apx803-31sag-7

@@ -33,5 +33,48 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "APX803-31SAG-7",+    "manufacturer": "Diodes Incorporated",+    "package": "SOT-23",+    "pin_count": 3,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "apx803-31sag-7.kicad_sym",+      "footprint": "apx803-31sag-7.kicad_mod",+      "model_3d": "apx803-31sag-7-etched.glb",+      "model_3d_plain": "apx803-31sag-7.glb",+      "model_3d_step": "apx803-31sag-7-etched.step",+      "model_3d_step_plain": "apx803-31sag-7.step",+      "lbr": "apx803-31sag-7.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Connect to system ground."+      },+      {+        "number": "2",+        "name": "/RESET",+        "type": "output",+        "description": "Active-low, open-drain reset output. Asserted low while VCC is below the 3.08V threshold (VTH typ, min 3.04V / max 3.13V) and held low for the reset timeout period (typ 200ms, min 140ms) after VCC rises above VTH. Requires an external pull-up (typically to the monitored supply); can sink up to 20mA (abs max) with VOL ≤ 0.3V at ISINK = 1.2mA. Guaranteed valid down to VCC = 1V; becomes high-impedance below 1V."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "Operating voltage input and the supply rail being monitored. Recommended operating range 1.1V to 5.5V (abs max -0.3V to +6.0V). This -31 variant trips at VTH = 3.08V typ (3.04V min / 3.13V max) with ~40mV hysteresis. Bypass with a 100nF capacitor to GND close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}