component
AT24C32M
Public Made by Adomby adom
HGSEMI EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "at24c32m",+ "title": "AT24C32M",+ "brief": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HGSEMI EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "at24c32m" ],+ "component": {+ "mpn": "AT24C32M",+ "manufacturer": "HGSEMI",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/fd417c4ab9b82239876f1790bf004282.pdf",+ "parts": {+ "symbol": "at24c32m.kicad_sym",+ "footprint": "at24c32m.kicad_mod",+ "model_3d": "at24c32m.glb",+ "model_3d_step": "at24c32m.step",+ "lbr": "at24c32m.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "E0",+ "type": "input",+ "description": "Slave address input bit 0. Sets the least-significant bit of the I2C device address (A0), allowing hardware selection between up to 8 devices on the same bus. Internally pulled down to Vss when left floating."+ },+ {+ "number": "2",+ "name": "E1",+ "type": "input",+ "description": "Slave address input bit 1. Sets the middle bit of the I2C device address (A1). Internally pulled down to Vss when left floating."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Slave address input bit 2. Sets the most-significant bit of the hardware-selectable I2C device address (A2). Internally pulled down to Vss when left floating."+ },+ {+ "number": "4",+ "name": "Vss",+ "type": "power_in",+ "description": "Ground reference for the Vcc supply. Connect to the system 0 V rail."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data line. Bidirectional open-drain pin used for command, address, and data transfer. Requires an external pull-up resistor to Vcc (typical 1.3 k\u03a9 at 2.5-5.5 V, 10 k\u03a9 at 1.7 V). VOL = 0.4 V max at IOL = 2.1 mA."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input. Positive edge clocks data in and negative edge clocks data out. Maximum clock frequency 100 kHz / 400 kHz / 1 MHz depending on Vcc; Schmitt-triggered with input filtering for noise suppression."+ },+ {+ "number": "7",+ "name": "WCB",+ "type": "input",+ "description": "Write Control input, active low enable for writes. Tie to Vss to allow normal write operations; tie to Vcc to inhibit all writes to the memory array. Internally pulled down to Vss when left floating (writes enabled)."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage input. Operating range 1.7 V to 5.5 V. Recommended local decoupling of 100 nF to Vss close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/fd417c4ab9b82239876f1790bf004282.pdf",+ "pages": 20,+ "sha256": "7e4214ab634175eb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HGSEMI",+ "Package": "SOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "at24c32m"+ ],+ "discovery_pitch": "AT24C32M (HGSEMI) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/at24c32m-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }