at24c02m5

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AT24C02M5",+    "manufacturer": "HGSEMI",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "EEPROM",+    "parts": {+      "symbol": "at24c02m5.kicad_sym",+      "footprint": "at24c02m5.kicad_mod",+      "model_3d": "at24c02m5-etched.glb",+      "model_3d_plain": "at24c02m5.glb",+      "model_3d_step": "at24c02m5-etched.step",+      "model_3d_step_plain": "at24c02m5.step",+      "lbr": "at24c02m5.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL",+        "type": "input",+        "description": "I2C Serial Clock input. Positive edge clocks data in and negative edge clocks data out. Schmitt-trigger, noise-filtered input. Requires an external pull-up to VCC (typically 1.3 kΩ at 2.5-5.5 V, 10 kΩ at 1.7 V)."+      },+      {+        "number": "2",+        "name": "Vss",+        "type": "power_in",+        "description": "Ground reference for the VCC supply."+      },+      {+        "number": "3",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C Serial Data input/output. Open-drain, may be wire-OR'ed with other open-drain devices. Requires an external pull-up to VCC. Data out has VOL ≤ 0.4 V @ IOL = 2.1 mA (VCC = 3.0 V)."+      },+      {+        "number": "4",+        "name": "Vcc",+        "type": "power_in",+        "description": "Supply voltage. Operating range 1.7 V to 5.5 V. Standby current ≤ 1 µA @ 3.3 V, ≤ 3 µA @ 5.5 V. Absolute maximum 6.5 V."+      },+      {+        "number": "5",+        "name": "WCB",+        "type": "input",+        "description": "Write Control input, active low. Tie to VSS (or leave floating; internal pull-down to VSS) to allow normal write operations. Tie to VCC to inhibit all write operations and write-protect the entire memory array."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}