component
APL5934DKAI-TRG
Public Made by Adomby adom
Anpec Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -44,6 +44,20 @@ APL5934DKAI-TRG from Anpec Elec, in a SOP-8-EP. Pinout and pin descriptions extr - Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm` - 3D model: SOP-8-EP (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`apl5934dkai-trg.step`](apl5934dkai-trg.step) | 194 KB | You want the bare part, or you mark your own boards. |+| [`apl5934dkai-trg-etched.step`](apl5934dkai-trg-etched.step) | 2.2 MB | You want the part with `APL5934DKAI-TRG` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 573 faces against 63 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "apl5934dkai-trg",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Anpec Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+11−8@@ -4,7 +4,7 @@ "slug": "apl5934dkai-trg", "title": "APL5934DKAI-TRG", "brief": "Anpec Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -40,19 +40,19 @@ "number": "2", "name": "EN", "type": "input",- "description": "Active-high enable control pin. Holding EN below the enable threshold (~0.8V typical) shuts down the output; re-enabling triggers a new soft-start cycle. An internal ~3\u00b5A pull-low current pulls EN low when left open (initial-off for the /D variant), disabling the regulator by default."+ "description": "Active-high enable control pin. Holding EN below the enable threshold (~0.8V typical) shuts down the output; re-enabling triggers a new soft-start cycle. An internal ~3µA pull-low current pulls EN low when left open (initial-off for the /D variant), disabling the regulator by default." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Main power supply input (1.2V ~ 5.5V) used for voltage conversion to VOUT. A \u226510\u00b5F decoupling capacitor is recommended close to this pin to filter noise and improve transient response. The voltage on VIN is monitored by the Power-On-Reset circuit (rising VIN POR threshold ~0.9V)."+ "description": "Main power supply input (1.2V ~ 5.5V) used for voltage conversion to VOUT. A ≥10µF decoupling capacitor is recommended close to this pin to filter noise and improve transient response. The voltage on VIN is monitored by the Power-On-Reset circuit (rising VIN POR threshold ~0.9V)." }, { "number": "4", "name": "VCNTL", "type": "power_in",- "description": "Bias voltage input for the internal control circuitry (3.0V ~ 5.5V, +5V recommended). A 0.1\u00b5F decoupling capacitor is typically connected near this pin. VCNTL is also monitored by the Power-On-Reset circuit (rising VCNTL POR threshold ~2.7V)."+ "description": "Bias voltage input for the internal control circuitry (3.0V ~ 5.5V, +5V recommended). A 0.1µF decoupling capacitor is typically connected near this pin. VCNTL is also monitored by the Power-On-Reset circuit (rising VCNTL POR threshold ~2.7V)." }, { "number": "5",@@ -64,13 +64,13 @@ "number": "6", "name": "VOUT", "type": "power_out",- "description": "Regulated output pin (0.8V to VIN\u2212VDROP, up to 3A continuous / 4A peak). Requires a minimum 10\u00b5F output capacitor (MLCC applicable) for stability and transient response; total COUT scales with load per the datasheet (8-1100\u00b5F at 3A). During shutdown an internal ~85\u03a9 pull-down MOSFET quickly discharges VOUT."+ "description": "Regulated output pin (0.8V to VIN−VDROP, up to 3A continuous / 4A peak). Requires a minimum 10µF output capacitor (MLCC applicable) for stability and transient response; total COUT scales with load per the datasheet (8-1100µF at 3A). During shutdown an internal ~85Ω pull-down MOSFET quickly discharges VOUT." }, { "number": "7", "name": "FB", "type": "input",- "description": "Voltage feedback pin. Connect to the tap of an external resistor divider from VOUT to set the output voltage against the 0.8V internal reference (VOUT = 0.8V \u00d7 (1 + R1/R2)). FB input current is \u00b1100nA max."+ "description": "Voltage feedback pin. Connect to the tap of an external resistor divider from VOUT to set the output voltage against the 0.8V internal reference (VOUT = 0.8V × (1 + R1/R2)). FB input current is ±100nA max." }, { "number": "8",@@ -157,6 +157,9 @@ "docs/hero.png", "docs/apl5934dkai-trg-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]+ "viewers/footprint.html",+ "pads.json"+ ],+ "description": "Anpec Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "visibility": "public" }