apx824-29w5g-7

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "APX824-29W5G-7",+    "manufacturer": "Diodes Incorporated",+    "package": "SOT-25",+    "pin_count": 5,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "apx824-29w5g-7.kicad_sym",+      "footprint": "apx824-29w5g-7.kicad_mod",+      "model_3d": "apx824-29w5g-7-etched.glb",+      "model_3d_plain": "apx824-29w5g-7.glb",+      "model_3d_step": "apx824-29w5g-7-etched.step",+      "model_3d_step_plain": "apx824-29w5g-7.step",+      "lbr": "apx824-29w5g-7.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "/RESET",+        "type": "output",+        "description": "Active-low reset output. Asserted (driven low) while VCC is below the negative-going threshold VTH- (2.93 V typ for -29 variant), during power-up, or on a watchdog time-out. Push-pull output; VOL <= 0.4 V at IOL = 1 mA, VOH >= 0.8 x VCC at IOH = -20 uA. Also asserts down to VCC >= 1.1 V per VRESET spec."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / device return. 0 V reference for VCC and all I/O."+      },+      {+        "number": "3",+        "name": "RESET",+        "type": "output",+        "description": "Active-high reset output (complement of /RESET). Driven high while a reset condition is present (VCC below VTH- or watchdog time-out) and low during normal operation. Push-pull; VOH >= 0.8 x VCC at IOH = -100 uA (VCC >= 1.8 V), VOL <= 0.4 V at IOL = 1 mA."+      },+      {+        "number": "4",+        "name": "WDI",+        "type": "input",+        "description": "Watchdog input. A positive or negative transition on WDI within the watchdog time-out interval ttout (1.6 s typ, 1.12-2.4 s) retriggers the watchdog. Missing an edge causes /RESET to assert (and RESET to go high) for delay time td (200 ms typ). Leaving WDI unconnected disables the watchdog. Input thresholds VIH = 0.7 x VCC, VIL = 0.3 x VCC; minimum pulse width 50 ns."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Operating supply input. Recommended range 1.1 V to 5.5 V (absolute max 6.0 V). Monitored against the negative-going threshold VTH- (2.93 V typ for the -29 variant, 2.80-3.05 V over -40 to 85 C). Bypass with a 0.1 uF ceramic capacitor close to the pin (per Note 5) for best threshold stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}