ap7361c-18sp-13

@@ -33,5 +33,85 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "AP7361C-18SP-13",+    "manufacturer": "Diodes Incorporated",+    "package": "SOIC-8-EP",+    "pin_count": 9,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AP7361C-18SP-13.pdf",+    "parts": {+      "symbol": "ap7361c-18sp-13.kicad_sym",+      "footprint": "ap7361c-18sp-13.kicad_mod",+      "model_3d": "ap7361c-18sp-13-etched.glb",+      "model_3d_plain": "ap7361c-18sp-13.glb",+      "model_3d_step": "ap7361c-18sp-13-etched.step",+      "model_3d_step_plain": "ap7361c-18sp-13.step",+      "lbr": "ap7361c-18sp-13.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulator output, 1.8V fixed. Bypass to ground with at least 2.2µF ceramic capacitor; a larger capacitor improves AC load response. Delivers up to 1A output current with 1.5A typical current limit and fold-back short-circuit protection (~400mA into hard short)."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Enable input, active high. VIL ≤ 0.3V (off), VIH ≥ 1.0V up to VIN (on). Internal ~3.0MΩ pull-down keeps the regulator off when the pin floats; input leakage ±0.1µA typ at VIN=5.5V."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground; not required for operation."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return. Connect to the system ground plane; on SO-8EP the exposed thermal pad should also be tied to this net to meet the 100°C/W θJA rating."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground; not required for operation."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground; not required for operation."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground; not required for operation."+      },+      {+        "number": "8",+        "name": "IN",+        "type": "power_in",+        "description": "Regulator input supply, 2.2V-6.0V (6.5V absolute max). Bypass to ground with at least 1µF ceramic capacitor close to the pin; 4.7µF recommended for the typical application circuit."+      },+      {+        "number": "9",+        "name": "EP",+        "type": "passive",+        "description": "Exposed thermal pad on the underside of the SO-8EP package. Solder to a copper ground pour with thermal vias to achieve the 100°C/W θJA rating; electrically tie to GND."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}