component
AP5101SG-13
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -44,7 +44,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "On/Off Control Input. Pull above 1.2V to enable the converter; pull below 0.4V to shut down (0.1uA typical shutdown current). Must not be left floating; tie to VIN through a 100k\u03a9 resistor if unused. Absolute max 6V."+ "description": "On/Off Control Input. Pull above 1.2V to enable the converter; pull below 0.4V to shut down (0.1uA typical shutdown current). Must not be left floating; tie to VIN through a 100kΩ resistor if unused. Absolute max 6V." }, { "number": "4",@@ -62,13 +62,13 @@ "number": "6", "name": "COMP", "type": "output",- "description": "Loop-compensation node; output of the internal transconductance error amplifier (GEA \u2248 850 \u00b5A/V). Connect a series R-C network from COMP to GND to set the crossover frequency and phase margin."+ "description": "Loop-compensation node; output of the internal transconductance error amplifier (GEA ≈ 850 µA/V). Connect a series R-C network from COMP to GND to set the crossover frequency and phase margin." }, { "number": "7", "name": "BST", "type": "power_in",- "description": "Bootstrap supply for the high-side gate driver. Connect a capacitor (typ. 10nF, range 0.1uF to 100uF per DS) from BST to SW to form a floating supply that drives the internal power MOSFET gate above VIN. An external bootstrap diode from a 5V rail to BST is recommended when VIN \u2264 5V. Absolute max VSW + 6V."+ "description": "Bootstrap supply for the high-side gate driver. Connect a capacitor (typ. 10nF, range 0.1uF to 100uF per DS) from BST to SW to form a floating supply that drives the internal power MOSFET gate above VIN. An external bootstrap diode from a 5V rail to BST is recommended when VIN ≤ 5V. Absolute max VSW + 6V." }, { "number": "8",@@ -144,5 +144,8 @@ "docs/ap5101sg-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }