AP5056HSPER

@@ -0,0 +1,273 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AP5056HSPER",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 9,+      "span_mm": 7.24,+      "dash_mm": 0.181,+      "gap_mm": 0.1086,+      "pad_stroke_mm": 0.0434+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.552,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -2.348,+      2.348+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -2.205,+      2.205+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "ap5056hsper-etched.glb",+    "glb_sha256": "37865b0c80d6f683a8c47716c37945165fa900171ae63d7a7dafa882a5036d26",+    "footprint": "ap5056hsper.kicad_mod",+    "footprint_sha256": "a7971720bdda0353306df93e5fd71765420f318659baa75f0dc1e7a40c1d2eca",+    "pins": "page.json component.pins",+    "pins_sha256": "845e405e6c9cb63392efde6399b696642188ceb94289a687b1a08b815d09eeb5"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "TEMP",+      "x": -3.6,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "PROG",+      "x": -3.6,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "GND",+      "x": -3.6,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "VCC",+      "x": -3.6,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "BAT",+      "x": 3.6,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "STDBY",+      "x": 3.6,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "CHRG",+      "x": 3.6,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "CE",+      "x": 3.6,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        2.29,+        3.0+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "ap5056hsper",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "UMW Battery Management, SOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,11 +20,177 @@     "ap5056hsper.kicad_mod",     "ap5056hsper.glb",     "ap5056hsper.step",+    "ap5056hsper-etched.step",     "ap5056hsper.lbr",     "docs/hero.png",     "docs/ap5056hsper-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pads.json"-  ]-}\ No newline at end of file+    "pads.json",+    "ap5056hsper-etched.glb",+    "ap5056hsper-hero.glb",+    "ap5056hsper-hero.overlay.json"+  ],+  "component": {+    "mpn": "AP5056HSPER",+    "manufacturer": "UMW",+    "package": "SOP-8-EP",+    "pin_count": 9,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091747_UMW-Youtai-Semiconductor-Co---Ltd--AP5056HSPER_C7588047.pdf",+    "parts": {+      "symbol": "ap5056hsper.kicad_sym",+      "footprint": "ap5056hsper.kicad_mod",+      "model_3d": "ap5056hsper-hero.glb",+      "model_3d_plain": "ap5056hsper.glb",+      "model_3d_step": "ap5056hsper-etched.step",+      "model_3d_step_plain": "ap5056hsper.step",+      "lbr": "ap5056hsper.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TEMP",+        "type": "input",+        "description": "Battery temperature sense input. Connects to the wiper of an NTC thermistor divider on the battery pack; charging is inhibited when the pin voltage is outside the safe window (over-temperature / under-temperature protection)."+      },+      {+        "number": "2",+        "name": "PROG",+        "type": "passive",+        "description": "Charge-current program pin. An external resistor RPROG from PROG to GND sets the fast-charge current (RPROG=2k -> 500 mA typ; RPROG=1k -> 1000 mA typ). Also serves as a current-monitor output; VPROG is typ 1 V during current-mode charging."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground / VSS reference. All voltages are referenced to this pin."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Input supply from USB / adapter. Working range 4.25-5.5 V, absolute max 30 V, with input OVP tripping at typ 6.5 V. A ~10 uF bypass capacitor to GND is recommended."+      },+      {+        "number": "5",+        "name": "BAT",+        "type": "power_out",+        "description": "Charge current output to the Li-ion cell. Regulates to a preset 4.2 V float voltage (4.16-4.24 V) and sources up to ~1.4 A absolute max. A ~10 uF capacitor to GND is recommended for stability."+      },+      {+        "number": "6",+        "name": "STDBY",+        "type": "output",+        "description": "Standby / charge-complete status, open-drain, active-low. Pulls low (Vol <= 0.5 V at 5 mA) when charging has terminated (input present but cell fully charged); high-Z otherwise. Typically drives an indicator LED to VCC through a series resistor."+      },+      {+        "number": "7",+        "name": "CHRG",+        "type": "output",+        "description": "Charging status, open-drain, active-low. Pulls low (Vol <= 0.5 V at 5 mA) while a charge cycle is in progress; high-Z during standby or when charging is inhibited. Typically drives an indicator LED to VCC through a series resistor."+      },+      {+        "number": "8",+        "name": "CE",+        "type": "input",+        "description": "Chip enable input. Drive high (or leave pulled high through ~1 k as in the typical application) to enable charging; drive low to place the device in shutdown (supply current drops to ~180 uA). Absolute max VCE = 5.5 V."+      },+      {+        "number": "9",+        "name": "EPAD",+        "type": "power_in",+        "description": "Exposed thermal pad on the ESOP-8 package underside. Solder to a copper ground plane for heat dissipation; electrically tie to GND.",+        "source": "renumbered-to-footprint-pad"+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311091747_UMW-Youtai-Semiconductor-Co---Ltd--AP5056HSPER_C7588047.pdf",+        "pages": 13,+        "sha256": "6855644f44aa8f28",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "pin1": {+      "pad": "1",+      "at": [+        -2.475,+        -1.905+      ],+      "corner": "top-left",+      "source": "silk-marker",+      "derived_from": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm@sha256:a7971720bdda0353",+      "mark": "drawn"+    },+    "models_3d": [+      {+        "file": "ap5056hsper.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.55+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ap5056hsper-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.55+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "43aaf7e20addfbdfdb4af7b3aae1755dcc53c0c6aa899d0fc0b20d20645b2755",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "AP5056HSPER",+  "brief": "UMW Battery Management, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "UMW",+      "Package": "SOP-8-EP",+      "Category": "PMIC",+      "Pins": "9"+    }+  },+  "discovery_triggers": [+    "ap5056hsper"+  ],+  "discovery_pitch": "AP5056HSPER (UMW) component page with datasheet-verified CAD.",+  "visibility": "public"+}