AT24C02C-STUM-T - Commit

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

distributor part numbers (digikey=AT24C02C-STUM-TTR-ND, lcsc=C94534). page.json only: this page's .lbr could not be rebuilt because the symbol pin numbers do not resolve against the footprint pad names (connect-pad-unresolved), and publishing a library that fails validate would be worse than leaving the old one. Once the footprint is fixed a rebuild will carry these into <technology> automatically.

Ray ·ee5d7766b7 ·2mo ago ·parent caa1ada

1 file changed +8−5

page.json+8−5

@@ -26,13 +26,16 @@       "model_3d_step": "at24c02c-stum-t.step",       "lbr": "at24c02c-stum-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "AT24C02C-STUM-TTR-ND",+      "lcsc": "C94534"+    },     "pins": [       {         "number": "1",         "name": "A0",         "type": "input",-        "description": "Device address input bit 0. Hard-wire to GND or VCC to select the device address on a shared I2C bus (up to 8 devices). Internally pulled down to GND when floating; Microchip recommends always tying to a known state (pull-up resistor ≤10 kΩ if used)."+        "description": "Device address input bit 0. Hard-wire to GND or VCC to select the device address on a shared I2C bus (up to 8 devices). Internally pulled down to GND when floating; Microchip recommends always tying to a known state (pull-up resistor \u226410 k\u03a9 if used)."       },       {         "number": "2",@@ -44,7 +47,7 @@         "number": "3",         "name": "A2",         "type": "input",-        "description": "Device address input bit 2. Hard-wire to GND or VCC for I2C bus device addressing. Internally pulled to GND if floating; recommended pull-up resistor value ≤10 kΩ."+        "description": "Device address input bit 2. Hard-wire to GND or VCC for I2C bus device addressing. Internally pulled to GND if floating; recommended pull-up resistor value \u226410 k\u03a9."       },       {         "number": "4",@@ -56,7 +59,7 @@         "number": "5",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data line. Open-drain bidirectional I/O; requires an external pull-up resistor (≤10 kΩ) to VCC. Wire-OR compatible with other open-drain devices on the same bus."+        "description": "I2C serial data line. Open-drain bidirectional I/O; requires an external pull-up resistor (\u226410 k\u03a9) to VCC. Wire-OR compatible with other open-drain devices on the same bus."       },       {         "number": "6",@@ -74,7 +77,7 @@         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Device power supply. Operating range 1.7V to 5.5V (2.5V to 5.5V for 1 MHz FM+ operation). Bypass with a 0.1 µF ceramic capacitor to GND close to the pin."+        "description": "Device power supply. Operating range 1.7V to 5.5V (2.5V to 5.5V for 1 MHz FM+ operation). Bypass with a 0.1 \u00b5F ceramic capacitor to GND close to the pin."       }     ],     "provenance": {