = LINE('',#2009,#2010);+#2009 = CARTESIAN_POINT('',(0.8,-0.775,0.441412655976));+#2010 = VECTOR('',#2011,1.);+#2011 = DIRECTION('',(0.,0.,1.));+#2012 = PCURVE('',#811,#2013);+#2013 = DEFINITIONAL_REPRESENTATION('',(#2014),#2018);+#2014 = LINE('',#2015,#2016);+#2015 = CARTESIAN_POINT('',(2.13,-0.158587344024));+#2016 = VECTOR('',#2017,1.);+#2017 = DIRECTION('',(0.,1.));+#2018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2019 = PCURVE('',#2020,#2025);+#2020 = PLANE('',#2021);+#2021 = AXIS2_PLACEMENT_3D('',#2022,#2023,#2024);+#2022 = CARTESIAN_POINT('',(1.064349127789,-0.775,0.282825311951));+#2023 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2024 = DIRECTION('',(0.,0.,1.));+#2025 = DEFINITIONAL_REPRESENTATION('',(#2026),#2030);+#2026 = LINE('',#2027,#2028);+#2027 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#2028 = VECTOR('',#2029,1.);+#2029 = DIRECTION('',(1.,0.));+#2030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2031 = ORIENTED_EDGE('',*,*,#2032,.F.);+#2032 = EDGE_CURVE('',#1981,#2005,#2033,.T.);+#2033 = SURFACE_CURVE('',#2034,(#2038,#2045),.PCURVE_S1.);+#2034 = LINE('',#2035,#2036);+#2035 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#2036 = VECTOR('',#2037,1.);+#2037 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2038 = PCURVE('',#811,#2039);+#2039 = DEFINITIONAL_REPRESENTATION('',(#2040),#2044);+#2040 = LINE('',#2041,#2042);+#2041 = CARTESIAN_POINT('',(0.,0.));+#2042 = VECTOR('',#2043,1.);+#2043 = DIRECTION('',(1.,0.));+#2044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2045 = PCURVE('',#2046,#2051);+#2046 = PLANE('',#2047);+#2047 = AXIS2_PLACEMENT_3D('',#2048,#2049,#2050);+#2048 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.6));+#2049 = DIRECTION('',(2.888762391192E-17,8.634073551009E-28,-1.));+#2050 = DIRECTION('',(1.,1.51922136901E-16,2.888762391192E-17));+#2051 = DEFINITIONAL_REPRESENTATION('',(#2052),#2056);+#2052 = LINE('',#2053,#2054);+#2053 = CARTESIAN_POINT('',(0.8,8.25E-02));+#2054 = VECTOR('',#2055,1.);+#2055 = DIRECTION('',(-4.08998344385E-17,1.));+#2056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2057 = ADVANCED_FACE('',(#2058),#783,.F.);+#2058 = FACE_BOUND('',#2059,.F.);+#2059 = EDGE_LOOP('',(#2060,#2083,#2084,#2112));+#2060 = ORIENTED_EDGE('',*,*,#2061,.F.);+#2061 = EDGE_CURVE('',#768,#2062,#2064,.T.);+#2062 = VERTEX_POINT('',#2063);+#2063 = CARTESIAN_POINT('',(0.85,-0.775,0.45));+#2064 = SURFACE_CURVE('',#2065,(#2069,#2076),.PCURVE_S1.);+#2065 = LINE('',#2066,#2067);+#2066 = CARTESIAN_POINT('',(0.75,-0.775,0.45));+#2067 = VECTOR('',#2068,1.);+#2068 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2069 = PCURVE('',#783,#2070);+#2070 = DEFINITIONAL_REPRESENTATION('',(#2071),#2075);+#2071 = LINE('',#2072,#2073);+#2072 = CARTESIAN_POINT('',(0.,0.));+#2073 = VECTOR('',#2074,1.);+#2074 = DIRECTION('',(1.,0.));+#2075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2076 = PCURVE('',#2020,#2077);+#2077 = DEFINITIONAL_REPRESENTATION('',(#2078),#2082);+#2078 = LINE('',#2079,#2080);+#2079 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#2080 = VECTOR('',#2081,1.);+#2081 = DIRECTION('',(0.,-1.));+#2082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2083 = ORIENTED_EDGE('',*,*,#767,.T.);+#2084 = ORIENTED_EDGE('',*,*,#2085,.T.);+#2085 = EDGE_CURVE('',#740,#2086,#2088,.T.);+#2086 = VERTEX_POINT('',#2087);+#2087 = CARTESIAN_POINT('',(0.85,-1.125,0.45));+#2088 = SURFACE_CURVE('',#2089,(#2093,#2100),.PCURVE_S1.);+#2089 = LINE('',#2090,#2091);+#2090 = CARTESIAN_POINT('',(0.75,-1.125,0.45));+#2091 = VECTOR('',#2092,1.);+#2092 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2093 = PCURVE('',#783,#2094);+#2094 = DEFINITIONAL_REPRESENTATION('',(#2095),#2099);+#2095 = LINE('',#2096,#2097);+#2096 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35));+#2097 = VECTOR('',#2098,1.);+#2098 = DIRECTION('',(1.,0.));+#2099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2100 = PCURVE('',#2101,#2106);+#2101 = PLANE('',#2102);+#2102 = AXIS2_PLACEMENT_3D('',#2103,#2104,#2105);+#2103 = CARTESIAN_POINT('',(1.064349127789,-1.125,0.282825311951));+#2104 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2105 = DIRECTION('',(0.,0.,1.));+#2106 = DEFINITIONAL_REPRESENTATION('',(#2107),#2111);+#2107 = LINE('',#2108,#2109);+#2108 = CARTESIAN_POINT('',(0.167174688049,0.314349127789));+#2109 = VECTOR('',#2110,1.);+#2110 = DIRECTION('',(0.,-1.));+#2111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2112 = ORIENTED_EDGE('',*,*,#2113,.F.);+#2113 = EDGE_CURVE('',#2062,#2086,#2114,.T.);+#2114 = SURFACE_CURVE('',#2115,(#2119,#2126),.PCURVE_S1.);+#2115 = LINE('',#2116,#2117);+#2116 = CARTESIAN_POINT('',(0.85,-0.775,0.45));+#2117 = VECTOR('',#2118,1.);+#2118 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2119 = PCURVE('',#783,#2120);+#2120 = DEFINITIONAL_REPRESENTATION('',(#2121),#2125);+#2121 = LINE('',#2122,#2123);+#2122 = CARTESIAN_POINT('',(1.E-01,-1.110223024625E-17));+#2123 = VECTOR('',#2124,1.);+#2124 = DIRECTION('',(0.,-1.));+#2125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2126 = PCURVE('',#2127,#2132);+#2127 = CYLINDRICAL_SURFACE('',#2128,0.1);+#2128 = AXIS2_PLACEMENT_3D('',#2129,#2130,#2131);+#2129 = CARTESIAN_POINT('',(0.85,-0.775,0.35));+#2130 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2131 = DIRECTION('',(0.,0.,1.));+#2132 = DEFINITIONAL_REPRESENTATION('',(#2133),#2137);+#2133 = LINE('',#2134,#2135);+#2134 = CARTESIAN_POINT('',(0.,0.));+#2135 = VECTOR('',#2136,1.);+#2136 = DIRECTION('',(0.,-1.));+#2137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2138 = ADVANCED_FACE('',(#2139),#755,.F.);+#2139 = FACE_BOUND('',#2140,.F.);+#2140 = EDGE_LOOP('',(#2141,#2164,#2165,#2185));+#2141 = ORIENTED_EDGE('',*,*,#2142,.F.);+#2142 = EDGE_CURVE('',#740,#2143,#2145,.T.);+#2143 = VERTEX_POINT('',#2144);+#2144 = CARTESIAN_POINT('',(0.8,-1.125,0.6));+#2145 = SURFACE_CURVE('',#2146,(#2150,#2157),.PCURVE_S1.);+#2146 = LINE('',#2147,#2148);+#2147 = CARTESIAN_POINT('',(0.8,-1.125,0.441412655976));+#2148 = VECTOR('',#2149,1.);+#2149 = DIRECTION('',(0.,0.,1.));+#2150 = PCURVE('',#755,#2151);+#2151 = DEFINITIONAL_REPRESENTATION('',(#2152),#2156);+#2152 = LINE('',#2153,#2154);+#2153 = CARTESIAN_POINT('',(2.48,-0.158587344024));+#2154 = VECTOR('',#2155,1.);+#2155 = DIRECTION('',(0.,1.));+#2156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2157 = PCURVE('',#2101,#2158);+#2158 = DEFINITIONAL_REPRESENTATION('',(#2159),#2163);+#2159 = LINE('',#2160,#2161);+#2160 = CARTESIAN_POINT('',(0.158587344025,0.264349127789));+#2161 = VECTOR('',#2162,1.);+#2162 = DIRECTION('',(1.,0.));+#2163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2164 = ORIENTED_EDGE('',*,*,#739,.T.);+#2165 = ORIENTED_EDGE('',*,*,#2166,.T.);+#2166 = EDGE_CURVE('',#718,#2167,#2169,.T.);+#2167 = VERTEX_POINT('',#2168);+#2168 = CARTESIAN_POINT('',(0.8,-1.355,0.6));+#2169 = SURFACE_CURVE('',#2170,(#2173,#2179),.PCURVE_S1.);+#2170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2171,#2172),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2193 = CARTESIAN_POINT('',(0.8,-1.355,0.75));-#2194 = CARTESIAN_POINT('',(0.8,-1.355,0.9));-#2195 = PCURVE('',#777,#2196);-#2196 = DEFINITIONAL_REPRESENTATION('',(#2197),#2200);-#2197 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2198,#2199),.UNSPECIFIED.,.F.,+#2171 = CARTESIAN_POINT('',(0.8,-1.355,0.45));+#2172 = CARTESIAN_POINT('',(0.8,-1.355,0.6));+#2173 = PCURVE('',#755,#2174);+#2174 = DEFINITIONAL_REPRESENTATION('',(#2175),#2178);+#2175 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2176,#2177),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2198 = CARTESIAN_POINT('',(2.71,-0.15));-#2199 = CARTESIAN_POINT('',(2.71,0.));-#2200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#2176 = CARTESIAN_POINT('',(2.71,-0.15));+#2177 = CARTESIAN_POINT('',(2.71,0.));+#2178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2201 = PCURVE('',#993,#2202);-#2202 = DEFINITIONAL_REPRESENTATION('',(#2203),#2206);-#2203 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2204,#2205),.UNSPECIFIED.,.F.,+#2179 = PCURVE('',#971,#2180);+#2180 = DEFINITIONAL_REPRESENTATION('',(#2181),#2184);+#2181 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2182,#2183),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2204 = CARTESIAN_POINT('',(0.,-0.15));-#2205 = CARTESIAN_POINT('',(0.,0.));-#2206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2207 = ORIENTED_EDGE('',*,*,#2208,.F.);-#2208 = EDGE_CURVE('',#2165,#2189,#2209,.T.);-#2209 = SURFACE_CURVE('',#2210,(#2214,#2221),.PCURVE_S1.);-#2210 = LINE('',#2211,#2212);-#2211 = CARTESIAN_POINT('',(0.8,1.355,0.9));-#2212 = VECTOR('',#2213,1.);-#2213 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2214 = PCURVE('',#777,#2215);-#2215 = DEFINITIONAL_REPRESENTATION('',(#2216),#2220);+#2182 = CARTESIAN_POINT('',(0.,-0.15));+#2183 = CARTESIAN_POINT('',(0.,0.));+#2184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2185 = ORIENTED_EDGE('',*,*,#2186,.F.);+#2186 = EDGE_CURVE('',#2143,#2167,#2187,.T.);+#2187 = SURFACE_CURVE('',#2188,(#2192,#2199),.PCURVE_S1.);+#2188 = LINE('',#2189,#2190);+#2189 = CARTESIAN_POINT('',(0.8,1.355,0.6));+#2190 = VECTOR('',#2191,1.);+#2191 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2192 = PCURVE('',#755,#2193);+#2193 = DEFINITIONAL_REPRESENTATION('',(#2194),#2198);+#2194 = LINE('',#2195,#2196);+#2195 = CARTESIAN_POINT('',(0.,0.));+#2196 = VECTOR('',#2197,1.);+#2197 = DIRECTION('',(1.,0.));+#2198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2199 = PCURVE('',#1420,#2200);+#2200 = DEFINITIONAL_REPRESENTATION('',(#2201),#2205);+#2201 = LINE('',#2202,#2203);+#2202 = CARTESIAN_POINT('',(0.8,8.25E-02));+#2203 = VECTOR('',#2204,1.);+#2204 = DIRECTION('',(-4.08998344385E-17,1.));+#2205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2206 = ADVANCED_FACE('',(#2207),#899,.F.);+#2207 = FACE_BOUND('',#2208,.F.);+#2208 = EDGE_LOOP('',(#2209,#2210,#2211,#2234));+#2209 = ORIENTED_EDGE('',*,*,#883,.T.);+#2210 = ORIENTED_EDGE('',*,*,#1357,.T.);+#2211 = ORIENTED_EDGE('',*,*,#2212,.F.);+#2212 = EDGE_CURVE('',#2213,#1358,#2215,.T.);+#2213 = VERTEX_POINT('',#2214);+#2214 = CARTESIAN_POINT('',(-0.705,-1.45,0.6));+#2215 = SURFACE_CURVE('',#2216,(#2220,#2227),.PCURVE_S1.); #2216 = LINE('',#2217,#2218);-#2217 = CARTESIAN_POINT('',(0.,0.));+#2217 = CARTESIAN_POINT('',(-0.705,-1.45,0.6)); #2218 = VECTOR('',#2219,1.);-#2219 = DIRECTION('',(1.,0.));-#2220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2221 = PCURVE('',#1442,#2222);-#2222 = DEFINITIONAL_REPRESENTATION('',(#2223),#2227);-#2223 = LINE('',#2224,#2225);-#2224 = CARTESIAN_POINT('',(0.8,8.25E-02));-#2225 = VECTOR('',#2226,1.);-#2226 = DIRECTION('',(-4.08998344385E-17,1.));-#2227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2228 = ADVANCED_FACE('',(#2229),#921,.F.);-#2229 = FACE_BOUND('',#2230,.F.);-#2230 = EDGE_LOOP('',(#2231,#2232,#2233,#2256));-#2231 = ORIENTED_EDGE('',*,*,#905,.T.);-#2232 = ORIENTED_EDGE('',*,*,#1379,.T.);-#2233 = ORIENTED_EDGE('',*,*,#2234,.F.);-#2234 = EDGE_CURVE('',#2235,#1380,#2237,.T.);-#2235 = VERTEX_POINT('',#2236);-#2236 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));-#2237 = SURFACE_CURVE('',#2238,(#2242,#2249),.PCURVE_S1.);-#2238 = LINE('',#2239,#2240);-#2239 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));-#2240 = VECTOR('',#2241,1.);-#2241 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#2242 = PCURVE('',#921,#2243);-#2243 = DEFINITIONAL_REPRESENTATION('',(#2244),#2248);-#2244 = LINE('',#2245,#2246);-#2245 = CARTESIAN_POINT('',(0.,0.));-#2246 = VECTOR('',#2247,1.);-#2247 = DIRECTION('',(1.,0.));-#2248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2249 = PCURVE('',#1442,#2250);-#2250 = DEFINITIONAL_REPRESENTATION('',(#2251),#2255);-#2251 = LINE('',#2252,#2253);-#2252 = CARTESIAN_POINT('',(-0.705,2.8875));-#2253 = VECTOR('',#2254,1.);-#2254 = DIRECTION('',(-0.707106781187,-0.707106781187));-#2255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2256 = ORIENTED_EDGE('',*,*,#2257,.F.);-#2257 = EDGE_CURVE('',#906,#2235,#2258,.T.);-#2258 = SURFACE_CURVE('',#2259,(#2262,#2268),.PCURVE_S1.);-#2259 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2260,#2261),.UNSPECIFIED.,.F.,+#2219 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2220 = PCURVE('',#899,#2221);+#2221 = DEFINITIONAL_REPRESENTATION('',(#2222),#2226);+#2222 = LINE('',#2223,#2224);+#2223 = CARTESIAN_POINT('',(0.,0.));+#2224 = VECTOR('',#2225,1.);+#2225 = DIRECTION('',(1.,0.));+#2226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2227 = PCURVE('',#1420,#2228);+#2228 = DEFINITIONAL_REPRESENTATION('',(#2229),#2233);+#2229 = LINE('',#2230,#2231);+#2230 = CARTESIAN_POINT('',(-0.705,2.8875));+#2231 = VECTOR('',#2232,1.);+#2232 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2234 = ORIENTED_EDGE('',*,*,#2235,.F.);+#2235 = EDGE_CURVE('',#884,#2213,#2236,.T.);+#2236 = SURFACE_CURVE('',#2237,(#2240,#2246),.PCURVE_S1.);+#2237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2238,#2239),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2260 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));-#2261 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));-#2262 = PCURVE('',#921,#2263);-#2263 = DEFINITIONAL_REPRESENTATION('',(#2264),#2267);-#2264 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2265,#2266),.UNSPECIFIED.,.F.,+#2238 = CARTESIAN_POINT('',(-0.705,-1.45,0.45));+#2239 = CARTESIAN_POINT('',(-0.705,-1.45,0.6));+#2240 = PCURVE('',#899,#2241);+#2241 = DEFINITIONAL_REPRESENTATION('',(#2242),#2245);+#2242 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2243,#2244),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2265 = CARTESIAN_POINT('',(0.,-0.15));-#2266 = CARTESIAN_POINT('',(0.,0.));-#2267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#2243 = CARTESIAN_POINT('',(0.,-0.15));+#2244 = CARTESIAN_POINT('',(0.,0.));+#2245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2268 = PCURVE('',#1025,#2269);-#2269 = DEFINITIONAL_REPRESENTATION('',(#2270),#2273);-#2270 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2271,#2272),.UNSPECIFIED.,.F.,+#2246 = PCURVE('',#1003,#2247);+#2247 = DEFINITIONAL_REPRESENTATION('',(#2248),#2251);+#2248 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2249,#2250),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2271 = CARTESIAN_POINT('',(1.41,-0.15));-#2272 = CARTESIAN_POINT('',(1.41,0.));-#2273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2274 = ADVANCED_FACE('',(#2275),#993,.F.);-#2275 = FACE_BOUND('',#2276,.F.);-#2276 = EDGE_LOOP('',(#2277,#2278,#2298,#2319));-#2277 = ORIENTED_EDGE('',*,*,#979,.T.);-#2278 = ORIENTED_EDGE('',*,*,#2279,.T.);-#2279 = EDGE_CURVE('',#958,#2280,#2282,.T.);-#2280 = VERTEX_POINT('',#2281);-#2281 = CARTESIAN_POINT('',(0.705,-1.45,0.9));-#2282 = SURFACE_CURVE('',#2283,(#2286,#2292),.PCURVE_S1.);-#2283 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2284,#2285),.UNSPECIFIED.,.F.,+#2249 = CARTESIAN_POINT('',(1.41,-0.15));+#2250 = CARTESIAN_POINT('',(1.41,0.));+#2251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2252 = ADVANCED_FACE('',(#2253),#971,.F.);+#2253 = FACE_BOUND('',#2254,.F.);+#2254 = EDGE_LOOP('',(#2255,#2256,#2276,#2297));+#2255 = ORIENTED_EDGE('',*,*,#957,.T.);+#2256 = ORIENTED_EDGE('',*,*,#2257,.T.);+#2257 = EDGE_CURVE('',#936,#2258,#2260,.T.);+#2258 = VERTEX_POINT('',#2259);+#2259 = CARTESIAN_POINT('',(0.705,-1.45,0.6));+#2260 = SURFACE_CURVE('',#2261,(#2264,#2270),.PCURVE_S1.);+#2261 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2262,#2263),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2284 = CARTESIAN_POINT('',(0.705,-1.45,0.75));-#2285 = CARTESIAN_POINT('',(0.705,-1.45,0.9));-#2286 = PCURVE('',#993,#2287);-#2287 = DEFINITIONAL_REPRESENTATION('',(#2288),#2291);-#2288 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2289,#2290),.UNSPECIFIED.,.F.,+#2262 = CARTESIAN_POINT('',(0.705,-1.45,0.45));+#2263 = CARTESIAN_POINT('',(0.705,-1.45,0.6));+#2264 = PCURVE('',#971,#2265);+#2265 = DEFINITIONAL_REPRESENTATION('',(#2266),#2269);+#2266 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2267,#2268),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2289 = CARTESIAN_POINT('',(0.134350288425,-0.15));-#2290 = CARTESIAN_POINT('',(0.134350288425,0.));-#2291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#2267 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#2268 = CARTESIAN_POINT('',(0.134350288425,0.));+#2269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2292 = PCURVE('',#1025,#2293);-#2293 = DEFINITIONAL_REPRESENTATION('',(#2294),#2297);-#2294 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2295,#2296),.UNSPECIFIED.,.F.,+#2270 = PCURVE('',#1003,#2271);+#2271 = DEFINITIONAL_REPRESENTATION('',(#2272),#2275);+#2272 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2273,#2274),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2295 = CARTESIAN_POINT('',(0.,-0.15));-#2296 = CARTESIAN_POINT('',(0.,0.));-#2297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2298 = ORIENTED_EDGE('',*,*,#2299,.F.);-#2299 = EDGE_CURVE('',#2189,#2280,#2300,.T.);-#2300 = SURFACE_CURVE('',#2301,(#2305,#2312),.PCURVE_S1.);-#2301 = LINE('',#2302,#2303);-#2302 = CARTESIAN_POINT('',(0.8,-1.355,0.9));-#2303 = VECTOR('',#2304,1.);-#2304 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#2305 = PCURVE('',#993,#2306);-#2306 = DEFINITIONAL_REPRESENTATION('',(#2307),#2311);-#2307 = LINE('',#2308,#2309);-#2308 = CARTESIAN_POINT('',(0.,0.));-#2309 = VECTOR('',#2310,1.);-#2310 = DIRECTION('',(1.,0.));-#2311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2312 = PCURVE('',#1442,#2313);-#2313 = DEFINITIONAL_REPRESENTATION('',(#2314),#2318);-#2314 = LINE('',#2315,#2316);-#2315 = CARTESIAN_POINT('',(0.8,2.7925));-#2316 = VECTOR('',#2317,1.);-#2317 = DIRECTION('',(-0.707106781187,0.707106781187));-#2318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2319 = ORIENTED_EDGE('',*,*,#2188,.F.);-#2320 = ADVANCED_FACE('',(#2321),#1025,.F.);-#2321 = FACE_BOUND('',#2322,.F.);-#2322 = EDGE_LOOP('',(#2323,#2324,#2325,#2346));-#2323 = ORIENTED_EDGE('',*,*,#1011,.T.);-#2324 = ORIENTED_EDGE('',*,*,#2257,.T.);-#2325 = ORIENTED_EDGE('',*,*,#2326,.F.);-#2326 = EDGE_CURVE('',#2280,#2235,#2327,.T.);-#2327 = SURFACE_CURVE('',#2328,(#2332,#2339),.PCURVE_S1.);-#2328 = LINE('',#2329,#2330);-#2329 = CARTESIAN_POINT('',(0.705,-1.45,0.9));-#2330 = VECTOR('',#2331,1.);-#2331 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#2332 = PCURVE('',#1025,#2333);-#2333 = DEFINITIONAL_REPRESENTATION('',(#2334),#2338);-#2334 = LINE('',#2335,#2336);-#2335 = CARTESIAN_POINT('',(0.,0.));-#2336 = VECTOR('',#2337,1.);-#2337 = DIRECTION('',(1.,0.));-#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2339 = PCURVE('',#1442,#2340);-#2340 = DEFINITIONAL_REPRESENTATION('',(#2341),#2345);-#2341 = LINE('',#2342,#2343);-#2342 = CARTESIAN_POINT('',(0.705,2.8875));-#2343 = VECTOR('',#2344,1.);-#2344 = DIRECTION('',(-1.,-4.08998344385E-17));-#2345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2346 = ORIENTED_EDGE('',*,*,#2279,.F.);-#2347 = ADVANCED_FACE('',(#2348),#1319,.F.);-#2348 = FACE_BOUND('',#2349,.F.);-#2349 = EDGE_LOOP('',(#2350,#2373,#2401,#2422,#2423,#2446));-#2350 = ORIENTED_EDGE('',*,*,#2351,.F.);-#2351 = EDGE_CURVE('',#2352,#1725,#2354,.T.);-#2352 = VERTEX_POINT('',#2353);-#2353 = CARTESIAN_POINT('',(-0.85,0.7,0.9));-#2354 = SURFACE_CURVE('',#2355,(#2359,#2366),.PCURVE_S1.);-#2355 = LINE('',#2356,#2357);-#2356 = CARTESIAN_POINT('',(-0.85,0.7,0.9));-#2357 = VECTOR('',#2358,1.);-#2358 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#2359 = PCURVE('',#1319,#2360);-#2360 = DEFINITIONAL_REPRESENTATION('',(#2361),#2365);-#2361 = LINE('',#2362,#2363);-#2362 = CARTESIAN_POINT('',(0.,-0.));-#2363 = VECTOR('',#2364,1.);-#2364 = DIRECTION('',(1.,0.));-#2365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2366 = PCURVE('',#1740,#2367);-#2367 = DEFINITIONAL_REPRESENTATION('',(#2368),#2372);-#2368 = LINE('',#2369,#2370);-#2369 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#2370 = VECTOR('',#2371,1.);-#2371 = DIRECTION('',(0.,1.));-#2372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2373 = ORIENTED_EDGE('',*,*,#2374,.T.);-#2374 = EDGE_CURVE('',#2352,#2375,#2377,.T.);-#2375 = VERTEX_POINT('',#2376);-#2376 = CARTESIAN_POINT('',(-0.85,1.2,0.9));-#2377 = SURFACE_CURVE('',#2378,(#2382,#2389),.PCURVE_S1.);-#2378 = LINE('',#2379,#2380);-#2379 = CARTESIAN_POINT('',(-0.85,0.7,0.9));-#2380 = VECTOR('',#2381,1.);-#2381 = DIRECTION('',(1.144237745222E-17,1.,0.));-#2382 = PCURVE('',#1319,#2383);-#2383 = DEFINITIONAL_REPRESENTATION('',(#2384),#2388);-#2384 = LINE('',#2385,#2386);-#2385 = CARTESIAN_POINT('',(0.,-0.));-#2386 = VECTOR('',#2387,1.);-#2387 = DIRECTION('',(0.,-1.));-#2388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2389 = PCURVE('',#2390,#2395);-#2390 = CYLINDRICAL_SURFACE('',#2391,0.25);-#2391 = AXIS2_PLACEMENT_3D('',#2392,#2393,#2394);-#2392 = CARTESIAN_POINT('',(-0.85,0.7,0.65));-#2393 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#2394 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#2395 = DEFINITIONAL_REPRESENTATION('',(#2396),#2400);-#2396 = LINE('',#2397,#2398);-#2397 = CARTESIAN_POINT('',(4.886921905584,0.));-#2398 = VECTOR('',#2399,1.);-#2399 = DIRECTION('',(0.,-1.));-#2400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2401 = ORIENTED_EDGE('',*,*,#2402,.T.);-#2402 = EDGE_CURVE('',#2375,#1304,#2403,.T.);-#2403 = SURFACE_CURVE('',#2404,(#2408,#2415),.PCURVE_S1.);-#2404 = LINE('',#2405,#2406);-#2405 = CARTESIAN_POINT('',(-0.85,1.2,0.9));-#2406 = VECTOR('',#2407,1.);-#2407 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#2408 = PCURVE('',#1319,#2409);-#2409 = DEFINITIONAL_REPRESENTATION('',(#2410),#2414);-#2410 = LINE('',#2411,#2412);-#2411 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#2412 = VECTOR('',#2413,1.);-#2413 = DIRECTION('',(1.,0.));-#2414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2415 = PCURVE('',#1821,#2416);-#2416 = DEFINITIONAL_REPRESENTATION('',(#2417),#2421);-#2417 = LINE('',#2418,#2419);-#2418 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#2419 = VECTOR('',#2420,1.);-#2420 = DIRECTION('',(0.,1.));-#2421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2422 = ORIENTED_EDGE('',*,*,#1303,.T.);-#2423 = ORIENTED_EDGE('',*,*,#2424,.F.);-#2424 = EDGE_CURVE('',#2425,#1276,#2427,.T.);-#2425 = VERTEX_POINT('',#2426);-#2426 = CARTESIAN_POINT('',(-0.775,0.7,0.9));-#2427 = SURFACE_CURVE('',#2428,(#2432,#2439),.PCURVE_S1.);-#2428 = LINE('',#2429,#2430);-#2429 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2430 = VECTOR('',#2431,1.);-#2431 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2432 = PCURVE('',#1319,#2433);-#2433 = DEFINITIONAL_REPRESENTATION('',(#2434),#2438);-#2434 = LINE('',#2435,#2436);-#2435 = CARTESIAN_POINT('',(7.5E-02,2.0425));-#2436 = VECTOR('',#2437,1.);-#2437 = DIRECTION('',(-1.224646799147E-16,-1.));-#2438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2439 = PCURVE('',#1291,#2440);-#2440 = DEFINITIONAL_REPRESENTATION('',(#2441),#2445);-#2441 = LINE('',#2442,#2443);-#2442 = CARTESIAN_POINT('',(0.,7.505680478377E-16));-#2443 = VECTOR('',#2444,1.);-#2444 = DIRECTION('',(1.,-3.820719577039E-16));-#2445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2446 = ORIENTED_EDGE('',*,*,#2447,.F.);-#2447 = EDGE_CURVE('',#1725,#2425,#2448,.T.);-#2448 = SURFACE_CURVE('',#2449,(#2453,#2460),.PCURVE_S1.);-#2449 = LINE('',#2450,#2451);-#2450 = CARTESIAN_POINT('',(-0.85,0.7,0.9));-#2451 = VECTOR('',#2452,1.);-#2452 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#2453 = PCURVE('',#1319,#2454);-#2454 = DEFINITIONAL_REPRESENTATION('',(#2455),#2459);+#2273 = CARTESIAN_POINT('',(0.,-0.15));+#2274 = CARTESIAN_POINT('',(0.,0.));+#2275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2276 = ORIENTED_EDGE('',*,*,#2277,.F.);+#2277 = EDGE_CURVE('',#2167,#2258,#2278,.T.);+#2278 = SURFACE_CURVE('',#2279,(#2283,#2290),.PCURVE_S1.);+#2279 = LINE('',#2280,#2281);+#2280 = CARTESIAN_POINT('',(0.8,-1.355,0.6));+#2281 = VECTOR('',#2282,1.);+#2282 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2283 = PCURVE('',#971,#2284);+#2284 = DEFINITIONAL_REPRESENTATION('',(#2285),#2289);+#2285 = LINE('',#2286,#2287);+#2286 = CARTESIAN_POINT('',(0.,0.));+#2287 = VECTOR('',#2288,1.);+#2288 = DIRECTION('',(1.,0.));+#2289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2290 = PCURVE('',#1420,#2291);+#2291 = DEFINITIONAL_REPRESENTATION('',(#2292),#2296);+#2292 = LINE('',#2293,#2294);+#2293 = CARTESIAN_POINT('',(0.8,2.7925));+#2294 = VECTOR('',#2295,1.);+#2295 = DIRECTION('',(-0.707106781187,0.707106781187));+#2296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2297 = ORIENTED_EDGE('',*,*,#2166,.F.);+#2298 = ADVANCED_FACE('',(#2299),#1003,.F.);+#2299 = FACE_BOUND('',#2300,.F.);+#2300 = EDGE_LOOP('',(#2301,#2302,#2303,#2324));+#2301 = ORIENTED_EDGE('',*,*,#989,.T.);+#2302 = ORIENTED_EDGE('',*,*,#2235,.T.);+#2303 = ORIENTED_EDGE('',*,*,#2304,.F.);+#2304 = EDGE_CURVE('',#2258,#2213,#2305,.T.);+#2305 = SURFACE_CURVE('',#2306,(#2310,#2317),.PCURVE_S1.);+#2306 = LINE('',#2307,#2308);+#2307 = CARTESIAN_POINT('',(0.705,-1.45,0.6));+#2308 = VECTOR('',#2309,1.);+#2309 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2310 = PCURVE('',#1003,#2311);+#2311 = DEFINITIONAL_REPRESENTATION('',(#2312),#2316);+#2312 = LINE('',#2313,#2314);+#2313 = CARTESIAN_POINT('',(0.,0.));+#2314 = VECTOR('',#2315,1.);+#2315 = DIRECTION('',(1.,0.));+#2316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2317 = PCURVE('',#1420,#2318);+#2318 = DEFINITIONAL_REPRESENTATION('',(#2319),#2323);+#2319 = LINE('',#2320,#2321);+#2320 = CARTESIAN_POINT('',(0.705,2.8875));+#2321 = VECTOR('',#2322,1.);+#2322 = DIRECTION('',(-1.,-4.08998344385E-17));+#2323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2324 = ORIENTED_EDGE('',*,*,#2257,.F.);+#2325 = ADVANCED_FACE('',(#2326),#1297,.F.);+#2326 = FACE_BOUND('',#2327,.F.);+#2327 = EDGE_LOOP('',(#2328,#2351,#2379,#2400,#2401,#2424));+#2328 = ORIENTED_EDGE('',*,*,#2329,.F.);+#2329 = EDGE_CURVE('',#2330,#1703,#2332,.T.);+#2330 = VERTEX_POINT('',#2331);+#2331 = CARTESIAN_POINT('',(-0.85,0.775,0.6));+#2332 = SURFACE_CURVE('',#2333,(#2337,#2344),.PCURVE_S1.);+#2333 = LINE('',#2334,#2335);+#2334 = CARTESIAN_POINT('',(-0.85,0.775,0.6));+#2335 = VECTOR('',#2336,1.);+#2336 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2337 = PCURVE('',#1297,#2338);+#2338 = DEFINITIONAL_REPRESENTATION('',(#2339),#2343);+#2339 = LINE('',#2340,#2341);+#2340 = CARTESIAN_POINT('',(0.,-0.));+#2341 = VECTOR('',#2342,1.);+#2342 = DIRECTION('',(1.,0.));+#2343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2344 = PCURVE('',#1718,#2345);+#2345 = DEFINITIONAL_REPRESENTATION('',(#2346),#2350);+#2346 = LINE('',#2347,#2348);+#2347 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#2348 = VECTOR('',#2349,1.);+#2349 = DIRECTION('',(0.,1.));+#2350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2351 = ORIENTED_EDGE('',*,*,#2352,.T.);+#2352 = EDGE_CURVE('',#2330,#2353,#2355,.T.);+#2353 = VERTEX_POINT('',#2354);+#2354 = CARTESIAN_POINT('',(-0.85,1.125,0.6));+#2355 = SURFACE_CURVE('',#2356,(#2360,#2367),.PCURVE_S1.);+#2356 = LINE('',#2357,#2358);+#2357 = CARTESIAN_POINT('',(-0.85,0.775,0.6));+#2358 = VECTOR('',#2359,1.);+#2359 = DIRECTION('',(1.144237745222E-17,1.,0.));+#2360 = PCURVE('',#1297,#2361);+#2361 = DEFINITIONAL_REPRESENTATION('',(#2362),#2366);+#2362 = LINE('',#2363,#2364);+#2363 = CARTESIAN_POINT('',(0.,-0.));+#2364 = VECTOR('',#2365,1.);+#2365 = DIRECTION('',(0.,-1.));+#2366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2367 = PCURVE('',#2368,#2373);+#2368 = CYLINDRICAL_SURFACE('',#2369,0.25);+#2369 = AXIS2_PLACEMENT_3D('',#2370,#2371,#2372);+#2370 = CARTESIAN_POINT('',(-0.85,0.775,0.35));+#2371 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2372 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#2373 = DEFINITIONAL_REPRESENTATION('',(#2374),#2378);+#2374 = LINE('',#2375,#2376);+#2375 = CARTESIAN_POINT('',(4.886921905584,0.));+#2376 = VECTOR('',#2377,1.);+#2377 = DIRECTION('',(0.,-1.));+#2378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2379 = ORIENTED_EDGE('',*,*,#2380,.T.);+#2380 = EDGE_CURVE('',#2353,#1282,#2381,.T.);+#2381 = SURFACE_CURVE('',#2382,(#2386,#2393),.PCURVE_S1.);+#2382 = LINE('',#2383,#2384);+#2383 = CARTESIAN_POINT('',(-0.85,1.125,0.6));+#2384 = VECTOR('',#2385,1.);+#2385 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2386 = PCURVE('',#1297,#2387);+#2387 = DEFINITIONAL_REPRESENTATION('',(#2388),#2392);+#2388 = LINE('',#2389,#2390);+#2389 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#2390 = VECTOR('',#2391,1.);+#2391 = DIRECTION('',(1.,0.));+#2392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2393 = PCURVE('',#1799,#2394);+#2394 = DEFINITIONAL_REPRESENTATION('',(#2395),#2399);+#2395 = LINE('',#2396,#2397);+#2396 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#2397 = VECTOR('',#2398,1.);+#2398 = DIRECTION('',(0.,1.));+#2399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2400 = ORIENTED_EDGE('',*,*,#1281,.T.);+#2401 = ORIENTED_EDGE('',*,*,#2402,.F.);+#2402 = EDGE_CURVE('',#2403,#1254,#2405,.T.);+#2403 = VERTEX_POINT('',#2404);+#2404 = CARTESIAN_POINT('',(-0.775,0.775,0.6));+#2405 = SURFACE_CURVE('',#2406,(#2410,#2417),.PCURVE_S1.);+#2406 = LINE('',#2407,#2408);+#2407 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2408 = VECTOR('',#2409,1.);+#2409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2410 = PCURVE('',#1297,#2411);+#2411 = DEFINITIONAL_REPRESENTATION('',(#2412),#2416);+#2412 = LINE('',#2413,#2414);+#2413 = CARTESIAN_POINT('',(7.5E-02,2.1175));+#2414 = VECTOR('',#2415,1.);+#2415 = DIRECTION('',(-1.224646799147E-16,-1.));+#2416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2417 = PCURVE('',#1269,#2418);+#2418 = DEFINITIONAL_REPRESENTATION('',(#2419),#2423);+#2419 = LINE('',#2420,#2421);+#2420 = CARTESIAN_POINT('',(0.,-4.258627128074E-16));+#2421 = VECTOR('',#2422,1.);+#2422 = DIRECTION('',(1.,2.498113734705E-16));+#2423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2424 = ORIENTED_EDGE('',*,*,#2425,.F.);+#2425 = EDGE_CURVE('',#1703,#2403,#2426,.T.);+#2426 = SURFACE_CURVE('',#2427,(#2431,#2438),.PCURVE_S1.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(-0.85,0.775,0.6));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2431 = PCURVE('',#1297,#2432);+#2432 = DEFINITIONAL_REPRESENTATION('',(#2433),#2437);+#2433 = LINE('',#2434,#2435);+#2434 = CARTESIAN_POINT('',(0.,-0.));+#2435 = VECTOR('',#2436,1.);+#2436 = DIRECTION('',(1.,0.));+#2437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2438 = PCURVE('',#1744,#2439);+#2439 = DEFINITIONAL_REPRESENTATION('',(#2440),#2444);+#2440 = LINE('',#2441,#2442);+#2441 = CARTESIAN_POINT('',(-0.85,0.6625));+#2442 = VECTOR('',#2443,1.);+#2443 = DIRECTION('',(1.,1.633645143532E-16));+#2444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2445 = ADVANCED_FACE('',(#2446),#1269,.F.);+#2446 = FACE_BOUND('',#2447,.F.);+#2447 = EDGE_LOOP('',(#2448,#2473,#2501,#2524,#2552,#2573,#2574,#2575,+ #2597,#2624));+#2448 = ORIENTED_EDGE('',*,*,#2449,.T.);+#2449 = EDGE_CURVE('',#2450,#2452,#2454,.T.);+#2450 = VERTEX_POINT('',#2451);+#2451 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2452 = VERTEX_POINT('',#2453);+#2453 = CARTESIAN_POINT('',(-0.775,-1.125,0.6));+#2454 = SURFACE_CURVE('',#2455,(#2459,#2466),.PCURVE_S1.); #2455 = LINE('',#2456,#2457);-#2456 = CARTESIAN_POINT('',(0.,-0.));+#2456 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6)); #2457 = VECTOR('',#2458,1.);-#2458 = DIRECTION('',(1.,0.));-#2459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2460 = PCURVE('',#1766,#2461);-#2461 = DEFINITIONAL_REPRESENTATION('',(#2462),#2466);-#2462 = LINE('',#2463,#2464);-#2463 = CARTESIAN_POINT('',(-0.85,0.7375));-#2464 = VECTOR('',#2465,1.);-#2465 = DIRECTION('',(1.,1.633645143532E-16));-#2466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2467 = ADVANCED_FACE('',(#2468),#1291,.F.);-#2468 = FACE_BOUND('',#2469,.F.);-#2469 = EDGE_LOOP('',(#2470,#2495,#2523,#2546,#2574,#2595,#2596,#2597,- #2619,#2646));-#2470 = ORIENTED_EDGE('',*,*,#2471,.T.);-#2471 = EDGE_CURVE('',#2472,#2474,#2476,.T.);-#2472 = VERTEX_POINT('',#2473);-#2473 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2474 = VERTEX_POINT('',#2475);-#2475 = CARTESIAN_POINT('',(-0.775,-1.2,0.9));-#2476 = SURFACE_CURVE('',#2477,(#2481,#2488),.PCURVE_S1.);-#2477 = LINE('',#2478,#2479);-#2478 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2479 = VECTOR('',#2480,1.);-#2480 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2481 = PCURVE('',#1291,#2482);-#2482 = DEFINITIONAL_REPRESENTATION('',(#2483),#2487);-#2483 = LINE('',#2484,#2485);-#2484 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));-#2485 = VECTOR('',#2486,1.);-#2486 = DIRECTION('',(1.,2.178642469984E-16));-#2487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2488 = PCURVE('',#1442,#2489);-#2489 = DEFINITIONAL_REPRESENTATION('',(#2490),#2494);-#2490 = LINE('',#2491,#2492);-#2491 = CARTESIAN_POINT('',(-0.775,2.78));-#2492 = VECTOR('',#2493,1.);-#2493 = DIRECTION('',(4.08998344385E-17,-1.));-#2494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2495 = ORIENTED_EDGE('',*,*,#2496,.T.);-#2496 = EDGE_CURVE('',#2474,#2497,#2499,.T.);-#2497 = VERTEX_POINT('',#2498);-#2498 = CARTESIAN_POINT('',(-0.775,-0.7,0.9));-#2499 = SURFACE_CURVE('',#2500,(#2504,#2511),.PCURVE_S1.);-#2500 = LINE('',#2501,#2502);-#2501 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2502 = VECTOR('',#2503,1.);-#2503 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2504 = PCURVE('',#1291,#2505);-#2505 = DEFINITIONAL_REPRESENTATION('',(#2506),#2510);+#2458 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2459 = PCURVE('',#1269,#2460);+#2460 = DEFINITIONAL_REPRESENTATION('',(#2461),#2465);+#2461 = LINE('',#2462,#2463);+#2462 = CARTESIAN_POINT('',(1.099090803126E-16,2.017322039476E-16));+#2463 = VECTOR('',#2464,1.);+#2464 = DIRECTION('',(1.,-6.776394184736E-16));+#2465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2466 = PCURVE('',#1420,#2467);+#2467 = DEFINITIONAL_REPRESENTATION('',(#2468),#2472);+#2468 = LINE('',#2469,#2470);+#2469 = CARTESIAN_POINT('',(-0.775,2.78));+#2470 = VECTOR('',#2471,1.);+#2471 = DIRECTION('',(4.08998344385E-17,-1.));+#2472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2473 = ORIENTED_EDGE('',*,*,#2474,.T.);+#2474 = EDGE_CURVE('',#2452,#2475,#2477,.T.);+#2475 = VERTEX_POINT('',#2476);+#2476 = CARTESIAN_POINT('',(-0.775,-0.775,0.6));+#2477 = SURFACE_CURVE('',#2478,(#2482,#2489),.PCURVE_S1.);+#2478 = LINE('',#2479,#2480);+#2479 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2480 = VECTOR('',#2481,1.);+#2481 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2482 = PCURVE('',#1269,#2483);+#2483 = DEFINITIONAL_REPRESENTATION('',(#2484),#2488);+#2484 = LINE('',#2485,#2486);+#2485 = CARTESIAN_POINT('',(0.,-8.462982660719E-17));+#2486 = VECTOR('',#2487,1.);+#2487 = DIRECTION('',(1.,6.389676185599E-16));+#2488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2489 = PCURVE('',#2490,#2495);+#2490 = PLANE('',#2491);+#2491 = AXIS2_PLACEMENT_3D('',#2492,#2493,#2494);+#2492 = CARTESIAN_POINT('',(-0.85,-1.125,0.6));+#2493 = DIRECTION('',(0.,0.,-1.));+#2494 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2495 = DEFINITIONAL_REPRESENTATION('',(#2496),#2500);+#2496 = LINE('',#2497,#2498);+#2497 = CARTESIAN_POINT('',(7.5E-02,0.2175));+#2498 = VECTOR('',#2499,1.);+#2499 = DIRECTION('',(-1.224646799147E-16,-1.));+#2500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2501 = ORIENTED_EDGE('',*,*,#2502,.T.);+#2502 = EDGE_CURVE('',#2475,#2503,#2505,.T.);+#2503 = VERTEX_POINT('',#2504);+#2504 = CARTESIAN_POINT('',(-0.775,-0.175,0.6));+#2505 = SURFACE_CURVE('',#2506,(#2510,#2517),.PCURVE_S1.); #2506 = LINE('',#2507,#2508);-#2507 = CARTESIAN_POINT('',(-2.775557561563E-17,-5.948107097195E-17));+#2507 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6)); #2508 = VECTOR('',#2509,1.);-#2509 = DIRECTION('',(1.,-1.412411194201E-16));-#2510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2511 = PCURVE('',#2512,#2517);-#2512 = PLANE('',#2513);-#2513 = AXIS2_PLACEMENT_3D('',#2514,#2515,#2516);-#2514 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));-#2515 = DIRECTION('',(0.,0.,-1.));-#2516 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#2517 = DEFINITIONAL_REPRESENTATION('',(#2518),#2522);-#2518 = LINE('',#2519,#2520);-#2519 = CARTESIAN_POINT('',(7.5E-02,0.1425));-#2520 = VECTOR('',#2521,1.);-#2521 = DIRECTION('',(-1.224646799147E-16,-1.));-#2522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2523 = ORIENTED_EDGE('',*,*,#2524,.T.);-#2524 = EDGE_CURVE('',#2497,#2525,#2527,.T.);-#2525 = VERTEX_POINT('',#2526);-#2526 = CARTESIAN_POINT('',(-0.775,-0.25,0.9));-#2527 = SURFACE_CURVE('',#2528,(#2532,#2539),.PCURVE_S1.);-#2528 = LINE('',#2529,#2530);-#2529 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2530 = VECTOR('',#2531,1.);-#2531 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2532 = PCURVE('',#1291,#2533);-#2533 = DEFINITIONAL_REPRESENTATION('',(#2534),#2538);-#2534 = LINE('',#2535,#2536);-#2535 = CARTESIAN_POINT('',(1.110223024625E-16,-1.502672009293E-16));-#2536 = VECTOR('',#2537,1.);-#2537 = DIRECTION('',(1.,6.025016332056E-20));-#2538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2539 = PCURVE('',#1604,#2540);-#2540 = DEFINITIONAL_REPRESENTATION('',(#2541),#2545);-#2541 = LINE('',#2542,#2543);-#2542 = CARTESIAN_POINT('',(-0.775,2.78));-#2543 = VECTOR('',#2544,1.);-#2544 = DIRECTION('',(4.08998344385E-17,-1.));-#2545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2546 = ORIENTED_EDGE('',*,*,#2547,.T.);-#2547 = EDGE_CURVE('',#2525,#2548,#2550,.T.);-#2548 = VERTEX_POINT('',#2549);-#2549 = CARTESIAN_POINT('',(-0.775,0.25,0.9));-#2550 = SURFACE_CURVE('',#2551,(#2555,#2562),.PCURVE_S1.);-#2551 = LINE('',#2552,#2553);-#2552 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2553 = VECTOR('',#2554,1.);-#2554 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2555 = PCURVE('',#1291,#2556);-#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2561);-#2557 = LINE('',#2558,#2559);-#2558 = CARTESIAN_POINT('',(0.,-9.873524917488E-17));-#2559 = VECTOR('',#2560,1.);-#2560 = DIRECTION('',(1.,-4.71085843945E-17));-#2561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2562 = PCURVE('',#2563,#2568);-#2563 = PLANE('',#2564);-#2564 = AXIS2_PLACEMENT_3D('',#2565,#2566,#2567);-#2565 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));-#2566 = DIRECTION('',(0.,0.,-1.));-#2567 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#2568 = DEFINITIONAL_REPRESENTATION('',(#2569),#2573);-#2569 = LINE('',#2570,#2571);-#2570 = CARTESIAN_POINT('',(7.5E-02,1.0925));-#2571 = VECTOR('',#2572,1.);-#2572 = DIRECTION('',(-1.224646799147E-16,-1.));-#2573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2574 = ORIENTED_EDGE('',*,*,#2575,.T.);-#2575 = EDGE_CURVE('',#2548,#2425,#2576,.T.);-#2576 = SURFACE_CURVE('',#2577,(#2581,#2588),.PCURVE_S1.);-#2577 = LINE('',#2578,#2579);-#2578 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2579 = VECTOR('',#2580,1.);-#2580 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2581 = PCURVE('',#1291,#2582);-#2582 = DEFINITIONAL_REPRESENTATION('',(#2583),#2587);-#2583 = LINE('',#2584,#2585);-#2584 = CARTESIAN_POINT('',(0.,4.796894479417E-16));-#2585 = VECTOR('',#2586,1.);-#2586 = DIRECTION('',(1.,-3.199308092102E-16));-#2587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2588 = PCURVE('',#1766,#2589);-#2589 = DEFINITIONAL_REPRESENTATION('',(#2590),#2594);-#2590 = LINE('',#2591,#2592);-#2591 = CARTESIAN_POINT('',(-0.775,2.78));-#2592 = VECTOR('',#2593,1.);-#2593 = DIRECTION('',(4.08998344385E-17,-1.));-#2594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2595 = ORIENTED_EDGE('',*,*,#2424,.T.);-#2596 = ORIENTED_EDGE('',*,*,#1275,.T.);-#2597 = ORIENTED_EDGE('',*,*,#2598,.T.);-#2598 = EDGE_CURVE('',#1248,#2599,#2601,.T.);-#2599 = VERTEX_POINT('',#2600);-#2600 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));-#2601 = SURFACE_CURVE('',#2602,(#2605,#2612),.PCURVE_S1.);-#2602 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2603,#2604),.UNSPECIFIED.,.F.,+#2509 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2510 = PCURVE('',#1269,#2511);+#2511 = DEFINITIONAL_REPRESENTATION('',(#2512),#2516);+#2512 = LINE('',#2513,#2514);+#2513 = CARTESIAN_POINT('',(1.110223024625E-16,1.92905498175E-16));+#2514 = VECTOR('',#2515,1.);+#2515 = DIRECTION('',(1.,7.288424226013E-17));+#2516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2517 = PCURVE('',#1582,#2518);+#2518 = DEFINITIONAL_REPRESENTATION('',(#2519),#2523);+#2519 = LINE('',#2520,#2521);+#2520 = CARTESIAN_POINT('',(-0.775,2.78));+#2521 = VECTOR('',#2522,1.);+#2522 = DIRECTION('',(4.08998344385E-17,-1.));+#2523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2524 = ORIENTED_EDGE('',*,*,#2525,.T.);+#2525 = EDGE_CURVE('',#2503,#2526,#2528,.T.);+#2526 = VERTEX_POINT('',#2527);+#2527 = CARTESIAN_POINT('',(-0.775,0.175,0.6));+#2528 = SURFACE_CURVE('',#2529,(#2533,#2540),.PCURVE_S1.);+#2529 = LINE('',#2530,#2531);+#2530 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2531 = VECTOR('',#2532,1.);+#2532 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2533 = PCURVE('',#1269,#2534);+#2534 = DEFINITIONAL_REPRESENTATION('',(#2535),#2539);+#2535 = LINE('',#2536,#2537);+#2536 = CARTESIAN_POINT('',(0.,3.801197980797E-16));+#2537 = VECTOR('',#2538,1.);+#2538 = DIRECTION('',(1.,-1.249155788728E-16));+#2539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2540 = PCURVE('',#2541,#2546);+#2541 = PLANE('',#2542);+#2542 = AXIS2_PLACEMENT_3D('',#2543,#2544,#2545);+#2543 = CARTESIAN_POINT('',(-0.85,-0.175,0.6));+#2544 = DIRECTION('',(0.,0.,-1.));+#2545 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#2546 = DEFINITIONAL_REPRESENTATION('',(#2547),#2551);+#2547 = LINE('',#2548,#2549);+#2548 = CARTESIAN_POINT('',(7.5E-02,1.1675));+#2549 = VECTOR('',#2550,1.);+#2550 = DIRECTION('',(-1.224646799147E-16,-1.));+#2551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2552 = ORIENTED_EDGE('',*,*,#2553,.T.);+#2553 = EDGE_CURVE('',#2526,#2403,#2554,.T.);+#2554 = SURFACE_CURVE('',#2555,(#2559,#2566),.PCURVE_S1.);+#2555 = LINE('',#2556,#2557);+#2556 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2557 = VECTOR('',#2558,1.);+#2558 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2559 = PCURVE('',#1269,#2560);+#2560 = DEFINITIONAL_REPRESENTATION('',(#2561),#2565);+#2561 = LINE('',#2562,#2563);+#2562 = CARTESIAN_POINT('',(0.,-1.179744090121E-16));+#2563 = VECTOR('',#2564,1.);+#2564 = DIRECTION('',(1.,1.457007140799E-16));+#2565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2566 = PCURVE('',#1744,#2567);+#2567 = DEFINITIONAL_REPRESENTATION('',(#2568),#2572);+#2568 = LINE('',#2569,#2570);+#2569 = CARTESIAN_POINT('',(-0.775,2.78));+#2570 = VECTOR('',#2571,1.);+#2571 = DIRECTION('',(4.08998344385E-17,-1.));+#2572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2573 = ORIENTED_EDGE('',*,*,#2402,.T.);+#2574 = ORIENTED_EDGE('',*,*,#1253,.T.);+#2575 = ORIENTED_EDGE('',*,*,#2576,.T.);+#2576 = EDGE_CURVE('',#1226,#2577,#2579,.T.);+#2577 = VERTEX_POINT('',#2578);+#2578 = CARTESIAN_POINT('',(-0.725810707854,1.317905353927,0.95));+#2579 = SURFACE_CURVE('',#2580,(#2583,#2590),.PCURVE_S1.);+#2580 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2581,#2582),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2603 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));-#2604 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));-#2605 = PCURVE('',#1291,#2606);-#2606 = DEFINITIONAL_REPRESENTATION('',(#2607),#2611);-#2607 = LINE('',#2608,#2609);-#2608 = CARTESIAN_POINT('',(2.685,-1.078724937203E-16));-#2609 = VECTOR('',#2610,1.);-#2610 = DIRECTION('',(0.,1.));+#2581 = CARTESIAN_POINT('',(-0.775,1.3425,0.6));+#2582 = CARTESIAN_POINT('',(-0.725810707854,1.317905353927,0.95));+#2583 = PCURVE('',#1269,#2584);+#2584 = DEFINITIONAL_REPRESENTATION('',(#2585),#2589);+#2585 = LINE('',#2586,#2587);+#2586 = CARTESIAN_POINT('',(2.685,2.506315049053E-16));+#2587 = VECTOR('',#2588,1.);+#2588 = DIRECTION('',(0.,1.));+#2589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2590 = PCURVE('',#1241,#2591);+#2591 = DEFINITIONAL_REPRESENTATION('',(#2592),#2596);+#2592 = LINE('',#2593,#2594);+#2593 = CARTESIAN_POINT('',(-7.188991775997E-17,1.905895346403E-17));+#2594 = VECTOR('',#2595,1.);+#2595 = DIRECTION('',(1.379904077185E-16,1.));+#2596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2597 = ORIENTED_EDGE('',*,*,#2598,.F.);+#2598 = EDGE_CURVE('',#2599,#2577,#2601,.T.);+#2599 = VERTEX_POINT('',#2600);+#2600 = CARTESIAN_POINT('',(-0.725810707854,-1.317905353927,0.95));+#2601 = SURFACE_CURVE('',#2602,(#2606,#2612),.PCURVE_S1.);+#2602 = LINE('',#2603,#2604);+#2603 = CARTESIAN_POINT('',(-0.725810707854,-1.317905353927,0.95));+#2604 = VECTOR('',#2605,1.);+#2605 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2606 = PCURVE('',#1269,#2607);+#2607 = DEFINITIONAL_REPRESENTATION('',(#2608),#2611);+#2608 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2609,#2610),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.635810707854),.PIECEWISE_BEZIER_KNOTS.);+#2609 = CARTESIAN_POINT('',(3.673471815182E-17,1.));+#2610 = CARTESIAN_POINT('',(2.685,1.)); #2611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2612 = PCURVE('',#1263,#2613);-#2613 = DEFINITIONAL_REPRESENTATION('',(#2614),#2618);-#2614 = LINE('',#2615,#2616);-#2615 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));-#2616 = VECTOR('',#2617,1.);-#2617 = DIRECTION('',(8.45698415413E-18,1.));-#2618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2619 = ORIENTED_EDGE('',*,*,#2620,.F.);-#2620 = EDGE_CURVE('',#2621,#2599,#2623,.T.);-#2621 = VERTEX_POINT('',#2622);-#2622 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));-#2623 = SURFACE_CURVE('',#2624,(#2628,#2634),.PCURVE_S1.);-#2624 = LINE('',#2625,#2626);-#2625 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));-#2626 = VECTOR('',#2627,1.);-#2627 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#2628 = PCURVE('',#1291,#2629);-#2629 = DEFINITIONAL_REPRESENTATION('',(#2630),#2633);-#2630 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2631,#2632),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);-#2631 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));-#2632 = CARTESIAN_POINT('',(2.685,1.));-#2633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2634 = PCURVE('',#2635,#2640);-#2635 = PLANE('',#2636);-#2636 = AXIS2_PLACEMENT_3D('',#2637,#2638,#2639);-#2637 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#2638 = DIRECTION('',(0.,0.,1.));-#2639 = DIRECTION('',(0.436386464522,-0.899759330922,0.));-#2640 = DEFINITIONAL_REPRESENTATION('',(#2641),#2645);-#2641 = LINE('',#2642,#2643);-#2642 = CARTESIAN_POINT('',(2.350722749133,-1.181035618933));-#2643 = VECTOR('',#2644,1.);-#2644 = DIRECTION('',(-0.899759330922,0.436386464522));-#2645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2646 = ORIENTED_EDGE('',*,*,#2647,.F.);-#2647 = EDGE_CURVE('',#2472,#2621,#2648,.T.);-#2648 = SURFACE_CURVE('',#2649,(#2652,#2659),.PCURVE_S1.);-#2649 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2650,#2651),.UNSPECIFIED.,.F.,+#2612 = PCURVE('',#2613,#2618);+#2613 = PLANE('',#2614);+#2614 = AXIS2_PLACEMENT_3D('',#2615,#2616,#2617);+#2615 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#2616 = DIRECTION('',(0.,0.,1.));+#2617 = DIRECTION('',(0.436721133329,-0.89959693847,0.));+#2618 = DEFINITIONAL_REPRESENTATION('',(#2619),#2623);+#2619 = LINE('',#2620,#2621);+#2620 = CARTESIAN_POINT('',(2.397970230492,-1.228494210481));+#2621 = VECTOR('',#2622,1.);+#2622 = DIRECTION('',(-0.89959693847,0.436721133329));+#2623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2624 = ORIENTED_EDGE('',*,*,#2625,.F.);+#2625 = EDGE_CURVE('',#2450,#2599,#2626,.T.);+#2626 = SURFACE_CURVE('',#2627,(#2630,#2637),.PCURVE_S1.);+#2627 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2628,#2629),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2650 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2651 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));-#2652 = PCURVE('',#1291,#2653);-#2653 = DEFINITIONAL_REPRESENTATION('',(#2654),#2658);-#2654 = LINE('',#2655,#2656);-#2655 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));-#2656 = VECTOR('',#2657,1.);-#2657 = DIRECTION('',(2.562097043264E-16,1.));-#2658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2659 = PCURVE('',#2660,#2665);-#2660 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#2661,#2662)- ,(#2663,#2664+#2628 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2629 = CARTESIAN_POINT('',(-0.725810707854,-1.317905353927,0.95));+#2630 = PCURVE('',#1269,#2631);+#2631 = DEFINITIONAL_REPRESENTATION('',(#2632),#2636);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(1.099090803126E-16,2.017322039476E-16));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(-7.317436216078E-17,1.));+#2636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2637 = PCURVE('',#2638,#2643);+#2638 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2639,#2640)+ ,(#2641,#2642 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#2661 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));-#2662 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));-#2663 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));-#2664 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));-#2665 = DEFINITIONAL_REPRESENTATION('',(#2666),#2670);-#2666 = LINE('',#2667,#2668);-#2667 = CARTESIAN_POINT('',(0.116672618896,-5.354896412738E-17));-#2668 = VECTOR('',#2669,1.);-#2669 = DIRECTION('',(-1.804112415016E-16,1.));-#2670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2671 = ADVANCED_FACE('',(#2672),#1263,.F.);-#2672 = FACE_BOUND('',#2673,.F.);-#2673 = EDGE_LOOP('',(#2674,#2675,#2697,#2717));-#2674 = ORIENTED_EDGE('',*,*,#1247,.T.);-#2675 = ORIENTED_EDGE('',*,*,#2676,.T.);-#2676 = EDGE_CURVE('',#1220,#2677,#2679,.T.);-#2677 = VERTEX_POINT('',#2678);-#2678 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#2679 = SURFACE_CURVE('',#2680,(#2683,#2690),.PCURVE_S1.);-#2680 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2681,#2682),.UNSPECIFIED.,.F.,+#2639 = CARTESIAN_POINT('',(-0.6925,-1.425,0.6));+#2640 = CARTESIAN_POINT('',(-0.667905353927,-1.375810707854,0.95));+#2641 = CARTESIAN_POINT('',(-0.775,-1.3425,0.6));+#2642 = CARTESIAN_POINT('',(-0.725810707854,-1.317905353927,0.95));+#2643 = DEFINITIONAL_REPRESENTATION('',(#2644),#2648);+#2644 = LINE('',#2645,#2646);+#2645 = CARTESIAN_POINT('',(0.116672618896,3.293702012679E-16));+#2646 = VECTOR('',#2647,1.);+#2647 = DIRECTION('',(8.326672684689E-17,1.));+#2648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2649 = ADVANCED_FACE('',(#2650),#1241,.F.);+#2650 = FACE_BOUND('',#2651,.F.);+#2651 = EDGE_LOOP('',(#2652,#2653,#2675,#2695));+#2652 = ORIENTED_EDGE('',*,*,#1225,.T.);+#2653 = ORIENTED_EDGE('',*,*,#2654,.T.);+#2654 = EDGE_CURVE('',#1198,#2655,#2657,.T.);+#2655 = VERTEX_POINT('',#2656);+#2656 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#2657 = SURFACE_CURVE('',#2658,(#2661,#2668),.PCURVE_S1.);+#2658 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2659,#2660),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2681 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));-#2682 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#2683 = PCURVE('',#1263,#2684);-#2684 = DEFINITIONAL_REPRESENTATION('',(#2685),#2689);-#2685 = LINE('',#2686,#2687);-#2686 = CARTESIAN_POINT('',(0.116672618896,-2.030544446125E-16));-#2687 = VECTOR('',#2688,1.);-#2688 = DIRECTION('',(-5.551115123126E-17,1.));-#2689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2690 = PCURVE('',#1235,#2691);-#2691 = DEFINITIONAL_REPRESENTATION('',(#2692),#2696);-#2692 = LINE('',#2693,#2694);-#2693 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));-#2694 = VECTOR('',#2695,1.);-#2695 = DIRECTION('',(-1.455904003942E-16,1.));-#2696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2697 = ORIENTED_EDGE('',*,*,#2698,.F.);-#2698 = EDGE_CURVE('',#2599,#2677,#2699,.T.);-#2699 = SURFACE_CURVE('',#2700,(#2704,#2710),.PCURVE_S1.);-#2700 = LINE('',#2701,#2702);-#2701 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));-#2702 = VECTOR('',#2703,1.);-#2703 = DIRECTION('',(0.707106781187,0.707106781187,0.));-#2704 = PCURVE('',#1263,#2705);-#2705 = DEFINITIONAL_REPRESENTATION('',(#2706),#2709);-#2706 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2707,#2708),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);-#2707 = CARTESIAN_POINT('',(5.637459626905E-17,1.));-#2708 = CARTESIAN_POINT('',(0.116672618896,1.));-#2709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2710 = PCURVE('',#2635,#2711);-#2711 = DEFINITIONAL_REPRESENTATION('',(#2712),#2716);-#2712 = LINE('',#2713,#2714);-#2713 = CARTESIAN_POINT('',(1.706334841543E-02,-4.920253837605E-02));-#2714 = VECTOR('',#2715,1.);-#2715 = DIRECTION('',(-0.327654096049,0.944797752613));-#2716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2717 = ORIENTED_EDGE('',*,*,#2598,.F.);-#2718 = ADVANCED_FACE('',(#2719),#1235,.F.);-#2719 = FACE_BOUND('',#2720,.F.);-#2720 = EDGE_LOOP('',(#2721,#2722,#2744,#2764));-#2721 = ORIENTED_EDGE('',*,*,#1219,.T.);-#2722 = ORIENTED_EDGE('',*,*,#2723,.T.);-#2723 = EDGE_CURVE('',#1192,#2724,#2726,.T.);-#2724 = VERTEX_POINT('',#2725);-#2725 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));-#2726 = SURFACE_CURVE('',#2727,(#2730,#2737),.PCURVE_S1.);-#2727 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2728,#2729),.UNSPECIFIED.,.F.,+#2659 = CARTESIAN_POINT('',(-0.6925,1.425,0.6));+#2660 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#2661 = PCURVE('',#1241,#2662);+#2662 = DEFINITIONAL_REPRESENTATION('',(#2663),#2667);+#2663 = LINE('',#2664,#2665);+#2664 = CARTESIAN_POINT('',(0.116672618896,2.966887552301E-16));+#2665 = VECTOR('',#2666,1.);+#2666 = DIRECTION('',(4.163336342344E-17,1.));+#2667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2668 = PCURVE('',#1213,#2669);+#2669 = DEFINITIONAL_REPRESENTATION('',(#2670),#2674);+#2670 = LINE('',#2671,#2672);+#2671 = CARTESIAN_POINT('',(1.731707792598E-16,1.593979877619E-16));+#2672 = VECTOR('',#2673,1.);+#2673 = DIRECTION('',(-2.942522148409E-17,1.));+#2674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2675 = ORIENTED_EDGE('',*,*,#2676,.F.);+#2676 = EDGE_CURVE('',#2577,#2655,#2677,.T.);+#2677 = SURFACE_CURVE('',#2678,(#2682,#2688),.PCURVE_S1.);+#2678 = LINE('',#2679,#2680);+#2679 = CARTESIAN_POINT('',(-0.725810707854,1.317905353927,0.95));+#2680 = VECTOR('',#2681,1.);+#2681 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2682 = PCURVE('',#1241,#2683);+#2683 = DEFINITIONAL_REPRESENTATION('',(#2684),#2687);+#2684 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2685,#2686),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,8.189053685758E-02),.PIECEWISE_BEZIER_KNOTS.);+#2685 = CARTESIAN_POINT('',(6.610048995849E-17,1.));+#2686 = CARTESIAN_POINT('',(0.116672618896,1.));+#2687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2688 = PCURVE('',#2613,#2689);+#2689 = DEFINITIONAL_REPRESENTATION('',(#2690),#2694);+#2690 = LINE('',#2691,#2692);+#2691 = CARTESIAN_POINT('',(2.680298732092E-02,-7.737997090654E-02));+#2692 = VECTOR('',#2693,1.);+#2693 = DIRECTION('',(-0.327302620662,0.944919570391));+#2694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2695 = ORIENTED_EDGE('',*,*,#2576,.F.);+#2696 = ADVANCED_FACE('',(#2697),#1213,.F.);+#2697 = FACE_BOUND('',#2698,.F.);+#2698 = EDGE_LOOP('',(#2699,#2700,#2722,#2742));+#2699 = ORIENTED_EDGE('',*,*,#1197,.T.);+#2700 = ORIENTED_EDGE('',*,*,#2701,.T.);+#2701 = EDGE_CURVE('',#1170,#2702,#2704,.T.);+#2702 = VERTEX_POINT('',#2703);+#2703 = CARTESIAN_POINT('',(0.667905353927,1.375810707854,0.95));+#2704 = SURFACE_CURVE('',#2705,(#2708,#2715),.PCURVE_S1.);+#2705 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2706,#2707),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2728 = CARTESIAN_POINT('',(0.6925,1.425,0.9));-#2729 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));-#2730 = PCURVE('',#1235,#2731);-#2731 = DEFINITIONAL_REPRESENTATION('',(#2732),#2736);-#2732 = LINE('',#2733,#2734);-#2733 = CARTESIAN_POINT('',(1.385,-1.143900318417E-16));-#2734 = VECTOR('',#2735,1.);-#2735 = DIRECTION('',(-2.22044604925E-16,1.));-#2736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2737 = PCURVE('',#1207,#2738);-#2738 = DEFINITIONAL_REPRESENTATION('',(#2739),#2743);-#2739 = LINE('',#2740,#2741);-#2740 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));-#2741 = VECTOR('',#2742,1.);-#2742 = DIRECTION('',(-2.626924014641E-16,1.));-#2743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2744 = ORIENTED_EDGE('',*,*,#2745,.F.);-#2745 = EDGE_CURVE('',#2677,#2724,#2746,.T.);-#2746 = SURFACE_CURVE('',#2747,(#2751,#2757),.PCURVE_S1.);-#2747 = LINE('',#2748,#2749);-#2748 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));-#2749 = VECTOR('',#2750,1.);-#2750 = DIRECTION('',(1.,1.110223024625E-16,0.));-#2751 = PCURVE('',#1235,#2752);-#2752 = DEFINITIONAL_REPRESENTATION('',(#2753),#2756);-#2753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2754,#2755),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,1.293648457444),.PIECEWISE_BEZIER_KNOTS.);-#2754 = CARTESIAN_POINT('',(-4.999922991079E-18,1.));-#2755 = CARTESIAN_POINT('',(1.385,1.));-#2756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2757 = PCURVE('',#2635,#2758);-#2758 = DEFINITIONAL_REPRESENTATION('',(#2759),#2763);-#2759 = LINE('',#2760,#2761);-#2760 = CARTESIAN_POINT('',(0.,0.));-#2761 = VECTOR('',#2762,1.);-#2762 = DIRECTION('',(0.436386464522,0.899759330922));-#2763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2764 = ORIENTED_EDGE('',*,*,#2676,.F.);-#2765 = ADVANCED_FACE('',(#2766),#1207,.F.);-#2766 = FACE_BOUND('',#2767,.F.);-#2767 = EDGE_LOOP('',(#2768,#2769,#2791,#2811));-#2768 = ORIENTED_EDGE('',*,*,#1191,.T.);-#2769 = ORIENTED_EDGE('',*,*,#2770,.T.);-#2770 = EDGE_CURVE('',#1164,#2771,#2773,.T.);-#2771 = VERTEX_POINT('',#2772);-#2772 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));-#2773 = SURFACE_CURVE('',#2774,(#2777,#2784),.PCURVE_S1.);-#2774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2775,#2776),.UNSPECIFIED.,.F.,+#2706 = CARTESIAN_POINT('',(0.6925,1.425,0.6));+#2707 = CARTESIAN_POINT('',(0.667905353927,1.375810707854,0.95));+#2708 = PCURVE('',#1213,#2709);+#2709 = DEFINITIONAL_REPRESENTATION('',(#2710),#2714);+#2710 = LINE('',#2711,#2712);+#2711 = CARTESIAN_POINT('',(1.385,2.955178933996E-16));+#2712 = VECTOR('',#2713,1.);+#2713 = DIRECTION('',(-2.22044604925E-16,1.));+#2714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2715 = PCURVE('',#1185,#2716);+#2716 = DEFINITIONAL_REPRESENTATION('',(#2717),#2721);+#2717 = LINE('',#2718,#2719);+#2718 = CARTESIAN_POINT('',(7.190486470684E-18,-1.362249252212E-17));+#2719 = VECTOR('',#2720,1.);+#2720 = DIRECTION('',(-5.210663175354E-17,1.));+#2721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2722 = ORIENTED_EDGE('',*,*,#2723,.F.);+#2723 = EDGE_CURVE('',#2655,#2702,#2724,.T.);+#2724 = SURFACE_CURVE('',#2725,(#2729,#2735),.PCURVE_S1.);+#2725 = LINE('',#2726,#2727);+#2726 = CARTESIAN_POINT('',(-0.667905353927,1.375810707854,0.95));+#2727 = VECTOR('',#2728,1.);+#2728 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2729 = PCURVE('',#1213,#2730);+#2730 = DEFINITIONAL_REPRESENTATION('',(#2731),#2734);+#2731 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2732,#2733),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.335810707854),.PIECEWISE_BEZIER_KNOTS.);+#2732 = CARTESIAN_POINT('',(1.437455577757E-16,1.));+#2733 = CARTESIAN_POINT('',(1.385,1.));+#2734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2735 = PCURVE('',#2613,#2736);+#2736 = DEFINITIONAL_REPRESENTATION('',(#2737),#2741);+#2737 = LINE('',#2738,#2739);+#2738 = CARTESIAN_POINT('',(0.,0.));+#2739 = VECTOR('',#2740,1.);+#2740 = DIRECTION('',(0.436721133329,0.89959693847));+#2741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2742 = ORIENTED_EDGE('',*,*,#2654,.F.);+#2743 = ADVANCED_FACE('',(#2744),#1185,.F.);+#2744 = FACE_BOUND('',#2745,.F.);+#2745 = EDGE_LOOP('',(#2746,#2747,#2769,#2789));+#2746 = ORIENTED_EDGE('',*,*,#1169,.T.);+#2747 = ORIENTED_EDGE('',*,*,#2748,.T.);+#2748 = EDGE_CURVE('',#1142,#2749,#2751,.T.);+#2749 = VERTEX_POINT('',#2750);+#2750 = CARTESIAN_POINT('',(0.725810707854,1.317905353927,0.95));+#2751 = SURFACE_CURVE('',#2752,(#2755,#2762),.PCURVE_S1.);+#2752 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2753,#2754),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2775 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#2776 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));-#2777 = PCURVE('',#1207,#2778);-#2778 = DEFINITIONAL_REPRESENTATION('',(#2779),#2783);-#2779 = LINE('',#2780,#2781);-#2780 = CARTESIAN_POINT('',(0.116672618896,-5.354896412738E-17));-#2781 = VECTOR('',#2782,1.);-#2782 = DIRECTION('',(-1.804112415016E-16,1.));-#2783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2784 = PCURVE('',#1179,#2785);-#2785 = DEFINITIONAL_REPRESENTATION('',(#2786),#2790);-#2786 = LINE('',#2787,#2788);-#2787 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));-#2788 = VECTOR('',#2789,1.);-#2789 = DIRECTION('',(2.562097043264E-16,1.));-#2790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2791 = ORIENTED_EDGE('',*,*,#2792,.F.);-#2792 = EDGE_CURVE('',#2724,#2771,#2793,.T.);-#2793 = SURFACE_CURVE('',#2794,(#2798,#2804),.PCURVE_S1.);-#2794 = LINE('',#2795,#2796);-#2795 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));-#2796 = VECTOR('',#2797,1.);-#2797 = DIRECTION('',(0.707106781187,-0.707106781187,0.));-#2798 = PCURVE('',#1207,#2799);-#2799 = DEFINITIONAL_REPRESENTATION('',(#2800),#2803);-#2800 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2801,#2802),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);-#2801 = CARTESIAN_POINT('',(-1.206891714386E-16,1.));-#2802 = CARTESIAN_POINT('',(0.116672618896,1.));-#2803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2804 = PCURVE('',#2635,#2805);-#2805 = DEFINITIONAL_REPRESENTATION('',(#2806),#2810);-#2806 = LINE('',#2807,#2808);-#2807 = CARTESIAN_POINT('',(0.564530676679,1.163972270519));-#2808 = VECTOR('',#2809,1.);-#2809 = DIRECTION('',(0.944797752613,0.327654096049));-#2810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2811 = ORIENTED_EDGE('',*,*,#2723,.F.);-#2812 = ADVANCED_FACE('',(#2813),#1179,.F.);-#2813 = FACE_BOUND('',#2814,.F.);-#2814 = EDGE_LOOP('',(#2815,#2816,#2839,#2862,#2890,#2913,#2940,#2960));-#2815 = ORIENTED_EDGE('',*,*,#1163,.T.);-#2816 = ORIENTED_EDGE('',*,*,#2817,.T.);-#2817 = EDGE_CURVE('',#1136,#2818,#2820,.T.);-#2818 = VERTEX_POINT('',#2819);-#2819 = CARTESIAN_POINT('',(0.775,0.7,0.9));-#2820 = SURFACE_CURVE('',#2821,(#2825,#2832),.PCURVE_S1.);-#2821 = LINE('',#2822,#2823);-#2822 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#2823 = VECTOR('',#2824,1.);-#2824 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2825 = PCURVE('',#1179,#2826);-#2826 = DEFINITIONAL_REPRESENTATION('',(#2827),#2831);-#2827 = LINE('',#2828,#2829);-#2828 = CARTESIAN_POINT('',(-2.775557561563E-17,-5.948107097195E-17));-#2829 = VECTOR('',#2830,1.);-#2830 = DIRECTION('',(1.,-1.412411194201E-16));-#2831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2832 = PCURVE('',#1151,#2833);-#2833 = DEFINITIONAL_REPRESENTATION('',(#2834),#2838);-#2834 = LINE('',#2835,#2836);-#2835 = CARTESIAN_POINT('',(7.5E-02,0.1425));-#2836 = VECTOR('',#2837,1.);-#2837 = DIRECTION('',(0.,-1.));-#2838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2839 = ORIENTED_EDGE('',*,*,#2840,.T.);-#2840 = EDGE_CURVE('',#2818,#2841,#2843,.T.);-#2841 = VERTEX_POINT('',#2842);-#2842 = CARTESIAN_POINT('',(0.775,-0.7,0.9));-#2843 = SURFACE_CURVE('',#2844,(#2848,#2855),.PCURVE_S1.);-#2844 = LINE('',#2845,#2846);-#2845 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#2846 = VECTOR('',#2847,1.);-#2847 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2848 = PCURVE('',#1179,#2849);-#2849 = DEFINITIONAL_REPRESENTATION('',(#2850),#2854);-#2850 = LINE('',#2851,#2852);-#2851 = CARTESIAN_POINT('',(1.110223024625E-16,-1.394249721719E-16));-#2852 = VECTOR('',#2853,1.);-#2853 = DIRECTION('',(1.,-1.681481405048E-17));-#2854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2855 = PCURVE('',#2068,#2856);-#2856 = DEFINITIONAL_REPRESENTATION('',(#2857),#2861);-#2857 = LINE('',#2858,#2859);-#2858 = CARTESIAN_POINT('',(0.775,9.5E-02));-#2859 = VECTOR('',#2860,1.);-#2860 = DIRECTION('',(-4.08998344385E-17,1.));-#2861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2862 = ORIENTED_EDGE('',*,*,#2863,.T.);-#2863 = EDGE_CURVE('',#2841,#2864,#2866,.T.);-#2864 = VERTEX_POINT('',#2865);-#2865 = CARTESIAN_POINT('',(0.775,-1.2,0.9));-#2866 = SURFACE_CURVE('',#2867,(#2871,#2878),.PCURVE_S1.);-#2867 = LINE('',#2868,#2869);-#2868 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#2869 = VECTOR('',#2870,1.);-#2870 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2871 = PCURVE('',#1179,#2872);-#2872 = DEFINITIONAL_REPRESENTATION('',(#2873),#2877);+#2753 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#2754 = CARTESIAN_POINT('',(0.725810707854,1.317905353927,0.95));+#2755 = PCURVE('',#1185,#2756);+#2756 = DEFINITIONAL_REPRESENTATION('',(#2757),#2761);+#2757 = LINE('',#2758,#2759);+#2758 = CARTESIAN_POINT('',(0.116672618896,3.293702012679E-16));+#2759 = VECTOR('',#2760,1.);+#2760 = DIRECTION('',(8.326672684689E-17,1.));+#2761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2762 = PCURVE('',#1157,#2763);+#2763 = DEFINITIONAL_REPRESENTATION('',(#2764),#2768);+#2764 = LINE('',#2765,#2766);+#2765 = CARTESIAN_POINT('',(1.099090803126E-16,2.017322039476E-16));+#2766 = VECTOR('',#2767,1.);+#2767 = DIRECTION('',(-7.317436216078E-17,1.));+#2768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2769 = ORIENTED_EDGE('',*,*,#2770,.F.);+#2770 = EDGE_CURVE('',#2702,#2749,#2771,.T.);+#2771 = SURFACE_CURVE('',#2772,(#2776,#2782),.PCURVE_S1.);+#2772 = LINE('',#2773,#2774);+#2773 = CARTESIAN_POINT('',(0.667905353927,1.375810707854,0.95));+#2774 = VECTOR('',#2775,1.);+#2775 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2776 = PCURVE('',#1185,#2777);+#2777 = DEFINITIONAL_REPRESENTATION('',(#2778),#2781);+#2778 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2779,#2780),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,8.189053685758E-02),.PIECEWISE_BEZIER_KNOTS.);+#2779 = CARTESIAN_POINT('',(-4.491614528285E-17,1.));+#2780 = CARTESIAN_POINT('',(0.116672618896,1.));+#2781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2782 = PCURVE('',#2613,#2783);+#2783 = DEFINITIONAL_REPRESENTATION('',(#2784),#2788);+#2784 = LINE('',#2785,#2786);+#2785 = CARTESIAN_POINT('',(0.583376766247,1.20169122316));+#2786 = VECTOR('',#2787,1.);+#2787 = DIRECTION('',(0.944919570391,0.327302620662));+#2788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2789 = ORIENTED_EDGE('',*,*,#2701,.F.);+#2790 = ADVANCED_FACE('',(#2791),#1157,.F.);+#2791 = FACE_BOUND('',#2792,.F.);+#2792 = EDGE_LOOP('',(#2793,#2794,#2817,#2840,#2868,#2891,#2918,#2938));+#2793 = ORIENTED_EDGE('',*,*,#1141,.T.);+#2794 = ORIENTED_EDGE('',*,*,#2795,.T.);+#2795 = EDGE_CURVE('',#1114,#2796,#2798,.T.);+#2796 = VERTEX_POINT('',#2797);+#2797 = CARTESIAN_POINT('',(0.775,0.775,0.6));+#2798 = SURFACE_CURVE('',#2799,(#2803,#2810),.PCURVE_S1.);+#2799 = LINE('',#2800,#2801);+#2800 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#2801 = VECTOR('',#2802,1.);+#2802 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2803 = PCURVE('',#1157,#2804);+#2804 = DEFINITIONAL_REPRESENTATION('',(#2805),#2809);+#2805 = LINE('',#2806,#2807);+#2806 = CARTESIAN_POINT('',(0.,-8.462982660719E-17));+#2807 = VECTOR('',#2808,1.);+#2808 = DIRECTION('',(1.,6.389676185599E-16));+#2809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2810 = PCURVE('',#1129,#2811);+#2811 = DEFINITIONAL_REPRESENTATION('',(#2812),#2816);+#2812 = LINE('',#2813,#2814);+#2813 = CARTESIAN_POINT('',(7.5E-02,0.2175));+#2814 = VECTOR('',#2815,1.);+#2815 = DIRECTION('',(0.,-1.));+#2816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2817 = ORIENTED_EDGE('',*,*,#2818,.T.);+#2818 = EDGE_CURVE('',#2796,#2819,#2821,.T.);+#2819 = VERTEX_POINT('',#2820);+#2820 = CARTESIAN_POINT('',(0.775,-0.775,0.6));+#2821 = SURFACE_CURVE('',#2822,(#2826,#2833),.PCURVE_S1.);+#2822 = LINE('',#2823,#2824);+#2823 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#2824 = VECTOR('',#2825,1.);+#2825 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2826 = PCURVE('',#1157,#2827);+#2827 = DEFINITIONAL_REPRESENTATION('',(#2828),#2832);+#2828 = LINE('',#2829,#2830);+#2829 = CARTESIAN_POINT('',(1.110223024625E-16,2.502746326599E-16));+#2830 = VECTOR('',#2831,1.);+#2831 = DIRECTION('',(1.,-2.820674361635E-17));+#2832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2833 = PCURVE('',#2046,#2834);+#2834 = DEFINITIONAL_REPRESENTATION('',(#2835),#2839);+#2835 = LINE('',#2836,#2837);+#2836 = CARTESIAN_POINT('',(0.775,9.5E-02));+#2837 = VECTOR('',#2838,1.);+#2838 = DIRECTION('',(-4.08998344385E-17,1.));+#2839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2840 = ORIENTED_EDGE('',*,*,#2841,.T.);+#2841 = EDGE_CURVE('',#2819,#2842,#2844,.T.);+#2842 = VERTEX_POINT('',#2843);+#2843 = CARTESIAN_POINT('',(0.775,-1.125,0.6));+#2844 = SURFACE_CURVE('',#2845,(#2849,#2856),.PCURVE_S1.);+#2845 = LINE('',#2846,#2847);+#2846 = CARTESIAN_POINT('',(0.775,1.3425,0.6));+#2847 = VECTOR('',#2848,1.);+#2848 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2849 = PCURVE('',#1157,#2850);+#2850 = DEFINITIONAL_REPRESENTATION('',(#2851),#2855);+#2851 = LINE('',#2852,#2853);+#2852 = CARTESIAN_POINT('',(0.,-4.258627128074E-16));+#2853 = VECTOR('',#2854,1.);+#2854 = DIRECTION('',(1.,2.498113734705E-16));+#2855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2856 = PCURVE('',#2857,#2862);+#2857 = PLANE('',#2858);+#2858 = AXIS2_PLACEMENT_3D('',#2859,#2860,#2861);+#2859 = CARTESIAN_POINT('',(0.85,-0.775,0.6));+#2860 = DIRECTION('',(0.,0.,-1.));+#2861 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#2862 = DEFINITIONAL_REPRESENTATION('',(#2863),#2867);+#2863 = LINE('',#2864,#2865);+#2864 = CARTESIAN_POINT('',(7.5E-02,2.1175));+#2865 = VECTOR('',#2866,1.);+#2866 = DIRECTION('',(0.,-1.));+#2867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2868 = ORIENTED_EDGE('',*,*,#2869,.T.);+#2869 = EDGE_CURVE('',#2842,#2870,#2872,.T.);+#2870 = VERTEX_POINT('',#2871);+#2871 = CARTESIAN_POINT('',(0.775,-1.3425,0.6));+#2872 = SURFACE_CURVE('',#2873,(#2877,#2884),.PCURVE_S1.); #2873 = LINE('',#2874,#2875);-#2874 = CARTESIAN_POINT('',(0.,7.505680478377E-16));+#2874 = CARTESIAN_POINT('',(0.775,1.3425,0.6)); #2875 = VECTOR('',#2876,1.);-#2876 = DIRECTION('',(1.,-3.820719577039E-16));-#2877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2878 = PCURVE('',#2879,#2884);-#2879 = PLANE('',#2880);-#2880 = AXIS2_PLACEMENT_3D('',#2881,#2882,#2883);-#2881 = CARTESIAN_POINT('',(0.85,-0.7,0.9));-#2882 = DIRECTION('',(0.,0.,-1.));-#2883 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));-#2884 = DEFINITIONAL_REPRESENTATION('',(#2885),#2889);-#2885 = LINE('',#2886,#2887);-#2886 = CARTESIAN_POINT('',(7.5E-02,2.0425));-#2887 = VECTOR('',#2888,1.);-#2888 = DIRECTION('',(0.,-1.));-#2889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2890 = ORIENTED_EDGE('',*,*,#2891,.T.);-#2891 = EDGE_CURVE('',#2864,#2892,#2894,.T.);-#2892 = VERTEX_POINT('',#2893);-#2893 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));-#2894 = SURFACE_CURVE('',#2895,(#2899,#2906),.PCURVE_S1.);-#2895 = LINE('',#2896,#2897);-#2896 = CARTESIAN_POINT('',(0.775,1.3425,0.9));-#2897 = VECTOR('',#2898,1.);-#2898 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2899 = PCURVE('',#1179,#2900);+#2876 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2877 = PCURVE('',#1157,#2878);+#2878 = DEFINITIONAL_REPRESENTATION('',(#2879),#2883);+#2879 = LINE('',#2880,#2881);+#2880 = CARTESIAN_POINT('',(0.,1.958490441718E-15));+#2881 = VECTOR('',#2882,1.);+#2882 = DIRECTION('',(1.,-7.519260680943E-16));+#2883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2884 = PCURVE('',#1420,#2885);+#2885 = DEFINITIONAL_REPRESENTATION('',(#2886),#2890);+#2886 = LINE('',#2887,#2888);+#2887 = CARTESIAN_POINT('',(0.775,9.5E-02));+#2888 = VECTOR('',#2889,1.);+#2889 = DIRECTION('',(-4.08998344385E-17,1.));+#2890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2891 = ORIENTED_EDGE('',*,*,#2892,.T.);+#2892 = EDGE_CURVE('',#2870,#2893,#2895,.T.);+#2893 = VERTEX_POINT('',#2894);+#2894 = CARTESIAN_POINT('',(0.725810707854,-1.317905353927,0.95));+#2895 = SURFACE_CURVE('',#2896,(#2899,#2906),.PCURVE_S1.);+#2896 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2897,#2898),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2897 = CARTESIAN_POINT('',(0.775,-1.3425,0.6));+#2898 = CARTESIAN_POINT('',(0.725810707854,-1.317905353927,0.95));+#2899 = PCURVE('',#1157,#2900); #2900 = DEFINITIONAL_REPRESENTATION('',(#2901),#2905); #2901 = LINE('',#2902,#2903);-#2902 = CARTESIAN_POINT('',(0.,4.522763122905E-16));+#2902 = CARTESIAN_POINT('',(2.685,2.506315049053E-16)); #2903 = VECTOR('',#2904,1.);-#2904 = DIRECTION('',(1.,-2.173887241661E-16));+#2904 = DIRECTION('',(0.,1.)); #2905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#2906 = PCURVE('',#1442,#2907);-#2907 = DEFINITIONAL_REPRESENTATION('',(#2908),#2912);-#2908 = LINE('',#2909,#2910);-#2909 = CARTESIAN_POINT('',(0.775,9.5E-02));-#2910 = VECTOR('',#2911,1.);-#2911 = DIRECTION('',(-4.08998344385E-17,1.));-#2912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2913 = ORIENTED_EDGE('',*,*,#2914,.T.);-#2914 = EDGE_CURVE('',#2892,#2915,#2917,.T.);-#2915 = VERTEX_POINT('',#2916);-#2916 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));-#2917 = SURFACE_CURVE('',#2918,(#2921,#2928),.PCURVE_S1.);-#2918 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2919,#2920),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#2919 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));-#2920 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));-#2921 = PCURVE('',#1179,#2922);-#2922 = DEFINITIONAL_REPRESENTATION('',(#2923),#2927);-#2923 = LINE('',#2924,#2925);-#2924 = CARTESIAN_POINT('',(2.685,-1.078724937203E-16));-#2925 = VECTOR('',#2926,1.);-#2926 = DIRECTION('',(0.,1.));-#2927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2928 = PCURVE('',#2929,#2934);-#2929 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#2930,#2931)- ,(#2932,#2933+#2906 = PCURVE('',#2907,#2912);+#2907 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2908,#2909)+ ,(#2910,#2911 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) ,.PIECEWISE_BEZIER_KNOTS.);-#2930 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));-#2931 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));-#2932 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));-#2933 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));-#2934 = DEFINITIONAL_REPRESENTATION('',(#2935),#2939);-#2935 = LINE('',#2936,#2937);-#2936 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));-#2937 = VECTOR('',#2938,1.);-#2938 = DIRECTION('',(8.45698415413E-18,1.));-#2939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2940 = ORIENTED_EDGE('',*,*,#2941,.F.);-#2941 = EDGE_CURVE('',#2771,#2915,#2942,.T.);-#2942 = SURFACE_CURVE('',#2943,(#2947,#2953),.PCURVE_S1.);-#2943 = LINE('',#2944,#2945);-#2944 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));-#2945 = VECTOR('',#2946,1.);-#2946 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2947 = PCURVE('',#1179,#2948);-#2948 = DEFINITIONAL_REPRESENTATION('',(#2949),#2952);-#2949 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2950,#2951),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);-#2950 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));-#2951 = CARTESIAN_POINT('',(2.685,1.));-#2952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2953 = PCURVE('',#2635,#2954);-#2954 = DEFINITIONAL_REPRESENTATION('',(#2955),#2959);-#2955 = LINE('',#2956,#2957);-#2956 = CARTESIAN_POINT('',(0.613733215055,1.181035618934));-#2957 = VECTOR('',#2958,1.);-#2958 = DIRECTION('',(0.899759330922,-0.436386464522));-#2959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2960 = ORIENTED_EDGE('',*,*,#2770,.F.);-#2961 = ADVANCED_FACE('',(#2962),#1151,.F.);-#2962 = FACE_BOUND('',#2963,.F.);-#2963 = EDGE_LOOP('',(#2964,#2987,#3015,#3036,#3057,#3058));-#2964 = ORIENTED_EDGE('',*,*,#2965,.F.);-#2965 = EDGE_CURVE('',#2966,#1113,#2968,.T.);-#2966 = VERTEX_POINT('',#2967);-#2967 = CARTESIAN_POINT('',(0.85,1.2,0.9));-#2968 = SURFACE_CURVE('',#2969,(#2973,#2980),.PCURVE_S1.);-#2969 = LINE('',#2970,#2971);-#2970 = CARTESIAN_POINT('',(0.85,1.2,0.9));-#2971 = VECTOR('',#2972,1.);-#2972 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#2973 = PCURVE('',#1151,#2974);-#2974 = DEFINITIONAL_REPRESENTATION('',(#2975),#2979);-#2975 = LINE('',#2976,#2977);-#2976 = CARTESIAN_POINT('',(-0.,0.));-#2977 = VECTOR('',#2978,1.);-#2978 = DIRECTION('',(1.,0.));-#2979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2980 = PCURVE('',#1905,#2981);-#2981 = DEFINITIONAL_REPRESENTATION('',(#2982),#2986);-#2982 = LINE('',#2983,#2984);-#2983 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#2984 = VECTOR('',#2985,1.);-#2985 = DIRECTION('',(0.,1.));-#2986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#2987 = ORIENTED_EDGE('',*,*,#2988,.T.);-#2988 = EDGE_CURVE('',#2966,#2989,#2991,.T.);-#2989 = VERTEX_POINT('',#2990);-#2990 = CARTESIAN_POINT('',(0.85,0.7,0.9));-#2991 = SURFACE_CURVE('',#2992,(#2996,#3003),.PCURVE_S1.);-#2992 = LINE('',#2993,#2994);-#2993 = CARTESIAN_POINT('',(0.85,1.2,0.9));-#2994 = VECTOR('',#2995,1.);-#2995 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#2996 = PCURVE('',#1151,#2997);-#2997 = DEFINITIONAL_REPRESENTATION('',(#2998),#3002);-#2998 = LINE('',#2999,#3000);-#2999 = CARTESIAN_POINT('',(-0.,0.));-#3000 = VECTOR('',#3001,1.);-#3001 = DIRECTION('',(0.,-1.));-#3002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3003 = PCURVE('',#3004,#3009);-#3004 = CYLINDRICAL_SURFACE('',#3005,0.25);-#3005 = AXIS2_PLACEMENT_3D('',#3006,#3007,#3008);-#3006 = CARTESIAN_POINT('',(0.85,1.2,0.65));-#3007 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#3008 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#3009 = DEFINITIONAL_REPRESENTATION('',(#3010),#3014);-#3010 = LINE('',#3011,#3012);-#3011 = CARTESIAN_POINT('',(4.886921905584,0.));-#3012 = VECTOR('',#3013,1.);-#3013 = DIRECTION('',(0.,-1.));-#3014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3015 = ORIENTED_EDGE('',*,*,#3016,.T.);-#3016 = EDGE_CURVE('',#2989,#2003,#3017,.T.);-#3017 = SURFACE_CURVE('',#3018,(#3022,#3029),.PCURVE_S1.);-#3018 = LINE('',#3019,#3020);-#3019 = CARTESIAN_POINT('',(0.85,0.7,0.9));-#3020 = VECTOR('',#3021,1.);-#3021 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#3022 = PCURVE('',#1151,#3023);-#3023 = DEFINITIONAL_REPRESENTATION('',(#3024),#3028);-#3024 = LINE('',#3025,#3026);-#3025 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#3026 = VECTOR('',#3027,1.);-#3027 = DIRECTION('',(1.,0.));-#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3029 = PCURVE('',#1961,#3030);-#3030 = DEFINITIONAL_REPRESENTATION('',(#3031),#3035);-#3031 = LINE('',#3032,#3033);-#3032 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#3033 = VECTOR('',#3034,1.);-#3034 = DIRECTION('',(0.,1.));-#3035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3036 = ORIENTED_EDGE('',*,*,#3037,.T.);-#3037 = EDGE_CURVE('',#2003,#2818,#3038,.T.);-#3038 = SURFACE_CURVE('',#3039,(#3043,#3050),.PCURVE_S1.);-#3039 = LINE('',#3040,#3041);-#3040 = CARTESIAN_POINT('',(0.85,0.7,0.9));-#3041 = VECTOR('',#3042,1.);-#3042 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#3043 = PCURVE('',#1151,#3044);-#3044 = DEFINITIONAL_REPRESENTATION('',(#3045),#3049);-#3045 = LINE('',#3046,#3047);-#3046 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#3047 = VECTOR('',#3048,1.);-#3048 = DIRECTION('',(1.,0.));-#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3050 = PCURVE('',#2068,#3051);-#3051 = DEFINITIONAL_REPRESENTATION('',(#3052),#3056);-#3052 = LINE('',#3053,#3054);-#3053 = CARTESIAN_POINT('',(0.85,0.7375));-#3054 = VECTOR('',#3055,1.);-#3055 = DIRECTION('',(-1.,-4.08998344385E-17));-#3056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3057 = ORIENTED_EDGE('',*,*,#2817,.F.);-#3058 = ORIENTED_EDGE('',*,*,#1135,.F.);-#3059 = ADVANCED_FACE('',(#3060),#1442,.F.);-#3060 = FACE_BOUND('',#3061,.F.);-#3061 = EDGE_LOOP('',(#3062,#3083,#3084,#3085,#3086,#3087,#3088,#3109,- #3110,#3133,#3161,#3182));-#3062 = ORIENTED_EDGE('',*,*,#3063,.F.);-#3063 = EDGE_CURVE('',#2165,#2864,#3064,.T.);-#3064 = SURFACE_CURVE('',#3065,(#3069,#3076),.PCURVE_S1.);-#3065 = LINE('',#3066,#3067);-#3066 = CARTESIAN_POINT('',(0.85,-1.2,0.9));-#3067 = VECTOR('',#3068,1.);-#3068 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#3069 = PCURVE('',#1442,#3070);-#3070 = DEFINITIONAL_REPRESENTATION('',(#3071),#3075);-#3071 = LINE('',#3072,#3073);-#3072 = CARTESIAN_POINT('',(0.85,2.6375));-#3073 = VECTOR('',#3074,1.);-#3074 = DIRECTION('',(-1.,-4.08998344385E-17));-#3075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3076 = PCURVE('',#2879,#3077);-#3077 = DEFINITIONAL_REPRESENTATION('',(#3078),#3082);-#3078 = LINE('',#3079,#3080);-#3079 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#3080 = VECTOR('',#3081,1.);-#3081 = DIRECTION('',(1.,0.));-#3082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3083 = ORIENTED_EDGE('',*,*,#2208,.T.);-#3084 = ORIENTED_EDGE('',*,*,#2299,.T.);-#3085 = ORIENTED_EDGE('',*,*,#2326,.T.);-#3086 = ORIENTED_EDGE('',*,*,#2234,.T.);-#3087 = ORIENTED_EDGE('',*,*,#1428,.T.);-#3088 = ORIENTED_EDGE('',*,*,#3089,.T.);-#3089 = EDGE_CURVE('',#1401,#2474,#3090,.T.);-#3090 = SURFACE_CURVE('',#3091,(#3095,#3102),.PCURVE_S1.);-#3091 = LINE('',#3092,#3093);-#3092 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));-#3093 = VECTOR('',#3094,1.);-#3094 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3095 = PCURVE('',#1442,#3096);-#3096 = DEFINITIONAL_REPRESENTATION('',(#3097),#3101);-#3097 = LINE('',#3098,#3099);-#3098 = CARTESIAN_POINT('',(-0.85,2.6375));-#3099 = VECTOR('',#3100,1.);-#3100 = DIRECTION('',(1.,1.633645143532E-16));-#3101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3102 = PCURVE('',#2512,#3103);-#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3108);-#3104 = LINE('',#3105,#3106);-#3105 = CARTESIAN_POINT('',(0.,-0.));-#3106 = VECTOR('',#3107,1.);-#3107 = DIRECTION('',(1.,0.));-#3108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3109 = ORIENTED_EDGE('',*,*,#2471,.F.);-#3110 = ORIENTED_EDGE('',*,*,#3111,.F.);-#3111 = EDGE_CURVE('',#3112,#2472,#3114,.T.);-#3112 = VERTEX_POINT('',#3113);-#3113 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));-#3114 = SURFACE_CURVE('',#3115,(#3119,#3126),.PCURVE_S1.);-#3115 = LINE('',#3116,#3117);-#3116 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));-#3117 = VECTOR('',#3118,1.);-#3118 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#3119 = PCURVE('',#1442,#3120);-#3120 = DEFINITIONAL_REPRESENTATION('',(#3121),#3125);-#3121 = LINE('',#3122,#3123);-#3122 = CARTESIAN_POINT('',(-0.6925,2.8625));-#3123 = VECTOR('',#3124,1.);-#3124 = DIRECTION('',(-0.707106781187,-0.707106781187));-#3125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3126 = PCURVE('',#2660,#3127);-#3127 = DEFINITIONAL_REPRESENTATION('',(#3128),#3132);-#3128 = LINE('',#3129,#3130);-#3129 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));-#3130 = VECTOR('',#3131,1.);-#3131 = DIRECTION('',(1.,1.674888819215E-19));-#3132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3133 = ORIENTED_EDGE('',*,*,#3134,.F.);-#3134 = EDGE_CURVE('',#3135,#3112,#3137,.T.);-#3135 = VERTEX_POINT('',#3136);-#3136 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));-#3137 = SURFACE_CURVE('',#3138,(#3142,#3149),.PCURVE_S1.);-#3138 = LINE('',#3139,#3140);-#3139 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));-#3140 = VECTOR('',#3141,1.);-#3141 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#3142 = PCURVE('',#1442,#3143);-#3143 = DEFINITIONAL_REPRESENTATION('',(#3144),#3148);-#3144 = LINE('',#3145,#3146);-#3145 = CARTESIAN_POINT('',(0.6925,2.8625));-#3146 = VECTOR('',#3147,1.);-#3147 = DIRECTION('',(-1.,-4.08998344385E-17));-#3148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3149 = PCURVE('',#3150,#3155);-#3150 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(- (#3151,#3152)- ,(#3153,#3154+#2908 = CARTESIAN_POINT('',(0.775,-1.3425,0.6));+#2909 = CARTESIAN_POINT('',(0.725810707854,-1.317905353927,0.95));+#2910 = CARTESIAN_POINT('',(0.6925,-1.425,0.6));+#2911 = CARTESIAN_POINT('',(0.667905353927,-1.375810707854,0.95));+#2912 = DEFINITIONAL_REPRESENTATION('',(#2913),#2917);+#2913 = LINE('',#2914,#2915);+#2914 = CARTESIAN_POINT('',(-7.188991775997E-17,1.905895346403E-17));+#2915 = VECTOR('',#2916,1.);+#2916 = DIRECTION('',(1.379904077185E-16,1.));+#2917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2918 = ORIENTED_EDGE('',*,*,#2919,.F.);+#2919 = EDGE_CURVE('',#2749,#2893,#2920,.T.);+#2920 = SURFACE_CURVE('',#2921,(#2925,#2931),.PCURVE_S1.);+#2921 = LINE('',#2922,#2923);+#2922 = CARTESIAN_POINT('',(0.725810707854,1.317905353927,0.95));+#2923 = VECTOR('',#2924,1.);+#2924 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2925 = PCURVE('',#1157,#2926);+#2926 = DEFINITIONAL_REPRESENTATION('',(#2927),#2930);+#2927 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2928,#2929),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.635810707854),.PIECEWISE_BEZIER_KNOTS.);+#2928 = CARTESIAN_POINT('',(3.673471815182E-17,1.));+#2929 = CARTESIAN_POINT('',(2.685,1.));+#2930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2931 = PCURVE('',#2613,#2932);+#2932 = DEFINITIONAL_REPRESENTATION('',(#2933),#2937);+#2933 = LINE('',#2934,#2935);+#2934 = CARTESIAN_POINT('',(0.660756737153,1.228494210481));+#2935 = VECTOR('',#2936,1.);+#2936 = DIRECTION('',(0.89959693847,-0.436721133329));+#2937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2938 = ORIENTED_EDGE('',*,*,#2748,.F.);+#2939 = ADVANCED_FACE('',(#2940),#1129,.F.);+#2940 = FACE_BOUND('',#2941,.F.);+#2941 = EDGE_LOOP('',(#2942,#2965,#2993,#3014,#3035,#3036));+#2942 = ORIENTED_EDGE('',*,*,#2943,.F.);+#2943 = EDGE_CURVE('',#2944,#1091,#2946,.T.);+#2944 = VERTEX_POINT('',#2945);+#2945 = CARTESIAN_POINT('',(0.85,1.125,0.6));+#2946 = SURFACE_CURVE('',#2947,(#2951,#2958),.PCURVE_S1.);+#2947 = LINE('',#2948,#2949);+#2948 = CARTESIAN_POINT('',(0.85,1.125,0.6));+#2949 = VECTOR('',#2950,1.);+#2950 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2951 = PCURVE('',#1129,#2952);+#2952 = DEFINITIONAL_REPRESENTATION('',(#2953),#2957);+#2953 = LINE('',#2954,#2955);+#2954 = CARTESIAN_POINT('',(-0.,0.));+#2955 = VECTOR('',#2956,1.);+#2956 = DIRECTION('',(1.,0.));+#2957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2958 = PCURVE('',#1883,#2959);+#2959 = DEFINITIONAL_REPRESENTATION('',(#2960),#2964);+#2960 = LINE('',#2961,#2962);+#2961 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#2962 = VECTOR('',#2963,1.);+#2963 = DIRECTION('',(0.,1.));+#2964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2965 = ORIENTED_EDGE('',*,*,#2966,.T.);+#2966 = EDGE_CURVE('',#2944,#2967,#2969,.T.);+#2967 = VERTEX_POINT('',#2968);+#2968 = CARTESIAN_POINT('',(0.85,0.775,0.6));+#2969 = SURFACE_CURVE('',#2970,(#2974,#2981),.PCURVE_S1.);+#2970 = LINE('',#2971,#2972);+#2971 = CARTESIAN_POINT('',(0.85,1.125,0.6));+#2972 = VECTOR('',#2973,1.);+#2973 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2974 = PCURVE('',#1129,#2975);+#2975 = DEFINITIONAL_REPRESENTATION('',(#2976),#2980);+#2976 = LINE('',#2977,#2978);+#2977 = CARTESIAN_POINT('',(-0.,0.));+#2978 = VECTOR('',#2979,1.);+#2979 = DIRECTION('',(0.,-1.));+#2980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2981 = PCURVE('',#2982,#2987);+#2982 = CYLINDRICAL_SURFACE('',#2983,0.25);+#2983 = AXIS2_PLACEMENT_3D('',#2984,#2985,#2986);+#2984 = CARTESIAN_POINT('',(0.85,1.125,0.35));+#2985 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2986 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#2987 = DEFINITIONAL_REPRESENTATION('',(#2988),#2992);+#2988 = LINE('',#2989,#2990);+#2989 = CARTESIAN_POINT('',(4.886921905584,0.));+#2990 = VECTOR('',#2991,1.);+#2991 = DIRECTION('',(0.,-1.));+#2992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2993 = ORIENTED_EDGE('',*,*,#2994,.T.);+#2994 = EDGE_CURVE('',#2967,#1981,#2995,.T.);+#2995 = SURFACE_CURVE('',#2996,(#3000,#3007),.PCURVE_S1.);+#2996 = LINE('',#2997,#2998);+#2997 = CARTESIAN_POINT('',(0.85,0.775,0.6));+#2998 = VECTOR('',#2999,1.);+#2999 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3000 = PCURVE('',#1129,#3001);+#3001 = DEFINITIONAL_REPRESENTATION('',(#3002),#3006);+#3002 = LINE('',#3003,#3004);+#3003 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#3004 = VECTOR('',#3005,1.);+#3005 = DIRECTION('',(1.,0.));+#3006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3007 = PCURVE('',#1939,#3008);+#3008 = DEFINITIONAL_REPRESENTATION('',(#3009),#3013);+#3009 = LINE('',#3010,#3011);+#3010 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#3011 = VECTOR('',#3012,1.);+#3012 = DIRECTION('',(0.,1.));+#3013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3014 = ORIENTED_EDGE('',*,*,#3015,.T.);+#3015 = EDGE_CURVE('',#1981,#2796,#3016,.T.);+#3016 = SURFACE_CURVE('',#3017,(#3021,#3028),.PCURVE_S1.);+#3017 = LINE('',#3018,#3019);+#3018 = CARTESIAN_POINT('',(0.85,0.775,0.6));+#3019 = VECTOR('',#3020,1.);+#3020 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3021 = PCURVE('',#1129,#3022);+#3022 = DEFINITIONAL_REPRESENTATION('',(#3023),#3027);+#3023 = LINE('',#3024,#3025);+#3024 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#3025 = VECTOR('',#3026,1.);+#3026 = DIRECTION('',(1.,0.));+#3027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3028 = PCURVE('',#2046,#3029);+#3029 = DEFINITIONAL_REPRESENTATION('',(#3030),#3034);+#3030 = LINE('',#3031,#3032);+#3031 = CARTESIAN_POINT('',(0.85,0.6625));+#3032 = VECTOR('',#3033,1.);+#3033 = DIRECTION('',(-1.,-4.08998344385E-17));+#3034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3035 = ORIENTED_EDGE('',*,*,#2795,.F.);+#3036 = ORIENTED_EDGE('',*,*,#1113,.F.);+#3037 = ADVANCED_FACE('',(#3038),#1420,.F.);+#3038 = FACE_BOUND('',#3039,.F.);+#3039 = EDGE_LOOP('',(#3040,#3061,#3062,#3063,#3064,#3065,#3066,#3087,+ #3088,#3111,#3139,#3160));+#3040 = ORIENTED_EDGE('',*,*,#3041,.F.);+#3041 = EDGE_CURVE('',#2143,#2842,#3042,.T.);+#3042 = SURFACE_CURVE('',#3043,(#3047,#3054),.PCURVE_S1.);+#3043 = LINE('',#3044,#3045);+#3044 = CARTESIAN_POINT('',(0.85,-1.125,0.6));+#3045 = VECTOR('',#3046,1.);+#3046 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3047 = PCURVE('',#1420,#3048);+#3048 = DEFINITIONAL_REPRESENTATION('',(#3049),#3053);+#3049 = LINE('',#3050,#3051);+#3050 = CARTESIAN_POINT('',(0.85,2.5625));+#3051 = VECTOR('',#3052,1.);+#3052 = DIRECTION('',(-1.,-4.08998344385E-17));+#3053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3054 = PCURVE('',#2857,#3055);+#3055 = DEFINITIONAL_REPRESENTATION('',(#3056),#3060);+#3056 = LINE('',#3057,#3058);+#3057 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#3058 = VECTOR('',#3059,1.);+#3059 = DIRECTION('',(1.,0.));+#3060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3061 = ORIENTED_EDGE('',*,*,#2186,.T.);+#3062 = ORIENTED_EDGE('',*,*,#2277,.T.);+#3063 = ORIENTED_EDGE('',*,*,#2304,.T.);+#3064 = ORIENTED_EDGE('',*,*,#2212,.T.);+#3065 = ORIENTED_EDGE('',*,*,#1406,.T.);+#3066 = ORIENTED_EDGE('',*,*,#3067,.T.);+#3067 = EDGE_CURVE('',#1379,#2452,#3068,.T.);+#3068 = SURFACE_CURVE('',#3069,(#3073,#3080),.PCURVE_S1.);+#3069 = LINE('',#3070,#3071);+#3070 = CARTESIAN_POINT('',(-0.85,-1.125,0.6));+#3071 = VECTOR('',#3072,1.);+#3072 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3073 = PCURVE('',#1420,#3074);+#3074 = DEFINITIONAL_REPRESENTATION('',(#3075),#3079);+#3075 = LINE('',#3076,#3077);+#3076 = CARTESIAN_POINT('',(-0.85,2.5625));+#3077 = VECTOR('',#3078,1.);+#3078 = DIRECTION('',(1.,1.633645143532E-16));+#3079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3080 = PCURVE('',#2490,#3081);+#3081 = DEFINITIONAL_REPRESENTATION('',(#3082),#3086);+#3082 = LINE('',#3083,#3084);+#3083 = CARTESIAN_POINT('',(0.,-0.));+#3084 = VECTOR('',#3085,1.);+#3085 = DIRECTION('',(1.,0.));+#3086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3087 = ORIENTED_EDGE('',*,*,#2449,.F.);+#3088 = ORIENTED_EDGE('',*,*,#3089,.F.);+#3089 = EDGE_CURVE('',#3090,#2450,#3092,.T.);+#3090 = VERTEX_POINT('',#3091);+#3091 = CARTESIAN_POINT('',(-0.6925,-1.425,0.6));+#3092 = SURFACE_CURVE('',#3093,(#3097,#3104),.PCURVE_S1.);+#3093 = LINE('',#3094,#3095);+#3094 = CARTESIAN_POINT('',(-0.6925,-1.425,0.6));+#3095 = VECTOR('',#3096,1.);+#3096 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#3097 = PCURVE('',#1420,#3098);+#3098 = DEFINITIONAL_REPRESENTATION('',(#3099),#3103);+#3099 = LINE('',#3100,#3101);+#3100 = CARTESIAN_POINT('',(-0.6925,2.8625));+#3101 = VECTOR('',#3102,1.);+#3102 = DIRECTION('',(-0.707106781187,-0.707106781187));+#3103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3104 = PCURVE('',#2638,#3105);+#3105 = DEFINITIONAL_REPRESENTATION('',(#3106),#3110);+#3106 = LINE('',#3107,#3108);+#3107 = CARTESIAN_POINT('',(7.190486470684E-18,-1.362249252212E-17));+#3108 = VECTOR('',#3109,1.);+#3109 = DIRECTION('',(1.,2.801123887969E-16));+#3110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3111 = ORIENTED_EDGE('',*,*,#3112,.F.);+#3112 = EDGE_CURVE('',#3113,#3090,#3115,.T.);+#3113 = VERTEX_POINT('',#3114);+#3114 = CARTESIAN_POINT('',(0.6925,-1.425,0.6));+#3115 = SURFACE_CURVE('',#3116,(#3120,#3127),.PCURVE_S1.);+#3116 = LINE('',#3117,#3118);+#3117 = CARTESIAN_POINT('',(0.6925,-1.425,0.6));+#3118 = VECTOR('',#3119,1.);+#3119 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3120 = PCURVE('',#1420,#3121);+#3121 = DEFINITIONAL_REPRESENTATION('',(#3122),#3126);+#3122 = LINE('',#3123,#3124);+#3123 = CARTESIAN_POINT('',(0.6925,2.8625));+#3124 = VECTOR('',#3125,1.);+#3125 = DIRECTION('',(-1.,-4.08998344385E-17));+#3126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3127 = PCURVE('',#3128,#3133);+#3128 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#3129,#3130)+ ,(#3131,#3132 )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), .PIECEWISE_BEZIER_KNOTS.);-#3151 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));-#3152 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));-#3153 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));-#3154 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));-#3155 = DEFINITIONAL_REPRESENTATION('',(#3156),#3160);-#3156 = LINE('',#3157,#3158);-#3157 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));-#3158 = VECTOR('',#3159,1.);-#3159 = DIRECTION('',(1.,-6.800608070842E-17));-#3160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3161 = ORIENTED_EDGE('',*,*,#3162,.F.);-#3162 = EDGE_CURVE('',#2892,#3135,#3163,.T.);-#3163 = SURFACE_CURVE('',#3164,(#3168,#3175),.PCURVE_S1.);-#3164 = LINE('',#3165,#3166);-#3165 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));-#3166 = VECTOR('',#3167,1.);-#3167 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#3168 = PCURVE('',#1442,#3169);-#3169 = DEFINITIONAL_REPRESENTATION('',(#3170),#3174);-#3170 = LINE('',#3171,#3172);-#3171 = CARTESIAN_POINT('',(0.775,2.78));-#3172 = VECTOR('',#3173,1.);-#3173 = DIRECTION('',(-0.707106781187,0.707106781187));-#3174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3175 = PCURVE('',#2929,#3176);-#3176 = DEFINITIONAL_REPRESENTATION('',(#3177),#3181);-#3177 = LINE('',#3178,#3179);-#3178 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));-#3179 = VECTOR('',#3180,1.);-#3180 = DIRECTION('',(1.,-1.674891034764E-19));-#3181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3182 = ORIENTED_EDGE('',*,*,#2891,.F.);-#3183 = ADVANCED_FACE('',(#3184),#1416,.F.);-#3184 = FACE_BOUND('',#3185,.F.);-#3185 = EDGE_LOOP('',(#3186,#3187,#3188,#3216,#3244,#3273,#3301,#3329,- #3357,#3390,#3418,#3447));-#3186 = ORIENTED_EDGE('',*,*,#1400,.F.);-#3187 = ORIENTED_EDGE('',*,*,#1457,.T.);-#3188 = ORIENTED_EDGE('',*,*,#3189,.T.);-#3189 = EDGE_CURVE('',#1458,#3190,#3192,.T.);-#3190 = VERTEX_POINT('',#3191);-#3191 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));-#3192 = SURFACE_CURVE('',#3193,(#3198,#3209),.PCURVE_S1.);-#3193 = CIRCLE('',#3194,0.1);-#3194 = AXIS2_PLACEMENT_3D('',#3195,#3196,#3197);-#3195 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));-#3196 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3197 = DIRECTION('',(0.,0.,1.));-#3198 = PCURVE('',#1416,#3199);-#3199 = DEFINITIONAL_REPRESENTATION('',(#3200),#3208);-#3200 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3201,#3202,#3203,#3204,-#3205,#3206,#3207),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3129 = CARTESIAN_POINT('',(0.6925,-1.425,0.6));+#3130 = CARTESIAN_POINT('',(0.667905353927,-1.375810707854,0.95));+#3131 = CARTESIAN_POINT('',(-0.6925,-1.425,0.6));+#3132 = CARTESIAN_POINT('',(-0.667905353927,-1.375810707854,0.95));+#3133 = DEFINITIONAL_REPRESENTATION('',(#3134),#3138);+#3134 = LINE('',#3135,#3136);+#3135 = CARTESIAN_POINT('',(1.731707792598E-16,1.593979877619E-16));+#3136 = VECTOR('',#3137,1.);+#3137 = DIRECTION('',(1.,-1.263123829481E-16));+#3138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3139 = ORIENTED_EDGE('',*,*,#3140,.F.);+#3140 = EDGE_CURVE('',#2870,#3113,#3141,.T.);+#3141 = SURFACE_CURVE('',#3142,(#3146,#3153),.PCURVE_S1.);+#3142 = LINE('',#3143,#3144);+#3143 = CARTESIAN_POINT('',(0.775,-1.3425,0.6));+#3144 = VECTOR('',#3145,1.);+#3145 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#3146 = PCURVE('',#1420,#3147);+#3147 = DEFINITIONAL_REPRESENTATION('',(#3148),#3152);+#3148 = LINE('',#3149,#3150);+#3149 = CARTESIAN_POINT('',(0.775,2.78));+#3150 = VECTOR('',#3151,1.);+#3151 = DIRECTION('',(-0.707106781187,0.707106781187));+#3152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3153 = PCURVE('',#2907,#3154);+#3154 = DEFINITIONAL_REPRESENTATION('',(#3155),#3159);+#3155 = LINE('',#3156,#3157);+#3156 = CARTESIAN_POINT('',(-7.188991775997E-17,1.905895346403E-17));+#3157 = VECTOR('',#3158,1.);+#3158 = DIRECTION('',(1.,-2.8011238924E-16));+#3159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3160 = ORIENTED_EDGE('',*,*,#2869,.F.);+#3161 = ADVANCED_FACE('',(#3162),#1394,.F.);+#3162 = FACE_BOUND('',#3163,.F.);+#3163 = EDGE_LOOP('',(#3164,#3165,#3166,#3194,#3222,#3251,#3279,#3307,+ #3335,#3368,#3396,#3425));+#3164 = ORIENTED_EDGE('',*,*,#1378,.F.);+#3165 = ORIENTED_EDGE('',*,*,#1435,.T.);+#3166 = ORIENTED_EDGE('',*,*,#3167,.T.);+#3167 = EDGE_CURVE('',#1436,#3168,#3170,.T.);+#3168 = VERTEX_POINT('',#3169);+#3169 = CARTESIAN_POINT('',(-0.948480775301,-1.125,0.367364817767));+#3170 = SURFACE_CURVE('',#3171,(#3176,#3187),.PCURVE_S1.);+#3171 = CIRCLE('',#3172,0.1);+#3172 = AXIS2_PLACEMENT_3D('',#3173,#3174,#3175);+#3173 = CARTESIAN_POINT('',(-0.85,-1.125,0.35));+#3174 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3175 = DIRECTION('',(0.,0.,1.));+#3176 = PCURVE('',#1394,#3177);+#3177 = DEFINITIONAL_REPRESENTATION('',(#3178),#3186);+#3178 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3179,#3180,#3181,#3182,+#3183,#3184,#3185),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3201 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3202 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#3203 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#3204 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#3205 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#3206 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#3207 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3209 = PCURVE('',#1523,#3210);-#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3215);-#3211 = LINE('',#3212,#3213);-#3212 = CARTESIAN_POINT('',(0.,0.));-#3213 = VECTOR('',#3214,1.);-#3214 = DIRECTION('',(1.,0.));-#3215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3216 = ORIENTED_EDGE('',*,*,#3217,.T.);-#3217 = EDGE_CURVE('',#3190,#3218,#3220,.T.);-#3218 = VERTEX_POINT('',#3219);-#3219 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583));-#3220 = SURFACE_CURVE('',#3221,(#3225,#3232),.PCURVE_S1.);-#3221 = LINE('',#3222,#3223);-#3222 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));-#3223 = VECTOR('',#3224,1.);-#3224 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#3225 = PCURVE('',#1416,#3226);-#3226 = DEFINITIONAL_REPRESENTATION('',(#3227),#3231);-#3227 = LINE('',#3228,#3229);-#3228 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#3229 = VECTOR('',#3230,1.);-#3230 = DIRECTION('',(-0.986721169868,-0.162423314012));-#3231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3232 = PCURVE('',#3233,#3238);-#3233 = PLANE('',#3234);-#3234 = AXIS2_PLACEMENT_3D('',#3235,#3236,#3237);-#3235 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));-#3236 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)- );-#3237 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#3238 = DEFINITIONAL_REPRESENTATION('',(#3239),#3243);-#3239 = LINE('',#3240,#3241);-#3240 = CARTESIAN_POINT('',(0.,0.));-#3241 = VECTOR('',#3242,1.);-#3242 = DIRECTION('',(1.,-1.463835121412E-34));-#3243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3244 = ORIENTED_EDGE('',*,*,#3245,.T.);-#3245 = EDGE_CURVE('',#3218,#3246,#3248,.T.);-#3246 = VERTEX_POINT('',#3247);-#3247 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));-#3248 = SURFACE_CURVE('',#3249,(#3254,#3261),.PCURVE_S1.);-#3249 = CIRCLE('',#3250,0.25);-#3250 = AXIS2_PLACEMENT_3D('',#3251,#3252,#3253);-#3251 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));-#3252 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#3253 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#3254 = PCURVE('',#1416,#3255);-#3255 = DEFINITIONAL_REPRESENTATION('',(#3256),#3260);-#3256 = CIRCLE('',#3257,0.25);-#3257 = AXIS2_PLACEMENT_2D('',#3258,#3259);-#3258 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#3259 = DIRECTION('',(-0.173648177667,0.984807753012));-#3260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3261 = PCURVE('',#3262,#3267);-#3262 = CYLINDRICAL_SURFACE('',#3263,0.25);-#3263 = AXIS2_PLACEMENT_3D('',#3264,#3265,#3266);-#3264 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));-#3265 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3266 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#3267 = DEFINITIONAL_REPRESENTATION('',(#3268),#3272);-#3268 = LINE('',#3269,#3270);-#3269 = CARTESIAN_POINT('',(6.28318530718,0.));-#3270 = VECTOR('',#3271,1.);-#3271 = DIRECTION('',(-1.,0.));-#3272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3273 = ORIENTED_EDGE('',*,*,#3274,.T.);-#3274 = EDGE_CURVE('',#3246,#3275,#3277,.T.);-#3275 = VERTEX_POINT('',#3276);-#3276 = CARTESIAN_POINT('',(-1.4,-1.2,0.));-#3277 = SURFACE_CURVE('',#3278,(#3282,#3289),.PCURVE_S1.);-#3278 = LINE('',#3279,#3280);-#3279 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));-#3280 = VECTOR('',#3281,1.);-#3281 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#3282 = PCURVE('',#1416,#3283);-#3283 = DEFINITIONAL_REPRESENTATION('',(#3284),#3288);+#3179 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3180 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#3181 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#3182 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#3183 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#3184 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#3185 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3187 = PCURVE('',#1501,#3188);+#3188 = DEFINITIONAL_REPRESENTATION('',(#3189),#3193);+#3189 = LINE('',#3190,#3191);+#3190 = CARTESIAN_POINT('',(0.,0.));+#3191 = VECTOR('',#3192,1.);+#3192 = DIRECTION('',(1.,0.));+#3193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3194 = ORIENTED_EDGE('',*,*,#3195,.T.);+#3195 = EDGE_CURVE('',#3168,#3196,#3198,.T.);+#3196 = VERTEX_POINT('',#3197);+#3197 = CARTESIAN_POINT('',(-0.971430759818,-1.125,0.206587955583));+#3198 = SURFACE_CURVE('',#3199,(#3203,#3210),.PCURVE_S1.);+#3199 = LINE('',#3200,#3201);+#3200 = CARTESIAN_POINT('',(-0.948480775301,-1.125,0.367364817767));+#3201 = VECTOR('',#3202,1.);+#3202 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#3203 = PCURVE('',#1394,#3204);+#3204 = DEFINITIONAL_REPRESENTATION('',(#3205),#3209);+#3205 = LINE('',#3206,#3207);+#3206 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#3207 = VECTOR('',#3208,1.);+#3208 = DIRECTION('',(-0.989965123745,-0.14131190243));+#3209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3210 = PCURVE('',#3211,#3216);+#3211 = PLANE('',#3212);+#3212 = AXIS2_PLACEMENT_3D('',#3213,#3214,#3215);+#3213 = CARTESIAN_POINT('',(-0.948480775301,-1.125,0.367364817767));+#3214 = DIRECTION('',(-0.989965123745,1.132755461042E-17,0.14131190243)+ );+#3215 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#3216 = DEFINITIONAL_REPRESENTATION('',(#3217),#3221);+#3217 = LINE('',#3218,#3219);+#3218 = CARTESIAN_POINT('',(0.,-0.));+#3219 = VECTOR('',#3220,1.);+#3220 = DIRECTION('',(1.,9.171740543228E-34));+#3221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3222 = ORIENTED_EDGE('',*,*,#3223,.T.);+#3223 = EDGE_CURVE('',#3196,#3224,#3226,.T.);+#3224 = VERTEX_POINT('',#3225);+#3225 = CARTESIAN_POINT('',(-1.217632698071,-1.125,5.551115123126E-17));+#3226 = SURFACE_CURVE('',#3227,(#3232,#3239),.PCURVE_S1.);+#3227 = CIRCLE('',#3228,0.25);+#3228 = AXIS2_PLACEMENT_3D('',#3229,#3230,#3231);+#3229 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.25));+#3230 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#3231 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#3232 = PCURVE('',#1394,#3233);+#3233 = DEFINITIONAL_REPRESENTATION('',(#3234),#3238);+#3234 = CIRCLE('',#3235,0.25);+#3235 = AXIS2_PLACEMENT_2D('',#3236,#3237);+#3236 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#3237 = DIRECTION('',(-0.173648177667,0.984807753012));+#3238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3239 = PCURVE('',#3240,#3245);+#3240 = CYLINDRICAL_SURFACE('',#3241,0.25);+#3241 = AXIS2_PLACEMENT_3D('',#3242,#3243,#3244);+#3242 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.25));+#3243 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3244 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#3245 = DEFINITIONAL_REPRESENTATION('',(#3246),#3250);+#3246 = LINE('',#3247,#3248);+#3247 = CARTESIAN_POINT('',(6.28318530718,0.));+#3248 = VECTOR('',#3249,1.);+#3249 = DIRECTION('',(-1.,0.));+#3250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3251 = ORIENTED_EDGE('',*,*,#3252,.T.);+#3252 = EDGE_CURVE('',#3224,#3253,#3255,.T.);+#3253 = VERTEX_POINT('',#3254);+#3254 = CARTESIAN_POINT('',(-1.4,-1.125,5.551115123126E-17));+#3255 = SURFACE_CURVE('',#3256,(#3260,#3267),.PCURVE_S1.);+#3256 = LINE('',#3257,#3258);+#3257 = CARTESIAN_POINT('',(-1.217632698071,-1.125,5.551115123126E-17));+#3258 = VECTOR('',#3259,1.);+#3259 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#3260 = PCURVE('',#1394,#3261);+#3261 = DEFINITIONAL_REPRESENTATION('',(#3262),#3266);+#3262 = LINE('',#3263,#3264);+#3263 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#3264 = VECTOR('',#3265,1.);+#3265 = DIRECTION('',(0.,-1.));+#3266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3267 = PCURVE('',#3268,#3273);+#3268 = PLANE('',#3269);+#3269 = AXIS2_PLACEMENT_3D('',#3270,#3271,#3272);+#3270 = CARTESIAN_POINT('',(-1.217632698071,-1.125,5.551115123126E-17));+#3271 = DIRECTION('',(0.,0.,1.));+#3272 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#3273 = DEFINITIONAL_REPRESENTATION('',(#3274),#3278);+#3274 = LINE('',#3275,#3276);+#3275 = CARTESIAN_POINT('',(0.,0.));+#3276 = VECTOR('',#3277,1.);+#3277 = DIRECTION('',(1.,0.));+#3278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3279 = ORIENTED_EDGE('',*,*,#3280,.T.);+#3280 = EDGE_CURVE('',#3253,#3281,#3283,.T.);+#3281 = VERTEX_POINT('',#3282);+#3282 = CARTESIAN_POINT('',(-1.4,-1.125,0.15));+#3283 = SURFACE_CURVE('',#3284,(#3288,#3295),.PCURVE_S1.); #3284 = LINE('',#3285,#3286);-#3285 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));+#3285 = CARTESIAN_POINT('',(-1.4,-1.125,5.551115123126E-17)); #3286 = VECTOR('',#3287,1.);-#3287 = DIRECTION('',(0.,-1.));-#3288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3289 = PCURVE('',#3290,#3295);-#3290 = PLANE('',#3291);-#3291 = AXIS2_PLACEMENT_3D('',#3292,#3293,#3294);-#3292 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));-#3293 = DIRECTION('',(0.,0.,1.));-#3294 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#3295 = DEFINITIONAL_REPRESENTATION('',(#3296),#3300);-#3296 = LINE('',#3297,#3298);-#3297 = CARTESIAN_POINT('',(0.,0.));-#3298 = VECTOR('',#3299,1.);-#3299 = DIRECTION('',(1.,0.));-#3300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3301 = ORIENTED_EDGE('',*,*,#3302,.T.);-#3302 = EDGE_CURVE('',#3275,#3303,#3305,.T.);-#3303 = VERTEX_POINT('',#3304);-#3304 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));-#3305 = SURFACE_CURVE('',#3306,(#3310,#3317),.PCURVE_S1.);-#3306 = LINE('',#3307,#3308);-#3307 = CARTESIAN_POINT('',(-1.4,-1.2,0.));-#3308 = VECTOR('',#3309,1.);-#3309 = DIRECTION('',(0.,0.,1.));-#3310 = PCURVE('',#1416,#3311);-#3311 = DEFINITIONAL_REPRESENTATION('',(#3312),#3316);+#3287 = DIRECTION('',(0.,0.,1.));+#3288 = PCURVE('',#1394,#3289);+#3289 = DEFINITIONAL_REPRESENTATION('',(#3290),#3294);+#3290 = LINE('',#3291,#3292);+#3291 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#3292 = VECTOR('',#3293,1.);+#3293 = DIRECTION('',(1.,0.));+#3294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3295 = PCURVE('',#3296,#3301);+#3296 = PLANE('',#3297);+#3297 = AXIS2_PLACEMENT_3D('',#3298,#3299,#3300);+#3298 = CARTESIAN_POINT('',(-1.4,-1.125,5.551115123126E-17));+#3299 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3300 = DIRECTION('',(0.,0.,1.));+#3301 = DEFINITIONAL_REPRESENTATION('',(#3302),#3306);+#3302 = LINE('',#3303,#3304);+#3303 = CARTESIAN_POINT('',(0.,0.));+#3304 = VECTOR('',#3305,1.);+#3305 = DIRECTION('',(1.,0.));+#3306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3307 = ORIENTED_EDGE('',*,*,#3308,.T.);+#3308 = EDGE_CURVE('',#3281,#3309,#3311,.T.);+#3309 = VERTEX_POINT('',#3310);+#3310 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.15));+#3311 = SURFACE_CURVE('',#3312,(#3316,#3323),.PCURVE_S1.); #3312 = LINE('',#3313,#3314);-#3313 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));+#3313 = CARTESIAN_POINT('',(-1.4,-1.125,0.15)); #3314 = VECTOR('',#3315,1.);-#3315 = DIRECTION('',(1.,0.));-#3316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3317 = PCURVE('',#3318,#3323);-#3318 = PLANE('',#3319);-#3319 = AXIS2_PLACEMENT_3D('',#3320,#3321,#3322);-#3320 = CARTESIAN_POINT('',(-1.4,-1.2,0.));-#3321 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3322 = DIRECTION('',(0.,0.,1.));-#3323 = DEFINITIONAL_REPRESENTATION('',(#3324),#3328);-#3324 = LINE('',#3325,#3326);-#3325 = CARTESIAN_POINT('',(0.,0.));-#3326 = VECTOR('',#3327,1.);-#3327 = DIRECTION('',(1.,0.));-#3328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3329 = ORIENTED_EDGE('',*,*,#3330,.T.);-#3330 = EDGE_CURVE('',#3303,#3331,#3333,.T.);-#3331 = VERTEX_POINT('',#3332);-#3332 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15));-#3333 = SURFACE_CURVE('',#3334,(#3338,#3345),.PCURVE_S1.);-#3334 = LINE('',#3335,#3336);-#3335 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));-#3336 = VECTOR('',#3337,1.);-#3337 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3338 = PCURVE('',#1416,#3339);-#3339 = DEFINITIONAL_REPRESENTATION('',(#3340),#3344);-#3340 = LINE('',#3341,#3342);-#3341 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#3342 = VECTOR('',#3343,1.);-#3343 = DIRECTION('',(0.,1.));-#3344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3345 = PCURVE('',#3346,#3351);-#3346 = PLANE('',#3347);-#3347 = AXIS2_PLACEMENT_3D('',#3348,#3349,#3350);-#3348 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));-#3349 = DIRECTION('',(0.,0.,-1.));-#3350 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3351 = DEFINITIONAL_REPRESENTATION('',(#3352),#3356);-#3352 = LINE('',#3353,#3354);-#3353 = CARTESIAN_POINT('',(0.,-0.));-#3354 = VECTOR('',#3355,1.);-#3355 = DIRECTION('',(1.,0.));-#3356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3357 = ORIENTED_EDGE('',*,*,#3358,.T.);-#3358 = EDGE_CURVE('',#3331,#3359,#3361,.T.);-#3359 = VERTEX_POINT('',#3360);-#3360 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));-#3361 = SURFACE_CURVE('',#3362,(#3367,#3378),.PCURVE_S1.);-#3362 = CIRCLE('',#3363,0.1);-#3363 = AXIS2_PLACEMENT_3D('',#3364,#3365,#3366);-#3364 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));-#3365 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3366 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#3367 = PCURVE('',#1416,#3368);-#3368 = DEFINITIONAL_REPRESENTATION('',(#3369),#3377);-#3369 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3370,#3371,#3372,#3373,-#3374,#3375,#3376),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3315 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3316 = PCURVE('',#1394,#3317);+#3317 = DEFINITIONAL_REPRESENTATION('',(#3318),#3322);+#3318 = LINE('',#3319,#3320);+#3319 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#3320 = VECTOR('',#3321,1.);+#3321 = DIRECTION('',(0.,1.));+#3322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3323 = PCURVE('',#3324,#3329);+#3324 = PLANE('',#3325);+#3325 = AXIS2_PLACEMENT_3D('',#3326,#3327,#3328);+#3326 = CARTESIAN_POINT('',(-1.4,-1.125,0.15));+#3327 = DIRECTION('',(0.,0.,-1.));+#3328 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3329 = DEFINITIONAL_REPRESENTATION('',(#3330),#3334);+#3330 = LINE('',#3331,#3332);+#3331 = CARTESIAN_POINT('',(0.,-0.));+#3332 = VECTOR('',#3333,1.);+#3333 = DIRECTION('',(1.,0.));+#3334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3335 = ORIENTED_EDGE('',*,*,#3336,.T.);+#3336 = EDGE_CURVE('',#3309,#3337,#3339,.T.);+#3337 = VERTEX_POINT('',#3338);+#3338 = CARTESIAN_POINT('',(-1.11915192277,-1.125,0.232635182233));+#3339 = SURFACE_CURVE('',#3340,(#3345,#3356),.PCURVE_S1.);+#3340 = CIRCLE('',#3341,0.1);+#3341 = AXIS2_PLACEMENT_3D('',#3342,#3343,#3344);+#3342 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.25));+#3343 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#3344 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#3345 = PCURVE('',#1394,#3346);+#3346 = DEFINITIONAL_REPRESENTATION('',(#3347),#3355);+#3347 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3348,#3349,#3350,#3351,+#3352,#3353,#3354),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3370 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3371 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#3372 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#3373 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#3374 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#3375 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#3376 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3378 = PCURVE('',#3379,#3384);-#3379 = CYLINDRICAL_SURFACE('',#3380,0.1);-#3380 = AXIS2_PLACEMENT_3D('',#3381,#3382,#3383);-#3381 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25));-#3382 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3383 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#3384 = DEFINITIONAL_REPRESENTATION('',(#3385),#3389);-#3385 = LINE('',#3386,#3387);-#3386 = CARTESIAN_POINT('',(0.,0.));-#3387 = VECTOR('',#3388,1.);-#3388 = DIRECTION('',(1.,0.));-#3389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3390 = ORIENTED_EDGE('',*,*,#3391,.T.);-#3391 = EDGE_CURVE('',#3359,#3392,#3394,.T.);-#3392 = VERTEX_POINT('',#3393);-#3393 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417));-#3394 = SURFACE_CURVE('',#3395,(#3399,#3406),.PCURVE_S1.);-#3395 = LINE('',#3396,#3397);-#3396 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));-#3397 = VECTOR('',#3398,1.);-#3398 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#3399 = PCURVE('',#1416,#3400);-#3400 = DEFINITIONAL_REPRESENTATION('',(#3401),#3405);-#3401 = LINE('',#3402,#3403);-#3402 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#3403 = VECTOR('',#3404,1.);-#3404 = DIRECTION('',(0.986721169868,0.162423314012));-#3405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3406 = PCURVE('',#3407,#3412);-#3407 = PLANE('',#3408);-#3408 = AXIS2_PLACEMENT_3D('',#3409,#3410,#3411);-#3409 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));-#3410 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012- ));-#3411 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#3412 = DEFINITIONAL_REPRESENTATION('',(#3413),#3417);-#3413 = LINE('',#3414,#3415);-#3414 = CARTESIAN_POINT('',(0.,0.));-#3415 = VECTOR('',#3416,1.);-#3416 = DIRECTION('',(1.,1.463835121412E-34));-#3417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3418 = ORIENTED_EDGE('',*,*,#3419,.T.);-#3419 = EDGE_CURVE('',#3392,#3420,#3422,.T.);-#3420 = VERTEX_POINT('',#3421);-#3421 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));-#3422 = SURFACE_CURVE('',#3423,(#3428,#3435),.PCURVE_S1.);-#3423 = CIRCLE('',#3424,0.25);-#3424 = AXIS2_PLACEMENT_3D('',#3425,#3426,#3427);-#3425 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));-#3426 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#3427 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#3428 = PCURVE('',#1416,#3429);-#3429 = DEFINITIONAL_REPRESENTATION('',(#3430),#3434);-#3430 = CIRCLE('',#3431,0.25);-#3431 = AXIS2_PLACEMENT_2D('',#3432,#3433);-#3432 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#3433 = DIRECTION('',(0.173648177667,-0.984807753012));-#3434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3435 = PCURVE('',#3436,#3441);-#3436 = CYLINDRICAL_SURFACE('',#3437,0.25);-#3437 = AXIS2_PLACEMENT_3D('',#3438,#3439,#3440);-#3438 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));-#3439 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3440 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#3441 = DEFINITIONAL_REPRESENTATION('',(#3442),#3446);-#3442 = LINE('',#3443,#3444);-#3443 = CARTESIAN_POINT('',(6.28318530718,0.));-#3444 = VECTOR('',#3445,1.);-#3445 = DIRECTION('',(-1.,0.));-#3446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3447 = ORIENTED_EDGE('',*,*,#3448,.T.);-#3448 = EDGE_CURVE('',#3420,#1401,#3449,.T.);-#3449 = SURFACE_CURVE('',#3450,(#3454,#3461),.PCURVE_S1.);-#3450 = LINE('',#3451,#3452);-#3451 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));-#3452 = VECTOR('',#3453,1.);-#3453 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3454 = PCURVE('',#1416,#3455);-#3455 = DEFINITIONAL_REPRESENTATION('',(#3456),#3460);-#3456 = LINE('',#3457,#3458);-#3457 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#3458 = VECTOR('',#3459,1.);-#3459 = DIRECTION('',(0.,1.));-#3460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3461 = PCURVE('',#2512,#3462);-#3462 = DEFINITIONAL_REPRESENTATION('',(#3463),#3467);-#3463 = LINE('',#3464,#3465);-#3464 = CARTESIAN_POINT('',(0.,-0.));-#3465 = VECTOR('',#3466,1.);-#3466 = DIRECTION('',(1.,0.));-#3467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3468 = ADVANCED_FACE('',(#3469),#1523,.F.);-#3469 = FACE_BOUND('',#3470,.F.);-#3470 = EDGE_LOOP('',(#3471,#3472,#3500,#3521));-#3471 = ORIENTED_EDGE('',*,*,#1509,.T.);-#3472 = ORIENTED_EDGE('',*,*,#3473,.T.);-#3473 = EDGE_CURVE('',#1482,#3474,#3476,.T.);-#3474 = VERTEX_POINT('',#3475);-#3475 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767));-#3476 = SURFACE_CURVE('',#3477,(#3482,#3489),.PCURVE_S1.);-#3477 = CIRCLE('',#3478,0.1);-#3478 = AXIS2_PLACEMENT_3D('',#3479,#3480,#3481);-#3479 = CARTESIAN_POINT('',(-0.85,-0.7,0.65));-#3480 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3481 = DIRECTION('',(0.,0.,1.));-#3482 = PCURVE('',#1523,#3483);-#3483 = DEFINITIONAL_REPRESENTATION('',(#3484),#3488);-#3484 = LINE('',#3485,#3486);-#3485 = CARTESIAN_POINT('',(0.,-0.5));-#3486 = VECTOR('',#3487,1.);-#3487 = DIRECTION('',(1.,0.));-#3488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3489 = PCURVE('',#1497,#3490);-#3490 = DEFINITIONAL_REPRESENTATION('',(#3491),#3499);-#3491 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3492,#3493,#3494,#3495,-#3496,#3497,#3498),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3348 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3349 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#3350 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#3351 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#3352 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#3353 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#3354 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3356 = PCURVE('',#3357,#3362);+#3357 = CYLINDRICAL_SURFACE('',#3358,0.1);+#3358 = AXIS2_PLACEMENT_3D('',#3359,#3360,#3361);+#3359 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.25));+#3360 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3361 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#3362 = DEFINITIONAL_REPRESENTATION('',(#3363),#3367);+#3363 = LINE('',#3364,#3365);+#3364 = CARTESIAN_POINT('',(0.,0.));+#3365 = VECTOR('',#3366,1.);+#3366 = DIRECTION('',(1.,0.));+#3367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3368 = ORIENTED_EDGE('',*,*,#3369,.T.);+#3369 = EDGE_CURVE('',#3337,#3370,#3372,.T.);+#3370 = VERTEX_POINT('',#3371);+#3371 = CARTESIAN_POINT('',(-1.096201938253,-1.125,0.393412044417));+#3372 = SURFACE_CURVE('',#3373,(#3377,#3384),.PCURVE_S1.);+#3373 = LINE('',#3374,#3375);+#3374 = CARTESIAN_POINT('',(-1.11915192277,-1.125,0.232635182233));+#3375 = VECTOR('',#3376,1.);+#3376 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#3377 = PCURVE('',#1394,#3378);+#3378 = DEFINITIONAL_REPRESENTATION('',(#3379),#3383);+#3379 = LINE('',#3380,#3381);+#3380 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#3381 = VECTOR('',#3382,1.);+#3382 = DIRECTION('',(0.989965123745,0.14131190243));+#3383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3384 = PCURVE('',#3385,#3390);+#3385 = PLANE('',#3386);+#3386 = AXIS2_PLACEMENT_3D('',#3387,#3388,#3389);+#3387 = CARTESIAN_POINT('',(-1.11915192277,-1.125,0.232635182233));+#3388 = DIRECTION('',(0.989965123745,-1.132755461042E-17,-0.14131190243)+ );+#3389 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#3390 = DEFINITIONAL_REPRESENTATION('',(#3391),#3395);+#3391 = LINE('',#3392,#3393);+#3392 = CARTESIAN_POINT('',(0.,-0.));+#3393 = VECTOR('',#3394,1.);+#3394 = DIRECTION('',(1.,-9.171740543228E-34));+#3395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3396 = ORIENTED_EDGE('',*,*,#3397,.T.);+#3397 = EDGE_CURVE('',#3370,#3398,#3400,.T.);+#3398 = VERTEX_POINT('',#3399);+#3399 = CARTESIAN_POINT('',(-0.85,-1.125,0.6));+#3400 = SURFACE_CURVE('',#3401,(#3406,#3413),.PCURVE_S1.);+#3401 = CIRCLE('',#3402,0.25);+#3402 = AXIS2_PLACEMENT_3D('',#3403,#3404,#3405);+#3403 = CARTESIAN_POINT('',(-0.85,-1.125,0.35));+#3404 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3405 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3406 = PCURVE('',#1394,#3407);+#3407 = DEFINITIONAL_REPRESENTATION('',(#3408),#3412);+#3408 = CIRCLE('',#3409,0.25);+#3409 = AXIS2_PLACEMENT_2D('',#3410,#3411);+#3410 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#3411 = DIRECTION('',(0.173648177667,-0.984807753012));+#3412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3413 = PCURVE('',#3414,#3419);+#3414 = CYLINDRICAL_SURFACE('',#3415,0.25);+#3415 = AXIS2_PLACEMENT_3D('',#3416,#3417,#3418);+#3416 = CARTESIAN_POINT('',(-0.85,-1.125,0.35));+#3417 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3418 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3419 = DEFINITIONAL_REPRESENTATION('',(#3420),#3424);+#3420 = LINE('',#3421,#3422);+#3421 = CARTESIAN_POINT('',(6.28318530718,0.));+#3422 = VECTOR('',#3423,1.);+#3423 = DIRECTION('',(-1.,0.));+#3424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3425 = ORIENTED_EDGE('',*,*,#3426,.T.);+#3426 = EDGE_CURVE('',#3398,#1379,#3427,.T.);+#3427 = SURFACE_CURVE('',#3428,(#3432,#3439),.PCURVE_S1.);+#3428 = LINE('',#3429,#3430);+#3429 = CARTESIAN_POINT('',(-0.85,-1.125,0.6));+#3430 = VECTOR('',#3431,1.);+#3431 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3432 = PCURVE('',#1394,#3433);+#3433 = DEFINITIONAL_REPRESENTATION('',(#3434),#3438);+#3434 = LINE('',#3435,#3436);+#3435 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#3436 = VECTOR('',#3437,1.);+#3437 = DIRECTION('',(0.,1.));+#3438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3439 = PCURVE('',#2490,#3440);+#3440 = DEFINITIONAL_REPRESENTATION('',(#3441),#3445);+#3441 = LINE('',#3442,#3443);+#3442 = CARTESIAN_POINT('',(0.,-0.));+#3443 = VECTOR('',#3444,1.);+#3444 = DIRECTION('',(1.,0.));+#3445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3446 = ADVANCED_FACE('',(#3447),#1501,.F.);+#3447 = FACE_BOUND('',#3448,.F.);+#3448 = EDGE_LOOP('',(#3449,#3450,#3478,#3499));+#3449 = ORIENTED_EDGE('',*,*,#1487,.T.);+#3450 = ORIENTED_EDGE('',*,*,#3451,.T.);+#3451 = EDGE_CURVE('',#1460,#3452,#3454,.T.);+#3452 = VERTEX_POINT('',#3453);+#3453 = CARTESIAN_POINT('',(-0.948480775301,-0.775,0.367364817767));+#3454 = SURFACE_CURVE('',#3455,(#3460,#3467),.PCURVE_S1.);+#3455 = CIRCLE('',#3456,0.1);+#3456 = AXIS2_PLACEMENT_3D('',#3457,#3458,#3459);+#3457 = CARTESIAN_POINT('',(-0.85,-0.775,0.35));+#3458 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3459 = DIRECTION('',(0.,0.,1.));+#3460 = PCURVE('',#1501,#3461);+#3461 = DEFINITIONAL_REPRESENTATION('',(#3462),#3466);+#3462 = LINE('',#3463,#3464);+#3463 = CARTESIAN_POINT('',(0.,-0.35));+#3464 = VECTOR('',#3465,1.);+#3465 = DIRECTION('',(1.,0.));+#3466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3467 = PCURVE('',#1475,#3468);+#3468 = DEFINITIONAL_REPRESENTATION('',(#3469),#3477);+#3469 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3470,#3471,#3472,#3473,+#3474,#3475,#3476),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3492 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3493 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#3494 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#3495 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#3496 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#3497 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#3498 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3500 = ORIENTED_EDGE('',*,*,#3501,.F.);-#3501 = EDGE_CURVE('',#3190,#3474,#3502,.T.);-#3502 = SURFACE_CURVE('',#3503,(#3507,#3514),.PCURVE_S1.);-#3503 = LINE('',#3504,#3505);-#3504 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767));-#3505 = VECTOR('',#3506,1.);-#3506 = DIRECTION('',(1.144237745222E-17,1.,0.));-#3507 = PCURVE('',#1523,#3508);-#3508 = DEFINITIONAL_REPRESENTATION('',(#3509),#3513);-#3509 = LINE('',#3510,#3511);-#3510 = CARTESIAN_POINT('',(1.396263401592,0.));-#3511 = VECTOR('',#3512,1.);-#3512 = DIRECTION('',(0.,-1.));-#3513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3514 = PCURVE('',#3233,#3515);-#3515 = DEFINITIONAL_REPRESENTATION('',(#3516),#3520);-#3516 = LINE('',#3517,#3518);-#3517 = CARTESIAN_POINT('',(0.,0.));-#3518 = VECTOR('',#3519,1.);-#3519 = DIRECTION('',(-1.7573160551E-30,-1.));-#3520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3521 = ORIENTED_EDGE('',*,*,#3189,.F.);-#3522 = ADVANCED_FACE('',(#3523),#1497,.T.);-#3523 = FACE_BOUND('',#3524,.T.);-#3524 = EDGE_LOOP('',(#3525,#3526,#3527,#3528,#3551,#3575,#3598,#3621,- #3644,#3672,#3695,#3719));-#3525 = ORIENTED_EDGE('',*,*,#1538,.F.);-#3526 = ORIENTED_EDGE('',*,*,#1481,.T.);-#3527 = ORIENTED_EDGE('',*,*,#3473,.T.);-#3528 = ORIENTED_EDGE('',*,*,#3529,.T.);-#3529 = EDGE_CURVE('',#3474,#3530,#3532,.T.);-#3530 = VERTEX_POINT('',#3531);-#3531 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583));-#3532 = SURFACE_CURVE('',#3533,(#3537,#3544),.PCURVE_S1.);-#3533 = LINE('',#3534,#3535);-#3534 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767));-#3535 = VECTOR('',#3536,1.);-#3536 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#3537 = PCURVE('',#1497,#3538);-#3538 = DEFINITIONAL_REPRESENTATION('',(#3539),#3543);-#3539 = LINE('',#3540,#3541);-#3540 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#3541 = VECTOR('',#3542,1.);-#3542 = DIRECTION('',(-0.986721169868,-0.162423314012));-#3543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3544 = PCURVE('',#3233,#3545);-#3545 = DEFINITIONAL_REPRESENTATION('',(#3546),#3550);-#3546 = LINE('',#3547,#3548);-#3547 = CARTESIAN_POINT('',(9.292544329819E-19,-0.5));-#3548 = VECTOR('',#3549,1.);-#3549 = DIRECTION('',(1.,-1.463835121412E-34));-#3550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3551 = ORIENTED_EDGE('',*,*,#3552,.T.);-#3552 = EDGE_CURVE('',#3530,#3553,#3555,.T.);-#3553 = VERTEX_POINT('',#3554);-#3554 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.));-#3555 = SURFACE_CURVE('',#3556,(#3561,#3568),.PCURVE_S1.);-#3556 = CIRCLE('',#3557,0.25);-#3557 = AXIS2_PLACEMENT_3D('',#3558,#3559,#3560);-#3558 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25));-#3559 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#3560 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#3561 = PCURVE('',#1497,#3562);-#3562 = DEFINITIONAL_REPRESENTATION('',(#3563),#3567);-#3563 = CIRCLE('',#3564,0.25);-#3564 = AXIS2_PLACEMENT_2D('',#3565,#3566);-#3565 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#3566 = DIRECTION('',(-0.173648177667,0.984807753012));-#3567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3568 = PCURVE('',#3262,#3569);-#3569 = DEFINITIONAL_REPRESENTATION('',(#3570),#3574);-#3570 = LINE('',#3571,#3572);-#3571 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#3572 = VECTOR('',#3573,1.);-#3573 = DIRECTION('',(-1.,0.));-#3574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3575 = ORIENTED_EDGE('',*,*,#3576,.T.);-#3576 = EDGE_CURVE('',#3553,#3577,#3579,.T.);-#3577 = VERTEX_POINT('',#3578);-#3578 = CARTESIAN_POINT('',(-1.4,-0.7,0.));-#3579 = SURFACE_CURVE('',#3580,(#3584,#3591),.PCURVE_S1.);-#3580 = LINE('',#3581,#3582);-#3581 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.));-#3582 = VECTOR('',#3583,1.);-#3583 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#3584 = PCURVE('',#1497,#3585);-#3585 = DEFINITIONAL_REPRESENTATION('',(#3586),#3590);-#3586 = LINE('',#3587,#3588);-#3587 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));-#3588 = VECTOR('',#3589,1.);-#3589 = DIRECTION('',(0.,-1.));-#3590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3591 = PCURVE('',#3290,#3592);-#3592 = DEFINITIONAL_REPRESENTATION('',(#3593),#3597);-#3593 = LINE('',#3594,#3595);-#3594 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#3595 = VECTOR('',#3596,1.);-#3596 = DIRECTION('',(1.,0.));-#3597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3598 = ORIENTED_EDGE('',*,*,#3599,.T.);-#3599 = EDGE_CURVE('',#3577,#3600,#3602,.T.);-#3600 = VERTEX_POINT('',#3601);-#3601 = CARTESIAN_POINT('',(-1.4,-0.7,0.15));-#3602 = SURFACE_CURVE('',#3603,(#3607,#3614),.PCURVE_S1.);-#3603 = LINE('',#3604,#3605);-#3604 = CARTESIAN_POINT('',(-1.4,-0.7,0.));-#3605 = VECTOR('',#3606,1.);-#3606 = DIRECTION('',(0.,0.,1.));-#3607 = PCURVE('',#1497,#3608);-#3608 = DEFINITIONAL_REPRESENTATION('',(#3609),#3613);-#3609 = LINE('',#3610,#3611);-#3610 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));-#3611 = VECTOR('',#3612,1.);-#3612 = DIRECTION('',(1.,0.));-#3613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3614 = PCURVE('',#3318,#3615);-#3615 = DEFINITIONAL_REPRESENTATION('',(#3616),#3620);-#3616 = LINE('',#3617,#3618);-#3617 = CARTESIAN_POINT('',(0.,-0.5));-#3618 = VECTOR('',#3619,1.);-#3619 = DIRECTION('',(1.,0.));-#3620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3621 = ORIENTED_EDGE('',*,*,#3622,.T.);-#3622 = EDGE_CURVE('',#3600,#3623,#3625,.T.);-#3623 = VERTEX_POINT('',#3624);-#3624 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15));-#3625 = SURFACE_CURVE('',#3626,(#3630,#3637),.PCURVE_S1.);-#3626 = LINE('',#3627,#3628);-#3627 = CARTESIAN_POINT('',(-1.4,-0.7,0.15));-#3628 = VECTOR('',#3629,1.);-#3629 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3630 = PCURVE('',#1497,#3631);-#3631 = DEFINITIONAL_REPRESENTATION('',(#3632),#3636);-#3632 = LINE('',#3633,#3634);-#3633 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#3634 = VECTOR('',#3635,1.);-#3635 = DIRECTION('',(0.,1.));-#3636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3637 = PCURVE('',#3346,#3638);-#3638 = DEFINITIONAL_REPRESENTATION('',(#3639),#3643);-#3639 = LINE('',#3640,#3641);-#3640 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#3641 = VECTOR('',#3642,1.);-#3642 = DIRECTION('',(1.,0.));-#3643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3644 = ORIENTED_EDGE('',*,*,#3645,.T.);-#3645 = EDGE_CURVE('',#3623,#3646,#3648,.T.);-#3646 = VERTEX_POINT('',#3647);-#3647 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233));-#3648 = SURFACE_CURVE('',#3649,(#3654,#3665),.PCURVE_S1.);-#3649 = CIRCLE('',#3650,0.1);-#3650 = AXIS2_PLACEMENT_3D('',#3651,#3652,#3653);-#3651 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25));-#3652 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3653 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#3654 = PCURVE('',#1497,#3655);-#3655 = DEFINITIONAL_REPRESENTATION('',(#3656),#3664);-#3656 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3657,#3658,#3659,#3660,-#3661,#3662,#3663),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3470 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3471 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#3472 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#3473 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#3474 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#3475 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#3476 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3478 = ORIENTED_EDGE('',*,*,#3479,.F.);+#3479 = EDGE_CURVE('',#3168,#3452,#3480,.T.);+#3480 = SURFACE_CURVE('',#3481,(#3485,#3492),.PCURVE_S1.);+#3481 = LINE('',#3482,#3483);+#3482 = CARTESIAN_POINT('',(-0.948480775301,-1.125,0.367364817767));+#3483 = VECTOR('',#3484,1.);+#3484 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3485 = PCURVE('',#1501,#3486);+#3486 = DEFINITIONAL_REPRESENTATION('',(#3487),#3491);+#3487 = LINE('',#3488,#3489);+#3488 = CARTESIAN_POINT('',(1.396263401592,0.));+#3489 = VECTOR('',#3490,1.);+#3490 = DIRECTION('',(0.,-1.));+#3491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3492 = PCURVE('',#3211,#3493);+#3493 = DEFINITIONAL_REPRESENTATION('',(#3494),#3498);+#3494 = LINE('',#3495,#3496);+#3495 = CARTESIAN_POINT('',(0.,-0.));+#3496 = VECTOR('',#3497,1.);+#3497 = DIRECTION('',(2.656255567127E-30,-1.));+#3498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3499 = ORIENTED_EDGE('',*,*,#3167,.F.);+#3500 = ADVANCED_FACE('',(#3501),#1475,.T.);+#3501 = FACE_BOUND('',#3502,.T.);+#3502 = EDGE_LOOP('',(#3503,#3504,#3505,#3506,#3529,#3553,#3576,#3599,+ #3622,#3650,#3673,#3697));+#3503 = ORIENTED_EDGE('',*,*,#1516,.F.);+#3504 = ORIENTED_EDGE('',*,*,#1459,.T.);+#3505 = ORIENTED_EDGE('',*,*,#3451,.T.);+#3506 = ORIENTED_EDGE('',*,*,#3507,.T.);+#3507 = EDGE_CURVE('',#3452,#3508,#3510,.T.);+#3508 = VERTEX_POINT('',#3509);+#3509 = CARTESIAN_POINT('',(-0.971430759818,-0.775,0.206587955583));+#3510 = SURFACE_CURVE('',#3511,(#3515,#3522),.PCURVE_S1.);+#3511 = LINE('',#3512,#3513);+#3512 = CARTESIAN_POINT('',(-0.948480775301,-0.775,0.367364817767));+#3513 = VECTOR('',#3514,1.);+#3514 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#3515 = PCURVE('',#1475,#3516);+#3516 = DEFINITIONAL_REPRESENTATION('',(#3517),#3521);+#3517 = LINE('',#3518,#3519);+#3518 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#3519 = VECTOR('',#3520,1.);+#3520 = DIRECTION('',(-0.989965123745,-0.14131190243));+#3521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3522 = PCURVE('',#3211,#3523);+#3523 = DEFINITIONAL_REPRESENTATION('',(#3524),#3528);+#3524 = LINE('',#3525,#3526);+#3525 = CARTESIAN_POINT('',(5.659304441343E-19,-0.35));+#3526 = VECTOR('',#3527,1.);+#3527 = DIRECTION('',(1.,9.171740543228E-34));+#3528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3529 = ORIENTED_EDGE('',*,*,#3530,.T.);+#3530 = EDGE_CURVE('',#3508,#3531,#3533,.T.);+#3531 = VERTEX_POINT('',#3532);+#3532 = CARTESIAN_POINT('',(-1.217632698071,-0.775,5.551115123126E-17));+#3533 = SURFACE_CURVE('',#3534,(#3539,#3546),.PCURVE_S1.);+#3534 = CIRCLE('',#3535,0.25);+#3535 = AXIS2_PLACEMENT_3D('',#3536,#3537,#3538);+#3536 = CARTESIAN_POINT('',(-1.217632698071,-0.775,0.25));+#3537 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#3538 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#3539 = PCURVE('',#1475,#3540);+#3540 = DEFINITIONAL_REPRESENTATION('',(#3541),#3545);+#3541 = CIRCLE('',#3542,0.25);+#3542 = AXIS2_PLACEMENT_2D('',#3543,#3544);+#3543 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#3544 = DIRECTION('',(-0.173648177667,0.984807753012));+#3545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3546 = PCURVE('',#3240,#3547);+#3547 = DEFINITIONAL_REPRESENTATION('',(#3548),#3552);+#3548 = LINE('',#3549,#3550);+#3549 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#3550 = VECTOR('',#3551,1.);+#3551 = DIRECTION('',(-1.,0.));+#3552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3553 = ORIENTED_EDGE('',*,*,#3554,.T.);+#3554 = EDGE_CURVE('',#3531,#3555,#3557,.T.);+#3555 = VERTEX_POINT('',#3556);+#3556 = CARTESIAN_POINT('',(-1.4,-0.775,5.551115123126E-17));+#3557 = SURFACE_CURVE('',#3558,(#3562,#3569),.PCURVE_S1.);+#3558 = LINE('',#3559,#3560);+#3559 = CARTESIAN_POINT('',(-1.217632698071,-0.775,5.551115123126E-17));+#3560 = VECTOR('',#3561,1.);+#3561 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#3562 = PCURVE('',#1475,#3563);+#3563 = DEFINITIONAL_REPRESENTATION('',(#3564),#3568);+#3564 = LINE('',#3565,#3566);+#3565 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(0.,-1.));+#3568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3569 = PCURVE('',#3268,#3570);+#3570 = DEFINITIONAL_REPRESENTATION('',(#3571),#3575);+#3571 = LINE('',#3572,#3573);+#3572 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#3573 = VECTOR('',#3574,1.);+#3574 = DIRECTION('',(1.,0.));+#3575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3576 = ORIENTED_EDGE('',*,*,#3577,.T.);+#3577 = EDGE_CURVE('',#3555,#3578,#3580,.T.);+#3578 = VERTEX_POINT('',#3579);+#3579 = CARTESIAN_POINT('',(-1.4,-0.775,0.15));+#3580 = SURFACE_CURVE('',#3581,(#3585,#3592),.PCURVE_S1.);+#3581 = LINE('',#3582,#3583);+#3582 = CARTESIAN_POINT('',(-1.4,-0.775,5.551115123126E-17));+#3583 = VECTOR('',#3584,1.);+#3584 = DIRECTION('',(0.,0.,1.));+#3585 = PCURVE('',#1475,#3586);+#3586 = DEFINITIONAL_REPRESENTATION('',(#3587),#3591);+#3587 = LINE('',#3588,#3589);+#3588 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#3589 = VECTOR('',#3590,1.);+#3590 = DIRECTION('',(1.,0.));+#3591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3592 = PCURVE('',#3296,#3593);+#3593 = DEFINITIONAL_REPRESENTATION('',(#3594),#3598);+#3594 = LINE('',#3595,#3596);+#3595 = CARTESIAN_POINT('',(0.,-0.35));+#3596 = VECTOR('',#3597,1.);+#3597 = DIRECTION('',(1.,0.));+#3598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3599 = ORIENTED_EDGE('',*,*,#3600,.T.);+#3600 = EDGE_CURVE('',#3578,#3601,#3603,.T.);+#3601 = VERTEX_POINT('',#3602);+#3602 = CARTESIAN_POINT('',(-1.217632698071,-0.775,0.15));+#3603 = SURFACE_CURVE('',#3604,(#3608,#3615),.PCURVE_S1.);+#3604 = LINE('',#3605,#3606);+#3605 = CARTESIAN_POINT('',(-1.4,-0.775,0.15));+#3606 = VECTOR('',#3607,1.);+#3607 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3608 = PCURVE('',#1475,#3609);+#3609 = DEFINITIONAL_REPRESENTATION('',(#3610),#3614);+#3610 = LINE('',#3611,#3612);+#3611 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#3612 = VECTOR('',#3613,1.);+#3613 = DIRECTION('',(0.,1.));+#3614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3615 = PCURVE('',#3324,#3616);+#3616 = DEFINITIONAL_REPRESENTATION('',(#3617),#3621);+#3617 = LINE('',#3618,#3619);+#3618 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#3619 = VECTOR('',#3620,1.);+#3620 = DIRECTION('',(1.,0.));+#3621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3622 = ORIENTED_EDGE('',*,*,#3623,.T.);+#3623 = EDGE_CURVE('',#3601,#3624,#3626,.T.);+#3624 = VERTEX_POINT('',#3625);+#3625 = CARTESIAN_POINT('',(-1.11915192277,-0.775,0.232635182233));+#3626 = SURFACE_CURVE('',#3627,(#3632,#3643),.PCURVE_S1.);+#3627 = CIRCLE('',#3628,0.1);+#3628 = AXIS2_PLACEMENT_3D('',#3629,#3630,#3631);+#3629 = CARTESIAN_POINT('',(-1.217632698071,-0.775,0.25));+#3630 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#3631 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#3632 = PCURVE('',#1475,#3633);+#3633 = DEFINITIONAL_REPRESENTATION('',(#3634),#3642);+#3634 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3635,#3636,#3637,#3638,+#3639,#3640,#3641),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3657 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3658 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#3659 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#3660 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#3661 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#3662 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#3663 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3665 = PCURVE('',#3379,#3666);-#3666 = DEFINITIONAL_REPRESENTATION('',(#3667),#3671);-#3667 = LINE('',#3668,#3669);-#3668 = CARTESIAN_POINT('',(0.,-0.5));-#3669 = VECTOR('',#3670,1.);-#3670 = DIRECTION('',(1.,0.));-#3671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3672 = ORIENTED_EDGE('',*,*,#3673,.T.);-#3673 = EDGE_CURVE('',#3646,#3674,#3676,.T.);-#3674 = VERTEX_POINT('',#3675);-#3675 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417));-#3676 = SURFACE_CURVE('',#3677,(#3681,#3688),.PCURVE_S1.);-#3677 = LINE('',#3678,#3679);-#3678 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233));-#3679 = VECTOR('',#3680,1.);-#3680 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#3681 = PCURVE('',#1497,#3682);-#3682 = DEFINITIONAL_REPRESENTATION('',(#3683),#3687);-#3683 = LINE('',#3684,#3685);-#3684 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#3685 = VECTOR('',#3686,1.);-#3686 = DIRECTION('',(0.986721169868,0.162423314012));-#3687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3688 = PCURVE('',#3407,#3689);-#3689 = DEFINITIONAL_REPRESENTATION('',(#3690),#3694);-#3690 = LINE('',#3691,#3692);-#3691 = CARTESIAN_POINT('',(-9.292544329819E-19,-0.5));-#3692 = VECTOR('',#3693,1.);-#3693 = DIRECTION('',(1.,1.463835121412E-34));-#3694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3695 = ORIENTED_EDGE('',*,*,#3696,.T.);-#3696 = EDGE_CURVE('',#3674,#3697,#3699,.T.);-#3697 = VERTEX_POINT('',#3698);-#3698 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));-#3699 = SURFACE_CURVE('',#3700,(#3705,#3712),.PCURVE_S1.);-#3700 = CIRCLE('',#3701,0.25);-#3701 = AXIS2_PLACEMENT_3D('',#3702,#3703,#3704);-#3702 = CARTESIAN_POINT('',(-0.85,-0.7,0.65));-#3703 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#3704 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#3705 = PCURVE('',#1497,#3706);-#3706 = DEFINITIONAL_REPRESENTATION('',(#3707),#3711);-#3707 = CIRCLE('',#3708,0.25);-#3708 = AXIS2_PLACEMENT_2D('',#3709,#3710);-#3709 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#3710 = DIRECTION('',(0.173648177667,-0.984807753012));-#3711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3712 = PCURVE('',#3436,#3713);-#3713 = DEFINITIONAL_REPRESENTATION('',(#3714),#3718);-#3714 = LINE('',#3715,#3716);-#3715 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#3716 = VECTOR('',#3717,1.);-#3717 = DIRECTION('',(-1.,0.));-#3718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3719 = ORIENTED_EDGE('',*,*,#3720,.T.);-#3720 = EDGE_CURVE('',#3697,#1539,#3721,.T.);-#3721 = SURFACE_CURVE('',#3722,(#3726,#3733),.PCURVE_S1.);-#3722 = LINE('',#3723,#3724);-#3723 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));-#3724 = VECTOR('',#3725,1.);-#3725 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3726 = PCURVE('',#1497,#3727);-#3727 = DEFINITIONAL_REPRESENTATION('',(#3728),#3732);-#3728 = LINE('',#3729,#3730);-#3729 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#3730 = VECTOR('',#3731,1.);-#3731 = DIRECTION('',(0.,1.));-#3732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3733 = PCURVE('',#2512,#3734);-#3734 = DEFINITIONAL_REPRESENTATION('',(#3735),#3739);-#3735 = LINE('',#3736,#3737);-#3736 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#3737 = VECTOR('',#3738,1.);-#3738 = DIRECTION('',(1.,0.));-#3739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3740 = ADVANCED_FACE('',(#3741),#1604,.F.);-#3741 = FACE_BOUND('',#3742,.F.);-#3742 = EDGE_LOOP('',(#3743,#3744,#3765,#3766));-#3743 = ORIENTED_EDGE('',*,*,#1590,.T.);-#3744 = ORIENTED_EDGE('',*,*,#3745,.T.);-#3745 = EDGE_CURVE('',#1563,#2525,#3746,.T.);+#3635 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3636 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#3637 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#3638 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#3639 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#3640 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#3641 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3643 = PCURVE('',#3357,#3644);+#3644 = DEFINITIONAL_REPRESENTATION('',(#3645),#3649);+#3645 = LINE('',#3646,#3647);+#3646 = CARTESIAN_POINT('',(0.,-0.35));+#3647 = VECTOR('',#3648,1.);+#3648 = DIRECTION('',(1.,0.));+#3649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3650 = ORIENTED_EDGE('',*,*,#3651,.T.);+#3651 = EDGE_CURVE('',#3624,#3652,#3654,.T.);+#3652 = VERTEX_POINT('',#3653);+#3653 = CARTESIAN_POINT('',(-1.096201938253,-0.775,0.393412044417));+#3654 = SURFACE_CURVE('',#3655,(#3659,#3666),.PCURVE_S1.);+#3655 = LINE('',#3656,#3657);+#3656 = CARTESIAN_POINT('',(-1.11915192277,-0.775,0.232635182233));+#3657 = VECTOR('',#3658,1.);+#3658 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#3659 = PCURVE('',#1475,#3660);+#3660 = DEFINITIONAL_REPRESENTATION('',(#3661),#3665);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(0.989965123745,0.14131190243));+#3665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3666 = PCURVE('',#3385,#3667);+#3667 = DEFINITIONAL_REPRESENTATION('',(#3668),#3672);+#3668 = LINE('',#3669,#3670);+#3669 = CARTESIAN_POINT('',(-5.659304441343E-19,-0.35));+#3670 = VECTOR('',#3671,1.);+#3671 = DIRECTION('',(1.,-9.171740543228E-34));+#3672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3673 = ORIENTED_EDGE('',*,*,#3674,.T.);+#3674 = EDGE_CURVE('',#3652,#3675,#3677,.T.);+#3675 = VERTEX_POINT('',#3676);+#3676 = CARTESIAN_POINT('',(-0.85,-0.775,0.6));+#3677 = SURFACE_CURVE('',#3678,(#3683,#3690),.PCURVE_S1.);+#3678 = CIRCLE('',#3679,0.25);+#3679 = AXIS2_PLACEMENT_3D('',#3680,#3681,#3682);+#3680 = CARTESIAN_POINT('',(-0.85,-0.775,0.35));+#3681 = DIRECTION('',(1.144237745222E-17,1.,0.));+#3682 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#3683 = PCURVE('',#1475,#3684);+#3684 = DEFINITIONAL_REPRESENTATION('',(#3685),#3689);+#3685 = CIRCLE('',#3686,0.25);+#3686 = AXIS2_PLACEMENT_2D('',#3687,#3688);+#3687 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#3688 = DIRECTION('',(0.173648177667,-0.984807753012));+#3689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3690 = PCURVE('',#3414,#3691);+#3691 = DEFINITIONAL_REPRESENTATION('',(#3692),#3696);+#3692 = LINE('',#3693,#3694);+#3693 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#3694 = VECTOR('',#3695,1.);+#3695 = DIRECTION('',(-1.,0.));+#3696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3697 = ORIENTED_EDGE('',*,*,#3698,.T.);+#3698 = EDGE_CURVE('',#3675,#1517,#3699,.T.);+#3699 = SURFACE_CURVE('',#3700,(#3704,#3711),.PCURVE_S1.);+#3700 = LINE('',#3701,#3702);+#3701 = CARTESIAN_POINT('',(-0.85,-0.775,0.6));+#3702 = VECTOR('',#3703,1.);+#3703 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3704 = PCURVE('',#1475,#3705);+#3705 = DEFINITIONAL_REPRESENTATION('',(#3706),#3710);+#3706 = LINE('',#3707,#3708);+#3707 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#3708 = VECTOR('',#3709,1.);+#3709 = DIRECTION('',(0.,1.));+#3710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3711 = PCURVE('',#2490,#3712);+#3712 = DEFINITIONAL_REPRESENTATION('',(#3713),#3717);+#3713 = LINE('',#3714,#3715);+#3714 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#3715 = VECTOR('',#3716,1.);+#3716 = DIRECTION('',(1.,0.));+#3717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3718 = ADVANCED_FACE('',(#3719),#1582,.F.);+#3719 = FACE_BOUND('',#3720,.F.);+#3720 = EDGE_LOOP('',(#3721,#3722,#3743,#3744));+#3721 = ORIENTED_EDGE('',*,*,#1568,.T.);+#3722 = ORIENTED_EDGE('',*,*,#3723,.T.);+#3723 = EDGE_CURVE('',#1541,#2503,#3724,.T.);+#3724 = SURFACE_CURVE('',#3725,(#3729,#3736),.PCURVE_S1.);+#3725 = LINE('',#3726,#3727);+#3726 = CARTESIAN_POINT('',(-0.85,-0.175,0.6));+#3727 = VECTOR('',#3728,1.);+#3728 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3729 = PCURVE('',#1582,#3730);+#3730 = DEFINITIONAL_REPRESENTATION('',(#3731),#3735);+#3731 = LINE('',#3732,#3733);+#3732 = CARTESIAN_POINT('',(-0.85,1.6125));+#3733 = VECTOR('',#3734,1.);+#3734 = DIRECTION('',(1.,1.633645143532E-16));+#3735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3736 = PCURVE('',#2541,#3737);+#3737 = DEFINITIONAL_REPRESENTATION('',(#3738),#3742);+#3738 = LINE('',#3739,#3740);+#3739 = CARTESIAN_POINT('',(0.,-0.));+#3740 = VECTOR('',#3741,1.);+#3741 = DIRECTION('',(1.,0.));+#3742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3743 = ORIENTED_EDGE('',*,*,#2502,.F.);+#3744 = ORIENTED_EDGE('',*,*,#3745,.F.);+#3745 = EDGE_CURVE('',#1517,#2475,#3746,.T.); #3746 = SURFACE_CURVE('',#3747,(#3751,#3758),.PCURVE_S1.); #3747 = LINE('',#3748,#3749);-#3748 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#3748 = CARTESIAN_POINT('',(-0.85,-0.775,0.6)); #3749 = VECTOR('',#3750,1.); #3750 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3751 = PCURVE('',#1604,#3752);+#3751 = PCURVE('',#1582,#3752); #3752 = DEFINITIONAL_REPRESENTATION('',(#3753),#3757); #3753 = LINE('',#3754,#3755);-#3754 = CARTESIAN_POINT('',(-0.85,1.6875));+#3754 = CARTESIAN_POINT('',(-0.85,2.2125)); #3755 = VECTOR('',#3756,1.); #3756 = DIRECTION('',(1.,1.633645143532E-16)); #3757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3758 = PCURVE('',#2563,#3759);+#3758 = PCURVE('',#2490,#3759); #3759 = DEFINITIONAL_REPRESENTATION('',(#3760),#3764); #3760 = LINE('',#3761,#3762);-#3761 = CARTESIAN_POINT('',(0.,-0.));+#3761 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35)); #3762 = VECTOR('',#3763,1.); #3763 = DIRECTION('',(1.,0.)); #3764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#3765 = ORIENTED_EDGE('',*,*,#2524,.F.);-#3766 = ORIENTED_EDGE('',*,*,#3767,.F.);-#3767 = EDGE_CURVE('',#1539,#2497,#3768,.T.);-#3768 = SURFACE_CURVE('',#3769,(#3773,#3780),.PCURVE_S1.);-#3769 = LINE('',#3770,#3771);-#3770 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));-#3771 = VECTOR('',#3772,1.);-#3772 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3773 = PCURVE('',#1604,#3774);-#3774 = DEFINITIONAL_REPRESENTATION('',(#3775),#3779);-#3775 = LINE('',#3776,#3777);-#3776 = CARTESIAN_POINT('',(-0.85,2.1375));-#3777 = VECTOR('',#3778,1.);-#3778 = DIRECTION('',(1.,1.633645143532E-16));-#3779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3780 = PCURVE('',#2512,#3781);-#3781 = DEFINITIONAL_REPRESENTATION('',(#3782),#3786);-#3782 = LINE('',#3783,#3784);-#3783 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#3784 = VECTOR('',#3785,1.);-#3785 = DIRECTION('',(1.,0.));-#3786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3787 = ADVANCED_FACE('',(#3788),#1578,.F.);-#3788 = FACE_BOUND('',#3789,.F.);-#3789 = EDGE_LOOP('',(#3790,#3791,#3792,#3820,#3848,#3877,#3905,#3933,- #3961,#3994,#4022,#4051));-#3790 = ORIENTED_EDGE('',*,*,#1562,.F.);-#3791 = ORIENTED_EDGE('',*,*,#1619,.T.);-#3792 = ORIENTED_EDGE('',*,*,#3793,.T.);-#3793 = EDGE_CURVE('',#1620,#3794,#3796,.T.);-#3794 = VERTEX_POINT('',#3795);-#3795 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));-#3796 = SURFACE_CURVE('',#3797,(#3802,#3813),.PCURVE_S1.);-#3797 = CIRCLE('',#3798,0.1);-#3798 = AXIS2_PLACEMENT_3D('',#3799,#3800,#3801);-#3799 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));-#3800 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3801 = DIRECTION('',(0.,0.,1.));-#3802 = PCURVE('',#1578,#3803);-#3803 = DEFINITIONAL_REPRESENTATION('',(#3804),#3812);-#3804 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3805,#3806,#3807,#3808,-#3809,#3810,#3811),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3765 = ADVANCED_FACE('',(#3766),#1556,.F.);+#3766 = FACE_BOUND('',#3767,.F.);+#3767 = EDGE_LOOP('',(#3768,#3769,#3770,#3798,#3826,#3855,#3883,#3911,+ #3939,#3972,#4000,#4029));+#3768 = ORIENTED_EDGE('',*,*,#1540,.F.);+#3769 = ORIENTED_EDGE('',*,*,#1597,.T.);+#3770 = ORIENTED_EDGE('',*,*,#3771,.T.);+#3771 = EDGE_CURVE('',#1598,#3772,#3774,.T.);+#3772 = VERTEX_POINT('',#3773);+#3773 = CARTESIAN_POINT('',(-0.948480775301,-0.175,0.367364817767));+#3774 = SURFACE_CURVE('',#3775,(#3780,#3791),.PCURVE_S1.);+#3775 = CIRCLE('',#3776,0.1);+#3776 = AXIS2_PLACEMENT_3D('',#3777,#3778,#3779);+#3777 = CARTESIAN_POINT('',(-0.85,-0.175,0.35));+#3778 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3779 = DIRECTION('',(0.,0.,1.));+#3780 = PCURVE('',#1556,#3781);+#3781 = DEFINITIONAL_REPRESENTATION('',(#3782),#3790);+#3782 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3783,#3784,#3785,#3786,+#3787,#3788,#3789),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3805 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3806 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#3807 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#3808 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#3809 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#3810 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#3811 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#3812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3813 = PCURVE('',#1685,#3814);-#3814 = DEFINITIONAL_REPRESENTATION('',(#3815),#3819);-#3815 = LINE('',#3816,#3817);-#3816 = CARTESIAN_POINT('',(0.,0.));-#3817 = VECTOR('',#3818,1.);-#3818 = DIRECTION('',(1.,0.));-#3819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3820 = ORIENTED_EDGE('',*,*,#3821,.T.);-#3821 = EDGE_CURVE('',#3794,#3822,#3824,.T.);-#3822 = VERTEX_POINT('',#3823);-#3823 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583));-#3824 = SURFACE_CURVE('',#3825,(#3829,#3836),.PCURVE_S1.);-#3825 = LINE('',#3826,#3827);-#3826 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));-#3827 = VECTOR('',#3828,1.);-#3828 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#3829 = PCURVE('',#1578,#3830);-#3830 = DEFINITIONAL_REPRESENTATION('',(#3831),#3835);-#3831 = LINE('',#3832,#3833);-#3832 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#3833 = VECTOR('',#3834,1.);-#3834 = DIRECTION('',(-0.986721169868,-0.162423314012));-#3835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3836 = PCURVE('',#3837,#3842);-#3837 = PLANE('',#3838);-#3838 = AXIS2_PLACEMENT_3D('',#3839,#3840,#3841);-#3839 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));-#3840 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)- );-#3841 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#3842 = DEFINITIONAL_REPRESENTATION('',(#3843),#3847);-#3843 = LINE('',#3844,#3845);-#3844 = CARTESIAN_POINT('',(0.,0.));-#3845 = VECTOR('',#3846,1.);-#3846 = DIRECTION('',(1.,-1.463835121412E-34));-#3847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3848 = ORIENTED_EDGE('',*,*,#3849,.T.);-#3849 = EDGE_CURVE('',#3822,#3850,#3852,.T.);-#3850 = VERTEX_POINT('',#3851);-#3851 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));-#3852 = SURFACE_CURVE('',#3853,(#3858,#3865),.PCURVE_S1.);-#3853 = CIRCLE('',#3854,0.25);-#3854 = AXIS2_PLACEMENT_3D('',#3855,#3856,#3857);-#3855 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));-#3856 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#3857 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#3858 = PCURVE('',#1578,#3859);-#3859 = DEFINITIONAL_REPRESENTATION('',(#3860),#3864);-#3860 = CIRCLE('',#3861,0.25);-#3861 = AXIS2_PLACEMENT_2D('',#3862,#3863);-#3862 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#3863 = DIRECTION('',(-0.173648177667,0.984807753012));-#3864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3865 = PCURVE('',#3866,#3871);-#3866 = CYLINDRICAL_SURFACE('',#3867,0.25);-#3867 = AXIS2_PLACEMENT_3D('',#3868,#3869,#3870);-#3868 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));-#3869 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3870 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#3871 = DEFINITIONAL_REPRESENTATION('',(#3872),#3876);-#3872 = LINE('',#3873,#3874);-#3873 = CARTESIAN_POINT('',(6.28318530718,0.));-#3874 = VECTOR('',#3875,1.);-#3875 = DIRECTION('',(-1.,0.));-#3876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3877 = ORIENTED_EDGE('',*,*,#3878,.T.);-#3878 = EDGE_CURVE('',#3850,#3879,#3881,.T.);-#3879 = VERTEX_POINT('',#3880);-#3880 = CARTESIAN_POINT('',(-1.4,-0.25,0.));-#3881 = SURFACE_CURVE('',#3882,(#3886,#3893),.PCURVE_S1.);-#3882 = LINE('',#3883,#3884);-#3883 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));-#3884 = VECTOR('',#3885,1.);-#3885 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#3886 = PCURVE('',#1578,#3887);-#3887 = DEFINITIONAL_REPRESENTATION('',(#3888),#3892);+#3783 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3784 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#3785 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#3786 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#3787 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#3788 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#3789 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#3790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3791 = PCURVE('',#1663,#3792);+#3792 = DEFINITIONAL_REPRESENTATION('',(#3793),#3797);+#3793 = LINE('',#3794,#3795);+#3794 = CARTESIAN_POINT('',(0.,0.));+#3795 = VECTOR('',#3796,1.);+#3796 = DIRECTION('',(1.,0.));+#3797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3798 = ORIENTED_EDGE('',*,*,#3799,.T.);+#3799 = EDGE_CURVE('',#3772,#3800,#3802,.T.);+#3800 = VERTEX_POINT('',#3801);+#3801 = CARTESIAN_POINT('',(-0.971430759818,-0.175,0.206587955583));+#3802 = SURFACE_CURVE('',#3803,(#3807,#3814),.PCURVE_S1.);+#3803 = LINE('',#3804,#3805);+#3804 = CARTESIAN_POINT('',(-0.948480775301,-0.175,0.367364817767));+#3805 = VECTOR('',#3806,1.);+#3806 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#3807 = PCURVE('',#1556,#3808);+#3808 = DEFINITIONAL_REPRESENTATION('',(#3809),#3813);+#3809 = LINE('',#3810,#3811);+#3810 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#3811 = VECTOR('',#3812,1.);+#3812 = DIRECTION('',(-0.989965123745,-0.14131190243));+#3813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3814 = PCURVE('',#3815,#3820);+#3815 = PLANE('',#3816);+#3816 = AXIS2_PLACEMENT_3D('',#3817,#3818,#3819);+#3817 = CARTESIAN_POINT('',(-0.948480775301,-0.175,0.367364817767));+#3818 = DIRECTION('',(-0.989965123745,1.132755461042E-17,0.14131190243)+ );+#3819 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#3820 = DEFINITIONAL_REPRESENTATION('',(#3821),#3825);+#3821 = LINE('',#3822,#3823);+#3822 = CARTESIAN_POINT('',(0.,-0.));+#3823 = VECTOR('',#3824,1.);+#3824 = DIRECTION('',(1.,9.171740543228E-34));+#3825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3826 = ORIENTED_EDGE('',*,*,#3827,.T.);+#3827 = EDGE_CURVE('',#3800,#3828,#3830,.T.);+#3828 = VERTEX_POINT('',#3829);+#3829 = CARTESIAN_POINT('',(-1.217632698071,-0.175,5.551115123126E-17));+#3830 = SURFACE_CURVE('',#3831,(#3836,#3843),.PCURVE_S1.);+#3831 = CIRCLE('',#3832,0.25);+#3832 = AXIS2_PLACEMENT_3D('',#3833,#3834,#3835);+#3833 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.25));+#3834 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#3835 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#3836 = PCURVE('',#1556,#3837);+#3837 = DEFINITIONAL_REPRESENTATION('',(#3838),#3842);+#3838 = CIRCLE('',#3839,0.25);+#3839 = AXIS2_PLACEMENT_2D('',#3840,#3841);+#3840 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#3841 = DIRECTION('',(-0.173648177667,0.984807753012));+#3842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3843 = PCURVE('',#3844,#3849);+#3844 = CYLINDRICAL_SURFACE('',#3845,0.25);+#3845 = AXIS2_PLACEMENT_3D('',#3846,#3847,#3848);+#3846 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.25));+#3847 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3848 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#3849 = DEFINITIONAL_REPRESENTATION('',(#3850),#3854);+#3850 = LINE('',#3851,#3852);+#3851 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17));+#3852 = VECTOR('',#3853,1.);+#3853 = DIRECTION('',(-1.,1.987846675915E-17));+#3854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3855 = ORIENTED_EDGE('',*,*,#3856,.T.);+#3856 = EDGE_CURVE('',#3828,#3857,#3859,.T.);+#3857 = VERTEX_POINT('',#3858);+#3858 = CARTESIAN_POINT('',(-1.4,-0.175,5.551115123126E-17));+#3859 = SURFACE_CURVE('',#3860,(#3864,#3871),.PCURVE_S1.);+#3860 = LINE('',#3861,#3862);+#3861 = CARTESIAN_POINT('',(-1.217632698071,-0.175,5.551115123126E-17));+#3862 = VECTOR('',#3863,1.);+#3863 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#3864 = PCURVE('',#1556,#3865);+#3865 = DEFINITIONAL_REPRESENTATION('',(#3866),#3870);+#3866 = LINE('',#3867,#3868);+#3867 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#3868 = VECTOR('',#3869,1.);+#3869 = DIRECTION('',(0.,-1.));+#3870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3871 = PCURVE('',#3872,#3877);+#3872 = PLANE('',#3873);+#3873 = AXIS2_PLACEMENT_3D('',#3874,#3875,#3876);+#3874 = CARTESIAN_POINT('',(-1.217632698071,-0.175,5.551115123126E-17));+#3875 = DIRECTION('',(0.,0.,1.));+#3876 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#3877 = DEFINITIONAL_REPRESENTATION('',(#3878),#3882);+#3878 = LINE('',#3879,#3880);+#3879 = CARTESIAN_POINT('',(0.,0.));+#3880 = VECTOR('',#3881,1.);+#3881 = DIRECTION('',(1.,0.));+#3882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3883 = ORIENTED_EDGE('',*,*,#3884,.T.);+#3884 = EDGE_CURVE('',#3857,#3885,#3887,.T.);+#3885 = VERTEX_POINT('',#3886);+#3886 = CARTESIAN_POINT('',(-1.4,-0.175,0.15));+#3887 = SURFACE_CURVE('',#3888,(#3892,#3899),.PCURVE_S1.); #3888 = LINE('',#3889,#3890);-#3889 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));+#3889 = CARTESIAN_POINT('',(-1.4,-0.175,5.551115123126E-17)); #3890 = VECTOR('',#3891,1.);-#3891 = DIRECTION('',(0.,-1.));-#3892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3893 = PCURVE('',#3894,#3899);-#3894 = PLANE('',#3895);-#3895 = AXIS2_PLACEMENT_3D('',#3896,#3897,#3898);-#3896 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));-#3897 = DIRECTION('',(0.,0.,1.));-#3898 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#3899 = DEFINITIONAL_REPRESENTATION('',(#3900),#3904);-#3900 = LINE('',#3901,#3902);-#3901 = CARTESIAN_POINT('',(0.,0.));-#3902 = VECTOR('',#3903,1.);-#3903 = DIRECTION('',(1.,0.));-#3904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3905 = ORIENTED_EDGE('',*,*,#3906,.T.);-#3906 = EDGE_CURVE('',#3879,#3907,#3909,.T.);-#3907 = VERTEX_POINT('',#3908);-#3908 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));-#3909 = SURFACE_CURVE('',#3910,(#3914,#3921),.PCURVE_S1.);-#3910 = LINE('',#3911,#3912);-#3911 = CARTESIAN_POINT('',(-1.4,-0.25,0.));-#3912 = VECTOR('',#3913,1.);-#3913 = DIRECTION('',(0.,0.,1.));-#3914 = PCURVE('',#1578,#3915);-#3915 = DEFINITIONAL_REPRESENTATION('',(#3916),#3920);+#3891 = DIRECTION('',(0.,0.,1.));+#3892 = PCURVE('',#1556,#3893);+#3893 = DEFINITIONAL_REPRESENTATION('',(#3894),#3898);+#3894 = LINE('',#3895,#3896);+#3895 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#3896 = VECTOR('',#3897,1.);+#3897 = DIRECTION('',(1.,0.));+#3898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3899 = PCURVE('',#3900,#3905);+#3900 = PLANE('',#3901);+#3901 = AXIS2_PLACEMENT_3D('',#3902,#3903,#3904);+#3902 = CARTESIAN_POINT('',(-1.4,-0.175,5.551115123126E-17));+#3903 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3904 = DIRECTION('',(0.,0.,1.));+#3905 = DEFINITIONAL_REPRESENTATION('',(#3906),#3910);+#3906 = LINE('',#3907,#3908);+#3907 = CARTESIAN_POINT('',(0.,0.));+#3908 = VECTOR('',#3909,1.);+#3909 = DIRECTION('',(1.,0.));+#3910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3911 = ORIENTED_EDGE('',*,*,#3912,.T.);+#3912 = EDGE_CURVE('',#3885,#3913,#3915,.T.);+#3913 = VERTEX_POINT('',#3914);+#3914 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.15));+#3915 = SURFACE_CURVE('',#3916,(#3920,#3927),.PCURVE_S1.); #3916 = LINE('',#3917,#3918);-#3917 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));+#3917 = CARTESIAN_POINT('',(-1.4,-0.175,0.15)); #3918 = VECTOR('',#3919,1.);-#3919 = DIRECTION('',(1.,0.));-#3920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3921 = PCURVE('',#3922,#3927);-#3922 = PLANE('',#3923);-#3923 = AXIS2_PLACEMENT_3D('',#3924,#3925,#3926);-#3924 = CARTESIAN_POINT('',(-1.4,-0.25,0.));-#3925 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3926 = DIRECTION('',(0.,0.,1.));-#3927 = DEFINITIONAL_REPRESENTATION('',(#3928),#3932);-#3928 = LINE('',#3929,#3930);-#3929 = CARTESIAN_POINT('',(0.,0.));-#3930 = VECTOR('',#3931,1.);-#3931 = DIRECTION('',(1.,0.));-#3932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3933 = ORIENTED_EDGE('',*,*,#3934,.T.);-#3934 = EDGE_CURVE('',#3907,#3935,#3937,.T.);-#3935 = VERTEX_POINT('',#3936);-#3936 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15));-#3937 = SURFACE_CURVE('',#3938,(#3942,#3949),.PCURVE_S1.);-#3938 = LINE('',#3939,#3940);-#3939 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));-#3940 = VECTOR('',#3941,1.);-#3941 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3942 = PCURVE('',#1578,#3943);-#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3948);-#3944 = LINE('',#3945,#3946);-#3945 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#3946 = VECTOR('',#3947,1.);-#3947 = DIRECTION('',(0.,1.));-#3948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3949 = PCURVE('',#3950,#3955);-#3950 = PLANE('',#3951);-#3951 = AXIS2_PLACEMENT_3D('',#3952,#3953,#3954);-#3952 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));-#3953 = DIRECTION('',(0.,0.,-1.));-#3954 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#3955 = DEFINITIONAL_REPRESENTATION('',(#3956),#3960);-#3956 = LINE('',#3957,#3958);-#3957 = CARTESIAN_POINT('',(0.,-0.));-#3958 = VECTOR('',#3959,1.);-#3959 = DIRECTION('',(1.,0.));-#3960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3961 = ORIENTED_EDGE('',*,*,#3962,.T.);-#3962 = EDGE_CURVE('',#3935,#3963,#3965,.T.);-#3963 = VERTEX_POINT('',#3964);-#3964 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));-#3965 = SURFACE_CURVE('',#3966,(#3971,#3982),.PCURVE_S1.);-#3966 = CIRCLE('',#3967,0.1);-#3967 = AXIS2_PLACEMENT_3D('',#3968,#3969,#3970);-#3968 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));-#3969 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3970 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#3971 = PCURVE('',#1578,#3972);-#3972 = DEFINITIONAL_REPRESENTATION('',(#3973),#3981);-#3973 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3974,#3975,#3976,#3977,-#3978,#3979,#3980),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3919 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3920 = PCURVE('',#1556,#3921);+#3921 = DEFINITIONAL_REPRESENTATION('',(#3922),#3926);+#3922 = LINE('',#3923,#3924);+#3923 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#3924 = VECTOR('',#3925,1.);+#3925 = DIRECTION('',(0.,1.));+#3926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3927 = PCURVE('',#3928,#3933);+#3928 = PLANE('',#3929);+#3929 = AXIS2_PLACEMENT_3D('',#3930,#3931,#3932);+#3930 = CARTESIAN_POINT('',(-1.4,-0.175,0.15));+#3931 = DIRECTION('',(0.,0.,-1.));+#3932 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#3933 = DEFINITIONAL_REPRESENTATION('',(#3934),#3938);+#3934 = LINE('',#3935,#3936);+#3935 = CARTESIAN_POINT('',(0.,-0.));+#3936 = VECTOR('',#3937,1.);+#3937 = DIRECTION('',(1.,0.));+#3938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3939 = ORIENTED_EDGE('',*,*,#3940,.T.);+#3940 = EDGE_CURVE('',#3913,#3941,#3943,.T.);+#3941 = VERTEX_POINT('',#3942);+#3942 = CARTESIAN_POINT('',(-1.11915192277,-0.175,0.232635182233));+#3943 = SURFACE_CURVE('',#3944,(#3949,#3960),.PCURVE_S1.);+#3944 = CIRCLE('',#3945,0.1);+#3945 = AXIS2_PLACEMENT_3D('',#3946,#3947,#3948);+#3946 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.25));+#3947 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#3948 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#3949 = PCURVE('',#1556,#3950);+#3950 = DEFINITIONAL_REPRESENTATION('',(#3951),#3959);+#3951 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3952,#3953,#3954,#3955,+#3956,#3957,#3958),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#3974 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3975 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#3976 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#3977 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#3978 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#3979 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#3980 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#3981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3982 = PCURVE('',#3983,#3988);-#3983 = CYLINDRICAL_SURFACE('',#3984,0.1);-#3984 = AXIS2_PLACEMENT_3D('',#3985,#3986,#3987);-#3985 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25));-#3986 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#3987 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#3988 = DEFINITIONAL_REPRESENTATION('',(#3989),#3993);-#3989 = LINE('',#3990,#3991);-#3990 = CARTESIAN_POINT('',(0.,0.));-#3991 = VECTOR('',#3992,1.);-#3992 = DIRECTION('',(1.,0.));-#3993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#3994 = ORIENTED_EDGE('',*,*,#3995,.T.);-#3995 = EDGE_CURVE('',#3963,#3996,#3998,.T.);-#3996 = VERTEX_POINT('',#3997);-#3997 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417));-#3998 = SURFACE_CURVE('',#3999,(#4003,#4010),.PCURVE_S1.);-#3999 = LINE('',#4000,#4001);-#4000 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));-#4001 = VECTOR('',#4002,1.);-#4002 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#4003 = PCURVE('',#1578,#4004);-#4004 = DEFINITIONAL_REPRESENTATION('',(#4005),#4009);-#4005 = LINE('',#4006,#4007);-#4006 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#4007 = VECTOR('',#4008,1.);-#4008 = DIRECTION('',(0.986721169868,0.162423314012));-#4009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4010 = PCURVE('',#4011,#4016);-#4011 = PLANE('',#4012);-#4012 = AXIS2_PLACEMENT_3D('',#4013,#4014,#4015);-#4013 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));-#4014 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012- ));-#4015 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#4016 = DEFINITIONAL_REPRESENTATION('',(#4017),#4021);-#4017 = LINE('',#4018,#4019);-#4018 = CARTESIAN_POINT('',(0.,0.));-#4019 = VECTOR('',#4020,1.);-#4020 = DIRECTION('',(1.,1.463835121412E-34));-#4021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4022 = ORIENTED_EDGE('',*,*,#4023,.T.);-#4023 = EDGE_CURVE('',#3996,#4024,#4026,.T.);-#4024 = VERTEX_POINT('',#4025);-#4025 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));-#4026 = SURFACE_CURVE('',#4027,(#4032,#4039),.PCURVE_S1.);-#4027 = CIRCLE('',#4028,0.25);-#4028 = AXIS2_PLACEMENT_3D('',#4029,#4030,#4031);-#4029 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));-#4030 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#4031 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#4032 = PCURVE('',#1578,#4033);-#4033 = DEFINITIONAL_REPRESENTATION('',(#4034),#4038);-#4034 = CIRCLE('',#4035,0.25);-#4035 = AXIS2_PLACEMENT_2D('',#4036,#4037);-#4036 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#4037 = DIRECTION('',(0.173648177667,-0.984807753012));-#4038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4039 = PCURVE('',#4040,#4045);-#4040 = CYLINDRICAL_SURFACE('',#4041,0.25);-#4041 = AXIS2_PLACEMENT_3D('',#4042,#4043,#4044);-#4042 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));-#4043 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4044 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#4045 = DEFINITIONAL_REPRESENTATION('',(#4046),#4050);-#4046 = LINE('',#4047,#4048);-#4047 = CARTESIAN_POINT('',(6.28318530718,0.));-#4048 = VECTOR('',#4049,1.);-#4049 = DIRECTION('',(-1.,0.));-#4050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4051 = ORIENTED_EDGE('',*,*,#4052,.T.);-#4052 = EDGE_CURVE('',#4024,#1563,#4053,.T.);-#4053 = SURFACE_CURVE('',#4054,(#4058,#4065),.PCURVE_S1.);-#4054 = LINE('',#4055,#4056);-#4055 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));-#4056 = VECTOR('',#4057,1.);-#4057 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4058 = PCURVE('',#1578,#4059);-#4059 = DEFINITIONAL_REPRESENTATION('',(#4060),#4064);-#4060 = LINE('',#4061,#4062);-#4061 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#4062 = VECTOR('',#4063,1.);-#4063 = DIRECTION('',(0.,1.));-#4064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4065 = PCURVE('',#2563,#4066);-#4066 = DEFINITIONAL_REPRESENTATION('',(#4067),#4071);-#4067 = LINE('',#4068,#4069);-#4068 = CARTESIAN_POINT('',(0.,-0.));-#4069 = VECTOR('',#4070,1.);-#4070 = DIRECTION('',(1.,0.));-#4071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4072 = ADVANCED_FACE('',(#4073),#1685,.F.);-#4073 = FACE_BOUND('',#4074,.F.);-#4074 = EDGE_LOOP('',(#4075,#4076,#4104,#4125));-#4075 = ORIENTED_EDGE('',*,*,#1671,.T.);-#4076 = ORIENTED_EDGE('',*,*,#4077,.T.);-#4077 = EDGE_CURVE('',#1644,#4078,#4080,.T.);-#4078 = VERTEX_POINT('',#4079);-#4079 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767));-#4080 = SURFACE_CURVE('',#4081,(#4086,#4093),.PCURVE_S1.);-#4081 = CIRCLE('',#4082,0.1);-#4082 = AXIS2_PLACEMENT_3D('',#4083,#4084,#4085);-#4083 = CARTESIAN_POINT('',(-0.85,0.25,0.65));-#4084 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4085 = DIRECTION('',(0.,0.,1.));-#4086 = PCURVE('',#1685,#4087);-#4087 = DEFINITIONAL_REPRESENTATION('',(#4088),#4092);-#4088 = LINE('',#4089,#4090);-#4089 = CARTESIAN_POINT('',(0.,-0.5));-#4090 = VECTOR('',#4091,1.);-#4091 = DIRECTION('',(1.,0.));-#4092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4093 = PCURVE('',#1659,#4094);-#4094 = DEFINITIONAL_REPRESENTATION('',(#4095),#4103);-#4095 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4096,#4097,#4098,#4099,-#4100,#4101,#4102),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#3952 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3953 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#3954 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#3955 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#3956 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#3957 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#3958 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#3959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3960 = PCURVE('',#3961,#3966);+#3961 = CYLINDRICAL_SURFACE('',#3962,0.1);+#3962 = AXIS2_PLACEMENT_3D('',#3963,#3964,#3965);+#3963 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.25));+#3964 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3965 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#3966 = DEFINITIONAL_REPRESENTATION('',(#3967),#3971);+#3967 = LINE('',#3968,#3969);+#3968 = CARTESIAN_POINT('',(0.,0.));+#3969 = VECTOR('',#3970,1.);+#3970 = DIRECTION('',(1.,-1.98784667592E-17));+#3971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3972 = ORIENTED_EDGE('',*,*,#3973,.T.);+#3973 = EDGE_CURVE('',#3941,#3974,#3976,.T.);+#3974 = VERTEX_POINT('',#3975);+#3975 = CARTESIAN_POINT('',(-1.096201938253,-0.175,0.393412044417));+#3976 = SURFACE_CURVE('',#3977,(#3981,#3988),.PCURVE_S1.);+#3977 = LINE('',#3978,#3979);+#3978 = CARTESIAN_POINT('',(-1.11915192277,-0.175,0.232635182233));+#3979 = VECTOR('',#3980,1.);+#3980 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#3981 = PCURVE('',#1556,#3982);+#3982 = DEFINITIONAL_REPRESENTATION('',(#3983),#3987);+#3983 = LINE('',#3984,#3985);+#3984 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#3985 = VECTOR('',#3986,1.);+#3986 = DIRECTION('',(0.989965123745,0.14131190243));+#3987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3988 = PCURVE('',#3989,#3994);+#3989 = PLANE('',#3990);+#3990 = AXIS2_PLACEMENT_3D('',#3991,#3992,#3993);+#3991 = CARTESIAN_POINT('',(-1.11915192277,-0.175,0.232635182233));+#3992 = DIRECTION('',(0.989965123745,-1.132755461042E-17,-0.14131190243)+ );+#3993 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#3994 = DEFINITIONAL_REPRESENTATION('',(#3995),#3999);+#3995 = LINE('',#3996,#3997);+#3996 = CARTESIAN_POINT('',(0.,-0.));+#3997 = VECTOR('',#3998,1.);+#3998 = DIRECTION('',(1.,-9.171740543228E-34));+#3999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4000 = ORIENTED_EDGE('',*,*,#4001,.T.);+#4001 = EDGE_CURVE('',#3974,#4002,#4004,.T.);+#4002 = VERTEX_POINT('',#4003);+#4003 = CARTESIAN_POINT('',(-0.85,-0.175,0.6));+#4004 = SURFACE_CURVE('',#4005,(#4010,#4017),.PCURVE_S1.);+#4005 = CIRCLE('',#4006,0.25);+#4006 = AXIS2_PLACEMENT_3D('',#4007,#4008,#4009);+#4007 = CARTESIAN_POINT('',(-0.85,-0.175,0.35));+#4008 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4009 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4010 = PCURVE('',#1556,#4011);+#4011 = DEFINITIONAL_REPRESENTATION('',(#4012),#4016);+#4012 = CIRCLE('',#4013,0.25);+#4013 = AXIS2_PLACEMENT_2D('',#4014,#4015);+#4014 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#4015 = DIRECTION('',(0.173648177667,-0.984807753012));+#4016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4017 = PCURVE('',#4018,#4023);+#4018 = CYLINDRICAL_SURFACE('',#4019,0.25);+#4019 = AXIS2_PLACEMENT_3D('',#4020,#4021,#4022);+#4020 = CARTESIAN_POINT('',(-0.85,-0.175,0.35));+#4021 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4022 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4023 = DEFINITIONAL_REPRESENTATION('',(#4024),#4028);+#4024 = LINE('',#4025,#4026);+#4025 = CARTESIAN_POINT('',(6.28318530718,0.));+#4026 = VECTOR('',#4027,1.);+#4027 = DIRECTION('',(-1.,0.));+#4028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4029 = ORIENTED_EDGE('',*,*,#4030,.T.);+#4030 = EDGE_CURVE('',#4002,#1541,#4031,.T.);+#4031 = SURFACE_CURVE('',#4032,(#4036,#4043),.PCURVE_S1.);+#4032 = LINE('',#4033,#4034);+#4033 = CARTESIAN_POINT('',(-0.85,-0.175,0.6));+#4034 = VECTOR('',#4035,1.);+#4035 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4036 = PCURVE('',#1556,#4037);+#4037 = DEFINITIONAL_REPRESENTATION('',(#4038),#4042);+#4038 = LINE('',#4039,#4040);+#4039 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#4040 = VECTOR('',#4041,1.);+#4041 = DIRECTION('',(0.,1.));+#4042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4043 = PCURVE('',#2541,#4044);+#4044 = DEFINITIONAL_REPRESENTATION('',(#4045),#4049);+#4045 = LINE('',#4046,#4047);+#4046 = CARTESIAN_POINT('',(0.,-0.));+#4047 = VECTOR('',#4048,1.);+#4048 = DIRECTION('',(1.,0.));+#4049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4050 = ADVANCED_FACE('',(#4051),#1663,.F.);+#4051 = FACE_BOUND('',#4052,.F.);+#4052 = EDGE_LOOP('',(#4053,#4054,#4082,#4103));+#4053 = ORIENTED_EDGE('',*,*,#1649,.T.);+#4054 = ORIENTED_EDGE('',*,*,#4055,.T.);+#4055 = EDGE_CURVE('',#1622,#4056,#4058,.T.);+#4056 = VERTEX_POINT('',#4057);+#4057 = CARTESIAN_POINT('',(-0.948480775301,0.175,0.367364817767));+#4058 = SURFACE_CURVE('',#4059,(#4064,#4071),.PCURVE_S1.);+#4059 = CIRCLE('',#4060,0.1);+#4060 = AXIS2_PLACEMENT_3D('',#4061,#4062,#4063);+#4061 = CARTESIAN_POINT('',(-0.85,0.175,0.35));+#4062 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4063 = DIRECTION('',(0.,0.,1.));+#4064 = PCURVE('',#1663,#4065);+#4065 = DEFINITIONAL_REPRESENTATION('',(#4066),#4070);+#4066 = LINE('',#4067,#4068);+#4067 = CARTESIAN_POINT('',(0.,-0.35));+#4068 = VECTOR('',#4069,1.);+#4069 = DIRECTION('',(1.,0.));+#4070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4071 = PCURVE('',#1637,#4072);+#4072 = DEFINITIONAL_REPRESENTATION('',(#4073),#4081);+#4073 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4074,#4075,#4076,#4077,+#4078,#4079,#4080),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4096 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4097 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#4098 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#4099 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#4100 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#4101 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#4102 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4104 = ORIENTED_EDGE('',*,*,#4105,.F.);-#4105 = EDGE_CURVE('',#3794,#4078,#4106,.T.);-#4106 = SURFACE_CURVE('',#4107,(#4111,#4118),.PCURVE_S1.);-#4107 = LINE('',#4108,#4109);-#4108 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767));-#4109 = VECTOR('',#4110,1.);-#4110 = DIRECTION('',(1.144237745222E-17,1.,0.));-#4111 = PCURVE('',#1685,#4112);-#4112 = DEFINITIONAL_REPRESENTATION('',(#4113),#4117);-#4113 = LINE('',#4114,#4115);-#4114 = CARTESIAN_POINT('',(1.396263401592,0.));-#4115 = VECTOR('',#4116,1.);-#4116 = DIRECTION('',(0.,-1.));-#4117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4118 = PCURVE('',#3837,#4119);-#4119 = DEFINITIONAL_REPRESENTATION('',(#4120),#4124);-#4120 = LINE('',#4121,#4122);-#4121 = CARTESIAN_POINT('',(0.,0.));-#4122 = VECTOR('',#4123,1.);-#4123 = DIRECTION('',(-1.7573160551E-30,-1.));-#4124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4125 = ORIENTED_EDGE('',*,*,#3793,.F.);-#4126 = ADVANCED_FACE('',(#4127),#1659,.T.);-#4127 = FACE_BOUND('',#4128,.T.);-#4128 = EDGE_LOOP('',(#4129,#4130,#4131,#4132,#4155,#4179,#4202,#4225,- #4248,#4276,#4299,#4323));-#4129 = ORIENTED_EDGE('',*,*,#1700,.F.);-#4130 = ORIENTED_EDGE('',*,*,#1643,.T.);-#4131 = ORIENTED_EDGE('',*,*,#4077,.T.);-#4132 = ORIENTED_EDGE('',*,*,#4133,.T.);-#4133 = EDGE_CURVE('',#4078,#4134,#4136,.T.);-#4134 = VERTEX_POINT('',#4135);-#4135 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583));-#4136 = SURFACE_CURVE('',#4137,(#4141,#4148),.PCURVE_S1.);-#4137 = LINE('',#4138,#4139);-#4138 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767));-#4139 = VECTOR('',#4140,1.);-#4140 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#4141 = PCURVE('',#1659,#4142);-#4142 = DEFINITIONAL_REPRESENTATION('',(#4143),#4147);-#4143 = LINE('',#4144,#4145);-#4144 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#4145 = VECTOR('',#4146,1.);-#4146 = DIRECTION('',(-0.986721169868,-0.162423314012));-#4147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4148 = PCURVE('',#3837,#4149);-#4149 = DEFINITIONAL_REPRESENTATION('',(#4150),#4154);-#4150 = LINE('',#4151,#4152);-#4151 = CARTESIAN_POINT('',(9.292544329819E-19,-0.5));-#4152 = VECTOR('',#4153,1.);-#4153 = DIRECTION('',(1.,-1.463835121412E-34));-#4154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4155 = ORIENTED_EDGE('',*,*,#4156,.T.);-#4156 = EDGE_CURVE('',#4134,#4157,#4159,.T.);-#4157 = VERTEX_POINT('',#4158);-#4158 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.));-#4159 = SURFACE_CURVE('',#4160,(#4165,#4172),.PCURVE_S1.);-#4160 = CIRCLE('',#4161,0.25);-#4161 = AXIS2_PLACEMENT_3D('',#4162,#4163,#4164);-#4162 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25));-#4163 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#4164 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#4165 = PCURVE('',#1659,#4166);-#4166 = DEFINITIONAL_REPRESENTATION('',(#4167),#4171);-#4167 = CIRCLE('',#4168,0.25);-#4168 = AXIS2_PLACEMENT_2D('',#4169,#4170);-#4169 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#4170 = DIRECTION('',(-0.173648177667,0.984807753012));-#4171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4172 = PCURVE('',#3866,#4173);-#4173 = DEFINITIONAL_REPRESENTATION('',(#4174),#4178);-#4174 = LINE('',#4175,#4176);-#4175 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#4176 = VECTOR('',#4177,1.);-#4177 = DIRECTION('',(-1.,0.));-#4178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4179 = ORIENTED_EDGE('',*,*,#4180,.T.);-#4180 = EDGE_CURVE('',#4157,#4181,#4183,.T.);-#4181 = VERTEX_POINT('',#4182);-#4182 = CARTESIAN_POINT('',(-1.4,0.25,0.));-#4183 = SURFACE_CURVE('',#4184,(#4188,#4195),.PCURVE_S1.);-#4184 = LINE('',#4185,#4186);-#4185 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.));-#4186 = VECTOR('',#4187,1.);-#4187 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#4188 = PCURVE('',#1659,#4189);-#4189 = DEFINITIONAL_REPRESENTATION('',(#4190),#4194);-#4190 = LINE('',#4191,#4192);-#4191 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));-#4192 = VECTOR('',#4193,1.);-#4193 = DIRECTION('',(0.,-1.));-#4194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4195 = PCURVE('',#3894,#4196);-#4196 = DEFINITIONAL_REPRESENTATION('',(#4197),#4201);-#4197 = LINE('',#4198,#4199);-#4198 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#4199 = VECTOR('',#4200,1.);-#4200 = DIRECTION('',(1.,0.));-#4201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4202 = ORIENTED_EDGE('',*,*,#4203,.T.);-#4203 = EDGE_CURVE('',#4181,#4204,#4206,.T.);-#4204 = VERTEX_POINT('',#4205);-#4205 = CARTESIAN_POINT('',(-1.4,0.25,0.15));-#4206 = SURFACE_CURVE('',#4207,(#4211,#4218),.PCURVE_S1.);-#4207 = LINE('',#4208,#4209);-#4208 = CARTESIAN_POINT('',(-1.4,0.25,0.));-#4209 = VECTOR('',#4210,1.);-#4210 = DIRECTION('',(0.,0.,1.));-#4211 = PCURVE('',#1659,#4212);-#4212 = DEFINITIONAL_REPRESENTATION('',(#4213),#4217);-#4213 = LINE('',#4214,#4215);-#4214 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));-#4215 = VECTOR('',#4216,1.);-#4216 = DIRECTION('',(1.,0.));-#4217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4218 = PCURVE('',#3922,#4219);-#4219 = DEFINITIONAL_REPRESENTATION('',(#4220),#4224);-#4220 = LINE('',#4221,#4222);-#4221 = CARTESIAN_POINT('',(0.,-0.5));-#4222 = VECTOR('',#4223,1.);-#4223 = DIRECTION('',(1.,0.));-#4224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4225 = ORIENTED_EDGE('',*,*,#4226,.T.);-#4226 = EDGE_CURVE('',#4204,#4227,#4229,.T.);-#4227 = VERTEX_POINT('',#4228);-#4228 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15));-#4229 = SURFACE_CURVE('',#4230,(#4234,#4241),.PCURVE_S1.);-#4230 = LINE('',#4231,#4232);-#4231 = CARTESIAN_POINT('',(-1.4,0.25,0.15));-#4232 = VECTOR('',#4233,1.);-#4233 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4234 = PCURVE('',#1659,#4235);-#4235 = DEFINITIONAL_REPRESENTATION('',(#4236),#4240);-#4236 = LINE('',#4237,#4238);-#4237 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#4238 = VECTOR('',#4239,1.);-#4239 = DIRECTION('',(0.,1.));-#4240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4241 = PCURVE('',#3950,#4242);-#4242 = DEFINITIONAL_REPRESENTATION('',(#4243),#4247);-#4243 = LINE('',#4244,#4245);-#4244 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#4245 = VECTOR('',#4246,1.);-#4246 = DIRECTION('',(1.,0.));-#4247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4248 = ORIENTED_EDGE('',*,*,#4249,.T.);-#4249 = EDGE_CURVE('',#4227,#4250,#4252,.T.);-#4250 = VERTEX_POINT('',#4251);-#4251 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233));-#4252 = SURFACE_CURVE('',#4253,(#4258,#4269),.PCURVE_S1.);-#4253 = CIRCLE('',#4254,0.1);-#4254 = AXIS2_PLACEMENT_3D('',#4255,#4256,#4257);-#4255 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25));-#4256 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4257 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#4258 = PCURVE('',#1659,#4259);-#4259 = DEFINITIONAL_REPRESENTATION('',(#4260),#4268);-#4260 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4261,#4262,#4263,#4264,-#4265,#4266,#4267),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4074 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4075 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#4076 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#4077 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#4078 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#4079 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#4080 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4082 = ORIENTED_EDGE('',*,*,#4083,.F.);+#4083 = EDGE_CURVE('',#3772,#4056,#4084,.T.);+#4084 = SURFACE_CURVE('',#4085,(#4089,#4096),.PCURVE_S1.);+#4085 = LINE('',#4086,#4087);+#4086 = CARTESIAN_POINT('',(-0.948480775301,-0.175,0.367364817767));+#4087 = VECTOR('',#4088,1.);+#4088 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4089 = PCURVE('',#1663,#4090);+#4090 = DEFINITIONAL_REPRESENTATION('',(#4091),#4095);+#4091 = LINE('',#4092,#4093);+#4092 = CARTESIAN_POINT('',(1.396263401592,0.));+#4093 = VECTOR('',#4094,1.);+#4094 = DIRECTION('',(0.,-1.));+#4095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4096 = PCURVE('',#3815,#4097);+#4097 = DEFINITIONAL_REPRESENTATION('',(#4098),#4102);+#4098 = LINE('',#4099,#4100);+#4099 = CARTESIAN_POINT('',(0.,-0.));+#4100 = VECTOR('',#4101,1.);+#4101 = DIRECTION('',(2.656255567127E-30,-1.));+#4102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4103 = ORIENTED_EDGE('',*,*,#3771,.F.);+#4104 = ADVANCED_FACE('',(#4105),#1637,.T.);+#4105 = FACE_BOUND('',#4106,.T.);+#4106 = EDGE_LOOP('',(#4107,#4108,#4109,#4110,#4133,#4157,#4180,#4203,+ #4226,#4254,#4277,#4301));+#4107 = ORIENTED_EDGE('',*,*,#1678,.F.);+#4108 = ORIENTED_EDGE('',*,*,#1621,.T.);+#4109 = ORIENTED_EDGE('',*,*,#4055,.T.);+#4110 = ORIENTED_EDGE('',*,*,#4111,.T.);+#4111 = EDGE_CURVE('',#4056,#4112,#4114,.T.);+#4112 = VERTEX_POINT('',#4113);+#4113 = CARTESIAN_POINT('',(-0.971430759818,0.175,0.206587955583));+#4114 = SURFACE_CURVE('',#4115,(#4119,#4126),.PCURVE_S1.);+#4115 = LINE('',#4116,#4117);+#4116 = CARTESIAN_POINT('',(-0.948480775301,0.175,0.367364817767));+#4117 = VECTOR('',#4118,1.);+#4118 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#4119 = PCURVE('',#1637,#4120);+#4120 = DEFINITIONAL_REPRESENTATION('',(#4121),#4125);+#4121 = LINE('',#4122,#4123);+#4122 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#4123 = VECTOR('',#4124,1.);+#4124 = DIRECTION('',(-0.989965123745,-0.14131190243));+#4125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4126 = PCURVE('',#3815,#4127);+#4127 = DEFINITIONAL_REPRESENTATION('',(#4128),#4132);+#4128 = LINE('',#4129,#4130);+#4129 = CARTESIAN_POINT('',(5.659304441343E-19,-0.35));+#4130 = VECTOR('',#4131,1.);+#4131 = DIRECTION('',(1.,9.171740543228E-34));+#4132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4133 = ORIENTED_EDGE('',*,*,#4134,.T.);+#4134 = EDGE_CURVE('',#4112,#4135,#4137,.T.);+#4135 = VERTEX_POINT('',#4136);+#4136 = CARTESIAN_POINT('',(-1.217632698071,0.175,5.551115123126E-17));+#4137 = SURFACE_CURVE('',#4138,(#4143,#4150),.PCURVE_S1.);+#4138 = CIRCLE('',#4139,0.25);+#4139 = AXIS2_PLACEMENT_3D('',#4140,#4141,#4142);+#4140 = CARTESIAN_POINT('',(-1.217632698071,0.175,0.25));+#4141 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#4142 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#4143 = PCURVE('',#1637,#4144);+#4144 = DEFINITIONAL_REPRESENTATION('',(#4145),#4149);+#4145 = CIRCLE('',#4146,0.25);+#4146 = AXIS2_PLACEMENT_2D('',#4147,#4148);+#4147 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#4148 = DIRECTION('',(-0.173648177667,0.984807753012));+#4149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4150 = PCURVE('',#3844,#4151);+#4151 = DEFINITIONAL_REPRESENTATION('',(#4152),#4156);+#4152 = LINE('',#4153,#4154);+#4153 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#4154 = VECTOR('',#4155,1.);+#4155 = DIRECTION('',(-1.,0.));+#4156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4157 = ORIENTED_EDGE('',*,*,#4158,.T.);+#4158 = EDGE_CURVE('',#4135,#4159,#4161,.T.);+#4159 = VERTEX_POINT('',#4160);+#4160 = CARTESIAN_POINT('',(-1.4,0.175,5.551115123126E-17));+#4161 = SURFACE_CURVE('',#4162,(#4166,#4173),.PCURVE_S1.);+#4162 = LINE('',#4163,#4164);+#4163 = CARTESIAN_POINT('',(-1.217632698071,0.175,5.551115123126E-17));+#4164 = VECTOR('',#4165,1.);+#4165 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#4166 = PCURVE('',#1637,#4167);+#4167 = DEFINITIONAL_REPRESENTATION('',(#4168),#4172);+#4168 = LINE('',#4169,#4170);+#4169 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#4170 = VECTOR('',#4171,1.);+#4171 = DIRECTION('',(0.,-1.));+#4172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4173 = PCURVE('',#3872,#4174);+#4174 = DEFINITIONAL_REPRESENTATION('',(#4175),#4179);+#4175 = LINE('',#4176,#4177);+#4176 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#4177 = VECTOR('',#4178,1.);+#4178 = DIRECTION('',(1.,0.));+#4179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4180 = ORIENTED_EDGE('',*,*,#4181,.T.);+#4181 = EDGE_CURVE('',#4159,#4182,#4184,.T.);+#4182 = VERTEX_POINT('',#4183);+#4183 = CARTESIAN_POINT('',(-1.4,0.175,0.15));+#4184 = SURFACE_CURVE('',#4185,(#4189,#4196),.PCURVE_S1.);+#4185 = LINE('',#4186,#4187);+#4186 = CARTESIAN_POINT('',(-1.4,0.175,5.551115123126E-17));+#4187 = VECTOR('',#4188,1.);+#4188 = DIRECTION('',(0.,0.,1.));+#4189 = PCURVE('',#1637,#4190);+#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4195);+#4191 = LINE('',#4192,#4193);+#4192 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#4193 = VECTOR('',#4194,1.);+#4194 = DIRECTION('',(1.,0.));+#4195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4196 = PCURVE('',#3900,#4197);+#4197 = DEFINITIONAL_REPRESENTATION('',(#4198),#4202);+#4198 = LINE('',#4199,#4200);+#4199 = CARTESIAN_POINT('',(0.,-0.35));+#4200 = VECTOR('',#4201,1.);+#4201 = DIRECTION('',(1.,0.));+#4202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4203 = ORIENTED_EDGE('',*,*,#4204,.T.);+#4204 = EDGE_CURVE('',#4182,#4205,#4207,.T.);+#4205 = VERTEX_POINT('',#4206);+#4206 = CARTESIAN_POINT('',(-1.217632698071,0.175,0.15));+#4207 = SURFACE_CURVE('',#4208,(#4212,#4219),.PCURVE_S1.);+#4208 = LINE('',#4209,#4210);+#4209 = CARTESIAN_POINT('',(-1.4,0.175,0.15));+#4210 = VECTOR('',#4211,1.);+#4211 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4212 = PCURVE('',#1637,#4213);+#4213 = DEFINITIONAL_REPRESENTATION('',(#4214),#4218);+#4214 = LINE('',#4215,#4216);+#4215 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#4216 = VECTOR('',#4217,1.);+#4217 = DIRECTION('',(0.,1.));+#4218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4219 = PCURVE('',#3928,#4220);+#4220 = DEFINITIONAL_REPRESENTATION('',(#4221),#4225);+#4221 = LINE('',#4222,#4223);+#4222 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#4223 = VECTOR('',#4224,1.);+#4224 = DIRECTION('',(1.,0.));+#4225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4226 = ORIENTED_EDGE('',*,*,#4227,.T.);+#4227 = EDGE_CURVE('',#4205,#4228,#4230,.T.);+#4228 = VERTEX_POINT('',#4229);+#4229 = CARTESIAN_POINT('',(-1.11915192277,0.175,0.232635182233));+#4230 = SURFACE_CURVE('',#4231,(#4236,#4247),.PCURVE_S1.);+#4231 = CIRCLE('',#4232,0.1);+#4232 = AXIS2_PLACEMENT_3D('',#4233,#4234,#4235);+#4233 = CARTESIAN_POINT('',(-1.217632698071,0.175,0.25));+#4234 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#4235 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#4236 = PCURVE('',#1637,#4237);+#4237 = DEFINITIONAL_REPRESENTATION('',(#4238),#4246);+#4238 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4239,#4240,#4241,#4242,+#4243,#4244,#4245),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4261 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4262 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#4263 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#4264 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#4265 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#4266 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#4267 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4269 = PCURVE('',#3983,#4270);-#4270 = DEFINITIONAL_REPRESENTATION('',(#4271),#4275);-#4271 = LINE('',#4272,#4273);-#4272 = CARTESIAN_POINT('',(0.,-0.5));-#4273 = VECTOR('',#4274,1.);-#4274 = DIRECTION('',(1.,0.));-#4275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4276 = ORIENTED_EDGE('',*,*,#4277,.T.);-#4277 = EDGE_CURVE('',#4250,#4278,#4280,.T.);-#4278 = VERTEX_POINT('',#4279);-#4279 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417));-#4280 = SURFACE_CURVE('',#4281,(#4285,#4292),.PCURVE_S1.);-#4281 = LINE('',#4282,#4283);-#4282 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233));-#4283 = VECTOR('',#4284,1.);-#4284 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#4285 = PCURVE('',#1659,#4286);-#4286 = DEFINITIONAL_REPRESENTATION('',(#4287),#4291);-#4287 = LINE('',#4288,#4289);-#4288 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#4289 = VECTOR('',#4290,1.);-#4290 = DIRECTION('',(0.986721169868,0.162423314012));-#4291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4292 = PCURVE('',#4011,#4293);-#4293 = DEFINITIONAL_REPRESENTATION('',(#4294),#4298);-#4294 = LINE('',#4295,#4296);-#4295 = CARTESIAN_POINT('',(-9.292544329819E-19,-0.5));-#4296 = VECTOR('',#4297,1.);-#4297 = DIRECTION('',(1.,1.463835121412E-34));-#4298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4299 = ORIENTED_EDGE('',*,*,#4300,.T.);-#4300 = EDGE_CURVE('',#4278,#4301,#4303,.T.);-#4301 = VERTEX_POINT('',#4302);-#4302 = CARTESIAN_POINT('',(-0.85,0.25,0.9));-#4303 = SURFACE_CURVE('',#4304,(#4309,#4316),.PCURVE_S1.);-#4304 = CIRCLE('',#4305,0.25);-#4305 = AXIS2_PLACEMENT_3D('',#4306,#4307,#4308);-#4306 = CARTESIAN_POINT('',(-0.85,0.25,0.65));-#4307 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#4308 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#4309 = PCURVE('',#1659,#4310);-#4310 = DEFINITIONAL_REPRESENTATION('',(#4311),#4315);-#4311 = CIRCLE('',#4312,0.25);-#4312 = AXIS2_PLACEMENT_2D('',#4313,#4314);-#4313 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#4314 = DIRECTION('',(0.173648177667,-0.984807753012));-#4315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4316 = PCURVE('',#4040,#4317);-#4317 = DEFINITIONAL_REPRESENTATION('',(#4318),#4322);-#4318 = LINE('',#4319,#4320);-#4319 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#4320 = VECTOR('',#4321,1.);-#4321 = DIRECTION('',(-1.,0.));-#4322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4323 = ORIENTED_EDGE('',*,*,#4324,.T.);-#4324 = EDGE_CURVE('',#4301,#1701,#4325,.T.);-#4325 = SURFACE_CURVE('',#4326,(#4330,#4337),.PCURVE_S1.);-#4326 = LINE('',#4327,#4328);-#4327 = CARTESIAN_POINT('',(-0.85,0.25,0.9));-#4328 = VECTOR('',#4329,1.);-#4329 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4330 = PCURVE('',#1659,#4331);-#4331 = DEFINITIONAL_REPRESENTATION('',(#4332),#4336);-#4332 = LINE('',#4333,#4334);-#4333 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#4334 = VECTOR('',#4335,1.);-#4335 = DIRECTION('',(0.,1.));-#4336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4337 = PCURVE('',#2563,#4338);-#4338 = DEFINITIONAL_REPRESENTATION('',(#4339),#4343);-#4339 = LINE('',#4340,#4341);-#4340 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#4341 = VECTOR('',#4342,1.);-#4342 = DIRECTION('',(1.,0.));-#4343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4344 = ADVANCED_FACE('',(#4345),#1766,.F.);-#4345 = FACE_BOUND('',#4346,.F.);-#4346 = EDGE_LOOP('',(#4347,#4348,#4349,#4350));-#4347 = ORIENTED_EDGE('',*,*,#1752,.T.);-#4348 = ORIENTED_EDGE('',*,*,#2447,.T.);-#4349 = ORIENTED_EDGE('',*,*,#2575,.F.);-#4350 = ORIENTED_EDGE('',*,*,#4351,.F.);-#4351 = EDGE_CURVE('',#1701,#2548,#4352,.T.);-#4352 = SURFACE_CURVE('',#4353,(#4357,#4364),.PCURVE_S1.);-#4353 = LINE('',#4354,#4355);-#4354 = CARTESIAN_POINT('',(-0.85,0.25,0.9));-#4355 = VECTOR('',#4356,1.);-#4356 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4357 = PCURVE('',#1766,#4358);-#4358 = DEFINITIONAL_REPRESENTATION('',(#4359),#4363);-#4359 = LINE('',#4360,#4361);-#4360 = CARTESIAN_POINT('',(-0.85,1.1875));-#4361 = VECTOR('',#4362,1.);-#4362 = DIRECTION('',(1.,1.633645143532E-16));-#4363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4364 = PCURVE('',#2563,#4365);-#4365 = DEFINITIONAL_REPRESENTATION('',(#4366),#4370);-#4366 = LINE('',#4367,#4368);-#4367 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#4368 = VECTOR('',#4369,1.);-#4369 = DIRECTION('',(1.,0.));-#4370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4371 = ADVANCED_FACE('',(#4372),#1740,.F.);-#4372 = FACE_BOUND('',#4373,.F.);-#4373 = EDGE_LOOP('',(#4374,#4375,#4376,#4404,#4432,#4461,#4489,#4517,- #4545,#4578,#4606,#4628));-#4374 = ORIENTED_EDGE('',*,*,#1724,.F.);-#4375 = ORIENTED_EDGE('',*,*,#1781,.T.);-#4376 = ORIENTED_EDGE('',*,*,#4377,.T.);-#4377 = EDGE_CURVE('',#1782,#4378,#4380,.T.);-#4378 = VERTEX_POINT('',#4379);-#4379 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));-#4380 = SURFACE_CURVE('',#4381,(#4386,#4397),.PCURVE_S1.);-#4381 = CIRCLE('',#4382,0.1);-#4382 = AXIS2_PLACEMENT_3D('',#4383,#4384,#4385);-#4383 = CARTESIAN_POINT('',(-0.85,0.7,0.65));-#4384 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4385 = DIRECTION('',(0.,0.,1.));-#4386 = PCURVE('',#1740,#4387);-#4387 = DEFINITIONAL_REPRESENTATION('',(#4388),#4396);-#4388 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4389,#4390,#4391,#4392,-#4393,#4394,#4395),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4239 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4240 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#4241 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#4242 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#4243 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#4244 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#4245 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4247 = PCURVE('',#3961,#4248);+#4248 = DEFINITIONAL_REPRESENTATION('',(#4249),#4253);+#4249 = LINE('',#4250,#4251);+#4250 = CARTESIAN_POINT('',(0.,-0.35));+#4251 = VECTOR('',#4252,1.);+#4252 = DIRECTION('',(1.,0.));+#4253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4254 = ORIENTED_EDGE('',*,*,#4255,.T.);+#4255 = EDGE_CURVE('',#4228,#4256,#4258,.T.);+#4256 = VERTEX_POINT('',#4257);+#4257 = CARTESIAN_POINT('',(-1.096201938253,0.175,0.393412044417));+#4258 = SURFACE_CURVE('',#4259,(#4263,#4270),.PCURVE_S1.);+#4259 = LINE('',#4260,#4261);+#4260 = CARTESIAN_POINT('',(-1.11915192277,0.175,0.232635182233));+#4261 = VECTOR('',#4262,1.);+#4262 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#4263 = PCURVE('',#1637,#4264);+#4264 = DEFINITIONAL_REPRESENTATION('',(#4265),#4269);+#4265 = LINE('',#4266,#4267);+#4266 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#4267 = VECTOR('',#4268,1.);+#4268 = DIRECTION('',(0.989965123745,0.14131190243));+#4269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4270 = PCURVE('',#3989,#4271);+#4271 = DEFINITIONAL_REPRESENTATION('',(#4272),#4276);+#4272 = LINE('',#4273,#4274);+#4273 = CARTESIAN_POINT('',(-5.659304441343E-19,-0.35));+#4274 = VECTOR('',#4275,1.);+#4275 = DIRECTION('',(1.,-9.171740543228E-34));+#4276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4277 = ORIENTED_EDGE('',*,*,#4278,.T.);+#4278 = EDGE_CURVE('',#4256,#4279,#4281,.T.);+#4279 = VERTEX_POINT('',#4280);+#4280 = CARTESIAN_POINT('',(-0.85,0.175,0.6));+#4281 = SURFACE_CURVE('',#4282,(#4287,#4294),.PCURVE_S1.);+#4282 = CIRCLE('',#4283,0.25);+#4283 = AXIS2_PLACEMENT_3D('',#4284,#4285,#4286);+#4284 = CARTESIAN_POINT('',(-0.85,0.175,0.35));+#4285 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4286 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4287 = PCURVE('',#1637,#4288);+#4288 = DEFINITIONAL_REPRESENTATION('',(#4289),#4293);+#4289 = CIRCLE('',#4290,0.25);+#4290 = AXIS2_PLACEMENT_2D('',#4291,#4292);+#4291 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#4292 = DIRECTION('',(0.173648177667,-0.984807753012));+#4293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4294 = PCURVE('',#4018,#4295);+#4295 = DEFINITIONAL_REPRESENTATION('',(#4296),#4300);+#4296 = LINE('',#4297,#4298);+#4297 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#4298 = VECTOR('',#4299,1.);+#4299 = DIRECTION('',(-1.,0.));+#4300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4301 = ORIENTED_EDGE('',*,*,#4302,.T.);+#4302 = EDGE_CURVE('',#4279,#1679,#4303,.T.);+#4303 = SURFACE_CURVE('',#4304,(#4308,#4315),.PCURVE_S1.);+#4304 = LINE('',#4305,#4306);+#4305 = CARTESIAN_POINT('',(-0.85,0.175,0.6));+#4306 = VECTOR('',#4307,1.);+#4307 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4308 = PCURVE('',#1637,#4309);+#4309 = DEFINITIONAL_REPRESENTATION('',(#4310),#4314);+#4310 = LINE('',#4311,#4312);+#4311 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#4312 = VECTOR('',#4313,1.);+#4313 = DIRECTION('',(0.,1.));+#4314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4315 = PCURVE('',#2541,#4316);+#4316 = DEFINITIONAL_REPRESENTATION('',(#4317),#4321);+#4317 = LINE('',#4318,#4319);+#4318 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#4319 = VECTOR('',#4320,1.);+#4320 = DIRECTION('',(1.,0.));+#4321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4322 = ADVANCED_FACE('',(#4323),#1744,.F.);+#4323 = FACE_BOUND('',#4324,.F.);+#4324 = EDGE_LOOP('',(#4325,#4326,#4327,#4328));+#4325 = ORIENTED_EDGE('',*,*,#1730,.T.);+#4326 = ORIENTED_EDGE('',*,*,#2425,.T.);+#4327 = ORIENTED_EDGE('',*,*,#2553,.F.);+#4328 = ORIENTED_EDGE('',*,*,#4329,.F.);+#4329 = EDGE_CURVE('',#1679,#2526,#4330,.T.);+#4330 = SURFACE_CURVE('',#4331,(#4335,#4342),.PCURVE_S1.);+#4331 = LINE('',#4332,#4333);+#4332 = CARTESIAN_POINT('',(-0.85,0.175,0.6));+#4333 = VECTOR('',#4334,1.);+#4334 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4335 = PCURVE('',#1744,#4336);+#4336 = DEFINITIONAL_REPRESENTATION('',(#4337),#4341);+#4337 = LINE('',#4338,#4339);+#4338 = CARTESIAN_POINT('',(-0.85,1.2625));+#4339 = VECTOR('',#4340,1.);+#4340 = DIRECTION('',(1.,1.633645143532E-16));+#4341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4342 = PCURVE('',#2541,#4343);+#4343 = DEFINITIONAL_REPRESENTATION('',(#4344),#4348);+#4344 = LINE('',#4345,#4346);+#4345 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#4346 = VECTOR('',#4347,1.);+#4347 = DIRECTION('',(1.,0.));+#4348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4349 = ADVANCED_FACE('',(#4350),#1718,.F.);+#4350 = FACE_BOUND('',#4351,.F.);+#4351 = EDGE_LOOP('',(#4352,#4353,#4354,#4382,#4410,#4439,#4467,#4495,+ #4523,#4556,#4584,#4606));+#4352 = ORIENTED_EDGE('',*,*,#1702,.F.);+#4353 = ORIENTED_EDGE('',*,*,#1759,.T.);+#4354 = ORIENTED_EDGE('',*,*,#4355,.T.);+#4355 = EDGE_CURVE('',#1760,#4356,#4358,.T.);+#4356 = VERTEX_POINT('',#4357);+#4357 = CARTESIAN_POINT('',(-0.948480775301,0.775,0.367364817767));+#4358 = SURFACE_CURVE('',#4359,(#4364,#4375),.PCURVE_S1.);+#4359 = CIRCLE('',#4360,0.1);+#4360 = AXIS2_PLACEMENT_3D('',#4361,#4362,#4363);+#4361 = CARTESIAN_POINT('',(-0.85,0.775,0.35));+#4362 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4363 = DIRECTION('',(0.,0.,1.));+#4364 = PCURVE('',#1718,#4365);+#4365 = DEFINITIONAL_REPRESENTATION('',(#4366),#4374);+#4366 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4367,#4368,#4369,#4370,+#4371,#4372,#4373),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4389 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4390 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#4391 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#4392 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#4393 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#4394 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#4395 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4397 = PCURVE('',#1847,#4398);-#4398 = DEFINITIONAL_REPRESENTATION('',(#4399),#4403);-#4399 = LINE('',#4400,#4401);-#4400 = CARTESIAN_POINT('',(0.,0.));-#4401 = VECTOR('',#4402,1.);-#4402 = DIRECTION('',(1.,0.));-#4403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4404 = ORIENTED_EDGE('',*,*,#4405,.T.);-#4405 = EDGE_CURVE('',#4378,#4406,#4408,.T.);-#4406 = VERTEX_POINT('',#4407);-#4407 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583));-#4408 = SURFACE_CURVE('',#4409,(#4413,#4420),.PCURVE_S1.);-#4409 = LINE('',#4410,#4411);-#4410 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));-#4411 = VECTOR('',#4412,1.);-#4412 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#4413 = PCURVE('',#1740,#4414);-#4414 = DEFINITIONAL_REPRESENTATION('',(#4415),#4419);-#4415 = LINE('',#4416,#4417);-#4416 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#4417 = VECTOR('',#4418,1.);-#4418 = DIRECTION('',(-0.986721169868,-0.162423314012));-#4419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4420 = PCURVE('',#4421,#4426);-#4421 = PLANE('',#4422);-#4422 = AXIS2_PLACEMENT_3D('',#4423,#4424,#4425);-#4423 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));-#4424 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012)- );-#4425 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#4426 = DEFINITIONAL_REPRESENTATION('',(#4427),#4431);-#4427 = LINE('',#4428,#4429);-#4428 = CARTESIAN_POINT('',(0.,0.));-#4429 = VECTOR('',#4430,1.);-#4430 = DIRECTION('',(1.,-1.463835121412E-34));-#4431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4432 = ORIENTED_EDGE('',*,*,#4433,.T.);-#4433 = EDGE_CURVE('',#4406,#4434,#4436,.T.);-#4434 = VERTEX_POINT('',#4435);-#4435 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));-#4436 = SURFACE_CURVE('',#4437,(#4442,#4449),.PCURVE_S1.);-#4437 = CIRCLE('',#4438,0.25);-#4438 = AXIS2_PLACEMENT_3D('',#4439,#4440,#4441);-#4439 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));-#4440 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#4441 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#4442 = PCURVE('',#1740,#4443);-#4443 = DEFINITIONAL_REPRESENTATION('',(#4444),#4448);-#4444 = CIRCLE('',#4445,0.25);-#4445 = AXIS2_PLACEMENT_2D('',#4446,#4447);-#4446 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#4447 = DIRECTION('',(-0.173648177667,0.984807753012));-#4448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4449 = PCURVE('',#4450,#4455);-#4450 = CYLINDRICAL_SURFACE('',#4451,0.25);-#4451 = AXIS2_PLACEMENT_3D('',#4452,#4453,#4454);-#4452 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));-#4453 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4454 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#4455 = DEFINITIONAL_REPRESENTATION('',(#4456),#4460);-#4456 = LINE('',#4457,#4458);-#4457 = CARTESIAN_POINT('',(6.28318530718,0.));-#4458 = VECTOR('',#4459,1.);-#4459 = DIRECTION('',(-1.,0.));-#4460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4461 = ORIENTED_EDGE('',*,*,#4462,.T.);-#4462 = EDGE_CURVE('',#4434,#4463,#4465,.T.);-#4463 = VERTEX_POINT('',#4464);-#4464 = CARTESIAN_POINT('',(-1.4,0.7,0.));-#4465 = SURFACE_CURVE('',#4466,(#4470,#4477),.PCURVE_S1.);-#4466 = LINE('',#4467,#4468);-#4467 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));-#4468 = VECTOR('',#4469,1.);-#4469 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#4470 = PCURVE('',#1740,#4471);-#4471 = DEFINITIONAL_REPRESENTATION('',(#4472),#4476);+#4367 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4368 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#4369 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#4370 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#4371 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#4372 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#4373 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4375 = PCURVE('',#1825,#4376);+#4376 = DEFINITIONAL_REPRESENTATION('',(#4377),#4381);+#4377 = LINE('',#4378,#4379);+#4378 = CARTESIAN_POINT('',(0.,0.));+#4379 = VECTOR('',#4380,1.);+#4380 = DIRECTION('',(1.,0.));+#4381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4382 = ORIENTED_EDGE('',*,*,#4383,.T.);+#4383 = EDGE_CURVE('',#4356,#4384,#4386,.T.);+#4384 = VERTEX_POINT('',#4385);+#4385 = CARTESIAN_POINT('',(-0.971430759818,0.775,0.206587955583));+#4386 = SURFACE_CURVE('',#4387,(#4391,#4398),.PCURVE_S1.);+#4387 = LINE('',#4388,#4389);+#4388 = CARTESIAN_POINT('',(-0.948480775301,0.775,0.367364817767));+#4389 = VECTOR('',#4390,1.);+#4390 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#4391 = PCURVE('',#1718,#4392);+#4392 = DEFINITIONAL_REPRESENTATION('',(#4393),#4397);+#4393 = LINE('',#4394,#4395);+#4394 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#4395 = VECTOR('',#4396,1.);+#4396 = DIRECTION('',(-0.989965123745,-0.14131190243));+#4397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4398 = PCURVE('',#4399,#4404);+#4399 = PLANE('',#4400);+#4400 = AXIS2_PLACEMENT_3D('',#4401,#4402,#4403);+#4401 = CARTESIAN_POINT('',(-0.948480775301,0.775,0.367364817767));+#4402 = DIRECTION('',(-0.989965123745,1.132755461042E-17,0.14131190243)+ );+#4403 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#4404 = DEFINITIONAL_REPRESENTATION('',(#4405),#4409);+#4405 = LINE('',#4406,#4407);+#4406 = CARTESIAN_POINT('',(0.,-0.));+#4407 = VECTOR('',#4408,1.);+#4408 = DIRECTION('',(1.,9.171740543228E-34));+#4409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4410 = ORIENTED_EDGE('',*,*,#4411,.T.);+#4411 = EDGE_CURVE('',#4384,#4412,#4414,.T.);+#4412 = VERTEX_POINT('',#4413);+#4413 = CARTESIAN_POINT('',(-1.217632698071,0.775,5.551115123126E-17));+#4414 = SURFACE_CURVE('',#4415,(#4420,#4427),.PCURVE_S1.);+#4415 = CIRCLE('',#4416,0.25);+#4416 = AXIS2_PLACEMENT_3D('',#4417,#4418,#4419);+#4417 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.25));+#4418 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#4419 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#4420 = PCURVE('',#1718,#4421);+#4421 = DEFINITIONAL_REPRESENTATION('',(#4422),#4426);+#4422 = CIRCLE('',#4423,0.25);+#4423 = AXIS2_PLACEMENT_2D('',#4424,#4425);+#4424 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#4425 = DIRECTION('',(-0.173648177667,0.984807753012));+#4426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4427 = PCURVE('',#4428,#4433);+#4428 = CYLINDRICAL_SURFACE('',#4429,0.25);+#4429 = AXIS2_PLACEMENT_3D('',#4430,#4431,#4432);+#4430 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.25));+#4431 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4432 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#4433 = DEFINITIONAL_REPRESENTATION('',(#4434),#4438);+#4434 = LINE('',#4435,#4436);+#4435 = CARTESIAN_POINT('',(6.28318530718,0.));+#4436 = VECTOR('',#4437,1.);+#4437 = DIRECTION('',(-1.,0.));+#4438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4439 = ORIENTED_EDGE('',*,*,#4440,.T.);+#4440 = EDGE_CURVE('',#4412,#4441,#4443,.T.);+#4441 = VERTEX_POINT('',#4442);+#4442 = CARTESIAN_POINT('',(-1.4,0.775,5.551115123126E-17));+#4443 = SURFACE_CURVE('',#4444,(#4448,#4455),.PCURVE_S1.);+#4444 = LINE('',#4445,#4446);+#4445 = CARTESIAN_POINT('',(-1.217632698071,0.775,5.551115123126E-17));+#4446 = VECTOR('',#4447,1.);+#4447 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#4448 = PCURVE('',#1718,#4449);+#4449 = DEFINITIONAL_REPRESENTATION('',(#4450),#4454);+#4450 = LINE('',#4451,#4452);+#4451 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#4452 = VECTOR('',#4453,1.);+#4453 = DIRECTION('',(0.,-1.));+#4454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4455 = PCURVE('',#4456,#4461);+#4456 = PLANE('',#4457);+#4457 = AXIS2_PLACEMENT_3D('',#4458,#4459,#4460);+#4458 = CARTESIAN_POINT('',(-1.217632698071,0.775,5.551115123126E-17));+#4459 = DIRECTION('',(0.,0.,1.));+#4460 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#4461 = DEFINITIONAL_REPRESENTATION('',(#4462),#4466);+#4462 = LINE('',#4463,#4464);+#4463 = CARTESIAN_POINT('',(0.,0.));+#4464 = VECTOR('',#4465,1.);+#4465 = DIRECTION('',(1.,0.));+#4466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4467 = ORIENTED_EDGE('',*,*,#4468,.T.);+#4468 = EDGE_CURVE('',#4441,#4469,#4471,.T.);+#4469 = VERTEX_POINT('',#4470);+#4470 = CARTESIAN_POINT('',(-1.4,0.775,0.15));+#4471 = SURFACE_CURVE('',#4472,(#4476,#4483),.PCURVE_S1.); #4472 = LINE('',#4473,#4474);-#4473 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));+#4473 = CARTESIAN_POINT('',(-1.4,0.775,5.551115123126E-17)); #4474 = VECTOR('',#4475,1.);-#4475 = DIRECTION('',(0.,-1.));-#4476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4477 = PCURVE('',#4478,#4483);-#4478 = PLANE('',#4479);-#4479 = AXIS2_PLACEMENT_3D('',#4480,#4481,#4482);-#4480 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));-#4481 = DIRECTION('',(0.,0.,1.));-#4482 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#4483 = DEFINITIONAL_REPRESENTATION('',(#4484),#4488);-#4484 = LINE('',#4485,#4486);-#4485 = CARTESIAN_POINT('',(0.,0.));-#4486 = VECTOR('',#4487,1.);-#4487 = DIRECTION('',(1.,0.));-#4488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4489 = ORIENTED_EDGE('',*,*,#4490,.T.);-#4490 = EDGE_CURVE('',#4463,#4491,#4493,.T.);-#4491 = VERTEX_POINT('',#4492);-#4492 = CARTESIAN_POINT('',(-1.4,0.7,0.15));-#4493 = SURFACE_CURVE('',#4494,(#4498,#4505),.PCURVE_S1.);-#4494 = LINE('',#4495,#4496);-#4495 = CARTESIAN_POINT('',(-1.4,0.7,0.));-#4496 = VECTOR('',#4497,1.);-#4497 = DIRECTION('',(0.,0.,1.));-#4498 = PCURVE('',#1740,#4499);-#4499 = DEFINITIONAL_REPRESENTATION('',(#4500),#4504);+#4475 = DIRECTION('',(0.,0.,1.));+#4476 = PCURVE('',#1718,#4477);+#4477 = DEFINITIONAL_REPRESENTATION('',(#4478),#4482);+#4478 = LINE('',#4479,#4480);+#4479 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#4480 = VECTOR('',#4481,1.);+#4481 = DIRECTION('',(1.,0.));+#4482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4483 = PCURVE('',#4484,#4489);+#4484 = PLANE('',#4485);+#4485 = AXIS2_PLACEMENT_3D('',#4486,#4487,#4488);+#4486 = CARTESIAN_POINT('',(-1.4,0.775,5.551115123126E-17));+#4487 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4488 = DIRECTION('',(0.,0.,1.));+#4489 = DEFINITIONAL_REPRESENTATION('',(#4490),#4494);+#4490 = LINE('',#4491,#4492);+#4491 = CARTESIAN_POINT('',(0.,0.));+#4492 = VECTOR('',#4493,1.);+#4493 = DIRECTION('',(1.,0.));+#4494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4495 = ORIENTED_EDGE('',*,*,#4496,.T.);+#4496 = EDGE_CURVE('',#4469,#4497,#4499,.T.);+#4497 = VERTEX_POINT('',#4498);+#4498 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.15));+#4499 = SURFACE_CURVE('',#4500,(#4504,#4511),.PCURVE_S1.); #4500 = LINE('',#4501,#4502);-#4501 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));+#4501 = CARTESIAN_POINT('',(-1.4,0.775,0.15)); #4502 = VECTOR('',#4503,1.);-#4503 = DIRECTION('',(1.,0.));-#4504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4505 = PCURVE('',#4506,#4511);-#4506 = PLANE('',#4507);-#4507 = AXIS2_PLACEMENT_3D('',#4508,#4509,#4510);-#4508 = CARTESIAN_POINT('',(-1.4,0.7,0.));-#4509 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4510 = DIRECTION('',(0.,0.,1.));-#4511 = DEFINITIONAL_REPRESENTATION('',(#4512),#4516);-#4512 = LINE('',#4513,#4514);-#4513 = CARTESIAN_POINT('',(0.,0.));-#4514 = VECTOR('',#4515,1.);-#4515 = DIRECTION('',(1.,0.));-#4516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4517 = ORIENTED_EDGE('',*,*,#4518,.T.);-#4518 = EDGE_CURVE('',#4491,#4519,#4521,.T.);-#4519 = VERTEX_POINT('',#4520);-#4520 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15));-#4521 = SURFACE_CURVE('',#4522,(#4526,#4533),.PCURVE_S1.);-#4522 = LINE('',#4523,#4524);-#4523 = CARTESIAN_POINT('',(-1.4,0.7,0.15));-#4524 = VECTOR('',#4525,1.);-#4525 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4526 = PCURVE('',#1740,#4527);-#4527 = DEFINITIONAL_REPRESENTATION('',(#4528),#4532);-#4528 = LINE('',#4529,#4530);-#4529 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#4530 = VECTOR('',#4531,1.);-#4531 = DIRECTION('',(0.,1.));-#4532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4533 = PCURVE('',#4534,#4539);-#4534 = PLANE('',#4535);-#4535 = AXIS2_PLACEMENT_3D('',#4536,#4537,#4538);-#4536 = CARTESIAN_POINT('',(-1.4,0.7,0.15));-#4537 = DIRECTION('',(0.,0.,-1.));-#4538 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4539 = DEFINITIONAL_REPRESENTATION('',(#4540),#4544);-#4540 = LINE('',#4541,#4542);-#4541 = CARTESIAN_POINT('',(0.,-0.));-#4542 = VECTOR('',#4543,1.);-#4543 = DIRECTION('',(1.,0.));-#4544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4545 = ORIENTED_EDGE('',*,*,#4546,.T.);-#4546 = EDGE_CURVE('',#4519,#4547,#4549,.T.);-#4547 = VERTEX_POINT('',#4548);-#4548 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));-#4549 = SURFACE_CURVE('',#4550,(#4555,#4566),.PCURVE_S1.);-#4550 = CIRCLE('',#4551,0.1);-#4551 = AXIS2_PLACEMENT_3D('',#4552,#4553,#4554);-#4552 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));-#4553 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4554 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#4555 = PCURVE('',#1740,#4556);-#4556 = DEFINITIONAL_REPRESENTATION('',(#4557),#4565);-#4557 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4558,#4559,#4560,#4561,-#4562,#4563,#4564),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4503 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4504 = PCURVE('',#1718,#4505);+#4505 = DEFINITIONAL_REPRESENTATION('',(#4506),#4510);+#4506 = LINE('',#4507,#4508);+#4507 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#4508 = VECTOR('',#4509,1.);+#4509 = DIRECTION('',(0.,1.));+#4510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4511 = PCURVE('',#4512,#4517);+#4512 = PLANE('',#4513);+#4513 = AXIS2_PLACEMENT_3D('',#4514,#4515,#4516);+#4514 = CARTESIAN_POINT('',(-1.4,0.775,0.15));+#4515 = DIRECTION('',(0.,0.,-1.));+#4516 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4517 = DEFINITIONAL_REPRESENTATION('',(#4518),#4522);+#4518 = LINE('',#4519,#4520);+#4519 = CARTESIAN_POINT('',(0.,-0.));+#4520 = VECTOR('',#4521,1.);+#4521 = DIRECTION('',(1.,0.));+#4522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4523 = ORIENTED_EDGE('',*,*,#4524,.T.);+#4524 = EDGE_CURVE('',#4497,#4525,#4527,.T.);+#4525 = VERTEX_POINT('',#4526);+#4526 = CARTESIAN_POINT('',(-1.11915192277,0.775,0.232635182233));+#4527 = SURFACE_CURVE('',#4528,(#4533,#4544),.PCURVE_S1.);+#4528 = CIRCLE('',#4529,0.1);+#4529 = AXIS2_PLACEMENT_3D('',#4530,#4531,#4532);+#4530 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.25));+#4531 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#4532 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#4533 = PCURVE('',#1718,#4534);+#4534 = DEFINITIONAL_REPRESENTATION('',(#4535),#4543);+#4535 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4536,#4537,#4538,#4539,+#4540,#4541,#4542),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4558 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4559 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#4560 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#4561 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#4562 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#4563 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#4564 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4566 = PCURVE('',#4567,#4572);-#4567 = CYLINDRICAL_SURFACE('',#4568,0.1);-#4568 = AXIS2_PLACEMENT_3D('',#4569,#4570,#4571);-#4569 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25));-#4570 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4571 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#4572 = DEFINITIONAL_REPRESENTATION('',(#4573),#4577);-#4573 = LINE('',#4574,#4575);-#4574 = CARTESIAN_POINT('',(0.,0.));-#4575 = VECTOR('',#4576,1.);-#4576 = DIRECTION('',(1.,0.));-#4577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4578 = ORIENTED_EDGE('',*,*,#4579,.T.);-#4579 = EDGE_CURVE('',#4547,#4580,#4582,.T.);-#4580 = VERTEX_POINT('',#4581);-#4581 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417));-#4582 = SURFACE_CURVE('',#4583,(#4587,#4594),.PCURVE_S1.);-#4583 = LINE('',#4584,#4585);-#4584 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));-#4585 = VECTOR('',#4586,1.);-#4586 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#4587 = PCURVE('',#1740,#4588);-#4588 = DEFINITIONAL_REPRESENTATION('',(#4589),#4593);-#4589 = LINE('',#4590,#4591);-#4590 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#4591 = VECTOR('',#4592,1.);-#4592 = DIRECTION('',(0.986721169868,0.162423314012));-#4593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4594 = PCURVE('',#4595,#4600);-#4595 = PLANE('',#4596);-#4596 = AXIS2_PLACEMENT_3D('',#4597,#4598,#4599);-#4597 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));-#4598 = DIRECTION('',(0.986721169868,-1.129043606572E-17,-0.162423314012- ));-#4599 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );+#4536 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4537 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#4538 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#4539 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#4540 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#4541 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#4542 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4544 = PCURVE('',#4545,#4550);+#4545 = CYLINDRICAL_SURFACE('',#4546,0.1);+#4546 = AXIS2_PLACEMENT_3D('',#4547,#4548,#4549);+#4547 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.25));+#4548 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4549 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#4550 = DEFINITIONAL_REPRESENTATION('',(#4551),#4555);+#4551 = LINE('',#4552,#4553);+#4552 = CARTESIAN_POINT('',(0.,0.));+#4553 = VECTOR('',#4554,1.);+#4554 = DIRECTION('',(1.,0.));+#4555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4556 = ORIENTED_EDGE('',*,*,#4557,.T.);+#4557 = EDGE_CURVE('',#4525,#4558,#4560,.T.);+#4558 = VERTEX_POINT('',#4559);+#4559 = CARTESIAN_POINT('',(-1.096201938253,0.775,0.393412044417));+#4560 = SURFACE_CURVE('',#4561,(#4565,#4572),.PCURVE_S1.);+#4561 = LINE('',#4562,#4563);+#4562 = CARTESIAN_POINT('',(-1.11915192277,0.775,0.232635182233));+#4563 = VECTOR('',#4564,1.);+#4564 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#4565 = PCURVE('',#1718,#4566);+#4566 = DEFINITIONAL_REPRESENTATION('',(#4567),#4571);+#4567 = LINE('',#4568,#4569);+#4568 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#4569 = VECTOR('',#4570,1.);+#4570 = DIRECTION('',(0.989965123745,0.14131190243));+#4571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4572 = PCURVE('',#4573,#4578);+#4573 = PLANE('',#4574);+#4574 = AXIS2_PLACEMENT_3D('',#4575,#4576,#4577);+#4575 = CARTESIAN_POINT('',(-1.11915192277,0.775,0.232635182233));+#4576 = DIRECTION('',(0.989965123745,-1.132755461042E-17,-0.14131190243)+ );+#4577 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#4578 = DEFINITIONAL_REPRESENTATION('',(#4579),#4583);+#4579 = LINE('',#4580,#4581);+#4580 = CARTESIAN_POINT('',(0.,-0.));+#4581 = VECTOR('',#4582,1.);+#4582 = DIRECTION('',(1.,-9.171740543228E-34));+#4583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4584 = ORIENTED_EDGE('',*,*,#4585,.T.);+#4585 = EDGE_CURVE('',#4558,#2330,#4586,.T.);+#4586 = SURFACE_CURVE('',#4587,(#4592,#4599),.PCURVE_S1.);+#4587 = CIRCLE('',#4588,0.25);+#4588 = AXIS2_PLACEMENT_3D('',#4589,#4590,#4591);+#4589 = CARTESIAN_POINT('',(-0.85,0.775,0.35));+#4590 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4591 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4592 = PCURVE('',#1718,#4593);+#4593 = DEFINITIONAL_REPRESENTATION('',(#4594),#4598);+#4594 = CIRCLE('',#4595,0.25);+#4595 = AXIS2_PLACEMENT_2D('',#4596,#4597);+#4596 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#4597 = DIRECTION('',(0.173648177667,-0.984807753012));+#4598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4599 = PCURVE('',#2368,#4600); #4600 = DEFINITIONAL_REPRESENTATION('',(#4601),#4605); #4601 = LINE('',#4602,#4603);-#4602 = CARTESIAN_POINT('',(0.,0.));+#4602 = CARTESIAN_POINT('',(6.28318530718,0.)); #4603 = VECTOR('',#4604,1.);-#4604 = DIRECTION('',(1.,1.463835121412E-34));+#4604 = DIRECTION('',(-1.,0.)); #4605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4606 = ORIENTED_EDGE('',*,*,#4607,.T.);-#4607 = EDGE_CURVE('',#4580,#2352,#4608,.T.);-#4608 = SURFACE_CURVE('',#4609,(#4614,#4621),.PCURVE_S1.);-#4609 = CIRCLE('',#4610,0.25);-#4610 = AXIS2_PLACEMENT_3D('',#4611,#4612,#4613);-#4611 = CARTESIAN_POINT('',(-0.85,0.7,0.65));-#4612 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#4613 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#4614 = PCURVE('',#1740,#4615);-#4615 = DEFINITIONAL_REPRESENTATION('',(#4616),#4620);-#4616 = CIRCLE('',#4617,0.25);-#4617 = AXIS2_PLACEMENT_2D('',#4618,#4619);-#4618 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#4619 = DIRECTION('',(0.173648177667,-0.984807753012));-#4620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4621 = PCURVE('',#2390,#4622);+#4606 = ORIENTED_EDGE('',*,*,#2329,.T.);+#4607 = ADVANCED_FACE('',(#4608),#1825,.F.);+#4608 = FACE_BOUND('',#4609,.F.);+#4609 = EDGE_LOOP('',(#4610,#4611,#4639,#4660));+#4610 = ORIENTED_EDGE('',*,*,#1811,.T.);+#4611 = ORIENTED_EDGE('',*,*,#4612,.T.);+#4612 = EDGE_CURVE('',#1784,#4613,#4615,.T.);+#4613 = VERTEX_POINT('',#4614);+#4614 = CARTESIAN_POINT('',(-0.948480775301,1.125,0.367364817767));+#4615 = SURFACE_CURVE('',#4616,(#4621,#4628),.PCURVE_S1.);+#4616 = CIRCLE('',#4617,0.1);+#4617 = AXIS2_PLACEMENT_3D('',#4618,#4619,#4620);+#4618 = CARTESIAN_POINT('',(-0.85,1.125,0.35));+#4619 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4620 = DIRECTION('',(0.,0.,1.));+#4621 = PCURVE('',#1825,#4622); #4622 = DEFINITIONAL_REPRESENTATION('',(#4623),#4627); #4623 = LINE('',#4624,#4625);-#4624 = CARTESIAN_POINT('',(6.28318530718,0.));+#4624 = CARTESIAN_POINT('',(0.,-0.35)); #4625 = VECTOR('',#4626,1.);-#4626 = DIRECTION('',(-1.,0.));+#4626 = DIRECTION('',(1.,0.)); #4627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4628 = ORIENTED_EDGE('',*,*,#2351,.T.);-#4629 = ADVANCED_FACE('',(#4630),#1847,.F.);-#4630 = FACE_BOUND('',#4631,.F.);-#4631 = EDGE_LOOP('',(#4632,#4633,#4661,#4682));-#4632 = ORIENTED_EDGE('',*,*,#1833,.T.);-#4633 = ORIENTED_EDGE('',*,*,#4634,.T.);-#4634 = EDGE_CURVE('',#1806,#4635,#4637,.T.);-#4635 = VERTEX_POINT('',#4636);-#4636 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767));-#4637 = SURFACE_CURVE('',#4638,(#4643,#4650),.PCURVE_S1.);-#4638 = CIRCLE('',#4639,0.1);-#4639 = AXIS2_PLACEMENT_3D('',#4640,#4641,#4642);-#4640 = CARTESIAN_POINT('',(-0.85,1.2,0.65));-#4641 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4642 = DIRECTION('',(0.,0.,1.));-#4643 = PCURVE('',#1847,#4644);-#4644 = DEFINITIONAL_REPRESENTATION('',(#4645),#4649);-#4645 = LINE('',#4646,#4647);-#4646 = CARTESIAN_POINT('',(0.,-0.5));-#4647 = VECTOR('',#4648,1.);-#4648 = DIRECTION('',(1.,0.));-#4649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4650 = PCURVE('',#1821,#4651);-#4651 = DEFINITIONAL_REPRESENTATION('',(#4652),#4660);-#4652 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4653,#4654,#4655,#4656,-#4657,#4658,#4659),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4628 = PCURVE('',#1799,#4629);+#4629 = DEFINITIONAL_REPRESENTATION('',(#4630),#4638);+#4630 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4631,#4632,#4633,#4634,+#4635,#4636,#4637),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4653 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4654 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#4655 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#4656 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#4657 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#4658 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#4659 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4661 = ORIENTED_EDGE('',*,*,#4662,.F.);-#4662 = EDGE_CURVE('',#4378,#4635,#4663,.T.);-#4663 = SURFACE_CURVE('',#4664,(#4668,#4675),.PCURVE_S1.);-#4664 = LINE('',#4665,#4666);-#4665 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767));-#4666 = VECTOR('',#4667,1.);-#4667 = DIRECTION('',(1.144237745222E-17,1.,0.));-#4668 = PCURVE('',#1847,#4669);-#4669 = DEFINITIONAL_REPRESENTATION('',(#4670),#4674);-#4670 = LINE('',#4671,#4672);-#4671 = CARTESIAN_POINT('',(1.396263401592,0.));-#4672 = VECTOR('',#4673,1.);-#4673 = DIRECTION('',(0.,-1.));-#4674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4675 = PCURVE('',#4421,#4676);-#4676 = DEFINITIONAL_REPRESENTATION('',(#4677),#4681);-#4677 = LINE('',#4678,#4679);-#4678 = CARTESIAN_POINT('',(0.,0.));-#4679 = VECTOR('',#4680,1.);-#4680 = DIRECTION('',(-1.7573160551E-30,-1.));-#4681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4682 = ORIENTED_EDGE('',*,*,#4377,.F.);-#4683 = ADVANCED_FACE('',(#4684),#1821,.T.);-#4684 = FACE_BOUND('',#4685,.T.);-#4685 = EDGE_LOOP('',(#4686,#4687,#4688,#4689,#4712,#4736,#4759,#4782,- #4805,#4833,#4856,#4878));-#4686 = ORIENTED_EDGE('',*,*,#1862,.F.);-#4687 = ORIENTED_EDGE('',*,*,#1805,.T.);-#4688 = ORIENTED_EDGE('',*,*,#4634,.T.);-#4689 = ORIENTED_EDGE('',*,*,#4690,.T.);-#4690 = EDGE_CURVE('',#4635,#4691,#4693,.T.);-#4691 = VERTEX_POINT('',#4692);-#4692 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583));-#4693 = SURFACE_CURVE('',#4694,(#4698,#4705),.PCURVE_S1.);-#4694 = LINE('',#4695,#4696);-#4695 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767));-#4696 = VECTOR('',#4697,1.);-#4697 = DIRECTION('',(-0.162423314012,1.858508865964E-18,-0.986721169868- ));-#4698 = PCURVE('',#1821,#4699);-#4699 = DEFINITIONAL_REPRESENTATION('',(#4700),#4704);-#4700 = LINE('',#4701,#4702);-#4701 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#4702 = VECTOR('',#4703,1.);-#4703 = DIRECTION('',(-0.986721169868,-0.162423314012));-#4704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4705 = PCURVE('',#4421,#4706);-#4706 = DEFINITIONAL_REPRESENTATION('',(#4707),#4711);-#4707 = LINE('',#4708,#4709);-#4708 = CARTESIAN_POINT('',(9.292544329819E-19,-0.5));-#4709 = VECTOR('',#4710,1.);-#4710 = DIRECTION('',(1.,-1.463835121412E-34));-#4711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4712 = ORIENTED_EDGE('',*,*,#4713,.T.);-#4713 = EDGE_CURVE('',#4691,#4714,#4716,.T.);-#4714 = VERTEX_POINT('',#4715);-#4715 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.));-#4716 = SURFACE_CURVE('',#4717,(#4722,#4729),.PCURVE_S1.);-#4717 = CIRCLE('',#4718,0.25);-#4718 = AXIS2_PLACEMENT_3D('',#4719,#4720,#4721);-#4719 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25));-#4720 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));-#4721 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667- ));-#4722 = PCURVE('',#1821,#4723);-#4723 = DEFINITIONAL_REPRESENTATION('',(#4724),#4728);-#4724 = CIRCLE('',#4725,0.25);-#4725 = AXIS2_PLACEMENT_2D('',#4726,#4727);-#4726 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#4727 = DIRECTION('',(-0.173648177667,0.984807753012));-#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4729 = PCURVE('',#4450,#4730);-#4730 = DEFINITIONAL_REPRESENTATION('',(#4731),#4735);-#4731 = LINE('',#4732,#4733);-#4732 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#4733 = VECTOR('',#4734,1.);-#4734 = DIRECTION('',(-1.,0.));-#4735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4736 = ORIENTED_EDGE('',*,*,#4737,.T.);-#4737 = EDGE_CURVE('',#4714,#4738,#4740,.T.);-#4738 = VERTEX_POINT('',#4739);-#4739 = CARTESIAN_POINT('',(-1.4,1.2,0.));-#4740 = SURFACE_CURVE('',#4741,(#4745,#4752),.PCURVE_S1.);-#4741 = LINE('',#4742,#4743);-#4742 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.));-#4743 = VECTOR('',#4744,1.);-#4744 = DIRECTION('',(-1.,1.144237745222E-17,0.));-#4745 = PCURVE('',#1821,#4746);-#4746 = DEFINITIONAL_REPRESENTATION('',(#4747),#4751);-#4747 = LINE('',#4748,#4749);-#4748 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));-#4749 = VECTOR('',#4750,1.);-#4750 = DIRECTION('',(0.,-1.));-#4751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4752 = PCURVE('',#4478,#4753);-#4753 = DEFINITIONAL_REPRESENTATION('',(#4754),#4758);-#4754 = LINE('',#4755,#4756);-#4755 = CARTESIAN_POINT('',(5.72118872611E-18,-0.5));-#4756 = VECTOR('',#4757,1.);-#4757 = DIRECTION('',(1.,0.));-#4758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4759 = ORIENTED_EDGE('',*,*,#4760,.T.);-#4760 = EDGE_CURVE('',#4738,#4761,#4763,.T.);-#4761 = VERTEX_POINT('',#4762);-#4762 = CARTESIAN_POINT('',(-1.4,1.2,0.15));-#4763 = SURFACE_CURVE('',#4764,(#4768,#4775),.PCURVE_S1.);-#4764 = LINE('',#4765,#4766);-#4765 = CARTESIAN_POINT('',(-1.4,1.2,0.));-#4766 = VECTOR('',#4767,1.);-#4767 = DIRECTION('',(0.,0.,1.));-#4768 = PCURVE('',#1821,#4769);-#4769 = DEFINITIONAL_REPRESENTATION('',(#4770),#4774);-#4770 = LINE('',#4771,#4772);-#4771 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));-#4772 = VECTOR('',#4773,1.);-#4773 = DIRECTION('',(1.,0.));-#4774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4775 = PCURVE('',#4506,#4776);-#4776 = DEFINITIONAL_REPRESENTATION('',(#4777),#4781);-#4777 = LINE('',#4778,#4779);-#4778 = CARTESIAN_POINT('',(0.,-0.5));-#4779 = VECTOR('',#4780,1.);-#4780 = DIRECTION('',(1.,0.));-#4781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4782 = ORIENTED_EDGE('',*,*,#4783,.T.);-#4783 = EDGE_CURVE('',#4761,#4784,#4786,.T.);-#4784 = VERTEX_POINT('',#4785);-#4785 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15));-#4786 = SURFACE_CURVE('',#4787,(#4791,#4798),.PCURVE_S1.);-#4787 = LINE('',#4788,#4789);-#4788 = CARTESIAN_POINT('',(-1.4,1.2,0.15));-#4789 = VECTOR('',#4790,1.);-#4790 = DIRECTION('',(1.,-1.144237745222E-17,0.));-#4791 = PCURVE('',#1821,#4792);-#4792 = DEFINITIONAL_REPRESENTATION('',(#4793),#4797);-#4793 = LINE('',#4794,#4795);-#4794 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#4795 = VECTOR('',#4796,1.);-#4796 = DIRECTION('',(0.,1.));-#4797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4798 = PCURVE('',#4534,#4799);-#4799 = DEFINITIONAL_REPRESENTATION('',(#4800),#4804);-#4800 = LINE('',#4801,#4802);-#4801 = CARTESIAN_POINT('',(-5.72118872611E-18,-0.5));-#4802 = VECTOR('',#4803,1.);-#4803 = DIRECTION('',(1.,0.));-#4804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4805 = ORIENTED_EDGE('',*,*,#4806,.T.);-#4806 = EDGE_CURVE('',#4784,#4807,#4809,.T.);-#4807 = VERTEX_POINT('',#4808);-#4808 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233));-#4809 = SURFACE_CURVE('',#4810,(#4815,#4826),.PCURVE_S1.);-#4810 = CIRCLE('',#4811,0.1);-#4811 = AXIS2_PLACEMENT_3D('',#4812,#4813,#4814);-#4812 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25));-#4813 = DIRECTION('',(-1.144237745222E-17,-1.,0.));-#4814 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));-#4815 = PCURVE('',#1821,#4816);-#4816 = DEFINITIONAL_REPRESENTATION('',(#4817),#4825);-#4817 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4818,#4819,#4820,#4821,-#4822,#4823,#4824),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4631 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4632 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#4633 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#4634 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#4635 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#4636 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#4637 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4639 = ORIENTED_EDGE('',*,*,#4640,.F.);+#4640 = EDGE_CURVE('',#4356,#4613,#4641,.T.);+#4641 = SURFACE_CURVE('',#4642,(#4646,#4653),.PCURVE_S1.);+#4642 = LINE('',#4643,#4644);+#4643 = CARTESIAN_POINT('',(-0.948480775301,0.775,0.367364817767));+#4644 = VECTOR('',#4645,1.);+#4645 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4646 = PCURVE('',#1825,#4647);+#4647 = DEFINITIONAL_REPRESENTATION('',(#4648),#4652);+#4648 = LINE('',#4649,#4650);+#4649 = CARTESIAN_POINT('',(1.396263401592,0.));+#4650 = VECTOR('',#4651,1.);+#4651 = DIRECTION('',(0.,-1.));+#4652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4653 = PCURVE('',#4399,#4654);+#4654 = DEFINITIONAL_REPRESENTATION('',(#4655),#4659);+#4655 = LINE('',#4656,#4657);+#4656 = CARTESIAN_POINT('',(0.,-0.));+#4657 = VECTOR('',#4658,1.);+#4658 = DIRECTION('',(2.656255567127E-30,-1.));+#4659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4660 = ORIENTED_EDGE('',*,*,#4355,.F.);+#4661 = ADVANCED_FACE('',(#4662),#1799,.T.);+#4662 = FACE_BOUND('',#4663,.T.);+#4663 = EDGE_LOOP('',(#4664,#4665,#4666,#4667,#4690,#4714,#4737,#4760,+ #4783,#4811,#4834,#4856));+#4664 = ORIENTED_EDGE('',*,*,#1840,.F.);+#4665 = ORIENTED_EDGE('',*,*,#1783,.T.);+#4666 = ORIENTED_EDGE('',*,*,#4612,.T.);+#4667 = ORIENTED_EDGE('',*,*,#4668,.T.);+#4668 = EDGE_CURVE('',#4613,#4669,#4671,.T.);+#4669 = VERTEX_POINT('',#4670);+#4670 = CARTESIAN_POINT('',(-0.971430759818,1.125,0.206587955583));+#4671 = SURFACE_CURVE('',#4672,(#4676,#4683),.PCURVE_S1.);+#4672 = LINE('',#4673,#4674);+#4673 = CARTESIAN_POINT('',(-0.948480775301,1.125,0.367364817767));+#4674 = VECTOR('',#4675,1.);+#4675 = DIRECTION('',(-0.14131190243,1.616944126098E-18,-0.989965123745)+ );+#4676 = PCURVE('',#1799,#4677);+#4677 = DEFINITIONAL_REPRESENTATION('',(#4678),#4682);+#4678 = LINE('',#4679,#4680);+#4679 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#4680 = VECTOR('',#4681,1.);+#4681 = DIRECTION('',(-0.989965123745,-0.14131190243));+#4682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4683 = PCURVE('',#4399,#4684);+#4684 = DEFINITIONAL_REPRESENTATION('',(#4685),#4689);+#4685 = LINE('',#4686,#4687);+#4686 = CARTESIAN_POINT('',(5.659304441343E-19,-0.35));+#4687 = VECTOR('',#4688,1.);+#4688 = DIRECTION('',(1.,9.171740543228E-34));+#4689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4690 = ORIENTED_EDGE('',*,*,#4691,.T.);+#4691 = EDGE_CURVE('',#4669,#4692,#4694,.T.);+#4692 = VERTEX_POINT('',#4693);+#4693 = CARTESIAN_POINT('',(-1.217632698071,1.125,5.551115123126E-17));+#4694 = SURFACE_CURVE('',#4695,(#4700,#4707),.PCURVE_S1.);+#4695 = CIRCLE('',#4696,0.25);+#4696 = AXIS2_PLACEMENT_3D('',#4697,#4698,#4699);+#4697 = CARTESIAN_POINT('',(-1.217632698071,1.125,0.25));+#4698 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34));+#4699 = DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667+ ));+#4700 = PCURVE('',#1799,#4701);+#4701 = DEFINITIONAL_REPRESENTATION('',(#4702),#4706);+#4702 = CIRCLE('',#4703,0.25);+#4703 = AXIS2_PLACEMENT_2D('',#4704,#4705);+#4704 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#4705 = DIRECTION('',(-0.173648177667,0.984807753012));+#4706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4707 = PCURVE('',#4428,#4708);+#4708 = DEFINITIONAL_REPRESENTATION('',(#4709),#4713);+#4709 = LINE('',#4710,#4711);+#4710 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#4711 = VECTOR('',#4712,1.);+#4712 = DIRECTION('',(-1.,0.));+#4713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4714 = ORIENTED_EDGE('',*,*,#4715,.T.);+#4715 = EDGE_CURVE('',#4692,#4716,#4718,.T.);+#4716 = VERTEX_POINT('',#4717);+#4717 = CARTESIAN_POINT('',(-1.4,1.125,5.551115123126E-17));+#4718 = SURFACE_CURVE('',#4719,(#4723,#4730),.PCURVE_S1.);+#4719 = LINE('',#4720,#4721);+#4720 = CARTESIAN_POINT('',(-1.217632698071,1.125,5.551115123126E-17));+#4721 = VECTOR('',#4722,1.);+#4722 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#4723 = PCURVE('',#1799,#4724);+#4724 = DEFINITIONAL_REPRESENTATION('',(#4725),#4729);+#4725 = LINE('',#4726,#4727);+#4726 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#4727 = VECTOR('',#4728,1.);+#4728 = DIRECTION('',(0.,-1.));+#4729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4730 = PCURVE('',#4456,#4731);+#4731 = DEFINITIONAL_REPRESENTATION('',(#4732),#4736);+#4732 = LINE('',#4733,#4734);+#4733 = CARTESIAN_POINT('',(4.004832108277E-18,-0.35));+#4734 = VECTOR('',#4735,1.);+#4735 = DIRECTION('',(1.,0.));+#4736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4737 = ORIENTED_EDGE('',*,*,#4738,.T.);+#4738 = EDGE_CURVE('',#4716,#4739,#4741,.T.);+#4739 = VERTEX_POINT('',#4740);+#4740 = CARTESIAN_POINT('',(-1.4,1.125,0.15));+#4741 = SURFACE_CURVE('',#4742,(#4746,#4753),.PCURVE_S1.);+#4742 = LINE('',#4743,#4744);+#4743 = CARTESIAN_POINT('',(-1.4,1.125,5.551115123126E-17));+#4744 = VECTOR('',#4745,1.);+#4745 = DIRECTION('',(0.,0.,1.));+#4746 = PCURVE('',#1799,#4747);+#4747 = DEFINITIONAL_REPRESENTATION('',(#4748),#4752);+#4748 = LINE('',#4749,#4750);+#4749 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#4750 = VECTOR('',#4751,1.);+#4751 = DIRECTION('',(1.,0.));+#4752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4753 = PCURVE('',#4484,#4754);+#4754 = DEFINITIONAL_REPRESENTATION('',(#4755),#4759);+#4755 = LINE('',#4756,#4757);+#4756 = CARTESIAN_POINT('',(0.,-0.35));+#4757 = VECTOR('',#4758,1.);+#4758 = DIRECTION('',(1.,0.));+#4759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4760 = ORIENTED_EDGE('',*,*,#4761,.T.);+#4761 = EDGE_CURVE('',#4739,#4762,#4764,.T.);+#4762 = VERTEX_POINT('',#4763);+#4763 = CARTESIAN_POINT('',(-1.217632698071,1.125,0.15));+#4764 = SURFACE_CURVE('',#4765,(#4769,#4776),.PCURVE_S1.);+#4765 = LINE('',#4766,#4767);+#4766 = CARTESIAN_POINT('',(-1.4,1.125,0.15));+#4767 = VECTOR('',#4768,1.);+#4768 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#4769 = PCURVE('',#1799,#4770);+#4770 = DEFINITIONAL_REPRESENTATION('',(#4771),#4775);+#4771 = LINE('',#4772,#4773);+#4772 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#4773 = VECTOR('',#4774,1.);+#4774 = DIRECTION('',(0.,1.));+#4775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4776 = PCURVE('',#4512,#4777);+#4777 = DEFINITIONAL_REPRESENTATION('',(#4778),#4782);+#4778 = LINE('',#4779,#4780);+#4779 = CARTESIAN_POINT('',(-4.004832108277E-18,-0.35));+#4780 = VECTOR('',#4781,1.);+#4781 = DIRECTION('',(1.,0.));+#4782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4783 = ORIENTED_EDGE('',*,*,#4784,.T.);+#4784 = EDGE_CURVE('',#4762,#4785,#4787,.T.);+#4785 = VERTEX_POINT('',#4786);+#4786 = CARTESIAN_POINT('',(-1.11915192277,1.125,0.232635182233));+#4787 = SURFACE_CURVE('',#4788,(#4793,#4804),.PCURVE_S1.);+#4788 = CIRCLE('',#4789,0.1);+#4789 = AXIS2_PLACEMENT_3D('',#4790,#4791,#4792);+#4790 = CARTESIAN_POINT('',(-1.217632698071,1.125,0.25));+#4791 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47));+#4792 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.));+#4793 = PCURVE('',#1799,#4794);+#4794 = DEFINITIONAL_REPRESENTATION('',(#4795),#4803);+#4795 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4796,#4797,#4798,#4799,+#4800,#4801,#4802),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4818 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4819 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#4820 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#4821 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#4822 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#4823 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#4824 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#4825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4826 = PCURVE('',#4567,#4827);-#4827 = DEFINITIONAL_REPRESENTATION('',(#4828),#4832);-#4828 = LINE('',#4829,#4830);-#4829 = CARTESIAN_POINT('',(0.,-0.5));-#4830 = VECTOR('',#4831,1.);-#4831 = DIRECTION('',(1.,0.));-#4832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4833 = ORIENTED_EDGE('',*,*,#4834,.T.);-#4834 = EDGE_CURVE('',#4807,#4835,#4837,.T.);-#4835 = VERTEX_POINT('',#4836);-#4836 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417));-#4837 = SURFACE_CURVE('',#4838,(#4842,#4849),.PCURVE_S1.);-#4838 = LINE('',#4839,#4840);-#4839 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233));-#4840 = VECTOR('',#4841,1.);-#4841 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868)- );-#4842 = PCURVE('',#1821,#4843);+#4796 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4797 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#4798 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#4799 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#4800 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#4801 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#4802 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#4803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4804 = PCURVE('',#4545,#4805);+#4805 = DEFINITIONAL_REPRESENTATION('',(#4806),#4810);+#4806 = LINE('',#4807,#4808);+#4807 = CARTESIAN_POINT('',(0.,-0.35));+#4808 = VECTOR('',#4809,1.);+#4809 = DIRECTION('',(1.,0.));+#4810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4811 = ORIENTED_EDGE('',*,*,#4812,.T.);+#4812 = EDGE_CURVE('',#4785,#4813,#4815,.T.);+#4813 = VERTEX_POINT('',#4814);+#4814 = CARTESIAN_POINT('',(-1.096201938253,1.125,0.393412044417));+#4815 = SURFACE_CURVE('',#4816,(#4820,#4827),.PCURVE_S1.);+#4816 = LINE('',#4817,#4818);+#4817 = CARTESIAN_POINT('',(-1.11915192277,1.125,0.232635182233));+#4818 = VECTOR('',#4819,1.);+#4819 = DIRECTION('',(0.14131190243,-1.616944126098E-18,0.989965123745)+ );+#4820 = PCURVE('',#1799,#4821);+#4821 = DEFINITIONAL_REPRESENTATION('',(#4822),#4826);+#4822 = LINE('',#4823,#4824);+#4823 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#4824 = VECTOR('',#4825,1.);+#4825 = DIRECTION('',(0.989965123745,0.14131190243));+#4826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4827 = PCURVE('',#4573,#4828);+#4828 = DEFINITIONAL_REPRESENTATION('',(#4829),#4833);+#4829 = LINE('',#4830,#4831);+#4830 = CARTESIAN_POINT('',(-5.659304441343E-19,-0.35));+#4831 = VECTOR('',#4832,1.);+#4832 = DIRECTION('',(1.,-9.171740543228E-34));+#4833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4834 = ORIENTED_EDGE('',*,*,#4835,.T.);+#4835 = EDGE_CURVE('',#4813,#2353,#4836,.T.);+#4836 = SURFACE_CURVE('',#4837,(#4842,#4849),.PCURVE_S1.);+#4837 = CIRCLE('',#4838,0.25);+#4838 = AXIS2_PLACEMENT_3D('',#4839,#4840,#4841);+#4839 = CARTESIAN_POINT('',(-0.85,1.125,0.35));+#4840 = DIRECTION('',(1.144237745222E-17,1.,0.));+#4841 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#4842 = PCURVE('',#1799,#4843); #4843 = DEFINITIONAL_REPRESENTATION('',(#4844),#4848);-#4844 = LINE('',#4845,#4846);-#4845 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#4846 = VECTOR('',#4847,1.);-#4847 = DIRECTION('',(0.986721169868,0.162423314012));+#4844 = CIRCLE('',#4845,0.25);+#4845 = AXIS2_PLACEMENT_2D('',#4846,#4847);+#4846 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#4847 = DIRECTION('',(0.173648177667,-0.984807753012)); #4848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4849 = PCURVE('',#4595,#4850);+#4849 = PCURVE('',#2368,#4850); #4850 = DEFINITIONAL_REPRESENTATION('',(#4851),#4855); #4851 = LINE('',#4852,#4853);-#4852 = CARTESIAN_POINT('',(-9.292544329819E-19,-0.5));+#4852 = CARTESIAN_POINT('',(6.28318530718,-0.35)); #4853 = VECTOR('',#4854,1.);-#4854 = DIRECTION('',(1.,1.463835121412E-34));+#4854 = DIRECTION('',(-1.,0.)); #4855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#4856 = ORIENTED_EDGE('',*,*,#4857,.T.);-#4857 = EDGE_CURVE('',#4835,#2375,#4858,.T.);-#4858 = SURFACE_CURVE('',#4859,(#4864,#4871),.PCURVE_S1.);-#4859 = CIRCLE('',#4860,0.25);-#4860 = AXIS2_PLACEMENT_3D('',#4861,#4862,#4863);-#4861 = CARTESIAN_POINT('',(-0.85,1.2,0.65));-#4862 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));-#4863 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)- );-#4864 = PCURVE('',#1821,#4865);-#4865 = DEFINITIONAL_REPRESENTATION('',(#4866),#4870);-#4866 = CIRCLE('',#4867,0.25);-#4867 = AXIS2_PLACEMENT_2D('',#4868,#4869);-#4868 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#4869 = DIRECTION('',(0.173648177667,-0.984807753012));-#4870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4871 = PCURVE('',#2390,#4872);-#4872 = DEFINITIONAL_REPRESENTATION('',(#4873),#4877);-#4873 = LINE('',#4874,#4875);-#4874 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#4875 = VECTOR('',#4876,1.);-#4876 = DIRECTION('',(-1.,0.));-#4877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4878 = ORIENTED_EDGE('',*,*,#2402,.T.);-#4879 = ADVANCED_FACE('',(#4880),#1905,.F.);-#4880 = FACE_BOUND('',#4881,.F.);-#4881 = EDGE_LOOP('',(#4882,#4883,#4884,#4912,#4940,#4969,#4997,#5025,- #5053,#5086,#5114,#5136));-#4882 = ORIENTED_EDGE('',*,*,#1891,.F.);-#4883 = ORIENTED_EDGE('',*,*,#1921,.T.);-#4884 = ORIENTED_EDGE('',*,*,#4885,.T.);-#4885 = EDGE_CURVE('',#1922,#4886,#4888,.T.);-#4886 = VERTEX_POINT('',#4887);-#4887 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));-#4888 = SURFACE_CURVE('',#4889,(#4894,#4905),.PCURVE_S1.);-#4889 = CIRCLE('',#4890,0.1);-#4890 = AXIS2_PLACEMENT_3D('',#4891,#4892,#4893);-#4891 = CARTESIAN_POINT('',(0.85,1.2,0.65));-#4892 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#4893 = DIRECTION('',(0.,0.,1.));-#4894 = PCURVE('',#1905,#4895);-#4895 = DEFINITIONAL_REPRESENTATION('',(#4896),#4904);-#4896 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4897,#4898,#4899,#4900,-#4901,#4902,#4903),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#4856 = ORIENTED_EDGE('',*,*,#2380,.T.);+#4857 = ADVANCED_FACE('',(#4858),#1883,.F.);+#4858 = FACE_BOUND('',#4859,.F.);+#4859 = EDGE_LOOP('',(#4860,#4861,#4862,#4890,#4918,#4947,#4975,#5003,+ #5031,#5064,#5092,#5114));+#4860 = ORIENTED_EDGE('',*,*,#1869,.F.);+#4861 = ORIENTED_EDGE('',*,*,#1899,.T.);+#4862 = ORIENTED_EDGE('',*,*,#4863,.T.);+#4863 = EDGE_CURVE('',#1900,#4864,#4866,.T.);+#4864 = VERTEX_POINT('',#4865);+#4865 = CARTESIAN_POINT('',(0.948480775301,1.125,0.367364817767));+#4866 = SURFACE_CURVE('',#4867,(#4872,#4883),.PCURVE_S1.);+#4867 = CIRCLE('',#4868,0.1);+#4868 = AXIS2_PLACEMENT_3D('',#4869,#4870,#4871);+#4869 = CARTESIAN_POINT('',(0.85,1.125,0.35));+#4870 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4871 = DIRECTION('',(0.,0.,1.));+#4872 = PCURVE('',#1883,#4873);+#4873 = DEFINITIONAL_REPRESENTATION('',(#4874),#4882);+#4874 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4875,#4876,#4877,#4878,+#4879,#4880,#4881),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#4897 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4898 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#4899 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#4900 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#4901 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#4902 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#4903 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#4904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4905 = PCURVE('',#1987,#4906);-#4906 = DEFINITIONAL_REPRESENTATION('',(#4907),#4911);-#4907 = LINE('',#4908,#4909);-#4908 = CARTESIAN_POINT('',(0.,0.));-#4909 = VECTOR('',#4910,1.);-#4910 = DIRECTION('',(1.,0.));-#4911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4912 = ORIENTED_EDGE('',*,*,#4913,.T.);-#4913 = EDGE_CURVE('',#4886,#4914,#4916,.T.);-#4914 = VERTEX_POINT('',#4915);-#4915 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583));-#4916 = SURFACE_CURVE('',#4917,(#4921,#4928),.PCURVE_S1.);-#4917 = LINE('',#4918,#4919);-#4918 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));-#4919 = VECTOR('',#4920,1.);-#4920 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#4921 = PCURVE('',#1905,#4922);-#4922 = DEFINITIONAL_REPRESENTATION('',(#4923),#4927);-#4923 = LINE('',#4924,#4925);-#4924 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#4925 = VECTOR('',#4926,1.);-#4926 = DIRECTION('',(-0.986721169868,-0.162423314012));-#4927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4928 = PCURVE('',#4929,#4934);-#4929 = PLANE('',#4930);-#4930 = AXIS2_PLACEMENT_3D('',#4931,#4932,#4933);-#4931 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));-#4932 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012)- );-#4933 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#4934 = DEFINITIONAL_REPRESENTATION('',(#4935),#4939);-#4935 = LINE('',#4936,#4937);-#4936 = CARTESIAN_POINT('',(0.,0.));-#4937 = VECTOR('',#4938,1.);-#4938 = DIRECTION('',(1.,1.051442023083E-33));-#4939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4940 = ORIENTED_EDGE('',*,*,#4941,.T.);-#4941 = EDGE_CURVE('',#4914,#4942,#4944,.T.);-#4942 = VERTEX_POINT('',#4943);-#4943 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));-#4944 = SURFACE_CURVE('',#4945,(#4950,#4957),.PCURVE_S1.);-#4945 = CIRCLE('',#4946,0.25);-#4946 = AXIS2_PLACEMENT_3D('',#4947,#4948,#4949);-#4947 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));-#4948 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#4949 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#4875 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4876 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#4877 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#4878 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#4879 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#4880 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#4881 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#4882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4883 = PCURVE('',#1965,#4884);+#4884 = DEFINITIONAL_REPRESENTATION('',(#4885),#4889);+#4885 = LINE('',#4886,#4887);+#4886 = CARTESIAN_POINT('',(0.,0.));+#4887 = VECTOR('',#4888,1.);+#4888 = DIRECTION('',(1.,0.));+#4889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4890 = ORIENTED_EDGE('',*,*,#4891,.T.);+#4891 = EDGE_CURVE('',#4864,#4892,#4894,.T.);+#4892 = VERTEX_POINT('',#4893);+#4893 = CARTESIAN_POINT('',(0.971430759818,1.125,0.206587955583));+#4894 = SURFACE_CURVE('',#4895,(#4899,#4906),.PCURVE_S1.);+#4895 = LINE('',#4896,#4897);+#4896 = CARTESIAN_POINT('',(0.948480775301,1.125,0.367364817767));+#4897 = VECTOR('',#4898,1.);+#4898 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#4899 = PCURVE('',#1883,#4900);+#4900 = DEFINITIONAL_REPRESENTATION('',(#4901),#4905);+#4901 = LINE('',#4902,#4903);+#4902 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#4903 = VECTOR('',#4904,1.);+#4904 = DIRECTION('',(-0.989965123745,-0.14131190243));+#4905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4906 = PCURVE('',#4907,#4912);+#4907 = PLANE('',#4908);+#4908 = AXIS2_PLACEMENT_3D('',#4909,#4910,#4911);+#4909 = CARTESIAN_POINT('',(0.948480775301,1.125,0.367364817767));+#4910 = DIRECTION('',(0.989965123745,1.099082073958E-16,0.14131190243));+#4911 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#4912 = DEFINITIONAL_REPRESENTATION('',(#4913),#4917);+#4913 = LINE('',#4914,#4915);+#4914 = CARTESIAN_POINT('',(0.,0.));+#4915 = VECTOR('',#4916,1.);+#4916 = DIRECTION('',(1.,1.42599261499E-33));+#4917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4918 = ORIENTED_EDGE('',*,*,#4919,.T.);+#4919 = EDGE_CURVE('',#4892,#4920,#4922,.T.);+#4920 = VERTEX_POINT('',#4921);+#4921 = CARTESIAN_POINT('',(1.217632698071,1.125,5.551115123126E-17));+#4922 = SURFACE_CURVE('',#4923,(#4928,#4935),.PCURVE_S1.);+#4923 = CIRCLE('',#4924,0.25);+#4924 = AXIS2_PLACEMENT_3D('',#4925,#4926,#4927);+#4925 = CARTESIAN_POINT('',(1.217632698071,1.125,0.25));+#4926 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4927 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#4950 = PCURVE('',#1905,#4951);-#4951 = DEFINITIONAL_REPRESENTATION('',(#4952),#4956);-#4952 = CIRCLE('',#4953,0.25);-#4953 = AXIS2_PLACEMENT_2D('',#4954,#4955);-#4954 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#4955 = DIRECTION('',(-0.173648177667,0.984807753012));-#4956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4957 = PCURVE('',#4958,#4963);-#4958 = CYLINDRICAL_SURFACE('',#4959,0.25);-#4959 = AXIS2_PLACEMENT_3D('',#4960,#4961,#4962);-#4960 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));-#4961 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#4962 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#4928 = PCURVE('',#1883,#4929);+#4929 = DEFINITIONAL_REPRESENTATION('',(#4930),#4934);+#4930 = CIRCLE('',#4931,0.25);+#4931 = AXIS2_PLACEMENT_2D('',#4932,#4933);+#4932 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#4933 = DIRECTION('',(-0.173648177667,0.984807753012));+#4934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4935 = PCURVE('',#4936,#4941);+#4936 = CYLINDRICAL_SURFACE('',#4937,0.25);+#4937 = AXIS2_PLACEMENT_3D('',#4938,#4939,#4940);+#4938 = CARTESIAN_POINT('',(1.217632698071,1.125,0.25));+#4939 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#4940 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#4963 = DEFINITIONAL_REPRESENTATION('',(#4964),#4968);-#4964 = LINE('',#4965,#4966);-#4965 = CARTESIAN_POINT('',(6.28318530718,0.));-#4966 = VECTOR('',#4967,1.);-#4967 = DIRECTION('',(-1.,0.));-#4968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4969 = ORIENTED_EDGE('',*,*,#4970,.T.);-#4970 = EDGE_CURVE('',#4942,#4971,#4973,.T.);-#4971 = VERTEX_POINT('',#4972);-#4972 = CARTESIAN_POINT('',(1.4,1.2,0.));-#4973 = SURFACE_CURVE('',#4974,(#4978,#4985),.PCURVE_S1.);-#4974 = LINE('',#4975,#4976);-#4975 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));-#4976 = VECTOR('',#4977,1.);-#4977 = DIRECTION('',(1.,1.110223024625E-16,0.));-#4978 = PCURVE('',#1905,#4979);-#4979 = DEFINITIONAL_REPRESENTATION('',(#4980),#4984);+#4941 = DEFINITIONAL_REPRESENTATION('',(#4942),#4946);+#4942 = LINE('',#4943,#4944);+#4943 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16));+#4944 = VECTOR('',#4945,1.);+#4945 = DIRECTION('',(-1.,-1.590277340732E-16));+#4946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4947 = ORIENTED_EDGE('',*,*,#4948,.T.);+#4948 = EDGE_CURVE('',#4920,#4949,#4951,.T.);+#4949 = VERTEX_POINT('',#4950);+#4950 = CARTESIAN_POINT('',(1.4,1.125,5.551115123126E-17));+#4951 = SURFACE_CURVE('',#4952,(#4956,#4963),.PCURVE_S1.);+#4952 = LINE('',#4953,#4954);+#4953 = CARTESIAN_POINT('',(1.217632698071,1.125,5.551115123126E-17));+#4954 = VECTOR('',#4955,1.);+#4955 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4956 = PCURVE('',#1883,#4957);+#4957 = DEFINITIONAL_REPRESENTATION('',(#4958),#4962);+#4958 = LINE('',#4959,#4960);+#4959 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#4960 = VECTOR('',#4961,1.);+#4961 = DIRECTION('',(0.,-1.));+#4962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4963 = PCURVE('',#4964,#4969);+#4964 = PLANE('',#4965);+#4965 = AXIS2_PLACEMENT_3D('',#4966,#4967,#4968);+#4966 = CARTESIAN_POINT('',(1.217632698071,1.125,5.551115123126E-17));+#4967 = DIRECTION('',(0.,0.,1.));+#4968 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4969 = DEFINITIONAL_REPRESENTATION('',(#4970),#4974);+#4970 = LINE('',#4971,#4972);+#4971 = CARTESIAN_POINT('',(0.,0.));+#4972 = VECTOR('',#4973,1.);+#4973 = DIRECTION('',(1.,0.));+#4974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4975 = ORIENTED_EDGE('',*,*,#4976,.T.);+#4976 = EDGE_CURVE('',#4949,#4977,#4979,.T.);+#4977 = VERTEX_POINT('',#4978);+#4978 = CARTESIAN_POINT('',(1.4,1.125,0.15));+#4979 = SURFACE_CURVE('',#4980,(#4984,#4991),.PCURVE_S1.); #4980 = LINE('',#4981,#4982);-#4981 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));+#4981 = CARTESIAN_POINT('',(1.4,1.125,5.551115123126E-17)); #4982 = VECTOR('',#4983,1.);-#4983 = DIRECTION('',(0.,-1.));-#4984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4985 = PCURVE('',#4986,#4991);-#4986 = PLANE('',#4987);-#4987 = AXIS2_PLACEMENT_3D('',#4988,#4989,#4990);-#4988 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));-#4989 = DIRECTION('',(0.,0.,1.));-#4990 = DIRECTION('',(1.,1.110223024625E-16,-0.));-#4991 = DEFINITIONAL_REPRESENTATION('',(#4992),#4996);-#4992 = LINE('',#4993,#4994);-#4993 = CARTESIAN_POINT('',(0.,0.));-#4994 = VECTOR('',#4995,1.);-#4995 = DIRECTION('',(1.,0.));-#4996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#4997 = ORIENTED_EDGE('',*,*,#4998,.T.);-#4998 = EDGE_CURVE('',#4971,#4999,#5001,.T.);-#4999 = VERTEX_POINT('',#5000);-#5000 = CARTESIAN_POINT('',(1.4,1.2,0.15));-#5001 = SURFACE_CURVE('',#5002,(#5006,#5013),.PCURVE_S1.);-#5002 = LINE('',#5003,#5004);-#5003 = CARTESIAN_POINT('',(1.4,1.2,0.));-#5004 = VECTOR('',#5005,1.);-#5005 = DIRECTION('',(0.,0.,1.));-#5006 = PCURVE('',#1905,#5007);-#5007 = DEFINITIONAL_REPRESENTATION('',(#5008),#5012);+#4983 = DIRECTION('',(0.,0.,1.));+#4984 = PCURVE('',#1883,#4985);+#4985 = DEFINITIONAL_REPRESENTATION('',(#4986),#4990);+#4986 = LINE('',#4987,#4988);+#4987 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#4988 = VECTOR('',#4989,1.);+#4989 = DIRECTION('',(1.,0.));+#4990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4991 = PCURVE('',#4992,#4997);+#4992 = PLANE('',#4993);+#4993 = AXIS2_PLACEMENT_3D('',#4994,#4995,#4996);+#4994 = CARTESIAN_POINT('',(1.4,1.125,5.551115123126E-17));+#4995 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4996 = DIRECTION('',(0.,0.,1.));+#4997 = DEFINITIONAL_REPRESENTATION('',(#4998),#5002);+#4998 = LINE('',#4999,#5000);+#4999 = CARTESIAN_POINT('',(0.,0.));+#5000 = VECTOR('',#5001,1.);+#5001 = DIRECTION('',(1.,0.));+#5002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5003 = ORIENTED_EDGE('',*,*,#5004,.T.);+#5004 = EDGE_CURVE('',#4977,#5005,#5007,.T.);+#5005 = VERTEX_POINT('',#5006);+#5006 = CARTESIAN_POINT('',(1.217632698071,1.125,0.15));+#5007 = SURFACE_CURVE('',#5008,(#5012,#5019),.PCURVE_S1.); #5008 = LINE('',#5009,#5010);-#5009 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));+#5009 = CARTESIAN_POINT('',(1.4,1.125,0.15)); #5010 = VECTOR('',#5011,1.);-#5011 = DIRECTION('',(1.,0.));-#5012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5013 = PCURVE('',#5014,#5019);-#5014 = PLANE('',#5015);-#5015 = AXIS2_PLACEMENT_3D('',#5016,#5017,#5018);-#5016 = CARTESIAN_POINT('',(1.4,1.2,0.));-#5017 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5018 = DIRECTION('',(0.,0.,1.));-#5019 = DEFINITIONAL_REPRESENTATION('',(#5020),#5024);-#5020 = LINE('',#5021,#5022);-#5021 = CARTESIAN_POINT('',(0.,0.));-#5022 = VECTOR('',#5023,1.);-#5023 = DIRECTION('',(1.,0.));-#5024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5025 = ORIENTED_EDGE('',*,*,#5026,.T.);-#5026 = EDGE_CURVE('',#4999,#5027,#5029,.T.);-#5027 = VERTEX_POINT('',#5028);-#5028 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15));-#5029 = SURFACE_CURVE('',#5030,(#5034,#5041),.PCURVE_S1.);-#5030 = LINE('',#5031,#5032);-#5031 = CARTESIAN_POINT('',(1.4,1.2,0.15));-#5032 = VECTOR('',#5033,1.);-#5033 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5034 = PCURVE('',#1905,#5035);-#5035 = DEFINITIONAL_REPRESENTATION('',(#5036),#5040);-#5036 = LINE('',#5037,#5038);-#5037 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#5038 = VECTOR('',#5039,1.);-#5039 = DIRECTION('',(0.,1.));-#5040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5041 = PCURVE('',#5042,#5047);-#5042 = PLANE('',#5043);-#5043 = AXIS2_PLACEMENT_3D('',#5044,#5045,#5046);-#5044 = CARTESIAN_POINT('',(1.4,1.2,0.15));-#5045 = DIRECTION('',(0.,0.,-1.));-#5046 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));-#5047 = DEFINITIONAL_REPRESENTATION('',(#5048),#5052);-#5048 = LINE('',#5049,#5050);-#5049 = CARTESIAN_POINT('',(-0.,0.));-#5050 = VECTOR('',#5051,1.);-#5051 = DIRECTION('',(1.,0.));-#5052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5053 = ORIENTED_EDGE('',*,*,#5054,.T.);-#5054 = EDGE_CURVE('',#5027,#5055,#5057,.T.);-#5055 = VERTEX_POINT('',#5056);-#5056 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));-#5057 = SURFACE_CURVE('',#5058,(#5063,#5074),.PCURVE_S1.);-#5058 = CIRCLE('',#5059,0.1);-#5059 = AXIS2_PLACEMENT_3D('',#5060,#5061,#5062);-#5060 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));-#5061 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5062 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5063 = PCURVE('',#1905,#5064);-#5064 = DEFINITIONAL_REPRESENTATION('',(#5065),#5073);-#5065 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5066,#5067,#5068,#5069,-#5070,#5071,#5072),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5011 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5012 = PCURVE('',#1883,#5013);+#5013 = DEFINITIONAL_REPRESENTATION('',(#5014),#5018);+#5014 = LINE('',#5015,#5016);+#5015 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#5016 = VECTOR('',#5017,1.);+#5017 = DIRECTION('',(0.,1.));+#5018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5019 = PCURVE('',#5020,#5025);+#5020 = PLANE('',#5021);+#5021 = AXIS2_PLACEMENT_3D('',#5022,#5023,#5024);+#5022 = CARTESIAN_POINT('',(1.4,1.125,0.15));+#5023 = DIRECTION('',(0.,0.,-1.));+#5024 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#5025 = DEFINITIONAL_REPRESENTATION('',(#5026),#5030);+#5026 = LINE('',#5027,#5028);+#5027 = CARTESIAN_POINT('',(-0.,0.));+#5028 = VECTOR('',#5029,1.);+#5029 = DIRECTION('',(1.,0.));+#5030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5031 = ORIENTED_EDGE('',*,*,#5032,.T.);+#5032 = EDGE_CURVE('',#5005,#5033,#5035,.T.);+#5033 = VERTEX_POINT('',#5034);+#5034 = CARTESIAN_POINT('',(1.11915192277,1.125,0.232635182233));+#5035 = SURFACE_CURVE('',#5036,(#5041,#5052),.PCURVE_S1.);+#5036 = CIRCLE('',#5037,0.1);+#5037 = AXIS2_PLACEMENT_3D('',#5038,#5039,#5040);+#5038 = CARTESIAN_POINT('',(1.217632698071,1.125,0.25));+#5039 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5040 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5041 = PCURVE('',#1883,#5042);+#5042 = DEFINITIONAL_REPRESENTATION('',(#5043),#5051);+#5043 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5044,#5045,#5046,#5047,+#5048,#5049,#5050),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5066 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5067 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#5068 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#5069 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#5070 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#5071 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#5072 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5074 = PCURVE('',#5075,#5080);-#5075 = CYLINDRICAL_SURFACE('',#5076,0.1);-#5076 = AXIS2_PLACEMENT_3D('',#5077,#5078,#5079);-#5077 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25));-#5078 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5079 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5080 = DEFINITIONAL_REPRESENTATION('',(#5081),#5085);-#5081 = LINE('',#5082,#5083);-#5082 = CARTESIAN_POINT('',(0.,0.));-#5083 = VECTOR('',#5084,1.);-#5084 = DIRECTION('',(1.,0.));-#5085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5086 = ORIENTED_EDGE('',*,*,#5087,.T.);-#5087 = EDGE_CURVE('',#5055,#5088,#5090,.T.);-#5088 = VERTEX_POINT('',#5089);-#5089 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417));-#5090 = SURFACE_CURVE('',#5091,(#5095,#5102),.PCURVE_S1.);-#5091 = LINE('',#5092,#5093);-#5092 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));-#5093 = VECTOR('',#5094,1.);-#5094 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));-#5095 = PCURVE('',#1905,#5096);-#5096 = DEFINITIONAL_REPRESENTATION('',(#5097),#5101);-#5097 = LINE('',#5098,#5099);-#5098 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#5099 = VECTOR('',#5100,1.);-#5100 = DIRECTION('',(0.986721169868,0.162423314012));-#5101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5102 = PCURVE('',#5103,#5108);-#5103 = PLANE('',#5104);-#5104 = AXIS2_PLACEMENT_3D('',#5105,#5106,#5107);-#5105 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));-#5106 = DIRECTION('',(-0.986721169868,-1.095480561672E-16,- -0.162423314012));-#5107 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));+#5044 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5045 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#5046 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#5047 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#5048 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#5049 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#5050 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5052 = PCURVE('',#5053,#5058);+#5053 = CYLINDRICAL_SURFACE('',#5054,0.1);+#5054 = AXIS2_PLACEMENT_3D('',#5055,#5056,#5057);+#5055 = CARTESIAN_POINT('',(1.217632698071,1.125,0.25));+#5056 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5057 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5058 = DEFINITIONAL_REPRESENTATION('',(#5059),#5063);+#5059 = LINE('',#5060,#5061);+#5060 = CARTESIAN_POINT('',(0.,0.));+#5061 = VECTOR('',#5062,1.);+#5062 = DIRECTION('',(1.,0.));+#5063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5064 = ORIENTED_EDGE('',*,*,#5065,.T.);+#5065 = EDGE_CURVE('',#5033,#5066,#5068,.T.);+#5066 = VERTEX_POINT('',#5067);+#5067 = CARTESIAN_POINT('',(1.096201938253,1.125,0.393412044417));+#5068 = SURFACE_CURVE('',#5069,(#5073,#5080),.PCURVE_S1.);+#5069 = LINE('',#5070,#5071);+#5070 = CARTESIAN_POINT('',(1.11915192277,1.125,0.232635182233));+#5071 = VECTOR('',#5072,1.);+#5072 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5073 = PCURVE('',#1883,#5074);+#5074 = DEFINITIONAL_REPRESENTATION('',(#5075),#5079);+#5075 = LINE('',#5076,#5077);+#5076 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#5077 = VECTOR('',#5078,1.);+#5078 = DIRECTION('',(0.989965123745,0.14131190243));+#5079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5080 = PCURVE('',#5081,#5086);+#5081 = PLANE('',#5082);+#5082 = AXIS2_PLACEMENT_3D('',#5083,#5084,#5085);+#5083 = CARTESIAN_POINT('',(1.11915192277,1.125,0.232635182233));+#5084 = DIRECTION('',(-0.989965123745,-1.099082073958E-16,-0.14131190243+ ));+#5085 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5086 = DEFINITIONAL_REPRESENTATION('',(#5087),#5091);+#5087 = LINE('',#5088,#5089);+#5088 = CARTESIAN_POINT('',(0.,0.));+#5089 = VECTOR('',#5090,1.);+#5090 = DIRECTION('',(1.,-1.42599261499E-33));+#5091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5092 = ORIENTED_EDGE('',*,*,#5093,.T.);+#5093 = EDGE_CURVE('',#5066,#2944,#5094,.T.);+#5094 = SURFACE_CURVE('',#5095,(#5100,#5107),.PCURVE_S1.);+#5095 = CIRCLE('',#5096,0.25);+#5096 = AXIS2_PLACEMENT_3D('',#5097,#5098,#5099);+#5097 = CARTESIAN_POINT('',(0.85,1.125,0.35));+#5098 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5099 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#5100 = PCURVE('',#1883,#5101);+#5101 = DEFINITIONAL_REPRESENTATION('',(#5102),#5106);+#5102 = CIRCLE('',#5103,0.25);+#5103 = AXIS2_PLACEMENT_2D('',#5104,#5105);+#5104 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#5105 = DIRECTION('',(0.173648177667,-0.984807753012));+#5106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5107 = PCURVE('',#2982,#5108); #5108 = DEFINITIONAL_REPRESENTATION('',(#5109),#5113); #5109 = LINE('',#5110,#5111);-#5110 = CARTESIAN_POINT('',(0.,0.));+#5110 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); #5111 = VECTOR('',#5112,1.);-#5112 = DIRECTION('',(1.,-1.051442023083E-33));+#5112 = DIRECTION('',(-1.,1.590277340732E-16)); #5113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5114 = ORIENTED_EDGE('',*,*,#5115,.T.);-#5115 = EDGE_CURVE('',#5088,#2966,#5116,.T.);-#5116 = SURFACE_CURVE('',#5117,(#5122,#5129),.PCURVE_S1.);-#5117 = CIRCLE('',#5118,0.25);-#5118 = AXIS2_PLACEMENT_3D('',#5119,#5120,#5121);-#5119 = CARTESIAN_POINT('',(0.85,1.2,0.65));-#5120 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5121 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#5122 = PCURVE('',#1905,#5123);-#5123 = DEFINITIONAL_REPRESENTATION('',(#5124),#5128);-#5124 = CIRCLE('',#5125,0.25);-#5125 = AXIS2_PLACEMENT_2D('',#5126,#5127);-#5126 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#5127 = DIRECTION('',(0.173648177667,-0.984807753012));-#5128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5129 = PCURVE('',#3004,#5130);+#5114 = ORIENTED_EDGE('',*,*,#2943,.T.);+#5115 = ADVANCED_FACE('',(#5116),#1965,.F.);+#5116 = FACE_BOUND('',#5117,.F.);+#5117 = EDGE_LOOP('',(#5118,#5119,#5147,#5168));+#5118 = ORIENTED_EDGE('',*,*,#1951,.T.);+#5119 = ORIENTED_EDGE('',*,*,#5120,.T.);+#5120 = EDGE_CURVE('',#1924,#5121,#5123,.T.);+#5121 = VERTEX_POINT('',#5122);+#5122 = CARTESIAN_POINT('',(0.948480775301,0.775,0.367364817767));+#5123 = SURFACE_CURVE('',#5124,(#5129,#5136),.PCURVE_S1.);+#5124 = CIRCLE('',#5125,0.1);+#5125 = AXIS2_PLACEMENT_3D('',#5126,#5127,#5128);+#5126 = CARTESIAN_POINT('',(0.85,0.775,0.35));+#5127 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5128 = DIRECTION('',(0.,0.,1.));+#5129 = PCURVE('',#1965,#5130); #5130 = DEFINITIONAL_REPRESENTATION('',(#5131),#5135); #5131 = LINE('',#5132,#5133);-#5132 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16));+#5132 = CARTESIAN_POINT('',(0.,-0.35)); #5133 = VECTOR('',#5134,1.);-#5134 = DIRECTION('',(-1.,1.590277340732E-16));+#5134 = DIRECTION('',(1.,0.)); #5135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5136 = ORIENTED_EDGE('',*,*,#2965,.T.);-#5137 = ADVANCED_FACE('',(#5138),#1987,.F.);-#5138 = FACE_BOUND('',#5139,.F.);-#5139 = EDGE_LOOP('',(#5140,#5141,#5169,#5190));-#5140 = ORIENTED_EDGE('',*,*,#1973,.T.);-#5141 = ORIENTED_EDGE('',*,*,#5142,.T.);-#5142 = EDGE_CURVE('',#1946,#5143,#5145,.T.);-#5143 = VERTEX_POINT('',#5144);-#5144 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767));-#5145 = SURFACE_CURVE('',#5146,(#5151,#5158),.PCURVE_S1.);-#5146 = CIRCLE('',#5147,0.1);-#5147 = AXIS2_PLACEMENT_3D('',#5148,#5149,#5150);-#5148 = CARTESIAN_POINT('',(0.85,0.7,0.65));-#5149 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5150 = DIRECTION('',(0.,0.,1.));-#5151 = PCURVE('',#1987,#5152);-#5152 = DEFINITIONAL_REPRESENTATION('',(#5153),#5157);-#5153 = LINE('',#5154,#5155);-#5154 = CARTESIAN_POINT('',(0.,-0.5));-#5155 = VECTOR('',#5156,1.);-#5156 = DIRECTION('',(1.,0.));-#5157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5158 = PCURVE('',#1961,#5159);-#5159 = DEFINITIONAL_REPRESENTATION('',(#5160),#5168);-#5160 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5161,#5162,#5163,#5164,-#5165,#5166,#5167),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5136 = PCURVE('',#1939,#5137);+#5137 = DEFINITIONAL_REPRESENTATION('',(#5138),#5146);+#5138 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5139,#5140,#5141,#5142,+#5143,#5144,#5145),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5161 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5162 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#5163 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#5164 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#5165 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#5166 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#5167 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5169 = ORIENTED_EDGE('',*,*,#5170,.F.);-#5170 = EDGE_CURVE('',#4886,#5143,#5171,.T.);-#5171 = SURFACE_CURVE('',#5172,(#5176,#5183),.PCURVE_S1.);-#5172 = LINE('',#5173,#5174);-#5173 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767));-#5174 = VECTOR('',#5175,1.);-#5175 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5176 = PCURVE('',#1987,#5177);-#5177 = DEFINITIONAL_REPRESENTATION('',(#5178),#5182);-#5178 = LINE('',#5179,#5180);-#5179 = CARTESIAN_POINT('',(1.396263401592,0.));-#5180 = VECTOR('',#5181,1.);-#5181 = DIRECTION('',(0.,-1.));-#5182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5183 = PCURVE('',#4929,#5184);-#5184 = DEFINITIONAL_REPRESENTATION('',(#5185),#5189);-#5185 = LINE('',#5186,#5187);-#5186 = CARTESIAN_POINT('',(0.,0.));-#5187 = VECTOR('',#5188,1.);-#5188 = DIRECTION('',(1.187800808667E-29,-1.));-#5189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5190 = ORIENTED_EDGE('',*,*,#4885,.F.);-#5191 = ADVANCED_FACE('',(#5192),#1961,.T.);-#5192 = FACE_BOUND('',#5193,.T.);-#5193 = EDGE_LOOP('',(#5194,#5195,#5196,#5197,#5220,#5244,#5267,#5290,- #5313,#5341,#5364,#5386));-#5194 = ORIENTED_EDGE('',*,*,#2002,.F.);-#5195 = ORIENTED_EDGE('',*,*,#1945,.T.);-#5196 = ORIENTED_EDGE('',*,*,#5142,.T.);-#5197 = ORIENTED_EDGE('',*,*,#5198,.T.);-#5198 = EDGE_CURVE('',#5143,#5199,#5201,.T.);-#5199 = VERTEX_POINT('',#5200);-#5200 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583));-#5201 = SURFACE_CURVE('',#5202,(#5206,#5213),.PCURVE_S1.);-#5202 = LINE('',#5203,#5204);-#5203 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767));-#5204 = VECTOR('',#5205,1.);-#5205 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#5206 = PCURVE('',#1961,#5207);-#5207 = DEFINITIONAL_REPRESENTATION('',(#5208),#5212);-#5208 = LINE('',#5209,#5210);-#5209 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#5210 = VECTOR('',#5211,1.);-#5211 = DIRECTION('',(-0.986721169868,-0.162423314012));-#5212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5213 = PCURVE('',#4929,#5214);-#5214 = DEFINITIONAL_REPRESENTATION('',(#5215),#5219);-#5215 = LINE('',#5216,#5217);-#5216 = CARTESIAN_POINT('',(-9.016305147594E-18,-0.5));-#5217 = VECTOR('',#5218,1.);-#5218 = DIRECTION('',(1.,1.051442023083E-33));-#5219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5220 = ORIENTED_EDGE('',*,*,#5221,.T.);-#5221 = EDGE_CURVE('',#5199,#5222,#5224,.T.);-#5222 = VERTEX_POINT('',#5223);-#5223 = CARTESIAN_POINT('',(1.270530792283,0.7,0.));-#5224 = SURFACE_CURVE('',#5225,(#5230,#5237),.PCURVE_S1.);-#5225 = CIRCLE('',#5226,0.25);-#5226 = AXIS2_PLACEMENT_3D('',#5227,#5228,#5229);-#5227 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25));-#5228 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5229 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#5139 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5140 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#5141 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#5142 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#5143 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#5144 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#5145 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5147 = ORIENTED_EDGE('',*,*,#5148,.F.);+#5148 = EDGE_CURVE('',#4864,#5121,#5149,.T.);+#5149 = SURFACE_CURVE('',#5150,(#5154,#5161),.PCURVE_S1.);+#5150 = LINE('',#5151,#5152);+#5151 = CARTESIAN_POINT('',(0.948480775301,1.125,0.367364817767));+#5152 = VECTOR('',#5153,1.);+#5153 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5154 = PCURVE('',#1965,#5155);+#5155 = DEFINITIONAL_REPRESENTATION('',(#5156),#5160);+#5156 = LINE('',#5157,#5158);+#5157 = CARTESIAN_POINT('',(1.396263401592,0.));+#5158 = VECTOR('',#5159,1.);+#5159 = DIRECTION('',(0.,-1.));+#5160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5161 = PCURVE('',#4907,#5162);+#5162 = DEFINITIONAL_REPRESENTATION('',(#5163),#5167);+#5163 = LINE('',#5164,#5165);+#5164 = CARTESIAN_POINT('',(0.,0.));+#5165 = VECTOR('',#5166,1.);+#5166 = DIRECTION('',(-2.52495221085E-29,-1.));+#5167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5168 = ORIENTED_EDGE('',*,*,#4863,.F.);+#5169 = ADVANCED_FACE('',(#5170),#1939,.T.);+#5170 = FACE_BOUND('',#5171,.T.);+#5171 = EDGE_LOOP('',(#5172,#5173,#5174,#5175,#5198,#5222,#5245,#5268,+ #5291,#5319,#5342,#5364));+#5172 = ORIENTED_EDGE('',*,*,#1980,.F.);+#5173 = ORIENTED_EDGE('',*,*,#1923,.T.);+#5174 = ORIENTED_EDGE('',*,*,#5120,.T.);+#5175 = ORIENTED_EDGE('',*,*,#5176,.T.);+#5176 = EDGE_CURVE('',#5121,#5177,#5179,.T.);+#5177 = VERTEX_POINT('',#5178);+#5178 = CARTESIAN_POINT('',(0.971430759818,0.775,0.206587955583));+#5179 = SURFACE_CURVE('',#5180,(#5184,#5191),.PCURVE_S1.);+#5180 = LINE('',#5181,#5182);+#5181 = CARTESIAN_POINT('',(0.948480775301,0.775,0.367364817767));+#5182 = VECTOR('',#5183,1.);+#5183 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#5184 = PCURVE('',#1939,#5185);+#5185 = DEFINITIONAL_REPRESENTATION('',(#5186),#5190);+#5186 = LINE('',#5187,#5188);+#5187 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#5188 = VECTOR('',#5189,1.);+#5189 = DIRECTION('',(-0.989965123745,-0.14131190243));+#5190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5191 = PCURVE('',#4907,#5192);+#5192 = DEFINITIONAL_REPRESENTATION('',(#5193),#5197);+#5193 = LINE('',#5194,#5195);+#5194 = CARTESIAN_POINT('',(-5.491070470606E-18,-0.35));+#5195 = VECTOR('',#5196,1.);+#5196 = DIRECTION('',(1.,1.42599261499E-33));+#5197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5198 = ORIENTED_EDGE('',*,*,#5199,.T.);+#5199 = EDGE_CURVE('',#5177,#5200,#5202,.T.);+#5200 = VERTEX_POINT('',#5201);+#5201 = CARTESIAN_POINT('',(1.217632698071,0.775,5.551115123126E-17));+#5202 = SURFACE_CURVE('',#5203,(#5208,#5215),.PCURVE_S1.);+#5203 = CIRCLE('',#5204,0.25);+#5204 = AXIS2_PLACEMENT_3D('',#5205,#5206,#5207);+#5205 = CARTESIAN_POINT('',(1.217632698071,0.775,0.25));+#5206 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5207 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#5230 = PCURVE('',#1961,#5231);-#5231 = DEFINITIONAL_REPRESENTATION('',(#5232),#5236);-#5232 = CIRCLE('',#5233,0.25);-#5233 = AXIS2_PLACEMENT_2D('',#5234,#5235);-#5234 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#5235 = DIRECTION('',(-0.173648177667,0.984807753012));-#5236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5237 = PCURVE('',#4958,#5238);-#5238 = DEFINITIONAL_REPRESENTATION('',(#5239),#5243);-#5239 = LINE('',#5240,#5241);-#5240 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#5241 = VECTOR('',#5242,1.);-#5242 = DIRECTION('',(-1.,0.));-#5243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5244 = ORIENTED_EDGE('',*,*,#5245,.T.);-#5245 = EDGE_CURVE('',#5222,#5246,#5248,.T.);-#5246 = VERTEX_POINT('',#5247);-#5247 = CARTESIAN_POINT('',(1.4,0.7,0.));-#5248 = SURFACE_CURVE('',#5249,(#5253,#5260),.PCURVE_S1.);-#5249 = LINE('',#5250,#5251);-#5250 = CARTESIAN_POINT('',(1.270530792283,0.7,0.));-#5251 = VECTOR('',#5252,1.);-#5252 = DIRECTION('',(1.,1.110223024625E-16,0.));-#5253 = PCURVE('',#1961,#5254);-#5254 = DEFINITIONAL_REPRESENTATION('',(#5255),#5259);-#5255 = LINE('',#5256,#5257);-#5256 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));-#5257 = VECTOR('',#5258,1.);-#5258 = DIRECTION('',(0.,-1.));-#5259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5260 = PCURVE('',#4986,#5261);-#5261 = DEFINITIONAL_REPRESENTATION('',(#5262),#5266);-#5262 = LINE('',#5263,#5264);-#5263 = CARTESIAN_POINT('',(-5.551115123125E-17,-0.5));-#5264 = VECTOR('',#5265,1.);-#5265 = DIRECTION('',(1.,0.));-#5266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5267 = ORIENTED_EDGE('',*,*,#5268,.T.);-#5268 = EDGE_CURVE('',#5246,#5269,#5271,.T.);-#5269 = VERTEX_POINT('',#5270);-#5270 = CARTESIAN_POINT('',(1.4,0.7,0.15));-#5271 = SURFACE_CURVE('',#5272,(#5276,#5283),.PCURVE_S1.);-#5272 = LINE('',#5273,#5274);-#5273 = CARTESIAN_POINT('',(1.4,0.7,0.));-#5274 = VECTOR('',#5275,1.);-#5275 = DIRECTION('',(0.,0.,1.));-#5276 = PCURVE('',#1961,#5277);-#5277 = DEFINITIONAL_REPRESENTATION('',(#5278),#5282);-#5278 = LINE('',#5279,#5280);-#5279 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));-#5280 = VECTOR('',#5281,1.);-#5281 = DIRECTION('',(1.,0.));-#5282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5283 = PCURVE('',#5014,#5284);-#5284 = DEFINITIONAL_REPRESENTATION('',(#5285),#5289);-#5285 = LINE('',#5286,#5287);-#5286 = CARTESIAN_POINT('',(0.,-0.5));-#5287 = VECTOR('',#5288,1.);-#5288 = DIRECTION('',(1.,0.));-#5289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5290 = ORIENTED_EDGE('',*,*,#5291,.T.);-#5291 = EDGE_CURVE('',#5269,#5292,#5294,.T.);-#5292 = VERTEX_POINT('',#5293);-#5293 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15));-#5294 = SURFACE_CURVE('',#5295,(#5299,#5306),.PCURVE_S1.);-#5295 = LINE('',#5296,#5297);-#5296 = CARTESIAN_POINT('',(1.4,0.7,0.15));-#5297 = VECTOR('',#5298,1.);-#5298 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5299 = PCURVE('',#1961,#5300);-#5300 = DEFINITIONAL_REPRESENTATION('',(#5301),#5305);-#5301 = LINE('',#5302,#5303);-#5302 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#5303 = VECTOR('',#5304,1.);-#5304 = DIRECTION('',(0.,1.));-#5305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5306 = PCURVE('',#5042,#5307);-#5307 = DEFINITIONAL_REPRESENTATION('',(#5308),#5312);-#5308 = LINE('',#5309,#5310);-#5309 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#5310 = VECTOR('',#5311,1.);-#5311 = DIRECTION('',(1.,0.));-#5312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5313 = ORIENTED_EDGE('',*,*,#5314,.T.);-#5314 = EDGE_CURVE('',#5292,#5315,#5317,.T.);-#5315 = VERTEX_POINT('',#5316);-#5316 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233));-#5317 = SURFACE_CURVE('',#5318,(#5323,#5334),.PCURVE_S1.);-#5318 = CIRCLE('',#5319,0.1);-#5319 = AXIS2_PLACEMENT_3D('',#5320,#5321,#5322);-#5320 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25));-#5321 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5322 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5323 = PCURVE('',#1961,#5324);-#5324 = DEFINITIONAL_REPRESENTATION('',(#5325),#5333);-#5325 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5326,#5327,#5328,#5329,-#5330,#5331,#5332),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5208 = PCURVE('',#1939,#5209);+#5209 = DEFINITIONAL_REPRESENTATION('',(#5210),#5214);+#5210 = CIRCLE('',#5211,0.25);+#5211 = AXIS2_PLACEMENT_2D('',#5212,#5213);+#5212 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#5213 = DIRECTION('',(-0.173648177667,0.984807753012));+#5214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5215 = PCURVE('',#4936,#5216);+#5216 = DEFINITIONAL_REPRESENTATION('',(#5217),#5221);+#5217 = LINE('',#5218,#5219);+#5218 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#5219 = VECTOR('',#5220,1.);+#5220 = DIRECTION('',(-1.,0.));+#5221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5222 = ORIENTED_EDGE('',*,*,#5223,.T.);+#5223 = EDGE_CURVE('',#5200,#5224,#5226,.T.);+#5224 = VERTEX_POINT('',#5225);+#5225 = CARTESIAN_POINT('',(1.4,0.775,5.551115123126E-17));+#5226 = SURFACE_CURVE('',#5227,(#5231,#5238),.PCURVE_S1.);+#5227 = LINE('',#5228,#5229);+#5228 = CARTESIAN_POINT('',(1.217632698071,0.775,5.551115123126E-17));+#5229 = VECTOR('',#5230,1.);+#5230 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5231 = PCURVE('',#1939,#5232);+#5232 = DEFINITIONAL_REPRESENTATION('',(#5233),#5237);+#5233 = LINE('',#5234,#5235);+#5234 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#5235 = VECTOR('',#5236,1.);+#5236 = DIRECTION('',(0.,-1.));+#5237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5238 = PCURVE('',#4964,#5239);+#5239 = DEFINITIONAL_REPRESENTATION('',(#5240),#5244);+#5240 = LINE('',#5241,#5242);+#5241 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35));+#5242 = VECTOR('',#5243,1.);+#5243 = DIRECTION('',(1.,0.));+#5244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5245 = ORIENTED_EDGE('',*,*,#5246,.T.);+#5246 = EDGE_CURVE('',#5224,#5247,#5249,.T.);+#5247 = VERTEX_POINT('',#5248);+#5248 = CARTESIAN_POINT('',(1.4,0.775,0.15));+#5249 = SURFACE_CURVE('',#5250,(#5254,#5261),.PCURVE_S1.);+#5250 = LINE('',#5251,#5252);+#5251 = CARTESIAN_POINT('',(1.4,0.775,5.551115123126E-17));+#5252 = VECTOR('',#5253,1.);+#5253 = DIRECTION('',(0.,0.,1.));+#5254 = PCURVE('',#1939,#5255);+#5255 = DEFINITIONAL_REPRESENTATION('',(#5256),#5260);+#5256 = LINE('',#5257,#5258);+#5257 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#5258 = VECTOR('',#5259,1.);+#5259 = DIRECTION('',(1.,0.));+#5260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5261 = PCURVE('',#4992,#5262);+#5262 = DEFINITIONAL_REPRESENTATION('',(#5263),#5267);+#5263 = LINE('',#5264,#5265);+#5264 = CARTESIAN_POINT('',(0.,-0.35));+#5265 = VECTOR('',#5266,1.);+#5266 = DIRECTION('',(1.,0.));+#5267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5268 = ORIENTED_EDGE('',*,*,#5269,.T.);+#5269 = EDGE_CURVE('',#5247,#5270,#5272,.T.);+#5270 = VERTEX_POINT('',#5271);+#5271 = CARTESIAN_POINT('',(1.217632698071,0.775,0.15));+#5272 = SURFACE_CURVE('',#5273,(#5277,#5284),.PCURVE_S1.);+#5273 = LINE('',#5274,#5275);+#5274 = CARTESIAN_POINT('',(1.4,0.775,0.15));+#5275 = VECTOR('',#5276,1.);+#5276 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5277 = PCURVE('',#1939,#5278);+#5278 = DEFINITIONAL_REPRESENTATION('',(#5279),#5283);+#5279 = LINE('',#5280,#5281);+#5280 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#5281 = VECTOR('',#5282,1.);+#5282 = DIRECTION('',(0.,1.));+#5283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5284 = PCURVE('',#5020,#5285);+#5285 = DEFINITIONAL_REPRESENTATION('',(#5286),#5290);+#5286 = LINE('',#5287,#5288);+#5287 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#5288 = VECTOR('',#5289,1.);+#5289 = DIRECTION('',(1.,0.));+#5290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5291 = ORIENTED_EDGE('',*,*,#5292,.T.);+#5292 = EDGE_CURVE('',#5270,#5293,#5295,.T.);+#5293 = VERTEX_POINT('',#5294);+#5294 = CARTESIAN_POINT('',(1.11915192277,0.775,0.232635182233));+#5295 = SURFACE_CURVE('',#5296,(#5301,#5312),.PCURVE_S1.);+#5296 = CIRCLE('',#5297,0.1);+#5297 = AXIS2_PLACEMENT_3D('',#5298,#5299,#5300);+#5298 = CARTESIAN_POINT('',(1.217632698071,0.775,0.25));+#5299 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5300 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5301 = PCURVE('',#1939,#5302);+#5302 = DEFINITIONAL_REPRESENTATION('',(#5303),#5311);+#5303 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5304,#5305,#5306,#5307,+#5308,#5309,#5310),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5326 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5327 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#5328 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#5329 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#5330 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#5331 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#5332 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5334 = PCURVE('',#5075,#5335);-#5335 = DEFINITIONAL_REPRESENTATION('',(#5336),#5340);-#5336 = LINE('',#5337,#5338);-#5337 = CARTESIAN_POINT('',(0.,-0.5));-#5338 = VECTOR('',#5339,1.);-#5339 = DIRECTION('',(1.,0.));-#5340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5341 = ORIENTED_EDGE('',*,*,#5342,.T.);-#5342 = EDGE_CURVE('',#5315,#5343,#5345,.T.);-#5343 = VERTEX_POINT('',#5344);-#5344 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417));-#5345 = SURFACE_CURVE('',#5346,(#5350,#5357),.PCURVE_S1.);-#5346 = LINE('',#5347,#5348);-#5347 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233));-#5348 = VECTOR('',#5349,1.);-#5349 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));-#5350 = PCURVE('',#1961,#5351);+#5304 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5305 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#5306 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#5307 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#5308 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#5309 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#5310 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5312 = PCURVE('',#5053,#5313);+#5313 = DEFINITIONAL_REPRESENTATION('',(#5314),#5318);+#5314 = LINE('',#5315,#5316);+#5315 = CARTESIAN_POINT('',(0.,-0.35));+#5316 = VECTOR('',#5317,1.);+#5317 = DIRECTION('',(1.,0.));+#5318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5319 = ORIENTED_EDGE('',*,*,#5320,.T.);+#5320 = EDGE_CURVE('',#5293,#5321,#5323,.T.);+#5321 = VERTEX_POINT('',#5322);+#5322 = CARTESIAN_POINT('',(1.096201938253,0.775,0.393412044417));+#5323 = SURFACE_CURVE('',#5324,(#5328,#5335),.PCURVE_S1.);+#5324 = LINE('',#5325,#5326);+#5325 = CARTESIAN_POINT('',(1.11915192277,0.775,0.232635182233));+#5326 = VECTOR('',#5327,1.);+#5327 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5328 = PCURVE('',#1939,#5329);+#5329 = DEFINITIONAL_REPRESENTATION('',(#5330),#5334);+#5330 = LINE('',#5331,#5332);+#5331 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#5332 = VECTOR('',#5333,1.);+#5333 = DIRECTION('',(0.989965123745,0.14131190243));+#5334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5335 = PCURVE('',#5081,#5336);+#5336 = DEFINITIONAL_REPRESENTATION('',(#5337),#5341);+#5337 = LINE('',#5338,#5339);+#5338 = CARTESIAN_POINT('',(5.491070470606E-18,-0.35));+#5339 = VECTOR('',#5340,1.);+#5340 = DIRECTION('',(1.,-1.42599261499E-33));+#5341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5342 = ORIENTED_EDGE('',*,*,#5343,.T.);+#5343 = EDGE_CURVE('',#5321,#2967,#5344,.T.);+#5344 = SURFACE_CURVE('',#5345,(#5350,#5357),.PCURVE_S1.);+#5345 = CIRCLE('',#5346,0.25);+#5346 = AXIS2_PLACEMENT_3D('',#5347,#5348,#5349);+#5347 = CARTESIAN_POINT('',(0.85,0.775,0.35));+#5348 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5349 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#5350 = PCURVE('',#1939,#5351); #5351 = DEFINITIONAL_REPRESENTATION('',(#5352),#5356);-#5352 = LINE('',#5353,#5354);-#5353 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#5354 = VECTOR('',#5355,1.);-#5355 = DIRECTION('',(0.986721169868,0.162423314012));+#5352 = CIRCLE('',#5353,0.25);+#5353 = AXIS2_PLACEMENT_2D('',#5354,#5355);+#5354 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#5355 = DIRECTION('',(0.173648177667,-0.984807753012)); #5356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5357 = PCURVE('',#5103,#5358);+#5357 = PCURVE('',#2982,#5358); #5358 = DEFINITIONAL_REPRESENTATION('',(#5359),#5363); #5359 = LINE('',#5360,#5361);-#5360 = CARTESIAN_POINT('',(9.016305147594E-18,-0.5));+#5360 = CARTESIAN_POINT('',(6.28318530718,-0.35)); #5361 = VECTOR('',#5362,1.);-#5362 = DIRECTION('',(1.,-1.051442023083E-33));+#5362 = DIRECTION('',(-1.,0.)); #5363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#5364 = ORIENTED_EDGE('',*,*,#5365,.T.);-#5365 = EDGE_CURVE('',#5343,#2989,#5366,.T.);-#5366 = SURFACE_CURVE('',#5367,(#5372,#5379),.PCURVE_S1.);-#5367 = CIRCLE('',#5368,0.25);-#5368 = AXIS2_PLACEMENT_3D('',#5369,#5370,#5371);-#5369 = CARTESIAN_POINT('',(0.85,0.7,0.65));-#5370 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5371 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#5372 = PCURVE('',#1961,#5373);-#5373 = DEFINITIONAL_REPRESENTATION('',(#5374),#5378);-#5374 = CIRCLE('',#5375,0.25);-#5375 = AXIS2_PLACEMENT_2D('',#5376,#5377);-#5376 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#5377 = DIRECTION('',(0.173648177667,-0.984807753012));-#5378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5379 = PCURVE('',#3004,#5380);-#5380 = DEFINITIONAL_REPRESENTATION('',(#5381),#5385);-#5381 = LINE('',#5382,#5383);-#5382 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#5383 = VECTOR('',#5384,1.);-#5384 = DIRECTION('',(-1.,0.));-#5385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5386 = ORIENTED_EDGE('',*,*,#3016,.T.);-#5387 = ADVANCED_FACE('',(#5388),#2068,.F.);-#5388 = FACE_BOUND('',#5389,.F.);-#5389 = EDGE_LOOP('',(#5390,#5391,#5392,#5413));-#5390 = ORIENTED_EDGE('',*,*,#3037,.F.);-#5391 = ORIENTED_EDGE('',*,*,#2054,.T.);-#5392 = ORIENTED_EDGE('',*,*,#5393,.T.);-#5393 = EDGE_CURVE('',#2027,#2841,#5394,.T.);-#5394 = SURFACE_CURVE('',#5395,(#5399,#5406),.PCURVE_S1.);-#5395 = LINE('',#5396,#5397);-#5396 = CARTESIAN_POINT('',(0.85,-0.7,0.9));-#5397 = VECTOR('',#5398,1.);-#5398 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5399 = PCURVE('',#2068,#5400);-#5400 = DEFINITIONAL_REPRESENTATION('',(#5401),#5405);-#5401 = LINE('',#5402,#5403);-#5402 = CARTESIAN_POINT('',(0.85,2.1375));-#5403 = VECTOR('',#5404,1.);-#5404 = DIRECTION('',(-1.,-4.08998344385E-17));-#5405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5406 = PCURVE('',#2879,#5407);-#5407 = DEFINITIONAL_REPRESENTATION('',(#5408),#5412);-#5408 = LINE('',#5409,#5410);-#5409 = CARTESIAN_POINT('',(-0.,0.));-#5410 = VECTOR('',#5411,1.);-#5411 = DIRECTION('',(1.,0.));-#5412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5413 = ORIENTED_EDGE('',*,*,#2840,.F.);-#5414 = ADVANCED_FACE('',(#5415),#2042,.F.);-#5415 = FACE_BOUND('',#5416,.F.);-#5416 = EDGE_LOOP('',(#5417,#5418,#5419,#5447,#5475,#5504,#5532,#5560,- #5588,#5621,#5649,#5678));-#5417 = ORIENTED_EDGE('',*,*,#2026,.F.);-#5418 = ORIENTED_EDGE('',*,*,#2083,.T.);-#5419 = ORIENTED_EDGE('',*,*,#5420,.T.);-#5420 = EDGE_CURVE('',#2084,#5421,#5423,.T.);-#5421 = VERTEX_POINT('',#5422);-#5422 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));-#5423 = SURFACE_CURVE('',#5424,(#5429,#5440),.PCURVE_S1.);-#5424 = CIRCLE('',#5425,0.1);-#5425 = AXIS2_PLACEMENT_3D('',#5426,#5427,#5428);-#5426 = CARTESIAN_POINT('',(0.85,-0.7,0.65));-#5427 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5428 = DIRECTION('',(0.,0.,1.));-#5429 = PCURVE('',#2042,#5430);-#5430 = DEFINITIONAL_REPRESENTATION('',(#5431),#5439);-#5431 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5432,#5433,#5434,#5435,-#5436,#5437,#5438),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5364 = ORIENTED_EDGE('',*,*,#2994,.T.);+#5365 = ADVANCED_FACE('',(#5366),#2046,.F.);+#5366 = FACE_BOUND('',#5367,.F.);+#5367 = EDGE_LOOP('',(#5368,#5369,#5370,#5391));+#5368 = ORIENTED_EDGE('',*,*,#3015,.F.);+#5369 = ORIENTED_EDGE('',*,*,#2032,.T.);+#5370 = ORIENTED_EDGE('',*,*,#5371,.T.);+#5371 = EDGE_CURVE('',#2005,#2819,#5372,.T.);+#5372 = SURFACE_CURVE('',#5373,(#5377,#5384),.PCURVE_S1.);+#5373 = LINE('',#5374,#5375);+#5374 = CARTESIAN_POINT('',(0.85,-0.775,0.6));+#5375 = VECTOR('',#5376,1.);+#5376 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5377 = PCURVE('',#2046,#5378);+#5378 = DEFINITIONAL_REPRESENTATION('',(#5379),#5383);+#5379 = LINE('',#5380,#5381);+#5380 = CARTESIAN_POINT('',(0.85,2.2125));+#5381 = VECTOR('',#5382,1.);+#5382 = DIRECTION('',(-1.,-4.08998344385E-17));+#5383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5384 = PCURVE('',#2857,#5385);+#5385 = DEFINITIONAL_REPRESENTATION('',(#5386),#5390);+#5386 = LINE('',#5387,#5388);+#5387 = CARTESIAN_POINT('',(-0.,0.));+#5388 = VECTOR('',#5389,1.);+#5389 = DIRECTION('',(1.,0.));+#5390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5391 = ORIENTED_EDGE('',*,*,#2818,.F.);+#5392 = ADVANCED_FACE('',(#5393),#2020,.F.);+#5393 = FACE_BOUND('',#5394,.F.);+#5394 = EDGE_LOOP('',(#5395,#5396,#5397,#5425,#5453,#5482,#5510,#5538,+ #5566,#5599,#5627,#5656));+#5395 = ORIENTED_EDGE('',*,*,#2004,.F.);+#5396 = ORIENTED_EDGE('',*,*,#2061,.T.);+#5397 = ORIENTED_EDGE('',*,*,#5398,.T.);+#5398 = EDGE_CURVE('',#2062,#5399,#5401,.T.);+#5399 = VERTEX_POINT('',#5400);+#5400 = CARTESIAN_POINT('',(0.948480775301,-0.775,0.367364817767));+#5401 = SURFACE_CURVE('',#5402,(#5407,#5418),.PCURVE_S1.);+#5402 = CIRCLE('',#5403,0.1);+#5403 = AXIS2_PLACEMENT_3D('',#5404,#5405,#5406);+#5404 = CARTESIAN_POINT('',(0.85,-0.775,0.35));+#5405 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5406 = DIRECTION('',(0.,0.,1.));+#5407 = PCURVE('',#2020,#5408);+#5408 = DEFINITIONAL_REPRESENTATION('',(#5409),#5417);+#5409 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5410,#5411,#5412,#5413,+#5414,#5415,#5416),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5432 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5433 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#5434 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#5435 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#5436 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#5437 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#5438 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5440 = PCURVE('',#2149,#5441);-#5441 = DEFINITIONAL_REPRESENTATION('',(#5442),#5446);-#5442 = LINE('',#5443,#5444);-#5443 = CARTESIAN_POINT('',(0.,0.));-#5444 = VECTOR('',#5445,1.);-#5445 = DIRECTION('',(1.,0.));-#5446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5447 = ORIENTED_EDGE('',*,*,#5448,.T.);-#5448 = EDGE_CURVE('',#5421,#5449,#5451,.T.);-#5449 = VERTEX_POINT('',#5450);-#5450 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583));-#5451 = SURFACE_CURVE('',#5452,(#5456,#5463),.PCURVE_S1.);-#5452 = LINE('',#5453,#5454);-#5453 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));-#5454 = VECTOR('',#5455,1.);-#5455 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#5456 = PCURVE('',#2042,#5457);-#5457 = DEFINITIONAL_REPRESENTATION('',(#5458),#5462);-#5458 = LINE('',#5459,#5460);-#5459 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#5460 = VECTOR('',#5461,1.);-#5461 = DIRECTION('',(-0.986721169868,-0.162423314012));-#5462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5463 = PCURVE('',#5464,#5469);-#5464 = PLANE('',#5465);-#5465 = AXIS2_PLACEMENT_3D('',#5466,#5467,#5468);-#5466 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));-#5467 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012)- );-#5468 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#5469 = DEFINITIONAL_REPRESENTATION('',(#5470),#5474);-#5470 = LINE('',#5471,#5472);-#5471 = CARTESIAN_POINT('',(0.,0.));-#5472 = VECTOR('',#5473,1.);-#5473 = DIRECTION('',(1.,1.051442023083E-33));-#5474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5475 = ORIENTED_EDGE('',*,*,#5476,.T.);-#5476 = EDGE_CURVE('',#5449,#5477,#5479,.T.);-#5477 = VERTEX_POINT('',#5478);-#5478 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));-#5479 = SURFACE_CURVE('',#5480,(#5485,#5492),.PCURVE_S1.);-#5480 = CIRCLE('',#5481,0.25);-#5481 = AXIS2_PLACEMENT_3D('',#5482,#5483,#5484);-#5482 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));-#5483 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5484 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#5410 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5411 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#5412 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#5413 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#5414 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#5415 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#5416 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5418 = PCURVE('',#2127,#5419);+#5419 = DEFINITIONAL_REPRESENTATION('',(#5420),#5424);+#5420 = LINE('',#5421,#5422);+#5421 = CARTESIAN_POINT('',(0.,0.));+#5422 = VECTOR('',#5423,1.);+#5423 = DIRECTION('',(1.,0.));+#5424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5425 = ORIENTED_EDGE('',*,*,#5426,.T.);+#5426 = EDGE_CURVE('',#5399,#5427,#5429,.T.);+#5427 = VERTEX_POINT('',#5428);+#5428 = CARTESIAN_POINT('',(0.971430759818,-0.775,0.206587955583));+#5429 = SURFACE_CURVE('',#5430,(#5434,#5441),.PCURVE_S1.);+#5430 = LINE('',#5431,#5432);+#5431 = CARTESIAN_POINT('',(0.948480775301,-0.775,0.367364817767));+#5432 = VECTOR('',#5433,1.);+#5433 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#5434 = PCURVE('',#2020,#5435);+#5435 = DEFINITIONAL_REPRESENTATION('',(#5436),#5440);+#5436 = LINE('',#5437,#5438);+#5437 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#5438 = VECTOR('',#5439,1.);+#5439 = DIRECTION('',(-0.989965123745,-0.14131190243));+#5440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5441 = PCURVE('',#5442,#5447);+#5442 = PLANE('',#5443);+#5443 = AXIS2_PLACEMENT_3D('',#5444,#5445,#5446);+#5444 = CARTESIAN_POINT('',(0.948480775301,-0.775,0.367364817767));+#5445 = DIRECTION('',(0.989965123745,1.099082073958E-16,0.14131190243));+#5446 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#5447 = DEFINITIONAL_REPRESENTATION('',(#5448),#5452);+#5448 = LINE('',#5449,#5450);+#5449 = CARTESIAN_POINT('',(0.,0.));+#5450 = VECTOR('',#5451,1.);+#5451 = DIRECTION('',(1.,1.42599261499E-33));+#5452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5453 = ORIENTED_EDGE('',*,*,#5454,.T.);+#5454 = EDGE_CURVE('',#5427,#5455,#5457,.T.);+#5455 = VERTEX_POINT('',#5456);+#5456 = CARTESIAN_POINT('',(1.217632698071,-0.775,5.551115123126E-17));+#5457 = SURFACE_CURVE('',#5458,(#5463,#5470),.PCURVE_S1.);+#5458 = CIRCLE('',#5459,0.25);+#5459 = AXIS2_PLACEMENT_3D('',#5460,#5461,#5462);+#5460 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.25));+#5461 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5462 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#5485 = PCURVE('',#2042,#5486);-#5486 = DEFINITIONAL_REPRESENTATION('',(#5487),#5491);-#5487 = CIRCLE('',#5488,0.25);-#5488 = AXIS2_PLACEMENT_2D('',#5489,#5490);-#5489 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#5490 = DIRECTION('',(-0.173648177667,0.984807753012));-#5491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5492 = PCURVE('',#5493,#5498);-#5493 = CYLINDRICAL_SURFACE('',#5494,0.25);-#5494 = AXIS2_PLACEMENT_3D('',#5495,#5496,#5497);-#5495 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));-#5496 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5497 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#5463 = PCURVE('',#2020,#5464);+#5464 = DEFINITIONAL_REPRESENTATION('',(#5465),#5469);+#5465 = CIRCLE('',#5466,0.25);+#5466 = AXIS2_PLACEMENT_2D('',#5467,#5468);+#5467 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#5468 = DIRECTION('',(-0.173648177667,0.984807753012));+#5469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5470 = PCURVE('',#5471,#5476);+#5471 = CYLINDRICAL_SURFACE('',#5472,0.25);+#5472 = AXIS2_PLACEMENT_3D('',#5473,#5474,#5475);+#5473 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.25));+#5474 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5475 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#5498 = DEFINITIONAL_REPRESENTATION('',(#5499),#5503);-#5499 = LINE('',#5500,#5501);-#5500 = CARTESIAN_POINT('',(6.28318530718,0.));-#5501 = VECTOR('',#5502,1.);-#5502 = DIRECTION('',(-1.,0.));-#5503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5504 = ORIENTED_EDGE('',*,*,#5505,.T.);-#5505 = EDGE_CURVE('',#5477,#5506,#5508,.T.);-#5506 = VERTEX_POINT('',#5507);-#5507 = CARTESIAN_POINT('',(1.4,-0.7,0.));-#5508 = SURFACE_CURVE('',#5509,(#5513,#5520),.PCURVE_S1.);-#5509 = LINE('',#5510,#5511);-#5510 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));-#5511 = VECTOR('',#5512,1.);-#5512 = DIRECTION('',(1.,1.110223024625E-16,0.));-#5513 = PCURVE('',#2042,#5514);-#5514 = DEFINITIONAL_REPRESENTATION('',(#5515),#5519);+#5476 = DEFINITIONAL_REPRESENTATION('',(#5477),#5481);+#5477 = LINE('',#5478,#5479);+#5478 = CARTESIAN_POINT('',(6.28318530718,0.));+#5479 = VECTOR('',#5480,1.);+#5480 = DIRECTION('',(-1.,0.));+#5481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5482 = ORIENTED_EDGE('',*,*,#5483,.T.);+#5483 = EDGE_CURVE('',#5455,#5484,#5486,.T.);+#5484 = VERTEX_POINT('',#5485);+#5485 = CARTESIAN_POINT('',(1.4,-0.775,5.551115123126E-17));+#5486 = SURFACE_CURVE('',#5487,(#5491,#5498),.PCURVE_S1.);+#5487 = LINE('',#5488,#5489);+#5488 = CARTESIAN_POINT('',(1.217632698071,-0.775,5.551115123126E-17));+#5489 = VECTOR('',#5490,1.);+#5490 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5491 = PCURVE('',#2020,#5492);+#5492 = DEFINITIONAL_REPRESENTATION('',(#5493),#5497);+#5493 = LINE('',#5494,#5495);+#5494 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#5495 = VECTOR('',#5496,1.);+#5496 = DIRECTION('',(0.,-1.));+#5497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5498 = PCURVE('',#5499,#5504);+#5499 = PLANE('',#5500);+#5500 = AXIS2_PLACEMENT_3D('',#5501,#5502,#5503);+#5501 = CARTESIAN_POINT('',(1.217632698071,-0.775,5.551115123126E-17));+#5502 = DIRECTION('',(0.,0.,1.));+#5503 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5504 = DEFINITIONAL_REPRESENTATION('',(#5505),#5509);+#5505 = LINE('',#5506,#5507);+#5506 = CARTESIAN_POINT('',(0.,0.));+#5507 = VECTOR('',#5508,1.);+#5508 = DIRECTION('',(1.,0.));+#5509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5510 = ORIENTED_EDGE('',*,*,#5511,.T.);+#5511 = EDGE_CURVE('',#5484,#5512,#5514,.T.);+#5512 = VERTEX_POINT('',#5513);+#5513 = CARTESIAN_POINT('',(1.4,-0.775,0.15));+#5514 = SURFACE_CURVE('',#5515,(#5519,#5526),.PCURVE_S1.); #5515 = LINE('',#5516,#5517);-#5516 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));+#5516 = CARTESIAN_POINT('',(1.4,-0.775,5.551115123126E-17)); #5517 = VECTOR('',#5518,1.);-#5518 = DIRECTION('',(0.,-1.));-#5519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5520 = PCURVE('',#5521,#5526);-#5521 = PLANE('',#5522);-#5522 = AXIS2_PLACEMENT_3D('',#5523,#5524,#5525);-#5523 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));-#5524 = DIRECTION('',(0.,0.,1.));-#5525 = DIRECTION('',(1.,1.110223024625E-16,-0.));-#5526 = DEFINITIONAL_REPRESENTATION('',(#5527),#5531);-#5527 = LINE('',#5528,#5529);-#5528 = CARTESIAN_POINT('',(0.,0.));-#5529 = VECTOR('',#5530,1.);-#5530 = DIRECTION('',(1.,0.));-#5531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5532 = ORIENTED_EDGE('',*,*,#5533,.T.);-#5533 = EDGE_CURVE('',#5506,#5534,#5536,.T.);-#5534 = VERTEX_POINT('',#5535);-#5535 = CARTESIAN_POINT('',(1.4,-0.7,0.15));-#5536 = SURFACE_CURVE('',#5537,(#5541,#5548),.PCURVE_S1.);-#5537 = LINE('',#5538,#5539);-#5538 = CARTESIAN_POINT('',(1.4,-0.7,0.));-#5539 = VECTOR('',#5540,1.);-#5540 = DIRECTION('',(0.,0.,1.));-#5541 = PCURVE('',#2042,#5542);-#5542 = DEFINITIONAL_REPRESENTATION('',(#5543),#5547);+#5518 = DIRECTION('',(0.,0.,1.));+#5519 = PCURVE('',#2020,#5520);+#5520 = DEFINITIONAL_REPRESENTATION('',(#5521),#5525);+#5521 = LINE('',#5522,#5523);+#5522 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#5523 = VECTOR('',#5524,1.);+#5524 = DIRECTION('',(1.,0.));+#5525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5526 = PCURVE('',#5527,#5532);+#5527 = PLANE('',#5528);+#5528 = AXIS2_PLACEMENT_3D('',#5529,#5530,#5531);+#5529 = CARTESIAN_POINT('',(1.4,-0.775,5.551115123126E-17));+#5530 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5531 = DIRECTION('',(0.,0.,1.));+#5532 = DEFINITIONAL_REPRESENTATION('',(#5533),#5537);+#5533 = LINE('',#5534,#5535);+#5534 = CARTESIAN_POINT('',(0.,0.));+#5535 = VECTOR('',#5536,1.);+#5536 = DIRECTION('',(1.,0.));+#5537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5538 = ORIENTED_EDGE('',*,*,#5539,.T.);+#5539 = EDGE_CURVE('',#5512,#5540,#5542,.T.);+#5540 = VERTEX_POINT('',#5541);+#5541 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.15));+#5542 = SURFACE_CURVE('',#5543,(#5547,#5554),.PCURVE_S1.); #5543 = LINE('',#5544,#5545);-#5544 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));+#5544 = CARTESIAN_POINT('',(1.4,-0.775,0.15)); #5545 = VECTOR('',#5546,1.);-#5546 = DIRECTION('',(1.,0.));-#5547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5548 = PCURVE('',#5549,#5554);-#5549 = PLANE('',#5550);-#5550 = AXIS2_PLACEMENT_3D('',#5551,#5552,#5553);-#5551 = CARTESIAN_POINT('',(1.4,-0.7,0.));-#5552 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5553 = DIRECTION('',(0.,0.,1.));-#5554 = DEFINITIONAL_REPRESENTATION('',(#5555),#5559);-#5555 = LINE('',#5556,#5557);-#5556 = CARTESIAN_POINT('',(0.,0.));-#5557 = VECTOR('',#5558,1.);-#5558 = DIRECTION('',(1.,0.));-#5559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5560 = ORIENTED_EDGE('',*,*,#5561,.T.);-#5561 = EDGE_CURVE('',#5534,#5562,#5564,.T.);-#5562 = VERTEX_POINT('',#5563);-#5563 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15));-#5564 = SURFACE_CURVE('',#5565,(#5569,#5576),.PCURVE_S1.);-#5565 = LINE('',#5566,#5567);-#5566 = CARTESIAN_POINT('',(1.4,-0.7,0.15));-#5567 = VECTOR('',#5568,1.);-#5568 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5569 = PCURVE('',#2042,#5570);-#5570 = DEFINITIONAL_REPRESENTATION('',(#5571),#5575);-#5571 = LINE('',#5572,#5573);-#5572 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#5573 = VECTOR('',#5574,1.);-#5574 = DIRECTION('',(0.,1.));-#5575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5576 = PCURVE('',#5577,#5582);-#5577 = PLANE('',#5578);-#5578 = AXIS2_PLACEMENT_3D('',#5579,#5580,#5581);-#5579 = CARTESIAN_POINT('',(1.4,-0.7,0.15));-#5580 = DIRECTION('',(0.,0.,-1.));-#5581 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));-#5582 = DEFINITIONAL_REPRESENTATION('',(#5583),#5587);-#5583 = LINE('',#5584,#5585);-#5584 = CARTESIAN_POINT('',(-0.,0.));-#5585 = VECTOR('',#5586,1.);-#5586 = DIRECTION('',(1.,0.));-#5587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5588 = ORIENTED_EDGE('',*,*,#5589,.T.);-#5589 = EDGE_CURVE('',#5562,#5590,#5592,.T.);-#5590 = VERTEX_POINT('',#5591);-#5591 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));-#5592 = SURFACE_CURVE('',#5593,(#5598,#5609),.PCURVE_S1.);-#5593 = CIRCLE('',#5594,0.1);-#5594 = AXIS2_PLACEMENT_3D('',#5595,#5596,#5597);-#5595 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));-#5596 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5597 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5598 = PCURVE('',#2042,#5599);-#5599 = DEFINITIONAL_REPRESENTATION('',(#5600),#5608);-#5600 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5601,#5602,#5603,#5604,-#5605,#5606,#5607),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5546 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5547 = PCURVE('',#2020,#5548);+#5548 = DEFINITIONAL_REPRESENTATION('',(#5549),#5553);+#5549 = LINE('',#5550,#5551);+#5550 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#5551 = VECTOR('',#5552,1.);+#5552 = DIRECTION('',(0.,1.));+#5553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5554 = PCURVE('',#5555,#5560);+#5555 = PLANE('',#5556);+#5556 = AXIS2_PLACEMENT_3D('',#5557,#5558,#5559);+#5557 = CARTESIAN_POINT('',(1.4,-0.775,0.15));+#5558 = DIRECTION('',(0.,0.,-1.));+#5559 = DIRECTION('',(-1.,-1.110223024625E-16,-0.));+#5560 = DEFINITIONAL_REPRESENTATION('',(#5561),#5565);+#5561 = LINE('',#5562,#5563);+#5562 = CARTESIAN_POINT('',(-0.,0.));+#5563 = VECTOR('',#5564,1.);+#5564 = DIRECTION('',(1.,0.));+#5565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5566 = ORIENTED_EDGE('',*,*,#5567,.T.);+#5567 = EDGE_CURVE('',#5540,#5568,#5570,.T.);+#5568 = VERTEX_POINT('',#5569);+#5569 = CARTESIAN_POINT('',(1.11915192277,-0.775,0.232635182233));+#5570 = SURFACE_CURVE('',#5571,(#5576,#5587),.PCURVE_S1.);+#5571 = CIRCLE('',#5572,0.1);+#5572 = AXIS2_PLACEMENT_3D('',#5573,#5574,#5575);+#5573 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.25));+#5574 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5575 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5576 = PCURVE('',#2020,#5577);+#5577 = DEFINITIONAL_REPRESENTATION('',(#5578),#5586);+#5578 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5579,#5580,#5581,#5582,+#5583,#5584,#5585),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5601 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5602 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#5603 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#5604 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#5605 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#5606 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#5607 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5609 = PCURVE('',#5610,#5615);-#5610 = CYLINDRICAL_SURFACE('',#5611,0.1);-#5611 = AXIS2_PLACEMENT_3D('',#5612,#5613,#5614);-#5612 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25));-#5613 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5614 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5615 = DEFINITIONAL_REPRESENTATION('',(#5616),#5620);-#5616 = LINE('',#5617,#5618);-#5617 = CARTESIAN_POINT('',(0.,0.));-#5618 = VECTOR('',#5619,1.);-#5619 = DIRECTION('',(1.,0.));-#5620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5621 = ORIENTED_EDGE('',*,*,#5622,.T.);-#5622 = EDGE_CURVE('',#5590,#5623,#5625,.T.);-#5623 = VERTEX_POINT('',#5624);-#5624 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417));-#5625 = SURFACE_CURVE('',#5626,(#5630,#5637),.PCURVE_S1.);-#5626 = LINE('',#5627,#5628);-#5627 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));-#5628 = VECTOR('',#5629,1.);-#5629 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));-#5630 = PCURVE('',#2042,#5631);-#5631 = DEFINITIONAL_REPRESENTATION('',(#5632),#5636);-#5632 = LINE('',#5633,#5634);-#5633 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#5634 = VECTOR('',#5635,1.);-#5635 = DIRECTION('',(0.986721169868,0.162423314012));-#5636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5637 = PCURVE('',#5638,#5643);-#5638 = PLANE('',#5639);-#5639 = AXIS2_PLACEMENT_3D('',#5640,#5641,#5642);-#5640 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));-#5641 = DIRECTION('',(-0.986721169868,-1.095480561672E-16,- -0.162423314012));-#5642 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));-#5643 = DEFINITIONAL_REPRESENTATION('',(#5644),#5648);-#5644 = LINE('',#5645,#5646);-#5645 = CARTESIAN_POINT('',(0.,0.));-#5646 = VECTOR('',#5647,1.);-#5647 = DIRECTION('',(1.,-1.051442023083E-33));-#5648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5649 = ORIENTED_EDGE('',*,*,#5650,.T.);-#5650 = EDGE_CURVE('',#5623,#5651,#5653,.T.);-#5651 = VERTEX_POINT('',#5652);-#5652 = CARTESIAN_POINT('',(0.85,-0.7,0.9));-#5653 = SURFACE_CURVE('',#5654,(#5659,#5666),.PCURVE_S1.);-#5654 = CIRCLE('',#5655,0.25);-#5655 = AXIS2_PLACEMENT_3D('',#5656,#5657,#5658);-#5656 = CARTESIAN_POINT('',(0.85,-0.7,0.65));-#5657 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5658 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#5659 = PCURVE('',#2042,#5660);-#5660 = DEFINITIONAL_REPRESENTATION('',(#5661),#5665);-#5661 = CIRCLE('',#5662,0.25);-#5662 = AXIS2_PLACEMENT_2D('',#5663,#5664);-#5663 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#5664 = DIRECTION('',(0.173648177667,-0.984807753012));-#5665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5666 = PCURVE('',#5667,#5672);-#5667 = CYLINDRICAL_SURFACE('',#5668,0.25);-#5668 = AXIS2_PLACEMENT_3D('',#5669,#5670,#5671);-#5669 = CARTESIAN_POINT('',(0.85,-0.7,0.65));-#5670 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5671 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#5672 = DEFINITIONAL_REPRESENTATION('',(#5673),#5677);-#5673 = LINE('',#5674,#5675);-#5674 = CARTESIAN_POINT('',(6.28318530718,0.));-#5675 = VECTOR('',#5676,1.);-#5676 = DIRECTION('',(-1.,0.));-#5677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5678 = ORIENTED_EDGE('',*,*,#5679,.T.);-#5679 = EDGE_CURVE('',#5651,#2027,#5680,.T.);-#5680 = SURFACE_CURVE('',#5681,(#5685,#5692),.PCURVE_S1.);-#5681 = LINE('',#5682,#5683);-#5682 = CARTESIAN_POINT('',(0.85,-0.7,0.9));-#5683 = VECTOR('',#5684,1.);-#5684 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5685 = PCURVE('',#2042,#5686);-#5686 = DEFINITIONAL_REPRESENTATION('',(#5687),#5691);-#5687 = LINE('',#5688,#5689);-#5688 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#5689 = VECTOR('',#5690,1.);-#5690 = DIRECTION('',(0.,1.));-#5691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5692 = PCURVE('',#2879,#5693);-#5693 = DEFINITIONAL_REPRESENTATION('',(#5694),#5698);-#5694 = LINE('',#5695,#5696);-#5695 = CARTESIAN_POINT('',(-0.,0.));-#5696 = VECTOR('',#5697,1.);-#5697 = DIRECTION('',(1.,0.));-#5698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5699 = ADVANCED_FACE('',(#5700),#2149,.F.);-#5700 = FACE_BOUND('',#5701,.F.);-#5701 = EDGE_LOOP('',(#5702,#5703,#5731,#5752));-#5702 = ORIENTED_EDGE('',*,*,#2135,.T.);-#5703 = ORIENTED_EDGE('',*,*,#5704,.T.);-#5704 = EDGE_CURVE('',#2108,#5705,#5707,.T.);-#5705 = VERTEX_POINT('',#5706);-#5706 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767));-#5707 = SURFACE_CURVE('',#5708,(#5713,#5720),.PCURVE_S1.);-#5708 = CIRCLE('',#5709,0.1);-#5709 = AXIS2_PLACEMENT_3D('',#5710,#5711,#5712);-#5710 = CARTESIAN_POINT('',(0.85,-1.2,0.65));-#5711 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5712 = DIRECTION('',(0.,0.,1.));-#5713 = PCURVE('',#2149,#5714);-#5714 = DEFINITIONAL_REPRESENTATION('',(#5715),#5719);-#5715 = LINE('',#5716,#5717);-#5716 = CARTESIAN_POINT('',(0.,-0.5));-#5717 = VECTOR('',#5718,1.);-#5718 = DIRECTION('',(1.,0.));-#5719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5720 = PCURVE('',#2123,#5721);-#5721 = DEFINITIONAL_REPRESENTATION('',(#5722),#5730);-#5722 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5723,#5724,#5725,#5726,-#5727,#5728,#5729),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5579 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5580 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#5581 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#5582 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#5583 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#5584 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#5585 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5587 = PCURVE('',#5588,#5593);+#5588 = CYLINDRICAL_SURFACE('',#5589,0.1);+#5589 = AXIS2_PLACEMENT_3D('',#5590,#5591,#5592);+#5590 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.25));+#5591 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5592 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5593 = DEFINITIONAL_REPRESENTATION('',(#5594),#5598);+#5594 = LINE('',#5595,#5596);+#5595 = CARTESIAN_POINT('',(0.,0.));+#5596 = VECTOR('',#5597,1.);+#5597 = DIRECTION('',(1.,0.));+#5598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5599 = ORIENTED_EDGE('',*,*,#5600,.T.);+#5600 = EDGE_CURVE('',#5568,#5601,#5603,.T.);+#5601 = VERTEX_POINT('',#5602);+#5602 = CARTESIAN_POINT('',(1.096201938253,-0.775,0.393412044417));+#5603 = SURFACE_CURVE('',#5604,(#5608,#5615),.PCURVE_S1.);+#5604 = LINE('',#5605,#5606);+#5605 = CARTESIAN_POINT('',(1.11915192277,-0.775,0.232635182233));+#5606 = VECTOR('',#5607,1.);+#5607 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5608 = PCURVE('',#2020,#5609);+#5609 = DEFINITIONAL_REPRESENTATION('',(#5610),#5614);+#5610 = LINE('',#5611,#5612);+#5611 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#5612 = VECTOR('',#5613,1.);+#5613 = DIRECTION('',(0.989965123745,0.14131190243));+#5614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5615 = PCURVE('',#5616,#5621);+#5616 = PLANE('',#5617);+#5617 = AXIS2_PLACEMENT_3D('',#5618,#5619,#5620);+#5618 = CARTESIAN_POINT('',(1.11915192277,-0.775,0.232635182233));+#5619 = DIRECTION('',(-0.989965123745,-1.099082073958E-16,-0.14131190243+ ));+#5620 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5621 = DEFINITIONAL_REPRESENTATION('',(#5622),#5626);+#5622 = LINE('',#5623,#5624);+#5623 = CARTESIAN_POINT('',(0.,0.));+#5624 = VECTOR('',#5625,1.);+#5625 = DIRECTION('',(1.,-1.42599261499E-33));+#5626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5627 = ORIENTED_EDGE('',*,*,#5628,.T.);+#5628 = EDGE_CURVE('',#5601,#5629,#5631,.T.);+#5629 = VERTEX_POINT('',#5630);+#5630 = CARTESIAN_POINT('',(0.85,-0.775,0.6));+#5631 = SURFACE_CURVE('',#5632,(#5637,#5644),.PCURVE_S1.);+#5632 = CIRCLE('',#5633,0.25);+#5633 = AXIS2_PLACEMENT_3D('',#5634,#5635,#5636);+#5634 = CARTESIAN_POINT('',(0.85,-0.775,0.35));+#5635 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5636 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#5637 = PCURVE('',#2020,#5638);+#5638 = DEFINITIONAL_REPRESENTATION('',(#5639),#5643);+#5639 = CIRCLE('',#5640,0.25);+#5640 = AXIS2_PLACEMENT_2D('',#5641,#5642);+#5641 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#5642 = DIRECTION('',(0.173648177667,-0.984807753012));+#5643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5644 = PCURVE('',#5645,#5650);+#5645 = CYLINDRICAL_SURFACE('',#5646,0.25);+#5646 = AXIS2_PLACEMENT_3D('',#5647,#5648,#5649);+#5647 = CARTESIAN_POINT('',(0.85,-0.775,0.35));+#5648 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5649 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#5650 = DEFINITIONAL_REPRESENTATION('',(#5651),#5655);+#5651 = LINE('',#5652,#5653);+#5652 = CARTESIAN_POINT('',(6.28318530718,0.));+#5653 = VECTOR('',#5654,1.);+#5654 = DIRECTION('',(-1.,0.));+#5655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5656 = ORIENTED_EDGE('',*,*,#5657,.T.);+#5657 = EDGE_CURVE('',#5629,#2005,#5658,.T.);+#5658 = SURFACE_CURVE('',#5659,(#5663,#5670),.PCURVE_S1.);+#5659 = LINE('',#5660,#5661);+#5660 = CARTESIAN_POINT('',(0.85,-0.775,0.6));+#5661 = VECTOR('',#5662,1.);+#5662 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5663 = PCURVE('',#2020,#5664);+#5664 = DEFINITIONAL_REPRESENTATION('',(#5665),#5669);+#5665 = LINE('',#5666,#5667);+#5666 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#5667 = VECTOR('',#5668,1.);+#5668 = DIRECTION('',(0.,1.));+#5669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5670 = PCURVE('',#2857,#5671);+#5671 = DEFINITIONAL_REPRESENTATION('',(#5672),#5676);+#5672 = LINE('',#5673,#5674);+#5673 = CARTESIAN_POINT('',(-0.,0.));+#5674 = VECTOR('',#5675,1.);+#5675 = DIRECTION('',(1.,0.));+#5676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5677 = ADVANCED_FACE('',(#5678),#2127,.F.);+#5678 = FACE_BOUND('',#5679,.F.);+#5679 = EDGE_LOOP('',(#5680,#5681,#5709,#5730));+#5680 = ORIENTED_EDGE('',*,*,#2113,.T.);+#5681 = ORIENTED_EDGE('',*,*,#5682,.T.);+#5682 = EDGE_CURVE('',#2086,#5683,#5685,.T.);+#5683 = VERTEX_POINT('',#5684);+#5684 = CARTESIAN_POINT('',(0.948480775301,-1.125,0.367364817767));+#5685 = SURFACE_CURVE('',#5686,(#5691,#5698),.PCURVE_S1.);+#5686 = CIRCLE('',#5687,0.1);+#5687 = AXIS2_PLACEMENT_3D('',#5688,#5689,#5690);+#5688 = CARTESIAN_POINT('',(0.85,-1.125,0.35));+#5689 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5690 = DIRECTION('',(0.,0.,1.));+#5691 = PCURVE('',#2127,#5692);+#5692 = DEFINITIONAL_REPRESENTATION('',(#5693),#5697);+#5693 = LINE('',#5694,#5695);+#5694 = CARTESIAN_POINT('',(0.,-0.35));+#5695 = VECTOR('',#5696,1.);+#5696 = DIRECTION('',(1.,0.));+#5697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5698 = PCURVE('',#2101,#5699);+#5699 = DEFINITIONAL_REPRESENTATION('',(#5700),#5708);+#5700 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5701,#5702,#5703,#5704,+#5705,#5706,#5707),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5723 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5724 = CARTESIAN_POINT('',(0.308304364685,4.591830438211E-02));-#5725 = CARTESIAN_POINT('',(0.158304364685,0.132520844761));-#5726 = CARTESIAN_POINT('',(8.304364685E-03,0.219123385139));-#5727 = CARTESIAN_POINT('',(0.158304364685,0.305725925517));-#5728 = CARTESIAN_POINT('',(0.308304364685,0.392328465896));-#5729 = CARTESIAN_POINT('',(0.308304364685,0.219123385139));-#5730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5731 = ORIENTED_EDGE('',*,*,#5732,.F.);-#5732 = EDGE_CURVE('',#5421,#5705,#5733,.T.);-#5733 = SURFACE_CURVE('',#5734,(#5738,#5745),.PCURVE_S1.);-#5734 = LINE('',#5735,#5736);-#5735 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767));-#5736 = VECTOR('',#5737,1.);-#5737 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5738 = PCURVE('',#2149,#5739);-#5739 = DEFINITIONAL_REPRESENTATION('',(#5740),#5744);-#5740 = LINE('',#5741,#5742);-#5741 = CARTESIAN_POINT('',(1.396263401592,0.));-#5742 = VECTOR('',#5743,1.);-#5743 = DIRECTION('',(0.,-1.));-#5744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5745 = PCURVE('',#5464,#5746);-#5746 = DEFINITIONAL_REPRESENTATION('',(#5747),#5751);-#5747 = LINE('',#5748,#5749);-#5748 = CARTESIAN_POINT('',(0.,0.));-#5749 = VECTOR('',#5750,1.);-#5750 = DIRECTION('',(1.187800808667E-29,-1.));-#5751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5752 = ORIENTED_EDGE('',*,*,#5420,.F.);-#5753 = ADVANCED_FACE('',(#5754),#2123,.T.);-#5754 = FACE_BOUND('',#5755,.T.);-#5755 = EDGE_LOOP('',(#5756,#5757,#5758,#5759,#5782,#5806,#5829,#5852,- #5875,#5903,#5926,#5950));-#5756 = ORIENTED_EDGE('',*,*,#2164,.F.);-#5757 = ORIENTED_EDGE('',*,*,#2107,.T.);-#5758 = ORIENTED_EDGE('',*,*,#5704,.T.);-#5759 = ORIENTED_EDGE('',*,*,#5760,.T.);-#5760 = EDGE_CURVE('',#5705,#5761,#5763,.T.);-#5761 = VERTEX_POINT('',#5762);-#5762 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583));-#5763 = SURFACE_CURVE('',#5764,(#5768,#5775),.PCURVE_S1.);-#5764 = LINE('',#5765,#5766);-#5765 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767));-#5766 = VECTOR('',#5767,1.);-#5767 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868)- );-#5768 = PCURVE('',#2123,#5769);-#5769 = DEFINITIONAL_REPRESENTATION('',(#5770),#5774);-#5770 = LINE('',#5771,#5772);-#5771 = CARTESIAN_POINT('',(0.225669182452,0.120642609838));-#5772 = VECTOR('',#5773,1.);-#5773 = DIRECTION('',(-0.986721169868,-0.162423314012));-#5774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5775 = PCURVE('',#5464,#5776);-#5776 = DEFINITIONAL_REPRESENTATION('',(#5777),#5781);-#5777 = LINE('',#5778,#5779);-#5778 = CARTESIAN_POINT('',(-9.016305147594E-18,-0.5));-#5779 = VECTOR('',#5780,1.);-#5780 = DIRECTION('',(1.,1.051442023083E-33));-#5781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5782 = ORIENTED_EDGE('',*,*,#5783,.T.);-#5783 = EDGE_CURVE('',#5761,#5784,#5786,.T.);-#5784 = VERTEX_POINT('',#5785);-#5785 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.));-#5786 = SURFACE_CURVE('',#5787,(#5792,#5799),.PCURVE_S1.);-#5787 = CIRCLE('',#5788,0.25);-#5788 = AXIS2_PLACEMENT_3D('',#5789,#5790,#5791);-#5789 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25));-#5790 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5791 = DIRECTION('',(-0.984807753012,-1.093356242223E-16,+#5701 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5702 = CARTESIAN_POINT('',(0.167174688049,4.114404703211E-02));+#5703 = CARTESIAN_POINT('',(1.7174688049E-02,0.127746587411));+#5704 = CARTESIAN_POINT('',(-0.132825311951,0.214349127789));+#5705 = CARTESIAN_POINT('',(1.7174688049E-02,0.300951668167));+#5706 = CARTESIAN_POINT('',(0.167174688049,0.387554208546));+#5707 = CARTESIAN_POINT('',(0.167174688049,0.214349127789));+#5708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5709 = ORIENTED_EDGE('',*,*,#5710,.F.);+#5710 = EDGE_CURVE('',#5399,#5683,#5711,.T.);+#5711 = SURFACE_CURVE('',#5712,(#5716,#5723),.PCURVE_S1.);+#5712 = LINE('',#5713,#5714);+#5713 = CARTESIAN_POINT('',(0.948480775301,-0.775,0.367364817767));+#5714 = VECTOR('',#5715,1.);+#5715 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5716 = PCURVE('',#2127,#5717);+#5717 = DEFINITIONAL_REPRESENTATION('',(#5718),#5722);+#5718 = LINE('',#5719,#5720);+#5719 = CARTESIAN_POINT('',(1.396263401592,0.));+#5720 = VECTOR('',#5721,1.);+#5721 = DIRECTION('',(0.,-1.));+#5722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5723 = PCURVE('',#5442,#5724);+#5724 = DEFINITIONAL_REPRESENTATION('',(#5725),#5729);+#5725 = LINE('',#5726,#5727);+#5726 = CARTESIAN_POINT('',(0.,0.));+#5727 = VECTOR('',#5728,1.);+#5728 = DIRECTION('',(-2.52495221085E-29,-1.));+#5729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5730 = ORIENTED_EDGE('',*,*,#5398,.F.);+#5731 = ADVANCED_FACE('',(#5732),#2101,.T.);+#5732 = FACE_BOUND('',#5733,.T.);+#5733 = EDGE_LOOP('',(#5734,#5735,#5736,#5737,#5760,#5784,#5807,#5830,+ #5853,#5881,#5904,#5928));+#5734 = ORIENTED_EDGE('',*,*,#2142,.F.);+#5735 = ORIENTED_EDGE('',*,*,#2085,.T.);+#5736 = ORIENTED_EDGE('',*,*,#5682,.T.);+#5737 = ORIENTED_EDGE('',*,*,#5738,.T.);+#5738 = EDGE_CURVE('',#5683,#5739,#5741,.T.);+#5739 = VERTEX_POINT('',#5740);+#5740 = CARTESIAN_POINT('',(0.971430759818,-1.125,0.206587955583));+#5741 = SURFACE_CURVE('',#5742,(#5746,#5753),.PCURVE_S1.);+#5742 = LINE('',#5743,#5744);+#5743 = CARTESIAN_POINT('',(0.948480775301,-1.125,0.367364817767));+#5744 = VECTOR('',#5745,1.);+#5745 = DIRECTION('',(0.14131190243,1.568877277316E-17,-0.989965123745)+ );+#5746 = PCURVE('',#2101,#5747);+#5747 = DEFINITIONAL_REPRESENTATION('',(#5748),#5752);+#5748 = LINE('',#5749,#5750);+#5749 = CARTESIAN_POINT('',(8.4539505816E-02,0.115868352488));+#5750 = VECTOR('',#5751,1.);+#5751 = DIRECTION('',(-0.989965123745,-0.14131190243));+#5752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5753 = PCURVE('',#5442,#5754);+#5754 = DEFINITIONAL_REPRESENTATION('',(#5755),#5759);+#5755 = LINE('',#5756,#5757);+#5756 = CARTESIAN_POINT('',(-5.491070470606E-18,-0.35));+#5757 = VECTOR('',#5758,1.);+#5758 = DIRECTION('',(1.,1.42599261499E-33));+#5759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5760 = ORIENTED_EDGE('',*,*,#5761,.T.);+#5761 = EDGE_CURVE('',#5739,#5762,#5764,.T.);+#5762 = VERTEX_POINT('',#5763);+#5763 = CARTESIAN_POINT('',(1.217632698071,-1.125,5.551115123126E-17));+#5764 = SURFACE_CURVE('',#5765,(#5770,#5777),.PCURVE_S1.);+#5765 = CIRCLE('',#5766,0.25);+#5766 = AXIS2_PLACEMENT_3D('',#5767,#5768,#5769);+#5767 = CARTESIAN_POINT('',(1.217632698071,-1.125,0.25));+#5768 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5769 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, -0.173648177667));-#5792 = PCURVE('',#2123,#5793);-#5793 = DEFINITIONAL_REPRESENTATION('',(#5794),#5798);-#5794 = CIRCLE('',#5795,0.25);-#5795 = AXIS2_PLACEMENT_2D('',#5796,#5797);-#5796 = CARTESIAN_POINT('',(-0.191695635315,-0.201407407144));-#5797 = DIRECTION('',(-0.173648177667,0.984807753012));-#5798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5799 = PCURVE('',#5493,#5800);-#5800 = DEFINITIONAL_REPRESENTATION('',(#5801),#5805);-#5801 = LINE('',#5802,#5803);-#5802 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#5803 = VECTOR('',#5804,1.);-#5804 = DIRECTION('',(-1.,0.));-#5805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5806 = ORIENTED_EDGE('',*,*,#5807,.T.);-#5807 = EDGE_CURVE('',#5784,#5808,#5810,.T.);-#5808 = VERTEX_POINT('',#5809);-#5809 = CARTESIAN_POINT('',(1.4,-1.2,0.));-#5810 = SURFACE_CURVE('',#5811,(#5815,#5822),.PCURVE_S1.);-#5811 = LINE('',#5812,#5813);-#5812 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.));-#5813 = VECTOR('',#5814,1.);-#5814 = DIRECTION('',(1.,1.110223024625E-16,0.));-#5815 = PCURVE('',#2123,#5816);-#5816 = DEFINITIONAL_REPRESENTATION('',(#5817),#5821);-#5817 = LINE('',#5818,#5819);-#5818 = CARTESIAN_POINT('',(-0.441695635315,-0.201407407144));-#5819 = VECTOR('',#5820,1.);-#5820 = DIRECTION('',(0.,-1.));-#5821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5822 = PCURVE('',#5521,#5823);-#5823 = DEFINITIONAL_REPRESENTATION('',(#5824),#5828);-#5824 = LINE('',#5825,#5826);-#5825 = CARTESIAN_POINT('',(-5.551115123125E-17,-0.5));-#5826 = VECTOR('',#5827,1.);-#5827 = DIRECTION('',(1.,0.));-#5828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5829 = ORIENTED_EDGE('',*,*,#5830,.T.);-#5830 = EDGE_CURVE('',#5808,#5831,#5833,.T.);-#5831 = VERTEX_POINT('',#5832);-#5832 = CARTESIAN_POINT('',(1.4,-1.2,0.15));-#5833 = SURFACE_CURVE('',#5834,(#5838,#5845),.PCURVE_S1.);-#5834 = LINE('',#5835,#5836);-#5835 = CARTESIAN_POINT('',(1.4,-1.2,0.));-#5836 = VECTOR('',#5837,1.);-#5837 = DIRECTION('',(0.,0.,1.));-#5838 = PCURVE('',#2123,#5839);-#5839 = DEFINITIONAL_REPRESENTATION('',(#5840),#5844);-#5840 = LINE('',#5841,#5842);-#5841 = CARTESIAN_POINT('',(-0.441695635315,-0.330876614861));-#5842 = VECTOR('',#5843,1.);-#5843 = DIRECTION('',(1.,0.));-#5844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5845 = PCURVE('',#5549,#5846);-#5846 = DEFINITIONAL_REPRESENTATION('',(#5847),#5851);-#5847 = LINE('',#5848,#5849);-#5848 = CARTESIAN_POINT('',(0.,-0.5));-#5849 = VECTOR('',#5850,1.);-#5850 = DIRECTION('',(1.,0.));-#5851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5852 = ORIENTED_EDGE('',*,*,#5853,.T.);-#5853 = EDGE_CURVE('',#5831,#5854,#5856,.T.);-#5854 = VERTEX_POINT('',#5855);-#5855 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15));-#5856 = SURFACE_CURVE('',#5857,(#5861,#5868),.PCURVE_S1.);-#5857 = LINE('',#5858,#5859);-#5858 = CARTESIAN_POINT('',(1.4,-1.2,0.15));-#5859 = VECTOR('',#5860,1.);-#5860 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5861 = PCURVE('',#2123,#5862);-#5862 = DEFINITIONAL_REPRESENTATION('',(#5863),#5867);-#5863 = LINE('',#5864,#5865);-#5864 = CARTESIAN_POINT('',(-0.291695635315,-0.330876614861));-#5865 = VECTOR('',#5866,1.);-#5866 = DIRECTION('',(0.,1.));-#5867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5868 = PCURVE('',#5577,#5869);-#5869 = DEFINITIONAL_REPRESENTATION('',(#5870),#5874);-#5870 = LINE('',#5871,#5872);-#5871 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#5872 = VECTOR('',#5873,1.);-#5873 = DIRECTION('',(1.,0.));-#5874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5875 = ORIENTED_EDGE('',*,*,#5876,.T.);-#5876 = EDGE_CURVE('',#5854,#5877,#5879,.T.);-#5877 = VERTEX_POINT('',#5878);-#5878 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233));-#5879 = SURFACE_CURVE('',#5880,(#5885,#5896),.PCURVE_S1.);-#5880 = CIRCLE('',#5881,0.1);-#5881 = AXIS2_PLACEMENT_3D('',#5882,#5883,#5884);-#5882 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25));-#5883 = DIRECTION('',(-1.110223024625E-16,1.,0.));-#5884 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));-#5885 = PCURVE('',#2123,#5886);-#5886 = DEFINITIONAL_REPRESENTATION('',(#5887),#5895);-#5887 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5888,#5889,#5890,#5891,-#5892,#5893,#5894),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#5770 = PCURVE('',#2101,#5771);+#5771 = DEFINITIONAL_REPRESENTATION('',(#5772),#5776);+#5772 = CIRCLE('',#5773,0.25);+#5773 = AXIS2_PLACEMENT_2D('',#5774,#5775);+#5774 = CARTESIAN_POINT('',(-3.2825311951E-02,-0.153283570282));+#5775 = DIRECTION('',(-0.173648177667,0.984807753012));+#5776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5777 = PCURVE('',#5471,#5778);+#5778 = DEFINITIONAL_REPRESENTATION('',(#5779),#5783);+#5779 = LINE('',#5780,#5781);+#5780 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#5781 = VECTOR('',#5782,1.);+#5782 = DIRECTION('',(-1.,-1.590277340732E-16));+#5783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5784 = ORIENTED_EDGE('',*,*,#5785,.T.);+#5785 = EDGE_CURVE('',#5762,#5786,#5788,.T.);+#5786 = VERTEX_POINT('',#5787);+#5787 = CARTESIAN_POINT('',(1.4,-1.125,5.551115123126E-17));+#5788 = SURFACE_CURVE('',#5789,(#5793,#5800),.PCURVE_S1.);+#5789 = LINE('',#5790,#5791);+#5790 = CARTESIAN_POINT('',(1.217632698071,-1.125,5.551115123126E-17));+#5791 = VECTOR('',#5792,1.);+#5792 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5793 = PCURVE('',#2101,#5794);+#5794 = DEFINITIONAL_REPRESENTATION('',(#5795),#5799);+#5795 = LINE('',#5796,#5797);+#5796 = CARTESIAN_POINT('',(-0.282825311951,-0.153283570282));+#5797 = VECTOR('',#5798,1.);+#5798 = DIRECTION('',(0.,-1.));+#5799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5800 = PCURVE('',#5499,#5801);+#5801 = DEFINITIONAL_REPRESENTATION('',(#5802),#5806);+#5802 = LINE('',#5803,#5804);+#5803 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35));+#5804 = VECTOR('',#5805,1.);+#5805 = DIRECTION('',(1.,0.));+#5806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5807 = ORIENTED_EDGE('',*,*,#5808,.T.);+#5808 = EDGE_CURVE('',#5786,#5809,#5811,.T.);+#5809 = VERTEX_POINT('',#5810);+#5810 = CARTESIAN_POINT('',(1.4,-1.125,0.15));+#5811 = SURFACE_CURVE('',#5812,(#5816,#5823),.PCURVE_S1.);+#5812 = LINE('',#5813,#5814);+#5813 = CARTESIAN_POINT('',(1.4,-1.125,5.551115123126E-17));+#5814 = VECTOR('',#5815,1.);+#5815 = DIRECTION('',(0.,0.,1.));+#5816 = PCURVE('',#2101,#5817);+#5817 = DEFINITIONAL_REPRESENTATION('',(#5818),#5822);+#5818 = LINE('',#5819,#5820);+#5819 = CARTESIAN_POINT('',(-0.282825311951,-0.335650872211));+#5820 = VECTOR('',#5821,1.);+#5821 = DIRECTION('',(1.,0.));+#5822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5823 = PCURVE('',#5527,#5824);+#5824 = DEFINITIONAL_REPRESENTATION('',(#5825),#5829);+#5825 = LINE('',#5826,#5827);+#5826 = CARTESIAN_POINT('',(0.,-0.35));+#5827 = VECTOR('',#5828,1.);+#5828 = DIRECTION('',(1.,0.));+#5829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5830 = ORIENTED_EDGE('',*,*,#5831,.T.);+#5831 = EDGE_CURVE('',#5809,#5832,#5834,.T.);+#5832 = VERTEX_POINT('',#5833);+#5833 = CARTESIAN_POINT('',(1.217632698071,-1.125,0.15));+#5834 = SURFACE_CURVE('',#5835,(#5839,#5846),.PCURVE_S1.);+#5835 = LINE('',#5836,#5837);+#5836 = CARTESIAN_POINT('',(1.4,-1.125,0.15));+#5837 = VECTOR('',#5838,1.);+#5838 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5839 = PCURVE('',#2101,#5840);+#5840 = DEFINITIONAL_REPRESENTATION('',(#5841),#5845);+#5841 = LINE('',#5842,#5843);+#5842 = CARTESIAN_POINT('',(-0.132825311951,-0.335650872211));+#5843 = VECTOR('',#5844,1.);+#5844 = DIRECTION('',(0.,1.));+#5845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5846 = PCURVE('',#5555,#5847);+#5847 = DEFINITIONAL_REPRESENTATION('',(#5848),#5852);+#5848 = LINE('',#5849,#5850);+#5849 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#5850 = VECTOR('',#5851,1.);+#5851 = DIRECTION('',(1.,0.));+#5852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5853 = ORIENTED_EDGE('',*,*,#5854,.T.);+#5854 = EDGE_CURVE('',#5832,#5855,#5857,.T.);+#5855 = VERTEX_POINT('',#5856);+#5856 = CARTESIAN_POINT('',(1.11915192277,-1.125,0.232635182233));+#5857 = SURFACE_CURVE('',#5858,(#5863,#5874),.PCURVE_S1.);+#5858 = CIRCLE('',#5859,0.1);+#5859 = AXIS2_PLACEMENT_3D('',#5860,#5861,#5862);+#5860 = CARTESIAN_POINT('',(1.217632698071,-1.125,0.25));+#5861 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#5862 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.));+#5863 = PCURVE('',#2101,#5864);+#5864 = DEFINITIONAL_REPRESENTATION('',(#5865),#5873);+#5865 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5866,#5867,#5868,#5869,+#5870,#5871,#5872),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#5888 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5889 = CARTESIAN_POINT('',(-0.291695635315,-2.820232638711E-02));-#5890 = CARTESIAN_POINT('',(-0.141695635315,-0.114804866766));-#5891 = CARTESIAN_POINT('',(8.304364685E-03,-0.201407407144));-#5892 = CARTESIAN_POINT('',(-0.141695635315,-0.288009947522));-#5893 = CARTESIAN_POINT('',(-0.291695635315,-0.374612487901));-#5894 = CARTESIAN_POINT('',(-0.291695635315,-0.201407407144));-#5895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5896 = PCURVE('',#5610,#5897);-#5897 = DEFINITIONAL_REPRESENTATION('',(#5898),#5902);-#5898 = LINE('',#5899,#5900);-#5899 = CARTESIAN_POINT('',(0.,-0.5));-#5900 = VECTOR('',#5901,1.);-#5901 = DIRECTION('',(1.,0.));-#5902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5903 = ORIENTED_EDGE('',*,*,#5904,.T.);-#5904 = EDGE_CURVE('',#5877,#5905,#5907,.T.);-#5905 = VERTEX_POINT('',#5906);-#5906 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417));-#5907 = SURFACE_CURVE('',#5908,(#5912,#5919),.PCURVE_S1.);-#5908 = LINE('',#5909,#5910);-#5909 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233));-#5910 = VECTOR('',#5911,1.);-#5911 = DIRECTION('',(-0.162423314012,-1.803261029519E-17,0.986721169868- ));-#5912 = PCURVE('',#2123,#5913);-#5913 = DEFINITIONAL_REPRESENTATION('',(#5914),#5918);-#5914 = LINE('',#5915,#5916);-#5915 = CARTESIAN_POINT('',(-0.209060453082,-0.102926631843));-#5916 = VECTOR('',#5917,1.);-#5917 = DIRECTION('',(0.986721169868,0.162423314012));-#5918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5919 = PCURVE('',#5638,#5920);-#5920 = DEFINITIONAL_REPRESENTATION('',(#5921),#5925);-#5921 = LINE('',#5922,#5923);-#5922 = CARTESIAN_POINT('',(9.016305147594E-18,-0.5));-#5923 = VECTOR('',#5924,1.);-#5924 = DIRECTION('',(1.,-1.051442023083E-33));-#5925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5926 = ORIENTED_EDGE('',*,*,#5927,.T.);-#5927 = EDGE_CURVE('',#5905,#5928,#5930,.T.);-#5928 = VERTEX_POINT('',#5929);-#5929 = CARTESIAN_POINT('',(0.85,-1.2,0.9));-#5930 = SURFACE_CURVE('',#5931,(#5936,#5943),.PCURVE_S1.);-#5931 = CIRCLE('',#5932,0.25);-#5932 = AXIS2_PLACEMENT_3D('',#5933,#5934,#5935);-#5933 = CARTESIAN_POINT('',(0.85,-1.2,0.65));-#5934 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#5935 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)- );-#5936 = PCURVE('',#2123,#5937);-#5937 = DEFINITIONAL_REPRESENTATION('',(#5938),#5942);-#5938 = CIRCLE('',#5939,0.25);-#5939 = AXIS2_PLACEMENT_2D('',#5940,#5941);-#5940 = CARTESIAN_POINT('',(0.208304364685,0.219123385139));-#5941 = DIRECTION('',(0.173648177667,-0.984807753012));-#5942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5943 = PCURVE('',#5667,#5944);-#5944 = DEFINITIONAL_REPRESENTATION('',(#5945),#5949);-#5945 = LINE('',#5946,#5947);-#5946 = CARTESIAN_POINT('',(6.28318530718,-0.5));-#5947 = VECTOR('',#5948,1.);-#5948 = DIRECTION('',(-1.,1.590277340732E-16));-#5949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5950 = ORIENTED_EDGE('',*,*,#5951,.T.);-#5951 = EDGE_CURVE('',#5928,#2165,#5952,.T.);-#5952 = SURFACE_CURVE('',#5953,(#5957,#5964),.PCURVE_S1.);-#5953 = LINE('',#5954,#5955);-#5954 = CARTESIAN_POINT('',(0.85,-1.2,0.9));-#5955 = VECTOR('',#5956,1.);-#5956 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#5957 = PCURVE('',#2123,#5958);-#5958 = DEFINITIONAL_REPRESENTATION('',(#5959),#5963);-#5959 = LINE('',#5960,#5961);-#5960 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));-#5961 = VECTOR('',#5962,1.);-#5962 = DIRECTION('',(0.,1.));-#5963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5964 = PCURVE('',#2879,#5965);-#5965 = DEFINITIONAL_REPRESENTATION('',(#5966),#5970);-#5966 = LINE('',#5967,#5968);-#5967 = CARTESIAN_POINT('',(5.551115123125E-17,-0.5));-#5968 = VECTOR('',#5969,1.);-#5969 = DIRECTION('',(1.,0.));-#5970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5971 = ADVANCED_FACE('',(#5972),#2390,.T.);-#5972 = FACE_BOUND('',#5973,.T.);-#5973 = EDGE_LOOP('',(#5974,#5975,#5976,#5977));-#5974 = ORIENTED_EDGE('',*,*,#4607,.T.);-#5975 = ORIENTED_EDGE('',*,*,#2374,.T.);-#5976 = ORIENTED_EDGE('',*,*,#4857,.F.);-#5977 = ORIENTED_EDGE('',*,*,#5978,.F.);-#5978 = EDGE_CURVE('',#4580,#4835,#5979,.T.);-#5979 = SURFACE_CURVE('',#5980,(#5984,#5991),.PCURVE_S1.);-#5980 = LINE('',#5981,#5982);-#5981 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417));-#5982 = VECTOR('',#5983,1.);-#5983 = DIRECTION('',(1.144237745222E-17,1.,0.));-#5984 = PCURVE('',#2390,#5985);-#5985 = DEFINITIONAL_REPRESENTATION('',(#5986),#5990);-#5986 = LINE('',#5987,#5988);-#5987 = CARTESIAN_POINT('',(6.28318530718,0.));-#5988 = VECTOR('',#5989,1.);-#5989 = DIRECTION('',(0.,-1.));-#5990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5991 = PCURVE('',#4595,#5992);-#5992 = DEFINITIONAL_REPRESENTATION('',(#5993),#5997);-#5993 = LINE('',#5994,#5995);-#5994 = CARTESIAN_POINT('',(0.466977780811,-8.67882345845E-19));-#5995 = VECTOR('',#5996,1.);-#5996 = DIRECTION('',(1.7573160551E-30,-1.));-#5997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#5998 = ADVANCED_FACE('',(#5999),#2512,.F.);-#5999 = FACE_BOUND('',#6000,.F.);-#6000 = EDGE_LOOP('',(#6001,#6002,#6023,#6024,#6025,#6026));-#6001 = ORIENTED_EDGE('',*,*,#3448,.F.);-#6002 = ORIENTED_EDGE('',*,*,#6003,.T.);-#6003 = EDGE_CURVE('',#3420,#3697,#6004,.T.);-#6004 = SURFACE_CURVE('',#6005,(#6009,#6016),.PCURVE_S1.);-#6005 = LINE('',#6006,#6007);-#6006 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));-#6007 = VECTOR('',#6008,1.);-#6008 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6009 = PCURVE('',#2512,#6010);-#6010 = DEFINITIONAL_REPRESENTATION('',(#6011),#6015);-#6011 = LINE('',#6012,#6013);-#6012 = CARTESIAN_POINT('',(0.,-0.));-#6013 = VECTOR('',#6014,1.);-#6014 = DIRECTION('',(0.,-1.));-#6015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6016 = PCURVE('',#3436,#6017);+#5866 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5867 = CARTESIAN_POINT('',(-0.132825311951,1.992151047489E-02));+#5868 = CARTESIAN_POINT('',(1.7174688049E-02,-6.668102990356E-02));+#5869 = CARTESIAN_POINT('',(0.167174688049,-0.153283570282));+#5870 = CARTESIAN_POINT('',(1.7174688049E-02,-0.23988611066));+#5871 = CARTESIAN_POINT('',(-0.132825311951,-0.326488651039));+#5872 = CARTESIAN_POINT('',(-0.132825311951,-0.153283570282));+#5873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5874 = PCURVE('',#5588,#5875);+#5875 = DEFINITIONAL_REPRESENTATION('',(#5876),#5880);+#5876 = LINE('',#5877,#5878);+#5877 = CARTESIAN_POINT('',(0.,-0.35));+#5878 = VECTOR('',#5879,1.);+#5879 = DIRECTION('',(1.,0.));+#5880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5881 = ORIENTED_EDGE('',*,*,#5882,.T.);+#5882 = EDGE_CURVE('',#5855,#5883,#5885,.T.);+#5883 = VERTEX_POINT('',#5884);+#5884 = CARTESIAN_POINT('',(1.096201938253,-1.125,0.393412044417));+#5885 = SURFACE_CURVE('',#5886,(#5890,#5897),.PCURVE_S1.);+#5886 = LINE('',#5887,#5888);+#5887 = CARTESIAN_POINT('',(1.11915192277,-1.125,0.232635182233));+#5888 = VECTOR('',#5889,1.);+#5889 = DIRECTION('',(-0.14131190243,-1.568877277316E-17,0.989965123745)+ );+#5890 = PCURVE('',#2101,#5891);+#5891 = DEFINITIONAL_REPRESENTATION('',(#5892),#5896);+#5892 = LINE('',#5893,#5894);+#5893 = CARTESIAN_POINT('',(-5.0190129718E-02,-5.4802794981E-02));+#5894 = VECTOR('',#5895,1.);+#5895 = DIRECTION('',(0.989965123745,0.14131190243));+#5896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5897 = PCURVE('',#5616,#5898);+#5898 = DEFINITIONAL_REPRESENTATION('',(#5899),#5903);+#5899 = LINE('',#5900,#5901);+#5900 = CARTESIAN_POINT('',(5.491070470606E-18,-0.35));+#5901 = VECTOR('',#5902,1.);+#5902 = DIRECTION('',(1.,-1.42599261499E-33));+#5903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5904 = ORIENTED_EDGE('',*,*,#5905,.T.);+#5905 = EDGE_CURVE('',#5883,#5906,#5908,.T.);+#5906 = VERTEX_POINT('',#5907);+#5907 = CARTESIAN_POINT('',(0.85,-1.125,0.6));+#5908 = SURFACE_CURVE('',#5909,(#5914,#5921),.PCURVE_S1.);+#5909 = CIRCLE('',#5910,0.25);+#5910 = AXIS2_PLACEMENT_3D('',#5911,#5912,#5913);+#5911 = CARTESIAN_POINT('',(0.85,-1.125,0.35));+#5912 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5913 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#5914 = PCURVE('',#2101,#5915);+#5915 = DEFINITIONAL_REPRESENTATION('',(#5916),#5920);+#5916 = CIRCLE('',#5917,0.25);+#5917 = AXIS2_PLACEMENT_2D('',#5918,#5919);+#5918 = CARTESIAN_POINT('',(6.7174688049E-02,0.214349127789));+#5919 = DIRECTION('',(0.173648177667,-0.984807753012));+#5920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5921 = PCURVE('',#5645,#5922);+#5922 = DEFINITIONAL_REPRESENTATION('',(#5923),#5927);+#5923 = LINE('',#5924,#5925);+#5924 = CARTESIAN_POINT('',(6.28318530718,-0.35));+#5925 = VECTOR('',#5926,1.);+#5926 = DIRECTION('',(-1.,1.590277340732E-16));+#5927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5928 = ORIENTED_EDGE('',*,*,#5929,.T.);+#5929 = EDGE_CURVE('',#5906,#2143,#5930,.T.);+#5930 = SURFACE_CURVE('',#5931,(#5935,#5942),.PCURVE_S1.);+#5931 = LINE('',#5932,#5933);+#5932 = CARTESIAN_POINT('',(0.85,-1.125,0.6));+#5933 = VECTOR('',#5934,1.);+#5934 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5935 = PCURVE('',#2101,#5936);+#5936 = DEFINITIONAL_REPRESENTATION('',(#5937),#5941);+#5937 = LINE('',#5938,#5939);+#5938 = CARTESIAN_POINT('',(0.317174688049,0.214349127789));+#5939 = VECTOR('',#5940,1.);+#5940 = DIRECTION('',(0.,1.));+#5941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5942 = PCURVE('',#2857,#5943);+#5943 = DEFINITIONAL_REPRESENTATION('',(#5944),#5948);+#5944 = LINE('',#5945,#5946);+#5945 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35));+#5946 = VECTOR('',#5947,1.);+#5947 = DIRECTION('',(1.,0.));+#5948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5949 = ADVANCED_FACE('',(#5950),#2368,.T.);+#5950 = FACE_BOUND('',#5951,.T.);+#5951 = EDGE_LOOP('',(#5952,#5953,#5954,#5955));+#5952 = ORIENTED_EDGE('',*,*,#4585,.T.);+#5953 = ORIENTED_EDGE('',*,*,#2352,.T.);+#5954 = ORIENTED_EDGE('',*,*,#4835,.F.);+#5955 = ORIENTED_EDGE('',*,*,#5956,.F.);+#5956 = EDGE_CURVE('',#4558,#4813,#5957,.T.);+#5957 = SURFACE_CURVE('',#5958,(#5962,#5969),.PCURVE_S1.);+#5958 = LINE('',#5959,#5960);+#5959 = CARTESIAN_POINT('',(-1.096201938253,0.775,0.393412044417));+#5960 = VECTOR('',#5961,1.);+#5961 = DIRECTION('',(1.144237745222E-17,1.,0.));+#5962 = PCURVE('',#2368,#5963);+#5963 = DEFINITIONAL_REPRESENTATION('',(#5964),#5968);+#5964 = LINE('',#5965,#5966);+#5965 = CARTESIAN_POINT('',(6.28318530718,0.));+#5966 = VECTOR('',#5967,1.);+#5967 = DIRECTION('',(0.,-1.));+#5968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5969 = PCURVE('',#4573,#5970);+#5970 = DEFINITIONAL_REPRESENTATION('',(#5971),#5975);+#5971 = LINE('',#5972,#5973);+#5972 = CARTESIAN_POINT('',(0.16240659224,-2.626023853624E-19));+#5973 = VECTOR('',#5974,1.);+#5974 = DIRECTION('',(-2.656255567127E-30,-1.));+#5975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5976 = ADVANCED_FACE('',(#5977),#2490,.F.);+#5977 = FACE_BOUND('',#5978,.F.);+#5978 = EDGE_LOOP('',(#5979,#5980,#6001,#6002,#6003,#6004));+#5979 = ORIENTED_EDGE('',*,*,#3426,.F.);+#5980 = ORIENTED_EDGE('',*,*,#5981,.T.);+#5981 = EDGE_CURVE('',#3398,#3675,#5982,.T.);+#5982 = SURFACE_CURVE('',#5983,(#5987,#5994),.PCURVE_S1.);+#5983 = LINE('',#5984,#5985);+#5984 = CARTESIAN_POINT('',(-0.85,-1.125,0.6));+#5985 = VECTOR('',#5986,1.);+#5986 = DIRECTION('',(1.144237745222E-17,1.,0.));+#5987 = PCURVE('',#2490,#5988);+#5988 = DEFINITIONAL_REPRESENTATION('',(#5989),#5993);+#5989 = LINE('',#5990,#5991);+#5990 = CARTESIAN_POINT('',(0.,-0.));+#5991 = VECTOR('',#5992,1.);+#5992 = DIRECTION('',(0.,-1.));+#5993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5994 = PCURVE('',#3414,#5995);+#5995 = DEFINITIONAL_REPRESENTATION('',(#5996),#6000);+#5996 = LINE('',#5997,#5998);+#5997 = CARTESIAN_POINT('',(4.886921905584,0.));+#5998 = VECTOR('',#5999,1.);+#5999 = DIRECTION('',(0.,-1.));+#6000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6001 = ORIENTED_EDGE('',*,*,#3698,.T.);+#6002 = ORIENTED_EDGE('',*,*,#3745,.T.);+#6003 = ORIENTED_EDGE('',*,*,#2474,.F.);+#6004 = ORIENTED_EDGE('',*,*,#3067,.F.);+#6005 = ADVANCED_FACE('',(#6006),#2541,.F.);+#6006 = FACE_BOUND('',#6007,.F.);+#6007 = EDGE_LOOP('',(#6008,#6009,#6030,#6031,#6032,#6033));+#6008 = ORIENTED_EDGE('',*,*,#4030,.F.);+#6009 = ORIENTED_EDGE('',*,*,#6010,.T.);+#6010 = EDGE_CURVE('',#4002,#4279,#6011,.T.);+#6011 = SURFACE_CURVE('',#6012,(#6016,#6023),.PCURVE_S1.);+#6012 = LINE('',#6013,#6014);+#6013 = CARTESIAN_POINT('',(-0.85,-0.175,0.6));+#6014 = VECTOR('',#6015,1.);+#6015 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6016 = PCURVE('',#2541,#6017); #6017 = DEFINITIONAL_REPRESENTATION('',(#6018),#6022); #6018 = LINE('',#6019,#6020);-#6019 = CARTESIAN_POINT('',(4.886921905584,0.));+#6019 = CARTESIAN_POINT('',(0.,-0.)); #6020 = VECTOR('',#6021,1.); #6021 = DIRECTION('',(0.,-1.)); #6022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6023 = ORIENTED_EDGE('',*,*,#3720,.T.);-#6024 = ORIENTED_EDGE('',*,*,#3767,.T.);-#6025 = ORIENTED_EDGE('',*,*,#2496,.F.);-#6026 = ORIENTED_EDGE('',*,*,#3089,.F.);-#6027 = ADVANCED_FACE('',(#6028),#2563,.F.);-#6028 = FACE_BOUND('',#6029,.F.);-#6029 = EDGE_LOOP('',(#6030,#6031,#6052,#6053,#6054,#6055));-#6030 = ORIENTED_EDGE('',*,*,#4052,.F.);-#6031 = ORIENTED_EDGE('',*,*,#6032,.T.);-#6032 = EDGE_CURVE('',#4024,#4301,#6033,.T.);-#6033 = SURFACE_CURVE('',#6034,(#6038,#6045),.PCURVE_S1.);-#6034 = LINE('',#6035,#6036);-#6035 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));-#6036 = VECTOR('',#6037,1.);-#6037 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6038 = PCURVE('',#2563,#6039);-#6039 = DEFINITIONAL_REPRESENTATION('',(#6040),#6044);-#6040 = LINE('',#6041,#6042);-#6041 = CARTESIAN_POINT('',(0.,-0.));-#6042 = VECTOR('',#6043,1.);-#6043 = DIRECTION('',(0.,-1.));-#6044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6045 = PCURVE('',#4040,#6046);-#6046 = DEFINITIONAL_REPRESENTATION('',(#6047),#6051);-#6047 = LINE('',#6048,#6049);-#6048 = CARTESIAN_POINT('',(4.886921905584,0.));-#6049 = VECTOR('',#6050,1.);-#6050 = DIRECTION('',(0.,-1.));-#6051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6052 = ORIENTED_EDGE('',*,*,#4324,.T.);-#6053 = ORIENTED_EDGE('',*,*,#4351,.T.);-#6054 = ORIENTED_EDGE('',*,*,#2547,.F.);-#6055 = ORIENTED_EDGE('',*,*,#3745,.F.);-#6056 = ADVANCED_FACE('',(#6057,#6128),#2635,.T.);-#6057 = FACE_BOUND('',#6058,.T.);-#6058 = EDGE_LOOP('',(#6059,#6060,#6061,#6062,#6084,#6106,#6126,#6127));-#6059 = ORIENTED_EDGE('',*,*,#2745,.F.);-#6060 = ORIENTED_EDGE('',*,*,#2698,.F.);-#6061 = ORIENTED_EDGE('',*,*,#2620,.F.);+#6023 = PCURVE('',#4018,#6024);+#6024 = DEFINITIONAL_REPRESENTATION('',(#6025),#6029);+#6025 = LINE('',#6026,#6027);+#6026 = CARTESIAN_POINT('',(4.886921905584,0.));+#6027 = VECTOR('',#6028,1.);+#6028 = DIRECTION('',(0.,-1.));+#6029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6030 = ORIENTED_EDGE('',*,*,#4302,.T.);+#6031 = ORIENTED_EDGE('',*,*,#4329,.T.);+#6032 = ORIENTED_EDGE('',*,*,#2525,.F.);+#6033 = ORIENTED_EDGE('',*,*,#3723,.F.);+#6034 = ADVANCED_FACE('',(#6035,#6106),#2613,.T.);+#6035 = FACE_BOUND('',#6036,.T.);+#6036 = EDGE_LOOP('',(#6037,#6038,#6039,#6040,#6062,#6084,#6104,#6105));+#6037 = ORIENTED_EDGE('',*,*,#2723,.F.);+#6038 = ORIENTED_EDGE('',*,*,#2676,.F.);+#6039 = ORIENTED_EDGE('',*,*,#2598,.F.);+#6040 = ORIENTED_EDGE('',*,*,#6041,.F.);+#6041 = EDGE_CURVE('',#6042,#2599,#6044,.T.);+#6042 = VERTEX_POINT('',#6043);+#6043 = CARTESIAN_POINT('',(-0.667905353927,-1.375810707854,0.95));+#6044 = SURFACE_CURVE('',#6045,(#6049,#6056),.PCURVE_S1.);+#6045 = LINE('',#6046,#6047);+#6046 = CARTESIAN_POINT('',(-0.667905353927,-1.375810707854,0.95));+#6047 = VECTOR('',#6048,1.);+#6048 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#6049 = PCURVE('',#2613,#6050);+#6050 = DEFINITIONAL_REPRESENTATION('',(#6051),#6055);+#6051 = LINE('',#6052,#6053);+#6052 = CARTESIAN_POINT('',(2.475350201398,-1.20169122316));+#6053 = VECTOR('',#6054,1.);+#6054 = DIRECTION('',(-0.944919570391,-0.327302620662));+#6055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6056 = PCURVE('',#2638,#6057);+#6057 = DEFINITIONAL_REPRESENTATION('',(#6058),#6061);+#6058 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6059,#6060),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,8.189053685758E-02),.PIECEWISE_BEZIER_KNOTS.);+#6059 = CARTESIAN_POINT('',(-4.491614528285E-17,1.));+#6060 = CARTESIAN_POINT('',(0.116672618896,1.));+#6061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) ); #6062 = ORIENTED_EDGE('',*,*,#6063,.F.);-#6063 = EDGE_CURVE('',#6064,#2621,#6066,.T.);+#6063 = EDGE_CURVE('',#6064,#6042,#6066,.T.); #6064 = VERTEX_POINT('',#6065);-#6065 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#6065 = CARTESIAN_POINT('',(0.667905353927,-1.375810707854,0.95)); #6066 = SURFACE_CURVE('',#6067,(#6071,#6078),.PCURVE_S1.); #6067 = LINE('',#6068,#6069);-#6068 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#6068 = CARTESIAN_POINT('',(0.667905353927,-1.375810707854,0.95)); #6069 = VECTOR('',#6070,1.);-#6070 = DIRECTION('',(-0.707106781187,0.707106781187,0.));-#6071 = PCURVE('',#2635,#6072);+#6070 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6071 = PCURVE('',#2613,#6072); #6072 = DEFINITIONAL_REPRESENTATION('',(#6073),#6077); #6073 = LINE('',#6074,#6075);-#6074 = CARTESIAN_POINT('',(2.399925287509,-1.163972270518));+#6074 = CARTESIAN_POINT('',(3.058726967645,5.566658245471E-13)); #6075 = VECTOR('',#6076,1.);-#6076 = DIRECTION('',(-0.944797752613,-0.327654096049));+#6076 = DIRECTION('',(-0.436721133329,-0.89959693847)); #6077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6078 = PCURVE('',#2660,#6079);+#6078 = PCURVE('',#3128,#6079); #6079 = DEFINITIONAL_REPRESENTATION('',(#6080),#6083); #6080 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6081,#6082),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);-#6081 = CARTESIAN_POINT('',(-1.206891714386E-16,1.));-#6082 = CARTESIAN_POINT('',(0.116672618896,1.));+ .F.,(2,2),(0.,1.335810707854),.PIECEWISE_BEZIER_KNOTS.);+#6081 = CARTESIAN_POINT('',(1.437455577757E-16,1.));+#6082 = CARTESIAN_POINT('',(1.385,1.)); #6083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) ); #6084 = ORIENTED_EDGE('',*,*,#6085,.F.);-#6085 = EDGE_CURVE('',#6086,#6064,#6088,.T.);-#6086 = VERTEX_POINT('',#6087);-#6087 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));-#6088 = SURFACE_CURVE('',#6089,(#6093,#6100),.PCURVE_S1.);-#6089 = LINE('',#6090,#6091);-#6090 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));-#6091 = VECTOR('',#6092,1.);-#6092 = DIRECTION('',(-1.,-1.110223024625E-16,0.));-#6093 = PCURVE('',#2635,#6094);-#6094 = DEFINITIONAL_REPRESENTATION('',(#6095),#6099);-#6095 = LINE('',#6096,#6097);-#6096 = CARTESIAN_POINT('',(2.964455964188,5.511147094239E-13));-#6097 = VECTOR('',#6098,1.);-#6098 = DIRECTION('',(-0.436386464522,-0.899759330922));-#6099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6100 = PCURVE('',#3150,#6101);-#6101 = DEFINITIONAL_REPRESENTATION('',(#6102),#6105);-#6102 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6103,#6104),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,1.293648457444),.PIECEWISE_BEZIER_KNOTS.);-#6103 = CARTESIAN_POINT('',(-4.999922991079E-18,1.));-#6104 = CARTESIAN_POINT('',(1.385,1.));-#6105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6106 = ORIENTED_EDGE('',*,*,#6107,.F.);-#6107 = EDGE_CURVE('',#2915,#6086,#6108,.T.);-#6108 = SURFACE_CURVE('',#6109,(#6113,#6120),.PCURVE_S1.);-#6109 = LINE('',#6110,#6111);-#6110 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));-#6111 = VECTOR('',#6112,1.);-#6112 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));-#6113 = PCURVE('',#2635,#6114);-#6114 = DEFINITIONAL_REPRESENTATION('',(#6115),#6119);-#6115 = LINE('',#6116,#6117);-#6116 = CARTESIAN_POINT('',(2.947392615772,4.92025383766E-02));-#6117 = VECTOR('',#6118,1.);-#6118 = DIRECTION('',(0.327654096049,-0.944797752613));-#6119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6120 = PCURVE('',#2929,#6121);-#6121 = DEFINITIONAL_REPRESENTATION('',(#6122),#6125);-#6122 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6123,#6124),.UNSPECIFIED.,.F.,- .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);-#6123 = CARTESIAN_POINT('',(5.637459626905E-17,1.));-#6124 = CARTESIAN_POINT('',(0.116672618896,1.));-#6125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6126 = ORIENTED_EDGE('',*,*,#2941,.F.);-#6127 = ORIENTED_EDGE('',*,*,#2792,.F.);-#6128 = FACE_BOUND('',#6129,.T.);-#6129 = EDGE_LOOP('',(#6130));-#6130 = ORIENTED_EDGE('',*,*,#6131,.T.);-#6131 = EDGE_CURVE('',#6132,#6132,#6134,.T.);-#6132 = VERTEX_POINT('',#6133);-#6133 = CARTESIAN_POINT('',(-0.483648457443,1.083648457443,1.55));-#6134 = SURFACE_CURVE('',#6135,(#6140,#6151),.PCURVE_S1.);-#6135 = CIRCLE('',#6136,5.E-02);-#6136 = AXIS2_PLACEMENT_3D('',#6137,#6138,#6139);-#6137 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55));-#6138 = DIRECTION('',(0.,-0.,-1.));-#6139 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6140 = PCURVE('',#2635,#6141);-#6141 = DEFINITIONAL_REPRESENTATION('',(#6142),#6150);-#6142 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6143,#6144,#6145,#6146,-#6147,#6148,#6149),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+#6085 = EDGE_CURVE('',#2893,#6064,#6086,.T.);+#6086 = SURFACE_CURVE('',#6087,(#6091,#6098),.PCURVE_S1.);+#6087 = LINE('',#6088,#6089);+#6088 = CARTESIAN_POINT('',(0.725810707854,-1.317905353927,0.95));+#6089 = VECTOR('',#6090,1.);+#6090 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#6091 = PCURVE('',#2613,#6092);+#6092 = DEFINITIONAL_REPRESENTATION('',(#6093),#6097);+#6093 = LINE('',#6094,#6095);+#6094 = CARTESIAN_POINT('',(3.031923980324,7.737997090709E-02));+#6095 = VECTOR('',#6096,1.);+#6096 = DIRECTION('',(0.327302620662,-0.944919570391));+#6097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6098 = PCURVE('',#2907,#6099);+#6099 = DEFINITIONAL_REPRESENTATION('',(#6100),#6103);+#6100 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6101,#6102),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,8.189053685758E-02),.PIECEWISE_BEZIER_KNOTS.);+#6101 = CARTESIAN_POINT('',(6.610048995849E-17,1.));+#6102 = CARTESIAN_POINT('',(0.116672618896,1.));+#6103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6104 = ORIENTED_EDGE('',*,*,#2919,.F.);+#6105 = ORIENTED_EDGE('',*,*,#2770,.F.);+#6106 = FACE_BOUND('',#6107,.T.);+#6107 = EDGE_LOOP('',(#6108));+#6108 = ORIENTED_EDGE('',*,*,#6109,.T.);+#6109 = EDGE_CURVE('',#6110,#6110,#6112,.T.);+#6110 = VERTEX_POINT('',#6111);+#6111 = CARTESIAN_POINT('',(-0.525810707854,1.125810707854,0.95));+#6112 = SURFACE_CURVE('',#6113,(#6118,#6129),.PCURVE_S1.);+#6113 = CIRCLE('',#6114,5.E-02);+#6114 = AXIS2_PLACEMENT_3D('',#6115,#6116,#6117);+#6115 = CARTESIAN_POINT('',(-0.525810707854,1.175810707854,0.95));+#6116 = DIRECTION('',(0.,-0.,-1.));+#6117 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6118 = PCURVE('',#2613,#6119);+#6119 = DEFINITIONAL_REPRESENTATION('',(#6120),#6128);+#6120 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6121,#6122,#6123,#6124,+#6125,#6126,#6127),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, 6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, 1.,0.5,1.)) REPRESENTATION_ITEM('') );-#6143 = CARTESIAN_POINT('',(0.296147530655,3.772230665819E-02));-#6144 = CARTESIAN_POINT('',(0.25835535424,-4.01991371289E-02));-#6145 = CARTESIAN_POINT('',(0.209769492628,3.149056960381E-02));-#6146 = CARTESIAN_POINT('',(0.161183631016,0.103180276337));-#6147 = CARTESIAN_POINT('',(0.247561669043,0.109412013391));-#6148 = CARTESIAN_POINT('',(0.333939707069,0.115643750445));-#6149 = CARTESIAN_POINT('',(0.296147530655,3.772230665819E-02));-#6150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6151 = PCURVE('',#6152,#6157);-#6152 = PLANE('',#6153);-#6153 = AXIS2_PLACEMENT_3D('',#6154,#6155,#6156);-#6154 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55));-#6155 = DIRECTION('',(0.,0.,-1.));-#6156 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6157 = DEFINITIONAL_REPRESENTATION('',(#6158),#6162);-#6158 = CIRCLE('',#6159,5.E-02);-#6159 = AXIS2_PLACEMENT_2D('',#6160,#6161);-#6160 = CARTESIAN_POINT('',(0.,0.));-#6161 = DIRECTION('',(1.,0.));-#6162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6163 = ADVANCED_FACE('',(#6164),#2660,.F.);-#6164 = FACE_BOUND('',#6165,.F.);-#6165 = EDGE_LOOP('',(#6166,#6167,#6168,#6169));-#6166 = ORIENTED_EDGE('',*,*,#3111,.T.);-#6167 = ORIENTED_EDGE('',*,*,#2647,.T.);-#6168 = ORIENTED_EDGE('',*,*,#6063,.F.);-#6169 = ORIENTED_EDGE('',*,*,#6170,.F.);-#6170 = EDGE_CURVE('',#3112,#6064,#6171,.T.);-#6171 = SURFACE_CURVE('',#6172,(#6175,#6182),.PCURVE_S1.);-#6172 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6173,#6174),.UNSPECIFIED.,.F.,+#6121 = CARTESIAN_POINT('',(0.28695496949,1.864762524799E-02));+#6122 = CARTESIAN_POINT('',(0.249133809907,-5.925975494015E-02));+#6123 = CARTESIAN_POINT('',(0.200574619314,1.244802015358E-02));+#6124 = CARTESIAN_POINT('',(0.15201542872,8.415579524732E-02));+#6125 = CARTESIAN_POINT('',(0.238395778897,9.035540034173E-02));+#6126 = CARTESIAN_POINT('',(0.324776129074,9.655500543614E-02));+#6127 = CARTESIAN_POINT('',(0.28695496949,1.864762524799E-02));+#6128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6129 = PCURVE('',#6130,#6135);+#6130 = PLANE('',#6131);+#6131 = AXIS2_PLACEMENT_3D('',#6132,#6133,#6134);+#6132 = CARTESIAN_POINT('',(-0.525810707854,1.175810707854,0.95));+#6133 = DIRECTION('',(0.,0.,-1.));+#6134 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6135 = DEFINITIONAL_REPRESENTATION('',(#6136),#6140);+#6136 = CIRCLE('',#6137,5.E-02);+#6137 = AXIS2_PLACEMENT_2D('',#6138,#6139);+#6138 = CARTESIAN_POINT('',(0.,0.));+#6139 = DIRECTION('',(1.,0.));+#6140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6141 = ADVANCED_FACE('',(#6142),#2638,.F.);+#6142 = FACE_BOUND('',#6143,.F.);+#6143 = EDGE_LOOP('',(#6144,#6145,#6146,#6147));+#6144 = ORIENTED_EDGE('',*,*,#3089,.T.);+#6145 = ORIENTED_EDGE('',*,*,#2625,.T.);+#6146 = ORIENTED_EDGE('',*,*,#6041,.F.);+#6147 = ORIENTED_EDGE('',*,*,#6148,.F.);+#6148 = EDGE_CURVE('',#3090,#6042,#6149,.T.);+#6149 = SURFACE_CURVE('',#6150,(#6153,#6160),.PCURVE_S1.);+#6150 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6151,#6152),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6173 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));-#6174 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));-#6175 = PCURVE('',#2660,#6176);-#6176 = DEFINITIONAL_REPRESENTATION('',(#6177),#6181);-#6177 = LINE('',#6178,#6179);-#6178 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));-#6179 = VECTOR('',#6180,1.);-#6180 = DIRECTION('',(-2.626924014641E-16,1.));-#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6182 = PCURVE('',#3150,#6183);-#6183 = DEFINITIONAL_REPRESENTATION('',(#6184),#6188);-#6184 = LINE('',#6185,#6186);-#6185 = CARTESIAN_POINT('',(1.385,-1.143900318417E-16));-#6186 = VECTOR('',#6187,1.);-#6187 = DIRECTION('',(-2.22044604925E-16,1.));-#6188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6189 = ADVANCED_FACE('',(#6190),#2879,.F.);-#6190 = FACE_BOUND('',#6191,.F.);-#6191 = EDGE_LOOP('',(#6192,#6193,#6214,#6215,#6216,#6217));-#6192 = ORIENTED_EDGE('',*,*,#5679,.F.);-#6193 = ORIENTED_EDGE('',*,*,#6194,.T.);-#6194 = EDGE_CURVE('',#5651,#5928,#6195,.T.);-#6195 = SURFACE_CURVE('',#6196,(#6200,#6207),.PCURVE_S1.);-#6196 = LINE('',#6197,#6198);-#6197 = CARTESIAN_POINT('',(0.85,-0.7,0.9));-#6198 = VECTOR('',#6199,1.);-#6199 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6200 = PCURVE('',#2879,#6201);-#6201 = DEFINITIONAL_REPRESENTATION('',(#6202),#6206);-#6202 = LINE('',#6203,#6204);-#6203 = CARTESIAN_POINT('',(-0.,0.));-#6204 = VECTOR('',#6205,1.);-#6205 = DIRECTION('',(0.,-1.));-#6206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6207 = PCURVE('',#5667,#6208);-#6208 = DEFINITIONAL_REPRESENTATION('',(#6209),#6213);-#6209 = LINE('',#6210,#6211);-#6210 = CARTESIAN_POINT('',(4.886921905584,0.));-#6211 = VECTOR('',#6212,1.);-#6212 = DIRECTION('',(0.,-1.));-#6213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6214 = ORIENTED_EDGE('',*,*,#5951,.T.);-#6215 = ORIENTED_EDGE('',*,*,#3063,.T.);-#6216 = ORIENTED_EDGE('',*,*,#2863,.F.);-#6217 = ORIENTED_EDGE('',*,*,#5393,.F.);-#6218 = ADVANCED_FACE('',(#6219),#2929,.F.);-#6219 = FACE_BOUND('',#6220,.F.);-#6220 = EDGE_LOOP('',(#6221,#6222,#6242,#6243));-#6221 = ORIENTED_EDGE('',*,*,#3162,.T.);-#6222 = ORIENTED_EDGE('',*,*,#6223,.T.);-#6223 = EDGE_CURVE('',#3135,#6086,#6224,.T.);-#6224 = SURFACE_CURVE('',#6225,(#6228,#6235),.PCURVE_S1.);-#6225 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6226,#6227),.UNSPECIFIED.,.F.,+#6151 = CARTESIAN_POINT('',(-0.6925,-1.425,0.6));+#6152 = CARTESIAN_POINT('',(-0.667905353927,-1.375810707854,0.95));+#6153 = PCURVE('',#2638,#6154);+#6154 = DEFINITIONAL_REPRESENTATION('',(#6155),#6159);+#6155 = LINE('',#6156,#6157);+#6156 = CARTESIAN_POINT('',(7.190486470684E-18,-1.362249252212E-17));+#6157 = VECTOR('',#6158,1.);+#6158 = DIRECTION('',(-5.210663175354E-17,1.));+#6159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6160 = PCURVE('',#3128,#6161);+#6161 = DEFINITIONAL_REPRESENTATION('',(#6162),#6166);+#6162 = LINE('',#6163,#6164);+#6163 = CARTESIAN_POINT('',(1.385,2.955178933996E-16));+#6164 = VECTOR('',#6165,1.);+#6165 = DIRECTION('',(-2.22044604925E-16,1.));+#6166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6167 = ADVANCED_FACE('',(#6168),#2857,.F.);+#6168 = FACE_BOUND('',#6169,.F.);+#6169 = EDGE_LOOP('',(#6170,#6171,#6192,#6193,#6194,#6195));+#6170 = ORIENTED_EDGE('',*,*,#5657,.F.);+#6171 = ORIENTED_EDGE('',*,*,#6172,.T.);+#6172 = EDGE_CURVE('',#5629,#5906,#6173,.T.);+#6173 = SURFACE_CURVE('',#6174,(#6178,#6185),.PCURVE_S1.);+#6174 = LINE('',#6175,#6176);+#6175 = CARTESIAN_POINT('',(0.85,-0.775,0.6));+#6176 = VECTOR('',#6177,1.);+#6177 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6178 = PCURVE('',#2857,#6179);+#6179 = DEFINITIONAL_REPRESENTATION('',(#6180),#6184);+#6180 = LINE('',#6181,#6182);+#6181 = CARTESIAN_POINT('',(-0.,0.));+#6182 = VECTOR('',#6183,1.);+#6183 = DIRECTION('',(0.,-1.));+#6184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6185 = PCURVE('',#5645,#6186);+#6186 = DEFINITIONAL_REPRESENTATION('',(#6187),#6191);+#6187 = LINE('',#6188,#6189);+#6188 = CARTESIAN_POINT('',(4.886921905584,0.));+#6189 = VECTOR('',#6190,1.);+#6190 = DIRECTION('',(0.,-1.));+#6191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6192 = ORIENTED_EDGE('',*,*,#5929,.T.);+#6193 = ORIENTED_EDGE('',*,*,#3041,.T.);+#6194 = ORIENTED_EDGE('',*,*,#2841,.F.);+#6195 = ORIENTED_EDGE('',*,*,#5371,.F.);+#6196 = ADVANCED_FACE('',(#6197),#2907,.F.);+#6197 = FACE_BOUND('',#6198,.F.);+#6198 = EDGE_LOOP('',(#6199,#6200,#6220,#6221));+#6199 = ORIENTED_EDGE('',*,*,#3140,.T.);+#6200 = ORIENTED_EDGE('',*,*,#6201,.T.);+#6201 = EDGE_CURVE('',#3113,#6064,#6202,.T.);+#6202 = SURFACE_CURVE('',#6203,(#6206,#6213),.PCURVE_S1.);+#6203 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6204,#6205),.UNSPECIFIED.,.F., .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#6226 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));-#6227 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));-#6228 = PCURVE('',#2929,#6229);-#6229 = DEFINITIONAL_REPRESENTATION('',(#6230),#6234);-#6230 = LINE('',#6231,#6232);-#6231 = CARTESIAN_POINT('',(0.116672618896,-2.030544446125E-16));-#6232 = VECTOR('',#6233,1.);-#6233 = DIRECTION('',(-5.551115123126E-17,1.));-#6234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6235 = PCURVE('',#3150,#6236);+#6204 = CARTESIAN_POINT('',(0.6925,-1.425,0.6));+#6205 = CARTESIAN_POINT('',(0.667905353927,-1.375810707854,0.95));+#6206 = PCURVE('',#2907,#6207);+#6207 = DEFINITIONAL_REPRESENTATION('',(#6208),#6212);+#6208 = LINE('',#6209,#6210);+#6209 = CARTESIAN_POINT('',(0.116672618896,2.966887552301E-16));+#6210 = VECTOR('',#6211,1.);+#6211 = DIRECTION('',(4.163336342344E-17,1.));+#6212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6213 = PCURVE('',#3128,#6214);+#6214 = DEFINITIONAL_REPRESENTATION('',(#6215),#6219);+#6215 = LINE('',#6216,#6217);+#6216 = CARTESIAN_POINT('',(1.731707792598E-16,1.593979877619E-16));+#6217 = VECTOR('',#6218,1.);+#6218 = DIRECTION('',(-2.942522148409E-17,1.));+#6219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6220 = ORIENTED_EDGE('',*,*,#6085,.F.);+#6221 = ORIENTED_EDGE('',*,*,#2892,.F.);+#6222 = ADVANCED_FACE('',(#6223),#2982,.T.);+#6223 = FACE_BOUND('',#6224,.T.);+#6224 = EDGE_LOOP('',(#6225,#6226,#6227,#6228));+#6225 = ORIENTED_EDGE('',*,*,#5093,.T.);+#6226 = ORIENTED_EDGE('',*,*,#2966,.T.);+#6227 = ORIENTED_EDGE('',*,*,#5343,.F.);+#6228 = ORIENTED_EDGE('',*,*,#6229,.F.);+#6229 = EDGE_CURVE('',#5066,#5321,#6230,.T.);+#6230 = SURFACE_CURVE('',#6231,(#6235,#6242),.PCURVE_S1.);+#6231 = LINE('',#6232,#6233);+#6232 = CARTESIAN_POINT('',(1.096201938253,1.125,0.393412044417));+#6233 = VECTOR('',#6234,1.);+#6234 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6235 = PCURVE('',#2982,#6236); #6236 = DEFINITIONAL_REPRESENTATION('',(#6237),#6241); #6237 = LINE('',#6238,#6239);-#6238 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));+#6238 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); #6239 = VECTOR('',#6240,1.);-#6240 = DIRECTION('',(-1.455904003942E-16,1.));+#6240 = DIRECTION('',(0.,-1.)); #6241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#6242 = ORIENTED_EDGE('',*,*,#6107,.F.);-#6243 = ORIENTED_EDGE('',*,*,#2914,.F.);-#6244 = ADVANCED_FACE('',(#6245),#3004,.T.);-#6245 = FACE_BOUND('',#6246,.T.);-#6246 = EDGE_LOOP('',(#6247,#6248,#6249,#6250));-#6247 = ORIENTED_EDGE('',*,*,#5115,.T.);-#6248 = ORIENTED_EDGE('',*,*,#2988,.T.);-#6249 = ORIENTED_EDGE('',*,*,#5365,.F.);-#6250 = ORIENTED_EDGE('',*,*,#6251,.F.);-#6251 = EDGE_CURVE('',#5088,#5343,#6252,.T.);-#6252 = SURFACE_CURVE('',#6253,(#6257,#6264),.PCURVE_S1.);-#6253 = LINE('',#6254,#6255);-#6254 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417));-#6255 = VECTOR('',#6256,1.);-#6256 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6257 = PCURVE('',#3004,#6258);-#6258 = DEFINITIONAL_REPRESENTATION('',(#6259),#6263);-#6259 = LINE('',#6260,#6261);-#6260 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16));-#6261 = VECTOR('',#6262,1.);-#6262 = DIRECTION('',(0.,-1.));-#6263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6264 = PCURVE('',#5103,#6265);-#6265 = DEFINITIONAL_REPRESENTATION('',(#6266),#6270);-#6266 = LINE('',#6267,#6268);-#6267 = CARTESIAN_POINT('',(0.466977780811,8.420828337873E-18));-#6268 = VECTOR('',#6269,1.);-#6269 = DIRECTION('',(-1.187800808667E-29,-1.));-#6270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6271 = ADVANCED_FACE('',(#6272),#3150,.F.);-#6272 = FACE_BOUND('',#6273,.F.);-#6273 = EDGE_LOOP('',(#6274,#6275,#6276,#6277));-#6274 = ORIENTED_EDGE('',*,*,#3134,.T.);-#6275 = ORIENTED_EDGE('',*,*,#6170,.T.);-#6276 = ORIENTED_EDGE('',*,*,#6085,.F.);-#6277 = ORIENTED_EDGE('',*,*,#6223,.F.);-#6278 = ADVANCED_FACE('',(#6279),#3436,.T.);-#6279 = FACE_BOUND('',#6280,.T.);-#6280 = EDGE_LOOP('',(#6281,#6282,#6283,#6284));-#6281 = ORIENTED_EDGE('',*,*,#3419,.T.);-#6282 = ORIENTED_EDGE('',*,*,#6003,.T.);-#6283 = ORIENTED_EDGE('',*,*,#3696,.F.);-#6284 = ORIENTED_EDGE('',*,*,#6285,.F.);-#6285 = EDGE_CURVE('',#3392,#3674,#6286,.T.);-#6286 = SURFACE_CURVE('',#6287,(#6291,#6298),.PCURVE_S1.);-#6287 = LINE('',#6288,#6289);-#6288 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417));-#6289 = VECTOR('',#6290,1.);-#6290 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6291 = PCURVE('',#3436,#6292);-#6292 = DEFINITIONAL_REPRESENTATION('',(#6293),#6297);-#6293 = LINE('',#6294,#6295);-#6294 = CARTESIAN_POINT('',(6.28318530718,0.));-#6295 = VECTOR('',#6296,1.);-#6296 = DIRECTION('',(0.,-1.));-#6297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6298 = PCURVE('',#3407,#6299);-#6299 = DEFINITIONAL_REPRESENTATION('',(#6300),#6304);-#6300 = LINE('',#6301,#6302);-#6301 = CARTESIAN_POINT('',(0.466977780811,-8.67882345845E-19));-#6302 = VECTOR('',#6303,1.);-#6303 = DIRECTION('',(1.7573160551E-30,-1.));-#6304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6305 = ADVANCED_FACE('',(#6306),#3407,.F.);-#6306 = FACE_BOUND('',#6307,.F.);-#6307 = EDGE_LOOP('',(#6308,#6329,#6330,#6331));-#6308 = ORIENTED_EDGE('',*,*,#6309,.T.);-#6309 = EDGE_CURVE('',#3359,#3646,#6310,.T.);-#6310 = SURFACE_CURVE('',#6311,(#6315,#6322),.PCURVE_S1.);-#6311 = LINE('',#6312,#6313);-#6312 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233));-#6313 = VECTOR('',#6314,1.);-#6314 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6315 = PCURVE('',#3407,#6316);-#6316 = DEFINITIONAL_REPRESENTATION('',(#6317),#6321);-#6317 = LINE('',#6318,#6319);-#6318 = CARTESIAN_POINT('',(0.,0.));-#6319 = VECTOR('',#6320,1.);-#6320 = DIRECTION('',(1.7573160551E-30,-1.));-#6321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6322 = PCURVE('',#3379,#6323);-#6323 = DEFINITIONAL_REPRESENTATION('',(#6324),#6328);-#6324 = LINE('',#6325,#6326);-#6325 = CARTESIAN_POINT('',(1.396263401592,0.));-#6326 = VECTOR('',#6327,1.);-#6327 = DIRECTION('',(0.,-1.));-#6328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6329 = ORIENTED_EDGE('',*,*,#3673,.T.);-#6330 = ORIENTED_EDGE('',*,*,#6285,.F.);-#6331 = ORIENTED_EDGE('',*,*,#3391,.F.);-#6332 = ADVANCED_FACE('',(#6333),#3379,.F.);-#6333 = FACE_BOUND('',#6334,.F.);-#6334 = EDGE_LOOP('',(#6335,#6356,#6357,#6358));-#6335 = ORIENTED_EDGE('',*,*,#6336,.T.);-#6336 = EDGE_CURVE('',#3331,#3623,#6337,.T.);-#6337 = SURFACE_CURVE('',#6338,(#6342,#6349),.PCURVE_S1.);-#6338 = LINE('',#6339,#6340);-#6339 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15));-#6340 = VECTOR('',#6341,1.);-#6341 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6342 = PCURVE('',#3379,#6343);-#6343 = DEFINITIONAL_REPRESENTATION('',(#6344),#6348);-#6344 = LINE('',#6345,#6346);-#6345 = CARTESIAN_POINT('',(0.,0.));-#6346 = VECTOR('',#6347,1.);-#6347 = DIRECTION('',(0.,-1.));-#6348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6349 = PCURVE('',#3346,#6350);-#6350 = DEFINITIONAL_REPRESENTATION('',(#6351),#6355);-#6351 = LINE('',#6352,#6353);-#6352 = CARTESIAN_POINT('',(0.129469207717,-1.481435543138E-18));-#6353 = VECTOR('',#6354,1.);-#6354 = DIRECTION('',(0.,-1.));-#6355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6356 = ORIENTED_EDGE('',*,*,#3645,.T.);-#6357 = ORIENTED_EDGE('',*,*,#6309,.F.);-#6358 = ORIENTED_EDGE('',*,*,#3358,.F.);-#6359 = ADVANCED_FACE('',(#6360),#3346,.F.);-#6360 = FACE_BOUND('',#6361,.F.);-#6361 = EDGE_LOOP('',(#6362,#6383,#6384,#6385));-#6362 = ORIENTED_EDGE('',*,*,#6363,.T.);-#6363 = EDGE_CURVE('',#3303,#3600,#6364,.T.);-#6364 = SURFACE_CURVE('',#6365,(#6369,#6376),.PCURVE_S1.);-#6365 = LINE('',#6366,#6367);-#6366 = CARTESIAN_POINT('',(-1.4,-1.2,0.15));-#6367 = VECTOR('',#6368,1.);-#6368 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6369 = PCURVE('',#3346,#6370);-#6370 = DEFINITIONAL_REPRESENTATION('',(#6371),#6375);-#6371 = LINE('',#6372,#6373);-#6372 = CARTESIAN_POINT('',(0.,-0.));-#6373 = VECTOR('',#6374,1.);-#6374 = DIRECTION('',(0.,-1.));-#6375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6376 = PCURVE('',#3318,#6377);-#6377 = DEFINITIONAL_REPRESENTATION('',(#6378),#6382);-#6378 = LINE('',#6379,#6380);-#6379 = CARTESIAN_POINT('',(0.15,0.));-#6380 = VECTOR('',#6381,1.);-#6381 = DIRECTION('',(0.,-1.));-#6382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6383 = ORIENTED_EDGE('',*,*,#3622,.T.);-#6384 = ORIENTED_EDGE('',*,*,#6336,.F.);-#6385 = ORIENTED_EDGE('',*,*,#3330,.F.);-#6386 = ADVANCED_FACE('',(#6387),#3318,.F.);-#6387 = FACE_BOUND('',#6388,.F.);-#6388 = EDGE_LOOP('',(#6389,#6410,#6411,#6412));-#6389 = ORIENTED_EDGE('',*,*,#6390,.T.);-#6390 = EDGE_CURVE('',#3275,#3577,#6391,.T.);-#6391 = SURFACE_CURVE('',#6392,(#6396,#6403),.PCURVE_S1.);-#6392 = LINE('',#6393,#6394);-#6393 = CARTESIAN_POINT('',(-1.4,-1.2,0.));-#6394 = VECTOR('',#6395,1.);-#6395 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6396 = PCURVE('',#3318,#6397);-#6397 = DEFINITIONAL_REPRESENTATION('',(#6398),#6402);-#6398 = LINE('',#6399,#6400);-#6399 = CARTESIAN_POINT('',(0.,0.));-#6400 = VECTOR('',#6401,1.);-#6401 = DIRECTION('',(0.,-1.));-#6402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6403 = PCURVE('',#3290,#6404);-#6404 = DEFINITIONAL_REPRESENTATION('',(#6405),#6409);-#6405 = LINE('',#6406,#6407);-#6406 = CARTESIAN_POINT('',(0.129469207717,1.481435543138E-18));-#6407 = VECTOR('',#6408,1.);-#6408 = DIRECTION('',(0.,-1.));-#6409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6410 = ORIENTED_EDGE('',*,*,#3599,.T.);-#6411 = ORIENTED_EDGE('',*,*,#6363,.F.);-#6412 = ORIENTED_EDGE('',*,*,#3302,.F.);-#6413 = ADVANCED_FACE('',(#6414),#3290,.F.);-#6414 = FACE_BOUND('',#6415,.F.);-#6415 = EDGE_LOOP('',(#6416,#6437,#6438,#6439));-#6416 = ORIENTED_EDGE('',*,*,#6417,.T.);-#6417 = EDGE_CURVE('',#3246,#3553,#6418,.T.);-#6418 = SURFACE_CURVE('',#6419,(#6423,#6430),.PCURVE_S1.);-#6419 = LINE('',#6420,#6421);-#6420 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.));-#6421 = VECTOR('',#6422,1.);-#6422 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6423 = PCURVE('',#3290,#6424);-#6424 = DEFINITIONAL_REPRESENTATION('',(#6425),#6429);-#6425 = LINE('',#6426,#6427);-#6426 = CARTESIAN_POINT('',(0.,0.));-#6427 = VECTOR('',#6428,1.);-#6428 = DIRECTION('',(0.,-1.));-#6429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6430 = PCURVE('',#3262,#6431);-#6431 = DEFINITIONAL_REPRESENTATION('',(#6432),#6436);-#6432 = LINE('',#6433,#6434);-#6433 = CARTESIAN_POINT('',(4.886921905584,0.));-#6434 = VECTOR('',#6435,1.);-#6435 = DIRECTION('',(0.,-1.));-#6436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6437 = ORIENTED_EDGE('',*,*,#3576,.T.);-#6438 = ORIENTED_EDGE('',*,*,#6390,.F.);-#6439 = ORIENTED_EDGE('',*,*,#3274,.F.);-#6440 = ADVANCED_FACE('',(#6441),#3262,.T.);-#6441 = FACE_BOUND('',#6442,.T.);-#6442 = EDGE_LOOP('',(#6443,#6444,#6445,#6446));-#6443 = ORIENTED_EDGE('',*,*,#3245,.T.);-#6444 = ORIENTED_EDGE('',*,*,#6417,.T.);-#6445 = ORIENTED_EDGE('',*,*,#3552,.F.);-#6446 = ORIENTED_EDGE('',*,*,#6447,.F.);-#6447 = EDGE_CURVE('',#3218,#3530,#6448,.T.);-#6448 = SURFACE_CURVE('',#6449,(#6453,#6460),.PCURVE_S1.);-#6449 = LINE('',#6450,#6451);-#6450 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583));-#6451 = VECTOR('',#6452,1.);-#6452 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6453 = PCURVE('',#3262,#6454);-#6454 = DEFINITIONAL_REPRESENTATION('',(#6455),#6459);-#6455 = LINE('',#6456,#6457);-#6456 = CARTESIAN_POINT('',(6.28318530718,0.));-#6457 = VECTOR('',#6458,1.);-#6458 = DIRECTION('',(0.,-1.));-#6459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6460 = PCURVE('',#3233,#6461);-#6461 = DEFINITIONAL_REPRESENTATION('',(#6462),#6466);-#6462 = LINE('',#6463,#6464);-#6463 = CARTESIAN_POINT('',(0.466977780811,8.67882345845E-19));-#6464 = VECTOR('',#6465,1.);-#6465 = DIRECTION('',(-1.7573160551E-30,-1.));-#6466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6467 = ADVANCED_FACE('',(#6468),#3233,.F.);-#6468 = FACE_BOUND('',#6469,.F.);-#6469 = EDGE_LOOP('',(#6470,#6471,#6472,#6473));-#6470 = ORIENTED_EDGE('',*,*,#3501,.T.);-#6471 = ORIENTED_EDGE('',*,*,#3529,.T.);-#6472 = ORIENTED_EDGE('',*,*,#6447,.F.);-#6473 = ORIENTED_EDGE('',*,*,#3217,.F.);-#6474 = ADVANCED_FACE('',(#6475),#4040,.T.);-#6475 = FACE_BOUND('',#6476,.T.);-#6476 = EDGE_LOOP('',(#6477,#6478,#6479,#6480));-#6477 = ORIENTED_EDGE('',*,*,#4023,.T.);-#6478 = ORIENTED_EDGE('',*,*,#6032,.T.);-#6479 = ORIENTED_EDGE('',*,*,#4300,.F.);-#6480 = ORIENTED_EDGE('',*,*,#6481,.F.);-#6481 = EDGE_CURVE('',#3996,#4278,#6482,.T.);-#6482 = SURFACE_CURVE('',#6483,(#6487,#6494),.PCURVE_S1.);-#6483 = LINE('',#6484,#6485);-#6484 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417));-#6485 = VECTOR('',#6486,1.);-#6486 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6487 = PCURVE('',#4040,#6488);-#6488 = DEFINITIONAL_REPRESENTATION('',(#6489),#6493);-#6489 = LINE('',#6490,#6491);-#6490 = CARTESIAN_POINT('',(6.28318530718,0.));-#6491 = VECTOR('',#6492,1.);-#6492 = DIRECTION('',(0.,-1.));-#6493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6494 = PCURVE('',#4011,#6495);-#6495 = DEFINITIONAL_REPRESENTATION('',(#6496),#6500);-#6496 = LINE('',#6497,#6498);-#6497 = CARTESIAN_POINT('',(0.466977780811,-8.67882345845E-19));-#6498 = VECTOR('',#6499,1.);-#6499 = DIRECTION('',(1.7573160551E-30,-1.));-#6500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6501 = ADVANCED_FACE('',(#6502),#4011,.F.);-#6502 = FACE_BOUND('',#6503,.F.);-#6503 = EDGE_LOOP('',(#6504,#6525,#6526,#6527));-#6504 = ORIENTED_EDGE('',*,*,#6505,.T.);-#6505 = EDGE_CURVE('',#3963,#4250,#6506,.T.);-#6506 = SURFACE_CURVE('',#6507,(#6511,#6518),.PCURVE_S1.);-#6507 = LINE('',#6508,#6509);-#6508 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233));-#6509 = VECTOR('',#6510,1.);-#6510 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6511 = PCURVE('',#4011,#6512);-#6512 = DEFINITIONAL_REPRESENTATION('',(#6513),#6517);-#6513 = LINE('',#6514,#6515);-#6514 = CARTESIAN_POINT('',(0.,0.));-#6515 = VECTOR('',#6516,1.);-#6516 = DIRECTION('',(1.7573160551E-30,-1.));-#6517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6518 = PCURVE('',#3983,#6519);-#6519 = DEFINITIONAL_REPRESENTATION('',(#6520),#6524);-#6520 = LINE('',#6521,#6522);-#6521 = CARTESIAN_POINT('',(1.396263401592,0.));-#6522 = VECTOR('',#6523,1.);-#6523 = DIRECTION('',(0.,-1.));-#6524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6525 = ORIENTED_EDGE('',*,*,#4277,.T.);-#6526 = ORIENTED_EDGE('',*,*,#6481,.F.);-#6527 = ORIENTED_EDGE('',*,*,#3995,.F.);-#6528 = ADVANCED_FACE('',(#6529),#3983,.F.);-#6529 = FACE_BOUND('',#6530,.F.);-#6530 = EDGE_LOOP('',(#6531,#6552,#6553,#6554));-#6531 = ORIENTED_EDGE('',*,*,#6532,.T.);-#6532 = EDGE_CURVE('',#3935,#4227,#6533,.T.);-#6533 = SURFACE_CURVE('',#6534,(#6538,#6545),.PCURVE_S1.);-#6534 = LINE('',#6535,#6536);-#6535 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15));-#6536 = VECTOR('',#6537,1.);-#6537 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6538 = PCURVE('',#3983,#6539);-#6539 = DEFINITIONAL_REPRESENTATION('',(#6540),#6544);-#6540 = LINE('',#6541,#6542);-#6541 = CARTESIAN_POINT('',(0.,0.));-#6542 = VECTOR('',#6543,1.);-#6543 = DIRECTION('',(0.,-1.));-#6544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6545 = PCURVE('',#3950,#6546);-#6546 = DEFINITIONAL_REPRESENTATION('',(#6547),#6551);-#6547 = LINE('',#6548,#6549);-#6548 = CARTESIAN_POINT('',(0.129469207717,-1.481435543138E-18));-#6549 = VECTOR('',#6550,1.);-#6550 = DIRECTION('',(0.,-1.));-#6551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6552 = ORIENTED_EDGE('',*,*,#4249,.T.);-#6553 = ORIENTED_EDGE('',*,*,#6505,.F.);-#6554 = ORIENTED_EDGE('',*,*,#3962,.F.);-#6555 = ADVANCED_FACE('',(#6556),#3950,.F.);-#6556 = FACE_BOUND('',#6557,.F.);-#6557 = EDGE_LOOP('',(#6558,#6579,#6580,#6581));-#6558 = ORIENTED_EDGE('',*,*,#6559,.T.);-#6559 = EDGE_CURVE('',#3907,#4204,#6560,.T.);-#6560 = SURFACE_CURVE('',#6561,(#6565,#6572),.PCURVE_S1.);-#6561 = LINE('',#6562,#6563);-#6562 = CARTESIAN_POINT('',(-1.4,-0.25,0.15));-#6563 = VECTOR('',#6564,1.);-#6564 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6565 = PCURVE('',#3950,#6566);-#6566 = DEFINITIONAL_REPRESENTATION('',(#6567),#6571);-#6567 = LINE('',#6568,#6569);-#6568 = CARTESIAN_POINT('',(0.,-0.));-#6569 = VECTOR('',#6570,1.);-#6570 = DIRECTION('',(0.,-1.));-#6571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6572 = PCURVE('',#3922,#6573);-#6573 = DEFINITIONAL_REPRESENTATION('',(#6574),#6578);-#6574 = LINE('',#6575,#6576);-#6575 = CARTESIAN_POINT('',(0.15,0.));-#6576 = VECTOR('',#6577,1.);-#6577 = DIRECTION('',(0.,-1.));-#6578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6579 = ORIENTED_EDGE('',*,*,#4226,.T.);-#6580 = ORIENTED_EDGE('',*,*,#6532,.F.);-#6581 = ORIENTED_EDGE('',*,*,#3934,.F.);-#6582 = ADVANCED_FACE('',(#6583),#3922,.F.);-#6583 = FACE_BOUND('',#6584,.F.);-#6584 = EDGE_LOOP('',(#6585,#6606,#6607,#6608));-#6585 = ORIENTED_EDGE('',*,*,#6586,.T.);-#6586 = EDGE_CURVE('',#3879,#4181,#6587,.T.);-#6587 = SURFACE_CURVE('',#6588,(#6592,#6599),.PCURVE_S1.);-#6588 = LINE('',#6589,#6590);-#6589 = CARTESIAN_POINT('',(-1.4,-0.25,0.));-#6590 = VECTOR('',#6591,1.);-#6591 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6592 = PCURVE('',#3922,#6593);-#6593 = DEFINITIONAL_REPRESENTATION('',(#6594),#6598);-#6594 = LINE('',#6595,#6596);-#6595 = CARTESIAN_POINT('',(0.,0.));-#6596 = VECTOR('',#6597,1.);-#6597 = DIRECTION('',(0.,-1.));-#6598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6599 = PCURVE('',#3894,#6600);-#6600 = DEFINITIONAL_REPRESENTATION('',(#6601),#6605);-#6601 = LINE('',#6602,#6603);-#6602 = CARTESIAN_POINT('',(0.129469207717,1.481435543138E-18));-#6603 = VECTOR('',#6604,1.);-#6604 = DIRECTION('',(0.,-1.));-#6605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6606 = ORIENTED_EDGE('',*,*,#4203,.T.);-#6607 = ORIENTED_EDGE('',*,*,#6559,.F.);-#6608 = ORIENTED_EDGE('',*,*,#3906,.F.);-#6609 = ADVANCED_FACE('',(#6610),#3894,.F.);-#6610 = FACE_BOUND('',#6611,.F.);-#6611 = EDGE_LOOP('',(#6612,#6633,#6634,#6635));-#6612 = ORIENTED_EDGE('',*,*,#6613,.T.);-#6613 = EDGE_CURVE('',#3850,#4157,#6614,.T.);-#6614 = SURFACE_CURVE('',#6615,(#6619,#6626),.PCURVE_S1.);-#6615 = LINE('',#6616,#6617);-#6616 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.));-#6617 = VECTOR('',#6618,1.);-#6618 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6619 = PCURVE('',#3894,#6620);-#6620 = DEFINITIONAL_REPRESENTATION('',(#6621),#6625);-#6621 = LINE('',#6622,#6623);-#6622 = CARTESIAN_POINT('',(0.,0.));-#6623 = VECTOR('',#6624,1.);-#6624 = DIRECTION('',(0.,-1.));-#6625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6626 = PCURVE('',#3866,#6627);-#6627 = DEFINITIONAL_REPRESENTATION('',(#6628),#6632);-#6628 = LINE('',#6629,#6630);-#6629 = CARTESIAN_POINT('',(4.886921905584,0.));-#6630 = VECTOR('',#6631,1.);-#6631 = DIRECTION('',(0.,-1.));-#6632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6633 = ORIENTED_EDGE('',*,*,#4180,.T.);-#6634 = ORIENTED_EDGE('',*,*,#6586,.F.);-#6635 = ORIENTED_EDGE('',*,*,#3878,.F.);-#6636 = ADVANCED_FACE('',(#6637),#3866,.T.);-#6637 = FACE_BOUND('',#6638,.T.);-#6638 = EDGE_LOOP('',(#6639,#6640,#6641,#6642));-#6639 = ORIENTED_EDGE('',*,*,#3849,.T.);-#6640 = ORIENTED_EDGE('',*,*,#6613,.T.);-#6641 = ORIENTED_EDGE('',*,*,#4156,.F.);-#6642 = ORIENTED_EDGE('',*,*,#6643,.F.);-#6643 = EDGE_CURVE('',#3822,#4134,#6644,.T.);-#6644 = SURFACE_CURVE('',#6645,(#6649,#6656),.PCURVE_S1.);-#6645 = LINE('',#6646,#6647);-#6646 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583));-#6647 = VECTOR('',#6648,1.);-#6648 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6649 = PCURVE('',#3866,#6650);-#6650 = DEFINITIONAL_REPRESENTATION('',(#6651),#6655);-#6651 = LINE('',#6652,#6653);-#6652 = CARTESIAN_POINT('',(6.28318530718,0.));-#6653 = VECTOR('',#6654,1.);-#6654 = DIRECTION('',(0.,-1.));-#6655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6656 = PCURVE('',#3837,#6657);-#6657 = DEFINITIONAL_REPRESENTATION('',(#6658),#6662);-#6658 = LINE('',#6659,#6660);-#6659 = CARTESIAN_POINT('',(0.466977780811,8.67882345845E-19));-#6660 = VECTOR('',#6661,1.);-#6661 = DIRECTION('',(-1.7573160551E-30,-1.));-#6662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6663 = ADVANCED_FACE('',(#6664),#3837,.F.);-#6664 = FACE_BOUND('',#6665,.F.);-#6665 = EDGE_LOOP('',(#6666,#6667,#6668,#6669));-#6666 = ORIENTED_EDGE('',*,*,#4105,.T.);-#6667 = ORIENTED_EDGE('',*,*,#4133,.T.);-#6668 = ORIENTED_EDGE('',*,*,#6643,.F.);-#6669 = ORIENTED_EDGE('',*,*,#3821,.F.);-#6670 = ADVANCED_FACE('',(#6671),#4595,.F.);-#6671 = FACE_BOUND('',#6672,.F.);-#6672 = EDGE_LOOP('',(#6673,#6694,#6695,#6696));-#6673 = ORIENTED_EDGE('',*,*,#6674,.T.);-#6674 = EDGE_CURVE('',#4547,#4807,#6675,.T.);-#6675 = SURFACE_CURVE('',#6676,(#6680,#6687),.PCURVE_S1.);-#6676 = LINE('',#6677,#6678);-#6677 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233));-#6678 = VECTOR('',#6679,1.);-#6679 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6680 = PCURVE('',#4595,#6681);-#6681 = DEFINITIONAL_REPRESENTATION('',(#6682),#6686);-#6682 = LINE('',#6683,#6684);-#6683 = CARTESIAN_POINT('',(0.,0.));-#6684 = VECTOR('',#6685,1.);-#6685 = DIRECTION('',(1.7573160551E-30,-1.));-#6686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6687 = PCURVE('',#4567,#6688);-#6688 = DEFINITIONAL_REPRESENTATION('',(#6689),#6693);-#6689 = LINE('',#6690,#6691);-#6690 = CARTESIAN_POINT('',(1.396263401592,0.));-#6691 = VECTOR('',#6692,1.);-#6692 = DIRECTION('',(0.,-1.));-#6693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6694 = ORIENTED_EDGE('',*,*,#4834,.T.);-#6695 = ORIENTED_EDGE('',*,*,#5978,.F.);-#6696 = ORIENTED_EDGE('',*,*,#4579,.F.);-#6697 = ADVANCED_FACE('',(#6698),#4567,.F.);-#6698 = FACE_BOUND('',#6699,.F.);-#6699 = EDGE_LOOP('',(#6700,#6721,#6722,#6723));-#6700 = ORIENTED_EDGE('',*,*,#6701,.T.);-#6701 = EDGE_CURVE('',#4519,#4784,#6702,.T.);-#6702 = SURFACE_CURVE('',#6703,(#6707,#6714),.PCURVE_S1.);-#6703 = LINE('',#6704,#6705);-#6704 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15));-#6705 = VECTOR('',#6706,1.);-#6706 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6707 = PCURVE('',#4567,#6708);-#6708 = DEFINITIONAL_REPRESENTATION('',(#6709),#6713);-#6709 = LINE('',#6710,#6711);-#6710 = CARTESIAN_POINT('',(0.,0.));-#6711 = VECTOR('',#6712,1.);-#6712 = DIRECTION('',(0.,-1.));-#6713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6714 = PCURVE('',#4534,#6715);-#6715 = DEFINITIONAL_REPRESENTATION('',(#6716),#6720);-#6716 = LINE('',#6717,#6718);-#6717 = CARTESIAN_POINT('',(0.129469207717,-1.481435543138E-18));-#6718 = VECTOR('',#6719,1.);-#6719 = DIRECTION('',(0.,-1.));-#6720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6721 = ORIENTED_EDGE('',*,*,#4806,.T.);-#6722 = ORIENTED_EDGE('',*,*,#6674,.F.);-#6723 = ORIENTED_EDGE('',*,*,#4546,.F.);-#6724 = ADVANCED_FACE('',(#6725),#4534,.F.);-#6725 = FACE_BOUND('',#6726,.F.);-#6726 = EDGE_LOOP('',(#6727,#6748,#6749,#6750));-#6727 = ORIENTED_EDGE('',*,*,#6728,.T.);-#6728 = EDGE_CURVE('',#4491,#4761,#6729,.T.);-#6729 = SURFACE_CURVE('',#6730,(#6734,#6741),.PCURVE_S1.);-#6730 = LINE('',#6731,#6732);-#6731 = CARTESIAN_POINT('',(-1.4,0.7,0.15));-#6732 = VECTOR('',#6733,1.);-#6733 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6734 = PCURVE('',#4534,#6735);-#6735 = DEFINITIONAL_REPRESENTATION('',(#6736),#6740);-#6736 = LINE('',#6737,#6738);-#6737 = CARTESIAN_POINT('',(0.,-0.));-#6738 = VECTOR('',#6739,1.);-#6739 = DIRECTION('',(0.,-1.));-#6740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6741 = PCURVE('',#4506,#6742);-#6742 = DEFINITIONAL_REPRESENTATION('',(#6743),#6747);-#6743 = LINE('',#6744,#6745);-#6744 = CARTESIAN_POINT('',(0.15,0.));-#6745 = VECTOR('',#6746,1.);-#6746 = DIRECTION('',(0.,-1.));-#6747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6748 = ORIENTED_EDGE('',*,*,#4783,.T.);-#6749 = ORIENTED_EDGE('',*,*,#6701,.F.);-#6750 = ORIENTED_EDGE('',*,*,#4518,.F.);-#6751 = ADVANCED_FACE('',(#6752),#4506,.F.);-#6752 = FACE_BOUND('',#6753,.F.);-#6753 = EDGE_LOOP('',(#6754,#6775,#6776,#6777));-#6754 = ORIENTED_EDGE('',*,*,#6755,.T.);-#6755 = EDGE_CURVE('',#4463,#4738,#6756,.T.);-#6756 = SURFACE_CURVE('',#6757,(#6761,#6768),.PCURVE_S1.);-#6757 = LINE('',#6758,#6759);-#6758 = CARTESIAN_POINT('',(-1.4,0.7,0.));-#6759 = VECTOR('',#6760,1.);-#6760 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6761 = PCURVE('',#4506,#6762);-#6762 = DEFINITIONAL_REPRESENTATION('',(#6763),#6767);-#6763 = LINE('',#6764,#6765);-#6764 = CARTESIAN_POINT('',(0.,0.));-#6765 = VECTOR('',#6766,1.);-#6766 = DIRECTION('',(0.,-1.));-#6767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6768 = PCURVE('',#4478,#6769);-#6769 = DEFINITIONAL_REPRESENTATION('',(#6770),#6774);-#6770 = LINE('',#6771,#6772);-#6771 = CARTESIAN_POINT('',(0.129469207717,1.481435543138E-18));-#6772 = VECTOR('',#6773,1.);-#6773 = DIRECTION('',(0.,-1.));-#6774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6775 = ORIENTED_EDGE('',*,*,#4760,.T.);-#6776 = ORIENTED_EDGE('',*,*,#6728,.F.);-#6777 = ORIENTED_EDGE('',*,*,#4490,.F.);-#6778 = ADVANCED_FACE('',(#6779),#4478,.F.);-#6779 = FACE_BOUND('',#6780,.F.);-#6780 = EDGE_LOOP('',(#6781,#6802,#6803,#6804));-#6781 = ORIENTED_EDGE('',*,*,#6782,.T.);-#6782 = EDGE_CURVE('',#4434,#4714,#6783,.T.);-#6783 = SURFACE_CURVE('',#6784,(#6788,#6795),.PCURVE_S1.);-#6784 = LINE('',#6785,#6786);-#6785 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.));-#6786 = VECTOR('',#6787,1.);-#6787 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6788 = PCURVE('',#4478,#6789);-#6789 = DEFINITIONAL_REPRESENTATION('',(#6790),#6794);-#6790 = LINE('',#6791,#6792);-#6791 = CARTESIAN_POINT('',(0.,0.));-#6792 = VECTOR('',#6793,1.);-#6793 = DIRECTION('',(0.,-1.));-#6794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6795 = PCURVE('',#4450,#6796);-#6796 = DEFINITIONAL_REPRESENTATION('',(#6797),#6801);-#6797 = LINE('',#6798,#6799);-#6798 = CARTESIAN_POINT('',(4.886921905584,0.));-#6799 = VECTOR('',#6800,1.);-#6800 = DIRECTION('',(0.,-1.));-#6801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6802 = ORIENTED_EDGE('',*,*,#4737,.T.);-#6803 = ORIENTED_EDGE('',*,*,#6755,.F.);-#6804 = ORIENTED_EDGE('',*,*,#4462,.F.);-#6805 = ADVANCED_FACE('',(#6806),#4450,.T.);-#6806 = FACE_BOUND('',#6807,.T.);-#6807 = EDGE_LOOP('',(#6808,#6809,#6810,#6811));-#6808 = ORIENTED_EDGE('',*,*,#4433,.T.);-#6809 = ORIENTED_EDGE('',*,*,#6782,.T.);-#6810 = ORIENTED_EDGE('',*,*,#4713,.F.);-#6811 = ORIENTED_EDGE('',*,*,#6812,.F.);-#6812 = EDGE_CURVE('',#4406,#4691,#6813,.T.);-#6813 = SURFACE_CURVE('',#6814,(#6818,#6825),.PCURVE_S1.);-#6814 = LINE('',#6815,#6816);-#6815 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583));-#6816 = VECTOR('',#6817,1.);-#6817 = DIRECTION('',(1.144237745222E-17,1.,0.));-#6818 = PCURVE('',#4450,#6819);-#6819 = DEFINITIONAL_REPRESENTATION('',(#6820),#6824);-#6820 = LINE('',#6821,#6822);-#6821 = CARTESIAN_POINT('',(6.28318530718,0.));-#6822 = VECTOR('',#6823,1.);-#6823 = DIRECTION('',(0.,-1.));-#6824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6825 = PCURVE('',#4421,#6826);-#6826 = DEFINITIONAL_REPRESENTATION('',(#6827),#6831);-#6827 = LINE('',#6828,#6829);-#6828 = CARTESIAN_POINT('',(0.466977780811,8.67882345845E-19));-#6829 = VECTOR('',#6830,1.);-#6830 = DIRECTION('',(-1.7573160551E-30,-1.));-#6831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6832 = ADVANCED_FACE('',(#6833),#4421,.F.);-#6833 = FACE_BOUND('',#6834,.F.);-#6834 = EDGE_LOOP('',(#6835,#6836,#6837,#6838));-#6835 = ORIENTED_EDGE('',*,*,#4662,.T.);-#6836 = ORIENTED_EDGE('',*,*,#4690,.T.);-#6837 = ORIENTED_EDGE('',*,*,#6812,.F.);-#6838 = ORIENTED_EDGE('',*,*,#4405,.F.);-#6839 = ADVANCED_FACE('',(#6840),#5103,.F.);-#6840 = FACE_BOUND('',#6841,.F.);-#6841 = EDGE_LOOP('',(#6842,#6863,#6864,#6865));-#6842 = ORIENTED_EDGE('',*,*,#6843,.T.);-#6843 = EDGE_CURVE('',#5055,#5315,#6844,.T.);-#6844 = SURFACE_CURVE('',#6845,(#6849,#6856),.PCURVE_S1.);-#6845 = LINE('',#6846,#6847);-#6846 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233));-#6847 = VECTOR('',#6848,1.);-#6848 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6849 = PCURVE('',#5103,#6850);-#6850 = DEFINITIONAL_REPRESENTATION('',(#6851),#6855);-#6851 = LINE('',#6852,#6853);-#6852 = CARTESIAN_POINT('',(0.,0.));-#6853 = VECTOR('',#6854,1.);-#6854 = DIRECTION('',(-1.187800808667E-29,-1.));-#6855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6856 = PCURVE('',#5075,#6857);-#6857 = DEFINITIONAL_REPRESENTATION('',(#6858),#6862);-#6858 = LINE('',#6859,#6860);-#6859 = CARTESIAN_POINT('',(1.396263401592,0.));-#6860 = VECTOR('',#6861,1.);-#6861 = DIRECTION('',(8.881784197001E-16,-1.));-#6862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6863 = ORIENTED_EDGE('',*,*,#5342,.T.);-#6864 = ORIENTED_EDGE('',*,*,#6251,.F.);-#6865 = ORIENTED_EDGE('',*,*,#5087,.F.);-#6866 = ADVANCED_FACE('',(#6867),#5075,.F.);-#6867 = FACE_BOUND('',#6868,.F.);-#6868 = EDGE_LOOP('',(#6869,#6890,#6891,#6892));-#6869 = ORIENTED_EDGE('',*,*,#6870,.T.);-#6870 = EDGE_CURVE('',#5027,#5292,#6871,.T.);-#6871 = SURFACE_CURVE('',#6872,(#6876,#6883),.PCURVE_S1.);-#6872 = LINE('',#6873,#6874);-#6873 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15));-#6874 = VECTOR('',#6875,1.);-#6875 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6876 = PCURVE('',#5075,#6877);-#6877 = DEFINITIONAL_REPRESENTATION('',(#6878),#6882);-#6878 = LINE('',#6879,#6880);-#6879 = CARTESIAN_POINT('',(0.,0.));-#6880 = VECTOR('',#6881,1.);-#6881 = DIRECTION('',(0.,-1.));-#6882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6883 = PCURVE('',#5042,#6884);-#6884 = DEFINITIONAL_REPRESENTATION('',(#6885),#6889);-#6885 = LINE('',#6886,#6887);-#6886 = CARTESIAN_POINT('',(0.129469207717,1.437396953874E-17));-#6887 = VECTOR('',#6888,1.);-#6888 = DIRECTION('',(0.,-1.));-#6889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6890 = ORIENTED_EDGE('',*,*,#5314,.T.);-#6891 = ORIENTED_EDGE('',*,*,#6843,.F.);-#6892 = ORIENTED_EDGE('',*,*,#5054,.F.);-#6893 = ADVANCED_FACE('',(#6894),#5042,.F.);-#6894 = FACE_BOUND('',#6895,.F.);-#6895 = EDGE_LOOP('',(#6896,#6917,#6918,#6919));-#6896 = ORIENTED_EDGE('',*,*,#6897,.T.);-#6897 = EDGE_CURVE('',#4999,#5269,#6898,.T.);-#6898 = SURFACE_CURVE('',#6899,(#6903,#6910),.PCURVE_S1.);-#6899 = LINE('',#6900,#6901);-#6900 = CARTESIAN_POINT('',(1.4,1.2,0.15));-#6901 = VECTOR('',#6902,1.);-#6902 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6903 = PCURVE('',#5042,#6904);-#6904 = DEFINITIONAL_REPRESENTATION('',(#6905),#6909);-#6905 = LINE('',#6906,#6907);-#6906 = CARTESIAN_POINT('',(-0.,0.));-#6907 = VECTOR('',#6908,1.);-#6908 = DIRECTION('',(0.,-1.));-#6909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6910 = PCURVE('',#5014,#6911);-#6911 = DEFINITIONAL_REPRESENTATION('',(#6912),#6916);-#6912 = LINE('',#6913,#6914);-#6913 = CARTESIAN_POINT('',(0.15,0.));-#6914 = VECTOR('',#6915,1.);-#6915 = DIRECTION('',(0.,-1.));-#6916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6917 = ORIENTED_EDGE('',*,*,#5291,.T.);-#6918 = ORIENTED_EDGE('',*,*,#6870,.F.);-#6919 = ORIENTED_EDGE('',*,*,#5026,.F.);-#6920 = ADVANCED_FACE('',(#6921),#5014,.F.);-#6921 = FACE_BOUND('',#6922,.F.);-#6922 = EDGE_LOOP('',(#6923,#6944,#6945,#6946));-#6923 = ORIENTED_EDGE('',*,*,#6924,.T.);-#6924 = EDGE_CURVE('',#4971,#5246,#6925,.T.);-#6925 = SURFACE_CURVE('',#6926,(#6930,#6937),.PCURVE_S1.);-#6926 = LINE('',#6927,#6928);-#6927 = CARTESIAN_POINT('',(1.4,1.2,0.));-#6928 = VECTOR('',#6929,1.);-#6929 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6930 = PCURVE('',#5014,#6931);-#6931 = DEFINITIONAL_REPRESENTATION('',(#6932),#6936);-#6932 = LINE('',#6933,#6934);-#6933 = CARTESIAN_POINT('',(0.,0.));-#6934 = VECTOR('',#6935,1.);-#6935 = DIRECTION('',(0.,-1.));-#6936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6937 = PCURVE('',#4986,#6938);-#6938 = DEFINITIONAL_REPRESENTATION('',(#6939),#6943);-#6939 = LINE('',#6940,#6941);-#6940 = CARTESIAN_POINT('',(0.129469207717,-1.437396953874E-17));-#6941 = VECTOR('',#6942,1.);-#6942 = DIRECTION('',(0.,-1.));-#6943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6944 = ORIENTED_EDGE('',*,*,#5268,.T.);-#6945 = ORIENTED_EDGE('',*,*,#6897,.F.);-#6946 = ORIENTED_EDGE('',*,*,#4998,.F.);-#6947 = ADVANCED_FACE('',(#6948),#4986,.F.);-#6948 = FACE_BOUND('',#6949,.F.);-#6949 = EDGE_LOOP('',(#6950,#6971,#6972,#6973));-#6950 = ORIENTED_EDGE('',*,*,#6951,.T.);-#6951 = EDGE_CURVE('',#4942,#5222,#6952,.T.);-#6952 = SURFACE_CURVE('',#6953,(#6957,#6964),.PCURVE_S1.);-#6953 = LINE('',#6954,#6955);-#6954 = CARTESIAN_POINT('',(1.270530792283,1.2,0.));-#6955 = VECTOR('',#6956,1.);-#6956 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6957 = PCURVE('',#4986,#6958);-#6958 = DEFINITIONAL_REPRESENTATION('',(#6959),#6963);-#6959 = LINE('',#6960,#6961);-#6960 = CARTESIAN_POINT('',(0.,0.));-#6961 = VECTOR('',#6962,1.);-#6962 = DIRECTION('',(0.,-1.));-#6963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6964 = PCURVE('',#4958,#6965);-#6965 = DEFINITIONAL_REPRESENTATION('',(#6966),#6970);-#6966 = LINE('',#6967,#6968);-#6967 = CARTESIAN_POINT('',(4.886921905584,0.));-#6968 = VECTOR('',#6969,1.);-#6969 = DIRECTION('',(1.7763568394E-15,-1.));-#6970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6971 = ORIENTED_EDGE('',*,*,#5245,.T.);-#6972 = ORIENTED_EDGE('',*,*,#6924,.F.);-#6973 = ORIENTED_EDGE('',*,*,#4970,.F.);-#6974 = ADVANCED_FACE('',(#6975),#4958,.T.);-#6975 = FACE_BOUND('',#6976,.T.);-#6976 = EDGE_LOOP('',(#6977,#6978,#6979,#6980));-#6977 = ORIENTED_EDGE('',*,*,#4941,.T.);-#6978 = ORIENTED_EDGE('',*,*,#6951,.T.);-#6979 = ORIENTED_EDGE('',*,*,#5221,.F.);-#6980 = ORIENTED_EDGE('',*,*,#6981,.F.);-#6981 = EDGE_CURVE('',#4914,#5199,#6982,.T.);-#6982 = SURFACE_CURVE('',#6983,(#6987,#6994),.PCURVE_S1.);-#6983 = LINE('',#6984,#6985);-#6984 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583));-#6985 = VECTOR('',#6986,1.);-#6986 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#6987 = PCURVE('',#4958,#6988);-#6988 = DEFINITIONAL_REPRESENTATION('',(#6989),#6993);-#6989 = LINE('',#6990,#6991);-#6990 = CARTESIAN_POINT('',(6.28318530718,0.));-#6991 = VECTOR('',#6992,1.);-#6992 = DIRECTION('',(0.,-1.));-#6993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#6994 = PCURVE('',#4929,#6995);-#6995 = DEFINITIONAL_REPRESENTATION('',(#6996),#7000);-#6996 = LINE('',#6997,#6998);-#6997 = CARTESIAN_POINT('',(0.466977780811,-8.420828337873E-18));-#6998 = VECTOR('',#6999,1.);-#6999 = DIRECTION('',(1.187800808667E-29,-1.));-#7000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7001 = ADVANCED_FACE('',(#7002),#4929,.F.);-#7002 = FACE_BOUND('',#7003,.F.);-#7003 = EDGE_LOOP('',(#7004,#7005,#7006,#7007));-#7004 = ORIENTED_EDGE('',*,*,#5170,.T.);-#7005 = ORIENTED_EDGE('',*,*,#5198,.T.);-#7006 = ORIENTED_EDGE('',*,*,#6981,.F.);-#7007 = ORIENTED_EDGE('',*,*,#4913,.F.);-#7008 = ADVANCED_FACE('',(#7009),#5667,.T.);-#7009 = FACE_BOUND('',#7010,.T.);-#7010 = EDGE_LOOP('',(#7011,#7012,#7013,#7014));-#7011 = ORIENTED_EDGE('',*,*,#5650,.T.);-#7012 = ORIENTED_EDGE('',*,*,#6194,.T.);-#7013 = ORIENTED_EDGE('',*,*,#5927,.F.);-#7014 = ORIENTED_EDGE('',*,*,#7015,.F.);-#7015 = EDGE_CURVE('',#5623,#5905,#7016,.T.);-#7016 = SURFACE_CURVE('',#7017,(#7021,#7028),.PCURVE_S1.);-#7017 = LINE('',#7018,#7019);-#7018 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417));-#7019 = VECTOR('',#7020,1.);-#7020 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7021 = PCURVE('',#5667,#7022);-#7022 = DEFINITIONAL_REPRESENTATION('',(#7023),#7027);-#7023 = LINE('',#7024,#7025);-#7024 = CARTESIAN_POINT('',(6.28318530718,0.));-#7025 = VECTOR('',#7026,1.);-#7026 = DIRECTION('',(0.,-1.));-#7027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7028 = PCURVE('',#5638,#7029);-#7029 = DEFINITIONAL_REPRESENTATION('',(#7030),#7034);-#7030 = LINE('',#7031,#7032);-#7031 = CARTESIAN_POINT('',(0.466977780811,8.420828337873E-18));-#7032 = VECTOR('',#7033,1.);-#7033 = DIRECTION('',(-1.187800808667E-29,-1.));-#7034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7035 = ADVANCED_FACE('',(#7036),#5638,.F.);-#7036 = FACE_BOUND('',#7037,.F.);-#7037 = EDGE_LOOP('',(#7038,#7059,#7060,#7061));-#7038 = ORIENTED_EDGE('',*,*,#7039,.T.);-#7039 = EDGE_CURVE('',#5590,#5877,#7040,.T.);-#7040 = SURFACE_CURVE('',#7041,(#7045,#7052),.PCURVE_S1.);-#7041 = LINE('',#7042,#7043);-#7042 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233));-#7043 = VECTOR('',#7044,1.);-#7044 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7045 = PCURVE('',#5638,#7046);-#7046 = DEFINITIONAL_REPRESENTATION('',(#7047),#7051);-#7047 = LINE('',#7048,#7049);-#7048 = CARTESIAN_POINT('',(0.,0.));-#7049 = VECTOR('',#7050,1.);-#7050 = DIRECTION('',(-1.187800808667E-29,-1.));-#7051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7052 = PCURVE('',#5610,#7053);-#7053 = DEFINITIONAL_REPRESENTATION('',(#7054),#7058);-#7054 = LINE('',#7055,#7056);-#7055 = CARTESIAN_POINT('',(1.396263401592,0.));-#7056 = VECTOR('',#7057,1.);-#7057 = DIRECTION('',(8.881784197001E-16,-1.));-#7058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7059 = ORIENTED_EDGE('',*,*,#5904,.T.);-#7060 = ORIENTED_EDGE('',*,*,#7015,.F.);-#7061 = ORIENTED_EDGE('',*,*,#5622,.F.);-#7062 = ADVANCED_FACE('',(#7063),#5610,.F.);-#7063 = FACE_BOUND('',#7064,.F.);-#7064 = EDGE_LOOP('',(#7065,#7086,#7087,#7088));-#7065 = ORIENTED_EDGE('',*,*,#7066,.T.);-#7066 = EDGE_CURVE('',#5562,#5854,#7067,.T.);-#7067 = SURFACE_CURVE('',#7068,(#7072,#7079),.PCURVE_S1.);-#7068 = LINE('',#7069,#7070);-#7069 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15));-#7070 = VECTOR('',#7071,1.);-#7071 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7072 = PCURVE('',#5610,#7073);-#7073 = DEFINITIONAL_REPRESENTATION('',(#7074),#7078);-#7074 = LINE('',#7075,#7076);-#7075 = CARTESIAN_POINT('',(0.,0.));-#7076 = VECTOR('',#7077,1.);-#7077 = DIRECTION('',(0.,-1.));-#7078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7079 = PCURVE('',#5577,#7080);-#7080 = DEFINITIONAL_REPRESENTATION('',(#7081),#7085);-#7081 = LINE('',#7082,#7083);-#7082 = CARTESIAN_POINT('',(0.129469207717,1.437396953874E-17));-#7083 = VECTOR('',#7084,1.);-#7084 = DIRECTION('',(0.,-1.));-#7085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7086 = ORIENTED_EDGE('',*,*,#5876,.T.);-#7087 = ORIENTED_EDGE('',*,*,#7039,.F.);-#7088 = ORIENTED_EDGE('',*,*,#5589,.F.);-#7089 = ADVANCED_FACE('',(#7090),#5577,.F.);-#7090 = FACE_BOUND('',#7091,.F.);-#7091 = EDGE_LOOP('',(#7092,#7113,#7114,#7115));-#7092 = ORIENTED_EDGE('',*,*,#7093,.T.);-#7093 = EDGE_CURVE('',#5534,#5831,#7094,.T.);-#7094 = SURFACE_CURVE('',#7095,(#7099,#7106),.PCURVE_S1.);-#7095 = LINE('',#7096,#7097);-#7096 = CARTESIAN_POINT('',(1.4,-0.7,0.15));-#7097 = VECTOR('',#7098,1.);-#7098 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7099 = PCURVE('',#5577,#7100);-#7100 = DEFINITIONAL_REPRESENTATION('',(#7101),#7105);-#7101 = LINE('',#7102,#7103);-#7102 = CARTESIAN_POINT('',(-0.,0.));-#7103 = VECTOR('',#7104,1.);-#7104 = DIRECTION('',(0.,-1.));-#7105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7106 = PCURVE('',#5549,#7107);-#7107 = DEFINITIONAL_REPRESENTATION('',(#7108),#7112);-#7108 = LINE('',#7109,#7110);-#7109 = CARTESIAN_POINT('',(0.15,0.));-#7110 = VECTOR('',#7111,1.);-#7111 = DIRECTION('',(0.,-1.));-#7112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7113 = ORIENTED_EDGE('',*,*,#5853,.T.);-#7114 = ORIENTED_EDGE('',*,*,#7066,.F.);-#7115 = ORIENTED_EDGE('',*,*,#5561,.F.);-#7116 = ADVANCED_FACE('',(#7117),#5549,.F.);-#7117 = FACE_BOUND('',#7118,.F.);-#7118 = EDGE_LOOP('',(#7119,#7140,#7141,#7142));-#7119 = ORIENTED_EDGE('',*,*,#7120,.T.);-#7120 = EDGE_CURVE('',#5506,#5808,#7121,.T.);-#7121 = SURFACE_CURVE('',#7122,(#7126,#7133),.PCURVE_S1.);-#7122 = LINE('',#7123,#7124);-#7123 = CARTESIAN_POINT('',(1.4,-0.7,0.));-#7124 = VECTOR('',#7125,1.);-#7125 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7126 = PCURVE('',#5549,#7127);-#7127 = DEFINITIONAL_REPRESENTATION('',(#7128),#7132);-#7128 = LINE('',#7129,#7130);-#7129 = CARTESIAN_POINT('',(0.,0.));-#7130 = VECTOR('',#7131,1.);-#7131 = DIRECTION('',(0.,-1.));-#7132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7133 = PCURVE('',#5521,#7134);-#7134 = DEFINITIONAL_REPRESENTATION('',(#7135),#7139);-#7135 = LINE('',#7136,#7137);-#7136 = CARTESIAN_POINT('',(0.129469207717,-1.437396953874E-17));-#7137 = VECTOR('',#7138,1.);-#7138 = DIRECTION('',(0.,-1.));-#7139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7140 = ORIENTED_EDGE('',*,*,#5830,.T.);-#7141 = ORIENTED_EDGE('',*,*,#7093,.F.);-#7142 = ORIENTED_EDGE('',*,*,#5533,.F.);-#7143 = ADVANCED_FACE('',(#7144),#5521,.F.);-#7144 = FACE_BOUND('',#7145,.F.);-#7145 = EDGE_LOOP('',(#7146,#7167,#7168,#7169));-#7146 = ORIENTED_EDGE('',*,*,#7147,.T.);-#7147 = EDGE_CURVE('',#5477,#5784,#7148,.T.);-#7148 = SURFACE_CURVE('',#7149,(#7153,#7160),.PCURVE_S1.);-#7149 = LINE('',#7150,#7151);-#7150 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.));-#7151 = VECTOR('',#7152,1.);-#7152 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7153 = PCURVE('',#5521,#7154);-#7154 = DEFINITIONAL_REPRESENTATION('',(#7155),#7159);-#7155 = LINE('',#7156,#7157);-#7156 = CARTESIAN_POINT('',(0.,0.));-#7157 = VECTOR('',#7158,1.);-#7158 = DIRECTION('',(0.,-1.));-#7159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7160 = PCURVE('',#5493,#7161);-#7161 = DEFINITIONAL_REPRESENTATION('',(#7162),#7166);-#7162 = LINE('',#7163,#7164);-#7163 = CARTESIAN_POINT('',(4.886921905584,0.));-#7164 = VECTOR('',#7165,1.);-#7165 = DIRECTION('',(1.7763568394E-15,-1.));-#7166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7167 = ORIENTED_EDGE('',*,*,#5807,.T.);-#7168 = ORIENTED_EDGE('',*,*,#7120,.F.);-#7169 = ORIENTED_EDGE('',*,*,#5505,.F.);-#7170 = ADVANCED_FACE('',(#7171),#5493,.T.);-#7171 = FACE_BOUND('',#7172,.T.);-#7172 = EDGE_LOOP('',(#7173,#7174,#7175,#7176));-#7173 = ORIENTED_EDGE('',*,*,#5476,.T.);-#7174 = ORIENTED_EDGE('',*,*,#7147,.T.);-#7175 = ORIENTED_EDGE('',*,*,#5783,.F.);-#7176 = ORIENTED_EDGE('',*,*,#7177,.F.);-#7177 = EDGE_CURVE('',#5449,#5761,#7178,.T.);-#7178 = SURFACE_CURVE('',#7179,(#7183,#7190),.PCURVE_S1.);-#7179 = LINE('',#7180,#7181);-#7180 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583));-#7181 = VECTOR('',#7182,1.);-#7182 = DIRECTION('',(1.110223024625E-16,-1.,0.));-#7183 = PCURVE('',#5493,#7184);-#7184 = DEFINITIONAL_REPRESENTATION('',(#7185),#7189);-#7185 = LINE('',#7186,#7187);-#7186 = CARTESIAN_POINT('',(6.28318530718,0.));-#7187 = VECTOR('',#7188,1.);-#7188 = DIRECTION('',(0.,-1.));-#7189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7190 = PCURVE('',#5464,#7191);-#7191 = DEFINITIONAL_REPRESENTATION('',(#7192),#7196);-#7192 = LINE('',#7193,#7194);-#7193 = CARTESIAN_POINT('',(0.466977780811,-8.420828337873E-18));-#7194 = VECTOR('',#7195,1.);-#7195 = DIRECTION('',(1.187800808667E-29,-1.));-#7196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7197 = ADVANCED_FACE('',(#7198),#5464,.F.);-#7198 = FACE_BOUND('',#7199,.F.);-#7199 = EDGE_LOOP('',(#7200,#7201,#7202,#7203));-#7200 = ORIENTED_EDGE('',*,*,#5732,.T.);-#7201 = ORIENTED_EDGE('',*,*,#5760,.T.);-#7202 = ORIENTED_EDGE('',*,*,#7177,.F.);-#7203 = ORIENTED_EDGE('',*,*,#5448,.F.);-#7204 = ADVANCED_FACE('',(#7205),#6152,.F.);-#7205 = FACE_BOUND('',#7206,.T.);-#7206 = EDGE_LOOP('',(#7207));-#7207 = ORIENTED_EDGE('',*,*,#6131,.F.);-#7208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) -GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7212)) -GLOBAL_UNIT_ASSIGNED_CONTEXT((#7209,#7210,#7211)) REPRESENTATION_CONTEXT+#6242 = PCURVE('',#5081,#6243);+#6243 = DEFINITIONAL_REPRESENTATION('',(#6244),#6248);+#6244 = LINE('',#6245,#6246);+#6245 = CARTESIAN_POINT('',(0.16240659224,2.547960122519E-18));+#6246 = VECTOR('',#6247,1.);+#6247 = DIRECTION('',(2.52495221085E-29,-1.));+#6248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6249 = ADVANCED_FACE('',(#6250),#3128,.F.);+#6250 = FACE_BOUND('',#6251,.F.);+#6251 = EDGE_LOOP('',(#6252,#6253,#6254,#6255));+#6252 = ORIENTED_EDGE('',*,*,#3112,.T.);+#6253 = ORIENTED_EDGE('',*,*,#6148,.T.);+#6254 = ORIENTED_EDGE('',*,*,#6063,.F.);+#6255 = ORIENTED_EDGE('',*,*,#6201,.F.);+#6256 = ADVANCED_FACE('',(#6257),#3414,.T.);+#6257 = FACE_BOUND('',#6258,.T.);+#6258 = EDGE_LOOP('',(#6259,#6260,#6261,#6262));+#6259 = ORIENTED_EDGE('',*,*,#3397,.T.);+#6260 = ORIENTED_EDGE('',*,*,#5981,.T.);+#6261 = ORIENTED_EDGE('',*,*,#3674,.F.);+#6262 = ORIENTED_EDGE('',*,*,#6263,.F.);+#6263 = EDGE_CURVE('',#3370,#3652,#6264,.T.);+#6264 = SURFACE_CURVE('',#6265,(#6269,#6276),.PCURVE_S1.);+#6265 = LINE('',#6266,#6267);+#6266 = CARTESIAN_POINT('',(-1.096201938253,-1.125,0.393412044417));+#6267 = VECTOR('',#6268,1.);+#6268 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6269 = PCURVE('',#3414,#6270);+#6270 = DEFINITIONAL_REPRESENTATION('',(#6271),#6275);+#6271 = LINE('',#6272,#6273);+#6272 = CARTESIAN_POINT('',(6.28318530718,0.));+#6273 = VECTOR('',#6274,1.);+#6274 = DIRECTION('',(0.,-1.));+#6275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6276 = PCURVE('',#3385,#6277);+#6277 = DEFINITIONAL_REPRESENTATION('',(#6278),#6282);+#6278 = LINE('',#6279,#6280);+#6279 = CARTESIAN_POINT('',(0.16240659224,-2.626023853624E-19));+#6280 = VECTOR('',#6281,1.);+#6281 = DIRECTION('',(-2.656255567127E-30,-1.));+#6282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6283 = ADVANCED_FACE('',(#6284),#3385,.F.);+#6284 = FACE_BOUND('',#6285,.F.);+#6285 = EDGE_LOOP('',(#6286,#6307,#6308,#6309));+#6286 = ORIENTED_EDGE('',*,*,#6287,.T.);+#6287 = EDGE_CURVE('',#3337,#3624,#6288,.T.);+#6288 = SURFACE_CURVE('',#6289,(#6293,#6300),.PCURVE_S1.);+#6289 = LINE('',#6290,#6291);+#6290 = CARTESIAN_POINT('',(-1.11915192277,-1.125,0.232635182233));+#6291 = VECTOR('',#6292,1.);+#6292 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6293 = PCURVE('',#3385,#6294);+#6294 = DEFINITIONAL_REPRESENTATION('',(#6295),#6299);+#6295 = LINE('',#6296,#6297);+#6296 = CARTESIAN_POINT('',(0.,-0.));+#6297 = VECTOR('',#6298,1.);+#6298 = DIRECTION('',(-2.656255567127E-30,-1.));+#6299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6300 = PCURVE('',#3357,#6301);+#6301 = DEFINITIONAL_REPRESENTATION('',(#6302),#6306);+#6302 = LINE('',#6303,#6304);+#6303 = CARTESIAN_POINT('',(1.396263401592,0.));+#6304 = VECTOR('',#6305,1.);+#6305 = DIRECTION('',(0.,-1.));+#6306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6307 = ORIENTED_EDGE('',*,*,#3651,.T.);+#6308 = ORIENTED_EDGE('',*,*,#6263,.F.);+#6309 = ORIENTED_EDGE('',*,*,#3369,.F.);+#6310 = ADVANCED_FACE('',(#6311),#3357,.F.);+#6311 = FACE_BOUND('',#6312,.F.);+#6312 = EDGE_LOOP('',(#6313,#6334,#6335,#6336));+#6313 = ORIENTED_EDGE('',*,*,#6314,.T.);+#6314 = EDGE_CURVE('',#3309,#3601,#6315,.T.);+#6315 = SURFACE_CURVE('',#6316,(#6320,#6327),.PCURVE_S1.);+#6316 = LINE('',#6317,#6318);+#6317 = CARTESIAN_POINT('',(-1.217632698071,-1.125,0.15));+#6318 = VECTOR('',#6319,1.);+#6319 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6320 = PCURVE('',#3357,#6321);+#6321 = DEFINITIONAL_REPRESENTATION('',(#6322),#6326);+#6322 = LINE('',#6323,#6324);+#6323 = CARTESIAN_POINT('',(0.,0.));+#6324 = VECTOR('',#6325,1.);+#6325 = DIRECTION('',(0.,-1.));+#6326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6327 = PCURVE('',#3324,#6328);+#6328 = DEFINITIONAL_REPRESENTATION('',(#6329),#6333);+#6329 = LINE('',#6330,#6331);+#6330 = CARTESIAN_POINT('',(0.182367301929,-2.086715503615E-18));+#6331 = VECTOR('',#6332,1.);+#6332 = DIRECTION('',(0.,-1.));+#6333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6334 = ORIENTED_EDGE('',*,*,#3623,.T.);+#6335 = ORIENTED_EDGE('',*,*,#6287,.F.);+#6336 = ORIENTED_EDGE('',*,*,#3336,.F.);+#6337 = ADVANCED_FACE('',(#6338),#3324,.F.);+#6338 = FACE_BOUND('',#6339,.F.);+#6339 = EDGE_LOOP('',(#6340,#6361,#6362,#6363));+#6340 = ORIENTED_EDGE('',*,*,#6341,.T.);+#6341 = EDGE_CURVE('',#3281,#3578,#6342,.T.);+#6342 = SURFACE_CURVE('',#6343,(#6347,#6354),.PCURVE_S1.);+#6343 = LINE('',#6344,#6345);+#6344 = CARTESIAN_POINT('',(-1.4,-1.125,0.15));+#6345 = VECTOR('',#6346,1.);+#6346 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6347 = PCURVE('',#3324,#6348);+#6348 = DEFINITIONAL_REPRESENTATION('',(#6349),#6353);+#6349 = LINE('',#6350,#6351);+#6350 = CARTESIAN_POINT('',(0.,-0.));+#6351 = VECTOR('',#6352,1.);+#6352 = DIRECTION('',(0.,-1.));+#6353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6354 = PCURVE('',#3296,#6355);+#6355 = DEFINITIONAL_REPRESENTATION('',(#6356),#6360);+#6356 = LINE('',#6357,#6358);+#6357 = CARTESIAN_POINT('',(0.15,0.));+#6358 = VECTOR('',#6359,1.);+#6359 = DIRECTION('',(0.,-1.));+#6360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6361 = ORIENTED_EDGE('',*,*,#3600,.T.);+#6362 = ORIENTED_EDGE('',*,*,#6314,.F.);+#6363 = ORIENTED_EDGE('',*,*,#3308,.F.);+#6364 = ADVANCED_FACE('',(#6365),#3296,.F.);+#6365 = FACE_BOUND('',#6366,.F.);+#6366 = EDGE_LOOP('',(#6367,#6388,#6389,#6390));+#6367 = ORIENTED_EDGE('',*,*,#6368,.T.);+#6368 = EDGE_CURVE('',#3253,#3555,#6369,.T.);+#6369 = SURFACE_CURVE('',#6370,(#6374,#6381),.PCURVE_S1.);+#6370 = LINE('',#6371,#6372);+#6371 = CARTESIAN_POINT('',(-1.4,-1.125,5.551115123126E-17));+#6372 = VECTOR('',#6373,1.);+#6373 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6374 = PCURVE('',#3296,#6375);+#6375 = DEFINITIONAL_REPRESENTATION('',(#6376),#6380);+#6376 = LINE('',#6377,#6378);+#6377 = CARTESIAN_POINT('',(0.,0.));+#6378 = VECTOR('',#6379,1.);+#6379 = DIRECTION('',(0.,-1.));+#6380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6381 = PCURVE('',#3268,#6382);+#6382 = DEFINITIONAL_REPRESENTATION('',(#6383),#6387);+#6383 = LINE('',#6384,#6385);+#6384 = CARTESIAN_POINT('',(0.182367301929,2.086715503615E-18));+#6385 = VECTOR('',#6386,1.);+#6386 = DIRECTION('',(0.,-1.));+#6387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6388 = ORIENTED_EDGE('',*,*,#3577,.T.);+#6389 = ORIENTED_EDGE('',*,*,#6341,.F.);+#6390 = ORIENTED_EDGE('',*,*,#3280,.F.);+#6391 = ADVANCED_FACE('',(#6392),#3268,.F.);+#6392 = FACE_BOUND('',#6393,.F.);+#6393 = EDGE_LOOP('',(#6394,#6415,#6416,#6417));+#6394 = ORIENTED_EDGE('',*,*,#6395,.T.);+#6395 = EDGE_CURVE('',#3224,#3531,#6396,.T.);+#6396 = SURFACE_CURVE('',#6397,(#6401,#6408),.PCURVE_S1.);+#6397 = LINE('',#6398,#6399);+#6398 = CARTESIAN_POINT('',(-1.217632698071,-1.125,5.551115123126E-17));+#6399 = VECTOR('',#6400,1.);+#6400 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6401 = PCURVE('',#3268,#6402);+#6402 = DEFINITIONAL_REPRESENTATION('',(#6403),#6407);+#6403 = LINE('',#6404,#6405);+#6404 = CARTESIAN_POINT('',(0.,0.));+#6405 = VECTOR('',#6406,1.);+#6406 = DIRECTION('',(0.,-1.));+#6407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6408 = PCURVE('',#3240,#6409);+#6409 = DEFINITIONAL_REPRESENTATION('',(#6410),#6414);+#6410 = LINE('',#6411,#6412);+#6411 = CARTESIAN_POINT('',(4.886921905584,0.));+#6412 = VECTOR('',#6413,1.);+#6413 = DIRECTION('',(0.,-1.));+#6414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6415 = ORIENTED_EDGE('',*,*,#3554,.T.);+#6416 = ORIENTED_EDGE('',*,*,#6368,.F.);+#6417 = ORIENTED_EDGE('',*,*,#3252,.F.);+#6418 = ADVANCED_FACE('',(#6419),#3240,.T.);+#6419 = FACE_BOUND('',#6420,.T.);+#6420 = EDGE_LOOP('',(#6421,#6422,#6423,#6424));+#6421 = ORIENTED_EDGE('',*,*,#3223,.T.);+#6422 = ORIENTED_EDGE('',*,*,#6395,.T.);+#6423 = ORIENTED_EDGE('',*,*,#3530,.F.);+#6424 = ORIENTED_EDGE('',*,*,#6425,.F.);+#6425 = EDGE_CURVE('',#3196,#3508,#6426,.T.);+#6426 = SURFACE_CURVE('',#6427,(#6431,#6438),.PCURVE_S1.);+#6427 = LINE('',#6428,#6429);+#6428 = CARTESIAN_POINT('',(-0.971430759818,-1.125,0.206587955583));+#6429 = VECTOR('',#6430,1.);+#6430 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6431 = PCURVE('',#3240,#6432);+#6432 = DEFINITIONAL_REPRESENTATION('',(#6433),#6437);+#6433 = LINE('',#6434,#6435);+#6434 = CARTESIAN_POINT('',(6.28318530718,0.));+#6435 = VECTOR('',#6436,1.);+#6436 = DIRECTION('',(0.,-1.));+#6437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6438 = PCURVE('',#3211,#6439);+#6439 = DEFINITIONAL_REPRESENTATION('',(#6440),#6444);+#6440 = LINE('',#6441,#6442);+#6441 = CARTESIAN_POINT('',(0.16240659224,2.626023853624E-19));+#6442 = VECTOR('',#6443,1.);+#6443 = DIRECTION('',(2.656255567127E-30,-1.));+#6444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6445 = ADVANCED_FACE('',(#6446),#3211,.F.);+#6446 = FACE_BOUND('',#6447,.F.);+#6447 = EDGE_LOOP('',(#6448,#6449,#6450,#6451));+#6448 = ORIENTED_EDGE('',*,*,#3479,.T.);+#6449 = ORIENTED_EDGE('',*,*,#3507,.T.);+#6450 = ORIENTED_EDGE('',*,*,#6425,.F.);+#6451 = ORIENTED_EDGE('',*,*,#3195,.F.);+#6452 = ADVANCED_FACE('',(#6453),#4018,.T.);+#6453 = FACE_BOUND('',#6454,.T.);+#6454 = EDGE_LOOP('',(#6455,#6456,#6457,#6458));+#6455 = ORIENTED_EDGE('',*,*,#4001,.T.);+#6456 = ORIENTED_EDGE('',*,*,#6010,.T.);+#6457 = ORIENTED_EDGE('',*,*,#4278,.F.);+#6458 = ORIENTED_EDGE('',*,*,#6459,.F.);+#6459 = EDGE_CURVE('',#3974,#4256,#6460,.T.);+#6460 = SURFACE_CURVE('',#6461,(#6465,#6472),.PCURVE_S1.);+#6461 = LINE('',#6462,#6463);+#6462 = CARTESIAN_POINT('',(-1.096201938253,-0.175,0.393412044417));+#6463 = VECTOR('',#6464,1.);+#6464 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6465 = PCURVE('',#4018,#6466);+#6466 = DEFINITIONAL_REPRESENTATION('',(#6467),#6471);+#6467 = LINE('',#6468,#6469);+#6468 = CARTESIAN_POINT('',(6.28318530718,0.));+#6469 = VECTOR('',#6470,1.);+#6470 = DIRECTION('',(0.,-1.));+#6471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6472 = PCURVE('',#3989,#6473);+#6473 = DEFINITIONAL_REPRESENTATION('',(#6474),#6478);+#6474 = LINE('',#6475,#6476);+#6475 = CARTESIAN_POINT('',(0.16240659224,-2.626023853624E-19));+#6476 = VECTOR('',#6477,1.);+#6477 = DIRECTION('',(-2.656255567127E-30,-1.));+#6478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6479 = ADVANCED_FACE('',(#6480),#3989,.F.);+#6480 = FACE_BOUND('',#6481,.F.);+#6481 = EDGE_LOOP('',(#6482,#6503,#6504,#6505));+#6482 = ORIENTED_EDGE('',*,*,#6483,.T.);+#6483 = EDGE_CURVE('',#3941,#4228,#6484,.T.);+#6484 = SURFACE_CURVE('',#6485,(#6489,#6496),.PCURVE_S1.);+#6485 = LINE('',#6486,#6487);+#6486 = CARTESIAN_POINT('',(-1.11915192277,-0.175,0.232635182233));+#6487 = VECTOR('',#6488,1.);+#6488 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6489 = PCURVE('',#3989,#6490);+#6490 = DEFINITIONAL_REPRESENTATION('',(#6491),#6495);+#6491 = LINE('',#6492,#6493);+#6492 = CARTESIAN_POINT('',(0.,-0.));+#6493 = VECTOR('',#6494,1.);+#6494 = DIRECTION('',(-2.656255567127E-30,-1.));+#6495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6496 = PCURVE('',#3961,#6497);+#6497 = DEFINITIONAL_REPRESENTATION('',(#6498),#6502);+#6498 = LINE('',#6499,#6500);+#6499 = CARTESIAN_POINT('',(1.396263401592,-2.775557561563E-17));+#6500 = VECTOR('',#6501,1.);+#6501 = DIRECTION('',(0.,-1.));+#6502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6503 = ORIENTED_EDGE('',*,*,#4255,.T.);+#6504 = ORIENTED_EDGE('',*,*,#6459,.F.);+#6505 = ORIENTED_EDGE('',*,*,#3973,.F.);+#6506 = ADVANCED_FACE('',(#6507),#3961,.F.);+#6507 = FACE_BOUND('',#6508,.F.);+#6508 = EDGE_LOOP('',(#6509,#6530,#6531,#6532));+#6509 = ORIENTED_EDGE('',*,*,#6510,.T.);+#6510 = EDGE_CURVE('',#3913,#4205,#6511,.T.);+#6511 = SURFACE_CURVE('',#6512,(#6516,#6523),.PCURVE_S1.);+#6512 = LINE('',#6513,#6514);+#6513 = CARTESIAN_POINT('',(-1.217632698071,-0.175,0.15));+#6514 = VECTOR('',#6515,1.);+#6515 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6516 = PCURVE('',#3961,#6517);+#6517 = DEFINITIONAL_REPRESENTATION('',(#6518),#6522);+#6518 = LINE('',#6519,#6520);+#6519 = CARTESIAN_POINT('',(0.,0.));+#6520 = VECTOR('',#6521,1.);+#6521 = DIRECTION('',(0.,-1.));+#6522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6523 = PCURVE('',#3928,#6524);+#6524 = DEFINITIONAL_REPRESENTATION('',(#6525),#6529);+#6525 = LINE('',#6526,#6527);+#6526 = CARTESIAN_POINT('',(0.182367301929,-2.086715503615E-18));+#6527 = VECTOR('',#6528,1.);+#6528 = DIRECTION('',(0.,-1.));+#6529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6530 = ORIENTED_EDGE('',*,*,#4227,.T.);+#6531 = ORIENTED_EDGE('',*,*,#6483,.F.);+#6532 = ORIENTED_EDGE('',*,*,#3940,.F.);+#6533 = ADVANCED_FACE('',(#6534),#3928,.F.);+#6534 = FACE_BOUND('',#6535,.F.);+#6535 = EDGE_LOOP('',(#6536,#6557,#6558,#6559));+#6536 = ORIENTED_EDGE('',*,*,#6537,.T.);+#6537 = EDGE_CURVE('',#3885,#4182,#6538,.T.);+#6538 = SURFACE_CURVE('',#6539,(#6543,#6550),.PCURVE_S1.);+#6539 = LINE('',#6540,#6541);+#6540 = CARTESIAN_POINT('',(-1.4,-0.175,0.15));+#6541 = VECTOR('',#6542,1.);+#6542 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6543 = PCURVE('',#3928,#6544);+#6544 = DEFINITIONAL_REPRESENTATION('',(#6545),#6549);+#6545 = LINE('',#6546,#6547);+#6546 = CARTESIAN_POINT('',(0.,-0.));+#6547 = VECTOR('',#6548,1.);+#6548 = DIRECTION('',(0.,-1.));+#6549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6550 = PCURVE('',#3900,#6551);+#6551 = DEFINITIONAL_REPRESENTATION('',(#6552),#6556);+#6552 = LINE('',#6553,#6554);+#6553 = CARTESIAN_POINT('',(0.15,0.));+#6554 = VECTOR('',#6555,1.);+#6555 = DIRECTION('',(0.,-1.));+#6556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6557 = ORIENTED_EDGE('',*,*,#4204,.T.);+#6558 = ORIENTED_EDGE('',*,*,#6510,.F.);+#6559 = ORIENTED_EDGE('',*,*,#3912,.F.);+#6560 = ADVANCED_FACE('',(#6561),#3900,.F.);+#6561 = FACE_BOUND('',#6562,.F.);+#6562 = EDGE_LOOP('',(#6563,#6584,#6585,#6586));+#6563 = ORIENTED_EDGE('',*,*,#6564,.T.);+#6564 = EDGE_CURVE('',#3857,#4159,#6565,.T.);+#6565 = SURFACE_CURVE('',#6566,(#6570,#6577),.PCURVE_S1.);+#6566 = LINE('',#6567,#6568);+#6567 = CARTESIAN_POINT('',(-1.4,-0.175,5.551115123126E-17));+#6568 = VECTOR('',#6569,1.);+#6569 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6570 = PCURVE('',#3900,#6571);+#6571 = DEFINITIONAL_REPRESENTATION('',(#6572),#6576);+#6572 = LINE('',#6573,#6574);+#6573 = CARTESIAN_POINT('',(0.,0.));+#6574 = VECTOR('',#6575,1.);+#6575 = DIRECTION('',(0.,-1.));+#6576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6577 = PCURVE('',#3872,#6578);+#6578 = DEFINITIONAL_REPRESENTATION('',(#6579),#6583);+#6579 = LINE('',#6580,#6581);+#6580 = CARTESIAN_POINT('',(0.182367301929,2.086715503615E-18));+#6581 = VECTOR('',#6582,1.);+#6582 = DIRECTION('',(0.,-1.));+#6583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6584 = ORIENTED_EDGE('',*,*,#4181,.T.);+#6585 = ORIENTED_EDGE('',*,*,#6537,.F.);+#6586 = ORIENTED_EDGE('',*,*,#3884,.F.);+#6587 = ADVANCED_FACE('',(#6588),#3872,.F.);+#6588 = FACE_BOUND('',#6589,.F.);+#6589 = EDGE_LOOP('',(#6590,#6611,#6612,#6613));+#6590 = ORIENTED_EDGE('',*,*,#6591,.T.);+#6591 = EDGE_CURVE('',#3828,#4135,#6592,.T.);+#6592 = SURFACE_CURVE('',#6593,(#6597,#6604),.PCURVE_S1.);+#6593 = LINE('',#6594,#6595);+#6594 = CARTESIAN_POINT('',(-1.217632698071,-0.175,5.551115123126E-17));+#6595 = VECTOR('',#6596,1.);+#6596 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6597 = PCURVE('',#3872,#6598);+#6598 = DEFINITIONAL_REPRESENTATION('',(#6599),#6603);+#6599 = LINE('',#6600,#6601);+#6600 = CARTESIAN_POINT('',(0.,0.));+#6601 = VECTOR('',#6602,1.);+#6602 = DIRECTION('',(0.,-1.));+#6603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6604 = PCURVE('',#3844,#6605);+#6605 = DEFINITIONAL_REPRESENTATION('',(#6606),#6610);+#6606 = LINE('',#6607,#6608);+#6607 = CARTESIAN_POINT('',(4.886921905584,0.));+#6608 = VECTOR('',#6609,1.);+#6609 = DIRECTION('',(0.,-1.));+#6610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6611 = ORIENTED_EDGE('',*,*,#4158,.T.);+#6612 = ORIENTED_EDGE('',*,*,#6564,.F.);+#6613 = ORIENTED_EDGE('',*,*,#3856,.F.);+#6614 = ADVANCED_FACE('',(#6615),#3844,.T.);+#6615 = FACE_BOUND('',#6616,.T.);+#6616 = EDGE_LOOP('',(#6617,#6618,#6619,#6620));+#6617 = ORIENTED_EDGE('',*,*,#3827,.T.);+#6618 = ORIENTED_EDGE('',*,*,#6591,.T.);+#6619 = ORIENTED_EDGE('',*,*,#4134,.F.);+#6620 = ORIENTED_EDGE('',*,*,#6621,.F.);+#6621 = EDGE_CURVE('',#3800,#4112,#6622,.T.);+#6622 = SURFACE_CURVE('',#6623,(#6627,#6634),.PCURVE_S1.);+#6623 = LINE('',#6624,#6625);+#6624 = CARTESIAN_POINT('',(-0.971430759818,-0.175,0.206587955583));+#6625 = VECTOR('',#6626,1.);+#6626 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6627 = PCURVE('',#3844,#6628);+#6628 = DEFINITIONAL_REPRESENTATION('',(#6629),#6633);+#6629 = LINE('',#6630,#6631);+#6630 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17));+#6631 = VECTOR('',#6632,1.);+#6632 = DIRECTION('',(0.,-1.));+#6633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6634 = PCURVE('',#3815,#6635);+#6635 = DEFINITIONAL_REPRESENTATION('',(#6636),#6640);+#6636 = LINE('',#6637,#6638);+#6637 = CARTESIAN_POINT('',(0.16240659224,2.626023853624E-19));+#6638 = VECTOR('',#6639,1.);+#6639 = DIRECTION('',(2.656255567127E-30,-1.));+#6640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6641 = ADVANCED_FACE('',(#6642),#3815,.F.);+#6642 = FACE_BOUND('',#6643,.F.);+#6643 = EDGE_LOOP('',(#6644,#6645,#6646,#6647));+#6644 = ORIENTED_EDGE('',*,*,#4083,.T.);+#6645 = ORIENTED_EDGE('',*,*,#4111,.T.);+#6646 = ORIENTED_EDGE('',*,*,#6621,.F.);+#6647 = ORIENTED_EDGE('',*,*,#3799,.F.);+#6648 = ADVANCED_FACE('',(#6649),#4573,.F.);+#6649 = FACE_BOUND('',#6650,.F.);+#6650 = EDGE_LOOP('',(#6651,#6672,#6673,#6674));+#6651 = ORIENTED_EDGE('',*,*,#6652,.T.);+#6652 = EDGE_CURVE('',#4525,#4785,#6653,.T.);+#6653 = SURFACE_CURVE('',#6654,(#6658,#6665),.PCURVE_S1.);+#6654 = LINE('',#6655,#6656);+#6655 = CARTESIAN_POINT('',(-1.11915192277,0.775,0.232635182233));+#6656 = VECTOR('',#6657,1.);+#6657 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6658 = PCURVE('',#4573,#6659);+#6659 = DEFINITIONAL_REPRESENTATION('',(#6660),#6664);+#6660 = LINE('',#6661,#6662);+#6661 = CARTESIAN_POINT('',(0.,-0.));+#6662 = VECTOR('',#6663,1.);+#6663 = DIRECTION('',(-2.656255567127E-30,-1.));+#6664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6665 = PCURVE('',#4545,#6666);+#6666 = DEFINITIONAL_REPRESENTATION('',(#6667),#6671);+#6667 = LINE('',#6668,#6669);+#6668 = CARTESIAN_POINT('',(1.396263401592,0.));+#6669 = VECTOR('',#6670,1.);+#6670 = DIRECTION('',(0.,-1.));+#6671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6672 = ORIENTED_EDGE('',*,*,#4812,.T.);+#6673 = ORIENTED_EDGE('',*,*,#5956,.F.);+#6674 = ORIENTED_EDGE('',*,*,#4557,.F.);+#6675 = ADVANCED_FACE('',(#6676),#4545,.F.);+#6676 = FACE_BOUND('',#6677,.F.);+#6677 = EDGE_LOOP('',(#6678,#6699,#6700,#6701));+#6678 = ORIENTED_EDGE('',*,*,#6679,.T.);+#6679 = EDGE_CURVE('',#4497,#4762,#6680,.T.);+#6680 = SURFACE_CURVE('',#6681,(#6685,#6692),.PCURVE_S1.);+#6681 = LINE('',#6682,#6683);+#6682 = CARTESIAN_POINT('',(-1.217632698071,0.775,0.15));+#6683 = VECTOR('',#6684,1.);+#6684 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6685 = PCURVE('',#4545,#6686);+#6686 = DEFINITIONAL_REPRESENTATION('',(#6687),#6691);+#6687 = LINE('',#6688,#6689);+#6688 = CARTESIAN_POINT('',(0.,0.));+#6689 = VECTOR('',#6690,1.);+#6690 = DIRECTION('',(0.,-1.));+#6691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6692 = PCURVE('',#4512,#6693);+#6693 = DEFINITIONAL_REPRESENTATION('',(#6694),#6698);+#6694 = LINE('',#6695,#6696);+#6695 = CARTESIAN_POINT('',(0.182367301929,-2.086715503615E-18));+#6696 = VECTOR('',#6697,1.);+#6697 = DIRECTION('',(0.,-1.));+#6698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6699 = ORIENTED_EDGE('',*,*,#4784,.T.);+#6700 = ORIENTED_EDGE('',*,*,#6652,.F.);+#6701 = ORIENTED_EDGE('',*,*,#4524,.F.);+#6702 = ADVANCED_FACE('',(#6703),#4512,.F.);+#6703 = FACE_BOUND('',#6704,.F.);+#6704 = EDGE_LOOP('',(#6705,#6726,#6727,#6728));+#6705 = ORIENTED_EDGE('',*,*,#6706,.T.);+#6706 = EDGE_CURVE('',#4469,#4739,#6707,.T.);+#6707 = SURFACE_CURVE('',#6708,(#6712,#6719),.PCURVE_S1.);+#6708 = LINE('',#6709,#6710);+#6709 = CARTESIAN_POINT('',(-1.4,0.775,0.15));+#6710 = VECTOR('',#6711,1.);+#6711 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6712 = PCURVE('',#4512,#6713);+#6713 = DEFINITIONAL_REPRESENTATION('',(#6714),#6718);+#6714 = LINE('',#6715,#6716);+#6715 = CARTESIAN_POINT('',(0.,-0.));+#6716 = VECTOR('',#6717,1.);+#6717 = DIRECTION('',(0.,-1.));+#6718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6719 = PCURVE('',#4484,#6720);+#6720 = DEFINITIONAL_REPRESENTATION('',(#6721),#6725);+#6721 = LINE('',#6722,#6723);+#6722 = CARTESIAN_POINT('',(0.15,0.));+#6723 = VECTOR('',#6724,1.);+#6724 = DIRECTION('',(0.,-1.));+#6725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6726 = ORIENTED_EDGE('',*,*,#4761,.T.);+#6727 = ORIENTED_EDGE('',*,*,#6679,.F.);+#6728 = ORIENTED_EDGE('',*,*,#4496,.F.);+#6729 = ADVANCED_FACE('',(#6730),#4484,.F.);+#6730 = FACE_BOUND('',#6731,.F.);+#6731 = EDGE_LOOP('',(#6732,#6753,#6754,#6755));+#6732 = ORIENTED_EDGE('',*,*,#6733,.T.);+#6733 = EDGE_CURVE('',#4441,#4716,#6734,.T.);+#6734 = SURFACE_CURVE('',#6735,(#6739,#6746),.PCURVE_S1.);+#6735 = LINE('',#6736,#6737);+#6736 = CARTESIAN_POINT('',(-1.4,0.775,5.551115123126E-17));+#6737 = VECTOR('',#6738,1.);+#6738 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6739 = PCURVE('',#4484,#6740);+#6740 = DEFINITIONAL_REPRESENTATION('',(#6741),#6745);+#6741 = LINE('',#6742,#6743);+#6742 = CARTESIAN_POINT('',(0.,0.));+#6743 = VECTOR('',#6744,1.);+#6744 = DIRECTION('',(0.,-1.));+#6745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6746 = PCURVE('',#4456,#6747);+#6747 = DEFINITIONAL_REPRESENTATION('',(#6748),#6752);+#6748 = LINE('',#6749,#6750);+#6749 = CARTESIAN_POINT('',(0.182367301929,2.086715503615E-18));+#6750 = VECTOR('',#6751,1.);+#6751 = DIRECTION('',(0.,-1.));+#6752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6753 = ORIENTED_EDGE('',*,*,#4738,.T.);+#6754 = ORIENTED_EDGE('',*,*,#6706,.F.);+#6755 = ORIENTED_EDGE('',*,*,#4468,.F.);+#6756 = ADVANCED_FACE('',(#6757),#4456,.F.);+#6757 = FACE_BOUND('',#6758,.F.);+#6758 = EDGE_LOOP('',(#6759,#6780,#6781,#6782));+#6759 = ORIENTED_EDGE('',*,*,#6760,.T.);+#6760 = EDGE_CURVE('',#4412,#4692,#6761,.T.);+#6761 = SURFACE_CURVE('',#6762,(#6766,#6773),.PCURVE_S1.);+#6762 = LINE('',#6763,#6764);+#6763 = CARTESIAN_POINT('',(-1.217632698071,0.775,5.551115123126E-17));+#6764 = VECTOR('',#6765,1.);+#6765 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6766 = PCURVE('',#4456,#6767);+#6767 = DEFINITIONAL_REPRESENTATION('',(#6768),#6772);+#6768 = LINE('',#6769,#6770);+#6769 = CARTESIAN_POINT('',(0.,0.));+#6770 = VECTOR('',#6771,1.);+#6771 = DIRECTION('',(0.,-1.));+#6772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6773 = PCURVE('',#4428,#6774);+#6774 = DEFINITIONAL_REPRESENTATION('',(#6775),#6779);+#6775 = LINE('',#6776,#6777);+#6776 = CARTESIAN_POINT('',(4.886921905584,0.));+#6777 = VECTOR('',#6778,1.);+#6778 = DIRECTION('',(0.,-1.));+#6779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6780 = ORIENTED_EDGE('',*,*,#4715,.T.);+#6781 = ORIENTED_EDGE('',*,*,#6733,.F.);+#6782 = ORIENTED_EDGE('',*,*,#4440,.F.);+#6783 = ADVANCED_FACE('',(#6784),#4428,.T.);+#6784 = FACE_BOUND('',#6785,.T.);+#6785 = EDGE_LOOP('',(#6786,#6787,#6788,#6789));+#6786 = ORIENTED_EDGE('',*,*,#4411,.T.);+#6787 = ORIENTED_EDGE('',*,*,#6760,.T.);+#6788 = ORIENTED_EDGE('',*,*,#4691,.F.);+#6789 = ORIENTED_EDGE('',*,*,#6790,.F.);+#6790 = EDGE_CURVE('',#4384,#4669,#6791,.T.);+#6791 = SURFACE_CURVE('',#6792,(#6796,#6803),.PCURVE_S1.);+#6792 = LINE('',#6793,#6794);+#6793 = CARTESIAN_POINT('',(-0.971430759818,0.775,0.206587955583));+#6794 = VECTOR('',#6795,1.);+#6795 = DIRECTION('',(1.144237745222E-17,1.,0.));+#6796 = PCURVE('',#4428,#6797);+#6797 = DEFINITIONAL_REPRESENTATION('',(#6798),#6802);+#6798 = LINE('',#6799,#6800);+#6799 = CARTESIAN_POINT('',(6.28318530718,0.));+#6800 = VECTOR('',#6801,1.);+#6801 = DIRECTION('',(0.,-1.));+#6802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6803 = PCURVE('',#4399,#6804);+#6804 = DEFINITIONAL_REPRESENTATION('',(#6805),#6809);+#6805 = LINE('',#6806,#6807);+#6806 = CARTESIAN_POINT('',(0.16240659224,2.626023853624E-19));+#6807 = VECTOR('',#6808,1.);+#6808 = DIRECTION('',(2.656255567127E-30,-1.));+#6809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6810 = ADVANCED_FACE('',(#6811),#4399,.F.);+#6811 = FACE_BOUND('',#6812,.F.);+#6812 = EDGE_LOOP('',(#6813,#6814,#6815,#6816));+#6813 = ORIENTED_EDGE('',*,*,#4640,.T.);+#6814 = ORIENTED_EDGE('',*,*,#4668,.T.);+#6815 = ORIENTED_EDGE('',*,*,#6790,.F.);+#6816 = ORIENTED_EDGE('',*,*,#4383,.F.);+#6817 = ADVANCED_FACE('',(#6818),#5081,.F.);+#6818 = FACE_BOUND('',#6819,.F.);+#6819 = EDGE_LOOP('',(#6820,#6841,#6842,#6843));+#6820 = ORIENTED_EDGE('',*,*,#6821,.T.);+#6821 = EDGE_CURVE('',#5033,#5293,#6822,.T.);+#6822 = SURFACE_CURVE('',#6823,(#6827,#6834),.PCURVE_S1.);+#6823 = LINE('',#6824,#6825);+#6824 = CARTESIAN_POINT('',(1.11915192277,1.125,0.232635182233));+#6825 = VECTOR('',#6826,1.);+#6826 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6827 = PCURVE('',#5081,#6828);+#6828 = DEFINITIONAL_REPRESENTATION('',(#6829),#6833);+#6829 = LINE('',#6830,#6831);+#6830 = CARTESIAN_POINT('',(0.,0.));+#6831 = VECTOR('',#6832,1.);+#6832 = DIRECTION('',(2.52495221085E-29,-1.));+#6833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6834 = PCURVE('',#5053,#6835);+#6835 = DEFINITIONAL_REPRESENTATION('',(#6836),#6840);+#6836 = LINE('',#6837,#6838);+#6837 = CARTESIAN_POINT('',(1.396263401592,0.));+#6838 = VECTOR('',#6839,1.);+#6839 = DIRECTION('',(6.344131569287E-16,-1.));+#6840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6841 = ORIENTED_EDGE('',*,*,#5320,.T.);+#6842 = ORIENTED_EDGE('',*,*,#6229,.F.);+#6843 = ORIENTED_EDGE('',*,*,#5065,.F.);+#6844 = ADVANCED_FACE('',(#6845),#5053,.F.);+#6845 = FACE_BOUND('',#6846,.F.);+#6846 = EDGE_LOOP('',(#6847,#6868,#6869,#6870));+#6847 = ORIENTED_EDGE('',*,*,#6848,.T.);+#6848 = EDGE_CURVE('',#5005,#5270,#6849,.T.);+#6849 = SURFACE_CURVE('',#6850,(#6854,#6861),.PCURVE_S1.);+#6850 = LINE('',#6851,#6852);+#6851 = CARTESIAN_POINT('',(1.217632698071,1.125,0.15));+#6852 = VECTOR('',#6853,1.);+#6853 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6854 = PCURVE('',#5053,#6855);+#6855 = DEFINITIONAL_REPRESENTATION('',(#6856),#6860);+#6856 = LINE('',#6857,#6858);+#6857 = CARTESIAN_POINT('',(0.,0.));+#6858 = VECTOR('',#6859,1.);+#6859 = DIRECTION('',(0.,-1.));+#6860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6861 = PCURVE('',#5020,#6862);+#6862 = DEFINITIONAL_REPRESENTATION('',(#6863),#6867);+#6863 = LINE('',#6864,#6865);+#6864 = CARTESIAN_POINT('',(0.182367301929,2.024683775403E-17));+#6865 = VECTOR('',#6866,1.);+#6866 = DIRECTION('',(0.,-1.));+#6867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6868 = ORIENTED_EDGE('',*,*,#5292,.T.);+#6869 = ORIENTED_EDGE('',*,*,#6821,.F.);+#6870 = ORIENTED_EDGE('',*,*,#5032,.F.);+#6871 = ADVANCED_FACE('',(#6872),#5020,.F.);+#6872 = FACE_BOUND('',#6873,.F.);+#6873 = EDGE_LOOP('',(#6874,#6895,#6896,#6897));+#6874 = ORIENTED_EDGE('',*,*,#6875,.T.);+#6875 = EDGE_CURVE('',#4977,#5247,#6876,.T.);+#6876 = SURFACE_CURVE('',#6877,(#6881,#6888),.PCURVE_S1.);+#6877 = LINE('',#6878,#6879);+#6878 = CARTESIAN_POINT('',(1.4,1.125,0.15));+#6879 = VECTOR('',#6880,1.);+#6880 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6881 = PCURVE('',#5020,#6882);+#6882 = DEFINITIONAL_REPRESENTATION('',(#6883),#6887);+#6883 = LINE('',#6884,#6885);+#6884 = CARTESIAN_POINT('',(-0.,0.));+#6885 = VECTOR('',#6886,1.);+#6886 = DIRECTION('',(0.,-1.));+#6887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6888 = PCURVE('',#4992,#6889);+#6889 = DEFINITIONAL_REPRESENTATION('',(#6890),#6894);+#6890 = LINE('',#6891,#6892);+#6891 = CARTESIAN_POINT('',(0.15,0.));+#6892 = VECTOR('',#6893,1.);+#6893 = DIRECTION('',(0.,-1.));+#6894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6895 = ORIENTED_EDGE('',*,*,#5269,.T.);+#6896 = ORIENTED_EDGE('',*,*,#6848,.F.);+#6897 = ORIENTED_EDGE('',*,*,#5004,.F.);+#6898 = ADVANCED_FACE('',(#6899),#4992,.F.);+#6899 = FACE_BOUND('',#6900,.F.);+#6900 = EDGE_LOOP('',(#6901,#6922,#6923,#6924));+#6901 = ORIENTED_EDGE('',*,*,#6902,.T.);+#6902 = EDGE_CURVE('',#4949,#5224,#6903,.T.);+#6903 = SURFACE_CURVE('',#6904,(#6908,#6915),.PCURVE_S1.);+#6904 = LINE('',#6905,#6906);+#6905 = CARTESIAN_POINT('',(1.4,1.125,5.551115123126E-17));+#6906 = VECTOR('',#6907,1.);+#6907 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6908 = PCURVE('',#4992,#6909);+#6909 = DEFINITIONAL_REPRESENTATION('',(#6910),#6914);+#6910 = LINE('',#6911,#6912);+#6911 = CARTESIAN_POINT('',(0.,0.));+#6912 = VECTOR('',#6913,1.);+#6913 = DIRECTION('',(0.,-1.));+#6914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6915 = PCURVE('',#4964,#6916);+#6916 = DEFINITIONAL_REPRESENTATION('',(#6917),#6921);+#6917 = LINE('',#6918,#6919);+#6918 = CARTESIAN_POINT('',(0.182367301929,-2.024683775403E-17));+#6919 = VECTOR('',#6920,1.);+#6920 = DIRECTION('',(0.,-1.));+#6921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6922 = ORIENTED_EDGE('',*,*,#5246,.T.);+#6923 = ORIENTED_EDGE('',*,*,#6875,.F.);+#6924 = ORIENTED_EDGE('',*,*,#4976,.F.);+#6925 = ADVANCED_FACE('',(#6926),#4964,.F.);+#6926 = FACE_BOUND('',#6927,.F.);+#6927 = EDGE_LOOP('',(#6928,#6949,#6950,#6951));+#6928 = ORIENTED_EDGE('',*,*,#6929,.T.);+#6929 = EDGE_CURVE('',#4920,#5200,#6930,.T.);+#6930 = SURFACE_CURVE('',#6931,(#6935,#6942),.PCURVE_S1.);+#6931 = LINE('',#6932,#6933);+#6932 = CARTESIAN_POINT('',(1.217632698071,1.125,5.551115123126E-17));+#6933 = VECTOR('',#6934,1.);+#6934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6935 = PCURVE('',#4964,#6936);+#6936 = DEFINITIONAL_REPRESENTATION('',(#6937),#6941);+#6937 = LINE('',#6938,#6939);+#6938 = CARTESIAN_POINT('',(0.,0.));+#6939 = VECTOR('',#6940,1.);+#6940 = DIRECTION('',(0.,-1.));+#6941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6942 = PCURVE('',#4936,#6943);+#6943 = DEFINITIONAL_REPRESENTATION('',(#6944),#6948);+#6944 = LINE('',#6945,#6946);+#6945 = CARTESIAN_POINT('',(4.886921905584,0.));+#6946 = VECTOR('',#6947,1.);+#6947 = DIRECTION('',(2.537652627715E-15,-1.));+#6948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6949 = ORIENTED_EDGE('',*,*,#5223,.T.);+#6950 = ORIENTED_EDGE('',*,*,#6902,.F.);+#6951 = ORIENTED_EDGE('',*,*,#4948,.F.);+#6952 = ADVANCED_FACE('',(#6953),#4936,.T.);+#6953 = FACE_BOUND('',#6954,.T.);+#6954 = EDGE_LOOP('',(#6955,#6956,#6957,#6958));+#6955 = ORIENTED_EDGE('',*,*,#4919,.T.);+#6956 = ORIENTED_EDGE('',*,*,#6929,.T.);+#6957 = ORIENTED_EDGE('',*,*,#5199,.F.);+#6958 = ORIENTED_EDGE('',*,*,#6959,.F.);+#6959 = EDGE_CURVE('',#4892,#5177,#6960,.T.);+#6960 = SURFACE_CURVE('',#6961,(#6965,#6972),.PCURVE_S1.);+#6961 = LINE('',#6962,#6963);+#6962 = CARTESIAN_POINT('',(0.971430759818,1.125,0.206587955583));+#6963 = VECTOR('',#6964,1.);+#6964 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6965 = PCURVE('',#4936,#6966);+#6966 = DEFINITIONAL_REPRESENTATION('',(#6967),#6971);+#6967 = LINE('',#6968,#6969);+#6968 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16));+#6969 = VECTOR('',#6970,1.);+#6970 = DIRECTION('',(0.,-1.));+#6971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6972 = PCURVE('',#4907,#6973);+#6973 = DEFINITIONAL_REPRESENTATION('',(#6974),#6978);+#6974 = LINE('',#6975,#6976);+#6975 = CARTESIAN_POINT('',(0.16240659224,-2.547960122519E-18));+#6976 = VECTOR('',#6977,1.);+#6977 = DIRECTION('',(-2.52495221085E-29,-1.));+#6978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6979 = ADVANCED_FACE('',(#6980),#4907,.F.);+#6980 = FACE_BOUND('',#6981,.F.);+#6981 = EDGE_LOOP('',(#6982,#6983,#6984,#6985));+#6982 = ORIENTED_EDGE('',*,*,#5148,.T.);+#6983 = ORIENTED_EDGE('',*,*,#5176,.T.);+#6984 = ORIENTED_EDGE('',*,*,#6959,.F.);+#6985 = ORIENTED_EDGE('',*,*,#4891,.F.);+#6986 = ADVANCED_FACE('',(#6987),#5645,.T.);+#6987 = FACE_BOUND('',#6988,.T.);+#6988 = EDGE_LOOP('',(#6989,#6990,#6991,#6992));+#6989 = ORIENTED_EDGE('',*,*,#5628,.T.);+#6990 = ORIENTED_EDGE('',*,*,#6172,.T.);+#6991 = ORIENTED_EDGE('',*,*,#5905,.F.);+#6992 = ORIENTED_EDGE('',*,*,#6993,.F.);+#6993 = EDGE_CURVE('',#5601,#5883,#6994,.T.);+#6994 = SURFACE_CURVE('',#6995,(#6999,#7006),.PCURVE_S1.);+#6995 = LINE('',#6996,#6997);+#6996 = CARTESIAN_POINT('',(1.096201938253,-0.775,0.393412044417));+#6997 = VECTOR('',#6998,1.);+#6998 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6999 = PCURVE('',#5645,#7000);+#7000 = DEFINITIONAL_REPRESENTATION('',(#7001),#7005);+#7001 = LINE('',#7002,#7003);+#7002 = CARTESIAN_POINT('',(6.28318530718,0.));+#7003 = VECTOR('',#7004,1.);+#7004 = DIRECTION('',(0.,-1.));+#7005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7006 = PCURVE('',#5616,#7007);+#7007 = DEFINITIONAL_REPRESENTATION('',(#7008),#7012);+#7008 = LINE('',#7009,#7010);+#7009 = CARTESIAN_POINT('',(0.16240659224,2.547960122519E-18));+#7010 = VECTOR('',#7011,1.);+#7011 = DIRECTION('',(2.52495221085E-29,-1.));+#7012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7013 = ADVANCED_FACE('',(#7014),#5616,.F.);+#7014 = FACE_BOUND('',#7015,.F.);+#7015 = EDGE_LOOP('',(#7016,#7037,#7038,#7039));+#7016 = ORIENTED_EDGE('',*,*,#7017,.T.);+#7017 = EDGE_CURVE('',#5568,#5855,#7018,.T.);+#7018 = SURFACE_CURVE('',#7019,(#7023,#7030),.PCURVE_S1.);+#7019 = LINE('',#7020,#7021);+#7020 = CARTESIAN_POINT('',(1.11915192277,-0.775,0.232635182233));+#7021 = VECTOR('',#7022,1.);+#7022 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7023 = PCURVE('',#5616,#7024);+#7024 = DEFINITIONAL_REPRESENTATION('',(#7025),#7029);+#7025 = LINE('',#7026,#7027);+#7026 = CARTESIAN_POINT('',(0.,0.));+#7027 = VECTOR('',#7028,1.);+#7028 = DIRECTION('',(2.52495221085E-29,-1.));+#7029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7030 = PCURVE('',#5588,#7031);+#7031 = DEFINITIONAL_REPRESENTATION('',(#7032),#7036);+#7032 = LINE('',#7033,#7034);+#7033 = CARTESIAN_POINT('',(1.396263401592,0.));+#7034 = VECTOR('',#7035,1.);+#7035 = DIRECTION('',(6.344131569287E-16,-1.));+#7036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7037 = ORIENTED_EDGE('',*,*,#5882,.T.);+#7038 = ORIENTED_EDGE('',*,*,#6993,.F.);+#7039 = ORIENTED_EDGE('',*,*,#5600,.F.);+#7040 = ADVANCED_FACE('',(#7041),#5588,.F.);+#7041 = FACE_BOUND('',#7042,.F.);+#7042 = EDGE_LOOP('',(#7043,#7064,#7065,#7066));+#7043 = ORIENTED_EDGE('',*,*,#7044,.T.);+#7044 = EDGE_CURVE('',#5540,#5832,#7045,.T.);+#7045 = SURFACE_CURVE('',#7046,(#7050,#7057),.PCURVE_S1.);+#7046 = LINE('',#7047,#7048);+#7047 = CARTESIAN_POINT('',(1.217632698071,-0.775,0.15));+#7048 = VECTOR('',#7049,1.);+#7049 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7050 = PCURVE('',#5588,#7051);+#7051 = DEFINITIONAL_REPRESENTATION('',(#7052),#7056);+#7052 = LINE('',#7053,#7054);+#7053 = CARTESIAN_POINT('',(0.,0.));+#7054 = VECTOR('',#7055,1.);+#7055 = DIRECTION('',(0.,-1.));+#7056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7057 = PCURVE('',#5555,#7058);+#7058 = DEFINITIONAL_REPRESENTATION('',(#7059),#7063);+#7059 = LINE('',#7060,#7061);+#7060 = CARTESIAN_POINT('',(0.182367301929,2.024683775403E-17));+#7061 = VECTOR('',#7062,1.);+#7062 = DIRECTION('',(0.,-1.));+#7063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7064 = ORIENTED_EDGE('',*,*,#5854,.T.);+#7065 = ORIENTED_EDGE('',*,*,#7017,.F.);+#7066 = ORIENTED_EDGE('',*,*,#5567,.F.);+#7067 = ADVANCED_FACE('',(#7068),#5555,.F.);+#7068 = FACE_BOUND('',#7069,.F.);+#7069 = EDGE_LOOP('',(#7070,#7091,#7092,#7093));+#7070 = ORIENTED_EDGE('',*,*,#7071,.T.);+#7071 = EDGE_CURVE('',#5512,#5809,#7072,.T.);+#7072 = SURFACE_CURVE('',#7073,(#7077,#7084),.PCURVE_S1.);+#7073 = LINE('',#7074,#7075);+#7074 = CARTESIAN_POINT('',(1.4,-0.775,0.15));+#7075 = VECTOR('',#7076,1.);+#7076 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7077 = PCURVE('',#5555,#7078);+#7078 = DEFINITIONAL_REPRESENTATION('',(#7079),#7083);+#7079 = LINE('',#7080,#7081);+#7080 = CARTESIAN_POINT('',(-0.,0.));+#7081 = VECTOR('',#7082,1.);+#7082 = DIRECTION('',(0.,-1.));+#7083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7084 = PCURVE('',#5527,#7085);+#7085 = DEFINITIONAL_REPRESENTATION('',(#7086),#7090);+#7086 = LINE('',#7087,#7088);+#7087 = CARTESIAN_POINT('',(0.15,0.));+#7088 = VECTOR('',#7089,1.);+#7089 = DIRECTION('',(0.,-1.));+#7090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7091 = ORIENTED_EDGE('',*,*,#5831,.T.);+#7092 = ORIENTED_EDGE('',*,*,#7044,.F.);+#7093 = ORIENTED_EDGE('',*,*,#5539,.F.);+#7094 = ADVANCED_FACE('',(#7095),#5527,.F.);+#7095 = FACE_BOUND('',#7096,.F.);+#7096 = EDGE_LOOP('',(#7097,#7118,#7119,#7120));+#7097 = ORIENTED_EDGE('',*,*,#7098,.T.);+#7098 = EDGE_CURVE('',#5484,#5786,#7099,.T.);+#7099 = SURFACE_CURVE('',#7100,(#7104,#7111),.PCURVE_S1.);+#7100 = LINE('',#7101,#7102);+#7101 = CARTESIAN_POINT('',(1.4,-0.775,5.551115123126E-17));+#7102 = VECTOR('',#7103,1.);+#7103 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7104 = PCURVE('',#5527,#7105);+#7105 = DEFINITIONAL_REPRESENTATION('',(#7106),#7110);+#7106 = LINE('',#7107,#7108);+#7107 = CARTESIAN_POINT('',(0.,0.));+#7108 = VECTOR('',#7109,1.);+#7109 = DIRECTION('',(0.,-1.));+#7110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7111 = PCURVE('',#5499,#7112);+#7112 = DEFINITIONAL_REPRESENTATION('',(#7113),#7117);+#7113 = LINE('',#7114,#7115);+#7114 = CARTESIAN_POINT('',(0.182367301929,-2.024683775403E-17));+#7115 = VECTOR('',#7116,1.);+#7116 = DIRECTION('',(0.,-1.));+#7117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7118 = ORIENTED_EDGE('',*,*,#5808,.T.);+#7119 = ORIENTED_EDGE('',*,*,#7071,.F.);+#7120 = ORIENTED_EDGE('',*,*,#5511,.F.);+#7121 = ADVANCED_FACE('',(#7122),#5499,.F.);+#7122 = FACE_BOUND('',#7123,.F.);+#7123 = EDGE_LOOP('',(#7124,#7145,#7146,#7147));+#7124 = ORIENTED_EDGE('',*,*,#7125,.T.);+#7125 = EDGE_CURVE('',#5455,#5762,#7126,.T.);+#7126 = SURFACE_CURVE('',#7127,(#7131,#7138),.PCURVE_S1.);+#7127 = LINE('',#7128,#7129);+#7128 = CARTESIAN_POINT('',(1.217632698071,-0.775,5.551115123126E-17));+#7129 = VECTOR('',#7130,1.);+#7130 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7131 = PCURVE('',#5499,#7132);+#7132 = DEFINITIONAL_REPRESENTATION('',(#7133),#7137);+#7133 = LINE('',#7134,#7135);+#7134 = CARTESIAN_POINT('',(0.,0.));+#7135 = VECTOR('',#7136,1.);+#7136 = DIRECTION('',(0.,-1.));+#7137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7138 = PCURVE('',#5471,#7139);+#7139 = DEFINITIONAL_REPRESENTATION('',(#7140),#7144);+#7140 = LINE('',#7141,#7142);+#7141 = CARTESIAN_POINT('',(4.886921905584,0.));+#7142 = VECTOR('',#7143,1.);+#7143 = DIRECTION('',(2.537652627715E-15,-1.));+#7144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7145 = ORIENTED_EDGE('',*,*,#5785,.T.);+#7146 = ORIENTED_EDGE('',*,*,#7098,.F.);+#7147 = ORIENTED_EDGE('',*,*,#5483,.F.);+#7148 = ADVANCED_FACE('',(#7149),#5471,.T.);+#7149 = FACE_BOUND('',#7150,.T.);+#7150 = EDGE_LOOP('',(#7151,#7152,#7153,#7154));+#7151 = ORIENTED_EDGE('',*,*,#5454,.T.);+#7152 = ORIENTED_EDGE('',*,*,#7125,.T.);+#7153 = ORIENTED_EDGE('',*,*,#5761,.F.);+#7154 = ORIENTED_EDGE('',*,*,#7155,.F.);+#7155 = EDGE_CURVE('',#5427,#5739,#7156,.T.);+#7156 = SURFACE_CURVE('',#7157,(#7161,#7168),.PCURVE_S1.);+#7157 = LINE('',#7158,#7159);+#7158 = CARTESIAN_POINT('',(0.971430759818,-0.775,0.206587955583));+#7159 = VECTOR('',#7160,1.);+#7160 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7161 = PCURVE('',#5471,#7162);+#7162 = DEFINITIONAL_REPRESENTATION('',(#7163),#7167);+#7163 = LINE('',#7164,#7165);+#7164 = CARTESIAN_POINT('',(6.28318530718,0.));+#7165 = VECTOR('',#7166,1.);+#7166 = DIRECTION('',(0.,-1.));+#7167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7168 = PCURVE('',#5442,#7169);+#7169 = DEFINITIONAL_REPRESENTATION('',(#7170),#7174);+#7170 = LINE('',#7171,#7172);+#7171 = CARTESIAN_POINT('',(0.16240659224,-2.547960122519E-18));+#7172 = VECTOR('',#7173,1.);+#7173 = DIRECTION('',(-2.52495221085E-29,-1.));+#7174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7175 = ADVANCED_FACE('',(#7176),#5442,.F.);+#7176 = FACE_BOUND('',#7177,.F.);+#7177 = EDGE_LOOP('',(#7178,#7179,#7180,#7181));+#7178 = ORIENTED_EDGE('',*,*,#5710,.T.);+#7179 = ORIENTED_EDGE('',*,*,#5738,.T.);+#7180 = ORIENTED_EDGE('',*,*,#7155,.F.);+#7181 = ORIENTED_EDGE('',*,*,#5426,.F.);+#7182 = ADVANCED_FACE('',(#7183),#6130,.F.);+#7183 = FACE_BOUND('',#7184,.T.);+#7184 = EDGE_LOOP('',(#7185));+#7185 = ORIENTED_EDGE('',*,*,#6109,.F.);+#7186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7190)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7187,#7188,#7189)) REPRESENTATION_CONTEXT ('Context #1','3D Context with UNIT and UNCERTAINTY') );-#7209 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );-#7210 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );-#7211 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );-#7212 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7209,+#7187 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#7188 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#7189 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#7190 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7187, 'distance_accuracy_value','confusion accuracy');-#7213 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7214,#7216);-#7214 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) -REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7215) -SHAPE_REPRESENTATION_RELATIONSHIP() );-#7215 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);-#7216 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',- #7217);-#7217 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:2]','',#5,#31,$);-#7218 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));-#7219 = SHAPE_DEFINITION_REPRESENTATION(#7220,#7226);-#7220 = PRODUCT_DEFINITION_SHAPE('','',#7221);-#7221 = PRODUCT_DEFINITION('design','',#7222,#7225);-#7222 = PRODUCT_DEFINITION_FORMATION('','',#7223);-#7223 = PRODUCT('Adom.LaserEtch','Adom.LaserEtch','',(#7224));-#7224 = PRODUCT_CONTEXT('',#2,'mechanical');-#7225 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');-#7226 = SHAPE_REPRESENTATION('',(#11,#7227,#8107,#8749,#10437,#11551,- #13005,#15255,#17583,#19271,#19601,#21851,#22493,#24259,#25291,- #25621),#26263);-#7227 = MANIFOLD_SOLID_BREP('',#7228);-#7228 = CLOSED_SHELL('',(#7229,#7349,#7425,#7501,#7577,#7653,#7729,#7800- ,#7847,#7957,#8028,#8075,#8091));-#7229 = ADVANCED_FACE('',(#7230),#7244,.F.);-#7230 = FACE_BOUND('',#7231,.F.);-#7231 = EDGE_LOOP('',(#7232,#7267,#7295,#7323));-#7232 = ORIENTED_EDGE('',*,*,#7233,.T.);-#7233 = EDGE_CURVE('',#7234,#7236,#7238,.T.);-#7234 = VERTEX_POINT('',#7235);-#7235 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5450001- ));-#7236 = VERTEX_POINT('',#7237);-#7237 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5050001- ));-#7238 = SURFACE_CURVE('',#7239,(#7243,#7255),.PCURVE_S1.);+#7191 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#7192 = SHAPE_DEFINITION_REPRESENTATION(#7193,#7199);+#7193 = PRODUCT_DEFINITION_SHAPE('','',#7194);+#7194 = PRODUCT_DEFINITION('design','',#7195,#7198);+#7195 = PRODUCT_DEFINITION_FORMATION('','',#7196);+#7196 = PRODUCT('Adom.LaserEtch','Adom.LaserEtch','',(#7197));+#7197 = PRODUCT_CONTEXT('',#2,'mechanical');+#7198 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#7199 = SHAPE_REPRESENTATION('',(#11,#7200,#7388,#7526,#7872,#8108,#8406+ ,#8864,#9338,#9684,#9758,#10216,#10354,#10588,#10806,#10880),#11018+ );+#7200 = SHELL_BASED_SURFACE_MODEL('',(#7201));+#7201 = OPEN_SHELL('',(#7202));+#7202 = ADVANCED_FACE('',(#7203,#7338),#7217,.T.);+#7203 = FACE_BOUND('',#7204,.F.);+#7204 = EDGE_LOOP('',(#7205,#7228,#7244,#7260,#7276,#7292,#7308,#7324));+#7205 = ORIENTED_EDGE('',*,*,#7206,.T.);+#7206 = EDGE_CURVE('',#7207,#7209,#7211,.T.);+#7207 = VERTEX_POINT('',#7208);+#7208 = CARTESIAN_POINT('',(-9.60236842558E-02,1.183197268375,0.955));+#7209 = VERTEX_POINT('',#7210);+#7210 = CARTESIAN_POINT('',(9.628129306668E-02,1.131289092983,0.955));+#7211 = SURFACE_CURVE('',#7212,(#7216),.PCURVE_S1.);+#7212 = LINE('',#7213,#7214);+#7213 = CARTESIAN_POINT('',(-9.60236842558E-02,1.183197268375,0.955));+#7214 = VECTOR('',#7215,1.);+#7215 = DIRECTION('',(0.965446980809,-0.260599553427,0.));+#7216 = PCURVE('',#7217,#7222);+#7217 = PLANE('',#7218);+#7218 = AXIS2_PLACEMENT_3D('',#7219,#7220,#7221);+#7219 = CARTESIAN_POINT('',(-9.60236842558E-02,1.187447813755,0.955));+#7220 = DIRECTION('',(0.,0.,1.));+#7221 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7222 = DEFINITIONAL_REPRESENTATION('',(#7223),#7227);+#7223 = LINE('',#7224,#7225);+#7224 = CARTESIAN_POINT('',(4.250545379532E-03,9.438106695142E-19));+#7225 = VECTOR('',#7226,1.);+#7226 = DIRECTION('',(0.260599553427,0.965446980809));+#7227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7228 = ORIENTED_EDGE('',*,*,#7229,.T.);+#7229 = EDGE_CURVE('',#7209,#7230,#7232,.T.);+#7230 = VERTEX_POINT('',#7231);+#7231 = CARTESIAN_POINT('',(9.628129306668E-02,1.084790702619,0.955));+#7232 = SURFACE_CURVE('',#7233,(#7237),.PCURVE_S1.);+#7233 = LINE('',#7234,#7235);+#7234 = CARTESIAN_POINT('',(9.628129306668E-02,1.131289092983,0.955));+#7235 = VECTOR('',#7236,1.);+#7236 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7237 = PCURVE('',#7217,#7238);+#7238 = DEFINITIONAL_REPRESENTATION('',(#7239),#7243); #7239 = LINE('',#7240,#7241);-#7240 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5450001- ));+#7240 = CARTESIAN_POINT('',(5.6158720772E-02,0.192304977322)); #7241 = VECTOR('',#7242,1.);-#7242 = DIRECTION('',(-0.,-0.,-1.));-#7243 = PCURVE('',#7244,#7249);-#7244 = PLANE('',#7245);-#7245 = AXIS2_PLACEMENT_3D('',#7246,#7247,#7248);-#7246 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5450001- ));-#7247 = DIRECTION('',(0.956207271968,-0.292690370589,0.));-#7248 = DIRECTION('',(0.292690370589,0.956207271968,0.));-#7249 = DEFINITIONAL_REPRESENTATION('',(#7250),#7254);-#7250 = LINE('',#7251,#7252);-#7251 = CARTESIAN_POINT('',(0.,0.));-#7252 = VECTOR('',#7253,1.);-#7253 = DIRECTION('',(0.,-1.));-#7254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7255 = PCURVE('',#7256,#7261);-#7256 = PLANE('',#7257);-#7257 = AXIS2_PLACEMENT_3D('',#7258,#7259,#7260);-#7258 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5450001));-#7259 = DIRECTION('',(0.,1.,0.));-#7260 = DIRECTION('',(-1.,0.,0.));-#7261 = DEFINITIONAL_REPRESENTATION('',(#7262),#7266);-#7262 = LINE('',#7263,#7264);-#7263 = CARTESIAN_POINT('',(1.7462022569E-02,0.));-#7264 = VECTOR('',#7265,1.);-#7265 = DIRECTION('',(0.,-1.));-#7266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7267 = ORIENTED_EDGE('',*,*,#7268,.T.);-#7268 = EDGE_CURVE('',#7236,#7269,#7271,.T.);-#7269 = VERTEX_POINT('',#7270);-#7270 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5050001)- );-#7271 = SURFACE_CURVE('',#7272,(#7276,#7283),.PCURVE_S1.);-#7272 = LINE('',#7273,#7274);-#7273 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5050001- ));-#7274 = VECTOR('',#7275,1.);-#7275 = DIRECTION('',(0.292690370589,0.956207271968,0.));-#7276 = PCURVE('',#7244,#7277);-#7277 = DEFINITIONAL_REPRESENTATION('',(#7278),#7282);-#7278 = LINE('',#7279,#7280);-#7279 = CARTESIAN_POINT('',(0.,-4.E-02));-#7280 = VECTOR('',#7281,1.);-#7281 = DIRECTION('',(1.,0.));-#7282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7283 = PCURVE('',#7284,#7289);-#7284 = PLANE('',#7285);-#7285 = AXIS2_PLACEMENT_3D('',#7286,#7287,#7288);-#7286 = CARTESIAN_POINT('',(-0.772631835938,-5.923719618056E-02,- 1.5050001));-#7287 = DIRECTION('',(0.,0.,1.));-#7288 = DIRECTION('',(1.,0.,-0.));-#7289 = DEFINITIONAL_REPRESENTATION('',(#7290),#7294);-#7290 = LINE('',#7291,#7292);-#7291 = CARTESIAN_POINT('',(3.091362848E-03,0.));-#7292 = VECTOR('',#7293,1.);-#7293 = DIRECTION('',(0.292690370589,0.956207271968));-#7294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7295 = ORIENTED_EDGE('',*,*,#7296,.F.);-#7296 = EDGE_CURVE('',#7297,#7269,#7299,.T.);-#7297 = VERTEX_POINT('',#7298);-#7298 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5450001)- );-#7299 = SURFACE_CURVE('',#7300,(#7304,#7311),.PCURVE_S1.);-#7300 = LINE('',#7301,#7302);-#7301 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5450001)- );-#7302 = VECTOR('',#7303,1.);-#7303 = DIRECTION('',(-0.,-0.,-1.));-#7304 = PCURVE('',#7244,#7305);-#7305 = DEFINITIONAL_REPRESENTATION('',(#7306),#7310);-#7306 = LINE('',#7307,#7308);-#7307 = CARTESIAN_POINT('',(0.130453586852,0.));-#7308 = VECTOR('',#7309,1.);-#7309 = DIRECTION('',(0.,-1.));-#7310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7311 = PCURVE('',#7312,#7317);-#7312 = PLANE('',#7313);-#7313 = AXIS2_PLACEMENT_3D('',#7314,#7315,#7316);-#7314 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5450001)- );-#7315 = DIRECTION('',(0.,-1.,0.));-#7316 = DIRECTION('',(1.,0.,0.));-#7317 = DEFINITIONAL_REPRESENTATION('',(#7318),#7322);-#7318 = LINE('',#7319,#7320);-#7319 = CARTESIAN_POINT('',(0.,0.));-#7320 = VECTOR('',#7321,1.);-#7321 = DIRECTION('',(0.,-1.));-#7322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7323 = ORIENTED_EDGE('',*,*,#7324,.F.);-#7324 = EDGE_CURVE('',#7234,#7297,#7325,.T.);-#7325 = SURFACE_CURVE('',#7326,(#7330,#7337),.PCURVE_S1.);-#7326 = LINE('',#7327,#7328);-#7327 = CARTESIAN_POINT('',(-0.76954047309,-5.923719618056E-02,1.5450001- ));-#7328 = VECTOR('',#7329,1.);-#7329 = DIRECTION('',(0.292690370589,0.956207271968,0.));-#7330 = PCURVE('',#7244,#7331);-#7331 = DEFINITIONAL_REPRESENTATION('',(#7332),#7336);-#7332 = LINE('',#7333,#7334);-#7333 = CARTESIAN_POINT('',(0.,0.));-#7334 = VECTOR('',#7335,1.);-#7335 = DIRECTION('',(1.,0.));-#7336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7337 = PCURVE('',#7338,#7343);-#7338 = PLANE('',#7339);-#7339 = AXIS2_PLACEMENT_3D('',#7340,#7341,#7342);-#7340 = CARTESIAN_POINT('',(-0.772631835938,-5.923719618056E-02,- 1.5450001));-#7341 = DIRECTION('',(0.,0.,1.));-#7342 = DIRECTION('',(1.,0.,-0.));-#7343 = DEFINITIONAL_REPRESENTATION('',(#7344),#7348);-#7344 = LINE('',#7345,#7346);-#7345 = CARTESIAN_POINT('',(3.091362848E-03,0.));-#7346 = VECTOR('',#7347,1.);-#7347 = DIRECTION('',(0.292690370589,0.956207271968));-#7348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7349 = ADVANCED_FACE('',(#7350),#7312,.F.);-#7350 = FACE_BOUND('',#7351,.F.);-#7351 = EDGE_LOOP('',(#7352,#7353,#7376,#7404));-#7352 = ORIENTED_EDGE('',*,*,#7296,.T.);-#7353 = ORIENTED_EDGE('',*,*,#7354,.T.);-#7354 = EDGE_CURVE('',#7269,#7355,#7357,.T.);-#7355 = VERTEX_POINT('',#7356);-#7356 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5050001)- );-#7357 = SURFACE_CURVE('',#7358,(#7362,#7369),.PCURVE_S1.);-#7358 = LINE('',#7359,#7360);-#7359 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5050001)- );-#7360 = VECTOR('',#7361,1.);-#7361 = DIRECTION('',(1.,0.,0.));-#7362 = PCURVE('',#7312,#7363);-#7363 = DEFINITIONAL_REPRESENTATION('',(#7364),#7368);-#7364 = LINE('',#7365,#7366);-#7365 = CARTESIAN_POINT('',(0.,-4.E-02));-#7366 = VECTOR('',#7367,1.);-#7367 = DIRECTION('',(1.,0.));-#7368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7369 = PCURVE('',#7284,#7370);-#7370 = DEFINITIONAL_REPRESENTATION('',(#7371),#7375);-#7371 = LINE('',#7372,#7373);-#7372 = CARTESIAN_POINT('',(4.1273871528E-02,0.124740668403));-#7373 = VECTOR('',#7374,1.);-#7374 = DIRECTION('',(1.,0.));-#7375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7376 = ORIENTED_EDGE('',*,*,#7377,.F.);-#7377 = EDGE_CURVE('',#7378,#7355,#7380,.T.);-#7378 = VERTEX_POINT('',#7379);-#7379 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5450001)- );-#7380 = SURFACE_CURVE('',#7381,(#7385,#7392),.PCURVE_S1.);-#7381 = LINE('',#7382,#7383);-#7382 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5450001)- );-#7383 = VECTOR('',#7384,1.);-#7384 = DIRECTION('',(-0.,-0.,-1.));-#7385 = PCURVE('',#7312,#7386);-#7386 = DEFINITIONAL_REPRESENTATION('',(#7387),#7391);-#7387 = LINE('',#7388,#7389);-#7388 = CARTESIAN_POINT('',(2.046983507E-02,0.));-#7389 = VECTOR('',#7390,1.);-#7390 = DIRECTION('',(0.,-1.));-#7391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7392 = PCURVE('',#7393,#7398);-#7393 = PLANE('',#7394);-#7394 = AXIS2_PLACEMENT_3D('',#7395,#7396,#7397);-#7395 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5450001)- );-#7396 = DIRECTION('',(-0.956207271968,-0.292690370589,0.));-#7397 = DIRECTION('',(0.292690370589,-0.956207271968,0.));-#7398 = DEFINITIONAL_REPRESENTATION('',(#7399),#7403);-#7399 = LINE('',#7400,#7401);-#7400 = CARTESIAN_POINT('',(0.,0.));-#7401 = VECTOR('',#7402,1.);-#7402 = DIRECTION('',(0.,-1.));-#7403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7404 = ORIENTED_EDGE('',*,*,#7405,.F.);-#7405 = EDGE_CURVE('',#7297,#7378,#7406,.T.);-#7406 = SURFACE_CURVE('',#7407,(#7411,#7418),.PCURVE_S1.);-#7407 = LINE('',#7408,#7409);-#7408 = CARTESIAN_POINT('',(-0.73135796441,6.550347222222E-02,1.5450001)- );-#7409 = VECTOR('',#7410,1.);-#7410 = DIRECTION('',(1.,0.,0.));-#7411 = PCURVE('',#7312,#7412);-#7412 = DEFINITIONAL_REPRESENTATION('',(#7413),#7417);-#7413 = LINE('',#7414,#7415);-#7414 = CARTESIAN_POINT('',(0.,0.));-#7415 = VECTOR('',#7416,1.);-#7416 = DIRECTION('',(1.,0.));-#7417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7418 = PCURVE('',#7338,#7419);-#7419 = DEFINITIONAL_REPRESENTATION('',(#7420),#7424);-#7420 = LINE('',#7421,#7422);-#7421 = CARTESIAN_POINT('',(4.1273871528E-02,0.124740668403));-#7422 = VECTOR('',#7423,1.);-#7423 = DIRECTION('',(1.,0.));-#7424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7425 = ADVANCED_FACE('',(#7426),#7393,.F.);-#7426 = FACE_BOUND('',#7427,.F.);-#7427 = EDGE_LOOP('',(#7428,#7429,#7452,#7480));-#7428 = ORIENTED_EDGE('',*,*,#7377,.T.);-#7429 = ORIENTED_EDGE('',*,*,#7430,.T.);-#7430 = EDGE_CURVE('',#7355,#7431,#7433,.T.);-#7431 = VERTEX_POINT('',#7432);-#7432 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5050001- ));-#7433 = SURFACE_CURVE('',#7434,(#7438,#7445),.PCURVE_S1.);-#7434 = LINE('',#7435,#7436);-#7435 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5050001)- );-#7436 = VECTOR('',#7437,1.);-#7437 = DIRECTION('',(0.292690370589,-0.956207271968,0.));-#7438 = PCURVE('',#7393,#7439);-#7439 = DEFINITIONAL_REPRESENTATION('',(#7440),#7444);-#7440 = LINE('',#7441,#7442);-#7441 = CARTESIAN_POINT('',(0.,-4.E-02));-#7442 = VECTOR('',#7443,1.);-#7443 = DIRECTION('',(1.,0.));-#7444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7445 = PCURVE('',#7284,#7446);-#7446 = DEFINITIONAL_REPRESENTATION('',(#7447),#7451);-#7447 = LINE('',#7448,#7449);-#7448 = CARTESIAN_POINT('',(6.1743706598E-02,0.124740668403));-#7449 = VECTOR('',#7450,1.);-#7450 = DIRECTION('',(0.292690370589,-0.956207271968));-#7451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7452 = ORIENTED_EDGE('',*,*,#7453,.F.);-#7453 = EDGE_CURVE('',#7454,#7431,#7456,.T.);-#7454 = VERTEX_POINT('',#7455);-#7455 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5450001- ));-#7456 = SURFACE_CURVE('',#7457,(#7461,#7468),.PCURVE_S1.);-#7457 = LINE('',#7458,#7459);-#7458 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5450001- ));-#7459 = VECTOR('',#7460,1.);-#7460 = DIRECTION('',(-0.,-0.,-1.));-#7461 = PCURVE('',#7393,#7462);-#7462 = DEFINITIONAL_REPRESENTATION('',(#7463),#7467);-#7463 = LINE('',#7464,#7465);-#7464 = CARTESIAN_POINT('',(0.130453586852,0.));-#7465 = VECTOR('',#7466,1.);-#7466 = DIRECTION('',(0.,-1.));-#7467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7468 = PCURVE('',#7469,#7474);-#7469 = PLANE('',#7470);-#7470 = AXIS2_PLACEMENT_3D('',#7471,#7472,#7473);-#7471 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5450001- ));-#7472 = DIRECTION('',(0.,1.,0.));-#7473 = DIRECTION('',(-1.,0.,0.));+#7242 = DIRECTION('',(1.,0.));+#7243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7244 = ORIENTED_EDGE('',*,*,#7245,.T.);+#7245 = EDGE_CURVE('',#7230,#7246,#7248,.T.);+#7246 = VERTEX_POINT('',#7247);+#7247 = CARTESIAN_POINT('',(-9.60236842558E-02,1.032882527226,0.955));+#7248 = SURFACE_CURVE('',#7249,(#7253),.PCURVE_S1.);+#7249 = LINE('',#7250,#7251);+#7250 = CARTESIAN_POINT('',(9.628129306668E-02,1.084790702619,0.955));+#7251 = VECTOR('',#7252,1.);+#7252 = DIRECTION('',(-0.965446980809,-0.260599553427,0.));+#7253 = PCURVE('',#7217,#7254);+#7254 = DEFINITIONAL_REPRESENTATION('',(#7255),#7259);+#7255 = LINE('',#7256,#7257);+#7256 = CARTESIAN_POINT('',(0.102657111136,0.192304977322));+#7257 = VECTOR('',#7258,1.);+#7258 = DIRECTION('',(0.260599553427,-0.965446980809));+#7259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7260 = ORIENTED_EDGE('',*,*,#7261,.T.);+#7261 = EDGE_CURVE('',#7246,#7262,#7264,.T.);+#7262 = VERTEX_POINT('',#7263);+#7263 = CARTESIAN_POINT('',(-9.60236842558E-02,1.070879826831,0.955));+#7264 = SURFACE_CURVE('',#7265,(#7269),.PCURVE_S1.);+#7265 = LINE('',#7266,#7267);+#7266 = CARTESIAN_POINT('',(-9.60236842558E-02,1.032882527226,0.955));+#7267 = VECTOR('',#7268,1.);+#7268 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7269 = PCURVE('',#7217,#7270);+#7270 = DEFINITIONAL_REPRESENTATION('',(#7271),#7275);+#7271 = LINE('',#7272,#7273);+#7272 = CARTESIAN_POINT('',(0.154565286528,6.564812366705E-18));+#7273 = VECTOR('',#7274,1.);+#7274 = DIRECTION('',(-1.,0.));+#7275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7276 = ORIENTED_EDGE('',*,*,#7277,.T.);+#7277 = EDGE_CURVE('',#7262,#7278,#7280,.T.);+#7278 = VERTEX_POINT('',#7279);+#7279 = CARTESIAN_POINT('',(-4.84948586483E-02,1.082729832132,0.955));+#7280 = SURFACE_CURVE('',#7281,(#7285),.PCURVE_S1.);+#7281 = LINE('',#7282,#7283);+#7282 = CARTESIAN_POINT('',(-9.60236842558E-02,1.070879826831,0.955));+#7283 = VECTOR('',#7284,1.);+#7284 = DIRECTION('',(0.970296981152,0.24191686251,0.));+#7285 = PCURVE('',#7217,#7286);+#7286 = DEFINITIONAL_REPRESENTATION('',(#7287),#7291);+#7287 = LINE('',#7288,#7289);+#7288 = CARTESIAN_POINT('',(0.116567986924,-1.872283012285E-18));+#7289 = VECTOR('',#7290,1.);+#7290 = DIRECTION('',(-0.24191686251,0.970296981152));+#7291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7292 = ORIENTED_EDGE('',*,*,#7293,.T.);+#7293 = EDGE_CURVE('',#7278,#7294,#7296,.T.);+#7294 = VERTEX_POINT('',#7295);+#7295 = CARTESIAN_POINT('',(-4.84948586483E-02,1.133607572281,0.955));+#7296 = SURFACE_CURVE('',#7297,(#7301),.PCURVE_S1.);+#7297 = LINE('',#7298,#7299);+#7298 = CARTESIAN_POINT('',(-4.84948586483E-02,1.082729832132,0.955));+#7299 = VECTOR('',#7300,1.);+#7300 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7301 = PCURVE('',#7217,#7302);+#7302 = DEFINITIONAL_REPRESENTATION('',(#7303),#7307);+#7303 = LINE('',#7304,#7305);+#7304 = CARTESIAN_POINT('',(0.104717981623,4.75288256075E-02));+#7305 = VECTOR('',#7306,1.);+#7306 = DIRECTION('',(-1.,0.));+#7307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7308 = ORIENTED_EDGE('',*,*,#7309,.T.);+#7309 = EDGE_CURVE('',#7294,#7310,#7312,.T.);+#7310 = VERTEX_POINT('',#7311);+#7311 = CARTESIAN_POINT('',(-9.60236842558E-02,1.14519996877,0.955));+#7312 = SURFACE_CURVE('',#7313,(#7317),.PCURVE_S1.);+#7313 = LINE('',#7314,#7315);+#7314 = CARTESIAN_POINT('',(-4.84948586483E-02,1.133607572281,0.955));+#7315 = VECTOR('',#7316,1.);+#7316 = DIRECTION('',(-0.971520338783,0.236956180191,0.));+#7317 = PCURVE('',#7217,#7318);+#7318 = DEFINITIONAL_REPRESENTATION('',(#7319),#7323);+#7319 = LINE('',#7320,#7321);+#7320 = CARTESIAN_POINT('',(5.384024147408E-02,4.75288256075E-02));+#7321 = VECTOR('',#7322,1.);+#7322 = DIRECTION('',(-0.236956180191,-0.971520338783));+#7323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7324 = ORIENTED_EDGE('',*,*,#7325,.T.);+#7325 = EDGE_CURVE('',#7310,#7207,#7326,.T.);+#7326 = SURFACE_CURVE('',#7327,(#7331),.PCURVE_S1.);+#7327 = LINE('',#7328,#7329);+#7328 = CARTESIAN_POINT('',(-9.60236842558E-02,1.14519996877,0.955));+#7329 = VECTOR('',#7330,1.);+#7330 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7331 = PCURVE('',#7217,#7332);+#7332 = DEFINITIONAL_REPRESENTATION('',(#7333),#7337);+#7333 = LINE('',#7334,#7335);+#7334 = CARTESIAN_POINT('',(4.224784498444E-02,-4.49688175931E-18));+#7335 = VECTOR('',#7336,1.);+#7336 = DIRECTION('',(-1.,0.));+#7337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7338 = FACE_BOUND('',#7339,.F.);+#7339 = EDGE_LOOP('',(#7340,#7358,#7374));+#7340 = ORIENTED_EDGE('',*,*,#7341,.T.);+#7341 = EDGE_CURVE('',#7342,#7344,#7346,.T.);+#7342 = VERTEX_POINT('',#7343);+#7343 = CARTESIAN_POINT('',(-1.719538812629E-02,1.090071683242,0.955));+#7344 = VERTEX_POINT('',#7345);+#7345 = CARTESIAN_POINT('',(6.150410359778E-02,1.108104300004,0.955));+#7346 = SURFACE_CURVE('',#7347,(#7351),.PCURVE_S1.);+#7347 = LINE('',#7348,#7349);+#7348 = CARTESIAN_POINT('',(-1.719538812629E-02,1.090071683242,0.955));+#7349 = VECTOR('',#7350,1.);+#7350 = DIRECTION('',(0.974739554513,0.223344578775,0.));+#7351 = PCURVE('',#7217,#7352);+#7352 = DEFINITIONAL_REPRESENTATION('',(#7353),#7357);+#7353 = LINE('',#7354,#7355);+#7354 = CARTESIAN_POINT('',(9.737613051292E-02,7.882829612951E-02));+#7355 = VECTOR('',#7356,1.);+#7356 = DIRECTION('',(-0.223344578775,0.974739554513));+#7357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7358 = ORIENTED_EDGE('',*,*,#7359,.T.);+#7359 = EDGE_CURVE('',#7344,#7360,#7362,.T.);+#7360 = VERTEX_POINT('',#7361);+#7361 = CARTESIAN_POINT('',(-1.719538812629E-02,1.12600811236,0.955));+#7362 = SURFACE_CURVE('',#7363,(#7367),.PCURVE_S1.);+#7363 = LINE('',#7364,#7365);+#7364 = CARTESIAN_POINT('',(6.150410359778E-02,1.108104300004,0.955));+#7365 = VECTOR('',#7366,1.);+#7366 = DIRECTION('',(-0.975085803822,0.221828030657,0.));+#7367 = PCURVE('',#7217,#7368);+#7368 = DEFINITIONAL_REPRESENTATION('',(#7369),#7373);+#7369 = LINE('',#7370,#7371);+#7370 = CARTESIAN_POINT('',(7.934351375127E-02,0.157527787854));+#7371 = VECTOR('',#7372,1.);+#7372 = DIRECTION('',(-0.221828030657,-0.975085803822));+#7373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7374 = ORIENTED_EDGE('',*,*,#7375,.T.);+#7375 = EDGE_CURVE('',#7360,#7342,#7376,.T.);+#7376 = SURFACE_CURVE('',#7377,(#7381),.PCURVE_S1.);+#7377 = LINE('',#7378,#7379);+#7378 = CARTESIAN_POINT('',(-1.719538812629E-02,1.12600811236,0.955));+#7379 = VECTOR('',#7380,1.);+#7380 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7381 = PCURVE('',#7217,#7382);+#7382 = DEFINITIONAL_REPRESENTATION('',(#7383),#7387);+#7383 = LINE('',#7384,#7385);+#7384 = CARTESIAN_POINT('',(6.143970139506E-02,7.882829612951E-02));+#7385 = VECTOR('',#7386,1.);+#7386 = DIRECTION('',(1.,0.));+#7387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7388 = SHELL_BASED_SURFACE_MODEL('',(#7389));+#7389 = OPEN_SHELL('',(#7390));+#7390 = ADVANCED_FACE('',(#7391),#7405,.T.);+#7391 = FACE_BOUND('',#7392,.F.);+#7392 = EDGE_LOOP('',(#7393,#7416,#7432,#7448,#7464,#7480,#7496,#7512));+#7393 = ORIENTED_EDGE('',*,*,#7394,.T.);+#7394 = EDGE_CURVE('',#7395,#7397,#7399,.T.);+#7395 = VERTEX_POINT('',#7396);+#7396 = CARTESIAN_POINT('',(6.304975646306E-02,0.93022541609,0.955));+#7397 = VERTEX_POINT('',#7398);+#7398 = CARTESIAN_POINT('',(-9.60236842558E-02,0.93022541609,0.955));+#7399 = SURFACE_CURVE('',#7400,(#7404),.PCURVE_S1.);+#7400 = LINE('',#7401,#7402);+#7401 = CARTESIAN_POINT('',(6.304975646306E-02,0.93022541609,0.955));+#7402 = VECTOR('',#7403,1.);+#7403 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7404 = PCURVE('',#7405,#7410);+#7405 = PLANE('',#7406);+#7406 = AXIS2_PLACEMENT_3D('',#7407,#7408,#7409);+#7407 = CARTESIAN_POINT('',(-9.60236842558E-02,1.028631981847,0.955));+#7408 = DIRECTION('',(0.,0.,1.));+#7409 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7410 = DEFINITIONAL_REPRESENTATION('',(#7411),#7415);+#7411 = LINE('',#7412,#7413);+#7412 = CARTESIAN_POINT('',(9.840656575645E-02,0.159073440719));+#7413 = VECTOR('',#7414,1.);+#7414 = DIRECTION('',(0.,-1.));+#7415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7416 = ORIENTED_EDGE('',*,*,#7417,.T.);+#7417 = EDGE_CURVE('',#7397,#7418,#7420,.T.);+#7418 = VERTEX_POINT('',#7419);+#7419 = CARTESIAN_POINT('',(-9.60236842558E-02,0.968222715695,0.955));+#7420 = SURFACE_CURVE('',#7421,(#7425),.PCURVE_S1.);+#7421 = LINE('',#7422,#7423);+#7422 = CARTESIAN_POINT('',(-9.60236842558E-02,0.93022541609,0.955));+#7423 = VECTOR('',#7424,1.);+#7424 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7425 = PCURVE('',#7405,#7426);+#7426 = DEFINITIONAL_REPRESENTATION('',(#7427),#7431);+#7427 = LINE('',#7428,#7429);+#7428 = CARTESIAN_POINT('',(9.840656575645E-02,2.185064701542E-17));+#7429 = VECTOR('',#7430,1.);+#7430 = DIRECTION('',(-1.,0.));+#7431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7432 = ORIENTED_EDGE('',*,*,#7433,.T.);+#7433 = EDGE_CURVE('',#7418,#7434,#7436,.T.);+#7434 = VERTEX_POINT('',#7435);+#7435 = CARTESIAN_POINT('',(6.304975646306E-02,0.968222715695,0.955));+#7436 = SURFACE_CURVE('',#7437,(#7441),.PCURVE_S1.);+#7437 = LINE('',#7438,#7439);+#7438 = CARTESIAN_POINT('',(-9.60236842558E-02,0.968222715695,0.955));+#7439 = VECTOR('',#7440,1.);+#7440 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#7441 = PCURVE('',#7405,#7442);+#7442 = DEFINITIONAL_REPRESENTATION('',(#7443),#7447);+#7443 = LINE('',#7444,#7445);+#7444 = CARTESIAN_POINT('',(6.040926615154E-02,1.341355163643E-17));+#7445 = VECTOR('',#7446,1.);+#7446 = DIRECTION('',(0.,1.));+#7447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7448 = ORIENTED_EDGE('',*,*,#7449,.T.);+#7449 = EDGE_CURVE('',#7434,#7450,#7452,.T.);+#7450 = VERTEX_POINT('',#7451);+#7451 = CARTESIAN_POINT('',(6.304975646306E-02,1.017039585357,0.955));+#7452 = SURFACE_CURVE('',#7453,(#7457),.PCURVE_S1.);+#7453 = LINE('',#7454,#7455);+#7454 = CARTESIAN_POINT('',(6.304975646306E-02,0.968222715695,0.955));+#7455 = VECTOR('',#7456,1.);+#7456 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7457 = PCURVE('',#7405,#7458);+#7458 = DEFINITIONAL_REPRESENTATION('',(#7459),#7463);+#7459 = LINE('',#7460,#7461);+#7460 = CARTESIAN_POINT('',(6.040926615154E-02,0.159073440719));+#7461 = VECTOR('',#7462,1.);+#7462 = DIRECTION('',(-1.,0.));+#7463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7464 = ORIENTED_EDGE('',*,*,#7465,.T.);+#7465 = EDGE_CURVE('',#7450,#7466,#7468,.T.);+#7466 = VERTEX_POINT('',#7467);+#7467 = CARTESIAN_POINT('',(9.628129306668E-02,1.017039585357,0.955));+#7468 = SURFACE_CURVE('',#7469,(#7473),.PCURVE_S1.);+#7469 = LINE('',#7470,#7471);+#7470 = CARTESIAN_POINT('',(6.304975646306E-02,1.017039585357,0.955));+#7471 = VECTOR('',#7472,1.);+#7472 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#7473 = PCURVE('',#7405,#7474); #7474 = DEFINITIONAL_REPRESENTATION('',(#7475),#7479); #7475 = LINE('',#7476,#7477);-#7476 = CARTESIAN_POINT('',(0.,0.));+#7476 = CARTESIAN_POINT('',(1.159239648963E-02,0.159073440719)); #7477 = VECTOR('',#7478,1.);-#7478 = DIRECTION('',(0.,-1.));+#7478 = DIRECTION('',(0.,1.)); #7479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7480 = ORIENTED_EDGE('',*,*,#7481,.F.);-#7481 = EDGE_CURVE('',#7378,#7454,#7482,.T.);-#7482 = SURFACE_CURVE('',#7483,(#7487,#7494),.PCURVE_S1.);-#7483 = LINE('',#7484,#7485);-#7484 = CARTESIAN_POINT('',(-0.71088812934,6.550347222222E-02,1.5450001)- );-#7485 = VECTOR('',#7486,1.);-#7486 = DIRECTION('',(0.292690370589,-0.956207271968,0.));-#7487 = PCURVE('',#7393,#7488);-#7488 = DEFINITIONAL_REPRESENTATION('',(#7489),#7493);-#7489 = LINE('',#7490,#7491);-#7490 = CARTESIAN_POINT('',(0.,0.));-#7491 = VECTOR('',#7492,1.);-#7492 = DIRECTION('',(1.,0.));-#7493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7494 = PCURVE('',#7338,#7495);-#7495 = DEFINITIONAL_REPRESENTATION('',(#7496),#7500);-#7496 = LINE('',#7497,#7498);-#7497 = CARTESIAN_POINT('',(6.1743706598E-02,0.124740668403));-#7498 = VECTOR('',#7499,1.);-#7499 = DIRECTION('',(0.292690370589,-0.956207271968));-#7500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7501 = ADVANCED_FACE('',(#7502),#7469,.F.);-#7502 = FACE_BOUND('',#7503,.F.);-#7503 = EDGE_LOOP('',(#7504,#7505,#7528,#7556));-#7504 = ORIENTED_EDGE('',*,*,#7453,.T.);-#7505 = ORIENTED_EDGE('',*,*,#7506,.T.);-#7506 = EDGE_CURVE('',#7431,#7507,#7509,.T.);-#7507 = VERTEX_POINT('',#7508);-#7508 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5050001));-#7509 = SURFACE_CURVE('',#7510,(#7514,#7521),.PCURVE_S1.);-#7510 = LINE('',#7511,#7512);-#7511 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5050001- ));-#7512 = VECTOR('',#7513,1.);-#7513 = DIRECTION('',(-1.,0.,0.));-#7514 = PCURVE('',#7469,#7515);-#7515 = DEFINITIONAL_REPRESENTATION('',(#7516),#7520);-#7516 = LINE('',#7517,#7518);-#7517 = CARTESIAN_POINT('',(0.,-4.E-02));-#7518 = VECTOR('',#7519,1.);-#7519 = DIRECTION('',(1.,0.));-#7520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7521 = PCURVE('',#7284,#7522);-#7522 = DEFINITIONAL_REPRESENTATION('',(#7523),#7527);-#7523 = LINE('',#7524,#7525);-#7524 = CARTESIAN_POINT('',(9.9926215278E-02,0.));-#7525 = VECTOR('',#7526,1.);-#7526 = DIRECTION('',(-1.,0.));-#7527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7528 = ORIENTED_EDGE('',*,*,#7529,.F.);-#7529 = EDGE_CURVE('',#7530,#7507,#7532,.T.);-#7530 = VERTEX_POINT('',#7531);-#7531 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5450001));-#7532 = SURFACE_CURVE('',#7533,(#7537,#7544),.PCURVE_S1.);-#7533 = LINE('',#7534,#7535);-#7534 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5450001));-#7535 = VECTOR('',#7536,1.);-#7536 = DIRECTION('',(-0.,-0.,-1.));-#7537 = PCURVE('',#7469,#7538);-#7538 = DEFINITIONAL_REPRESENTATION('',(#7539),#7543);-#7539 = LINE('',#7540,#7541);-#7540 = CARTESIAN_POINT('',(1.7462022569E-02,0.));-#7541 = VECTOR('',#7542,1.);-#7542 = DIRECTION('',(0.,-1.));-#7543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7544 = PCURVE('',#7545,#7550);-#7545 = PLANE('',#7546);-#7546 = AXIS2_PLACEMENT_3D('',#7547,#7548,#7549);-#7547 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5450001));-#7548 = DIRECTION('',(0.962267170904,0.272106397942,0.));-#7549 = DIRECTION('',(-0.272106397942,0.962267170904,0.));-#7550 = DEFINITIONAL_REPRESENTATION('',(#7551),#7555);-#7551 = LINE('',#7552,#7553);-#7552 = CARTESIAN_POINT('',(0.,0.));-#7553 = VECTOR('',#7554,1.);-#7554 = DIRECTION('',(0.,-1.));-#7555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7556 = ORIENTED_EDGE('',*,*,#7557,.F.);-#7557 = EDGE_CURVE('',#7454,#7530,#7558,.T.);-#7558 = SURFACE_CURVE('',#7559,(#7563,#7570),.PCURVE_S1.);+#7480 = ORIENTED_EDGE('',*,*,#7481,.T.);+#7481 = EDGE_CURVE('',#7466,#7482,#7484,.T.);+#7482 = VERTEX_POINT('',#7483);+#7483 = CARTESIAN_POINT('',(9.628129306668E-02,0.881408546428,0.955));+#7484 = SURFACE_CURVE('',#7485,(#7489),.PCURVE_S1.);+#7485 = LINE('',#7486,#7487);+#7486 = CARTESIAN_POINT('',(9.628129306668E-02,1.017039585357,0.955));+#7487 = VECTOR('',#7488,1.);+#7488 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7489 = PCURVE('',#7405,#7490);+#7490 = DEFINITIONAL_REPRESENTATION('',(#7491),#7495);+#7491 = LINE('',#7492,#7493);+#7492 = CARTESIAN_POINT('',(1.159239648963E-02,0.192304977322));+#7493 = VECTOR('',#7494,1.);+#7494 = DIRECTION('',(1.,0.));+#7495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7496 = ORIENTED_EDGE('',*,*,#7497,.T.);+#7497 = EDGE_CURVE('',#7482,#7498,#7500,.T.);+#7498 = VERTEX_POINT('',#7499);+#7499 = CARTESIAN_POINT('',(6.304975646306E-02,0.881408546428,0.955));+#7500 = SURFACE_CURVE('',#7501,(#7505),.PCURVE_S1.);+#7501 = LINE('',#7502,#7503);+#7502 = CARTESIAN_POINT('',(9.628129306668E-02,0.881408546428,0.955));+#7503 = VECTOR('',#7504,1.);+#7504 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7505 = PCURVE('',#7405,#7506);+#7506 = DEFINITIONAL_REPRESENTATION('',(#7507),#7511);+#7507 = LINE('',#7508,#7509);+#7508 = CARTESIAN_POINT('',(0.147223435418,0.192304977322));+#7509 = VECTOR('',#7510,1.);+#7510 = DIRECTION('',(0.,-1.));+#7511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7512 = ORIENTED_EDGE('',*,*,#7513,.T.);+#7513 = EDGE_CURVE('',#7498,#7395,#7514,.T.);+#7514 = SURFACE_CURVE('',#7515,(#7519),.PCURVE_S1.);+#7515 = LINE('',#7516,#7517);+#7516 = CARTESIAN_POINT('',(6.304975646306E-02,0.881408546428,0.955));+#7517 = VECTOR('',#7518,1.);+#7518 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7519 = PCURVE('',#7405,#7520);+#7520 = DEFINITIONAL_REPRESENTATION('',(#7521),#7525);+#7521 = LINE('',#7522,#7523);+#7522 = CARTESIAN_POINT('',(0.147223435418,0.159073440719));+#7523 = VECTOR('',#7524,1.);+#7524 = DIRECTION('',(-1.,0.));+#7525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7526 = SHELL_BASED_SURFACE_MODEL('',(#7527));+#7527 = OPEN_SHELL('',(#7528));+#7528 = ADVANCED_FACE('',(#7529),#7543,.T.);+#7529 = FACE_BOUND('',#7530,.F.);+#7530 = EDGE_LOOP('',(#7531,#7554,#7570,#7586,#7602,#7618,#7634,#7650,+ #7666,#7682,#7698,#7714,#7730,#7746,#7762,#7778,#7794,#7810,#7826,+ #7842,#7858));+#7531 = ORIENTED_EDGE('',*,*,#7532,.T.);+#7532 = EDGE_CURVE('',#7533,#7535,#7537,.T.);+#7533 = VERTEX_POINT('',#7534);+#7534 = CARTESIAN_POINT('',(-6.25345388413E-02,0.813915037978,0.955));+#7535 = VERTEX_POINT('',#7536);+#7536 = CARTESIAN_POINT('',(-6.25345388413E-02,0.732897066956,0.955));+#7537 = SURFACE_CURVE('',#7538,(#7542),.PCURVE_S1.);+#7538 = LINE('',#7539,#7540);+#7539 = CARTESIAN_POINT('',(-6.25345388413E-02,0.813915037978,0.955));+#7540 = VECTOR('',#7541,1.);+#7541 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7542 = PCURVE('',#7543,#7548);+#7543 = PLANE('',#7544);+#7544 = AXIS2_PLACEMENT_3D('',#7545,#7546,#7547);+#7545 = CARTESIAN_POINT('',(-9.60236842558E-02,0.869816149939,0.955));+#7546 = DIRECTION('',(0.,0.,1.));+#7547 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7548 = DEFINITIONAL_REPRESENTATION('',(#7549),#7553);+#7549 = LINE('',#7550,#7551);+#7550 = CARTESIAN_POINT('',(5.590111196112E-02,3.34891454145E-02));+#7551 = VECTOR('',#7552,1.);+#7552 = DIRECTION('',(1.,0.));+#7553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7554 = ORIENTED_EDGE('',*,*,#7555,.T.);+#7555 = EDGE_CURVE('',#7535,#7556,#7558,.T.);+#7556 = VERTEX_POINT('',#7557);+#7557 = CARTESIAN_POINT('',(-9.60236842558E-02,0.732897066956,0.955));+#7558 = SURFACE_CURVE('',#7559,(#7563),.PCURVE_S1.); #7559 = LINE('',#7560,#7561);-#7560 = CARTESIAN_POINT('',(-0.67270562066,-5.923719618056E-02,1.5450001- ));+#7560 = CARTESIAN_POINT('',(-6.25345388413E-02,0.732897066956,0.955)); #7561 = VECTOR('',#7562,1.);-#7562 = DIRECTION('',(-1.,0.,0.));-#7563 = PCURVE('',#7469,#7564);+#7562 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7563 = PCURVE('',#7543,#7564); #7564 = DEFINITIONAL_REPRESENTATION('',(#7565),#7569); #7565 = LINE('',#7566,#7567);-#7566 = CARTESIAN_POINT('',(0.,0.));+#7566 = CARTESIAN_POINT('',(0.136919082983,3.34891454145E-02)); #7567 = VECTOR('',#7568,1.);-#7568 = DIRECTION('',(1.,0.));+#7568 = DIRECTION('',(0.,-1.)); #7569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#7570 = PCURVE('',#7338,#7571);-#7571 = DEFINITIONAL_REPRESENTATION('',(#7572),#7576);-#7572 = LINE('',#7573,#7574);-#7573 = CARTESIAN_POINT('',(9.9926215278E-02,0.));-#7574 = VECTOR('',#7575,1.);-#7575 = DIRECTION('',(-1.,0.));-#7576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7577 = ADVANCED_FACE('',(#7578),#7545,.F.);-#7578 = FACE_BOUND('',#7579,.F.);-#7579 = EDGE_LOOP('',(#7580,#7581,#7604,#7632));-#7580 = ORIENTED_EDGE('',*,*,#7529,.T.);-#7581 = ORIENTED_EDGE('',*,*,#7582,.T.);-#7582 = EDGE_CURVE('',#7507,#7583,#7585,.T.);-#7583 = VERTEX_POINT('',#7584);-#7584 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5050001));-#7585 = SURFACE_CURVE('',#7586,(#7590,#7597),.PCURVE_S1.);-#7586 = LINE('',#7587,#7588);-#7587 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5050001));-#7588 = VECTOR('',#7589,1.);-#7589 = DIRECTION('',(-0.272106397942,0.962267170904,0.));-#7590 = PCURVE('',#7545,#7591);-#7591 = DEFINITIONAL_REPRESENTATION('',(#7592),#7596);-#7592 = LINE('',#7593,#7594);-#7593 = CARTESIAN_POINT('',(0.,-4.E-02));-#7594 = VECTOR('',#7595,1.);-#7595 = DIRECTION('',(1.,0.));-#7596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7597 = PCURVE('',#7284,#7598);-#7598 = DEFINITIONAL_REPRESENTATION('',(#7599),#7603);-#7599 = LINE('',#7600,#7601);-#7600 = CARTESIAN_POINT('',(8.2464192709E-02,0.));-#7601 = VECTOR('',#7602,1.);-#7602 = DIRECTION('',(-0.272106397942,0.962267170904));-#7603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7604 = ORIENTED_EDGE('',*,*,#7605,.F.);-#7605 = EDGE_CURVE('',#7606,#7583,#7608,.T.);-#7606 = VERTEX_POINT('',#7607);-#7607 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5450001));-#7608 = SURFACE_CURVE('',#7609,(#7613,#7620),.PCURVE_S1.);-#7609 = LINE('',#7610,#7611);-#7610 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5450001));-#7611 = VECTOR('',#7612,1.);-#7612 = DIRECTION('',(-0.,-0.,-1.));-#7613 = PCURVE('',#7545,#7614);-#7614 = DEFINITIONAL_REPRESENTATION('',(#7615),#7619);-#7615 = LINE('',#7616,#7617);-#7616 = CARTESIAN_POINT('',(3.377553142447E-02,0.));-#7617 = VECTOR('',#7618,1.);-#7618 = DIRECTION('',(0.,-1.));-#7619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7620 = PCURVE('',#7621,#7626);-#7621 = PLANE('',#7622);-#7622 = AXIS2_PLACEMENT_3D('',#7623,#7624,#7625);-#7623 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5450001));-#7624 = DIRECTION('',(0.,1.,0.));-#7625 = DIRECTION('',(-1.,0.,0.));-#7626 = DEFINITIONAL_REPRESENTATION('',(#7627),#7631);-#7627 = LINE('',#7628,#7629);-#7628 = CARTESIAN_POINT('',(0.,0.));-#7629 = VECTOR('',#7630,1.);-#7630 = DIRECTION('',(0.,-1.));-#7631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7632 = ORIENTED_EDGE('',*,*,#7633,.F.);-#7633 = EDGE_CURVE('',#7530,#7606,#7634,.T.);-#7634 = SURFACE_CURVE('',#7635,(#7639,#7646),.PCURVE_S1.);-#7635 = LINE('',#7636,#7637);-#7636 = CARTESIAN_POINT('',(-0.690167643229,-5.923719618056E-02,- 1.5450001));-#7637 = VECTOR('',#7638,1.);-#7638 = DIRECTION('',(-0.272106397942,0.962267170904,0.));-#7639 = PCURVE('',#7545,#7640);-#7640 = DEFINITIONAL_REPRESENTATION('',(#7641),#7645);-#7641 = LINE('',#7642,#7643);-#7642 = CARTESIAN_POINT('',(0.,0.));-#7643 = VECTOR('',#7644,1.);-#7644 = DIRECTION('',(1.,0.));-#7645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7646 = PCURVE('',#7338,#7647);-#7647 = DEFINITIONAL_REPRESENTATION('',(#7648),#7652);-#7648 = LINE('',#7649,#7650);-#7649 = CARTESIAN_POINT('',(8.2464192709E-02,0.));-#7650 = VECTOR('',#7651,1.);-#7651 = DIRECTION('',(-0.272106397942,0.962267170904));-#7652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7653 = ADVANCED_FACE('',(#7654),#7621,.F.);-#7654 = FACE_BOUND('',#7655,.F.);-#7655 = EDGE_LOOP('',(#7656,#7657,#7680,#7708));-#7656 = ORIENTED_EDGE('',*,*,#7605,.T.);-#7657 = ORIENTED_EDGE('',*,*,#7658,.T.);-#7658 = EDGE_CURVE('',#7583,#7659,#7661,.T.);-#7659 = VERTEX_POINT('',#7660);-#7660 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5050001));-#7661 = SURFACE_CURVE('',#7662,(#7666,#7673),.PCURVE_S1.);-#7662 = LINE('',#7663,#7664);-#7663 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5050001));-#7664 = VECTOR('',#7665,1.);-#7665 = DIRECTION('',(-1.,0.,0.));-#7666 = PCURVE('',#7621,#7667);-#7667 = DEFINITIONAL_REPRESENTATION('',(#7668),#7672);-#7668 = LINE('',#7669,#7670);-#7669 = CARTESIAN_POINT('',(0.,-4.E-02));-#7670 = VECTOR('',#7671,1.);-#7671 = DIRECTION('',(1.,0.));-#7672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7673 = PCURVE('',#7284,#7674);-#7674 = DEFINITIONAL_REPRESENTATION('',(#7675),#7679);-#7675 = LINE('',#7676,#7677);-#7676 = CARTESIAN_POINT('',(7.3273654514E-02,3.250108506945E-02));-#7677 = VECTOR('',#7678,1.);-#7678 = DIRECTION('',(-1.,0.));-#7679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7680 = ORIENTED_EDGE('',*,*,#7681,.F.);-#7681 = EDGE_CURVE('',#7682,#7659,#7684,.T.);-#7682 = VERTEX_POINT('',#7683);-#7683 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5450001));-#7684 = SURFACE_CURVE('',#7685,(#7689,#7696),.PCURVE_S1.);-#7685 = LINE('',#7686,#7687);-#7686 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5450001));-#7687 = VECTOR('',#7688,1.);-#7688 = DIRECTION('',(-0.,-0.,-1.));-#7689 = PCURVE('',#7621,#7690);-#7690 = DEFINITIONAL_REPRESENTATION('',(#7691),#7695);-#7691 = LINE('',#7692,#7693);-#7692 = CARTESIAN_POINT('',(4.3696831597E-02,0.));-#7693 = VECTOR('',#7694,1.);-#7694 = DIRECTION('',(0.,-1.));-#7695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7696 = PCURVE('',#7697,#7702);-#7697 = PLANE('',#7698);-#7698 = AXIS2_PLACEMENT_3D('',#7699,#7700,#7701);-#7699 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5450001));-#7700 = DIRECTION('',(-0.963553388281,0.2675161078,0.));-#7701 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));-#7702 = DEFINITIONAL_REPRESENTATION('',(#7703),#7707);-#7703 = LINE('',#7704,#7705);-#7704 = CARTESIAN_POINT('',(0.,0.));-#7705 = VECTOR('',#7706,1.);-#7706 = DIRECTION('',(0.,-1.));-#7707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7708 = ORIENTED_EDGE('',*,*,#7709,.F.);-#7709 = EDGE_CURVE('',#7606,#7682,#7710,.T.);-#7710 = SURFACE_CURVE('',#7711,(#7715,#7722),.PCURVE_S1.);-#7711 = LINE('',#7712,#7713);-#7712 = CARTESIAN_POINT('',(-0.699358181424,-2.673611111111E-02,- 1.5450001));-#7713 = VECTOR('',#7714,1.);-#7714 = DIRECTION('',(-1.,0.,0.));-#7715 = PCURVE('',#7621,#7716);-#7716 = DEFINITIONAL_REPRESENTATION('',(#7717),#7721);-#7717 = LINE('',#7718,#7719);-#7718 = CARTESIAN_POINT('',(0.,0.));-#7719 = VECTOR('',#7720,1.);-#7720 = DIRECTION('',(1.,0.));-#7721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7722 = PCURVE('',#7338,#7723);-#7723 = DEFINITIONAL_REPRESENTATION('',(#7724),#7728);-#7724 = LINE('',#7725,#7726);-#7725 = CARTESIAN_POINT('',(7.3273654514E-02,3.250108506945E-02));-#7726 = VECTOR('',#7727,1.);-#7727 = DIRECTION('',(-1.,0.));-#7728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7729 = ADVANCED_FACE('',(#7730),#7697,.F.);-#7730 = FACE_BOUND('',#7731,.F.);-#7731 = EDGE_LOOP('',(#7732,#7733,#7756,#7779));-#7732 = ORIENTED_EDGE('',*,*,#7681,.T.);-#7733 = ORIENTED_EDGE('',*,*,#7734,.T.);-#7734 = EDGE_CURVE('',#7659,#7735,#7737,.T.);-#7735 = VERTEX_POINT('',#7736);-#7736 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5050001));-#7737 = SURFACE_CURVE('',#7738,(#7742,#7749),.PCURVE_S1.);-#7738 = LINE('',#7739,#7740);-#7739 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5050001));-#7740 = VECTOR('',#7741,1.);-#7741 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));-#7742 = PCURVE('',#7697,#7743);-#7743 = DEFINITIONAL_REPRESENTATION('',(#7744),#7748);-#7744 = LINE('',#7745,#7746);-#7745 = CARTESIAN_POINT('',(-0.,-4.E-02));-#7746 = VECTOR('',#7747,1.);-#7747 = DIRECTION('',(1.,0.));-#7748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7749 = PCURVE('',#7284,#7750);-#7750 = DEFINITIONAL_REPRESENTATION('',(#7751),#7755);-#7751 = LINE('',#7752,#7753);-#7752 = CARTESIAN_POINT('',(2.9576822917E-02,3.250108506945E-02));-#7753 = VECTOR('',#7754,1.);-#7754 = DIRECTION('',(-0.2675161078,-0.963553388281));-#7755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7756 = ORIENTED_EDGE('',*,*,#7757,.F.);-#7757 = EDGE_CURVE('',#7758,#7735,#7760,.T.);-#7758 = VERTEX_POINT('',#7759);-#7759 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5450001));-#7760 = SURFACE_CURVE('',#7761,(#7765,#7772),.PCURVE_S1.);-#7761 = LINE('',#7762,#7763);-#7762 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5450001));-#7763 = VECTOR('',#7764,1.);-#7764 = DIRECTION('',(-0.,-0.,-1.));-#7765 = PCURVE('',#7697,#7766);-#7766 = DEFINITIONAL_REPRESENTATION('',(#7767),#7771);-#7767 = LINE('',#7768,#7769);-#7768 = CARTESIAN_POINT('',(3.373044552045E-02,0.));-#7769 = VECTOR('',#7770,1.);-#7770 = DIRECTION('',(0.,-1.));-#7771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7772 = PCURVE('',#7256,#7773);-#7773 = DEFINITIONAL_REPRESENTATION('',(#7774),#7778);-#7774 = LINE('',#7775,#7776);-#7775 = CARTESIAN_POINT('',(0.,0.));-#7776 = VECTOR('',#7777,1.);-#7777 = DIRECTION('',(0.,-1.));-#7778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7779 = ORIENTED_EDGE('',*,*,#7780,.F.);-#7780 = EDGE_CURVE('',#7682,#7758,#7781,.T.);-#7781 = SURFACE_CURVE('',#7782,(#7786,#7793),.PCURVE_S1.);-#7782 = LINE('',#7783,#7784);-#7783 = CARTESIAN_POINT('',(-0.743055013021,-2.673611111111E-02,- 1.5450001));-#7784 = VECTOR('',#7785,1.);-#7785 = DIRECTION('',(-0.2675161078,-0.963553388281,0.));-#7786 = PCURVE('',#7697,#7787);-#7787 = DEFINITIONAL_REPRESENTATION('',(#7788),#7792);-#7788 = LINE('',#7789,#7790);-#7789 = CARTESIAN_POINT('',(0.,0.));-#7790 = VECTOR('',#7791,1.);-#7791 = DIRECTION('',(1.,0.));-#7792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7793 = PCURVE('',#7338,#7794);-#7794 = DEFINITIONAL_REPRESENTATION('',(#7795),#7799);-#7795 = LINE('',#7796,#7797);-#7796 = CARTESIAN_POINT('',(2.9576822917E-02,3.250108506945E-02));-#7797 = VECTOR('',#7798,1.);-#7798 = DIRECTION('',(-0.2675161078,-0.963553388281));-#7799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7800 = ADVANCED_FACE('',(#7801),#7256,.F.);-#7801 = FACE_BOUND('',#7802,.F.);-#7802 = EDGE_LOOP('',(#7803,#7804,#7825,#7826));-#7803 = ORIENTED_EDGE('',*,*,#7757,.T.);-#7804 = ORIENTED_EDGE('',*,*,#7805,.T.);-#7805 = EDGE_CURVE('',#7735,#7236,#7806,.T.);-#7806 = SURFACE_CURVE('',#7807,(#7811,#7818),.PCURVE_S1.);-#7807 = LINE('',#7808,#7809);-#7808 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5050001));-#7809 = VECTOR('',#7810,1.);-#7810 = DIRECTION('',(-1.,0.,0.));-#7811 = PCURVE('',#7256,#7812);-#7812 = DEFINITIONAL_REPRESENTATION('',(#7813),#7817);-#7813 = LINE('',#7814,#7815);-#7814 = CARTESIAN_POINT('',(0.,-4.E-02));-#7815 = VECTOR('',#7816,1.);-#7816 = DIRECTION('',(1.,0.));-#7817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7818 = PCURVE('',#7284,#7819);-#7819 = DEFINITIONAL_REPRESENTATION('',(#7820),#7824);-#7820 = LINE('',#7821,#7822);-#7821 = CARTESIAN_POINT('',(2.0553385417E-02,0.));-#7822 = VECTOR('',#7823,1.);-#7823 = DIRECTION('',(-1.,0.));-#7824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7825 = ORIENTED_EDGE('',*,*,#7233,.F.);-#7826 = ORIENTED_EDGE('',*,*,#7827,.F.);-#7827 = EDGE_CURVE('',#7758,#7234,#7828,.T.);-#7828 = SURFACE_CURVE('',#7829,(#7833,#7840),.PCURVE_S1.);-#7829 = LINE('',#7830,#7831);-#7830 = CARTESIAN_POINT('',(-0.752078450521,-5.923719618056E-02,- 1.5450001));-#7831 = VECTOR('',#7832,1.);-#7832 = DIRECTION('',(-1.,0.,0.));-#7833 = PCURVE('',#7256,#7834);-#7834 = DEFINITIONAL_REPRESENTATION('',(#7835),#7839);-#7835 = LINE('',#7836,#7837);-#7836 = CARTESIAN_POINT('',(0.,0.));-#7837 = VECTOR('',#7838,1.);-#7838 = DIRECTION('',(1.,0.));-#7839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7840 = PCURVE('',#7338,#7841);-#7841 = DEFINITIONAL_REPRESENTATION('',(#7842),#7846);-#7842 = LINE('',#7843,#7844);-#7843 = CARTESIAN_POINT('',(2.0553385417E-02,0.));-#7844 = VECTOR('',#7845,1.);-#7845 = DIRECTION('',(-1.,0.));-#7846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7847 = ADVANCED_FACE('',(#7848),#7862,.F.);-#7848 = FACE_BOUND('',#7849,.F.);-#7849 = EDGE_LOOP('',(#7850,#7885,#7908,#7936));-#7850 = ORIENTED_EDGE('',*,*,#7851,.T.);-#7851 = EDGE_CURVE('',#7852,#7854,#7856,.T.);-#7852 = VERTEX_POINT('',#7853);-#7853 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5450001- ));-#7854 = VERTEX_POINT('',#7855);-#7855 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5050001- ));-#7856 = SURFACE_CURVE('',#7857,(#7861,#7873),.PCURVE_S1.);-#7857 = LINE('',#7858,#7859);-#7858 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5450001- ));-#7859 = VECTOR('',#7860,1.);-#7860 = DIRECTION('',(-0.,-0.,-1.));-#7861 = PCURVE('',#7862,#7867);-#7862 = PLANE('',#7863);-#7863 = AXIS2_PLACEMENT_3D('',#7864,#7865,#7866);-#7864 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5450001- ));-#7865 = DIRECTION('',(0.963264593497,0.268554134051,0.));-#7866 = DIRECTION('',(-0.268554134051,0.963264593497,0.));-#7867 = DEFINITIONAL_REPRESENTATION('',(#7868),#7872);-#7868 = LINE('',#7869,#7870);-#7869 = CARTESIAN_POINT('',(0.,0.));-#7870 = VECTOR('',#7871,1.);-#7871 = DIRECTION('',(0.,-1.));-#7872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7873 = PCURVE('',#7874,#7879);-#7874 = PLANE('',#7875);-#7875 = AXIS2_PLACEMENT_3D('',#7876,#7877,#7878);-#7876 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5450001));-#7877 = DIRECTION('',(0.,-1.,0.));-#7878 = DIRECTION('',(1.,0.,0.));-#7879 = DEFINITIONAL_REPRESENTATION('',(#7880),#7884);-#7880 = LINE('',#7881,#7882);-#7881 = CARTESIAN_POINT('',(3.5592447917E-02,0.));-#7882 = VECTOR('',#7883,1.);-#7883 = DIRECTION('',(0.,-1.));-#7884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7885 = ORIENTED_EDGE('',*,*,#7886,.T.);-#7886 = EDGE_CURVE('',#7854,#7887,#7889,.T.);-#7887 = VERTEX_POINT('',#7888);-#7888 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5050001- ));-#7889 = SURFACE_CURVE('',#7890,(#7894,#7901),.PCURVE_S1.);-#7890 = LINE('',#7891,#7892);-#7891 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5050001- ));-#7892 = VECTOR('',#7893,1.);-#7893 = DIRECTION('',(-0.268554134051,0.963264593497,0.));-#7894 = PCURVE('',#7862,#7895);-#7895 = DEFINITIONAL_REPRESENTATION('',(#7896),#7900);-#7896 = LINE('',#7897,#7898);-#7897 = CARTESIAN_POINT('',(0.,-4.E-02));-#7898 = VECTOR('',#7899,1.);-#7899 = DIRECTION('',(1.,0.));-#7900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7901 = PCURVE('',#7284,#7902);-#7902 = DEFINITIONAL_REPRESENTATION('',(#7903),#7907);-#7903 = LINE('',#7904,#7905);-#7904 = CARTESIAN_POINT('',(6.9263237848E-02,4.603624131945E-02));-#7905 = VECTOR('',#7906,1.);-#7906 = DIRECTION('',(-0.268554134051,0.963264593497));-#7907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7908 = ORIENTED_EDGE('',*,*,#7909,.F.);-#7909 = EDGE_CURVE('',#7910,#7887,#7912,.T.);-#7910 = VERTEX_POINT('',#7911);-#7911 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5450001- ));-#7912 = SURFACE_CURVE('',#7913,(#7917,#7924),.PCURVE_S1.);-#7913 = LINE('',#7914,#7915);-#7914 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5450001- ));-#7915 = VECTOR('',#7916,1.);-#7916 = DIRECTION('',(-0.,-0.,-1.));-#7917 = PCURVE('',#7862,#7918);-#7918 = DEFINITIONAL_REPRESENTATION('',(#7919),#7923);-#7919 = LINE('',#7920,#7921);-#7920 = CARTESIAN_POINT('',(6.626680323237E-02,0.));-#7921 = VECTOR('',#7922,1.);-#7922 = DIRECTION('',(0.,-1.));-#7923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7924 = PCURVE('',#7925,#7930);-#7925 = PLANE('',#7926);-#7926 = AXIS2_PLACEMENT_3D('',#7927,#7928,#7929);-#7927 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5450001- ));-#7928 = DIRECTION('',(-0.963264593497,0.268554134051,0.));-#7929 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));-#7930 = DEFINITIONAL_REPRESENTATION('',(#7931),#7935);-#7931 = LINE('',#7932,#7933);-#7932 = CARTESIAN_POINT('',(0.,0.));-#7933 = VECTOR('',#7934,1.);-#7934 = DIRECTION('',(0.,-1.));-#7935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7936 = ORIENTED_EDGE('',*,*,#7937,.F.);-#7937 = EDGE_CURVE('',#7852,#7910,#7938,.T.);-#7938 = SURFACE_CURVE('',#7939,(#7943,#7950),.PCURVE_S1.);-#7939 = LINE('',#7940,#7941);-#7940 = CARTESIAN_POINT('',(-0.70336859809,-1.320095486111E-02,1.5450001- ));-#7941 = VECTOR('',#7942,1.);-#7942 = DIRECTION('',(-0.268554134051,0.963264593497,0.));-#7943 = PCURVE('',#7862,#7944);-#7944 = DEFINITIONAL_REPRESENTATION('',(#7945),#7949);-#7945 = LINE('',#7946,#7947);-#7946 = CARTESIAN_POINT('',(0.,0.));-#7947 = VECTOR('',#7948,1.);-#7948 = DIRECTION('',(1.,0.));-#7949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7950 = PCURVE('',#7338,#7951);-#7951 = DEFINITIONAL_REPRESENTATION('',(#7952),#7956);-#7952 = LINE('',#7953,#7954);-#7953 = CARTESIAN_POINT('',(6.9263237848E-02,4.603624131945E-02));-#7954 = VECTOR('',#7955,1.);-#7955 = DIRECTION('',(-0.268554134051,0.963264593497));-#7956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7957 = ADVANCED_FACE('',(#7958),#7925,.F.);-#7958 = FACE_BOUND('',#7959,.F.);-#7959 = EDGE_LOOP('',(#7960,#7961,#7984,#8007));-#7960 = ORIENTED_EDGE('',*,*,#7909,.T.);-#7961 = ORIENTED_EDGE('',*,*,#7962,.T.);-#7962 = EDGE_CURVE('',#7887,#7963,#7965,.T.);-#7963 = VERTEX_POINT('',#7964);-#7964 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5050001));-#7965 = SURFACE_CURVE('',#7966,(#7970,#7977),.PCURVE_S1.);-#7966 = LINE('',#7967,#7968);-#7967 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5050001- ));-#7968 = VECTOR('',#7969,1.);-#7969 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));-#7970 = PCURVE('',#7925,#7971);-#7971 = DEFINITIONAL_REPRESENTATION('',(#7972),#7976);-#7972 = LINE('',#7973,#7974);-#7973 = CARTESIAN_POINT('',(-0.,-4.E-02));-#7974 = VECTOR('',#7975,1.);-#7975 = DIRECTION('',(1.,0.));-#7976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7977 = PCURVE('',#7284,#7978);-#7978 = DEFINITIONAL_REPRESENTATION('',(#7979),#7983);-#7979 = LINE('',#7980,#7981);-#7980 = CARTESIAN_POINT('',(5.1467013889E-02,0.109868706597));-#7981 = VECTOR('',#7982,1.);-#7982 = DIRECTION('',(-0.268554134051,-0.963264593497));-#7983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#7984 = ORIENTED_EDGE('',*,*,#7985,.F.);-#7985 = EDGE_CURVE('',#7986,#7963,#7988,.T.);-#7986 = VERTEX_POINT('',#7987);-#7987 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5450001));-#7988 = SURFACE_CURVE('',#7989,(#7993,#8000),.PCURVE_S1.);-#7989 = LINE('',#7990,#7991);-#7990 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5450001));-#7991 = VECTOR('',#7992,1.);-#7992 = DIRECTION('',(-0.,-0.,-1.));-#7993 = PCURVE('',#7925,#7994);-#7994 = DEFINITIONAL_REPRESENTATION('',(#7995),#7999);-#7995 = LINE('',#7996,#7997);-#7996 = CARTESIAN_POINT('',(6.62668032321E-02,0.));-#7997 = VECTOR('',#7998,1.);-#7998 = DIRECTION('',(0.,-1.));-#7999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8000 = PCURVE('',#7874,#8001);-#8001 = DEFINITIONAL_REPRESENTATION('',(#8002),#8006);-#8002 = LINE('',#8003,#8004);-#8003 = CARTESIAN_POINT('',(0.,0.));-#8004 = VECTOR('',#8005,1.);-#8005 = DIRECTION('',(0.,-1.));-#8006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8007 = ORIENTED_EDGE('',*,*,#8008,.F.);-#8008 = EDGE_CURVE('',#7910,#7986,#8009,.T.);-#8009 = SURFACE_CURVE('',#8010,(#8014,#8021),.PCURVE_S1.);-#8010 = LINE('',#8011,#8012);-#8011 = CARTESIAN_POINT('',(-0.721164822049,5.063151041667E-02,1.5450001- ));-#8012 = VECTOR('',#8013,1.);-#8013 = DIRECTION('',(-0.268554134051,-0.963264593497,0.));-#8014 = PCURVE('',#7925,#8015);-#8015 = DEFINITIONAL_REPRESENTATION('',(#8016),#8020);-#8016 = LINE('',#8017,#8018);-#8017 = CARTESIAN_POINT('',(0.,0.));-#8018 = VECTOR('',#8019,1.);-#8019 = DIRECTION('',(1.,0.));-#8020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8021 = PCURVE('',#7338,#8022);+#7570 = ORIENTED_EDGE('',*,*,#7571,.T.);+#7571 = EDGE_CURVE('',#7556,#7572,#7574,.T.);+#7572 = VERTEX_POINT('',#7573);+#7573 = CARTESIAN_POINT('',(-9.60236842558E-02,0.855003643313,0.955));+#7574 = SURFACE_CURVE('',#7575,(#7579),.PCURVE_S1.);+#7575 = LINE('',#7576,#7577);+#7576 = CARTESIAN_POINT('',(-9.60236842558E-02,0.732897066956,0.955));+#7577 = VECTOR('',#7578,1.);+#7578 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7579 = PCURVE('',#7543,#7580);+#7580 = DEFINITIONAL_REPRESENTATION('',(#7581),#7585);+#7581 = LINE('',#7582,#7583);+#7582 = CARTESIAN_POINT('',(0.136919082983,3.040214368768E-17));+#7583 = VECTOR('',#7584,1.);+#7584 = DIRECTION('',(-1.,0.));+#7585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7586 = ORIENTED_EDGE('',*,*,#7587,.T.);+#7587 = EDGE_CURVE('',#7572,#7588,#7590,.T.);+#7588 = VERTEX_POINT('',#7589);+#7589 = CARTESIAN_POINT('',(-6.356497408483E-02,0.855003643313,0.955));+#7590 = SURFACE_CURVE('',#7591,(#7595),.PCURVE_S1.);+#7591 = LINE('',#7592,#7593);+#7592 = CARTESIAN_POINT('',(-9.60236842558E-02,0.855003643313,0.955));+#7593 = VECTOR('',#7594,1.);+#7594 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#7595 = PCURVE('',#7543,#7596);+#7596 = DEFINITIONAL_REPRESENTATION('',(#7597),#7601);+#7597 = LINE('',#7598,#7599);+#7598 = CARTESIAN_POINT('',(1.481250662564E-02,3.28903718164E-18));+#7599 = VECTOR('',#7600,1.);+#7600 = DIRECTION('',(0.,1.));+#7601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7602 = ORIENTED_EDGE('',*,*,#7603,.T.);+#7603 = EDGE_CURVE('',#7588,#7604,#7606,.T.);+#7604 = VERTEX_POINT('',#7605);+#7605 = CARTESIAN_POINT('',(-4.166822515996E-02,0.834394938443,0.955));+#7606 = SURFACE_CURVE('',#7607,(#7611),.PCURVE_S1.);+#7607 = LINE('',#7608,#7609);+#7608 = CARTESIAN_POINT('',(-6.356497408483E-02,0.855003643313,0.955));+#7609 = VECTOR('',#7610,1.);+#7610 = DIRECTION('',(0.728199992693,-0.685364699005,0.));+#7611 = PCURVE('',#7543,#7612);+#7612 = DEFINITIONAL_REPRESENTATION('',(#7613),#7617);+#7613 = LINE('',#7614,#7615);+#7614 = CARTESIAN_POINT('',(1.481250662564E-02,3.245871017097E-02));+#7615 = VECTOR('',#7616,1.);+#7616 = DIRECTION('',(0.685364699005,0.728199992693));+#7617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7618 = ORIENTED_EDGE('',*,*,#7619,.T.);+#7619 = EDGE_CURVE('',#7604,#7620,#7622,.T.);+#7620 = VERTEX_POINT('',#7621);+#7621 = CARTESIAN_POINT('',(6.375818069299E-03,0.78982861416,0.955));+#7622 = SURFACE_CURVE('',#7623,(#7627),.PCURVE_S1.);+#7623 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7624,#7625,#7626),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7624 = CARTESIAN_POINT('',(-4.166822515996E-02,0.834394938443,0.955));+#7625 = CARTESIAN_POINT('',(-2.640490311528E-03,0.797685682892,0.955));+#7626 = CARTESIAN_POINT('',(6.375818069299E-03,0.78982861416,0.955));+#7627 = PCURVE('',#7543,#7628);+#7628 = DEFINITIONAL_REPRESENTATION('',(#7629),#7633);+#7629 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7630,#7631,#7632),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7630 = CARTESIAN_POINT('',(3.54212114961E-02,5.435545909584E-02));+#7631 = CARTESIAN_POINT('',(7.213046704661E-02,9.338319394427E-02));+#7632 = CARTESIAN_POINT('',(7.998753577847E-02,0.102399502325));+#7633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7634 = ORIENTED_EDGE('',*,*,#7635,.T.);+#7635 = EDGE_CURVE('',#7620,#7636,#7638,.T.);+#7636 = VERTEX_POINT('',#7637);+#7637 = CARTESIAN_POINT('',(2.601848989896E-02,0.775917738373,0.955));+#7638 = SURFACE_CURVE('',#7639,(#7643),.PCURVE_S1.);+#7639 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7640,#7641,#7642),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7640 = CARTESIAN_POINT('',(6.375818069299E-03,0.78982861416,0.955));+#7641 = CARTESIAN_POINT('',(1.745299693717E-02,0.780168283752,0.955));+#7642 = CARTESIAN_POINT('',(2.601848989896E-02,0.775917738373,0.955));+#7643 = PCURVE('',#7543,#7644);+#7644 = DEFINITIONAL_REPRESENTATION('',(#7645),#7649);+#7645 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7646,#7647,#7648),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7646 = CARTESIAN_POINT('',(7.998753577847E-02,0.102399502325));+#7647 = CARTESIAN_POINT('',(8.96478661865E-02,0.113476681193));+#7648 = CARTESIAN_POINT('',(9.389841156603E-02,0.122042174155));+#7649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7650 = ORIENTED_EDGE('',*,*,#7651,.T.);+#7651 = EDGE_CURVE('',#7636,#7652,#7654,.T.);+#7652 = VERTEX_POINT('',#7653);+#7653 = CARTESIAN_POINT('',(4.295626921437E-02,0.771667192993,0.955));+#7654 = SURFACE_CURVE('',#7655,(#7659),.PCURVE_S1.);+#7655 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7656,#7657,#7658),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7656 = CARTESIAN_POINT('',(2.601848989896E-02,0.775917738373,0.955));+#7657 = CARTESIAN_POINT('',(3.458398286074E-02,0.771667192993,0.955));+#7658 = CARTESIAN_POINT('',(4.295626921437E-02,0.771667192993,0.955));+#7659 = PCURVE('',#7543,#7660);+#7660 = DEFINITIONAL_REPRESENTATION('',(#7661),#7665);+#7661 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7662,#7663,#7664),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7662 = CARTESIAN_POINT('',(9.389841156603E-02,0.122042174155));+#7663 = CARTESIAN_POINT('',(9.814895694557E-02,0.130607667117));+#7664 = CARTESIAN_POINT('',(9.814895694557E-02,0.13897995347));+#7665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7666 = ORIENTED_EDGE('',*,*,#7667,.T.);+#7667 = EDGE_CURVE('',#7652,#7668,#7670,.T.);+#7668 = VERTEX_POINT('',#7669);+#7669 = CARTESIAN_POINT('',(6.28565498549E-02,0.779459859522,0.955));+#7670 = SURFACE_CURVE('',#7671,(#7675),.PCURVE_S1.);+#7671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7672,#7673,#7674),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7672 = CARTESIAN_POINT('',(4.295626921437E-02,0.771667192993,0.955));+#7673 = CARTESIAN_POINT('',(5.58367097584E-02,0.771667192993,0.955));+#7674 = CARTESIAN_POINT('',(6.28565498549E-02,0.779459859522,0.955));+#7675 = PCURVE('',#7543,#7676);+#7676 = DEFINITIONAL_REPRESENTATION('',(#7677),#7681);+#7677 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7678,#7679,#7680),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7678 = CARTESIAN_POINT('',(9.814895694557E-02,0.13897995347));+#7679 = CARTESIAN_POINT('',(9.814895694557E-02,0.151860394014));+#7680 = CARTESIAN_POINT('',(9.035629041642E-02,0.158880234111));+#7681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7682 = ORIENTED_EDGE('',*,*,#7683,.T.);+#7683 = EDGE_CURVE('',#7668,#7684,#7686,.T.);+#7684 = VERTEX_POINT('',#7685);+#7685 = CARTESIAN_POINT('',(6.98763899514E-02,0.801549815055,0.955));+#7686 = SURFACE_CURVE('',#7687,(#7691),.PCURVE_S1.);+#7687 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7688,#7689,#7690),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7688 = CARTESIAN_POINT('',(6.28565498549E-02,0.779459859522,0.955));+#7689 = CARTESIAN_POINT('',(6.98763899514E-02,0.787252526052,0.955));+#7690 = CARTESIAN_POINT('',(6.98763899514E-02,0.801549815055,0.955));+#7691 = PCURVE('',#7543,#7692);+#7692 = DEFINITIONAL_REPRESENTATION('',(#7693),#7697);+#7693 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7694,#7695,#7696),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7694 = CARTESIAN_POINT('',(9.035629041642E-02,0.158880234111));+#7695 = CARTESIAN_POINT('',(8.256362388728E-02,0.165900074207));+#7696 = CARTESIAN_POINT('',(6.82663348834E-02,0.165900074207));+#7697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7698 = ORIENTED_EDGE('',*,*,#7699,.T.);+#7699 = EDGE_CURVE('',#7684,#7700,#7702,.T.);+#7700 = VERTEX_POINT('',#7701);+#7701 = CARTESIAN_POINT('',(6.581905118003E-02,0.824412597021,0.955));+#7702 = SURFACE_CURVE('',#7703,(#7707),.PCURVE_S1.);+#7703 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7704,#7705,#7706),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7704 = CARTESIAN_POINT('',(6.98763899514E-02,0.801549815055,0.955));+#7705 = CARTESIAN_POINT('',(6.98763899514E-02,0.811725363085,0.955));+#7706 = CARTESIAN_POINT('',(6.581905118003E-02,0.824412597021,0.955));+#7707 = PCURVE('',#7543,#7708);+#7708 = DEFINITIONAL_REPRESENTATION('',(#7709),#7713);+#7709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7710,#7711,#7712),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7710 = CARTESIAN_POINT('',(6.82663348834E-02,0.165900074207));+#7711 = CARTESIAN_POINT('',(5.809078685361E-02,0.165900074207));+#7712 = CARTESIAN_POINT('',(4.540355291773E-02,0.161842735436));+#7713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7714 = ORIENTED_EDGE('',*,*,#7715,.T.);+#7715 = EDGE_CURVE('',#7700,#7716,#7718,.T.);+#7716 = VERTEX_POINT('',#7717);+#7717 = CARTESIAN_POINT('',(5.403344808224E-02,0.850881902339,0.955));+#7718 = SURFACE_CURVE('',#7719,(#7723),.PCURVE_S1.);+#7719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7720,#7721,#7722),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7720 = CARTESIAN_POINT('',(6.581905118003E-02,0.824412597021,0.955));+#7721 = CARTESIAN_POINT('',(6.176171240866E-02,0.837099830957,0.955));+#7722 = CARTESIAN_POINT('',(5.403344808224E-02,0.850881902339,0.955));+#7723 = PCURVE('',#7543,#7724);+#7724 = DEFINITIONAL_REPRESENTATION('',(#7725),#7729);+#7725 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7726,#7727,#7728),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7726 = CARTESIAN_POINT('',(4.540355291773E-02,0.161842735436));+#7727 = CARTESIAN_POINT('',(3.271631898186E-02,0.157785396664));+#7728 = CARTESIAN_POINT('',(1.893424759974E-02,0.150057132338));+#7729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7730 = ORIENTED_EDGE('',*,*,#7731,.T.);+#7731 = EDGE_CURVE('',#7716,#7732,#7734,.T.);+#7732 = VERTEX_POINT('',#7733);+#7733 = CARTESIAN_POINT('',(8.945465957834E-02,0.850881902339,0.955));+#7734 = SURFACE_CURVE('',#7735,(#7739),.PCURVE_S1.);+#7735 = LINE('',#7736,#7737);+#7736 = CARTESIAN_POINT('',(5.403344808224E-02,0.850881902339,0.955));+#7737 = VECTOR('',#7738,1.);+#7738 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#7739 = PCURVE('',#7543,#7740);+#7740 = DEFINITIONAL_REPRESENTATION('',(#7741),#7745);+#7741 = LINE('',#7742,#7743);+#7742 = CARTESIAN_POINT('',(1.893424759974E-02,0.150057132338));+#7743 = VECTOR('',#7744,1.);+#7744 = DIRECTION('',(0.,1.));+#7745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7746 = ORIENTED_EDGE('',*,*,#7747,.T.);+#7747 = EDGE_CURVE('',#7732,#7748,#7750,.T.);+#7748 = VERTEX_POINT('',#7749);+#7749 = CARTESIAN_POINT('',(9.711852170204E-02,0.823897379399,0.955));+#7750 = SURFACE_CURVE('',#7751,(#7755),.PCURVE_S1.);+#7751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7752,#7753,#7754),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7752 = CARTESIAN_POINT('',(8.945465957834E-02,0.850881902339,0.955));+#7753 = CARTESIAN_POINT('',(9.447803139052E-02,0.837099830957,0.955));+#7754 = CARTESIAN_POINT('',(9.711852170204E-02,0.823897379399,0.955));+#7755 = PCURVE('',#7543,#7756);+#7756 = DEFINITIONAL_REPRESENTATION('',(#7757),#7761);+#7757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7758,#7759,#7760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7758 = CARTESIAN_POINT('',(1.893424759974E-02,0.185478343834));+#7759 = CARTESIAN_POINT('',(3.271631898186E-02,0.190501715646));+#7760 = CARTESIAN_POINT('',(4.591877053949E-02,0.193142205958));+#7761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7762 = ORIENTED_EDGE('',*,*,#7763,.T.);+#7763 = EDGE_CURVE('',#7748,#7764,#7766,.T.);+#7764 = VERTEX_POINT('',#7765);+#7765 = CARTESIAN_POINT('',(9.975901201357E-02,0.79858731373,0.955));+#7766 = SURFACE_CURVE('',#7767,(#7771),.PCURVE_S1.);+#7767 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7768,#7769,#7770),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7768 = CARTESIAN_POINT('',(9.711852170204E-02,0.823897379399,0.955));+#7769 = CARTESIAN_POINT('',(9.975901201357E-02,0.810694927842,0.955));+#7770 = CARTESIAN_POINT('',(9.975901201357E-02,0.79858731373,0.955));+#7771 = PCURVE('',#7543,#7772);+#7772 = DEFINITIONAL_REPRESENTATION('',(#7773),#7777);+#7773 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7774,#7775,#7776),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7774 = CARTESIAN_POINT('',(4.591877053949E-02,0.193142205958));+#7775 = CARTESIAN_POINT('',(5.912122209713E-02,0.195782696269));+#7776 = CARTESIAN_POINT('',(7.122883620853E-02,0.195782696269));+#7777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7778 = ORIENTED_EDGE('',*,*,#7779,.T.);+#7779 = EDGE_CURVE('',#7764,#7780,#7782,.T.);+#7780 = VERTEX_POINT('',#7781);+#7781 = CARTESIAN_POINT('',(8.552612521241E-02,0.750607672704,0.955));+#7782 = SURFACE_CURVE('',#7783,(#7787),.PCURVE_S1.);+#7783 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7784,#7785,#7786),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7784 = CARTESIAN_POINT('',(9.975901201357E-02,0.79858731373,0.955));+#7785 = CARTESIAN_POINT('',(9.975901201357E-02,0.768060669641,0.955));+#7786 = CARTESIAN_POINT('',(8.552612521241E-02,0.750607672704,0.955));+#7787 = PCURVE('',#7543,#7788);+#7788 = DEFINITIONAL_REPRESENTATION('',(#7789),#7793);+#7789 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7790,#7791,#7792),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7790 = CARTESIAN_POINT('',(7.122883620853E-02,0.195782696269));+#7791 = CARTESIAN_POINT('',(0.101755480298,0.195782696269));+#7792 = CARTESIAN_POINT('',(0.119208477235,0.181549809468));+#7793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7794 = ORIENTED_EDGE('',*,*,#7795,.T.);+#7795 = EDGE_CURVE('',#7780,#7796,#7798,.T.);+#7796 = VERTEX_POINT('',#7797);+#7797 = CARTESIAN_POINT('',(4.669159697214E-02,0.733154675767,0.955));+#7798 = SURFACE_CURVE('',#7799,(#7803),.PCURVE_S1.);+#7799 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7800,#7801,#7802),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7800 = CARTESIAN_POINT('',(8.552612521241E-02,0.750607672704,0.955));+#7801 = CARTESIAN_POINT('',(7.129323841125E-02,0.733154675767,0.955));+#7802 = CARTESIAN_POINT('',(4.669159697214E-02,0.733154675767,0.955));+#7803 = PCURVE('',#7543,#7804);+#7804 = DEFINITIONAL_REPRESENTATION('',(#7805),#7809);+#7805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7806,#7807,#7808),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7806 = CARTESIAN_POINT('',(0.119208477235,0.181549809468));+#7807 = CARTESIAN_POINT('',(0.136661474172,0.167316922667));+#7808 = CARTESIAN_POINT('',(0.136661474172,0.142715281228));+#7809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7810 = ORIENTED_EDGE('',*,*,#7811,.T.);+#7811 = EDGE_CURVE('',#7796,#7812,#7814,.T.);+#7812 = VERTEX_POINT('',#7813);+#7813 = CARTESIAN_POINT('',(2.543887007447E-02,0.736954405727,0.955));+#7814 = SURFACE_CURVE('',#7815,(#7819),.PCURVE_S1.);+#7815 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7816,#7817,#7818),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7816 = CARTESIAN_POINT('',(4.669159697214E-02,0.733154675767,0.955));+#7817 = CARTESIAN_POINT('',(3.535680929338E-02,0.733154675767,0.955));+#7818 = CARTESIAN_POINT('',(2.543887007447E-02,0.736954405727,0.955));+#7819 = PCURVE('',#7543,#7820);+#7820 = DEFINITIONAL_REPRESENTATION('',(#7821),#7825);+#7821 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7822,#7823,#7824),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7822 = CARTESIAN_POINT('',(0.136661474172,0.142715281228));+#7823 = CARTESIAN_POINT('',(0.136661474172,0.131380493549));+#7824 = CARTESIAN_POINT('',(0.132861744212,0.12146255433));+#7825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7826 = ORIENTED_EDGE('',*,*,#7827,.T.);+#7827 = EDGE_CURVE('',#7812,#7828,#7830,.T.);+#7828 = VERTEX_POINT('',#7829);+#7829 = CARTESIAN_POINT('',(3.41331674417E-03,0.750028052879,0.955));+#7830 = SURFACE_CURVE('',#7831,(#7835),.PCURVE_S1.);+#7831 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7832,#7833,#7834),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7832 = CARTESIAN_POINT('',(2.543887007447E-02,0.736954405727,0.955));+#7833 = CARTESIAN_POINT('',(1.552093085557E-02,0.740754135688,0.955));+#7834 = CARTESIAN_POINT('',(3.41331674417E-03,0.750028052879,0.955));+#7835 = PCURVE('',#7543,#7836);+#7836 = DEFINITIONAL_REPRESENTATION('',(#7837),#7841);+#7837 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7838,#7839,#7840),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7838 = CARTESIAN_POINT('',(0.132861744212,0.12146255433));+#7839 = CARTESIAN_POINT('',(0.129062014251,0.111544615111));+#7840 = CARTESIAN_POINT('',(0.11978809706,9.943700099997E-02));+#7841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7842 = ORIENTED_EDGE('',*,*,#7843,.T.);+#7843 = EDGE_CURVE('',#7828,#7844,#7846,.T.);+#7844 = VERTEX_POINT('',#7845);+#7845 = CARTESIAN_POINT('',(-3.600083132059E-02,0.787510134862,0.955));+#7846 = SURFACE_CURVE('',#7847,(#7851),.PCURVE_S1.);+#7847 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7848,#7849,#7850),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7848 = CARTESIAN_POINT('',(3.41331674417E-03,0.750028052879,0.955));+#7849 = CARTESIAN_POINT('',(-5.345382825775E-03,0.756854686368,0.955));+#7850 = CARTESIAN_POINT('',(-3.600083132059E-02,0.787510134862,0.955));+#7851 = PCURVE('',#7543,#7852);+#7852 = DEFINITIONAL_REPRESENTATION('',(#7853),#7857);+#7853 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7854,#7855,#7856),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7854 = CARTESIAN_POINT('',(0.11978809706,9.943700099997E-02));+#7855 = CARTESIAN_POINT('',(0.112961463571,9.067830143002E-02));+#7856 = CARTESIAN_POINT('',(8.23060150764E-02,6.002285293522E-02));+#7857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7858 = ORIENTED_EDGE('',*,*,#7859,.T.);+#7859 = EDGE_CURVE('',#7844,#7533,#7860,.T.);+#7860 = SURFACE_CURVE('',#7861,(#7865),.PCURVE_S1.);+#7861 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7862,#7863,#7864),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7862 = CARTESIAN_POINT('',(-3.600083132059E-02,0.787510134862,0.955));+#7863 = CARTESIAN_POINT('',(-5.261659962239E-02,0.804125903164,0.955));+#7864 = CARTESIAN_POINT('',(-6.25345388413E-02,0.813915037978,0.955));+#7865 = PCURVE('',#7543,#7866);+#7866 = DEFINITIONAL_REPRESENTATION('',(#7867),#7871);+#7867 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7868,#7869,#7870),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7868 = CARTESIAN_POINT('',(8.23060150764E-02,6.002285293522E-02));+#7869 = CARTESIAN_POINT('',(6.569024677459E-02,4.340708463341E-02));+#7870 = CARTESIAN_POINT('',(5.590111196112E-02,3.34891454145E-02));+#7871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7872 = SHELL_BASED_SURFACE_MODEL('',(#7873));+#7873 = OPEN_SHELL('',(#7874));+#7874 = ADVANCED_FACE('',(#7875,#8058),#7889,.T.);+#7875 = FACE_BOUND('',#7876,.F.);+#7876 = EDGE_LOOP('',(#7877,#7900,#7916,#7932,#7948,#7964,#7980,#7996,+ #8012,#8028,#8044));+#7877 = ORIENTED_EDGE('',*,*,#7878,.T.);+#7878 = EDGE_CURVE('',#7879,#7881,#7883,.T.);+#7879 = VERTEX_POINT('',#7880);+#7880 = CARTESIAN_POINT('',(-1.771060574805E-02,0.697862268676,0.955));+#7881 = VERTEX_POINT('',#7882);+#7882 = CARTESIAN_POINT('',(9.628129306668E-02,0.624958975197,0.955));+#7883 = SURFACE_CURVE('',#7884,(#7888),.PCURVE_S1.);+#7884 = LINE('',#7885,#7886);+#7885 = CARTESIAN_POINT('',(-1.771060574805E-02,0.697862268676,0.955));+#7886 = VECTOR('',#7887,1.);+#7887 = DIRECTION('',(0.842444236237,-0.538783545435,0.));+#7888 = PCURVE('',#7889,#7894);+#7889 = PLANE('',#7890);+#7890 = AXIS2_PLACEMENT_3D('',#7891,#7892,#7893);+#7891 = CARTESIAN_POINT('',(-9.60236842558E-02,0.711000318031,0.955));+#7892 = DIRECTION('',(0.,0.,1.));+#7893 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7894 = DEFINITIONAL_REPRESENTATION('',(#7895),#7899);+#7895 = LINE('',#7896,#7897);+#7896 = CARTESIAN_POINT('',(1.313804935492E-02,7.831307850775E-02));+#7897 = VECTOR('',#7898,1.);+#7898 = DIRECTION('',(0.538783545435,0.842444236237));+#7899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7900 = ORIENTED_EDGE('',*,*,#7901,.T.);+#7901 = EDGE_CURVE('',#7881,#7902,#7904,.T.);+#7902 = VERTEX_POINT('',#7903);+#7903 = CARTESIAN_POINT('',(9.628129306668E-02,0.585158413916,0.955));+#7904 = SURFACE_CURVE('',#7905,(#7909),.PCURVE_S1.);+#7905 = LINE('',#7906,#7907);+#7906 = CARTESIAN_POINT('',(9.628129306668E-02,0.624958975197,0.955));+#7907 = VECTOR('',#7908,1.);+#7908 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7909 = PCURVE('',#7889,#7910);+#7910 = DEFINITIONAL_REPRESENTATION('',(#7911),#7915);+#7911 = LINE('',#7912,#7913);+#7912 = CARTESIAN_POINT('',(8.604134283417E-02,0.192304977322));+#7913 = VECTOR('',#7914,1.);+#7914 = DIRECTION('',(1.,0.));+#7915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7916 = ORIENTED_EDGE('',*,*,#7917,.T.);+#7917 = EDGE_CURVE('',#7902,#7918,#7920,.T.);+#7918 = VERTEX_POINT('',#7919);+#7919 = CARTESIAN_POINT('',(-2.196115112758E-02,0.585158413916,0.955));+#7920 = SURFACE_CURVE('',#7921,(#7925),.PCURVE_S1.);+#7921 = LINE('',#7922,#7923);+#7922 = CARTESIAN_POINT('',(9.628129306668E-02,0.585158413916,0.955));+#7923 = VECTOR('',#7924,1.);+#7924 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7925 = PCURVE('',#7889,#7926);+#7926 = DEFINITIONAL_REPRESENTATION('',(#7927),#7931);+#7927 = LINE('',#7928,#7929);+#7928 = CARTESIAN_POINT('',(0.125841904115,0.192304977322));+#7929 = VECTOR('',#7930,1.);+#7930 = DIRECTION('',(0.,-1.));+#7931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7932 = ORIENTED_EDGE('',*,*,#7933,.T.);+#7933 = EDGE_CURVE('',#7918,#7934,#7936,.T.);+#7934 = VERTEX_POINT('',#7935);+#7935 = CARTESIAN_POINT('',(-2.196115112758E-02,0.564034491423,0.955));+#7936 = SURFACE_CURVE('',#7937,(#7941),.PCURVE_S1.);+#7937 = LINE('',#7938,#7939);+#7938 = CARTESIAN_POINT('',(-2.196115112758E-02,0.585158413916,0.955));+#7939 = VECTOR('',#7940,1.);+#7940 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#7941 = PCURVE('',#7889,#7942);+#7942 = DEFINITIONAL_REPRESENTATION('',(#7943),#7947);+#7943 = LINE('',#7944,#7945);+#7944 = CARTESIAN_POINT('',(0.125841904115,7.406253312822E-02));+#7945 = VECTOR('',#7946,1.);+#7946 = DIRECTION('',(1.,0.));+#7947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7948 = ORIENTED_EDGE('',*,*,#7949,.T.);+#7949 = EDGE_CURVE('',#7934,#7950,#7952,.T.);+#7950 = VERTEX_POINT('',#7951);+#7951 = CARTESIAN_POINT('',(-5.4548665704E-02,0.564034491423,0.955));+#7952 = SURFACE_CURVE('',#7953,(#7957),.PCURVE_S1.);+#7953 = LINE('',#7954,#7955);+#7954 = CARTESIAN_POINT('',(-2.196115112758E-02,0.564034491423,0.955));+#7955 = VECTOR('',#7956,1.);+#7956 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7957 = PCURVE('',#7889,#7958);+#7958 = DEFINITIONAL_REPRESENTATION('',(#7959),#7963);+#7959 = LINE('',#7960,#7961);+#7960 = CARTESIAN_POINT('',(0.146965826607,7.406253312822E-02));+#7961 = VECTOR('',#7962,1.);+#7962 = DIRECTION('',(0.,-1.));+#7963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7964 = ORIENTED_EDGE('',*,*,#7965,.T.);+#7965 = EDGE_CURVE('',#7950,#7966,#7968,.T.);+#7966 = VERTEX_POINT('',#7967);+#7967 = CARTESIAN_POINT('',(-5.4548665704E-02,0.585158413916,0.955));+#7968 = SURFACE_CURVE('',#7969,(#7973),.PCURVE_S1.);+#7969 = LINE('',#7970,#7971);+#7970 = CARTESIAN_POINT('',(-5.4548665704E-02,0.564034491423,0.955));+#7971 = VECTOR('',#7972,1.);+#7972 = DIRECTION('',(2.22044604925E-16,1.,0.));+#7973 = PCURVE('',#7889,#7974);+#7974 = DEFINITIONAL_REPRESENTATION('',(#7975),#7979);+#7975 = LINE('',#7976,#7977);+#7976 = CARTESIAN_POINT('',(0.146965826607,4.14750185518E-02));+#7977 = VECTOR('',#7978,1.);+#7978 = DIRECTION('',(-1.,0.));+#7979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7980 = ORIENTED_EDGE('',*,*,#7981,.T.);+#7981 = EDGE_CURVE('',#7966,#7982,#7984,.T.);+#7982 = VERTEX_POINT('',#7983);+#7983 = CARTESIAN_POINT('',(-9.60236842558E-02,0.585158413916,0.955));+#7984 = SURFACE_CURVE('',#7985,(#7989),.PCURVE_S1.);+#7985 = LINE('',#7986,#7987);+#7986 = CARTESIAN_POINT('',(-5.4548665704E-02,0.585158413916,0.955));+#7987 = VECTOR('',#7988,1.);+#7988 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#7989 = PCURVE('',#7889,#7990);+#7990 = DEFINITIONAL_REPRESENTATION('',(#7991),#7995);+#7991 = LINE('',#7992,#7993);+#7992 = CARTESIAN_POINT('',(0.125841904115,4.14750185518E-02));+#7993 = VECTOR('',#7994,1.);+#7994 = DIRECTION('',(0.,-1.));+#7995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7996 = ORIENTED_EDGE('',*,*,#7997,.T.);+#7997 = EDGE_CURVE('',#7982,#7998,#8000,.T.);+#7998 = VERTEX_POINT('',#7999);+#7999 = CARTESIAN_POINT('',(-9.60236842558E-02,0.621610060655,0.955));+#8000 = SURFACE_CURVE('',#8001,(#8005),.PCURVE_S1.);+#8001 = LINE('',#8002,#8003);+#8002 = CARTESIAN_POINT('',(-9.60236842558E-02,0.585158413916,0.955));+#8003 = VECTOR('',#8004,1.);+#8004 = DIRECTION('',(2.22044604925E-16,1.,0.));+#8005 = PCURVE('',#7889,#8006);+#8006 = DEFINITIONAL_REPRESENTATION('',(#8007),#8011);+#8007 = LINE('',#8008,#8009);+#8008 = CARTESIAN_POINT('',(0.125841904115,-1.941020890427E-16));+#8009 = VECTOR('',#8010,1.);+#8010 = DIRECTION('',(-1.,0.));+#8011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8012 = ORIENTED_EDGE('',*,*,#8013,.T.);+#8013 = EDGE_CURVE('',#7998,#8014,#8016,.T.);+#8014 = VERTEX_POINT('',#8015);+#8015 = CARTESIAN_POINT('',(-5.4548665704E-02,0.621610060655,0.955));+#8016 = SURFACE_CURVE('',#8017,(#8021),.PCURVE_S1.);+#8017 = LINE('',#8018,#8019);+#8018 = CARTESIAN_POINT('',(-9.60236842558E-02,0.621610060655,0.955));+#8019 = VECTOR('',#8020,1.);+#8020 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#8021 = PCURVE('',#7889,#8022); #8022 = DEFINITIONAL_REPRESENTATION('',(#8023),#8027); #8023 = LINE('',#8024,#8025);-#8024 = CARTESIAN_POINT('',(5.1467013889E-02,0.109868706597));+#8024 = CARTESIAN_POINT('',(8.939025737562E-02,1.984862438312E-17)); #8025 = VECTOR('',#8026,1.);-#8026 = DIRECTION('',(-0.268554134051,-0.963264593497));+#8026 = DIRECTION('',(0.,1.)); #8027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8028 = ADVANCED_FACE('',(#8029),#7874,.F.);-#8029 = FACE_BOUND('',#8030,.F.);-#8030 = EDGE_LOOP('',(#8031,#8032,#8053,#8054));-#8031 = ORIENTED_EDGE('',*,*,#7985,.T.);-#8032 = ORIENTED_EDGE('',*,*,#8033,.T.);-#8033 = EDGE_CURVE('',#7963,#7854,#8034,.T.);-#8034 = SURFACE_CURVE('',#8035,(#8039,#8046),.PCURVE_S1.);-#8035 = LINE('',#8036,#8037);-#8036 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5050001));-#8037 = VECTOR('',#8038,1.);-#8038 = DIRECTION('',(1.,0.,0.));-#8039 = PCURVE('',#7874,#8040);-#8040 = DEFINITIONAL_REPRESENTATION('',(#8041),#8045);-#8041 = LINE('',#8042,#8043);-#8042 = CARTESIAN_POINT('',(0.,-4.E-02));-#8043 = VECTOR('',#8044,1.);-#8044 = DIRECTION('',(1.,0.));-#8045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8046 = PCURVE('',#7284,#8047);-#8047 = DEFINITIONAL_REPRESENTATION('',(#8048),#8052);-#8048 = LINE('',#8049,#8050);-#8049 = CARTESIAN_POINT('',(3.3670789931E-02,4.603624131945E-02));-#8050 = VECTOR('',#8051,1.);-#8051 = DIRECTION('',(1.,0.));-#8052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8053 = ORIENTED_EDGE('',*,*,#7851,.F.);-#8054 = ORIENTED_EDGE('',*,*,#8055,.F.);-#8055 = EDGE_CURVE('',#7986,#7852,#8056,.T.);-#8056 = SURFACE_CURVE('',#8057,(#8061,#8068),.PCURVE_S1.);-#8057 = LINE('',#8058,#8059);-#8058 = CARTESIAN_POINT('',(-0.738961046007,-1.320095486111E-02,- 1.5450001));-#8059 = VECTOR('',#8060,1.);-#8060 = DIRECTION('',(1.,0.,0.));-#8061 = PCURVE('',#7874,#8062);-#8062 = DEFINITIONAL_REPRESENTATION('',(#8063),#8067);-#8063 = LINE('',#8064,#8065);-#8064 = CARTESIAN_POINT('',(0.,0.));-#8065 = VECTOR('',#8066,1.);-#8066 = DIRECTION('',(1.,0.));-#8067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8068 = PCURVE('',#7338,#8069);-#8069 = DEFINITIONAL_REPRESENTATION('',(#8070),#8074);-#8070 = LINE('',#8071,#8072);-#8071 = CARTESIAN_POINT('',(3.3670789931E-02,4.603624131945E-02));-#8072 = VECTOR('',#8073,1.);-#8073 = DIRECTION('',(1.,0.));-#8074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8075 = ADVANCED_FACE('',(#8076,#8086),#7338,.T.);-#8076 = FACE_BOUND('',#8077,.F.);-#8077 = EDGE_LOOP('',(#8078,#8079,#8080,#8081,#8082,#8083,#8084,#8085));-#8078 = ORIENTED_EDGE('',*,*,#7324,.T.);-#8079 = ORIENTED_EDGE('',*,*,#7405,.T.);-#8080 = ORIENTED_EDGE('',*,*,#7481,.T.);-#8081 = ORIENTED_EDGE('',*,*,#7557,.T.);-#8082 = ORIENTED_EDGE('',*,*,#7633,.T.);-#8083 = ORIENTED_EDGE('',*,*,#7709,.T.);-#8084 = ORIENTED_EDGE('',*,*,#7780,.T.);-#8085 = ORIENTED_EDGE('',*,*,#7827,.T.);-#8086 = FACE_BOUND('',#8087,.F.);-#8087 = EDGE_LOOP('',(#8088,#8089,#8090));-#8088 = ORIENTED_EDGE('',*,*,#7937,.T.);-#8089 = ORIENTED_EDGE('',*,*,#8008,.T.);-#8090 = ORIENTED_EDGE('',*,*,#8055,.T.);-#8091 = ADVANCED_FACE('',(#8092,#8102),#7284,.F.);-#8092 = FACE_BOUND('',#8093,.T.);-#8093 = EDGE_LOOP('',(#8094,#8095,#8096,#8097,#8098,#8099,#8100,#8101));-#8094 = ORIENTED_EDGE('',*,*,#7268,.T.);-#8095 = ORIENTED_EDGE('',*,*,#7354,.T.);-#8096 = ORIENTED_EDGE('',*,*,#7430,.T.);-#8097 = ORIENTED_EDGE('',*,*,#7506,.T.);-#8098 = ORIENTED_EDGE('',*,*,#7582,.T.);-#8099 = ORIENTED_EDGE('',*,*,#7658,.T.);-#8100 = ORIENTED_EDGE('',*,*,#7734,.T.);-#8101 = ORIENTED_EDGE('',*,*,#7805,.T.);-#8102 = FACE_BOUND('',#8103,.T.);-#8103 = EDGE_LOOP('',(#8104,#8105,#8106));-#8104 = ORIENTED_EDGE('',*,*,#7886,.T.);-#8105 = ORIENTED_EDGE('',*,*,#7962,.T.);-#8106 = ORIENTED_EDGE('',*,*,#8033,.T.);-#8107 = MANIFOLD_SOLID_BREP('',#8108);-#8108 = CLOSED_SHELL('',(#8109,#8229,#8305,#8381,#8457,#8533,#8609,#8680- ,#8727,#8738));-#8109 = ADVANCED_FACE('',(#8110),#8124,.F.);-#8110 = FACE_BOUND('',#8111,.F.);-#8111 = EDGE_LOOP('',(#8112,#8147,#8175,#8203));-#8112 = ORIENTED_EDGE('',*,*,#8113,.T.);-#8113 = EDGE_CURVE('',#8114,#8116,#8118,.T.);-#8114 = VERTEX_POINT('',#8115);-#8115 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5450001- ));-#8116 = VERTEX_POINT('',#8117);-#8117 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5050001- ));-#8118 = SURFACE_CURVE('',#8119,(#8123,#8135),.PCURVE_S1.);-#8119 = LINE('',#8120,#8121);-#8120 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5450001- ));-#8121 = VECTOR('',#8122,1.);-#8122 = DIRECTION('',(-0.,-0.,-1.));-#8123 = PCURVE('',#8124,#8129);-#8124 = PLANE('',#8125);-#8125 = AXIS2_PLACEMENT_3D('',#8126,#8127,#8128);-#8126 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5450001- ));-#8127 = DIRECTION('',(1.,0.,0.));-#8128 = DIRECTION('',(-0.,1.,0.));-#8129 = DEFINITIONAL_REPRESENTATION('',(#8130),#8134);-#8130 = LINE('',#8131,#8132);-#8131 = CARTESIAN_POINT('',(0.,0.));-#8132 = VECTOR('',#8133,1.);-#8133 = DIRECTION('',(0.,-1.));-#8134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8135 = PCURVE('',#8136,#8141);-#8136 = PLANE('',#8137);-#8137 = AXIS2_PLACEMENT_3D('',#8138,#8139,#8140);-#8138 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5450001- ));-#8139 = DIRECTION('',(0.,1.,0.));-#8140 = DIRECTION('',(-1.,0.,0.));-#8141 = DEFINITIONAL_REPRESENTATION('',(#8142),#8146);-#8142 = LINE('',#8143,#8144);-#8143 = CARTESIAN_POINT('',(3.9185112847E-02,0.));-#8144 = VECTOR('',#8145,1.);-#8145 = DIRECTION('',(0.,-1.));-#8146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8147 = ORIENTED_EDGE('',*,*,#8148,.T.);-#8148 = EDGE_CURVE('',#8116,#8149,#8151,.T.);-#8149 = VERTEX_POINT('',#8150);-#8150 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5050001- ));-#8151 = SURFACE_CURVE('',#8152,(#8156,#8163),.PCURVE_S1.);-#8152 = LINE('',#8153,#8154);-#8153 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5050001- ));-#8154 = VECTOR('',#8155,1.);-#8155 = DIRECTION('',(0.,1.,0.));-#8156 = PCURVE('',#8124,#8157);-#8157 = DEFINITIONAL_REPRESENTATION('',(#8158),#8162);-#8158 = LINE('',#8159,#8160);-#8159 = CARTESIAN_POINT('',(0.,-4.E-02));-#8160 = VECTOR('',#8161,1.);-#8161 = DIRECTION('',(1.,0.));-#8162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8163 = PCURVE('',#8164,#8169);-#8164 = PLANE('',#8165);-#8165 = AXIS2_PLACEMENT_3D('',#8166,#8167,#8168);-#8166 = CARTESIAN_POINT('',(-0.669614257813,-5.923719618056E-02,- 1.5050001));-#8167 = DIRECTION('',(0.,0.,1.));-#8168 = DIRECTION('',(1.,0.,-0.));-#8169 = DEFINITIONAL_REPRESENTATION('',(#8170),#8174);-#8170 = LINE('',#8171,#8172);-#8171 = CARTESIAN_POINT('',(3.92686632E-03,0.110537109375));-#8172 = VECTOR('',#8173,1.);-#8173 = DIRECTION('',(0.,1.));-#8174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8175 = ORIENTED_EDGE('',*,*,#8176,.F.);-#8176 = EDGE_CURVE('',#8177,#8149,#8179,.T.);-#8177 = VERTEX_POINT('',#8178);-#8178 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5450001- ));-#8179 = SURFACE_CURVE('',#8180,(#8184,#8191),.PCURVE_S1.);-#8180 = LINE('',#8181,#8182);-#8181 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5450001- ));-#8182 = VECTOR('',#8183,1.);-#8183 = DIRECTION('',(-0.,-0.,-1.));-#8184 = PCURVE('',#8124,#8185);-#8185 = DEFINITIONAL_REPRESENTATION('',(#8186),#8190);-#8186 = LINE('',#8187,#8188);-#8187 = CARTESIAN_POINT('',(1.420355902778E-02,0.));-#8188 = VECTOR('',#8189,1.);-#8189 = DIRECTION('',(0.,-1.));-#8190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8191 = PCURVE('',#8192,#8197);-#8192 = PLANE('',#8193);-#8193 = AXIS2_PLACEMENT_3D('',#8194,#8195,#8196);-#8194 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5450001- ));-#8195 = DIRECTION('',(0.,-1.,0.));-#8196 = DIRECTION('',(1.,0.,0.));-#8197 = DEFINITIONAL_REPRESENTATION('',(#8198),#8202);-#8198 = LINE('',#8199,#8200);-#8199 = CARTESIAN_POINT('',(0.,0.));-#8200 = VECTOR('',#8201,1.);-#8201 = DIRECTION('',(0.,-1.));-#8202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8203 = ORIENTED_EDGE('',*,*,#8204,.F.);-#8204 = EDGE_CURVE('',#8114,#8177,#8205,.T.);-#8205 = SURFACE_CURVE('',#8206,(#8210,#8217),.PCURVE_S1.);-#8206 = LINE('',#8207,#8208);-#8207 = CARTESIAN_POINT('',(-0.665687391493,5.129991319444E-02,1.5450001- ));-#8208 = VECTOR('',#8209,1.);-#8209 = DIRECTION('',(0.,1.,0.));-#8210 = PCURVE('',#8124,#8211);-#8211 = DEFINITIONAL_REPRESENTATION('',(#8212),#8216);-#8212 = LINE('',#8213,#8214);-#8213 = CARTESIAN_POINT('',(0.,0.));-#8214 = VECTOR('',#8215,1.);-#8215 = DIRECTION('',(1.,0.));-#8216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8217 = PCURVE('',#8218,#8223);-#8218 = PLANE('',#8219);-#8219 = AXIS2_PLACEMENT_3D('',#8220,#8221,#8222);-#8220 = CARTESIAN_POINT('',(-0.669614257813,-5.923719618056E-02,- 1.5450001));-#8221 = DIRECTION('',(0.,0.,1.));-#8222 = DIRECTION('',(1.,0.,-0.));-#8223 = DEFINITIONAL_REPRESENTATION('',(#8224),#8228);-#8224 = LINE('',#8225,#8226);-#8225 = CARTESIAN_POINT('',(3.92686632E-03,0.110537109375));-#8226 = VECTOR('',#8227,1.);-#8227 = DIRECTION('',(0.,1.));-#8228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8229 = ADVANCED_FACE('',(#8230),#8192,.F.);-#8230 = FACE_BOUND('',#8231,.F.);-#8231 = EDGE_LOOP('',(#8232,#8233,#8256,#8284));-#8232 = ORIENTED_EDGE('',*,*,#8176,.T.);-#8233 = ORIENTED_EDGE('',*,*,#8234,.T.);-#8234 = EDGE_CURVE('',#8149,#8235,#8237,.T.);-#8235 = VERTEX_POINT('',#8236);-#8236 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5050001- ));-#8237 = SURFACE_CURVE('',#8238,(#8242,#8249),.PCURVE_S1.);-#8238 = LINE('',#8239,#8240);-#8239 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5050001- ));-#8240 = VECTOR('',#8241,1.);-#8241 = DIRECTION('',(1.,0.,0.));-#8242 = PCURVE('',#8192,#8243);-#8243 = DEFINITIONAL_REPRESENTATION('',(#8244),#8248);-#8244 = LINE('',#8245,#8246);-#8245 = CARTESIAN_POINT('',(0.,-4.E-02));-#8246 = VECTOR('',#8247,1.);-#8247 = DIRECTION('',(1.,0.));-#8248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8249 = PCURVE('',#8164,#8250);-#8250 = DEFINITIONAL_REPRESENTATION('',(#8251),#8255);-#8251 = LINE('',#8252,#8253);-#8252 = CARTESIAN_POINT('',(3.92686632E-03,0.124740668403));-#8253 = VECTOR('',#8254,1.);-#8254 = DIRECTION('',(1.,0.));-#8255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8256 = ORIENTED_EDGE('',*,*,#8257,.F.);-#8257 = EDGE_CURVE('',#8258,#8235,#8260,.T.);-#8258 = VERTEX_POINT('',#8259);-#8259 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5450001- ));-#8260 = SURFACE_CURVE('',#8261,(#8265,#8272),.PCURVE_S1.);-#8261 = LINE('',#8262,#8263);-#8262 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5450001- ));-#8263 = VECTOR('',#8264,1.);-#8264 = DIRECTION('',(-0.,-0.,-1.));-#8265 = PCURVE('',#8192,#8266);-#8266 = DEFINITIONAL_REPRESENTATION('',(#8267),#8271);-#8267 = LINE('',#8268,#8269);-#8268 = CARTESIAN_POINT('',(9.5163845486E-02,0.));-#8269 = VECTOR('',#8270,1.);-#8270 = DIRECTION('',(0.,-1.));-#8271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8272 = PCURVE('',#8273,#8278);-#8273 = PLANE('',#8274);-#8274 = AXIS2_PLACEMENT_3D('',#8275,#8276,#8277);-#8275 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5450001- ));-#8276 = DIRECTION('',(-1.,0.,0.));-#8277 = DIRECTION('',(0.,-1.,0.));-#8278 = DEFINITIONAL_REPRESENTATION('',(#8279),#8283);-#8279 = LINE('',#8280,#8281);-#8280 = CARTESIAN_POINT('',(0.,0.));-#8281 = VECTOR('',#8282,1.);-#8282 = DIRECTION('',(0.,-1.));-#8283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8284 = ORIENTED_EDGE('',*,*,#8285,.F.);-#8285 = EDGE_CURVE('',#8177,#8258,#8286,.T.);-#8286 = SURFACE_CURVE('',#8287,(#8291,#8298),.PCURVE_S1.);-#8287 = LINE('',#8288,#8289);-#8288 = CARTESIAN_POINT('',(-0.665687391493,6.550347222222E-02,1.5450001- ));-#8289 = VECTOR('',#8290,1.);-#8290 = DIRECTION('',(1.,0.,0.));-#8291 = PCURVE('',#8192,#8292);-#8292 = DEFINITIONAL_REPRESENTATION('',(#8293),#8297);-#8293 = LINE('',#8294,#8295);-#8294 = CARTESIAN_POINT('',(0.,0.));-#8295 = VECTOR('',#8296,1.);-#8296 = DIRECTION('',(1.,0.));-#8297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8298 = PCURVE('',#8218,#8299);-#8299 = DEFINITIONAL_REPRESENTATION('',(#8300),#8304);-#8300 = LINE('',#8301,#8302);-#8301 = CARTESIAN_POINT('',(3.92686632E-03,0.124740668403));-#8302 = VECTOR('',#8303,1.);-#8303 = DIRECTION('',(1.,0.));-#8304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8305 = ADVANCED_FACE('',(#8306),#8273,.F.);-#8306 = FACE_BOUND('',#8307,.F.);-#8307 = EDGE_LOOP('',(#8308,#8309,#8332,#8360));-#8308 = ORIENTED_EDGE('',*,*,#8257,.T.);-#8309 = ORIENTED_EDGE('',*,*,#8310,.T.);-#8310 = EDGE_CURVE('',#8235,#8311,#8313,.T.);-#8311 = VERTEX_POINT('',#8312);-#8312 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5050001- ));-#8313 = SURFACE_CURVE('',#8314,(#8318,#8325),.PCURVE_S1.);-#8314 = LINE('',#8315,#8316);-#8315 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5050001- ));-#8316 = VECTOR('',#8317,1.);-#8317 = DIRECTION('',(0.,-1.,0.));-#8318 = PCURVE('',#8273,#8319);-#8319 = DEFINITIONAL_REPRESENTATION('',(#8320),#8324);-#8320 = LINE('',#8321,#8322);-#8321 = CARTESIAN_POINT('',(0.,-4.E-02));-#8322 = VECTOR('',#8323,1.);-#8323 = DIRECTION('',(1.,0.));-#8324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8325 = PCURVE('',#8164,#8326);-#8326 = DEFINITIONAL_REPRESENTATION('',(#8327),#8331);-#8327 = LINE('',#8328,#8329);-#8328 = CARTESIAN_POINT('',(9.9090711806E-02,0.124740668403));-#8329 = VECTOR('',#8330,1.);-#8330 = DIRECTION('',(0.,-1.));-#8331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8332 = ORIENTED_EDGE('',*,*,#8333,.F.);-#8333 = EDGE_CURVE('',#8334,#8311,#8336,.T.);-#8334 = VERTEX_POINT('',#8335);-#8335 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5450001- ));-#8336 = SURFACE_CURVE('',#8337,(#8341,#8348),.PCURVE_S1.);-#8337 = LINE('',#8338,#8339);-#8338 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5450001- ));-#8339 = VECTOR('',#8340,1.);-#8340 = DIRECTION('',(-0.,-0.,-1.));-#8341 = PCURVE('',#8273,#8342);-#8342 = DEFINITIONAL_REPRESENTATION('',(#8343),#8347);-#8343 = LINE('',#8344,#8345);-#8344 = CARTESIAN_POINT('',(1.420355902778E-02,0.));-#8345 = VECTOR('',#8346,1.);-#8346 = DIRECTION('',(0.,-1.));-#8347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8348 = PCURVE('',#8349,#8354);-#8349 = PLANE('',#8350);-#8350 = AXIS2_PLACEMENT_3D('',#8351,#8352,#8353);-#8351 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5450001- ));-#8352 = DIRECTION('',(0.,1.,0.));-#8353 = DIRECTION('',(-1.,0.,0.));+#8028 = ORIENTED_EDGE('',*,*,#8029,.T.);+#8029 = EDGE_CURVE('',#8014,#8030,#8032,.T.);+#8030 = VERTEX_POINT('',#8031);+#8031 = CARTESIAN_POINT('',(-5.4548665704E-02,0.697862268676,0.955));+#8032 = SURFACE_CURVE('',#8033,(#8037),.PCURVE_S1.);+#8033 = LINE('',#8034,#8035);+#8034 = CARTESIAN_POINT('',(-5.4548665704E-02,0.621610060655,0.955));+#8035 = VECTOR('',#8036,1.);+#8036 = DIRECTION('',(2.22044604925E-16,1.,0.));+#8037 = PCURVE('',#7889,#8038);+#8038 = DEFINITIONAL_REPRESENTATION('',(#8039),#8043);+#8039 = LINE('',#8040,#8041);+#8040 = CARTESIAN_POINT('',(8.939025737562E-02,4.14750185518E-02));+#8041 = VECTOR('',#8042,1.);+#8042 = DIRECTION('',(-1.,0.));+#8043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8044 = ORIENTED_EDGE('',*,*,#8045,.T.);+#8045 = EDGE_CURVE('',#8030,#7879,#8046,.T.);+#8046 = SURFACE_CURVE('',#8047,(#8051),.PCURVE_S1.);+#8047 = LINE('',#8048,#8049);+#8048 = CARTESIAN_POINT('',(-5.4548665704E-02,0.697862268676,0.955));+#8049 = VECTOR('',#8050,1.);+#8050 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#8051 = PCURVE('',#7889,#8052);+#8052 = DEFINITIONAL_REPRESENTATION('',(#8053),#8057);+#8053 = LINE('',#8054,#8055);+#8054 = CARTESIAN_POINT('',(1.313804935492E-02,4.14750185518E-02));+#8055 = VECTOR('',#8056,1.);+#8056 = DIRECTION('',(0.,1.));+#8057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8058 = FACE_BOUND('',#8059,.F.);+#8059 = EDGE_LOOP('',(#8060,#8078,#8094));+#8060 = ORIENTED_EDGE('',*,*,#8061,.T.);+#8061 = EDGE_CURVE('',#8062,#8064,#8066,.T.);+#8062 = VERTEX_POINT('',#8063);+#8063 = CARTESIAN_POINT('',(-2.196115112758E-02,0.621610060655,0.955));+#8064 = VERTEX_POINT('',#8065);+#8065 = CARTESIAN_POINT('',(5.403344808224E-02,0.621610060655,0.955));+#8066 = SURFACE_CURVE('',#8067,(#8071),.PCURVE_S1.);+#8067 = LINE('',#8068,#8069);+#8068 = CARTESIAN_POINT('',(-2.196115112758E-02,0.621610060655,0.955));+#8069 = VECTOR('',#8070,1.);+#8070 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#8071 = PCURVE('',#7889,#8072);+#8072 = DEFINITIONAL_REPRESENTATION('',(#8073),#8077);+#8073 = LINE('',#8074,#8075);+#8074 = CARTESIAN_POINT('',(8.939025737562E-02,7.406253312822E-02));+#8075 = VECTOR('',#8076,1.);+#8076 = DIRECTION('',(0.,1.));+#8077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8078 = ORIENTED_EDGE('',*,*,#8079,.T.);+#8079 = EDGE_CURVE('',#8064,#8080,#8082,.T.);+#8080 = VERTEX_POINT('',#8081);+#8081 = CARTESIAN_POINT('',(-2.196115112758E-02,0.670169321506,0.955));+#8082 = SURFACE_CURVE('',#8083,(#8087),.PCURVE_S1.);+#8083 = LINE('',#8084,#8085);+#8084 = CARTESIAN_POINT('',(5.403344808224E-02,0.621610060655,0.955));+#8085 = VECTOR('',#8086,1.);+#8086 = DIRECTION('',(-0.842660258512,0.538445622812,0.));+#8087 = PCURVE('',#7889,#8088);+#8088 = DEFINITIONAL_REPRESENTATION('',(#8089),#8093);+#8089 = LINE('',#8090,#8091);+#8090 = CARTESIAN_POINT('',(8.939025737562E-02,0.150057132338));+#8091 = VECTOR('',#8092,1.);+#8092 = DIRECTION('',(-0.538445622812,-0.842660258512));+#8093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8094 = ORIENTED_EDGE('',*,*,#8095,.T.);+#8095 = EDGE_CURVE('',#8080,#8062,#8096,.T.);+#8096 = SURFACE_CURVE('',#8097,(#8101),.PCURVE_S1.);+#8097 = LINE('',#8098,#8099);+#8098 = CARTESIAN_POINT('',(-2.196115112758E-02,0.670169321506,0.955));+#8099 = VECTOR('',#8100,1.);+#8100 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8101 = PCURVE('',#7889,#8102);+#8102 = DEFINITIONAL_REPRESENTATION('',(#8103),#8107);+#8103 = LINE('',#8104,#8105);+#8104 = CARTESIAN_POINT('',(4.08309965246E-02,7.406253312822E-02));+#8105 = VECTOR('',#8106,1.);+#8106 = DIRECTION('',(1.,0.));+#8107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8108 = SHELL_BASED_SURFACE_MODEL('',(#8109));+#8109 = OPEN_SHELL('',(#8110));+#8110 = ADVANCED_FACE('',(#8111),#8125,.T.);+#8111 = FACE_BOUND('',#8112,.F.);+#8112 = EDGE_LOOP('',(#8113,#8136,#8152,#8168,#8184,#8200,#8216,#8232,+ #8248,#8264,#8280,#8296,#8312,#8328,#8344,#8360,#8376,#8392));+#8113 = ORIENTED_EDGE('',*,*,#8114,.T.);+#8114 = EDGE_CURVE('',#8115,#8117,#8119,.T.);+#8115 = VERTEX_POINT('',#8116);+#8116 = CARTESIAN_POINT('',(-4.823724983742E-02,0.412946923842,0.955));+#8117 = VERTEX_POINT('',#8118);+#8118 = CARTESIAN_POINT('',(-9.048509482186E-02,0.412946923842,0.955));+#8119 = SURFACE_CURVE('',#8120,(#8124),.PCURVE_S1.);+#8120 = LINE('',#8121,#8122);+#8121 = CARTESIAN_POINT('',(-4.823724983742E-02,0.412946923842,0.955));+#8122 = VECTOR('',#8123,1.);+#8123 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#8124 = PCURVE('',#8125,#8130);+#8125 = PLANE('',#8126);+#8126 = AXIS2_PLACEMENT_3D('',#8127,#8128,#8129);+#8127 = CARTESIAN_POINT('',(-9.60236842558E-02,0.552184486123,0.955));+#8128 = DIRECTION('',(0.,0.,1.));+#8129 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8130 = DEFINITIONAL_REPRESENTATION('',(#8131),#8135);+#8131 = LINE('',#8132,#8133);+#8132 = CARTESIAN_POINT('',(0.139237562281,4.778643441838E-02));+#8133 = VECTOR('',#8134,1.);+#8134 = DIRECTION('',(0.,-1.));+#8135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8136 = ORIENTED_EDGE('',*,*,#8137,.T.);+#8137 = EDGE_CURVE('',#8117,#8138,#8140,.T.);+#8138 = VERTEX_POINT('',#8139);+#8139 = CARTESIAN_POINT('',(-9.744053271564E-02,0.431881171442,0.955));+#8140 = SURFACE_CURVE('',#8141,(#8145),.PCURVE_S1.);+#8141 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8142,#8143,#8144),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8142 = CARTESIAN_POINT('',(-9.048509482186E-02,0.412946923842,0.955));+#8143 = CARTESIAN_POINT('',(-9.512205341772E-02,0.421963232223,0.955));+#8144 = CARTESIAN_POINT('',(-9.744053271564E-02,0.431881171442,0.955));+#8145 = PCURVE('',#8125,#8146);+#8146 = DEFINITIONAL_REPRESENTATION('',(#8147),#8151);+#8147 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8148,#8149,#8150),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8148 = CARTESIAN_POINT('',(0.139237562281,5.538589433936E-03));+#8149 = CARTESIAN_POINT('',(0.1302212539,9.016308380825E-04));+#8150 = CARTESIAN_POINT('',(0.120303314681,-1.416848459844E-03));+#8151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8152 = ORIENTED_EDGE('',*,*,#8153,.T.);+#8153 = EDGE_CURVE('',#8138,#8154,#8156,.T.);+#8154 = VERTEX_POINT('',#8155);+#8155 = CARTESIAN_POINT('',(-9.975901201357E-02,0.452747485123,0.955));+#8156 = SURFACE_CURVE('',#8157,(#8161),.PCURVE_S1.);+#8157 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8158,#8159,#8160),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8158 = CARTESIAN_POINT('',(-9.744053271564E-02,0.431881171442,0.955));+#8159 = CARTESIAN_POINT('',(-9.975901201357E-02,0.44179911066,0.955));+#8160 = CARTESIAN_POINT('',(-9.975901201357E-02,0.452747485123,0.955));+#8161 = PCURVE('',#8125,#8162);+#8162 = DEFINITIONAL_REPRESENTATION('',(#8163),#8167);+#8163 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8164,#8165,#8166),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8164 = CARTESIAN_POINT('',(0.120303314681,-1.416848459844E-03));+#8165 = CARTESIAN_POINT('',(0.110385375462,-3.735327757771E-03));+#8166 = CARTESIAN_POINT('',(9.943700099997E-02,-3.735327757771E-03));+#8167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8168 = ORIENTED_EDGE('',*,*,#8169,.T.);+#8169 = EDGE_CURVE('',#8154,#8170,#8172,.T.);+#8170 = VERTEX_POINT('',#8171);+#8171 = CARTESIAN_POINT('',(-7.412693533094E-02,0.512126316031,0.955));+#8172 = SURFACE_CURVE('',#8173,(#8177),.PCURVE_S1.);+#8173 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8174,#8175,#8176),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8174 = CARTESIAN_POINT('',(-9.975901201357E-02,0.452747485123,0.955));+#8175 = CARTESIAN_POINT('',(-9.975901201357E-02,0.491646415566,0.955));+#8176 = CARTESIAN_POINT('',(-7.412693533094E-02,0.512126316031,0.955));+#8177 = PCURVE('',#8125,#8178);+#8178 = DEFINITIONAL_REPRESENTATION('',(#8179),#8183);+#8179 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8180,#8181,#8182),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8180 = CARTESIAN_POINT('',(9.943700099997E-02,-3.735327757771E-03));+#8181 = CARTESIAN_POINT('',(6.053807055698E-02,-3.735327757771E-03));+#8182 = CARTESIAN_POINT('',(4.005817009196E-02,2.189674892486E-02));+#8183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8184 = ORIENTED_EDGE('',*,*,#8185,.T.);+#8185 = EDGE_CURVE('',#8170,#8186,#8188,.T.);+#8186 = VERTEX_POINT('',#8187);+#8187 = CARTESIAN_POINT('',(-6.440220272007E-05,0.532606216496,0.955));+#8188 = SURFACE_CURVE('',#8189,(#8193),.PCURVE_S1.);+#8189 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8190,#8191,#8192),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8190 = CARTESIAN_POINT('',(-7.412693533094E-02,0.512126316031,0.955));+#8191 = CARTESIAN_POINT('',(-4.84948586483E-02,0.532606216496,0.955));+#8192 = CARTESIAN_POINT('',(-6.440220272008E-05,0.532606216496,0.955));+#8193 = PCURVE('',#8125,#8194);+#8194 = DEFINITIONAL_REPRESENTATION('',(#8195),#8199);+#8195 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8196,#8197,#8198),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8196 = CARTESIAN_POINT('',(4.005817009196E-02,2.189674892486E-02));+#8197 = CARTESIAN_POINT('',(1.957826962694E-02,4.75288256075E-02));+#8198 = CARTESIAN_POINT('',(1.957826962694E-02,9.595928205308E-02));+#8199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8200 = ORIENTED_EDGE('',*,*,#8201,.T.);+#8201 = EDGE_CURVE('',#8186,#8202,#8204,.T.);+#8202 = VERTEX_POINT('',#8203);+#8203 = CARTESIAN_POINT('',(7.412693533094E-02,0.512126316031,0.955));+#8204 = SURFACE_CURVE('',#8205,(#8209),.PCURVE_S1.);+#8205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8206,#8207,#8208),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8206 = CARTESIAN_POINT('',(-6.440220272008E-05,0.532606216496,0.955));+#8207 = CARTESIAN_POINT('',(4.84948586483E-02,0.532606216496,0.955));+#8208 = CARTESIAN_POINT('',(7.412693533094E-02,0.512126316031,0.955));+#8209 = PCURVE('',#8125,#8210);+#8210 = DEFINITIONAL_REPRESENTATION('',(#8211),#8215);+#8211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8212,#8213,#8214),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8212 = CARTESIAN_POINT('',(1.957826962694E-02,9.595928205308E-02));+#8213 = CARTESIAN_POINT('',(1.957826962694E-02,0.144518542904));+#8214 = CARTESIAN_POINT('',(4.005817009196E-02,0.170150619587));+#8215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8216 = ORIENTED_EDGE('',*,*,#8217,.T.);+#8217 = EDGE_CURVE('',#8202,#8218,#8220,.T.);+#8218 = VERTEX_POINT('',#8219);+#8219 = CARTESIAN_POINT('',(9.975901201357E-02,0.452747485123,0.955));+#8220 = SURFACE_CURVE('',#8221,(#8225),.PCURVE_S1.);+#8221 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8222,#8223,#8224),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8222 = CARTESIAN_POINT('',(7.412693533094E-02,0.512126316031,0.955));+#8223 = CARTESIAN_POINT('',(9.975901201357E-02,0.491646415566,0.955));+#8224 = CARTESIAN_POINT('',(9.975901201357E-02,0.452747485123,0.955));+#8225 = PCURVE('',#8125,#8226);+#8226 = DEFINITIONAL_REPRESENTATION('',(#8227),#8231);+#8227 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8228,#8229,#8230),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8228 = CARTESIAN_POINT('',(4.005817009196E-02,0.170150619587));+#8229 = CARTESIAN_POINT('',(6.053807055698E-02,0.195782696269));+#8230 = CARTESIAN_POINT('',(9.943700099997E-02,0.195782696269));+#8231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8232 = ORIENTED_EDGE('',*,*,#8233,.T.);+#8233 = EDGE_CURVE('',#8218,#8234,#8236,.T.);+#8234 = VERTEX_POINT('',#8235);+#8235 = CARTESIAN_POINT('',(9.744053271564E-02,0.431752367036,0.955));+#8236 = SURFACE_CURVE('',#8237,(#8241),.PCURVE_S1.);+#8237 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8238,#8239,#8240),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8238 = CARTESIAN_POINT('',(9.975901201357E-02,0.452747485123,0.955));+#8239 = CARTESIAN_POINT('',(9.975901201357E-02,0.44179911066,0.955));+#8240 = CARTESIAN_POINT('',(9.744053271565E-02,0.431752367036,0.955));+#8241 = PCURVE('',#8125,#8242);+#8242 = DEFINITIONAL_REPRESENTATION('',(#8243),#8247);+#8243 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8244,#8245,#8246),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8244 = CARTESIAN_POINT('',(9.943700099997E-02,0.195782696269));+#8245 = CARTESIAN_POINT('',(0.110385375462,0.195782696269));+#8246 = CARTESIAN_POINT('',(0.120432119087,0.193464216971));+#8247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8248 = ORIENTED_EDGE('',*,*,#8249,.T.);+#8249 = EDGE_CURVE('',#8234,#8250,#8252,.T.);+#8250 = VERTEX_POINT('',#8251);+#8251 = CARTESIAN_POINT('',(9.048509482186E-02,0.412946923842,0.955));+#8252 = SURFACE_CURVE('',#8253,(#8257),.PCURVE_S1.);+#8253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8254,#8255,#8256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8254 = CARTESIAN_POINT('',(9.744053271565E-02,0.431752367036,0.955));+#8255 = CARTESIAN_POINT('',(9.512205341772E-02,0.421705623412,0.955));+#8256 = CARTESIAN_POINT('',(9.048509482186E-02,0.412946923842,0.955));+#8257 = PCURVE('',#8125,#8258);+#8258 = DEFINITIONAL_REPRESENTATION('',(#8259),#8263);+#8259 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8260,#8261,#8262),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8260 = CARTESIAN_POINT('',(0.120432119087,0.193464216971));+#8261 = CARTESIAN_POINT('',(0.130478862711,0.191145737674));+#8262 = CARTESIAN_POINT('',(0.139237562281,0.186508779078));+#8263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8264 = ORIENTED_EDGE('',*,*,#8265,.T.);+#8265 = EDGE_CURVE('',#8250,#8266,#8268,.T.);+#8266 = VERTEX_POINT('',#8267);+#8267 = CARTESIAN_POINT('',(4.823724983742E-02,0.412946923842,0.955));+#8268 = SURFACE_CURVE('',#8269,(#8273),.PCURVE_S1.);+#8269 = LINE('',#8270,#8271);+#8270 = CARTESIAN_POINT('',(9.048509482186E-02,0.412946923842,0.955));+#8271 = VECTOR('',#8272,1.);+#8272 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#8273 = PCURVE('',#8125,#8274);+#8274 = DEFINITIONAL_REPRESENTATION('',(#8275),#8279);+#8275 = LINE('',#8276,#8277);+#8276 = CARTESIAN_POINT('',(0.139237562281,0.186508779078));+#8277 = VECTOR('',#8278,1.);+#8278 = DIRECTION('',(0.,-1.));+#8279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8280 = ORIENTED_EDGE('',*,*,#8281,.T.);+#8281 = EDGE_CURVE('',#8266,#8282,#8284,.T.);+#8282 = VERTEX_POINT('',#8283);+#8283 = CARTESIAN_POINT('',(6.143970139506E-02,0.431945573644,0.955));+#8284 = SURFACE_CURVE('',#8285,(#8289),.PCURVE_S1.);+#8285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8286,#8287,#8288),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8286 = CARTESIAN_POINT('',(4.823724983742E-02,0.412946923842,0.955));+#8287 = CARTESIAN_POINT('',(5.725355821825E-02,0.422736058655,0.955));+#8288 = CARTESIAN_POINT('',(6.143970139506E-02,0.431945573644,0.955));+#8289 = PCURVE('',#8125,#8290);+#8290 = DEFINITIONAL_REPRESENTATION('',(#8291),#8295);+#8291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8292,#8293,#8294),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8292 = CARTESIAN_POINT('',(0.139237562281,0.144260934093));+#8293 = CARTESIAN_POINT('',(0.129448427468,0.153277242474));+#8294 = CARTESIAN_POINT('',(0.120238912479,0.157463385651));+#8295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8296 = ORIENTED_EDGE('',*,*,#8297,.T.);+#8297 = EDGE_CURVE('',#8282,#8298,#8300,.T.);+#8298 = VERTEX_POINT('',#8299);+#8299 = CARTESIAN_POINT('',(6.562584457187E-02,0.450944223447,0.955));+#8300 = SURFACE_CURVE('',#8301,(#8305),.PCURVE_S1.);+#8301 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8302,#8303,#8304),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8302 = CARTESIAN_POINT('',(6.143970139506E-02,0.431945573644,0.955));+#8303 = CARTESIAN_POINT('',(6.562584457187E-02,0.441155088633,0.955));+#8304 = CARTESIAN_POINT('',(6.562584457187E-02,0.450944223447,0.955));+#8305 = PCURVE('',#8125,#8306);+#8306 = DEFINITIONAL_REPRESENTATION('',(#8307),#8311);+#8307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8308,#8309,#8310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8308 = CARTESIAN_POINT('',(0.120238912479,0.157463385651));+#8309 = CARTESIAN_POINT('',(0.11102939749,0.161649528828));+#8310 = CARTESIAN_POINT('',(0.101240262676,0.161649528828));+#8311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8312 = ORIENTED_EDGE('',*,*,#8313,.T.);+#8313 = EDGE_CURVE('',#8298,#8314,#8316,.T.);+#8314 = VERTEX_POINT('',#8315);+#8315 = CARTESIAN_POINT('',(4.907447847278E-02,0.482436900577,0.955));+#8316 = SURFACE_CURVE('',#8317,(#8321),.PCURVE_S1.);+#8317 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8318,#8319,#8320),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8318 = CARTESIAN_POINT('',(6.562584457187E-02,0.450944223447,0.955));+#8319 = CARTESIAN_POINT('',(6.562584457187E-02,0.471810537128,0.955));+#8320 = CARTESIAN_POINT('',(4.907447847278E-02,0.482436900577,0.955));+#8321 = PCURVE('',#8125,#8322);+#8322 = DEFINITIONAL_REPRESENTATION('',(#8323),#8327);+#8323 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8324,#8325,#8326),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8324 = CARTESIAN_POINT('',(0.101240262676,0.161649528828));+#8325 = CARTESIAN_POINT('',(8.037394899479E-02,0.161649528828));+#8326 = CARTESIAN_POINT('',(6.974758554596E-02,0.145098162729));+#8327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8328 = ORIENTED_EDGE('',*,*,#8329,.T.);+#8329 = EDGE_CURVE('',#8314,#8330,#8332,.T.);+#8330 = VERTEX_POINT('',#8331);+#8331 = CARTESIAN_POINT('',(-6.440220272008E-05,0.493063264026,0.955));+#8332 = SURFACE_CURVE('',#8333,(#8337),.PCURVE_S1.);+#8333 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8334,#8335,#8336),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8334 = CARTESIAN_POINT('',(4.907447847278E-02,0.482436900577,0.955));+#8335 = CARTESIAN_POINT('',(3.25231123737E-02,0.493063264026,0.955));+#8336 = CARTESIAN_POINT('',(-6.440220272008E-05,0.493063264026,0.955));+#8337 = PCURVE('',#8125,#8338);+#8338 = DEFINITIONAL_REPRESENTATION('',(#8339),#8343);+#8339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8340,#8341,#8342),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8340 = CARTESIAN_POINT('',(6.974758554596E-02,0.145098162729));+#8341 = CARTESIAN_POINT('',(5.912122209713E-02,0.128546796629));+#8342 = CARTESIAN_POINT('',(5.912122209713E-02,9.595928205308E-02));+#8343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8344 = ORIENTED_EDGE('',*,*,#8345,.T.);+#8345 = EDGE_CURVE('',#8330,#8346,#8348,.T.);+#8346 = VERTEX_POINT('',#8347);+#8347 = CARTESIAN_POINT('',(-4.907447847278E-02,0.482436900577,0.955));+#8348 = SURFACE_CURVE('',#8349,(#8353),.PCURVE_S1.);+#8349 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8350,#8351,#8352),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8350 = CARTESIAN_POINT('',(-6.440220272008E-05,0.493063264026,0.955));+#8351 = CARTESIAN_POINT('',(-3.252311237369E-02,0.493063264026,0.955));+#8352 = CARTESIAN_POINT('',(-4.907447847278E-02,0.482436900577,0.955));+#8353 = PCURVE('',#8125,#8354); #8354 = DEFINITIONAL_REPRESENTATION('',(#8355),#8359);-#8355 = LINE('',#8356,#8357);-#8356 = CARTESIAN_POINT('',(0.,0.));-#8357 = VECTOR('',#8358,1.);-#8358 = DIRECTION('',(0.,-1.));+#8355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8356,#8357,#8358),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8356 = CARTESIAN_POINT('',(5.912122209713E-02,9.595928205308E-02));+#8357 = CARTESIAN_POINT('',(5.912122209713E-02,6.350057188211E-02));+#8358 = CARTESIAN_POINT('',(6.974758554596E-02,4.694920578302E-02)); #8359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8360 = ORIENTED_EDGE('',*,*,#8361,.F.);-#8361 = EDGE_CURVE('',#8258,#8334,#8362,.T.);-#8362 = SURFACE_CURVE('',#8363,(#8367,#8374),.PCURVE_S1.);-#8363 = LINE('',#8364,#8365);-#8364 = CARTESIAN_POINT('',(-0.570523546007,6.550347222222E-02,1.5450001- ));-#8365 = VECTOR('',#8366,1.);-#8366 = DIRECTION('',(0.,-1.,0.));-#8367 = PCURVE('',#8273,#8368);-#8368 = DEFINITIONAL_REPRESENTATION('',(#8369),#8373);-#8369 = LINE('',#8370,#8371);-#8370 = CARTESIAN_POINT('',(0.,0.));-#8371 = VECTOR('',#8372,1.);-#8372 = DIRECTION('',(1.,0.));-#8373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8374 = PCURVE('',#8218,#8375);-#8375 = DEFINITIONAL_REPRESENTATION('',(#8376),#8380);-#8376 = LINE('',#8377,#8378);-#8377 = CARTESIAN_POINT('',(9.9090711806E-02,0.124740668403));-#8378 = VECTOR('',#8379,1.);-#8379 = DIRECTION('',(0.,-1.));-#8380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8381 = ADVANCED_FACE('',(#8382),#8349,.F.);-#8382 = FACE_BOUND('',#8383,.F.);-#8383 = EDGE_LOOP('',(#8384,#8385,#8408,#8436));-#8384 = ORIENTED_EDGE('',*,*,#8333,.T.);-#8385 = ORIENTED_EDGE('',*,*,#8386,.T.);-#8386 = EDGE_CURVE('',#8311,#8387,#8389,.T.);-#8387 = VERTEX_POINT('',#8388);-#8388 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5050001)- );-#8389 = SURFACE_CURVE('',#8390,(#8394,#8401),.PCURVE_S1.);-#8390 = LINE('',#8391,#8392);-#8391 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5050001- ));-#8392 = VECTOR('',#8393,1.);-#8393 = DIRECTION('',(-1.,0.,0.));-#8394 = PCURVE('',#8349,#8395);-#8395 = DEFINITIONAL_REPRESENTATION('',(#8396),#8400);-#8396 = LINE('',#8397,#8398);-#8397 = CARTESIAN_POINT('',(0.,-4.E-02));-#8398 = VECTOR('',#8399,1.);-#8399 = DIRECTION('',(1.,0.));-#8400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8401 = PCURVE('',#8164,#8402);-#8402 = DEFINITIONAL_REPRESENTATION('',(#8403),#8407);-#8403 = LINE('',#8404,#8405);-#8404 = CARTESIAN_POINT('',(9.9090711806E-02,0.110537109375));-#8405 = VECTOR('',#8406,1.);-#8406 = DIRECTION('',(-1.,0.));-#8407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8408 = ORIENTED_EDGE('',*,*,#8409,.F.);-#8409 = EDGE_CURVE('',#8410,#8387,#8412,.T.);-#8410 = VERTEX_POINT('',#8411);-#8411 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5450001)- );-#8412 = SURFACE_CURVE('',#8413,(#8417,#8424),.PCURVE_S1.);-#8413 = LINE('',#8414,#8415);-#8414 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5450001)- );-#8415 = VECTOR('',#8416,1.);-#8416 = DIRECTION('',(-0.,-0.,-1.));-#8417 = PCURVE('',#8349,#8418);-#8418 = DEFINITIONAL_REPRESENTATION('',(#8419),#8423);-#8419 = LINE('',#8420,#8421);-#8420 = CARTESIAN_POINT('',(3.9018012153E-02,0.));-#8421 = VECTOR('',#8422,1.);-#8422 = DIRECTION('',(0.,-1.));-#8423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8424 = PCURVE('',#8425,#8430);-#8425 = PLANE('',#8426);-#8426 = AXIS2_PLACEMENT_3D('',#8427,#8428,#8429);-#8427 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5450001)- );-#8428 = DIRECTION('',(-1.,0.,0.));-#8429 = DIRECTION('',(0.,-1.,0.));-#8430 = DEFINITIONAL_REPRESENTATION('',(#8431),#8435);-#8431 = LINE('',#8432,#8433);-#8432 = CARTESIAN_POINT('',(0.,0.));-#8433 = VECTOR('',#8434,1.);-#8434 = DIRECTION('',(0.,-1.));-#8435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8436 = ORIENTED_EDGE('',*,*,#8437,.F.);-#8437 = EDGE_CURVE('',#8334,#8410,#8438,.T.);-#8438 = SURFACE_CURVE('',#8439,(#8443,#8450),.PCURVE_S1.);-#8439 = LINE('',#8440,#8441);-#8440 = CARTESIAN_POINT('',(-0.570523546007,5.129991319444E-02,1.5450001- ));-#8441 = VECTOR('',#8442,1.);-#8442 = DIRECTION('',(-1.,0.,0.));-#8443 = PCURVE('',#8349,#8444);+#8360 = ORIENTED_EDGE('',*,*,#8361,.T.);+#8361 = EDGE_CURVE('',#8346,#8362,#8364,.T.);+#8362 = VERTEX_POINT('',#8363);+#8363 = CARTESIAN_POINT('',(-6.562584457187E-02,0.450944223447,0.955));+#8364 = SURFACE_CURVE('',#8365,(#8369),.PCURVE_S1.);+#8365 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8366,#8367,#8368),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8366 = CARTESIAN_POINT('',(-4.907447847278E-02,0.482436900577,0.955));+#8367 = CARTESIAN_POINT('',(-6.562584457187E-02,0.471810537128,0.955));+#8368 = CARTESIAN_POINT('',(-6.562584457187E-02,0.450944223447,0.955));+#8369 = PCURVE('',#8125,#8370);+#8370 = DEFINITIONAL_REPRESENTATION('',(#8371),#8375);+#8371 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8372,#8373,#8374),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8372 = CARTESIAN_POINT('',(6.974758554596E-02,4.694920578302E-02));+#8373 = CARTESIAN_POINT('',(8.037394899479E-02,3.039783968393E-02));+#8374 = CARTESIAN_POINT('',(0.101240262676,3.039783968393E-02));+#8375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8376 = ORIENTED_EDGE('',*,*,#8377,.T.);+#8377 = EDGE_CURVE('',#8362,#8378,#8380,.T.);+#8378 = VERTEX_POINT('',#8379);+#8379 = CARTESIAN_POINT('',(-6.143970139506E-02,0.431945573644,0.955));+#8380 = SURFACE_CURVE('',#8381,(#8385),.PCURVE_S1.);+#8381 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8382,#8383,#8384),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8382 = CARTESIAN_POINT('',(-6.562584457187E-02,0.450944223447,0.955));+#8383 = CARTESIAN_POINT('',(-6.562584457187E-02,0.441155088633,0.955));+#8384 = CARTESIAN_POINT('',(-6.143970139506E-02,0.431945573644,0.955));+#8385 = PCURVE('',#8125,#8386);+#8386 = DEFINITIONAL_REPRESENTATION('',(#8387),#8391);+#8387 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8388,#8389,#8390),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8388 = CARTESIAN_POINT('',(0.101240262676,3.039783968393E-02));+#8389 = CARTESIAN_POINT('',(0.11102939749,3.039783968393E-02));+#8390 = CARTESIAN_POINT('',(0.120238912479,3.458398286074E-02));+#8391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8392 = ORIENTED_EDGE('',*,*,#8393,.T.);+#8393 = EDGE_CURVE('',#8378,#8115,#8394,.T.);+#8394 = SURFACE_CURVE('',#8395,(#8399),.PCURVE_S1.);+#8395 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8396,#8397,#8398),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8396 = CARTESIAN_POINT('',(-6.143970139506E-02,0.431945573644,0.955));+#8397 = CARTESIAN_POINT('',(-5.725355821825E-02,0.422736058655,0.955));+#8398 = CARTESIAN_POINT('',(-4.823724983742E-02,0.412946923842,0.955));+#8399 = PCURVE('',#8125,#8400);+#8400 = DEFINITIONAL_REPRESENTATION('',(#8401),#8405);+#8401 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8402,#8403,#8404),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8402 = CARTESIAN_POINT('',(0.120238912479,3.458398286074E-02));+#8403 = CARTESIAN_POINT('',(0.129448427468,3.877012603755E-02));+#8404 = CARTESIAN_POINT('',(0.139237562281,4.778643441838E-02));+#8405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8406 = SHELL_BASED_SURFACE_MODEL('',(#8407));+#8407 = OPEN_SHELL('',(#8408));+#8408 = ADVANCED_FACE('',(#8409),#8423,.T.);+#8409 = FACE_BOUND('',#8410,.F.);+#8410 = EDGE_LOOP('',(#8411,#8434,#8450,#8466,#8482,#8498,#8514,#8530,+ #8546,#8562,#8578,#8594,#8610,#8626,#8642,#8658,#8674,#8690,#8706,+ #8722,#8738,#8754,#8770,#8786,#8802,#8818,#8834,#8850));+#8411 = ORIENTED_EDGE('',*,*,#8412,.T.);+#8412 = EDGE_CURVE('',#8413,#8415,#8417,.T.);+#8413 = VERTEX_POINT('',#8414);+#8414 = CARTESIAN_POINT('',(-1.874104099157E-02,0.309001768651,0.955));+#8415 = VERTEX_POINT('',#8416);+#8416 = CARTESIAN_POINT('',(-1.165679869235E-02,0.32767840744,0.955));+#8417 = SURFACE_CURVE('',#8418,(#8422),.PCURVE_S1.);+#8418 = LINE('',#8419,#8420);+#8419 = CARTESIAN_POINT('',(-1.874104099157E-02,0.309001768651,0.955));+#8420 = VECTOR('',#8421,1.);+#8421 = DIRECTION('',(0.354654234121,0.934997526318,0.));+#8422 = PCURVE('',#8423,#8428);+#8423 = PLANE('',#8424);+#8424 = AXIS2_PLACEMENT_3D('',#8425,#8426,#8427);+#8425 = CARTESIAN_POINT('',(-9.60236842558E-02,0.393368654215,0.955));+#8426 = DIRECTION('',(0.,0.,1.));+#8427 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8428 = DEFINITIONAL_REPRESENTATION('',(#8429),#8433);+#8429 = LINE('',#8430,#8431);+#8430 = CARTESIAN_POINT('',(8.436688556345E-02,7.728264326423E-02));+#8431 = VECTOR('',#8432,1.);+#8432 = DIRECTION('',(-0.934997526318,0.354654234121));+#8433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8434 = ORIENTED_EDGE('',*,*,#8435,.T.);+#8435 = EDGE_CURVE('',#8415,#8436,#8438,.T.);+#8436 = VERTEX_POINT('',#8437);+#8437 = CARTESIAN_POINT('',(1.133478767875E-02,0.366577337883,0.955));+#8438 = SURFACE_CURVE('',#8439,(#8443),.PCURVE_S1.);+#8439 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8440,#8441,#8442),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8440 = CARTESIAN_POINT('',(-1.165679869235E-02,0.32767840744,0.955));+#8441 = CARTESIAN_POINT('',(-7.084242299222E-04,0.356401789854,0.955));+#8442 = CARTESIAN_POINT('',(1.133478767875E-02,0.366577337883,0.955));+#8443 = PCURVE('',#8423,#8444); #8444 = DEFINITIONAL_REPRESENTATION('',(#8445),#8449);-#8445 = LINE('',#8446,#8447);-#8446 = CARTESIAN_POINT('',(0.,0.));-#8447 = VECTOR('',#8448,1.);-#8448 = DIRECTION('',(1.,0.));+#8445 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8446,#8447,#8448),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8446 = CARTESIAN_POINT('',(6.569024677459E-02,8.436688556345E-02));+#8447 = CARTESIAN_POINT('',(3.696686436139E-02,9.531526002588E-02));+#8448 = CARTESIAN_POINT('',(2.67913163316E-02,0.107358471935)); #8449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#8450 = PCURVE('',#8218,#8451);-#8451 = DEFINITIONAL_REPRESENTATION('',(#8452),#8456);-#8452 = LINE('',#8453,#8454);-#8453 = CARTESIAN_POINT('',(9.9090711806E-02,0.110537109375));-#8454 = VECTOR('',#8455,1.);-#8455 = DIRECTION('',(-1.,0.));-#8456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8457 = ADVANCED_FACE('',(#8458),#8425,.F.);-#8458 = FACE_BOUND('',#8459,.F.);-#8459 = EDGE_LOOP('',(#8460,#8461,#8484,#8512));-#8460 = ORIENTED_EDGE('',*,*,#8409,.T.);-#8461 = ORIENTED_EDGE('',*,*,#8462,.T.);-#8462 = EDGE_CURVE('',#8387,#8463,#8465,.T.);-#8463 = VERTEX_POINT('',#8464);-#8464 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5050001- ));-#8465 = SURFACE_CURVE('',#8466,(#8470,#8477),.PCURVE_S1.);-#8466 = LINE('',#8467,#8468);-#8467 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5050001)- );-#8468 = VECTOR('',#8469,1.);-#8469 = DIRECTION('',(0.,-1.,0.));-#8470 = PCURVE('',#8425,#8471);-#8471 = DEFINITIONAL_REPRESENTATION('',(#8472),#8476);-#8472 = LINE('',#8473,#8474);-#8473 = CARTESIAN_POINT('',(0.,-4.E-02));-#8474 = VECTOR('',#8475,1.);-#8475 = DIRECTION('',(1.,0.));-#8476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8477 = PCURVE('',#8164,#8478);-#8478 = DEFINITIONAL_REPRESENTATION('',(#8479),#8483);-#8479 = LINE('',#8480,#8481);-#8480 = CARTESIAN_POINT('',(6.0072699653E-02,0.110537109375));-#8481 = VECTOR('',#8482,1.);-#8482 = DIRECTION('',(0.,-1.));-#8483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8484 = ORIENTED_EDGE('',*,*,#8485,.F.);-#8485 = EDGE_CURVE('',#8486,#8463,#8488,.T.);-#8486 = VERTEX_POINT('',#8487);-#8487 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5450001- ));-#8488 = SURFACE_CURVE('',#8489,(#8493,#8500),.PCURVE_S1.);-#8489 = LINE('',#8490,#8491);-#8490 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5450001- ));-#8491 = VECTOR('',#8492,1.);-#8492 = DIRECTION('',(-0.,-0.,-1.));-#8493 = PCURVE('',#8425,#8494);-#8494 = DEFINITIONAL_REPRESENTATION('',(#8495),#8499);-#8495 = LINE('',#8496,#8497);-#8496 = CARTESIAN_POINT('',(0.110537109375,0.));-#8497 = VECTOR('',#8498,1.);-#8498 = DIRECTION('',(0.,-1.));-#8499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8500 = PCURVE('',#8501,#8506);-#8501 = PLANE('',#8502);-#8502 = AXIS2_PLACEMENT_3D('',#8503,#8504,#8505);-#8503 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5450001- ));-#8504 = DIRECTION('',(0.,1.,0.));-#8505 = DIRECTION('',(-1.,0.,0.));-#8506 = DEFINITIONAL_REPRESENTATION('',(#8507),#8511);-#8507 = LINE('',#8508,#8509);-#8508 = CARTESIAN_POINT('',(0.,0.));-#8509 = VECTOR('',#8510,1.);-#8510 = DIRECTION('',(0.,-1.));-#8511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8512 = ORIENTED_EDGE('',*,*,#8513,.F.);-#8513 = EDGE_CURVE('',#8410,#8486,#8514,.T.);-#8514 = SURFACE_CURVE('',#8515,(#8519,#8526),.PCURVE_S1.);-#8515 = LINE('',#8516,#8517);-#8516 = CARTESIAN_POINT('',(-0.60954155816,5.129991319444E-02,1.5450001)- );-#8517 = VECTOR('',#8518,1.);-#8518 = DIRECTION('',(0.,-1.,0.));-#8519 = PCURVE('',#8425,#8520);-#8520 = DEFINITIONAL_REPRESENTATION('',(#8521),#8525);-#8521 = LINE('',#8522,#8523);-#8522 = CARTESIAN_POINT('',(0.,0.));-#8523 = VECTOR('',#8524,1.);-#8524 = DIRECTION('',(1.,0.));-#8525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8526 = PCURVE('',#8218,#8527);-#8527 = DEFINITIONAL_REPRESENTATION('',(#8528),#8532);-#8528 = LINE('',#8529,#8530);-#8529 = CARTESIAN_POINT('',(6.0072699653E-02,0.110537109375));-#8530 = VECTOR('',#8531,1.);-#8531 = DIRECTION('',(0.,-1.));-#8532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8533 = ADVANCED_FACE('',(#8534),#8501,.F.);-#8534 = FACE_BOUND('',#8535,.F.);-#8535 = EDGE_LOOP('',(#8536,#8537,#8560,#8588));-#8536 = ORIENTED_EDGE('',*,*,#8485,.T.);-#8537 = ORIENTED_EDGE('',*,*,#8538,.T.);-#8538 = EDGE_CURVE('',#8463,#8539,#8541,.T.);-#8539 = VERTEX_POINT('',#8540);-#8540 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5050001));-#8541 = SURFACE_CURVE('',#8542,(#8546,#8553),.PCURVE_S1.);-#8542 = LINE('',#8543,#8544);-#8543 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5050001- ));-#8544 = VECTOR('',#8545,1.);-#8545 = DIRECTION('',(-1.,0.,0.));-#8546 = PCURVE('',#8501,#8547);-#8547 = DEFINITIONAL_REPRESENTATION('',(#8548),#8552);-#8548 = LINE('',#8549,#8550);-#8549 = CARTESIAN_POINT('',(0.,-4.E-02));-#8550 = VECTOR('',#8551,1.);-#8551 = DIRECTION('',(1.,0.));-#8552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8553 = PCURVE('',#8164,#8554);-#8554 = DEFINITIONAL_REPRESENTATION('',(#8555),#8559);-#8555 = LINE('',#8556,#8557);-#8556 = CARTESIAN_POINT('',(6.0072699653E-02,0.));-#8557 = VECTOR('',#8558,1.);-#8558 = DIRECTION('',(-1.,0.));-#8559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8560 = ORIENTED_EDGE('',*,*,#8561,.F.);-#8561 = EDGE_CURVE('',#8562,#8539,#8564,.T.);-#8562 = VERTEX_POINT('',#8563);-#8563 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5450001));-#8564 = SURFACE_CURVE('',#8565,(#8569,#8576),.PCURVE_S1.);-#8565 = LINE('',#8566,#8567);-#8566 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5450001));-#8567 = VECTOR('',#8568,1.);-#8568 = DIRECTION('',(-0.,-0.,-1.));-#8569 = PCURVE('',#8501,#8570);-#8570 = DEFINITIONAL_REPRESENTATION('',(#8571),#8575);-#8571 = LINE('',#8572,#8573);-#8572 = CARTESIAN_POINT('',(1.6960720486E-02,0.));-#8573 = VECTOR('',#8574,1.);-#8574 = DIRECTION('',(0.,-1.));-#8575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8576 = PCURVE('',#8577,#8582);-#8577 = PLANE('',#8578);-#8578 = AXIS2_PLACEMENT_3D('',#8579,#8580,#8581);-#8579 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5450001));-#8580 = DIRECTION('',(1.,0.,0.));-#8581 = DIRECTION('',(-0.,1.,0.));-#8582 = DEFINITIONAL_REPRESENTATION('',(#8583),#8587);-#8583 = LINE('',#8584,#8585);-#8584 = CARTESIAN_POINT('',(0.,0.));-#8585 = VECTOR('',#8586,1.);-#8586 = DIRECTION('',(0.,-1.));-#8587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8588 = ORIENTED_EDGE('',*,*,#8589,.F.);-#8589 = EDGE_CURVE('',#8486,#8562,#8590,.T.);-#8590 = SURFACE_CURVE('',#8591,(#8595,#8602),.PCURVE_S1.);-#8591 = LINE('',#8592,#8593);-#8592 = CARTESIAN_POINT('',(-0.60954155816,-5.923719618056E-02,1.5450001- ));-#8593 = VECTOR('',#8594,1.);-#8594 = DIRECTION('',(-1.,0.,0.));-#8595 = PCURVE('',#8501,#8596);-#8596 = DEFINITIONAL_REPRESENTATION('',(#8597),#8601);-#8597 = LINE('',#8598,#8599);-#8598 = CARTESIAN_POINT('',(0.,0.));-#8599 = VECTOR('',#8600,1.);-#8600 = DIRECTION('',(1.,0.));-#8601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8602 = PCURVE('',#8218,#8603);-#8603 = DEFINITIONAL_REPRESENTATION('',(#8604),#8608);-#8604 = LINE('',#8605,#8606);-#8605 = CARTESIAN_POINT('',(6.0072699653E-02,0.));-#8606 = VECTOR('',#8607,1.);-#8607 = DIRECTION('',(-1.,0.));-#8608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8609 = ADVANCED_FACE('',(#8610),#8577,.F.);-#8610 = FACE_BOUND('',#8611,.F.);-#8611 = EDGE_LOOP('',(#8612,#8613,#8636,#8659));-#8612 = ORIENTED_EDGE('',*,*,#8561,.T.);-#8613 = ORIENTED_EDGE('',*,*,#8614,.T.);-#8614 = EDGE_CURVE('',#8539,#8615,#8617,.T.);-#8615 = VERTEX_POINT('',#8616);-#8616 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5050001- ));-#8617 = SURFACE_CURVE('',#8618,(#8622,#8629),.PCURVE_S1.);-#8618 = LINE('',#8619,#8620);-#8619 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5050001));-#8620 = VECTOR('',#8621,1.);-#8621 = DIRECTION('',(0.,1.,0.));-#8622 = PCURVE('',#8577,#8623);-#8623 = DEFINITIONAL_REPRESENTATION('',(#8624),#8628);-#8624 = LINE('',#8625,#8626);-#8625 = CARTESIAN_POINT('',(0.,-4.E-02));-#8626 = VECTOR('',#8627,1.);-#8627 = DIRECTION('',(1.,0.));-#8628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8629 = PCURVE('',#8164,#8630);-#8630 = DEFINITIONAL_REPRESENTATION('',(#8631),#8635);-#8631 = LINE('',#8632,#8633);-#8632 = CARTESIAN_POINT('',(4.3111979167E-02,0.));-#8633 = VECTOR('',#8634,1.);-#8634 = DIRECTION('',(0.,1.));-#8635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8636 = ORIENTED_EDGE('',*,*,#8637,.F.);-#8637 = EDGE_CURVE('',#8638,#8615,#8640,.T.);-#8638 = VERTEX_POINT('',#8639);-#8639 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5450001- ));-#8640 = SURFACE_CURVE('',#8641,(#8645,#8652),.PCURVE_S1.);-#8641 = LINE('',#8642,#8643);-#8642 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5450001- ));-#8643 = VECTOR('',#8644,1.);-#8644 = DIRECTION('',(-0.,-0.,-1.));-#8645 = PCURVE('',#8577,#8646);-#8646 = DEFINITIONAL_REPRESENTATION('',(#8647),#8651);+#8450 = ORIENTED_EDGE('',*,*,#8451,.T.);+#8451 = EDGE_CURVE('',#8436,#8452,#8454,.T.);+#8452 = VERTEX_POINT('',#8453);+#8453 = CARTESIAN_POINT('',(4.372909564701E-02,0.376752885913,0.955));+#8454 = SURFACE_CURVE('',#8455,(#8459),.PCURVE_S1.);+#8455 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8456,#8457,#8458),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8456 = CARTESIAN_POINT('',(1.133478767875E-02,0.366577337883,0.955));+#8457 = CARTESIAN_POINT('',(2.337799958743E-02,0.376752885913,0.955));+#8458 = CARTESIAN_POINT('',(4.372909564701E-02,0.376752885913,0.955));+#8459 = PCURVE('',#8423,#8460);+#8460 = DEFINITIONAL_REPRESENTATION('',(#8461),#8465);+#8461 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8462,#8463,#8464),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8462 = CARTESIAN_POINT('',(2.67913163316E-02,0.107358471935));+#8463 = CARTESIAN_POINT('',(1.661576830181E-02,0.119401683843));+#8464 = CARTESIAN_POINT('',(1.661576830181E-02,0.139752779903));+#8465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8466 = ORIENTED_EDGE('',*,*,#8467,.T.);+#8467 = EDGE_CURVE('',#8452,#8468,#8470,.T.);+#8468 = VERTEX_POINT('',#8469);+#8469 = CARTESIAN_POINT('',(8.481770098249E-02,0.360008313206,0.955));+#8470 = SURFACE_CURVE('',#8471,(#8475),.PCURVE_S1.);+#8471 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8472,#8473,#8474),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8472 = CARTESIAN_POINT('',(4.372909564701E-02,0.376752885913,0.955));+#8473 = CARTESIAN_POINT('',(6.98763899514E-02,0.376752885913,0.955));+#8474 = CARTESIAN_POINT('',(8.481770098249E-02,0.360008313206,0.955));+#8475 = PCURVE('',#8423,#8476);+#8476 = DEFINITIONAL_REPRESENTATION('',(#8477),#8481);+#8477 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8478,#8479,#8480),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8478 = CARTESIAN_POINT('',(1.661576830181E-02,0.139752779903));+#8479 = CARTESIAN_POINT('',(1.661576830181E-02,0.165900074207));+#8480 = CARTESIAN_POINT('',(3.336034100906E-02,0.180841385238));+#8481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8482 = ORIENTED_EDGE('',*,*,#8483,.T.);+#8483 = EDGE_CURVE('',#8468,#8484,#8486,.T.);+#8484 = VERTEX_POINT('',#8485);+#8485 = CARTESIAN_POINT('',(9.975901201357E-02,0.314025140464,0.955));+#8486 = SURFACE_CURVE('',#8487,(#8491),.PCURVE_S1.);+#8487 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8488,#8489,#8490),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8488 = CARTESIAN_POINT('',(8.481770098249E-02,0.360008313206,0.955));+#8489 = CARTESIAN_POINT('',(9.975901201357E-02,0.343263740499,0.955));+#8490 = CARTESIAN_POINT('',(9.975901201357E-02,0.314025140464,0.955));+#8491 = PCURVE('',#8423,#8492);+#8492 = DEFINITIONAL_REPRESENTATION('',(#8493),#8497);+#8493 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8494,#8495,#8496),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8494 = CARTESIAN_POINT('',(3.336034100906E-02,0.180841385238));+#8495 = CARTESIAN_POINT('',(5.010491371631E-02,0.195782696269));+#8496 = CARTESIAN_POINT('',(7.934351375127E-02,0.195782696269));+#8497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8498 = ORIENTED_EDGE('',*,*,#8499,.T.);+#8499 = EDGE_CURVE('',#8484,#8500,#8502,.T.);+#8500 = VERTEX_POINT('',#8501);+#8501 = CARTESIAN_POINT('',(9.673210848572E-02,0.287491432943,0.955));+#8502 = SURFACE_CURVE('',#8503,(#8507),.PCURVE_S1.);+#8503 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8504,#8505,#8506),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8504 = CARTESIAN_POINT('',(9.975901201357E-02,0.314025140464,0.955));+#8505 = CARTESIAN_POINT('',(9.975901201357E-02,0.300758286703,0.955));+#8506 = CARTESIAN_POINT('',(9.673210848572E-02,0.287491432943,0.955));+#8507 = PCURVE('',#8423,#8508);+#8508 = DEFINITIONAL_REPRESENTATION('',(#8509),#8513);+#8509 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8510,#8511,#8512),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8510 = CARTESIAN_POINT('',(7.934351375127E-02,0.195782696269));+#8511 = CARTESIAN_POINT('',(9.261036751163E-02,0.195782696269));+#8512 = CARTESIAN_POINT('',(0.105877221272,0.192755792742));+#8513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8514 = ORIENTED_EDGE('',*,*,#8515,.T.);+#8515 = EDGE_CURVE('',#8500,#8516,#8518,.T.);+#8516 = VERTEX_POINT('',#8517);+#8517 = CARTESIAN_POINT('',(8.778020230762E-02,0.261215334233,0.955));+#8518 = SURFACE_CURVE('',#8519,(#8523),.PCURVE_S1.);+#8519 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8520,#8521,#8522),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8520 = CARTESIAN_POINT('',(9.673210848572E-02,0.287491432943,0.955));+#8521 = CARTESIAN_POINT('',(9.370520495787E-02,0.274224579183,0.955));+#8522 = CARTESIAN_POINT('',(8.778020230762E-02,0.261215334233,0.955));+#8523 = PCURVE('',#8423,#8524);+#8524 = DEFINITIONAL_REPRESENTATION('',(#8525),#8529);+#8525 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8526,#8527,#8528),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8526 = CARTESIAN_POINT('',(0.105877221272,0.192755792742));+#8527 = CARTESIAN_POINT('',(0.119144075032,0.189728889214));+#8528 = CARTESIAN_POINT('',(0.132153319982,0.183803886563));+#8529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8530 = ORIENTED_EDGE('',*,*,#8531,.T.);+#8531 = EDGE_CURVE('',#8516,#8532,#8534,.T.);+#8532 = VERTEX_POINT('',#8533);+#8533 = CARTESIAN_POINT('',(5.068453354079E-02,0.261215334233,0.955));+#8534 = SURFACE_CURVE('',#8535,(#8539),.PCURVE_S1.);+#8535 = LINE('',#8536,#8537);+#8536 = CARTESIAN_POINT('',(8.778020230762E-02,0.261215334233,0.955));+#8537 = VECTOR('',#8538,1.);+#8538 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#8539 = PCURVE('',#8423,#8540);+#8540 = DEFINITIONAL_REPRESENTATION('',(#8541),#8545);+#8541 = LINE('',#8542,#8543);+#8542 = CARTESIAN_POINT('',(0.132153319982,0.183803886563));+#8543 = VECTOR('',#8544,1.);+#8544 = DIRECTION('',(0.,-1.));+#8545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8546 = ORIENTED_EDGE('',*,*,#8547,.T.);+#8547 = EDGE_CURVE('',#8532,#8548,#8550,.T.);+#8548 = VERTEX_POINT('',#8549);+#8549 = CARTESIAN_POINT('',(6.382258289571E-02,0.286074584483,0.955));+#8550 = SURFACE_CURVE('',#8551,(#8555),.PCURVE_S1.);+#8551 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8552,#8553,#8554),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8552 = CARTESIAN_POINT('',(5.068453354079E-02,0.261215334233,0.955));+#8553 = CARTESIAN_POINT('',(5.931442870529E-02,0.27345175275,0.955));+#8554 = CARTESIAN_POINT('',(6.382258289571E-02,0.286074584483,0.955));+#8555 = PCURVE('',#8423,#8556);+#8556 = DEFINITIONAL_REPRESENTATION('',(#8557),#8561);+#8557 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8558,#8559,#8560),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8558 = CARTESIAN_POINT('',(0.132153319982,0.146708217797));+#8559 = CARTESIAN_POINT('',(0.119916901465,0.155338112961));+#8560 = CARTESIAN_POINT('',(0.107294069732,0.159846267152));+#8561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8562 = ORIENTED_EDGE('',*,*,#8563,.T.);+#8563 = EDGE_CURVE('',#8548,#8564,#8566,.T.);+#8564 = VERTEX_POINT('',#8565);+#8565 = CARTESIAN_POINT('',(6.833073708612E-02,0.311062639139,0.955));+#8566 = SURFACE_CURVE('',#8567,(#8571),.PCURVE_S1.);+#8567 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8568,#8569,#8570),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8568 = CARTESIAN_POINT('',(6.382258289571E-02,0.286074584483,0.955));+#8569 = CARTESIAN_POINT('',(6.833073708612E-02,0.298697416216,0.955));+#8570 = CARTESIAN_POINT('',(6.833073708612E-02,0.311062639139,0.955));+#8571 = PCURVE('',#8423,#8572);+#8572 = DEFINITIONAL_REPRESENTATION('',(#8573),#8577);+#8573 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8574,#8575,#8576),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8574 = CARTESIAN_POINT('',(0.107294069732,0.159846267152));+#8575 = CARTESIAN_POINT('',(9.467123799868E-02,0.164354421342));+#8576 = CARTESIAN_POINT('',(8.23060150764E-02,0.164354421342));+#8577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8578 = ORIENTED_EDGE('',*,*,#8579,.T.);+#8579 = EDGE_CURVE('',#8564,#8580,#8582,.T.);+#8580 = VERTEX_POINT('',#8581);+#8581 = CARTESIAN_POINT('',(6.279214765218E-02,0.332186561631,0.955));+#8582 = SURFACE_CURVE('',#8583,(#8587),.PCURVE_S1.);+#8583 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8584,#8585,#8586),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8584 = CARTESIAN_POINT('',(6.833073708612E-02,0.311062639139,0.955));+#8585 = CARTESIAN_POINT('',(6.833073708612E-02,0.324844710521,0.955));+#8586 = CARTESIAN_POINT('',(6.279214765218E-02,0.332186561631,0.955));+#8587 = PCURVE('',#8423,#8588);+#8588 = DEFINITIONAL_REPRESENTATION('',(#8589),#8593);+#8589 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8590,#8591,#8592),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8590 = CARTESIAN_POINT('',(8.23060150764E-02,0.164354421342));+#8591 = CARTESIAN_POINT('',(6.852394369428E-02,0.164354421342));+#8592 = CARTESIAN_POINT('',(6.118209258418E-02,0.158815831908));+#8593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8594 = ORIENTED_EDGE('',*,*,#8595,.T.);+#8595 = EDGE_CURVE('',#8580,#8596,#8598,.T.);+#8596 = VERTEX_POINT('',#8597);+#8597 = CARTESIAN_POINT('',(4.694920578302E-02,0.339528412741,0.955));+#8598 = SURFACE_CURVE('',#8599,(#8603),.PCURVE_S1.);+#8599 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8600,#8601,#8602),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8600 = CARTESIAN_POINT('',(6.279214765218E-02,0.332186561631,0.955));+#8601 = CARTESIAN_POINT('',(5.725355821825E-02,0.339528412741,0.955));+#8602 = CARTESIAN_POINT('',(4.694920578302E-02,0.339528412741,0.955));+#8603 = PCURVE('',#8423,#8604);+#8604 = DEFINITIONAL_REPRESENTATION('',(#8605),#8609);+#8605 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8606,#8607,#8608),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8606 = CARTESIAN_POINT('',(6.118209258418E-02,0.158815831908));+#8607 = CARTESIAN_POINT('',(5.384024147408E-02,0.153277242474));+#8608 = CARTESIAN_POINT('',(5.384024147408E-02,0.142972890039));+#8609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8610 = ORIENTED_EDGE('',*,*,#8611,.T.);+#8611 = EDGE_CURVE('',#8596,#8612,#8614,.T.);+#8612 = VERTEX_POINT('',#8613);+#8613 = CARTESIAN_POINT('',(3.374675422538E-02,0.334183029915,0.955));+#8614 = SURFACE_CURVE('',#8615,(#8619),.PCURVE_S1.);+#8615 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8616,#8617,#8618),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8616 = CARTESIAN_POINT('',(4.694920578302E-02,0.339528412741,0.955));+#8617 = CARTESIAN_POINT('',(3.896333264571E-02,0.339528412741,0.955));+#8618 = CARTESIAN_POINT('',(3.374675422538E-02,0.334183029915,0.955));+#8619 = PCURVE('',#8423,#8620);+#8620 = DEFINITIONAL_REPRESENTATION('',(#8621),#8625);+#8621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8622,#8623,#8624),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8622 = CARTESIAN_POINT('',(5.384024147408E-02,0.142972890039));+#8623 = CARTESIAN_POINT('',(5.384024147408E-02,0.134987016902));+#8624 = CARTESIAN_POINT('',(5.918562429985E-02,0.129770438481));+#8625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8626 = ORIENTED_EDGE('',*,*,#8627,.T.);+#8627 = EDGE_CURVE('',#8612,#8628,#8630,.T.);+#8628 = VERTEX_POINT('',#8629);+#8629 = CARTESIAN_POINT('',(2.221875993847E-02,0.311835465571,0.955));+#8630 = SURFACE_CURVE('',#8631,(#8635),.PCURVE_S1.);+#8631 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8632,#8633,#8634),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8632 = CARTESIAN_POINT('',(3.374675422538E-02,0.334183029915,0.955));+#8633 = CARTESIAN_POINT('',(2.853017580504E-02,0.328837647089,0.955));+#8634 = CARTESIAN_POINT('',(2.221875993846E-02,0.311835465571,0.955));+#8635 = PCURVE('',#8423,#8636);+#8636 = DEFINITIONAL_REPRESENTATION('',(#8637),#8641);+#8637 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8638,#8639,#8640),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8638 = CARTESIAN_POINT('',(5.918562429985E-02,0.129770438481));+#8639 = CARTESIAN_POINT('',(6.453100712563E-02,0.124553860061));+#8640 = CARTESIAN_POINT('',(8.153318864376E-02,0.118242444194));+#8641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8642 = ORIENTED_EDGE('',*,*,#8643,.T.);+#8643 = EDGE_CURVE('',#8628,#8644,#8646,.T.);+#8644 = VERTEX_POINT('',#8645);+#8645 = CARTESIAN_POINT('',(1.603614847733E-02,0.29547730608,0.955));+#8646 = SURFACE_CURVE('',#8647,(#8651),.PCURVE_S1.); #8647 = LINE('',#8648,#8649);-#8648 = CARTESIAN_POINT('',(0.110537109375,0.));+#8648 = CARTESIAN_POINT('',(2.221875993846E-02,0.311835465571,0.955)); #8649 = VECTOR('',#8650,1.);-#8650 = DIRECTION('',(0.,-1.));-#8651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8652 = PCURVE('',#8136,#8653);-#8653 = DEFINITIONAL_REPRESENTATION('',(#8654),#8658);-#8654 = LINE('',#8655,#8656);-#8655 = CARTESIAN_POINT('',(0.,0.));-#8656 = VECTOR('',#8657,1.);-#8657 = DIRECTION('',(0.,-1.));-#8658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8659 = ORIENTED_EDGE('',*,*,#8660,.F.);-#8660 = EDGE_CURVE('',#8562,#8638,#8661,.T.);-#8661 = SURFACE_CURVE('',#8662,(#8666,#8673),.PCURVE_S1.);-#8662 = LINE('',#8663,#8664);-#8663 = CARTESIAN_POINT('',(-0.626502278646,-5.923719618056E-02,- 1.5450001));-#8664 = VECTOR('',#8665,1.);-#8665 = DIRECTION('',(0.,1.,0.));-#8666 = PCURVE('',#8577,#8667);-#8667 = DEFINITIONAL_REPRESENTATION('',(#8668),#8672);-#8668 = LINE('',#8669,#8670);-#8669 = CARTESIAN_POINT('',(0.,0.));-#8670 = VECTOR('',#8671,1.);-#8671 = DIRECTION('',(1.,0.));-#8672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8673 = PCURVE('',#8218,#8674);-#8674 = DEFINITIONAL_REPRESENTATION('',(#8675),#8679);-#8675 = LINE('',#8676,#8677);-#8676 = CARTESIAN_POINT('',(4.3111979167E-02,0.));-#8677 = VECTOR('',#8678,1.);-#8678 = DIRECTION('',(0.,1.));-#8679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8680 = ADVANCED_FACE('',(#8681),#8136,.F.);-#8681 = FACE_BOUND('',#8682,.F.);-#8682 = EDGE_LOOP('',(#8683,#8684,#8705,#8706));-#8683 = ORIENTED_EDGE('',*,*,#8637,.T.);-#8684 = ORIENTED_EDGE('',*,*,#8685,.T.);-#8685 = EDGE_CURVE('',#8615,#8116,#8686,.T.);-#8686 = SURFACE_CURVE('',#8687,(#8691,#8698),.PCURVE_S1.);-#8687 = LINE('',#8688,#8689);-#8688 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5050001- ));-#8689 = VECTOR('',#8690,1.);-#8690 = DIRECTION('',(-1.,0.,0.));-#8691 = PCURVE('',#8136,#8692);-#8692 = DEFINITIONAL_REPRESENTATION('',(#8693),#8697);-#8693 = LINE('',#8694,#8695);-#8694 = CARTESIAN_POINT('',(0.,-4.E-02));-#8695 = VECTOR('',#8696,1.);-#8696 = DIRECTION('',(1.,0.));-#8697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8698 = PCURVE('',#8164,#8699);-#8699 = DEFINITIONAL_REPRESENTATION('',(#8700),#8704);-#8700 = LINE('',#8701,#8702);-#8701 = CARTESIAN_POINT('',(4.3111979167E-02,0.110537109375));-#8702 = VECTOR('',#8703,1.);-#8703 = DIRECTION('',(-1.,0.));-#8704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8705 = ORIENTED_EDGE('',*,*,#8113,.F.);-#8706 = ORIENTED_EDGE('',*,*,#8707,.F.);-#8707 = EDGE_CURVE('',#8638,#8114,#8708,.T.);-#8708 = SURFACE_CURVE('',#8709,(#8713,#8720),.PCURVE_S1.);-#8709 = LINE('',#8710,#8711);-#8710 = CARTESIAN_POINT('',(-0.626502278646,5.129991319444E-02,1.5450001- ));-#8711 = VECTOR('',#8712,1.);-#8712 = DIRECTION('',(-1.,0.,0.));-#8713 = PCURVE('',#8136,#8714);-#8714 = DEFINITIONAL_REPRESENTATION('',(#8715),#8719);-#8715 = LINE('',#8716,#8717);-#8716 = CARTESIAN_POINT('',(0.,0.));-#8717 = VECTOR('',#8718,1.);-#8718 = DIRECTION('',(1.,0.));-#8719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8720 = PCURVE('',#8218,#8721);-#8721 = DEFINITIONAL_REPRESENTATION('',(#8722),#8726);-#8722 = LINE('',#8723,#8724);-#8723 = CARTESIAN_POINT('',(4.3111979167E-02,0.110537109375));-#8724 = VECTOR('',#8725,1.);-#8725 = DIRECTION('',(-1.,0.));-#8726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8727 = ADVANCED_FACE('',(#8728),#8218,.T.);-#8728 = FACE_BOUND('',#8729,.F.);-#8729 = EDGE_LOOP('',(#8730,#8731,#8732,#8733,#8734,#8735,#8736,#8737));-#8730 = ORIENTED_EDGE('',*,*,#8204,.T.);-#8731 = ORIENTED_EDGE('',*,*,#8285,.T.);-#8732 = ORIENTED_EDGE('',*,*,#8361,.T.);-#8733 = ORIENTED_EDGE('',*,*,#8437,.T.);-#8734 = ORIENTED_EDGE('',*,*,#8513,.T.);-#8735 = ORIENTED_EDGE('',*,*,#8589,.T.);-#8736 = ORIENTED_EDGE('',*,*,#8660,.T.);-#8737 = ORIENTED_EDGE('',*,*,#8707,.T.);-#8738 = ADVANCED_FACE('',(#8739),#8164,.F.);-#8739 = FACE_BOUND('',#8740,.T.);-#8740 = EDGE_LOOP('',(#8741,#8742,#8743,#8744,#8745,#8746,#8747,#8748));-#8741 = ORIENTED_EDGE('',*,*,#8148,.T.);-#8742 = ORIENTED_EDGE('',*,*,#8234,.T.);-#8743 = ORIENTED_EDGE('',*,*,#8310,.T.);-#8744 = ORIENTED_EDGE('',*,*,#8386,.T.);-#8745 = ORIENTED_EDGE('',*,*,#8462,.T.);-#8746 = ORIENTED_EDGE('',*,*,#8538,.T.);-#8747 = ORIENTED_EDGE('',*,*,#8614,.T.);-#8748 = ORIENTED_EDGE('',*,*,#8685,.T.);-#8749 = MANIFOLD_SOLID_BREP('',#8750);-#8750 = CLOSED_SHELL('',(#8751,#8873,#8949,#9025,#9103,#9181,#9259,#9337- ,#9415,#9493,#9571,#9649,#9725,#9803,#9881,#9959,#10037,#10115,- #10193,#10271,#10342,#10389,#10413));-#8751 = ADVANCED_FACE('',(#8752),#8766,.F.);-#8752 = FACE_BOUND('',#8753,.F.);-#8753 = EDGE_LOOP('',(#8754,#8791,#8819,#8847));+#8650 = DIRECTION('',(-0.353543800234,-0.935417971452,0.));+#8651 = PCURVE('',#8423,#8652);+#8652 = DEFINITIONAL_REPRESENTATION('',(#8653),#8657);+#8653 = LINE('',#8654,#8655);+#8654 = CARTESIAN_POINT('',(8.153318864376E-02,0.118242444194));+#8655 = VECTOR('',#8656,1.);+#8656 = DIRECTION('',(0.935417971452,-0.353543800234));+#8657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8658 = ORIENTED_EDGE('',*,*,#8659,.T.);+#8659 = EDGE_CURVE('',#8644,#8660,#8662,.T.);+#8660 = VERTEX_POINT('',#8661);+#8661 = CARTESIAN_POINT('',(-6.504622474739E-03,0.261344138639,0.955));+#8662 = SURFACE_CURVE('',#8663,(#8667),.PCURVE_S1.);+#8663 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8664,#8665,#8666),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8664 = CARTESIAN_POINT('',(1.603614847733E-02,0.29547730608,0.955));+#8665 = CARTESIAN_POINT('',(7.535057718262E-03,0.272292513101,0.955));+#8666 = CARTESIAN_POINT('',(-6.504622474739E-03,0.261344138639,0.955));+#8667 = PCURVE('',#8423,#8668);+#8668 = DEFINITIONAL_REPRESENTATION('',(#8669),#8673);+#8669 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8670,#8671,#8672),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8670 = CARTESIAN_POINT('',(9.789134813469E-02,0.112059832733));+#8671 = CARTESIAN_POINT('',(0.121076141114,0.103558741974));+#8672 = CARTESIAN_POINT('',(0.132024515576,8.951906178106E-02));+#8673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8674 = ORIENTED_EDGE('',*,*,#8675,.T.);+#8675 = EDGE_CURVE('',#8660,#8676,#8678,.T.);+#8676 = VERTEX_POINT('',#8677);+#8677 = CARTESIAN_POINT('',(-4.192583397084E-02,0.250395764176,0.955));+#8678 = SURFACE_CURVE('',#8679,(#8683),.PCURVE_S1.);+#8679 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8680,#8681,#8682),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8680 = CARTESIAN_POINT('',(-6.504622474739E-03,0.261344138639,0.955));+#8681 = CARTESIAN_POINT('',(-2.054430266774E-02,0.250395764176,0.955));+#8682 = CARTESIAN_POINT('',(-4.192583397084E-02,0.250395764176,0.955));+#8683 = PCURVE('',#8423,#8684);+#8684 = DEFINITIONAL_REPRESENTATION('',(#8685),#8689);+#8685 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8686,#8687,#8688),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8686 = CARTESIAN_POINT('',(0.132024515576,8.951906178106E-02));+#8687 = CARTESIAN_POINT('',(0.142972890039,7.547938158806E-02));+#8688 = CARTESIAN_POINT('',(0.142972890039,5.409785028496E-02));+#8689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8690 = ORIENTED_EDGE('',*,*,#8691,.T.);+#8691 = EDGE_CURVE('',#8676,#8692,#8694,.T.);+#8692 = VERTEX_POINT('',#8693);+#8693 = CARTESIAN_POINT('',(-8.539732080697E-02,0.267591152302,0.955));+#8694 = SURFACE_CURVE('',#8695,(#8699),.PCURVE_S1.);+#8695 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8696,#8697,#8698),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8696 = CARTESIAN_POINT('',(-4.192583397084E-02,0.250395764176,0.955));+#8697 = CARTESIAN_POINT('',(-7.103562960037E-02,0.250395764176,0.955));+#8698 = CARTESIAN_POINT('',(-8.539732080697E-02,0.267591152302,0.955));+#8699 = PCURVE('',#8423,#8700);+#8700 = DEFINITIONAL_REPRESENTATION('',(#8701),#8705);+#8701 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8702,#8703,#8704),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8702 = CARTESIAN_POINT('',(0.142972890039,5.409785028496E-02));+#8703 = CARTESIAN_POINT('',(0.142972890039,2.498805465543E-02));+#8704 = CARTESIAN_POINT('',(0.125777501913,1.062636344883E-02));+#8705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8706 = ORIENTED_EDGE('',*,*,#8707,.T.);+#8707 = EDGE_CURVE('',#8692,#8708,#8710,.T.);+#8708 = VERTEX_POINT('',#8709);+#8709 = CARTESIAN_POINT('',(-9.975901201357E-02,0.319563729898,0.955));+#8710 = SURFACE_CURVE('',#8711,(#8715),.PCURVE_S1.);+#8711 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8712,#8713,#8714),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8712 = CARTESIAN_POINT('',(-8.539732080697E-02,0.267591152302,0.955));+#8713 = CARTESIAN_POINT('',(-9.975901201357E-02,0.284786540429,0.955));+#8714 = CARTESIAN_POINT('',(-9.975901201357E-02,0.319563729898,0.955));+#8715 = PCURVE('',#8423,#8716);+#8716 = DEFINITIONAL_REPRESENTATION('',(#8717),#8721);+#8717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8718,#8719,#8720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8718 = CARTESIAN_POINT('',(0.125777501913,1.062636344883E-02));+#8719 = CARTESIAN_POINT('',(0.108582113786,-3.735327757771E-03));+#8720 = CARTESIAN_POINT('',(7.380492431734E-02,-3.735327757771E-03));+#8721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8722 = ORIENTED_EDGE('',*,*,#8723,.T.);+#8723 = EDGE_CURVE('',#8708,#8724,#8726,.T.);+#8724 = VERTEX_POINT('',#8725);+#8725 = CARTESIAN_POINT('',(-9.63456952694E-02,0.348222710108,0.955));+#8726 = SURFACE_CURVE('',#8727,(#8731),.PCURVE_S1.);+#8727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8728,#8729,#8730),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8728 = CARTESIAN_POINT('',(-9.975901201357E-02,0.319563729898,0.955));+#8729 = CARTESIAN_POINT('',(-9.975901201357E-02,0.333861018901,0.955));+#8730 = CARTESIAN_POINT('',(-9.63456952694E-02,0.348222710108,0.955));+#8731 = PCURVE('',#8423,#8732);+#8732 = DEFINITIONAL_REPRESENTATION('',(#8733),#8737);+#8733 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8734,#8735,#8736),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8734 = CARTESIAN_POINT('',(7.380492431734E-02,-3.735327757771E-03));+#8735 = CARTESIAN_POINT('',(5.950763531345E-02,-3.735327757771E-03));+#8736 = CARTESIAN_POINT('',(4.514594410685E-02,-3.220110136009E-04));+#8737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8738 = ORIENTED_EDGE('',*,*,#8739,.T.);+#8739 = EDGE_CURVE('',#8724,#8740,#8742,.T.);+#8740 = VERTEX_POINT('',#8741);+#8741 = CARTESIAN_POINT('',(-8.623454944233E-02,0.37598005948,0.955));+#8742 = SURFACE_CURVE('',#8743,(#8747),.PCURVE_S1.);+#8743 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8744,#8745,#8746),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8744 = CARTESIAN_POINT('',(-9.63456952694E-02,0.348222710108,0.955));+#8745 = CARTESIAN_POINT('',(-9.293237852523E-02,0.362584401315,0.955));+#8746 = CARTESIAN_POINT('',(-8.623454944233E-02,0.37598005948,0.955));+#8747 = PCURVE('',#8423,#8748);+#8748 = DEFINITIONAL_REPRESENTATION('',(#8749),#8753);+#8749 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8750,#8751,#8752),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8750 = CARTESIAN_POINT('',(4.514594410685E-02,-3.220110136009E-04));+#8751 = CARTESIAN_POINT('',(3.078425290025E-02,3.091305730569E-03));+#8752 = CARTESIAN_POINT('',(1.738859473445E-02,9.789134813468E-03));+#8753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) ); #8754 = ORIENTED_EDGE('',*,*,#8755,.T.);-#8755 = EDGE_CURVE('',#8756,#8758,#8760,.T.);+#8755 = EDGE_CURVE('',#8740,#8756,#8758,.T.); #8756 = VERTEX_POINT('',#8757);-#8757 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5450001));-#8758 = VERTEX_POINT('',#8759);-#8759 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5050001));-#8760 = SURFACE_CURVE('',#8761,(#8765,#8777),.PCURVE_S1.);-#8761 = LINE('',#8762,#8763);-#8762 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5450001));-#8763 = VECTOR('',#8764,1.);-#8764 = DIRECTION('',(-0.,-0.,-1.));-#8765 = PCURVE('',#8766,#8771);-#8766 = PLANE('',#8767);-#8767 = AXIS2_PLACEMENT_3D('',#8768,#8769,#8770);-#8768 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5450001));-#8769 = DIRECTION('',(0.,-1.,0.));-#8770 = DIRECTION('',(1.,0.,0.));-#8771 = DEFINITIONAL_REPRESENTATION('',(#8772),#8776);-#8772 = LINE('',#8773,#8774);-#8773 = CARTESIAN_POINT('',(0.,0.));-#8774 = VECTOR('',#8775,1.);-#8775 = DIRECTION('',(0.,-1.));-#8776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8777 = PCURVE('',#8778,#8785);-#8778 = SURFACE_OF_LINEAR_EXTRUSION('',#8779,#8783);-#8779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8780,#8781,#8782),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#8780 = CARTESIAN_POINT('',(-0.5083203125,-1.629231770833E-02,1.5450001)- );-#8781 = CARTESIAN_POINT('',(-0.517218424479,-2.590060763889E-02,- 1.5450001));-#8782 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5450001));-#8783 = VECTOR('',#8784,1.);-#8784 = DIRECTION('',(0.,0.,1.));-#8785 = DEFINITIONAL_REPRESENTATION('',(#8786),#8790);-#8786 = LINE('',#8787,#8788);-#8787 = CARTESIAN_POINT('',(1.,0.));-#8788 = VECTOR('',#8789,1.);-#8789 = DIRECTION('',(0.,-1.));-#8790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8791 = ORIENTED_EDGE('',*,*,#8792,.T.);-#8792 = EDGE_CURVE('',#8758,#8793,#8795,.T.);-#8793 = VERTEX_POINT('',#8794);-#8794 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5050001));-#8795 = SURFACE_CURVE('',#8796,(#8800,#8807),.PCURVE_S1.);-#8796 = LINE('',#8797,#8798);-#8797 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5050001));-#8798 = VECTOR('',#8799,1.);-#8799 = DIRECTION('',(1.,0.,0.));-#8800 = PCURVE('',#8766,#8801);-#8801 = DEFINITIONAL_REPRESENTATION('',(#8802),#8806);-#8802 = LINE('',#8803,#8804);-#8803 = CARTESIAN_POINT('',(0.,-4.E-02));-#8804 = VECTOR('',#8805,1.);-#8805 = DIRECTION('',(1.,0.));-#8806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8807 = PCURVE('',#8808,#8813);-#8808 = PLANE('',#8809);-#8809 = AXIS2_PLACEMENT_3D('',#8810,#8811,#8812);-#8810 = CARTESIAN_POINT('',(-0.566596679688,-5.923719618056E-02,- 1.5050001));-#8811 = DIRECTION('',(0.,0.,1.));-#8812 = DIRECTION('',(1.,0.,-0.));-#8813 = DEFINITIONAL_REPRESENTATION('',(#8814),#8818);-#8814 = LINE('',#8815,#8816);-#8815 = CARTESIAN_POINT('',(3.1164279514E-02,1.420355902778E-02));-#8816 = VECTOR('',#8817,1.);-#8817 = DIRECTION('',(1.,0.));-#8818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8819 = ORIENTED_EDGE('',*,*,#8820,.F.);-#8820 = EDGE_CURVE('',#8821,#8793,#8823,.T.);-#8821 = VERTEX_POINT('',#8822);-#8822 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5450001));-#8823 = SURFACE_CURVE('',#8824,(#8828,#8835),.PCURVE_S1.);-#8824 = LINE('',#8825,#8826);-#8825 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5450001));-#8826 = VECTOR('',#8827,1.);-#8827 = DIRECTION('',(-0.,-0.,-1.));-#8828 = PCURVE('',#8766,#8829);-#8829 = DEFINITIONAL_REPRESENTATION('',(#8830),#8834);-#8830 = LINE('',#8831,#8832);-#8831 = CARTESIAN_POINT('',(5.7315538195E-02,0.));-#8832 = VECTOR('',#8833,1.);-#8833 = DIRECTION('',(0.,-1.));-#8834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8835 = PCURVE('',#8836,#8841);-#8836 = PLANE('',#8837);-#8837 = AXIS2_PLACEMENT_3D('',#8838,#8839,#8840);-#8838 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5450001));-#8839 = DIRECTION('',(-1.,0.,0.));-#8840 = DIRECTION('',(0.,-1.,0.));-#8841 = DEFINITIONAL_REPRESENTATION('',(#8842),#8846);-#8842 = LINE('',#8843,#8844);-#8843 = CARTESIAN_POINT('',(0.,0.));-#8844 = VECTOR('',#8845,1.);-#8845 = DIRECTION('',(0.,-1.));-#8846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8847 = ORIENTED_EDGE('',*,*,#8848,.F.);-#8848 = EDGE_CURVE('',#8756,#8821,#8849,.T.);-#8849 = SURFACE_CURVE('',#8850,(#8854,#8861),.PCURVE_S1.);-#8850 = LINE('',#8851,#8852);-#8851 = CARTESIAN_POINT('',(-0.535432400174,-4.503363715278E-02,- 1.5450001));-#8852 = VECTOR('',#8853,1.);-#8853 = DIRECTION('',(1.,0.,0.));-#8854 = PCURVE('',#8766,#8855);-#8855 = DEFINITIONAL_REPRESENTATION('',(#8856),#8860);-#8856 = LINE('',#8857,#8858);-#8857 = CARTESIAN_POINT('',(0.,0.));-#8858 = VECTOR('',#8859,1.);-#8859 = DIRECTION('',(1.,0.));-#8860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8861 = PCURVE('',#8862,#8867);-#8862 = PLANE('',#8863);-#8863 = AXIS2_PLACEMENT_3D('',#8864,#8865,#8866);-#8864 = CARTESIAN_POINT('',(-0.566596679688,-5.923719618056E-02,- 1.5450001));-#8865 = DIRECTION('',(0.,0.,1.));-#8866 = DIRECTION('',(1.,0.,-0.));-#8867 = DEFINITIONAL_REPRESENTATION('',(#8868),#8872);-#8868 = LINE('',#8869,#8870);-#8869 = CARTESIAN_POINT('',(3.1164279514E-02,1.420355902778E-02));-#8870 = VECTOR('',#8871,1.);-#8871 = DIRECTION('',(1.,0.));-#8872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8873 = ADVANCED_FACE('',(#8874),#8836,.F.);-#8874 = FACE_BOUND('',#8875,.F.);-#8875 = EDGE_LOOP('',(#8876,#8877,#8900,#8928));-#8876 = ORIENTED_EDGE('',*,*,#8820,.T.);-#8877 = ORIENTED_EDGE('',*,*,#8878,.T.);-#8878 = EDGE_CURVE('',#8793,#8879,#8881,.T.);-#8879 = VERTEX_POINT('',#8880);-#8880 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5050001));-#8881 = SURFACE_CURVE('',#8882,(#8886,#8893),.PCURVE_S1.);-#8882 = LINE('',#8883,#8884);-#8883 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5050001));-#8884 = VECTOR('',#8885,1.);-#8885 = DIRECTION('',(0.,-1.,0.));-#8886 = PCURVE('',#8836,#8887);-#8887 = DEFINITIONAL_REPRESENTATION('',(#8888),#8892);-#8888 = LINE('',#8889,#8890);-#8889 = CARTESIAN_POINT('',(0.,-4.E-02));-#8890 = VECTOR('',#8891,1.);-#8891 = DIRECTION('',(1.,0.));-#8892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8893 = PCURVE('',#8808,#8894);-#8894 = DEFINITIONAL_REPRESENTATION('',(#8895),#8899);-#8895 = LINE('',#8896,#8897);-#8896 = CARTESIAN_POINT('',(8.8479817709E-02,1.420355902778E-02));-#8897 = VECTOR('',#8898,1.);-#8898 = DIRECTION('',(0.,-1.));-#8899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8900 = ORIENTED_EDGE('',*,*,#8901,.F.);-#8901 = EDGE_CURVE('',#8902,#8879,#8904,.T.);-#8902 = VERTEX_POINT('',#8903);-#8903 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5450001));-#8904 = SURFACE_CURVE('',#8905,(#8909,#8916),.PCURVE_S1.);-#8905 = LINE('',#8906,#8907);-#8906 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5450001));-#8907 = VECTOR('',#8908,1.);-#8908 = DIRECTION('',(-0.,-0.,-1.));-#8909 = PCURVE('',#8836,#8910);-#8910 = DEFINITIONAL_REPRESENTATION('',(#8911),#8915);-#8911 = LINE('',#8912,#8913);-#8912 = CARTESIAN_POINT('',(1.420355902778E-02,0.));-#8913 = VECTOR('',#8914,1.);-#8914 = DIRECTION('',(0.,-1.));-#8915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8916 = PCURVE('',#8917,#8922);-#8917 = PLANE('',#8918);-#8918 = AXIS2_PLACEMENT_3D('',#8919,#8920,#8921);-#8919 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5450001));-#8920 = DIRECTION('',(0.,1.,0.));-#8921 = DIRECTION('',(-1.,0.,0.));-#8922 = DEFINITIONAL_REPRESENTATION('',(#8923),#8927);-#8923 = LINE('',#8924,#8925);-#8924 = CARTESIAN_POINT('',(0.,0.));-#8925 = VECTOR('',#8926,1.);-#8926 = DIRECTION('',(0.,-1.));-#8927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8928 = ORIENTED_EDGE('',*,*,#8929,.F.);-#8929 = EDGE_CURVE('',#8821,#8902,#8930,.T.);-#8930 = SURFACE_CURVE('',#8931,(#8935,#8942),.PCURVE_S1.);-#8931 = LINE('',#8932,#8933);-#8932 = CARTESIAN_POINT('',(-0.478116861979,-4.503363715278E-02,- 1.5450001));-#8933 = VECTOR('',#8934,1.);-#8934 = DIRECTION('',(0.,-1.,0.));-#8935 = PCURVE('',#8836,#8936);-#8936 = DEFINITIONAL_REPRESENTATION('',(#8937),#8941);-#8937 = LINE('',#8938,#8939);-#8938 = CARTESIAN_POINT('',(0.,0.));-#8939 = VECTOR('',#8940,1.);-#8940 = DIRECTION('',(1.,0.));-#8941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8942 = PCURVE('',#8862,#8943);-#8943 = DEFINITIONAL_REPRESENTATION('',(#8944),#8948);-#8944 = LINE('',#8945,#8946);-#8945 = CARTESIAN_POINT('',(8.8479817709E-02,1.420355902778E-02));-#8946 = VECTOR('',#8947,1.);-#8947 = DIRECTION('',(0.,-1.));-#8948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8949 = ADVANCED_FACE('',(#8950),#8917,.F.);-#8950 = FACE_BOUND('',#8951,.F.);-#8951 = EDGE_LOOP('',(#8952,#8953,#8976,#9004));-#8952 = ORIENTED_EDGE('',*,*,#8901,.T.);-#8953 = ORIENTED_EDGE('',*,*,#8954,.T.);-#8954 = EDGE_CURVE('',#8879,#8955,#8957,.T.);-#8955 = VERTEX_POINT('',#8956);-#8956 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5050001- ));-#8957 = SURFACE_CURVE('',#8958,(#8962,#8969),.PCURVE_S1.);-#8958 = LINE('',#8959,#8960);-#8959 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5050001));-#8960 = VECTOR('',#8961,1.);-#8961 = DIRECTION('',(-1.,0.,0.));-#8962 = PCURVE('',#8917,#8963);-#8963 = DEFINITIONAL_REPRESENTATION('',(#8964),#8968);-#8964 = LINE('',#8965,#8966);-#8965 = CARTESIAN_POINT('',(0.,-4.E-02));-#8966 = VECTOR('',#8967,1.);-#8967 = DIRECTION('',(1.,0.));-#8968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8969 = PCURVE('',#8808,#8970);-#8970 = DEFINITIONAL_REPRESENTATION('',(#8971),#8975);-#8971 = LINE('',#8972,#8973);-#8972 = CARTESIAN_POINT('',(8.8479817709E-02,0.));-#8973 = VECTOR('',#8974,1.);-#8974 = DIRECTION('',(-1.,0.));-#8975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8976 = ORIENTED_EDGE('',*,*,#8977,.F.);-#8977 = EDGE_CURVE('',#8978,#8955,#8980,.T.);-#8978 = VERTEX_POINT('',#8979);-#8979 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5450001- ));-#8980 = SURFACE_CURVE('',#8981,(#8985,#8992),.PCURVE_S1.);-#8981 = LINE('',#8982,#8983);-#8982 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5450001- ));-#8983 = VECTOR('',#8984,1.);-#8984 = DIRECTION('',(-0.,-0.,-1.));-#8985 = PCURVE('',#8917,#8986);-#8986 = DEFINITIONAL_REPRESENTATION('',(#8987),#8991);-#8987 = LINE('',#8988,#8989);-#8988 = CARTESIAN_POINT('',(7.5780164931E-02,0.));-#8989 = VECTOR('',#8990,1.);-#8990 = DIRECTION('',(0.,-1.));-#8991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#8992 = PCURVE('',#8993,#8998);-#8993 = PLANE('',#8994);-#8994 = AXIS2_PLACEMENT_3D('',#8995,#8996,#8997);-#8995 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5450001- ));-#8996 = DIRECTION('',(1.,0.,0.));-#8997 = DIRECTION('',(-0.,1.,0.));+#8757 = CARTESIAN_POINT('',(-4.694920578302E-02,0.37598005948,0.955));+#8758 = SURFACE_CURVE('',#8759,(#8763),.PCURVE_S1.);+#8759 = LINE('',#8760,#8761);+#8760 = CARTESIAN_POINT('',(-8.623454944233E-02,0.37598005948,0.955));+#8761 = VECTOR('',#8762,1.);+#8762 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#8763 = PCURVE('',#8423,#8764);+#8764 = DEFINITIONAL_REPRESENTATION('',(#8765),#8769);+#8765 = LINE('',#8766,#8767);+#8766 = CARTESIAN_POINT('',(1.738859473445E-02,9.789134813468E-03));+#8767 = VECTOR('',#8768,1.);+#8768 = DIRECTION('',(0.,1.));+#8769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8770 = ORIENTED_EDGE('',*,*,#8771,.T.);+#8771 = EDGE_CURVE('',#8756,#8772,#8774,.T.);+#8772 = VERTEX_POINT('',#8773);+#8773 = CARTESIAN_POINT('',(-6.304975646306E-02,0.346548252837,0.955));+#8774 = SURFACE_CURVE('',#8775,(#8779),.PCURVE_S1.);+#8775 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8776,#8777,#8778),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8776 = CARTESIAN_POINT('',(-4.694920578302E-02,0.37598005948,0.955));+#8777 = CARTESIAN_POINT('',(-5.776877584001E-02,0.360781139638,0.955));+#8778 = CARTESIAN_POINT('',(-6.304975646306E-02,0.346548252837,0.955));+#8779 = PCURVE('',#8423,#8780);+#8780 = DEFINITIONAL_REPRESENTATION('',(#8781),#8785);+#8781 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8782,#8783,#8784),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8782 = CARTESIAN_POINT('',(1.738859473445E-02,4.907447847278E-02));+#8783 = CARTESIAN_POINT('',(3.258751457642E-02,3.825490841579E-02));+#8784 = CARTESIAN_POINT('',(4.682040137758E-02,3.297392779274E-02));+#8785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8786 = ORIENTED_EDGE('',*,*,#8787,.T.);+#8787 = EDGE_CURVE('',#8772,#8788,#8790,.T.);+#8788 = VERTEX_POINT('',#8789);+#8789 = CARTESIAN_POINT('',(-6.833073708612E-02,0.318404490249,0.955));+#8790 = SURFACE_CURVE('',#8791,(#8795),.PCURVE_S1.);+#8791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8792,#8793,#8794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8792 = CARTESIAN_POINT('',(-6.304975646306E-02,0.346548252837,0.955));+#8793 = CARTESIAN_POINT('',(-6.833073708612E-02,0.332315366036,0.955));+#8794 = CARTESIAN_POINT('',(-6.833073708612E-02,0.318404490249,0.955));+#8795 = PCURVE('',#8423,#8796);+#8796 = DEFINITIONAL_REPRESENTATION('',(#8797),#8801);+#8797 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8798,#8799,#8800),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8798 = CARTESIAN_POINT('',(4.682040137758E-02,3.297392779274E-02));+#8799 = CARTESIAN_POINT('',(6.105328817874E-02,2.769294716968E-02));+#8800 = CARTESIAN_POINT('',(7.49641639663E-02,2.769294716968E-02));+#8801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8802 = ORIENTED_EDGE('',*,*,#8803,.T.);+#8803 = EDGE_CURVE('',#8788,#8804,#8806,.T.);+#8804 = VERTEX_POINT('',#8805);+#8805 = CARTESIAN_POINT('',(-6.195491901682E-02,0.296636545729,0.955));+#8806 = SURFACE_CURVE('',#8807,(#8811),.PCURVE_S1.);+#8807 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8808,#8809,#8810),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8808 = CARTESIAN_POINT('',(-6.833073708612E-02,0.318404490249,0.955));+#8809 = CARTESIAN_POINT('',(-6.833073708612E-02,0.304364810056,0.955));+#8810 = CARTESIAN_POINT('',(-6.195491901682E-02,0.296636545729,0.955));+#8811 = PCURVE('',#8423,#8812);+#8812 = DEFINITIONAL_REPRESENTATION('',(#8813),#8817);+#8813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8814,#8815,#8816),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8814 = CARTESIAN_POINT('',(7.49641639663E-02,2.769294716968E-02));+#8815 = CARTESIAN_POINT('',(8.90038441593E-02,2.769294716968E-02));+#8816 = CARTESIAN_POINT('',(9.673210848572E-02,3.406876523898E-02));+#8817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8818 = ORIENTED_EDGE('',*,*,#8819,.T.);+#8819 = EDGE_CURVE('',#8804,#8820,#8822,.T.);+#8820 = VERTEX_POINT('',#8821);+#8821 = CARTESIAN_POINT('',(-4.411550886333E-02,0.288908281403,0.955));+#8822 = SURFACE_CURVE('',#8823,(#8827),.PCURVE_S1.);+#8823 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8824,#8825,#8826),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8824 = CARTESIAN_POINT('',(-6.195491901682E-02,0.296636545729,0.955));+#8825 = CARTESIAN_POINT('',(-5.557910094752E-02,0.288908281403,0.955));+#8826 = CARTESIAN_POINT('',(-4.411550886333E-02,0.288908281403,0.955));+#8827 = PCURVE('',#8423,#8828);+#8828 = DEFINITIONAL_REPRESENTATION('',(#8829),#8833);+#8829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8830,#8831,#8832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8830 = CARTESIAN_POINT('',(9.673210848572E-02,3.406876523898E-02));+#8831 = CARTESIAN_POINT('',(0.104460372812,4.044458330828E-02));+#8832 = CARTESIAN_POINT('',(0.104460372812,5.190817539247E-02));+#8833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8834 = ORIENTED_EDGE('',*,*,#8835,.T.);+#8835 = EDGE_CURVE('',#8820,#8836,#8838,.T.);+#8836 = VERTEX_POINT('',#8837);+#8837 = CARTESIAN_POINT('',(-2.898099122408E-02,0.29406045762,0.955));+#8838 = SURFACE_CURVE('',#8839,(#8843),.PCURVE_S1.);+#8839 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8840,#8841,#8842),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8840 = CARTESIAN_POINT('',(-4.411550886333E-02,0.288908281403,0.955));+#8841 = CARTESIAN_POINT('',(-3.548561369882E-02,0.288908281403,0.955));+#8842 = CARTESIAN_POINT('',(-2.898099122408E-02,0.29406045762,0.955));+#8843 = PCURVE('',#8423,#8844);+#8844 = DEFINITIONAL_REPRESENTATION('',(#8845),#8849);+#8845 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8846,#8847,#8848),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8846 = CARTESIAN_POINT('',(0.104460372812,5.190817539247E-02));+#8847 = CARTESIAN_POINT('',(0.104460372812,6.053807055698E-02));+#8848 = CARTESIAN_POINT('',(9.930819659453E-02,6.704269303172E-02));+#8849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8850 = ORIENTED_EDGE('',*,*,#8851,.T.);+#8851 = EDGE_CURVE('',#8836,#8413,#8852,.T.);+#8852 = SURFACE_CURVE('',#8853,(#8857),.PCURVE_S1.);+#8853 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8854,#8855,#8856),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8854 = CARTESIAN_POINT('',(-2.898099122408E-02,0.29406045762,0.955));+#8855 = CARTESIAN_POINT('',(-2.247636874935E-02,0.299212633838,0.955));+#8856 = CARTESIAN_POINT('',(-1.874104099157E-02,0.309001768651,0.955));+#8857 = PCURVE('',#8423,#8858);+#8858 = DEFINITIONAL_REPRESENTATION('',(#8859),#8863);+#8859 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8860,#8861,#8862),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8860 = CARTESIAN_POINT('',(9.930819659453E-02,6.704269303172E-02));+#8861 = CARTESIAN_POINT('',(9.415602037692E-02,7.354731550645E-02));+#8862 = CARTESIAN_POINT('',(8.436688556345E-02,7.728264326423E-02));+#8863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8864 = SHELL_BASED_SURFACE_MODEL('',(#8865));+#8865 = OPEN_SHELL('',(#8866));+#8866 = ADVANCED_FACE('',(#8867),#8881,.T.);+#8867 = FACE_BOUND('',#8868,.F.);+#8868 = EDGE_LOOP('',(#8869,#8892,#8908,#8924,#8940,#8956,#8972,#8988,+ #9004,#9020,#9036,#9052,#9068,#9084,#9100,#9116,#9132,#9148,#9164,+ #9180,#9196,#9212,#9228,#9244,#9260,#9276,#9292,#9308,#9324));+#8869 = ORIENTED_EDGE('',*,*,#8870,.T.);+#8870 = EDGE_CURVE('',#8871,#8873,#8875,.T.);+#8871 = VERTEX_POINT('',#8872);+#8872 = CARTESIAN_POINT('',(-9.982341421629E-03,0.16383920372,0.955));+#8873 = VERTEX_POINT('',#8874);+#8874 = CARTESIAN_POINT('',(-9.982341421629E-03,0.18419029978,0.955));+#8875 = SURFACE_CURVE('',#8876,(#8880),.PCURVE_S1.);+#8876 = LINE('',#8877,#8878);+#8877 = CARTESIAN_POINT('',(-9.982341421629E-03,0.16383920372,0.955));+#8878 = VECTOR('',#8879,1.);+#8879 = DIRECTION('',(2.22044604925E-16,1.,0.));+#8880 = PCURVE('',#8881,#8886);+#8881 = PLANE('',#8882);+#8882 = AXIS2_PLACEMENT_3D('',#8883,#8884,#8885);+#8883 = CARTESIAN_POINT('',(-9.60236842558E-02,0.234552822307,0.955));+#8884 = DIRECTION('',(0.,0.,1.));+#8885 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8886 = DEFINITIONAL_REPRESENTATION('',(#8887),#8891);+#8887 = LINE('',#8888,#8889);+#8888 = CARTESIAN_POINT('',(7.071361858677E-02,8.604134283417E-02));+#8889 = VECTOR('',#8890,1.);+#8890 = DIRECTION('',(-1.,0.));+#8891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8892 = ORIENTED_EDGE('',*,*,#8893,.T.);+#8893 = EDGE_CURVE('',#8873,#8894,#8896,.T.);+#8894 = VERTEX_POINT('',#8895);+#8895 = CARTESIAN_POINT('',(2.350680399287E-02,0.18419029978,0.955));+#8896 = SURFACE_CURVE('',#8897,(#8901),.PCURVE_S1.);+#8897 = LINE('',#8898,#8899);+#8898 = CARTESIAN_POINT('',(-9.982341421629E-03,0.18419029978,0.955));+#8899 = VECTOR('',#8900,1.);+#8900 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#8901 = PCURVE('',#8881,#8902);+#8902 = DEFINITIONAL_REPRESENTATION('',(#8903),#8907);+#8903 = LINE('',#8904,#8905);+#8904 = CARTESIAN_POINT('',(5.036252252719E-02,8.604134283417E-02));+#8905 = VECTOR('',#8906,1.);+#8906 = DIRECTION('',(0.,1.));+#8907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8908 = ORIENTED_EDGE('',*,*,#8909,.T.);+#8909 = EDGE_CURVE('',#8894,#8910,#8912,.T.);+#8910 = VERTEX_POINT('',#8911);+#8911 = CARTESIAN_POINT('',(2.350680399287E-02,0.16383920372,0.955));+#8912 = SURFACE_CURVE('',#8913,(#8917),.PCURVE_S1.);+#8913 = LINE('',#8914,#8915);+#8914 = CARTESIAN_POINT('',(2.350680399287E-02,0.18419029978,0.955));+#8915 = VECTOR('',#8916,1.);+#8916 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#8917 = PCURVE('',#8881,#8918);+#8918 = DEFINITIONAL_REPRESENTATION('',(#8919),#8923);+#8919 = LINE('',#8920,#8921);+#8920 = CARTESIAN_POINT('',(5.036252252719E-02,0.119530488249));+#8921 = VECTOR('',#8922,1.);+#8922 = DIRECTION('',(1.,0.));+#8923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8924 = ORIENTED_EDGE('',*,*,#8925,.T.);+#8925 = EDGE_CURVE('',#8910,#8926,#8928,.T.);+#8926 = VERTEX_POINT('',#8927);+#8927 = CARTESIAN_POINT('',(2.910979562953E-02,0.141878052593,0.955));+#8928 = SURFACE_CURVE('',#8929,(#8933),.PCURVE_S1.);+#8929 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8930,#8931,#8932),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8930 = CARTESIAN_POINT('',(2.350680399287E-02,0.16383920372,0.955));+#8931 = CARTESIAN_POINT('',(2.350680399287E-02,0.149670719122,0.955));+#8932 = CARTESIAN_POINT('',(2.910979562952E-02,0.141878052593,0.955));+#8933 = PCURVE('',#8881,#8934);+#8934 = DEFINITIONAL_REPRESENTATION('',(#8935),#8939);+#8935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8936,#8937,#8938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8936 = CARTESIAN_POINT('',(7.071361858677E-02,0.119530488249));+#8937 = CARTESIAN_POINT('',(8.488210318521E-02,0.119530488249));+#8938 = CARTESIAN_POINT('',(9.267476971435E-02,0.125133479885));+#8939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8940 = ORIENTED_EDGE('',*,*,#8941,.T.);+#8941 = EDGE_CURVE('',#8926,#8942,#8944,.T.);+#8942 = VERTEX_POINT('',#8943);+#8943 = CARTESIAN_POINT('',(4.488833529597E-02,0.134085386063,0.955));+#8944 = SURFACE_CURVE('',#8945,(#8949),.PCURVE_S1.);+#8945 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8946,#8947,#8948),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8946 = CARTESIAN_POINT('',(2.910979562952E-02,0.141878052593,0.955));+#8947 = CARTESIAN_POINT('',(3.471278726618E-02,0.134085386063,0.955));+#8948 = CARTESIAN_POINT('',(4.488833529597E-02,0.134085386063,0.955));+#8949 = PCURVE('',#8881,#8950);+#8950 = DEFINITIONAL_REPRESENTATION('',(#8951),#8955);+#8951 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8952,#8953,#8954),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8952 = CARTESIAN_POINT('',(9.267476971435E-02,0.125133479885));+#8953 = CARTESIAN_POINT('',(0.100467436243,0.130736471522));+#8954 = CARTESIAN_POINT('',(0.100467436243,0.140912019552));+#8955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8956 = ORIENTED_EDGE('',*,*,#8957,.T.);+#8957 = EDGE_CURVE('',#8942,#8958,#8960,.T.);+#8958 = VERTEX_POINT('',#8959);+#8959 = CARTESIAN_POINT('',(6.15685058005E-02,0.141878052593,0.955));+#8960 = SURFACE_CURVE('',#8961,(#8965),.PCURVE_S1.);+#8961 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8962,#8963,#8964),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8962 = CARTESIAN_POINT('',(4.488833529597E-02,0.134085386063,0.955));+#8963 = CARTESIAN_POINT('',(5.557910094752E-02,0.134085386063,0.955));+#8964 = CARTESIAN_POINT('',(6.15685058005E-02,0.141878052593,0.955));+#8965 = PCURVE('',#8881,#8966);+#8966 = DEFINITIONAL_REPRESENTATION('',(#8967),#8971);+#8967 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8968,#8969,#8970),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8968 = CARTESIAN_POINT('',(0.100467436243,0.140912019552));+#8969 = CARTESIAN_POINT('',(0.100467436243,0.151602785203));+#8970 = CARTESIAN_POINT('',(9.267476971435E-02,0.157592190056));+#8971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8972 = ORIENTED_EDGE('',*,*,#8973,.T.);+#8973 = EDGE_CURVE('',#8958,#8974,#8976,.T.);+#8974 = VERTEX_POINT('',#8975);+#8975 = CARTESIAN_POINT('',(6.755791065348E-02,0.16383920372,0.955));+#8976 = SURFACE_CURVE('',#8977,(#8981),.PCURVE_S1.);+#8977 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8978,#8979,#8980),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8978 = CARTESIAN_POINT('',(6.15685058005E-02,0.141878052593,0.955));+#8979 = CARTESIAN_POINT('',(6.755791065348E-02,0.149670719122,0.955));+#8980 = CARTESIAN_POINT('',(6.755791065348E-02,0.16383920372,0.955));+#8981 = PCURVE('',#8881,#8982);+#8982 = DEFINITIONAL_REPRESENTATION('',(#8983),#8987);+#8983 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8984,#8985,#8986),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8984 = CARTESIAN_POINT('',(9.267476971435E-02,0.157592190056));+#8985 = CARTESIAN_POINT('',(8.488210318521E-02,0.163581594909));+#8986 = CARTESIAN_POINT('',(7.071361858677E-02,0.163581594909));+#8987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8988 = ORIENTED_EDGE('',*,*,#8989,.T.);+#8989 = EDGE_CURVE('',#8974,#8990,#8992,.T.);+#8990 = VERTEX_POINT('',#8991);+#8991 = CARTESIAN_POINT('',(6.485301813923E-02,0.187023996699,0.955));+#8992 = SURFACE_CURVE('',#8993,(#8997),.PCURVE_S1.);+#8993 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8994,#8995,#8996),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8994 = CARTESIAN_POINT('',(6.755791065348E-02,0.16383920372,0.955));+#8995 = CARTESIAN_POINT('',(6.755791065348E-02,0.174658773777,0.955));+#8996 = CARTESIAN_POINT('',(6.485301813923E-02,0.187023996699,0.955));+#8997 = PCURVE('',#8881,#8998); #8998 = DEFINITIONAL_REPRESENTATION('',(#8999),#9003);-#8999 = LINE('',#9000,#9001);-#9000 = CARTESIAN_POINT('',(0.,0.));-#9001 = VECTOR('',#9002,1.);-#9002 = DIRECTION('',(0.,-1.));+#8999 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9000,#9001,#9002),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9000 = CARTESIAN_POINT('',(7.071361858677E-02,0.163581594909));+#9001 = CARTESIAN_POINT('',(5.989404852977E-02,0.163581594909));+#9002 = CARTESIAN_POINT('',(4.75288256075E-02,0.160876702395)); #9003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9004 = ORIENTED_EDGE('',*,*,#9005,.F.);-#9005 = EDGE_CURVE('',#8902,#8978,#9006,.T.);-#9006 = SURFACE_CURVE('',#9007,(#9011,#9018),.PCURVE_S1.);-#9007 = LINE('',#9008,#9009);-#9008 = CARTESIAN_POINT('',(-0.478116861979,-5.923719618056E-02,- 1.5450001));-#9009 = VECTOR('',#9010,1.);-#9010 = DIRECTION('',(-1.,0.,0.));-#9011 = PCURVE('',#8917,#9012);-#9012 = DEFINITIONAL_REPRESENTATION('',(#9013),#9017);-#9013 = LINE('',#9014,#9015);-#9014 = CARTESIAN_POINT('',(0.,0.));-#9015 = VECTOR('',#9016,1.);-#9016 = DIRECTION('',(1.,0.));-#9017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9018 = PCURVE('',#8862,#9019);-#9019 = DEFINITIONAL_REPRESENTATION('',(#9020),#9024);-#9020 = LINE('',#9021,#9022);-#9021 = CARTESIAN_POINT('',(8.8479817709E-02,0.));-#9022 = VECTOR('',#9023,1.);-#9023 = DIRECTION('',(-1.,0.));-#9024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9025 = ADVANCED_FACE('',(#9026),#8993,.F.);-#9026 = FACE_BOUND('',#9027,.F.);-#9027 = EDGE_LOOP('',(#9028,#9029,#9052,#9082));-#9028 = ORIENTED_EDGE('',*,*,#8977,.T.);-#9029 = ORIENTED_EDGE('',*,*,#9030,.T.);-#9030 = EDGE_CURVE('',#8955,#9031,#9033,.T.);-#9031 = VERTEX_POINT('',#9032);-#9032 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5050001- ));-#9033 = SURFACE_CURVE('',#9034,(#9038,#9045),.PCURVE_S1.);-#9034 = LINE('',#9035,#9036);-#9035 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5050001- ));-#9036 = VECTOR('',#9037,1.);-#9037 = DIRECTION('',(0.,1.,0.));-#9038 = PCURVE('',#8993,#9039);-#9039 = DEFINITIONAL_REPRESENTATION('',(#9040),#9044);-#9040 = LINE('',#9041,#9042);-#9041 = CARTESIAN_POINT('',(0.,-4.E-02));-#9042 = VECTOR('',#9043,1.);-#9043 = DIRECTION('',(1.,0.));-#9044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9045 = PCURVE('',#8808,#9046);+#9004 = ORIENTED_EDGE('',*,*,#9005,.T.);+#9005 = EDGE_CURVE('',#8990,#9006,#9008,.T.);+#9006 = VERTEX_POINT('',#9007);+#9007 = CARTESIAN_POINT('',(5.699594940737E-02,0.212656073382,0.955));+#9008 = SURFACE_CURVE('',#9009,(#9013),.PCURVE_S1.);+#9009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9010,#9011,#9012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9010 = CARTESIAN_POINT('',(6.485301813923E-02,0.187023996699,0.955));+#9011 = CARTESIAN_POINT('',(6.214812562498E-02,0.199389219622,0.955));+#9012 = CARTESIAN_POINT('',(5.699594940737E-02,0.212656073382,0.955));+#9013 = PCURVE('',#8881,#9014);+#9014 = DEFINITIONAL_REPRESENTATION('',(#9015),#9019);+#9015 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9016,#9017,#9018),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9016 = CARTESIAN_POINT('',(4.75288256075E-02,0.160876702395));+#9017 = CARTESIAN_POINT('',(3.516360268522E-02,0.158171809881));+#9018 = CARTESIAN_POINT('',(2.189674892486E-02,0.153019633663));+#9019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9020 = ORIENTED_EDGE('',*,*,#9021,.T.);+#9021 = EDGE_CURVE('',#9006,#9022,#9024,.T.);+#9022 = VERTEX_POINT('',#9023);+#9023 = CARTESIAN_POINT('',(9.151553006539E-02,0.212656073382,0.955));+#9024 = SURFACE_CURVE('',#9025,(#9029),.PCURVE_S1.);+#9025 = LINE('',#9026,#9027);+#9026 = CARTESIAN_POINT('',(5.699594940737E-02,0.212656073382,0.955));+#9027 = VECTOR('',#9028,1.);+#9028 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#9029 = PCURVE('',#8881,#9030);+#9030 = DEFINITIONAL_REPRESENTATION('',(#9031),#9035);+#9031 = LINE('',#9032,#9033);+#9032 = CARTESIAN_POINT('',(2.189674892486E-02,0.153019633663));+#9033 = VECTOR('',#9034,1.);+#9034 = DIRECTION('',(0.,1.));+#9035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9036 = ORIENTED_EDGE('',*,*,#9037,.T.);+#9037 = EDGE_CURVE('',#9022,#9038,#9040,.T.);+#9038 = VERTEX_POINT('',#9039);+#9039 = CARTESIAN_POINT('',(9.763373932381E-02,0.186508779078,0.955));+#9040 = SURFACE_CURVE('',#9041,(#9045),.PCURVE_S1.);+#9041 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9042,#9043,#9044),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9042 = CARTESIAN_POINT('',(9.151553006539E-02,0.212656073382,0.955));+#9043 = CARTESIAN_POINT('',(9.550846663404E-02,0.199389219622,0.955));+#9044 = CARTESIAN_POINT('',(9.763373932381E-02,0.186508779078,0.955));+#9045 = PCURVE('',#8881,#9046); #9046 = DEFINITIONAL_REPRESENTATION('',(#9047),#9051);-#9047 = LINE('',#9048,#9049);-#9048 = CARTESIAN_POINT('',(1.2699652778E-02,0.));-#9049 = VECTOR('',#9050,1.);-#9050 = DIRECTION('',(0.,1.));+#9047 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9048,#9049,#9050),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9048 = CARTESIAN_POINT('',(2.189674892486E-02,0.187539214321));+#9049 = CARTESIAN_POINT('',(3.516360268522E-02,0.19153215089));+#9050 = CARTESIAN_POINT('',(4.804404322926E-02,0.19365742358)); #9051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9052 = ORIENTED_EDGE('',*,*,#9053,.F.);-#9053 = EDGE_CURVE('',#9054,#9031,#9056,.T.);+#9052 = ORIENTED_EDGE('',*,*,#9053,.T.);+#9053 = EDGE_CURVE('',#9038,#9054,#9056,.T.); #9054 = VERTEX_POINT('',#9055);-#9055 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5450001- ));-#9056 = SURFACE_CURVE('',#9057,(#9061,#9068),.PCURVE_S1.);-#9057 = LINE('',#9058,#9059);-#9058 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5450001- ));-#9059 = VECTOR('',#9060,1.);-#9060 = DIRECTION('',(-0.,-0.,-1.));-#9061 = PCURVE('',#8993,#9062);+#9055 = CARTESIAN_POINT('',(9.975901201357E-02,0.161778333233,0.955));+#9056 = SURFACE_CURVE('',#9057,(#9061),.PCURVE_S1.);+#9057 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9058,#9059,#9060),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9058 = CARTESIAN_POINT('',(9.763373932381E-02,0.186508779078,0.955));+#9059 = CARTESIAN_POINT('',(9.975901201357E-02,0.173628338534,0.955));+#9060 = CARTESIAN_POINT('',(9.975901201357E-02,0.161778333233,0.955));+#9061 = PCURVE('',#8881,#9062); #9062 = DEFINITIONAL_REPRESENTATION('',(#9063),#9067);-#9063 = LINE('',#9064,#9065);-#9064 = CARTESIAN_POINT('',(1.420355902778E-02,0.));-#9065 = VECTOR('',#9066,1.);-#9066 = DIRECTION('',(0.,-1.));+#9063 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9064,#9065,#9066),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9064 = CARTESIAN_POINT('',(4.804404322926E-02,0.19365742358));+#9065 = CARTESIAN_POINT('',(6.09244837733E-02,0.195782696269));+#9066 = CARTESIAN_POINT('',(7.277448907381E-02,0.195782696269)); #9067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9068 = PCURVE('',#9069,#9076);-#9069 = SURFACE_OF_LINEAR_EXTRUSION('',#9070,#9074);-#9070 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9071,#9072,#9073),+#9068 = ORIENTED_EDGE('',*,*,#9069,.T.);+#9069 = EDGE_CURVE('',#9054,#9070,#9072,.T.);+#9070 = VERTEX_POINT('',#9071);+#9071 = CARTESIAN_POINT('',(8.649215825321E-02,0.114378312031,0.955));+#9072 = SURFACE_CURVE('',#9073,(#9077),.PCURVE_S1.);+#9073 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9074,#9075,#9076), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9071 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5450001- ));-#9072 = CARTESIAN_POINT('',(-0.538273111979,-2.857421875E-02,1.5450001)- );-#9073 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9074 = VECTOR('',#9075,1.);-#9075 = DIRECTION('',(0.,0.,1.));-#9076 = DEFINITIONAL_REPRESENTATION('',(#9077),#9081);-#9077 = LINE('',#9078,#9079);-#9078 = CARTESIAN_POINT('',(0.,0.));-#9079 = VECTOR('',#9080,1.);-#9080 = DIRECTION('',(0.,-1.));-#9081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9082 = ORIENTED_EDGE('',*,*,#9083,.F.);-#9083 = EDGE_CURVE('',#8978,#9054,#9084,.T.);-#9084 = SURFACE_CURVE('',#9085,(#9089,#9096),.PCURVE_S1.);-#9085 = LINE('',#9086,#9087);-#9086 = CARTESIAN_POINT('',(-0.55389702691,-5.923719618056E-02,1.5450001- ));-#9087 = VECTOR('',#9088,1.);-#9088 = DIRECTION('',(0.,1.,0.));-#9089 = PCURVE('',#8993,#9090);-#9090 = DEFINITIONAL_REPRESENTATION('',(#9091),#9095);-#9091 = LINE('',#9092,#9093);-#9092 = CARTESIAN_POINT('',(0.,0.));-#9093 = VECTOR('',#9094,1.);-#9094 = DIRECTION('',(1.,0.));-#9095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9096 = PCURVE('',#8862,#9097);-#9097 = DEFINITIONAL_REPRESENTATION('',(#9098),#9102);-#9098 = LINE('',#9099,#9100);-#9099 = CARTESIAN_POINT('',(1.2699652778E-02,0.));-#9100 = VECTOR('',#9101,1.);-#9101 = DIRECTION('',(0.,1.));-#9102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9103 = ADVANCED_FACE('',(#9104),#9069,.F.);-#9104 = FACE_BOUND('',#9105,.F.);-#9105 = EDGE_LOOP('',(#9106,#9107,#9130,#9160));-#9106 = ORIENTED_EDGE('',*,*,#9053,.T.);-#9107 = ORIENTED_EDGE('',*,*,#9108,.T.);-#9108 = EDGE_CURVE('',#9031,#9109,#9111,.T.);-#9109 = VERTEX_POINT('',#9110);-#9110 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5050001));-#9111 = SURFACE_CURVE('',#9112,(#9116,#9123),.PCURVE_S1.);-#9112 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9113,#9114,#9115),+#9074 = CARTESIAN_POINT('',(9.975901201357E-02,0.161778333233,0.955));+#9075 = CARTESIAN_POINT('',(9.975901201357E-02,0.131380493549,0.955));+#9076 = CARTESIAN_POINT('',(8.649215825321E-02,0.114378312031,0.955));+#9077 = PCURVE('',#8881,#9078);+#9078 = DEFINITIONAL_REPRESENTATION('',(#9079),#9083);+#9079 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9080,#9081,#9082), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9113 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5050001- ));-#9114 = CARTESIAN_POINT('',(-0.538273111979,-2.857421875E-02,1.5050001)+#9080 = CARTESIAN_POINT('',(7.277448907381E-02,0.195782696269));+#9081 = CARTESIAN_POINT('',(0.103172328758,0.195782696269));+#9082 = CARTESIAN_POINT('',(0.120174510276,0.182515842509));+#9083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9084 = ORIENTED_EDGE('',*,*,#9085,.T.);+#9085 = EDGE_CURVE('',#9070,#9086,#9088,.T.);+#9086 = VERTEX_POINT('',#9087);+#9087 = CARTESIAN_POINT('',(4.991170710815E-02,9.737613051292E-02,0.955) );-#9115 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5050001));-#9116 = PCURVE('',#9069,#9117);-#9117 = DEFINITIONAL_REPRESENTATION('',(#9118),#9122);-#9118 = LINE('',#9119,#9120);-#9119 = CARTESIAN_POINT('',(0.,-4.E-02));-#9120 = VECTOR('',#9121,1.);-#9121 = DIRECTION('',(1.,0.));-#9122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9123 = PCURVE('',#8808,#9124);-#9124 = DEFINITIONAL_REPRESENTATION('',(#9125),#9129);-#9125 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9126,#9127,#9128),+#9088 = SURFACE_CURVE('',#9089,(#9093),.PCURVE_S1.);+#9089 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9090,#9091,#9092), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9126 = CARTESIAN_POINT('',(1.2699652778E-02,1.420355902778E-02));-#9127 = CARTESIAN_POINT('',(2.8323567709E-02,3.066297743056E-02));-#9128 = CARTESIAN_POINT('',(4.002061632E-02,4.327907986112E-02));-#9129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9130 = ORIENTED_EDGE('',*,*,#9131,.F.);-#9131 = EDGE_CURVE('',#9132,#9109,#9134,.T.);-#9132 = VERTEX_POINT('',#9133);-#9133 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9134 = SURFACE_CURVE('',#9135,(#9139,#9146),.PCURVE_S1.);-#9135 = LINE('',#9136,#9137);-#9136 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9137 = VECTOR('',#9138,1.);-#9138 = DIRECTION('',(-0.,-0.,-1.));-#9139 = PCURVE('',#9069,#9140);-#9140 = DEFINITIONAL_REPRESENTATION('',(#9141),#9145);-#9141 = LINE('',#9142,#9143);-#9142 = CARTESIAN_POINT('',(1.,0.));-#9143 = VECTOR('',#9144,1.);-#9144 = DIRECTION('',(0.,-1.));-#9145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9146 = PCURVE('',#9147,#9154);-#9147 = SURFACE_OF_LINEAR_EXTRUSION('',#9148,#9152);-#9148 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9149,#9150,#9151),+#9090 = CARTESIAN_POINT('',(8.649215825321E-02,0.114378312031,0.955));+#9091 = CARTESIAN_POINT('',(7.322530449285E-02,9.737613051292E-02,0.955)+ );+#9092 = CARTESIAN_POINT('',(4.991170710815E-02,9.737613051292E-02,0.955)+ );+#9093 = PCURVE('',#8881,#9094);+#9094 = DEFINITIONAL_REPRESENTATION('',(#9095),#9099);+#9095 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9096,#9097,#9098), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9149 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9150 = CARTESIAN_POINT('',(-0.514879014757,-3.342013888889E-03,- 1.5450001));-#9151 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001- ));-#9152 = VECTOR('',#9153,1.);-#9153 = DIRECTION('',(0.,0.,1.));-#9154 = DEFINITIONAL_REPRESENTATION('',(#9155),#9159);-#9155 = LINE('',#9156,#9157);-#9156 = CARTESIAN_POINT('',(0.,0.));-#9157 = VECTOR('',#9158,1.);-#9158 = DIRECTION('',(0.,-1.));-#9159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9160 = ORIENTED_EDGE('',*,*,#9161,.F.);-#9161 = EDGE_CURVE('',#9054,#9132,#9162,.T.);-#9162 = SURFACE_CURVE('',#9163,(#9167,#9174),.PCURVE_S1.);-#9163 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9164,#9165,#9166),+#9096 = CARTESIAN_POINT('',(0.120174510276,0.182515842509));+#9097 = CARTESIAN_POINT('',(0.137176691794,0.169248988749));+#9098 = CARTESIAN_POINT('',(0.137176691794,0.145935391364));+#9099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9100 = ORIENTED_EDGE('',*,*,#9101,.T.);+#9101 = EDGE_CURVE('',#9086,#9102,#9104,.T.);+#9102 = VERTEX_POINT('',#9103);+#9103 = CARTESIAN_POINT('',(2.189674892486E-02,0.107165265326,0.955));+#9104 = SURFACE_CURVE('',#9105,(#9109),.PCURVE_S1.);+#9105 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9106,#9107,#9108), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9164 = CARTESIAN_POINT('',(-0.55389702691,-4.503363715278E-02,1.5450001- ));-#9165 = CARTESIAN_POINT('',(-0.538273111979,-2.857421875E-02,1.5450001)+#9106 = CARTESIAN_POINT('',(4.991170710815E-02,9.737613051292E-02,0.955)+ );+#9107 = CARTESIAN_POINT('',(3.278072118458E-02,9.737613051292E-02,0.955) );-#9166 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9167 = PCURVE('',#9069,#9168);-#9168 = DEFINITIONAL_REPRESENTATION('',(#9169),#9173);-#9169 = LINE('',#9170,#9171);-#9170 = CARTESIAN_POINT('',(0.,0.));-#9171 = VECTOR('',#9172,1.);-#9172 = DIRECTION('',(1.,0.));-#9173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9174 = PCURVE('',#8862,#9175);-#9175 = DEFINITIONAL_REPRESENTATION('',(#9176),#9180);-#9176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9177,#9178,#9179),+#9108 = CARTESIAN_POINT('',(2.189674892486E-02,0.107165265326,0.955));+#9109 = PCURVE('',#8881,#9110);+#9110 = DEFINITIONAL_REPRESENTATION('',(#9111),#9115);+#9111 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9112,#9113,#9114), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9177 = CARTESIAN_POINT('',(1.2699652778E-02,1.420355902778E-02));-#9178 = CARTESIAN_POINT('',(2.8323567709E-02,3.066297743056E-02));-#9179 = CARTESIAN_POINT('',(4.002061632E-02,4.327907986112E-02));-#9180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9181 = ADVANCED_FACE('',(#9182),#9147,.F.);-#9182 = FACE_BOUND('',#9183,.F.);-#9183 = EDGE_LOOP('',(#9184,#9185,#9208,#9238));-#9184 = ORIENTED_EDGE('',*,*,#9131,.T.);-#9185 = ORIENTED_EDGE('',*,*,#9186,.T.);-#9186 = EDGE_CURVE('',#9109,#9187,#9189,.T.);-#9187 = VERTEX_POINT('',#9188);-#9188 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5050001- ));-#9189 = SURFACE_CURVE('',#9190,(#9194,#9201),.PCURVE_S1.);-#9190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9191,#9192,#9193),+#9112 = CARTESIAN_POINT('',(0.137176691794,0.145935391364));+#9113 = CARTESIAN_POINT('',(0.137176691794,0.12880440544));+#9114 = CARTESIAN_POINT('',(0.127387556981,0.117920433181));+#9115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9116 = ORIENTED_EDGE('',*,*,#9117,.T.);+#9117 = EDGE_CURVE('',#9102,#9118,#9120,.T.);+#9118 = VERTEX_POINT('',#9119);+#9119 = CARTESIAN_POINT('',(7.663862123702E-03,0.135115821307,0.955));+#9120 = SURFACE_CURVE('',#9121,(#9125),.PCURVE_S1.);+#9121 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9122,#9123,#9124), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9191 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5050001));-#9192 = CARTESIAN_POINT('',(-0.514879014757,-3.342013888889E-03,- 1.5050001));-#9193 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5050001- ));-#9194 = PCURVE('',#9147,#9195);-#9195 = DEFINITIONAL_REPRESENTATION('',(#9196),#9200);-#9196 = LINE('',#9197,#9198);-#9197 = CARTESIAN_POINT('',(0.,-4.E-02));-#9198 = VECTOR('',#9199,1.);-#9199 = DIRECTION('',(1.,0.));-#9200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9201 = PCURVE('',#8808,#9202);-#9202 = DEFINITIONAL_REPRESENTATION('',(#9203),#9207);-#9203 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9204,#9205,#9206),+#9122 = CARTESIAN_POINT('',(2.189674892486E-02,0.107165265326,0.955));+#9123 = CARTESIAN_POINT('',(1.101277666515E-02,0.11695440014,0.955));+#9124 = CARTESIAN_POINT('',(7.663862123702E-03,0.135115821307,0.955));+#9125 = PCURVE('',#8881,#9126);+#9126 = DEFINITIONAL_REPRESENTATION('',(#9127),#9131);+#9127 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9128,#9129,#9130), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9204 = CARTESIAN_POINT('',(4.002061632E-02,4.327907986112E-02));-#9205 = CARTESIAN_POINT('',(5.1717664931E-02,5.589518229167E-02));-#9206 = CARTESIAN_POINT('',(5.6145833334E-02,6.107530381945E-02));-#9207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9128 = CARTESIAN_POINT('',(0.127387556981,0.117920433181));+#9129 = CARTESIAN_POINT('',(0.117598422167,0.107036460921));+#9130 = CARTESIAN_POINT('',(9.943700099997E-02,0.10368754638));+#9131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9208 = ORIENTED_EDGE('',*,*,#9209,.F.);-#9209 = EDGE_CURVE('',#9210,#9187,#9212,.T.);-#9210 = VERTEX_POINT('',#9211);-#9211 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001- ));-#9212 = SURFACE_CURVE('',#9213,(#9217,#9224),.PCURVE_S1.);-#9213 = LINE('',#9214,#9215);-#9214 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001- ));-#9215 = VECTOR('',#9216,1.);-#9216 = DIRECTION('',(-0.,-0.,-1.));-#9217 = PCURVE('',#9147,#9218);-#9218 = DEFINITIONAL_REPRESENTATION('',(#9219),#9223);-#9219 = LINE('',#9220,#9221);-#9220 = CARTESIAN_POINT('',(1.,0.));-#9221 = VECTOR('',#9222,1.);-#9222 = DIRECTION('',(0.,-1.));-#9223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9224 = PCURVE('',#9225,#9232);-#9225 = SURFACE_OF_LINEAR_EXTRUSION('',#9226,#9230);-#9226 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9227,#9228,#9229),+#9132 = ORIENTED_EDGE('',*,*,#9133,.T.);+#9133 = EDGE_CURVE('',#9118,#9134,#9136,.T.);+#9134 = VERTEX_POINT('',#9135);+#9135 = CARTESIAN_POINT('',(-8.758699569946E-03,0.10368754638,0.955));+#9136 = SURFACE_CURVE('',#9137,(#9141),.PCURVE_S1.);+#9137 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9138,#9139,#9140), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9227 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001- ));-#9228 = CARTESIAN_POINT('',(-0.502095811632,1.203125E-02,1.5450001));-#9229 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001- ));-#9230 = VECTOR('',#9231,1.);-#9231 = DIRECTION('',(0.,0.,1.));-#9232 = DEFINITIONAL_REPRESENTATION('',(#9233),#9237);+#9138 = CARTESIAN_POINT('',(7.663862123702E-03,0.135115821307,0.955));+#9139 = CARTESIAN_POINT('',(4.057338771372E-03,0.114507116436,0.955));+#9140 = CARTESIAN_POINT('',(-8.758699569946E-03,0.10368754638,0.955));+#9141 = PCURVE('',#8881,#9142);+#9142 = DEFINITIONAL_REPRESENTATION('',(#9143),#9147);+#9143 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9144,#9145,#9146),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9144 = CARTESIAN_POINT('',(9.943700099997E-02,0.10368754638));+#9145 = CARTESIAN_POINT('',(0.12004570587,0.100081023027));+#9146 = CARTESIAN_POINT('',(0.130865275927,8.726498468585E-02));+#9147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9148 = ORIENTED_EDGE('',*,*,#9149,.T.);+#9149 = EDGE_CURVE('',#9134,#9150,#9152,.T.);+#9150 = VERTEX_POINT('',#9151);+#9151 = CARTESIAN_POINT('',(-4.24410515926E-02,9.286797632251E-02,0.955)+ );+#9152 = SURFACE_CURVE('',#9153,(#9157),.PCURVE_S1.);+#9153 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9154,#9155,#9156),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9154 = CARTESIAN_POINT('',(-8.758699569946E-03,0.10368754638,0.955));+#9155 = CARTESIAN_POINT('',(-2.157473791126E-02,9.286797632251E-02,0.955+ ));+#9156 = CARTESIAN_POINT('',(-4.24410515926E-02,9.286797632251E-02,0.955)+ );+#9157 = PCURVE('',#8881,#9158);+#9158 = DEFINITIONAL_REPRESENTATION('',(#9159),#9163);+#9159 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9160,#9161,#9162),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9160 = CARTESIAN_POINT('',(0.130865275927,8.726498468585E-02));+#9161 = CARTESIAN_POINT('',(0.141684845984,7.444894634454E-02));+#9162 = CARTESIAN_POINT('',(0.141684845984,5.35826326632E-02));+#9163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9164 = ORIENTED_EDGE('',*,*,#9165,.T.);+#9165 = EDGE_CURVE('',#9150,#9166,#9168,.T.);+#9166 = VERTEX_POINT('',#9167);+#9167 = CARTESIAN_POINT('',(-8.507530979337E-02,0.110771788679,0.955));+#9168 = SURFACE_CURVE('',#9169,(#9173),.PCURVE_S1.);+#9169 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9170,#9171,#9172),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9170 = CARTESIAN_POINT('',(-4.24410515926E-02,9.286797632251E-02,0.955)+ );+#9171 = CARTESIAN_POINT('',(-7.039160757317E-02,9.286797632251E-02,0.955+ ));+#9172 = CARTESIAN_POINT('',(-8.507530979337E-02,0.110771788679,0.955));+#9173 = PCURVE('',#8881,#9174);+#9174 = DEFINITIONAL_REPRESENTATION('',(#9175),#9179);+#9175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9176,#9177,#9178),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9176 = CARTESIAN_POINT('',(0.141684845984,5.35826326632E-02));+#9177 = CARTESIAN_POINT('',(0.141684845984,2.563207668263E-02));+#9178 = CARTESIAN_POINT('',(0.123781033628,1.094837446243E-02));+#9179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9180 = ORIENTED_EDGE('',*,*,#9181,.T.);+#9181 = EDGE_CURVE('',#9166,#9182,#9184,.T.);+#9182 = VERTEX_POINT('',#9183);+#9183 = CARTESIAN_POINT('',(-9.975901201357E-02,0.162808768477,0.955));+#9184 = SURFACE_CURVE('',#9185,(#9189),.PCURVE_S1.);+#9185 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9186,#9187,#9188),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9186 = CARTESIAN_POINT('',(-8.507530979337E-02,0.110771788679,0.955));+#9187 = CARTESIAN_POINT('',(-9.975901201357E-02,0.128675601035,0.955));+#9188 = CARTESIAN_POINT('',(-9.975901201357E-02,0.162808768477,0.955));+#9189 = PCURVE('',#8881,#9190);+#9190 = DEFINITIONAL_REPRESENTATION('',(#9191),#9195);+#9191 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9192,#9193,#9194),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9192 = CARTESIAN_POINT('',(0.123781033628,1.094837446243E-02));+#9193 = CARTESIAN_POINT('',(0.105877221272,-3.735327757771E-03));+#9194 = CARTESIAN_POINT('',(7.174405383029E-02,-3.735327757771E-03));+#9195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9196 = ORIENTED_EDGE('',*,*,#9197,.T.);+#9197 = EDGE_CURVE('',#9182,#9198,#9200,.T.);+#9198 = VERTEX_POINT('',#9199);+#9199 = CARTESIAN_POINT('',(-9.73117283102E-02,0.191467748687,0.955));+#9200 = SURFACE_CURVE('',#9201,(#9205),.PCURVE_S1.);+#9201 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9202,#9203,#9204),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9202 = CARTESIAN_POINT('',(-9.975901201357E-02,0.162808768477,0.955));+#9203 = CARTESIAN_POINT('',(-9.975901201357E-02,0.177363666291,0.955));+#9204 = CARTESIAN_POINT('',(-9.73117283102E-02,0.191467748687,0.955));+#9205 = PCURVE('',#8881,#9206);+#9206 = DEFINITIONAL_REPRESENTATION('',(#9207),#9211);+#9207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9208,#9209,#9210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9208 = CARTESIAN_POINT('',(7.174405383029E-02,-3.735327757771E-03));+#9209 = CARTESIAN_POINT('',(5.718915601553E-02,-3.735327757771E-03));+#9210 = CARTESIAN_POINT('',(4.308507361981E-02,-1.288044054404E-03));+#9211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9212 = ORIENTED_EDGE('',*,*,#9213,.T.);+#9213 = EDGE_CURVE('',#9198,#9214,#9216,.T.);+#9214 = VERTEX_POINT('',#9215);+#9215 = CARTESIAN_POINT('',(-9.022748601098E-02,0.218452271627,0.955));+#9216 = SURFACE_CURVE('',#9217,(#9221),.PCURVE_S1.);+#9217 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9218,#9219,#9220),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9218 = CARTESIAN_POINT('',(-9.73117283102E-02,0.191467748687,0.955));+#9219 = CARTESIAN_POINT('',(-9.486444460684E-02,0.205571831083,0.955));+#9220 = CARTESIAN_POINT('',(-9.022748601098E-02,0.218452271627,0.955));+#9221 = PCURVE('',#8881,#9222);+#9222 = DEFINITIONAL_REPRESENTATION('',(#9223),#9227);+#9223 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9224,#9225,#9226),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9224 = CARTESIAN_POINT('',(4.308507361981E-02,-1.288044054404E-03));+#9225 = CARTESIAN_POINT('',(2.898099122408E-02,1.159239648963E-03));+#9226 = CARTESIAN_POINT('',(1.610055068005E-02,5.796198244817E-03));+#9227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9228 = ORIENTED_EDGE('',*,*,#9229,.T.);+#9229 = EDGE_CURVE('',#9214,#9230,#9232,.T.);+#9230 = VERTEX_POINT('',#9231);+#9231 = CARTESIAN_POINT('',(-5.493507892032E-02,0.218452271627,0.955));+#9232 = SURFACE_CURVE('',#9233,(#9237),.PCURVE_S1.); #9233 = LINE('',#9234,#9235);-#9234 = CARTESIAN_POINT('',(0.,0.));+#9234 = CARTESIAN_POINT('',(-9.022748601098E-02,0.218452271627,0.955)); #9235 = VECTOR('',#9236,1.);-#9236 = DIRECTION('',(0.,-1.));-#9237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9238 = ORIENTED_EDGE('',*,*,#9239,.F.);-#9239 = EDGE_CURVE('',#9132,#9210,#9240,.T.);-#9240 = SURFACE_CURVE('',#9241,(#9245,#9252),.PCURVE_S1.);-#9241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9242,#9243,#9244),+#9236 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#9237 = PCURVE('',#8881,#9238);+#9238 = DEFINITIONAL_REPRESENTATION('',(#9239),#9243);+#9239 = LINE('',#9240,#9241);+#9240 = CARTESIAN_POINT('',(1.610055068005E-02,5.796198244817E-03));+#9241 = VECTOR('',#9242,1.);+#9242 = DIRECTION('',(0.,1.));+#9243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9244 = ORIENTED_EDGE('',*,*,#9245,.T.);+#9245 = EDGE_CURVE('',#9230,#9246,#9248,.T.);+#9246 = VERTEX_POINT('',#9247);+#9247 = CARTESIAN_POINT('',(-6.414459390931E-02,0.192304977322,0.955));+#9248 = SURFACE_CURVE('',#9249,(#9253),.PCURVE_S1.);+#9249 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9250,#9251,#9252),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9250 = CARTESIAN_POINT('',(-5.493507892032E-02,0.218452271627,0.955));+#9251 = CARTESIAN_POINT('',(-6.098888597602E-02,0.206344657515,0.955));+#9252 = CARTESIAN_POINT('',(-6.414459390931E-02,0.192304977322,0.955));+#9253 = PCURVE('',#8881,#9254);+#9254 = DEFINITIONAL_REPRESENTATION('',(#9255),#9259);+#9255 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9256,#9257,#9258),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9256 = CARTESIAN_POINT('',(1.610055068005E-02,4.108860533548E-02));+#9257 = CARTESIAN_POINT('',(2.820816479144E-02,3.503479827978E-02));+#9258 = CARTESIAN_POINT('',(4.224784498444E-02,3.187909034649E-02));+#9259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9260 = ORIENTED_EDGE('',*,*,#9261,.T.);+#9261 = EDGE_CURVE('',#9246,#9262,#9264,.T.);+#9262 = VERTEX_POINT('',#9263);+#9263 = CARTESIAN_POINT('',(-6.73003018426E-02,0.162808768477,0.955));+#9264 = SURFACE_CURVE('',#9265,(#9269),.PCURVE_S1.);+#9265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9266,#9267,#9268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9266 = CARTESIAN_POINT('',(-6.414459390931E-02,0.192304977322,0.955));+#9267 = CARTESIAN_POINT('',(-6.73003018426E-02,0.178265297129,0.955));+#9268 = CARTESIAN_POINT('',(-6.73003018426E-02,0.162808768477,0.955));+#9269 = PCURVE('',#8881,#9270);+#9270 = DEFINITIONAL_REPRESENTATION('',(#9271),#9275);+#9271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9272,#9273,#9274),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9272 = CARTESIAN_POINT('',(4.224784498444E-02,3.187909034649E-02));+#9273 = CARTESIAN_POINT('',(5.628752517744E-02,2.87233824132E-02));+#9274 = CARTESIAN_POINT('',(7.174405383029E-02,2.87233824132E-02));+#9275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9276 = ORIENTED_EDGE('',*,*,#9277,.T.);+#9277 = EDGE_CURVE('',#9262,#9278,#9280,.T.);+#9278 = VERTEX_POINT('',#9279);+#9279 = CARTESIAN_POINT('',(-6.015165734066E-02,0.138335931443,0.955));+#9280 = SURFACE_CURVE('',#9281,(#9285),.PCURVE_S1.);+#9281 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9282,#9283,#9284), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9242 = CARTESIAN_POINT('',(-0.526576063368,-1.595811631944E-02,- 1.5450001));-#9243 = CARTESIAN_POINT('',(-0.514879014757,-3.342013888889E-03,- 1.5450001));-#9244 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001- ));-#9245 = PCURVE('',#9147,#9246);-#9246 = DEFINITIONAL_REPRESENTATION('',(#9247),#9251);-#9247 = LINE('',#9248,#9249);-#9248 = CARTESIAN_POINT('',(0.,0.));-#9249 = VECTOR('',#9250,1.);-#9250 = DIRECTION('',(1.,0.));-#9251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9252 = PCURVE('',#8862,#9253);-#9253 = DEFINITIONAL_REPRESENTATION('',(#9254),#9258);-#9254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9255,#9256,#9257),+#9282 = CARTESIAN_POINT('',(-6.73003018426E-02,0.162808768477,0.955));+#9283 = CARTESIAN_POINT('',(-6.73003018426E-02,0.147352239824,0.955));+#9284 = CARTESIAN_POINT('',(-6.015165734066E-02,0.138335931443,0.955));+#9285 = PCURVE('',#8881,#9286);+#9286 = DEFINITIONAL_REPRESENTATION('',(#9287),#9291);+#9287 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9288,#9289,#9290),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9288 = CARTESIAN_POINT('',(7.174405383029E-02,2.87233824132E-02));+#9289 = CARTESIAN_POINT('',(8.720058248313E-02,2.87233824132E-02));+#9290 = CARTESIAN_POINT('',(9.621689086396E-02,3.587202691514E-02));+#9291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9292 = ORIENTED_EDGE('',*,*,#9293,.T.);+#9293 = EDGE_CURVE('',#9278,#9294,#9296,.T.);+#9294 = VERTEX_POINT('',#9295);+#9295 = CARTESIAN_POINT('',(-4.089539872732E-02,0.129319623062,0.955));+#9296 = SURFACE_CURVE('',#9297,(#9301),.PCURVE_S1.);+#9297 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9298,#9299,#9300),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9298 = CARTESIAN_POINT('',(-6.015165734066E-02,0.138335931443,0.955));+#9299 = CARTESIAN_POINT('',(-5.300301283871E-02,0.129319623062,0.955));+#9300 = CARTESIAN_POINT('',(-4.089539872732E-02,0.129319623062,0.955));+#9301 = PCURVE('',#8881,#9302);+#9302 = DEFINITIONAL_REPRESENTATION('',(#9303),#9307);+#9303 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9304,#9305,#9306),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9304 = CARTESIAN_POINT('',(9.621689086396E-02,3.587202691514E-02));+#9305 = CARTESIAN_POINT('',(0.105233199245,4.302067141709E-02));+#9306 = CARTESIAN_POINT('',(0.105233199245,5.512828552848E-02));+#9307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9308 = ORIENTED_EDGE('',*,*,#9309,.T.);+#9309 = EDGE_CURVE('',#9294,#9310,#9312,.T.);+#9310 = VERTEX_POINT('',#9311);+#9311 = CARTESIAN_POINT('',(-1.803261676165E-02,0.138335931443,0.955));+#9312 = SURFACE_CURVE('',#9313,(#9317),.PCURVE_S1.);+#9313 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9314,#9315,#9316),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9314 = CARTESIAN_POINT('',(-4.089539872732E-02,0.129319623062,0.955));+#9315 = CARTESIAN_POINT('',(-2.608289210168E-02,0.129319623062,0.955));+#9316 = CARTESIAN_POINT('',(-1.803261676165E-02,0.138335931443,0.955));+#9317 = PCURVE('',#8881,#9318);+#9318 = DEFINITIONAL_REPRESENTATION('',(#9319),#9323);+#9319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9320,#9321,#9322), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9255 = CARTESIAN_POINT('',(4.002061632E-02,4.327907986112E-02));-#9256 = CARTESIAN_POINT('',(5.1717664931E-02,5.589518229167E-02));-#9257 = CARTESIAN_POINT('',(5.6145833334E-02,6.107530381945E-02));-#9258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9259 = ADVANCED_FACE('',(#9260),#9225,.F.);-#9260 = FACE_BOUND('',#9261,.F.);-#9261 = EDGE_LOOP('',(#9262,#9263,#9286,#9316));-#9262 = ORIENTED_EDGE('',*,*,#9209,.T.);-#9263 = ORIENTED_EDGE('',*,*,#9264,.T.);-#9264 = EDGE_CURVE('',#9187,#9265,#9267,.T.);-#9265 = VERTEX_POINT('',#9266);-#9266 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5050001- ));-#9267 = SURFACE_CURVE('',#9268,(#9272,#9279),.PCURVE_S1.);-#9268 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9269,#9270,#9271),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9269 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5050001- ));-#9270 = CARTESIAN_POINT('',(-0.502095811632,1.203125E-02,1.5050001));-#9271 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5050001- ));-#9272 = PCURVE('',#9225,#9273);-#9273 = DEFINITIONAL_REPRESENTATION('',(#9274),#9278);-#9274 = LINE('',#9275,#9276);-#9275 = CARTESIAN_POINT('',(0.,-4.E-02));-#9276 = VECTOR('',#9277,1.);-#9277 = DIRECTION('',(1.,0.));-#9278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9320 = CARTESIAN_POINT('',(0.105233199245,5.512828552848E-02));+#9321 = CARTESIAN_POINT('',(0.105233199245,6.994079215412E-02));+#9322 = CARTESIAN_POINT('',(9.621689086396E-02,7.799106749415E-02));+#9323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9324 = ORIENTED_EDGE('',*,*,#9325,.T.);+#9325 = EDGE_CURVE('',#9310,#8871,#9326,.T.);+#9326 = SURFACE_CURVE('',#9327,(#9331),.PCURVE_S1.);+#9327 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9328,#9329,#9330),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9328 = CARTESIAN_POINT('',(-1.803261676165E-02,0.138335931443,0.955));+#9329 = CARTESIAN_POINT('',(-9.982341421629E-03,0.147352239824,0.955));+#9330 = CARTESIAN_POINT('',(-9.982341421629E-03,0.16383920372,0.955));+#9331 = PCURVE('',#8881,#9332);+#9332 = DEFINITIONAL_REPRESENTATION('',(#9333),#9337);+#9333 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9334,#9335,#9336),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9334 = CARTESIAN_POINT('',(9.621689086396E-02,7.799106749415E-02));+#9335 = CARTESIAN_POINT('',(8.720058248313E-02,8.604134283417E-02));+#9336 = CARTESIAN_POINT('',(7.071361858677E-02,8.604134283417E-02));+#9337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9338 = SHELL_BASED_SURFACE_MODEL('',(#9339));+#9339 = OPEN_SHELL('',(#9340));+#9340 = ADVANCED_FACE('',(#9341),#9355,.T.);+#9341 = FACE_BOUND('',#9342,.F.);+#9342 = EDGE_LOOP('',(#9343,#9366,#9382,#9398,#9414,#9430,#9446,#9462,+ #9478,#9494,#9510,#9526,#9542,#9558,#9574,#9590,#9606,#9622,#9638,+ #9654,#9670));+#9343 = ORIENTED_EDGE('',*,*,#9344,.T.);+#9344 = EDGE_CURVE('',#9345,#9347,#9349,.T.);+#9345 = VERTEX_POINT('',#9346);+#9346 = CARTESIAN_POINT('',(-6.25345388413E-02,1.983587843782E-02,0.955)+ );+#9347 = VERTEX_POINT('',#9348);+#9348 = CARTESIAN_POINT('',(-6.25345388413E-02,-6.118209258418E-02,0.955+ ));+#9349 = SURFACE_CURVE('',#9350,(#9354),.PCURVE_S1.);+#9350 = LINE('',#9351,#9352);+#9351 = CARTESIAN_POINT('',(-6.25345388413E-02,1.983587843782E-02,0.955)+ );+#9352 = VECTOR('',#9353,1.);+#9353 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#9354 = PCURVE('',#9355,#9360);+#9355 = PLANE('',#9356);+#9356 = AXIS2_PLACEMENT_3D('',#9357,#9358,#9359);+#9357 = CARTESIAN_POINT('',(-9.60236842558E-02,7.573699039894E-02,0.955)+ );+#9358 = DIRECTION('',(0.,0.,1.));+#9359 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#9360 = DEFINITIONAL_REPRESENTATION('',(#9361),#9365);+#9361 = LINE('',#9362,#9363);+#9362 = CARTESIAN_POINT('',(5.590111196112E-02,3.34891454145E-02));+#9363 = VECTOR('',#9364,1.);+#9364 = DIRECTION('',(1.,0.));+#9365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9366 = ORIENTED_EDGE('',*,*,#9367,.T.);+#9367 = EDGE_CURVE('',#9347,#9368,#9370,.T.);+#9368 = VERTEX_POINT('',#9369);+#9369 = CARTESIAN_POINT('',(-9.60236842558E-02,-6.118209258418E-02,0.955+ ));+#9370 = SURFACE_CURVE('',#9371,(#9375),.PCURVE_S1.);+#9371 = LINE('',#9372,#9373);+#9372 = CARTESIAN_POINT('',(-6.25345388413E-02,-6.118209258418E-02,0.955+ ));+#9373 = VECTOR('',#9374,1.);+#9374 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#9375 = PCURVE('',#9355,#9376);+#9376 = DEFINITIONAL_REPRESENTATION('',(#9377),#9381);+#9377 = LINE('',#9378,#9379);+#9378 = CARTESIAN_POINT('',(0.136919082983,3.34891454145E-02));+#9379 = VECTOR('',#9380,1.);+#9380 = DIRECTION('',(0.,-1.));+#9381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9382 = ORIENTED_EDGE('',*,*,#9383,.T.);+#9383 = EDGE_CURVE('',#9368,#9384,#9386,.T.);+#9384 = VERTEX_POINT('',#9385);+#9385 = CARTESIAN_POINT('',(-9.60236842558E-02,6.09244837733E-02,0.955)+ );+#9386 = SURFACE_CURVE('',#9387,(#9391),.PCURVE_S1.);+#9387 = LINE('',#9388,#9389);+#9388 = CARTESIAN_POINT('',(-9.60236842558E-02,-6.118209258418E-02,0.955+ ));+#9389 = VECTOR('',#9390,1.);+#9390 = DIRECTION('',(2.22044604925E-16,1.,0.));+#9391 = PCURVE('',#9355,#9392);+#9392 = DEFINITIONAL_REPRESENTATION('',(#9393),#9397);+#9393 = LINE('',#9394,#9395);+#9394 = CARTESIAN_POINT('',(0.136919082983,3.040214368768E-17));+#9395 = VECTOR('',#9396,1.);+#9396 = DIRECTION('',(-1.,0.));+#9397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9398 = ORIENTED_EDGE('',*,*,#9399,.T.);+#9399 = EDGE_CURVE('',#9384,#9400,#9402,.T.);+#9400 = VERTEX_POINT('',#9401);+#9401 = CARTESIAN_POINT('',(-6.356497408483E-02,6.09244837733E-02,0.955)+ );+#9402 = SURFACE_CURVE('',#9403,(#9407),.PCURVE_S1.);+#9403 = LINE('',#9404,#9405);+#9404 = CARTESIAN_POINT('',(-9.60236842558E-02,6.09244837733E-02,0.955)+ );+#9405 = VECTOR('',#9406,1.);+#9406 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#9407 = PCURVE('',#9355,#9408);+#9408 = DEFINITIONAL_REPRESENTATION('',(#9409),#9413);+#9409 = LINE('',#9410,#9411);+#9410 = CARTESIAN_POINT('',(1.481250662564E-02,3.28903718164E-18));+#9411 = VECTOR('',#9412,1.);+#9412 = DIRECTION('',(0.,1.));+#9413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9279 = PCURVE('',#8808,#9280);-#9280 = DEFINITIONAL_REPRESENTATION('',(#9281),#9285);-#9281 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9282,#9283,#9284),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9282 = CARTESIAN_POINT('',(5.6145833334E-02,6.107530381945E-02));-#9283 = CARTESIAN_POINT('',(6.4500868056E-02,7.126844618056E-02));-#9284 = CARTESIAN_POINT('',(6.7425130209E-02,7.757649739584E-02));-#9285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9414 = ORIENTED_EDGE('',*,*,#9415,.T.);+#9415 = EDGE_CURVE('',#9400,#9416,#9418,.T.);+#9416 = VERTEX_POINT('',#9417);+#9417 = CARTESIAN_POINT('',(-4.166822515996E-02,4.031577890284E-02,0.955+ ));+#9418 = SURFACE_CURVE('',#9419,(#9423),.PCURVE_S1.);+#9419 = LINE('',#9420,#9421);+#9420 = CARTESIAN_POINT('',(-6.356497408483E-02,6.09244837733E-02,0.955)+ );+#9421 = VECTOR('',#9422,1.);+#9422 = DIRECTION('',(0.728199992693,-0.685364699005,0.));+#9423 = PCURVE('',#9355,#9424);+#9424 = DEFINITIONAL_REPRESENTATION('',(#9425),#9429);+#9425 = LINE('',#9426,#9427);+#9426 = CARTESIAN_POINT('',(1.481250662564E-02,3.245871017097E-02));+#9427 = VECTOR('',#9428,1.);+#9428 = DIRECTION('',(0.685364699005,0.728199992693));+#9429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9286 = ORIENTED_EDGE('',*,*,#9287,.F.);-#9287 = EDGE_CURVE('',#9288,#9265,#9290,.T.);-#9288 = VERTEX_POINT('',#9289);-#9289 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001- ));-#9290 = SURFACE_CURVE('',#9291,(#9295,#9302),.PCURVE_S1.);-#9291 = LINE('',#9292,#9293);-#9292 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001- ));-#9293 = VECTOR('',#9294,1.);-#9294 = DIRECTION('',(-0.,-0.,-1.));-#9295 = PCURVE('',#9225,#9296);-#9296 = DEFINITIONAL_REPRESENTATION('',(#9297),#9301);-#9297 = LINE('',#9298,#9299);-#9298 = CARTESIAN_POINT('',(1.,0.));-#9299 = VECTOR('',#9300,1.);-#9300 = DIRECTION('',(0.,-1.));-#9301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9302 = PCURVE('',#9303,#9310);-#9303 = SURFACE_OF_LINEAR_EXTRUSION('',#9304,#9308);-#9304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9305,#9306,#9307),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9305 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001+#9430 = ORIENTED_EDGE('',*,*,#9431,.T.);+#9431 = EDGE_CURVE('',#9416,#9432,#9434,.T.);+#9432 = VERTEX_POINT('',#9433);+#9433 = CARTESIAN_POINT('',(6.375818069299E-03,-4.250545379533E-03,0.955 ));-#9306 = CARTESIAN_POINT('',(-0.496247287326,2.464735243056E-02,1.5450001- ));-#9307 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001- ));-#9308 = VECTOR('',#9309,1.);-#9309 = DIRECTION('',(0.,0.,1.));-#9310 = DEFINITIONAL_REPRESENTATION('',(#9311),#9315);-#9311 = LINE('',#9312,#9313);-#9312 = CARTESIAN_POINT('',(0.,0.));-#9313 = VECTOR('',#9314,1.);-#9314 = DIRECTION('',(0.,-1.));-#9315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9316 = ORIENTED_EDGE('',*,*,#9317,.F.);-#9317 = EDGE_CURVE('',#9210,#9288,#9318,.T.);-#9318 = SURFACE_CURVE('',#9319,(#9323,#9330),.PCURVE_S1.);-#9319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9320,#9321,#9322),+#9434 = SURFACE_CURVE('',#9435,(#9439),.PCURVE_S1.);+#9435 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9436,#9437,#9438), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9320 = CARTESIAN_POINT('',(-0.510450846354,1.838107638889E-03,1.5450001+#9436 = CARTESIAN_POINT('',(-4.166822515996E-02,4.031577890284E-02,0.955 ));-#9321 = CARTESIAN_POINT('',(-0.502095811632,1.203125E-02,1.5450001));-#9322 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001+#9437 = CARTESIAN_POINT('',(-2.640490311528E-03,3.606523352331E-03,0.955 ));-#9323 = PCURVE('',#9225,#9324);-#9324 = DEFINITIONAL_REPRESENTATION('',(#9325),#9329);-#9325 = LINE('',#9326,#9327);-#9326 = CARTESIAN_POINT('',(0.,0.));-#9327 = VECTOR('',#9328,1.);-#9328 = DIRECTION('',(1.,0.));-#9329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9330 = PCURVE('',#8862,#9331);-#9331 = DEFINITIONAL_REPRESENTATION('',(#9332),#9336);-#9332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9333,#9334,#9335),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9333 = CARTESIAN_POINT('',(5.6145833334E-02,6.107530381945E-02));-#9334 = CARTESIAN_POINT('',(6.4500868056E-02,7.126844618056E-02));-#9335 = CARTESIAN_POINT('',(6.7425130209E-02,7.757649739584E-02));-#9336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9337 = ADVANCED_FACE('',(#9338),#9303,.F.);-#9338 = FACE_BOUND('',#9339,.F.);-#9339 = EDGE_LOOP('',(#9340,#9341,#9364,#9394));-#9340 = ORIENTED_EDGE('',*,*,#9287,.T.);-#9341 = ORIENTED_EDGE('',*,*,#9342,.T.);-#9342 = EDGE_CURVE('',#9265,#9343,#9345,.T.);-#9343 = VERTEX_POINT('',#9344);-#9344 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5050001+#9438 = CARTESIAN_POINT('',(6.375818069299E-03,-4.250545379533E-03,0.955 ));-#9345 = SURFACE_CURVE('',#9346,(#9350,#9357),.PCURVE_S1.);-#9346 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9347,#9348,#9349),+#9439 = PCURVE('',#9355,#9440);+#9440 = DEFINITIONAL_REPRESENTATION('',(#9441),#9445);+#9441 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9442,#9443,#9444), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9347 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5050001- ));-#9348 = CARTESIAN_POINT('',(-0.496247287326,2.464735243056E-02,1.5050001- ));-#9349 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5050001- ));-#9350 = PCURVE('',#9303,#9351);-#9351 = DEFINITIONAL_REPRESENTATION('',(#9352),#9356);-#9352 = LINE('',#9353,#9354);-#9353 = CARTESIAN_POINT('',(0.,-4.E-02));-#9354 = VECTOR('',#9355,1.);-#9355 = DIRECTION('',(1.,0.));-#9356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9357 = PCURVE('',#8808,#9358);-#9358 = DEFINITIONAL_REPRESENTATION('',(#9359),#9363);-#9359 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9360,#9361,#9362),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9360 = CARTESIAN_POINT('',(6.7425130209E-02,7.757649739584E-02));-#9361 = CARTESIAN_POINT('',(7.0349392362E-02,8.388454861112E-02));-#9362 = CARTESIAN_POINT('',(7.0349392362E-02,9.048502604167E-02));-#9363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9442 = CARTESIAN_POINT('',(3.54212114961E-02,5.435545909584E-02));+#9443 = CARTESIAN_POINT('',(7.213046704661E-02,9.338319394427E-02));+#9444 = CARTESIAN_POINT('',(7.998753577847E-02,0.102399502325));+#9445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9364 = ORIENTED_EDGE('',*,*,#9365,.F.);-#9365 = EDGE_CURVE('',#9366,#9343,#9368,.T.);-#9366 = VERTEX_POINT('',#9367);-#9367 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001+#9446 = ORIENTED_EDGE('',*,*,#9447,.T.);+#9447 = EDGE_CURVE('',#9432,#9448,#9450,.T.);+#9448 = VERTEX_POINT('',#9449);+#9449 = CARTESIAN_POINT('',(2.601848989896E-02,-1.816142116709E-02,0.955 ));-#9368 = SURFACE_CURVE('',#9369,(#9373,#9380),.PCURVE_S1.);-#9369 = LINE('',#9370,#9371);-#9370 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001- ));-#9371 = VECTOR('',#9372,1.);-#9372 = DIRECTION('',(-0.,-0.,-1.));-#9373 = PCURVE('',#9303,#9374);-#9374 = DEFINITIONAL_REPRESENTATION('',(#9375),#9379);-#9375 = LINE('',#9376,#9377);-#9376 = CARTESIAN_POINT('',(1.,0.));-#9377 = VECTOR('',#9378,1.);-#9378 = DIRECTION('',(0.,-1.));-#9379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9380 = PCURVE('',#9381,#9388);-#9381 = SURFACE_OF_LINEAR_EXTRUSION('',#9382,#9386);-#9382 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9383,#9384,#9385),+#9450 = SURFACE_CURVE('',#9451,(#9455),.PCURVE_S1.);+#9451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9452,#9453,#9454), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9383 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001+#9452 = CARTESIAN_POINT('',(6.375818069299E-03,-4.250545379533E-03,0.955 ));-#9384 = CARTESIAN_POINT('',(-0.496247287326,4.169162326389E-02,1.5450001+#9453 = CARTESIAN_POINT('',(1.745299693717E-02,-1.391087578756E-02,0.955 ));-#9385 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001+#9454 = CARTESIAN_POINT('',(2.601848989896E-02,-1.816142116709E-02,0.955 ));-#9386 = VECTOR('',#9387,1.);-#9387 = DIRECTION('',(0.,0.,1.));-#9388 = DEFINITIONAL_REPRESENTATION('',(#9389),#9393);-#9389 = LINE('',#9390,#9391);-#9390 = CARTESIAN_POINT('',(0.,0.));-#9391 = VECTOR('',#9392,1.);-#9392 = DIRECTION('',(0.,-1.));-#9393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9394 = ORIENTED_EDGE('',*,*,#9395,.F.);-#9395 = EDGE_CURVE('',#9288,#9366,#9396,.T.);-#9396 = SURFACE_CURVE('',#9397,(#9401,#9408),.PCURVE_S1.);-#9397 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9398,#9399,#9400),+#9455 = PCURVE('',#9355,#9456);+#9456 = DEFINITIONAL_REPRESENTATION('',(#9457),#9461);+#9457 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9458,#9459,#9460), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9398 = CARTESIAN_POINT('',(-0.499171549479,1.833930121528E-02,1.5450001- ));-#9399 = CARTESIAN_POINT('',(-0.496247287326,2.464735243056E-02,1.5450001- ));-#9400 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001- ));-#9401 = PCURVE('',#9303,#9402);-#9402 = DEFINITIONAL_REPRESENTATION('',(#9403),#9407);-#9403 = LINE('',#9404,#9405);-#9404 = CARTESIAN_POINT('',(0.,0.));-#9405 = VECTOR('',#9406,1.);-#9406 = DIRECTION('',(1.,0.));-#9407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9458 = CARTESIAN_POINT('',(7.998753577847E-02,0.102399502325));+#9459 = CARTESIAN_POINT('',(8.96478661865E-02,0.113476681193));+#9460 = CARTESIAN_POINT('',(9.389841156603E-02,0.122042174155));+#9461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9408 = PCURVE('',#8862,#9409);-#9409 = DEFINITIONAL_REPRESENTATION('',(#9410),#9414);-#9410 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9411,#9412,#9413),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9411 = CARTESIAN_POINT('',(6.7425130209E-02,7.757649739584E-02));-#9412 = CARTESIAN_POINT('',(7.0349392362E-02,8.388454861112E-02));-#9413 = CARTESIAN_POINT('',(7.0349392362E-02,9.048502604167E-02));-#9414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9415 = ADVANCED_FACE('',(#9416),#9381,.F.);-#9416 = FACE_BOUND('',#9417,.F.);-#9417 = EDGE_LOOP('',(#9418,#9419,#9442,#9472));-#9418 = ORIENTED_EDGE('',*,*,#9365,.T.);-#9419 = ORIENTED_EDGE('',*,*,#9420,.T.);-#9420 = EDGE_CURVE('',#9343,#9421,#9423,.T.);-#9421 = VERTEX_POINT('',#9422);-#9422 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5050001+#9462 = ORIENTED_EDGE('',*,*,#9463,.T.);+#9463 = EDGE_CURVE('',#9448,#9464,#9466,.T.);+#9464 = VERTEX_POINT('',#9465);+#9465 = CARTESIAN_POINT('',(4.295626921437E-02,-2.241196654663E-02,0.955 ));-#9423 = SURFACE_CURVE('',#9424,(#9428,#9435),.PCURVE_S1.);-#9424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9425,#9426,#9427),+#9466 = SURFACE_CURVE('',#9467,(#9471),.PCURVE_S1.);+#9467 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9468,#9469,#9470), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9425 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5050001+#9468 = CARTESIAN_POINT('',(2.601848989896E-02,-1.816142116709E-02,0.955 ));-#9426 = CARTESIAN_POINT('',(-0.496247287326,4.169162326389E-02,1.5050001+#9469 = CARTESIAN_POINT('',(3.458398286074E-02,-2.241196654662E-02,0.955 ));-#9427 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5050001+#9470 = CARTESIAN_POINT('',(4.295626921437E-02,-2.241196654662E-02,0.955 ));-#9428 = PCURVE('',#9381,#9429);-#9429 = DEFINITIONAL_REPRESENTATION('',(#9430),#9434);-#9430 = LINE('',#9431,#9432);-#9431 = CARTESIAN_POINT('',(0.,-4.E-02));-#9432 = VECTOR('',#9433,1.);-#9433 = DIRECTION('',(1.,0.));-#9434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9435 = PCURVE('',#8808,#9436);-#9436 = DEFINITIONAL_REPRESENTATION('',(#9437),#9441);-#9437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9438,#9439,#9440),+#9471 = PCURVE('',#9355,#9472);+#9472 = DEFINITIONAL_REPRESENTATION('',(#9473),#9477);+#9473 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9474,#9475,#9476), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9438 = CARTESIAN_POINT('',(7.0349392362E-02,9.048502604167E-02));-#9439 = CARTESIAN_POINT('',(7.0349392362E-02,0.100928819444));-#9440 = CARTESIAN_POINT('',(6.4208441841E-02,0.106860894097));-#9441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9474 = CARTESIAN_POINT('',(9.389841156603E-02,0.122042174155));+#9475 = CARTESIAN_POINT('',(9.814895694557E-02,0.130607667117));+#9476 = CARTESIAN_POINT('',(9.814895694557E-02,0.13897995347));+#9477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9442 = ORIENTED_EDGE('',*,*,#9443,.F.);-#9443 = EDGE_CURVE('',#9444,#9421,#9446,.T.);-#9444 = VERTEX_POINT('',#9445);-#9445 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001- ));-#9446 = SURFACE_CURVE('',#9447,(#9451,#9458),.PCURVE_S1.);-#9447 = LINE('',#9448,#9449);-#9448 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001- ));-#9449 = VECTOR('',#9450,1.);-#9450 = DIRECTION('',(-0.,-0.,-1.));-#9451 = PCURVE('',#9381,#9452);-#9452 = DEFINITIONAL_REPRESENTATION('',(#9453),#9457);-#9453 = LINE('',#9454,#9455);-#9454 = CARTESIAN_POINT('',(1.,0.));-#9455 = VECTOR('',#9456,1.);-#9456 = DIRECTION('',(0.,-1.));-#9457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9458 = PCURVE('',#9459,#9466);-#9459 = SURFACE_OF_LINEAR_EXTRUSION('',#9460,#9464);-#9460 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9461,#9462,#9463),+#9478 = ORIENTED_EDGE('',*,*,#9479,.T.);+#9479 = EDGE_CURVE('',#9464,#9480,#9482,.T.);+#9480 = VERTEX_POINT('',#9481);+#9481 = CARTESIAN_POINT('',(6.28565498549E-02,-1.461930001748E-02,0.955)+ );+#9482 = SURFACE_CURVE('',#9483,(#9487),.PCURVE_S1.);+#9483 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9484,#9485,#9486), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9461 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001- ));-#9462 = CARTESIAN_POINT('',(-0.508529188368,5.355577256944E-02,1.5450001- ));-#9463 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001+#9484 = CARTESIAN_POINT('',(4.295626921437E-02,-2.241196654662E-02,0.955 ));-#9464 = VECTOR('',#9465,1.);-#9465 = DIRECTION('',(0.,0.,1.));-#9466 = DEFINITIONAL_REPRESENTATION('',(#9467),#9471);-#9467 = LINE('',#9468,#9469);-#9468 = CARTESIAN_POINT('',(0.,0.));-#9469 = VECTOR('',#9470,1.);-#9470 = DIRECTION('',(0.,-1.));-#9471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9472 = ORIENTED_EDGE('',*,*,#9473,.F.);-#9473 = EDGE_CURVE('',#9366,#9444,#9474,.T.);-#9474 = SURFACE_CURVE('',#9475,(#9479,#9486),.PCURVE_S1.);-#9475 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9476,#9477,#9478),+#9485 = CARTESIAN_POINT('',(5.58367097584E-02,-2.241196654662E-02,0.955)+ );+#9486 = CARTESIAN_POINT('',(6.28565498549E-02,-1.461930001748E-02,0.955)+ );+#9487 = PCURVE('',#9355,#9488);+#9488 = DEFINITIONAL_REPRESENTATION('',(#9489),#9493);+#9489 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9490,#9491,#9492), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9476 = CARTESIAN_POINT('',(-0.496247287326,3.124782986111E-02,1.5450001- ));-#9477 = CARTESIAN_POINT('',(-0.496247287326,4.169162326389E-02,1.5450001- ));-#9478 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001- ));-#9479 = PCURVE('',#9381,#9480);-#9480 = DEFINITIONAL_REPRESENTATION('',(#9481),#9485);-#9481 = LINE('',#9482,#9483);-#9482 = CARTESIAN_POINT('',(0.,0.));-#9483 = VECTOR('',#9484,1.);-#9484 = DIRECTION('',(1.,0.));-#9485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9486 = PCURVE('',#8862,#9487);-#9487 = DEFINITIONAL_REPRESENTATION('',(#9488),#9492);-#9488 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9489,#9490,#9491),+#9490 = CARTESIAN_POINT('',(9.814895694557E-02,0.13897995347));+#9491 = CARTESIAN_POINT('',(9.814895694557E-02,0.151860394014));+#9492 = CARTESIAN_POINT('',(9.035629041642E-02,0.158880234111));+#9493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9494 = ORIENTED_EDGE('',*,*,#9495,.T.);+#9495 = EDGE_CURVE('',#9480,#9496,#9498,.T.);+#9496 = VERTEX_POINT('',#9497);+#9497 = CARTESIAN_POINT('',(6.98763899514E-02,7.470655515542E-03,0.955)+ );+#9498 = SURFACE_CURVE('',#9499,(#9503),.PCURVE_S1.);+#9499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9500,#9501,#9502), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9489 = CARTESIAN_POINT('',(7.0349392362E-02,9.048502604167E-02));-#9490 = CARTESIAN_POINT('',(7.0349392362E-02,0.100928819444));-#9491 = CARTESIAN_POINT('',(6.4208441841E-02,0.106860894097));-#9492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9493 = ADVANCED_FACE('',(#9494),#9459,.F.);-#9494 = FACE_BOUND('',#9495,.F.);-#9495 = EDGE_LOOP('',(#9496,#9497,#9520,#9550));-#9496 = ORIENTED_EDGE('',*,*,#9443,.T.);-#9497 = ORIENTED_EDGE('',*,*,#9498,.T.);-#9498 = EDGE_CURVE('',#9421,#9499,#9501,.T.);-#9499 = VERTEX_POINT('',#9500);-#9500 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5050001- ));-#9501 = SURFACE_CURVE('',#9502,(#9506,#9513),.PCURVE_S1.);-#9502 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9503,#9504,#9505),+#9500 = CARTESIAN_POINT('',(6.28565498549E-02,-1.461930001748E-02,0.955)+ );+#9501 = CARTESIAN_POINT('',(6.98763899514E-02,-6.826633488339E-03,0.955)+ );+#9502 = CARTESIAN_POINT('',(6.98763899514E-02,7.470655515542E-03,0.955)+ );+#9503 = PCURVE('',#9355,#9504);+#9504 = DEFINITIONAL_REPRESENTATION('',(#9505),#9509);+#9505 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9506,#9507,#9508), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9503 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5050001- ));-#9504 = CARTESIAN_POINT('',(-0.508529188368,5.355577256944E-02,1.5050001- ));-#9505 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5050001- ));-#9506 = PCURVE('',#9459,#9507);-#9507 = DEFINITIONAL_REPRESENTATION('',(#9508),#9512);-#9508 = LINE('',#9509,#9510);-#9509 = CARTESIAN_POINT('',(0.,-4.E-02));-#9510 = VECTOR('',#9511,1.);-#9511 = DIRECTION('',(1.,0.));-#9512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9506 = CARTESIAN_POINT('',(9.035629041642E-02,0.158880234111));+#9507 = CARTESIAN_POINT('',(8.256362388728E-02,0.165900074207));+#9508 = CARTESIAN_POINT('',(6.82663348834E-02,0.165900074207));+#9509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9513 = PCURVE('',#8808,#9514);-#9514 = DEFINITIONAL_REPRESENTATION('',(#9515),#9519);+#9510 = ORIENTED_EDGE('',*,*,#9511,.T.);+#9511 = EDGE_CURVE('',#9496,#9512,#9514,.T.);+#9512 = VERTEX_POINT('',#9513);+#9513 = CARTESIAN_POINT('',(6.581905118003E-02,3.033343748121E-02,0.955)+ );+#9514 = SURFACE_CURVE('',#9515,(#9519),.PCURVE_S1.); #9515 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9516,#9517,#9518), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9516 = CARTESIAN_POINT('',(6.4208441841E-02,0.106860894097));-#9517 = CARTESIAN_POINT('',(5.806749132E-02,0.11279296875));-#9518 = CARTESIAN_POINT('',(4.7373046875E-02,0.11279296875));-#9519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9516 = CARTESIAN_POINT('',(6.98763899514E-02,7.470655515542E-03,0.955)+ );+#9517 = CARTESIAN_POINT('',(6.98763899514E-02,1.764620354533E-02,0.955)+ );+#9518 = CARTESIAN_POINT('',(6.581905118003E-02,3.033343748121E-02,0.955)+ );+#9519 = PCURVE('',#9355,#9520);+#9520 = DEFINITIONAL_REPRESENTATION('',(#9521),#9525);+#9521 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9522,#9523,#9524),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9522 = CARTESIAN_POINT('',(6.82663348834E-02,0.165900074207));+#9523 = CARTESIAN_POINT('',(5.809078685361E-02,0.165900074207));+#9524 = CARTESIAN_POINT('',(4.540355291773E-02,0.161842735436));+#9525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9520 = ORIENTED_EDGE('',*,*,#9521,.F.);-#9521 = EDGE_CURVE('',#9522,#9499,#9524,.T.);-#9522 = VERTEX_POINT('',#9523);-#9523 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001- ));-#9524 = SURFACE_CURVE('',#9525,(#9529,#9536),.PCURVE_S1.);-#9525 = LINE('',#9526,#9527);-#9526 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001- ));-#9527 = VECTOR('',#9528,1.);-#9528 = DIRECTION('',(-0.,-0.,-1.));-#9529 = PCURVE('',#9459,#9530);-#9530 = DEFINITIONAL_REPRESENTATION('',(#9531),#9535);-#9531 = LINE('',#9532,#9533);-#9532 = CARTESIAN_POINT('',(1.,0.));-#9533 = VECTOR('',#9534,1.);-#9534 = DIRECTION('',(0.,-1.));-#9535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9536 = PCURVE('',#9537,#9544);-#9537 = SURFACE_OF_LINEAR_EXTRUSION('',#9538,#9542);-#9538 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9539,#9540,#9541),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9539 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001- ));-#9540 = CARTESIAN_POINT('',(-0.52682671441,5.355577256944E-02,1.5450001)+#9526 = ORIENTED_EDGE('',*,*,#9527,.T.);+#9527 = EDGE_CURVE('',#9512,#9528,#9530,.T.);+#9528 = VERTEX_POINT('',#9529);+#9529 = CARTESIAN_POINT('',(5.403344808224E-02,5.680274279921E-02,0.955) );-#9541 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9542 = VECTOR('',#9543,1.);-#9543 = DIRECTION('',(0.,0.,1.));-#9544 = DEFINITIONAL_REPRESENTATION('',(#9545),#9549);-#9545 = LINE('',#9546,#9547);-#9546 = CARTESIAN_POINT('',(0.,0.));-#9547 = VECTOR('',#9548,1.);-#9548 = DIRECTION('',(0.,-1.));-#9549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9550 = ORIENTED_EDGE('',*,*,#9551,.F.);-#9551 = EDGE_CURVE('',#9444,#9522,#9552,.T.);-#9552 = SURFACE_CURVE('',#9553,(#9557,#9564),.PCURVE_S1.);-#9553 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9554,#9555,#9556),+#9530 = SURFACE_CURVE('',#9531,(#9535),.PCURVE_S1.);+#9531 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9532,#9533,#9534), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9554 = CARTESIAN_POINT('',(-0.502388237847,4.762369791667E-02,1.5450001- ));-#9555 = CARTESIAN_POINT('',(-0.508529188368,5.355577256944E-02,1.5450001- ));-#9556 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001- ));-#9557 = PCURVE('',#9459,#9558);-#9558 = DEFINITIONAL_REPRESENTATION('',(#9559),#9563);-#9559 = LINE('',#9560,#9561);-#9560 = CARTESIAN_POINT('',(0.,0.));-#9561 = VECTOR('',#9562,1.);-#9562 = DIRECTION('',(1.,0.));-#9563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9564 = PCURVE('',#8862,#9565);-#9565 = DEFINITIONAL_REPRESENTATION('',(#9566),#9570);-#9566 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9567,#9568,#9569),+#9532 = CARTESIAN_POINT('',(6.581905118003E-02,3.033343748121E-02,0.955)+ );+#9533 = CARTESIAN_POINT('',(6.176171240866E-02,4.302067141709E-02,0.955)+ );+#9534 = CARTESIAN_POINT('',(5.403344808224E-02,5.680274279921E-02,0.955)+ );+#9535 = PCURVE('',#9355,#9536);+#9536 = DEFINITIONAL_REPRESENTATION('',(#9537),#9541);+#9537 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9538,#9539,#9540), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9567 = CARTESIAN_POINT('',(6.4208441841E-02,0.106860894097));-#9568 = CARTESIAN_POINT('',(5.806749132E-02,0.11279296875));-#9569 = CARTESIAN_POINT('',(4.7373046875E-02,0.11279296875));-#9570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9571 = ADVANCED_FACE('',(#9572),#9537,.F.);-#9572 = FACE_BOUND('',#9573,.F.);-#9573 = EDGE_LOOP('',(#9574,#9575,#9598,#9628));-#9574 = ORIENTED_EDGE('',*,*,#9521,.T.);-#9575 = ORIENTED_EDGE('',*,*,#9576,.T.);-#9576 = EDGE_CURVE('',#9499,#9577,#9579,.T.);-#9577 = VERTEX_POINT('',#9578);-#9578 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5050001- ));-#9579 = SURFACE_CURVE('',#9580,(#9584,#9591),.PCURVE_S1.);-#9580 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9581,#9582,#9583),+#9538 = CARTESIAN_POINT('',(4.540355291773E-02,0.161842735436));+#9539 = CARTESIAN_POINT('',(3.271631898186E-02,0.157785396664));+#9540 = CARTESIAN_POINT('',(1.893424759974E-02,0.150057132338));+#9541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9542 = ORIENTED_EDGE('',*,*,#9543,.T.);+#9543 = EDGE_CURVE('',#9528,#9544,#9546,.T.);+#9544 = VERTEX_POINT('',#9545);+#9545 = CARTESIAN_POINT('',(8.945465957834E-02,5.680274279921E-02,0.955)+ );+#9546 = SURFACE_CURVE('',#9547,(#9551),.PCURVE_S1.);+#9547 = LINE('',#9548,#9549);+#9548 = CARTESIAN_POINT('',(5.403344808224E-02,5.680274279921E-02,0.955)+ );+#9549 = VECTOR('',#9550,1.);+#9550 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#9551 = PCURVE('',#9355,#9552);+#9552 = DEFINITIONAL_REPRESENTATION('',(#9553),#9557);+#9553 = LINE('',#9554,#9555);+#9554 = CARTESIAN_POINT('',(1.893424759974E-02,0.150057132338));+#9555 = VECTOR('',#9556,1.);+#9556 = DIRECTION('',(0.,1.));+#9557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9558 = ORIENTED_EDGE('',*,*,#9559,.T.);+#9559 = EDGE_CURVE('',#9544,#9560,#9562,.T.);+#9560 = VERTEX_POINT('',#9561);+#9561 = CARTESIAN_POINT('',(9.711852170204E-02,2.981821985945E-02,0.955)+ );+#9562 = SURFACE_CURVE('',#9563,(#9567),.PCURVE_S1.);+#9563 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9564,#9565,#9566), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9581 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5050001- ));-#9582 = CARTESIAN_POINT('',(-0.52682671441,5.355577256944E-02,1.5050001)+#9564 = CARTESIAN_POINT('',(8.945465957834E-02,5.680274279921E-02,0.955) );-#9583 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5050001- ));-#9584 = PCURVE('',#9537,#9585);-#9585 = DEFINITIONAL_REPRESENTATION('',(#9586),#9590);-#9586 = LINE('',#9587,#9588);-#9587 = CARTESIAN_POINT('',(0.,-4.E-02));-#9588 = VECTOR('',#9589,1.);-#9589 = DIRECTION('',(1.,0.));-#9590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9591 = PCURVE('',#8808,#9592);-#9592 = DEFINITIONAL_REPRESENTATION('',(#9593),#9597);-#9593 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9594,#9595,#9596),+#9565 = CARTESIAN_POINT('',(9.447803139052E-02,4.302067141709E-02,0.955)+ );+#9566 = CARTESIAN_POINT('',(9.711852170204E-02,2.981821985945E-02,0.955)+ );+#9567 = PCURVE('',#9355,#9568);+#9568 = DEFINITIONAL_REPRESENTATION('',(#9569),#9573);+#9569 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9570,#9571,#9572), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9594 = CARTESIAN_POINT('',(4.7373046875E-02,0.11279296875));-#9595 = CARTESIAN_POINT('',(3.9769965278E-02,0.11279296875));-#9596 = CARTESIAN_POINT('',(3.1414930556E-02,0.110035807292));-#9597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9570 = CARTESIAN_POINT('',(1.893424759974E-02,0.185478343834));+#9571 = CARTESIAN_POINT('',(3.271631898186E-02,0.190501715646));+#9572 = CARTESIAN_POINT('',(4.591877053949E-02,0.193142205958));+#9573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9598 = ORIENTED_EDGE('',*,*,#9599,.F.);-#9599 = EDGE_CURVE('',#9600,#9577,#9602,.T.);-#9600 = VERTEX_POINT('',#9601);-#9601 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9602 = SURFACE_CURVE('',#9603,(#9607,#9614),.PCURVE_S1.);-#9603 = LINE('',#9604,#9605);-#9604 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9605 = VECTOR('',#9606,1.);-#9606 = DIRECTION('',(-0.,-0.,-1.));-#9607 = PCURVE('',#9537,#9608);-#9608 = DEFINITIONAL_REPRESENTATION('',(#9609),#9613);-#9609 = LINE('',#9610,#9611);-#9610 = CARTESIAN_POINT('',(1.,0.));-#9611 = VECTOR('',#9612,1.);-#9612 = DIRECTION('',(0.,-1.));-#9613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9614 = PCURVE('',#9615,#9622);-#9615 = SURFACE_OF_LINEAR_EXTRUSION('',#9616,#9620);-#9616 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9617,#9618,#9619),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9617 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9618 = CARTESIAN_POINT('',(-0.543536783854,4.804144965278E-02,1.5450001- ));-#9619 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001- ));-#9620 = VECTOR('',#9621,1.);-#9621 = DIRECTION('',(0.,0.,1.));-#9622 = DEFINITIONAL_REPRESENTATION('',(#9623),#9627);-#9623 = LINE('',#9624,#9625);-#9624 = CARTESIAN_POINT('',(0.,0.));-#9625 = VECTOR('',#9626,1.);-#9626 = DIRECTION('',(0.,-1.));-#9627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9628 = ORIENTED_EDGE('',*,*,#9629,.F.);-#9629 = EDGE_CURVE('',#9522,#9600,#9630,.T.);-#9630 = SURFACE_CURVE('',#9631,(#9635,#9642),.PCURVE_S1.);-#9631 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9632,#9633,#9634),+#9574 = ORIENTED_EDGE('',*,*,#9575,.T.);+#9575 = EDGE_CURVE('',#9560,#9576,#9578,.T.);+#9576 = VERTEX_POINT('',#9577);+#9577 = CARTESIAN_POINT('',(9.975901201357E-02,4.508154190413E-03,0.955)+ );+#9578 = SURFACE_CURVE('',#9579,(#9583),.PCURVE_S1.);+#9579 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9580,#9581,#9582), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9632 = CARTESIAN_POINT('',(-0.519223632813,5.355577256944E-02,1.5450001- ));-#9633 = CARTESIAN_POINT('',(-0.52682671441,5.355577256944E-02,1.5450001)+#9580 = CARTESIAN_POINT('',(9.711852170204E-02,2.981821985945E-02,0.955) );-#9634 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9635 = PCURVE('',#9537,#9636);-#9636 = DEFINITIONAL_REPRESENTATION('',(#9637),#9641);-#9637 = LINE('',#9638,#9639);-#9638 = CARTESIAN_POINT('',(0.,0.));-#9639 = VECTOR('',#9640,1.);-#9640 = DIRECTION('',(1.,0.));-#9641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9642 = PCURVE('',#8862,#9643);-#9643 = DEFINITIONAL_REPRESENTATION('',(#9644),#9648);-#9644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9645,#9646,#9647),+#9581 = CARTESIAN_POINT('',(9.975901201357E-02,1.661576830181E-02,0.955)+ );+#9582 = CARTESIAN_POINT('',(9.975901201357E-02,4.508154190414E-03,0.955)+ );+#9583 = PCURVE('',#9355,#9584);+#9584 = DEFINITIONAL_REPRESENTATION('',(#9585),#9589);+#9585 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9586,#9587,#9588), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9645 = CARTESIAN_POINT('',(4.7373046875E-02,0.11279296875));-#9646 = CARTESIAN_POINT('',(3.9769965278E-02,0.11279296875));-#9647 = CARTESIAN_POINT('',(3.1414930556E-02,0.110035807292));-#9648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9649 = ADVANCED_FACE('',(#9650),#9615,.F.);-#9650 = FACE_BOUND('',#9651,.F.);-#9651 = EDGE_LOOP('',(#9652,#9653,#9676,#9704));-#9652 = ORIENTED_EDGE('',*,*,#9599,.T.);-#9653 = ORIENTED_EDGE('',*,*,#9654,.T.);-#9654 = EDGE_CURVE('',#9577,#9655,#9657,.T.);-#9655 = VERTEX_POINT('',#9656);-#9656 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5050001+#9586 = CARTESIAN_POINT('',(4.591877053949E-02,0.193142205958));+#9587 = CARTESIAN_POINT('',(5.912122209713E-02,0.195782696269));+#9588 = CARTESIAN_POINT('',(7.122883620853E-02,0.195782696269));+#9589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9590 = ORIENTED_EDGE('',*,*,#9591,.T.);+#9591 = EDGE_CURVE('',#9576,#9592,#9594,.T.);+#9592 = VERTEX_POINT('',#9593);+#9593 = CARTESIAN_POINT('',(8.552612521241E-02,-4.347148683613E-02,0.955 ));-#9657 = SURFACE_CURVE('',#9658,(#9662,#9669),.PCURVE_S1.);-#9658 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9659,#9660,#9661),+#9594 = SURFACE_CURVE('',#9595,(#9599),.PCURVE_S1.);+#9595 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9596,#9597,#9598), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9659 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5050001- ));-#9660 = CARTESIAN_POINT('',(-0.543536783854,4.804144965278E-02,1.5050001+#9596 = CARTESIAN_POINT('',(9.975901201357E-02,4.508154190414E-03,0.955)+ );+#9597 = CARTESIAN_POINT('',(9.975901201357E-02,-2.601848989896E-02,0.955 ));-#9661 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5050001+#9598 = CARTESIAN_POINT('',(8.552612521241E-02,-4.347148683613E-02,0.955 ));-#9662 = PCURVE('',#9615,#9663);-#9663 = DEFINITIONAL_REPRESENTATION('',(#9664),#9668);-#9664 = LINE('',#9665,#9666);-#9665 = CARTESIAN_POINT('',(0.,-4.E-02));-#9666 = VECTOR('',#9667,1.);-#9667 = DIRECTION('',(1.,0.));-#9668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9669 = PCURVE('',#8808,#9670);-#9670 = DEFINITIONAL_REPRESENTATION('',(#9671),#9675);-#9671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9672,#9673,#9674),+#9599 = PCURVE('',#9355,#9600);+#9600 = DEFINITIONAL_REPRESENTATION('',(#9601),#9605);+#9601 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9602,#9603,#9604), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9672 = CARTESIAN_POINT('',(3.1414930556E-02,0.110035807292));-#9673 = CARTESIAN_POINT('',(2.3059895834E-02,0.107278645833));-#9674 = CARTESIAN_POINT('',(1.3702256945E-02,0.101680772569));-#9675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9602 = CARTESIAN_POINT('',(7.122883620853E-02,0.195782696269));+#9603 = CARTESIAN_POINT('',(0.101755480298,0.195782696269));+#9604 = CARTESIAN_POINT('',(0.119208477235,0.181549809468));+#9605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9676 = ORIENTED_EDGE('',*,*,#9677,.F.);-#9677 = EDGE_CURVE('',#9678,#9655,#9680,.T.);-#9678 = VERTEX_POINT('',#9679);-#9679 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001- ));-#9680 = SURFACE_CURVE('',#9681,(#9685,#9692),.PCURVE_S1.);-#9681 = LINE('',#9682,#9683);-#9682 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001- ));-#9683 = VECTOR('',#9684,1.);-#9684 = DIRECTION('',(-0.,-0.,-1.));-#9685 = PCURVE('',#9615,#9686);-#9686 = DEFINITIONAL_REPRESENTATION('',(#9687),#9691);-#9687 = LINE('',#9688,#9689);-#9688 = CARTESIAN_POINT('',(1.,0.));-#9689 = VECTOR('',#9690,1.);-#9690 = DIRECTION('',(0.,-1.));-#9691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9692 = PCURVE('',#9693,#9698);-#9693 = PLANE('',#9694);-#9694 = AXIS2_PLACEMENT_3D('',#9695,#9696,#9697);-#9695 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001- ));-#9696 = DIRECTION('',(1.,0.,0.));-#9697 = DIRECTION('',(-0.,1.,0.));-#9698 = DEFINITIONAL_REPRESENTATION('',(#9699),#9703);-#9699 = LINE('',#9700,#9701);-#9700 = CARTESIAN_POINT('',(0.,0.));-#9701 = VECTOR('',#9702,1.);-#9702 = DIRECTION('',(0.,-1.));-#9703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9704 = ORIENTED_EDGE('',*,*,#9705,.F.);-#9705 = EDGE_CURVE('',#9600,#9678,#9706,.T.);-#9706 = SURFACE_CURVE('',#9707,(#9711,#9718),.PCURVE_S1.);-#9707 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9708,#9709,#9710),+#9606 = ORIENTED_EDGE('',*,*,#9607,.T.);+#9607 = EDGE_CURVE('',#9592,#9608,#9610,.T.);+#9608 = VERTEX_POINT('',#9609);+#9609 = CARTESIAN_POINT('',(4.669159697214E-02,-6.09244837733E-02,0.955)+ );+#9610 = SURFACE_CURVE('',#9611,(#9615),.PCURVE_S1.);+#9611 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9612,#9613,#9614), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9708 = CARTESIAN_POINT('',(-0.535181749132,5.079861111111E-02,1.5450001- ));-#9709 = CARTESIAN_POINT('',(-0.543536783854,4.804144965278E-02,1.5450001- ));-#9710 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001+#9612 = CARTESIAN_POINT('',(8.552612521241E-02,-4.347148683613E-02,0.955 ));-#9711 = PCURVE('',#9615,#9712);-#9712 = DEFINITIONAL_REPRESENTATION('',(#9713),#9717);-#9713 = LINE('',#9714,#9715);-#9714 = CARTESIAN_POINT('',(0.,0.));-#9715 = VECTOR('',#9716,1.);-#9716 = DIRECTION('',(1.,0.));-#9717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9718 = PCURVE('',#8862,#9719);-#9719 = DEFINITIONAL_REPRESENTATION('',(#9720),#9724);-#9720 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9721,#9722,#9723),+#9613 = CARTESIAN_POINT('',(7.129323841125E-02,-6.09244837733E-02,0.955)+ );+#9614 = CARTESIAN_POINT('',(4.669159697214E-02,-6.09244837733E-02,0.955)+ );+#9615 = PCURVE('',#9355,#9616);+#9616 = DEFINITIONAL_REPRESENTATION('',(#9617),#9621);+#9617 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9618,#9619,#9620), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9721 = CARTESIAN_POINT('',(3.1414930556E-02,0.110035807292));-#9722 = CARTESIAN_POINT('',(2.3059895834E-02,0.107278645833));-#9723 = CARTESIAN_POINT('',(1.3702256945E-02,0.101680772569));-#9724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9725 = ADVANCED_FACE('',(#9726),#9693,.F.);-#9726 = FACE_BOUND('',#9727,.F.);-#9727 = EDGE_LOOP('',(#9728,#9729,#9752,#9782));-#9728 = ORIENTED_EDGE('',*,*,#9677,.T.);-#9729 = ORIENTED_EDGE('',*,*,#9730,.T.);-#9730 = EDGE_CURVE('',#9655,#9731,#9733,.T.);-#9731 = VERTEX_POINT('',#9732);-#9732 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5050001- ));-#9733 = SURFACE_CURVE('',#9734,(#9738,#9745),.PCURVE_S1.);-#9734 = LINE('',#9735,#9736);-#9735 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5050001- ));-#9736 = VECTOR('',#9737,1.);-#9737 = DIRECTION('',(0.,1.,0.));-#9738 = PCURVE('',#9693,#9739);-#9739 = DEFINITIONAL_REPRESENTATION('',(#9740),#9744);-#9740 = LINE('',#9741,#9742);-#9741 = CARTESIAN_POINT('',(0.,-4.E-02));-#9742 = VECTOR('',#9743,1.);-#9743 = DIRECTION('',(1.,0.));-#9744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9745 = PCURVE('',#8808,#9746);-#9746 = DEFINITIONAL_REPRESENTATION('',(#9747),#9751);-#9747 = LINE('',#9748,#9749);-#9748 = CARTESIAN_POINT('',(1.3702256945E-02,0.101680772569));-#9749 = VECTOR('',#9750,1.);-#9750 = DIRECTION('',(0.,1.));-#9751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9618 = CARTESIAN_POINT('',(0.119208477235,0.181549809468));+#9619 = CARTESIAN_POINT('',(0.136661474172,0.167316922667));+#9620 = CARTESIAN_POINT('',(0.136661474172,0.142715281228));+#9621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9752 = ORIENTED_EDGE('',*,*,#9753,.F.);-#9753 = EDGE_CURVE('',#9754,#9731,#9756,.T.);-#9754 = VERTEX_POINT('',#9755);-#9755 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5450001- ));-#9756 = SURFACE_CURVE('',#9757,(#9761,#9768),.PCURVE_S1.);-#9757 = LINE('',#9758,#9759);-#9758 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5450001- ));-#9759 = VECTOR('',#9760,1.);-#9760 = DIRECTION('',(-0.,-0.,-1.));-#9761 = PCURVE('',#9693,#9762);-#9762 = DEFINITIONAL_REPRESENTATION('',(#9763),#9767);-#9763 = LINE('',#9764,#9765);-#9764 = CARTESIAN_POINT('',(1.704427083333E-02,0.));-#9765 = VECTOR('',#9766,1.);-#9766 = DIRECTION('',(0.,-1.));-#9767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9768 = PCURVE('',#9769,#9776);-#9769 = SURFACE_OF_LINEAR_EXTRUSION('',#9770,#9774);-#9770 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9771,#9772,#9773),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9771 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5450001- ));-#9772 = CARTESIAN_POINT('',(-0.544288736979,6.358181423611E-02,1.5450001- ));-#9773 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5450001- ));-#9774 = VECTOR('',#9775,1.);-#9775 = DIRECTION('',(0.,0.,1.));-#9776 = DEFINITIONAL_REPRESENTATION('',(#9777),#9781);-#9777 = LINE('',#9778,#9779);-#9778 = CARTESIAN_POINT('',(0.,0.));-#9779 = VECTOR('',#9780,1.);-#9780 = DIRECTION('',(0.,-1.));-#9781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9782 = ORIENTED_EDGE('',*,*,#9783,.F.);-#9783 = EDGE_CURVE('',#9678,#9754,#9784,.T.);-#9784 = SURFACE_CURVE('',#9785,(#9789,#9796),.PCURVE_S1.);-#9785 = LINE('',#9786,#9787);-#9786 = CARTESIAN_POINT('',(-0.552894422743,4.244357638889E-02,1.5450001+#9622 = ORIENTED_EDGE('',*,*,#9623,.T.);+#9623 = EDGE_CURVE('',#9608,#9624,#9626,.T.);+#9624 = VERTEX_POINT('',#9625);+#9625 = CARTESIAN_POINT('',(2.543887007447E-02,-5.712475381281E-02,0.955 ));-#9787 = VECTOR('',#9788,1.);-#9788 = DIRECTION('',(0.,1.,0.));-#9789 = PCURVE('',#9693,#9790);-#9790 = DEFINITIONAL_REPRESENTATION('',(#9791),#9795);-#9791 = LINE('',#9792,#9793);-#9792 = CARTESIAN_POINT('',(0.,0.));-#9793 = VECTOR('',#9794,1.);-#9794 = DIRECTION('',(1.,0.));-#9795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9796 = PCURVE('',#8862,#9797);-#9797 = DEFINITIONAL_REPRESENTATION('',(#9798),#9802);-#9798 = LINE('',#9799,#9800);-#9799 = CARTESIAN_POINT('',(1.3702256945E-02,0.101680772569));-#9800 = VECTOR('',#9801,1.);-#9801 = DIRECTION('',(0.,1.));-#9802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9803 = ADVANCED_FACE('',(#9804),#9769,.F.);-#9804 = FACE_BOUND('',#9805,.F.);-#9805 = EDGE_LOOP('',(#9806,#9807,#9830,#9860));-#9806 = ORIENTED_EDGE('',*,*,#9753,.T.);-#9807 = ORIENTED_EDGE('',*,*,#9808,.T.);-#9808 = EDGE_CURVE('',#9731,#9809,#9811,.T.);-#9809 = VERTEX_POINT('',#9810);-#9810 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5050001- ));-#9811 = SURFACE_CURVE('',#9812,(#9816,#9823),.PCURVE_S1.);-#9812 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9813,#9814,#9815),+#9626 = SURFACE_CURVE('',#9627,(#9631),.PCURVE_S1.);+#9627 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9628,#9629,#9630), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9813 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5050001- ));-#9814 = CARTESIAN_POINT('',(-0.544288736979,6.358181423611E-02,1.5050001- ));-#9815 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5050001+#9628 = CARTESIAN_POINT('',(4.669159697214E-02,-6.09244837733E-02,0.955)+ );+#9629 = CARTESIAN_POINT('',(3.535680929338E-02,-6.09244837733E-02,0.955)+ );+#9630 = CARTESIAN_POINT('',(2.543887007447E-02,-5.712475381281E-02,0.955 ));-#9816 = PCURVE('',#9769,#9817);-#9817 = DEFINITIONAL_REPRESENTATION('',(#9818),#9822);-#9818 = LINE('',#9819,#9820);-#9819 = CARTESIAN_POINT('',(0.,-4.E-02));-#9820 = VECTOR('',#9821,1.);-#9821 = DIRECTION('',(1.,0.));-#9822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9823 = PCURVE('',#8808,#9824);-#9824 = DEFINITIONAL_REPRESENTATION('',(#9825),#9829);-#9825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9826,#9827,#9828),+#9631 = PCURVE('',#9355,#9632);+#9632 = DEFINITIONAL_REPRESENTATION('',(#9633),#9637);+#9633 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9634,#9635,#9636), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9826 = CARTESIAN_POINT('',(1.3702256945E-02,0.118725043403));-#9827 = CARTESIAN_POINT('',(2.2307942709E-02,0.122819010417));-#9828 = CARTESIAN_POINT('',(3.0621202257E-02,0.124907769097));-#9829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9634 = CARTESIAN_POINT('',(0.136661474172,0.142715281228));+#9635 = CARTESIAN_POINT('',(0.136661474172,0.131380493549));+#9636 = CARTESIAN_POINT('',(0.132861744212,0.12146255433));+#9637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9830 = ORIENTED_EDGE('',*,*,#9831,.F.);-#9831 = EDGE_CURVE('',#9832,#9809,#9834,.T.);-#9832 = VERTEX_POINT('',#9833);-#9833 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5450001- ));-#9834 = SURFACE_CURVE('',#9835,(#9839,#9846),.PCURVE_S1.);-#9835 = LINE('',#9836,#9837);-#9836 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5450001- ));-#9837 = VECTOR('',#9838,1.);-#9838 = DIRECTION('',(-0.,-0.,-1.));-#9839 = PCURVE('',#9769,#9840);-#9840 = DEFINITIONAL_REPRESENTATION('',(#9841),#9845);-#9841 = LINE('',#9842,#9843);-#9842 = CARTESIAN_POINT('',(1.,0.));-#9843 = VECTOR('',#9844,1.);-#9844 = DIRECTION('',(0.,-1.));-#9845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9846 = PCURVE('',#9847,#9854);-#9847 = SURFACE_OF_LINEAR_EXTRUSION('',#9848,#9852);-#9848 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9849,#9850,#9851),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9849 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5450001- ));-#9850 = CARTESIAN_POINT('',(-0.527662217882,6.775933159722E-02,1.5450001- ));-#9851 = CARTESIAN_POINT('',(-0.519557834201,6.775933159722E-02,1.5450001- ));-#9852 = VECTOR('',#9853,1.);-#9853 = DIRECTION('',(0.,0.,1.));-#9854 = DEFINITIONAL_REPRESENTATION('',(#9855),#9859);-#9855 = LINE('',#9856,#9857);-#9856 = CARTESIAN_POINT('',(0.,0.));-#9857 = VECTOR('',#9858,1.);-#9858 = DIRECTION('',(0.,-1.));-#9859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9860 = ORIENTED_EDGE('',*,*,#9861,.F.);-#9861 = EDGE_CURVE('',#9754,#9832,#9862,.T.);-#9862 = SURFACE_CURVE('',#9863,(#9867,#9874),.PCURVE_S1.);-#9863 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9864,#9865,#9866),+#9638 = ORIENTED_EDGE('',*,*,#9639,.T.);+#9639 = EDGE_CURVE('',#9624,#9640,#9642,.T.);+#9640 = VERTEX_POINT('',#9641);+#9641 = CARTESIAN_POINT('',(3.41331674417E-03,-4.405110666061E-02,0.955)+ );+#9642 = SURFACE_CURVE('',#9643,(#9647),.PCURVE_S1.);+#9643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9644,#9645,#9646), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9864 = CARTESIAN_POINT('',(-0.552894422743,5.948784722222E-02,1.5450001+#9644 = CARTESIAN_POINT('',(2.543887007447E-02,-5.712475381281E-02,0.955 ));-#9865 = CARTESIAN_POINT('',(-0.544288736979,6.358181423611E-02,1.5450001+#9645 = CARTESIAN_POINT('',(1.552093085557E-02,-5.332502385232E-02,0.955 ));-#9866 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5450001- ));-#9867 = PCURVE('',#9769,#9868);-#9868 = DEFINITIONAL_REPRESENTATION('',(#9869),#9873);-#9869 = LINE('',#9870,#9871);-#9870 = CARTESIAN_POINT('',(0.,0.));-#9871 = VECTOR('',#9872,1.);-#9872 = DIRECTION('',(1.,0.));-#9873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9874 = PCURVE('',#8862,#9875);-#9875 = DEFINITIONAL_REPRESENTATION('',(#9876),#9880);-#9876 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9877,#9878,#9879),- .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9877 = CARTESIAN_POINT('',(1.3702256945E-02,0.118725043403));-#9878 = CARTESIAN_POINT('',(2.2307942709E-02,0.122819010417));-#9879 = CARTESIAN_POINT('',(3.0621202257E-02,0.124907769097));-#9880 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) -PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''- ) );-#9881 = ADVANCED_FACE('',(#9882),#9847,.F.);-#9882 = FACE_BOUND('',#9883,.F.);-#9883 = EDGE_LOOP('',(#9884,#9885,#9908,#9938));-#9884 = ORIENTED_EDGE('',*,*,#9831,.T.);-#9885 = ORIENTED_EDGE('',*,*,#9886,.T.);-#9886 = EDGE_CURVE('',#9809,#9887,#9889,.T.);-#9887 = VERTEX_POINT('',#9888);-#9888 = CARTESIAN_POINT('',(-0.519557834201,6.775933159722E-02,1.5050001- ));-#9889 = SURFACE_CURVE('',#9890,(#9894,#9901),.PCURVE_S1.);-#9890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9891,#9892,#9893),+#9646 = CARTESIAN_POINT('',(3.41331674417E-03,-4.405110666061E-02,0.955)+ );+#9647 = PCURVE('',#9355,#9648);+#9648 = DEFINITIONAL_REPRESENTATION('',(#9649),#9653);+#9649 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9650,#9651,#9652), .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);-#9891 = CARTESIAN_POINT('',(-0.535975477431,6.567057291667E-02,1.5050001- ));-#9892 = CARTESIAN_POINT('',(-0.527662217882,6.775933159722E-02,1.5050001- ));-#9893 = CARTESIAN_POINT('',(-0.519557834201,6.775933159722E-02,1.5050001- ));-#9894 = PCURVE('',#9847,#9895);-#9895 = DEFINITIONAL_REPRESENTATION('',(#9896),#9900);-#9896 = LINE('',#9897,#9898);-#9897 = CARTESIAN_POINT('',(0.,-4.E-02));-#9898 = VECTOR('',#9899,1.);-#9899 = DIRECTION('',(1.,0.));-#9900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +#9650 = CARTESIAN_POINT('',(0.132861744212,0.12146255433));+#9651 = CARTESIAN_POINT('',(0.129062014251,0.111544615111));+#9652 = CARTESIAN_POINT('',(0.11978809706,9.943700099997E-02));+#9653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' ) );-#9901 = PCURVE('',#8808,#9902);-#9902 = DEFINITIONAL_REPRESENTATION('',(#9903),#9907);+#9654 = ORIENTED_EDGE('',*,*,#9655,.T.);+#9655 = EDGE_CURVE('',#9640,#9656,#9658,.T.);+#9656 = VERTEX_POINT('',#9657);+#9657 = CARTESIAN_POINT('',(-3.600083132059E-02,-6.569024677459E-03,+ 0.955));+#9658 = SURFACE_CURVE('',#9659,(#9663),.PCURVE_S1.);+#9659 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9660,#9661,#9662),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9660 = CARTESIAN_POINT('',(3.41331674417E-03,-4.405110666061E-02,0.955)+ );+#9661 = CARTESIAN_POINT('',(-5.345382825776E-03,-3.722447317227E-02,+ 0.955));+#9662 = CARTESIAN_POINT('',(-3.600083132059E-02,-6.569024677459E-03,+ 0.955));+#9663 = PCURVE('',#9355,#9664);+#9664 = DEFINITIONAL_REPRESENTATION('',(#9665),#9669);+#9665 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9666,#9667,#9668),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9666 = CARTESIAN_POINT('',(0.11978809706,9.943700099997E-02));+#9667 = CARTESIAN_POINT('',(0.112961463571,9.067830143002E-02));+#9668 = CARTESIAN_POINT('',(8.23060150764E-02,6.002285293521E-02));+#9669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9670 = ORIENTED_EDGE('',*,*,#9671,.T.);+#9671 = EDGE_CURVE('',#9656,#9345,#9672,.T.);+#9672 = SURFACE_CURVE('',#9673,(#9677),.PCURVE_S1.);+#9673 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9674,#9675,#9676),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9674 = CARTESIAN_POINT('',(-3.600083132059E-02,-6.569024677459E-03,+ 0.955));+#9675 = CARTESIAN_POINT('',(-5.261659962239E-02,1.004674362435E-02,0.955+ ));+#9676 = CARTESIAN_POINT('',(-6.25345388413E-02,1.983587843782E-02,0.955)+ );+#9677 = PCURVE('',#9355,#9678);+#9678 = DEFINITIONAL_REPRESENTATION('',(#9679),#9683);+#9679 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9680,#9681,#9682),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9680 = CARTESIAN_POINT('',(8.23060150764E-02,6.002285293521E-02));+#9681 = CARTESIAN_POINT('',(6.569024677459E-02,4.340708463341E-02));+#9682 = CARTESIAN_POINT('',(5.590111196112E-02,3.34891454145E-02));+#9683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9684 = SHELL_BASED_SURFACE_MODEL('',(#9685));+#9685 = OPEN_SHELL('',(#9686));+#9686 = ADVANCED_FACE('',(#9687),#9701,.T.);+#9687 = FACE_BOUND('',#9688,.F.);+#9688 = EDGE_LOOP('',(#9689,#9712,#9728,#9744));+#9689 = ORIENTED_EDGE('',*,*,#9690,.T.);+#9690 = EDGE_CURVE('',#9691,#9693,#9695,.T.);+#9691 = VERTEX_POINT('',#9692);+#9692 = CARTESIAN_POINT('',(-3.883452824027E-02,-0.121848967547,0.955));+#9693 = VERTEX_POINT('',#9694);+#9694 = CARTESIAN_POINT('',(-1.352446257124E-03,-0.121848967547,0.955));+#9695 = SURFACE_CURVE('',#9696,(#9700),.PCURVE_S1.);+#9696 = LINE('',#9697,#9698);+#9697 = CARTESIAN_POINT('',(-3.883452824027E-02,-0.121848967547,0.955));+#9698 = VECTOR('',#9699,1.);+#9699 = DIRECTION('',(1.,-2.22044604925E-16,0.));+#9700 = PCURVE('',#9701,#9706);+#9701 = PLANE('',#9702);+#9702 = AXIS2_PLACEMENT_3D('',#9703,#9704,#9705);+#9703 = CARTESIAN_POINT('',(-9.60236842558E-02,-8.307884150904E-02,0.955+ ));+#9704 = DIRECTION('',(0.,0.,1.));+#9705 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#9706 = DEFINITIONAL_REPRESENTATION('',(#9707),#9711);+#9707 = LINE('',#9708,#9709);+#9708 = CARTESIAN_POINT('',(3.877012603755E-02,5.718915601553E-02));+#9709 = VECTOR('',#9710,1.);+#9710 = DIRECTION('',(0.,1.));+#9711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9712 = ORIENTED_EDGE('',*,*,#9713,.T.);+#9713 = EDGE_CURVE('',#9693,#9714,#9716,.T.);+#9714 = VERTEX_POINT('',#9715);+#9715 = CARTESIAN_POINT('',(-1.352446257124E-03,-0.203124547379,0.955));+#9716 = SURFACE_CURVE('',#9717,(#9721),.PCURVE_S1.);+#9717 = LINE('',#9718,#9719);+#9718 = CARTESIAN_POINT('',(-1.352446257123E-03,-0.121848967547,0.955));+#9719 = VECTOR('',#9720,1.);+#9720 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#9721 = PCURVE('',#9701,#9722);+#9722 = DEFINITIONAL_REPRESENTATION('',(#9723),#9727);+#9723 = LINE('',#9724,#9725);+#9724 = CARTESIAN_POINT('',(3.877012603755E-02,9.467123799868E-02));+#9725 = VECTOR('',#9726,1.);+#9726 = DIRECTION('',(1.,0.));+#9727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9728 = ORIENTED_EDGE('',*,*,#9729,.T.);+#9729 = EDGE_CURVE('',#9714,#9730,#9732,.T.);+#9730 = VERTEX_POINT('',#9731);+#9731 = CARTESIAN_POINT('',(-3.883452824027E-02,-0.203124547379,0.955));+#9732 = SURFACE_CURVE('',#9733,(#9737),.PCURVE_S1.);+#9733 = LINE('',#9734,#9735);+#9734 = CARTESIAN_POINT('',(-1.352446257123E-03,-0.203124547379,0.955));+#9735 = VECTOR('',#9736,1.);+#9736 = DIRECTION('',(-1.,2.22044604925E-16,0.));+#9737 = PCURVE('',#9701,#9738);+#9738 = DEFINITIONAL_REPRESENTATION('',(#9739),#9743);+#9739 = LINE('',#9740,#9741);+#9740 = CARTESIAN_POINT('',(0.12004570587,9.467123799868E-02));+#9741 = VECTOR('',#9742,1.);+#9742 = DIRECTION('',(0.,-1.));+#9743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9744 = ORIENTED_EDGE('',*,*,#9745,.T.);+#9745 = EDGE_CURVE('',#9730,#9691,#9746,.T.);+#9746 = SURFACE_CURVE('',#9747,(#9751),.PCURVE_S1.);+#9747 = LINE('',#9748,#9749);+#9748 = CARTESIAN_POINT('',(-3.883452824027E-02,-0.203124547379,0.955));+#9749 = VECTOR('',#9750,1.);+#9750 = DIRECTION('',(2.22044604925E-16,1.,0.));+#9751 = PCURVE('',#9701,#9752);+#9752 = DEFINITIONAL_REPRESENTATION('',(#9753),#9757);+#9753 = LINE('',#9754,#9755);+#9754 = CARTESIAN_POINT('',(0.12004570587,5.718915601553E-02));+#9755 = VECTOR('',#9756,1.);+#9756 = DIRECTION('',(-1.,0.));+#9757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9758 = SHELL_BASED_SURFACE_MODEL('',(#9759));+#9759 = OPEN_SHELL('',(#9760));+#9760 = ADVANCED_FACE('',(#9761),#9775,.T.);+#9761 = FACE_BOUND('',#9762,.F.);+#9762 = EDGE_LOOP('',(#9763,#9786,#9802,#9818,#9834,#9850,#9866,#9882,+ #9898,#9914,#9930,#9946,#9962,#9978,#9994,#10010,#10026,#10042,+ #10058,#10074,#10090,#10106,#10122,#10138,#10154,#10170,#10186,+ #10202));+#9763 = ORIENTED_EDGE('',*,*,#9764,.T.);+#9764 = EDGE_CURVE('',#9765,#9767,#9769,.T.);+#9765 = VERTEX_POINT('',#9766);+#9766 = CARTESIAN_POINT('',(-1.874104099157E-02,-0.32626155898,0.955));+#9767 = VERTEX_POINT('',#9768);+#9768 = CARTESIAN_POINT('',(-1.165679869235E-02,-0.307584920192,0.955));+#9769 = SURFACE_CURVE('',#9770,(#9774),.PCURVE_S1.);+#9770 = LINE('',#9771,#9772);+#9771 = CARTESIAN_POINT('',(-1.874104099157E-02,-0.32626155898,0.955));+#9772 = VECTOR('',#9773,1.);+#9773 = DIRECTION('',(0.354654234121,0.934997526318,0.));+#9774 = PCURVE('',#9775,#9780);+#9775 = PLANE('',#9776);+#9776 = AXIS2_PLACEMENT_3D('',#9777,#9778,#9779);+#9777 = CARTESIAN_POINT('',(-9.60236842558E-02,-0.241894673417,0.955));+#9778 = DIRECTION('',(0.,0.,1.));+#9779 = DIRECTION('',(-2.22044604925E-16,-1.,0.));+#9780 = DEFINITIONAL_REPRESENTATION('',(#9781),#9785);+#9781 = LINE('',#9782,#9783);+#9782 = CARTESIAN_POINT('',(8.436688556345E-02,7.728264326423E-02));+#9783 = VECTOR('',#9784,1.);+#9784 = DIRECTION('',(-0.934997526318,0.354654234121));+#9785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9786 = ORIENTED_EDGE('',*,*,#9787,.T.);+#9787 = EDGE_CURVE('',#9767,#9788,#9790,.T.);+#9788 = VERTEX_POINT('',#9789);+#9789 = CARTESIAN_POINT('',(1.133478767875E-02,-0.268685989749,0.955));+#9790 = SURFACE_CURVE('',#9791,(#9795),.PCURVE_S1.);+#9791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#9792,#9793,#9794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);