component
AT24C02D-SSHM-T
Public Made by Adomby adom
Microchip EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "at24c02d-sshm-t",+ "title": "AT24C02D-SSHM-T",+ "brief": "Microchip EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Microchip EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "at24c02d-sshm-t" ],+ "component": {+ "mpn": "AT24C02D-SSHM-T",+ "manufacturer": "Microchip",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a3e5cb7c75244996b261ade681df5647.pdf",+ "parts": {+ "symbol": "at24c02d-sshm-t.kicad_sym",+ "footprint": "at24c02d-sshm-t.kicad_mod",+ "model_3d": "at24c02d-sshm-t.glb",+ "model_3d_step": "at24c02d-sshm-t.step",+ "lbr": "at24c02d-sshm-t.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "A0",+ "type": "input",+ "description": "Hardware slave address input bit 0. Tied to VCC or GND to select one of eight device addresses on the I2C bus (forms the least-significant hardware address bit of the 7-bit slave address). Internally weakly pulled to GND when left floating; Atmel recommends driving to a defined level. CMOS input, trip point ~0.5 x VCC."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Hardware slave address input bit 1. Sets bit A1 of the 7-bit I2C slave address so up to eight devices can share one bus. Internally weakly pulled to GND if left floating; connect to VCC or GND for a defined state."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Hardware slave address input bit 2 (MSB of the three hardware address bits). Tie to VCC or GND to select one of eight device addresses on the shared I2C bus. Weak internal pull-down to GND if left unconnected."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device. Must be connected to the system ground."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data. Open-drain bidirectional pin; requires an external pull-up resistor (not to exceed 10 kOhm) to VCC. May be wire-ORed with other open-drain / open-collector devices on the same bus. Data is latched into the device on the rising edge of SCL and driven out on the falling edge."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input from the bus master. Must be pulled high through an external pull-up resistor or driven high when the bus is idle. Command and data present on SDA are latched in on the rising edge of SCL; output data on SDA is clocked out on the falling edge. Supports 400 kHz at 1.7V and 1 MHz at 2.5V."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to GND for normal write operations; tie to VCC to inhibit all write operations to the memory array (asserted high). Internally weakly pulled to GND if left floating; Atmel recommends driving to a known state."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Device power supply, 1.7V to 3.6V. Operation at invalid VCC voltages may produce spurious results and should not be attempted. Decouple to GND with a local bypass capacitor (typ. 100 nF)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a3e5cb7c75244996b261ade681df5647.pdf",+ "pages": 26,+ "sha256": "225b24fb78c7ba5a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "at24c02d-sshm-t"+ ],+ "discovery_pitch": "AT24C02D-SSHM-T (Microchip) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/at24c02d-sshm-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }