component
AT24C512C-SSHD-T
Public Made by Adomby adom
Microchip EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,19 +32,19 @@ "number": "1", "name": "A0", "type": "input",- "description": "Device address input bit 0. Hardwired to VCC or GND to set the least-significant bit of the I2C slave address, allowing up to eight AT24C512C devices to share one 2-wire bus. Internally pulled down to GND if left floating, but Atmel recommends tying to a known state (10k\u03a9 or less)."+ "description": "Device address input bit 0. Hardwired to VCC or GND to set the least-significant bit of the I2C slave address, allowing up to eight AT24C512C devices to share one 2-wire bus. Internally pulled down to GND if left floating, but Atmel recommends tying to a known state (10kΩ or less)." }, { "number": "2", "name": "A1", "type": "input",- "description": "Device address input bit 1. Hardwired to VCC or GND to help select one of up to eight devices on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10k\u03a9 or less)."+ "description": "Device address input bit 1. Hardwired to VCC or GND to help select one of up to eight devices on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10kΩ or less)." }, { "number": "3", "name": "A2", "type": "input",- "description": "Device address input bit 2 (MSB of the hardware address). Hardwired to VCC or GND for multi-device addressing on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10k\u03a9 or less)."+ "description": "Device address input bit 2 (MSB of the hardware address). Hardwired to VCC or GND for multi-device addressing on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10kΩ or less)." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "Serial data line for the 2-wire (I2C-compatible) interface. Bidirectional, open-drain (requires an external pull-up to VCC, typically 1.3k\u03a9 at 2.5-5V or 10k\u03a9 at 1.7V per AC spec). May be wire-ORed with any number of other open-drain/open-collector devices. Input capacitance 8pF max."+ "description": "Serial data line for the 2-wire (I2C-compatible) interface. Bidirectional, open-drain (requires an external pull-up to VCC, typically 1.3kΩ at 2.5-5V or 10kΩ at 1.7V per AC spec). May be wire-ORed with any number of other open-drain/open-collector devices. Input capacitance 8pF max." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "WP", "type": "input",- "description": "Write Protect input. When tied to GND, normal write operations are permitted; when tied directly to VCC, all writes to the memory array are inhibited (full-array protection). Internally pulled down to GND if left floating; Atmel recommends a hard tie or 10k\u03a9 or smaller pull resistor."+ "description": "Write Protect input. When tied to GND, normal write operations are permitted; when tied directly to VCC, all writes to the memory array are inhibited (full-array protection). Internally pulled down to GND if left floating; Atmel recommends a hard tie or 10kΩ or smaller pull resistor." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage. Operating range 1.7V to 3.6V (VCC1 variant) or 2.5V to 5.5V (VCC2 variant). Typical supply currents: 2.0mA (read at 400kHz, 5V) and 3.0mA (write at 400kHz, 5V); standby currents 1-6\u00b5A depending on VCC."+ "description": "Positive supply voltage. Operating range 1.7V to 3.6V (VCC1 variant) or 2.5V to 5.5V (VCC2 variant). Typical supply currents: 2.0mA (read at 400kHz, 5V) and 3.0mA (write at 400kHz, 5V); standby currents 1-6µA depending on VCC." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/at24c512c-sshd-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }