component
APS11700LLHALT-0PL
Public Made by Adomby adom
Allegro MicroSystems LLC Linear Hall Sensors, SOT-23W. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,19 +32,19 @@ "number": "1", "name": "VCC", "type": "power_in",- "description": "Positive supply input, 3.3 V to 24 V operating range (40 V absolute max). Requires a 0.1 \u00b5F bypass capacitor to GND placed close to the device; on-board reverse-battery and overvoltage protection."+ "description": "Positive supply input, 3.3 V to 24 V operating range (40 V absolute max). Requires a 0.1 µF bypass capacitor to GND placed close to the device; on-board reverse-battery and overvoltage protection." }, { "number": "2", "name": "VOUT", "type": "output",- "description": "Open-drain NMOS switch output. Active-low ('L' polarity) - pulls to VOUT(SAT) (~100 mV @ 5 mA) when the magnetic field exceeds BOP; requires an external pull-up resistor (recommended \u2264 20 k\u03a9, e.g. 4.8 k\u03a9). Rated up to VOUT(OFF) = 24 V, IOUT = 40 mA max with internal short-circuit current limit of ~25 mA typ."+ "description": "Open-drain NMOS switch output. Active-low ('L' polarity) - pulls to VOUT(SAT) (~100 mV @ 5 mA) when the magnetic field exceeds BOP; requires an external pull-up resistor (recommended ≤ 20 kΩ, e.g. 4.8 kΩ). Rated up to VOUT(OFF) = 24 V, IOUT = 40 mA max with internal short-circuit current limit of ~25 mA typ." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Ground return for supply and output. Bypass capacitor CBYP (0.1 \u00b5F) connects between VCC and GND."+ "description": "Ground return for supply and output. Bypass capacitor CBYP (0.1 µF) connects between VCC and GND." } ], "provenance": {@@ -122,5 +122,8 @@ "docs/aps11700llhalt-0pl-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }