component
AP7115-25WG-7
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Voltage input to the regulator. Operating range 2.5V to 5.5V (abs max 5.5V). Recommend a 1\u00b5F ceramic bypass capacitor to GND close to the pin."+ "description": "Voltage input to the regulator. Operating range 2.5V to 5.5V (abs max 5.5V). Recommend a 1µF ceramic bypass capacitor to GND close to the pin." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high chip enable input. Drive above VIH,EN (min 2.0V) to enable the regulator; drive below VIL,EN (max 0.7V) to place the device in shutdown (ISHUTDOWN ~0.1\u00b5A typ). Abs max 5.5V; leakage ~0.01\u00b5A typ."+ "description": "Active-high chip enable input. Drive above VIH,EN (min 2.0V) to enable the regulator; drive below VIL,EN (max 0.7V) to place the device in shutdown (ISHUTDOWN ~0.1µA typ). Abs max 5.5V; leakage ~0.01µA typ." }, { "number": "4", "name": "BP", "type": "passive",- "description": "Band-gap bypass pin. Connect an external capacitor (typ 0.1\u00b5F, or 1nF/10nF/100nF depending on desired soft-start rate) from BP to GND to filter reference noise and set the output soft-start time. May be left open at the cost of higher output noise and faster startup."+ "description": "Band-gap bypass pin. Connect an external capacitor (typ 0.1µF, or 1nF/10nF/100nF depending on desired soft-start rate) from BP to GND to filter reference noise and set the output soft-start time. May be left open at the cost of higher output noise and faster startup." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated voltage output. Fixed 2.5V for the -25 option (\u00b12% accuracy). Delivers up to 150mA with ~200mV dropout at full load. Requires a 1\u00b5F ceramic output capacitor to GND for stability."+ "description": "Regulated voltage output. Fixed 2.5V for the -25 option (±2% accuracy). Delivers up to 150mA with ~200mV dropout at full load. Requires a 1µF ceramic output capacitor to GND for stability." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/ap7115-25wg-7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }