AT24C64D-SSHM-T

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="AT24C64D-SSHM-T">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="SCL" pad="6"/>         <connect gate="G$1" pin="SDA" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="AT24C64D-SSHM-T" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="LCSC_PN" value="C6487" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -26,13 +26,15 @@       "model_3d_step": "at24c64d-sshm-t.step",       "lbr": "at24c64d-sshm-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C6487"+    },     "pins": [       {         "number": "1",         "name": "A0",         "type": "input",-        "description": "Device address input bit 0. Hardwired to VCC or GND to set the LSB of the 3-bit device-select field in the I²C slave address, allowing up to eight AT24C64D devices on a single 2-wire bus. Internal pull-down to GND when left floating; Atmel recommends tying to a known state with ≤10 kΩ pull-up if used with VCC."+        "description": "Device address input bit 0. Hardwired to VCC or GND to set the LSB of the 3-bit device-select field in the I\u00b2C slave address, allowing up to eight AT24C64D devices on a single 2-wire bus. Internal pull-down to GND when left floating; Atmel recommends tying to a known state with \u226410 k\u03a9 pull-up if used with VCC."       },       {         "number": "2",@@ -56,25 +58,25 @@         "number": "5",         "name": "SDA",         "type": "bidirectional",-        "description": "I²C serial data. Bidirectional open-drain line; requires an external pull-up to VCC. Wire-ORable with any number of other open-drain / open-collector devices on the same 2-wire bus. Input capacitance 8 pF max."+        "description": "I\u00b2C serial data. Bidirectional open-drain line; requires an external pull-up to VCC. Wire-ORable with any number of other open-drain / open-collector devices on the same 2-wire bus. Input capacitance 8 pF max."       },       {         "number": "6",         "name": "SCL",         "type": "input",-        "description": "I²C serial clock input. Positive-edge clocks data into the EEPROM and negative-edge clocks data out. Schmitt-triggered, filtered input; 400 kHz at 1.7 V, up to 1 MHz at 2.5-5.0 V. Input capacitance 6 pF max."+        "description": "I\u00b2C serial clock input. Positive-edge clocks data into the EEPROM and negative-edge clocks data out. Schmitt-triggered, filtered input; 400 kHz at 1.7 V, up to 1 MHz at 2.5-5.0 V. Input capacitance 6 pF max."       },       {         "number": "7",         "name": "WP",         "type": "input",-        "description": "Write-Protect input. Tie to GND for normal read/write operation; tie to VCC to inhibit all write operations (full array protected). Internal pull-down to GND when floating; Atmel recommends always tying to a known state (≤10 kΩ if using a pull-up)."+        "description": "Write-Protect input. Tie to GND for normal read/write operation; tie to VCC to inhibit all write operations (full array protected). Internal pull-down to GND when floating; Atmel recommends always tying to a known state (\u226410 k\u03a9 if using a pull-up)."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply, 1.7 V to 5.5 V. Typical supply currents: 0.4 mA read / 2.0 mA write at 5.0 V; standby current 1 µA (1.7 V) / 6 µA (5.0 V). Absolute max 6.25 V."+        "description": "Device power supply, 1.7 V to 5.5 V. Typical supply currents: 0.4 mA read / 2.0 mA write at 5.0 V; standby current 1 \u00b5A (1.7 V) / 6 \u00b5A (5.0 V). Absolute max 6.25 V."       }     ],     "provenance": {