component
AT24C02C-STUM-T
Public Made by Adomby adom
Microchip EEPROM, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "A0", "type": "input",- "description": "Device address input bit 0. Hard-wire to GND or VCC to select the device address on a shared I2C bus (up to 8 devices). Internally pulled down to GND when floating; Microchip recommends always tying to a known state (pull-up resistor \u226410 k\u03a9 if used)."+ "description": "Device address input bit 0. Hard-wire to GND or VCC to select the device address on a shared I2C bus (up to 8 devices). Internally pulled down to GND when floating; Microchip recommends always tying to a known state (pull-up resistor ≤10 kΩ if used)." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "A2", "type": "input",- "description": "Device address input bit 2. Hard-wire to GND or VCC for I2C bus device addressing. Internally pulled to GND if floating; recommended pull-up resistor value \u226410 k\u03a9."+ "description": "Device address input bit 2. Hard-wire to GND or VCC for I2C bus device addressing. Internally pulled to GND if floating; recommended pull-up resistor value ≤10 kΩ." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data line. Open-drain bidirectional I/O; requires an external pull-up resistor (\u226410 k\u03a9) to VCC. Wire-OR compatible with other open-drain devices on the same bus."+ "description": "I2C serial data line. Open-drain bidirectional I/O; requires an external pull-up resistor (≤10 kΩ) to VCC. Wire-OR compatible with other open-drain devices on the same bus." }, { "number": "6",@@ -74,7 +74,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Device power supply. Operating range 1.7V to 5.5V (2.5V to 5.5V for 1 MHz FM+ operation). Bypass with a 0.1 \u00b5F ceramic capacitor to GND close to the pin."+ "description": "Device power supply. Operating range 1.7V to 5.5V (2.5V to 5.5V for 1 MHz FM+ operation). Bypass with a 0.1 µF ceramic capacitor to GND close to the pin." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/at24c02c-stum-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }