at24c04cdbvrg

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AT24C04CDBVRG",+    "manufacturer": "HANSCHIP semiconductor",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "EEPROM",+    "parts": {+      "symbol": "at24c04cdbvrg.kicad_sym",+      "footprint": "at24c04cdbvrg.kicad_mod",+      "model_3d": "at24c04cdbvrg-etched.glb",+      "model_3d_plain": "at24c04cdbvrg.glb",+      "model_3d_step": "at24c04cdbvrg-etched.step",+      "model_3d_step_plain": "at24c04cdbvrg.step",+      "lbr": "at24c04cdbvrg.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL",+        "type": "input",+        "description": "Serial Clock input for the 2-wire I2C interface. Provides the clock to the device and controls data flow; SDA input is latched on the rising edge of SCL and output data is clocked out on the falling edge. Requires an external pull-up resistor to VCC. Schmitt-trigger and spike-filtered input."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the power supply. Must be connected to the system ground."+      },+      {+        "number": "3",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial Data line for the 2-wire I2C interface. Open-drain bidirectional pin used to serially transfer command, address and data bytes; requires an external pull-up resistor to VCC. Schmitt-trigger and spike-filtered input."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Device power supply, 1.7 V to 5.5 V (absolute max +6.0 V). A local decoupling capacitor to GND is recommended. Operations at invalid VCC levels may produce spurious results."+      },+      {+        "number": "5",+        "name": "WP",+        "type": "input",+        "description": "Hardware Write Protection input. When tied to VCC, the entire memory array (and Identification Page) becomes write-protected (read-only); when tied to GND, write operations are enabled. Floating input is internally pulled down to GND. When driven high, device/word-address bytes are still acknowledged but data bytes are not."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}