at24c01c-stum-t-tudi

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AT24C01C-STUM-T-TUDI",+    "manufacturer": "Tudi",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "EEPROM",+    "parts": {+      "symbol": "at24c01c-stum-t-tudi.kicad_sym",+      "footprint": "at24c01c-stum-t-tudi.kicad_mod",+      "model_3d": "at24c01c-stum-t-tudi-etched.glb",+      "model_3d_plain": "at24c01c-stum-t-tudi.glb",+      "model_3d_step": "at24c01c-stum-t-tudi-etched.step",+      "model_3d_step_plain": "at24c01c-stum-t-tudi.step",+      "lbr": "at24c01c-stum-t-tudi.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-trigger, filtered input; open-drain bus, requires an external pull-up to VCC."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference (0 V). Connect to system ground."+      },+      {+        "number": "3",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data I/O. Open-drain, may be wire-ORed with other open-drain/open-collector devices; requires an external pull-up to VCC. Bi-directional data transfer for the I2C 2-wire protocol."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage. Operating range 1.7 V to 5.5 V (400 kHz) or 2.5 V to 5.5 V (1 MHz). Absolute maximum 6.5 V."+      },+      {+        "number": "5",+        "name": "WP",+        "type": "input",+        "description": "Write Protect input. Tied to GND for normal read/write operation; tied to VCC to hardware write-protect the full 1K/2K array (see Table 2)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}