AT24C512C-SSHD-T

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="AT24C512C-SSHD-T">@@ -108,7 +120,15 @@         <connect gate="G$1" pin="SCL" pad="6"/>         <connect gate="G$1" pin="SDA" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="AT24C512C-SSHD-T" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip" constant="no"/>+          <attribute name="MOUSER_PN" value="556-AT24C512C-SSHD-T" constant="no"/>+          <attribute name="DIGIKEY_PN" value="AT24C512C-SSHD-TTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C12371" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -26,25 +26,29 @@       "model_3d_step": "at24c512c-sshd-t.step",       "lbr": "at24c512c-sshd-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "AT24C512C-SSHD-TTR-ND",+      "mouser": "556-AT24C512C-SSHD-T",+      "lcsc": "C12371"+    },     "pins": [       {         "number": "1",         "name": "A0",         "type": "input",-        "description": "Device address input bit 0. Hardwired to VCC or GND to set the least-significant bit of the I2C slave address, allowing up to eight AT24C512C devices to share one 2-wire bus. Internally pulled down to GND if left floating, but Atmel recommends tying to a known state (10kΩ or less)."+        "description": "Device address input bit 0. Hardwired to VCC or GND to set the least-significant bit of the I2C slave address, allowing up to eight AT24C512C devices to share one 2-wire bus. Internally pulled down to GND if left floating, but Atmel recommends tying to a known state (10k\u03a9 or less)."       },       {         "number": "2",         "name": "A1",         "type": "input",-        "description": "Device address input bit 1. Hardwired to VCC or GND to help select one of up to eight devices on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10kΩ or less)."+        "description": "Device address input bit 1. Hardwired to VCC or GND to help select one of up to eight devices on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10k\u03a9 or less)."       },       {         "number": "3",         "name": "A2",         "type": "input",-        "description": "Device address input bit 2 (MSB of the hardware address). Hardwired to VCC or GND for multi-device addressing on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10kΩ or less)."+        "description": "Device address input bit 2 (MSB of the hardware address). Hardwired to VCC or GND for multi-device addressing on a shared 2-wire bus. Internally pulled down to GND if left floating; Atmel recommends a hard tie or pull-resistor (10k\u03a9 or less)."       },       {         "number": "4",@@ -56,7 +60,7 @@         "number": "5",         "name": "SDA",         "type": "bidirectional",-        "description": "Serial data line for the 2-wire (I2C-compatible) interface. Bidirectional, open-drain (requires an external pull-up to VCC, typically 1.3kΩ at 2.5-5V or 10kΩ at 1.7V per AC spec). May be wire-ORed with any number of other open-drain/open-collector devices. Input capacitance 8pF max."+        "description": "Serial data line for the 2-wire (I2C-compatible) interface. Bidirectional, open-drain (requires an external pull-up to VCC, typically 1.3k\u03a9 at 2.5-5V or 10k\u03a9 at 1.7V per AC spec). May be wire-ORed with any number of other open-drain/open-collector devices. Input capacitance 8pF max."       },       {         "number": "6",@@ -68,13 +72,13 @@         "number": "7",         "name": "WP",         "type": "input",-        "description": "Write Protect input. When tied to GND, normal write operations are permitted; when tied directly to VCC, all writes to the memory array are inhibited (full-array protection). Internally pulled down to GND if left floating; Atmel recommends a hard tie or 10kΩ or smaller pull resistor."+        "description": "Write Protect input. When tied to GND, normal write operations are permitted; when tied directly to VCC, all writes to the memory array are inhibited (full-array protection). Internally pulled down to GND if left floating; Atmel recommends a hard tie or 10k\u03a9 or smaller pull resistor."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply voltage. Operating range 1.7V to 3.6V (VCC1 variant) or 2.5V to 5.5V (VCC2 variant). Typical supply currents: 2.0mA (read at 400kHz, 5V) and 3.0mA (write at 400kHz, 5V); standby currents 1-6µA depending on VCC."+        "description": "Positive supply voltage. Operating range 1.7V to 3.6V (VCC1 variant) or 2.5V to 5.5V (VCC2 variant). Typical supply currents: 2.0mA (read at 400kHz, 5V) and 3.0mA (write at 400kHz, 5V); standby currents 1-6\u00b5A depending on VCC."       }     ],     "provenance": {