AT24C128C-SSHM-T

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="AT24C128C-SSHM-T">@@ -108,7 +120,14 @@         <connect gate="G$1" pin="SCL" pad="6"/>         <connect gate="G$1" pin="SDA" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="AT24C128C-SSHM-T" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip" constant="no"/>+          <attribute name="DIGIKEY_PN" value="150-AT24C128C-SSHM-TTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C6478" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -26,25 +26,28 @@       "model_3d_step": "at24c128c-sshm-t.step",       "lbr": "at24c128c-sshm-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "150-AT24C128C-SSHM-TTR-ND",+      "lcsc": "C6478"+    },     "pins": [       {         "number": "1",         "name": "A0",         "type": "input",-        "description": "Device address input, bit 0. Hard-wired to GND or VCC to set the chip's I²C slave address, allowing up to eight AT24C128C devices on one bus. Internally pulled to GND via a weak pull-down (disengages above ~0.5×VCC); Microchip recommends tying to a known state. External pull-up (if used) should be ≤10 kΩ."+        "description": "Device address input, bit 0. Hard-wired to GND or VCC to set the chip's I\u00b2C slave address, allowing up to eight AT24C128C devices on one bus. Internally pulled to GND via a weak pull-down (disengages above ~0.5\u00d7VCC); Microchip recommends tying to a known state. External pull-up (if used) should be \u226410 k\u03a9."       },       {         "number": "2",         "name": "A1",         "type": "input",-        "description": "Device address input, bit 1. Hard-wired to GND or VCC to select the I²C slave address. Internally pulled down to GND when floating; tie to a known state. External pull-up ≤10 kΩ recommended."+        "description": "Device address input, bit 1. Hard-wired to GND or VCC to select the I\u00b2C slave address. Internally pulled down to GND when floating; tie to a known state. External pull-up \u226410 k\u03a9 recommended."       },       {         "number": "3",         "name": "A2",         "type": "input",-        "description": "Device address input, bit 2. Hard-wired to GND or VCC to select the I²C slave address. Internally pulled down to GND when floating; tie to a known state. External pull-up ≤10 kΩ recommended."+        "description": "Device address input, bit 2. Hard-wired to GND or VCC to select the I\u00b2C slave address. Internally pulled down to GND when floating; tie to a known state. External pull-up \u226410 k\u03a9 recommended."       },       {         "number": "4",@@ -56,13 +59,13 @@         "number": "5",         "name": "SDA",         "type": "bidirectional",-        "description": "I²C serial data - open-drain bidirectional input/output. Requires an external pull-up resistor to VCC (≤10 kΩ). May be wire-ORed with other open-drain devices on the same I²C bus."+        "description": "I\u00b2C serial data - open-drain bidirectional input/output. Requires an external pull-up resistor to VCC (\u226410 k\u03a9). May be wire-ORed with other open-drain devices on the same I\u00b2C bus."       },       {         "number": "6",         "name": "SCL",         "type": "input",-        "description": "I²C serial clock input. Commands and input data on SDA are latched on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Must be driven high or pulled up externally when the bus is idle."+        "description": "I\u00b2C serial clock input. Commands and input data on SDA are latched on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Must be driven high or pulled up externally when the bus is idle."       },       {         "number": "7",@@ -74,7 +77,7 @@         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply, 1.7V to 5.5V (2.5V to 5.5V required for 1 MHz Fast Mode Plus operation). Active current 3 mA max; standby current 6 µA max. Decouple with a local ceramic capacitor."+        "description": "Device power supply, 1.7V to 5.5V (2.5V to 5.5V required for 1 MHz Fast Mode Plus operation). Active current 3 mA max; standby current 6 \u00b5A max. Decouple with a local ceramic capacitor."       }     ],     "provenance": {